General Electric JEM25 BF/WF, JEM31 BF/CF/WF/SF, ZEM200 SF/BF/WF, JE740 WH/BH, WK/BK, REM25 SJ, JE620 BF/WF microwave oven Installation Instructions

General Electric JEM25 BF/WF, JEM31 BF/CF/WF/SF, ZEM200 SF/BF/WF, JE740 WH/BH, WK/BK, REM25 SJ, JE620 BF/WF microwave oven Installation Instructions

Below you will find brief information for microwave oven JEM25 BF/WF, microwave oven JEM31 BF/CF/WF/SF, microwave oven ZEM200 SF/BF/WF, microwave oven JE740 WH/BH, microwave oven JE740 WK/BK, microwave oven REM25 SJ, microwave oven JE620 BF/WF. This document provides a set of instructions for installing a microwave oven. The guide explains how to prepare the oven for installation and how to connect the oven to power.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

General Electric Microwave Oven Installation Instructions | Manualzz

Template/Rear Bracket

Reference Guide

Pub. No. 4-A019-8

CAUTION:

• Before you begin—Read these instructions, Owner’s Manual and Important Safety Instructions completely and carefully.

• Do not alter or modify any part of this kit or the oven.

• Do not block vents or openings.

• Observe all governing codes and ordinances.

• Oven must be plugged into a properly grounded 3-hole, 120 volt receptacle as required by the National Electrical Code.

• Unplug the microwave oven before attempting installation of this kit.

• Save these instructions (for Local Inspectors and Future Reference).

This kit provides all the hardware and instructions needed to mount 0.6, 0.7 and

1.0 cu. ft. General Electric, Hotpoint and Monogram microwave ovens that are approved for mounting under kitchen cabinets.

The accessory kit includes an instruction book, 4 mounting templates and a set of mounting hardware. Select one mounting template and one set of rear brackets for the specific model to be installed.

Refer to the Installation Instructions book and the table below to determine which template and hardware (rear brackets) you should use for your particular model. Check the Electrical

Rating plate located inside the oven for your model number.

Model

JEM25BF/WF

JEM31BF/CF/WF/SF

ZEM200SF/BF/WF

JE740WH/BH

JE740WK/BK

REM25SJ

JE620BF/WF

Part No.

Template

Pub. No.

245B1790P032 31-1132

245B1790P032

245B1790P032

245B1790P073

--------------------

245B1790P032

205C1059P190

31-1132

31-1132

31-1170

49-40442

31-1132

49-40286

Rear Brackets

(See P. 2)

4B

4B

4B

4A

4C

4B

4C

Printed in the United States

01-05 JR Pub No. 31-1131-1

Parts List

Installation Parts List

The following is a list of the parts that you may need for installation of your microwave oven.

Remove all parts from the box and compare them with the parts list and illustration (Fig. 1) to be sure that none are missing. Use this time to become familiar with each piece.

Parts List

1. 3 sets of bolts

2. 2 In-cabinet mounting straps

3. 4 Templates

4A. 2 Rear brackets

4B. 2 Rear brackets

4C. 2 Rear brackets

Check the parts list and read all instructions completely before starting the installation. This will help you to become familiar with the process and make installation easier.

(NOTE: It is suggested that you gather all needed tools and installation parts in one location.)

FIG. 1

1 2

4A

9/16"

4B

1/2"

4C

1 1/4"

3

(A)

(B)

advertisement

Key Features

  • Easy to install
  • Mounting bracket included
  • Installation instructions provided
  • Compatible with multiple oven models
  • Includes hardware and templates

Frequently Answers and Questions

What models are compatible with this kit?
The kit is compatible with 0.6, 0.7 and 1.0 cu. ft. General Electric, Hotpoint and Monogram microwave ovens that are approved for mounting under kitchen cabinets.
What is included in the kit?
The kit includes an instruction book, 4 mounting templates and a set of mounting hardware. Select one mounting template and one set of rear brackets for the specific model to be installed.
How do I determine which template and hardware to use?
Refer to the Installation Instructions book and the table below to determine which template and hardware (rear brackets) you should use for your particular model. Check the Electrical Rating plate located inside the oven for your model number.

Related manuals

Download PDF

advertisement