null  User manual
Introduction
Connections
DV-S525
DVD Player
OPEN /CLOSE
DIMMER
STANDBY/ON
PAUSE
Basic Playback
Instruction Manual
PLAY
STOP
PHONES
PHONES LEVEL
POWER
ON
OFF
MIN
DVD / VIDEO CD / CD PLAYER
MAX
DV-S 525
THIS DVD PLAYER IS MANUFACTURED FOR PLAYBACK
OF REGION 1 (USA, CANADA) ENCODED DVD
SOFTWARE. USE OF SOFTWARE NOT INTENDED FOR
REGION 1 PLAYBACK MAY RESULT IN UNDESIRABLE
PLAYER PERFORMANCE.
Function Setup
Advanced Playback
STANDBY
Please read this manual thoroughly before making connections
and turning on the power.
Following the instructions in this manual will enable you to
obtain optimum performance and listening enjoyment from your
new DVD player.
Please retain this manual for future reference.
Others
Thank you for your purchase of the Onkyo DVD player.
Safety Precautions
“WARNING”
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
“TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.”
CAUTION:
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the product.
“TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.”
WARNING
AVIS
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
Important Safeguards
1. Read Instructions – All the safety and operating
instructions should be read before the appliance is
operated.
10. Power Sources – The appliance should be connected
to a power supply only of the type described in the
operating instructions or as marked on the appliance.
2. Retain Instructions – The safety and operating
instructions should be retained for future reference.
11. Polarization – If the appliance is provided with a
polarized plug having one blade wider than the other,
please read the following information: The polarization
of the plug is a safety feature. The polarized plug will
only fit the outlet one way. If the plug does not fit fully
into the outlet, try reversing it. If there is still trouble,
the user should seek the services of a qualified
electrician. Under no circumstances should the user
attempt to defeat the polarization of the plug.
3. Heed Warnings – All warnings on the appliance and in
the operating instructions should be adhered to.
4. Follow Instructions – All operating and use
instructions should be followed.
5. Water and Moisture – The appliance should not be
used near water – for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, and the like.
6. Carts and Stands – The appliance should be used
only with a cart or stand that is recommended by the
manufacturer.
PORTABLE CART WARNING
6A. An appliance and cart
combination should be
moved with care. Quick
stops, excessive force,
and uneven surfaces
may cause the
appliance and cart
combination to overturn.
13. Cleaning – The appliance should be cleaned only as
recommended by the manufacturer.
14. Nonuse Periods – The power cord of the appliance
should be unplugged from the outlet when left unused
for a long period of time.
S3125A
7. Wall or Ceiling Mounting – The appliance should be
mounted to a wall or ceiling only as recommended by
the manufacturer.
8. Ventilation – The appliance should be situated so that
its location or position does not interfere with its proper
ventilation. For example, the appliance should not be
situated on a bed, sofa, rug, or similar surface that may
block the ventilation openings; or if placed in a built-in
installation, such as a book case or cabinet that may
impede the flow of air through the ventilation openings,
there should be free space of at least 5 cm (2 in.) and
open up behind the appliance.
9. Heat – The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or
other appliances (including amplifiers) that produce heat.
2
12. Power- Cord Protection – Power-supply cords should
be routed so that they are not likely to be walked on or
pinched by items placed upon or against them,
especially wear plugs, convenience receptacles, and
the point where they exit from the appliance.
15. Object and Liquid Entry – Care should be taken so
that objects do not fall and liquids are not spilled into
the enclosure through openings.
16. Damage Requiring Service – The appliance should
be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been
damaged; or
B. Objects have fallen, or liquid has been spilled into
the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally
or exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure
damaged.
17. Servicing – The user should not attempt to service the
appliance beyond that described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
Precautions
DANGER:
Introduction
INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT
EXPOSURE TO BEAM.
CAUTION:
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
FOR EUROPEAN MODEL:
“CLASS 1 LASER
PRODUCT ”
This unit contains a semiconductor laser system and is classified as a "CLASS 1 LASER
PRODUCT." So, to use this model properly, read this Instruction Manual carefully. In case
of any trouble, please contact the store where you purchased the unit. To prevent being
exposed to the laser beam, do not try to open the enclosure.
This label on the rear panel of the unit states that:
1. This unit is a CLASS 1 LASER PRODUCT and employs a laser inside the cabinet.
2. To prevent the laser from being exposed, do not remove the cover. Refer servicing to
qualified personnel.
FOR U.S.A. MODEL:
This laser is covered by a housing which prevents exposure during operation or maintenance. However, this product
is classified as a Laser Product by CDRH (Center for Devices and Radiological Health) which is a department of the
Food and Drug Administration. According to their regulations 21 CFR section 1002.30, all manufactures who sell
Laser Products must maintain records of written communications between the manufacturer, dealers and customers
concerning radiation safety. If you have any complaints about instructions or explanations affecting the use of this
product, please feel free to write to the address on the back page of this manual. When you write us, please include
the model number and serial number of your DVD player.
In compliance with Federal Regulations, the certification, identification and the period of manufacture are indicated
on the real panel.
FCC INFORMATION FOR USER
CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, it not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING:
Changes or modifications made to this equipment, not expressly approved by Onkyo, or parties authorized by
Onkyo, could void the user’s warrantee of the equipment.
FOR CANADIAN MODEL:
(POUR LE MODELE CANADIEN)
• THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSION FROM
DIGITAL APPARATUS SET OUT IN THE RADIO INTERFERENCE REGULATIONS OF THE CANADIAN
DEPARTMENT OF COMMUNICATIONS.
• L'INTERFERENCE, RADIO ELECTRIQUE GENEREE PAR CET APPAREIL NUMERIQUE DE TYPE B NE
DEPASSE PAS LES LIMITES ENONCEES DANS LE REGLEMENT SUL LES PERTURBATIONS RADIO
ELECTRIQUES, SECTION APPAREIL NUMERIQUE, DU MINISTERE DES COMMUNICATIONS.
3
Precautions
FOR CANADIAN MODEL:
POUR LE MODELE CANADIEN:
For models having a power cord with a polarized plug.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
• THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSION FROM DIGITAL
APPARATUS SET OUT IN THE RADIO INTERFERENCE REGULATIONS OF THE CANADIAN DEPARTMENT OF
COMMUNICATIONS.
Sur les modèles dont la fiche est polarisée.
ATTENTION:
POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
• L’INTERFERENCE, RADIO ELECTRIQUE GENEREE PAR CET APPAREIL NUMERIQUE DE TYPE B NE DEPASSE PAS LES LIMITE
ENONCEES DANS LE REGLEMENT SUL LES PERTURBATIONS RADIO ELECTRIQUES, SECTION APPAREIL NUMERIQUE, DU
MINISTERE DES COMMUNICATIONS.
4
You can find the serial number on the rear panel. In case of
warranty claim, please report this number.
Notes on handling
When shipping the DVD player, the original shipping carton
and packing materials come in handy. For maximum
protection, repack the unit as it was originally packed at the
factory.
Do not use volatile liquids, such as insect spray, near the
DVD player. Do not leave rubber or plastic products in
contact with the DVD player for a long time. They will leave
marks on the finish.
The top and rear panels of the DVD player may become
warm after a long period of use. This is not a malfunction.
When the DVD player is not in use, be sure to remove the
disc and turn off the power.
If you do not use the DVD player for a long period, the unit
may not function properly in the future. Turn on and use the
DVD player occasionally.
Notes on placement
Notes on moisture condensation
Moisture condensation damages the DVD player.
Please read the following carefully.
Introduction
Warranty claim
Moisture condensation occurs, for example, when you pour a
cold drink into a glass on a warm day. Drops of water form on
the outside of the glass. In the same way, moisture may
condense on the optical pick-up lens inside this unit, one of
the most crucial internal parts of the DVD player.
Examples of moisture
condensation
Moisture condensation occurs during the
following cases.
When you bring the DVD player directly from a cold place
to a warm place.
When you use the DVD player in a room where you just
turned on the heater, or a place where the cold wind from
the air conditioner directly hits the unit.
In summer, when you use the DVD player in a hot and
humid place just after you move the unit from an air
conditioned room.
When you use the DVD player in a humid place.
When you place this DVD player near a TV, radio, or VCR,
the playback picture may become poor and the sound may
be distorted. In this case, place the DVD player away from
the TV, radio, or VCR.
Notes on cleaning
Use a soft, dry cloth for cleaning.
For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe it dry.
Do not use any type of solvent, such as thinner and
benzine, as they may damage the surface of the DVD
player.
If you use a chemical saturated cloth to clean the unit,
follow that product’s instructions.
To obtain a clear picture
The DVD player is a high technology, precision device. If the
optical pick-up lens and disc drive parts are dirty or worn
down, the picture quality becomes poor. To obtain a clear
picture, we recommend regular inspection and maintenance
(cleaning or parts replacement) every 1,000 hours of use
depending on the operating environment. For details, contact
your nearest dealer.
Do not use the DVD player when moisture
condensation may occur.
If you use the DVD player in such a situation, it may
damage discs and internal parts. Remove the disc, connect
the power cord of the DVD player to the wall outlet, turn on
the DVD player, and leave it for two or three hours. After
two or three hours, the DVD player will have warmed up
and evaporated any moisture. Keep the DVD player
connected to the wall outlet and moisture condensation will
seldom occur.
5
Features
Audiophile-class DVD/VIDEO CD/CD player
Component Video Outputs
Dolby* Digital Audio Output
10-Bit Video D/A conversion
Optical & Coaxial digital audio output
4-power picture zoom
Brushed aluminum front panel
DTS** Bitstream Digital Out
* Manufactured under license from Dolby Laboratories. “Dolby”
and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished Works. ©1992-1997
Dolby Laboratories, Inc. All rights reserved.
** "DTS" and "DTS Digital Surround" are trademarks of Digital
Theater Systems, Inc.
6
Table of Contents
Safety Precautions ................................... 2
Important Safeguards ............................... 2
Precautions ............................................ 3-5
Features .................................................... 6
Introduction
Introduction
Identification of Controls ...................... 8-11
Front panel/rear panel/DVD display
Remote controller
Preparing the remote controller
Operating with the remote controller
Connecting to a TV ................................. 12
Connecting to an Audio System and TV with
COMPONENT VIDEO Inputs .................. 13
Connections
Connections
Connecting to Optional Equipment ... 14, 15
Connecting to an amplifier equipped with a Dolby Digital decoder
Connecting to an amplifier equipped with a Dolby Pro logic Surround
Connecting to an amplifier equipped with a DTS decoder
Connecting to an amplifier equipped with a digital audio input
Playing a Disc .................................... 16-19
Basic playback
Playing fast in reverse or foward
Playing frame by frame
Playing in slow-motion
Resuming playback from the same location
Basic playback
Basic Playback
Locating a Specific Title, Chapter,
or Track ............................................. 20, 21
Locating a title using the title menu
Locating a title by entering the tittle
Locating a specific chapter or track directly
Locating a specific chapter or track
Advanced Playback
Entering the time of the desired location
Playing Repeatedly ................................. 23
Repeating a title, chapter, or track
Repeating a specific segment
Playing in a Favorite Order ..................... 24
Setting Titles, Chapters, or Tracks in a Favorite Order
Playing in Random Order ............................... 25
Playing titles in random order
Playing chapters or tracks in random order
Zooming a Picture .......................................... 26
Zooming a picture
Advanced playback
Playing From the Desired Location ......... 22
Selecting the Camera Angle ................... 27
Changing the camera angle
Selecting a Language ............................. 28
Selecting a playback audio setting
Selecting Subtitles .................................. 29
Selecting a subtitle language
To turn subtitles on or off
Viewing the Operational Informetion ....... 30
Checking the operational status
Checking the remaining time and setting status
Customizing the Function Settings .... 31-39
Selecting procedue
Setting details
Function setup
Function Setup
Table of Languages ................................ 40
Table of languages and their abbreviations
Others
On handling discs
On cleaning discs
On storing discs
About this instruction manual
Notes on region numbers
Playable discs
On VIDEO CDs
Notes on copyright
Others
Notes on Discs ....................................... 41
Before Calling Service Personnel ........... 42
Symptoms and Correction
Specifications ......................................... 43
7
Identification of Controls
See the page in
for details.
Front panel/rear panel/DVD display
■ Front panel
OPEN/CLOSE button
STANDBY/ON button
Remote contol
sensor
POWER switch
Disc tray
STOP button
DVD display
PLAY button
OPEN /CLOSE
PAUSE
DIMMER
STANDBY/ON
PLAY
STOP
PHONES
PHONES LEVEL
POWER
ON
MIN
OFF
STANDBY
DVD PLAYER
MAX
DV-S 525
PAUSE button
PHONES LEVEL knob
STANDBY indicator
Up/Down buttons
DIMMER button
PHONES jack
■ Rear panel
ANALOG
OUTPUT
VIDEO OUTPUT
COMPONENT
VIDEO OUTPUT
Y
CB
S VIDEO
VIDEO
D I G I TAL
OUTPUT
COAXIAL
REMOTE
CONTROL
Power cord
OPTICAL
L
CR
R
z REMOTE CONTROL jacks
COMPONENT VIDEO OUT jacks
Y•CB•CR
S VIDEO OUT jack
VIDEO OUT jack
Power plug
DIGITAL OPTICAL AUDIO OUT terminal
,
,
DIGITAL COAXIAL AUDIO OUT jack
,
,
ANALOG AUDIO OUT (L/R) jacks
,
,
Connections for remote control ( z )
When connecting ONKYO products, it is necessary to attach the z cable to be able to use the remote controller of the main component to
control the entire system.
1.To use this DVD player with an amplifier (or receiver), cassette tape deck and tuner with the z symbol, insert the remote control
cable plugs into the REMOTE CONTROL jacks.
2.As the exact connection sequence of the z cable is unimportant, you can connect from the amplifier (or receiver) to either the
tuner, the cassette tape deck or to the compact disc player.
3.If using an z equipped ONKYO amplifier (or receiver), to operate correctly, the remote control must face towards the remote
control sensor of the amplifier (or receiver).
Notes:
• The upper and lower z remote control jacks have the same function.
• Remote control operation is not possible when only the remote control cable is connected — the audio connection cables must also be
connected.
• An z remote control cable equipped with a 1/8" (3.5mm) diameter miniature two-conductor phone plug is included with this unit
and with every tuner, compact disc player or cassette tape deck with the z symbol.
8
Introduction
■ DVD display
• Pressing of the DIMMER button changes
the brightness of the Display.
Dimmed
Title number indicator
Connections
Normal
Angle icon indicator
MEMORY indicator
Operating status indicator
VCD/Audio CD indicator
DVD indicator
Repeat playback mode indicators
Chapter/track number/PBC
indicator
Total playing time/remaining time/elapsed time indicators
■ The indicators vary depending on the kinds of discs you play.
■ DVD video
■ VIDEO CD
■ Audio CD
• When closing the disc tray:
• When closing the disc tray:
• When closing the disc tray:
Example
RANDOM
MEMORY
Example
REMAIN
TITLE
PBC
TITLE
REPEAT
A - B ALL
DD
VD
DV
Total number of titles
Example
TR
TOTAL
REMAIN
REPEAT
A - B ALL
VCD
DVD
Total number of tracks
TITLE
CHP
DD
VD
DV
REMAIN
PBC
REPEAT
A - B ALL
RANDOM
MEMORY
VCD
DVD
TITLE
TOTAL
REMAIN
PBC
REPEAT
A - B ALL
Total playing
time of the disc
• During playback:
Example
TR
REMAIN
PBC
REPEAT
A - B ALL
Elapsed time
Elapsed time of
Playing track 6
of the current
the current title
title
Some DVD video may not display the chapter Some VIDEO CDs may not display the track
numbers or elapsed time.
numbers or elapsed time.
Playing chapter 3 in
title 2
TR
Total number of tracks
Example
RANDOM
MEMORY
TITLE
VCD
DVD
Total playing
time of the disc
• During playback:
• During playback:
RANDOM
MEMORY
PBC
RANDOM
MEMORY
TITLE
TR
REMAIN
PBC
REPEAT
A - B ALL
VCD
DVD
Playing track 6
Elapsed time
of the current
title
9
Identification of Controls (continued)
The instructions in this manual describe the controls on the remote controller. See the page in
for details.
Remote controller
OPEN/
CLOSE
POWER
POWER button
PLAY button
FR (fast reverse) button
DOWN button
STOP button
MENU button*
Direction buttons
,
,
ENTER button
,
TITLE button
AUDIO button
OPEN/CLOSE button
FR
PLAY
FF
PAUSE/STEP
DOWN
STOP
UP
SLOW
MENU
SETUP
SLOW button
UP button
SET UP button
ENTER
-
,
RETURN button
TITLE
RETURN
SUBTITLE button
AUDIO
ANGLE
SUBTITLE
SUBTITLE
ON/OFF
ANGLE button
RANDOM
Number buttons
-
FF (fast forward) button
PAUSE/STEP button
,
1
2
3
4
5
6
7
8
9
+10
0
SUBTITLE ON/OFF button
MEMORY
MEMORY button
ZOOM
CLEAR
A-B
REPEAT
SEARCH
RANDOM button
CLEAR button
ZOOMa button
REPEAT button
A-B button
DISPLAY
DISPLAY button
DIMMER
SEARCH button
DIMMER button
-
REMOTE CONTROLLER
RC-407DV
∗ MENU button
Use the MENU button to display
the menu screen included on
DVD video. To operate a menu
screen, follow the instructions in
“Locating a title using the title
.
menu”
10
1
Open the cover.
This section shows you how to use the remote controller.
Point the remote controller at the
remote sensor and press the
buttons.
OPEN /CLOSE
DIMMER
STANDBY/ON
PAUSE
PLAY
STOP
PHONES
PHONES LEVEL
POWER
ON
OFF
STANDBY
30°
2
Insert batteries (AA size).
MIN
DVD / VIDEO CD / CD PLAYER
MAX
DV-S 525
Introduction
Insert the batteries into the remote controller so you can use it
to operate the DVD player.
Operating with the remote controller
Connections
Preparing the remote controller
30°
Within about 5 m (16-11/16 feet)
OPEN/
CLOSE
POWER
FR
PLAY
FF
PAUSE/STEP
DOWN
STOP
UP
SLOW
MENU
SETUP
Distance: About 5 m(16-11/16 feet) from
the front of the remote sensor
Angle:
About 30° in each direction of
the front of the remote sensor
Make sure to match the + and – on the
batteries to the marks inside the battery
compartment.
3
Close the cover.
* Do not expose the remote sensor of the
DVD player to a strong light source such
as direct sunlight or illumination. If you do
so, you may not be able to operate the
DVD player with the remote controller.
Notes on the remote controller:
Notes on batteries:
• Direct the remote controller at the remote sensor of the DVD
player.
• Do not drop or give the remote controller a shock.
• Do not leave the remote controller near an extremely hot or humid
place.
• Do not spill water or put anything wet on the remote controller.
• Do not open the remote controller.
Improper use of batteries may cause battery leakage and corrosion.
To operate the remote controller correctly, follow the instructions
below.
• Do not insert the batteries into the remote controller in the wrong
direction.
• Do not charge, heat, open, or short-circuit the batteries. Do not
throw the batteries into a fire.
• Do not leave dead or exhausted batteries in the remote controller.
• Do not use different types of batteries together, or mix old and new
batteries.
• If you do not use the remote controller for a long period of time,
remove the batteries to avoid possible damage from battery
corrosion.
• If the remote controller does not function correctly or if the
operating range becomes reduced, replace all batteries with new
ones.
• If battery leakage occurs, wipe the battery liquid from the battery
compartment, then insert new batteries.
• The batteries should last about one year with normal use.
11
Connecting to a TV
For details of Output sound, see
.
Connect the DVD player to your TV.
Connecting to a TV
■ Setting of the output sound type
From the on-screen displays, set the “Audio Out Select” to “Analog 2ch”.
Improper connection
Insert completely
ANALOG
OUTPUT
VIDEO OUTPUT
COMPONENT
VIDEO OUTPUT
Y
CB
S VIDEO
VIDEO
D I G I TAL
OUTPUT
COAXIAL
REMOTE
CONTROL
To wall outlet
OPTICAL
L
CR
R
Power plug
To S VIDEO OUT
(white)
(yellow)
To
VIDEO
OUT
To ANALOG AUDIO OUT
(red)
Audio·video cable (supplied)
To audio inputs
(red)
(white)
(yellow)
To video input
Signal flow
S video cable (supplied)
To S video input
If the TV has an S video input, connect the
DVD player with the supplied S video cable.
TV or monitor with
audio video inputs
Notes:
• Refer to the instruction manual of the connected TV and how to activate TV input as well.
• When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making
any connections.
• If your television set has one audio input, connect the DVD player to a Y cable adapter (not supplied) and then connect to your TV.
• Connect the DVD player to your TV directly. If you connect the DVD player to a VCR, TV/VCR combination or video selector, the
playback picture may be distorted as DVD discs are copy protected.
Connecting headphones
Connect headphones to the PHONES jack on the front panel using a
stereo plug.
Before connecting, temporarily turn down the volume with the PHONES
LEVEL volume. Readjust to your preference when playback begins.
PLAY
STOP
PHONES
PHONES LEVEL
PHONES LEVEL
MIN
DVD / VIDEO CD / CD PLAYER
MAX
DV-S 525
MIN
12
MAX
Connecting to an Audio System or TV with
COMPONENT VIDEO Inputs
For details of Output sound, see
.
Connecting to an audio system and TV with COMPONENT VIDEO inputs
Connections
■ Setting of the output sound type
From the on-screen displays, set the “Audio Out Select” to “Analog 2ch”.
Improper connection
Insert completely
ANALOG
OUTPUT
VIDEO OUTPUT
COMPONENT
VIDEO OUTPUT
Y
CB
S VIDEO
VIDEO
Introduction
You can listen to the sound of audio CDs and DVD video in stereo and enjoy the enhanced picture quality of DVD
video on a TV with COMPONENT VIDEO inputs.
D I G I TAL
OUTPUT
COAXIAL
REMOTE
CONTROL
To wall outlet
OPTICAL
L
CR
R
Power plug
To Y
VIDEO
OUT
To CB
VIDEO
OUT
To CR
VIDEO
OUT
(white)
(red)
To ANALOG AUDIO OUT
Signal flow
(red)
To audio inputs
of the amplifier
(white)
Audio system
To CR video input
To CB video input
To Y video input
TV or monitor with
component signal inputs
COMPONENT VIDEO OUT (COLOR DIFFERENCE):
Some TVs or monitors are equipped with color difference inputs. Connecting to these inputs allows you to enjoy higher quality picture
playback.
Actual labels for color difference inputs may vary depending on the TV manufacturer. (ex. Y, B-Y, R-Y etc.)
In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust
the TV or monitor for optimum performance.
Notes:
• Refer to the instruction manual of the connected equipment as well.
• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall
outlet before making any connections.
• If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD player
away from the tuner and radio.
• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level.
Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the
speakers may be damaged.
13
Connecting to Optional Equipment
You can enjoy high quality dynamic sounds by connecting the DVD player to optional audio equipment.
For connection to your TV, see pages 12 and 13.
Select the connection type depending on your audio equipment.
Connecting to an amplifier equipped with a Dolby Digital decoder
Dolby Digital
ANALOG
OUTPUT
VIDEO OUTPUT
COMPONENT
VIDEO OUTPUT
VIDEO
D I G I TAL
OUTPUT
COAXIAL
REMOTE
CONTROL
OPTICAL
L
CR
CB
Y
S VIDEO
R
coaxial
cable
Signal flow
Optical digital cable
Connection
example
To COAXIAL type
digital audio input
To OPTICAL type digital
audio input
Amplifier equipped with
a Dolby Digital decoder
Front
speaker
(left)
Front
speaker
(right)
TV
Sub
woofer
Dolby Digital is the surround sound technology used in theaters
showing the latest movies, and is now available to reproduce
this realistic effect in the home. You can enjoy motion picture and
live concert DVD video with this dynamic realistic sound by
connecting the DVD player to a 6 channel amplifier equipped
with a Dolby Digital decoder or Dolby Digital processor. If you
have a Dolby Pro Logic Surround decoder, you will obtain the
full benefit of Pro Logic from the same DVD movies that provide
full 5.1-channel Dolby Digital soundtracks, as well as from titles
with the Dolby Surround mark.
• Use DVD video encoded via the Dolby Digital
recording system.
• Make the following setting
Setting
Select:
Page
Audio Out Select
Bitstream
,
Recording system
j
Center speaker
Surround
speaker (left)
Surround
speaker (right)
Connecting to an amplifier equipped with a Dolby Pro Logic Surround
Dolby Pro Logic Surround
ANALOG
OUTPUT
VIDEO OUTPUT
COMPONENT
VIDEO OUTPUT
Y
CB
S VIDEO
VIDEO
D I G I TAL
OUTPUT
COAXIAL
REMOTE
CONTROL
OPTICAL
L
CR
R
Signal flow
Connection
example
Audio cable
To audio input
Amplifier equipped with
Dolby Pro Logic
surround
You can enjoy the dynamic realistic sound of Dolby Pro Logic
Surround by connecting an amplifier and
speaker system (right and left front speakers, a center speaker,
and one or two rear speakers).
• With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in
“Connecting to an Amplifier equipped with a Dolby Digital
Decoder.” Refer to that amplifier’s owner’s manual and set
the amplifier so you can enjoy Dolby Pro Logic Surround
sound.
• With an amplifier not equipped with Dolby Digital
Front
speaker
(left)
Front
speaker
(right)
TV
Connect the equipment as follows.
• Make the following setting
Setting
Select:
Page
Audio Out Select
Analog 2ch
,
Center speaker
Surround speaker
Connect one or two surround speakers.
The output sound from the surround speakers will be monaural even if you
connect two surround speakers.
14
Note:
• Be sure to set "Audio Out Select" to "Analog 2ch" when you
enjoy sounds of Dolby Pro Logic Surround using this
connection.
Connecting to an Amplifier Equipped With a DTS Decoder
ANALOG
OUTPUT
VIDEO OUTPUT
COMPONENT
VIDEO OUTPUT
Y
CB
S VIDEO
D I G I TAL
OUTPUT
VIDEO
COAXIAL
REMOTE
CONTROL
OPTICAL
L
CR
R
coaxial cable
Signal flow
Optical digital
cable
To COAXIAL type
digital audio input
Connection
example
To OPTICAL type digital
audio input
Amplifier equipped with a
DTS decoder
Front
speaker
(left)
Front
speaker
(right)
TV
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and
now available for home use, on DVD video or audio CDs.
If you have a DTS decoder or processor, you can obtain the full
benefit or 5.1 channel DTS encoded sound tracks on DVD video
or audio CDs.
Connections
• Do not set “Audio Out Select to “Bitstream” from the menu
,
unless you are connecting (via the DIGITAL OUTPUT jack) an AV
decoder that has the Dolby Digital or Digital Theater System (DTS) decoding function. High volume sound may damage your hearing as
well as the speakers.
• When playing DTS-encoded discs (DVD video and audio CDs), excessive noise may be exhibited from the analog stereo jacks. To avoid
possible damage to the audio system, you should take proper precautions when the ANALOG OUTPUT jacks of the DVD player is
connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder
system must be connected to the DIGITAL OUTPUT jack of the DVD player.
Introduction
Warning
• Use DVD video or audio CDs encoded via the DTS
recording system.
• Make the following setting
Setting
Select:
Page
Audio Out Select
Bitstream
,
Recording system
DTS
Sub
woofer
Center speaker
Surround
speaker (left)
Surround
speaker (right)
Connecting to an amplifier equipped with a digital audio input
ANALOG
OUTPUT
VIDEO OUTPUT
COMPONENT
VIDEO OUTPUT
Y
CB
S VIDEO
VIDEO
D I G I TAL
OUTPUT
COAXIAL
REMOTE
CONTROL
OPTICAL
L
CR
R
2 Channel Digital Stereo
You can enjoy the dynamic sound of 2 Channel Digital Stereo
by connecting an amplifier equipped with a digital audio input
and speaker system (right and left front speakers).
coaxial cable
Signal flow
Connection
example
Optical digital
cable
To COAXIAL type
digital audio input
To OPTICAL type digital
audio input
Amplifier equipped with a
Digital Audio Input
Front
speaker
(left)
TV
• Make the following setting
Setting
Select:
Page
Audio Out Select
PCM
,
Front
speaker
(right)
Notes:
• DO NOT connect the DIGITAL OUTPUT jack of the DVD player to the AC-3 RF input of a Dolby Digital Receiver. This input on you’re A/V
Receiver is reserved for Laserdisc use only and is incompatible with the DIGITAL OUTPUT jack of the DVD player.
• Connect the DIGITAL OUTPUT jack of the DVD player to the “DIGITAL” or “COAXIAL” input of a Receiver or Processor.
• Refer to the Instruction manual of the connected equipment as well.
• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before
making any connections.
• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise,
the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the speakers may be
damaged.
15
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to may cause serious personal injury.
Playing a Disc
DVD display
POWER switch
3
STANDBY/ON button
OPEN /CLOSE
2
STOP
4
PLAY
STOP
OPEN /CLOSE
DIMMER
STANDBY/ON
PAUSE
PHONES
PLAY
STOP
PHONES LEVEL
POWER
ON
MIN
OFF
STANDBY
DVD / VIDEO CD / CD PLAYER
MAX
DV-S 525
DIMMER
STANDBY/ON
PAUSE
PHONES
PHONES LEVEL
POWER
ON
MIN
OFF
STANDBY
This section shows you the basics on
how to play back a disc.
DVD / VIDEO CD / CD PLAYER
MAX
DV-S 525
PAUSE
Up/Down
STANDBY indicator
Basic playback
Preparations
• When you want to view a disc, turn on the TV and select the video input connected to the DVD player.
• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected to the DVD player.
• For connection details, see "Connections".
1
POWER
ON
OFF
Note:
Connecting the power supply.
You cannot use the remote controller if the
POWER button on the DVD player is set to
OFF.
1. Plug the power cord into an AC wall outlet.
2. Press the POWER switch.
The STANDBY indicator on the player illuminates.
STANDBY
2
OPEN/
CLOSE
3. Press the STANDBY/ON button or POWER button on the
remote controller to turn on the DVD player. The display
lights up and the STANDBY indicator goes off.
Press OPEN/CLOSE.
Note:
You can open the disc tray by pressing this
button even if the DVD player is turned off.
The disc tray opens. It may take a few seconds before the
system power actually turns ON. If the tray does not open,
press the OPEN/CLOSE button again.
3
Notes:
Place the disc on the
disc tray.
E
OPEN
With the playback side down
/CLOS
E
PAUS
R
DIMME
4
PLAY
Note:
Press PLAY.
The disc tray closes and playback starts.
If you insert a DVD video that contains a title menu, or insert a
PBC (Playback Control)-equipped VIDEO CD, a menu screen
.
may appear. See “Locating a title using the title menu”
To start playback of a PBC-equipped VIDEO CD from the menu
screen, set “PBC” to “ON” via the on-screen displays.
First Setup screen
The First Setup screen appears
only once when the DVD player
is turned on for the first time.
From this screen, make the
following settings.
ONKYO
Thank you for your purchase of our DVD Player.
Please make a selection
for On-Screen Language and your TV shape and
press ENTER button on your remote control.
FIRST SETUP
On-Screen Language
TV Shape
On-screen Language: Select the
appropriate on-screen language.
TV Shape: Select a picture size
according to the aspect ratio of
for details.)
your TV (See
16
• There are two different disc sizes. Place the
disc in the correct guide on the disc tray. If the
disc is out of the guide, it may damage the disc
and cause the DVD player to malfunction.
• Do not place anything except DVD videos or
audio CDs on the disc tray.
ENG
4:3LB
To select the items
on the screen.
ENTER
After selecting an
items, press this.
• For PBC (Playback Control) of VIDEO CDs,
see “On VIDEO CD”
.
• You may need to press the TITLE or MENU
button to display the menu screen depending
on the DVD videos.
Tip: If the disc has already been set in the tray,
pressing the PLAY button starts playback while
the system is in STANDBY status.
1. Press the /
buttons to select “On-Screen Language,” and press
the ENTER button.
2. Select a language using the / buttons, and press the ENTER button.
3. Press the
button to select “TV Shape,” and press the ENTER button.
4. Select a picture size (see
) using the /
buttons, and press
the ENTER button.
5. Finally press the SETUP button.
All your selections are entered and the First Setup screen
disappears.
To change your settings, see “Customizing the Function Settings.”
STOP
MENU
TITLE
2
OPEN/
CLOSE
POWER
FR
PLAY
FF
PAUSE/STEP
DOWN
STOP
UP
SLOW
MENU
PAUSE/STEP
SETUP
/
/
ENTER
ENTER
TITLE
RETURN
AUDIO
ANGLE
SUBTITLE
1
2
3
4
5
6
7
8
9
+10
0
/
SUBTITLE
ON/OFF
RANDOM
MEMORY
ZOOM
CLEAR
A-B
REPEAT
About DVD VCD CD
The DVD VCD CD icons on the heading bar show the playable
discs for the function described under that heading.
SEARCH
DISPLAY
DIMMER
REMOTE CONTROLLER
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during a
normal broadcast may appear on the TV screen while playing a
DVD video because the high resolution pictures on these discs
include a lot of information. While the amount of noise depends on
the TV you use with this DVD player, you should generally reduce
the sharpness adjustment on your TV when viewing DVD videos.
DVD
: You can use this function with DVD videos
VCD
: You can use this function with VIDEO CDs
CD
: You can use this function with audio CDs
RC-407DV
DVD
To pause playback (still mode)
PAUSE/STEP
Press PAUSE/STEP during
playback.
To resume normal playback, press the
PLAY button.
• The sound is muted during still mode.
VCD
CD
About the screen saver
If you pause a picture of a DVD video and leave it still
for a long while, the screen saver of the DVD player
automatically appears (when “Screen Saver” is set to
). To turn off the screen saver, press the PLAY
“On”
button.
To stop playback
STOP
Press STOP.
Basic Playback
1
4
To remove the disc
OPEN/
CLOSE
Press OPEN/CLOSE.
E
OPEN
/CLOS
E
PAUS
R
DIMME
Remove the disc after the disc tray
opens completely.
• Be sure to press the OPEN/CLOSE
button to close the disc tray after you
remove the disc.
Notes:
• Do not move the DVD player during playback. Doing so may damage the disc.
• Use the OPEN/CLOSE button on the remote controller or DVD player to open and close the disc tray. Do not push the disc tray while
it is moving. Doing so may cause the DVD player to malfunction.
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD player to malfunction.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen menu
may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the STOP button on
your remote controller once the movie is completed.
17
PLAY
Playing a Disc (continued)
OPEN/
CLOSE
POWER
FR
PLAY
FF
PAUSE/STEP
DOWN
STOP
UP
SLOW
MENU
SETUP
FF
PAUSE/STEP
FR
ENTER
TITLE
AUDIO
RETURN
ANGLE
SUBTITLE
SUBTITLE
ON/OFF
RANDOM
2
8
30
1
2
3
4
5
6
7
8
9
+10
0
MEMORY
ZOOM
CLEAR
A-B
REPEAT
SEARCH
DISPLAY
DIMMER
Fast reverse
Fast forward
SlowMotion
Last
Play
REMOTE CONTROLLER
RC-407DV
You can play discs at various speeds, and resume playback from the
location where you stopped playback.
DVD
VCD
DVD
CD
Playing fast in reverse or forward
Playing frame by frame
Press FR or FF during playback.
PAUSE/STEP
FR
FF
• DVD video
The playback speed becomes x2 the
normal speed.
Each time you press the FR or FF button,
the playback speed changes.
FR:
FF:
Press PAUSE/STEP during still
playback.
Each time you press the PAUSE/STEP
button, the picture advances one frame.
To resume normal playback
Fast reverse playback
Fast forward playback
PLAY
Press PLAY.
TV screen
×2s
×2 the
normal speed
×8s
× 30 s
×8 the
normal speed
×30 the
normal speed
• VIDEO CD/Audio CD
The fast reverse or fast forward playback
alternates between two speeds.
TV screen
FR
FF
a FR1
a FR2
Fast reverse
playback
FF1 s
FF2 s
Fast forward
playback
To resume normal playback
PLAY
Press PLAY.
Notes:
• The DVD player does not play back sound and subtitles during
scan reverse and forward of DVD videos. However, the DVD player
plays back sound during fast forward or fast reverse playback of
audio CDs.
• The playback speed may differ depending on the disc.
18
VCD
Note:
The sound is muted during frame by frame playback.
OPEN/
CLOSE
POWER
FR
PLAY
FF
PAUSE/STEP
DOWN
STOP
UP
SLOW
MENU
SETUP
OPEN/
CLOSE
POWER
PLAY
SLOW
FR
PLAY
FF
PAUSE/STEP
DOWN
STOP
UP
SLOW
MENU
ENTER
ENTER
TITLE
TITLE
RETURN
ANGLE
AUDIO
SUBTITLE
RETURN
ANGLE
SUBTITLE
SUBTITLE
ON/OFF
1
2
3
4
5
6
7
8
9
+10
0
SUBTITLE
ON/OFF
RANDOM
MEMORY
ZOOM
CLEAR
A-B
RANDOM
1
2
3
4
5
6
7
8
9
+10
0
REPEAT
SEARCH
CLEAR
A-B
REPEAT
SEARCH
DISPLAY
DISPLAY
DIMMER
REMOTE CONTROLLER
MEMORY
ZOOM
DIMMER
RC-407DV
REMOTE CONTROLLER
DVD
RC-407DV
DVD
VCD
Playing in slow-motion
CD
Resuming playback from the same location
1
Press SLOW during playback.
SLOW
Press STOP e at the location
where you want to interrupt
playback.
STOP
Each time you press the SLOW
button, the slow-motion speed changes.
• The DVD player memorizes the location
where playback is stopped.
TV screen
1/2 s
1/4 s
1/8 s
2
1/2 the
normal speed
VCD
1/4 the
normal speed
Press PLAY.
PLAY
The DVD player resumes playback from
the location where you stopped playback.
1/8 the
normal speed
button during
If you press the SLOW
playback, you can view the picture in
reverse slow-motion.(only when using a
DVD video.)
Each time you press the SLOW
button, the slow-motion speed changes.
Basic Playback
AUDIO
2
1
SETUP
To start playback from the beginning regardless
of the location where you stopped playback.
1. Press STOP twice.
To resume normal playback
STOP
The DVD video’s memory is cleared.
PLAY
Press PLAY.
2. Press PLAY.
PLAY
If you are using a DVD video, playback starts
form the beginning of the current title.
If you are using a VIDEO CD/audio CD,
playback starts from the beginning of the
disc.
• If you want to return to the beginning of a
DVD video, open and close the disc tray
once with the OPEN/CLOSE button before
pressing the PLAY button.
Note:
The sound is muted during slow-motion playback.
Notes:
• The DVD player’s memory is also cleared when:
– you unplug the DVD player from the wall outlet after you stop
playback.
– you open the disc tray.
– you change parental lock setting
or select a disc menu
language setting
.
• There may be a difference of the location where playback resumes
depending on the disc.
• Settings you changed using the on-screen displays while the DVD
player keeps a location in the memory may function only after the
memory is cleared.
19
Locating a Specific Title, Chapter, or Track
DVD video disc
Title 1
Title 2
VIDEO CD/ Audio CD
Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3
Track 2
Track 1
Track 3
Track 4
Track 5
Normally, DVD videos are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs and audio
CDs are divided into tracks. You can quickly locate any specific title, chapter, or track.
DVD
DVD
Locating a title using the title menu
enu
Locating a title by entering the title
number
1
1
TITLE
Press TITLE.
Press SEARCH.
SEARCH
The title menu appears on the TV screen.
Make sure that the space next to Title is
highlighted.
(You can shift the highlight using the
/ buttons.)
e.g.
Example of a title menu
TITLE 1
TITLE 2
1
T i t l e:
Chapter :
TITLE 3
1
TITLE 4
2
1
2
3
4
5
6
7
8
9
+10
0
Press the corresponding number
buttons for the title you want.
e.g. To select title 2
2
Press / / /
title you want.
ENTER
3
ENTER
to select the
If the titles in the title menu are assigned
a number, you can directly locate a
specific title by pressing its assigned
number with the number buttons.
Press ENTER.
• The instructions above describe basic procedures which may vary
depending on the contents of the DVD video. If different
instructions appear on the TV screen, follow those instructions.
• If you display the title menu during playback and press the TITLE
button again without selecting any title, the DVD player resumes
playback from the point where you first pressed the TITLE button.
(depending on the actual DVD video)
• This method of locating a title is available only on a disc that
contains a title menu.
• Instruction notes of discs may refer to the button that displays the
title menu as TOP MENU button.
20
1
To select title 12
1
1
3
PLAY
2
2
T i t l e: 12
Chapter :
1
Press PLAY.
Playback starts from chapter 1 of the
selected title.
Playback starts from chapter 1 of the
selected title.
Notes:
T i t l e:
2
Chapter :
2
2
Notes:
• This method of locating a title is available only on a disc that
contains a title numbers.
• Pressing the CLEAR button resets the Title and Chapter numbers.
To clear the Title and Chapter display, press the SEARCH button
several times.
PLAY
OPEN/
CLOSE
POWER
FR
PLAY
FF
PAUSE/STEP
DOWN
STOP
UP
SLOW
MENU
DOWN
UP
/
/ /
ENTER
TITLE
Number buttons
CLEAR
SETUP
ENTER
TITLE
AUDIO
RETURN
ANGLE
SUBTITLE
SUBTITLE
ON/OFF
RANDOM
1
2
3
4
5
6
7
8
9
+10
0
MEMORY
ZOOM
CLEAR
A-B
REPEAT
SEARCH
DISPLAY
DIMMER
SEARCH
DVD
VCD
Press SEARCH.
SEARCH
DVD
CD
Locating a specific chapter or track directly
1
RC-407DV
DOWN
2
1
T i t l e:
Chapter :
UP
1
1
2
3
4
5
6
7
8
9
+10
0
Press Down
or Up
repeatedly to display the chapter or
track number you want.
The DVD player starts playback from the
selected chapter or track.
Press the corresponding number
buttons of the chapter or track you
want.
: To locate preceding chapters or
tracks
When you press the DOWN
button, the DVD player starts
playback from the beginning of the
current chapter or track.
When you press the DOWN
button twice, the DVD player starts
playback from the beginning of the
preceding chapter or track.
You can use the +10 button to select
numbers from 10 through 99.
:To locate succeeding chapters or
tracks
Press
to highlight the space
next to Chapter.
1
T i t l e:
Chapter :
e.g. DVD video
3
CD
Locating a specific chapter or track
Skip steps 1 and 2 if you are using an
VIDEO CD/audio CD.
e.g. DVD video
VCD
1
Basic Playback
REMOTE CONTROLLER
e.g. To select chapter or track 25
(VIDEO/
(DVD video disc) Audio CD)
4
PLAY
•
2
2
5
2
•
+10
2
+10
2
Title: 1
25
Chapter :
Track : 2 5
5
2
Press PLAY.
Playback starts from chapter 1 of the
selected title.
Notes:
• Some titles may not display chapter numbers.
, you can access chapters
• When you set “Title Stop” to “Off”
in another title. If you go back to the preceding title by pressing
the DOWN q button, the DVD player locates the first chapter of
the title. When "Title Stop" is set to "On", you can access chapters
only within the current title.
To select a title and chapter number at the same time
Press the / buttons to highlight the space next to
“Title”, and enter the title number using the number
buttons.
Note:
Pressing the CLEAR button resets the Title and Chapter numbers.
To clear the Title, Chapter display, press the SEARCH button several
times.
21
Playing From the Desired
Location
OPEN/
CLOSE
POWER
FR
PLAY
FF
PAUSE/STEP
DOWN
STOP
UP
SLOW
MENU
PLAY
SETUP
ENTER
TITLE
AUDIO
RETURN
ANGLE
SUBTITLE
SUBTITLE
ON/OFF
RANDOM
1
2
3
4
5
6
7
8
9
MEMORY
ZOOM
CLEAR
A-B
REPEAT
Number buttons
SEARCH
+10
0
DISPLAY
DIMMER
SEARCH
REMOTE CONTROLLER
You can locate a specific location by entering its
corresponding time (hours, minutes, seconds).
DVD
VCD
CD
Entering the time of the desired location
1
SEARCH
Press SEARCH twice.
You may have to press further depending
on the disc. Press the button repeatedly
until the following
indication appears.
Time -:--:--
2
1
2
3
4
5
6
7
8
9
+10
0
Press the number buttons to enter
the time.
e.g.
1
2
5
3
0
Time 1:25:30
3
PLAY
Press PLAY.
Playback starts from the desired location.
Notes:
• Some discs may not respond to this process.
• Some scenes may not be located precisely as you specified.
• This method for accessing specific locations is available only within
the current title of the DVD video or within the current track of the
VIDEO CD/audio CD.
22
RC-407DV
Playing Repeatedly
OPEN/
CLOSE
POWER
FR
PLAY
FF
PAUSE/STEP
DOWN
STOP
UP
SLOW
MENU
PLAY
SETUP
ENTER
TITLE
AUDIO
RETURN
ANGLE
SUBTITLE
SUBTITLE
ON/OFF
RANDOM
1
2
3
4
5
6
7
8
9
MEMORY
ZOOM
CLEAR
A-B
REPEAT
CLEAR
REPEAT
SEARCH
+10
0
DISPLAY
A-B
DIMMER
REMOTE CONTROLLER
RC-407DV
You can play back a specific title, chapter, track, or segment repeatedly.
(Title repeat, chapter/track repeat, A-B repeat)
DVD
VCD
Repeating a title, chapter, or track
1
2
Select the title, chapter, or track
you want to repeat.
20 , 21
REPEAT
DVD
CD
VCD
CD
Repeating a specific segment
1
A-B
Press REPEAT.
Press A-B at the beginning of the
segment (point A) you want to play
repeatedly.
A–
Each time you press the REPEAT button,
the repeat mode changes as follows.
• DVD video
Repeats the
same chapter.
Title Repeat
Repeats the
same title.
Repeat Off
Resumes normal
playback.
2
A-B
Press A-B again at the end of the
segment (point B).
A–B
The DVD player automatically returns to
point A and starts repeat playback of the
selected segment (A-B).
• VIDEO CD / Audio CD
Track Repeat
All Repeat
Repeat Off
Repeats the
same track.
Repeats the
entire disc.
Resumes normal
playback.
Advanced Playback
Chapter Repeat
To resume normal playback
CLEAR
Press CLEAR.
To resume normal playback
CLEAR
Press CLEAR.
Notes:
Note:
Some discs may not permit repeat operation.
• Some discs may not permit A-B repeat operation.
• You can specify a segment only within the current title or track.
• You cannot set the A-B repeat function for segment that include
multiple camera angles.
• There may be a slight difference between point A and the location
where playback actually resumes depending on the disc.
23
Playing in a Favorite Order
OPEN/
CLOSE
POWER
FR
PLAY
FF
PAUSE/STEP
DOWN
STOP
UP
SLOW
MENU
3
/
SETUP
/
/
ENTER
TITLE
AUDIO
2
RETURN
ANGLE
SUBTITLE
SUBTITLE
ON/OFF
RANDOM
TITLE : 2
CHAPTER : 25
TITLE : 2
CHAPTER : 12
TITLE : 1
CHAPTER : 1
1
2
4
5
6
7
8
9
+10
0
MEMORY
1
3
ZOOM
CLEAR
A-B
REPEAT
CLEAR
SEARCH
DISPLAY
DIMMER
2
REMOTE CONTROLLER
RC-407DV
You can combine your favorite titles, chapters, or tracks and play them
in any order. You can program up to 28 selections into the memory.
(Memory playback)
DVD
VCD
CD
Setting titles, chapters, or tracks in a favorite order
1
Insert a disc and press MEMORY
during stop.
MEMORY
MEMORY
The following display appears.
1
2
3
4
5
6
7
MEMORY
1
2
3
4
5
6
7
T
––
––
––
––
––
––
––
C
––
––
––
––
––
––
––
8
9
10
11
12
13
14
T
––
––
––
––
––
––
––
C
––
––
––
––
––
––
––
15
16
17
18
19
20
21
T
––
––
––
––
––
––
––
C
––
––
––
––
––
––
––
22
23
24
25
26
27
28
T
––
––
––
––
––
––
––
C
––
––
––
––
––
––
––
1
2
3
4
5
6
7
8
9
+10
0
ENTER
PLAY
3
Select the items in the order you
want by pressing the number
buttons, then ENTER for each item.
Each time you press the
/
button, the
-- indication next to T and C is highlighted in
turn. Highlight where you want to enter, then
press the number buttons.
e.g. To play chapter 25 in title 2, chapter 12 in
title 2, all the chapters in title 1, and
chapter 2 in title 4.
Title number
Chapter number
2
2
5
1
2
ENTER
Memory 2
ENTER
Memory 3
1
4
T
––
––
––
––
––
––
––
C
––
––
––
––
––
––
––
15
16
17
18
19
20
21
T
––
––
––
––
––
––
––
C
––
––
––
––
––
––
––
22
23
24
25
26
27
28
T
––
––
––
––
––
––
––
C
––
––
––
––
––
––
––
Press PLAY while the MEMORY
display appears on the TV screen.
To change the programmed selections
1
2
While the MEMORY display appears on the TV
/
to move the highlighted bar to
screen, press
the item you want to change.
Change the selection following the instructions in step 2.
To cancel the programmed selections
1
2
While the MEMORY display appears on the TV
/
to move the highlighted bar to
screen, press
the item you want to cancel.
Press CLEAR.
To resume normal playback from memory
playback
CLEAR
ENTER
Memory 4
8
9
10
11
12
13
14
The DVD player starts memory playback.
ENTER
Memory 1
C
02
12
––
02
––
––
––
To select another chapter in the same
title, you do not need to select the title
number.
T: Title number
C: Chapter number
2
T
02
02
01
04
––
––
––
Press CLEAR.
The MEMORY indicator disappears.
2
To select tracks from a VIDEO CD/audio CD
in order, press the number buttons for the
track, then press the ENTER button for each
selection you want.
To program during playback
If you press the MEMORY button during playback, a
display appears to accept your programming.
If you further press the DISPLAY button, you can display
the MEMORY display also. Follow step 2 and 3.
Notes:
•
•
•
•
•
24
Some discs may not permit memory playback operation.
If you press the REPEAT button during memory playback, the DVD player repeats the current memory playback.
You cannot select title, chapter, and track numbers not included on the disc.
If you press the MEMORY or RETURN button while the MEMORY display appears on the TV screen, the MEMORY display disappears.
The programmed selections will be cleared when you turn off the DVD player.
Playing in Random Order
OPEN/
CLOSE
POWER
FR
PLAY
FF
PAUSE/STEP
DOWN
STOP
UP
SLOW
MENU
PLAY
UP
SETUP
ENTER
TITLE
AUDIO
RETURN
ANGLE
SUBTITLE
SUBTITLE
ON/OFF
TITLE : 1
CHAPTER : 3
TITLE : 2
CHAPTER : 2
TITLE : 3
CHAPTER : 1
1
2
3
4
5
6
7
8
+10
0
RANDOM
MEMORY
ZOOM
CLEAR
A-B
REPEAT
9
Number buttons
RANDOM
CLEAR
SEARCH
DISPLAY
DIMMER
SEARCH
REMOTE CONTROLLER
RC-407DV
You can play back titles, chapters within a title, or tracks in random order.
(Random playback)
DVD
DVD
VCD
Playing titles in random order
Playing chapters or tracks in random order
1
1
RANDOM
Press RANDOM twice during stop.
T i t l e Ran dom
1
2
3
4
5
6
7
8
+10
0
CD
Press the appropriate number
buttons for the title which contains
the chapters you want to play in
random order.
9
SEARCH
Skip this step if you are using VIDEO CD/
audio CD.
e.g. To play the chapters in title 2 in
random order
(DVD video disc)
If you press the RANDOM button during
playback, the DVD player automatically
starts random playback after finishing the
current title.
SEARCH
2
Press RANDOM during stop.
RANDOM
(DVD video)
Cha p t e r Ra nd om
2
Ti t le: 2
Cha p t e r : 1
PLAY
1
(VIDEO CD/audio CD)
T r a c k Ra nd om
Tr ack : 1
Press PLAY.
If you press the RANDOM button during
playback, the DVD player automatically
starts random playback after finishing the
current chapter or track.
The DVD player starts random playback.
Press the PLAY button within about 5
seconds after you press the RANDOM
button.
3
PLAY
Press PLAY.
Advanced Playback
2
Ti t l e: 2
Ch a p t e r :
The DVD player starts random playback.
Press the PLAY button within about 5
seconds after you press the RANDOM
button
To resume normal playback
CLEAR
To resume normal playback
CLEAR
Press CLEAR.
Press CLEAR.
Notes:
• Some discs may not permit random playback operation.
• You cannot use the random playback function in conjunction with
the memory playback function.
Notes:
• Some discs may not permit random playback operation.
• You cannot use the random playback function in conjunction with
the memory playback function.
• If you press the UP
button during random playback, the
DVD player goes to another chapter or track and starts random
playback.
25
Zooming a Picture
OPEN/
CLOSE
POWER
FR
PLAY
FF
PAUSE/STEP
DOWN
STOP
UP
SLOW
MENU
SETUP
/
/
/
ENTER
TITLE
AUDIO
RETURN
ANGLE
RETURN
SUBTITLE
SUBTITLE
ON/OFF
RANDOM
1
2
4
5
6
7
8
9
+10
0
MEMORY
3
ZOOM
CLEAR
A-B
REPEAT
CLEAR
ZOOM
SEARCH
DISPLAY
DIMMER
REMOTE CONTROLLER
RC-407DV
You can magnify areas within a picture.
DVD
Zooming a picture
ZOOM
Press ZOOM during normal, slow
or still playback.
If you further press the ZOOM button
repeatedly, the magnification level increases.
Zoom 1
↓
Zoom 2
↓
Zoom 3
RETURN
To reduce the magnification level, press
the RETURN button.
ENTER
CLEAR
buttons, the
If you press the / / /
zoom point shifts.
When the zoom point reaches an edge of
the picture, the color of “Zoom” changes.
Pressing the CLEAR button restores the
zoom point to the center of the picture.
To resume normal playback
ZOOM
Press ZOOM repeatedly so that "Zoom"
disappears.
Notes:
•
•
•
•
Some discs may not respond to zoom feature.
During some scenes, the buttons may not work as described above.
Zooming does not work on subtitles or menus included on DVD videos.
During zoom playback, the / / /
buttons cannot work on menus included on the DVD video. If you want to view the menus, cancel the
zoom playback.
• The magnification level varies depending on the picture size you select.
26
OPEN/
CLOSE
POWER
Selecting the Camera Angle
FR
PLAY
FF
PAUSE/STEP
DOWN
STOP
UP
SLOW
MENU
SETUP
2
ENTER
TITLE
RETURN
AUDIO
ANGLE
SUBTITLE
1
2
3
4
5
6
7
8
9
+10
0
SUBTITLE
ON/OFF
RANDOM
ANGLE : 1
ANGLE : 2
ANGLE : 3
MEMORY
ZOOM
CLEAR
A-B
REPEAT
1, 2
CLEAR
SEARCH
DISPLAY
DIMMER
REMOTE CONTROLLER
RC-407DV
If the scene was recorded from multiple angles, you can easily change
the camera angle of the scene you are watching.
DVD
Changing the camera angle
1
ANGLE
Press ANGLE while playing a scene
recorded with multiple angles.
While playing a scene recorded with
multiple angles, the angle icon ( )
appears in the DVD display
and on the TV screen.
Press the ANGLE button while the angle
icon is displayed.
Angle: 1
Angle icon
To turn off the angle number display
CLEAR
Press CLEAR.
To disable the angle icon display on the TV
From the on-screen displays, set “On-Screen Displays” to
“Off”.
Monitor the DVD display when you want to change the camera
angle.
2
ANGLE
Press ANGLE or
while the angle
number is displayed on the TV
screen.
Each time you press the ANGLE or
button, the camera angle changes.
ENTER
Angle: 1
Advanced Playback
Current angle
number
Angle: 2
Angle: 3
: Cycles backwards
You can change the camera angle directly
by pressing the number buttons
corresponding to its angle number instead
of using the
/ buttons.
Notes:
• You can change the camera angle during still playback. The camera angle changes to the new setting when you resume normal playback.
• If you pause a picture immediately after changing the camera angle, the resumed playback picture may not display the new camera angle.
27
Selecting a Language
OPEN/
CLOSE
POWER
FR
PLAY
FF
PAUSE/STEP
DOWN
STOP
UP
SLOW
MENU
SETUP
2
ENTER
TITLE
RETURN
AUDIO
ANGLE
SUBTITLE
1
2
3
4
5
6
SUBTITLE
ON/OFF
RANDOM
Good morning!
Bon jour!
¡Buenos días!
7
8
MEMORY
ZOOM
CLEAR
A-B
REPEAT
1, 2
CLEAR
9
SEARCH
+10
0
DISPLAY
DIMMER
REMOTE CONTROLLER
RC-407DV
You can select a preferred language and sound recording system
from those included on the DVD video.
DVD
Selecting a playback audio setting
1
AUDIO
About recording systems
Press AUDIO during playback.
This DVD player uses the Dolby Digital, DTS, MPEG2,
and PCM recording systems and cannot play DVD videos
recorded in any other recording system.
The current audio setting is displayed for
about 3 seconds.
Position number
Language
Recording system
Audio channel
Dolby Digital 5.1 Channel may be displayed as “ j
6CH.”
Audio 1 ENG PCM 2CH
Audio Out Select:Bilstrean
Output sound format
Selecting sound channels of VIDEO CDs
The abbreviation of the language appears
instead of the language name. Refer to the
list of languages and their abbreviations.
2
AUDIO
Press AUDIO or
while the audio
setting is displayed on the TV screen.
During playback, press AUDIO repeatedly to select
the sound cannel.
Each time you press the AUDIO or
button, the audio settings included on the
DVD video change.
e.g.
Audio
→
L. R
AUDIO
1 ENG PCM 2CH
→
ENTER
A VIDEO CD may have left and right sound channels and
contain sounds or languages on each. You can switch
these two channels to hear a preferred sound or
language.
L
2 FRE
→
Audio
6CH
R
Audio
3 SPA PCM 2CH
Notes:
Both the left and right
channel are heard.
The left channel is heard.
The right channel is
heard.
• Some discs allow you to change audio selections only via the disc
menu. If this is the case, press the MENU button and choose the
appropriate language from the selections on the disc menu.
• When you turn on the DVD player or replace a disc, DVD player
returns to the initial default setting.
When you select a sound track which is not Included on the disc,
the DVD player plays a prior sound track programmed on the disc.
: Cycles backwards
To turn off the audio setting display
CLEAR
Press CLEAR.
Output sound conversion table (sampling frequency/quantization bit)
Audio selection from the menu
Discs
Recording system
Dolby Digital
48 kHz/16 bit
48 kHz/20 bit
Linear
DVD video
48 kHz/24 bit
PCM
discs
96 kHz/16 bit
96 kHz/20bit
96 kHz/24 bit
DTS
MPEG2
Audio CDs Linear PCM 44.1 kHz/16 bit
28
DTS
"Bitstream "
ANALOG
DIGITAL OUTPUT
OUT jacks
jack
48 kHz/20 bit
Bitstream
48 kHz/16 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/16 bit
–
Bitstream
–
Bitstream (7.1ch)
44.1 kHz/16 bit 44.1 kHz/16 bit
(Noise)
Bitstream
and output jacks on the rear panel
"Analog 2ch"
ANALOG
DIGITAL OUTPUT
OUT jacks
jack
48 kHz/20 bit
Bitstream
48 kHz/16 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/16 bit
48 kHz/24 bit
–
96 kHz/16 bit
–
96 kHz/20 bit
–
96 kHz/24 bit
–
–
Bitstream
Bitstream (2ch) 44.1 kHz/16 bit
44.1 kHz/16 bit 44.1 kHz/16 bit
Bitstream
(Noise)
"PCM"
ANALOG
DIGITAL OUTPUT
OUT jacks
jack
48 kHz/20 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/16 bit
–
–
44.1 kHz/16 bit 44.1 kHz/16 bit
44.1 kHz/16 bit 44.1 kHz/16 bit
(Noise)
Bitstream
Selecting Subtitles
OPEN/
CLOSE
POWER
FR
PLAY
FF
PAUSE/STEP
DOWN
STOP
UP
SLOW
MENU
SETUP
/
ENTER
TITLE
AUDIO
RETURN
ANGLE
SUBTITLE
SUBTITLE
ON/OFF
RANDOM
1
2
3
4
5
6
7
8
9
+10
0
MEMORY
ZOOM
CLEAR
A-B
REPEAT
SUBTITLE
ON/OFF
SUBTITLE
CLEAR
SEARCH
DISPLAY
DIMMER
Good evening!
Bon soir!
¡Buenas tardes!
REMOTE CONTROLLER
RC-407DV
You can display subtitles on the TV screen and select a subtitle language
from those included on the DVD video.
DVD
Selecting a subtitle language
1
DVD
To Turn subtitles on or off
Press SUBTITLE during playback.
SUBTITLE
The current subtitle setting is displayed for
about 3 seconds.
SUBTITLE
ON/OFF
Press SUBTITLE ON/OFF during
playback.
Subtitle:
1 ENG On
Subtitle: 1 ENG On
Appears for
about 3 seconds
Language
Position number
The abbreviation of the language appears
instead of the language name. Refer to
the list of languages and their
abbreviations.
SUBTITLE
ENTER
Subtitles
Press SUBTITLE or
while the
subtitle setting is displayed on the
TV screen.
Each time you press the SUBTITLE or
button, the subtitle languages included on
the DVD video change.
e.g.
To turn off the subtitles
SUBTITLE
ON/OFF
Press SUBTITLE ON/OFF.
The subtitles disappear.
Subtitle : 1 ENG On
Subtitle:
1 ENG Of f
Appears for
about 3 seconds
Subtitle : 2 FRE On
Advanced Playback
2
Good morning!
Subtitle : 3 SPA On
: Cycles backwards
To turn off the subtitle setting display
CLEAR
Press CLEAR.
Notes:
• Some DVD videos are set to display subtitles automatically, and
you cannot turn them off even if you set the subtitle function to off.
• During some scenes, the subtitles may not appear immediately
after you select “On.”
• Some DVD videos will allow you to make subtitle selections and
turn subtitles on or off only via the disc menu.
Notes:
• When you turn on the DVD player or replace a disc, DVD player
returns to the initial default setting.
When you select a subtitle language which is not included on the
disc, the DVD player plays a prior language programmed on the disc.
• During some scenes, the subtitles may not appear immediately
after you change the subtitle language by pressing the
/
buttons.
29
Viewing the Operational
Information
OPEN/
CLOSE
POWER
FR
PLAY
FF
PAUSE/STEP
DOWN
STOP
UP
SLOW
MENU
SETUP
ENTER
TITLE
AUDIO
RETURN
ANGLE
SUBTITLE
SUBTITLE
ON/OFF
RANDOM
1
2
3
4
5
6
7
8
9
+10
0
MEMORY
ZOOM
CLEAR
A-B
REPEAT
SEARCH
DISPLAY
DISPLAY
DIMMER
REMOTE CONTROLLER
RC-407DV
You can view information about a disc and its operational status
on the TV screen.
DVD
VCD
CD
DVD
Press DISPLAY during stop.
Press DISPLAY during playback.
Each time you press the DISPLAY button, the
on-screen display changes as follows.
Current title number
Current chapter number
e.g.
2
Chapter :
Stop
Operational
status
1
↓
Turns off.
VIDEO CD/Audio CD
e.g.
→
Track : 1
↓
Turns off.
DISPLAY
Each time you press the DISPLAY button, the
on-screen display changes as follows.
DVD video
DVD video
→ Title :
CD
Checking the remaining time and setting status
Checking the operational status
DISPLAY
VCD
Current track number
Stop
Total 0:46:30
Current title number
Current chapter number
Operational status
Playback mode
Elapsed time and
e.g.
remaining time of
the current title
Play
Elapsed time and
Elapsed Remain
remaining time of
Title : 3 0:10:15 0:50:45
the current
Chapter : 2 0:03:08 0:10:24
Chapter Repeat
chapter
→
Audio : 1 ENG j 2CH
Subtitle : 12 ENG Off
Angle : 1
Operational
status
Total playing
time of the
disc
Current audio setting
Current subtitle setting
Current angle setting
The abbreviation of the language (e.g. ENG)
appears instead of the language name. Refer to the
list of languages and their abbreviations.
↓
Bit Rate : 0
10 6.0 Mbps
Data transfer rate (Mbit/s)
= Amount of picture, sound and subtitle data
in the DVD video transferred per second.
The larger the value is, the more data
processed, but this does not necessarily
insure better picture quality.
↓
Turns off.
VIDEO CD/Audio CD
Current track number
Playback mode
e.g.
→
Operational status
Elapsed time and
remaining time of
Play
the current track
Elapsed Remain
Track : 3 0:01:20 0:02:00
Elapsed time and
0:05:12 0:43:00
Disc
remaining time of
Track Repeat
the disc
↓
Turns off.
30
Customizing the Function Settings
OPEN/
CLOSE
POWER
FR
PLAY
FF
PAUSE/STEP
DOWN
STOP
UP
SLOW
MENU
SETUP
ENTER
TITLE
RETURN
AUDIO
ANGLE
SUBTITLE
1
2
3
4
5
6
7
8
9
+10
0
SUBTITLE
ON/OFF
RANDOM
MEMORY
ZOOM
CLEAR
A-B
REPEAT
2
1
2
SEARCH
DISPLAY
DIMMER
REMOTE CONTROLLER
RC-407DV
You can change the default settings to customize performance to your
preference.
Setting procedure
SETUP
Press SET UP during stop.
3
The following on-screen display appears.
LANGUAGE
On-Screen Language
Disc Menu Language
Audio Language
Subtitle Language
2
ENTER
ENTER
ENG
ENG
ENG
---
Press / to select a symbol for
the setting you want to change
Press y/ uto select the setting you
want to change, then press ENTER.
ENTER
4
ENTER
Change the selection by y/ uor
other buttons, referring to the
pages from 37, then press ENTER.
(See the next page.)
ENTER
Setting on languages
Settings on playback picture
conditions
5
Repeating steps 3 and 4 to change
other settings.
To select another symbol, go back to step 2.
6
Press SETUP
SETUP
Setting on sound output
Setting on displays
The on-screen displays disappears.
To return to the previous display
press RETURN
Function Setup
1
RETURN
Setting on operational options
Notes:
• The on-screen display disappears when you press the SETUP
button.
• The SETUP button can function even during normal playback,
however some operations may be inaccessible, and a message will
appear. In this case, try again after playing is stopped.
31
Customizing the Function Settings (continued)
Setting details
Setting
Details
Page
On-screen language
DVD
To select a preferred language for on-screen displays.
33
Disc menu language
DVD
To select a preferred language for disc menus.
33
Audio language
DVD
To select a preferred language for the sound track.
33
Subtitle language
DVD
To select preferred language for subtitles.
34
TV shape
DVD
Black level
DVD
VCD
Audio out select
DVD
VCD
Dynamic range control
DVD
To turn on or off a function that makes faint sound easier to hear
even if you lower the volume during late hours playback.
36
Karaoke vocal
DVD
To turn on or off the vocal output during KARAOKE disc playback. 36
Extended audio features
DVD
To turn on or off special language for visually impaired
persons.
36
To turn on or off the operational status display (On-screen
display) on the TV screen.
37
To select the background color for on-screen displays.
37
VCD
CD
To select a picture size according to the aspect ratio of your TV. 35
CD
To select the black level of playback pictures.
35
To select an output sound format corresponding to your
system connection.
36
On-screen displays
DVD
VCD
CD
OSD background color
DVD
VCD
CD
Extended subtitle features
DVD
To turn on or off special subtitles for hearing Impaired persons. 37
Screen saver
DVD
To turn on or off the screen saver.
37
Pause/still
DVD
To select the resolution of still pictures.(Field/Frame)
38
Parental lock
DVD
To turn on or off the parental lock function.
38
Title Stop
DVD
To turn on or off a feature that automatically stops playback
after a title has been viewed.
38
PBC
VCD
To use the menu screen when playing a PBC-controllable VIDEO CD. 38
(Continued)
32
Setting details
Notes:
LANGUAGE
On-Screen Language
Disc Menu Language
Audio Language
Subtitle Language
DVD
VCD
• Some DVD video may not include your preselected language. In this case, the DVD
player automatically displays disc menus
consistent with the disc’s initial language
setting.
English
French
Spanish
CD
Audio language
DVD
English : To view on-screen displays in English.
French : To view on-screen displays in French.
Spanish : To view on-screen displays in Spanish.
Disc menu language
LANGUAGE
On-Screen Language
Disc Menu Language
Audio Language
Subtitle Language
DVD
English : To display disc menus in English.
French : To display disc menus in French.
Spanish : To display disc menus in Spanish.
Others : To make a further choice.
After pressing the ENTER button, follow
steps 1) - 4) below.
LANGUAGE
On-Screen Language
Disc Menu Language
Audio Language
Subtitle Language
ENG
ENG
ENG
---
English
French
Spanish
Others
1) Obtain the abbreviation of the
.
preferred language from the list
2) Select the first character by pressing the /
bottons.
buttons to shift
3) Press the /
and select the second character by pressing
the /
buttons.
4) Press the ENTER button.
English
French
Spanish
Others
ENG
ENG
ENG
---
English
French
Spanish
Others
: To play sound tracks in English.
: To play sound tracks in French.
: To play sound tracks in Spanish.
: To make a further choice.
After pressing the ENTER
button, follow steps 1) - 4) below.
1) Obtain the abbreviation of the preferred
language from the list
.
2) Select the first character by pressing the /
buttons.
buttons to shift and select the
3) Press the /
second character by pressing the /
buttons.
4) Press the ENTER button.
LANGUAGE
On-Screen Language
Disc Menu Language
Audio Language
Subtitle Language
ENG
ENG
PA
---
English
French
Spanish
Others
Code
LANGUAGE
On-Screen Language
Disc Menu Language
Audio Language
Subtitle Language
ENG
PA
ENG
---
English
French
Spanish
Others
Code
P A
Function Setup
3
On-screen language
ENG
ENG
ENG
---
Noe
ts:
P A
• Some DVD videos may be played in a different
language than you selected. A prior language
may be programmed on the disc.
(Continued)
33
Customizing the Function Settings (continued)
Setting details
Subtitle language
DVD
LANGUAGE
On-Screen Language
Disc Menu Language
Audio Language
Subtitle Language
English
French
Spanish
Others
ENG
ENG
ENG
---
English
French
Spanish
No Subtitles
Others
: To display subtitles in English.
: To display subtitles in French.
: To display subtitles in Spanish.
: To make a further choice.
After pressing the ENTER button,
follow steps 1) - 4)below.
1) Obtain the abbreviation of the preferred
.
language from the list
2) Select the first character by pressing the /
buttons.
buttons to shift and select the
3) Press the /
second character by pressing the / buttons.
4) Press the ENTER button.
LANGUAGE
On-Screen Language
Disc Menu Language
Audio Language
Subtitle Language
ENG
ENG
ENG
PA
English
French
Spanish
No Subtitles
Others
Code
P A
Notes:
• Some DVD videos may be set to display
subtitles in a different language than you
selected. A prior subtitle language may be
programmed on the disc.
• Some DVD videos allow you to change subtitle
selections only via the disc menu. If this is the
case, press the MENU button and choose the
appropriate subtitle language from the selection
on the disc menu.
34
Black level
PICTURE
TV Shape 4:3LB
Black Level Nrml
DVD
VCD
4:3 LetterBox
4:3 Normal
16:9Widescreen
PICTURE
TV Shape 4:3LB
Black Level Nrml
TV Shape
4:3 LetterBox:
4:3 Normal:
Enhanced
Normal
DVD
Select when a 4:3 TV is
connected. Displays
theatrical images with masking
bars above and below the
picture.
Set to your preference and monitor's ability.
Select the brightness of playback pictures.
Enhanced:
Normal:
Expanded black level. (0 IRE)
Standard black level. (7.5 IRE)
Select when a 4:3 TV is
connected. Displays
pictures cropped to fill your TV
screen. Either
or both sides of the picture are
cut off.
16:9 Widescreen: Select when a 16:9 wide TV is
connected.
• The displayable picture size is preset on the
DVD video. Therefore, the playback picture of
some DVD videos may not conform to the
picture size you select.
• When you play DVD videos recorded in the 4:3
picture size only, the playback picture always
appears in the 4:3 picture size regardless of the
TV shape setting.
• If you select “16:9 Widescreen” and you own a
4:3 TV set, the DVD playback picture will be
horizontally distorted during playback. Images
will appear to be horizontally compressed.
Always be sure that your TV shape conforms to
the actual TV in use.
Function Setup
Notes:
35
Customizing the Function Settings (continued)
Setting details
Notes:
AUDIO
Audio Out Select
Dynamic Range Control
Karaoke Vocal
Extended Audio Feature
Bitstream
On
Off
Off
Bitstream
Analog 2ch
PCM
• This function works only on playback of Dolby
Digital recorded discs.
• The level of Dynamic Range Reduction may
differ depending on the DVD video.
Karaoke vocal
Audio Out Select
DVD
VCD
CD
Select the output sound format corresponding to
your system connection.
.
For details of sound recording systems, see
Bitstream: Select when connected to an amplifer
equipped with a Dolby Digital, DTS,
MPEG1 or MPEG2 decoder.
The DVD player outputs digital audio
information in the bitstream format
when you play a DVD video recorded
on the Dolby Digital, DTS, MPEG1 or
MPEG2 recording system.
Analog 2ch: Select when connected to a TV, or
Dolyby Pro Logic or stereo system via
the analog audio jacks.
PCM:
DVD
Select whan connected to a 2 channel
digital stereo amplifier.
The DVD player outputs sounds in the
PCM 2ch format when you play a DVD
video recorded on the Dolby Digital,
MPEG1 or MPEG2 recording system.
AUDIO
Audio Out Select
Dynamic Range Control
Karaoke Vocal
Extended Audio Feature
Notes:
The vocal output feature is used during playback
of Dolby Digital (multi-channel) recorded DVD
KARAOKE discs. This feature allows you to turn
off vocal audio tracks, or restore them for
background accompaniment.
When playing KARAOKE, connect appropriate
audio equipment as an amplifier to the DVD player.
DVD
DVD
AUDIO
Audio Out Select
Dynamic Range Control
Karaoke Vocal
Extended Audio Feature
AUDIO
Audio Out Select
Dynamic Range Control
Karaoke Vocal
Extended Audio Feature
Bitstream
On
Off
Off
On: Dynamic range is reduced.
Off: Full dynamic range is maintained.
36
Off
On
On: The primary vocal is output when it is
recorded on the disc.
Off: The primary vocal is not output.
Extended audio features
Dynamic range control
Bitstream
On
Off
Off
Bitstream
On
Off
Off
Off
On
Off
On
Some DVD videos contain special language track
that describes the actions on-screen for visually
impaired persons. The DVD player automatically
plays this special feature.
On: This function works.
Off: This function does not work.
Screen Saver
DISPLAY
On-Screen Displays
OSD Background Color
Extended Subtitle Features
Screen Saver
On
Gray
Off
On
DVD
Off
On
DISPLAY
On-Screen Displays
OSD Background Color
Extended Subtitle Features
Screen Saver
DVD
ON-Screen Display
VCD
DVD
) are not
) are
VCD
DISPLAY
On-Screen Displays
OSD Background Color
Extended Subtitle Features
Screen Saver
Off
On
CD
Off: Operational modes (e.g. “PLAY”,
displayed.
On: Operational modes (e.g. “PLAY”,
displayed on-screen.
OSD Background Color
On
Gray
Off
On
On
Gray
Off
On
Off: The screen saver does not work.
On: The screen saver works.
CD
Blue
Gray
Blue: Blue background.
Gray: Gray background.
DVD
DISPLAY
On-Screen Displays
OSD Background Color
Extended Subtitle Features
Screen Saver
On
Gray
Off
On
Off
On
Some DVD videos contain special subtitles, an
enhancement of closed captioning for hearing
impaired persons. The DVD player automatically
displays these special subtitles.
Function Setup
Extended Subtitle Features
Off: This function does not work.
On: This function works.
37
Customizing the Function Settings (continued)
Setting details
OPERATION
Pause/Still
Parental Lock
Title Stop
PBC
After you select OPERATION
your preference.
Pause / Still
Auto
Off
Off
On
Auto
Frame
OPERATION
Pause/Still
Parental Lock
Title Stop
PBC
Auto
Off
Off
On
1) Press the number buttons to create a personal
4-digit security code, then press ENTER.
DVD
For normal use. Image can be paused
without shaking.
Frame: The resolution of still pictures is improved,
so that you can make a motionless picture
more clearer when you pause it.
If you make a mistake before pressing the
ENTER button, press the CLEAR button and
enter your 4-digit security code again.
Viewable
DVD
Parental Lock
DVD videos equipped with the parental lock
function are rated according to their content. The
contents allowed by a parental lock level and the
way a DVD video can be controlled may vary from
disc to disc. For example, if the disc allowed you
could edit out violent scenes unsuitable for children
and replace them with more suitable scenes, or
lock out playback of the disc altogether.
• DVD videos may or may not respond to the
parental lock settings. This Is not a defect in the
DVD player. Make sure this function works with
your DVD videos.
OPERATION
Pause/Still
Parental Lock
Title Stop
PBC
Auto
Off
Off
On
Off
On
On: To activate the parental lock
feature or change the settings.
After pressing the ENTER button, follow steps
1) - 3) below.
Off: The parental lock feature does not function.
After pressing the ENTER button, follow steps
1) below.
38
Security Code
, adjust to
Auto:
Parental Lock
Off
On
Level8
Level7
Level6
Level5
Level4
Level3
Level2
Level1
2) Press the
/
buttons to select the country
whose standards were used to rate the DVD
video, then press the ENTER button.
Title Stop
Locked
Viewable
Level8
Level7
Level6
Level5
Level4
Level3
Level2
Level1
DVD
OPERATION
Pause/Still
Parental Lock
Title Stop
PBC
Auto
Off
Off
On
Off
On
3) Press the /
buttons to select the parental
lock level, then press the ENTER button.
You cannot play DVD videos rated higher than
the level you selected unless you cancel the
parental lock function. For example, when you
select level 7, discs rated higher than level 7
are locked out and cannot be played.
The parental lock level is equivalent to the
following USA movie ratings.
To change your 4-digit security code:
(1) After selecting “On” or “Off”
, press the
STOP button for times, then press the
ENTER button.
STOP
STOP
OPERATION
Pause/Still
Parental Lock
Title Stop
PBC
Auto
Off
Off
On
Off
On
On: To view the menu screen when playing a
PBC-featured VIDEO CD.
Off: For playing without using the menu screen.
To change the parental lock level:
Follow steps 1) - 3).
STOP
VCD
LEVEL 3: PG
LEVEL 1: G
The parental lock levels for “CANADA” are
included for future use. Check the appropriate
parental lock level when you buy a DVD video
equipped with the parental lock feature in the
future.
STOP
PBC
* PBC is the abbreviation of Playback Control.
ENTER
The 4-digit security code is cleared.
(2) Press the number buttons to create a new
4-digit security code.
(3) Press the ENTER button.
Function Setup
LEVEL 7: NC-17
LEVEL 6: R
LEVEL 4: PG 13
On: The DVD player stops after playback of a
title is completed.
Off: The DVD player continues after playback of
a title is completed.
39
Table of Languages
Table of languages and their abbreviations
Abbreviation Language
of the
Language
–––
CHI (ZH)
DUT (NL)
ENG (EN)
FRE (FR)
GER (DE)
ITA (IT)
JPN (JA)
KOR (KO)
MAY (MS)
SPA (ES)
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EL
40
No alternate
language
Chinese
Dutch
English
French
German
Italian
Japanese
Korean
Malay
Spanish
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Belorussian
Bulgarian
Bihari
Bislama
Bengali,Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
Bhutani
Greek
Abbreviation Language
of the
Language
EO
ET
EU
FA
FI
FJ
FO
FY
GA
GD
GL
GN
GU
HA
HI
HR
HU
HY
IA
IE
IK
IN
IS
IW
JI
JW
KA
KK
KL
KM
KN
KS
KU
KY
LA
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Irish
Scottish Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Kashmiri
Kurdish
Kirghiz
Latin
Abbreviation Language
of the
Language
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MT
MY
NA
NE
NO
OC
OM
OR
PA
PL
PS
PT
QU
RM
RN
RO
RU
RW
SA
SD
SG
SH
SI
SK
Lingala
Laotian
Lithuanian
Latvian,Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Maltese
Burmese
Nauru
Nepali
Norwegian
Occitan
(Afan) Oromo
Oriya
Panjabi
Polish
Pashto,Pushto
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Rumanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sango
Serbo-Croatian
Singhalese
Slovak
Abbreviation Language
of the
Language
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Zulu
Notes on Discs
This section shows you how to handle, clean, and store discs.
Playable discs
On handling discs
• Do not touch the playback side of the disc.
Playback side
• Do not attach paper or tape to discs.
This DVD player can play back the following discs.
Maximum
Disc mark Contents Disc
playback time
size
Approx. 4 hours
12 cm (single sided disc)
Audio
Approx. 8 hours
DVD
(double sided disc)
+
video
Video
Approx. 80 minutes
(single sided disc)
(moving
8 cm
Approx. 160 minutes
pictures)
(double sided disc)
VIDEO
CDs
Audio +
Video
(moving
pictures)
Audio
CDs
Audio
On cleaning discs
• Fingerprints and dust on the disc cause picture and sound
deterioration. Wipe the disc from the center outwards with a
soft cloth. Always keep the disc clean.
12 cm
Approx. 74 minutes
8 cm
Approx. 20 minutes
12 cm
Approx. 74 minutes
8 cm (CD Approx. 20 minutes
single)
You cannot play back discs other than those listed above.
Do not use discs that are not audio discs (eg. CD-ROMS for use with
personal computers), as these could damage the speakers and
amplifior.
This DVD player uses the PAL/NTSC color system, and cannot play back
DVD video recorded in any other color system (SECAM, etc.).
On storing discs
• Do not store discs in a place subject to direct sunlight or
near heat sources.
• Do not store discs in places subject to moisture and dust
such as a bathroom or near a humidifier.
• Store discs vertically in a case. Stacking or placing objects
on discs outside of their case may cause warping.
About this instruction manual
This instruction manual explains the basic instructions of this
DVD player. Some DVD video are produced in a manner that
allows specific or limited operation during playback, As such,
the DVD player may not respond to all operating commands.
Refer to instruction notes of discs.
” may appear on the TV screen during operation. A “
”
“
means that the operation is not permitted by the DVD player
or the disc.
Notes on region numbers
The region number of this DVD player is 1. If region numbers,
which stand for their playable area, are printed on your DVD
player and you do not find 1 or
, disc playback will not
be allowed by the player. (In this case, the DVD player
displays the message.)
Avoid using heart-shaped or octagonal discs. Playing irregularly shaped
discs may damage the internal mechanism of the DVD player.
Do not use discs on which adhesive from adhesive tape or a disc
label (if it is a rental disc) remains. Otherwise, you may not be able to
eject the discs or the DVD player may become inoperative.
On VIDEO CDs
This DVD player supports the VIDEO CDs equipped with the PBC
(Version 2.0) function. (PBC is the abbreviation of Playback Control.)
You can enjoy two playback variations depending on types of discs.
• VIDEO CD not equipped with PBC function (Version 1.1)
Sound and movie can be played on this DVD player in the same
way as an audio CD.
• VIDEO CD equipped with PBC function (Version 2.0)
In addition to operation of the VIDEO CD not equipped with the
PBC function, you can enjoy playback with interactive software
and with search function by using the menu displayed on the
TV screen (Menu Playback). Some of the functions described in
this owner’s manual may not work with some discs.
Notes on copyright
It is forbidden by law to copy, broadcast, show, broadcast on
cable, play in public, and rent copyrighted material without
permission.
DVD video are copy protected, and any recordings made from
these discs will be distorted.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Others
• If you cannot wipe off the dust with a soft cloth, wipe the disc
lightly with a slightly moistened soft cloth and finish with a
dry cloth.
• Do not use any type of solvent such as thinner, benzine,
commercially available cleaners or antistatic spray for vinyl
LPs. It may damage the disc.
41
Before Calling Service Personnel
Check the following guide for the possible cause of a problem before contacting service.
Symptoms and correction
Page
Symptom
Cause
Correction
No power.
The power plug is disconnected.
Connect the power plug into the wall outlet
securely.
16
No picture.
• The TV is not set to receive DVD signal
output.
• Select the appropriate video input mode on
the TV so the picture from the DVD player
appears on the TV screen.
• Connect the video cable into the jacks
securely.
16
• The video cable is not connected securely.
No sound.
• The equipment connected with the audio
cable is not set to receive DVD signal
output.
• Select the correct input mode of the audio
receiver so you can listen to the sound from
the DVD player.
• The audio cables are not connected
securely.
• Connect the audio cable into the jacks
securely.
12-15
16
12-15
• The power of the equipment connected with • Turn on the equipment connected with the
the audio cable is turned off.
audio cable.
–
• The setting of output sound type is not
correct.
• Set the audio setting correctly.
The playback picture has
occasional distortion.
• The disc is dirty.
• Eject the disc and clean it.
• It is in fast forward or fast reverse playback
• Sometimes a small amount of picture distortion
may appear. This is not a malfunction.
Brightness is unstable or
noises are produced on
playback pictures.
• The copy protection's effect.
• Connect the DVD player directly to the TV.
Avoid connecting the DVD player to a VCR
or TV/VCR combination.
The DVD player does not start
playback.
• No disc is inserted.
• Insert a disc. (Check that the DVD or VIDEO
CD/audio CD indicator in the DVD display is lit.)
9
• An unplayable disc is inserted.
• Insert a playable disc. (Check the disc type
and color system.)
41
• The disc is placed upside down.
• Place the disc with the playback side down.
16
• The disc is not placed within the guide.
• Place the disc on the disc tray correctly
inside the guide.
16
• The disc is dirty.
• Clean the disc.
41
• The parental lock function is set.
• Cancel the parental lock function or change
the parental lock level.
38
Buttons do not work.
Power supply fluctuations or other
abnormalities such as static electricity may
interrupt correct operation.
Turn the power on or off with the POWER
button. Or disconnect the power plug and
insert it into the wall outlet again.
–
The remote controller does not
work properly
• The remote controller is not pointed at the
remote sensor of the DVD player.
• Point the remote controller at the remote
sensor of the DVD player.
11
• The remote controller is too far from the
DVD player.
• Operate the remote controller within about 5 m.
11
• The batteries in the remote controller are
exhausted.
• Replace the batteries with new ones.
11
28, 36
This unit contains a sensitive microcomputer, which under certain circumstances might fail to operate due to excessive noise
interference. In such case, disconnect the AC power from the electrical outlet, wait five seconds and replace.
42
41
–
12
Specifications
DVD player/outputs/supplied accessories
DVD player
Power supply
Power consumption
Weight
External dimensions
Signal system
Laser
Frequency range (digital audio)
Signal-to-noise ratio (digital audio)
Audio dynamic range (digital audio)
Harmonic distortion (digital audio)
Wow and flutter
Operating conditions
AC 120 V, 60 Hz
25 W
3.8 kg, 8.4 lbs.
435 × 91 × 306 mm (W/H/D), 17-1/8" × 3-9/16" × 12 1/16" (W/H/D)
Standard NTSC
Semiconductor laser, wavelength 650 nm
DVD linear sound : 48 kHz sampling 4 Hz to 22 kHz
96 kHz sampling 4 Hz to 44 kHz
Audio CD :
4 Hz to 20 kHz
More than 96 dB (EIAJ)
More than 90 dB (EIAJ)
Less than 0.01 %
Below measurable level (less than ±0.001 % (W.PEAK)) (EIAJ)
Temperature: 5 °C to 35 °C (41 to 95 Degree), Operation status: Horizontal
Outputs
Video output
S video output
Color different output
Audio output (optical audio)
Audio output (digital audio)
Audio output (analog audio)
Headphone terminal
1.0 V (p-p), 75 Ω, negative sync., pin jack × 1
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin × 1
(C) 0.286 V (p-p), 75 Ω
(Y) 1.0 V (p-p), 75 Ω, negative sync., pin jack × 1
(Cb)/(Cr) 0.7 V (p-p), 75 Ω
Optical connector × 1
0.5 V (p-p), 75 Ω, pin jack × 1
2.0 V (rms), 470 Ω, pin jack (L, R) × 1
32 Ω (10mW), Impedance; more than 8 Ω
Supplied accessories
S video cable ....................................................................... 1
Audio·video connection cable .............................................. 1
Remote controller (RC-407DV) ............................................ 1
Batteries (AA) ...................................................................... 2
z cable .............................................................................. 1
Others
• Designs and specifications are subject to change without notice.
43
Sales & Product Planning Div.: 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 0720-31-8111 Fax: 0720-33-5222
ONKYO U.S.A. CORPORATION
200 Williams Drive, Ramesy, N.J. 07446, U.S.A.
Tel: 201-825-7950 Fax: 201-825-8150 E-mail: [email protected]
ONKYO EUROPE ELECTRONICS GmbH
Industriestrasse 20, 82110 Germering, GERMANY
Tel: 089 84 93 20 Fax: 089 84 93 226 E-mail: [email protected]
ONKYO CHINA LIMITED
Units 2102-7, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung,
N.T., HONG KONG Tel: 852 2429 3118 Fax: 852 2428 9039
HOMEPAGE
http://www.onkyo.co.jp/
SN 29342777A
Printed in Japan
D9906-1
E
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement