Toshiba SD-3107

Toshiba SD-3107
TOSHIBA
COMPACT
™ DIGITAL AUDIO
DVD VIDEO PLAYER
SD-3107
VWINER'S MANUAL
4B SPATIALIZER *
N 3-D STEREO
79070229
9876103300
jo
=
С ий
©
Le)
|
A
pari
=
m
how
LL
i
SAFETY PRECAUTION
ERRE ER RE RT nn Ren
WARNING
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE NE
AVIS PAS OUVRIR
QUALIFIED SERVICE PERSONNEL.
within the product's enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
| WARNING The lightning flash with arrowhead symbol, within an equilateral triangle, is
RISK OF ELECTRIC SHOCK intended to alert the user to the presence of uninsulated “dangerous voltage”
WARNING : TO REDUCE THE RISK OF mati int withi : ны
ELECTRIC SHOCK, DO NOT REMOVE The exclamation point wit inan equilateral triangle is intended to alertthe user
COVER (OR BACK). NO USERSERVICEABLE to the presence of important operating and maintenance (servicing) instruc-
PARTS INSIDE. REFER SERVICING TO tions in the literature accompanying the appliance.
WARNING:
CAUTION:
ATTENTION:
CAUTION:
FCC NOTICE:
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE
CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
POUR EVITER LES CHOCS ELECTRIQUE, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’ AU FOND.
This Digital Video Disc Player employs a Laser System.
To ensure proper use of this product, please read this owner's manual carefully and retain for future
reference. Should the unit require maintenance, contact an authorized service location - see service
procedure.
Use of controls, adjustments or the performance of procedures other than those specified may result herein
hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure.
Visible laser radiation when open and interlocks defeated.
DO NOT STARE INTO BEAM.
This equipment has been tested and found to comply with the limits for a Class B digita! device,
pursuant to part 15 of the FCC Rule. These límits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications made to this equipment, not expressly approved by Toshiba, or parties
authorized by Toshiba, could void the user's authority to operate the equipment. |
In the spaces provided below, record the Model and Serial No. located on the rear panel of your DVD video player.
Model No.
Serial No.
Retain this information for future reference.
Location of the required label
ss E ES MA as ue
IE
PRODUCT IS CERTIFIED BY THE MANUFACTURER
TO COMPLY WITH DHHS RULES 21 CFR SUBCHAPTER J
APPLICABLE AT THE DATE OF MANUFACTURE,
MANUFACTURED
TOSHIBA AMERICA CONSUMER PRODUCT, INC
82 TOTOWA RD., WAYNE, NJ 07470, U.S.A.
or
PRODUCT IS CERTIFIED BY THE MANUFACTURER
TO COMPLY WITH DHHS RULES 21 CFR SUBCHAPTER J
APPLICABLE AT THE DATE OF MANUFACTURE.
MANUFACTURED
TOSHIBA OF CANADA, LTD.
191 McNABB ST., MARKHAM, ONTARIO, L3R 8H2, CANADA
PORTANT SAFET
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND
THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard.
The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing.
This unit is fully transistorized and does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL ONLY.
1.
Read owners manual . ,
After unpacking this product, read - a
the owner's manual carefully, and NX La >
follow all the operating and other
instructions. —
Power Sources
This product should be operated
only from the type of power source
indicated on the marking label. If
you are not sure of the type of
power supply to your home, con-
sult your product dealer or local
power company. For products in-
tended to operate from battery power, or other sources, refer
to the operating instructions.
3. Grounding or Polarization
This product may be equipped with
a polarized alternating current line
plug (a plug having one blade wider
than the other). This plug will fit into
the power outlet only one way. This
is a safety feature. If you are un-
able to insert the plug fully into the
outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
. Ventilation
Slots and openings in the cabinet
are provided for ventilation and to
ensure reliable operation of the
product and to protect it from over-
heating, and these openings must
not be blocked or covered. The
openings should never be blocked
by placing the product on a bed, sofa, rug or other similar
surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper venti-
lation is provided or the manufacturers instructions have
been adhered to.
10.
Heat
The product should be situated
away from heat sources such as
radiators, heat registers, stoves,
or other products (including am-
plifiers) that produce heat.
Water and Moisture
Do not use this product near wa-
ter - for example, near a bath tub,
wash bowl, kitchen sink, or laun-
dry tub; in a wet basement; or
near a swimming pool and the
like.
Cleaning
Unplug this product from the wall
outlet before cleaning. Do not use
liquid cleaners or aerosol clean-
ers. Use adamp cloth for cleaning.
Power-Cord Protection
Power-supply cords should be
routed so that they are not likely to
be walked on or pinched by items
placed upon or against them, pay-
ing particular attention to cords at
plugs, convenience receptacles,
and the point where they exit from
the product.
Overloading
Do not overload wall outlets; ex-
tension cords, or integral
convenience receptacles as this
can result in a risk of fire or electric
shock.
Lightning
For added protection for this prod-
uct during storm, or when it is left
unattended and unused for long
periods of time, unplug it from the
wall outlet. This will prevent dam-
age to the product due to lightning
and power-line surges.
11.
12.
13.
14.
15.
Object and Liquid Entry
Never push objects of any kind into
this product through openings as
they may touch dangerous voltage
points or short-out parts that could
result in a fire or electric shock.
Never spill liquid of any kind on the
product.
Attachments
Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
Accessories
Do not place this product on an
unstable cart, stand, tripod,
bracket, or table. The product may
fall, causing serious injury to a
child or adult, and serious damage
tothe product. Use only with a cart,
stand, tripod, bracket, or table rec-
ommended by the manufacturer,
or sold with the product. Any mounting of the product should
follow the manufacturer's instructions, and should use a
mounting accessory recommended by the manufacturer.
A product and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may
cause the product and cart combination to overturn.
AI
S31254
„2
Disc Tray >
Keep your fingers well clear of the ON
disc tray as it is closing. It may
cause serious personal injury. x
Burden
Do not place a heavy object on or
step on the product. The object
may fall, causing serious personal
injury and serious damage to the
product.
16.
17.
18.
19.
20.
Headphones
When you use the head-
phones, keep the volume at a
moderate level. If you use the
headphones continuously with
high volume sound, it may
cause hearing damage.
Disc
Do not use a cracked, de-
formed, or repaired disc. These
discs are easily broken and
may cause serious personal
injury and product malfunction.
Damage Requiring Service
Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen into the
product.
C) If the product has been exposed to rain or water.
а) If the product does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adjustment of other controls may result in damage and
will often require extensive work by a qualified technician
to restore the product to its normal operation.
e) If the product has been dropped or damaged in any way.
f) When the product exhibits a distinct change in per-
formance - this indicates a need for service.
Servicing
Do not attempt to service this
product yourself as opening or
removing covers may expose you
todangerous voltage or otherhaz-
ards. Refer all servicing to
qualified service personnel.
Replacement Parts
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original
part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
21. Safety Check
Upon completion of any service or
repairs to this product, ask the
service technician to perform
safety checks to determine that
the product is in proper operating
condition.
Ш
аи
|<)
O
:
=
4 un
Introduction )
Precautions
Notes on Handling
When shipping the DVD video player, the original shipping
carton and packing materials come in handy. For maximum
protection, repack the unit as it was originally packed at the
factory.
Do not use volatile liquids, such as insect spray, near the
DVD video player. Do not leave rubber or plastic products
in contact with the DVD video player for a long time. They
will leave marks on the finish.
The top and rear panels of the DVD video player may
become warm after a long period of use. This is not a
malfunction.
When the DVD video player is not in use, be sure to
remove the disc and turn off the power.
If you do not use the DVD video player for a long period,
the unit may not function properly in the future. Turn on and
use the DVD video player occasionally.
Notes on Locating
M When you place this DVD video player near a TV, radio, or
VCR, the playback picture may become poor and the
sound may be distorted. In this case, place the DVD video
player away from the TV, radio, or VCR.
Notes on Cleaning
Use a soft, dry cloth for cleaning.
@ For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe it dry.
Do not use any type of solvent, such as thinner and
benzine, as they may damage the surface of the DVD video
player.
O If you use a chemical saturated cloth to clean the unit,
follow that product’s instructions.
To Obtain a Clear Picture
The DVD video player is a high technology, precision device. If
the optical pick-up lens and disc drive parts are dirty or worn
down, the picture quality becomes poor. To obtain a clear
picture, we recommend regular inspection and maintenance
(cleaning or parts replacement) every 1,000 hours of use
depending on the operating environment. For details, contact
your nearest dealer.
Notes on Moisture Condensation
Moisture condensation damages the DVD video
player. Please read the following carefully.
Moisture condensation occurs, for example, when you pour a
cold drink into a glass on a warm day. Drops of water form on
the outside of the glass. In the same way, moisture may
condense on the optical pick-up lens inside this unit, one of
the most crucial internal parts of the DVD video player.
examples of moisture
() О condensation #
о |
Optical
HB Moisture condensation occurs during the
following cases.
@ When you bring the DVD video player directly from a cold
place to a warm place.
e When you use the DVD video player in a room where you
just turned on the heater, or a place where the cold wind
from the air conditioner directly hits the unit.
O In summer, when you use the DVD video player in a hot
and humid place just after you move the unit from an air
conditioned room.
@ When you use the DVD video player in a humid place.
it's too
warm!
Y
444
H Do not use the DVD video player when moisture
condensation may occur.
If you use the DVD video player in such a situation, it may
damage discs and internal parts. Remove the disc, connect
the power cord of the DVD video player to the wall outlet,
turn on the DVD video player, and leave it for two or three
hours. After two or three hours, the DVD video player will
have warmed up and evaporated any moisture. Keep the
DVD video player connected to the wall outlet and moisture
condensation will seldom occur.
Introduction )
Table of Contents
Introductio
E SAFETY PRECAUTIONS -................—.—. 1 E Identification of Controls .................—... 7-10
E IMPORTANT SAFETY Front Panel/Rear Panel/DVD display
Remote Control
INSTRUCTIONS мивочинкаишнаянонесннончнвисенанвинень 2-4 Preparing the Remote Control
E Precautions ....................— eee 5 Operating with the Remote Control
& Connections
EM Connecting to à TV er 11 H Connecting to Optional Equipment … 13, 14
M Connecting to an Audio System and TV with Enloying Y Dota AY Sound, 3
njoying Dolby Pro Logic Surround Soun
ColorStream™ (color difference) Inputs ......... 12 Enjoying 2 Channel Digital Stereo Sound
Basic Playback
E Playing Back a Disc .................e.e....... 15-18
Basic Playback
Playing at x2, x8 or x30 the Normal Speed
Playing Frame by Frame
Playing in Slow-Motion
Resuming Playback from the Same Location
Locating a Title Using the Title Menu
Locating a Title |
Locating a Specific Chapter or Track Directly
Locating a Specific Chapter or Track
Locating a Specific Location Within a Title
Repeating a Title, Chapter, or Track
Repeating a Specific Segment
MB Playing in a Favorite Order ..................... 22
Setting Titles, Chapters, or Tracks in a Favorite Order
Ш Zooming a Picture /
Playing 3-Dimensional Sound................. 23
Zooming a Picture
Playing 3-Dimensional Sound
Displaying the SET UP MENU Screen
Setting the Audio Sound
Setting the Function Modes
Setting the Displays
№ Setting the Parental Lock.................. 35, 36
Setting the Parental Lock
E Selecting the Camera Angle ................... 24
E Selecting a Language ......................=—..—. 25
E Selecting Subtitles ......................eem.... 26
E Using the On-Screen Display ................. 27
E Operating Other Equipment with the
Remote Control... 37, 38
Ш Table of Languages …………..…....….…rsesess 39
Changing the Camera Angle
Selecting a Playback Audio Setting
Displaying Subtitles
Selecting a Subtitle Language
Checking the Operational Status
Checking the Remaining Time and Setting Status
Programming the Remote Control
Operating Other Equipment
Notes on Region Numbers
E Before Calling Service Personnel ........... 41
Ш Specifications... 42
6 UN!
Introduction )
Identification of Controls
See the page in | _) for details.
Front Panel / Rear Panel / DVD Display
Ргоп! Рапе!
- — ——— POWER indicator 15» ——————— SKIP buttons
-— PHONES jack 111) r—— STOP button
PAUSE button
LEVEL knob [11 ) Г
DVD display pu Shuttle ring
|
Jog dial
Disc tray 15) — PLAY button 15)
POWER button 15) \— OPEN/CLOSE button (15)
Rear Panel
PCM/AC-3 DIGITAL OPTICAL AUDIO OUT jack [13)
ANALOG AUDIO OUT 2 (L/R) jacks 12» _ When connecting the optical digital
cable, remove the cap and fit the a
connector into the jack firmiy. <
VIDEO OUT jack 11) \ When not using the jack, keep it N
| capped to protect it from dust e
S VIDEO OUT jack [11D —_— intrusion. |
< —
IN — | 7
| | EN AUDIO OUT
С — >
Ш сое @ о e m i
Tg , | em
ColorStream™ (color difference) VIDEO OUT
jacks (Y/Cr/Cb) [12>
ANALOG AUDIO OUT 1 (L/R) jacks 11) —» — Power cord
PCM/AC-3 DIGITAL COAXIAL AUDIO OUT jack [13 Power plug [11
i H Pressing of the DIMMER button on the DIMMER Normal — Dimmed — Off
DVD Display remote control changes the brightness of € A |
the Display.
Repeat playback mode indicators
Operating status indicator Audio CD indicator MEMORY indicator
Title number indicator
Angle icon indicator
Chapter/track number indicator ColorStream™ (color difference) indicator
DVD indicator Total playing time/remaining time/elapsed time indicators
M The indicators vary depending on the kinds of discs you play.
DVD Video disc Audio CD
* When closing the disc tray: * When closing the disc tray:
Example Example
Total number of titles
Total number of Total playing time of
tracks the disc
* During playback: * During playback:
Example | Example
Playing chapter 3 Elapsed time of Playing track 6 Elapsed time of
in title 2 the current title the current track
Some DVD video discs may not display the chapter
numbers or elapsed time.
HB Other indicators
: When playing back the
same title, chapter or
When playing back the
entire disc repeatedly.
When playing back a
specific segment
repeatedly. (A-B repeat)
27
During memory
playback. [22)
When the camera angle
can be changed.
1 When “COLOR STREAM”
s set via the on-screen
| display. [31)
82
£
8m
mam О
Introduction )
Identification of Controls (continued)
The instructions in this manual describe the functions on the remote control. See the page in [> for details.
Remote Control
OPEN/CLOSE button 15)
Remote control selector 37)
SET UP, TV/VIDEO button 37) -
TVVIDEO
TE
TITLE button
Direction/CH (channel)/VOL (volume)
aa IRS tn
Hoge
SUBTITLE
pe
OPEN/CLOSE POWER
Bhi,
Ty,
a
art
A
4
a
POWER button 15)
in DISPLAY button 27)
SUBTITLE ON/OFF button
buttons 28) 28) (37)
MENU
MENU button*
“vo
+
RETURN button
ANGLE button
RETU RN
ENTER button
AUDIO button 25)
SUBTITLE button
REV (fast reverse) button 17)
SKIP buttons
PAUSE/STEP button 17>
FWD (fast forward) button [17 )
PLAY button 15»
DIMMER button
STOP button
LAST PLAY button
ZOOM button 23>
MEMORY button 22>
REPEAT button 21)
| Uan button 23)
| SLOW button
CLEAR button
Number buttons 19)
A-B RPT button 21)
T button
* MENU button
Use the MENU button to display
the menu screen included on
DVD video discs. To operate a
menu screen, follow the
instructions in “Locating a Title
Using the Title Menu”
Preparing the Remote Control
Insert the batteries into the remote control so you can use it to
operate the DVD video player.
Open the cover.
Make sure to match the + and — on the
batteries to the marks inside the battery
compartment.
Close the cover.
Improper use of batteries may cause battery leakage and corrosion.
To operate the remote control correctly, follow the instructions below.
* Do not insert the batteries into the remote control in the wrong
direction.
* Do not charge, heat, open, or short-circuit the batteries. Do not
throw the batteries into a fire.
* Do not leave dead or exhausted batteries in the remote control.
* Do not use different types of batteries together, or mix old and new
batteries.
* |f you do not use the remote control for a long period of time,
remove the batteries to avoid possible damage from battery
corrosion.
« If the remote control does not function correctly or if the operating
range becomes reduced, replace all batteries with new ones.
* |f battery leakage occurs, wipe the battery liquid from the battery
compartment, then insert new batteries.
» The batteries should last about one year with normal use.
Operating with the Remote Control
This section shows you how to use the remote control.
Set the remote control selector to
DVD.
Г To operate the TV
To operate the Cable
5 Ш To operate the DSS®
satellite receiver
Point the remote control at the
remote sensor and press the
buttons.
Res
cM ]
Within about 7 m
00
ooo
O [=] o
Distance: About 7 m from the front of the
remote sensor
Angle: About 30° in each direction of
the front of the remote sensor
* Do not expose the remote sensor of the
DVD video player to a strong light source
such as direct sunlight or illumination. If
you do so, you may not be able to
operate the DVD video player with the
remote control.
« Direct the remote control at the remote sensor of the DVD video
player.
* Do not drop or give the remote control a shock.
* Do not leave the remote control near an extremely hot or humid
place.
* Do not spill water or put anything wet on the remote control .
* Do not open the remote control.
10 um
Connections ) For details of output sound, see [25) .
Connecting to a TV
Connect the DVD video player to your TV.
Connecting to a TV
Ш Setting of the output sound type
From the on-screen displays, set the “AUDIO OUT SEL.” to “PCM”.
E Setting of the video output type
From the on-screen displays, set the “VIDEO OUT SEL.” to “S” when using the S VIDEO OUT jack. (81>
The Composite Video (yellow) output of the DVD video player is always operational regardless of output mode
selected (“COLOR STREAM” or “S”) via the on-screen display.
To wall outlet
_ ea
L
AUDIO OUT
© © Power plug
1 s ©
ос C3 DIGITAL
Ce? ! + q a |
To S VIDEO TU (yellow) A (white)
To “я To ANALOG AUDIO OUT 1
Ti) Signal flow
Audio/video cable (supplied)
To audio inputs
To video input (yellow) (red) y (white)
S video cable (supplied) To S video input | |
If the TV has an S video input, connect the
DVD video player with the supplied S video
cable. When using the S video cable there is TV or monitor with
no need to connect the yellow video cable. audio video inputs
» Refer to the owner's manual of the connected TV as well.
When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
* |f your television set has one audio input, connect the DVD video player to a Y cable adapter (not supplied) and then connect to your
TV.
* Connect the DVD video player to your TV directly. If you connect the DVD video player to a VCR, TV/VCR combination or video
selector, the playback picture will be distorted because DVD video discs are copy protected.
_ ВВ
Connecting headphones
Connect headphones to the PHONES jack on the front panel
using a stereo plug.
Before connecting, temporarily turn down the volume with
the LEVEL knob. Readjust to your preference when
playback begins.
LEVEL
O
Minimum Maximum
Connections ) For details of output sound, see [25) .
Connecting to an Audio System and TV with
ColorStream™ (color difference) Inputs
You can listen to the sound of audio CDs and DVD video discs in stereo and enjoy the enhanced picture quality of
DVD video discs on a TV with ColorStream™ (color difference) inputs.
Connecting to an Audio System and TV with ColorStream™ (color difference) Inputs
E Setting of the output sound type
From the on-screen displays, set the “AUDIO OUT SEL.” to “PCM”.
E Setting of the video output type
From the on-screen displays, set the “VIDEO OUT SEL. to “COLOR STREAM” when using the color difference VIDEO
OUT jacks (Y/Cr/Cb). 31)
To wall outlet
Power plug
Signal flow
|
To audio inputs (white) © O
O
of the amplifier rem O
lw | f=)
(red) —
c
Te
Audio system
To Cb video input
=>
To Cr video input
{ff}
To Y video input
>
TV or monitor with color
difference video inputs
ColorStream™ (color difference) outputs/inputs
Some TVs or monitors are equipped with color difference inputs. Connecting to these inputs allows you to enjoy higher
quality picture playback.
Actual labels for color difference inputs may vary depending on the TV manufacturer. (ex. Y, R-Y, B-Y or “Component
video”)
In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such
a case, adjust the TV or monitor for the optimum performance.
* Refer to the owners manual of the connected equipment as weli.
* When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall
outlet before making any connections.
* |f you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD video
player away from the tuner and radio.
* The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening
level. Otherwise, the speakers may be damaged by a sudden high volume sound.
* Turn off the amplifier before you connect or disconnect the DVD video player's power cord. If you leave the amplifier power on, the
speakers may be damaged.
72 uN
=
Connections ) For details of output sound, see [25).
Connecting to Optional Equipment
You can enjoy the high quality dynamic sound of Dolby Digital (AC-3), Dolby Pro Logic, and 2 Channel Digital
Stereo.
njoying Dolby Digital (AC-3) Sound
Dolby Digital (AC-3)
Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic
effect in the home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by connecting the
DVD video player to a 6 channel amplifier equipped with a Dolby Digital (AC-3) decoder or Dolby Digital (AC-3) processor. If you have a
Dolby Pro Logic Surround decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel
Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark.
ar
E Setting of the output sound type
e From the on-screen displays, set the
“AUDIO OUT SEL.” to “AC-3". a
» Select the sound recording system of © © © veo
the disc to “AC—3” on the audio nn
EL :
setting indication. [25>
To VIDEO OUT To PCM/AC-3 DIGITAL À
AUDIO OUT
(COAXIAL or OPTICAL)
Video cable 75 Q coaxial cable
Optical digital cable
Connection example To COAXIAL type To OPTICAL type | )
digital audio input J digital audio input
Connect either.
Z N
9 = O Amplifier equipped with a Dolby Digital
(ое С оо 5 5 (AC-3) decoder
EN
a ^\
3-dimensional sound —
playback [23) is not
available from this connection.
—
| video input
Front speaker
— (right)
a в Front speaker
Standard equipment to | (left)
enjoy Dolby Digital (AC-3) | |
* The DVD video pl Center —
player speaker <— \S
(equipped with an AC-3 — = Sub woofer
output jack) —=m="m ——=i=—
* DVD video discs recorded sic ой sr
in Dolby Digital (AC-3)
6 channel amplifier
equipped with a Dolby
Digital (AC-3) decoder, or
, Rear speaker ==7 ve Rear speaker
Dolby Digital (AC-3) (left surround) == A (right surround)
processor and power O J
amplifier > = = —— \
* 5 speakers and 1 sub Manufactured under license from Dolby Laboratories Licensing Corporation. “Dolby,” “AC-3,” “Pro
| woofer | Logic,” and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
—Ñ —
« DO NOT connect the PCM/AC-3 DIGITAL AUDIO OUT jack of the DVD video player to the AC-3 RF input of a Dolby Digital Receiver. This input
on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the PCM/AC-3 DIGITAL AUDIO OUT jack of the DVD video
player.
* Connect the PCM/AC-3 DIGITAL AUDIO OUT jack of the DVD video player to the “DIGITAL or “COAXIAL input of a Dolby Digital Receiver or
Processor.
+ Refer to the owner's manual of the connected equipment as well.
* When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet
before making any connections.
* The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening level.
Otherwise, the speakers may be damaged by a sudden high volume sound.
Turn off the amplifier before you connect or disconnect the DVD video player's power cord. If you leave the amplifier power on, the speakers
may be damaged. |
—
Warning
Do not set “AUDIO OUT SEL” to “AC-3” on the setting screen unless you are connecting (via the PCM/AC-3 DIGITAL AUDIO OUT
jack) an AV decoder that has the Dolby Digital (AC-3) decoding function. High volume sound may damage your hearing as well as the speakers.
Enjoying Dolby Pro Logic Surround Sound Enjoying 2 Channel Digital Stereo Sound
Dolby Pro Logic Surround 2 Channel Digital Stereo
ou can en the dynamic realistic sound of Dolby РГО и You can enjoy the dynamic sound of 2 Channel Digital Stereo
urround by connecting an amplifier and speaker system (rig у : г ЩЕ
and left front speakers, a center speaker, and one or two rear by connecting an amplifier equipped with a digital audio input
and speaker system (right and left front speakers).
speakers).
= With an amplifier equipped with Dolby Digital (AC-3)
Connect the equipment the same way as described in —
“Enjoying Dolby Digital (AC-3) Sound” (13) . Refer to that
amplifiers owners manual and set the amplifier so you can
enjoy Dolby Pro Logic Surround sound. ;
« With an amplifier not equipped with Dolby Digital (AC-3) 000 @ 2
Connect the equipment as follows. VIDEO OUT NI
To VIDEO OUT &
Video cable
© m
Cr Ch R L COMUAL OFTCAL
VIDEC OUT ANALOG POA à CT
75 Q coaxial
cable Optical digital cable
To ANALOG
J AUDIO OUT 2
To VIDEO OUT
Signal flow
Video cable Y
Audi |
udio cable (Connection To COAXIAL type To OPTICAL type a
example digital audio input digital audio input
(Connection \ Р Connect eith
example To audio input onnect erther.
Amplifier equipped
o Amplifier equipped with with a digital audio
$ Dolby Pro Logic Surround = =" input
: = _
: To video
— à. video input | input
— Front speaker | Front speaker
= E" Front speaker (left) 7 (right)
= (right)
=
Center speaker en
= Connect one or two rear « J
amo, Speakers.
Rear speaker ZA The output sound from the
rear speakers will be r
monaural even if you 3-dimensional sound playback [23) is not available from
_ connect two rear speakers. y this connection.
Ш Set “AUDIO OUT SEL. to “PCM” via the on-screen M Set “AUDIO OUT SEL” to “PCM” via the on-screen
displays. displays.
* Refer to the owner's manual of the connected equipment as well.
* When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making
any connections.
* The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening level. Otherwise, the
speakers may be damaged by a sudden high volume sound.
« Turn off the amplifier before you connect or disconnect the DVD video player's power cord. If you leave the amplifier power on, the speakers may be
damaged.
74 um
Basic Playback )
CAUTION
= и Keep your fingers well clear of the disc tray as it is
aying aC a ISC closing. It may cause serious personal injury.
POWER indicator DVD display STOP
Bornos
This section shows you the basics on how to play 1 3 2 4 Shuttle ring
back a DVD video disc or audio CD.
Basic Playback
MH Preparations
* When you want to play back DVD video discs, turn on the TV and select the video input source connected to the DVD video player.
When you want to enjoy the sound of DVD video discs or audio CDs from the audio system, turn on the audio system and select the
input source connected to the DVD video player.
* For connection details, see “Connections”. [11)— [14)
* Set the playback picture size according to the aspect ratio of the connected TV vía the on-screen displays. 33)
* |f you do not have the necessary equipment to enjoy Dolby Digital (AC-3) sound, set “AUDIO OUT SEL.” to “PCM” via the on-screen
. 128) 29
. Press POWER.
Set the remote control selector to “DVD”.
~~ The DVD video player turns on and the POWER indicator
~~ © onthe player illuminates.
Press OPEN/CLOSE. |
You can open the disc tray by pressing this
The disc tray opens. button even if the DVD video player is turned
off.
Place the disc on the disc
- tray.
* There are two different disc sizes. Place the
disc in the correct guide on the disc tray. If
the disc is out of the guide, it may damage
the disc and cause the DVD video player to
malfunction.
* Do not place anything except DVD video
discs or audio CDs on the disc tray.
With the playback side down
Press PLAY.
You may need to press the TITLE or MENU
The disc tray closes and playback starts. button on the remote control to display the
menu screen depending on the DVD video
If you insert a DVD video disc that contains a title menu, discs.
the menu screen appears.
See “To start playback from the menu screen” (16).
* Do not move the DVD video player during playback. Doing so may damage the disc.
* Use the OPEN/CLOSE button on the remote control or DVD video player to open and close the disc tray. Do not push the disc tray while it is
moving. Doing so may cause the DVD video player to malfunction.
* Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD video player to malfunction.
mu 75
Remote control ® ; E To obtain a higher quality picture
selector = с Occasionally, some picture noise not usually displayed with a
TITLE normal broadcast may appear on the TV screen while playing
MENU back a DVD video disc because the high resolution pictures on
A/V 4d» - these discs include a lot of information. While the amount of noise
depends on the TV you use with this DVD video player, you should
ENTER generally reduce the sharpness adjustment on your TV when
viewing DVD video discs.
VE PAUSE/STEP
SAD STOP m About 2 CD
The LP D) icons on the heading bar show the playable discs for
4 the function described under that heading.
DVD : You can use this function with DVD video discs
¿E : You can use this function with audio CDs
и и |
To start playback from the menu screen — To stop playback
1 Press 4/Y/</ > or the number buttons to STOP
select the title you want. ~~ Press STOP.
- / The DVD video player returns to chapter
TITLE 2 | - - | 1 ortrack 1.
TITLE 3 erm
2 Press ENTER.
ENTER
The DVD video player starts playback
from the selected title.
To pause playback (still mode)
В Remove the disc after the disc tray
PAUSE/STEP Press PAUSE/STEP during Er opens completely.
playback. e
* Be sure to press the OPEN/CLOSE
button to close the disc tray after you
remove the disc.
To resume normal playback, press the
PLAY button.
* The sound is muted during still mode.
To change the playback speed using the jog dial/shuttle ring
You can view pictures at a variety of speeds by turning the inner jog dial or the outer shuttle ring.
E Jog dial E Shuttle ring
Turn during still playback. Turn during normal playback or still
playback. |
Slow | Slow
Fast Fast
Forward: To advance the picture frame by ADN
Reverse fj A Forward
frame. | | | The playback speed can be controlled by the
Reverse: To reverse the picture frame by Ÿ tent of the wheel rotati
* The playback speed may differ depending on the discs.
* If you slow down the playback speed of DVD video disc by turning
the ring leftward, the DVD video player performs reverse frame
playback. The reverse frame playback may advance more rapidly
than in forward.
* The reverse frame playback may advance more rapidly than
in forward.
* The jog dial does not function during audio CD playback.
In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen menu may damage your
television set, permanently etching that image onto its screen. To avoid this, be sure to press the STOP button on your remote control once the
movie is completed.
16 mm
Basic Playback ) = TT
Playing Back a Disc Th
(continued) — e | REV
X 8 X30 Ew ©
15)
|
FWD
PLAY
PAUSE/STEP
ml
Frame Slow- Last
by Frame Motion Play
ml
|
|
You can play back discs at various speeds, and resume playback from the
location where you stopped playback. f
DVD
Playing Frame by Frame
You can advance a DVD video disc frame by frame.
Press PAUSE/STEP during still
playback.
Each time you press the PAUSE/STEP
button, the picture advances one frame.
Press REV or FWD during playback.
* DVD video disc
The playback speed becomes x2 the
normal speed.
Each time you press the REV or FWD
button, the playback speed changes.
REV: Fast reverse playback
FWD: Fast forward playback
TV screen
x 2 x 8 x 30
— —r
Ej ——
x2 the x8 the x30 the
normal speed normal speed normal speed
Audio CD
The fast reverse or fast forward playback
alternates between two speeds.
TV screen
FR1 FR2
Fast reverse playback
FF1 FF2
Fast forward playback
To resume normal playback … To resume normal playback
PLAY PLAY
1 Press PLAY. © . Press PLAY.
* The DVD video player does not play back sound and subtitles during The sound is muted during frame by frame playback.
scan reverse and forward of DVD video discs.
However, the DVD video player plays back sound during fast forward
or fast reverse playback of audio CDs.
The x2 , x8 and x30 speeds are only approximate speeds. These
speeds may vary slightly from disc to disc.
mm 17
pa SES te
ET Te
маны ps vn,
hy
PLAY
SLOW
DVD
Playing in Slow-Motion
You can play back a DVD video disc in slow-motion.
Press SLOW during playback.
The playback speed becomes half the
normal speed.
Each time you press the SLOW button, the
slow-motion speed changes.
TV screen
1/2 1/8 1/16
1/2 the 1/8 the 1/16 the
normal speed normal speed normal speed
To resume normal playback
PLAY
mm — P ress P L AY.
The sound is muted during slow-motion playback.
Resuming Playback from the Same Location
You can stop playback and resume playback later from the
same location on the disc.
Press STOP at the location where
you want to interrupt playback.
* The DVD video player memorizes the
location where you stopped playback.
* The DVD video player stores that
location in its memory even if you turn
off the player.
Press LAST PLAY.
The DVD video player resumes playback
from the location where you stopped
playback.
* The Last Play function is canceled when:
— you unplug the DVD video player from the wall outlet after you
stop playback.
— you eject the disc.
~ — you adjust/change parental lock 35) or select a disc menu
language setting
» There may be a difference of the location where playback resumes
depending on the discs.
Basic Playback )
DVD video disc >
Title 1 >| Title 2
Chapter 1 Chapter 2{ Chapter 1 Chapter 2 Chapter 3
| | | | |
р
Locating a Specific Title, Chapter, or Track
- Audio CD >
Track 1 Track 2 Track 3 Track 4 Track 5
| | | | |
NO ma] А) |)
Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. Audio
CDs are divided into tracks. You can quickly locate any specific title, chapter, or track.
DVD DVD
Locating a Title Using the Title Menu Locating a Title
If a DVD video disc contains a title menu, you can locate a
specific title using the title menu function.
Press TITLE.
The title menu appears on the TV screen.
Example of a title menu
© TITLE 20-2
TITLE 4
Press 4/ Y / </> to select the title
you want.
If the titles in the title menu are assigned a
number, you can directly locate a specific
title by pressing its assigned number with
the number buttons.
Press ENTER.
The DVD video player starts playback from
chapter 1 of the selected title.
* The instructions above describe the basic procedure. The
procedure varies depending on the contents of the DVD video disc.
If different instructions appear on the TV screen, follow those
instructions.
* |f you display the title menu during playback and press the TITLE
button again without selecting any title, the DVD video player
resumes playback from the point where you first pressed the TITLE
button.
mu 719
If a DVD video disc contains title numbers, you can locate a
specific title by directly selecting a title number.
Press T.
Make sure that the space next to TITLE is
highlighted.
Press the corresponding number
buttons for the title you want.
e.g. To select title 2
©
To select title 12
0-2)
TITLE:
CHAPTER: 1
TITLE: UB
CHAPTER: 1
Press PLAY.
The DVD video player starts playback from
chapter 1 of the selected title.
* You can shift the highlight between next to TITLE and CHAPTER by
pressing A/V.
* Pressing the CLEAR button resets the TITLE and CHAPTER
numbers. To clear the TITLE, CHAPTER display, press the T button
several times.
* You can select a preferred language for on-screen displays. 33)
| В
C7 Що TITLE
PRES A/V/</ >
2 o ENTER
ENS — - SKIP
J E PLAY
В = CLEAR
OF Number buttons
|
Fe T
If you know the chapter or track number you want to play, you
can locate it directly.
Press T.
Skip steps 7 and 2 if you are using an
audio CD.
e.g. DVD video disc
Press Y to highlight the space next
to CHAPTER.
e.g. DVD video disc
TITLE: 1
CHAPTER: HH
Press the corresponding number
buttons of the chapter or track you
want.
You can use the 6) button to select
numbers from 10 through 99.
e.g. To select chapter or track 25
0-6)
TITLE: 1.
. (10) - (19) (5) CHAPTER: BEE | TRACK: EB
DVD video disc Audio CD
Press PLAY.
The DVD video player starts playback from
the selected chapter or track.
e.g. To select chapter 25 in title 2
00-10-05
Title number Chapter number
TITLE: 2
CHAPTER: В
Pressing the CLEAR button resets the TITLE and CHAPTER
numbers. To clear the TITLE, CHAPTER display, press the T button
several times.
DVD CD
Locating a Specific Chapter or Track
You can locate consecutive chapters or tracks.
Press SKIP H<< or PP» repeatedly
to display the chapter or track
number you want.
AN | — The DVD video player starts playback from
— the selected chapter or track.
Ta TADO ah ды HOC: To locate preceding chapters or tracks
TEA When you press the SKIP ht button,
o the DVD video player starts playback
ОТО from the beginning of the current chapter
- E 8 Ë or track.
En When you press the SKIP kt button
Ea E twice, the DVD video player starts
TAE LE playback from the beginning of the
п preceding chapter or track.
PP : To locate succeeding chapters or tracks
Some titles may not display the chapter number.
DVD
tle
Locating a Specific Location Within a Ti
You can locate a specific location by entering the time (hours,
minutes, seconds).
Press T twice.
TIME Ci
Press the number buttons to enter
the time.
> 0-0-0-0-0
TIME
Press PLAY.
The DVD video player starts playback from
the specified location.
Some discs may not respond to this locating.
20 ==
Advanced Playback ) нс
PI ay in g R epea ted ly E.
gen
FP IN - _
... LES ... PLAY
Ta REPEAT
"8 A-B RPT
CLEAR
You can play back a specific title, chapter, track, or segment repeatedly. (Title € |
repeat, chapter/track repeat, A-B repeat) Oo:
Repeating a Title, Chapter, or Track Repeating a Specific Segment
You can play back the same title, chapter, or track repeatedly. You can play back a specific segment repeatedly.
(Title, chapter/track repeat) (A-B repeat)
Press A-B RPT at the beginning of
the segment (point A) you want to
play repeatedly.
Select the title, chapter, or track
you want to repeat.
Press REPEAT.
Each time you press the REPEAT button,
the repeat mode changes as follows.
+ DVD video disc
CHAPTER REPEAT Repeats the same
N chapter.
} Press А-В RPT again at the end of
TITLE REPEAT Repeats the same title. ;
the segment (point B).
+
REPEAT OFF Resumes normal
playback.
А-В
* Audio CD
TRACK REPEAT Repeats the same
track.
; . .
— Repeats the entire The DVD video player automatically
disc. returns to point A and starts repeat
; ' playback of the selected segment (A-B).
REPEAT OFF Resumes normal
playback.
|
* You can specify a segment only within the current title.
* You cannot set the A-B repeat function for segment that include
multiple camera angles.
There may be a slight difference between point A and the location
where playback actually resumes depending on the discs.
mu 27
Advanced Playback ) E
Playing in a Favorite Order
—— A/V /</b
—2
TITLE: 2
CHA
Д - SOMO
A
В
in
You can combine your favorite titles, chapters, or tracks and play them
back in any order. You can program up to 30 items into the memory.
(Memory playback)
Setting Titles, Chapters, or Tracks in a Favorite Order
The DVD video player automatically plays back titles, chapters, or tracks in the order you program.
Insert a disc and press MEMORY Eon =>
: R SELECT:
during stop. MN
The following menu appears. 1 T02625 6 T--€--
2 T02C12 7 T--€--
ОНО ня a 104602 — e TIle--
= 8 Hu O uE 10 T--6--
Se
8 T--C-- EXIT Eh ser в.
9 T--C--
т 10 7--C--
ES CEC To select another chapter in the same title,
EXT GERD EID seT you do not need to select the title number.
T: Title number C: Chapter number
Press PLAY while the MEMORY
menu appears on the TV screen.
Select the items you want in order
by pressing the number buttons,
then ENTER for each item.
Each time you press the «< / » button,
the -- indication next to T and C is
The DVD video player starts memory
playback.
highlighted in turn. Highlight where you “To change the programmed items
want to enter, then press the number = 1 While the MEMORY menu appears on the TV screen,
buttons. — press A/V to move the highlighted bar to the item
e.g. To play back chapter 25 in title 2, chapter ks you want to change.
12 in title 2, all the chapters in title 1, and +
chapter 2 in title 4. «, 2 Change the item following the instructions in step 2.
Title number Chapter number
| — ENTER E .
Memory 1 (7 +(2)+ >-0-6)- (e) > To cancel the programmed items
ENTER 1 While the MEMORY menu appears on the TV screen,
Memory 2 (1)-(2)- (e) i press A/V to move the highlighted bar to the item
ENTER ER you want to cancel.
Memory 3 (© (1) + O —. 2 Press the CLEAR button.
ENTER
Memory 4 «€ +(4)- >] ——(2)- (e) В
To select tracks from an audio CD in order, press ; playback
the number buttons for the track, then press the CLEA Press CLEAR
ENTER button for each item you want. (em The MEMORY indicator disappears.
* If you press the MEMORY button during memory playback, the programmed items will be displayed.
* You cannot select title, chapter, and track numbers not included on the disc.
e |f you press the MEMORY or RETURN button while the MEMORY menu appears on the TV screen, the MEMORY menu disappears.
* The programmed items will be cleared when:
— you turn off the DVD video player, or
— you remove the disc.
22 IN
Advanced Playback )
Zooming a Picture /
(SG |
momo)
—
You can zoom a picture. You can shift the zoom point as well.
Playing 3-Dimensional Sound
Zoom playback 3-dimensional sound playback
You can magnify areas within a picture. (Zoom playback) A
You can enjoy playback with real acoustics. (3-dimensional sound playback) AA
DVD
Zooming a Picture
Press ZOOM during normal
playback or slow motion.
The DVD video player magnifies in the
center of the picture.
ZOOM
If you press À / V / 4 / DB during zoom
playback, the zoom point shifts.
If the zoom point reaches the limit, the
color of “ZOOM” changes.
If you press CLEAR, the zoom point
returns to the center of the picture.
+ To resume normal playback
ZOOM
Press ZOOM during zoom playback.
* During still playback, the ZOOM button cannot turn the zoom on or
off.
* Zooming does not work on the sub-pictures such as subtitles or
menu screens included on DVD video discs.
EN 23
CA
A/VY/</>
ZOOM
3D.
CLEAR
Playing 3-Dimensional (3-D) Sound
You can realize expansive surround type effects even with two
speakers.
Press 3D during playback.
The on-screen display appears and shows
the current setting.
3D OFF
Press 3D.
Each time you press the button, 3D ON
and 3D OFF alternates.
Adjust the 3-D effect level by
pressing </ >.
Adjustment is possible when 3D ON is
displayed.
» : To increase the 3-D effect.
«|: То decrease the 3-D effect.
| : To turn off the 3-D effect
In step 2, press 3D to select 3D OFF.
3D OFF
The 3-D sound enhancement is available only via the ANALOG
AUDIO OUT jacks. If the PCM/AC-3 DIGITAL AUDIO OUT jack
(OPTICAL or COAXIAL) are connected, the 3-D sound is not
present.
* To enjoy 3-D sound enhancement, connect the ANALOG AUDIO
OUT jacks and set “PCM” via the on-screen displays.
The 3-D sound enhancement is available during stereo (2ch) and
Pro Logic play mode.
Advanced Playback )
Angle
ANGLE : 2
ANGLE : 1
= ,
À ee SE, CLC)
ANGLE :3—
Le
ий
You can select a preferred camera angle to watch a scene.
DVD
Changing the Camera Angle
Selecting the Camera
ее * "a.
Dn
If the scene was recorded from multiple angles, you can easily change the camera angle of the scene you are watching.
Press ANGLE while playing back a
scene recorded with multiple
angles.
Press the ANGLE button while the angle
icon in the DVD display is flashing. (££)
NE Current angie
number appears
Press ANGLE or 4 while the angle
number appears on the TV screen.
Each time you press the ANGLE or 4
button, the camera angle changes.
V : Cycles backwards
You can change the camera angle directly
by pressing the number buttons
corresponding to its angle number instead
of using the 4/ Y buttons.
To turn off the angle number indication
CLEAR
Press CLEAR.
x
a
6
Ke
>
©
a
Le,
©
о
<
e
>
Lo
€
You can change the camera angle during still playback. The camera angle changes to the new setting when you resume normal playback.
While playing back a title that contains at least one scene recorded from multiple angles, the angle icon indicator illuminates in the DVD display.
24 um
Advanced Playback ) E a
Selecting a Language
e + 0 0 9
“¡Buenos días!
You can select a preferred language and sound recording system from those included on the DVD video disc.
a To turn off the audio setting indication
Press AUDIO during playback.
CLEAR
AUDIO 1 ENG PCM 2CH— — Current audio am’) Press CLEAR.
Г setting
Audio appears for
channel about 3
© Recording seconds | |
system ) About recording systems
Language Шо o
Posi Ang 9 “ This DVD video player uses the Dolby Digital (AC-3) and
osition number .
PCM recording systems and cannot play back DVD video
: discs recorded in any other recording system.
The abbreviation of the language appears - 4 . y
instead of the language name. Refer to “ AC-3 5.1 Channel is displayed as “AC-3 6CH.
the list of languages and their “Note: Total channels available in AC-3 may vary from
abbreviations. : 1-86.
Press AUDIO or A while the audio
setting appears on the TV screen. Discs and output sounds
Each time you press the AUDIO or A
button, the audio settings included on the DVD video discs Audio CDs
DVD video disc change.
| Sound recording Linear PCM Linear PCM
6.9. system Dolby Digital 44.1kHz
48kHz 96kHZ ;
AUDIO 1 ENG PCM 2CH
— Audio setting on _
| the setting AC-3 AC-3
screen AC-3 | PCM | or AC-3 | PCM or
AUDIO 2 FRE AC-3 6CH PCM PCM
| ANALOG AUDIO : .
— OUT jacks a e О О О O
AUDIO 3 SPA PCM 2CH
| DIGITAL AUDIO | Dolby |PCcM |PCM |PCM | PCM
OUT jack Digital | (48 kHz) | (48 kHz) | (48 kHz)| — (44.1 kHz)
| bitstream
V : Cycles backwards +. 48 kHz processed
** ; 96 kHz processed
When you turn on the DVD video player or replace a disc, player returns to the initial default setting.
When you select a sound which is not included on the disc, the DVD video player plays a prior sound programmed on the disc.
mu 25
Advanced Playback )
language.
You can display subtitles from those included on the DVD
video disc.
Press SUBTITLE ON/OFF during
playback.
— Appears for
about 3 seconds
SUBTITLE 1 ENG ON
Good morning! Subtitles
= To turn off the subtitles
Press SUBTITLE ON/OFF.
The subtities disappear.
SUBTITLE 1 ENG OFF — Appears for
about 3 seconds
» Some DVD video discs are set to display subtitles automatically, and
you cannot turn them off even if you set the subtitle function to off.
* During some scenes, the subtitles may not appear immediately after
you press the SUBTITLE ON/OFF button.
Selecting Subtitles
You can display subtitles on the TV screen and select a preferred subtitle
SUBTITLE
ON/OFF
-—— A/Y
SUBTITLE
CLEAR
N BET N
Displaying Subtitles Selecting a Subtitle Language
You can select the subtitle language from those included on
the DVD video disc.
Press SUBTITLE during playback.
|Current subtitle
setting appears
for about 3
seconds
SUBTITLE 1 ENG ON————
Language
Position number
The abbreviation of the language appears
instead of the language name. Refer to
the list of languages and their
abbreviations.
Press SUBTITLE or A while the
subtitle setting appears on the TV
screen.
Each time you press the SUBTITLE or 4
button, the subtitle languages included on
the DVD video disc change.
e.g.
SUBTITLE 2 FRE ON
|
UBT{ TLE 3 SPA ON
V : Cycles backwards
. To turn off the subtitle setting indication
CLEAR
q Press CLEAR.
* When you turn on the DVD video player or replace a disc, player
returns to the initial default setting.
When you select a subtitle language which is not included on the
disc, the DVD video player plays a prior language programmed on
the disc.
* During some scenes, the subtitles may not appear immediately after
you change the subtitle language by pressing the 4 / Y buttons.
26 mm
Advanced Playback )
Display
TV screen.
DVD) „CD
Checking the Operational Status
You can view the current title number, track number, and total
playing time of the disc on the TV screen.
Press DISPLAY during stop.
DVD video disc
Current title number
First chapter number in
6.9. the current title
STOP +- Operational
TITLE: 2— status
CHAPTER: 1—
Audio CD
e.g First track number of the disc
STOP T Operational
a status
L 0:46:30
Tota! playing
time of the disc
When an audio CD is in the DVD video
player, the TOTAL indicator and total
playing time of the disc appear.
To turn off the on-screen display
DISPLAY
+ Press DISPLAY again.
mu 27
Using the On-Screen Ep
You can view information about a disc and its operational status on the
f > |
\ ® us ”
со со 3 DISPLAY
Am EG
DVD
Checking the Remaining Time and Setting Status
You can view the elapsed time, remaining time, and setting
status of the disc on the TV screen.
Press DISPLAY during playback.
DVD video disc
Current title number
Current chapter number
e.g. Operational status
Remaining time
TITLE: 3- Tin the current title
CHAPTER:
E
Remaining time
—in the current
chapter
| Elapsed time of
the current title
Playback mode
The REMAIN indicator and remaining time in
the current title appear in the DVD display.
Current track number
Audio CD
e.g. — Operational status
PLAY ini
TRACK: 3- — Remaining
0: O1: el current track
Remaining time
of the disc
Elapsed time of
the current track
Playback mode
The REMAIN indicator and remaining time in
the current track appear in the DVD display.
Press DISPLAY again during
playback.
When you play back an audio CD, the on-
screen display turns off.
_ Current audio
setting
1 ENG AC-3 2CH- | Current subtitle
12 ENG ON setting
| |_ Current angle
setting
The abbreviation of the language (e.g. ENG)
appears instead of the language name. Refer to
the list of languages and their abbreviations.
To turn off the on-screen display
DISPLAY
Press DISPLAY again.
Function Setup )
=" . 1
Customizing the Function
Settings 2
J Ц 1 НН
Gio sem Росток AC oser 7
You can change the default settings to customize performance to your
preference.
Displaying the SET UP MENU Screen
The SET UP MENU screen asks you to select a setting category from AUDIO SETTING, FUNCTION and DISPLAY. Each selected
category will provide you setting details via the succeeding screen.
Press SET UP during stop.
The SET UP MENU screen appears.
Ш ЗЕТ UP MENU ____ SELECT: fe
ENTER
Press A/V to select the category, then press ENTER. For the setting details,
see page in [_
ii SET UP MENU ___ SELECT: MI AUDIO SETTING — SELECT: fe
ENTER AUDIO OUT SEL.
D RANGE CONTROL ON
VOCAL KARAOKE OFF
ENTER
ENTER
LUS 1
MN SET UP MENU — — SELECT: фе |
* CEI
NE FUNCTION — — SELECT: e
ENTER TITLE STOP OFF
VIDEO OUT SEL. S
REMOTE CONFIRM. ON 31)
OSD ON
ENTER
ENTER
LUS tr
M SET UP MENU — — SELECT: ele
DISPLAY ___ SELECT:
e E
wor
ru
Q
N
en
QO
ye
Q
с
|
11.
SCHEE AYS E
ENTER TV SH :
ANGLE ICON ON
SUBTITLE —--
DISC MENU ENG 33)
ETURN
Cds ENTER
JE
The SET UP MENU screen disappears if you press the SET UP button while it is displayed.
28 mm
mu 29
Function Setup )
AUDIO SETTING
AUDIO OUT
TEXT G3 ED
Customizing the Function Settings (continued)
- | — Toselecta preferred language from those included on the disc. (25)
D RANGE CONTROL ORF 1 To switch AC-3 (ANALOG OFF) and PCM (ANALOG ON). 11 (12) (13) (25)
To turn on or off the function that makes faint sounds easier to hear even
if you lower the volume in late hours playback.
To turn on or off the vocal assist in DVD KARAOKE disc playback.
Setting the Audio Sound
After you select AUDIO SETTING on the SET UP MENU screen , adjust to your preference.
Press A/V to select the item, then press ENTER.
The setting screen of your selected item appears.
iil AUDIO SELECT: “de
Select a preferred language by
NAS
18H ITALIAN pressing 4/ Y /</ № ‚ апа
FRENCH JAPANESE then press ENTER.
SPANISH DUTCH
CHINESE KOREAN
ENTER
DESCRIPTIVE SERVICE
EXIT EI ue
* Some DVD video discs contain special output sound that describe the
actions on-screen for visually impaired persons. When you set
DESCRIPTIVE SERVICE to “ON” by pressing the AUDIO button, the
DVD video player automatically plays back this special feature.
Select the output sound type AC-3
or PCM by pressing 4 / № ‚ апа
then press ENTER.
ENTER
e Select the output sound type according to your
system connection. [11) (12) (13) (25)
N
HI AUDIO SETTING _ SELECT: fe
“AUDIO: EN
AUDIO QUT SEL. PCM
D RANGE CONTROL ON
VOCAL KARAOKE OFF
ENTER
* Some DVD video discs may not include your pre-
selected language. In this case, the DVD video
player automatically plays back the disc's initial
language offering. —
E AUDIO SETTING — SELECT: “e
ENG
OFF
ENTER
Select ON or OFF by pressing
< / > , and then press ENTER.
ENTER
=
ON: Dynamic range-is reduced.
DVD video discs.
Ч
о * This function works on playback of Dolby Digital (AC-3) recorded discs.
OFF: Full dynamic range is maintained. * The level of Dynamic Range Reduction may differ depending on the
WM AUDIO SETTING - SELECT: «fe
4
3
ENTER
AUDIO
RETURN
RETURN
: If you press the RETURN button while a menu appears on the screen, you will return
to the previous menu screen displayed.
N
Select ON or OFF by pressing
SU EE
EXT CARR als
ON: The vocal is output when it is recorded on the disc.
OFF: The vocal! is not output.
« / № , and then press ENTER.
HN AUDIO SETTING _ SELECT:
AUDIO ENG
AUDIO OUT SEL. PCM
D RANGE CONTROL ON.
VOCAL KARAOKE OFF.
EXIT ESPD ENTER)
The vocal assist feature is used during playback of AC-3 encoded DVD KARAOKE discs. This feature
allows you to turn off vocal audio tracks, or restore them for background accompaniment.
Press SET UP.
The setting screen disappears.
30 mm
Function Setup )
Customizing the Function Settings (continued)
FUNCTION
Ml FUNCTION — SELECT: de
To select the black level of playback pictures.
To turn on or off the function that automatically stops playback after playing one title.
TITLE STOP OFF
VIDEO OUT SEL. $ -
Repo TE CONFIRM. N 1 To switch S and COLOR STREAM. [11> [12>
To turn on or off the confirmation beeper for each remote command.
CHIE NED
To turn on or off the operational status display (On-screen display) on
the TV screen. |
Setting the Functions
After you select FUNCTION on the SET UP MENU screen (28), adjust to your preference.
Press 4/ Y to select the item, then press ENTER.
The setting screen of your selected item appears.
il BLACK LEVEL SELECT: eje FUNCTION — — SELECT: e
Select a preferred black level by
NTE. BL ‘Eve NME
pressing < / № ‚ апа then press TITLE STOP OFF
ENTER. VIDEO OUT SEL. 5
REMOTE CONFIRM. ON
ON
ENTER > 050
=
RAE
HRY ENTER
NORMAL: Standard black level.
ENHANCED: Expanded black level.
N
FUNCTION — — — SELECT: fe
BLACK LEVEL
W TITLE STOP act Select ON or OFF by pressing
</ D , and then press ENTER.
VIDEO QUT SEL. Ss
REMOTE CONFIRM. ON
ENTER op OSD ON
=
OFF: Player continues after playback of a title is completed.
ON: Player stops after playback of a title is completed.
N
№ FUNCTION — — SELECT: =f
Select S or COLOR STREAM by
i BLACK LEV NML.
pressing « / D, and then press BLACK STOP ME.
ENTER
=
S: Select when the S VIDEO OUT jack is connected. — * If you select “COLOR STREAM” when not using the
COLOR STREAM: Select when the ColorStream™ (color difference) color difference jacks (Y/Cr/Cb), the on-screen
VIDEO OUT jacks (Y/Cr/Cb) are connected display will be lost. In this event, additionally connect
J the VIDEO QUT jack (yellow). Select the appropriate
input on your TV and start this process again.
J
E 31
4
3
ENTER
RETURN
RETURN
to the previous menu screen displayed.
: If you press the RETURN button while a menu appears on the screen, you will return
DVD) CD
N
\.
UN REMOTE CONFIRM. SELECT: «fe |
Select ON or OFF by pressing
= </ >, and then press ENTER.
ENTER
=
ENTER
ON: Beeper sounds with each remote operation.
OFF: The beeper does not sound.
um os SELECT: ee
Select ON o OFF by pressin
GN e r YP Ing
«4 / D , and then press ENTER.
ENTER
=
SET UP ENTER
ON: Operational modes are displayed on-screen. (e.g. “PLAY”)
OFF: Operational modes are not displayed.
HM FUNCTION SELECT: fe
BLACK LEVEL NML.
TITLE STOP OFF
VIDEO OUT SEL S
osD ON
ENTER
Ш FUNCTION — — SELECT: e
BLACK LEVEL NML.
TITLE STOP OFF
VIDEO OUT SEL. S
T
ENTER
Press SET UP.
The setting screen disappears.
2
ws
ht
Q
ow
om
e)
=
=
м
3
cn
32 m=
Setting the Displays
Function Setup )
Customizing the Function Settings (continued)
DISPLAY
ANGLE ICON ON
SUBTITLE —
DISC MENU ENG
EX (T CHI Е disc.
disc.
To select the display language.
To select a picture size according to the aspect ratio of your TV.
Te To display the angle icon indicator on screen.
To select a preferred subtitle language from those included on the DVD video
To select a preferred disc menu language from those included on the DVD video
After you select DISPLAY on the SET UP MENU screen , adjust to your preference.
Press A/V to select the item, then press ENTER.
The setting screen of your selected item appears.
Il SCREEN DISPLAYS SELECT: le
FRENCH
SPANISH
Ех! т ЗА
ENTER JE
16:9 (WIDE):
Select a preferred language by
pressing A/ Y , and then press
ENTER.
ENTE
Select your TV type by
pressing </ P, and then
press ENTER.
ENTER
Select when a 16:9 wide TV is connected.
4:3 (NORMAL): Select when a 4:3 normal TV is connected.
ANGLE ICON ON
SUBTITLE ---
DISC MENU ENG
Wl DISPLAY — — —— SELECT: de
— SCREEN DISPLAYS
ENG
SUBTITLE
DISC MENU
* The displayable picture size is preset on the DVD video
disc. Therefore, the playback picture of some DVD video
discs may not conform to the picture size you select.
* When you play DVD video discs recorded in the 4:3
picture size only, the playback picture always appears in
the 4:3 picture size regardless of the TV shape setting.
MTV SHAPE SELECT: off
If you select 4:3 (NORMAL):
Select PS or LB by pressing
«4 / W», and then press
ENTER.
ENTER
=
PS (PAN-SCAN):
Displays pictures cropped to fill your TV
screen. Either or both sides of the picture are
cut off.
LB (LETTER BOX):
Displays theatrical images with masking bars
above and below the picture.
PS (PAN-SCAN)
LB (LETTERBOX)
J
a 33
“aa,
4
TITLE
— MENU
—3
ENTER
RETURN
SUBTITLE
ANGLE
RETURN
: If you press the RETURN button while a menu appears on the screen, you will return
to the previous menu screen displayed.
DVD) CD
: . :
H ANGLE (CON —— 4 Select ON or OFF by pressing MN DISPLAY — — SELECT: je
“ANGLE ECON Em </ D , and then press ENTER.
ANC
SUB
amp DISC MENU ENG
am
"Ca
ON: The angle icon automatically appears in white on the TV screen while a scene recorded from multiple angles is
played back. When you display the angle number on the screen by pressing the ANGLE button, the angle icon is
lit in red.
OFF: The angle icon is not displayed. DD
N
, :
E SUBTITLE SELECT: Select a preferred language by MH DISPLAY ..— SELECT : e
ENGL I SH ITALIAN SCREEN DISPLAYS ENG
FRENCH JAPANESE pressing 4/Y /</ » , and TV SHAPE 16:9
SPANISH DUTCH then press ENTER.
CHINESE KOREAN "
GERMAN р 4
MALAY
GEN
ENTER
+ Some DVD video discs may not include your pre-
selected language. In this case, the DVD video
player automatically displays subtitles consistent
with the disc’s initial language setting. VD
Some DVD video discs contain special subtitles, an enhancement of closed
captioning for hearing impaired persons. When you set EXTENDED FEATURES
to “ON” by pressing the SUBTITLE button, the DVD video player automatically
\_ displays these special subtitles.
tt DISC MENU * | Selecta preferred language by № DISPLAY ___ SELECT: +
we ALLAN pressing 4/Y /</ № ‚ апа SCREEN DISPLAYS ENG
FRENCH JAPANESE then press ENTER. TY RAPE ON 16:9
SPANISH — DUTCH
N SUBTITLE
CHINESE KOREAN ENTER — “DISC MENU
=»
- GENTE)
EM SET UP
To change the language while a disc is inserted:
1) Press the TITLE or MENU button to display the disc menu.
2) Press the SET UP button.
If the disc menu has only one language, the display does not
appear.
PP | DISC MENU:ENG
3) Press the SET UP button repeatedly to select the language.
Refer to “Table of languages”.
4} Press the ENTER button.
The disc menu is displayed in the selected language.
\.
Press SET UP.
The setting screen disappears.
34 mm
Function Setup )
equipped with the parental lock feature.
Setting the Parental Lock
Setting the Parental Lock
You can use the parental lock function only with DVD video discs
1,7
4, 5, 6
3, 4, 5, 6
STOP
RETURN
CLEAR
2,3
EN 35
DVD video discs equipped with the parental lock function are rated according to their content. The contents allowed by a parental
lock level and the way a DVD video disc can be controlled may vary from disc to disc. For example, if the disc allowed you could edit
out violent scenes unsuitable for children and replace them with more suitable scenes, or lock out playback of the disc altogether.
Press SET UP during stop.
The SET UP MENU appears on the TV
screen.
Press 9 twice.
The following menu appears.
ii PARENTAL LOCK
Press </P to select the country
whose standards were used to rate
the DVD video disc, then press
ENTER.
The following menu appears.
Ii PARENTAL LOCK _ SELECT: ale
USAB
Press the number buttons to create
a personal 4-digit security code,
then press ENTER.
e.g.
+
HI PARENTAL LOCK _ SELECT: =f
If you make a mistake before pressing the
ENTER button, press the CLEAR button and
enter your 4-digit security code again.
Press </P to select “ON,” then
press ENTER.
The following menu appears.
il PARENTAL LOCK __ SELECT: фе
GE
SETUP ENTER
Press A/ Y to select the parental
lock level, then press ENTER.
You cannot play back DVD video discs rated
higher than the level you selected uniess you
cancel the parental lock function.
For example, when you select level 7, the
discs rated higher than level 7 are locked out
and cannot be played back.
e.g. When you select USA
ill PARENTAL LOCK
SELECT :
- When you
select “CAN,”
“САМ”
appears
instead.
LOCKED LEVELS
The parental lock level is equivalent to the
following USA movie ratings.
LEVEL7: NC-17 LEVEL3: PG
LEVELO6: R LEVEL 1: ©
LEVEL 4: PG 13
The parental lock levels for “CAN” (Canada)
are included for future use. Check the
appropriate parental lock level when you buy
a DVD video disc equipped with the parental
lock feature in the future.
Press SET UP.
The SET UP MENU disappears.
RETURN
to the previous menu screen displayed.
— To change the parental lock level
You can change the parental lock level by following the
steps in “Setting the Parental Lock.”
In step 3, press the number buttons to enter your 4-digit
security code, then continue to step 4.
If you make a mistake, press the CLEAR button and enter
the correct 4-digit security code.
_ To change your 4-digit security code
You can change your 4-digit security code.
Follow steps I and 2 in “Setting the Parental Lock.”
Press the STOP button four times while the security
code menu appears on the TV screen.
STOP STOP STOP STOP
@-0-0-0
The 4-digit security code is cleared.
Press the number buttons to create a new 4-digit
security code, then press the ENTER button.
Complete steps 4 to 7 in “Setting the Parental Lock.”
DVD video discs may or may not respond to the parental lock
settings. Make sure this function works with your DVD video discs.
: If you press the RETURN button while a menu appears on the screen, you will return
To cancel the parental lock function
Follow steps 7 and 2 in “Setting the Parental Lock.”
Press the number buttons to enter your 4-digit
security code, then press the ENTER button.
If you make a mistake, press the CLEAR button and
enter the correct 4-digit security code.
Press <«/ to select “OFF” then press the ENTER
button.
SELECT : “ao
HN PARENTAL LOCK
GA
‘ЗН ENTER EEE
The SET UP MENU appears again.
Press the SET UP button.
The SET UP MENU disappears, and the parental lock
function is cancelled.
og
=
©
7)
=
o
per
©
=
3
ra
36 EN
домене de aa,
Ha
Function Setup ) TT т
я я | Cl — si 2
Operating Other Equipment ©.
With the Remote Control 25)
You can operate the basic functions of selected TVs, Cable Boxes 2
and DSS® satellite receivers using the supplied remote control.
Programming the Remote Control Operating Other Equipment
You can operate other equipment with the DVD remote
control.
Set the remote control selector to
Operate other equipment using the buttons as
the position corresponding to the follows.
equipment you want to operate. C5 ble Box
DSS: DSS? satellite
/ To operate a TV receiver
- DVD | Button Function Equipment*
— CABLE — To operate a Cable Box POWER Turn the power on and off. TV, CB, DSS
\ TITLE On-screen program guide DSS
To operate a DSS® MENU On-screen display of functions DSS
satellite receiver 1. Guide
2. Dish Pointing and Set-up Function
While holding down SET UP, press A/V/4/» Cursor DSS
the number buttons that CH4/Y Select a channel TV, CB
а
correspond to your equipment s VOL +/- Adjust the volume TV
brand code (listed on the next à
RETURN Refer to the equipment's instruction. TV
page). Exit DSS
e.g. To program brand code 060 DISPLAY Turn the on-screen display on and off. TV
SETUP ENTER Refer to the equipment's instruction. TV, CB
©-©-©
| | SKIP TQ Channel down DSS
Hold down.
SKIP pp Channel up DSS
Rel SET UP Number buttons Enter the channel number TV, CB
élcase UP. TVNIDEO Select a video input TV
The DVD remote control memorizes the Turn the video output on or off CB
selected brand code.
Point the remote control at the
equipment you want to operate.
Always remember to set the remote control
selector to the position that corresponds to
the equipment you want to operate.
* The remote control is programmed at the factory to operate Toshiba TVs (156), Cable Box (000) and DSS? satellite receiver (790).
* The same brand may use different codes depending on the model. Enter the correct number referring to the brand code table.
e For some brands, several brand codes are provided. Try each of them until the remote control operates your equipment.
+ Some equipment may not respond to all of the functions in the table above, or may not be operated at all with this remote control. In this case,
operate that equipment with its own remote control.
* |f you replace the remote control's batteries, remember to reprogram the brand codes.
mu 37
Brand Code Table
TV code table
Brand name Brand code Brand name Brand code
Toshiba 060, 149, 154, Philco 019, 020, 030,
156 054, 096
Bell á Howeil 016, 154 Philips 054
Carver 054 Proton 003, 178
Citizen 030, 039, 046, Pulser 019
056, 060, 022, Quasar 051, 055, 250
186, 280 Radio Shack 019, 039, 165,
Curtis Mathes 030, 039, 060, 180
154, 415 RCA 018, 019, 047,
Emerson 019, 039, 154, 090, 135
177,178, 179, Realistic 019, 030, 039,
180, 185, 236, 056, 154, 165,
280, 282, 463 178, 180
Fisher 154, 159 Runco 017, 030
GE 021, 027, 047, Samsung 019, 030, 039,
051, 055, 135, 056, 060, 178
178, 282, 451 Sanyo 154, 159
GoldStar 019, 030, 039, Sears 047, 054, 056,
056, 178 149, 154, 156,
Hallmark 178 159, 171, 178,
Hitachi 056, 145, 151 179
Infinity 054 Sharp 039, 093, 165
JBL 054 Sony 000, 080
JVC 053 Soundesign 178, 179, 180,
LXI 047, 054, 154, 186
156, 178 Sylvania 020, 030, 054,
Magnavox 020, 030, 054, 096
096, 186, 187 Tandy 093
Marantz 030, 054 Technics 051, 250
Memorex 016, 056, 150, Teknika 016, 019, 039,
154, 178 054, 056, 060,
MGA 019, 030, 150, 092, 150, 179,
178 180, 186
Mitsubishi 019, 150, 178 TMK 056, 177,178
MTC 019, 030, 056, Vidtech 019, 178
060, 185 Wards 016, 019, 020,
NAD 156, 166, 178 021, 027, 030,
Optonica 093, 165 054, 056, 080,
Panasonic 051, 055, 250 096, 165, 178,
Penney 003, 018, 019, 179
021, 027, 030, Zenith 016, 017
039, 047, 051,
060, 135, 149,
156, 178
| Cable Box code table
Brand name Brand code
Toshiba 000
ABC 003, 007, 008,
011,013,014, 017
Archer 022, 153, 207
Century 153
Citizen 153, 315
Colour Voice 025, 031
Comtronics 040
Eastern 002
Garrard 153
Gemini 015
General 011, 276, 476
Instrument
Hamlin 009, 020, 034,
259
Hitachi 011
Jasco 153, 315
Jerrold 003, 011, 012,
014, 015, 276,
476
Memorex 000
Movie Time 063, 156
NSC 063, 156
Oak 007, 019
Panasonic 000, 021, 107
Paragon 000
Philips 025, 031, 153
Pioneer 144, 533
Pulsar 000
RCA 021
Regal 020, 259
Regency 002
Rembrandt 011
Runco 000
Samsung 040, 144
Scientific Atlanta 006, 008, 017,
277, 477
Signal 015, 040
Signature 011
SL Marx 040
Sprucer 021
Starcom 003, 015
Stargate 015, 040
Tocom 012, 013
Unika 022, 153, 207
United Artists 007
United Cable 003
Universa! 022, 056, 153,
191, 207
Viewstar 063, 258
Zenith 000, 525
DSS® satellite receiver code
table
Brand name Brand code
Toshiba 790
Hitachi 819
HTS 775
Hughes Network 749
Systems
Magnavox 722, 724
Memorex 724
Philips 722,724
RCA 566
Sony 639
DSS? is registered trademark of
DIRECTV. Inc., an unit of GM Hughes
Electronics.
The code numbers listed above were the most recent ones available at the time of manufacture.
E
= с. a
ar
38m
Function Setup )
Table of Languages
Table of Languages and Their Abbreviations
Abbreviation | Language Abbreviation | Language Abbreviation | Language Abbreviation | Language
of the of the of the of the
Language Language Language Language
——- No alternate EO Esperanto LN Lingala SL Slovenian
language ET Estonian LO Laotian SM Samoan
CHI Chinese EU Basque LT Lithuanian SN Shona
DUT Dutch FA Persian LV Latvian, Lettish so Somali
ENG English FI Finnish MG Malagasy SQ Albanian
FRE French FJ Fiji MI Maori SR Serbian
GER German FO Faroese MK Macedonian SS Siswati
ITA italian FY Frisian ML Malayalam ST Sesotho
JPN Japanese GA Irish MN Mongolian su Sundanese
KOR Korean GD Scottish Gaelic MO Moldavian SV Swedish
MAY Malay GL Galician MR Marathi SW Swahili
SPA Spanish GN Guarani MT Maltese TA Tamil
AA Afar GU Gujarati MY Burmese TE Telugu
AB Abkhazian HA Hausa NA Nauru TG Tajik
AF Afrikaans HI Hindi NE Nepali TH Thai
AM Amharic HR Croatian NO Norwegian TI Tigrinya
AR Arabic HU Hungarian OC Occitan TK Turkmen
AS Assamese HY Armenian OM (Afan) Oromo TL Tagalog
AY Aymara IA Interlingua OR Oriya TN Setswana
AZ Azerbaijani IE Interlingue PA Panjabi TO Tongan
BA Bashkir IK Inupiak PL Polish TR Turkish
BE Belorussian IN Indonesian PS Pashto, Pushto TS Tsonga
BG Bulgarian IS Icelandic PT Portuguese TT Tatar
BH Bihari IW Hebrew QU Quechua TW Twi
BI Bislama JI Yiddish RM Rhaeto-Romance UK Ukrainian
BN Bengali, Bangla JW Javanese RN Kirundi UR Urdu
BO Tibetan KA Georgian RO Rumanian UZ Uzbek
BR Breton KK Kazakh RU Russian VI Vietnamese
CA Catalan KL Greenlandic RW Kinyarwanda VO Volapük
CO Corsican KM Cambodian SA Sanskrit WO Wolof
CS Czech KN Kannada SD Sindhi XH Xhosa
CY Welsh KS Kashmiri sa Sango YO Yoruba
DA Danish KU Kurdish SH Serbo-Croatian ZU Zulu
DZ Bhutani KY Kirghiz Si Singhalese
EL Greek LA Latin SK Slovak
Others )
Notes on Discs
On Handling Discs
* Do not touch the playback side of the disc.
Playback side
» Do not attach paper or tape to discs.
x
On Cleaning Discs
e Fingerprints and dust on the disc cause picture and sound
deterioration. Wipe the disc from the center outwards with a
soft cloth. Always keep the disc clean.
* If you cannot wipe off the dust with a soft cloth, wipe the disc
lightly with a slightly moistened soft cloth and finish with a
dry cloth.
* Do not use any type of solvent such as thinner, benzine,
commercially available cleaners or antistatic spray for vinyl
LPs. It may damage the disc. |
On Storing Discs
* Do not store discs in a place subject to direct sunlight or
near heat sources.
* Do not store discs in places subject to moisture and dust
such as a bathroom or near a humidifier.
* Store discs vertically in a case. Stacking or placing objects
on discs outside of their case may cause warping.
About This Owner's Manual
This owner's manual explains the basic instructions of this
DVD video player. Some DVD video discs are produced in a
manner that allows specific or limited operation during
playback. As such, the DVD video player may not respond to
all operating commands. Refer to instruction notes of discs.
“Y” may appear on the TV screen during operation.
White “ W ” means that the operation is not permitted by the
DVD video player; red “ W” by the operation is not permitted
by DVD video disc.
This section shows you how to handle, clean, and store discs.
Playable Discs
This DVD video player can play back the following discs.
Disc mark | Contents | Disc Maximum
size playback time
Approx. 4 hours
(single sided disc)
Audio | 12 cm Approx. 8 hours
DVD + (double sided disc)
video DVD Video
discs > | (moving Approx. 80 minutes
pictures) 8 om (single sided disc)
Approx. 160 minutes
(double sided disc)
12 cm 74 minutes
. COMPACT
audio Audio | 8CM 20 minutes
$ DIGITAL AUDIO (CD
single)
You cannot play back discs other than those listed above.
This DVD video player uses the NTSC color system, and
cannot play back DVD video discs recorded in any other color
system (PAL, SECAM, etc.).
Notes on Region Numbers
The region number of this DVD video player is 1. If region
numbers, which stand for their playable area, are printed on
your DVD video disc and you do not find [&) or , disc
playback will not be allowed by the player. (In this case, the
DVD video player displays the message.)
Notes on Copyright
It is forbidden by law to copy, broadcast, show, broadcast on
cable, play in public, and rent copyrighted material without
permission.
DVD video discs are copy protected, and any recordings
made from these discs will be distorted.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and
other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
Spatializer® 3-Dimensional Sound Processing provided by
Desper Products. Inc.
Certain audio features of this product manufactured under a
license from Desper Products, Inc., Spatializer® and the
circle-in-square device are trademarks owned by Desper
Products, Inc.
40
Others )
Check the following guide for the possible cause of a problem before contacting service.
*4
Before Calling Service Personne
Symptoms and Correction
Symptom Cause Correction Page
No power. The power plug is disconnected. Connect the power plug into the wall outlet | 11,12
securely.
No picture. * The TV is not set to receive DVD signal * Select the appropriate video input mode 15
output. on the TV so the picture from the DVD
video player appears on the TV screen.
* The video cable is not connected * Connect the video cable into the jacks 11,12,
securely. securely. 13, 14
No sound. * The equipment connected with the audio | * Select the correct input mode of the 15
cable is not set to receive DVD signal audio receiver so you can listen to the
output. sound from the DVD video player.
* The audio cables are not connected * Connect the audio cable into the jacks 11,12,
securely. securely. 13, 14
* The power of the equipment connected * Turn on the equipment connected with —
with the audio cable is turned off. the audio cable.
* The setting of output sound type is not * Set the audio setting correctly. 28, 29
correct. |
The playback picture has * The disc is dirty. * Eject the disc and clean it. 40
occasional distortion. * It is in fast forward or fast reverse Sometimes a small amount of picture distortion —
playback. may appear. This is not malfunction.
Brightness is unstable or * The copy protection's effect. * Connect the DVD video player to the TV 11
noises are produced on directly.
playback pictures.
The DVD video player does | * No disc is inserted. * Insert a disc. (Check that the DVD or 8
not start playback. audio CD indicator in the DVD display is
lit.)
e An unplayable disc is inserted. * Insert a playable disc. (Check the disc 40
type and color system.)
« The disc is placed upside down. * Place the disc with the playback side 15
| down.
* The disc is not placed within the guide. * Place the disc on the disc tray correctly 15
inside the guide.
* The disc is dirty. * Clean the disc. 40
* A menu is on the TV screen. * Press the SET UP button to turn off the —
menu screen.
* The parental lock function is set. * Cancel the parental lock function or 35, 36
change the parental lock level.
Buttons do not work. Power supply fluctuations or other Turn the power on or of with the POWER —
abnormalities such as static electricity may | button. Or disconnect the power plug and
interrupt correct operations. insert it into the wall outlet again. |
The remote control does not | * The remote control is not pointed at the | * Point the remote control at the remote 10
work properly. remote sensor of the DVD video player. sensor of the DVD video player.
* The remote contro! is too far from the * Operate the remote control within about 7 10
DVD video player. m.
e The batteries in the remote control are * Replace the batteries with new ones. “10
exhausted.
The remote control selector is settothe | * Set the remote control selector to the 10, 37
wrong position. corresponding position for the equipment
you want to operate.
me 47
Others )
Specifications
DVD Video Player / Outputs / Supplied Accessories
[DVD Video Player]
“1 120 V AC, 60 Hz
| Semiconductor laser, wavelength 650 nm
DVD linear sound : 48 kHz sampling 4 Hz to 22 kHz
96 kHz sampling 4 Hz to 44 kHz
Audio CD : 4 Hz to 20 kHz
More than 108 dB
More than 96 dB
Less than 0.004 %
Below measurable level (less than +0.001 % (W.PEAK))
Temperature: 5 °C to 35 °C, Operation staius: Horizontal
[Outputs]
T 4.0 (р-р), 75 ©, negative sync., pin jack x 1
(Y) 1.0 V (p-P). 75 Q, negative sync. Mini DIN 4-pin x 1
(C) 0.286 V (p-p), 75 Q
(Y)-1.0 V (p-P), 75 Q, negative sync., pin jack x 1
(Cr)/(Cb) 0.7 \ (р-р), 75 ©
Optical connector x 1
0.5 V (p-p), 75 Q, pin jack x 1
2.0 V (rms), 330 4, pin jack (L, R) x 2
32 Q (30mW), Impedance: more than 8 Q
[Supplied Accessories]
або са restera eee EE
Audio/video cable een TT
Remote control (SE-R3107) ......e-r0e00rre0erer nt
Batteries (AAA) o.oo issn eee
e Designs and specifications are subject to change without notice.
LIMITED WARRANTY DVD VIDEO PLAYER »
Toshiba America Consumer Products, Inc. (“TACP”), Toshiba Hawaii (“THI”) and Toshiba Canada Limited (“TCL’) make the following limited warranties. These limited
warranties extend to original purchaser or any person receiving this set as a gift from the original purchaser and to no other purchaser or transferee.
Limited Ninety (90) Day Warranty Commercial Units
TACP/THI warrant this product against defects in materials or workmanship for a Products sold and used for commercial use have a limited ninety (90) day
period of ninety (90) days after the date of original retail purchase. During this warranty for all parts and labor.
period, TACP/THI will repair a defective product or part without charge to you.
You must deliver the entire product to a TACP/THI Authorized Service Station. Owner's Manual
You should read the owner's manual thoroughly before operating this product.
You should complete and mail the enclosed Demographic card within ten (10)
days after you, or the person who has given you this product as a gift,
Toshiba America Consumer Products Inc. purchased this product. This is one way to enable TACP to provide you with
Returns Center better customer service and improved products. Failure to return the card will
1420C Toshiba Dr. not affect your rights under this warranty.
Lebanon, TN 37087
You are responsible for all transportation and insurance charges for the unit to
and from the Authorized Service Station. If you live in the U.S.A. you may, at
your option, return your DVD Unit to:
o Your Responsibility
nr t han VD hane ni
Upon receipt we will, at our option, exchange the DVD Unit with a new or The above warranties are subject to the following conditions:
refurbished unit. Canadian consumers are requested to contact TCL. In (1) You must retain your bill of sale or provide other proof of purchase
Hawaii consumers are requested to contact THI. (2) You must notify a TACP/THI/TCL /Authorized Service Station within thirty
Limited One (1) Year Warranty (30) days after you discover a defective product or part.
TACP/THI further warrant the parts in this product against defects in materials (3) All warranty servicing of this product must be made by a TACP/THI/TCL
or workmanship for a period of one (1) year after the date of original retail Authorized Service Station.
purchase. During this period, TACP/THI will replace a defective part without (4) U.S.A. warranties are effective only if the product is purchased and
charge to you, except that if a defective part is replaced after ninety (90) days operated in the U.S.A. or Puerto Rico.
from the date of the original retail purchase you pay labor charges involved in (5) Labor service charges for set installation. Set up, adjustment of customer *
the replacement. You must also deliver the entire product to a TACP/THI controls and installation or repair of antenna systems are not covered by
Authorized Service Station. You are responsible for all transportation and this warranty. Reception probiems caused by inadequate antenna systems
insurance charges for the unit to and from the Authorized Service Station. If you are your responsibility.
live in the U.S.A. you may, at your option, return your DVD Unit to: (6) Warranties extend only to defects in materials or workmanship as limited
Toshiba America Consumer Products Inc. above and do not extend to any product or parts which have been lost or
Returns Center discarded by you or to damage to products or parts caused by misuse,
1420C Toshiba Dr. accident, damage caused by Acts of God, such as lighting or fluctuations in
Lebanon, TN 37087 electric power, improper installation, improper maintenance or use in
Upon receipt we will, at our option, exchange the DVD Unit with a new or violation of instructions furnished by us; or to units which have been altered
refurbished unit. Canadian Consumers are requested to contact TCL. In or modified without authorization of TACP/THI/TCL or to damage to
Hawaii consumers are requested to contact THI. products or part thereof which have had the serial number removed,
altered, defaced or rendered illegible.
Rental Units (7) Should you elect to return your DVD Unit to TACP after the ninety (90) days
The warranty for rental units begin with the first rental or thirty (30) days from and within one (1) year, or after the warranty period has expired: Call (800)-
the date of shipment to the rental firm, whichever comes first. 631-3811 to receive information concerning an exchange price. Payment
must be enclosed with product in the form of a certified check or money
order including reason for return.
(8) Physically damaged DVD Units are not acceptable for repair or exchange
whether in or out of warranty and will be returned as received.
How to Obtain Warranty Service
(1) Refer to the troubleshooting guide in your owner's manual. This check list may solve your problem.
(2) In the U.S.A., only call the TACP toll free number 800-631-3811, or if in Hawaii or Canada see listing below within (30) days after you find a defective product or
part.
(3) Arrange for the delivery of the product to the TACP/THI/TCL Authorized Service Station or TACP Return Center. Products shipped to the Service Station must be
insured and safely and securely packed, preferably in the original shipping carton, and a letter explaining the defect and also a copy of the bill of sale or other
proof of purchase must be enclosed.
In the Continental United States contact: In Hawaii contact: In Canada contact:
Toshiba Hawaii Inc. Consumer Electronics Group Consumer Electronics Group
327 Kamakee Street 191 McNabb Street 22171 Fraserwood Way
: Honolulu, HA 96814 Markham, Ontario L3R 8H2 Richmond, B.C. V6W 1J5
Toll Free (808)-521-5377 (905)-470-5400 (604)-303-2500
800-631-3811
Consumer Electronics Group
1643 North Service Road
Droval, QC H9P 11
(514)-856-4100
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose, are expressly limited to the duration of the
limited warranties set forth above. With the exception of any warranties implied by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other
warranties, guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or replacement of any parts. in no event shall TACP/THI be
liable for consequential or incidental damages. ;
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any manner whatsoever. The time within
which an action must be commenced to enforce any obligation of TACP/THI arising under the warranty or under any statute, or law of the Unite States or any state
thereof, is hereby limited to ninety (90) days from the date you discover or should have discovered, the defect. This limitation does not apply to implied warranties arising
under state law.
This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. Some states do not allow limitation on how long an
implied warranty lasts, when an action may be brought, or the exclusion or limitation of incidental or consequential damages, so the above provisions may not apply to
you.
ATTENTION CANADIAN CONSUMERS:
Canadian consumers are requested to complete the special Canadian “Warranty Registration Form” enclosed, and forward this completed form with a copy of bill of
sale to TOSHIBA OF CANADA to “Register and Validate” their warranty. Product must be purchased from an Authorized Canadian Dealer. Products purchased in the
U.S.A. and used in Canada are not covered by these warranties.
IMPORTANT: PACKING AND SHIPPING INSTRUCTION
When you send the product to a Service Station, you must use the original carton box and packing material, then insert the original carton box containing the unit into
another carton using more packing material.
Printed in Japan
E 43
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement