Philips | MCW770/37 | Instruction manual | Philips MCW770 CD Shelf System

8/23/01
10:45
Page 1
Quick Use Guide
This Quick Use Guide gives a rough
overview and helps to start quickly with
basic steps. Please read the supplied
instruction manual for detailed
information.
MC W770
1 Insert batteries
English
MC-W770 QUG/22.1 eng
Supplied accessories
–
–
–
–
PC link software installer CD-ROM
Wireless USB adapter and extension cable
Remote control and 2 batteries, size AA
2 loudspeaker boxes including
2 speaker cables
– AM/MW loop antenna
– FM wire antenna
– AC power cord
Open the battery compartment of the remote control and insert
2 alkaline batteries, type AA (R06, UM-3).
2 Connect speakers, antennas, an additional appliance (optional)
and the AC power cord
1 Connect the speaker cables to the MC W770.
Use the supplied speakers only. Using other speakers
can damage the set or the sound quality will be
negatively affected.
2 Connect the AM/MW antenna.
3 Connect the FM antenna.
4 If you want to connect an additional appliance, use a cinch
cable to connect the audio inputs of the MC W770 to the
audio outputs of the additional appliance.
5 Check whether the mains voltage as shown on
the type plate corresponds to your local mains
voltage. If it does not, consult your dealer or
service organisation.
Make sure all connections have been made
before switching on the mains supply.
Connect the AC power cord supplied to
AC MAINS ~ and to the wall socket.
1
MC-W770 QUG/22.1 eng
8/23/01
10:45
Page 2
3 Install the tuner
1 When the AC power cord is connected for the first time
2 Press ÉÅ on the set to store all available radio stations
to the wall socket, TUNER and AUTO INSTALL - PRESS
PLAY are displayed.
automatically.
➜ Automatic searching and storing starts. Once completed,
the last tuned radio station will be played.
4 Play your discs on the set
For playback on this set you can use:
– All pre-recorded audio CDs
– All finalised audio CDR and CDRW discs
– MP3-CDs (CD-ROMs with MP3 tracks)
1 Press OPEN/CLOSE / on the set.
2 Press one of the disc keys (DISC 1,
DISC 2, DISC 3, DISC 4, or DISC 5)
on the set to select the desired disc
tray to be opened.
CD
TUNER
AUX
3 Load a disc with the printed side up.
set to close the tray.
CD
TUNER
AUX
CD5
CD4
VOL
CD3
CD2
CD5
CD4
CD3
CD2
PC LINK
PC LINK
CD1
CD1
4 Press OPEN/CLOSE / again on the
VOL
REPEAT PROGRAM SHUFFLE DISPLAY
ALBUM
BROWSE
SLEEP
5 If you want to play one
particular disc:
Press one of the disc keys CD 1,
CD 2, CD 3, CD 4, or CD 5 on the
remote control to start playback of
the desired disc in the selected tray.
2
If you want to play all loaded
discs:
Press CD on the remote control.
Then press É
Å to start playback.
0
CLOCK
TIMER TIMER ON/OFF
To stop playback press STOP Ç.
MC-W770 QUG/22.1 eng
8/23/01
10:45
Page 3
5 Install the wireless connection to your PC
PC system requirements:
– Windows 98SE/ME/2000/XP
– Pentium Class 350MHz processor or higher
– 128MB RAM or higher
– CD-ROM drive
– USB port
– Free hard disk space: 100 MB for the software
Do not connect the wireless USB adapter immediately! You will be asked during
the installation process to connect it.
If you have a Firewall installed on your PC, please switch it off during the
installation.
Please close all internet connections and other programs running on your PC
before starting installation.
1 Place the set as close as possible to the PC.
2 Switch on your PC and insert the installation disc.
Note: Do not use the
installation process.
computer
icon, which will appear on the PC screen during the
3 The installation guide will appear automatically. If it does not, go to the CD-ROM
CD
TUNER
CD1
AUX
PC LINK
CD3
CD2
CD5
CD4
VOL
drive in Windows Explorer and double click on the SETUP_.exe.Then continue
as follows:
– Select your desired language from the list.
– Select Installing Software and then select Quick Installation and click
Install.
– Then follow the installation steps prompted by the screen to install the wireless
USB adapter driver, the Philips Media Manager software and the network setup.
Note: Windows may display a warning that the driver is not approved by
Microsoft (message differs with Windows version). Ignore the message and
continue with the installation.
4 Switch on the set and press PC LINK A.
5 During the network setup you will be asked to go to the install mode: Press and
hold PC LINK A for 5 seconds.
➜PC LINK is displayed and INSTALLING is scrolled.The set searches for a
connection to the PC.
+
When the installation has been finished successfully:
➜PC LINK and COMPLETED are displayed.
supplied wireless
USB adapter
6 Play your music collection from the PC via the set
CD
TUNER
CD1
AUX
PC LINK
CD3
CD2
1 Add your MP3 music folders and files to the Philips Media Manager, during or after
installation of Philips Media Manager. Only those folders and files you can see in the
Philips Media Manager will be accessible from the MC W770.
CD5
CD4
VOL
VOL
ALBUM
BROWSE
2 Make sure your PC is switched on.
3 Press PC LINK A to select the PC as source.
4 As soon as the connection is established:
➜
PC LINK is displayed and a track name is scrolled.
5 Press É
Å to start playback.
➜
➜
PC LINK is displayed and the track name is scrolled.
PC LINK and the elapsed playing time are displayed.
3
MC-W770 QUG/22.1 eng
8/23/01
10:45
Page 4
7 Setting the clock
CD5
CD4
REPEAT PROGRAM
REPEAT PROGRAM
VOL
ALBUM
BROWSE
SLEEP
CLOCK
1 Press and hold CLOCK on the
remote control for more than
2 seconds.
➜ SET CLOCK is displayed, the
hours and minutes digits start
blinking.
SLEEP
2 Press ALBUM 5 or ALBUM ∞ on
CLOCK
4 Press CLOCK on the remote control
the remote control repeatedly to set
the hour.
to confirm the setting.
➜ The clock shows the set time.
3 Press 4 or ¢ on the remote
control repeatedly to set the
minutes.
8 Timer setting
TIMER TIMER ON/OFF
VOL
ALBUM
BROWSE
CD
DSC
TUNER
AUX
PC LINK
VEC
REPEAT PROGRAM SHUFFLE DISPLAY
CD1
CD3
CD2
SLEEP
CD4
CLOCK
TIMER TIMER ON/OFF
CD5
1 Press and hold TIMER on the remote 2 Press CD,TUNER or PC LINK A on 3 Press ALBUM 5 or ALBUM ∞ on
control for more than 2 seconds.
➜ X starts blinking, SET TIMER is
displayed and the hours and
minutes digits start blinking.
the remote control to select the
source you want to be woken up
with.
the remote control repeatedly to set
the hour.
4 Press 4 or ¢ on the remote
control repeatedly to set the
minutes.
5 Press TIMER on the remote control
to confirm the setting.
9 Demonstration mode
●
H
4
To activate the demonstration
mode press and hold
STOP DEMO Ç for 5 seconds
during standby or Eco Power standby
on the set until DEMO ON is displayed.
3103 305 2021.2
●
To deactivate the
demonstration mode press and
hold STOP DEMO Ç again on the
set for 5 seconds until DEMO OFF is
displayed.
PDCC-LC/JW-0435
Download PDF

advertising