PHILIPS TV User guide

Below you will find brief information for TV. This document is a quick use and setup guide for your new TV, covering basic connections, remote control operation, and how to use the installation features. It will help you to set up your TV, program channels, and adjust the picture and sound settings to your liking.

PDF Download
Document
Philips TV User Guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Basic Television Connections
  • Remote Control Operation
  • Language Control
  • Tuner Mode Control
  • Auto Program
  • Channel Edit
  • Channel Name (Label)
  • AutoChron™ Feature (Clock)
  • Picture-In-Picture (PIP)
  • Surround Sound

Frequently asked questions

Connect the cable TV cable to the ANTENNA/CABLE plug on the TV. If you have a cable converter box, connect the OUT(put) plug from the converter to the 75Ω (ohm) plug on the TV.

Push the round end of the adapter (or antenna) onto the 75Ω (ohm) plug on the back of the TV. If the round end of the antenna wire is threaded, screw it down finger tight.

Press the MENU button on the remote control to show the onscreen menu. Press the CURSOR DOWN button repeatedly until the AUTO PROGRAM control is highlighted. Press the CURSOR RIGHT button to start the Auto Program scanning of channels.

Point the remote control toward the remote sensor window on the TV when operating the TV with the remote.

Press the MENU button on the remote control to show the onscreen menu. Press the CURSOR DOWN button until the AutoChron control is highlighted. Press the CURSOR RIGHT button to start the AutoChron™ feature. Then just follow the onscreen instructions to set the clock.
ALP:
Preparing document for printing…
0%