Panasonic PT-HX40 PT-51HX40, PT-61HX40, PT-56HX40 projection TV Operating Instructions
Below you will find brief information for projection TV PT-HX40 PT-51HX40, projection TV PT-HX40 PT-61HX40, projection TV PT-HX40 PT-56HX40. The Panasonic projection TVs provide high-quality picture and sound with complete audio/video connections for your home theater system. This device features a two tuner Picture In Picture (PIP) feature for watching two live broadcasts or videos simultaneously.
PDF
Download
Document
Advertisement
Advertisement
0342-Cover.fm Page 1 Wednesday, February 7, 2001 11:29 AM TQB2AA0342 00407 IMPRESO EN EE.UU. ® Color Video Projection System Operating Instructions PT-51HX40 PT-61HX40 PT-56HX40 PT-51HX40 PT-61HX40 PT-56HX4 Instrucciones de Operación Sistema de proyección de vídeo a color TQB2AA0342 00407 PRINTED IN USA ® B0342E Production.fm Page 1 Wednesday, February 7, 2001 11:10 AM :$51,1* 7R PRYH VHW SXVK IURP OHIW VLGH RI VHW &DVWHUV RQ ULJKW VLGH GR QRW SLYRW LQ DOO GLUHFWLRQV 6HW FDQ WLS RYHU LI PRYHG IURP ULJKW VLGH ZLWK ULVN RI SHUVRQDO LQMXU\ $'9(57(1&,$ 3DUD PRYHU HO FRQMXQWR HPSXMH GHVGH HO ODGR L]TXLHUGR GHO PLVPR /RV URODQDV GH OD GHUHFKD QR VRQ SLYRWDQWHV HQ WRGDV ODV GLUHFFLRQHV (O FRQMXQWR VH SXHGH WXPEDU VL VH OR PXHYH GHVGH HO ODGR GHUHFKR FRUULHQGR DVt HO ULHVJR GH VXIULU GDxRV SHUVRQDOHV 0LVH HQ JDUGH /RUV GX GpSODFHPHQW GX WpOpYLVHXU OH SRXVHU VXU VRQ F{Wp JDXFKH /HV URXOHWWHV GX F{Wp GURLW QH SRXYDQW WRXUQHU GDQV WRXWHV OHV GLUHFWLRQV O·DSSDUHLO SRXUUDLW WRPEHU V·LO HVW SRXVVp GH FH F{Wp HW FDXVHU DLQVL GHV ULVTXHV GH EOHVVXUH Certain audio features of this product manufacture under a license from Desper Products, Inc. Spatializer® and the circle-in-square device and trademarks owned by Desper Products, Inc. Spatializer U.S. Patents are: 4,308,423; 4,355,203 and 5,412,731. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrow head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons. The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance. WARNING: To prevent fire or shock hazard, do not expose this appliance to rain or moisture. B0342E Production.fm Page 2 Wednesday, February 7, 2001 11:10 AM TABLE OF CONTENTS Table of Contents Congratulations ........................................................3 Customer Record .....................................................................3 Care and Cleaning ...................................................................3 Specifications ...........................................................................3 Installation.................................................................4 Television Location...................................................................4 Optional Cable Connections.....................................................4 AC Power Supply Cord ............................................................4 Cable / Antenna........................................................................4 Optional Equipment Connections.............................................5 VCR Connection.......................................................................5 Cable Box Connection..............................................................6 VCR and Cable Box Connection ..............................................7 Amplifier Connection (To Audio Amp) .....................................8 Program Out Connection (Prog.Out)........................................8 Dolby Center Channel Input Connection..................................9 Picture In Picture (PIP) Operation .........................10 Basic PIP Operation ..............................................................10 PIP Operation with a Cable Box............................................10 Digital TV - Set-Top (DTV-STB) or DVD Connection ..............................................................11 Roller Guide Menu™Navigation ............................12 Basic Navigation.....................................................................12 Remote Control Guide............................................................12 Roller Guide Feature Chart ....................................13 Special Features .....................................................16 Program Channels .................................................................16 Closed Captioning ..................................................................16 Closed Captioning Mode ........................................................16 Closed Caption on Mute.........................................................17 Convergence ..........................................................................17 Sleep Timer ............................................................................19 Timer 1 and 2 .........................................................................19 Picture ....................................................................................20 Audio ......................................................................................20 Channels - Favorites ..............................................................21 Channels - Caption.................................................................21 Lock .......................................................................................22 Troubleshooting Chart ...........................................23 Read these instructions completely before operating PTV. Contents are subject to change without notice or obligation. Copyright 2000 by Matsushita Electric Corporation of America. All rights reserved. Unauthorized copying and distribution is a violation of law. 2 B0342E Production.fm Page 3 Wednesday, February 7, 2001 11:10 AM CONGRATULATIONS Congratulations Your new Projection Television (PTV) features state-of-the-art technology for high quality picture and sound with complete audio/video connections for your home theater system. Your PTV is designed to give you many years of enjoyment. It was thoroughly tested and tuned at the factory for best performance. Customer Record The model and serial number of this product are located on the back of the PTV. You should note the model and serial number in the space provided and retain as a permanent record of your purchase. This will aid in identification in the event of theft or loss. Product registraton for U.S. customers is available at: www.prodreg.com/panasonic. Model Number Serial Number Care and Cleaning Projection Screen (Turn PTV Off) The projection screen is a high precision lens system which has a protective screen. The protective screen is fully washable with the following precautions: r Use a mild soap solution or window cleaner and a clean cloth. • DO NOT USE ABRASIVE CLEANERS. • Do not use laundry detergent or automatic dishwasher soap. • Do not use alcohol, ammonia, or petroleum based products. r Avoid excessive moisture and wipe dry. • Prevent solution from running into the receiver below. r Avoid bumping or scraping the screen. Cabinet and Remote Control r For cabinets and remote control, use a soft cloth dampened with water or a mild detergent solution. Avoid excessive moisture and wipe dry. r Do not use benzene, thinner or other petroleum based products. Specifications Power Source PT-51HX40 (3.6A) PT-56HX40 (3.6A) PT-61HX40 (3.6A) 120V AC, 60Hz Channel Capability - 181 VHF-12; UHF-56; Cable-125 4 Video Input Jacks 1Vp-p, 75 Ohm, Phono Jack Type 8 Audio Input Jacks 500mV RMS 47K Ohm Video Output Jack 1Vp-p, 75 Ohm, Phono Jack Type 2 Audio Output Jacks 0-2.0V RMS 4.7K Ohm Component Input (Y / PB / PR) 75 Ohm, Phono Jack Type 3 S-Video Input Jacks S-Video (Y-C) Connector Specifications are subject to change without notice or obligation. 3 B0342E Production.fm Page 4 Wednesday, February 7, 2001 11:10 AM INSTALLATION Installation Television Location This unit can be used as an entertainment center. Consult your dealer for available options. r Avoid excessive sunlight or bright lights, including reflections. r Keep away from excessive heat or moisture. Inadequate ventilation may cause internal component failure. r Fluorescent lighting may reduce remote control transmitting range. r Keep away from magnetic equipment, including motors, fans and external speakers. Optional Cable Connections Shielded audio and video cables should be used between components. For best results: r Use 75-ohm coaxial shielded cables. r Use appropriate input and output connectors, that match your component connectors. r Avoid long cables to minimize interference. AC Power Supply Cord CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. FOR SOME MODELS THAT ARE NON-POLARIZED, THE USE OF AN AC ADAPTOR CONNECTOR MAY BE NECESSARY. Polarized plug Non-Polarized plug Cable / Antenna For proper reception, either a cable or antenna connection is required. Cable Connection Connect the cable supplied by your local cable company. Note: A cable converter box may be required for proper reception. Check with your local cable company for compatibility requirements. Antenna Connections • • 75 Ohm VHF/UHF on back of PTV For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended. Connect home antenna to ANT1 connection on back of Incoming Cable from Home Antenna television. Select TV mode and ANT1 in the SET UP menu under Prog Chan. Cable Preset Cable Mode is preset at the factory. Antenna users must change to TV Mode and ANT 1 in the Set Up menu. 4 Incoming Cable from Cable Company B0342E Production.fm Page 5 Wednesday, February 7, 2001 11:10 AM INSTALLATION Optional Equipment Connections VCR Connection Follow this diagram when connecting your television to a VCR only. VCR TERMINALS ON BACK OF PTV S-VIDEO OUT COMPONENT VIDEO INPUT VIDEO OUT 1 CENTER CHANNEL INPUT 12Ω 50W (DIN) MAX 2 L AUDIO OUT AUDIO R ANT INPUT L R R-AUDIO-L PR PB VIDEO VIDEO S-VIDEO ANT OUTPUT Y Use either the S-Video or Video connection. INPUT 1 ANT 2 INPUT 2 SPLIT OUT CABLES NOT SUPPLIED Incoming Cable Note: ANT 1 INPUT 3 R L PROG . OUT TO AUDIO AMP The remote control must be programmed with supplied codes to operate the VCR. See Programming the Remote Control in the Remote Control Quick Reference Guide. Viewing a television program Procedure 1. 2. Select ANT1 in the SET UP menu under Prog Chan (Program Channels). Tune the television to the television program you want to view. Viewing a video Procedure r r Option A 1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels). 2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR. 3. Begin the video. Option B 1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels). 2. Tune the television to Channel 3 or 4, depending on your VCR. 3. Begin the video. Recording a television program Procedure r r Option A (Recording and viewing the same program) 1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels). 2. Tune the television to Channel 3 or 4, depending on your VCR. 3. Using the VCR, tune to the television program you want to record. 4. Begin recording. Option B (Recording one program while viewing another program) 1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels). 2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR. 3. Using the VCR, tune to the television program you want to record. 4. Begin recording. 5. Press the TV/VIDEO button on the remote control to switch back to TV mode. 6. Tune the television to the television program you want to view. 5 B0342E Production.fm Page 6 Wednesday, February 7, 2001 11:10 AM INSTALLATION Optional Equipment Connections (Cont.) Open the door on the PTV front panel to use the connections for your optional equipment (Palmcorder, VCR, or other video components). Select input 4 mode by pressing TV/VIDEO button. CONNECTIONS OF FRONT OF PTV INPUT 4 S -VIDEO VIDEO L-AUDIO-R Cable Box Connection Follow this diagram when connecting your television to a cable box only. TERMINALS ON BACK OF PTV Cable Box COMPONENT VIDEO INPUT 1 INPUT OUTPUT CENTER CHANNEL INPUT 12Ω 50W (DIN) MAX 2 L R AUDIO R-AUDIO-L PR PB Y VIDEO VIDEO S-VIDEO INPUT 1 ANT 2 INPUT 2 SPLIT OUT Incoming Cable from Cable Company ANT 1 INPUT 3 R L PROG . OUT TO AUDIO AMP Note: The remote control must be programmed with supplied codes to operate the cable box. See Programming the Remote Control in the Remote Control Quick Reference Guide. Viewing a premium (scrambled) cable channel Procedure 1. 2. 3. Note: 6 Select ANT2 in the SET UP menu under Prog Chan (Program Channels). Tune the television to Channel 3. Using the cable box, tune to the premium cable channel you want to view. To use special features such as Favorite Channels and Channel Captions (see Special Features section for more information), ANT1 must be selected in the SET UP menu under Prog Chan. B0342E Production.fm Page 7 Wednesday, February 7, 2001 11:10 AM INSTALLATION Optional Equipment Connections (Cont.) VCR and Cable Box Connection Follow this diagram when connecting your television to both a VCR and a cable box. VCR S-VIDEO OUT VIDEO OUT CABLES NOT SUPPLIED L TERMINALS ON BACK OF PTV AUDIO OUT R ANT INPUT ANT OUTPUT COMPONENT VIDEO INPUT 1 CENTER CHANNEL INPUT 12Ω 50W (DIN) MAX CABLE BOX L R AUDIO ANT OUTPUT R-AUDIO-L PR PB VIDEO VIDEO S-VIDEO 2 Use either the Y S-Video or Video connection. INPUT 1 ANT 2 ANT INPUT INPUT 2 SPLIT OUT Incoming Cable ANT 1 INPUT 3 R L PROG . OUT TO AUDIO AMP Note: The remote control must be programmed with supplied codes to operate the VCR and cable box. See Programming the Remote Control in the Remote Control Quick Reference Guide. Viewing a premium (scrambled) cable channel Procedure 1. 2. 3. Note: Select ANT2 in the SET UP menu under Prog Chan (Program Channels). Tune the television to Channel 3. Using the cable box, tune to the premium cable channel you want to view. To use special features such as Favorite Channels and Channel Captions (see Special Features section for more information), ANT1 must be selected in the SET UP menu under Prog Chan. Recording a premium (scrambled) cable channel Procedure 1. 2. 3. 4. 5. 6. Note: Select ANT2 in the SET UP menu under Prog Chan. Press the TV/VIDEO button on the remote control to select the video input ( VIDEO 1, VIDEO 2, etc.) connected to your VCR. Turn the VCR ON. Tune the VCR to Channel 3 or 4, depending on your VCR. Using your cable box, tune to the premium cable channel you want to record. Begin recording. To view a different channel while recording: • Select ANT1 in the SET UP menu under Prog Chan. • Press the TV/VIDEO button on the remote control to select TV mode. • Tune the television to a television program (except another premium cable channel). 7 B0342E Production.fm Page 8 Wednesday, February 7, 2001 11:10 AM INSTALLATION Optional Equipment Connections (Cont.) Amplifier Connection (TO AUDIO AMP) To listen through a separate stereo system, connect an external audio amplifier TO AUDIO AMP inputs on back of television. Note: TO AUDIO AMP terminals cannot be connected directly to external speakers. Audio Adjustments 1. 2. 3. 4. 5. 6. Select SPEAKERS ON located in the on screen AUDIO menu . Set amplifier volume to minimum. Adjust PTV volume to desired level. Adjust amplifier volume to match the PTV. Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO menu to control speakers from the PTV or select FIXED AUDIO OUT to control speakers from the external amplifier. Volume, mute, bass, treble and balance are now controlled from the PTV, if you select VARIABLE AUDIO OUT mode. Program Out Connection (PROG. OUT) To use the PTV audio and video with optional video equipment, use PROG. OUT and TO AUDIO AMP terminals on the back of the PTV. Procedure 1. 2. 3. Connect optional video equipment to PROG. OUT video and TO AUDIO AMP R/L Audio terminals. PROG OUT terminal display is the same as the on screen display. See optional equipment manual for further instructions for recording or monitoring. TERMINALS ON BACK OF PTV COMPONENT VIDEO INPUT 1 CENTER CHANNEL INPUT 12Ω 50W (DIN) MAX 2 L R AUDIO R-AUDIO-L PR PB Y VIDEO VIDEO S-VIDEO INPUT 1 ANT 2 INPUT 2 SPLIT OUT ANT 1 INPUT 3 R L PROG . OUT TO AUDIO AMP MONITOR VCR CABLES NOT SUPPLIED OR 8 B0342E Production.fm Page 9 Wednesday, February 7, 2001 11:10 AM INSTALLATION Dolby Center Channel Input Connection Your PTV can be configured to use the PTV speakers as center channel speakers in Dolby* surround sound transmission. Connect a Dolby surround amplifier to CENTER CHANNEL INPUT on the back of the PTV as shown. DOLBY CENTER MODE & FIXED AUDIO OUT must be selected in the AUDIO Roller Guide™** menu under SPEAKERS. TERMINALS ON BACK OF PTV COMPONENT VIDEO INPUT 1 CENTER CHANNEL INPUT 12Ω 50W (DIN) MAX 2 PR L R AUDIO R-AUDIO-L PB Y VIDEO VIDEO S-VIDEO INPUT 1 ANT 2 INPUT 2 SPLIT OUT ANT 1 CENTER CHANNEL INPUT (1) Push and hold down button. (2) Insert bare wire into terminal and release button. INPUT 3 R L PROG . OUT TO AUDIO AMP VCR Video Component Dolby Surround AMPLIFIER From Center Channel Output PTV Left Front Speaker PTV Speakers Center Channel Left Rear Surround Speaker Right Front Speaker Right Rear Surround Speaker *”Dolby” and “Pro-logic” are the trademarks of Dolby Laboratories Licensing Corporation. **U.S. Patent Pending 9 B0342E Production.fm Page 10 Wednesday, February 7, 2001 11:10 AM PICTURE IN PICTURE (PIP) OPERATION Picture In Picture (PIP) Operation This television includes a two tuner Picture In Picture (PIP) feature. This allows watching two (2) live broadcasts at the same time without or with an external video source (VCR). Basic PIP Operation Procedure Press the PIP button on the remote control to display the PIP frame onscreen. Note: 1. 2. The audio is for the Main Picture only. Choose channels for the PIP frame by pressing the remote control PIP CHANNEL up/ down buttons. Choose channels for the Main Picture by pressing the remote control CH up/down buttons or by using the numeric keypad. SWAP Button The SWAP button switches the PIP and Main Picture source. Press the RECALL button for onscreen PIP and Main Picture source status. PIP Operation with a Cable Box Procedure r To view premium (scrambled) cable channels through your cable box in the Main Picture: Note: 1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels). 2. 3. Tune television to Channel 3. Press the PIP button on the remote control to display the PIP frame onscreen. Note: 4. 5. 6. Note: 10 Use this procedure if you want to watch premium cable channels in the Main Picture while viewing a television program or video in the PIP frame. The audio is for the Main Picture only. Verify the cable box is ON. Choose channels for the Main Picture by tuning the cable box. Choose channels for the PIP frame by pressing the TV button on the remote control and using the PIP CHANNEL up/down buttons. Swap is not available when using the cable box to tune channels. If your cable box has a video output, it can be connected to the television to allow you to use all PIP functions. See the equipment manual for more information. (Tune the PIP to the video input connected to the cable box). B0342E Production.fm Page 11 Wednesday, February 7, 2001 11:10 AM DIGITAL TV - SET-TOP BOX (DTV-STB) OR DVD CONNECTION Digital TV - Set-Top Box (DTV-STB) or DVD Connection Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) or DVD to the back of your PTV. DTV TERMINALS ON BACK OF DTV-STB OR DVD R-AUDIO-L COMPONENT VIDEO INPUT 1 DIGITAL TV OUTPUT MAIN Y PB PR CENTER CHANNEL INPUT 12Ω 50W (DIN) MAX 2 VIDEO L R AUDIO R-AUDIO-L -VIDEO R-AUDIO-L S-VIDEO NTSC OUTPUT PR PB Y VIDEO VIDEO S-VIDEO INPUT 1 ANT 2 INPUT 2 SPLIT OUT ANT 1 INPUT 3 R L PROG . OUT TO AUDIO AMP DTV TERMINALS ON BACK OF PTV Note: There are three video inputs, Y, PB, and PR. Separate component color inputs provide luminance and color separation. Use the L (left) and R (right) audio inputs. 11 B0342E Production.fm Page 12 Wednesday, February 7, 2001 11:10 AM ROLLER GUIDE MENU NAVIGATION Roller Guide Menu Navigation Procedure 1. 2. 3. 4. 5. 6. 7. 8. 9. Note: Press the ACTION button in the middle of the large blue button on the Remote Control to display the Roller Guide Menu. Press the CH up/down to rotate the Roller Guide to the desired feature. Press the ACTION button to display main menus and submenus. Press the CH up/down buttons to highlight desired main menu feature. Press the VOL right button to enter submenus. Press the CH up/down buttons to highlight desired submenu feature. Press the VOL right/left button to select or adjust feature. Press the ACTION button twice to return to the Roller Guide Menu. To exit the Roller Guide Menu, press the VOL left button. Be careful to press ACTION in the middle of the button. If you do not press in the middle of the button, the (CH) channel or (VOL) volume keys may be activated. ROLLER GUIDE MENU SELECTIONS Remote ACTION / Navigation Button CH VOL ACTION VOL CH Remote Control Guide The Remote Control Quick Reference Guide is located within the package provided with this PTV. 12 B0342E Production.fm Page 13 Wednesday, February 7, 2001 11:10 AM ROLLER GUIDE FEATURE CHART Roller Guide Feature Chart MENU DESCRIPTION SET UP r PROG. CHAN (Program Channels) r r r r CC (Closed Captioning) r r OTHER ADJ. r MODE - Select Cable or TV. See Installation section in manual. ANTENNA - Select ANT 1 or ANT 2. AUTO PROGRAM - Automatically program channels having a signal into memory. MANUAL PROGRAM - Manually add or delete channels from memory. CC ON MUTE - Activate C1-C4 for Closed Captioning display when the remote MUTE button is pressed. CC MODE - Select T1-T4 or C1-C4 for Closed Captioning, program guides and other information. AUTO POWER ON - Select SET to power up the TV at the same time as the Cable Box or other components or select OFF. CONVERGENCE - Adjustment may be required when the PTV is moved because of the effects of the Earth’s magnetic field on the projection tubes. AUDIO r r AUDIO ADJ. (Adjustments) r r r OTHER ADJ. (Adjustments) r MODE - Select STEREO, SAP (Second Audio Program) or MONO. (Use MONO when stereo signal is weak.) BASS - Increase or decrease the bass response. TREBLE - Increase or decrease the treble response. BALANCE - Emphasize the left/right speaker volume. NORMAL - Reset BASS, TREBLE and BALANCE to factory default. AI SOUND - Automatically adjust volume to maintain a comfortable listening level. (AI sound is not available in VIDEO mode). 13 B0342E Production.fm Page 14 Wednesday, February 7, 2001 11:10 AM ROLLER GUIDE FEATURE CHART Roller Guide Feature Chart (Cont.) MENU SURROUND DESCRIPTION r SPATIALIZER® - Three dimensional surround sound with two speakers. r r ON - PTV speakers operate normally. OFF & VAO (Variable Audio Output) PTV speakers off - audio adjustable by PTV. OFF & FAO (Fixed Audio Output)PTV speakers off — audio adjustable only by the external amplifier. DOLBY CENTER MODE & FIXED AUDIO OUT - PTV speakers provide center speakers for Dolby sound transmission available on video or laser disc. (See Installation section in manual.) r SPEAKERS r TIMER r Set the time and the day of the week. (Time will display onscreen after turning on the television, pressing the RECALL button or changing channels). r Set timer to turn off PTV in 30, 60 or 90 minutes. Select NO to turn timer off. r Set one or both timers to automatically turn television on and off at selected times, on selected channels, and on selected days. (Clock must be set to use Timer features). CLOCK SET SLEEP TIMER 1 TIMER 2 PICTURE r r r VIDEO ADJ. (Adjustments) r r r 14 COLOR - Adjust desired color intensity. TINT - Adjust natural flesh tones. BRIGHTNESS - Adjust dark areas for crisp detail. PICTURE - Adjust white areas of picture. SHARPNESS - Adjust clarity of outline detail. NORMAL- Reset all picture adjustments to factory default settings. B0342E Production.fm Page 15 Wednesday, February 7, 2001 11:10 AM ROLLER GUIDE FEATURE CHART Roller Guide Feature Chart (Cont.) MENU DESCRIPTION r OTHER ADJ. (Adjustments) r r SCAN MODE - Picture adjustment when switching between video games and DTV, if needed. COLOR TEMP - Adjust white balance to COOL (blue), WARM (red) or NORMAL. COLOR MATRIX - Select HD or SD to automatically adjust color parameters for HD (high definition and SD (standard definition) transmissions. CHANNELS r CHANNEL SCAN - Select FAV (16 favorites) or ALL channels to scan channels using the up/down CH buttons. r PRESET CAPTION - Enter channel numbers for preset captions. MANUAL CAPTION - Enter channel numbers and captions manually. INPUT LABEL - Label video connections for onscreen display of optional equipment. FAVORITES CAPTION r r LOCK MODE r Lock All, Channels or Game with a secret code. HOW LONG? r Select the period of time (12, 24, 48 hours or ALWAYS) for your option to be locked. 15 B0342E Production.fm Page 16 Wednesday, February 7, 2001 11:10 AM SPECIAL FEATURES Special Features SET UP Prog Chan (Program Channels) In SET UP menu under PROG CHAN select: MODE to select TV (antenna) or CABLE mode depending on the signal source. ANTENNA to select either ANT1 or ANT2. r AUTO PROGRAM to automatically program all channels with a signal. MANUAL PROGRAM to manually add or delete channels. r r r PROG CHAN CC OTHER ADJ. MODE CABLE ANTENNA ANT1 AUTO PROGRAM MANUAL PROGRAM CC (Closed Captioning) This television contains a built-in decoder that displays CC (Closed Captioned) text across the screen (white or colored letters on black background). It allows the viewer to read the dialogue of a television program or other information. The program viewed must include Close Captioning for the feature to work. CC Mode r r r r 16 In SET UP Menu, select CC (Closed Caption). Select CC MODE. Select OFF, C1, C2, T1, T2, C3, C4, T3 or T4: • OFF - When Closed Caption is not desired. • C1 - For video related information to be displayed, up to 4 lines onscreen at a time. (It does not block relevant parts of the picture). Text may be in any language. • C2 to C4 - For other modes of video related information. • T1 - For program guide and other information to be displayed, when available. (Blocks a large portion of the picture on the television screen). • T2 to T4 - For other modes of information. (Blocks a large portion of the picture on the television screen). Press ACTION to return to submenu options, and exit menus. B0342E Production.fm Page 17 Wednesday, February 7, 2001 11:10 AM SPECIAL FEATURES Set Up (cont.) CC On Mute Activates the onscreen Closed Caption feature when the MUTE button on the remote control is pressed. Note: This feature only functions when the Closed Caption Mode is OFF. The program being viewed must be broadcast with Closed Captioning. (Refer to your local TV guide). r r r In SET UP Menu, select CC (Closed Caption). Select NO, C1, C2, C3, or C4. Recommended set up for Closed Caption when using the MUTE button: • • r r r CC CC ON MUTE: C1 MODE: OFF Press ACTION to return to submenu options, and exit menus. Press the MUTE button to activate the Closed Caption feature. Press the MUTE button again to deactivate the feature. PROG CHAN CC OTHER ADJ. CC ON MUTE NO CC MODE OFF Convergence In SET UP menu select CONVERGENCE under OTHER ADJ. only after moving the PTV to adjust for the effects of the earth’s magnetic field on the projection tubes.. PROG CHAN CC OTHER ADJ. AUTO POWER ON OFF CONVERGENCE Note: Convergence seldom needs adjusting except after moving the PTV. 17 B0342E Production.fm Page 18 Wednesday, February 7, 2001 11:10 AM SPECIAL FEATURES Convergence (cont.) Use the navigation buttons to align the horizontal and vertical green lines on screen with the outside reference marks, as shown below. Press the SWAP button to move the RED CONVERGENCE screen. CONVERGENCE GREEN NEXT : SWAP Reference Marks Use the navigation buttons to align the red cross with the white cross pattern at the center of the screen. Press the SWAP button to continue to the blue convergence adjustment screen and repeat. CONVERGENCE RED NEXT : SWAP Note: To prevent picture tube damage do not leave test pattern on for an extended period of time. Convergence Adjustment An adjusted cross pattern appears white with a minimum of color fringing. 18 B0342E Production.fm Page 19 Wednesday, February 7, 2001 11:10 AM SPECIAL FEATURES TIMER Sleep In TIMER menu, select SLEEP to turn PTV off in 30, 60 or 90 minutes. Select NO to turn off timer. CLOCK SET SLEEP TIMER 1 TIMER 2 HOW LONG? 30 Timer 1 and Timer 2 In TIMER menu, select one or both timers to turn the television on and off at selected times, on selected channels, and on selected days. Note: TIME must be entered in CLOCK SET to operate TIMER features. CLOCK SET SLEEP TIMER 1 TIMER 2 DAY SAT ON TIME _ _: _ _ OFF TIME _ _: _ _ ENTER CHANNEL _ _ _ SET TIME FIRST Turn Off After 90 Minutes The PTV automatically turns OFF after 90 minutes when turned on by the TIMER. If the OFF time is selected or if a key is pressed, the automatic OFF after 90 minutes will be cancelled. TIMER Activation The TIMER is active when the PTV is OFF or ON. The PTV will switch to the selected channel at the selected time set in the TIMER. 19 B0342E Production.fm Page 20 Wednesday, February 7, 2001 11:10 AM SPECIAL FEATURES PICTURE Other Adjustments In Picture menu under OTHER ADJ. select: r SCAN MODE to do picture adjustment when switching between video games and DTV, if needed. r COLOR TEMP to increase and decrease WARM (red) and COOL (blue) colors to suit personal preferences r COLOR MATRIX select HD or SD to automatically adjust color parameters for HD (high definition and SD (standard definition) transmissions. VIDEO ADJ. OTHER ADJ. SCAN MODE OFF COLOR TEMP NORMAL COLOR MATRIX HD AUDIO Dolby Center Mode & Fixed Audio Out In AUDIO menu under SPEAKERS, select DOLBY CENTER MODE & FIXED AUDIO OUT to operate PTV speakers as center speakers for Dolby sound transmission. (See Installation section in the manual.) AUDIO ADJ. OTHER ADJ. SURROUND SPEAKERS 20 DOLBY CENTER MODE & FIXED AUDIO OUT B0342E Production.fm Page 21 Wednesday, February 7, 2001 11:10 AM SPECIAL FEATURES CHANNELS Favorites In CHANNELS menu under FAVORITES select: r CHANNEL SCAN FAV to enter up to 16 favorite channels. r CHANNEL SCAN ALL to scan all channels when using the CH up/down buttons. FAVORITES CAPTION CHANNEL SCAN FAV ENTER CHANNEL 123 FAVORITE CHANNELS Caption In CHANNELS menu under CAPTION select: r PRESET CAPTION to enter channel numbers for popular PTV stations. r MANUAL CAPTION to enter numbers and captions manually. r INPUT LABEL to label video input connections for onscreen display. FAVORITES CAPTION PRESET CAPTION MANUAL CAPTION INPUT LABEL 21 B0342E Production.fm Page 22 Wednesday, February 7, 2001 11:10 AM SPECIAL FEATURES LOCK MODE To use LOCK options: r ENTER CODE FIRST - Use the numeric keypad to enter a four-digit secret code. After entering your secret code for the first time, the onscreen display will change to CHANGE CODE. Note: Use a code that is easy to remember or record it in a safe place. In MODE submenu select: r LOCK SET to choose: • • • • r r OFF - To turn lock function off. ALL - To lock all channels and video inputs. CHANNEL - To lock up to four channels of your choice. GAME - To lock channels 3, 4 and video inputs. BLOCK PROGRAMS - To use Block Programs Ratings. CHANGE CODE - Use numeric keypad to change your four-digit secret code. Note: If in CHANGE CODE you enter a different code from the one used previously, the new code becomes the controlling code. Press the ACTION button to return to submenu, then select HOW LONG to choose the period of time you want your option to be locked (12, 24, 48 hours or ALWAYS). Note: Be cautious when selecting ALWAYS. If ALWAYS is selected, and you forget your secret code, the television must be serviced by a qualified technician in order to clear the LOCK setup. Press the ACTION button to return to submenu, and to exit menus. LOCK SET MODE HOW LONG? Note: OFF BLOCK PROGRAMS: U.S. TV PROGRAMS STATUS OFF ENTER CODE FIRST - - - - If GAME, CHANNEL or ALL is selected, and if a blocked channel or video input is selected, the message PG (Parent Guard) displays in the upper right corner of the television screen Unlock LOCK SET by reentering the same four-digit secret code and selecting OFF. For more information about Block Programs, see the V-CHIP Parental Lock manual provided with the PTV package. 22 B0342E Production.fm Page 23 Wednesday, February 7, 2001 11:10 AM TROUBLESHOOTING CHART Troubleshooting Chart Before calling for service, determine the symptoms and follow suggested solutions. AUDIO VIDEO Solutions Adjust Antenna Location and Connection Noisy Audio Snowy Video Adjust Antenna Location and Connection Check Antenna Lead-in Wire Noisy Audio Multiple Image Move PTV from Electrical Appliances, Lights, Vehicles, and Medical Equipment Noisy Audio Interference Increase Volume Check Mute Check PTV SPEAKERS on/off No Audio Normal Video Change Channel Set PTV or Cable Mode Properly Check Antenna Cables Noisy Audio No Video with Snow ? No Audio No Video / No PIP Check Power Cord is Plugged into Active Outlet Adjust Brightness and Audio Controls Change Channel Check Cable Connections Program the Remote Control Again Check Second Video Source Operation Adjust Color Settings Change Channel Normal Audio No Color Check Audio Is Set To Stereo Or Mono, Not SAP Wrong Audio Normal Video Change CC (Closed Captioning) from Text Mode Normal Audio Black Box on Screen Replace Remote Control Batteries Normal Video Normal Audio Intermittent Remote Control Operation 23 B0342E Production.fm Page 24 Wednesday, February 7, 2001 11:10 AM NOTES Notes Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 www.panasonic.com (800) 222-4213 24 Panasonic de Mexico, S.A, de C.V. Amores No. 1120 Col. Del Valle C.P. 03100 México, D.F. Tel. (915 ó 015) 488-1000 Fax (915 ó 015) 575-6763, 575-6765 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico Inc. (“PSC”) Ave. 65 de Infantería, Km 9.5 San Gabriel Industrial Park Carolina, Puerto Rico 00985 Tel. (787) 750-4300 Fax (787) 768-2910 0342-Cover.fm Page 1 Wednesday, February 7, 2001 11:29 AM TQB2AA0342 00407 IMPRESO EN EE.UU. ® Color Video Projection System Operating Instructions PT-51HX40 PT-61HX40 PT-56HX40 PT-51HX40 PT-61HX40 PT-56HX40 Instrucciones de Operación Sistema de proyección de vídeo a color ® TQB2AA0342 00407 PRINTED IN USA B0342S Production.fm Page 1 Wednesday, February 7, 2001 11:11 AM :$51,1* 7R PRYH VHW SXVK IURP OHIW VLGH RI VHW &DVWHUV RQ ULJKW VLGH GR QRW SLYRW LQ DOO GLUHFWLRQV 6HW FDQ WLS RYHU LI PRYHG IURP ULJKW VLGH ZLWK ULVN RI SHUVRQDO LQMXU\ $'9(57(1&,$ 3DUD PRYHU HO FRQMXQWR HPSXMH GHVGH HO ODGR L]TXLHUGR GHO PLVPR /RV URODQDV GH OD GHUHFKD QR VRQ SLYRWDQWHV HQ WRGDV ODV GLUHFFLRQHV (O FRQMXQWR VH SXHGH WXPEDU VL VH OR PXHYH GHVGH HO ODGR GHUHFKR FRUULHQGR DVt HO ULHVJR GH VXIULU GDxRV SHUVRQDOHV 0LVH HQ JDUGH /RUV GX GpSODFHPHQW GX WpOpYLVHXU OH SRXVHU VXU VRQ F{Wp JDXFKH /HV URXOHWWHV GX F{Wp GURLW QH SRXYDQW WRXUQHU GDQV WRXWHV OHV GLUHFWLRQV O·DSSDUHLO SRXUUDLW WRPEHU V·LO HVW SRXVVp GH FH F{Wp HW FDXVHU DLQVL GHV ULVTXHV GH EOHVVXUH Ciertas funciones de audio de este producto son fabricadas bajo licencia de Desper Products, Inc. Spatializer® es una marca comercial propiedad de Desper Products, Inc. ADVERTENCIA RIESGO DE SACUDIDAS ELECTRICAS. NO ABRIR. ADVERTENCIA: A fin de reducir el riesgo de sacudidas eléctricas, no deberán quitarse ni la cubierta ni la tapa posterior. No hay en el interior pieza alguna que el usuario tenga que reparar. Todo servicio habrá de brindarlo personal de reparación capacitado. El propósito del relámpago con punta de flecha dentro de un triángulo es el de advertir al usuario de que existen piezas internas del producto que representan riesgo de que las personas reciban sacudidas eléctricas. ADVERTENCIA: El propósito del signo de exclamación dentro de un triángulo es el de advertir al usuario de que los documentos que acompañan al aparato incluyen importantes instrucciones de funcionamiento y reparación. Con el objeto de prevenir el riesgo de incendio o de sacudida eléctrica, este aparato no deberá verse expuesto a la lluvia ni a la humedad. B0342S Production.fm Page 2 Wednesday, February 7, 2001 11:11 AM INDICE Indice Felicidades ................................................................3 Registro del Usuario.................................................................3 Cuidado y Limpieza..................................................................3 Especificaciones.......................................................................3 Instalación .................................................................4 Ubicación de la Televisión........................................................4 Conexiones de Cable Opcional................................................4 Cable de Suministro de Corriente Alterna................................4 Conexión de Cable / Antena ....................................................4 Conexiones de Equipo Opcional ..............................................5 Conexión de la Videocasetera .................................................5 Conexión del Decodificador de Cable ......................................6 Conexiones del Decodificador de Cable y Videocasetera .......7 Conexión del Amplificador de Sonido (TO AUDIO AMP).........8 Conexión de Salida del Programa (PROG. OUT) ....................8 Conexión de Entrada del Canal Central Dolby.........................9 Operación de la Imagen en la Imagen (PIP) ........10 Operación Básica de PIP .......................................................10 Operación de PIP con un Decodificador de Cable.................10 Conexión del Decodificador de Televisión Digital (DTV-STB) o DVD ....................................11 Menú de la Guía Giratoria MR Navegación .............12 Guía del Control Remoto........................................................12 Tabla de Características de la Guía Giratoria ......13 Funciones Especiales ............................................16 Programacíon de Canales......................................................16 CC Subtítulos.......................................................................16 CC Modo..............................................................................16 CC En Mudo ........................................................................17 Convergencia .........................................................................18 Cronómetro - Apagado...........................................................19 Cronómetro 1 y Cronómetro 2................................................19 Imagen ...................................................................................20 Audio ......................................................................................20 Canales - Favoritos ................................................................21 Canales - Títulos ...................................................................21 Bloqueo ..................................................................................22 Cuadro de Localización de Fallas .........................23 Lea estas instrucciones completamente antes de operar la T.V. El contenido está sujeto a cambios sin previo aviso u obligación. Derechos reservados 2000 por Matsushita Electric Corporation of America. Todos los derechos reservados. La copia y distribución sin autorización es violación de la ley. 2 B0342S Production.fm Page 3 Wednesday, February 7, 2001 11:11 AM FELICIDADES Felicidades Su nueva Televisión de Proyección (PTV) se caracteriza por utilzar lo último en tecnología en calidad de imagen y sonido, cuenta con conexiones completas de Audio y Video para su Sistema de Teatro en Casa. Su PTV esta diseñada para brindarle muchos años de entretenimiento, fué sintonizada y comprobada en su totalidad en la fábrica para su mejor desempeño. Registro del Usuario El modelo y el número de serie de este producto se localizan en la parte posterior de este PTV. Deberá anotar el modelo y el número de serie en los espacios que se proveen a continuación y consérvelos permanentemente como comprobación de su compra. Esto le ayudará a identificarlo en caso de robo ó pérdida. Los consumidores en los Estados Unidos de América pueden registrar su producto en la siguiente dirección electrónica: Número de Modelo Número de Serie Cuidado y Limpieza Pantalla de Proyección (Apague el PTV) La pantalla de proyección es un sistema de lentes de alta precisión el cual contiene una pantalla protectora. La pantalla protectora es completamente lavable, con las siguientes precauciones: r Use una solución de jabón o limpiador de vidrios y un paño limpio. • NO UTILICE LIMPIADORES ABRASIVOS. • No use detergente para lavar ropa ó jabón para lavaplatos automático. • No use alcohol, amonia, o productos derivados del petróleo. r Evite el exceso de humedad y frote hasta secar. • Prevenga que la solución se derrame al interior del receptor. r Evite golpear o rayar la pantalla. Gabinete y Control Remoto r r Para gabinetes y control remoto use un paño humedecido con agua o una solución detergente suave. Evite el exceso de humedad y frote hasta secar. No use benceno, diluyentes u otros productos a base de petróleo. Especificaciones Fuente de Potencia PT-51HX40 (3,6A) PT-56HX40 (3,6A) PT-61HX40 (3,6A) 120Vca, 60Hz Capacidad de Canales - 181 VHF-12; UHF-56; Cable-124 4 Terminales de Entrada de Video 1Vp-p, 75 Ohmios,Terminal tipo fonográfico 8 Terminales de Entrada de Audio 500mV rms 47Kilo Ohmios Terminales de Salida de Video 1Vp-p, 75 Ohmios,Terminal tipo fonográfico 2 Terminales de Salida de Audio 0-2.0V rms 4.7Kilo Ohmios Componente Entrada de Vídeo 75 Ohmios,Terminal tipo fonográfico 3 Terminal de Entrada S-Video Conectores S-Video (Y-C) Las especificacines están sujetas a cambios sin previo aviso ni obligación alguna. 3 B0342S Production.fm Page 4 Wednesday, February 7, 2001 11:11 AM INSTALACIÓN Instalación Ubicación de la Televisión Esta unidad puede ser utilizada como un centro de entretenimiento. Consulte a su distribuidor para obtener opciones disponibles. Evite el exceso de luz del sol u otras luces brillantes, incluyendo reflejos. Mantenga alejada la unidad del exceso de calor o humedad. Ventilación inadecuada puede causar fallas en componentes internos. Iluminación fluorecente puede reducir de transmisión del Control Remoto. Evite el equipo magnético, incluyendo motores, ventiladores ó bocinas externas. r r r r Conexiones de Cable Opcional Cables blindados de Audio y Video deben usarse entre los componentes. Para mejores resultados: Use cable coaxial blindado de 75-ohmios. Use los conectores de entrada y salida apropiados, iguales a los de su componente. Evite el uso de cables largos para minimizar interferencia. r r r Cable de Suministro de Corriente Alterna PRECAUCION: PARA PREVENIR UNA DESCARGA ELECTRICA, BUSQUE LA HOJA ANCHA DEL ENCHUFE E INSERTELA POR COMPLETO EN LA RENDIJA ANCHA CORRESPONDIENTE DE LA TOMA DE CORRIENTE ALTERNA. NO USE Enchufe polarizado ESTE ENCHUFE CON UN RECEPTACULO U OTRA TOMA DE CORRIENTE SALVO QUE LA HOJA SE PUEDA INSERTAR POR COMPLETO PARA PREVENIR LA EXPOSICION DE LA HOJA. PARA ALGUNOS MODELOS NO POLARIZADOS, PUEDE REQUERIRSE EL USO DE UN CONECTOR DE ADAPTADOR DE Enchufe no polarizado CORRIENTE ALTERNA. Conexión de Cable / Antena Para una recepción adecuada se requiere una conexion de cable o de antena. Cable de entrada de la Compañía de Cable Conexión del Cable Conecte el cable suministrado por su compañía local de cable. Nota: Se puede requerir de un decodificador de cable para una recepción adecuada. Verifique con su compañía de cable local sobre los requisitos de compatibilidad. Conexión de Antena • • Para una recepción adecuada de canales VHF/UHF se requiere de una antena externa. Para la mejor recepción, se recomienda una antena en el exterior. Conecte el cable de la antena a la conexión ANT1 en la parte posterior de la televisión. Seleccione la modalidad de TV y ANT1 en el menú de SET UP bajo PROG CNLS. Cable Predispuesto La Modalidad de Cable está predispuesta de fábrica. Usuarios de Antena deberán cambiar a la modalidad de PTV y seleccionar ANT1 en el Menú de Setup bajo PROG CNLS. 4 75 Ohmios VHF/UHF en la parte posterior de la PTV Cable de Entrada de una Antena de Casa B0342S Production.fm Page 5 Wednesday, February 7, 2001 11:11 AM INSTALACIÓN Conexiones de Equipo Opcional Conexión de la Videocasetera Siga este diagrama cuando conecte su televisión solamente a una videocasetera. TERMINALES EN LA PARTE POSTERIOR DE LA PTV Videocasetera S-VIDEO OUT COMPONENT VIDEO INPUT 1 VIDEO OUT CENTER CHANNEL INPUT 12Ω 50W (DIN) MAX 2 AUDIO OUT AUDIO R ANT INPUT L R L R-AUDIO-L PR PB VIDEO VIDEO S-VIDEO ANT OUTPUT Y Use la conexión S-VIDEO o la conexión VIDEO. INPUT 1 ANT 2 INPUT 2 SPLIT OUT ANT 1 INPUT 3 R L PROG . OUT TO AUDIO AMP Cable de entrada CABLES NO INCLUIDOS Nota: El control remoto debe ser programado con los códigos que se incluyen para operar la videocasetera. Vea Programación del Control Remoto en la Guía de Referencia Rápida para el Control Remoto. Viendo un programa de televisión Procedimiento 1. Seleccione ANT1 en el menú de SET UP (Ajuste) bajo PROG CNLS (Programación de canales). 2. Sintonize la televisión al programa de televisión que desea ver. Viendo un vídeo Procedimiento r Opción A 1. Seleccione ANT1 en el menú de SET UP bajo PROG CNLS. 2. Presione el botón de TV/VIDEO en el control remoto para seleccionar la entrada de vídeo (VIDEO 1, VIDEO 2, etc.) que está conectada a su videocasetera. 3. Comience el vídeo. r Opción B 1. Seleccione ANT2 en el menú de SET UP bajo PROG CNLS. 2. Sintonize su televisión al canal 3 ó 4, dependiendo de su videocasetera. 3. Comience el vídeo. Grabando un programa de televisión Procedimiento r Opción A (Grabando y viendo el mismo programa) 1. Seleccione ANT2 en el menú de SET UP bajo PROG CNLS. 2. Sintonize su televisión al canal 3 ó 4, dependiendo de su videocasetera. 3. Usando la videocasetera, sintonize el programa de televisión que desea grabar. 4. Comience a grabar. r Opción B (Grabando un programa mientras se ve otro programa) 1. Seleccione ANT1 en el menú de SET UP bajo PROG CNLS. 2. Presione el botón de TV/VIDEO en el control remoto para seleccionar la entrada de vídeo ( VIDEO 1, VIDEO 2, etc.) que está conectada a su videocasetera. 3. Usando la videocasetera, sintonize el programa de televisión que desea grabar. 4. Comience a grabar. 5. Presione el botón de TV/VIDEO en el control remoto para regresar a la modalidad de PTV. 6. Sintonize su televisión al programa de televisión que desea ver. 5 B0342S Production.fm Page 6 Wednesday, February 7, 2001 11:11 AM INSTALACIÓN Conexiones de Equipo Opcional (cont.) Abra la puerta del panel frontal de la PTV para usar estas conexiones para su equipo opcional (videocámara, VCR u otros componentes de vídeo). Seleccione el modo de entrada video 4 presionanado el botón TV/VIDEO. CONEXIONES EN EL FRENTE DE LA TELEVISION INPUT 4 S -VIDEO VIDEO L-AUDIO-R Conexión del Decodificador de Cable Siga este diagrama cuando conecte su televisión solamente a un decodificador de cable. DECODIFICADOR DE CABLE TERMINALES EN LA PARTE POSTERIOR DE LA PTV COMPONENT VIDEO INPUT 1 INPUT OUTPUT CENTER CHANNEL INPUT 12Ω 50W (DIN) MAX 2 L R AUDIO R-AUDIO-L PR PB Y VIDEO VIDEO S-VIDEO INPUT 1 ANT 2 INPUT 2 SPLIT OUT ANT 1 Cable de entrada de la Compañía del Cable INPUT 3 R L PROG . OUT TO AUDIO AMP Nota: El control remoto debe ser programado con los códigos que se incluyen para operar el decodificador de cable. Vea Programación del Control Remoto en la Guía de Referencia Rápida para el Control Remoto. Viendo un Canal de Cable Premium (codificado) Procedimiento 1. 2. 3. Seleccione ANT2 en el menú de SET UP (Ajuste) bajo PROG CNLS (Programación de Canales). Sintonize la televisión al canal 3. Usando el decodificador de cable, sintonize el canal de cable premium que desea ver. Nota: Para usar funciones especiales tales como Canales Favoritos y Títulos de Canal (vea la sección de Funciones Especiales para más información), ANT1 debe estar seleccionada en el menú de SET UP bajo PROG CNLS. 6 B0342S Production.fm Page 7 Wednesday, February 7, 2001 11:11 AM INSTALACIÓN Conexiones de Equipo Opcional (Cont.) Conexiones del Decodificador de Cable y Videocastera Siga este diagrama cuando conecte su televisión tanto a una videocasetera como a un decodificador de cable. Videocasetera TERMINALES EN LA PARTE POSTERIOR DE LA PTV S-VIDEO OUT VIDEO OUT L AUDIO OUT R ANT INPUT ANT OUTPUT COMPONENT VIDEO INPUT 1 DECODIFICADOR DE CABLE CENTER CHANNEL INPUT 12Ω 50W (DIN) MAX 2 L R AUDIO ANT OUTPUT R-AUDIO-L PR PB Y VIDEO VIDEO S-VIDEO INPUT 1 ANT 2 ANT INPUT CABLES NO INCLUIDOS INPUT 2 SPLIT OUT Cable de entrada ANT 1 INPUT 3 R L PROG . OUT TO AUDIO AMP Nota: El control remoto debe ser programado con los códigos que se incluyen para operar la videocasetera y decodificador de cable (caja de cable). Vea Programación del Control Remoto en la Guía de Referencia Rápida para el Control Remoto. Viendo un canal de cable premium (codificado) Procedimiento 1. Seleccione ANT2 en el menú de SET UP (Ajuste) bajo PROG CNLS (Programación de canales). 2. Sintonize la televisión al canal 3. 3. Usando el decodificador de cable, sintonize al canal de cable premium que desea ver. Nota: Para usar la funciones especiales tales como Canales Favoritos y Títulos de canal (vea la sección de Funciones Especiales para más información), ANT1 debe estar seleccionada en el menú de SET UP bajo PROG CNLS. Grabando un canal de cable premium (codificado) Procedimiento 1. 2. Seleccione ANT2 en el menú de SET UP bajo PROG CNLS. Presione el botón TV/VIDEO en el control remoto para seleccionar la entrada de vídeo (VIDEO 1, VIDEO 2, etc) que está conectada con su videocasetera. 3. Encienda la videocasetera. 4. Sintonize la videocasetera al canal 3 o 4, dependiendo de su televisión. 5. Usando el decodificador de cable, sintonize al canal de cable premium que desea grabar. 6. Comienze a grabar. Nota: Para ver un canal diferente mientras graba: • • • Seleccione ANT1 en el menú de SET UP bajo PROG CNLS. Presione el botón TV/VIDEO en el control remoto para seleccionar la modalidad de televisión. Sintonize la televisión a un programa de televisión (excepto otro canal de cable premium). 7 B0342S Production.fm Page 8 Wednesday, February 7, 2001 11:11 AM INSTALACIÓN Conexiones de Equipo Opcional (Cont.) Conexión del Amplificador de Sonido (TO AUDIO AMP) Conecte a la entrada de audio de un amplificador externo para escuchar el sonido en sistema estéreo. Nota: Las terminales TO AUDIO AMP no pueden ser usadas directamente para bocinas externas. Ajustes de Sonido (Audio) 1. 2. 3. 4. 5. 6. Seleccione ALTAVOCES SI en el menú de SONIDO (AUDIO). Ajuste el volumen del AMP (amplificador) al mínimo. Ajuste el volumen de la Televisión al nivel deseado. Ajuste el volumen del AMP hasta igualar el de la Televisión. Seleccione OFF & VAO (parlantes apagados y salida variable de audio) en el menú AUDIO para controlar Altavoces o bocinos de la PTV o bien seleccione FAO (salida fija de audio) para controlar Altavoces o bocinos del amplificador externo. El Volumen, el silencio, los bajos, los altos y el balance ahora son controlados por medio de la Televisión. Conexión de Salida del Programa (PROG. OUT) Para visualizar en la Televisión el Video y el Audio con equipo opcional de vídeo conéctese a las terminales PROG.OUT en la parte posterior de la Televisión. Procedimiento 1. 2. 3. Conecte el equipo opcional de video a las terminales PROG OUT y TO AUDIO AMP R/L. El desplegado de terminal PROG. OUT es el mismo que el desplegado en pantalla. Véase el manual de equipo opcional para instrucciones acerca del grabado y monitoreo. TERMINALES EN LA PARTE POSTERIOR DE LA PTV COMPONENT VIDEO INPUT 1 CENTER CHANNEL INPUT 12Ω 50W (DIN) MAX 2 L R AUDIO R-AUDIO-L PR PB Y VIDEO VIDEO S-VIDEO INPUT 1 ANT 2 INPUT 2 SPLIT OUT ANT 1 INPUT 3 R L PROG . OUT TO AUDIO AMP Monitor Videocasetera CABLES NO INCLUIDOS o 8 B0342S Production.fm Page 9 Wednesday, February 7, 2001 11:11 AM INSTALACIÓN Conexión de Entrada del Canal Central Dolby Su Televisión puede ser configurada para usar las bocinas de la Televisión como bocinas del Canal Central en la transmisión del Sonido Envolvente Dolby*. Conecte un Amplificador Envolvente Dolby a la entrada del canal central (CENTER CHANNEL INPUT) en la parte posterior de la Televisión como se muestra. En el menú de AUDIO (SONIDO) de la Guía Giratoria MR * escoja en ALTAVOCES la Modalidad de DOLBY CENTRAL Y SALIDA DE AUDIO FIJA. * Patente en Trámite E.U.A. TERMINALES EN LA PARTE POSTERIOR DE LA TELEVISION COMPONENT VIDEO INPUT 1 CENTER CHANNEL INPUT 12Ω 50W (DIN) MAX 2 PR L R AUDIO R-AUDIO-L PB Y VIDEO VIDEO S-VIDEO INPUT 1 ANT 2 INPUT 2 SPLIT OUT ANT 1 Entrada del Canal Central (1) Presione el botón y manténgalo. (2) Inserte el cable expuesto en la Terminal y libere el botón. INPUT 3 R L PROG . OUT TO AUDIO AMP Videocasetera Video Componentes AMPLIFICADOR Dolby Envolvente Salidas del Canal Central PTV Altavoz Izquierdo Delantero Altavoz Trasero Izquierdo Envolvente Altavoces de la PTV Canal Altavoz Derecho Delantero Altavoz Trasero Derecho Envolvente *”Dolby” y “Pro-logic” son las marcas registradas de Dolby Laboratories Licensing Corporation. 9 B0342S Production.fm Page 10 Wednesday, February 7, 2001 11:11 AM OPERACIÓN DE IMAGEN EN IMAGEN (PIP) Operación de Imagen en Imagen (PIP) Esta televisión incluye la característica de Imagen en Imagen con un sintonizador dual. Esto le permite ver dos (2) transmisiones en vivo al mismo tiempo con o sin una fuente de vídeo externa tal como videocasetera, decodificador de cable, etc. Operación Básica de PIP Procedimiento Presione el botón PIP en el control remoto para desplegar el recuadro PIP en pantalla. Nota: 1. 2. El Audio es sólo de la Imagen Principal. Escoja canales para el recuadro PIP presionando el botón PIP CHANNEL (Canales de PIP) arriba/abajo en el control remoto. Escoja canales para la Imagen Principal presionando los botones CH (Canal) arriba/ abajo o usando el teclado numérico. Botón SWAP El botón SWAP (CAMBIO) intercambia la fuente de las imágenes PIP y la Principal. Presione el botón RECALL (LLAMADA) para obtener el estado de la fuente de PIP e Imagen Principal en pantalla. Operación de PIP con un Decodificador de Cable Procedimiento r Para ver canales de cable premium a través del decodificador de cable en la Imagen Principal: Nota: 1. 2. 3. Use este procedimiento si desea ver canales de cable premium en la Imagen Principal mientras ve un programa de televisión o vídeo en el recuadro de PIP. Seleccione ANT2 en el menú de SET UP (Ajuste) bajo PROG CNLS (Programación de canales). Sintonize la televisión al canal 3. Presione el botón PIP en el control remoto para desplegar el recuadro de PIP en pantalla. Nota: El Audio es sólo de la Imagen Principal. Verifique que su decodificador de cable esté Encendido. Escoja canales para la Imagen Principal sintonizando su decodificador de cable. Escoja canales para el recuadro de PIP presionando el botón TV en el control remoto y usando los botones PIP CHANNEL arriba/abajo. Nota: La función de SWAP no está disponible cuando se usa el decodificador de cable para sintonizar canales. Si su decodificador de cable tiene salida de vídeo puede ser conectada a la televisión, para permitirle usar todas las funciones de PIP. (Sintonize el PIP a la entrada de vídeo conectada a su decodificador de cable). 4. 5. 6. 10 B0342S Production.fm Page 11 Wednesday, February 7, 2001 11:11 AM CONEXIÓN DEL DECODIFICADOR DE TELEVISIÓN DIGITAL (DTV-STB) Ó DVD Conexión del Decodificador de Televisión Digital (DTV-STB) ó DVD Utilice este diagrama para conectar el decodificador de Televisión Digital Panasonic (DTV-STB) ó DVD a su Televisor, Entradas para Televisión Digital en la parte posterior del Televisor COMPONENT VIDEO INPUT VIDEO AUDIO CENTER CHANNEL INPUT 12Ω 50W (DIN) MAX R L PR PB Y L-AUDIO-R 1 DIGITAL PTV OUTPUT MAIN Y PB PR VIDEO S-VIDEO INPUT 1 VIDEO ANT 2 INPUT 2 R-AUDIO-L -VIDEO S-VIDEO SPLIT OUT INPUT 3 NTSC OUTPUT ANT 1 R L PROG . OUT TO AUDIO AMP CABLES NO INCLUIDOS Entradas para Televisión Digital en la parte posterior del Decodificador de Televisión Digital (DTV-STB) ó DVD. Nota: El televisor tiene dos grupos de entradas de video compuesto, cada grupo tiene tres entradas: Y, PB y PR. Los entradas separadas para las señales compuestas de color, proveen una mejor separación de luminancia y color. Utilice las entradas de audio compuesto 1 ó 2; Izquierda (L) y Derecha (R) para conectar las salidas de audio de su Decodificador de Televisión Digital Panasonic (DTV-STB). 11 B0342S Production.fm Page 12 Wednesday, February 7, 2001 11:11 AM MENU DE LA GUÍA GIRATORIA NAVEGACIÓN Menu de la Guía Giratoria Navegación Procedimiento 1. 2. 3. 4. 5. 6. 7. 8. 9. Nota: Pulse el botón ACTION (Acción) en medio del botón grande azul que se encuentra en el control remoto para visualizar el Menú de la Guía Giratoria. Pulse el botón CH arriba/abajo para girar la Menú de el Guía Giratoria hasta llegar a la función deseada. Pulse el botón ACTION para visualizar los menús principales y submenú. Pulse los botones arriba/abajo de CH para resaltar la función deseada del menú principal. Pulse el botón de la derecha del VOL para entrar los submenús. Pulse los botones arriba/abajo de CH para resaltar la función de los submenú. Pulse el botón de la derecha o izquierda del VOL para seleccionar o ajustar una función. Pulse dos veces el botón ACTION para regresar al Menú de la Guía Giratoria. Para salir del Menú de la Guía Giratoria, pulse el botón izquierdo VOL. Tenga cuidado cuando presione el botón ACTION. Si no se presiona justo al centro del botón, las teclas de canal (CH) y volumen (VOL) serán activadas. Menú de la Guía Giratoria ACTION (Acción) Remota / Boton de Navegación CH VOL ACTION VOL CH Guía del Control Remoto La Guía de Referencia Rápida del Control Remoto se incluye con en el empaque de esta televisión. 12 B0342S Production.fm Page 13 Wednesday, February 7, 2001 11:11 AM TABLA DE MENUS DE LA GUÍA GIRATORIA Tabla de Menus de la Guía Giratoria MENU DESCRIPCIÓN AJUSTE r PROG CNLS (Programación de Canales) r r r r CC (Closed Captioned - Subtítulos) r r OTROS AJ (Otros Ajustes) r MODO - Seleccione Cable o Televisión. Vea la sección de Instalación en su manual. ANTENA - Seleccione ANT 1 o ANT 2. PROGRAM AUTO - Programación automática de los canales con señal en la memoria. PROGRAM MANUAL - Manualmente incluye o anula canales en memoria. CC EN MUDO - Seleccione C1, hasta C4 para visualizar Subtítulos en pantalla cuando el botón MUTE (MUDO) del control remoto es presionado. MODALIDAD CC - Seleccione T1 hasta T4 ó C1 hasta C4 para información transmitida, si está disponible, en un cuadro grande negro. AUTOENCEN - Seleccione SET (AJUSTE) para encender la televisión al mismo tiempo que la Caja del Cable u otros componentes, ó seleccione OFF. CONVERGENCIA - Ajustes pueden ser requeridos cuando su PTV es movida, por el efecto de los campos magnéticos de la tierra en los tubos de proyección. SONIDO r r AJ AUDIO (Ajustes de Sonido) r r r OTROS AJ (Otros Ajustes) r MODO - Seleccione ESTEREO, SAP (Programa Secundario De Sonido) ó MONO (use MONO cuando la señal de estéreo es débil). BAJOS - Aumenta o disminuye la respuesta de los bajos. ALTOS - Aumenta o disminuye la respuesta de los altos. BALANCE - Enfatiza el volumen del altavoz DERECHO / IZQUIERDO. NORMAL - Reajusta BAJOS, ALTOS y BALANCE a los niveles prefijados de fábrica. AI SONIDO Automáticamente ajusta el volumen, para mantener confortable el nivel a escuchar. 13 B0342S Production.fm Page 14 Wednesday, February 7, 2001 11:11 AM TABLA DE MENUS DE LA GUÍA GIRATORIA Tabla de Menus de la Guía Giratoria MENU SONIDO ENVOLVENTE DESCRIPCIÓN r r r ALTAVOCES r r SPATIALIZER® - Sonido ambiental tridimensional con dos altavoces. SI - Altavoces de la PTV funcionan normalmente APAGADAS Y SALIDA DE AUDIO VARIABLE Altavoces de la PTV están apagados, el sonido va de acuerdo al de la Televisíon. APAGADAS SALIDA DE AUDIO FIJA Altavoces de la PTV están apagados, el sonido se ajusta sólo con amplificador externo. MODALIDAD DOLBY CENTRAL Y SALIDA DE AUDIO FIJA - Altavoces de centro proporcionan transmisión de sonido Dolby para discos de video ó láser (veáse la instalación en el manual). CRONOMETRO r AJUSTE DE RELOJ APAGADO r (Apagado Automático) CRONOM 1 r CRONOM 2 (Cronómetros) Cuando se ajusta, TIME (HORA) aparecerá en pantalla después de presionar el botón de POWER (ENC/APAG), el botón RECALL (LLAMADA), o al cambiar canales . Programe la PTV para que automáticamentese apague en 30, 60, ó 90 minutos. Seleccione NO para apagar el cronómetro. Programe dos cronómetros para que enciendan y apaguen automáticamente a la Televisión en la hora, canal y días seleccionados (El reloj debe de estar ajustado a tiempo para poder hacer uso del cronómetro). IMAGEN AJ. IMAGEN. (Ajustes) 14 r r r r r r COLOR - Ajusta la intensidad del color deseada. TINTE - Ajusta los tonos naturales de la piel. BRILLO - Ajusta las áreas oscuras para detalles más nítidos. CONTRASTE - Ajusta las áreas blancas de la imagen. NITIDEZ- Ajusta para dar mejor claridad a los detalles de la silueta. NORMAL- Reajusta todas las modificaciones de la imagen a los predispuestos de fábrica. B0342S Production.fm Page 15 Wednesday, February 7, 2001 11:11 AM TABLA DE MENUS DE LA GUÍA GIRATORIA Tabla de Menus de la Guía Giratoria MENU DESCRIPCIÓN r OTROS AJ. (Otros Ajustes) r r MODO DE BARRIDO - Para seleccionar el modo de TV o GAME y si es necesario realizar adjustes a la imagen cuando cambia del modo para video juegos al modo normal de TV. TEMPERATURA DEL COLOR - Ajusta la preferencia de color AZUL, ROJO, o NORMAL. MATRIZ DE COLOR - Seleccione HD or SD para ajuste automático de los parámetros de color para transmiciones de HD (alta definición) y SD (definición estándar). CANALES FAVORITOS TITULOS r r r r EXPLORA CAN - Seleccione FAV (16 favoritos) o TODOS para explorar canales, usando los botones CH arriba/abajo. PREFIJADO - Asigne los números de canal para los títulos/siglas prefijados. MANUAL - Introdusca los números de los canales y sus títulos/siglas manualmente. PONGA TITULO (SIGLAS) - Ponga título a las entradas de video desplegadas en pantalla y conexiones opcionales de equipo. BLOQUEO MODO r TIEMPO r Active el bloqueo en Todos, Canales o Juego con un código secreto. Seleccione la duración del bloqueo. (12, 24, 48 horas o SIEMPRE). 15 B0342S Production.fm Page 16 Wednesday, February 7, 2001 11:11 AM FUNCIONES ESPECIALES Funciones Especiales Ajuste PROG CNLS (Programación de Canales) En el menú de SETUP bajo PROG CNLS seleccione: r r r r MODE para seleccionar la modalidad de PTV (antena) o CABLE dependiendo de la fuente de la señal ANTENA para seleccionar ANT 1 ó ANT 2. PROGRAMA AUTO para programar automáticamente todos los canales con señal. PROGRAMA MANUAL para manualmente incluir o borrar canales. / PROG CHAN CC OTHER ADJ. MODE CABLE ANTENNA ANT1 AUTO PROGRAM MANUAL PROGRAM CC (Subtítulos) Esta televisión contiene un decodificador integrado que despliega subtítulos (texto en letras blancas o de colores sobre un fondo negro) en pantalla. Permite al usario leer el diálogo de un programa de televisión u otra información. El programa visto debe incluir la modalidad de subtítulos para que esta función opere. Modo CC r r r r 16 En el menú de SET UP, (Ajuste), seleccione CC (Subtítulos). Seleccione MODO CC . Seleccione NO, C1, C2, T1, T2, C3, C4, T3 ó T4: • NO - Cuando no se desea la modalidad de subtítulos. • C1 - Para que la información relacionada con el vídeo sea desplegada en hasta 4 líneas en pantalla a la vez. (No bloquea partes relevantes de la imagen). El texto puede ser en cualquier idioma. • C2 a C4 - Otras modalidades de información relacionada con el vídeo. • T1 - Para que la guía de la programación o cualquier otra información sea desplegada en pantalla, cuando sea disponible. (Bloquea una gran porción de la imagen en la pantalla de la televisión). • T2 a T4 - Para otras modalidades de información. (Bloquea una gran porción de la imagen en la pantalla de la televisión). Presione ACTION para regresar a las opciones de los submenús y para salir de los menús. B0342S Production.fm Page 17 Wednesday, February 7, 2001 11:11 AM FUNCIONES ESPECIALES Ajuste (cont.) CC En Mudo Activa la modalidad de subtítulos en pantalla cuando el botón MUTE (MUDO) en el control remoto es presionado. Para desactivar presione nuevamente el botón MUTE (MUDO). Nota: Esta función opera solamente cuando la modalidad de subtítulos está apagada (NO). El programa visto debe ser transmitido con la modalidad de subtítulos. (Consulte su guía de televisión local). r r r r En el menú de SET UP, seleccione CC . Seleccione CC EN MUDO. Seleccione NO, C1, C2, C3 ó C4. Ajuste recomendado para la modalidad de subtítulos cuando se usa el botón MUTE (Mudo): • r r r CC EN MUDO: C1 • MODO CC : NO Presione ACTION para regresar a las opciones de los submenús, y salir de los menús. Presione el botón MUTE (MUDO) para activar la característica de Subtítulos. Presione el botón MUTE (MUDO) nuevamente para desactivar la característica. PROG CHAN CC OTHER ADJ. CC ON MUTE NO CC MODE OFF r Convergencia En el menú de SET UP, (Ajuste) seleccione CONVERGENCIA únicamente después de mover el PTV para ajustar los efectos de campo magnético de la tierra en los tubos de proyección. .. PROG CHAN CC OTHER ADJ. AUTO POWER ON OFF CONVERGENCE Nota: La necesidad de ajustar CONVERGENCIA es ocasional, sólo cuando se mueve el PTV. 17 B0342S Production.fm Page 18 Wednesday, February 7, 2001 11:11 AM FUNCIONES ESPECIALES Ajuste (cont.) Convergencia Use los botones de navegación para alinear las líneas verdes horizontales y verticales en la pantalla con las marcas de referencia de afuera, como se muestra abajo. Presione el botón de SWAP para moverse hacia la pantalla RED CONVERGENCE (Convergencia Roja) . CONVERGENCE GREEN NEXT: SWAP Marcas de Referencia Use los botones de navegación para alinear la cruz roja con el patrón de la cruz blanca al centro de la pantalla. Presione SWAP para continuar con el ajuste en la pantalla de la convergencia AZUL y repítalo . CONVERGENCE RED NEXT : SWAP Nota: PARA PREVENIR DAÑO AL TUBO DE LA IMAGEN, NO DEJE ENCENDIDO EL PATRON DE PRUEBA POR UN PERIODO DE TIEMPO PROLONGADO. Convergencia Un patrón cruzado aparecerá en blanco con un mínimo de borde de color cuando se termine de ajustar. 18 B0342S Production.fm Page 19 Wednesday, February 7, 2001 11:11 AM FUNCIONES ESPECIALES CRONOMETRO Apagado En el menú de TIMER, seleccione APAGADO para poder apagar la Televisión en 30, 60 ó 90 minutos. Seleccione NO para desactivar el CRONOMETRO. CLOCK SET SLEEP TIMER 1 TIMER 2 HOW LONG? 30 CRONOM 1 y CRONOM 2 En el menú de TIMER seleccione dos cronómetros, CRONOM 1 y CRONOM 2, para encender o apagar la Televisión a la hora seleccionada de un canal seleccionado, en los días seleccionados. Nota: La HORA debe anotarse en el menú de RELOJ para que las funciones del CRONOMETRO funcionen. CONVERGENCE CLOCK SET SLEEP TIMER 1 TIMER 2 DAY SAT ON TIME _ _: _ _ OFF TIME _ _: _ _ ENTER CHANNEL _ _ _ SET TIME FIRST Apagado después de 90 minutos La Televisión se apaga automáticamente después de 90 minutos cuando se encendió con el CRONÓMETRO. Si se selecciona APAGAR o si se presiona una tecla, el apagado automático de 90 minutos se cancela. Activación del CRONÓMETRO El CRONOMETRO está activo cuando la Televisión está apagada o encendida. La Televisión cambiará al canal seleccionado a la hora seleccionada según se anotó en el CRONOMETRO. 19 B0342S Production.fm Page 20 Wednesday, February 7, 2001 11:11 AM FUNCIONES ESPECIALES IMAGEN Otros Ajustes r r r MODO DE BARRIDO para seleccionar el modo de TV o GAME y si es necesario realizar ajustes a la imagen cuando cambia del modo para video juegos al modo normal de TV. TEMPERATURA DEL COLOR para aumentar o disminuir el rojo y el azul para acomodarse a las preferencias personales MATRIZ DE COLOR - Seleccione HD or SD para ajuste automático de los parámetros de color para transmiciones de HD (alta definición) y SD (definición estándar). VIDEO ADJ. OTHER ADJ. SCAN MODE OFF COLOR TEMP NORMAL COLOR MATRIX HD AUDIO Modalidad Dolby Central y Salida Fija de Audio En el menú de AUDIO en ALTAVOCES seleccione DOLBY CENTRAL Y SALIDA FIJA para poder hacer operar los ALTAVOCES de la Televisión como altavoces centrales para transmisión de sonido DOLBY (vea la sección de instalación en el manual). AUDIO ADJ. OTHER ADJ. SURROUND SPEAKERS 20 DOLBY CENTER MODE & FIXED AUDIO OUT B0342S Production.fm Page 21 Wednesday, February 7, 2001 11:11 AM FUNCIONES ESPECIALES CANALES Favoritos En el menú de CHANNELS (Canales) bajo FAVORITOS seleccione: r EXPLORA CAN FAV para introducir hasta 15 canales favoritos. r TODOS para explorar todos los canales cuando se usan los botones CH (Canal) arriba/ abajo. FAVORITES CAPTION CHANNEL SCAN FAV ENTER CHANNEL 123 FAVORITE CHANNELS Título En el menú de CHANNELS bajo TITULO seleccione: r PREFIJADO para asignar el número de canal para las estaciones populares de televisión prefijadas. r MANUAL para introducir los números y títulos manualmente. r PONGA TITULO para clasificar las conexiones de entrada de vídeo que se visualizan en la pantalla. FAVORITES CAPTION PRESET CAPTION MANUAL CAPTION INPUT LABEL 21 B0342S Production.fm Page 22 Wednesday, February 7, 2001 11:11 AM FUNCIONES ESPECIALES BLOQUEO MODO Para usar las opciones de BLOQUEO: r ELIJA CODIGO - Use el teclado numérico para introducir un código secreto de cuatro dígitos. Después de introducir su código por primera vez, el mensaje en pantalla cambia a CAMBIAR CODIGO. Nota: Use un código que sea fácil de recordar y escríbalo en un lugar seguro. En el submenú de MODO seleccione: r BLOQUEO para seleccionar: r r l l l l NO - Para apagar la función de bloqueo. TODOS- Para bloquear todos los canales y entradas de vídeo. CANAL - Para bloquear hasta cuatro canales de su elección. JUEGO - Para bloquear los canales 3, 4 y las entradas de vídeo. PROGRAMAS - Para usar clasificaciones en programas y vídeos. CAMBIAR CODIGO - Para cambiar su código secreto de cuatro dígitos. Nota: Si en la opción de CAMBIAR CÓDIGO se introduce un código diferente al usado previamente, el código nuevo se convierte en el código controlador. Presione el botón ACTION (ACCION) para regresar al submenú, seleccione TIEMPO para seleccionar la duración del bloqueo (12, 24, 48 horas o SIEMPRE). Nota: Sea cuidadoso al seleccionar SIEMPRE. Si siempre está seleccionado, y usted olvida su código secreto la televisión deberá ser atendida por un técnico calificado para limpiar el ajuste del bloqueo. Presione el botón ACTION (ACCION) para regresar a los submenús, y salir de los menús. LOCK SET MODE HOW LONG? Nota: OFF BLOCK PROGRAMS: U.S. TV PROGRAMS STATUS OFF ENTER CODE FIRST - - - - Si JUEGO, CANAL o TODO está seleccionado, y si una de las entradas de vídeo o de los canales bloqueados es seleccionado, el mensaje PG (Protección de los Padres) se mostrará en la esquina superior derecha de la pantalla de la televisión. Desactive BLOQUEO al introducir nuevamente su código secreto de cuatro dígitos y seleccionando BLOQUEO NO. Para más información acerca de programas vea el manual V-CHIP Guía de los Padres incluido en el paquete de la televisión. 22 B0342S Production.fm Page 23 Wednesday, February 7, 2001 11:11 AM CUADRO DE LOCALIZACIÓN DE FALLAS Cuadro de Localización de Fallas Antes de solicitar servicio, establezca los síntomas y lleve a cabo las siguientes posibles soluciones. SONIDO IMAGEN Soluciones Ajuste la Ubicación y / o Conexión de la Antena Sonido Ruidoso Imagen Moteada Ajuste la Ubicación y la Conexión de la Antena Verifique el Cable de Entrada de la Antena Sonido Ruidoso Imagen Múltiple Aleje la PTV de los Aparatos Electrodomésticos, Luces, Vehículos y Equipo Médico Sonido Ruidoso Interferencia Aumente el Volumen Revise Mute (MUDO) Revise en el Menú de Audio: ALTAVOCES SI Sin Sonido Imagen Normal Cambie el Canal Ajuste apropiadamente la modalidad de PTV o del Cable Verifique los Cables de la Antena Sonido Ruidoso Sin Imagen ? Sin Sonido Sin Imagen/sin PIP Verifique que el Cable de Corriente este Enchufado a una toma de Corriente Activa Ajuste los Controles de Brillo y Audio Cambie el Canal Verifique las Conexiones del Cable Programe otra vez el Control Remoto Verifique la Operación de la Segunda Fuente de Video Ajuste el Color Cambie el Canal Sonido Normal Sin Color Verifique en el menú de AUDIO que el Ajuste se encuentre en Estéreo o Mono, no en SPA Sonido Erróneo Imagen Normal Cambie CC (Subtítulos) de la Modalidad de Texto Sonido Normal Caja Negra en Pantalla Reemplace las Pilas del Control Remoto Imagen Normal Sonido Normal Operación Intermitente del Control Remoto 23 B0342S Production.fm Page 24 Wednesday, February 7, 2001 11:11 AM Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 www.panasonic.com (800) 222-4213 24 Panasonic de Mexico, S.A, de C.V. Amores No. 1120 Col. Del Valle C.P. 03100 México, D.F. Tel. (915 ó 015) 488-1000 Fax (915 ó 015) 575-6763, 575-6765 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico Inc. (“PSC”) Ave. 65 de Infantería, Km 9.5 San Gabriel Industrial Park Carolina, Puerto Rico 00985 Tel. (787) 750-4300 Fax (787) 768-2910 ">

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Picture In Picture (PIP)
- Closed Captioning
- Convergence Adjustment
- Sleep Timer
- Timer 1 and 2
- Dolby Center Channel Input
- Audio Output
- Cable Box Connectivity
- VCR Connectivity
- Parental Controls (Lock)
Frequently asked questions
Connect the VCR to the TV using either the S-Video or Video connection and audio connection, depending on your VCR's capabilities. You can also connect the VCR to the TV using the ANT 2 input and selecting Channel 3 or 4 on the VCR.
Press the PIP button on the remote control to activate the PIP feature. The audio is for the Main Picture only. You can then choose channels for the PIP frame by pressing the PIP CHANNEL up/down buttons and channels for the Main Picture by pressing the CH up/down buttons or using the numeric keypad.
First, set the time and day of the week using the CLOCK SET option. Then, select TIMER 1 or TIMER 2 to set the times, channels, and days you want the TV to automatically turn on and off. The TIMER is active when the PTV is OFF or ON.
Use the LOCK feature to lock all channels, specific channels, or channels 3, 4 and video inputs. You'll need to enter a four-digit secret code to access the LOCK settings.
Select the CC MODE from the SET UP menu to choose the type of closed captioning you want to display. You can also activate the Closed Caption feature by pressing the MUTE button on the remote control.
Use the AUDIO menu to adjust the bass, treble, balance, and sound mode settings. You can also select the SPEAKERS option to use the TV's internal speakers or connect an external audio amplifier.