Panasonic FP-7735 Black and White Copier

Panasonic FP-7735 Black and White Copier
Table of Contents
Operation Chart
Plain Paper Copier
FP-7735MX/7742/7750
Options
i-ADF (FA-A888)ADF (FA-A505)/Sorter (FA-S575/S680/S685/S690)
System Console (FA-DS72/DS82)/LCC (FA-MA301)
Operating Guide
Making Copies
E
:
3
т
The FP-7735MX/ 7742/7750
Before operating this copier, please read
with options (See P.42)
these instructions completely and keep
this operating guide for future reference.
Operation Chart
Common features and usage
Hl Basic Operation
(Touch Panel Display)
7
|
| !e 0.0.
y |
Ц E
|
=== 4 | i
Load paper Copy size Number of copies
Turn Power
Switch On г 2
Position original
Cancel duplexing mode* Press Print
(FP-7750 only) J
4
E Position of the original
e Face Down on platen and in ADF (FA-A505).
Face Up in i-ADF (FA-A888).
e |f the original is not positioned properly, a
portion of the original may not be copied.
® For originals smaller than invoice size, align with
center of left original guide and select invoice.
©
e
w
E
Ш
=
Original Guide
E Common Features
Follow these steps for each copy job.
- Full Size Copying . — / | —
(See P.11) 1 J 3 5
Reduction or Enlargement — — — / —
bl К (See P.12) 1 2 3 5
( NOTE ) * The FP-7750 is initially set to duplexing mode. (1:2)
When copying one-sided copies, touch key to cancel the duplexing mode.
(See P.10)
Touch Panel Display
№ Function Categories
DUPLEX? — TSORT/ ZooM/ INSERTION
BASIC MENU ISAIG-Copy|”” FINISH| EFFECTS| JOB
= GD
100%
C) GD a
1 O © e 21 |
a Ez CI] 3 С
Basic Menu (See P.10)
(1) Photo Mode Key
(2) Exposure Control keys
(3) Auto Exposure Key
@ Current feed location selected
(5) Cassette Selection Key
DUPLEX [SORT INSERTION
BASIC ro ge "COPY = = JOB |
a E Ne 6525
E |
ÉSE
[=n
==
Duplex/Original » Copy (See P.14)
© [1] + [2] Copy Key
(2 [2] + [1] Copy Key
@ [2] = [2] Copy key
@ Book =p [2] Copy Key
(5) 2 Page Copy Key —
® 2 in 1 Copy Key
(7) SADF Key
DUPLEX ISORT/ |ZOOW INSERTION
BASIC MENU Bue A | fe EFFECTS
M pu PETT
@Nonsort € Sort © Sjaple €) Group
SELECT
ru Co
Sort/Finishing (See P.19)
(1) Nonsort Mode Key
(2) Sort Mode Key
(3 Staple Sort Mode Key
@ Group Mode Key
(5) Hole Punch Mode Key
(6) Staple Position Select Key
DUPLEX | SORT/ ZOOM INSERTION
BASIC MENU (dG +Copy|” FINISH] EFEECTS| * JOB
Zoom Edge Margin Book
rá 22 7 CM) В
0 O © о
Zoom/Effects (See P.22)
M Zoom Key
(2) Edge Mode Key
@ Margin Mode Key
@ Book Mode Key
BASIC MENU DUPLEX SORT ns | “RPM ets] INSERTION
CAIG+COPY FINISH ns | “RPM ets] SN
Bay
©
| Presentation
OHP interleaving
Page insertion
155) Se
Insertion job (See P.26)
M) Cover Mode Key
(2) Page Insertion Mode Key
(3) OHP Interleaving Mode Key
@ Presentation Mode Key
TT M OO © ÿ >
4
BASIC MEN [BR ER py] “Finish |“ BRrECTS | JOB
NONSORT ZOOM COVER
0-2 EF E Ei
À (2) + 1] E) EH SORT EDGE INSERTION
[2] = [2] E » = :
STAPLE SORT| MARGIN | INTERLEAV.
500K [2] Eg)” = OHB „HR
L
2 PAGE ESPE) croup BOOK PRESEN.
2141 » = top)
3
Basic Menu Selection
® Displays all functions when touching
Basic Menu Key.
e Touch Basic Menu Key again to return
to the basic screen.
уч
QC
5
O
с
o
pre
0
|.
Le,
e
o
A,
8
©.
qu
Oo
©
c
A
a
£
©
=
о
>
Energy Star
HE,
/ —
The FP-7742 & FP-7750 copiers comply with Tier 2 of the Environmental Protection Agency's
Energy Star Program. This voluntary program specifies certain energy consumption and
usage standards for copiers. Specifically, the FP-7750 will automatically default to duplexing
or two-sided copying mode when more than one original is placed in the document feeder. In
addition, both the FP-7742 & FP-7750 will automatically “power down” after a specified period
of non-use. The use of these Energy Star compliant copiers will reduce energy consumption
and ultimately benefit the environment.
The default functions can be adjusted depending on your office requirements. Please see
your authorized Panasonic copier dealer for more details. >
N
Table of Contents
PEC AULI ONS oo e tear ane a asa naans O 6
Making Copies
Basic Menu......................eererriiereiion er area ener eirrrenenaecacenerea rre reneneacarocaneevacene era reare econ rerceronee ere 10
E Full Size Copying .................e-.eemeeirme e e O RR O eee 11
E Reduction or Enlargement Copying ...................ee..ee.erreemmien e 12
№ Using the Sheet Bypass ...........................e00000000 ee III III II O AA 13
Duplex/Original ® Copy.....................e.e..ereeerereeeseiierieee erre re De ercer eeereneececeneoeeecaeerearoceren ace. 14
№ [1] > 2/2) > CODE 15
(2) > [2]/2 Page Copy ...................... 2.20 RR RD 16
IB Book » [2] Copy .................. viernes 17
№ 2 in 1 CODY eee eee eee eae ee, 18
Sort/FiniShiNg..…......…..…......…..……ecrccrscsserrressar ere ererrenanene rene nanas rer serre pan a nana nee area rase eee 19
E Procedure ..................eeeeerier racer eee reee racer rereeeeeenecenceceis 20
Zoom/Effects............................eninerimi oercere recae reare eee eee eer areata eran earns 22
Bl ZOOM COPYING coisa eee eee eens, 23
E Edge/Margin/Book Mode................... ee. A 24
Insertion Job .........................eie..ermieieienee cer rr rear necereearerererrneete enter rareaccrn e reareecaro ra raat rasan eens 26
BE GOVT. O RER EEE 27
№ Раде Insertion .....................ieeeeaieec eme eee nera eee 28
Ml OHP Interleaving/Presentation ...................—....._ vee DA 29
Other Features Bl Program Copy JOD o.oo eect, 30
BE SKYSNOt MOTE... eevee eee eee eee eves teers eens en ese 31
E Energy Saver/Interrupt.................e.eee eee e nen ea rareee 32
M Changing Paper Size ..................xx.....11ierireeeere DI II II O IRIRIRIADO 33
Combining Function Table ..........................—....rmerrieeciner rene er ener reoeeneeranerereeneereaeeeee ena nro cree. 35
Ed erre een ar nen raerar retar eae san san era sara SANS RD Nec 36
Bl COMPONENTS coco eee Ree De ROO ee e eee 42
№ -ADF/ADF …..............<seccccrerrarerrerrrsrrarserrrenananeranenn a nane er ana rene annee 43
HE Sorter….….…....…....….….....….srseereenersrenresseserae car ae raen ee rreee era reset ere een 45
Maintenance
Handling I Adding Paper eerie eee R EEE 48
Bl AQAING TONE... eae eee rare. 50
E Removing a Paper Misfeed............................01100000 00m IDA 52
Checking E Troubleshooting........................eeeeeeie eee KEE EEE 62
Specifications
E FP-7735MX/7742/7750, FA-A888/A505....................__.eeeeenirer e en. 60
E FA-5575/S680, FA-DS72/DS82, FA-MA301........................eomme.. 61
M FA-S685/S690..................e.eeeeeciecerer DD IR O IR IR RD RR Re ea 64
©
цы
с
D
Pr
=
oO
O
af
о
к
Te
1]
-
Precautions
M Do not look directly at exposure lamp when
copying.
B Do not turn the power switch off or open the front
panel during copying.
® Do not drop paper clips or other metal objects into
the copier.
№ Store toner, developer and paper in cool areas
with low humidity.
e High quality paper of 16 Ibs. - 24 Ibs. (15-30 Ibs.
via sheet bypass) may be used.
© For optimum performance, it is recommended that
only Panasonic Brand supplies be used in the copier.
Bl The copier should be installed in a well-ventilated
area, to minimize the ozone density in the air.
following conditions:
e Extremely high or low temperature and humidity.
Ambient conditions
Temperature: 50°F — 86°F
Relative humidity: 30% — 80%
® Area where temperature and humidity can change
rapidly.
Direct exposure to sunlight.
Directly in air conditioning flow.
In areas of high dust concentration.
In areas with chemical fume concentration.
e
e
e
| e In areas of poor ventilation.
e
© |n areas with extreme vibration.
e
With unstable or uneven conditions (floors, etc.).
M The FP-7742/7750 power consumption is 1.5 kW. A properly wired (with ground), dedicated,
15A, 120V AC outlet is required. Do not use an extension cord.
For U.S.A.
Installation
Æ The copier should not be installed in areas with the
This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his/her own expense. ;
Any unauthorized changes or modifications to this equipment would void the users authority to
operate this device.
A
с
O
=
©
9
OD
pd
a
Control Panel
Energy Saver Key Interrupt Key
(See P.32) (See P.32)
User Preset Key Manual Key |Reset Key
(See P.36, 40) (See P. | 1) [Press to reset all features
to initial power-on state.
| Lo 1 bd
Гот о
—
(С)
| v
y | 12000)
NE — — J _
Multi-size Original Size Touch Panel Display Ready Indicator |Clear/Stop Key
Feed Key Keys Press to stop copy run or
(See P.44) , clear copy count in display.
Job Memory Key Copy Size Keys Quantity Keys Print Key
(See P.30)
Fa | WA
ES ; Oca O
_ | BASIC MENU Dre Copy] This a NSEER ON 1—®
A 7 SS >
10— (EDGER
100%
— (EDGER) 71)
D [ | 2 ll HH
12 a] | [foe] e ==> NE
$ 466$ Фо
@ МОТЕ D e Adjusting the touch panel display contrast
Adjust brightness of the display by repeatedly pressing Ledger or Invoice original size
key as necessary while pressing and holding the Clear/Stop key.
To make the display brighter: Ledger size key
To make the display darker : Invoice size key
| dw mm
ое
H Touch Panel Display Indications
No Contents Refer to
Warning indications |
(1) ® The copier will be disabled after this display is on for some time. P.51,52 _
LA]; Add toner, ГИ: Replace waste toner bottle, Y : Call service. =
(2) Message area * =
(3) Warm-up Time indication Е
(4) Number of copies ©
‚6 Machine/User Error Code indication (E1-01, U13, etc.,) P.62
© Function Categories | 19 > e
7) Programmed Functions-1 ; P.14, 26
Selected Paper Tray and Paper Status indication Р47
2: Tray position, |=]: Normal, ||: Low paper, |=. Add paper
(9) Cassette Selection key P.10
do: Programmed Functions-2 P.22
(11) Sorter Functions P.19,45
de PHOTO Mode Selection key a | P.11
13 Original Direction and Size indication
(de Copy Paper Direction and Size indication
(is) Copy Ratio indication
de Manual Exposure Select keys (Light and Dark) P.11
1 Auto Exposure key =
(e Copy Image indication
de Paper size and direction indication
(с AUTION ) e Use soft finger pressure only to activate touch Screen panel. DO NOT USE
ne OBJECTS such as pens, fingernails etc., as this may damage the
9
Basic Menu
E Initial Screen
eu Set number of originals
press OK
—_— —d ¡Ú
FP-7750 BASIC ven [BURLEY py ЗО NIH PO ers] INSESTION
| sn Odd N b jai
FP-7742 ue E ina? [Яр | ne]
a Е м | |
об» 2 | | OK |
CN
J ® To make 1-sided copies,
Ready to copy 1 TT touch copy key.
EE re a М ® Input the code number, if
appears.
(LETTER)
100%
E
2 =|
COC mo oe
| ee [ LIGHT Tes auro| Г DARK | CASSETTE
(When placing Letter size originals)
® Touch CASSETTE Key if
necessary.
Select paper tray |
press OK e Select paper tray required.
—— ee —— | * Touch OK key.
Ir = E LEGAL DO)
= т LETTER D | [O LETTER DO
1 ADU
2 = a LEGAL D)
3 U
> 11) [5 voice OK
10
Full Size Copying
When copying the same size as the original (1:1)
B Copy size and copy density are automatically selected.
Original Size Keys Touch Panel Display
Position original Number of copies Press Print
Up to 999
B When manually selecting exposure control or original size:
( ÓN
Select exposure contro!
Ready to copy 1 (1) Press the Light or Dark key.
anse mens DUREE SORT [2998 | NSERTÓN) (2) Press the Photo key to copy photos and
halftones.
100%
D
2 |=
O
N »
( | |
Select original size. В
(M Press Manual key.
n——— Lights up (Manual mode)
(2) Select original size with Original Size key.
aa y
® Benefits of Quantum™ Technology:
The FP-7742/7750 features Quantum™ Technology which utilizes an advanced form of artificial
intelligence to ensure optimal copy quality and performance under varying environmental
conditions, from a wide range of originals.
( NOTE ) ® When message ADD PAPER appears, place selected paper into paper
drawer/tray.
11
=
=
с
‚=
Oo
7
Ss
a
©
£
>
a
o
O
©
N
о)
Е
Ц.
Reduction or Enlargement
When copying with preset ratios
M There are 5 preset reduction and 4 preset enlargement modes.
1
Position original
3 4
Select the copy size Number of Press Print
{Landscape for letter size)
copies
Ready to copy
1
DUPLEX — TSORT/ Zoom TINSERTION
BASIC MENU Der oy! Chis | 2M ers] JOR
65%
D
са 9 CS E Ec
2 =)
| PHOTO | | Quah || @ auto | № сяк | CASSETTE
Example: Reduction
Original size Copy size
LEDGER |=» LETTER
The correct ratio is automatically selected.
Reduction and enlargement ratios (%)
Original Copy size
size Ledger | Legal | Letter | Invoice
Ledger ; 100 77 65 50
Legal 121 100 79 61
Letter 129 100 100 65
Invoice 200 155 129 .100
e When changing the paper size, touch
Cassette key.
— Paper Tray (CASSETTE) Key
N
J
ATTENTION e Part of the image may be deleted if the direction of the original and copy paper do not
correspond. (See the image indications on page 8.)
C NOTE D e When copy size is different from paper size of paper drawer/tray, use sheet bypass.
12
Using the Sheet Bypass
When copying on special paper, etc.
H To copy on letterhead, mailing labels, transparencies and odd-size paper,
etc., or to use bypass as an additional paper source.
Position original.
Open sheet bypass.
Sheet Bypass
Pull out bypass tray until it stops.
ra
=
QQ
=
at]
cn
Bo
=
=
u
|
о
c
. 0
pe
Q
=
Lo
&
oc
Using the Sheet Bypass
@ Place approximately 50 sheets of
paper.
2
3
4
Ne Do not fill above.
Insert the paper until it stops.
(2) Adjust the side guides.
Incorrect adjustment may cause
|. Guides paper to wrinkle, misfeed or skew.
Press Print.
C NOTE ) e The bypass has priority over the paper drawers/trays. The copier
automatically selects the sheet bypass when paper.is placed in the empty
bypass tray.
e Some types of mailing labels and transparency film may damage your
machine. Please contact your service provider for advice regarding
non-standard paper types.
13
Duplex/Original » Copy
When touching DUPLEX/ORIG. » COPY key
E Initial Screen
Select function
2 — = ——0- meg masse ‚== dd — --
| _ I o
DUPLEX/ — TSORT/ — IZOOM/
BASIC MENU (oRIG-Copy| FINISH | EFFECTS
Pu неее о нс
[1]+[2) || 21-01 || [2] +12] | |Воок>[2]
NE EEE EG
2 Page 2 in 1 SADF
|
he rer 1 A BALL не ны сосны не нанес ен = A нее кент AAA A A mm ———_— ее
INSERTION
JOB
|
|
|
|
|
|
13:
—
le ee = = к A A A o mea
———
e Touch the desired key to select the function.
( |
1 ) 2 case originals to 2-sided — See P.15
2 1 ce CE originals to 1-sided _ See P.15
2 2 cae Soe originals to 2-sided > See P.16
Book =) 2 From book originals to 2-sided copies = See P.17
Copying two facing pages of a ledger
2 Раде size original on two separate letter = See P.16
size sheets.
. From two 1-sided originals side by
2 IN 1 side to 1-sided copies. = See P.18
A special original (like thin paper etc.,)
SADF can be fed from the ADF/i-ADF > See P.44
original tray.
ATTENTION
® 2-sided originals may be handled either manually or automatically using the i-ADF
(FA-A888).
e Toreset Duplex/Original » Copy mode, press Reset key.
e Press the reset key to feed out last copy existing in the ADU (Automatic Duplex Unit).
14
1] > [2/2] > [1]
№ | > [2] Copy
From 1-sided originals to 2-sided copies.
From Copier Platen 8 i-ADF/ADF
Position Count (4
originals originals
(1) => В) опу) (ADF)
~~
E (2) + [1] Copy
From 2-sided originals to 1-sided copies.
Using i-ADF
1 56
Touch [1] =» Number of Press
original size or [2] = [1]mode copies Print
(Up to 50)
7
Set number of originals (1 For odd/even originals, touch Odd/Even key. D
press OK 1 _ .
——]—] . (2) If number of originals is unknown, touch
[asi menu RE [SORT QM TINSERTION Original Count key.
=, Odd number VE
orginal |LA7 | ||| Orginal | E Touch OK key,
= Even number e @ Return Originals to the i-ADF.
БЕ original Aa E
[CANCEL] | OK | |
\ ”
C NOTE ) ® To reset each mode menu, touch Cancel key on the touch panel.
e Press the reset key to feed out last copy existing in the ADU (Automatic
Duplex Unit).
15
>
Q
о
e
A
m
£
2
Le
©
É
К
=?
=
Oo
Duplex/Original » Copy
№ [2] = [2] Copy Ш 2-Раде Copy
From 2-sided originals to 2-sided copies. Copying two facing pages of a ledger size
Using i-ADF original on two separate letter size sheets.
ALN
E Procedure
Using i-ADF ([2] + [2] Copy)
4 5
Position Select copy Touch [2] = Number of Press
riai size* or 2 Page mode copies Print
originals (ur 150 )
in [2] => 2]
4
Book on the platen (2-Page Copy)
Ledger size original
Pt
Center book
| by length
Center — — ГОД and width
| according to
| — center marks.
J
A
Book mark
N J
E a —"—_— "— "—_—_—_— — —_m——————— АООЛОООАНОАННИИ
( NOTE В % For reduction or enlargement copy only.
® To reset each mode menu, touch Cancel key on the touch panel.
e Press the reset key to feed out last copy existing in the ADU (Automatic Duplex Unit).
16
ВооК =} |
IM Book =p [2] Copy
From book originals to 2-sided copies
Ledger size originals only.
(Facing Pages).
- O O 0000
Cao QOH 100 |
=
Cl
O
. ©
; =
+ e | 2%" ` 4
NR — = | — Е:
+ — |
=
©
1 2 3 45
Position original Selectthe Select Book =p Number of Press Print
on the Platen copy size mode and Copy copies
JL | format JL (Up to 50)
4 Se original NO \
Ledger size origina Select facing page or 000
E — Center book book format, press ( OK
| | by length [Basic EE ЗО usr [200w ers INSERTION]:
Center — - | - and width NN Da |
| according | Book format Facing pages | |
: = marks. | aja (a) -: |
4 1 | '
Book mark | | |
N 21 Loanced Le _J. |
oe oo Ш
® Make copies from last page in Facing pages — ==
and Book Format mode. N . Touch OK key.
C NOTE ) ® To reset each mode menu, touch Cancel key on the touch panel.
® Press the reset key to feed out last copy existing in the ADU (Automatic
Duplex Unit).
17
Duplex/Original » Copy
E 2 in 1 Copy
From two 1-sided originals side by side to
1-sided copies.
a
sn o a ^_ 8
D
o
H Procedure
Using i-ADF
H4in1Copy
From four 1-sided originals side by side to
2-sided copies.
Press
Print
Number of
copies
Touch 2 in 1
mode
For 4 in 1 Copy
Position originals Count
(Top side down) originals
M4 in 1 Copy
with combined 2 in 1 and [1] =
Copy mode, 4 in 1 Copy is available.
y
(1) Original counting must be done. (See P.15)
(2) Touch DUPLEX/ORIG. » COPY key.
@ Select [1] = [2] mode.
@ Return originals to i-ADF.
(5) Perform steps 4 and 5.
N и
C NOTE ) © 2 in 1 (4 in 1) Copy can only be made from Letter size originals.
18
e Press the reset key to feed out last copy existing in the ADU (Automatic Duplex Unit).
Sort/Finish
When touching SORT/FINISH key
Ш Initial Screen
Select function
Г —' mam mam ETE — = EE ER ma Lm Ee EE wr Ns A EEE шо WT ==. TEE TEE EET EE mpl EA A EE
DUPLEX, TSORT/ ZOOM/ | INSERTION
BASIC MENU | ORIG»COPY! FINISH| EFFECTS| JOB
г — o A E =
——
|
I [OD [BE | Do]
!
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
ea ZI a
, В <, SELECT | ||! E
i ¢ A
1 I )
a | © =
or
. a |
® Touch the desired key to select the function. Displays when selecting Staple Sort. E: "a
To reset Sort/Finish mode, press Reset key. gt
QW
Y
All copies are placed in the top bin
Nonsort (Nonsort tray/FA-S680/685/690).
1 copy of each original is placed into a
So rt separate bin. = See P.20/45
Sorted copies are stapled
automatically.
(FA-S680/685/690 and i-ADF/ADF) — See P.20/45
Stap | © So ri FA-S685/690 can select three staple
positions.
Multiple copies of each original are
G rou D placed into separate bins. = See P.20/45
All copies can make with 3-hole (or
_/
( NOTE В Ledger | Legal Letter {Letter R| Invoice
3-hole Yes No Yes No No
3-hole and Staple Sort Yes No Yes ‘No No
*2-hole (Option) Yes Yes Yes Yes No
2-hole and Staple Sort Yes Yes Yes No No
19
Sort/Finish
О
E Procedure
00 =
- 6166 В
_— es _ 0
1 2 3 4
Position original Select modes Numberof | Press Print
(Up to 50 sheets) copies
VW
Group |
E E
2
1
= ЕВ
Staple Position 3
>
wf co
"NU
№№.
La £
Platen
| ^ #— Staple I
AN Position a 20 sets u
Original — = |_Staple Sort _
Guide =— Staples sorted sets of up to 50 copies
N J (FA-S680/S685/S690 and i-ADF).
- Hole Punch |
FA-S685/S690:
fe All copies are made with 3-hole (or 2-hole*)
Three positions can be selected. en FA-S690 and i-ADF).
SELECT # 2-hole punch unit is available as an option.
[| (See page 19)
a
Ea
20
B Manual staple copies (FA-S680/S685/S690)
Place copies to be stapled into Nonsort tray of
the sorter and press Manual Staple key.
Nonsort
tray ———
|
Size: Invoice to Ledger.
Number of copies:
Up to 50 sheets, 20 №5.
Copies
Staple
Position
Manual
Staple
Key
=
For FA-S685/S690:
Three manual staple modes can be selected
after making copies with sort mode.
(1) Select the desired staple mode (A, Bor C)
with Staple Mode Select key.
B: except Legal size
(2) Press the Manua! Staple key.
Staple Mode Select Key
H Count Down Sorting Function
Enables sorting of up to 999 sets of up to 50 originals (including stapling).
(When copying 50 sets in Sort Mode.)
(1) Input desired number of copies,
and any auxiliary functions.
(2) Select Sort/Finish, sort (2) or
staple sort (3), (6) staple position
select.
(3) Position originals in the
document feeder.
(4) Press Print.
The system will process 20 sets
and staple them if selected.
The original number of copies
desired will be reduced by 20
(for each cycle) and will be held
in memory.
(5) Remove the copied sets from
the sorter.
(6) Return the originals to the
document feeder.
(7) Repeat steps (4) to (6) until all
desired sets are completed.
Ready to copy 50
SORT/
FINISH
ZOOM
DUPLEX
BASIC MENU EFFECTS
ORIG » COPY
= SID
100%
mel
| INSERTION
JOB
Е с) С ел С CC] ho |
A |< LIGHT || @® AUTO | > DARK |
INSERTION
JOB
ZOOM!
EFFECTS
Г DD
= = =
@Nonsort Y Sort © Slaple €) Group
gros [a (a) Le #6:
SORT/
FINISH
BASIC MENU rE
=
When using platen, the copies will not be stapled automatically, press
Manual Staple key after copying is complete.
oF
( NOTE) °
When the overflow indicator appears on the display,
remove excess copies from the bins, then press
SORT/FINISH mode key to reset.
For FA-S680/5685/5690: Remove excess copies from the bin(s).
21
Zoom/Effects
When touching ZOOM/EFFECTS key
BB Initial Screen
Select function
[oo Ea DUPLEX? |SORT/ _ |ZOOM/ — TINSERTION|.
BASIC MENU GR Copy!” FINISH | EFFECTS| “JOB” |
Zoom Edge Margin Book
"=
OT e e
TN
Na
e Touch the desired key to select the function.
С Copies with variable zoom ratios from В
Zoom 50% to 200% in 1% increments. = See P.23
Edge Creates a blank edge. — See P.24
Marg | N Shifts image to right. — See P.24
Book Eliminates dark inner binding shadows. — See P.24
> ”
(o NOTE ) ® To reset Zoom/Efiects mode, press Reset key.
22
Zoom Copying
H Procedure -
23 45
Position original Select zoom Select desired Number of Press Print
ratio paper size copies
@ Zoom Ratio: 50% - 200% a
Set zoom % 1
Press OK | © Touch Zoom/Effects key.
pas Menu [SEC io [730M rs [NSSETON @ Touch Zoom key.
= (3) Press and hold the Down or Up key.
|A | (Increase in 1% increments.)
o
77% E [4 ] (UP) For enlargement
| [v ] (Down) For reduction
[CANCEL] | OK | @ Touch OK key.
(1) Touch Cassette key. -
Ready to copy 1 (2) Setect the paper tray (paper size), then
o a O ao OK
77%
D
| 2
PHOTO CASSETTE
Le] q LIGHT || QU auTo] | p par] E Paper Tray (CASSETTE) Key
\ >
® Па different paper size is desired, press the Paper Tray (CASSETTE) key.
ATTENTION ' > te |
When Copy Size key is pressed, the ratio will return to preset position.
( МОТЕ ® То reset zoom copying, press Reset key.
23
® To reset each mode menu, touch Cancel key on the touch panel.
М
fir
©
Q
a
"E
a
=
O
©
N
Zoom/Effects
Edge/Margin/Book
Edge Mode
Creates a blank edge.
The edge width is initially set at 5 mm.
Range can be set from 5.0 mm to 95 mm in
5.0 mm increments.
Book Mode
Eliminates dark inner binding shadows.
и
loo
+
@ Margin Shift Mode
Shifts image to right.
The margin is initially set at 10 mm.
Range can be set from 2.5 mm to 97.5 mm
in 2.5 mm increments. (See NOTE)
^_ (A >
Book mode is initially set at 20 mm. Range
can be set from 2.5 mm to 97.5 mm in
2,5 mm increments.
E Position of the original
( Margin Bi. ADF ( Book Ledger size original
Platen i- —
M i —
АТ Center book
o. Center — i by length
„с | and width
e | according to
- ZR 7 center marks.
}
Originat Guide =
`` —]
N
Book mark |
( NOTE В e |f Margin shift mode cuts off right side of image, use Margin reduction mode (85%,
93% or 91%) to create a margin. (See P.36)
e The Book mode is useful for eliminating dark shadows associated with book or
magazine copying.
e In reduction or enlargement copying margin size changes in proportion to copy size.
24
H Procedure
/ | — AA И E
Position original Select modes Number of Press Print
u copies
Y
sj
4 RY о
Edge @ Touch Edge, Margin or Book key. =
| x 2 Adjust the width of void area with [=<] [=] keys. =
| 5.0 = | =
Sn ha | Initial setting*
| (CANCEL | OK | | Edge mode: 5.0 mm
cs ess о Margin mode: 10.0 mm
Margin Book mode: 20.0 mm
et [Ori ory] *° “rms [or i a Touch OK key.
| + 10.0mm = |
| CANCEL] | OK | |
Book
| Р.Ех/ [SORT/ |zoom/ _TINSERTION
BAS MENU | BERK pv] > FINISH | EFFECTS| 508
| - Ч 20.0mm A]
|= |v
|
| [CANCEL] | OK
——] — e À
C NOTE ® To reset each mode menu, touch Cancel key on the touch panel.
* To change initial setting of default, see page 36.
25
Insertion Job
When touching INSERTION JOB key
HE Initial Screen
Select function
| DUPLEX, 16087” [200M/ [INSERTION]
BASIC MENU | oRIG COPY)” ” FINISH |” EFFECTS| JOB
— — = ее — - = ae. я
| Presentation
| OHP interleaving "E |
| Page insertion OHR |,
Cover
= Е:
+ a . r - =. . - . oo = - + = mar
® Touch the desired key to select the function.
ai
Cover Adds cover page(s) to the copies. > See P.27
Page Inse rtion Inserts paper between the copies. — See P.28
OH P interleaving Inserts paper between OHP film. = See P.29
Inserts paper between OHP film and
Presentation make copied sets for hand-outs. = See P.29
C NOTE ) e The i-ADF/ADF and Sorter are required for Insertion Job.
® To reset Insertion job, press reset key.
26
M Features
Ce |
Cover Blank Paper Copied Paper
Attaching cover page(s) with Front Front Front Front
blank/copied paper. | F Е
Back Back
Nu
MM Operation
ADF
1 4 (2) 3 506
Position Select Select original Touch Number of Press
originals paper tray size (ADF only) Cover key copies Print
( N (1 ÓN
Input number of originals | Select the mode
select paper tray, press OK 1 press OK
: Number of . aor Ё
originals 0 re Cover(Front) Cover(Front+Back )
Blank Copy Blank Copy |
| (Cover) LETTER [J (= | Le | UE LE, EEE
| Сов Eme CE] CE)
ICANCEL| | OK | (CANCEL) | OK |
N N | 7
C NOTE > ® |f number of originals is unknown, touch Original Count key. (See P.15)
® To reset each mode menu, touch Cancel key on the touch panel.
27
к
Oo
hr |
|=
O
=
=
ob
U
с
Insertion Job
Page insertion
H Feature
Page insertion Blank Paper Copied Paper
Inserting paper between the 1 Color paper
copies.
—
Blank paper, colored | 3 |||! 4
paper or copied paper.
N —
Bl Operation
Position 7 Select original Touch Page Number of Press
4
- originals size (ADF) _ insertion key copies Print
® Input number of Originals“ and Select I
- Paper tray then press OK. (See P.27)
UU Select the mode, Blank or Copy, then
out th tion ot insert press OK.
nput the position of inse ; ;
press OK Color paper is suitable for copy mode.
| Sheet
| A
| 3 6 1 15 29 (M) Input the interleaving position with
31 38 47 Quantity keys.
| (2) If you input more than 2 places, move the
input position with key. (E1/ Ed)
- (3) Repeat (1) and 2.
|<| |САМСЕЦ [ ok | [+] @ Touch OK key.
q _
SE NOTE ) © [f the old interleaving position(s) is/are left, cancel the old data with key. (E1/ Ed and
Clear/Stop key)
e To reset each mode menu, touch Cancel key on the touch panel.
* If number of originals is unknown, touch Original Count key. (See P.15)
28
OHP interleaving/Presentation
HB Feature
. | ÓN
OHP interleaving Blank Paper Copied Paper
Inserting paper between 1 1
OHP film OHP OHP ©
Blank paper or copied
paper
N
N
Presentation Blank Paper + Copies Copied Paper + Copies
Inserting paper and copies. 1 a 1 7
OHP OHP[( A
+ (2) + (2) ©
Blank paper or copied c
paper OHP OHP 2
2
N / c
HB Operation
1 2 (3
Place OHP
(Sheet Bypass)
Position
originals
Select original
size. (ADF)
Touch OHP interleaving
or Presentation key
4 506
Number Press
ofcopies Print
~~
(1) Select the mode, Blank or Copy, then touch OK.
(2) Select the paper tray.
-—s — ls == — a ——| o "= = = сет са oa EE ty
C NOTE В * Selection of the paper tray. —
(ex. Presentation mode) |
Select the paper tray for page | | LETTER [7 ШЕЕ
Cron and copy, then touch LETTER [0 Ce) |
| | Copy) LETTER D [=| |
ICANCEL| | OK | |
Ed оо = AA A же — ——__ = =
29
Programming Copy Jobs
IM Five copy jobs can be programmed in memory (M1 to M5) for recall at a
later time.
Job Memory Key
( N
To store a job in memory
Job memory (D Set up the copy job to be stored in memory.
select Mem. in or Mem. # e in
(2) Press Job Memory key
| &] 160mm x 70mm |
El 2207mx95mm vz] © Touch Memory In key. ({Mn])
= Ce ee 21 | ME Е) [МЗ | | @ Touch M1, M2, M3, M4 or M5 key.
| | [М5 |
Job memory To recall a job stored in memory
select Mem. in or Mem, #
| - D Press Job Memory key
| ES 160mm x 70mm [M1]
| | (2) Touch M1, M2, M3, M4 or M5 key.
| E] 220mm x 95mm [M2 ]i |
| mo EF = am 5 @ (| (3) Press Print.
Ca)
| ca acm ab > Dm E Ma]
E 141% Cu EF = п WE |
— o y
( NOTE )
e Job memory mode will not be deleted even if power switch is turned off.
® When storing a new job, the previously stored job will automatically be deleted and
the current job stored in its place.
® To reset Programming job, press reset key.
30
Skyshot Mode
HE TT
Ш By setting a check size (or the size of another original smaller than
Invoice size) in the user preset mode, it is possible to make copies from
small originals without dark areas around the image.
e Setting of Skyshot mode by key operator (See P.37, 39)
Size programming
(1) No.1 of 3/4 screen: Select Skyshot mode function. set dimension, press OK
(2) No.5 of 4/4 screen: Input key operators code number. — ly =
@ No.3 of 3/3 screen: Input a size (M1). (71 2) 0
@ No.4 of 3/3 screen: Input another size (M2) if necessary. || == ¡| 70m |X |
(5) Touch OK key.
Above sizes are memorized in M1 and M2.
{460 mm |[_Y |]
Lars
po —= — == [——— _—]——
1 ld
№ Operation
un
a
©
©
„
a
o
o
e
=
=
=
©
Le
e
o
Ta
à
Platen
= 3
. Center |
|
Install the (1) Position original Press Job Select M1 Numberof Press
(Ontion) (2) Ar guides Memory key orM2 copies Print
pu e
Example:
M1: FADF
M2: Platen
7 N I
Job =
select Mem. in or Mem. 4 e in
El 160mm x70mm A
& 220mm x 95mm (mz
*Align edges | — |
to the arrow. | [ms | |
|
i
[ws |
\_ Check Feeder / \ 1 — = 1
( NOTE ) e When using the skyshot mode (M1 and M2 are turned ÓN), the other job
- memory cannot be used.
e In the Skyshot mode, letter size paper is selected automatically.
® То reset Skyshot mode, press Reset key.
31
Skyshot Mode
Energy Saver/Interrupt
Energy Saver Key Interrupt Key
Print Key
M These modes can save power while the copier
is not in use.
Energy Saver Mode
M To enter this mode
ENERGY SAVER Press Energy Saver key or automatically enter
-B- after 15 minutes from the last copy. The
indicator will flash.
(2) To cancel this mode and make copies
Press Energy Saver key again.
Auto Off Mode
(M Automatically enters after 60 minutes (or
1.5 hours/FP-7750) from the last copy. Copier
power will drop and the indicator will light.
(2) To make copies, press Energy Saver key.
7
( DS
INTERRUPT Interrupt Mode
® This mode can interrupt other copy jobs while
making copies.
(1) Touch Interrupt key, then indicator will light.
(2) Make other copy job.
© Touch Interrupt key again to continue original
job.
Ne —
( NOTE ) e Energy saver time (15 minutes) and Auto off time (60 or 90 minutes) can be changed
— by key operator. (See P.38, 41)
32
Changing Paper Size
Paper Drawer/Tray (Copier Main Unit)
E The paper drawer/trays are designed to accommodate invoice, letter,
legal and ledger size paper. To change the paper size, consult your
service technician for proper instructions.
Perform following steps as shown below after any locking screws have been removed.
Energy Saver/Interrupt
Changing Paper Size
E. К
O | 00 loo o o.
OO, | 209
O| O O
OOO 56500) |
ul Wu U В Quantity Keys
User Preset Key Touch Panel Display
Press User Preset Key.
User preset mode Touch Paper size (1) Key.
select item
| 1 Paper size
| 2 Paper size priority Letter HN
3 Margin value default 10 mm
4 Edge value default 5 тт [|] |
5 Book value default 20 mm |] |
|| Le] Ga) [=]
Select paper tray Touch a paper drawer required.
press OK
=== —| Paper size is changed* by touching the
| | key until the required size appears.
| +
{
| 13) LEGAL OS |
|
| 4] LEDGER |
|: В) LETTER OK |i |
( NOTE ) ® Automatic Duplex Unit (ADU) is * Paper size is changing as follows.
installed in the first {1) drawer.
Ш — LEGAL? —= LETTER Si
INVOICE © + LETTER
33
Changing Paper Size
Select paper tray
press OK
Repeat, if necessary, to set another
paper drawer.
After setting all paper drawers, touch OK
key to return to the initial User Preset
screen,
User preset mode
select item
À
1 Paper size N
2 Paper size priority Letter C_]
.| 3 Margin value default 10 mm [
1 4 Edge value default 5 mm [|]
.| 5 Book value default 20 mm [|
| Ce | (1/4) [= |
Boa om EL, wo. E“;
Touch OK key to return to the Basic
Menu screen.
M Adjust paper guide (9) to the
paper length.
@ Adjust paper guide ® to the
paper width.
Squeeze the stopper to move the paper
guide () to the desired paper size.
( NOTE )
Change the paper size indicator.
Take out and re-insert the indicator so
the correct paper size is shown.
(Invoice size is on the back side)
* |f the paper drawer is not installed or is not
inserted completely, the paper size indication _
will not appear. (ex. Sth tray.) .
alge uonoung Pujuiquioo
эг15 1aded Bui1Bueyo
Combining Function Table
35
A: No combination use possible. (Last selection takes priority)
O: Combination use possible.
X: Combination use not accepted.
Jdnueju| | € | | C | C << OQl<x| <<< << <<< << <|x
A X009 JO 0|,0/0 0 OJO/JO OJOJOOJOJO O OJ|O O O
30 usen |o o O|a|a ajajajaja ja a olojo AQ OL ZOO
Qu ебра | © | © | © | © [о | о |0 |9 |900 оо |о|о с ojolo
Nu . W00Z |0|0|{0|0|/0{;0|/0|0|,0|/0|/0|/0}0|0j/0 O10|1010
3 VORBUSS9I/d | < |O|< <|O|< <|O|JO|<|O|<|«<|«< ОТО ОО | Хх
E BurggaitidHO |< [QO |i |[O |< iO |< |<< |O |< |< <|O OJOJOIX
a uomesujeBesd OO O |<|<|O|<|O|O|<|OIO <|<|O OJO OX
ES 1109 | O1010|<</|0 < 010 «\/O Ol<|<|0/101/0 .0/X
yundaioH |O | O|O TO OIO)O O OO VIO 01010/0100 «
SE dno) [O [OO |O|0O|0O |x |x| O | X| XIX [X[O|O|O|O|X
SZ pogadels (OO |O|O0O|0|0 |x |« < ООО ХО ООО ||О | Хх
mu VOS ОТО ООО |9 | < < | «< ООО | Хх: ОО ООО | X
posuoN |O |O JO |O|O 0 << | << O XIXZIOIXIOIOIOIOIO
LUZ/O|<I XI XI< ООО |О О О: О |Хх | ХО | ООО | Хх
a sSedz|x|<« | x|x|”<|o|o|ojo oïix x|oio o[o ololo
O [2] «#1009 | < | < | < < | <L< OLOIOIOLOIX XIXIXI O O1O OIX
x A ec <|« TC. «< | «ООО О ООО Хх |Хх ООО Ох
a= mea | < «< |< |< |< | о о о Го То | о То Го Те оо Го о [Хх
20 2] «(0 <|<|<|<|0|/0|/0/0|/0/0|/010:x|x|0|/0|/0|1O}X
© el s|Ë|8
s8 7, 71, 18-151 2 als EE o.
a 5 S|&/-5|15/5 8 2128 3 2/5 2818/85/18
_ 5 He N dan ZI 66T O6 50 NIE 20/5
ES AdO9 « "DIO HSIN gor | $19943 | 8
X31dNd /LHOS NOILHISNI WOOZ =
C NOTE ) * When pressing Interrupt key twice, interrupt mode is cancelled.
User Preset
H User Preset modes can change the initial copy mode, if necessary.
(See P.40, 41)
U t mod U t mod
select term select tern
1 Paper size [ | 1 Margin reduction default 100% [|
2 Paper size priority Letter [ 2 Sorter mode default Nonsort PO]
3 Margin value default 10 тт [|] 3 Duplex mode default — []=[2][ |]
4 Edge value default 5 mm [ 4 2 in 1 default Reduc. [| |
5 Book value default 20mm [| 5 Auto edge default ом [|
| LejaD >] | | Le ED [>] |
Screen es
No. Modes Function Initial Setting
1. Paper size Sets the paper size of each paper drawer See P.33
(Ledger, Legal, Letter, Letter R or Invoice
size).
2. Paper size priority Specifies the paper size of most frequent Letter
usage.
1/4 3. Margin value default Selects the margin shift value 10 mm
(5 mm, 10 mm, 15 mm or 20 mm).
4. Edge value default Selects the edge width 5 mm
(5 mm, 10 mm, 15 mm or 20 mm).
5. Book value default Selects the book void width 20 mm
(15 mm, 20 mm, 25 mm or 30 mm).
1. Margin reduction Selects the reduction ratio in margin mode | 100%
default (100%, 95%, 93% or 91%).
2. Sorter mode default Determines the most frequent usage mode | None
(None, sort, staple sort or group). (Nonsort)
2/4 | 3. Duplex mode default Determines most frequent usage mode, 775011] =»
(No, [1] =» [2], [2] + [2} or book + [2}). 7742/No
4. 2 in 1 Copy ratio Selects whether to copy full size or Reduction
reduction in the 2 in 1 mode.
5. Auto Edge default Selects whether or not to disable Auto ON
Edge Deletion™,
( NOTE )
* Auto Edge Deletion
To copy from the platen with the original cover or i-ADF open. Normally, this makes a
copy with a solid (black) area around the original if the original is smaller than the
copy paper. This mode eliminates the solid area automatically.
e ltem numbers (1, 2, 3, 4, 5) and (Reserved) are not indicated on the display.
36
U t mod U t mod
cele e o ee ооо
1 Skyshot mode default OFF | |] 1 Po]
2 Manual add toner OFF | |] 2 [|]
3 Departmental counter [|] | 3 [|
4 | 4 С
5 [| 5 Set key operator code [
| Le | (3/4) [=] | | Le) (4/4) [=] |
Screen Modes Function Initial Setting
1. Skyshot mode default Enables or disables the use of skyshot OFF
| mode. | ra
(OFF, M1 ON, M2 ON, M1, M2 ON) a
=
2. Manual add toner Allows the addition of toner as determined | OFF a
by the operator. ©
Select ON, and touch OK on the screen. | =
3. Departmental counter Monitors copy usage of each department. | Consult your
(1) Total copy usage of ail departments. service
3/4 (2) Total copy usage of a specified technician.
department. (Up to 100 departments)
(3) Total copy limit of a specified
department.
(NOTE) Above ¡items (2) and (3) are
required to input the department
code number.
4, Reserved `
5. Reserved
1. Reserved
2. Reserved
4/4 3. Reserved
4. Reserved
5. Set key operator code Inputs key operator code number.
+
37
User Preset
Ш User Preset modes for Key operator.
U set mode User preset mode
select tem " select item
1 Auto reset time 1min |] 1 Special Paper Tray 1 Nome [|
2 Energy saver time 15 min [| | 2 Special Paper Tray 1 None [|
3 Auto off time во тт [|] 3 Interleaving default Blank [|
4 Exposure default Manual [| 4 Page insertion default Blank [|
5 Language default English [| 5 Cover mode default F, blank [|
| Cela +1 Il. || Селе Сы Jj
Screen Modes Function Initial Setting
1. Auto reset time Selects the reset time 1 minute
{None, 45 seconds, 1 minute or 2 minutes).
2. Energy saver time Selects the Energy saver time 15 minutes
(15/30/60 minutes, 1.5/2/3/4 hours).
3. Auto off time Selects the Auto off time 60 minutes or
(No, 30/60 minutes, 1.5/3/4 hours). | 1.5 hours
1/3 (FP-7750)
4. Exposure default Determines whether to use Auto Exposure | Manual
(No, Auto or Manual).
5. Language default Selects the message language of the English
display (English, German, French, Italian,
Spanish, Swedish, Finnish, Dutch,
Portuguese).
1. Special paper tray 1 ' Sets the paper drawer for special (color) None
paper.
2. Special paper tray 2 Sets another paper drawer for special None
(color) paper.
2/3 3. Interleaving default Selects OHP Interleaving paper Blank
(blank or copied).
4. Page insertion default Selects Page Insertion (blank or copied). Blank
5. Cover mode default Selects Cover paper (blank or copied). F, blank
(F, blank/F, copy/FB, blank/FB, copy)
F: Front, FB: Front and back
ATTENTION e The Screens from 1/3 to 3/3 are only available after inputting Key Operator's code
number. |
e ltem numbers (1, 2, 3, 4, 5) and (Reserved) are not indicated on the display.
38
User preset mode
select item
1 SADF default ОБЕ [| |
2 Maximum copy setting off [|
3 M1, Check size 160x70 [TN
4 M2, Check size 220x95 [|
5 Dept. counter mode [| |
| [= |] G3) [= I
Screen Modes Function Initial Setting
1. SADF default Enables or disables the use of SADF OFF
function.
©
2. Maximum copy setting Determines whether to limit number of OFF UN
copies (1-99) or not. >
3. M1, Check size Inputs a size in memory 1 for frequent 160 X 70 mm ут
3/3 usage size. о
=
4. M2, Check size Inputs another size in memory 2 for 220 X 95 mm
frequent usage.
5. Dept. counter mode Checks or changes all or specified Consult your
departments for copy usage, copy limit service
and code numbers, technician.
39
User Preset
№ User Access (1/4 to 4/4 screen)
Example: when changing the duplex mode default to [2] = [2] copy.
User Preset Key
Press User Preset key.
Touch Panel Display
Reset Key
section [OK]
| 1 Paper size ]
| 2 Paper size priority Letter [7]
; 3 Margin value default 10 mm [
| 4 Edge value default 5 mm [
1 5 Book value default 20 тт [|
|
User preset mode
select item
| 1 Margin reduction default 100% | NS >
1
2
3
User preset mode
select item
|
il 3 Duplex mode default
4 2 in 1 default Reduc,
|
i
| 5 Auto edge default on
| 1 Margin reduction default 100% [||
| 2 Sorter mode default ~~ Nonsort [| |
No [net
a
Li
ШИ
| 2 Sorter mode default Nonsort Cr
3 Duplex mode default 2102/ |
4 2 in 1 default Reduc. [ |
5 Auto edge default an [|] |
Le) = |
Ready to copy
BASIC MENU [BEX [SORT [200 TINSERTION]
a 6 |
100%
wl
I DD сео 5
rl = '
| A | [а иент | @ aro] D cank AE
( NOTE )
User preset mode
change selection, press OK
No 1to 2 @
D
Bk to 2
® Use [=] key to step back by one screen at a time.
© To reset the user preset mode, press Reset key.
Input the code number
№ Key Operator Access (1/3 to 3/3 screen)
Example: when changing the Energy saver time to 3 hours.
Press User Preset key.
User preset mode
change selection, press OK
1 Paper size [| 15 min. 30 min. 60 min.
2 Paper size priority Letter [|]
3 Margin value default 10mm [|]
4 Edge value default smm [|
5 Book value default 20 тт [|]
| «= |
1.5 hour 2 hour
el
User preset mode
change selection, press OK
<=
—
. E 4 hour
a
a
BD
Q
=
a
| 5
ib
WN
—
—
5 Set key operator code
2 Energy saver time 3hour [
| 006 | |
3 Auto off time 60 min [|
4 Exposure default Auto |]
5 Language default English f |]
[+ | [=]
Ready to copy
- " DUPLEX | SORT/ [ZOOM [insertion]
1 Auto reset time 1min [|
2 Energy saver time 15 min
3 Auto off time amin [\_
{| 4 Exposure default Auto
2
ЗЕ
И
User preset mode 1
input identification =
1 Auto reset time 1 min NS
=[
í
i
L ; 100%
?
|
ое
5 Language default
==) J 0
[75°] [0von][@ me] [b ome] [ET]
C NOTE ) e Input the key operators code number to No.5 of 4/4 screen first, in order to
see key operator access screens 1/3 - 3/3.
41
Options
E Components
ADF, Automatic Document
Feeder (FA-A505)
® To feed originals automatically.
i-ADF, Inverting Automatic
Document Feeder (FA-A888)
e Tofeed originals automatically.
e For multi-size feeding.
e For duplex copying.
e For 2 in 1 copying.
20 Bin Sorter
(FA-5575/S680/S685/S690)
e To sort, group or non-sort
copies.
® To staple copies.
Ч
nn Y
vr
— (FA-S680/S685/S690)
a =~ a | ® To hole punch copies.
<a DD
(FA-S690)
TS ~~
IS > 3000 Sheet Large Capacity
| Cassette
X See (FA-MA301)
® 3000 sheets
System Console
WM System Console (FA-DS72/DS82)
(FA-DS72 for FP-7735MX) ® To increase paper feed sources
Storage Drawer X 1 and capacity.
Hl System Console (
. _ The paper drawer/tray is
Paper Drawor CE 27750) | designed to accommodate
invoice, letter, letter R, legal
Storage Drawer X 1 and ledger size paper. To
change the paper size, see
Option for system console page 33.
Paper Drawer (FA-MA505)
e 550 sheets
N и
42
i-ADF (FA-A888), ADF (FA-A505)
1. Features
(M Automatic original feeding
® The i-ADF/ADF tray can hold up to 50 originals of 20 Ibs. paper. (30 originals/legal, ledger)
It can accommodate originals from invoice to ledger size.
e Automatic original size detection.
(2) Duplexing (FA-A888)
The i-ADF allows you to perform two different types of duplexing automatically. (See Р.15-17)
@ Multi-size feeding. (FA-A888)
Different size originals to be copied {full size {1:1) or same size.
Не Copies
Originals
Full size Reduction Enlargement
Legal Legal — Letter RInvoice Ledger
Letter R Letter R Letter R/Invoice Ledger
Ledger Ledger Letter R
Letter Letter Letter
(4) 2:1 Copy (FA-A888)
2-sided original to 1-sided copies. (See P.15)
(5) 2 in 1 copy (FA-A888)
To make a 1-sided copy (full size or reduction), from two 1-sided originals side-by-side.
(See P.18)
(6) SADF (Single Automatic Document Feeder) Function
A special original (like thin paper etc.,) can be fed from the ADF/i-ADF original tray and copied
continuously with manual operation.
2. Components
FA-A505 FA-A888
Original Feed Tray Original Feed Tray Original Size Indicator
Original Guides Original Guides
Adjust to width of original. Adjust to width of original.
ATTENTION Inappropriate originals
e Paper with a smooth surface such e Paste-ups
as glossy and coated papers e Pressure sensitive or carbon
e Transparencies backed papers
e Originals with a lead edge that is e Paper with excessive curl
“creased”, “folded”, “punched” or e Stapled originals
“glued”
43
и.
<
LI
©
q
Options
Options
i-ADF (FA-A888), ADF (FA-A505)
3. Usage
IB Procedure
0.000
LI ОР, ;
, l А A 5 j Eu |
Position Select Multi-size 2:1 Copy Numberof Press Print
original feeding (FA-A888) 2:2 Copy copies
2 in 1 copy
(See P.15, 16, 18)
BR Procedure
ADF
1-5 2 34
Position originals Select [S Number of Press Print
one at atime be ec SE copies
Place next original after the last
original is fed into the ADF/i-ADF.
T—l— _l] Ll .—]—l]]]_———_]] TT ————Ñ— —————T——);————— я В пн o; yea y
DUPLEX [SORT — TZ00M/ - INSERTION QUEER TSORT [ZOOM _[INSERTION
1) BASIC MENU (De copy] Pins | Ertrcrs|" 56s (2) BASIC MENU ton a À EFFECTS
= Воск + [2]
Сев SADF
Eco cd Шо СЫ С 1 ' A
{A
[7 © |@ нет] | ® лото] | № DARK | [Е |
ul
C NOTE ) e The SADF function can be combined with 2-page copy and sorter modes (without
staple sort).
e If the next original is not placed within 5 seconds of the completion of the last copy
then SADF function will be canceled.
44
Sorter (FA-S575/5680/S685/5690)
1. Features
[Group |
1 / 2 / 3 / 20 /
[TF =3 43 ==
7— 3
45 :
ary I He Y
No | |
|
Sort |
This figure shows letter size
(20 Ibs.) originals and copies.
20 sets |
4
re
| Staple Sort
Staples sorted sets of up to 50 copies
(FA-S680/S685/S690 and i-ADF).
SUR
| Hole Punch | :
All copies are made with 3-hole (or 2-hole*)
punch {FA-S690 and i-ADF).
SN M
2. Components * See page 19
(FA-5575) (FA-S680/S685/5690)
Manual Staple Key
SS Nonsort tray
> MS ==
a. FE
pty S - RN
ZZ N EP
— S NN
Г | ; |
ZI ` Il
—_— | Г Fo
— 1--
— [TT] -
TT аы Bins
Ny | —
E
T=
)
a ve
© E
Bins Hole Punch Section Stapler Section
C NOTE > When the overflow indicator appears on the display, remove excess
O F copies from the bins, then press SORT/FINISH mode key to reset.
For FA-S680/S685/S690: Remove excess copies from the bin(s).
© |! paper misfeeds or irregular paper alignment occurs in the sorter, turn the paper in
the drawer upside down or replace with a new package of paper.
45
LL
a)
<
LL
a
<
Options
FA-S680
3. Adding staples.
When the staple cartridge is
Add staples empty, indicator flashes. (=>)
[o To hen
— À
=
=)
Nonsert
Sort
E [a [< SELECT
Punch || 187
-
E;
Pull sorter towards the left slowly
until it stops.
(1) Take out empty staple cartridge.
@ Install the new cartridge.
Do not touch or move the staples.
(3) Re-insert sorter.
Check operations.
(1) Place some paper on the nonsort tray.
(2) Press the Manual Staple key several
times until it staples.
Staple Position
C NOTE ) e Order staple cartridges through your servicing dealer.
® When staples are jammed, call service.
46
FA-S685/5690
When the staple cartridge is empty, indicator flashes. (See page 46)
Pull sorter towards the left slowly
until it stops.
©) Turn the stapler handle.
(2) Take out the stapler unit.
La
0e. A" ( Take out empty staple cartridge.
(2) Take out staples if remained in the
stapler.
@ Install the new cartridge.
Do not touch or move the staples.
@ Re-install the stapler unit until it stops.
(2) Re-insert sorter.
o
©
Te
N
ae
u
o
o
у
<T
a
FA-S680
Check operations. (See page 46)
a E GW N
( NOTE ) e Order staple cartridges through your servicing dealer.
® When staples are jammed, call service.
47
Adding Paper (=|)
550 Sheet Paper Drawer/Tray
Pull paper drawer/tray out of
copier.
Do not load ADU with paper.
Place paper into paper
drawer/tray.
Special papers, like glossy paper,
mailing labels and transparencies cannot
be used in the paper drawer/tray. Use
bypass.
Make sure paper is not loaded
above overfill indicator located in
the paper drawer/tray.
Overfill Indicator
р
\ UU Ne
-— Up to 550 sheets,
20 Ibs.
\ 2] Lv
Push paper drawer/tray back into
copier.
ATTENTION ® When the staple sorter is used:
Some paper may not be suitable for stapling. Please consult your service technician if
you are unsure about the type of paper you are using.
C NOTE ) ® The paper drawer/trays are designed to accommodate invoice, letter, letter R, legal
and ledger size paper. To change the paper size, consult your service technician for
proper instructions.
48
3000 Sheet Large Capacity Cassette (LCC)
(1) Open the door.
(2) The paper feed tray will go down.
Do not touch the tray while it is
moving.
Add paper.
After tray stops, place paper neatly on to
tray.
Letter size only (portrait).
fill Indicator Do not fill above red line.
>
> Up to 3000 sheets, 20 Ibs.
Close the door.
49
Adding Toner ((.:./U13)
;—] [—— ——]]————;
Open front panel.
Turn toner hopper assembly.
(1) Turn empty toner bottle until it stops.
(2) Slide empiy toner bottle towards you
and remove.
Shake well before using.
10-15 times until the toner inside is
evenly distributed.
Remove the cap from the bottle.
INewaïoner - и ; i Ÿ Do not turn the shutter.
(1) Insert new toner bottle to the hopper
assembly.
(2) Turn the bottle until it stops, and
arrows are aligned.
O @
VEA» | CA
ad
Return the toner hopper assembly
to original position.
Close front panel.
ATTENTION ® For optimum copy quality use the recommended Panasonic toner. Store toner in a
cool dark place. Do not unseal toner before use. Use it as fast as possible after
unsealing.
50
Replacing the Waste Toner Bottle (I%/U14)
I
Open waste toner bottle cover.
Slowly pull waste toner bottle
straight out.
Do not squeeze the bottle.
Close bottle with cap.
Install new bottle.
Do not insert the bottle from the top.
Close waste toner bottle cover.
ATTENTION ® Do not use toner in waste toner bottle.
C NOTE В e If you have no replacement waste toner bottle, please contact your service
provider.
51
Removing a paper misfeed (8//)
E When paper misfeed has occured, the misfeed indicator and misfeed
position(s) will be indicated on the touch panel display.
[HHH
Paper Misfeed Positions
A: The paper exit area (See P.53)
Copier = Paper transport area (See P.54)
SA or : Paper entry area (See P.54)
System Console LCC, Large Capacity Cassette (See P.56)
D: Automatic Duplex Unit (See P.55)
E: System Console (See P.56)
= ADF : _
> -ADF F: ADF/i-ADF (See P.57—58)
X[] Sorter G: 20 Bin Sorter (See P.59)
No 7
52
Paper exit area
| }
(1) Open front panel. |
(2) Move the sorter to the left if installed.
(See P.46)
(3) Open exit cover.
(D Turn the left paper clearing knob.
(2) Remove misfed paper.
Left Paper Clearing Knob
Caution: this fuser area may be hot.
Caution (1) Open the fuser guide.
heated (2) Check that no misfed paper is
surface = remaining.
(3) Close the fuser guide.
(1) Close exit cover.
(2) Close front panel.
ATTENTION ® The fusing area may be hot, so use caution when removing misfed paper.
e The front panel must be opened prior to opening the exit cover.
53
Removing a paper misfeed (8A/)
Paper transport and paper entry areas
tE JJ
EH
Open front panel.
<< =
== |
Front Panel
(1) Lower lever @.
(2) If copy paper is fed far into the copier,
turn the right paper clearing knob.
(3) Remove misfed paper.
@ Close front panel.
(1) Open entry cover.
(2) Remove misfed paper.
(3) Close the entry cover.
54
Automatic Duplex Unit
Pull out automatic duplex unit.
(1) Open paper guide plate.
(2) Remove misfed paper.
(3) Close paper guide plate.
7 Paper Guide
Plate
If misfeed is too far into the automatic
| | duplex unit: ;
“© | . SZ (D Open paper transport section, until it
stops.
ZZ (2) Remove misfed paper.
DA (3) Close paper transport section.
NE ransport Section
Push back automatic duplex unit.
EEE eN © When the misfeed indicators light at A, C and D, remove misfed paper from
À and C first then remove it in the ADU (D).
55
Removing a paper misfeed (8//)
System console/Large Capacity Cassette
System Console
(M Open the paper feed cover.
(2) Remove misfed paper.
(3) Close the paper feed cover.
Large Capacity Cassette
(1) Hold the latch and slide the large
capacity cassette to the right.
(2) Remove misfed paper.
(M Open the door.
(2) Remove misfed paper.
(3) Close the door.
@ Return the large capacity cassette to
original position.
56
Removing a paper misfeed (=
Entry Area
(1) Open entry cover.
(2 Remove misfed paper.
4 (3) Close entry cover.
q
Oo ve py
Entry Cover
(M) Open the i-ADF.
@ Open entry cover.
(3 Remove misfed paper.
@) Close entry cover and the i-ADF.
Entry Cover
Exit Area
(1) Open the i-ADF.
(2 Remove misfed paper.
If paper is remaining on the platen
glass, remove it.
If paper can not be removed:
@ Close the i-ADF.
(4) Remove misfed paper.
57
Removing a paper misfeed (X=
LE
E
1 Open the ADF.
CZ
!
Entry Area Platen Area Exit Area
Platen Area
(1 Remove misfed paper.
(2) Close the ADF.
Entry Area
(M Push the Release key and remove
_ misfed paper.
@) Close the ADF.
Exit Area
(1) Remove misfed paper.
(2) Close the ADF.
58
Removing a paper misfeed (30)
Pull the sorter toward the left
slowly until it stops.
For FA-S575
(M Open transport cover.
(2) Remove misfed paper.
(3) Close transport cover.
Transport Gaver
me TA
< e
TES Ur
Ce]
For FA-5680/5685/S690
Remove misfed paper.
For FA-S680/S685/S690
(M Open transport cover.
@ Check that paper is removed
completely.
(3) Close transport cover.
Slide the sorter against the copier.
59
Specifications
E FP-7735MX/7742/7750
Type:
Desktop
Process:
UltraMagnefine™ Toner
Multi Copy Speed:
35 letter size copies per minute (FP-7735MX)
42 letter size copies per minute (FP-7742)
50 letter size copies per minute (FP-7750)
Maximum Copy Size:
11” x 17” (Ledger size)
Void Area: max. 5.0 mm |
Copy Size:
Invoice, Letter, Letter R, Legal, Ledger via paper drawer/tray
4” x 6” — 11” x 17” via sheet bypass
Reduction Ratios:
Preset: 50%, 61%, 65%, 77%, 79%
Variable: from 99% to 50% in 1% increments
Enlargement Ratios:
Preset: 121%, 129%, 155%, 200%
Variable: from 101% to 200% in 1% increments
Paper Feed:
550 sheet paper drawer plus 50 sheet Bypass
Automatic Switching
Automatic Duplex Unit holds up to 50 sheets.
Paper Selection:
Automatic
Paper Weight:
16 — 24 Ibs. (15 - 30 lbs. via sheet bypass)
Quantity Selector:
1 — 999, Automatic Repeat, Automatic Reset to 1
Exposure Control:
Automatic/Manual plus Photo Mode
Toner Supply: Automatic
Dimensions: 23.9” (W) x 26.0” (D)x 22.9” (H)
Weight: 150 ibs. (FP-7735MX), 161 Ibs. (FP-7742), 161.5 Ibs. (FP-7750)
Electrical Requirement:
AC 120V, 60Hz, 12A
Bl i-ADF (FA-A888), ADF (FA-A505)
Original Capacity:
30 sheets/leqal, ledger 50 sheets/invoice, letter
Paper Size:
Invoice, Letter, Letter R, Legal, Ledger
Paper Weight:
14 — 28 165.
Electrical Requirement:
Supplied from copier
22.8” (W) x 18.9” (D) x 3.7” (H) without Tray (FA-A505)
Dimensions:
23.6” (W) x 20.4” (D) x 4.7” (H) without Tray (FA-A888)
Weight: 22.0 Ibs. (FA-A505)
26.4 Ibs. (FA-AB88)
Specifications are subject to change without notice.
60
HM 20 Bin Sorter (FA-S575/S680)
FA-S575 FA-S680 (Staple)
Paper Size: Letter/Letter R/Legal/Ledger/Invoice | Letter/Letter R/Legal/Ledger/Invoice
Paper Weight: 16 — 24 65. 16 — 24 Ibs.
Number of Bins: 20 20 Plus stack tray
Bin Capacity:
Nonsort Top bin: 150 sheets Nonsort tray: 100 (75%) sheets
(90 Sheets/ADU) Bins 1-20: 30 sheets
Bins 2-20: 50 sheets (25 Sheets/Ledger)
Staple sort 50 sheets (30 Sheets/Ledger)
(Except Invoice size)
Sort 50 sheets
50 sheets (30 Sheets/Ledger)
Group Top bin: 150 sheets 30 sheets
Bins 2-20: 50 sheets (25 Sheets/Ledger)
Electrical Requirements:
. Supplied from copier
Supplied from copier
Dimensions:
14.2” (W) x 19.2” (D) x 38.4” (H)
20.9” (W) x 22.3” (D) x 38.3" (H)
Weight:
72.6 lbs.
99.0 165.
+ When more than 100 copies are selected,
75 copies are stacked in the Nonsort tray
and the balance in the sort bins.
MB System Console (FA-DS72/DS82)
Combination: 550 Sheet Paper Drawer x 1 (DS82)
Storage Drawer x 1
Paper Size: Invoice, Letter, Letter R, Legal, Ledger
Paper Weight: 16 — 24 Ibs.
Electrical Requirements:
Supplied from copier
Dimensions:
23.9” (W) x 25.0” (D) x 16.4” (H)
Weight:
47.7 Ibs. (DS72)/58.7 Ibs. (DS82)
Ш Large Capacity Cassette (FA-MA301)
Paper Size: Letter
Paper Weight: 16 — 24 lbs.
Paper Capacity: Maximum 3000 sheets, 20 Ibs.
Electrical Requirements:
Supplied from system console
Dimensions:
11.4” (W) x 17.5” (D) x 20.4” (H)
Weight:
30.8 lbs.
Specifications are subject to change without notice.
61
7
=
Le,
=
O
=
O
D
en
0
Troubleshooting
u Check ) | Action )
Unit does not operate ``
Check if the Power Switch is turned on
and if the power plug is inserted into the
outlet.
Does the display light?
(See P.8)
Does the Energy saver key flash (or light)
and displays are turned OFF?
(See P.8)
Press Energy saver key on control panel.
Do any of UDO codes and messages
appear on display?
(UO, U4, U10, U14....etc.,)
Perform actions in accordance with each
message.
Remove copies from the sorter bin(s),
and press the sorter mode select keys.
For FA-S680/S685/S696
Remove copies from the sorter bin(s).
(See P.45)
Do the over flow indicator and message
appear on display? ([oF])
(See P.45)
Do the add staples indicator and
message appear on display? (==)
(See P.46)
If staples are not empty, call service.
(Staples are jammed.)
Do the add paper indicator and message
appear on display? (|=)
(See P.48-49)
Add paper. (See P.48—49)
Do paper misfeed indicator and message
appear on display? (8\/)
(See P.52—59)
Remove misfed paper. (See P.52-59)
Do any of EO-00 indicator and message
appear on display?
(See P.8-9)
Turn copier off, then on. If error code
does not go off, call service.
3 48 3 38 Y 4 3 38
62
u Check | ( Action |
Copies are light ™
Does the exposure indicator say “light”? Touch the “dark” key or touch the “Auto”
(See P.11) key to choose the auto mode. (See P.11)
Do the add toner indicator and message
appear on displays? (See P.50) = Add toner. (See P.50)
\
Copies are marked ™
s ne copier platen glass or platen cover = Clean it. (See below)
N _/
№ if the measures outlined above do not solve the problem, call Service.
(M Care of Copier | В
As a rule, clean weekly.
Platen/Platen Cover
(1) Wipe marks off with cloth and
neutral detergent.
(2) Wipe again with dry cloth.
Platen Cover
Platen
63
O)
=
=
Le,
e,
Ss
RN
к.
ко
=
=
|
pu
Specifications (continued from page 61)
Hl 20 Bin Sorter (FA-5685/S690)
FA-S685 FA-S690
Paper Size: Invoice — Ledger
Paper Weight: 16 — 24 Ibs.
Number of Bins: 20
Bin Capacity:
Nonsort Nonsort tray: 100 (50%) sheets
Bins 1-20: 30 sheets
(25 Sheets/Ledger)
Staple sort 50 sheets (30 Sheets/Ledger)
(Except Invoice Size)
Sort 50 sheets (30 Sheets/Ledger)
Group 30 sheets (25 Sheets/Ledger)
Hole Punch According to selected sorter mode
(Nonsort, Staple Sort, Sort or Group)
Electrical Requirements:
Supplied from copier
Dimensions:
20.9” (W) x 22.3” (D) x 38.3” (Н)
23.77 (W) x 22.3” (D) x 38.3" (H)
Weight:
92 lbs.
103 Ibs.
U.S.A. only
* When more than 100 copies are selected, 50 copies are stacked in the
Nonsort tray and the balance in the sort bins.
—
WARRANTY
N
For Service Call:
“PANASONIC OFFICE PRODUCTS COMPANY MAKES NO WARRANTIES, GUARANTEES OR
REPRESENTATIONS, EXPRESSED OR IMPLIED, TO CUSTOMER WITH RESPECT TO THIS
PANASONIC COPIER, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
PANASONIC OFFICE PRODUCTS COMPANY ASSUMES NO RISK AND SHALL NOT BE
SUBJECT TO LIABILITY FOR ANY DAMAGE, INCLUDING, BUT NOT LIMITED TO DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS OF PROFITS
SUSTAINED BY THE CUSTOMER IN CONNECTION WITH THE USE OR APPLICATION OF THIS
PANASONIC COPIER. SEE YOUR DEALER FOR DETAILS OF DEALER'S WARRANTY.”
Panasonic Office Products Company
A unit of Matsushita Electric Corporation of America
Plain Paper Copier Division
Two Panasonic Way, Secaucus, N.J.
Panasonic Canada Incorporation
Ontario LAW 2T3
07094
5770 Ambler Drive, Mississauga,
FFPTD0846B Printed in Japan
February 1998
50298-1038
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project