Panasonic TC-22LH1 22 in. HDTV

Panasonic TC-22LH1 22 in. HDTV

LCD TV

Operating Instructions

Model No.

TC-22LH1

For assistance, please call : 1-800-211-PANA (7262)

or send e-mail to : [email protected]

or visit us at www.panasonic.com (U.S.A)

For assistance, please call : 787-750-4300

or visit us at www.panasonic.com (Puerto Rico)

For assistance, please call : 1-800-561-5505

or visit us at www.panasonic.ca (Canada)

Before connecting, operating or adjusting this product, please read these instructions completely.

Please keep this manual for future reference.

English

TQBC0633-1

Important Safety Instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrow head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.

The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance.

Note to CATV System Installer:

This reminder is provided to direct the CATV system installer’s attention to Article 820–40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Important Safety Instructions for LCD TV

1) Read these instructions.

All the safety and operating instructions should be read before the appliance is operated.

2) Keep these instructions.

The safety and operating instructions should be retained for future reference.

3) Heed all warnings.

All warnings on the appliance and in the operating instructions should be adhered to.

4) Follow all instructions.

All operating and use instructions should be followed.

5) Do not use this apparatus near water.

For example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

6) Clean only with dry cloth.

Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Slots and Openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

9) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

10) Only use attachments / accessories specified by the Manufacturer.

11) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.

Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

12) Unplug this apparatus during lightning storms or when unused for long periods of time.

This will prevent damage to the product due to lightning and power-line surges.

13) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

14) To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected.

2

Important Safety Instructions

15) If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection

EXAMPLE OF ANTENNA

GROUNDING AS PER (NEC)

NATIONAL ELECTRICAL

CODE

against voltage surges and built up static charges. In the U.S. Selection 810-21 of the

National Electrical Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and

ELECTRIC

SERVICE

EQUIPMENT

GROUND

CLAMP

ANTENNA

LEAD-IN WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS requirements for the grounding electrode.

16) An outside antenna system should not be located in the vicinity of overhead power lines or other

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H) electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

17) Unplug this LCD TV from the wall outlet, and refer servicing to qualified service personnel under the following conditions: a. When the power cord or plug is damaged or frayed.

b. If liquid has been spilled into the LCD TV.

c. If the LCD TV has been exposed to rain or water.

d. If the LCD TV does not operate normally by following the operating instructions.

Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the LCD TV to normal operation.

e. If the LCD TV has been dropped or the cabinet has been damaged.

f. When the LCD TV exhibits a distinct change in performance - this indicates a need for service.

18) When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

19) WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPARATUS TO RAIN OR MOISTURE.

DO NOT PLACE LIQUID CONTAINERS (FLOWER VASES, CUPS, COSMETICS, ETC.) ABOVE THE

SET. (INCLUDING ON SHELVES ABOVE, ETC.)

20) CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS PLUG WITH A RECEPTACLE OR

OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

NOTE:

This equipment is designed to operate in the U.S.A. and other countries where the broadcasting system and AC house current is exactly the same as in the U.S.A.

The marking or retained image on the LCD panel resulting from fixed image use is not an operating defect and as such is not covered by Warranty. This product is not designed to display fixed image patterns for extended periods of time.

Important Information Regarding Use of Video Games, Computers, Captions or Other Fixed Image Displays.

The extended use of fixed image program material can cause a permanent "shadow image" on the LCD panel.

This background image is viewable on normal programs in the form of a stationary fixed image. This type of irreversible LCD panel deterioration can be limited by observing the following steps:

A. Reduce the brightness/contrast setting to a minimum viewing level.

B. Do not display the fixed image for extended periods of time.

C. Turn the power off when not in actual use.

This product utilizes tin-lead solder, and has a fluorescent lamp containing a small amount of mercury. Disposal

of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance: www.eiae.org.

3

Dear Panasonic Customer

Welcome to the Panasonic family of customers.

We hope that you will have many years of enjoyment from your new LCD TV.

To obtain maximum benefit from your set, please read these instructions before making any adjustments, and retain them for future reference.

Retain your purchase receipt, and record the model number and serial number of your set in the space provided on the rear cover of these instructions.

4

For assistance, please call : 1-800-211-PANA (7262) or send e-mail to : [email protected]

or visit us at www.panasonic.com (U.S.A)

For assistance, please call : 787-750-4300 or visit us at www.panasonic.com (Puerto Rico)

For assistance, please call : 1-800-561-5505 or visit us at www.panasonic.ca (Canada)

Federal Communication Commission Information

This equipment has been tested and found to comply with the limits for a TV Broadcast Receiver, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause or receive interference, which can be determined by turning equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the TV antenna.

Increase the separation between TV and other equipment.

Connect TV into separate outlet from other equipment.

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Pursuant to 47CFR, Part 15.21 of the FCC rules, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

Table of Contents

Important Safety Instructions .............................. 2

Installation ............................................................. 6

SUPPLIED ACCESSORIES ................................ 6

Remote control battery installation ...................... 7

Maintenance .......................................................... 7

Connections .......................................................... 8

Connecting the Antenna Cable to the Antenna Terminal .... 8

Antenna cover removal and fitting ....................... 8

Antenna / Cable Connection ................................ 8

Cable cover removal and fitting ......................... 10

How to connect the input terminals ................... 10

How to connect the HDMI Terminal ................... 12

Power ON / OFF ................................................... 13

Connecting the Plug to the Wall Outlet .............. 13

How to Turn the Power On ................................ 13

Location of Controls ........................................... 14

Illuminated Remote Control ............................... 14

Flow Chart of MENU ............................................ 16

Tuning channels

(Automatic channel programming) ............. 18

Tuning channels

(Manual channel programming) ................... 19

ASPECT Controls ................................................ 20

Picture Adjustments ........................................... 21

Position / Size Adjustment ................................. 23

Audio Adjustments ............................................. 24

Lock Feature ........................................................ 25

Closed Captions .................................................. 29

Customizing the VIDEO INPUT labels ............... 30

OTHER ADJUST .................................................. 30

Operating peripheral equipment

using the remote control ........................... 31

Programming The Illuminated

Remote Control Using Access Codes .......... 31

Programming Without A Code

(When the code is not known) ...................... 32

Infrared Codes Index ......................................... 33

IMode Operational Key Chart ............................ 35

Manual de instrucciones [ Resumen ]

Preparación .................................................. 36

Instalación de las pilas en el control remoto .... 36

Conexión ....................................................... 37

Conexión del cable de antena al terminal de entrada de RF .. 37

Desmontaje e instalación de la cubierta de la antena ......... 37

Conexión de antena / cable ........................... 37

Para quitar y colocar la cubierta del cable ..... 38

Como conectar el término del entrada/salida .... 38

Conexión/desconexión de la alimentación ... 39

Conexión de la clavija a la toma de corriente ... 39

Cómo conectar la alimentación ...................... 39

Ubicación de los controles ......................... 40

Control remoto iluminado ............................... 40

Organigrama de menús de televisión ........ 42

Sintonización de canales

(Programaciónautomática de canales) ..... 44

Sintonización de canales

(Programación manual de canales) ...... 45

Troubleshooting .................................................. 46

Specifications ...................................................... 47

5

6

Installation

Receiver Location

Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen.

Use of some types of fluorescent lighting can reduce remote control transmitter range.

Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.

Optional External Equipment

The Video/Audio connection between components can be made with shielded video and audio cables. For best performance, antenna cables should utilize 75 ohm coaxial shielded wire. Cables are available from your dealer or electronic supply store.

Before you purchase any cables, be sure you know what type of output and input connectors your various components require. Also determine the length of cable you’ll need.

For optimum quality picture

When the LCD is exposed to light from outdoors or lighting fixtures, high-contrast pictures may not be displayed clearly. Turn off florescent lamps near the LCD and place in a location not exposed to outdoor light.

How to use the LCD stand

Adjust the stand to your desired angle. The stand angle can be adjusted between 5

°

front to 15

°

back.

SUPPLIED ACCESSORIES

Check the accessories before installations.

Operating Instruction book

Remote Control Transmitter

Batteries for the Remote

Control Transmitter

(2

×

AA size)

Warranty Card

AC Adaptor & AC Cord

Coaxial Antenna Plug

Installation

Remote control battery installation

Replacing batteries

Replace batteries by following the steps below:

Requires two AA batteries.

1. Open the battery cover.

2. Install the batteries as shown in the battery compartment.

(Polarity + or – must match the markings in the compartment).

Two AA size

3. Replace the cover.

Precaution on battery use

Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.

Observe the following precautions:

1. Always use new batteries when replacing the old set.

2. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.

3. Battery replacement is necessary when remote control acts sporadically or stops operating this unit.

Notes:

Do not drop, apply shock to or step on the remote control.

Do not spill water on the remote control.

Do not place objects between the remote control and remote control receiver.

Do not use remote controls for other equipment at the same time.

If the TV does not operate even when operating the remote control from a close range, it is time to replace the batteries.

Refer to the label on back of the remote control for directions on replacing batteries.

Maintenance

To clean this unit, wipe with a soft, dry cloth.

If the surfaces are extremely dirty, use a soft cloth dipped in a soap and water solution or a weak detergent solution.

• Use eyeglass cleaner to remove stubborn dirt from the LCD.

• Never use alcohol, paint thinner or benzine to clean this unit.

• Before using a chemically treated cloth, read the instructions that came with the cloth carefully.

Mild detergent

CAUTION :

If water or similar substances get inside the monitor via the liquid crystal panel surface, a malfunction may result.

7

Connections

Connecting the Antenna Cable to the Antenna Terminal

Antenna Connection - For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended. Antenna Mode must be set to TV.

VHF Antenna UHF Antenna

HPJ

AUDIO OUT

L

R

INPUT

S-VIDEO S-VIDEO

VIDEO

L

AUDIO

VIDEO

L

AUDIO

R R

COMPONENT VIDEO

INPUT

Y

VIDEO

PB

Y

VIDEO

PB

PR PR

L

AUDIO

R

L

AUDIO

R

Mixer

75 Ohm

Coaxial Cable

ANT

Antenna Terminal

(ANT or VHF/UHF)

Coaxial Antenna Plug

1

Antenna cover removal and fitting

1

INPUT

2

S-VIDEO

S-VIDEO

VIDEO

Y

VIDE O

VIDEO

L

AUDIO

L

AUDIO

R

R

COMPON

ENT VID

EO

1

INPUT

2

Y

VIDEO

PB

PB

PR

PR

L

AUDIO

L

AUDIO

R

R

2

Hook

1

Removal

1.Push up hooks and pull the cover slightly towards yourself to disengage the claws (at 4 points).

2.Slowly pull out in the downward direction.

2

Fitting

1.Insert the claws (at 4 points) at the bottom end.

2.Push it until hook is locked.

Note:

To avoid interference appearing on the screen, do not bundle the antenna wire and AC adapter wire together.

Antenna / Cable Connection

Incoming 75 Ohm Cable from Home Antenna / Cable Company

F-Type Antenna Adapter (supplied)

ANT (VHF/UHF)

on the Back of the TV

8

Cable Connection - For reception of cable channels (01 - 125) connect the cable supplied by your local cable company.

Antenna Mode must be set to CABLE. (Refer to Antenna Mode section.)

Note:

Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable converter box is required for proper reception. Check with your local Cable company for its compatibility requirements.

Connections

Antenna Connection (Cable Box, no VCR)

Use this configuration when connecting the TV to a cable TV system using a Cable Box.

HPJ

AUDIO OUT

L

R

INPUT

S-VIDEO S-VIDEO

VIDEO

L

AUDIO

R

VIDEO

L

AUDIO

R

Y Y

VIDEO

PB

VIDEO

PB

PR PR

L L

AUDIO

R

AUDIO

R

CABLE BOX

ANT

ANTENNA TERMINAL

(ANT or VHF/UHF)

ON THE BACK OF

THE TV

OUTPUT INPUT

TERMINALS ON THE BACK OF

THE CABLE BOX

Connect the cable from the Output terminal on the back of the Cable

Box to the ANTENNA terminal on the back of the TV.

Incoming Cable from

Antenna or Cable TV

System

Antenna Connection (Cable Box, and VCR)

Use this configuration when connecting the TV to a cable TV system using a Cable Box and VCR.

CABLE BOX

HPJ

AUDIO OUT

L

R

INPUT

S-VIDEO S-VIDEO

VIDEO

L

VIDEO

L

AUDIO

R

AUDIO

R

COMPONENT VIDEO

INPUT

Y

VIDEO

PB

Y

VIDEO

PB

PR PR

L

AUDIO

R

L

AUDIO

R

OUTPUT INPUT

ANT

ANTENNA TERMINAL

(ANT or VHF/UHF)

ON THE BACK OF

THE TV

TERMINALS ON THE BACK OF

THE CABLE BOX

Connect the cable from the

Output terminal on the back of the Cable Box to the

Antenna Input terminal on the back of the VCR.

VCR

Connect the cable from the antenna or cable system to the

Input terminal on the back of the

CABLE BOX.

Incoming Cable from

Antenna or Cable TV

System

TO VCR

C o n n e c t t h e cable from the

Antenna Output terminal on the back of the VCR to the Antenna terminal (ANT or

VHF/UHF) on the back of the TV.

ANT INPUT

ANT OUTPUT

OUTPUT

S VIDEO VIDEO L-AUDIO-R

Note:

When the antenna cable is connected to the TV antenna terminal via a cable box or VCR, set the TV channel to CH3 or CH4, cable. This does not apply when signal is input from VIDEO INPUT.

9

Connections

Cable cover removal and fitting

Fitting Removal

1

2

HPJ

AUDIO OUT

L

R

1

INPUT

2

S-VIDEO S-VIDEO

VIDEO

L

AUDIO

R

VIDEO

L

AUDIO

R

COMPONENT VIDEO

INPUT

1

Y

VIDEO

2

Y

VIDEO

P B P B

P

R

P

R

L

AUDIO

R

L

AUDIO

R

1. Disengage the claws at the uppermost end.

2. Slowly pull out in the upward direction.

2

HPJ

AUDIO OUT

L

R

1

INPUT

2

S-VIDEO S-VIDEO

VIDEO VIDEO

L L

AUDIO AUDIO

R R

P B

P

R

COMPONENT VIDEO

INPUT

1

Y

VIDEO

P

P

2

Y

VIDEO

B

R

1

L L

AUDIO AUDIO

R R

1. Insert the claws (at 2 points) at the bottom.

2. Push in the TOP.

Note:

Depending on the type of cable used it may not be possible to close the cover. In such cases the cable may be routed through the antenna cover.

How to connect the input/output terminals

Connect camcorder and video game console.

HPJ

AUDIO OUT

L

R

1

INPUT

2

S-VIDEO S-VIDEO

VIDEO

L

VIDEO

L

AUDIO

R

AUDIO

R

COMPONENT VIDEO

INPUT

1

Y Y

2

VIDEO VIDEO

PB PB

PR PR

L

AUDIO

R

L

AUDIO

R

CAMCORDER VIDEO GAME CONSOLE

HPJ

10

AUDIO OUT

L

R

1

INPUT

2

S-VIDEO S-VIDEO

VIDEO VIDEO

L L

AUDIO AUDIO

R R

COMPONENT VIDEO

INPUT

(Optional)

S-VIDEO cable

VIDEO cable

S-Video

OUT

Video

OUT L

Audio

OUT R

Connections

Connect VCR and other peripheral equipment

(Super-VHS VCR)

HPJ

AUDIO OUT

L

R

INPUT

1 2

S-VIDEO S-VIDEO

VIDEO

L

VIDEO

L

AUDIO

R

AUDIO

R

COMPONENT VIDEO

INPUT

Y

1 2

Y

VIDEO VIDEO

PB PB

PR PR

L

AUDIO

R

L

AUDIO

R

L

Audio

IN

R

L

Audio

OUT R

Video

OUT

S-Video

OUT

HPJ

AUDIO OUT

L

R

1

INPUT

2

S-VIDEO S-VIDEO

VIDEO VIDEO

L L

AUDIO AUDIO

R R

COMPONENT VIDEO

INPUT

1 2

Y Y

VIDEO VIDEO

P

B

P

B

P

R

P

R

L L

AUDIO AUDIO

R R

S-VIDEO cable

VIDEO

AUDIO

Connect the

S-VIDEO or

VIDEO

Terminal

(DVD/STB)

COMPONENT VIDEO OUT

Y Pb Pr

Connection example component VIDEO

INPUT1 connection or component VIDEO

INPUT2 connection.

L

Audio

OUT

R

VIDEO

Connection example

INPUT1 connection or

INPUT2 connection.

AUDIO

Notes:

When connecting video cables, priority is given to the S-Video cable when the S-Video input terminal and the video input terminal are connected at the same time.

The volume control output of the LCD TV will be fixed.(SOUND,ADJUST, VOLUME UP/DOWN and

SURROUND ON/OFF are not functional for output signals from the AUDIO OUT terminals.)

11

How to connect the HDMI Terminal

HDMI

1 (HDMI : High Definition Multimedia Interface) is the first all digital consumer electronics A/V interface that supports uncompressed standard. One jack supports both video and audio information.

This HDMI

1 input can be connected to an EIA/CEA-861/861B

2 compliant consumer electronic device, such as a Set Top Box or DVD player equipped with HDMI or DVI output connection.

By inputting a High-bandwidth Digital Content Protection (HDCP) high-definition picture source to the HDMI terminal of this television, high-definition pictures can be displayed on the screen in their digital form.

HDMI Cable (not included)

HPJ

AUDIO OUT

L

R

INPUT

S-VIDEO S-VIDEO

VIDEO

L

VIDEO

L

AUDIO

R

AUDIO

R

Y

VIDEO

PB

Y

VIDEO

PB

PR PR

L

AUDIO

R

L

AUDIO

R

Set Top Box

Audio Cable

(not included)

HDMI or DVI signal out

DVD player

If the external device has DVI output only, use a HDMI-DVI conversion cable

3

to connect to the HDMI jack on the LCD.

Also, connect the Audio out signal from the external device.

(Set Top Box or DVD player) to the AUDIO IN 4 jacks beside the HDMI input.

Applicable VIDEO Signal

This model support following format.

Please adjust the format of connecting equipment.

1080i

480P

480i

No. of dots (H

×

V)

1,920

×

1,080i

720

×

480P

640

×

480P

720(1,440)

×

480i

Vertical scanning frequency(Hz)

59.94/60

59.94/60

59.94/60

59.94/60

This input terminal is not intended for use with computers.

AUDIO signal (L.PCM)

When the digital sound signal is included at connecting HDMI equipment, L.PCM sound is available.

Sampling frequency

48KHz / 44.1KHz / 32 KHz

Notes:

(1) This HDMI connector is Type A.

(2) If you cannot display the picture because your Digital Set Top Box does not have a Digital OUT terminal

Output setting, use the component Video input (or the S video Input or Video Input). In this case the picture will be displayed as an analog signal.

1. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

2. EIA/CEA-861/861B profiles compliance covers profiles for transmission of uncompressed digital video including high bandwidth digital content protection.

3. HDMI-DVI conversion cable part no. (TY-SCH03DH):available on Panasonic Website (USA only)

(www.panasonic.com)

4. AUDIO-IN, Please refer to page 24. (HDMI-IN)

12

Power ON / OFF

Connecting the Plug to the Wall Outlet

2

3

1

Note:

The TV’s power cord must first be plugged into the wall outlet.

How to Turn the Power On

Main POWER switch

Press the Main POWER switch on the top of TV to turn the set on.

POWER-ON: Green

When the set is on or in standby mode press the Main

POWER switch on the TV to turn the set off.

POWER-OFF: No light

Example: The screen below is displayed for a while after the TV is turned on. (setting condition is an example.)

ZOOM

CH 6

STEREO

SAP

MONO

SAP

POWER

VCR

DBS/CBL

DV

D

TV

MENU

VOL

CH

O K

VOL

CH

RETURN

EXIT

POWER

Press the POWER button on the remote control to turn the TV off: Red (standby)

Press the POWER button on the remote control to turn the TV on: Green

Note:

The TV will still consume some power as long as the power cord is still plugged into the wall outlet.

13

Location of Controls

Illuminated Remote Control

Power button

Press to turn the TV ON or OFF.

Note: The TV’s power cord must first be plugged into the wall outlet and then turned on at the POWER switch (standby mode).

Mode Selection buttons

VCR Mode Selection for Remote

Control

Digital Broadcasting Satellite for Remote

Control / Cable TV Mode Selection for

Remote Control

TV Mode Selection for

Remote Control

TV

VCR

DBS/CBL

DVD

Digital Video Disc Mode

Selection for Remote Control

R-TUNE

R-TUNE button

Switches to previously viewed channel or video mode.

Operation of other Device

REW FF

Device

VCR

CABLE/DBS

DVD

VCR REW/FF

-

Skip Search REW/FF

REC

Device

VCR

CABLE/DBS

DVD

VCR RECORD

-

-

PLAY

PLAY

-

PLAY

ASPECT

TV/VCR

TV/VCR Switch

STB-ASPECT

Open / Close

PAUSE

Pause

-

Pause

VCR/DBS CH

VCR CH up/down

PAGE up/down

Slow/

+

/--

STOP

STOP

-

STOP

ASPECT

TV/VCR

ASPECT button

Change of screen size (See page 20).

JUST ZOOM FULL NORMAL

14

Location of Controls

SAP button

Selects Audio mode (See page 24).

STEREO SAP MONO

SAP

POWER

VCR

DBS/CBL

DV

D

TV

CH

O K

VOL VOL

CH

MENU

RETURN

EXIT

TV/VIDEO RECALL MUTE GUIDE

1 2 3

4 5 6

7

R-TUNE

REW

8

0

PLAY

9

SLEEP

PROG

FF

PAUSE STOP

ASPECT

TV/VCR

REC

VCR/DBS CH

T V

Changes to the next channel up

Moves cursor upward during menu mode.

Reduces volume

Moves cursor to the left during menu mode.

Displays menu

Press to access

TV, DTV, DBS or

DVD menus.

CH

O K

Increases volume

Moves cursor to the right during menu mode.

VOL VOL

MENU

CH

RETURN

EXIT

Changes to the next channel down

Moves cursor downward during menu mode.

Press to Return to previous

MENU or EXIT from menu.

The input mode changes each time this button is pressed.

Press this button to mute the sound, press again to cancel the mute

TV/VIDEO RECALL MUTE GUIDE

GUIDE button for DBS.

Press to display the current system status, for example, Aspect mode, Channel number, Stereo mode, Picture menu, TV/VIDEO,

Power save, Off timer and Color system.

Direct program number selection buttons

SLEEP

PROG

PROG dash button / SLEEP TIMER button

Program dash channel numbers for DTV and DBS.

Sleep timer (MINUTES)

0 30 60 90

15

Flow Chart of MENU

1

All adjustments and setting functions available in this set can be made using the menu buttons.

The menu screen is composed of 2 menus: the ADJUST menu and the SET UP menu.

2

Press to display MENU screen, press again to clear.

SAP

MENU

ADJUST SET UP

PICTURE

PICTURE ADJUST

POSITION / SIZE

AUDIO

AUDIO ADJUST

POWER

TV

VCR

A

O K

DBS/CBL

DV

D

RETURN

EXIT

MENU selection

MENU

ADJUST SET UP

PICTURE

PICTURE ADJUST

POSITION / SIZE

AUDIO

AUDIO ADJUST or

MENU

ADJUST SET UP

LANGUAGE

PROGRAM CH

LOCK

CLOSED CAPTION

INPUT LABEL

OTHER ADJUST

TV/VIDEO RECALL MUTE GUIDE

1 2

4 5

7

R-TUNE

8

0

3

6

9

SLEEP

PROG

MENU

ADJUST SET UP

PICTURE

PICTURE ADJUST

POSITION / SIZE

AUDIO

AUDIO ADJUST

VOL

CH

O K

VOL

CH

Please refer to the On Screen Help

An On Screen Help box is displayed whenever a menu is displayed on the TV. This Help box indicates which keys on the remote control are used to navigate the menu shown. See above for descriptions of button functions.

ON SCREEN HELP

‘Instruction’ box

LANGUAGE

LANGUAGE ENGLISH

CHANGE

RETURN

MENU

ADJUST SET UP

LANGUAGE

PROGRAM CH

LOCK

CLOSED CAPTION

INPUT LABEL

OTHER ADJUST

16

Flow Chart of MENU

Press to select the desired MENU (ADJUST or SET UP).

VOL

CH

O K

VOL

CH

Press to select each item.

Press to display each adjustment screen.

Proceed to the adjustment.

RETURN

EXIT

To return to previous screen :

Press to return.

MENU

To end adjustments : Press to exit from the MENU screen.

This returns the set to the normal viewing condition.

Press to display each adjustment screen.

O K

RETURN

EXIT

Press the RETURN button to return to previous screen.

TO PICTURE ADJUST menu

PICTURE ADJUST

NORMALIZE

PIC MODE

BACK LIGHT

PICTURE

BRIGHTNESS

COLOR

STANDARD

+ 20

+ 20

0

TINT

SHARPNESS

AI PICTURE

- 1

0

0

(See page 21)

POSITION/SIZE

NORMAL

NORMALIZE

SIZE

1

RETURN

TO AUDIO ADJUST menu

AUDIO ADJUST

NORMAL

MODE

BASS

TREBLE

BALANCE

DYNAMIC

+ 10

+ 8

0

SURROUND

HDMI IN

OFF ON

STEREO SAP MONO

AUTO

Press to display each adjustment screen.

O K

TO LANGUAGE

LANGUAGE

LANGUAGE ENGLISH

Allows you to select the language used for On

Screen Displays.

TO PROGRAM

CHANNELS

PROGRAM CHANNELS

MODE

TV CABLE

AUTO PROGRAM

MANUAL PROGRAM

(See page 18,19)

(See page 24)

TO LOCK selection screen

LOCK

BLOCK PROGRAMS

U. S. MOVIES

STATUS OFF ON

CHANGE SETTING

ENTER CODE FIRST

RETURN

EXIT

Press the RETURN button to return to previous screen.

TO CLOSED

CAPTION

CLOSED CAPTION

ON MUTE

MODE

NO

OFF

(See page 29)

TO OTHER ADJUST

screen

OTHER ADJUST

VIDEO NR

OFF ON

3D Y/C

OFF ON

COLOR MATRIX

SD HD

POWER SAVE

STANDARD

(See page 30)

(See page 25)

TO INPUT LABEL selection screen

INPUT LABEL

COMPONENT1 COMPONENT1

COMPONENT2

VIDEO1

COMPONENT2

VIDEO1

VIDEO2

HDMI

VIDEO2

HDMI

(See page 30)

17

Tuning channels

(Automatic channel programming)

Automatically scans all TV channels and stores them in memory.

1

Turn the Power on and press the TV/VIDEO button to display the TV channel.

2

Press the MENU button to display the MENU screen and select SET UP.

MENU

ADJUST

Press to select PROGRAM CH.

VOL

CH

O K

CH

VOL

Press to display the PROGRAM

CHANNELS screen.

SET UP

LANGUAGE

PROGRAM CH

LOCK

CLOSED CAPTION

INPUT LABEL

OTHER ADJUST

Press to select MODE.

3

VOL

CH

O K

VOL

CH

Press to select TV or CABLE.

PROGRAM CHANNELS

MODE

TV CABLE

AUTO PROGRAM

MANUAL PROGRAM

4

VOL

CH

O K

VOL

CH

Press to select AUTO PROGRAM.

Press to display the confirmation screen.

AUTO PROGRAM

Activate

"AUTO PROGRAM?"

YES NO

5

VOL

CH

O K

VOL

CH

MENU

Press to select YES.

Press to select NO.

Press to run AUTO PROGRAM.

AUTO PROGRAM

In "AUTO PROGRAM"

CHANNEL

59

MENU

STOP

Channels will automatically advance until all channels have been scanned. Channel numbers with a video signal present will be stored in the Channel Scan Memory.

Press to exit from the MENU screen.

This returns the set to the normal viewing condition.

Notes:

When buttons are pressed with AUTO PROGRAM running, the TV set will return to normal viewing.

(Channels searched up to this point are added.)

After AUTO PROGRAM is finished, the lowest channel number added will be received.

When there are no receivable channels, channel 69 is displayed for TV and channel 125 is displayed for cable TV.

18

Tuning channels

(Manual channel programming)

Use this setting when changing setting of receiving channels or changing the channel display.

Turn the TV on and select the broadcast channel. Follow the steps on the previous page to display the

PROGRAM CHANNELS screen.

1

VOL

CH

O K

VOL

CH

Press to select MANUAL PROGRAM.

Press to display the MANUAL

PROGRAM screen.

PROGRAM CHANNELS

MODE TV CABLE

AUTO PROGRAM

MANUAL PROGRAM

MANUAL PROGRAM

ENTER CHANNEL

121

DELETE ADD

CH SELECT

RETURN

Adding or deleting channels

2

VOL

CH

O K

VOL

CH

Press to select channel

(or number keys).

MANUAL PROGRAM

ENTER CHANNEL

121

DELETE ADD

CH SELECT

RETURN

3

VOL

CH

O K

VOL

CH

Press to add channels to memory (Channel number turns blue).

Press to delete channels from memory

(Channel number turns yellow).

4

Repeat steps 2 and 3 to continue adding or deleting channels.

MENU

Press to exit from the MENU screen.

This returns the set to the normal viewing condition.

19

ASPECT Controls

The color monitor will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture.

REW

PAUSE

0

PLAY

STOP

FF

REC

ASPECT

TV/VCR

ASPECT button

The aspect mode changes each time the ASPECT button is pressed.

JUST ZOOM FULL

NORMAL

ASPECT VCR/DBS CH

Note:

When a 1080i signal is being received, the mode is set to

FULL, and aspect switching is not possible.

Mode

NORMAL

JUST

ZOOM

4

4

4

Picture

NORMAL

4

3

Explanation

Normal mode will display a 4:3 picture at its standard 4:3 size.

3

3

3

JUST

16

ZOOM

16

9

JUST mode will display a 4:3 picture at its maximum size but with aspect correction applied to the sides of the screen so that elongation is only apparent at the left and right edges of the screen. The size of the picture will depend on the original signal.

ZOOM mode magnifies the central section of the picture.

9

FULL

16

9

FULL will display the picture at its maximum size but with slight elongation.

FULL

20

Picture Adjustments

1

2

Press the MENU button to display the

MENU screen and select ADJUST.

PIC MODE

VOL

CH

O K

VOL

CH

VOL

CH

O K

VOL

CH

Press to select

PICTURE

ADJUST.

MENU

ADJUST SET UP

PICTURE

PICTURE ADJUST

POSITION / SIZE

AUDIO

AUDIO ADJUST

PICTURE ADJUST PAGE 1/2

NORMALIZE

PIC MODE VIVID

+ 30

BACK LIGHT

PICTURE

BRIGHTNESS

+ 30

0

0

COLOR

TINT

SHARPNESS

0

+10

AI PICTURE OFF ON

Press to display the PICTURE

ADJUST screen.

Press to select the menu to adjust.

Select the desired level by looking at the picture behind the menu.

PICTURE ADJUST PAGE 2/2

COLOR TEMP

NORMAL is displayed at default.

PICTURE MODE is stored for TV, VIDEO1, VIDEO2, COMPONENT1,

COMPONENT2 and HDMI individually.

STANDARD CINEMA VIVID

COOL

MODE

STANDARD

CINEMA

VIVID

Function

Displays standard image.

Ideal for watching movies in a dark room.

Displays a clear screen with contrast of light and dark.

BACK LIGHT, PICTURE, BRIGHTNESS, COLOR, TINT, SHARPNESS, AI PICTURE, COLOR TEMP

You can change the level of each Item (BACK LIGHT, PICTURE, BRIGHTNESS, COLOR, TINT,

SHARPNESS, AI PICTURE and COLOR TEMP) for each MENU (STANDARD, CINEMA, and VIVID ) according to your personal preference.

Item Function

BACK LIGHT

PICTURE

BRIGHTNESS

COLOR

TINT

SHARPNESS

AI PICTURE

COLOR TEMP

Luminance of the back light is adjusted.

Selects proper brightness and density for the room.

Adjusts for easier viewing of dark pictures such as night scenes.

Adjusts the level of color.

Adjusts for flesh tone color.

Adjusts the degree of sharpness.

Displays black and white colors more clearly when turned ON.

Increase or decrease WARM (red) and COOL (blue) colors to suit personal preference.

To reset to standard setting :

VOL

CH

O K

VOL

CH

Press to select

NORMALIZE.

Press OK.

PICTURE ADJUST PAGE 1/2

NORMALIZE

PIC MODE

BACK LIGHT

PICTURE

BRIGHTNESS

STANDARD

+ 20

+ 20

0

COLOR

TINT

- 1

0

21

Picture Adjustments

3

ADVANCED ADJUST

Press to select PIC MODE.

Select STANDARD or CINEMA.

VOL

CH

O K

VOL

CH

VOL

CH

O K

VOL

CH

PICTURE ADJUST PAGE 1/2

NORMALIZE

PIC MODE

BACK LIGHT

STANDARD

+ 20

PICTURE

BRIGHTNESS

+ 20

0

COLOR

TINT

- 1

0

SHARPNESS

0

AI PICTURE OFF ON

Press down to PAGE 2 and select

ADVANCED ADJUST.

Press to select ADVANCED

ADJUST ON.

COLOR TEMP

NORMAL

ADVANCED ADJUST

OFF ON

VOL

CH

O K

VOL

CH

VOL

CH

O K

VOL

CH

Press to go to NEXT PAGE.

ADVANCED ADJUST will be shown.

ADVANCED ADJUST

NORMAL

BLACK EXTENSION

WHITE CHAR CORR

MPEG NR

+ 8

+ 8

0

Press to select the menu to adjust.

Select the desired level by looking at the picture behind the menu.

NORMAL is displayed at default.

22

Item

BLACK EXTENSION

WHITE CHAR CORR

MPEG NR

Function

Contrast level will be improved.

It makes white characters brighter.

Noise unique to DVD, STB etc will be reduced.

Position / Size Adjustment

This function will adjust the picture position / size for easy viewing.

1

Press MENU button to display MENU screen and select adjust.

Press to select POSITION/SIZE.

VOL

CH

O K

VOL

CH

MENU

ADJUST SET UP

PICTURE

PICTURE ADJUST

POSITION / SIZE

AUDIO

AUDIO ADJUST

Press to display POSITION/SIZE control.

2

[ Picture Position Adjustment ]

It will work for “ZOOM” mode only.

POSITION/SIZE

NORMAL

NORMALIZE

SIZE

1

RETURN

Press to move picture vertically for the best view.

ZOOM

VOL

CH

O K

VOL

CH

3

[ Picture Size Adjustment ]

It will work for “NORMAL” and “JUST” mode only.

Press to select.

size 1: reduced black bar.

size 2: widened black bar.

To return to previous screen :

RETURN

EXIT

Press to return.

Press OK.

To reset to standard setting :

VOL

CH

O K

VOL

CH

Size1

Size2

23

Audio Adjustments

1

2

Press the MENU button to display the MENU screen and select ADJUST.

VOL

CH

O K

VOL

CH

Press to select AUDIO ADJUST.

MENU

ADJUST SET UP

PICTURE

PICTURE ADJUST

POSITION / SIZE

AUDIO

AUDIO ADJUST

Press to display the AUDIO ADJUST screen.

VOL

CH

O K

VOL

CH

Press to select the menu to adjust.

Select the desired level by listening to the sound.

NORMAL is displayed at default.

AUDIO ADJUST

NORMAL

MODE

BASS

TREBLE

DYNAMIC

+ 10

+ 8

BALANCE

SURROUND

HDMI IN

0

OFF ON

STEREO SAP MONO

AUTO

MODE

AUTO STANDARD DYNAMIC

MODE

AUTO

STANDARD

DYNAMIC

Function

Automatically adjusts quiet sound and loud sound for ease of listening.

Emits the original sound.

Gives contrast to sound.

BASS, TREBLE, BALANCE, SURROUND

You can change the level of each Item ( BASS,

TREBLE, BALANCE and SURROUND ) for each

MODE (AUTO, STANDARD and DYNAMIC ) according to your personal preference.

Item

BASS

TREBLE

BALANCE

SURROUND

Function

Adjusts low sounds

Adjusts high sounds

Adjusts left and right volume

To enjoy a concert hall effect, turn SURROUND to ON when a stereo signal is available.

Selecting STEREO/SAP/MONO

STEREO SAP MONO

Note:

Red display : With signal

White display : No signal

White display : MONO

MODE

STEREO

SAP

MONO

Function

Two channel Audio reception.

Second Audio Programming

( typically used for bilingual audio ).

Use when stereo signal is weak.

HDMI IN

Perform input switching of analog audio input (for DVI) and digital audio input (for HDMI) when using the HDMI terminal.

AUTO DIGITAL ANALOG

AUTO

Set use of analog audio input when digital audio signal is not available.

DIGITAL

Forces use of digital audio input signal transmitted via the HDMI terminal.

ANALOG

Forces use of analog audio input signal transmitted via separate RCA terminals.

24

Lock Feature

In the United States, the V-CHIP consists of two rating systems, which are MPAA

(MOTION PICTURE) and TV PARENTAL GUIDELINES. Its function is to block programs by the rating data in the XDS data packets sent from broadcasting stations. The user can select which rating programs should be blocked by the LOCK MENU options.

TV

A

O K

SLEEP

PROG

DV

D

TV/VIDEO RECALL MUTE GUIDE

Press the MENU button to display the MENU screen and select SET UP.

Press to select LOCK.

MENU

ADJUST SET UP

VOL

CH

O K

VOL

Press to display the

LOCK screen.

CH

Input code

Enter any 4-digit number as a password.

These numbers will be needed when deactivating the LOCK function.

LANGUAGE

PROGRAM CH

LOCK

CLOSED CAPTION

INPUT LABEL

OTHER ADJUST

While entering a code, by pressing the up or down buttons you can input a new code again.

LOCK

BLOCK PROGRAMS

U. S. MOVIES

STATUS OFF ON

CHANGE SETTING

ENTER CODE FIRST

After entering your secret code for the first time, the onscreen display will change to CHANGE CODE. And you can change the

Input code.

Note: Use a code that is easy to remember and record it in a safe place.

1

Selecting broadcasts to lock.

Press to select BLOCK PROGRAMS.

LOCK

BLOCK PROGRAMS

U. S. TV PROGRAMS

STATUS OFF ON

CHANGE SETTING

CHANGE CODE

VOL

CH

O K

CH

VOL

Press to select U.S MOVIES, U.S. TV

PROGRAMS, CANADIAN ENGLISH or CANADIAN FRENCH.

U.S. MOVIES U.S. TV PROGRAMS

LOCK

BLOCK PROGRAMS

U. S. TV PROGRAMS

STATUS OFF ON

CHANGE SETTING

CHANGE CODE

CANADIAN ENGLISH CANADIAN FRENCH

2

VOL

CH

O K

VOL

Press to select STATUS.

Press to select ON or OFF.

LOCK

BLOCK PROGRAMS

U. S. TV PROGRAMS

STATUS OFF ON

CHANGE SETTING

CHANGE CODE

CH

3

VOL

CH

O K

VOL

CH

Press to select CHANGE SETTING.

Press to display the next screen.

LOCK

BLOCK PROGRAMS

U. S. TV PROGRAMS

STATUS OFF ON

CHANGE SETTING

CHANGE CODE

25

Lock Feature for U.S.TV PROGRAM to lock

1

2

VOL

CH

O K

VOL

CH

Press to select VIEW NR PROGRAMS?.

Press to select NO or YES.

NO : Cannot view programs with NR signals.

YES : Can view programs with NR signal.

Press to select SETTING.

U. S. TV PROGRAMS

VIEW NR PROGRAMS?

NO YES

SETTING BASIC

TV—Y

TV—Y7 FV

TV—G

TV—PG

TV—1 4

V

V

TV—MA V

S

S

S

L

L

L

D

D

Press to select BASIC or DETAILED.

VOL

CH

O K

VOL

CH

BASIC DETAILED

3

VOL

CH

O K

VOL

CH

Press to select rating.

BASIC : Change the selected title.

DETAILED : The cursor selecting the title can be moved to select options displayed on the right.

Press to lock or unlock the rating.

Lock: Red

Unlock : Green

U. S. TV PROGRAMS

VIEW NR PROGRAMS?

NO YES

SETTING BASIC

TV–Y

TV–Y7 FV

TV–G

TV–PG

TV–1 4

TV–MA

V

V

V

S

S

S

L

L

L

D

D

Locking and unlocking

When a title field is selected, all ratings below this rating are selected.

When options within an option field are selected, ratings below this rating within the same field are selected.

Ratings displayed in green are unlocked and those displayed in red are blocked programs.

1. Ratings for children: These ratings are divided into ranks as follows.

TV-Y

TV-Y7 FV TV-Y TV-Y7 TV-Y7-FV

2. Ratings for teenagers: These ratings can be created out of these major categories to form various combinations. These combinations are described in the below diagram. Ratings for all ages are on top and ratings for adults are on the bottom.

TV-G

TV-PG

TV-14

TV-MA

V

V

V

S

S

S

L

L

L

D

D

To return to previous screen :

To end adjustments :

26

RETURN

EXIT

MENU

Press to return.

Press to exit from the MENU screen.

This returns the set to the normal viewing condition.

Lock Feature for U.S.MOVIES to lock

1

VOL

CH

O K

VOL

CH

Press to select VIEW NR PROGRAMS?.

Press to select NO or YES.

U. S. MOVIES

VIEW NR PROGRAMS?

NO YES

NO : Cannot view programs with NR signals.

YES : Can view programs with NR signal.

2

VOL

CH

O K

VOL

CH

Press to select rating.

Press to lock or unlock the rating.

Lock: Red

Unlock : Green

Rating

G : General audience

PG : Parental guidance suggested

PG-13 : Parental guidance needed

R

under 13 years old

: Restricted

NC17 : No one under 17 is admitted

X : Pornography

U. S. MOVIES

VIEW NR PROGRAMS?

NO YES

for CANADIAN ENGLISH / CANADIAN FRENCH to lock

1

Press to select VIEW E PROGRAMS?.

VOL

CH

O K

VOL

CH

Press to select NO or YES.

CANADIAN ENGLISH

VIEW E PROGRAMS?

NO YES

C

C8+

G

PG

14+

18+

2

VOL

CH

O K

VOL

CH

Press to select rating.

Press to lock or unlock the rating.

Lock: Red

Unlock : Green

CANADIAN ENGLISH

VIEW E PROGRAMS?

NO YES

C

C8+

G

PG

14+

18+

CANADIAN FRENCH

VIEW E PROGRAMS?

NO YES

G

8 ANS+

13ANS+

16ANS+

18ANS+

CANADIAN FRENCH

VIEW E PROGRAMS?

NO YES

G

8 ANS+

13ANS+

16ANS+

18ANS+

27

Lock Feature

CANADIAN ENGLISH RATINGS CHART

E

C

C8+

G

PG

14+

18+

Exempt - Exempt programming includes: news, sports, documentaries and other information programming, talk shows, music videos, and variety programming.

Programming intended for children under age 8. No offensive language, nudity or sexual content.

Programming generally considered acceptable for children 8 years and over. No profanity, nudity or sexual content.

General programming, suitable for all audiences.

Parental Guidance suggested. Some material may not be suitable for children.

Programming contains themes or content which may not be suitable for viewers under the age of 14. Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and early teens.

18+ years old. Programming restricted to adults. Contains constant violence or scenes of extreme violence.

CANADIAN FRENCH RATINGS CHART

E

G

8 ANS+

13ANS+

16ANS+

18ANS+

Exempt - Exempt programming.

General - Programming intended for audience of all ages. Contains no violence, or the violence content is minimal or is depicted appropriately.

8+ General - Not recommended for young children. Programming intended for a broad audience but contains light or occasional violence. Adult supervision recommended.

Programming may not be suitable for children under the age of 13 - Contains either a few violent scenes or one or more sufficiently violent scenes to affect them. Adult supervision strongly suggested.

Programming may not be suitable for children under the age of 16 - Contains frequent scenes of violence or intense violence.

18+ years old. Programming restricted to adults. Contains constant violence or scenes of extreme violence.

To return to previous screen :

To end adjustments :

RETURN

EXIT

MENU

Press to return.

Press to exit from the MENU screen.

This returns the set to the normal viewing condition.

28

Closed Captions

This unit has a built in decoder that provides a visual depiction of the audio portion of a television program in the form of written words across the screen (white or colored letters on a black background). It allows the viewer to read the dialogue of a television program or other information.

1

Press the MENU button to display the MENU screen and select SET UP.

Press to select CLOSED CAPTION.

CH

O K

VOL VOL

MENU

ADJUST SET UP

CH

Press to display the CLOSED

CAPTION screen.

LANGUAGE

PROGRAM CH

LOCK

CLOSED CAPTION

INPUT LABEL

OTHER ADJUST

2

CC ON MUTE

Activates the On-Screen Closed Caption feature, when the MUTE button on the Remote Control is pressed. To deactivate, press the MUTE button again.

Note:

This feature functions when the Closed Caption Mode is in the “OFF” position.

The program being viewed must be broadcast with Closed Caption.

VOL

CH

O K

VOL

CH

Press to select CC ON MUTE.

Press to select from the following:

NO (OFF) C1 C2

CLOSED CAPTION

ON MUTE

MODE

NO

OFF

3

CC MODE

Activates the On-Screen Closed Caption feature. When activated this feature will remain on until

OFF is selected in this menu.

Press to select CC MODE.

CLOSED CAPTION

ON MUTE NO

CH

O K

Press to select from the following:

MODE

OFF

VOL VOL

CH

OFF C1 C2

CAPTION OFF -

CAPTION C1 -

CAPTION C2 -

Recommended mode when Closed Caption is not being used.

For video related information that can be displayed (up to 4 lines of script strategically placed on the television screen so that it does not obstruct relevant parts of the picture).

Another mode used for video related information.

To return to previous screen :

To end adjustments :

RETURN

EXIT

MENU

Press to return.

Press to exit from the MENU screen.

This returns the set to the normal viewing condition.

29

Customizing the VIDEO INPUT labels

Display for each VIDEO INPUT can be changed to match with the connected device

(VCR, DVD Player etc.).

MENU

ADJUST SET UP

1

Press the MENU button to display the MENU screen and select SET UP.

Press to select INPUT LABEL.

LANGUAGE

PROGRAM CH

LOCK

Press to display the INPUT LABEL screen.

CLOSED CAPTION

CH

O K

VOL

CH

VOL

INPUT LABEL

OTHER ADJUST

2

VOL

CH

A

CTION

VOL

CH

Press to select the VIDEO INPUT.

COMPONENT1 COMPONENT2

HDMI VIDEO2 VIDEO1

Press to change the INPUT LABEL.

Each INPUT LABEL has the following choices.

INPUT LABEL

COMPONENT1 COMPONENT1

COMPONENT2

VIDEO1

VIDEO2

HDMI

COMPONENT2

VIDEO1

VIDEO2

HDMI

COMPONENT1(COMPONENT2, VIDEO1, VIDEO2 or HDMI)

[BLANK]

DTV DVD

VCR

GAME

LD

OTHER ADJUST

1

2

Press the MENU button to display the MENU screen and select SET UP.

Press to select OTHER ADJUST.

MENU

ADJUST SET UP

VOL

CH

O K

CH

VOL

Press to access OTHER ADJUST.

LANGUAGE

PROGRAM CH

LOCK

CLOSED CAPTION

INPUT LABEL

OTHER ADJUST

3

Press to select the item that you would like to change.

CH

O K

Press to select desired condition.

VOL VOL

OTHER ADJUST

VIDEO NR

CH

OFF ON

VIDEO NR

Reduce video noise in the picture.

Selection condition:

ON OFF

3D Y/C FILTER

Minimizes noise and cross color in the picture.

Not available for COMPONENT VIDEO.

Selection condition:

ON OFF

3D Y/C

COLOR MATRIX

OFF ON

SD HD

POWER SAVE

STANDARD

COLOR MATRIX

Displays input signals (480p signals) in a natural color.

Automatically adjusts color parameters for HD (high definition) and SD (standard definition).

Selection condition:

SD HD

POWER SAVE

The POWER SAVE will be suitable for watching at night and power consumption will be reduced.

selection condition:

STANDARD

SAVING

30

Operating peripheral equipment using the remote control

Programming The Illuminated Remote Control Using Access Codes

The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component function buttons for TV, VCR, DBS/CABLE or DVD. Follow the procedures for programming your Remote Control with or without a code for the component.

Determine the manufacturer of the component and look in the table for the code.

1

Confirm that the external component is plugged in and operating.

2

Turn the component off.

3

POWER

+

VOL

CH

O K

VOL

CH

Press POWER and OK together, for at least 5 seconds.

After 5 seconds, all the illuminated mode keys will begin to flash.

Release the POWER and OK keys.

4

TV

VCR

DBS/CBL

DV

D

Press the mode key.

The mode key will illuminate steadily, all others will go out.

5

6

1

4

7 8

0

2

5

3

6

9

POWER

Enter the 3-digit component code using the Remote Control numeric keypad.

Press the Remote Control

POWER

to test the component. If the procedure is successful, the component will turn on.

Default Modes For Remote Control

Device Operates

TV

VCR

DBS/CBL

DVD

TV (Panasonic Only)

VCR (Preset)

DBS (Preset), CABLE (Preset)

DVD (Preset)

Default

Panasonic TV Codes

Panasonic VCR Codes

Panasonic DBS Codes

Panasonic DVD Codes

Helpful Hints: Unsuccessful Code

If the component does not operate with the Remote Control, repeat the procedure using another code. (Some brands have multiple codes).

If an incorrect code is entered, or if the procedure takes longer than 30 seconds,the programming will fail.

31

Operating peripheral equipment using the remote control

Programming Without A Code (When the code is not known)

This procedure searches all codes and is called the “sequence method.”

1

Confirm that the external component is plugged in and on.

2

Turn the component off.

3

POWER

+

VOL

CH

O K

VOL

CH

Press POWER and OK together,

for at least 5 seconds.

After 5 seconds, all the illuminated mode keys will begin to flash.

Release the POWER and OK key.

SAP

POWER

VCR

DBS/CBL

DV

D

TV

VOL

CH

O K

VOL

CH

MENU

RETURN

EXIT

TV/VIDEO RECALL MUTE GUIDE

1 2 3

4 5

PAUSE STOP

6

7

R-TUNE

REW

8

0

PLAY

9

SLEEP

PROG

FF

REC

ASPECT

TV/VCR

VCR/DBS CH

4

5

TV

VCR

DBS/CBL

DV

D

Press the mode key.

The mode key will illuminate steadily, all others will go out.

VOL

CH

O K

VOL

CH

Press to move forward to the next code, or to move backward.

T V

6

POWER

Press the Remote Control

POWER

to test the component. If the procedure was successful, the component will turn on.

Note:

Repeat the above steps until the component code is found. It may take many attempts before the correct code is found.

7

VOL

CH

O K

VOL

CH

After the code is found, press OK to store the code.

Note:

The step and set mode will start from the current device (not the beginning of the list, except for the first time).

32

Operating peripheral equipment using the remote control

Infrared Codes Index

The remote control is capable of operating many brands of peripheral equipment. Refer to pages 31 and 32 for programming procedures.

Note: The remote control memory is limited and therefore some models may not operate. The remote control is not designed to control all features available in all models.

Note: After entering the proper infrared code, press the desired Mode Selection Button on the remote control.

Refer to pages 14 and 31 - 32 for details on operating peripheral equipment using the remote control.

Infrared Remote Codes for Specific Components

Helpful Hint: Write down the code numbers for your components in the space provided below. This will serve as a handy reference whenever you need to reprogram your remote control.

CABLE VCR DBS

Other Component

VCR

VCR

Other Component Other Component

Codes for VCR

Brand Code

Admiral 335

Aiwa

Akai

332

314, 315, 316, 329

Audio Dynamic 311, 339

Bell &Howell

Broksonic

Canon

Citizen

Craig

305, 313

320, 326

323, 325

306

305, 306, 329

Curtis Mathes 324, 345

Daewoo 301, 324, 343

DBX

Dimensia

310, 311, 339

345

Emerson

Fisher

Funai

303, 319, 320, 325, 326, 343

305, 307, 308, 309, 313

320, 326, 334

GE

Goldstar

Gradiente

Hitachi

324, 333, 345

306

334

300, 323, 345

Instant Replay 323, 324

Jensen

JVC

Kenwood

LXI

Magnavox

Marantz

Marta

339

310, 311, 334, 339

306, 310, 311, 339

300, 305, 306, 307, 308, 309

323, 324, 331

310, 311, 339

306

Memorex

MGA

Minolta

Mitsubishi

Multitech

NEC

Olympic

Optimus

309, 324

338, 340, 341, 347, 348

300, 345

338, 340, 341, 347, 348

304, 347

310, 311, 334, 339

323, 324

306, 321, 328, 335

Codes for Personal Video Recorders

Brand

Panasonic Replay 100

Philips Tivo 101

Sony Tivo 102

Code

Brand Code

Orion

Panasonic

J.C.Penney

Pentax

Philco

Philips

Pioneer

Proscan

320, 326

321, 322, 323, 324

300, 305, 310, 311, 324,

339, 345

300, 311, 345

320, 323, 324, 326, 331, 343

323, 324, 331

323

300, 301, 302, 323, 324,

331, 333, 345, 346

321, 322, 323, 324

305, 309, 324, 333, 336, 340

300, 301, 302, 323, 324,

Quasar

Radio Shack

RCA

Realistic

Samsung

Sansui

Sanyo

Scott

331, 333, 345, 346

305, 309, 324, 336, 340

302, 304, 333

320, 326, 339, 352

305, 309, 313

301, 302, 304, 309, 320,

326, 338, 340, 347, 348

300, 305, 306, 307, 308 Sears

Sharp

Shintom

335, 336

317

Signature 2000 335

Singer 317

Sony

Sylvania

Tashiro

Tatung

Teac

Technics

Teknika

Toshiba

328, 329, 330

323, 324, 331

306

310, 311, 339

310, 311, 339

321, 322, 323, 324

324

301, 346

Vector Research 311

Wards 306, 309, 335, 336, 344

Yamaha

Zenith

305, 310, 311, 339

306, 344

33

Operating peripheral equipment using the remote control

DV

D

Codes for DVD

Brand

Denon

Ferguson

JVC

Mitsubishi

Nordmende

Panasonic

Philips

Pioneer

RCA

100

101

109

105

101

100

103

102

101

Code Brand

Saba

Samsung

Sharp

Sony

Technics

Thomson

Toshiba

Yamaha

Zenith

101

110

108

104

100

101

103

100

107

Code

DBS/CBL

Codes for Cable Box

Brand Code

ABC

Archer

Cableview

Citizen

Curtis

Diamond

Eagle

Eastern

124

125, 132

105, 132

105, 122

112, 113

124, 125, 132

129

134

GC Brand

Gemini

General

105, 132

122

111, 119, 120, 121, 122,

123,

Instrument/ Jerrold 124, 125, 126, 127

Hamlin 112, 118, 140, 141, 142,

145

Hitachi 103, 124

Macom

Magnavox

Memorex

Movietime

Oak

Panasonic

Philips

Pioneer

Pulsar

103, 104, 105

133

130

105, 132

102, 137, 139

109, 110, 114

106, 107, 128, 129, 130

101, 116

105, 132

Brand Code

Puser

RCA

Realistic

Regal

Regency

Rembrandt

Samsung

132

115

132

112, 118, 140, 141, 142,

145

134

105, 132, 137

105

Scientific Atlanta 111, 112, 113

Slmark 101, 105

Sprucer 105, 110

Stargate

Tel eview

Texscan

Tocom

Toshiba

Unika

Universal

Videoway

Viewstar

Zenith

Zenith /Drae

Satellite

105, 132

101, 105

144

135

104

125, 132

122, 132

106

129, 130

100, 117

100

DBS/CBL

Codes for DBS

Brand Code

Dish Network 105, 115, 116

(Echostar)

Echo Star

Express VU

G.E.

105

105, 115

106

G.I.

(General Instrument)

Gradiente

Hitachi

108

114

103, 111, 112

HNS (Hughes) 103

34

Brand

Magnavox

Panasonic

Philips

Primestar

Proscan

RCA

Sony

Star Choice

Toshiba

Uniden

Code

101, 102

104

101, 102

108

106, 109, 110, 113

106, 109, 110, 113

107

103, 108

100

101, 102

Operating peripheral equipment using the remote control

Mode Operational Key Chart

This chart defines which keys are operational after programming (if needed), while in the selected remote control mode TV, DTV, CABLE, DBS, VCR, DVD ...etc.

KEY NAME

POWER

SAP

MUTE

TV/VIDEO

O K

MENU

RECALL

RETURN

EXIT

GUIDE

TV MODE CABLE MODE DBS MODE

POWER

SAP ON/OFF

MUTE

POWER

-

TV MUTE

POWER

STB AUDIO TRACK

STB MUTE

VCR MODE

POWER

-

TV MUTE

DVD MODE (DVD)

POWER

-

TV MUTE

TV INPUT SW TV INPUT SW TV INPUT SW TV INPUT SW TV INPUT SW

CHANNEL

UP/DOWN

ACTION

CABLE CHANNEL

UP/DOWN

ENTER

STB NAVIGATION

UP/DOWN

STB ACTION

TV CHANNEL

UP/DOWN

TV ACTION

NEXT/PREVIOUS

CHAPTER

NEXT/PREVIOUS

CHAPTER

VOL + / CABLE VOL + / -

STB NAVIGATION

RIGHT/LEFT

TV VOLUME +/- TV VOLUME +/-

MENU STB MENU -

DISPLAY

EXIT

-

-

-

STB EXIT

-

ONSCREEN VCR

DISPLAY

-

-

-

STB GUIDE -

1

4

7 8

0

2

5

R-TUNE

3

6

9

SLEEP

PROG

REW

PLAY

FF

PAUSE

STOP

REC

ASPECT

TV/VCR

VCR/DBS CH

Select Channel Select Channel Select Channel Select Channel -

PREVIOUS CHAN

OR VIDEO MODE

CABLE PREVIOUS STB PREVIOUS

SLEEP -

STB PROGRAM/

DASH

-

-

-

-

-

-

-

-

-

-

-

-

VCR REW/FF

PLAY

PAUSE

STOP

-

-

SKIP SEARCH

<<REW/>>FF

PLAY

PAUSE

STOP

VCR RECORD -

ASPECT

-

-

-

STB ASPECT TV/VCR SWITCH OPEN/CLOSE

PAGE UP/DOWN

VCR CHANNEL

UP/DOWN

SLOW +/-

35

Manuel de instrucciones [Resumen]

Estimado cliente de Panasonic

Bienvenido a la familia de clientes de Panasonic.

Esperamos sinceramente que disfrute durante muchos años de su nuevo televisor

LCD.

Para obtener el máximo beneficio de su aparato, lea estas instrucciones antes de hacer cualquier ajuste, y guárdelas para poder utilizarlas como referencia en el futuro.

Guarde también el recibo de su compra, y anote el número del modelo y el número de serie de su aparato en el espacio provisto en la cubierta posterior de estas instrucciones.

Preparación

Instalación de las pilas en el control remoto

Cambio de las pilas

Cambie las pilas siguiendo los pasos indicados más abajo:

Se necesitan dos pilas AA.

1. Abra la cubierta de las pilas. 2. Instale las pilas como se muestra en el compartimiento de las pilas.

(Las polaridades + y – deber á n coincidir con las marcas correspondientes del compartimiento).

Dos pilas tamaño AA

3. Vuelva a colocar la cubierta.

Precauciones relacionadas con la utilización de las pilas

La instalación incorrecta de las pilas puede causar fugas en las mismas que podrían estropear el transmisor de mando a distancia.

Tome las precauciones siguientes:

1. Utilice siempre pilas nuevas cuando reemplace las viejas.

2. No intente cargar, cortocircuitar, desarmar, calentar o quemar las pilas usadas.

3. Las pilas deberán cambiarse cuando el mando a distancia funcione esporádicamente o no pueda controlar esta unidad.

36

Conexión

Conexión del cable de antena al terminal de entrada de RF

Conexión de antena - Para recibir correctamente los canales de VHF/UHF se requiere una antena externa.

Para obtener la mejor recepción se recomienda utilizar una antena para exteriores.

El modo de antena debe ajustarse a TV.

Antena de VHF

Antena de UHF

HPJ

AUDIO OUT

L

R

INPUT

S-VIDEO S-VIDEO

VIDEO

L

AUDIO

R

VIDEO

L

AUDIO

R

Y

VIDEO

PB

Y

VIDEO

PB

PR PR

L

AUDIO

R

L

AUDIO

R

Mezclador

Terminal de antena

(ANT o VHF/UHF)

ANT

Cable coaxial de 75 ohmios

Clavija de antena coaxial

1

Desmontaje e instalación de la cubierta de la antena

1

INPUT

2

S-VIDEO

S-VIDEO

VIDEO

L

AUDIO

VIDE

L

O

AUDIO

R

COMPON

R

ENT VID

EO

1

INPUT

2

Y

VIDEO

PB

Y

VIDE

O

PB

PR

PR

L

AUDIO

R

L

AUDIO

R

2

Ganchos

1

Desmontaje

1.Empuje los ganchos hacia arriba y tire ligeramente de la cubierta hacia usted mismo para soltar las garras (en 4 puntos).

2.Saque lentamente la cubierta hacia abajo.

2

Instalación

1.Inserte las garras (en 4 puntos) en el extremo de la parte superior.

2.Empuje la cubierta hasta que los ganchos hagan un ruido seco.

Nota:

Para evitar que aparezcan interferencias en la pantalla, no junte el cable de la antena y el cable del adaptador de CA.

Conexión de antena / cable

Cable entrante de 75 ohmios procedente de la antena del hogar/compañía de televisión por cable

Adaptador de antena tipo F (no suministrado)

ANT (VHF/UHF)

en la parte posterior del televisor

Conexión de cable - Para recibir los canales de televisión por cable (01 - 125) conecte el cable suministrado por su compañía de televisión por cable. El modo de antena debe ajustarse a CABLE. (Consulte la sección

Modo de la antena.)

Nota:

Ciertos sistemas de televisión por cable neutralizan algunos canales para reducir interferencias o tienen canales especiales

(codificados). Para recibir correctamente estos canales se necesita un sintonizador de conversión de televisión por cable.

Póngase en contacto con su compañía de televisión por cable para conocer los requerimientos de compatibilidad.

37

Conexión

Para quitar y colocar la cubierta del cable

Para quitarla

1

2

HPJ

AUDIO OUT

L

R

1

INPUT

2

S-VIDEO S-VIDEO

VIDEO

L

AUDIO

VIDEO

L

AUDIO

R R

COMPONENT VIDEO

INPUT

Y

1 2

Y

VIDEO

PB

VIDEO

PB

PR PR

L

AUDIO

R

L

AUDIO

R

1.Suelte los ganchos del extremo más alto.

2.Sáquela lentamente hacia arriba.

Para colocarla

1.Inserte los ganchos (en 2 puntos)

2

HPJ

AUDIO OUT

L

R

1

INPUT

2

S-VIDEO S-VIDEO

VIDEO

L

AUDIO

R

VIDEO

L

AUDIO

R

VIDEO

PB

PR

COMPONENT VIDEO

INPUT

1

Y

2

Y

VIDEO

PB

PR

1

L

AUDIO

R

L

AUDIO

R en el extremo más bajo.

2.Empújela hacia adentro en el extremo más alto.

Nota:

Dependiendo del tipo de cable utilizado, tal vez no sea posible cerrar la cubierta. En tales casos, el cable podrá instalarse a través de la cubierta de la antena.

Como conectar el término del entrada/salida

Reproducción en una videograbadora o en otro equipo periférico

HPJ

AUDIO OUT

L

R

INPUT

S-VIDEO S-VIDEO

VIDEO

L

VIDEO

L

AUDIO

R

AUDIO

R

COMPONENT VIDEO

INPUT

Y

VIDEO

PB

Y

VIDEO

PB

PR

L

PR

L

AUDIO

R

AUDIO

R

L

Audio

IN

R

(Optional)

Estereofónico

HPJ

S-Video

OUT cable S-VIDEO

AUDIO OUT

L

R

VIDEO

Video

OUT

L

Audio

OUT

R

Video grabadora Super-VHS

AUDIO

1

INPUT

2

S-Video

OUT

S-VIDEO S-VIDEO cable S-VIDEO

Video cámara

VIDEO VIDEO

L L

AUDIO AUDIO

R R

COMPONENT VIDEO

INPUT

1 2

Y Y

VIDEO VIDEO

P

B

P

B

P

R

P

R cable VIDEO

Video

OUT

L

Audio

OUT

R

Pr

Pb

JUEGO DE VIDEO

VIDEO

Y

L

AUDIO AUDIO

R

L

R

DVD/STB

L

Audio

OUT

R

AUDIO

Notas:

Cuando se conecten cables de vídeo, y cuando se encuentren hechas conexiones al mismo tiempo al terminal de entrada de S-vídeo y al terminal de entrada de vídeo, se dará prioridad al cable de S-vídeo.

El control de salida de sonido es fijo (SONIDO, AJUSTE, VOLUMEN subir/abajo Y Ambiente conexión/ desconexión son no funciona para el terminal de Audio Out).

38

Conexión/desconexión de la alimentación

Conexión de la clavija a la toma de corriente

2

3

1

Nota:

El televisor y el adaptador de CA consumirán algo de energía siempre que el cable de alimentación esté conectado a la toma de corriente.

Cómo conectar la alimentación

Interruptor POWER principal

Presione el interruptor POWER principal del televisor para encenderlo.

POWER-ON: Verde

Cuando el aparato esté en el modo de alimentación conectada o en espera, pulse el interruptor POWER principal del televisor para apagarlo.

POWER OFF: Apagado

Ejemplo:La pantalla de abajo se visualiza durante un rato después de encenderse el televisor. (La condición de ajuste es un ejemplo.)

ZOOM

Canal 6

ESTEREO

SPA

MONO

SAP

POWER

VCR

DBS/CBL

DV

D

TV

MENU

VOL

CH

O K

VOL

CH

RETURN

EXIT

POWER Pulse el botón POWER del mando a distancia para apagar el televisor: Rojo (espera)

Pulse el botón POWER del mando a distancia para encender el televisor: Verde

Nota:

El cable de la alimentación del televisor deberá enchufarse primero al tomacorriente, y el televisor encenderse luego con el interruptor POWER (modo de espera).

39

Ubicación de los controles

Control remoto iluminado

Botón de la alimentación

Púlselo para encender o apagar el televisor.

Nota: El cable de la alimentación del televisor deberá enchufarse primero al tomacorriente, y el televisor encenderse luego con el interruptor

POWER (modo de espera).

Botones de selección de modo

Selección del modo de videograbadora para el control remoto

Satélite de emisión digital para el control remoto

Selección del modo de televisión por cable para el control remoto

Selección del modo de televisor para el control remoto

Selección del modo de disco de vídeo digital para el control remoto

R-TUNE

Botón R-TUNE

Cambia al canal o modo de vídeo anterior.

Funcionamiento de otro dispositivo

REW FF

Aparato

Videograbadora

CABLE/DBS

DVD

-

REC

Aparato

Videograbadora

CABLE/DBS

DVD

-

-

PLAY

-

ASPECT

TV/VCR

PAUSE

Pausa

-

Pausa

VCR/DBS CH

Subida/bajada de canal para videograbadora

ASPECTO de STB

Abertura/cierre Lentamente/+/--

STOP

Parada

-

Parada

ASPECT

TV/VCR

Botón ASPECT

Cambia el tamaño de la pantalla (consulte la página 20).

JUSTIFICADO ACERCAMIENTO COMPLETO

NORMAL

40

Ubicación de los controles

Botón SAP

Selecciona el modo de audio.

ESTEREO SPA MONO

SAP

POWER

VCR

DBS/CBL

DV

D

TV

CH

O K

VOL VOL

CH

MENU

RETURN

EXIT

TV/VIDEO RECALL MUTE GUIDE

1 2 3

4 5 6

7

R-TUNE

8

0

REW

PLAY

9

SLEEP

PROG

FF

PAUSE STOP

ASPECT

TV/VCR

REC

VCR/DBS CH

T V

Cambia al siguiente canal superior

Mueve el cursor hacia arriba durante el modo del menú.

Reduce el volumen

Mueve el cursor hacia la izquierda durante el modo del menú.

Visualiza el menú

Presione para acceder a los menús DTV, DBS o DVD.

MENU

VOL

CH

O K

CH

VOL

RETURN

EXIT

Aumenta el volumen

Mueve el cursor hacia la derecha durante el modo del menú.

Cambia al siguiente canal inferior

Mueve el cursor hacia abajo durante el modo del menú.

Presione para volver MENU anterior o salir de

MENU.

El modo de entrada cambia cada vez que se presiona este botón.

TV/VIDEO

Presione este botón para silenciar el sonido, y púlselo de nuevo para cancelar el silenciamiento.

RECALL MUTE GUIDE

Botón GUIDE para DBS.

Presione para visualizar la hora, el canal, el cronometrados de apagado y otras opciones.

Botones de selección directa de números de programas

SLEEP

PROG

Botón PROG raya / Botón Temporizador de cancelado

Programa números de canales para DTV y DBS.

Temporizador de cancelado (Minutos)

0

30 60 90

41

Organigrama de menús de televisión

1

Utilizando los botones del menú se pueden hacer todos los ajustes y configuraciones que este aparato es capaz de realizar. La pantalla de menú está compuesta de 2 menús, el menú Ajuste y el menú Configu.

2

Púlselo para visualizar la pantalla MENU, y púlselo de nuevo para cancelarla.

SAP

POWER

Selección de MENÚ

MENU

Ajuste Configu.

Imagen

Ajuste Imagen

MENU

Ajuste Configu.

Imagen

Ajuste Imagen

TV

VCR

DBS/CBL

DV

D

Sonido

Ajuste Sonido o

MENU

Ajuste Configu.

Sonido

Ajuste Sonido

A

O K

RETURN

EXIT

TV/VIDEO RECALL MUTE GUIDE

1 2

4 5

7

R-TUNE

8

0

3

6

9

SLEEP

PROG

MENU

Ajuste Configu.

Imagen

Ajuste Imagen

Sonido

Ajuste Sonido

VOL

CH

O K

VOL

CH

Consulte la ayuda en pantalla

El cuadro de ayuda en pantalla se visualiza siempre que aparece un menú en la pantalla. Este cuadro de ayuda indica qué teclas del mando a distancia se utilizan para desplazarse por el menú mostrado. Consulte más arriba las descripciones de las funciones de los botones.

Cuadro de instrucciones de ayuda en pantalla

Idioma

Idioma

CAMBIE

VUELVE

MENU

Ajuste Configu.

42

Organigrama de menús de televisión

Pulse para seleccionar el MENÚ deseado (Ajuste o Configu).

VOL

CH

O K

VOL

CH

Pulse para seleccionar cada elemento.

Pulse para visualizar cada pantalla de ajuste.

Prosiga con el ajuste.

RETURN

Para volver a la pantalla anterior :

EXIT

MENU

Para finalizar el ajuste :

Pulse para volver.

Pulse para salir de la pantalla MENU.

Esto hace que el aparato vuelva a la condición de visión normal.

Pulse para visualizar cada pantalla de ajuste.

O K

RETURN

EXIT

P u l s e e l b o t ó n

RETURN para volver a la pantalla anterior.

Menú

Ajuste Imagen

Ajuste Imagen

Imagen

Luz de Atras

CONTRASTE

BRILLO

COLOR

TINTE

NITIDEZ

Imagen IA

Normalizar

Normal

+ 20

+ 20

0

- 1

0

0

No Si

(consulte la página 21)

Pulse para visualizar c a d a p a n t a l l a d e ajuste.

O K

VUELVE

Menú Idioma

Idioma

Idioma

Le permite seleccionar el idioma seleccionado en las visualizaciones en pantalla.

Menú

Prog. Canales

Prog. Canales

MODO

TV CABLE

PROGRAMA AUTO

PROGRAMA MANUAL

(consulte la página 18,19)

Menú

Ajuste Sonido

Ajuste Sonido

Normal

Sonido

BAJOS

ALTOS

BALANCE

Dinamico

+ 10

+ 8

0

SON. ENVOL No Si

ESTEREO SPA MONO

Entr. HDMI AUTO

(consulte la página 24)

Pantalla de selección

Bloqueo

Bloqueo

Programas

Activado

Modificar

INGRESAR CLAVE

No Si

RETURN

EXIT

P u l s e e l b o t ó n

RETURN para volver a la pantalla anterior.

Pantalla e ajuste

Subtítulos

Subtitulos

EN MUDO

MODO

Si

No

(consulte la página 28)

Menú

Otro Ajuste

Otro Ajuste

REDUC DE RUIDO

No Si

Filtro 3D

No Si

Matriz Color

SD HD

(consulte la página 30)

(consulte la página 25)

Menú

Ponga Títulos

Ponga Titulos

Componente1

Componente2

Video1

Video2

HDMI

Componente1

Componente2

Video1

Video2

HDMI

(consulte la página 30)

43

Sintonización de canales

(Programación automática de canales)

Explora automáticamente todos los canales de TV y los almacena en la memoria.

1

Conecte la alimentación y pulse el botón TV/VIDEO para visualizar el canal de televisión.

2

Pulse el botón MENU para visualizar la pantalla MENU y seleccione

Configu.

Pulse para seleccionar Prog. Canales.

MENU

Ajuste Configu.

VOL

CH

O K

VOL

CH

Pulse para visualizar la pantalla

Prog. Canales.

3

4

VOL

CH

O K

VOL

CH

VOL

CH

O K

VOL

CH

Pulse para seleccionar MODO.

Pulse para seleccionar TV o CABLE.

Prog. Canales

MODO

TV CABLE

PROGRAMA AUTO

PROGRAMA MANUAL

Pulse para seleccionar PROGRAMA AUTO.

PROGRAMA AUTO

Pulse para visualizar la pantalla de confirmación.

Activar

"PROGRAMA AUTO?"

Si No

5

VOL

CH

O K

VOL

CH

MENU

Pulse para seleccionar Si.

Pulse para seleccionar No.

Pulse para ejecutar PROGRAMA AUTO.

PROGRAMA AUTO

En Programa Auto

Canal

58

MENU

PARAR

Los canales avanzarán automáticamente hasta que todos hayan sido explorados. Los números de canales con una videoseñal se almacenarán en la memoria de exploración de canales.

Pulse para salir de la pantalla MENU.

Esto hace que el aparato vuelva a la condición de visión normal.

Notas:

Cuando se pulsen botones mientras se ejecute PROGRAMA AUTO, el televisor volverá al modo de visión normal. (Los canales encontrados hasta este punto se añadirán.)

Después de terminar PROGRAMA AUTO, se recibirá el canal con el número más bajo que haya sido añadido.

Cuando no haya canales que puedan ser recibidos se visualizará el canal 69 (canal 125 para la televisión por cable).

44

Sintonización de canales

(Programación manual de canales)

Utilice este ajuste cuando cambie ajustes de los canales de recepción o cuando cambie la visualización de los canales.

Encienda el televisor y seleccione el canal de emisión. Siga los pasos de la página anterior para visualizar la pantalla Prog. Canales.

1

VOL

CH

O K

VOL

CH

Pulse para seleccionar PROGRAMA

MANUAL.

Pulse para visualizar la pantalla

PROGRAMA MANUAL.

Prog. Canales

MODO TV CABLE

PROGRAMA AUTO

PROGRAMA MANUAL

PROGRAMA MANUAL

ANULAR

Entre Canal

121

SEL CANAL

VUELVE

Adición o borrado de canales

2

CH

O K

Pulse para seleccionar canal

(o teclas de números).

VOL VOL

CH

PROGRAMA MANUAL

ANULAR Entre Canal

121

SEL CANAL

VUELVE

3

VOL

CH

O K

VOL

CH

Pulse para añadir canales a la memoria

(el número del canal se pone de color azul).

Pulse para borrar canales de la memoria

(el número del canal se pone de color amarillo).

4

Repita los pasos 2 y 3 para continuar añadiendo o borrando canales.

MENU

Pulse para salir de la pantalla MENU.

Esto hace que el aparato vuelva a la condición de visión normal.

45

Troubleshooting

Before requesting service for this LCD TV, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, consult your dealer for instructions.

Symptom

Power supply does not go on

Remote control cannot be operated

Image shakes, or image is unclear

There are spots on the p i c t u r e , o r t h e s c r e e n shakes

The image appears doubled or tripled

A color pattern appears, or colors disappear

T h e c h a n n e l n u m b e r disappears from the screen

Cause and remedy

• Is power supply plug unplugged from the outlet?

• If power will not go on with the remote control, is the power supply of the TV "Off"?

• Is battery exhausted, or is battery polarity wrong?

• Is the remote control receiver illuminated with strong light from a fluorescent lamp etc.?

• Are you using the special-purpose remote control for this equipment? (The unit will not operate with another remote control.)

• Is there deterioration, breakage or disconnection of the antenna or antenna wire?

• Is the antenna wire connected correctly?

• Is the system affected (by radio wave interference or induced electromagnetic waves) by external sources (automobiles or trains, high-voltage wires, neon, motors, magnetized steel frame, or iron rain shutters, etc.)?

Turn off the power supply, and try changing the equipment setup location. If that has no effect, separate magnet-proofing will be required.

• Is the antenna direction shifted?

• Are reflected electromagnetic waves being received from mountains or buildings?

• Is the equipment being affected by another TV (electromagnetic interference)?

Changing the TV setup location may lead to improvement.

• Has the RECALL button been pressed?

Press the "RECALL button" again.

If the system is switched to external input and there is no external signal video, the number will disappear.

• This occurs when the signal driving the liquid crystal is lost, and is not a malfunction.

page

12

7

8, 9

15

H

D

M

I

When the image is not stable, the screen turns completely white for a moment

The screen goes dark momentarily when the channel is changed.

The TV makes a hissing noise occasionally

The screen display shakes with video input

A b l a c k b a n d a p p e a r s momentarily when selecting channels with video

Both edges of the screen, or columns or window frames, appear bent

The image from the connected equipment does not appear

The main unit is hot to the touch

• The screen is darkened for a moment to conceal noise generated when changing channels.

• If the screen and audio are not abnormal, this sound is caused by slight expansion and contraction of the cabinet due to changes in room temperature.

It has no effect on performance.

• When input is switched to "video input", this may occur if there is no signal at the video/audio input terminal.

• This is due to noise generated when changing channels.

10, 11

• They may appear bent due to the received channel or some DVD software.

This is not a malfunction.

Poor Video

(Example: Snow noise, no picture, picture runs, etc.)

Poor Audio

•Are plugs securely inserted into each terminal?

Securely insert plugs all the way.

• The main unit radiates heat, so some parts of the console reach a high temperature. This is not a problem for performance or quality.

• Set up at a location with good ventilation.

Do not cover the ventilation holes of the console with a tablecloth, etc., and do not place on top of other equipment (like a video deck).

• Check HDMI cable is connected securely.

• Turn the power supply of the TV set and connected equipment ON/OFF.

• Check compatibility of connected signal. Change settings of connected equipment to make signal compatible.

• Is the input source from the equipment that is EIA/CEA-861/861B compliant consumer electric device?

• Set audio of connected equipment to L.PCM.

• Check setting of HDMI INPUT under AUDIO ADJUST.

• If the problem with the digital audio connection persists, change to an analog audio connection.

10,11

12

24

46

Specifications

Power Source

Power Consumption

LCD

AC 120 V, 60 Hz

Average use : 92W

Stand-by condition : 1.3 W

TV set DC 15 V, 1.6 A max.

559 mm (22-inch), 16 : 9 aspect ratio LCD panel

487.7 mm (19.20

) (W)

×

274.3 mm (10.80

)

×

559.5 mm (22.03

) (DIAGONAL)

VHF-12 : UHF-56 : Cable-125

Screen Size

Channel Capability

Sound

Speakers

Full-range

Woofer

Headphones

FEATURES

Operating Conditions

Connection Terminals

3W + 3W + 5W (10 % THD)

4 cm, 2 pcs

5 cm, 2 pcs

M3 (3.5 mm) Jack

×

1

CLOSED CAPTION

V-Chip

Temperature : 41

°

F - 95

°

F (5

°

C – 35

°

C)

Humidity : 5 % - 90 % RH (non-condensing)

INPUT

COMPONENT

VIDEO INPUT

OUTPUT

HDMI

Dimensions ( W

×××××

H

×××××

D )

Including TV Stand

TV Set Only

Mass (Weight)

VIDEO (RCA PIN Type

×

1)

×

2

S-VIDEO (MINI DIN 4pin

×

1)

×

2

1.0 Vp-p (75

Ω)

Y : 1 Vp-p (75

Ω),

C : 0.286 Vp-p (75

Ω)

AUDIO L-R (RCA PIN Type

×

2)

×

2

Y

×

2

P

B

/ P

R

×

2

0.5 Vrms

1.0 Vp-p (including synchronization)

±

0.35 Vp-p

AUDIO L-R (RCA PIN Type

×

2)

×

2 0.5 Vrms

AUDIO L-R (RCA PIN Type

×

2)

×

1 0.5 Vrms

AUDIO L-R (RCA PIN Type

×

2)

×

1 HDMI TYPE A Connector

×

1

586 mm (23.07

″) ×

427.5 mm (16.83

)

×

255 mm (10.04

)

586 mm (23.07

″) ×

387.2 mm (15.25

)

×

91.3 (3.59

mm)

9.5 kg (20.9 lb.) NET

Note:

Design and Specifications are subject to change without notice. Weight and Dimensions shown are approximate.

47

Customer’ Record

The model number and serial number of this product can be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.

Model Number Serial Number

Panasonic Consumer Electronics

Company, Division of Matsushita

Electric Corporation of America

One Panasonic Way Secaucus

New Jersey 07094

Panasonic Sales Company,

Division of Matsushita Electric of Puerto Rico Inc. (“PSC”)

Ave. 65 de Infanteria, Km 9.5

San Gabriel Industrial Park,

Carolina, Puerto Rico 00985

Panasonic Canada Inc.

5770 Ambler Drive

Mississauga, Ontario

L4W 2T3

Matsushita Electric Industrial Co., Ltd.

Printed in Japan

MBS0703S0

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Table of contents

Languages