Panasonic PV-C1321 13 in. TV/VCR Combo

Panasonic PV-C1321 13 in. TV/VCR Combo
 Panasonic
Combination VCR
Operating Instructions
Omniviolon WS Models No. PV-C1321 / PV-C1331W
PV-C1341 / PV-C1351W
pp ce $,
mE
+ SELF-DEMO Procedure is on page 4. |
A As an ENERG r STAR" Partio
” AS Matsushia Electrc Comorátorn
e 7 Of Amorica has determuned thal
DA his product or produci modes
———— ts the ENERGY STAR
Dura 100 SOOTY CIO y
Flease read these instructions carefully before attempting to connect
operate, or adjust this product. Please save this manual
Spanish Quick Use Guide is included
(Guía para rapida consulta en español está incluida.) LSOTO344A
For assistance. please call - 1-800-211-PANA(7262) or send e-mail lo : consumerproducts E panasonic com
Pe eje): - das II
uonjeJadn AL
UOBUWUOJU| JNO A JO |UORERO0 paoueApy UDI) Jun]
‘Important Safeguards and Precautions *
READ AND RETAIN ALL SAFETY AND
OPERATING INSTRUCTIONS. HEED ALL
WARNINGS IN THE MANUAL AND ON UNIT
INSTALLATION
1 POWER SOURCE CAUTION
Cperate only from power source indicated ón unit
or in this manual. if uncertain, have your Electric
Utility Service Company or Video Products Dealer
vetify your home power source,
2 POWER CORD PLUG
For safety, this unit has a polarized type plug (one
wide blade}, or a three-wire grounding type plug.
Ahways hold the plug firmly and make sure your
hands are dry when plugging in ar unplugging the
AC power cord. Regularly remove dust, dirt, etc.
on the plug. :
LARIZED PLUG € ION:
The plug fits into outlet aña way. If it cannot be fully
inserted, try reversing it. Jf it still will not fit, have an
electrician install the proper wall outlet. De not
tamper with the plug.
BOUNDING PL THON:
The plug requires a three-hole grounding outlet.
If necessary, have an electrician install the proper
outlet, Do not tamper with the plug.
3 POWER CORD
To avoid unit malfunction, and to protect against
electrical shock, fire or. personal injury;
« Keep power cord away from heating appliances
and walking traffic. Do not rest heavy objects on,
or roll such objects over the power cord.
- Do not tamper with the cord in any way.
- An extensión cord should have the same type
plug (polarized or grounding) and must be
securely connected.
~ Overloaded wall outlets or extension cords is a
fire hazard. ;
- Frayed cords, damaged plugs, and damaged or
cracked wig insulation are hazardous and should
be replaced by & qualified electrician.
4 DO NOT BLOCK VENTILATION HOLES
Ventilation openings in the cabinet release heat
generated duririg operation. if blocked, heat
uild-up may result in a fire hazard or heat
damage to cassettes,
For your protection:
a. Never caver ventilation siots while unit is ON,
or operate unit while placed on a bed, sofa,
rug, of other soft surface.
b. Avoid built-in installation, such as a book cass
of rack, unless property ventilated,
5 AVOID EXTREMELY HOT LOCATIONS OR
SUDDEN TEMPERATURE CHANGES
Do nôt place unit over or Near a heater or
regutator, in direct sunlight, ete. If unit is suddenty
moved from & cold place to a warm place,
moisture may condense in unit and on the tape
causing damage.
6 TO AVOID PERSONAL INJURY
+ Never place unit on support or stand that is not
firm, level, ang adequately strong.
The unit could fall causing serious
injury to a child or adult and
damage to the unit,
+ Move any appliance and cart
combination with care.
Quick stops, excessive force, and
uneven surfaces may cause objects to overtum.
» Carefully follow all operating instructions.
2.
[OUTDOOR ANTENNA INSTALLATION
1 SAFE ANTENNA AND CABLE CONNECTION
An outside antenna or cable system must be property
grounded fo provide some protection x
against built up static charges’ ЧН
and voltage. Section 810
of the National Electrical Se
Coda, ANSINFPA 70 (in mao
Canada, part 1 of the aa
Canadian Electrica! Code} , pasate reia grama
provides informatión mm aia wm BR
regarding proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna
discharge unit, size of giounding conductors, location of
antenna discharge unit, connection to grounding
electrodas, and requirements for the grounding electrode.
2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE
POWER LINES OR CIRCUITS
Locate an outside antenna system well away from power
lines and electric fight or power circuits so it will never
touch these power sources should it ever fall. When
installing antenna, absolutely never touch power lines,
circuits or other power sources as this could be fatal.
| USING THE UNIT |
Before unit is brought out of storage or moved to a new location,
refer agin to the INSTALL ATION section of these safeguards.
1 KEEP UNIT WELL AWAY FROM WATER OR
MOISTURE, such as vases, sinks, tubs, etc.
2 IF EXPOSED TO RAIN, MOISTURE, OR
STRONG IMPACT, unplug unit and have it inspected
by a qualified service technivian before use.
LECTRICAL STORMS --
During a lightning storm, or before laaving unit unused for
extended periods of time, disconnect all equipment from
the power source as welt as the antenria and cable system.
4 WHEN UNIT IS PLUGGED IN
* DO NOT OPERATE IF: -
- liquid has spilled into unit. —.
- Unit was dropped or otherwise damaged.
= Unit emits smoke, malodors, or noises,
Immediately unplug unit, and have if inspected by a
sevice an Ta and shock hazards .
* Never or any ugh openings in un
Touching nora) may cause electric shock or fire hazard,
= Keap magnetic objects, such as speakers, away from
unit to avoid electrical interterence.
5 USING ACCESSORIES
Use only accessories recommended by tha manufacturer
to avoid risk of fire, shock, or other hazards.
6 CLEANING UNIT
Unplug unit. Usa a clean, dry, chemically untreated doth to
gently remove dust or debris. DO NOT USE cleaning fluids,
gerosuls, or forced air that could over-spray, or see into unit and
cause electrical shock. Any substance, such as wax, adhesive
tape, etc. may mar the cabinet surface, Exposure to greasy,
hurnid, or dusty areas may adversely affect internal parts,
| SERVICE _ |
1 DO NOT SERVICE PRODUCT YOURSELF
If, after carefully following detailed operating instructions, the
unit does not operate properly, do not attempt to open or
remove covers, br make any adjustments not described in the
manual. Unplug unit and contact a qualified service technician.
2 REPLACEMENT OF PARTS
Make sure the service technician uses only parts specified
by the manufacturer, or have equal safety characteristics
as original parts. The use of unauthorized substitutes may
result in fire, electric shock, or other hazards,
3 SAFETY CHECK AFTER SERVICING
After unit is serviced or repaired, request that a through safety
check be done as described in the manufacturers service
literature to insure video unit is in safe operating condition, J
3
Safety Precautions/Mesures de sécurité
Warning : To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
Caution : To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Avertissement : Afin de prévenir tout risque d’incendie ou de chocs électriques, ne pas
exposer cet appareil a la pluie ou a une humidité excessive.
Attention : Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans
la borne correspondante de la prise et pousser jusqu'au fond.
This video recorder, equipped with the HQ (High Quality) System, is compatible with
existing VHS equipment.
Only use those tapes with the mark. It is recommended that only cassette tapes that
have been tested and inspected for use in 2, 4, 6, and 8 hour VCR machines be used.
This television receiver provides display of television closed captioning in accordance with
815.119 of the FCC rules.
FCC WARNING : Any unauthorized changes or modifications to this equipment
would void the user's authority to operate.
This symbol wams the user that uninsulated
voltage within the unit may have sufficient
A E /N magnitude to cause electric shock.
CO NOT OPER ® Therefore, it is dangerous to make any kind
CAUTION: TO REDUCE THE RISK of contact with any inside part of this unit.
OF ELECTRO VER (OR BACIO This symbol alerts the user that important
literature concerning the operation and
NO USER-SERVICEABLE BARTS maintenance of this unit has been included.
REFER SERVICING T . :
QUALIFIER SERVICE PERSONNEL Therefore, it should be read carefully in order
to avoid any problems.
o —-D
Before Using
Congratulations ] Loading the Batteries __
on your purchase of one of the most
sophisticated and reliable products on the market
today. Used properly, it will bring you and your
family years of enjoyment. Please fill in the
information below. The serial number is on the
tag located on the back of your unit.
( Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Mode! No.
Serial No.
\.
1) Open the cover.
~
A
( a
Accessories
[J Remote Control
LSSQ0281
(PV-C1321/PV-C1341)
LSSQ0282
(PV-C1331W/PV-C1351W)
3) Close the cover.
(O Battery replacement caution
QJ) * Do not mix old and new batteries.
* Do not mix alkaline with manganese batteries.
Li Batteries
2 AA EM Prevent Accidental Tape Erasure
Break off the tab to protect.
To order accessories,
q call toll free 1-800-332-5368. ZZ
SELF-DEMO Mode Ще A >>>
With Power ON, press Screw driver
PLAY/REPEAT on the To record again.
unit for 7 seconds to
deactivate the SELF-
DEMO Mode.
Repeat this to display Cover the hole
demo screen. with cellophane tape.
4 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts E panasonic.com
SS
Л
Table of Contents
Important Safeguards and Precautions / Safety Precautions
Before USING nacen nera rene nancanenaneree ren tanennanananeneo.. =]
Table of Contents ..............e..e=cecancine nn encerio nene nen rene 5 Ey
Location of Controls ...................e..eeee.e.... eacmne mas neenarmemenenenenenane=teannes я
Initial Setup for ANT. / Cable Connection ................=.=e=.2eeorennennzenenas =
Initial Setup for DSS / Cable box Connection .............—r====e=esuxnevoos <
Reset Language, Channels, Clock, Time Zone Adjust................... 5
Playback à [email protected] .……..........….…ccrsvsenseressnenannnnnement=n ansenanssenessencacnennencensenes o
Record Ona Tape ............ee=1eeeesenioncenonaenonrenonana reee ee ceenn DDD ®
Copy Your Tapes (Dubbing) ................-.-we.esne=eereereneecaneoa nene. =
|
TV OPEFATION .………...…..….…cnemsesmercesesentenseneneentennnnnsentanmenaenensen seen us В
Closed Caption System ..............=cemenurroacenacanacuanveronananenmenneneaaracannenes <
TV Timer Features ................emenonnaoorvvacannanaaone vence nannaneare nene sa snsns EE ©
Picture Adjustment ..........—— meme. ene ens я
FM FACIO ….…..…….….….….…ec-soasersemmenssracsenmaensenentansensentansannsencrnsenennnnenen sense 5
|
=
Timer Recording........ccucvevsscmmmmuneusmmmnereusinecinananmenennesssansennsasensesensansas =
3
К
A
5
. I»
Tape Operation ......cuccvcevrninemunssesssmmesmasmenenmmmesssansesmseseasesnanaannnnsens a
Special VCR FEatUresS ..…………meumseenensnnmnnnnnnnnnnnnnnnnnmnnnnnnünnünnnünnnes 3
V-Chip Control Feature ..............—e—...=—-====esvecvcecenannen rene nnananonoancanoneeanana 5
E
M
=
=
On-Screen Display (OSD) ................rreseerecccnenmnennorrontenenenaanenonennanarenne y
Warning and Instruction Displays ............—..c.e--=reresevenconoonononeroocucaaos <
Unit Information .............-.= w=-==..eresenceneneno ree enananannennerenecennenenEonemereae -
Before Requesting Service ..................an.navnesvesanacvennerenoeenauaaamanen enanos =
Service Center List ..............-.e-m=esuss0s0asnnenannerar eee cacnananen nas ennaananannenTe. 5
Spanish Quick Use Guide / Guía para rápida consulta.................. =.
Limited Warranty .........e......-e==sconoanesanonoconenanocane non env entanena nero reanaenanona =
=
Location of Controls
Remote Control Buttons
EJECT button:
When EJECT is pressed, the tape is ejected from Cassette Compartment.
If EJECT is pressed during recording, the unit will not respond to the command.
EJECT NITE
Page 6 Page 16
POWER
Page 8
SLEEP
DISPLAY Page 19
Page 35 TRACKING U PDOWN
TAPE POSITION age
Page 25 —
COUNTER RESET NUMBERED Keys
Page 26 Page 16
RAPID TUNE
Page 16. ADD age 13
MUTE
A
Pere
CHANNEL UPMOWN Page16 VOLUME UP/DOWN Page 16
SELECT UPDOWN Page 13 SET/BACKSPACE Page 13
ACTION —
Page 12 PROGRAM
STOP Page 22
Page 14
FAST FORWARD/SEARCH
Page 14
REWIND/SEARCH PLAY
Page 14 Page 14
REC A CM/ZERO
Page 14 Page 26
PAUSE/SLOW SPEED
Page 14 Page 14
FM/TV
Page 21
For assistance. please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts E panasonic.com
Front View of the unit and Indicators on the Front Panel
=]
=
v
— — —
(0
REWIND/SEARCH Page 14 _ | Cassette Compartment
ACTION Page 13 NN / Page 14 D
ou
STOP/EJECT Page 14 _| PLAY/REPEAT <
ACTION Page 13 EN / Page 14
CHANNEL UP/DOWN Page 16 _|| || _FAST FORWARD/SEARCH
TRACKING UP/DOWN Page 37 NN a Page 14
SELECT UP/DOWN Page 13 REC
VOLUME UP/DOWN Page 16 _| / || - Page 14
SET/BACKSPACE Page 13 NL TIMER/FM
POWER À VA Pages 19, 21
Page 8 \ \\\ LAS
Audio/Video In Jack Bullt-in Speaker
Page 15 Phones Jack
age
REC Indicator fo | PROGTIMER Indicator
Lights when the unit is set for Timer
Recording. It flashes whan a Timer
Recording has been set with no tape
inserted, the clock is not set, or the
tape is in motion.
Page 22
ON TIMER Indicator
Lights when the
On Timer is set.
Page 18
Lights during recording.
In Rec Pause or OTR
Pause mode, the
t indicator flashes.
Page 14
Remote Sensor
Rear View of the unit
Easy-Grip-Handle
Use when transporting
the unit.
й CRE romano
=
0100000000000
A
000000/00000009000
00000900000000008/09 00
00000000000000000; 0008000
AC Power Plug
When plugged into TY
an AC outlet, the
unit consumes
4.0 W of electric
\ |
power in OFF N ©
condition.
0006000000000000000| o>
(=) 00000000000000000 00 po
009G0000002000000000/0 00
5000090 00
0 E
00000090 0600000 000009090900
000C0G00{000220/0000000000
0000000
0000000
0000000
0000000
VHF/UHF Antenna
Input Terminal
In from your
y Antenna
or Cable.
Pages 8, 10
(0092900000 |
©
GP
Initial Setup for ANT. / Cable Connection
M Connect the Cable from Antenna/ Cable to the VHF/UHF
terminal on unit.
WARNING:
When using “Nut type™ RF coaxial cables, tighten with
fingers only. Overtightening may damage terminals.
VHF/UHF
How to do initial Setup
1 Press POWER on the OR
3 Press CH A to select English.
Press CH YV to select Spanish
remote or unit. (Español).
2 When the unit is turns on the (rrancals). + to select French
first time, SELECT ;
LANGUAGE screen appears. CHANNEL/CLOCK AUTO SET
screen appears.
* lt wrong language is set, complete “Reset .
all unit Memory Functions” steps page 9.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts € panasonic.com
Press CH A Key to start
CHANNEL / CLOCK AUTO SET
operation. Settings are performed
, automatically. If the setup is
completed, the following screen is
displayed.
=]
=
o
N
D
Lama
=
Le
IF AUTO CLOCK SET IS
INCOMPLETE screen appears, set SET
the clock using MANUAL CLOCK A:CH UP
SET procedure as below. У:СН DOWN
— = » VOL UP
e Е «VOL DOWN
| So N adil E
rr
Ш
MANUAL CLOCK SET
If AUTO CLOCK SET was incomplete,
manually set the clock as follows.
Press ACTION Key on the Remote
to display SET CLOCK Menu screen.
Reset all unit Memory Functions
When moving unit to a new location, or if a
mistake was made in the Initial Setup
section.
* Make sure a tape is not inserted in the unit. ,
Tose СНЕС) за
\ oo\ "CN
LI
Press À Y to select the month and - i
press P to set. In the same manner, |
select and set the date, year, time,
and DST. (Daylight Saving Time) 1 Turn the unit
Power on.
2 Press and hold both PLAY and
FF on the unit for more than 5
seconds.
* The power will shut off.
* Please ignore NO CASSETTE
Press ACTION Key twice to start warning.
CLOCK and exit. 3 Do “Initial Setup” on page 8.
9
Initial Setup for DSS / Cable box Connection
How to Connect
HB Connect the OUT Jack on your cable box to the VHF/UHF
terminal on unit with an RF cable.
WARNING:
When using “Nut type” RF coaxial cables, tighten with
fingers only. Overtightening may damage terminals.
Cable TV
Converter Box
= | es
IN from
CABLE
VHF/UHF
How to do Initial Setup 3 Press CH À to select English.
OR
1 Press POWER on the Press CH Y to select Spanish
remote or unit. (Español).
Press VOL + to select French
When the unit IS turns on the (Francais).
first time, SELECT CHANNEL/CLOCK AUTO SET
LANGUAGE screen appears. screen appears.
ha Eo rt
o
OBRIMIRICHEVE
у von JQP,
* Turn on your cable box and set it to
PBS(Public Broadcast Station) channel
in your time zone. If you use DSS
recelver, It must be turned off.
10
For assistance. please call : 1-800-211-PANA{7262} or send e-mail to : consumerproducts @panasonic.com
* [f wrong language is set,
complete “Reset all unit Memory
Functions” steps page 9.
Press CH A Key to start
CHANNEL / CLOCK AUTO SET
operation. Settings are performed
automatically. If the setup is
completed, the following screen is
displayed.
If AUTO CLOCK SET IS
INCOMPLETE screen appears, set
the clock using MANUAL CLOCK
СОК)
00!
SET procedure on page 9. Do
So
O
a
Cala SELECT/
SET
o a:CH UP
v:CH DOWN
).VOL UP
4:YOL DOWN
Note to CABLE System Installer
This reminder is provided to call the CABLE (Cable TV) System Installers attention to
Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
Un
Reset Language, Channels, Clock,
Press ACTION
to display MAIN MENU.
Ш Language Æ Channels Hl Clock
1) Press AV to 1) Press AV <P to 1) Press AY<> to
select language select “CH.” select “CLOCK.”
icon. air vain
me oN
62 Ба 0 ol) =
2) Press ACTION.
2) Press ACTION | SE
repeatediy. RFA UTOICLOCKÉSETZ
ELEGIAZa41Æ 415
Ral UARRE ACTION
For English
3) Press AV <P to
select “EXIT.”
Press ACTION to
exit.
12
3) Press AV 10 select
“ANTENNA,” then
press p> to set your
antenna system
( TV” or “CABLE”).
4) Press AY to select
“AUTO SET,” then
press ».
+ After Channel Auto Set
is finished, Clock Auto
Set will be performed.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts E panasonic.com
|
1! MESZONEFADJUSTI 0)
|
(“TIME ZONE ADJUST"
appears only when
auto clock is set.)
3) Press AY to select
“MANUAL” or
“AUTO CLOCK
SET” and press p.
* For Auto Clock Set,
select “AUTO CLOCK
EEA er me Me re bar a ar
SELECT MONTH
4)Press AV and
press «> to
select and set the
month, date, year,
time, and DST
(Daylight Saving
Time).
5) Press ACTION
twice to start the
clock and exit this
mode.
Time Zone Adjust
Hl Time Zone Adjust
{Only when Auto Clock is set.)
1) Press AY-<U> to
select “CLOCK.”
_ ACTION key on
the unit
BTOPEJECT REWES
ce
3) Press AV 10 select
TIME ZONE On Unit
Ae and You can operate the
press 4 or» to menu screen usin
subtract or add unit buttons, 9
hour(s) as To display the menu,
press STOP/EJECT
necessary.
me У vo and REW together
with no tape inserted.
To exit the menu,
repeat above with or
without tape inserted
until normal screen
appears.
~— Using AVA) keys ——
or || SET
= © Ql acHup
SOON :cH Dow
5 DO »:voLUP
O O 4:vOL DOWN
0000
On Unit
Co
On Remote
À : CHUP
V : CH DOWN
» : VOLUME UP
< : VOLUME DOWN
Whenever the menu or program
screen is displayed, CHANNEL
UP/DOWN function as AY and
VOLUME UP/DOWN function as
«<p only.
-
La À
| Add or Delete a Channel
twice to exit. To add channel: To delete channel:
* TIME ZONE Select channel with Select channel with CH
ADJUST returns to number keys and AY or number keys and
“O” if clock is set press ADD/DLT. press ADD/DLT.
manually. : = Te
Playback a Tape
SM Ready Check List
O All connections are made.
Cl Your unit is plugged in.
Insert a cassette.
* The unit power comes
on automatically.
To prevent tape jam,
remove loose or peeling labels
from tapes.
2 Press PLAY.
+ Playback begins if cassette has no
record tab.
Ш Forward/Reverse scene search
-> Press FF or REW
> Press again or PLAY to release.
E Still (Freeze) picture
> Press PAUSE/SLOW
> Press PLAY to release.
E Siow Motion picture
> Hold down PAUSE/SLOW in
Still mode
> Press PLAY to release.
M Frame by Frame picture
> Press PAUSE/SLOW in Still mode
3 Press PLAY to release.
Notes
* These features work best in SP or SLP mode
(models PV-C1341/PV-C1351W) and SLP mode
(models PV-C1321/PV-C1331W).
* Alter the unit is in Still or Slow mode for 3
minutes, it will switch to Stop mode automatically
to protect the tape and the video head.
E Stop > Press STOP
E Rewind tape > Press REW in Stop mode
E Fast forward tape > Press FF in Stop mode
E Eject tape > Press EJECT on the remote
or STOP/EJECT on the unit
Ty
-
You can operate on the unit
CH AV
Insert a REC
№ Press to stop and/or REC Indicator
\__eiect tape.
14
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts @ panasonic.com
Record On a Tape
insert a cassette with record tab.
* The unit power comes on automatically.
Press CH AV or number keys to
Select Channel.
* For “LINE” input, see bottom of next page.
Press SPEED to select recording
speed (see page 37).
SP = Standard Play
LP = Long Play
SLP = Super Long Play
* Selected speed is displayed.
A Press REC to start recording.
* То edit out unwanted portions, press
PAUSE/SLOW to pauss and resume
recording.
* You cannot view another channel during
recording,
EH Stop > Press STOP
EH One Touch Recording (OTR)
Press REC repeatedly homatRec_e020-—100
Cora sore 20000)
to set the recording
length (30 min - 4 hours.)
* The unit stops recording at a preset time.
* PROG TIMER indicator lights on the unit.
* Áfter the unit has been in Rec Pause mode for 5
minutes, it will stop automatically to protect the
tape and the video head.
* The remaining recording time of an OTR can be
displayed by pressing DISPLAY.
EJECT
ООО
DISPLAY o OO TRACKING
O Doc
NUMBER HS =
Keys 1O ojo ©
O © O C-H-ADDDLT
O O | SELECT/
£ O SET
PLAY —° Ca ED weil a:CHUP
NN || Y:CH DOWN
ACTION 7 O1) r:voLUP
STOP el = Ib 4 VOL DOWN
REC— OL Fr
REW O GH—SPÉE
PAUSE 7
/SLOW Ds]
| |
Copy Your Tapes (Dubbing)
Connections you’ll need to make.
Playing (Source) VCR
AUDIO VIDEO
© IN FROM ANT.
© OUT TO TV
Recording (Editing) unit
VIDEOINBFÄAUDIOIN
e
Playback (Source) Recording (Editing) unit
Insert pre-
recorded tape.
==
Insert blank tape
with record tab.
* Dubbing tapes protected
with Copy Guard will have
poor quality results.
WN —
PAUSE
[+]
Press PLAY then
PAUSE at starting
point to put in
Standby mode.
(Perform operation of steps 4 and 5 on both units at same time.)
REC
©
Select “LINE” mode.
See “Selecting Input Mode” below.
Press REC, then
PAUSE/SLOW
immediately to put in
Standby mode.
* Unauthorized exchanging
and/or copying of copyrighted
recordings may be copyright
infringement.
Method 2:
a Press ACTION for MAIN MENU.
b Press AY UP to select “TV”, then press ACTION
tor SET UP TY screen.
c Press AY to select “INPUT SELECT,” and
then press P to select TUNER” or “LINE”
d Press ACTION twice to exit this mode.
Press PLAY PAUSESLON Press PAUSE/SLOW
to start dubbing. to start dubbing.
Press STOP stop Press STOP
to stop dubbing. (*) to stop dubbing.
Selecting Input Mode
Method 1:
Press CH AY. The display will change as follows.
1-2 +=» 3
(CABLE) (TV)
LINE #—-+125 or 69
o»)
0
us
о
O
К
2
=
3
TV Operation
1 Press POWER on the remote or Y Ready Check List
unit. [J All connections are made.
[J Your unit is plugged in.
Use CH AY or
2 number keys to
select a channel.
(— — —
Г =
| Press VOL + or VOL -
; to adjust volume. VOL + / VOL -
PLAY/
REPEAT
NIGHT (NITE) Mode
Color and picture intensity levels are adjusted so the
screen is easier on your eyes during night time use. CH AY
Press NITE to set NIGHT
mode. POWER
* NIGHT mode may be selected
when watching TV, playing a
tape, or while in FM mode.
Press NITE to cancel.
* Previous settings are restored.
* NIGHT mode is canceled PWERT5 O ОО
when power is tumed off or 500 Oj
fail . _—
power failure occurs 100 KEY 00
RAPID NODO
TUNE 0
7 PAG
E Using the 100 key мо! | e
When selecting CABLE channels 100 to 125 UP/DOWN =
with the number keys, first press the 100 ACTION © ©
key, and then enter the remaining two digits. EEO
E Rapid Tune DO
Press R-TUNE to display the last channel you So
were watching.
E Audio Mute
Press MUTE to instantly mute the sound. Press
again to restore the previous sound level.
MW Phones
Connect an earphone (not supplied) or
headphones (not supplied) to the Phones Jack.
16
For assistance. please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts @panasonic.com
NITE
NUMBER
Kays
CH
UP/DOWN
Closed Caption System
Closed Caption is ...
This multi-use system not only allows the hearing
Caption On Mute Feature
impaired to enjoy selected programs, but also Closed Caption narration, if available, is displayed
makes useful information from TV stations when MUTE button is pressed for silence.
available to everyone. Press ACTION
Closed Caption Mode Feature to display MAIN а Pr So
ORAN MENU RARES 1) Press
to display MAIN MENU 2 о >} lo select TV.
o spy A 2) Press ACTION
ET en) 1) Press AY > to display SET
ali ta <>; to select TV.” UP TV screen.
SD = 2)Press ACTION
ea E Cosplay SET 3 CAKE UA 1) Press AV to
screen. MOR Pee | Select “CAPTION”,
peus que 2) Press > to
FE 1) Press AV to display CAPTION
gait select “CAPTION”. SY screen.
aa 2) Press ) to =
display CAPTION CEE) 1)Press AV to e,
screen. al select CAPTION oO
7 EE EARS, TA:
НЕ 1) Press AY to : EL rencalo io 5
e select CAPTION : : select “OFF” =
es ERA CarTION moDevacori,| select CC ON
Zoo Men: repeatedly to EA. MUTE
EEE select mode. TO ау
ITE (See left.) E 2) Press »
TEXT C2 TEXT Cl : repeatedly to select
KE cap 94 oras desired mode.
+ Each press of > will
Press ACTION three times NO» CAP Cl change the display as
to retum to the normal screen ) shown at left. -
« The caption may be
CAP C2 broadcast over CAP
Recording and Playing Back à Closed Y C1 or Ca.
Caption/Text Program Press ACTION three times
Record : Record normally. Closed Caption/ to return to the normal screen.
Text signal, if present, is recorded
automatically. Press MUTE to mute the sound and
Playback : Start playback. Do above steps to display closed captioning.
select desired caption mode.
Closed Caption Mode Selections
Caption Mode: CAP C1 or C2
A narration of selected TV programs is displayed.
Check TV program listings for CC{Closed Caption) broadcasts.
Caption Mode: TEXT C1 or C2
The lower half of the screen will be blocked out. When the TV station broadcasts information,
such as program listings, it will appear in this space.
Caption Mode: OFF
Closed Caption /Text narration will not be displayed.
NOTE : The closed caption or text signal may be broadcast over C1, C2, or both.
Also, text contents can vary so you may wish to try different settings.
J * TO cancel, press MUTE again.
r
r
TV Timer Features
ON-TIMER with Alarm
This unit can be set to automatically power on in one
of 3 modes (TV, Playback, or FM radio.) ,
You can also combine the On-Timer with a one
minute alarm that gradually increases in volume.
Press PROG
to display SET PROGRAM screen.
1)Press AY to select
— AECE “ON TIMER”
carmen E 2) Press » to display
ON TIMER screen.
1) Press AY to select
| desired settings.
2) Press > to set the
ON-TIMER TIME or
ON-TIMER mode.
* Make sure a tape is
inserted if Playback mode
is selected.
+ See “FM Radio” on page
PLAY 21 for instructions on
how to preset FM
stations.
* ON-TIMER mode
selection order
(*CHOZ—CHO + CH125m
CHo1
LL FM9 —FMB-«»FM1
- En Press AY to select
В я ALARM “ON” or “OFF.”
When “ON” is selected,
an alarm will gradually | increase in volume for one
minute or untii canceled by pressing any button
{including VOL + -).
To Make Corrections,
use AV and <i> to move back and correct.
Press PROG
to set ON TIMER.
* “ON TIMER lindicator lights on the unit.
To Cancel ON-TIMER set,
Repeat steps 1 and 2. Then, press ADD/DLT to clear
the time in step 3. Now, press PROG to end.
“ON TIMER END” briefly appears on-screen.
18
For assistance. please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts € panasonic.com
м Ready Check List
[J The clock is set to correct time.
CH AV
ON TIMER
Indicator
CD
If no button on the remote or unit
(including a button used to turn off
the alarm) is pressed within 60
minutes after unit turns itself on, it
wilt turn itself back off.
SELECT/SET
4:CH UP
v:CH DOWN
>: VOL UP
4:VOL DOWN
ROG
: 1:00 (one minute) ---;
I :
2:00 inut
3:00 increase
: until 10:00
: 9:00
= 10:00 TI
| 1599 fve-minute
: 20:00 increase
no ntil 30:
ı 25:00 v 00
В 30:00 Toner
| 40:00 ten-minute
| increase
: 50:00 until 60:00
E -
-- 60:00 (Max) -—-1
QHD
While timer function is in progress,
you can change channels on the
unit with CH AV while “CANCEL/
SET” screen is not displayed.
SLEEP TIMER
This unit can be set for auto power off.
Press SLEEP repeatedly (
to set SLEEP TIMER. SLEEP TIMER 30
* Pressing DISPLAY with }
sieep timer set displays
remaining time. SLEEP Fi 60
Press SLEEP repeatedly
until “SLEEP TIMER 00” SLEEP TIMER 90
appears to cancel.
=
SLEEP TIMER 00
\
INSTANT ALARM
You can set a timer alarm up to 60 min. Useful when
you are cooking, etc.
Press TIMER/FM on the unit to display
the instant alarm CANCEL/SET screen.
Press CH AV on the
unit with CANCEL/SET
screen displayed to set
| alarm. (Time changes in
mare] the order shown left.)
=
<
о
Le,
D
=
=>
5
=
* Pressing TIMER/FM repeatediy on the unit
will change display as follows.
TV |, ETA fo |, ua
oc UNE” rc br
To cancel, press TIMER/FM then press ADD/DLT on
the remote while CANCEL/SET screen is displayed.
To increase timer in progress, repeat step 2. Time
will be rounded up to next 1, 5, or 10 minute interval.
{See chart left.)
<Example>
* If current time remaining is 12:15, countdown will
restart from 15:00.
e |f current time remaining is 9:15, countdown will restart
from 10:00.
Alarm will sound at 0: 00.
Press any button to stop
+ The volume of the alarm gradually increases for
one minute and then continues to beep until
any button is pressed.
19
Picture Adjustment
Press ACTION
to display MAIN MENU.
BEN) 1) Press AVA) 10
я [ll select “TV.”
? N © [| 2)Press ACTION to
sao display SET UP TV
screen.
ADD/DLT
A 1)Press AY to select SELECT
VIDEO ADJUST. ACH UP
2)Press > to display VOL
screen. €: VOL DOWN
IS) 1) Press AV to select
an adjustment item.
(See below right.)
2) Press «> to adjust.
== | To Reset Picture
NES Ea CONtrols.
PNE | Press AV and > to
| select and set
gel “NORMAL.”
All controls return to , -
their factory settings. Picture Adjustment
E COLOR Control
Adjust color intensity.
H TINT Control
Adjust for natura! flesh tones.
5 Press ACTION three times to exit. HB BRIGHTNESS Control
Adjust picture brightness.
E PICTURE Control
Adjust picture intensity by
adjusting both contrast and
color level in the proper
balance.
HB SHARPNESS Control
Adjust picture sharpness.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts € panasonic.com
FM Radio
FM Radio is ...
This unit has an FM radio with built-in antenna, 9
station preset, and a band range of 87.5 ~ 108.1
MHz. You can even set the On-Timer (page 18)
to wake up to your favorite radio station.
FM Radio Setup
Press FM/TV on the remote or
press TIMER/FM twice on the unit
to display FM radio mode.
1
3 Press a number
key (1-9) to select
the FM preset
number.
1)Press CH AV
to select the
desired radio
station. (Each
press changes
frequency 200 kHz.)
2) Press ADD/DLT
to set the radio
station.
Hold down CH A or
Y for a few seconds,
then release to
quickly scan for FM
stations in your area.
* To cancel, press CH
To Make Corrections,
select station with a
number key, then do step
3 again. A or Y while in
To exit FM mode, press search mode.
FM/TV on the remote or
TIMER/FM twice on the unit.
FM ANTENNA Setup
Make sure FM tuning is done
correctly (see FM Radio Setup).
Press ACTION
to display MAIN MENU.
———) 1)Press AVL DD
Tes] to select “TV.
br Br 2) Press ACTION
CS ot mir: | to display SET
écris a a = UPTV screen.
SET 1H ACTION.
Rat
PSV EE à) 1)Press AV to
‘ santana Select FM
Heo me A ANTENNA.
2) Press № 10
select
INT (INTERNAL)
в For Sapte TV users (EXTERNAL)
W For antenna users - Whichever
> “EXT” sounds the
best.
Press ACTION twice to end setup.
Using FM Radio
Press FM/TV on the remote or
press TIMER/FM twice on the unit
to display FM radio mode. <
O
HE A o | Press a ©
a e UM | number key |
do A naa (1-9) to select ME
(as ei a preset FM ©
e | number
J (see steps 2 and
3 on this page).
To cancel, press FM/TV on the remote
or TIMER/FM twice on the unit.
Г )
TIMER/FM
* FM radio cannot be recorded on a Video cassette.
+ You may get better reception by repositioning the unit.
» You cannot select FM Radio mode during playback or
record, or while a blue back screen (PROG, ACTION,
MENU) is displayed.
+ Once stations are set, the selected station and current
time are displayed when FM Radio mode is entered.
To remove time, press DISPLAY, If DISPLAY is
pressed again, the unit status screen appears.
imer mecordIng
You can set up to 8 programs to be recorded while
you are away.
Press PROG
to display SET PROGRAM screen.
1) Press AV to select
Ear > MER PROGRAMMING.
2) Press P to display
| | screen.
* |f a program is already in
memory, press AV, and
Pp to select an unused
program number.
Press AV to select '
and > or dto set
the recording DATE.
* 1-31 = One time
* DAILY = MON-FRI
» WEEKLY SUN-SAT
= Same time once a week
Example
Today's —7 SELECT AY Selection Order — DAILY
B==Qrr aria: 34 — 1 — mana B
Date | weer Л WEEKLY _ WEEKLY
(SAT) (MON) (SUN)
Repeat step 3 to set:
* start time, stop time
* Channel! (or LINE for outside source)
* Category [N/A (not applicable), SPORTS, MOVIE,
COMEDY, MUSIC, DRAMA]
* Speed (SP, LP, SLP)
Press PROG
(or ACTION) to end
the program.
To Enter More
| Press AV to select and
— P to set a blank program
number, and then repeat
step 3.
Press PROG twice (or ACTION)
to exit this mode.
* |f you're using a cable box, make
sure that it is tuned to the desired channel
and ihe power is left on for timer recording.
* PROG TIMER indicator lights on the unit.
22
[ Ready Check List
[J All connections are made.
OJ Your unit is plugged in.
[J The clock is set to correct time.
OJ The tape is long enough.
[J The record tab is in place.
=
ST |)
o
PROG TIMER Indicator
Timer Recording Using
unit Buttons
You can set a Timer Recording
using ACTION key on the unit.
(See page 13.)
VOL CH STOPRJECT REWE
0000 ME]
1 Press STOP/EJECT and REW
together without a tape inserted
to dispiay MAIN MENU,
2 Press AY + - to select “VCR”
and STOP/EJECT and REW
together to display SET UP
VCR screen.
3 Press AY to select “TIMER
PROGRAM” and + to display
the TIMER PROGRAM screen.
4) Repeat main steps 3 ~ 5.
For assistance. please call ; 1-800-211-PANA(7262) or send e-mail to : consumerproducts E panasonic.com E
#
Fo ``
Cancel a Timer Recording:
(Recording is in progress)
Hoid down STOP for a few seconds
to cance! the Timer Recording.
+ Any future daily or weekly recordings
Review, Replace or Clear Program
Contents : (Recording is not in progress)
1 Repeat steps 1 and 2 on page 22.
| will be performed as programmed. J
ADD/DLT
SELECT/
SET
»: VOL UP
4:vOL DOWN
PROG
2) Press AV to select
sl the desired program.
3
To Replace program...
As 1) Press » to display.
2) Press AV to select
and press «< ог»
to set new program
PA AF fe re TL LF PR FS RR
SELECT START DATE) Y SE
SELECT: A EE р,
ise AE contents.
oe 3) Press PROG
(or ACTION).
To Clear program...
Press PROG twice (or ACTION) to exit
this mode.
| Notes |
* 2 minutes before Timer recording is performed,
“PLEASE PREPARE FOR TIMER REC” appears
and/or the PROG TIMER Indicator flashes.
Be sure a cassette with record tab is loaded and the
unit is in Stop mode.
* If the start times of two programs overlap, the lower
numbered program will have priority.
* |f the start time for a Timer Recording comes up
during a normal recording or One Touch Recording
(page 14), the Timer Recording will not be
performed.
* If there is a power interruption of more than one
minute, the recording may not be performed or
continued.
+ If INCOMPLETE” appears after all items have been
set, check all entries and make necessary
corrections.
23
=!
=.
A
—
$
su
o
=
ape Operation
Search System is ...
Each time a recording is made, an invisible index mark is placed on the tape.
When timer recordings are made, program index and information are also included.
These index marks can be used to access or scan recordings.
Index Search
Go directly to the desired recording.
NE sean I Press SEARCH
ENTER/INDEXINUMBER IST IN FlaÿDack or
LC рн Stop mode to
ACA FI display INDEX
#; SEARCH screen.
Press number
==> keys
“E to select the
EE recording number.
KE + To calculate
number, see below.
Press FF or REW
to start search.
* Play begins at search
end. To search
я SEARCI FE forward or back 1
EVERSES SEARCH: REW REW index, press FF or
REW while screen
left in displayed (10
seconds).
Ш То calculate the Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
NU
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
DY TNT YN
1 +
EE: ejeje ©
NOTE: + indicates start points of each recording.
Us
* Make each entry within 10 seconds, or the
Index Search mode will be canceled.
+ If Index Search is started very close to an
index mark, that index mark may not be
counted in the search.
24
7 |
7 |
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts @panasonic.com
Locates end point of recording for continuity.
Press SEARCH twice in Playback or
Stop mode to display PROGRAM END
SEARCH screen.
Press FF
o ne a to start search.
Example of Program End Search operation.
Fig.1
PLAYBACK DIRECTION —
[Le Program 1
Program 2 or BLANK
End Pont]
|
Press SEARCH button
Press SEARCH button
FF
Fig.3 If search exceeds a few seconds in BLANK area.
Press SEARCH button
SCV E
FF
Upon locating end point...
The unit searches slightly past end point,
reverse searches, and plays the last few
seconds of the program, then stops.
[Ly _Progami Bano” JANO Program z ean]
|
Press SEARCH button SEARCH
FF , . ! REVERSE
PLAY! | SEARCH
—
; STOP
CD
* If Program End Search is started very close
to an index mark, that mark may be
skipped over,
* To cancel, press PLAY or STOP.
Ee]
— nt
==! 1 63-11-1508) "A
i
REW
00
O 0:
(ПОС
000
бе
Os
4
2
О
=
F
O10;
Auto Operation Functions
E Auto Shut Off
No broadcast signal in TV, blank tape is
Played for 5 minutes
3 Power turns off
* This feature is canceled if any button is
pressed during above mode.
EM Auto Playback
Insert a tape in Power off mode
> Power turns on
* Playback begins if tape has no record tab.
E Auto Rewind
Tape reaches its end
3 Rewind, 3 Stop
E Playback Auto Eject (Repeat Play is “OFF”)
Tape with no record tab reaches its end
3 Rewind, > Stop, > Eject
Tape Position Display
To find out present tape position and amount of
tape remaining.
Tape position cannot be detected for
C-Cassettes, tapes under 30 minutes, and
some other tapes.
Press TAPE POSITION
to detect current tape position.
“DETECTING TAPE
cerecring wee cosmos | POSITION is displayed only
when a cassette is first inserted
and it takes several seconds for
correct tape position to appear.
* The present tape position
indication and amount of tape
remaining (according to tape
speed) is displayed.
*Tape remaining time display
may not be precise.
Press TAPE POSITION (or wait 5
seconds) to return to normal screen.
* This function cannot display exact amount of
tape remaining for tapes under 30 minutes or
tapes over 120 minutes.
uonesado pasuesapy
25
Tape Operation (continued)
Set to see a recording over and over. By pressing the CMZERO button in Playback
Press ACTION mode you can skip over 1 to 3 minutes of
to display MAIN MENU. recorded tape in just a few seconds.
Press CM/ZERO repeatedly to
o "Press A ER , select skip time in Play mode.
es ja 2) Press ACTION * No indication appears.
raked to display SET ote
UP VCR screen. }
1st Press — 1 min Skip
E. 1 Press Ao 2nd Press — 2 min Skip
в PLAY.” ‘ 3rd Press —3 min Skip
2) Press p to set J
SEY A REPEAT PLAY
ы re E “ON” or “OFF.”
Press ACTION twice
to end setup. * Playback repeats when tape end is
reached or unrecorded portion over 30
seconds is detected.
Zero Search . During playback you may also press
To quickly retum to a specific tape counter location. select REPEAT “Co to on the unit to
Press DISPLAY during playback
to display the Counter.
| a) Press COUNTER
| RESET at the
IEE desired position to
E reset to “0:00:00.”
3 Continue playback, rewind, or
fast forward.
4 Press STOP.
| E Press CMZERO
К in stop mode to
| start ZERO
Е SEARCH.
* т: Present position mark Zero Search Note
V : Zero position mark . .
* Unit goes into FF or REW mode and * If a blank portion exists on the tape, and-
depending on the position of the y mark,
stops at the last poi
p ast point the Counter was display may be out of position.
set to 0:00:00. the v mar
26 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts € panasonic.com
90666
OJO ©;
Coo
COUNTER—HO D © =
ВЕЗЕТ ПО О © О) seLecT
O E Of ser
Ca] a [| 4:CH UP
a feu || CH DOWN
ACTION О || »:voLuP
С) © © || “VOL DOWN
"© G{ii-CMZERO
OO
Г 7
a a
Weak Signal Display ON/OFF
When “ON” is selected, the picture is displayed even
when a broadcast signal is weak or non-existent.
Press ACTION
to display MAIN MENU.
uE) 1) Press AV<>
Гео) to select “CH.”
VAR 2) Press ACTION
ENT er to display SET
UP CHANNEL
screen. |
ex) 1) Press AV to
| select WEAK
| SIGNAL
E DISPLAY.
ES: 2) Press P- to set
E “ON or “OFF”
* “ON” = Picture is displayed regardless of
signal condition, and may not
always be cleary visible.
“OFF”= Screen turns solid blue when
signal is absent or weak.
. =» If unit is connected to equipment which
has blue back feature, selecting “ON” will
have no effect on the other equipment.
Press ACTION twice
to return to the normal screen.
VCR Lock
All operations are prohibited except Timer
recording and tape eject. Useful for families
with small children.
In stop mode, hold
down REC on the
unit without a
cassette inserted for 7
seconds to tum “ON.”
Please ignore “NO
CASSETTE”
waming.
Repeat above with or
without cassette to
tum “OFF.”
* VCR Lock is canceled automatically
after about 24 hours if clock is set,
Special VCR Features
uoneladp pasueapy
Special VCR Features (continued)
Preset Caption
Press ACTION
to display MAIN MENU.
uN 1) Press AY to
¡Mei select “CH.”
esa À b1 2) Press ACTION to
E : OÙ display SET UP
CHANNEL screen.
1) Press AV to select
EUA | CHANNEL CAPTION.
Teor] 2) Press > to display
e screen.
1) Press AY to select
PRESET CAPTION,
2) Press P to display
screen.
* To create your own
captions, go to “Manual
Caption” on page 29.
NE] 1) Press АУ 10 select
ea a station.
R= 2) Press P to move
Seres | cursor to the right.
aus 3) Press AV to select
channel number.
sn 4) Press < to set
3%] preset captions.
is2u{ * Repeat step 5 until the
Caption List is
complete.
To Make Corrections
Press AY, then P to select channel number.
Press AY to change, or ADD/DLT to delete.
Press ACTION four times
to end setup.
28
For assistance, please cail : 1-800-211-PANA(7262) or send e-mail to : consumerproducts @panasonic.com
Channel Caption is...
Station names, e.g. ABC, TNN, etc.
are set so they will appear when a
channe! is selected. Choose 24
preset names (Preset Caption), or
make up to 10 names of your own
(Manual Caption).
S ready Check List
[J You need a list of stations and the
channel numbers you receive them on.
Manual Caption
Do “Preset Caption” steps 1-3
(page 28).
CHANNEL CAPTION", 1) Press AV to select
Upa Eta LE MANUAL CAPTION.
ia de
PRESET CAPTIÓN >
meen cc 2) Press P to display
. X . Ie =
iE TEE An
: Na L
LEGT: LT, Screen.
BET my XO Foe an
END SS ACTION e
1) Press AY to select
CH NUMBER.
| 2) Press P to move
веера y 70144 | cursor to the right.
Eo Mero. “| * Channels already set
- and channels deleted
from Channel Memory
SELECT/ are not displayed.
SET * You can set a total of ten
ACH UP channe! captions with up
v:CH DOWN :
» VOL UP to four characters each.
4:-VOL DOWN
a TEE A A
CH NUMBER, 3 CAPTION. :
. “о = “4 oe ea Nr
EN ATL
A AA Dao Der
¡OO!
0 ©
00000:
9000
* OOOO
MANUAL GAPTIÓN .. | 1) Press AV to select
CH NUMBER...” CaPTION | and to enter your
a Ta, E caption.
Selena ve ne, | * Characters change in the
“END. -7 ACTION following order.
[A B—-C------ Z— BLANK— — —&
9------2—1-0—/—!
* Press ff repeatedly to move the
cursor to “CH NUMBER.” Repeat
steps 3 and 4 as desired.
To Make Corrections
Press AY, then P to select channel number.
Press AV to change, or ADD/DLT to delete.
I»
a
=
fa)
pu
LE]
©
ФВ
о
=
®
D
=
O
os
Press ACTION four times
to end setup.
29
This unit writes program data (see example
below) for about the first 10 seconds of every
recording. The information is then displayed
about 10 seconds after playback begins.
Press ACTION
Time Stamp Feature
to display MAIN MENU,
1)Press AY<>
lo to select “VCR.”
mE 2) Press ACTION
to display SET
UP VCR screen.
1)Press AV to
select TIME
STAMP.
2) Press > to set
“ON” or “OFF.”
* When “OFF” is selected, the program data
is written on the tape, but will not be displayed.
Press ACTION twice
to return to normal screen.
<Time Stamp Example >
Normat/ One
Y Ready Check List
OI The clock is set to correct time.
J The record tab is in place.
Touch Recording Timer Recording When Clock is not set...
12/18/2001 TUE
12: 00PH
CH 08 ABC
12:00PM -
30
12/18/2001 TUE
1:00PK
CH 08 ABC MOVIE
For assistance. please call : 1-800-211-PANA{7262} or send e-mail to :
ER
CH 08 ABC
consumerproducts € panasonic.com
V-Chip Control Feature
Process of V-Chip Control Feature V-Chip Control Feature is...
EET Seturj-> Blocking
©
©:
00000
00000:
O
ss UMBER
je Keys
O ADD/DLT
O a TA
6 = & ACH UP
Сан v:CH DOWN
acTioN—HE CD || VOL DOWN
555606
D OO
SO
Changing your secret code
* YOU will need your current code.
Do steps 1 - 4. In step 5, press
ADD/DLT to clear current code.
Repeat steps 4 and 5 to enter
new code.
Notes
* DO NOT forget your secret code.
* Once ratings are set, restricted
tapes or programs cannot be
accessed unless the secret code
is entered.
\ A
This unit has a built-in V-Chip Control which atlows
you to block unwanted TV usage based on
US MOVIES and US TV PROGRAMS Ratings.
Enter Secret Code |
A 4-digit code must be entered to view a blocked
program or change rating settings.
Press ACTION
to display MAIN MENU.
Saa) 1) Press AV to
select “TV.”
Ka = 2) Press ACTION to
display SET UP TV
screen.
BEA 1) Press AV to select
LOCK.
que 2) Press P to display
screen.
sk: 1) Press number
To Make Corrections
Press 4 repeatedly to
move the cursor.
Press number keys to
make the correction.
keys to enter your
secret code.
» 2) Enter same code
again for
confirmation.
* Step 2) not necessary
when changing rating
or secret code.
* Take care that you are
not observed entering
‘the secret code.
GR) Press to display US
asoma: Ratings menu (see
pages 32, 33).
al Or
es Press ACTION three
times to exit.
31
>
2
=
jut]
po
gp)
a
с)
e
Lo
i
oy
=
o
=
V-Chip Control Feature (continued)
if LOCK menu is not displayed, do
“Enter Secret Code” steps on page 31.
Setup US MOVIES Ratings
NC 1) Press AV to select
US MOVIES.
ME 2) Press > to set
CHANGE RSETT 1 NGS BEE “ON” or “OFF.”
E “ON” > V-Chip Control is activated.
EH “OFF” = V-Chip Control is deactivated.
* “NEXT PAGE" displays CANADIAN V-Chip setting
menu. Not necessary except when viewing Canadian
tapes or broadcasts.
CN 1) Press AV to select
es Е > 2) Press > to display
CHANGE SETTINGS.
maman 1) Press AY to select
LESE VIEW NR
* PROGRAMS?
Mas 2) Press > to set
“YES” or "NO."
NR (Not Rated) PROGRAMS
Some movies, such as old movies
or foreign movies usually have no ratings.
and to set
ratings to be
blocked.
(See ratings chart
right.)
VT PROGRAMS? EYES *) 1) Press AY to select
menu and continue with US TV
PROGRAMS Ratings Setup (next page).
Or, press ACTION four times to exit.
5 Press ACTION to redisplay LOCK
32
Process of V-Chip Control Feature
Enter соде|->Е Biooking
v:CH DOWN
» VOL UP
4: VOL DOWN
US MOVIES RATINGS
G ||GENERAL AUDIENCE:
All ages admitted.
PG ||PARENTAL GUIDANCE:
Some material may not be suitable for
children.
PARENTS CAUTIONED:
Some material may be inappropriate
for children under 13.
R ¡RESTRICTED:
Children under 17 must be
accompanied by a parent or adult.
OVER AGE 17 ONLY:
No one 17 and under admitted.
X ||ADULTS ONLY:
For assistance. please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
If LOCK menu is not displayed, do
“Enter Secret Code” steps on page 31.
Setup US TV PROGRAMS Ratings
à 1)-Press AV to select
US TV
PROGRAMS.
“wa 7) Press to set
“ON” or “OFF.”
E “ON” > V-Chip Control is activated.
E “OFF” 3 V-Chip Control is deactivated.
CD
* “NEXT PAGE” displays CANADIAN V-Chip setting
menu. Not necessary except when viewing Canadian
tapes or broadcasts.
2
ES) 1) Press AV to select
"ora CHANGE SETTINGS.
Ger] 2) Press » to display
screen.
1) Press AV to select
VIEW NR
PROGRAMS?.
NR (Not Rated) PROGRAMS
Some TV shows, such as news, sports,
weather, bulletins, emergency information
usually have no ratings.
Y 1) Press AV to select
| and to set ratings
to be blocked.
(See ratings charts
right.)
+ Ratings highlighted
in Green will be
blocked. Ratings in
white letters will not
You may select from
‘standard TV ratings
(chart 1), orcustomizeto be blocked.
à specific content rating
{chart 2).
Press ACTION four times
to exit this mode.
US TV PROGRAMS RATINGS:
Chart 1
TV-Y [| FOR ALL CHILDREN:
Content specifically geared to young
viewers ages 2-6,
TV-Y7 || FOR AGE 7 AND OLDER:
May contain mild physical or comedic
violence which may frighten children
under 7,
TV-G || GENERAL AUDIENCE:
Contains little or no violence, strong
language, or sexual dialogue or
situations.
TV-PG|{ PARENTAL GUIDANCE:
May contain infrequent coarse
language, limited violence, some
suggestive sexual dialogue and
situations.
TV-14 || PARENTS CAUTIONED:
May contain sophisticated themes,
sexual situations, strong language,
and more intense violence.
TV-MA|| MATURE AUDIENCE:
May contain mature themes, profane
language, graphic violence, and
sexual situations,
US TV PROGRAMS RATINGS:
Chart 2
FV | Fantasy Violence
V | Violence
S || Sexual Situations
L | Adult Language
D || Sexually Suggestive Dialogue
>
oO
<
2
=
{>
{D
tL
3
—
a,
=
o
=
33
V-Chip Control Feature (continued)
Process of V-Chip Control Feature
[Enter Code]~>[Setup]—> Clu)
Blocking Message
<When v-Chip Control is activated
à » If a program or movie
| exceeds the ratings you
have set, a message will
appear on a black
muted.
To View a Blocked Program / Movie
[Temporarily Deactivate V-Chlp Control]
Enter your secret code (ACCESS CODE) in
the Blocking Message screen.
* V-Chip Control is reactivated when
power is turned off or power failure occurs.
[Deactivate V-Chip Control]
Enter your secret code (steps 1-4 page 31).
Then, set US MOVIES and/or US TV
PROGRAMS to “OFF” using AY and» keys.
(Ratings set on pages 32 and 33 and retained
and will be in effect when V-Chip Control is
activated again.)
34
background and sound is
For assistance, please call : 1-800-211-PANA(7262) or send e-mai to : consumerproducts € panasonic.com
SELECT,
SET
ACH UP
wv: CH DOWN
» : VOL UP
VOL DOWN
On-Screen Display (OSD)
VCR Status & Clock Display
Press DISPLAY
to display or remove the overlay.
Channel Caption
See pages 28, 29.
Function Status ( pag )
Current Time
Rec Time Remaining Counter
(OTR mode only, see
age 14.
page 14.) = Tape Speed
12/27/1999 MON
12:00PM — 1:00PM
CH 08 ABC MOVIE |
EL eh
o
Time Stamp Data (See page 30.)
Blue Screen Display
Whenever a blank section of a tape comes up in Play
mode, or when the selected channel has no broadcast
signal with the Weak Signal Display set to “OFF” (see
page 27), the screen will turn solid blue.
Channel % Function Display
When a function button is pressed (PLAY, FF, etc.) or
you change channels, the unit mode or channel
number will be displayed. (Some station names may
also appear if Channel Caption is set. See pages 28,
=;
=
a
-<
©
c
=
=]
—y
O
-
3
=
a
==
NO CH FOUND PUEASE'CHECK + If no active channels are found for
Caution Page
ANTENNA CABLE CONNECTIONITHEN| CHANNEL MEMORY... 18-11
PUSH CH UPKEY/AGAIN |
PLEASE SETICUOCK'BERORE Iu * If you attempt to set or review a Timer
PROGRAMMING Recording, or set the On-Timer and the Clock | 8-13
Is not set...
* If you press REC, and a cassette is inserted | 4 14
with no record tab... ’
ТОС CANCEINTIMER REC HOLD,DOWNE| * if you press STOP during a Timer | 23
STOP. KEY/FORT'APPROX:3 SECA jl Recording...
NO CASSETTE |e If you press PLAY, FF, REW, or REC 14
RELEASE
INSERTA CASSETTE BUE without a cassette inserted...
PUEASEPREPAREIFOR:TMER RECI! « If the unit is not in Stop mode or a cassette
with record tab is not inserted two minutes | 22, 23
before a Timer Recording is about to begin...
BVIDEO HEADS MAY/NEED, CLEANING * If head cleaning becomes necessary while
PLEASE INSERTIHEAD CUE ANINC playing back a tape... 37
CASSETTE OR REFERITO MANUALS
END:IPLEAYKEY) SE
VCR TOCK'ACTIVATED BN | © If you press a function button other than 27
36
STOP/EJECT or POWER while the unit is in
VCR Lock mode...
For assistance, please cali: 1-800-211-PANA(7262) or send e-mail to ; consumerproducts @panasonic.com
Unit Information
Playing older or damaged tapes may eventually
cause video heads to become clogged.
Head Clog Sensor
During playback this screen appears if
clogging is detected. To remove screen,
press PLAY on the remote or unit.
* Use “dry” type head cleaning cassette only.
(Part No. NV-TCL30PT is recommended.)
* Follow cleaning tape directions carefully.
Excessive use of head cleaning tape can
shorten the video head life.
* If head clog symptoms (eme
persist, contact your
nearest Factory Service
Center or authorized
Service Center.
(See Page 39.)
DST (Daylight Saving Time)
Unit auto adjusts clock for DST (Daylight Saving Time.)
E Spring (First Sunday in April)
DST : ON =» Sets clock ahead one hour.
EM Autumn (Last Sunday in October)
DST : ON » Turns clock back one hour.
* |f your area does not observe Daylight Saving
Time, select DST:OFF.
* Keep these time changes in mind when
programming the unit for timer recordings.
Record/Playback Time
Only use tapes with the mark in this unit.
Tape Speed Type of Video Cassette
Setting T60 | T1120 | T160
SP (Standard Play) | 1 Hour 2 Hours 0 Mies
5 Hours
LP (Long Play) 2 Hours | 4 Hours 20 Minutes
SLP (Super Long Play)! 3 Hours | 6 Hours | 8 Hours
Display
Picture Tube:
VCR
Video Recording System:
Audio Track:
Tuner
Broadcast Channels:
CABLE Channels:
FM Radio
Band range:
General
Power Source:
Power Consumption:
Television System:
Speaker:
Operating Temperature:
Operating Humidity:
Weight:
Dimensions:
Head Cleaning
13 inch measured
diagonal 90° deflection
Picture Tube
2 rotary heads helical
scanning system
(PV-C1321/PV-C1331W)
À rotary heads helical
scanning system
(PV-C1341/PV-C1351W)
1 track
VHF 2 - 13, UHF 14 - 69
Midband A through | (14 ~ 22)
Superband J through W
(23 ~ 36)
87.5 ~ 108.1 MHz
120 V AC, 60 Hz
Approx. 69 watts (Power on)
Approx. 4.0 watts (Power off)
EIA Standard NTSC color
1 piece
5°C ~ 40°C (41 °F ~ 104 °F)
10% - 75%
12 Kg (26.4 Ibs.)
386 (W) X 385 (H) X
374 (D) mm
15-316" (W) X 15-316" (H)
X 14-3/4" (D)
Note: Designs and specifications are subject to
change without notice.
Features for a Quality Picture
Digital Auto Tracking
Continuously analyzes the signal and adjusts for
D IA
optimum picture quality.
nual T n
|
Use during Playback and Slow Motion mode to
reduce picture noise. Press the 3 or 6 number key
on the remote control or CH AY on the unit until the
picture clears up. To retum to Auto Tracking, press
POWER off, then on again a few seconds later.
V-Lock |
<For model PY-C1341/PV-C1351W only>
in Still mode, the 3 or 6 number key on the remote
control or CH AY on the unit operate as a V-Lock
contro! to reduce jitter.
i nol
3
Before Requesting Service
Check the following points once again if you are having trouble with your unit.
Power Correction
No power... * Completely insert Power Plug into an AC outlet.
+ Set POWER button to ON,
Monitor Correction
No picture or sound... Make sure your antenna m {TV or CABLE), is correctly set. (P. 8-11)
Completely insert Power Plug into an AC outlet.
Set POWER button to ON.
Adjust BRIGHTNESS, SHARPNESS, and PICTURE cantrols in the
SET UP TY menu. (P. 20)
+ + . &
Poor picture with normal sound...
Poor sound with normal picture... | * Adjust VOLUME control. (P. 16)
Poor TV reception... * Adjust SHARPNESS and PICTURE controls in the SET UP TV menu. (P. 20)
No color or poor color... * Adjust TINT and COLOR controls in the SET UP TV menu. (P. 20)
Ghost (multiple) images... * Install a directional antenna.
TV programs cannot be watched... * Make sure the selected channel is in units memory. (P. 12-13)
Channel cannot be selected... * Only the channel being recorded can be viewed on this unit.
VCR Correction
TV program cannot be recorded... = Make sure your antenna system (TV or CABLE), is correctly set. (P. 8-11)
* Make sure cassette record tab is intact. (P.4)
Timer recording cannot be * Check that clock is set to current time and date.
performed... * Make sure DSS/CABLE box (if used) is left on and tuned to channel to
be recorded.
+ Set recording Start/Stop times correctly. (P. 22-23)
* Timer may not be performed or continued if a power
interruption of more than 1 minute occurs before or during a Timer
recording even after power is restored.
No playback picture, or the playback Adjust TRACKING control in either direction. (P. 37)
picture is noisy or contains streaks... Try Head Cleaning. (P. 37)
VCR cannot be controlled... Make sure VCR LOCK is set to off. (P. 27)
Make sure unit is not in a Timer Record operation.
. # a
Remote Control Correction
Unit cannot be controlled... » Aim remote at remote sensor on unit (P. 7) so that signal is
unobstructed.
» Inspect the remote batteries. (P. 4)
* Make sure VCR LOCK is set to off. (P. 27)
* Exposing unit remote sensor to direct fluorescent or outdoor light may
causa signal interference.
ACTION, PROG and FM/TV * Check remote batteries.
buttons cannot be selected...
Miscellaneous Correction
Video cassette cannot be * Insert the cassette window side up; record tab facing you.
inserted...
Video cassette cannot be « Completely insert Power Plug into an AC outlet.
removed...
Tape cannot be ejected or + Try ejecting or inserting the tape again after tuming POWER off, then
inserted... back on. :
Video cassette ejects when a + Make sure cassette record tab is intact. (P. 4)
recording is started, or the power
is tumed off for timer recording...
In Stop mode, the VCR motor + To enable Quick Play mechanism, the VCR cylinder will rotate for
(CYLINDER) continues to rotate... about 3 minutes. This reduces response time from Stop to Play mode
and from Play to Rewind Search mode. -
VCR cannot be controlled... * Make sure VCR LOCK is set to off. (P. 27)
If you cannot resolve the problem, please call the Customer Satisfaction Center for
product assistance at 201-348-9090.
To locate an authorized servicenter call toli free 1-800-211-PANA(7262)
or send e-mail to : consumerproducts € panasonic.com.
For assistance, please call ; 1-800-211-PANA(7262) or send e-mail to : consumerproducts € panasonic.com
Service Center List
For Product Information, Operating Assistance, Literature Request, Dealer
Locations, and all Customer Service inquiries please contact:
1-800-211-PANA (7262). Monday-Friday 9 am-9 pm Saturday-Sunday 9 am-7 pm, EST.
or send e-mail to : consumerproducts @panasonic.com
Web Site: hitp://www.panasonic.com
You can purchase parts, accessories or locate your nearest
servicenter by visiting our Web Site.
Accessory Purchases:
1-800-332-5368 (Customer Orders Only)
Panasonic Services Company 20421 84th Avenue South, Kent, WA 98032
(6 am to 5 pm Monday - Friday; 6 am to 10:30 am Saturday; PST)
(Visa, MasterCard, Discover Card, American Express, Check)
Factory Servicenters Locations
CALIFORNIA GEORGIA MICHIGAN TEXAS
6550 Katella Avenue | 8655 Roswell Road | 37048 Van Dyke 13615 Welch Road
Cypress, CA 90630 | Suite 100 Avenue Suite 101
Atlanta, GA 30350 Sterling Heights, Farmers Branch,
800 Dubuque Avenue MI 48312 TX 75244
S. San Francisco, ILLINOIS
CA 94080 9060 Golf Road MINNESOTA WASHINGTON
Niles, il. 60714 7850-12th Avenue 20425-84th Avenue
20201 Sherman Way South Airport South Kent,
Suite 102 1703 North Randall | Business Center WA 98032
Canoga Park, Road Elgin, IL 60123 | Bloomington,
CA 91306 {Pick-up / Drop-off MN 55425
only) HAWAII
3878 Ruffin Road OHIO 99-859 Iwaiwa Street
Suite A MARYLAND 2236 Waycross Road | Aiea, Hawaii 96701
San Diego, CA 92123| 62 Mountain Road Civic Center Plaza Phone
Glen Bumie, Forest Park, OH (808) 488-1996
COLORADO MD 21061 45240 Fax
1640 South Abilene (808) 486-4369
Street Suite D MASSACHUSETTS | PENNSYLVANIA
Aurora, CO 80012 60 Glacier Drive 2221 Cabot Blvd
Suite G West Suite B
FLORIDA Westwood, Langhorne, PA 19047
3700 North 29th MA 02090
Avenue Suite 102
Hollywood, FL 33020
: = Puerto RICO
= oi rue HICO Panaso ale e 8 = ante
Ave. 05 de anteria : ADE al P 5 a, + = ее
Phone (78 U-43500 FE > e
As of January 2000
39
Spanish Quick Use Guide/Guia para rapida consulta
Como realizar la
Configuracion Inicial
Presione POWER en el control
remoto o en la unidad.
PA SELECT ANSIA
pes EDO EM
Cuando encienda
el VCR por
primera vez,
aparecera la
antalla SELECT
SE Ш ANGUAGE.
. ajusta el idioma Incorrecto, realice
los pasos de la página 9 “Reajuste de
todas las Funciones de Memoria de
la unidad”.
* Active la caja de cables y ajústela al
canal PBS en su huso horario.
Si usted utiliza receptor DSS, este debe
estar apagado.
FUACKON AUTOTCARELO
CONECTE ENCABLEÍDE LAR)
ANTENA Y,SI ESTA USANDO
UNA CAJA DERTV POR CABLE
SINTÓNICE AL CANAL PBS
DE SU LOCALE LUEGOS
I POR FAVOR GPRINIA CH UPS
eT Ой
a E o GO
Presione CH A
para seleccionar
Inglés (English).
O
Presione CH Y
para seleccionar
Español.
O
Presione VOL +
para seleccionar
Francés (Français).
Aparecera la
pantatla CHANNEL
/ CLOCK AUTO
SET.
Presione la tecla CH
A para iniciar el
funcionamiento de
CHANNEL / CLOCK
AUTO SET. El ajuste
del CHANNEL /
CLOCK se lleva a cabo
automáticamente, si la
configuración se ha
terminado, se visualiza
la pantalla siguiente.
Si aparece la
pantalla “FIJACION
AUTOMATICA DEL
RELOJ
| INCOMPLETO”,
: ME ajuste el reloj
utilizando los
procedimientos de
AJUSTE MANUAL
DEL RELOJ”
mostrados en la
página 9.
40
Ajuste Manual del Reloj
Si el ajuste automático del reloj no se ha
completado, ajuste el reloj manualmente de
la siguiente manera:
1) Presione la tecia ACTION en el control
remoto para visualizar la pantalla del
menú RELOJ.
2) Presione AW para seleccionar el mes y
D para ajustar, De la misma forma,
seleccione y ajuste la fecha, año, hora y
DST (Hora de Verano).
3) Presione dos veces la tecla ACTION
para poner el RELOJ en marcha y salir.
Ajustar de nuevo el reloj
1 Presione ACTION para exhiba el
menu.
Presione A Y <>
para seleccionar -
“RELOJ”.
Presione ACTION.
2 E
Presione AY para
seleccionar
mun E “MANUAL” y luego
AJUSTELZONAY HORAT:16 .
ELEGIR aRy) presione b.
FAJARF ar
TERM | NAR ACTION
Presione A Y y <>
para seleccionar y
ajustar la hora y la
fecha.
Presione ACTION dos veces para que
el reloj comience a funcionar y salir
desde este modo.
Por ayuda, llame al 1-800-211-PANA(7262) o envie e-mail a : consumerproducts € panasonic.com
Operaciones basicas para
la reproducción
Inserte un casete.
* El videograbador combinado se enciende
— automáticamente.
Presione PLAY.
* La reproducción comienza
automáticamente si el casete no tiene la
lengueta para prevención de grabación.
M Para encontrar una escena en particular
Búsqueda hacia adelante > Presione FF
Búsqueda hacia atrás > Presione REW
Para ver una imagen fija (congelada) 3
Presione PAUSE/SLOW
Para ver en cámara lenta > Mantenga
pulsado el botón PAUSE/SLOW en el modo
de imagen fija
Para ver imágenes cuadro a cuadro 3
Presione PAUSE/SLOW en el modo de
imagen fija
Para parar > Presione STOP
Para rebobinar la cinta > Presione REW
Para hacer avanzar la cinta rápidamente >
Presione FF
Para expulsar la cinta > Presione EJECT
en el control remoto o STOP/EJECT en el
videograbador combinado
Operaciones basicas para
la grabacion
Inserte un casete con la lengueta
para prevención de grabado.
automáticamente.
Seleccione el canal.
Presione CH 4Y olas teclas
numéricas correspondiente.
Seleccione la velocidad de
grabación.
Presione SPEED.
SP = reproducción normal
LP = reproducción larga
SLP = reproducción super larga
* La velocidad seleccionada debe aparecer
en la pantalla.
Comience la grabación.
Presione REC.
* Para editar partes no deseadas de una
grabación, presione PAUSE/SLOW para
hacer una pausa durante la grabación.
* No podrá ver otro canal durante la grabación.
E Para parar > Presione STOP.
E El videograbador combinado
deja de grabar a una hora prefijada.
(Grabación de un toque)
Presione REC repetidamente para
ajustar la hora de grabación (30 min
- 4 horas.) CI
J
4
DO #+— 3:00-#+— 2:00 #+— 1:30
* El videograbador combinado se enciende
Grabación con temporizador
1 Exhiba FIJAR PROGRAMACION.
Presione PROG.
| . FIAR FRÖGRAMAC FON E MPORIZADOR
5 mm 1) Presione AY
EASY para seleccionar.
Аве 2) Presione > para
exhibir.
* Si ya existe un programa en la memoria, presione
AY y )> para seleccionar un número de programa
sin usar.
reo =) Ajuste la fecha de
ME == = grabación.
as e 1) Presione AY
reste
para seleccionar.
2) Presione P o «
para ajustar.
* 1 - 31 = Grabación unica
* DIARIO = a la misma hora de lunes a viernes
* SEMANAL = a la misma hora una vez a la
semana
Beer 91—1— 2-8
Fecha de hoy = 7 AY Ord pars seat DIARIO
U SEMANAL I MANAL
(SAB) Ny — NOM
Repita el paso 3 para ajustar:
hora de comienzo, hora de parada, cana! o LINEA
para una fuente exterior), categoría [N/O (n
aplicable), DEPORTE, CINE, COMEDIA, MUSICA,
DRAMA, velocidad (SP, LP, SLP)
E EE E e =
Presione PROG
(0 ACTION.)
CANCELAR 1 AGBIDLT Para introducir
ELEGHR Pe: 4 Y -
más programas.
SERÍA. oo AGT on presione AY y > para
seleccionar y ajustar el
número de programa
en blanco, y luego
repita los pasos 3 y 4.
Salga de este modo.
Presione PROG dos veces (o
ACTION.)
* Si está usando un decodificador de TV
cable, asegúrese que se encuentra en el
canal deseado y que la alimentación
queda conectada para grabar con
temporizador,
* El indicador PROG TIMER se enciende
en el videograbador combinado.
5
41
Termine el programa.
NLR
Limited Warranty
Panasonic Consumer Electronics Company,
Division of Matsushita Electric Corporation
of America, One Panasonic Way
Secaucus, New Jersey 07094
Limited Warranty
Panasonic Sales Company,
Division of Matsushita Electric of Puerto Rico, Inc.
AVE. €5 de Infantería, Km. 9.5 San Gabriel
Industrial Park Carolina, Puerto Rico 00985
PANASONIC Video Products
Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively referred to as “the Warrantor”)
will repair this product with new or refurbished parts, free of charge, in the USA or Puerto Rico, in the event of a defect
in materials or workmanship as follows (all time periods commence from the date of the original purchase):
PRODUCT |PARTS LABOR SERVICE CONTACT NUMBER
CAMCORDER | ONE (1) YEAR, EXCEPT [NINETY (90) DAYS Carry-In or Mail In |1-800-211-PANA(7262)
CCD IMAGE SENSOR
CCD IMAGE SENSOR |NINETY (90) DAYS
= SIX (6) MONTHS
"| VCR ONE (1) YEAR NINETY (90) DAYS Carry-In or Mail In |1-800-211-PANA(7262)
AN MIXER | ONE (1) YEAR NINETY (90) DAYS Carry-In or Mail In |1-800-211-PANA(7262)
MONITOR- | ONE (1) YEAR, EXCEPT CHT [NINETY (90) DAYS Carry-In: 21” CRT |1-800-211-PANA(7262)
VCR . CRT - TWO (2) YEARS | CAT - NINETY (90) DAYS | and Smaller
Combination In-home or camy-in:
22” CRT and Larger
Batteries (if included) - New rechargeable batteries in exchange for defective rechargeable batteries for ten (10)
days. Non-rechargeable batteries are not warranted.
Tape (if included) - New video cassette tape in exchange for a defective video cassette tape for five (5) days.
In-home, carry-in or mail-in service, as applicable, in the USA can be obtained during the warranty period by
contacting a Panasonic Services Company (PASC) Factory Servicenter listed in the Service Directory.
Or call toll free contact number listed above, to locate an authorized PASC Servicenter. Carry-in or mail-in service
in Puerto Rico can be obtained during the warranty period by calling the Panasonic Sales Company telephone
number listed in the Servicenter Directory.
This warranty is extended only to the original purchaser. A purchase receipt or other proof of the date of the
original purchase is requires before warranty service is rendered.
This warranty only covers failures due to defects in materials and workmanship which occur during normal use
and does not cover norma! maintenance, including, but not limited to, video and audio head cleaning. The
warranty does not cover damage which occurs in shipment, or failures which are caused by products not supplied
y the warrantor, or failures which result from accident, misuse, abuse, neglect, mishandling, misapplication,
alteration, modification, faulty installation, set-up adjustments, improper antenna, inadequate signal pickup,
maladjustment of consumer controls, improper operation, power line surge, improper voltage supply, lightning
damage, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or
service by anyone other than a PASC Factory Servicenter or a PASC authorized Servicenter, or damage that is
attributable to acts of God.
LIMITS AND EXCLUSIONS
There are no express warranties except as listed above.
THE WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
(INCLUDING, WITHOUT LIMITATION, DAMAGE TO RECORDING MEDIA) RESULTING FROM THE USE OF
THIS PRODUCTS, OR ARISING OUT OF ANY BREACH OF THE WARRANTY. ALL EXPRESS AND IMPLIED
WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR
PURPOSE, ARE LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how
long an implied warranty lasts, so the above exclusions or limitations may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
If a problem with this product develops during or after the warranty period, you may contact your dealer or
Servicenter. if the problem is not handled to your satisfaction, then write to the Consumer Affairs Department at
the Panasonic Consumer Electronics Company address above.
SERVICE CALLS WHICH DO NOT INVOLVE DEFECTIVE MATERIALS OR WORKMANSHIP AS
DETERMINED BY THE WARRANTOR, IN ITS SOLE DISCRETION, ARE NOT COVERED. COSTS OF SUCH
SERVICE CALLS ARE THE RESPONSIBILITY OF THE PURCHASER.
warvid 8/8/2000
42
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts E panasonic.com
Notes
Notes
INDEX
À. ACCESSOTIES ……….….….….……rcrsscssrareenensens 4
Audio Mute ............. ee... ener ue 16
Auto Operation Functions..................... 25
В Batteries... eee, 4
Before Requesting Service .................. 38
Before Using ................e.++.....—.en 0 0..— 4
Blocking Message ................e.....e.=.... 34
Blue Screen Display ................... en... 35
C Caption On Mute rer 17
Channel .............. eee. er... 8 - 13, 35
Channel Caption ...................... 17
CIOCK ET 12
Closed CaptiOM es 17
Commercial Skip …….…..….……..….…..….………………... 26
Connection ers 8-11
Connections, DSS / Cable Box ..... 10 -11
Connections, Outdoor Antenna ....... 8-9
Copy Your Tapes (Dubbing)................. 15
D DST (Daylight Saving Time) ................. 37
E Eject tape eau V4
F Fast Forward... 14
FM Radi0 ….......….….....envessesserrererensaranure 21
Forward Search es 14
Frame by Frame Advance ...................... 14
Front Panel Indicators ................. 7
Function Display ..................remeeeeremee 36
H Head Cleaning ..................——...........—— 37
| important Sateguards and Precautions ... 2
Index Seas ran 24
ог
Initial Setup for ANT. / Cable Connection ... 8
Initial Setup for DSS / Cable! box Connection .. 10
input Mode... eanedennence aman ..15
INSTANT ALARM. eneceradneanenaeneenenvecemenena. 19
LANGUAGE «overnite eee 8-13
Limited Warranty ................ ereccion 42
Location of Controls ....... ‚ 6-7
NIGHT Mode …….…..…......….…..….…errrrerrrerceee 16
100 KEY... veer, 16
One Touch Recording ....................... 14
ON-TIMER with Alarm... 18
P Phones .................eeen nina 16
Playback .................ee..e.ereininenenmen ene 14
Picture Adjustment ......................—.—.
Program End Search .....................——.—.—
nea... 24
Q Quality Picture ………….….…..…ee 37
В Rapid TUNE coer, 16
Rec{ord) ... corneas .14
Record/Playback Speed Settings... 37
Remote Control Buttons 6
a ..........ннниннеееннненннннннеым 26
Reset Language, Channels, Clock ...... 12
A ce 9
Reverse SearCH ee 14
Re WO errereer 14
S Secret Code .................. eee 31
Service Center List... 39
SELF-DEMO Mode ……….….…..….….…….….………… 4
Sleep Timer cover eevee 19
Slow Motion …..…....….…….…rccssenra res ene sas vous 14
Spanish Quick Use Guide .................... 40
Special VCR Features 27
Specifications ...............e..—rerreresererereceres 37
Still PiCture ...............em—m—__rerioevicerreren ene. 14
STOP .............e.7iecencenornernecinennenaneneca ene. 14
T Tape Erasure Prevention ................... 4
Tape Position Display ....................—.... 25
Time Stamp ..................eeenenereere 30
Time Zone Adjust ........................e...... 13
Timer Program Review, Replace, Clear ...
Timer Recording ... censarene ren a sens
Timer Recording Cancellation . rer EEE
TV Operation vers nice,
TV Timer Features.................——.——....—._...
U Unit, Front/Rear view ..........................
US MOVIESTV PROGRAMS Ratings
V VCR LOCK eerie rss eae
VCR Status & Clock Display ................
V-Chip Control Feature ......................
W Warning and Instruction Displays
Weak Signal Display ON/OFF ..............
Z Zero Search ...................... een
uONeULOJUL NOA 1OJ
Panasonic Consumer Electronics Company,
Division of Matsushita Electric Corporation of America
One Panasonic Way Secaucus,
New Jersey 07094 ,
Panasonic Sales Company (“PSC”),
Division of Matsushita Electric of Puerto Rico, Inc,
Ave. 65 de Infanteria. Km. 9.5
San Gabriel Industrial Park, Carolina, Puerto Rico 00985
р
Printed in U.S.A.
LSQTO344B
51200-0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement