Specimen Authoring Tool - Manually Adding Sensors in the

Specimen Authoring Tool - Manually Adding Sensors in the
Specimen Authoring Tool - Manually Adding Sensors in the
Specimen Authoring Tool
The Specimen Authoring Tool can automatically load your sensors from a data file.
However, if you don’t have a data file, your data file is not currently in an importable
format, or if your data file does not contain all of your sensors, you may need to manually
add sensors when creating your mapping file (*.ind file).
Sensors can be added via the Sensor > Add Sensor menu option.
The sensor will be added as a user defined sensor. You will need to use the sensor
properties panel to specify the sensor type, units, etc.
1/4
You can also copy and paste existing sensors (one or more sensors can be copied and
pasted at a time). Note that the pasted sensors have the same name as the copied sensor,
which needs to be edited.
2/4
3/4
4/4
Powered by TCPDF (www.tcpdf.org)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement