Toshiba SD-5980 DVD Player

Toshiba SD-5980 DVD Player
DIGITAL VIDEO
DVD/CD PLAYER
SD-5980SU
OWNER’S MANUAL
© 2005 Toshiba Corporation
Before operating the unit, please read this manual thoroughly.
2F60201A [E] COVER
1
2/22/05, 10:47 AM
SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
WARNING:
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the appliance.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE.
DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rule. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
WARNING:
Changes or modifications made to this equipment, not expressly approved by Toshiba, or parties
authorized by Toshiba, could void the user’s authority to operate the equipment.
CAUTION:
Servicing instructions are for use by qualified service personnel only. To reduce the risk of electric
shock do not perform any servicing other than that contained in the operating instructions unless you
are qualified to do so.
CAUTION:
THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.
TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS USER'S GUIDE CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE,
CONTACT AN AUTHORIZED SERVICE LOCATION.
USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE.
VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO NOT
STARE INTO BEAM.
Location of the required Marking
The rating sheet and the safety caution are on the
rear of the unit.
CERTIFICATION: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR
SUBCHAPTER J.
In the spaces provided below, record the Model and Serial No. located on the rear panel of your DVD video player.
Model No.
Serial No.
Retain this information for future reference.
2
2F60201A [E] P02-05
2
2/22/05, 10:47 AM
IMPORTANT SAFEGUARDS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS PROVIDED IN THIS
OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR
FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following
procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that
can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1.
2.
3.
4.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
3
2F60201A [E] P02-05
3
2/22/05, 10:47 AM
IMPORTANT SAFEGUARDS
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12.Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
S3125A
13. Unplug this apparatus during lightning storms or when unused for long periods
of time.
14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. When you use headphones on the amplifier, keep the volume at a moderate
level. If you use the headphones continuously with high volume sound, it may
cause hearing damage.
4
2F60201A [E] P02-05
4
2/22/05, 10:47 AM
IMPORTANT SAFEGUARDS
16. Do not overload wall outlets; extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
17. Never insert objects of any kind into this apparatus through openings as they
may touch dangerous voltage points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any kind on the apparatus.
18. Keep your fingers well clear of the disc tray as it is closing. Neglecting to do
so may cause serious personal injury.
19. Do not place a heavy object on or step on the apparatus. The object may fall,
causing serious personal injury and serious damage to the apparatus.
20. Do not use a cracked, deformed, or repaired disc. These discs are easily
broken and may cause serious personal injury and apparatus malfunction.
5
2F60201A [E] P02-05
5
2/22/05, 10:47 AM
Introduction
Precautions
Notes on handling
When shipping the DVD video player, the original
shipping carton and packing materials come in handy.
For maximum protection, repack the unit as it was
originally packed at the factory.
Do not use volatile liquids, such as insect spray, near
the DVD video player. Do not leave rubber or plastic
products to contact the DVD video player for prolonged
period. They will leave marks on the finish.
The top and rear panels of the DVD video player may
become warm after a long period of use. This is not a
malfunction.
When the DVD video player is not in use, be sure to
remove the disc and turn off the power.
If you do not use the DVD video player for a long
period, the unit may not function properly in the
future. Turn on and use the DVD video player
occasionally.
Notes on locating
Place the DVD video player on a level surface. Do not
use it on a shaky or unstable surface such as a
wobbling table or inclined stand. The loaded disc may
become disaligned and damage the DVD video
player.
When you place this DVD video player near a TV,
radio, or VCR, the playback picture may become poor
and the sound may be distorted. In this case, place
the DVD video player away from the TV, radio, or
VCR.
Notes on moisture condensation
Moisture condensation damages the DVD video
player. Please read the following carefully.
Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day. Drops of
water form on the outside of the glass. In the same way,
moisture may condense on the optical pick-up lens
inside this unit, one of the most crucial internal parts of
the DVD video player.
le of mo
Examp ensat isture
ion!
cond
Optical pick-up
lens
Moisture condensation occurs during the following
cases.
When you bring the DVD video player directly from a
cold place to a warm place.
When you use the DVD video player in a room where
you just turned on the heater, or a place where the
cold wind from the air conditioner directly hits the unit.
In summer, when you use the DVD video player in a
hot and humid place just after you move the unit from
an air conditioned room.
When you use the DVD video player in a humid place.
It’s too
warm!
Notes on cleaning
Use a soft, dry cloth for cleaning.
Use a dry cloth to wipe it dry.
Do not use any type of solvent, such as thinner and
benzine, as they may damage the surface of the DVD
video player.
If you use a chemical saturated cloth to clean the unit,
follow that product’s instructions.
Do not use the DVD video player when moisture
condensation may occur.
If you use the DVD video player in such a situation, it
may damage discs and internal parts. Remove the
disc, connect the power cord of the DVD video player
to the wall outlet, turn on the DVD video player, and
leave it for two or three hours. After two or three
hours, the DVD video player will have warmed up and
evaporated any moisture. Keep the DVD video player
connected to the wall outlet and moisture
condensation will seldom occur.
Wa
it!
6
2F60201A [E] P06-09
6
2/22/05, 10:47 AM
Wall outlet
Table of contents
Introduction
Advanced playback
SAFETY PRECAUTIONS ........................................ 2
IMPORTANT SAFEGUARDS ................................... 3
Precautions .............................................................. 6
Table of contents ...................................................... 7
Notes and Information .............................................. 8
Identification of controls ......................................... 11
Front panel ....................................................... 11
Rear panel ........................................................ 11
Display .............................................................. 12
Remote control ................................................. 13
Loading batteries .............................................. 14
Operating with the remote control .................... 14
Zooming ................................................................. 23
Locating desired scene .......................................... 23
Marking desired scenes ......................................... 24
Marking the scenes .......................................... 24
Returning to the scenes ................................... 24
Repeat playback .................................................... 25
A-B Repeat playback ............................................. 25
Program playback .................................................. 26
Random playback .................................................. 26
Changing angles .................................................... 27
Title selection ......................................................... 27
DVD menu .............................................................. 27
Changing soundtrack language ............................. 28
Setting surround sound .......................................... 28
Subtitles ................................................................. 29
To turn off the PBC ................................................. 29
Disc status .............................................................. 29
MP3/WMA/JPEG operation .................................... 30
MP3/WMA/JPEG file information ..................... 30
MP3/WMA playback ......................................... 31
JPEG playback ................................................. 32
JPEG slide show .............................................. 32
Connections
Connecting to a TV ................................................ 15
Connecting to a TV ........................................... 15
Connecting to an audio system and TV
equipped with component video inputs ............ 16
Connecting to a display
(Using the HDMI cable) .................................... 17
Connecting to optional equipment ......................... 18
Connecting to an amplifier equipped with a
Dolby Digital decoder ....................................... 18
Connecting to an amplifier equipped with
Dolby Surround Pro Logic ................................ 18
Connecting to an amplifier equipped with
a DTS decoder ................................................. 18
Connecting to an amplifier equipped with
an MPEG2 audio decoder ................................ 19
Connecting to an amplifier equipped with
a digital audio input .......................................... 19
Basic playback
Playing a disc ......................................................... 20
Basic playback .................................................. 20
Playing in fast reverse or fast forward directions .. 22
Playing frame by frame ..................................... 22
Playing in slow-motion ...................................... 22
Locating a chapter or track ............................... 22
Function setup
Customizing the function settings .......................... 33
Setting procedure ............................................. 33
Setting details ................................................... 34
Temporary disabling of rating level by DVD disc .... 39
Language code list ................................................. 40
Multi brand remote control ..................................... 41
Setting TV control codes .................................. 41
Table of TV brand codes ................................... 41
Others
Troubleshooting guide ............................................ 42
Specifications ......................................................... 43
Limited warranty ..................................................... 44
7
2F60201A [E] P06-09
7
2/22/05, 10:47 AM
Introduction
Notes and Information
On handling discs
Structure of disc contents
Do not touch the playback side of the disc.
Normally, DVD video discs are divided into titles, and
the titles are sub-divided into chapters. Video CDs and
Audio CDs are divided into tracks.
DVD video disc
DVD video disc
Title 1
Chapter 1
Title 2
Chapter 2
Chapter 1
Chapter 2
Chapter 3
Playback side
Do not attach paper or tape to discs.
Video CD/Audio CD
Video CD/Audio CD
Track 1
Track 2
Track 3
Track 4
Track 5
On cleaning discs
Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the center
outwards with a soft cloth. Always keep the disc
clean.
Each title, chapter or track is assigned a number, which
is called “title number”, “chapter number” or “track
number” respectively.
There may be discs that do not have these numbers.
Notes on copyright
Do not use any type of solvent such as thinner,
benzine, commercially available cleaners or antistatic
spray for vinyl LPs. It may damage the disc.
On storing discs
Do not store discs in a place subject to direct sunlight
or near heat sources.
Do not store discs in places subject to moisture and
dust such as a bathroom or near a humidifier.
Store discs vertically in a case. Stacking or placing
objects on discs outside of their case may cause
warping.
The unauthorized recording, use, distribution, or
revision of copyrighted materials including, without
limitation, television programs, videotapes, and DVDs,
is prohibited under the copyright laws, and may subject
you to civil and criminal liability.
This product incorporates copyright protection
technology that is protected by method claims of certain
U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
Consumers should note that not all high definition
television sets are fully compatible with this product and
may cause artifacts to be displayed in the picture. In case
of 525 progressive scan picture problems, it is
recommended that the user switch the connection to the
“STANDARD DEFINITION” output. If there are questions
regarding our TV set compatibility with this model 525p
DVD player, please contact our customer service center.
8
2F60201A [E] P06-09
8
2/22/05, 10:47 AM
Notes and Information (continued)
About this owner’s manual
This owner’s manual explains the basic instructions of
this DVD video player. Some DVD video discs are
produced in a manner that allows specific or limited
operation during playback. As such, the DVD may not
respond to all operating commands. This is not a defect
in the DVD. Refer to instruction notes of discs.
Playable discs
This DVD video player can play the following discs.
Disc Mark
Contents
Disc
Size
Maximum
playback time
Approx. 4 hours
(single sided disc)
12 cm
“
” may appear on the TV screen during operation.
A“
” means that the operation is not permitted by the
DVD or the disc.
For example, sometimes it is unable to stop the playback
of copyright message of the disc when the STOP (3)
button is pressed. Alternatively, the “
” may also
indicate that the feature is not available for the disc.
Audio
+
Video
(moving
pictures)
DVD
video
discs
Approx. 8 hours
(double sided disc)
Approx. 80 minutes
(single sided disc)
8 cm
Approx. 160 minutes
(double sided disc)
Notes on region numbers
The region number of this DVD is 1. If region numbers,
which stand for their playable area, are printed on your
DVD video disc and you do not find 1 or ALL , disc
playback will not be allowed by the player. (In this case,
the DVD will display a message on-screen.)
Video
CDs
DIGITAL VIDEO
Audio
+
Video
(moving
pictures)
On Video CDs
This DVD supports Video CDs equipped with the PBC
(Version 2.0) function. (PBC is the abbreviation of
Playback Control.) You can enjoy two playback
variations depending on types of discs.
• Video CD not equipped with PBC function
(Version 1.1)
Sound and movie can be played on this unit in the
same way as an audio CD.
• Video CD equipped with PBC function
(Version 2.0)
In addition to operation of a Video CD not equipped
with the PBC function, you can enjoy playback of
interactive software with search function by using the
menu displayed on the TV screen (Menu Playback).
Some of the functions described in this owner’s
manual may not work with some discs.
Audio
CDs
12 cm
Approx. 74 minutes
8 cm
Approx. 20 minutes
12 cm
Approx. 74 minutes
8 cm
(CD
single)
Approx. 20 minutes
Audio
The following discs are also available.
DVD-R/RW discs of DVD video format
CD-R/CD-RW discs of CD-DA, Video CD, SVCD,
MP3, WMA or JPEG format
Kodak Picture CD and FUJICOLOR CD format
Some of these discs may be incompatible.
• You cannot play discs other than those listed above.
• You cannot play discs of DVD-RAM, DVD-ROM, Photo
CD, etc., or non standardized discs even if they may be
labeled as above.
• Some CD-R/RWs cannot be played back depending on
the recording conditions.
• This unit uses the NTSC color system, and cannot play
DVD video discs recorded in any other color system
(PAL, SECAM, etc.).
Because of problems and errors that can occur during the
creation of DVD software and/or the manufacture of DVD
discs, Toshiba cannot guarantee that this player will play
every feature of every DVD bearing the DVD logo. As one
of the creators of DVD technology, Toshiba DVD players
are manufactured using the highest standards of quality,
and as a result, such incompatibilities are rare. If you
happen to experience any difficulty playing a DVD on a
Toshiba DVD player, please feel free to call our Contact
listed in “How to Obtain Warranty Services” (see page 45).
9
2F60201A [E] P06-09
9
2/22/05, 10:47 AM
Introduction
Notes and Information (continued)
Notes on Media cards
Playable Media cards
This unit can play the following cards.
Playable
Card Mark
Contents card
capacity
SD (Secure DigitalTM)
memory card
32 MB –
1 GB
MMC
(MultiMediaCardTM)
8 MB –
1 GB
MP3/
WMA/
JPEG
files
xD-Picture card
16 MB –
512 MB
Memory StickTM
16 MB –
128 MB
Memory StickTM (Pro)
128 MB –
2 GB
CompactFlash®
memory card (Type 1)
8 MB –
4 GB
• Do not insert any cards other than those listed above as this
may cause a malfunction of the unit or cards.
• Some Media cards may not be played back due to its capacity and/or manufacturer, etc.
• Ensure that you insert the Media card correctly into the media
card slot.
• Never remove the Media card or turn off the unit while using
the Media card. Doing so may result in loss of data or damage to the Media card or the unit. SUCH DAMAGE IS NOT
COVERED BY YOUR TOSHIBA WARRANTY.
• It is recommended that you back up your Media card data.
Toshiba is not liable for any damage caused by the use of
any Media card with this unit. Toshiba will not compensate
for any lost data or recording(s) caused by the use of such
cards.
• Media card is a precision electrical instrument. Do not bend,
drop or apply strong force to it.
• Do not use or store the Media card in an environment of
high static electricity or electrical interference.
• Avoid using or storing in areas of high temperature and humidity.
• Prevent contact of the metallic area on the Media card with
dust, dirt, or other foreign particles. Do not touch the metallic area of the Media card with your hands or otherwise handle it with anything other than a soft, dry, lint-free, antistatic
cloth.
• Use index labels made exclusively for your specific brand of
Media card. Do not use commercially sold labels, which can
cause a malfunction when the card is inserted or ejected.
• When ejecting the Media card after extended use it may
feel warm to the touch. This is normal. The Media card is
not malfunctioning.
• For instructions on using your Media card, refer to the owner’s manual for your Media card.
SD (Secure Digital) memory card is a trademark of Matsushita Electric Industry, Toshiba Corporation, and SanDisk Corporation.
MMC and MultiMediaCard are trademarks of Infineon Technologies AG and lisensed to MMCA (MultiMediaCard Association).
Memory Stick is a trademark of Sony Corporation.
Toshiba is an authorized licensee of the CompactFlash® and CF logo® registered trademarks.
10
2F60201A [E] P10-14
10
2/22/05, 10:47 AM
Identification of controls
See the page in
for details.
Front panel
" #! ! !
! #!
"" $""!%
&'#! #!
" ! #( $%
-! #!
!
# !
" #! ! !
) #*+ ! #!,
"
Rear panel
OPTICAL DIGITAL AUDIO OUT jack 18 19
VIDEO OUT jack 15
S-VIDEO OUT jack 15
HDMI OUT jack 17
COMPONENT VIDEO OUT (Y/PB/PR) jacks 16
AC Power cord
AUDIO OUT (L/R) jacks 15 16
COAXIAL DIGITAL AUDIO OUT jack 18 19
11
2F60201A [E] P10-14
11
2/22/05, 10:47 AM
Introduction
Identification of controls (continued)
Display
Information about the unit and the disc is shown here.
There is no disc in the unit.
The disc tray is open.
DVD video disc
Video CD/Audio CD
• During playback
• During playback
The elapsed time (hh:mm) is displayed.
The elapsed time at track (mm:ss) is displayed.
• Full stop
• Full stop
The total time (mm:ss) is displayed.
The unit cannot read the disc, or the disc may be damaged.
The display may vary depending on the types of discs you play.
12
2F60201A [E] P10-14
12
2/22/05, 10:47 AM
The instructions in this manual describe the functions on the remote control. See the page in
for details.
Remote control
!"#$
!
'
"
!
!
%
$
!
'(' ) "
,!! "
*" "
% %
!
!
++ !!
"
% %
#
"& #
MENU button
Use the MENU button to display the menu included on
many DVD video discs. To operate a menu, follow the
instructions in “DVD Menu.” 27
)
"
!
"
!!
%
&
& '
*TV control buttons
The various brands of TV listed on page 41 can be
operated with this remote control. There may be some
TV models that cannot be operated with this remote
control. If this is the case, use the original remote control
supplied with the TV.
13
2F60201A [E] P10-14
13
2/22/05, 10:47 AM
Introduction
Identification of controls (continued)
Loading batteries
1
Open the battery compartment cover in the
direction of the arrow.
2
Install two “R03/AAA” batteries (supplied),
paying attention to the polarity diagram in the
battery compartment.
Operating with the remote control
Point the remote control at the remote sensor and
press the buttons.
Within approx. 7 m (23 feet)
Distance: Approx. 7 m (23 feet) from the front of the
remote sensor
Angle:
Approx. 30° in each direction of the front of
the remote sensor
3
Replace the compartment cover.
Caution:
• Never throw batteries into a fire.
Notes:
• Be sure to use AAA size batteries.
• Dispose of batteries in a designated disposal area.
• Attention should be drawn to the environmental aspects of
battery disposal.
• Do not mix different battery types or combine used batteries
with new ones.
• If the remote control does not operate correctly, or if the
operating range becomes reduced, replace both batteries
with new ones.
• If the batteries are dead or if you will not be using the remote
control for a long time, remove the batteries to prevent
battery acid from leaking into the battery compartment.
* Do not expose the remote sensor of the DVD video
player to a strong light source such as direct sunlight
or other illumination. If you do so, you may not be able
to operate the DVD video player via the remote
control.
Notes on the remote control
• Direct the remote control at the remote sensor of the DVD
video player.
• Do not drop or give the remote control a shock.
• Do not leave the remote control near an extremely hot or
humid place.
• Do not spill water or put anything wet on the remote control.
• Do not disassemble the remote control.
• When using the remote control, press the button at intervals
of about 1 second to ensure the correct mode of operation.
14
2F60201A [E] P10-14
14
2/22/05, 10:47 AM
Connecting to a TV
Connect the DVD video player to your TV.
Connecting to a TV
Signal flow
(white)
(red)
(yellow)
To AUDIO
OUT
To wall outlet
To S-VIDEO OUT
To VIDEO
OUT
S-Video cable (not supplied)
To S-Video input
(yellow)
Audio/video cable (supplied)
To video input
To audio inputs
If the TV has an S-Video input,
connect the DVD video player with
an S-Video cable. When using an
S-Video cable, do not connect the
yellow video cable.
(red)
(white)
TV or monitor with
audio/video inputs
• Make sure following setting.
On-screen display
Select:
Page
“Digital Out”
“PCM” or “Raw”
36
Notes:
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet
before making any connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD video player to a Y cable
adapter (not supplied) and then connect to your TV.
• Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR combination or
video selector, the playback picture may be distorted as DVD video discs are copy protected.
15
2F60201A [E] P15-19
15
2/22/05, 10:47 AM
Connections
Connecting to a TV (continued)
Component video outputs
PROGRESSIVE outputs
Some TVs or monitors are equipped with component video inputs
that are capable of reproducing a progressively scanned video
signal. Connecting to these inputs allows you to view the highest
quality pictures with less flicker.
INTERLACED outputs
Some TVs or monitors are equipped with component video inputs.
Connecting to these inputs allows you to enjoy the highest quality
DVD picture playback.
Connecting to an audio system and TV equipped with component video inputs
Signal flow
To AUDIO OUT
(white)
(red)
To Y
VIDEO
OUT
To PR
VIDEO
OUT
To PB
VIDEO
OUT
To wall outlet
If the TV has the Component input,
connect the DVD video player with
the Component cable. When using
the Component cable, do not
connect the yellow video cable.
Audio cable
(not supplied)
To PB video input
TV or monitor with
ColorStream®
component video inputs
To PR video input
To audio inputs
of the amplifier
To Y video input
(white)
(red)
Component video cable (not supplied)
Audio system
Notes:
• Actual labels for component video inputs may vary depend
ing on the TV manufacturer. (ex. Y, R-Y, B-Y or Y, CB, CR)
• In some TVs or monitors, the color levels of the playback
picture may be reduced slightly or the tint may change. In
such a case, adjust the TV or monitor for optimum
performance.
• Make sure following setting.
On-screen display
Select:
Page
“Digital Out”
“PCM” or “Raw”
36
Notes:
• Refer to the owner’s manual of the connected equipment as well.
• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment
from the wall outlet before making any connections.
• If you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the
DVD video player away from the tuner and radio.
• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD video player’s power cord. If you leave the amplifier power
on, the speakers may be damaged.
16
2F60201A [E] P15-19
16
2/22/05, 10:47 AM
About HDMI
HDMI (High Definition Multimedia Interface) supports both video
and audio on a single digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices. HDMI was developed to
provide the technologies of High Bandwidth Digital Content
Protection (HDCP) as well as Digital Visual Interface (DVI) in one
specification. HDCP is used to protect digital content transmitted
and received by DVI-compliant or HDMI-compliant displays.
HDMI has the capability to support standard, enhanced, or highdefinition video plus standard to multi-channel surround-sound
audio. HDMI features include uncompressed digital video, a
bandwidth of up to 2.2 gigabytes per second (with HDTV signals),
one connector (instead of several cables and connectors), and
communication between the AV source and AV devices such as
DTVs.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI licensing LLC.
Connecting to a display (Using the HDMI cable)
Signal flow
To HDMI OUT
To wall outlet
If the TV has a HDMI input,
connect the DVD video player with
a HDMI cable. When using a HDMI
cable, do not connect the yellow
video cable.
HDMI Cable (supplied)
To HDMI input
HDMI-compatible display
Switching the video quality (HDMI mode) using HDMI
button on the remote control
Press HDMI on the remote control to receive suitable video
quality. The video quality is required to match your TV having
HDMI feature and suitable quality, please check your TV
owner's manual.
Pressing HDMI changes the video quality as follows:
480p
720p
• Make sure following setting.
On-screen display
Select:
Page
“Digital Out”
“PCM”
36
1080i
Notes:
• Refer to the Owner's manual of the connected TV as Well.
• When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet
before making any connections.
• If you have a HDMI (with HDCP) equipped monitor or display, you can connect it to this player using the supplied HDMI cable.
• The HDMI connector outputs uncompressed digital video, as well as almost every kind of digital audio that the player is
compatible with, including DVD-Video, Video CD, CD and MP3.
• No sound will be output from the HDMI cable if the Digital Out is not set to PCM 36 .
17
2F60201A [E] P15-19
17
2/22/05, 10:47 AM
Connections
Connecting to optional equipment
You can enjoy high quality dynamic sounds by connecting the
unit to optional audio equipment.
For connection to your TV, see “Connecting to a TV” #
16
17 .
: Front speaker
: Rear speaker
: Sub woofer
: Center speaker
: Signal flow
Connecting to an amplifier equipped with a Dolby Digital decoder
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest movies, and
is now available to reproduce this realistic effect in the home. You can enjoy motion picture and
live concert DVD video discs encoded via the Dolby Digital recording system with this dynamic
realistic sound by connecting the DVD video player to a 6 channel amplifier equipped with a
Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic
decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full
5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark.
• Use DVD video discs encoded via
the Dolby Digital recording system.
• Make sure following setting.
Amplifier equipped with a
Dolby Digital decoder
To COAXIAL
type digital
audio input
Manufactured under license from
Dolby Laboratories. “Dolby”, “Pro
Logic”, and the double-D symbol
are trademarks of Dolby
Laboratories.
On-screen display
“Digital Out”
Optical cable (not supplied)
Select:
Page
“PCM” or “Raw” 36
Connect either
75 Ω coaxial cable (not supplied)
Connecting to an amplifier equipped with Dolby Surround Pro Logic
Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right and left
front speakers, a center speaker, and one or two rear speakers).
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in “Connecting to an amplifier equipped with a Dolby Digital decoder.” Refer to
that amplifier’s owner’s manual and set the amplifier so you can enjoy Dolby Surround Pro Logic sound.
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
• This connection is only suitable for Video CDs and Audio CDs.
• Make sure following setting.
On-screen display
*
“Digital Out”
Amplifier equipped with
Dolby Surround Pro Logic
To audio input
To AUDIO OUT
Audio cable (not supplied)
Select:
Page
“PCM” or “Raw” 36
* Connect one or two rear speakers.
The output sound from the rear
speakers will be monaural even if you
connect two rear speakers.
Connecting to an amplifier equipped with a DTS decoder
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now available for home use, on
DVD video discs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS
encoded sound tracks on DVD video discs or audio CDs.
• Use DVD video discs or audio CDs
encoded via the DTS recording
system.
Amplifier equipped with
a DTS decoder
To COAXIAL
type digital
audio input
“DTS” and “DTS Digital Out” are
registered trademarks of Digital
Theater Systems, Inc.
• Make sure following setting.
Optical cable (not supplied)
On-screen display
Select:
Page
“Digital Out”
“Raw”
36
Connect either
75 Ω coaxial cable (not supplied)
18
2F60201A [E] P15-19
18
2/22/05, 10:47 AM
Warning
When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog stereo
jacks. To avoid possible damage to the audio system, you should take proper precautions when the AUDIO OUT (L/R) jacks
of the DVD video player are connected to an amplification system. (Do not leave the ANALOG AUDIO OUT (L/R) cables
dangling.) To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must
be connected to the COAXIAL DIGITAL AUDIO OUT jack of the DVD video player.
Connecting to an amplifier equipped with an MPEG2 audio decoder
MPEG2 sound
You can enjoy motion picture and live concert DVD video discs encoded via the MPEG2 recording system with dynamic realistic
sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.
• Use DVD video discs encoded
via the MPEG2 recording
system.
• Make sure following setting.
Amplifier equipped with an
MPEG2 audio decoder
To COAXIAL
type digital
audio input
Optical cable (not supplied)
Connect either
75 Ω coaxial cable (not supplied)
On-screen display
Select:
Page
“Digital Out” “PCM” or “Raw” 36
Connecting to an amplifier equipped with a digital audio input
2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and
speaker system (right and left front speakers).
Amplifier equipped with
a digital audio input
To COAXIAL
type digital
audio input
Optical cable (not supplied)
75 Ω coaxial cable (not supplied)
• Make sure following setting.
Connect either
On-screen display
Select:
Page
“Digital Out”
“PCM”
36
Notes:
• DO NOT connect the OPTICAL or COAXIAL DIGITAL AUDIO OUT jack of the DVD video player to the AC-3 RF input of a
Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the
OPTICAL or COAXIAL DIGITAL AUDIO OUT jack of the DVD video player.
• Connect the OPTICAL DIGITAL AUDIO OUT jack of the DVD video player to the “OPTICAL” input of a Receiver or Processor.
• Connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD video player to the “COAXIAL” input of a Receiver or Processor.
• Refer to the owner’s manual of the connected equipment as well.
• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment
from the wall outlet before making any connections.
• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD video player’s power cord. If you leave the amplifier power
on, the speakers may be damaged.
19
2F60201A [E] P15-19
19
2/22/05, 10:47 AM
Basic playback
Playing a disc
This section shows you the basics on how to play a disc.
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
DVD
VCD
CD
Basic playback
Preparations:
• When you want to view a disc, turn on the TV and select the corresponding video input connected to the DVD. This
may include S-video or component video inputs which are exclusive to DVD playback.
• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input
connected to the DVD.
1
2
Press DVD on the remote control to operate
the DVD video player.
Press
5
Press OPEN/CLOSE or PLAY on the unit.
OR
ON/STANDBY.
The DVD turns on and the Power
indicator lights up.
“Reading Disc” display will change to
“No Disc”.
(If DVD disc has already loaded, playback will start automatically.)
The disc tray closes automatically.
On the TV-screen, “ ” changes to
“Reading Disc” and then playback
commences.
Reading Disc
• A menu screen will appear on the TV screen, if
No Disc
the disc has a menu feature.
Press C/D or B/A to select title, then press
ENTER. Title is selected and play commences.
6
3
Press OPEN/CLOSE.
4
Place the disc on the disc tray.
The disc tray opens.
With the playback
side down
Press STOP to end playback.
Resuming facility
• The unit records the stopped point,
depending on the disc. “ ”
appears on the screen. Press
PLAY to resume playback (from the
scene point).
• If you press STOP again or unload
the disc (“ ” appears on the
screen.), the unit will clear the
stopped point.
To start playback in the stop mode
Press PLAY.
• There are two different disc sizes. Place the disc
in the correct guide on the disc tray. If the disc is
out of the guide, it may damage the disc and
cause the DVD to malfunction.
• Do not place a disc which is unplayable in this DVD.
20
2F60201A [E] P20-22
20
2/22/05, 10:47 AM
OPEN/CLOSE
POWER
DVD
C/D/B/A
ENTER
PLAY
STOP
PAUSE/STEP
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during a normal broadcast
may appear on the TV screen while playing a DVD video disc because the high
resolution pictures on these discs include a lot of information. While the amount of
noise depends on the TV you use with this unit, you should generally reduce the
sharpness adjustment on your TV when viewing DVD video discs.
About DVD VCD CD CARD
The DVD VCD CD icons on the heading bar show the playable discs for the
function described under that heading.
DVD : You can use this function with DVD video discs.
VCD : You can use this function with Video CDs.
CD
: You can use this function with Audio CDs and CD-R/RW CDs.
CARD : You can use this function with Media cards.
To pause playback (still mode)
Press PAUSE/STEP during playback.
To resume normal playback, press
PLAY.
To remove the disc
Press OPEN/CLOSE.
Remove the disc after the disc tray
opens completely.
• The sound is muted during still
mode.
To stop playback
Press STOP.
Be sure to press OPEN/CLOSE to close the disc tray
after you remove the disc.
Screen saver function
The screen saver operates when you leave the unit in
DVD stop mode for approx. five minutes.
The screen will repeatedly get dark gradually and back
to normal.
Notes:
• If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen
according to the type of loaded disc. In this case, check your disc again (see pages 9 and 37).
• Some discs may take a minute or so to start playback.
• When you set a single-faced disc label downwards (i.e. the wrong way up) and press OPEN/CLOSE or PLAY on the unit,
“Reading Disc” will appear on the display for a few minutes and then “Incorrect Disc” will continue to be displayed.
• Some discs may not work the resuming facility.
• Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 29.
• Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according to
the disc contents the software producers designed, some playback features may not be available. Also refer to the
instructions supplied with the DVDs.
• Do not move the unit during playback. Doing so may damage the disc.
• Use the OPEN/CLOSE to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may cause the
unit to malfunction.
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the unit to
malfunction.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press
POWER (I / ) on your remote control once the movie is completed.
• There may be a slight delay between you pressing the button and the function activating.
• The screen saver does not operate when connecting the DVD video player to the TV using the HDMI cable.
21
2F60201A [E] P20-22
21
2/22/05, 10:48 AM
Basic playback
PAUSE/STEP
Playing a disc (continued)
You can play discs at various speeds.
PLAY
FF
SKIP /
SLOW /
REV
DVD
VCD
CD
Playing in fast reverse or fast forward directions
To resume normal playback
Press PLAY.
Press REV or FF during playback.
REV: Fast reverse playback
FF: Fast forward playback
Each time you press REV or FF, the
playback speed changes.
DVD
VCD
Notes:
• The DVD video player mutes sound and subtitles during
reverse and forward scan of DVD/VCD video discs.
However, this unit plays sound during fast forward or fast
reverse play of audio CDs.
• The playback speed may differ depending on the disc.
Playing frame by frame
Press PAUSE/STEP during still playback.
To resume normal playback
Press PLAY.
Each time you press PAUSE/STEP,
the picture advances one frame.
Note:
The sound is muted during frame by frame playback.
DVD
VCD
Playing in slow-motion
Press SLOW ( ) Forward or SLOW (
during playback.
) Reverse
Each time you press the button, the
slow-motion speed changes.
DVD
VCD
CD
To resume normal playback
Press PLAY.
Notes:
• The sound is muted during slow-motion playback.
• The Video CD cannot play Reverse Slow.
Locating a chapter or track
Press SKIP
or
repeatedly to display the chapter or track number you want.
Playback starts from the selected chapter or track.
To locate succeeding chapters or
tracks.
Playback starts from the beginning of the
current chapter or track.
When you press twice in quick successions,
playback starts from the beginning of the
preceding chapter or track.
Notes:
• A “Prohibition” symbol
may appear at the upper left of the screen. This symbol means either the feature you tried is not
available on the disc, or the DVD cannot access the feature at this time. This does not indicate a problem with the DVD.
• The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leave
the still video image or On screen display image displayed on your TV for an extended period of time, you risk permanent
damage to your television screen. Projection televisions are very susceptible.
22
2F60201A [E] P20-22
22
2/22/05, 10:48 AM
Advanced playback
SEARCH
0–9
Zooming/Locating desired scene
DISPLAY
ZOOM
C/D/B/A
ENTER
CLEAR
DVD
VCD
CD
Zooming
This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame.
1
Press ZOOM during playback.
The center part of the image will be
zoomed in.
Each press of ZOOM will change the
ZOOM 1 (x 1.3), 2 (x 1.5) and 3
(x 2.0).
1
2
D/B
B/A
A to view a different part of the
Press C/D
frame.
You may move the frame from the
centre position to UP, DOWN, LEFT
or RIGHT direction.
3
In the zoom mode press ZOOM repeatedly to
return to a 1:1 view ( Off).
Notes:
• You can select the Pause, Slow or Search playback in the zoom mode.
• Some discs may not respond to zoom feature.
DVD
VCD
CD
Locating desired scene
Use the title, chapter and time recorded on the DVD disc to locate the desired point to play back. In the case of VCD/CD
discs, time and track are used to locate the desired point to play back. To check the title, chapter and time, press DISPLAY.
1
Press SEARCH during playback or stop mode.
3
• “Time” only works in playback or
resume stop mode.
2
• If you input a wrong number, press
CLEAR.
• Refer to the package supplied with
the disc to check the numbers.
Press C or D to select the “Time”, “Title” or
“Chapter”.
Press Number buttons (0–9) to change the
number.
4
Press ENTER. Playback starts.
• When you change the title,
playback starts from Chapter 1
of the selected title.
• Some discs may not work in the
above operation.
Note:
In case of the Video-CD playback with PBC, the SEARCH does not work. To turn off PBC, see page 29 .
2F60201A [E] P23-26
23
2/22/05, 10:48 AM
23
Advanced playback
Marking desired scenes
ENTER
The unit stores the points that you want to watch again up to 3 points.
You can resume playback from each scene.
C/D
CLEAR
MARKER
DVD
VCD
1
Marking the scenes
Press MARKER during playback.
DVD
VCD
1
Returning to the scenes
Press MARKER during playback or stop mode.
2
Select the blank Marker using C or D.
Then press ENTER at the desired scene.
2
Press C or D to select the Marker 1-3.
• Repeat this procedure to set
the other 2 scenes.
3
3
Press ENTER.
Playback starts from the marked
scene.
Press MARKER to remove this display.
To cancel the Marker
Follow the above steps 1~2, then press CLEAR.
Notes:
• Some discs may not work with the marking operation.
• The marking is cancelled when you open the disc tray or turn
the power off.
• Some subtitles recorded around the marker may fail to
appear.
24
2F60201A [E] P23-26
24
2/22/05, 10:48 AM
Repeat playback/A-B Repeat playback
D/B/A
PLAY
PLAYMODE
A-B RPT
DVD
VCD
CD
1
2
DVD
VCD
CD
Repeat playback
Press PLAYMODE during playback or stop mode.
A-B Repeat playback
A-B repeat playback allows you to repeat material between
two selected points.
1
Press A-B RPT during playback.
The start point is selected.
A
DVD
A to select “Chapter” or “Title”.
Press B/A
The unit automatically starts repeat
playback after finishing the current title or chapter.
Repeat
Off
/Play Mode
2
Press A-B RPT again.
The end point is selected. Playback
starts at the point that you selected.
Playback stops at the end point, returns to Point A automatically, then
starts again.
Audio CD, Video CD, MP3/WMA CD
Press D to select “Repeat”.
A to select “Track” or “All”.
Press B/A
A B
The unit automatically starts repeat
playback after finishing the current
track.
• If you set the repeat mode during stop mode,
press PLAY to start Repeat playback.
3
Press PLAYMODE again to make the screen
disappear.
To resume normal playback
Select Repeat : “Off” in step 2.
Notes:
• Some discs may not work with the repeat operation.
• In case of Video CD with PBC, repeat functions are prohibited during playback.
To resume normal playback
Press A-B RPT again.
“
Off ” appears on the screen.
Notes:
• In A-B Repeat mode, subtitles near the A or B locations may
not be displayed.
• You cannot set the A-B Repeat for the scenes that include
multiple angles.
• A-B Repeat playback does not work when Repeat playback is
activated.
• You may not be able to set A-B Repeat, during certain scenes
of the DVD.
• A-B Repeat does not work with an interactive DVD, MP3/WMA/
JPEG CD.
• A-B Repeat is prohibited when PBC is on.
25
2F60201A [E] P23-26
25
2/22/05, 10:48 AM
Advanced playback
0–9
Program playback/Random playback
You can arrange the playback order of tracks or files on the disc. And
also the unit selects tracks or files at random and playback them.
These feature works for Audio CD, Video CD and MP3/WMA/JPEG
CD.
VCD
CD
C/D/B/A
ENTER
CLEAR
PLAY
SKIP
PLAYMODE
Program playback
1
Press PLAYMODE during stop mode.
4
2
D to select Play Mode, then press
Press C/D
B/A
A to select “Program”.
D/B
B/A
A to select “Program Playback”
Press C/D
and press ENTER.
The programs you selected will start to playback in
the order.
• In case of JPEG file, press SKIP
Play Mode
Repeat
1
2
3
Clear
3
4
5
6
: Program
: Off
7
8
9
10
11
12
Program Playback
/Enter/0 9/Clear/Play Mode
D or B/A
Press C/D
A to select the programming
position. Use Number buttons (0–9) to input the
track or file numbers.
• To program others, repeat step 3.
• If you input a wrong number, press
CLEAR.
Play Mode
Repeat
1 9
2 3
3 11
Clear
VCD
CD
to continue
the program playback.
• To resume normal playback, select Play Mode:
“Off” in step 2.
!
"#$" "" !
4
5
6
: Program
: Off
7
8
9
10
11
12
Program Playback
/Enter/0 9/Clear/Play Mode
■ To change the program
1. In the program mode, press C/D/B /A to select the track
number.
2. Press Number buttons (0–9) to select the track number
to be replaced.
■ To clear the program one by one
In the program mode, press C/D/B/A to select the track
number. Then press CLEAR.
■ To clear all the programs
In the program mode, press C/D/B/A to select “Clear”.
Then press ENTER.
Notes:
• In playing back the Video CD with PBC, you cannot set
Program playback.
• The program is cancelled when you open the disc tray or
turn the power off.
Random playback
1
Press PLAYMODE during playback or stop
mode.
2
D to select Play Mode, then press
Press C/D
B/A
A to select “Random”.
/Play Mode
3
Press PLAY.
The Random Playback will start.
• If you set “Random” during playback mode,
Random playback will begin after the track that is
currently being played has ended.
• To resume normal playback, select Play Mode:
“Off” in step 2.
Note:
In playing back the Video CD with PBC, you cannot set
Random playback.
26
2F60201A [E] P23-26
26
2/22/05, 10:48 AM
Changing angles/Title selection/DVD menu
TOP MENU
MENU
C/D/B/A
ENTER
PLAY
ANGLE
DVD
Changing angles
When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from.
1
Press ANGLE during playback.
The current angle will appear.
2
Press ANGLE repeatedly until the desired angle
is selected.
1/9
Note:
Depending on the DVD, you may not be able to change the
angles even if multi-angles are recorded on the DVD.
DVD
Title selection
Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title.
1
Press TOP MENU during playback.
2
D/B
B/A
A to select the desired title.
Press C/D
Title menu appears on the screen.
3
Press ENTER or PLAY.
The playback of the selected title will
start.
Note:
Depending on the DVD, you may not be able to select the title.
Depending on the DVD, a “title menu” may simply be called a
“menu” or “title” in the instructions supplied with the disc.
DVD
DVD menu
Some DVDs allow you to select the disc contents using the menu.
When you play back these DVDs, you can select the subtitle language and sound-track language, etc. using the menu.
1
Press MENU during playback.
The DVD menu appears on the screen.
• Press MENU again to resume
playback at the scene when you
pressed MENU.
2
D/B
B/A
A to select the desired item.
Press C/D
3
Press ENTER.
The menu continues to another
screen. Repeat steps 2 and 3 to set
the item completely.
Note:
Depending on the DVD, you may not be able to resume playback
from the scene point when you pressed MENU.
27
2F60201A [E] P27-33
27
2/22/05, 10:48 AM
Advanced playback
Changing soundtrack language/
Setting surround sound
B/A
AUDIO
DVD
VCD
Changing soundtrack language
You can select the language when you play a multilingual disc.
1
Press AUDIO during playback.
The current soundtrack language will
appear.
In case of Video CD playback
Audio type changes as follows each time you press AUDIO.
LR
QSound Off
2/8 Fra Dolby Digital
QSound Off
2
Press AUDIO repeatedly until the desired language is selected.
1/8 Eng Dolby Digital
QSound Off
L
QSound Off
R
QSound Off
Notes:
• If the desired language is not heard after pressing the
button several times, the language is not recorded on
the disc.
• Changing soundtrack language is cancelled when you
open the disc tray. The initial default language or available
language will be heard if the disc is played back again.
• The on screen display will disappear after a few
seconds.
DVD
VCD
CD
Setting surround sound
This DVD video player equipped with a “QSound”. It can produce the effect of being in a cinema or a concert hall.
1
During disc playback press AUDIO.
1/8 Eng Dolby Digital
QSound Off
2
To cancel Surround mode:
Follow the left steps 1~2, then press B or A to select the
“Off” position.
Notes:
• The “QSound” is effective only for the sound of disc.
• The QSound setting can also be changed in the function
setting. (See page 36.)
Press B or A to select “On”.
1/8 Eng Dolby Digital
QSound On
• The on screen display will disappear after a few
seconds.
Manufactured under license from QSound Labs,
Inc. U.S. patent Nos. 5,105,462, 5,208,860 and
5,440,638 and various foreign counterpart.
Copyright QSound Labs, Inc. 1998-2002.
QXpander™ is a trademark of QSound Labs, Inc.
All rights reserved.
28
2F60201A [E] P27-33
28
2/22/05, 10:48 AM
1
Subtitles/To turn off the PBC/Disc status
DISPLAY
▲/▼/ /
ENTER
SUBTITLE
PLAYMODE
DVD
DVD
VCD
CD
Subtitles
When playing back a disc recorded with subtitles, you can
select the subtitle language or turn the subtitle off.
1
Disc status
With each press of DISPLAY, the status of the disc
will appear on the screen and change as follows.
Press SUBTITLE repeatedly during playback
until your desired language appears.
DVD
1/8 Eng
00:34:56 01:12:33
00:34:56 01:12:33
1/99 Chapter 1/999
1/9
1/8 Eng Dolby Digital
1/32 Eng
Title
2
To turn off the subtitle, press SUBTITLE until
“Off” appears.
To make status display disappear, press DISPLAY again.
Off
Video CD
00:12
• The on screen display will disappear after a few
seconds.
Notes:
• Depending on the DVD, you may not be able to change
subtitles, or to turn subtitles on or off.
• While playing a DVD, the subtitle may change when you
open or close the disc tray.
• In some cases, a selected subtitle language may not be
changed immediately.
1
2
To turn off the PBC
PBC
Track –/–
00:12
04:32
To make status display disappear, press DISPLAY again.
Audio CD
34:56
VCD
04:32
71:33
Track 11/99
Press PLAYMODE in the stop mode.
When you playback the CD disc, the status display will
appear on the screen and continue displaying.
Press ▲ / ▼ to select Play Mode, then press
/ to select “Off”.
Play Mode
:
Off
Repeat
:
Off
/Play Mode
3
Press PLAYMODE again to make the screen
disappear.
To turn on the PBC
Select Play Mode : “PBC” in step 2.
Note:
You can also turn off the PBC by pressing number button 1
and ENTER in the stop mode.
2F60201A [E] P27-33
29
29
2/22/05, 10:48 AM
Advanced playback
MP3/WMA/JPEG operation
This player can play back the MP3/WMA/JPEG-data which has been recorded on CD-R, CD-RW or Media card.
Note:
This unit requires discs/recordings to meet certain technical standards in order to achieve optimal playback quality.
Prerecorded DVDs are automatically set to these standards. There are many different types of recordable disc formats
(including CD-R containing MP3/WMA files). Given the fact that technology in this area is still maturing, Toshiba cannot
guarantee that all genre of recordable discs will produce optimal playback quality. The technical criteria set out in this
owner’s manual are meant as a guide only.
Please be advised that you must obtain permission from the applicable copyright owners to download copyrighted content,
including music files, in any format, including the MP3 and WMA formats, prior to the downloading thereof. TOSHIBA has no
right to grant and does not grant permission to download any copyrighted content.
MP3/WMA/JPEG file information
Limitations on MP3/WMA/JPEG file playback
• MP3/WMA/JPEG file is the disc/card that is standardized by ISO9660, its file name must include 3-digits extension
letters, “mp3”, “wma”, “jpg”.
• MP3/WMA/JPEG file must be correspond to the ISO standardized files.
• This unit can read 600 files per disc/card. If one directory has more than 600 files, it reads up to 600 files, the
remaining files will be omitted.
• The unit is able to recognize up to a maximum of 50 directories per disc/card.
• MP3/WMA/JPEG files cannot be used for the purpose of recording.
• If the disc/card has both audio tracks and MP3/WMA/JPEG files, only audio tracks are played.
• It may take more than one minute for this unit to read MP3/WMA/JPEG files depending on its structure.
• Music recorded by “Joliet Recording Specification” can be played back, the file name is displayed (within 16
letters) on the screen. Long file names will be condensed.
• The music files recorded by “Hierarchical File System” (HFS) cannot be played.
Limitations on display
• The maximum number for display is 16 letters.
Available letters for display are the following:
capital or small alphabets of A through Z, numbers of 0 through 9, and _ (under score).
• Other letters than those above are replaced in hyphen.
Notes on MP3/WMA/JPEG files
To play back MP3/WMA/JPEG file in the recorded order,
1. Use MP3/WMA/JPEG software that records data alphabetically or numerically.
2. Name each file including two-digit or three-digit number (ex. “01” “02” or “001” “002”).
3. Refrain from making too many sub-folders.
CAUTION:
• Some MP3/WMA/JPEG CDs/Cards cannot be played back depending on the recording conditions.
• The CD/cards that has no music data or non MP3/WMA/JPEG files cannot be played back.
Standard, sampling frequency, and the bit rate:
MP3 file
MPEG-1 Audio
32kHz, 44.1kHz, 48kHz
32kbps ~ 320kbps (constant bit rate or variable bit rate)
The recommend recording setting for a high-quality sound is 44.1kHz of sampling frequency and 128kbps of
constant bit rate.
WMA file
WMA version 7, and 8
32kHz, 48kbps
44.1kHz, 48kbps ~ 192kbps
48kHz, 128kbps ~ 192kbps
The file recorded by mono, 48kHz, 48 kbps is not available to this unit.
Microsoft, Windows Media, and Windows Logo are trademarks or registered trademarks of Microsoft
Corporation in both the United States and other countries.
30
2F60201A [E] P27-33
30
2/22/05, 10:48 AM
0–9
CAUTION
Do not insert any foreign objects into the Media card slot as this
can result in a risk of fire or electric shock.
TOP MENU
DVD/CARD
Place a CD-R/RW on which MP3, WMA or JPEG files have
been recorded onto the disc tray or insert a Media card on
which MP3, WMA or JPEG files have been recorded into
the media card slot on the front panel.
CD
CARD
1
MP3/WMA playback
Place a CD-R/RW on which MP3 or WMA files
have been recorded onto the disc tray, or insert
a Media card on which MP3 or WMA files have
been recorded into the appropriate media card
slot on the front panel.
Note: When the Media card is inserted, the unit is
changed to the CARD mode automatically.
2
C/D/B/A
ENTER
PLAY
STOP
Press DVD/CARD to select the DVD (CD) mode or
the CARD mode.
A file menu screen will appear on the screen.
A or ENTER to select folder.
Press B/A
-/72 --:--
CD
1
2
3
4
5
6
7
Pops
8
Japan
9
Bay Bridge
CLOSE MY EYES 10
DIVE TO BLUE 11
12
Honey
13
BLUE EYES
14
Blurry Eyes
flower
Lies and Truthwinter fall
Rain
Strawberry
Welcome party
Thailand
5
Press STOP to end playback.
• The unit records the stopped point. “ ” appears
on the screen. Press PLAY to resume playback
(from the scene point).
• If you press STOP again, unload the disc or change
the DVD mode and CARD mode, the unit will clear
the stopped point.
To eject the Media card
Confirm the Media card is not in use now. Pull the card out
slowly and straight.
Note:
Do not eject the card while it is in use. If ejected while in use,
information on the card may be lost.
About file menu
/0-9/Enter/Play Mode
3
D/B
B/A
A or Number buttons (0–9) to sePress C/D
lect the desired file.
• In case the folder includes more than 15 files, press B
or A to display next file list.
-/72 --:--
CD
1
2
3
4
5
6
7
Pops
8
Japan
9
Bay Bridge
CLOSE MY EYES 10
DIVE TO BLUE 11
12
Honey
13
BLUE EYES
14
Blurry Eyes
-/72 --:--
CD
15
16
flower
Lies and Truthwinter fall
Rain
Strawberry
Welcome party
Thailand
Pops
Mother
Hold Your Last
/0-9/Enter/Play Mode
/0-9/Enter/Play Mode
• When PLAY has been pressed after displaying the file
menu, or when the disc tray has been closed using
PLAY, playback begins automatically starting from the
first file. In this case, if the first file is an MP3/WMA file,
only MP3/WMA files are played back in order. If the
first file is a JPEG file, the first JPEG file is played back.
4
Press ENTER.
The selected file starts playing back.
Notes:
• The picture menu is displayed when the FUJICOLOR CD
or the Kodak Picture CD are played. To display the file
menu, press TOP MENU.
• In the case of a CD containing a mixture of MP3, WMA and
JPEG files, the files are played back by selecting them from
the file menu.
• MP3 or WMA file on the Kodak Picture CD is not recognized on this unit.
Notes:
• During MP3/WMA/JPEG-Playback, you cannot use
SEARCH, A-B Repeat functions.
• You can use Repeat (Track or All), Random functions and
Program playback for MP3/WMA/JPEG Playback 25 26 .
• When the Media card is inserted into the both card slots, the
upper card slot is read. If you want to playback the
CompactFlash memory card, eject the Media card from the
upper card slot.
31
2F60201A [E] P27-33
31
2/22/05, 10:48 AM
Advanced playback
0–9
MP3/WMA/JPEG operation (continued)
TOP MENU
DVD/CARD
MENU
▲/▼/ /
ENTER
PLAY
STOP
SKIP /
ANGLE
PAUSE
CAUTION
Do not insert any foreign objects into the Media card slot as this can result in
a risk of fire or electric shock.
CD
CARD
1
CD
JPEG playback
CARD
Place a CD-R/RW on which JPEG files have been
recorded onto the disc tray, or insert a Media card
on which JPEG files have been recorded into the
appropriate media card slot on the front panel.
Note: When the Media card is inserted, the unit is
changed to the CARD mode automatically.
2
Press DVD/CARD to select the DVD (CD) mode or
the CARD mode. file menu screen will appear on
A to select folder.
the screen. Press B/A
3
D/B
B/A
A or Number buttons (0–9) to sePress C/D
lect the desired file.
To display a picture menu, press MENU.
(To return to a file menu, press TOP MENU.)
Press B/A or C/D to select the desired file.
• To display next list, press SKIP
/ .
• When PLAY has been pressed after displaying
the file menu, or when the disc tray has been
closed after pressing PLAY, playback begins automatically starting from the first file. In this case,
if the first file is a JPEG file, the first JPEG file is
played back. If the first file is an MP3/WMA file,
only MP3/WMA files are played back in order.
4
Press ENTER. The selected picture appears on
the screen.
Rotating an image
You can rotate an image by 90 degrees by pressing
ANGLE during playback of the image.
“
”, “
”, “
” or “
” appears briefly
on the screen.
5
JPEG slide show
The slide show enables you to view pictures (files) one after
another automatically.
Preparation:
Set “JPEG Interval” setting to “5 Seconds”, “10 Seconds”
or “15 Seconds” 36 .
1
2
Select your desired starting file for the slide
show in the step 4 as left.
Press ENTER to start slide show from the selected file.
• If you press PAUSE during the slide show, the slide
show stops temporary. “ 4 ” appears briefly on the picture.
If the picture appears upside down or sideways, press
ANGLE repeatedly until it’s right side up.
“
”, “
”, “
” or “
” appears briefly
on the screen.
again to resume the slide show.
Press PLAY or SKIP
• When the slide show playback finished the file list appears.
• To stop the slide show, press STOP. The file list appears.
To eject the Media card
Confirm the Media card is not in use now. Pull the card out
slowly and straight.
Notes:
• Do not eject the card while it is in use. If ejected while in
use, information on the card may be lost.
• If the DVD video player is connected to a HDTV using
HDMI, you can display the HD resolution JPEG images
(720p or 1080i). See “HD Jpeg” on page 37.
• When the Media card is inserted into the both card slots, the
upper card slot is read. If you want to playback the
CompactFlash memory card, eject the Media card from the
upper card slot.
Press STOP to end playback.
The file menu appears on the screen.
If you want to watch the other file, repeat steps
3 ~ 4.
32
2F60201A [E] P27-33
32
2/22/05, 10:48 AM
Customizing the function settings
You can change the default settings to customize performance
to your preference.
C/D/B/A
ENTER
RETURN
SETUP
DVD
VCD
CD
1
Setting procedure
Press SETUP during stop mode.
The following on-screen display
appears.
5
To make SETUP screen disappear, press
SETUP or RETURN.
/Enter/Setup/Return
2
Press B or A to select the desired section, then
press D or ENTER.
3
Press C or D to select the desired option.
4
Change the selection using B or A, by referring
to the corresponding pages 35~38.
• Repeat steps 3 and 4 to change
other settings.
• To select another operation, go
back to step 2 by pressing C
repeatedly.
33
2F60201A [E] P27-33
33
2/22/05, 10:48 AM
Function setup
Customizing the function settings (continued)
Setting details
Section
Option
Details
Menu
Subtitle
Audio
To select the language of “Menu”, “Subtitle” and
“Audio” if more than one language are available on
the disc .
OSD
To select a preferred language for on screen display.
E.B.L.
To select On or Off for E.B.L. (Enhanced Black
Level).
TV Screen
To select a picture size according to the aspect
ratio of your TV.
Display
To turn on or de-activate the operational status display on the screen.
Picture Mode
To select a preferred picture mode from “Video”,
“Film” or “Auto”.
JPEG Interval
To select a preferred setting for the slide show playback.
Dialogue
To select On or Off for DRC (Dynamic Range Control).
QSound
To select On or Off for QSound.
Digital Out
To select an output sound format corresponding to
your system connection.
Password
Input 4-digit password to set the parental level.
Parental
To select a preferred parental level for the parental
setting.
Select Files
To select a preferred file type for playing back a CD
containing a mixture of file types.
HD Jpeg
To select On or Off for HD Jpeg
Output
To select a preferred video output signal from “Progressive” or “Interlace”.
Page
35
36
37
34
2F60201A [E] P34-38
34
2/22/05, 10:48 AM
38
Menu
Subtitle
Audio
OSD
##
!
" ##
$$%
English
English
English
English
/Setup/Return
Menu, Subtitle, Audio
E.B.L.
You can select the language of “Menu”, “Subtitle” and
“Audio” if more than one languages are recorded onto
the disc.
To select the black level of playback pictures, set your
preference and monitor’s ability.
On: Enhanced grey scale (0 IRE cut off)
English, Francais, Espanol:
The selected language will be heard or seen.
Other:
Other language can be selected (see the
“Language code list” on page 40).
Original: (Audio)
The unit will select the first priority language of
each disc.
Off: (Subtitle)
Subtitles do not appear.
Note:
If the selected language is not recorded on the disc, the firstpriority language is selected.
OSD
The setup language can be selected.
English: To display OSD language in English.
Francais: To display OSD language in French.
Espanol: To display OSD language in Spanish.
Off: Standard grey scale (7.5 IRE cut off)
Note:
In HDMI connection, this function does not work.
TV Screen
You have the following screen sizes to choose from:
4:3
Letter box:
Select this mode when connecting to a conventional TV. When playing back a wide screen-DVD
disc, it displays the wide picture with black bands
at the top and bottom of screen.
Pan scan:
4:3
It displays the wide picture on the whole screen
with left and right edges automatically cut off.
Wide:
16:9
Select this mode when connecting to a widescreen TV. A wide screen picture is displayed full
size.
Press OPEN/CLOSE to view in the selected screen size.
Note:
If the DVD disc is not formatted in the pan & scan style, it
displays 4:3 style.
Display
On screen display can be switched on or off when you
press the buttons.
On: On screen displays appear when you press
the buttons (factory setting).
Off: On screen displays do not appear when you
press any buttons.
35
2F60201A [E] P34-38
35
2/22/05, 10:48 AM
Function setup
Customizing the function settings (continued)
Setting details
Picture Mode
There are two types of source content in pictures
recorded in DVD video discs: film content (pictures
recorded from films at 24 frames per second) and
video content (video signals recorded at 30 frames per
second). Make this selection according to the type of
content being viewed.
Auto:
Select this position normally.
The DVD player automatically detects source
content, film or video, of playback source, and
converts that signal in the progressive output
format in an appropriate method.
Film:
The DVD player converts film content pictures
in the progressive output format appropriately.
Suitable for playback of film content pictures.
The progressive output feature will be most
effective under this selection.
Video:
The DVD player filters video signal, and
converts it in the progressive output format
appropriately.
Suitable for playback of video content pictures.
Note:
Depending on the disc, pictures may be cut off or doubled.
In this case, select “Video”.
JPEG Interval
Dialogue
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound for
your equipment.
On: DRC (TV):
Loud sound such as explosion or similar is toned
down slightly when played back. This makes it
suitable for when it is connected to a stereo.
Off: DRC (Std):
It plays back at the recording level on the disc.
Notes:
• This function works only during playback of Dolby Digital
recorded discs.
• The level of Dynamic Range Reduction may differ
depending on DVD video disc.
QSound
This DVD video player equipped with a “QSound”. It can
produce the effect of being in a cinema or a concert hall.
On: The QSound operates.
You can continuously play back all JPEG files automatically.
After the setting below, start playing the disc on which
JPEG files have been recorded.
Off:
Plays back one file at a time.
5 Seconds:
Plays back images in the form of a slide show at
5 second intervals.
10 Seconds:
Plays back images in the form of a slide show at
10 second intervals.
15 Seconds:
Plays back images in the form of a slide show in
15 second intervals.
Off: The QSound is disengaged.
Note:
The QSound setting can also be changed with AUDIO on
the remote control. (See page 28.)
Digital Out
Selected the output sound format corresponding to your
system connection.
PCM:
Select when connected to a 2 channel digital
stereo amplifier.
Raw:
Disc audio raw data will be output.
Notes:
• When you make a connection to a TV, or Dolby
Surround Pro Logic or stereo system via the analog
audio jacks, select "PCM" or "Raw".
• If apply HDMI connection to TV, make sure to select
"PCM", audio signal passing to TV via HDMI cable.
36
2F60201A [E] P34-38
36
2/22/05, 10:48 AM
Password
---Parental
Off
Select Files
All
HD Jpeg
Off
Output
Interlace
/0-9/Enter/Clear/Setup/Return
If you forget the password...
1. Press OPEN/CLOSE to open the disc tray.
2. Remove the disc.
3. Press OPEN/CLOSE again to close the disc tray.
“No Disc” appears on the screen.
4. While holding STOP down on the front panel,
press 7 on the remote control. “PASSWORD
CLEAR” appears on the screen.
5. Enter a new password again.
Parental control setting
Select Files
Some discs are specified not suitable for children.
Such discs can be limited not to play back with the
unit.
1) Press C or D to select “Parental”, then press B
or A until the level you require appears.
• Level Off: The parental control setting does not
function.
• Level 8: All DVD software can be played back.
• Level 1: DVD software for adults cannot be
played back.
Select from the level 1 to level 8. The limitation will
be more severe as the level number is lower.
2) Press C or D to select “Password”.
Press Number buttons (0–9) to input a 4-digit
password. Be sure to remember this number!
• If you input a wrong number, press CLEAR.
3) Press ENTER to store the password.
Note: Now the rating is locked and the setting cannot be changed unless you enter the correct pass
word.
4) Press OPEN/CLOSE to activate Parental control
setting. (See “Temporary disabling of rating level by
DVD disc” on page 39.)
Notes:
• Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with specific rating
level information though its disc jacket says “adult.” For
those discs, the age restriction will not work.
To change the parental level
1) Press C or D to select “Password”.
2) Press Number buttons (0–9) to enter the password
you have stored.
3) Press ENTER.
• The rating is now unlocked.
4) Press C or D to select “Parental”, then press B or
A to change the parental level.
5) Press C or D to select “Password”, then press
Number buttons (0–9) to enter the password.
Note: You can change the password if you want.
6) Press ENTER.
Now the parental level is changed and locked.
When playing back a CD or Media card containing a
mixture of MP3, WMA and JPEG files, only MP3/WMA
or JPEG files can be displayed on the file menu.
All:
Displays all files.
Music Only:
Displays only MP3/WMA files.
Pictures Only:
Displays only JPEG files.
HD Jpeg
This DVD video player equipped with a “HD Jpeg”. It can
display the HD resolution JPEG images when the DVD
video player is connected to a HDTV using HDMI.
On:
Select when you connect the DVD video player to
a HDTV via HDMI OUT jack. JPEG images is displayed in suitable picture quality (480p, 720p or
1080i). See page 17.
Off:
The picture processing quality is fixed to 480p.
Notes:
• When the DVD video player is not connected to a TV
using HDMI, you cannot select “On”.
• When HD Jpeg is set to “On”, zoom function is prohibited
and component video outputs disabled when 720p or
1080i is selected.
37
2F60201A [E] P34-38
37
2/22/05, 11:13 AM
Function setup
Customizing the function settings (continued)
Setting details
Output
You can select the video output signal of the DVD
video player to the TV from “Interlace” or “Progressive”.
1)
2)
Press C or D to select “Output”.
Press A, then press C or D to select “Interlace”
or “Progressive”.
Interlace:
Select when connecting to a composite TV or
a TV equipped with component video inputs
but progressive scan is not compatible.
Progressive:
Select when connecting to a TV equipped
with component video inputs, progressive scan
compatible.
3)
Press ENTER.
Warning:
Once “Progressive” is selected when connecting to
a TV progressive scan incompatible, no image will
be seen on the video display.
In this case, you must reset the unit by pressing
STOP on the front panel for five seconds. The video
output will be restored to “Interlace” setting, and a
picture will once again be seen on a conventional
analog display.
Notes:
• Some discs may not be played back with the progressive
scanning mode correctly because of the disc characteristics or recording condition.
• Once Progressive scan on, all other video outputs are
disabled except component video outputs.
Note:
If each setup (pages 35~38) has been completed, the unit
can always be worked under the same conditions
(especially with DVD discs).
Each setup will be retained in the memory even if you
turn the power off.
38
2F60201A [E] P34-38
38
2/22/05, 10:48 AM
OPEN/CLOSE
0–9
Temporary disabling of rating level by DVD disc
Depending on the DVD disc, the disc may try to temporarily cancel the rating
level that you have set.
It is up to you to decide whether to cancel the rating level or not.
▲/▼
ENTER
RETURN
PLAY
1
Load a DVD disc and press PLAY or OPEN/
CLOSE on the unit (see page 20).
4
Enter the password with Number buttons (0–9).
Then press ENTER.
To exit from the entry, press RETURN.
Please enter the
4 - digit password
Enter/0 9/Clear/Return
2
If the DVD disc has been designed to temporarily
cancel the Rating level, the screen which follows
the “Reading Disc” screen will change, depending on which disc is played. If you select “YES”
with the ENTER key, “Your disc exceeds the
parental control level#.” screen will then appear.
Reading Disc
Your disc exceeds
the parental control level#.
Parental Control Level
Cancel Picture
/Enter/Return
3
5
Playback will commence if the entered password was correct.
Note:
This temporary cancellation of rating level will be kept until the
disc is ejected.
When the disc is ejected, the original rating level will be set again
automatically.
If you wish to cancel the set rating level temporarily, select “Parental Control Level” with C or D, then
press ENTER. If the 4-digit password at step 2 on
page 37 has been set, the password entering screen
will appear as shown in step 4.
Alternatively, if the password has not been set, playback will commence. If you don’t know (or have
forgotten) the password, select “Cancel Picture”.
The setting screen will disappear. Press OPEN/
CLOSE to remove the disc.
39
2F60201A [E] P39-43
39
2/22/05, 10:48 AM
Function setup
Language code list
Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” (see page 35).
Language Name Code
Language Name Code
Language Name Code
Language Name Code
Abkhazian
1112
Fiji
1620
Lingala
2224
Singhalese
2919
Afar
1111
Finnish
1619
Lithuanian
2230
Slovak
2921
Afrikaans
1116
French
1628
Macedonian
2321
Slovenian
2922
Albanian
2927
Frisian
1635
Malagasy
2317
Somali
2925
Amharic
1123
Galician
1722
Malay
2329
Spanish
1529
Arabic
1128
Georgian
2111
Malayalam
2322
Sundanese
2931
Armenian
1835
German
1415
Maltese
2330
Swahili
2933
Assamese
1129
Greek
1522
Maori
2319
Swedish
2932
Aymara
1135
Greenlandic
2122
Marathi
2328
Tagalog
3022
Azerbaijani
1136
Guarani
1724
Moldavian
2325
Tajik
3017
Bashkir
1211
Gujarati
1731
Mongolian
2324
Tamil
3011
Basque
1531
Hausa
1811
Nauru
2411
Tatar
3030
Bengali; Bangla 1224
Hebrew
1933
Nepali
2415
Telugu
3015
Bhutani
1436
Hindi
1819
Norwegian
2425
Thai
3018
Bihari
1218
Hungarian
1831
Oriya
2528
Tibetan
1225
Breton
1228
Icelandic
1929
Panjabi
2611
Tigrinya
3019
Bulgarian
1217
Indonesian
1924
Pashto, Pushto 2629
Tonga
3025
Burmese
2335
Interlingua
1911
Persian
1611
Turkish
3028
Byelorussian
1215
Irish
1711
Polish
2622
Turkmen
3021
Cambodian
2123
Italian
1930
Portuguese
2630
Twi
3033
Catalan
1311
Japanese
2011
Quechua
2731
Ukrainian
3121
Chinese
3618
Javanese
2033
Rhaeto-Romance2823 Urdu
3128
Corsican
1325
Kannada
2124
Romanian
2825
Uzbek
3136
Croatian
1828
Kashmiri
2129
Russian
2831
Vietnamese
3219
Czech
1329
Kazakh
2121
Samoan
2923
Volapük
3225
Danish
1411
Kirghiz
2135
Sanskrit
2911
Welsh
1335
Dutch
2422
Korean
2125
Scots Gaelic
1714
Wolof
3325
English
1524
Kurdish
2131
Serbian
2928
Xhosa
3418
Esperanto
1525
Laothian
2225
Serbo-Croatian 2918
Yiddish
2019
Estonian
1530
Latin
2211
Shona
2924
Yoruba
3525
Faroese
1625
Latvian, Lettish 2232
Sindhi
2914
Zulu
3631
40
2F60201A [E] P39-43
40
2/22/05, 10:48 AM
TV
POWER
Multi brand remote control
0–9
The remote control can be compatible with various brands of TV by
setting their control codes. The TOSHIBA code has initially been set
to control TOSHIBA TVs.
100
DISPLAY
INPUT SELECT
PROGRAM
VOL +/–
ENTER
CH
/
Setting TV control codes
1
Press TV to set the remote control operating
your TV.
2
While holding down PROGRAM enter the two
digits of your TV's brand code (listed on the
right) using Number buttons (0–9), then release
PROGRAM.
Point the remote control at your TV and use each
button listed below to make sure that your TV is
operated correctly.
POWER
/
CH
VOL +/–
INPUT SELECT
Number buttons
(0–9)
100
DISPLAY
ENTER
To turn the TV on or off.
To select TV channels in the upper
or lower direction.
To adjust the sound level.
To select an external source such
as a VCR.
To select TV channels. When selecting channels 1 to 9, first enter 0 and
then desired number.
To substitute for 100 channel key.
To turn on or off TV’s screen display.
To use for the TV’s ENTER key.
Important
Some TV’s may not respond to all the operations left, or
may not be operated at all with this remote control. In this
case, operate your TV with its own remote control.
Table of TV brand codes
Brand name
of your TV
Toshiba
Bell & Howell
Carver
Celebrity
Citizen
Curtis Mathes
Dumont
Electro band
Emerson
Fisher
GE
Gibralter
Goldstar
Hallmark
Hitachi
Infinity
JBL
JCB
JVC
LXI
Magnavox
Marantz
Megatron
Memorex
MGA
Midland
Mitsubishi
Motorola
MTC
NAD
Nikko
Optimus
Optonica
Panasonic
Brand Code
01
09
10
03
12
09, 12
14
03
09,11
09
02, 07, 11
14
11
11
06
10
10
03
05
01, 02, 09, 10, 11
10
10
06, 11
04, 09, 11
04, 11
02, 07, 14
04, 11
08
12
01, 11
11
09
08
07, 10, 15
Brand name
of your TV
Penney
Philco
Philips
Pioneer
Princeclub
Prism
Proscan
Proton
Pulser
Quasar
Radio Shack
RCA
Realistic
Runco(NEC)
Samsung
Sanyo
Scotch
Scott
Sears
Sharp
Sony
Soundesign
Supreme
Sylvania
Tandy
Technics
Techwood
Teknika
TMK
Victor
Vidikron
Vidtech
Wards
Zenith
Brand Code
01, 02, 07, 11, 12
10
10
16
12
07
02
11
14
07, 15
13
02
09, 11, 13
14
11, 12
09
11
11
01, 02, 09, 10, 11
08, 13
03
11
03
10
08
07, 15
07
04,10,12
11
05
10
11
10, 11,13
14
Notes:
• For some brands, several control codes (brand codes) are allocated. Try each of them until the buttons work on your TV.
• If you replace the remote control’s batteries, set the brand code
again.
41
2F60201A [E] P39-43
41
2/22/05, 10:48 AM
Others
Troubleshooting guide
Check the following guide for the possible cause of a problem before contacting service.
Page
Symptom
Cause
Correction
No power.
• The power plug is disconnected.
• Connect the power plug securely into the
wall outlet.
15
No picture.
• The TV is not set to receive DVD signal
output.
• Select the appropriate video input mode
on the TV so the picture from the DVD
video player appears on the TV screen.
–
• The video cable is not connected securely.
• Connect the video cable securely into the
15, 16
appropriate jacks.
• The output setting is not set correctly.
• Set the output setting to the appropriate
mode.
• The output setting is set to the
Progressive mode though the unit is
connected to a TV via the VIDEO out or
the S-VIDEO out jack.
• Set the output setting to the Interlace
mode.
• The equipment connected with the audio
cable is not set to receive DVD signal
output.
• Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD video player.
–
• The audio cable is not connected securely.
• Connect the audio cable securely into
the appropriate jacks.
15~19
• The audio receiver or TV is turned off.
• Turn on the equipment connected with
the audio cable.
–
• The unit is in the advanced playback mode.
• Resume the normal playback.
• The disc is dirty.
• Eject the disc and clean it.
8
• It is in fast forward or fast reverse
playback.
• Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
–
Brightness is unstable or
noises are present in the
playback pictures.
• The effect of copy protection.
• Connect the DVD video player directly to
the TV. Avoid connecting the DVD video
player to a VCR or TV/VCR combination.
15
The DVD video player does
not start playback.
• No disc is inserted.
• Insert a disc.
20
• An unplayable disc is inserted.
• Insert a playable disc. (Check the disc
type and color system.)
9
• The disc is placed upside down.
• Place the disc with the playback side
down.
20
• The disc is not placed within the guide.
• Place the disc correctly inside the guide
on the disc tray.
20
• The disc is dirty.
• Clean the disc.
• The parental lock function is set.
• Cancel the parental lock function or
change the parental lock level.
•
• The function is prohibited with the unit or
the disc.
9
• It is in the mode of repeat playback,
program playback, etc.
• These operations may prevent a proper
progress of the contents.
–
• Power supply fluctuations or other
abnormalities such as static electricity
may interrupt correct operations.
• Turn the power on or off with ON/
STANDBY.
Or disconnect the power plug and insert
it into the wall outlet again.
–
• The remote control is not pointed at the
remote sensor of the DVD video player.
• Point the remote control at the remote
sensor of the DVD video player.
14
• The remote control is too far from the DVD
video player.
• Operate the remote control within approx.
7 m.
14
• The batteries in the remote control are
exhausted.
• Replace the batteries with new ones.
No picture, or the screen is
blurred or divided into two
parts.
No sound.
The playback picture has
occasional distortion.
Playback does not follow the
course of the disc’s program.
Buttons do not work.
The remote control does not
work properly.
appears on the screen.
42
2F60201A [E] P39-43
42
2/22/05, 10:48 AM
38
38
22
8
37
14
Specifications
DVD Video Player
Power supply
120 V AC, 60 Hz
Power consumption
Operation : 12 W
Standby : 3.8 W
Mass
4.4 lbs (2.0 kg)
External dimensions
Width : 16 - 15/16 inches (430mm)
Height : 1 - 7/8 inches (47mm)
Depth : 8 - 1/16 inches (205mm)
Signal system
Standard NTSC
Pickup
CD :
Wavelength: 775 - 815 nm
Maximum output power: 0.5 mW
DVD : Wavelength: 650 - 666 nm
Maximum output power: 2.0 mW
Frequency response
DVD : 4 Hz - 22 kHz
CD : 4 Hz - 20 kHz
Harmonic distortion
0.008 %
Wow and flutter
Below measurable level
Operating conditions
Temperature: 5 °C to 40 °C, Operation status: Horizontal
Outputs
Video output
1.0 V (p-p), 75 Ω, negative sync., pin jack x 1
S-video output
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x 1
(C) 0.286 V (p-p), 75 Ω
Component video output
(Y) 1.0 V (p-p), 75 Ω, negative sync., pin jack x 1
(PB)/(PR) 0.7 V (p-p), 75 Ω, pin jack x 2
Audio output (DIGITAL COAXIAL)
0.5V (p-p), 75 Ω, pin jack x 1
Audio output (DIGITAL OPTICAL)
Optical connector x 1
Audio output (ANALOG)
–12 dBm, 1k Ω, pin jacks (L, R) x 1
Supplied Accessories
Audio/video cable ................................................. 1
HDMI cable ........................................................... 1
Remote control (SE-R0169) ................................. 1
Batteries (R03/AAA) ............................................. 2
• This model complies with the above specifications.
• Designs and specifications are subject to change without notice.
• This model may not be compatible with features and/or specifications that may be added in the future.
43
2F60201A [E] P39-43
43
2/22/05, 10:48 AM
Others
Limited warranty
Limited United States Warranty
DVD Players - Exchange Warranty
Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original consumers in
the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR
ANY PERSON RECEIVING THIS DVD PLAYER AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER
AND TO NO OTHER PURCHASER OR TRANSFEREE.
PRODUCTS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING,
WITHOUT LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.
PRODUCTS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION,
CANADA AND MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES.
Limited Ninety (90) Day Warranty
TACP warrants this DVD Player and its parts against
defects in materials or workmanship for period of ninety
(90) days after the date of original retail purchase.
DURING THE FIRST NINETY (90) DAYS AFTER THE
DATE OF ORIGINAL RETAIL PURCHASE, TACP WILL
EXCHANGE A DEFECTIVE DVD PLAYER WITH A
NEW OR REFURBISHED DVD PLAYER WITHOUT
CHARGE TO YOU. YOU MUST CONTACT TACP’S
CONSUMER SOLUTIONS CENTER FOR
INSTRUCTIONS ON HOW TO PROCESS YOUR IN
WARRANTY EXCHANGE REQUEST. THE
CONSUMER IS RESPONSIBLE FOR ALL INBOUND
TRANSPORTATION AND INSURANCE CHARGES
FOR THE DVD PLAYER TO THE EXCHANGE
CENTER. DURING THE PERIOD THAT COMMENCES
ON THE DATE THAT IS NINETY ONE (91) DAYS
AFTER THE DATE OF ORIGINAL RETAIL PURCHASE
AND BEYOND, TACP WILL EXCHANGE A
DEFECTIVE DVD PLAYER WITH A NEW OR
REFURBISHED DVD PLAYER FOR A NOMINAL FEE.
YOU MUST CONTACT TACP’S CONSUMER
SOLUTIONS CENTER FOR INSTRUCTIONS ON HOW
TO PROCESS YOUR EXCHANGE REQUEST. THE
CONSUMER IS RESPONSIBLE FOR ALL INBOUND
TRANSPORTATION AND INSURANCE CHARGES
FOR THE DVD PLAYER TO THE EXCHANGE
CENTER.
Rental Units
The warranty for rental units begins with the first rental or
thirty (30) days after the date of shipment to the rental
firm, whichever comes first.
Commercial Units
DVD Players sold and used for commercial purposes
have a limited ninety (90) day warranty for all parts and
labor.
Owner’s Manual and Product Registration Card
Read this owner’s manual thoroughly before operating
this DVD Player. Complete and mail the enclosed
product registration card or register your product on-line
at www.tacp.toshiba.com/service as soon as possible. By
registering your DVD Player you will enable TACP to
bring you new products specifically designed to meet
your needs and help us to contact you in the unlikely
event that a safety notification is required under the
Consumer Product Safety Act. Failure to complete and
return the product registration card does not diminish
your warranty rights.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE
FOLLOWING CONDITIONS:
(1) You must retain your bill of sale or provide other
proof of purchase.
(2) All warranty servicing of this product must be made
by an Authorized TACP Service Station.
(3) The warranties from TACP are effective only if the
product is purchased and operated in the
Continental U.S.A. or Puerto Rico.
(4) Labor service charges for set installation, setup,
adjustment of customer controls and installation or
repair of antenna systems are not covered by this
warranty. Reception problems caused by
inadequate antenna systems are your responsibility.
(5) Warranties extend only to defects in materials or
workmanship as limited above, and do not extend to
any DVD Player or parts that have been lost or
discarded by you or to damage to the DVD Player or
parts caused by fires, misuse, accident, Acts of God
(such as lightning or fluctuations in electric power),
improper installation, improper maintenance, or use
in violation of instructions furnished by TACP; use or
malfunction through simultaneous use of this
product and connected equipment; or to units that
have been modified or had the serial number
removed, altered, defaced, or rendered illegible.
44
2F60201A [E] P43-BACK
44
2/22/05, 10:49 AM
How to Obtain Warranty Services
If, after following all of the operating instructions in this
manual and checking the section “Troubleshooting,” you
fund that service is needed:
(1)
For instructions on how to obtain warranty service
for exchange program DVD Players, contact TACP’s
Call Center toll free at 1-866-583-7353.
(2)
You must include the original bill of sale (or a copy of
the original bill of sale) or other proof of purchase
along with the entire DVD Player when sending the
DVD Player to the Authorized TACP Service Station
specified by TACP’s Call Center. You must pay for
all transportation and insurance charges for the DVD
Player to and from the Authorized TACP Service
Station.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS
WHICH MAY VARY FROM STATE TO STATE IN THE
U.S.A. SOME STATES OF THE U.S.A. DO NOT
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, WHEN AN ACTION MAY BE
BROUGHT, OR THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THE ABOVE PROVISIONS MAY NOT APPLY TO YOU
UNDER SUCH CIRCUMSTANCES.
For additional information, visit TACP’s website:
www.tacp.toshiba.com
ALL WARRANTIES IMPLIED BY THE LAW OF ANY
STATE OF THE U.S.A., INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE EXPRESSLY
LIMITED TO THE DURATION OF THE LIMITED
WARRANTIES SET FORTH ABOVE. WITH THE
EXCEPTION OF ANY WARRANTIES IMPLIED BY THE
LAW OF ANY STATE OF THE U.S.A. AS HEREBY
LIMITED, THE FOREGOING WARRANTY IS
EXCLUSIVE AND IN LIEU OF ALL OTHER
WARRANTIES, GUARANTEES, AGREEMENTS, AND
SIMILAR OBLIGATIONS OF TACP WITH RESPECT TO
THE REPAIR OR REPLACEMENT OF ANY PARTS. IN
NO EVENT SHALL TACP BE LIABLE FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, LOST PROFITS,
BUSINESS INTERRUPTION, OR MODIFICATION OR
ERASURE OF RECORDED DATA CAUSED BY USE,
MISUSE OR INABILITY TO USE THIS PRODUCT).
No person, agent, distributor, dealer or company is
authorized to change, modify or extend the terms of
these warranties in any manner whatsoever. The time
within which an action must be commenced to enforce
any obligation of TACP arising under the warranty or
under any statute, or law of the United States or any
state thereof, is hereby limited to ninety (90) days from
the date you discover or should have discovered, the
defect. This limitation does not apply to implied
warranties arising under state law.
45
2F60201A [E] P43-BACK
45
2/22/05, 10:49 AM
Memo
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
2F60201A [E] P43-BACK
46
2/22/05, 10:49 AM
Memo
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
2F60201A [E] P43-BACK
47
2/22/05, 10:49 AM
Printed in Thailand
J2F60201A SH 05/03 K
2F60201A [E] P43-BACK
48
2/22/05, 10:49 AM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement