Philips DVDR520H/37 User manual

Add to My manuals

advertisement

Philips DVDR520H/37 User manual | Manualzz

QUICK USE GUIDE

DVDR 520H

1

CONNECT THE DVD RECORDER

Switch on the TV set and select the correct video input.

Press the [SYSTEM

MENU] button to adjust your peference setting of this DVD recorder.

Press [p] [q] to select an item in the menu.

Press [u] to access the selected item’s options.

Press

[OK] to confirm your selection.

Connect the antenna cable from the wall antenna outlet to the RF IN terminal on the back of the DVD recorder.

Use another antenna cable to connect the DVD recorder’s RF OUT terminal to the antenna in terminal at the back of your TV set.

Use AUDIO/VIDEO cables (red/white/yellow) to connect the DVD recorder’s AV OUT termianls to the AV IN terminals at the back of your TV set.

Connect the power cable from the DVD recorder’s AC IN terminal to the power outlet.

2

PREPARE THE

REMOTE CONTROL

3

START INSTALLATION

Press [STANDBY-ON ] to switch on the DVD recorder.

Language menu appears. OSD lanuage : select on-screen display language.

System menu appears.

Video output: sets video output

TV Type: sets the TV type

Date: set the system date using the numbered buttons.

Time: set the system time using the numbered buttons.

TV tuner menu appears.

TV channel search : Go to

“Utilities” and then “start scan.” Press [OK] to start automatic TV channel scan to search and store available channels.

When completed, press [SYSTEM MENU] to exit the menu.

The DVD Recorder is ready for use!

NO PICTURES! Check if Video Input of the TV set is switched to

“AV” and press [CHANNEL ] button to select the right channel.

NO SOUND!

Check if the audio L/R jacks on the recorder are connected to the TV set, stereo system or receiver.

...cont.

4

START PLAYBACK WITH

GUIDE

MENU

5

START RECORDING WITH

GUIDE

MENU

Insert a recordable DVD+R/+RW disc with the label facing up or assure the HDD has enough available recording space.

Press the [GUIDE] button for the GUIDE menu, press [ p

] [ q

] to go to “Record” and press [OK] .

Press

[ p ] [ q ] to select signal input and press [OK] .

If TV is selected, press [ p

] [ q

] for channel selection.

Press [ p ] [ q ] to select DVD or HDD and press [OK] .

Press [ p ] [ q ] to set recording mode and press

[OK] .

Press [OK] to start recording.

Press [STOP] to stop recording.

Insert a disc if you’re playing back from a disc.

Press the

[GUIDE]

button for the GUIDE menu, press

[ p ] [ q ] to go to “Playback” and press [OK] .

Press [ p ] [ q ] to select DVD or HDD and press

[OK] .

Press [ p ] [ q ] to select the file type for playback and press [OK] .

Press [ p

] [ q

][ t

] [ u

]

to select the file and press

[OK] to start playback from.

Press [ F.F.

] for fast-forward scanning.

Press [ REW] for fast-reverse scanning.

Press [ NEXT] or [ PREVIOUS] to advance or return to the next or previous chapter/track.

Press [ PAUSE/STEP] to pause playback.

When playback is paused, press [ PAUSE/

STEP] again to start “frame by frame mode.”

Press [STOP] to stop playback.

To play the DVD+R disc on other DVD players after recording, you must finalize the disc first:

Press the [Disk Tools] button.

Press [ p ] [ q ] to select “Finalize (Make

Compatible)” and press [OK] .

Press [OK] to start finalizing the disc.

Once the DVD+R disc is finalized, no further recordings and editings can be made to the disc.

You can not un-finalize a finalized disc.

D etailed playback and recording features and additional functions are described in the accompanying user’s manual.

Need Help?

Please visit: www.p4c.philips.com

P/N: 7819900927

advertisement

Related manuals

advertisement