Timex T618TT Clock Radio

Add to my manuals
20 Pages

advertisement

Timex T618TT Clock Radio | Manualzz
Model T618
Stereo CD Clock Radio
with Digital Tuning
and Nature Sounds
For additional information, online registration,
and exclusive special offers visit our website:
www.sdidirect.com
For questions or comments regarding this or other products,
please call our toll-free number 1-800-888-4491.
Para instruccionese en Espanol, llame al 1-800-888-4491.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
OR BACK OF UNIT. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
The lightning flash with arrowhead in an equilateral triangle is intended to alert
the user of the presence of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user
of the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
The symbols above are located at the bottom of the cabinet.
CAUTION: To prevent electric shock, do not use this polarized plug with an extension
cord receptacle or other outlets unless the blades can be fully inserted to prevent
blade exposure.
ATTENTION: Pour prévenir les chocs électriques ne pas utiliser cette fiche polarisée
avec un prolongateur. Une prise de courant, ou une autre sortie de courant sauf si
les lames peuvent étre insérées à fond sans en laisser aucune partie à decouvert.
Note: The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such modification
could void the user’s authority to operate the equipment.
Table of Contents
A Consumer Guide to Product Safety ............................................................................................................................4-6
Safety Instructions
FCC Information
Laser Safety
Installation and Maintenance ................................................................................................................................................................7
Installation
“Sure Alarm” Battery Backup Installation
Maintenance
Controls and Indicators ...........................................................................................................................................8
Clock Display with Indicators ...........................................................................................................................................9
Setting the Time and Date ...........................................................................................................................................................10
Listening to Compact Discs..........................................................................................................................................10-11
Playing Compact Discs
Using the Repeat Functions
Using the Random Functions
Performing a High-Speed Music Search
Activating the Bass Boost Feature
Listening to the Radio .......................................................................................................................................................................12
Operating the Radio
Programming Radio Station Settings
Antenna Information and Adjustment
Last Station memory
Operating the Alarms .................................................................................................................................................13-14
Setting Alarm-1 for CD Track or Beeping Alarm Sound
Setting Alarm-2 Time for AM/FM Radio
Setting Alarm-3 Time for Nature Sounds
Checking Your Alarm Time Settings
Turning Off the Alarms
Sleeping to Compact Discs......................................................................................................................................................................15
Sleeping to Radio with Timer.........................................................................................................................................................15
Sleeping to Nature Sounds with Timer ...............................................................................................................................................16
Adjusting the Display Brightness ...............................................................................................................................................16
Stereo Headphone Jack ...........................................................................................................................................................................16
Troubleshooting ........................................................................................................................................................... 17-18
Warranty Information ...........................................................................................................................................................20
A Consumer Guide to Product Safety
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and manufactured to ensure your personal
safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and
operating instructions carefully before installation and use, and keep these instructions handy for future reference.
Take special note of all warnings listed in these instructions and on the unit.
1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl,
kitchen sink, laundry tub, swimming pool or in a wet basement.
2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper
ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block
ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet,
that may impede the flow of air through the ventilation openings.
3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other
appliances (including amplifiers) that produce heat.
4. Power Sources – The unit should be connected to a power supply only of the type described in the
operating instructions or as marked on the appliance.
5. Grounding or Polarization – This product is equipped with a polarized alternating-current line plug (a
plug having one blade wider than the other). As a safety feature this plug will fit into the power outlet only
one way. If you are unable to fit the plug into the outlet, try reversing the plug. If the plug still fails to fit,
contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of your polarized
plug by forcing the plug into the outlet.
6. Power Cord Protection – Power supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them. It is always best to have a clear area from where the
cord exits the unit to where it is plugged into an AC outlet.
7. Cleaning – The unit should be cleaned only as recommended by the manufacturer. See the Maintenance
section of this manual for cleaning instructions.
4
A Consumer Guide to Product Safety
8. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled
into any openings or vents located on the product.
9. Attachments – Do not use attachments not recommended by the product manufacturer.
10. Lightning and Power Surge Protection – Unplug the unit from the wall outlet and disconnect the
antenna or cable system during a lightning storm or when it is left unattended and unused for long
periods of time. This will prevent damage to the product due to lightning and power-line surges.
11. Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this
can result in a risk of fire or electric shock.
12. Damage Requiring Service – The unit should be serviced by qualified service personnel when:
A. the power supply cord or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.
13. Antenna – Do not connect an external antenna to the unit.
14. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or
longer, the power cord should be unplugged from the unit to prevent damage or corrosion.
15. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s
operating instructions. Service methods not covered in the operating instructions should be referred to
qualified service personnel.
For questions or comments regarding this or other
products, please call our toll-free number: 1-800-888-4491.
5
A Consumer Guide to Product Safety
FCC Information
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules. These
limits provide reasonable protection against radio and TV interference in a residential area.
However, your equipment might cause TV or radio interference even when it is operating properly. To eliminate
interference you can try one or more of the following corrective measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the radio or TV.
• Use outlets on different electrical circuits for the equipment and the radio or TV.
Consult your dealer or an experienced radio/television technician if the problem still exists.
Modifying or tampering with your system’s internal components can cause a malfunction and might invalidate
the system’s warranty and void your FCC authorization to operate it. If your system is not performing as it should,
call SDI Technologies Inc., Timex Audio Products Consumer Services, 1-800-888-4491 for assistance.
Laser Safety
This unit employs a laser. Only a qualified person should remove the cover or attempt to service this device,
because of possible eye injury.
CAUTION: USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DANGER: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED, AVOID
DIRECT EXPOSURE TO BEAM.
CAUTION: HAZARDOUS LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.
6
Installation and Maintenance
Installation
1. Remove unit and all packing materials from the carton. You should save packing materials in case unit needs
to be returned for service. If you do not wish to save the materials, please dispose of them properly.
2. Place the unit on a stable, level surface, close to an AC outlet, out of direct sunlight, and away from sources
of dust, dirt, heat, water, moisture, vibration, and strong magnetic fields.
3. After installing the backup (see below) and reading the Maintenance notes, plug the AC cord into an outlet.
“Sure Alarm” Battery Backup Installation
It is strongly recommended that 3 “AAA” batteries be installed into the unit, as directed below, in order to activate
the “Sure Alarm” Battery Backup. In the event that the power cord is disconnected or a power interruption
occurs, the “Sure Alarm” Battery Backup will maintain clock and alarm settings for the life of the battery, ensuring
that the alarm (buzzer only) will sound at the set time. Note: the backlight will not function while on battery power.
1. Gently turn the unit over and remove the battery compartment door.
2. Install 3 "AAA" batteries (alkaline is recommended for longer life), while
making sure that the + and – ends match up with those inside the battery
compartment.
3. Slide the battery compartment door back on, making sure the door locks
into place, and gently turn the unit over.
The display’s Battery Low Indicator will flash when no batteries are installed,
or when the batteries are weak or installed incorrectly.
Battery Compartment
Maintenance
1. Place the unit on a level surface away from direct sunlight or sources of excessive heat.
2. Protect your furniture when placing the unit on natural wood or wood with a lacquered finish. A cloth or other
protective material should be placed between the unit and the furniture.
3. Clean the casing with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such
as thinner or similar materials, are not recommended as they may damage the surface of the case.
4. If the unit is not to be used for a prolonged period, remove the batteries to prevent possible corrosion. Should
the compartment become corroded or dirty, clean the compartment thoroughly and replace the batteries.
7
Controls and Indicators
Radio Button CD Play/Pause Button
RADIO
CD
SOUNDS
ON / SLEEP
Sound Button Volume Buttons EXB
SNOOZE / NIGHT LIGHT
VOLUME
OFF/RESET
EXB (Bass Boost) Button
Off/Reset Button
OPEN DOOR
CD Open Door Button
Time Set Button Date Set / 7-5-2 Button Sleep Volume Button Snooze/Night-Light Button
Alarm-1 Button
TIME SET
ALARM 1
DATE SET
ALARM 2
SLEEP VOL.
ALARM 3
CD MODE
WAKE TRACK
CD Mode Button TUNING
Alarm-3 Button
Wake Track Button
TUNING
>>
>>
ENTER
FWD
REV
BAND
Alarm-2 Button
1
2
3
Reverse/Tuning Button AM/FM Band Button 4
5
6
Forward/Tuning Button
Enter Button
Memory Set 1-6 Buttons 8
LCD Display With Indicators
Alarm-2 (Radio) Indicator
Alarm-1 (CD/Buzz) Indicator
7-5-2 Alarm Settings
CD/BUZZ
EVERYDAY
RADIO
MON-FRI
Alarm-3 (Sounds) Indicator
SOUNDS
SAT-SUN
7-5-2 Alarm Settings
Battery Low Indicator
CD Play/Pause
Indicators
Wake Track Indicator
Repeat Indicators
PM Indicator
DATE
WAKE
TRACK
REPEAT ALL SLEEP
RANDOM
EXB
YEAR
AM
FM1
FM2
AM/FM1/FM2 Indicator
Random Indicator
Pause Indicator
Bass Boost Indicator
Sleep Volume Indicator
9
Radio Frequency /
CD Track /
Calendar Display /
Nature Sounds Indicator
Setting the Time and Date
Setting the Clock
1. Press and hold the Time Set Button until the date disappears and the display begins flashing.
2. Press the Reverse or Forward Button to set the time. Holding a button for a few seconds will
advance or reverse the time rapidly. Set the correct AM/PM time, shown by the PM Indicator on the display.
3. After setting the time, press the Enter Button or wait ten seconds to return the display to the normal
display mode. The calendar will appear and the unit will beep twice.
Setting the Calendar
1. It is important to set the correct date in order to use the 7-5-2 Alarm. Press and hold the Date Set /
7-5-2 Button until the display flashes and the year replaces the month/day at the bottom of the display.
2. Press the Reverse or Forward Button to set the correct year, and then press the Enter Button.
The unit will beep and the display will show the month and day. Again, press the Reverse and Forward Buttons to set the current date.
3. After setting the date, press the Enter Button or wait ten seconds to return to the normal display mode.
Listening to Compact Discs
Playing Compact Discs
ATTENTION: Due to the condition of the recording or differences in recording platforms, this
unit may not be able to play some CD-R or CD-RW discs.
1. Press the Open Door Button and place a CD on the spindle with the printed side facing out, then gently
close the CD Player door.
2. Press the CD Play/Pause Button once. The display will show “On” before returning to the clock display.
The first track will start playing, and the bottom of the display will show the CD Track Indicator.
3. Adjust the volume using the Volume Buttons.
4. To pause the CD, press the CD Play/Pause Button while the CD is playing. The display will show the
Pause Indicator (//). Press the CD Play/Pause Button again to continue play.
5. Press the Forward Button to skip to the next track. Press the Reverse Button to return to the
beginning of the current track. Press the Reverse Button again to skip to the previous track.
6. To stop play before the CD has ended, press the Off/Reset Button.
10
Listening to Compact Discs (Continued)
Using the Repeat Functions
1. Press the CD Mode Button once to repeat the track that is currently playing. The Repeat Indicator
will appear on the display, indicating that this function has been activated.
2. Press the CD Mode Button again to repeat the entire CD. The Repeat All Indicator will appear,
indicating that this function has been activated. When the CD is finished, it will start over from the beginning.
3. When a repeat function is activated, the CD will play until the CD is stopped or the function is cancelled.
To cancel the repeat functions, press the CD Mode Button until no Repeat indicators appear on
the display.
Using the Random Functions
1. To play CD tracks in a random order, press the CD Mode Button until the Random Indicator appears
on the display. This can only be done while a CD is playing. All of the tracks on the CD will play once, in a
random order. After all the tracks have played, the CD will shut off.
2. To combine the Random and the Repeat All functions, press the CD Mode Button again so that the
display shows the Repeat Random Indicator. The CD Player will now continue to play tracks in a random
order until the CD Player or the function is turned off.
3. To cancel the random functions, press the CD Mode Button until no Random indicators appear on
the display.
Performing a High-Speed Music Search
Press and hold the Reverse or Forward Button to search for specific musical passages within a track.
When you find the passage you are searching for, release the button. The high-speed search can only be
performed while the track is playing.
Activating the Bass Boost Feature
To enhance the bass sound of your music, press the EXB Button so that the EXB Indicator appears on
the display. This can only be done while a CD is playing. To turn off this feature, press the EXB Button
again so that the EXB Indicator no longer appears on the display.
11
Listening to the Radio
Operating the Radio
1. Press the Radio Button once to turn on the radio. The display will show “On” before returning to the
clock display. The bottom of the display will show the digital radio frequency.
Note: If the Radio Button is pressed more than once, the unit will enter the sleep mode, with the radio
operating on a timer. See Sleeping to Radio with Timer for more information about this feature.
2. Press the Band Button to select a radio band. There are two different FM bands (to be used when
programming preset radio station settings) and one AM band.
3. Press the Reverse/Tuning or Forward/Tuning Button to find a station to listen to. To scan the
radio stations, hold a button for about three seconds. The radio will rapidly advance to the next strong signal.
4. You may also use the Radio Memory Set Buttons to select a preset radio station. See the Programming
Radio Station Memories section for instructions on programming radio station settings.
5. Adjust the volume using the Volume Buttons.
6. Press the Off/Reset Button to turn the radio off. The bottom of the display will show the calendar setting.
Programming Radio Station Settings
The radio features 18 programmable radio station settings so you can access your favorite stations quickly.
1. Tune to the first station you wish to program into your preset station settings.
2. Press and hold one of the six Radio Memory Set Buttons to program the station into that memory
slot. When the unit beeps, the station setting has been saved.
3. Continue programming a total of 18 stations into memory: six each into the two FM bands and six into the
AM band. To edit a setting, simply program a new frequency into the memory slot.
Antenna Information and Adjustment
FM – Extend the FM wire antenna to its full length and vary the direction to its strongest signal.
AM – The AM bar antenna is located inside the cabinet. Rotate the unit until you find the strongest AM signal.
Last Station Memory
The tuner always remembers the last station selected before the radio was switched off, and automatically selects
the station again when the radio is turned on.
12
Operating the Alarms
This clock radio features a triple alarm system, with three alarms that can be operated independently. Alarm-1
features a choice of a CD tracks or a beeping alarm sound, Alarm-2 features a radio alarm wake sound, and
Alarm-3 features a nature wake sound. You can set any combination of the three alarms. In addition, each
alarm features a 7-5-2 setting that lets you set the alarm in advance for a full week, the workweek, or the weekend.
Setting Alarm-1 for CD Track or Beeping Alarm Sound
1. Press and hold the Alarm-1 Button until the Alarm-1 settings and Wake Track Indicator appear on
the flashing display. The display will flash for ten seconds before returning to the standard clock display.
2. Press the Reverse or Forward Button to set the Alarm-1 time. Holding a button for a few seconds
will advance or reverse the time rapidly. Be sure to set the correct AM/PM time, as shown by the PM
Indicator on the display.
3. After setting the Alarm-1 time, insert a CD into the CD Player and use the Wake Track Button to select
the track that will play at the set time. To wake to a beeping alarm sound, leave the CD Player empty. Adjust
the volume using the Volume Buttons.
4. After setting the wake time and sound, you will need to select your 7-5-2 setting. The 7-5-2 setting lets you
set the alarm for a full week, weekdays only, or the weekend. Before setting the alarm, be sure that you have
set the correct date, as shown in the Setting the Calendar section of this manual. While the display is still
flashing, press the Date Set/7-5-2 Button until the desired setting is shown at the top of the display.
5. After you have programmed the Alarm-1 settings, press the Enter Button or wait ten seconds to return
to the clock display. The Alarm-1 Indicator will appear on the display, showing that the alarm is set.
Setting Alarm-2 for AM/FM Radio
1. Press and hold the Alarm-2 Button until the Alarm-2 settings and radio frequency appear on the display.
2. Press the Reverse or Forward Button to set the Alarm-2 time.
3. Use the Band Button and the Memory Set Buttons to select a radio station to wake to. For more
information on programming radio stations into memory, see the Programming Radio Station Settings section
of this manual. Adjust the volume using the Volume Buttons.
4. See Note #4 in the previous section for instructions on setting the 7-5-2 alarm setting for Alarm-2.
5. After you have programmed the Alarm-2 settings, press the Enter Button or wait ten seconds to return
to the clock display. The Alarm-2 Indicator will appear on the display, showing that the alarm is set.
13
Operating the Alarms (Continued)
Setting Alarm-3 for Nature Sounds
1. Press and hold the Alarm-3 Button until the Alarm-3 settings and Nature Sounds Indicator appear
on the display.
2. Press the Reverse or Forward Button to set the Alarm-3 time.
3. Use the Sound Button to select a nature sound to wake to. There is a choice of four sounds:
Sound #1: Ocean Surf
Sound #2: Forest Spring
Sound #3: Rushing Brook
Sound #4: Summer Wind
4. See Note #4 in the Setting Alarm-1 section for instructions on setting the 7-5-2 alarm setting for Alarm-2.
5. After you have programmed the Alarm-3 settings, press the Enter Button or wait ten seconds to return
to the clock display. The Alarm-3 Indicator will appear on the display, showing that the alarm is set.
Checking Your Alarm Time Settings
To check any of your alarm settings after you’ve set the alarm, press any Alarm Button twice so that the
settings appear on the display. The display will return to the standard clock display after a few seconds.
After you have checked the settings, be sure that the Alarm Indicator still appears on the display in order so
that the alarm will sound at the set time.
Turning Off the Alarms
1. After the alarm sounds, press the Alarm Off/Reset Button to turn off the alarm while still maintaining
the programmed 7-5-2 alarm settings. To turn off an alarm and cancel its 7-5-2 settings, press its Alarm
Button so that its Alarm Indicator no longer appears on the display.
2. If it is not turned off, the alarm will sound for an hour before stopping. As long as an Alarm Indicator
appears on the display, the alarm will sound at the set time, according to the 7-5-2 settings.
3. To activate the snooze feature, press the Snooze/Night-Light Bar when the alarm sounds. The alarm
will shut off for approximately nine minutes before sounding again. The feature can be repeated several times
during the one-hour snooze cycle.
14
Sleeping to Compact Discs
Note: For more information about playing CD’s, see the Listening to Compact Discs section of this manual.
1. Press the CD Play/Pause Button to begin playing the CD. Without any interference, the disc will play
all the way through until the end, then automatically shut off.
2. You can adjust the volume to a comfortable level using the Volume Buttons.
Note: If you use the Volume Buttons to adjust the sleep volume, this affects the volume level of the alarm.
3. To turn the CD off before the disc has finished playing, press the Alarm Off/Reset Button.
Sleeping to Radio with Timer
Note: For more information about playing the radio, see the Listening to the Radio section of this manual.
1. Press the Radio Button twice to enter the sleep mode. This sets the radio sleep timer to the 90-minute
setting. The sleep timer setting remains active for approximately ten seconds before returning to the standard
display. The Sleep Indicator will be visible in the LCD display.
2. Continue pressing the Radio Button to select a 90-, 60-, 30-, or 15-minute sleep timer.
3. Use the instructions in the Listening to the Radio section to select a radio station.
4. Press the Sleep Volume Button to find a comfortable sleep volume level. The Sleep Volume Indicator
on the display shows the sleep volume level. Adjusting the sleep volume will not affect the alarm volume.
5. Press the Off/Alarm Reset Button to turn off the radio before the sleep time has elapsed.
Note: To see the number of minutes remaining on the sleep timer, press the Radio Button once. The
display will show the sleep time for approximately ten seconds before returning to the normal mode.
15
Sleeping to Nature Sounds with Timer
1. Press the Sound Button twice to enter the sleep mode. This sets the sleep timer to the 90-minute
setting. The sleep timer setting remains active for approximately ten seconds before returning to the standard
display. The Sleep Indicator will be visible in the LCD display.
2. Continue pressing the Sound Button to select a 90-, 60-, 30-, or 15-minute sleep timer.
3. Press the Reverse or Forward Button to choose from the four nature sounds.
4. Press the Sleep Volume Button to find a comfortable sleep volume level. The Sleep Volume Indicator
on the display shows the sleep volume level. Adjusting the sleep volume will not affect the alarm volume.
5. Press the Off/Alarm Reset Button to turn off the nature sounds before the sleep time has elapsed.
Note: To see the number of minutes remaining on the sleep timer, press the Sound Button once. The
display will show the Sleep Time for approximately ten seconds before returning to the normal mode.
Adjusting the Display Brightness
This alarm clock radio features an adjustable display backlight, with dim, medium, and bright settings. To select
a backlight setting, press the Night-Light/Snooze Bar until the desired brightness is reached.
Stereo Headphone Jack
Connect a pair of headphones (not included) to the Headphones Jack on the back of the unit for private
listening. The built-in speakers will not operate while the headphones are connected.
Important!
You must disconnect the headphones from the Headphones Jack before you go to sleep or you will not hear
any sounds emit from the built-in speakers at the wake time.
16
Troubleshooting
PROBLEM
The alarm does not sound
POSSIBLE CAUSE
REMEDY
• The alarm was not set correctly for AM/PM
• Alarm icons are not on the display
• Check the alarm time setting
• Press one of the Alarm Buttons so that
its Indicator appears on the display
• Check and reprogram settings
• Date or 7-5-2 settings programmed
incorrectly
The alarm sounds at an incorrect time
• The wrong alarm icon was on the display
• The alarm was not set correctly for AM/PM
Buzzer alarm is heard when waking to CD
• A CD was not inserted into the CD player
• The CD was inserted incorrectly into the
player
• The CD Player door is not closed
• There was a power failure
• Make sure the alarm you wish to wake to
is the only Alarm icon that appears on the
display
• When waking to CD, always make sure a
CD has been inserted
• Always insert the CD with the label surface
facing out
• Push the door gently until it is completely
closed
• All alarms default to buzzer during a power
failure as long as working batteries are
inserted correctly inside the battery
compartment
There is no display and the CD/radio will
not play
• The unit is disconnected from an AC outlet
• The AC outlet has no power
• The AC outlet is controlled by a wall switch
that is off
• Connect to an AC outlet
• Try the unit on another outlet
• Do not use an outlet that is controlled by
a wall switch
CD skips while playing
• Dirty or defective disc
• Check the bottom of the disc and clean
if necessary with a soft cleaning cloth,
always wipe from the center out
• Clean with a commercial lens cleaner
• Dirty lens
If you have any questions, call SDI Technologies Inc. Timex Audio Products Division Customer Service, 1-800-888-4491.
17
Troubleshooting
PROBLEM
POSSIBLE CAUSE
REMEDY
Poor FM reception on certain stations
• Weak or distant station
• Try adjusting the direction of the FM wire
antenna
Poor AM reception on certain stations
• Weak or distant station
• Rotate the unit to try and gain better
reception
Unit is on but there is low volume or no
volume at all
• Main volume has been turned all the way
down
• Headphones are connected to Headphone
Jack
• Raise the volume with the volume dial
Unit shuts off unexpectedly
• Unit was in the Sleep Mode instead of
Power On Mode
• The unit was turned On by the alarm and
the alarm time ended
• Press the Radio On Button once to turn
the unit back on
Cannot set the clock or alarm time
• The display must be flashing in order to
set the clock/alarm times
• Hold the Time Set Button or one of the
Alarm Set Buttons until the display flashes
• Disconnect the headphones
If you have any questions, call SDI Technologies Inc. Timex Audio Products Division Customer Service, 1-800-888-4491.
18
For additional information, online registration,
and exclusive special offers visit our website:
www.sdidirect.com
For questions or comments regarding this or other products,
please call our toll-free number 1-800-888-4491.
Para instruccionese en Espanol, llame al 1-800-888-4491.
Limited 90-Day Warranty Information
Timex Audio Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product
to be free from defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date
of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period,
SDI Technologies will repair or, at its discretion, replace this product without charge (except for a $10.00 charge for handling,
packing, return UPS/postage, and insurance). This decision is subject to verification of the defect or malfunction upon delivery
of this product to the Factory Service Center listed below. The product must include proof of purchase, including date of
purchase. The fee for service after the warranty period or without proof of purchase is $30.00.
Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or
defective batteries are the most common cause of problems encountered.
If service is still required:
1. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box.
2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if within the warranty
period.
3. Enclose a check or money order payable to the order of SDI Technologies, for the sum of $10.00 ($30.00 after warranty period).
4. Send the unit prepaid and insured, to the Factory Service Center listed below.
Consumer Repair Department
SDI Technologies Inc.
Timex Audio Products Division
1401 Pullman Drive, Suite A
El Paso, TX 79936-7726
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products
which have been damaged by negligence, misuse or accident, or which have been modified or repaired by unauthorized
persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to CD’s or tape cassettes (if
applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the product subsequent to the
original purchaser. Any applicable implied warranties are also limited to 90 days, and SDI Technologies will not be liable for
consequential damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages,
so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
For questions or comments regarding this or other products, please call our toll-free number 1-800-888-4491.
TIMEX is a registered trademark of Timex Corporation in the U.S. and other countries.
T618IB-052102-08
Printed in China

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Questions and Answers

What is the procedure to adjust display brightness?
Unfortunately, the provided context does not contain information about how to adjust display brightness.
How do I set an alarm for a CD track or a beeping sound?
To set Alarm-1 for a CD track or a beeping sound, press the ALARM 1 button, then use the HOUR and MINUTE buttons to set the desired time. Next, press the CD button to select the CD track or the ALARM BEEP button to choose the beeping alarm sound. Finally, press the ALARM 1 button again to confirm your settings.
How can I verify my alarm time settings?
To check your alarm time settings, press the ALARM 1, ALARM 2, or ALARM 3 button to view the corresponding alarm time.
Is it possible to fall asleep while listening to compact discs?
Yes, it is possible to fall asleep while listening to compact discs. Press the SLEEP button repeatedly to select the desired sleep time duration, and the CD player will automatically turn off when the time expires.
How do I make the radio turn off automatically after a certain period of time?
To set a sleep timer for the radio, press the SLEEP button repeatedly to select the desired sleep time duration. The radio will automatically turn off when the time expires.

Related manuals

Download PDF

advertisement