MODEL 63200 SERIES Programmable DC Electronic Load Key Features :

MODEL 63200 SERIES Programmable DC Electronic Load Key Features :
Programmable
DC Electronic Load
MODEL 63200 SERIES
Key Features :
■ Power Rating :
2600W, 5200W, 6500W, 10400W,
14500W, 15600W
■ Voltage range : 0 ~ 80V / 0 ~ 500V
■Current range : Up to 1000A
■CC, CR, CV, CP load modes
■ Master/Slave paralleling control mode,
allow synchronous load control under
static and dynamic loading mode
(Up to 93.6kW)
■ Dynamic loading : Up to 20kHz
■ Only need 1V to draw rated current
■ Programmable slew rate, up to 41A/µs
■ Measurement : Voltage / Current /
Power / Resistance
PROGRAMMABLE DC electronic load
MODEL 63200 SERIES
The Chroma Electronic Loads 63200 series
are designed to test DC power sources, power
electronic devices, automative battery and
components testing. The high power ratings,
parallel and synchronization capabilities make
them the ideal tool for testing high power UUT's
such as SMR's, UPS's, batteries, and fuel cells.
and Master / Slave control capability, the
63200 series electronic loads allow users to
parallel and synchronize more than one load
together using an internal or external loading
control signal. This feature provides unlimited
load simulation and the possibility of power
expansion.
The 63200 series offers 10 different models
with power ranges from 2600 watts to 15600
watts, currents from 50A to 1000A and up
to a 500V input voltage. The 4 load modes
provide different load simulations for various
applications. The CC/CR modes are designed
to test constant voltage power supplies. CV
mode is used to test battery chargers and
current sources, and CP mode is ideal for
battery testing by simulating the real discharge
curve.
The 63200 series also provides the necessary
measurement functions and short circuit
simulation that extend the test capability for
even the most demanding engineering tests
and ATE applications.
The 63200 series can draw its rated current
under very low voltage (1V typical) even
under the highest specified slew rate. This
unique feature guarantees the best loading
performance to a low voltage power supply.
Chroma 63200 series loads incorporate built in
fan speed control to minimize the audio noise.
The self-diagnosis routine and the protection
against OC, OP, OT and alarm indicating OV,
reverse polarity to ensure the best quality and
reliability.
With the unique external waveform simulation
With the LCD display and rotary knob, the
63200 electronic loads offer versatile front
panel operations. Users are able to control the
63200 family remotely via GPIB, RS-232C or
APG (Analog Programming) interface.
RS-232C
GPIB
■ Large LED / LCD display
■ External loading waveform simulation
■ Short circuit simulation and short
circuit current measurement
■Full protection : OC, OP, OT protection
and OV, reverse alarm
■Versatile remote controller
■GPIB & RS-232C interfaces
■Surge load capability
■Battery discharge timer
1. Application specific load simulation
Chroma electronic loads 63200 series
provide constant current, constant
resistance, constant voltage and
constant power modes.
V
V
V
V
The CC and CR mode load simulation
I
I
I
I
is helpful to test whether the output
Constant current
Constant resistance
Constant voltage
Constant power
voltage of the UUT remains stable or
regulated under different load conditions. For battery chargers, CV mode may help to change the output voltage of a charger and therefore can
test if the battery charger has the correct charging current corresponding to its own output, or more precisely, the battery voltage. If the UUT is
a battery, the electronic load is able to simulate the behavior of the device that uses the battery. For many of the battery discharge applications,
power consumption patterns need to analyzed. The constant power or CP mode is ideal for these applications.
2. Low voltage operating characteristics
For low voltage/high current applications, the 63200 series is available
with a low voltage, which provides ultra low voltage operation and in
many cases can compensate for large voltage loss in the input wiring.
The 63200 series loads use a current close loop design, and connects
all power MOSFET devices in parallel to insure high accuracy load
control with minimal drift (less than 0.15% of the current setting). The
MOSFET technology keeps the input impedance to a minimum and
enables the load to draw very high current even at very low voltages.
For example, the model 63209 is capable of drawing 1000A at only 1V
input.
Model 63209(15600W) Input Characteristics
3. Measurements
The Chroma 63200 series have a built in the 15-bit precision A/D converter, thus can achieve 0.05%F.S., 0.1%F.S. and 0.3%F.S. accuracy
for voltage, current and power measurements respectively. They can be displayed simultaneously on three big LED readouts for the user's
convenience. In additional to the standard measurements, the 63200 series also provides voltage and current monitor outputs, which are useful
when the user needs to monitor the voltage and current waveform via a scope.
4. Dynamic loading and control
Modern electronic devices operate at very high speeds ;
therefore ,it is important for an electronic load to perform well
during the transient and dynamic testing. To satisfy these testing
applications, the 63200 loads offer outstanding high speed,
programmable dynamic load simulation and control capabilities.
The figure below shows the programmable parameters of the
63200 load modules. The programmable slew rate makes
the simulation of transient load changes demanded by the
requirement of real life application possible. The internal waveform generator of 63200 is capable of producing a maximum slew rate of 25A/µs
(63208), and dynamic cycling up to 20kHz. Its' dedicated remote load sense and control circuitry guarantee the minimum waveform distortion
during continuous load changes.
5. Master / Slave parallel control
When higher power is required, it is common to parallel two
electronic loads together to draw higher current. The 63200 series
high power loads have smart Master / Slave control mode. When
the loads are set to Master / Slave mode, users can program
the loading (CC mode only) on master unit. The loading current
values of the slave units will be calculated and downloaded by
master unit automatically. In short, unlike traditional designs,
users may consider several load units that work under Master / Slave mode as a single load unit.
6. External loading waveform simulation
The 63200 series electronic loads can be controlled
by an external analog control signal, which is
generated by any kind of signals or an arbitrary
waveform generator. Thus, it is capable of simulating
any loading waveform observed in the field within the
load specifications.
Arbitrary Waveform Generator
7. Short circuit simulation
Chroma's 63200 series electronic loads can also simulate a short circuit condition. The load can short a DC power source or any power supplies
that have a built in current limit function, and measure their short circuit currents so that users can verify if the UUT current limit is functional.
8. SURGE LOAD CAPABILITY
Chroma's 63200 Series DC Loads provide a unique surge load
simulation capability which allows users to overdrive the loads
up to 2.7 times their rated power for short periods. This feature
is ideal when the average power required by the UUT is low
compared to short-term peak power demands. Plasma Display
Panel (PDPs) testing is one of the typical applications, others
include battery 3C discharge, breaker & fuse over rating (300%
to 1000%) tests, car engine startup simulation and DC motor
startup simulation.
The amount of surge loading available using the 63200 loads
is related to the initial loading conditions. Figures 1 and 2 show
the relationship of the initial state (Load_Low under Dynamic
mode) and the maximum acceptable overdrive power. Under
this operation, the load will display an Over Power Protection
Alarm (OPP) and will disable the load current if the user
violates the maximum surge load capability showed in the
figures.
Example 1: STATIC LOADING
The Model 63201 can be overdriven to approximately 5200W (200% of its rated
continuous power rating) for 6.0 ms seconds when the starting power is 650W (25%
of its rated power). This is represented by DOT on the blue curve in Figure 1.
Note 1 :
The Initial state under Static Mode should last at least 1 second.
Note 2 :
This surge load capability will be regulated by the temperature de-rating
characteristics. (Refer to Note 1 in Specifications)
Note 3 :
Examples below assume the use of the Model 63201 load with a
continuous rating of 2600W/300A/1-80VDC
9. Timer Function for Battery
Discharge Testing
Example 2: DYNAMIC LOADING
The Model 63201 is capable of a zero - to- 6500W (250%) pulse at a duty cycle of 5%.
This is represented by the DOT on the purple curve in Figure 2.
The 63200 Loads include a unique timing & measurement
function allowing for precision time settings and measurements
in the range of 1s to 99999s. This feature allows users to set a
final voltage & timeout value for battery discharge testing and
similar applications.
For example, Figure 3 shows that the 63200's internal timer
can be initiated automatically when the battery voltage falls
below a preset value. The timer will continue counting until the
second preset voltage value is reached.
APPLICATIONS
1. Power supply testing
Power supplies have played a critical role in electrical and electronic devices. They have diversified into several different configurations for
different applications. For example, AC/AC power supplies are used for UPS and AVR, AC/DC power supplies are used for PC power supplies,
and DC/AC power supplies are used for inverters that transfer battery power to AC for home appliances. Lastly, DC/DC converters are widely
used in battery powered devices such as cellular phones and laptop computers. With four different load modes, Chroma 63200 series electronic
loads are capable of testing many different DC output power supplies directly or via a rectifier. They can also be used to test the AC output power
supplies.
CC & CR Mode
A / D Power supply
D / D Converter
Rectifier
UPS/AVR
CV Mode
Battery charger
2. Electronic & Electrical devices testing
Almost all modern electronic equipment have a built in power supply.
Therefore, a DC electronic load is an important instrument for these
devices during the R/D and Q/A phases. For example, A/D, D/D and
D/A stages are normally integrated in a UPS. The Chroma 63200
electronic loads are helpful in testing the internal A/D and D/D boards
of UPS's.
3. Battery testing
For most applications, power consumption patterns are constant power. Therefore, the CP mode of the 63200 series electronic loads is ideal
to use as a discharge load for battery testing.
I
Discharge by CC mode
V
I
Discharge by CR mode
V
I
Discharge by CP mode
V
4. System integration
Chroma 63200 series electronic loads provide GPIB, RS-232C and RS-485 PC controllable interfaces. The external waveform simulation and
voltage / current monitoring capability make Chroma 63200 family ideal for automatic system integration.
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
Model: 63203, 63204
10
11
12
13
14
15
16
17
1. Power Switch
2. LED Display:
Voltage read back.
3. LED Display:
Current/ ohm read back.
4. LED Display:
Power read back.
5. LCD Display:
For setting and editing.
6. Rotary knob:
To adjust the loading and parameter setting.
7. Numeric key:
For data setting.
8. Function key:
To select load mode, control mode, and define the
reading specification.
9. System key:
For system config and data store, recall.
10. Load terminal
11. Voltage sense terminal
12. RS-485 connector
13. GPIB connector
14. RS-232C connector
15. Voltage monitor output:
Analog output which indicates the voltage waveform.
16. Current monitor output:
Analog output which indicates the current waveform.
17. External V reference:
External programming voltage input.
SPECIFICATIONS
Model
power*1
Current
Voltage
63201
260W
0~30A
Min. Operating voltage
0.5V @ 15A
1V @ 30A
0~80V
Constant Current mode
Range
0~30A
Resolution
7.5mA
Accuracy
0.1%+0.1%F.S.
Constant Resistance Mode
Range
0.005~20Ω
260W
0~5A
0.5V @ 150A
1V @ 300A
1.25V @ 2.5A
2.5V @ 5A
0~300A
75mA
0.2%+0.1%F.S.
63203
2600W
0~50A
520W
0~60A
1.25V @ 25A
2.5V @ 50A
0.5V @ 30A
1V @ 60A
0~5A
1.25mA
0.1%+0.1%F.S.
0~50A
12.5mA
0.2%+0.1%F.S.
0~60A
15mA
0.1%+0.1%F.S.
0~600A
150mA
0.2%+0.1%F.S.
0.125~500Ω
0~500V
5200W
0~600A
0~80V
0.5V @ 300A
1V @ 600A
0.25~1000Ω
0.25~1000Ω
10~40000Ω
0.0025~10Ω
52mS
1.04mS
1.2mS
28.8µS
104mS
2.1mS
0.104S+0.35%
0.9S+0.1%
0.0023S+0.35%
0.04S+0.1%
0.208S+0.35%*4
1.2S+0.1%
0.0023S+0.35%
57.56µS+0.35%
0.208S+0.35%
0.0042S+0.35%
0~16V
4mV
0~80V
20mV
Resolution*6
Accuracy*2
63202
2600W
0~300A
Accuracy*3
0.104S+0.35%
0.0021S+0.35%
(Vin>7V)
Constant Voltage mode
Range
0~16V
0~80V
Resolution
4mV
20mV
Accuracy
0.05%+0.1%F.S.
Constant Power mode
Range
0.6~260W
6~2600W
Resolution
7.5mW
75mW
Accuracy
0.5%+0.5%F.S.
Dynamic mode
Timing
T1&T2
0.025~10ms
1ms~30s
Resolution
1µs
1ms
Accuracy
1µs+100ppm
1ms+100ppm
Slew rate
5mA~1.25A/µs
50mA~12.5A/µs
Resolution
5mA/µs
50mA/µs
Accuracy
Min. Rise Time
24µs (typical)
Current
Range
0~30A
0~300A
Resolution
7.5mA
75mA
Accuracy
0.4%F.S.
Measurement
Voltage Read Back
Range
0~16V
0~80V
Resolution
0.5mV
2.4mV
Accuracy
0.05%+0.05%F.S.
Current Read Back
Range
0~30A
0~300A
Resolution
0.9mV
8.5mV
Accuracy
0.1%+0.1%F.S.
Power Read Back
Range
0~260W
0~2600W
Accuracy*5
0.3%+0.3%F.S.
General
Short Circuit
current
30A
300A
Dimension (H x W x D) 177 x 440 x 589 mm / 6.9 x 17.3 x 23.2 inch
Weight
30 kg / 66.13 lbs
Safety & EMC
CE
0~125V
0~500V
31mV
125mV
0.05%+0.1%F.S.
0.625~260W
6.25~2600W
3.125mW
31.25mW
0.5%+0.5%F.S.
0.025~10ms
1µs
1µs+100ppm
0.8mA~0.2A/µs
0.8mA/µs
1ms~30s
1ms
1ms+100ppm
8mA~2A/µs
8mA/µs
1.2~520W
12~5200W
22.5mW
225mW
0.5%+0.5%F.S.
0.025~10ms
1µs
1µs+100ppm
10mA~2.5A/µs
10mA/µs
24µs (typical)
0~5A
1.25mA
0.05%+0.1%F.S.
1ms~30s
1ms
1ms+100ppm
100mA~25A/µs
100mA/µs
24µs (typical)
0~50A
12.5mA
0.4%F.S.
0~60A
15mA
0~600A
150mA
0.4%F.S.
0~125V
0~500V
3.5mV
13.7mV
0.05%+0.05%F.S.
0~16V
0~80V
0.5mV
2.4mV
0.05%+0.05%F.S.
0~5A
0.2mV
0~60A
1.7mV
0.1%+0.1%F.S.
0~50A
1.4mV
0.1%+0.1%F.S.
0~600A
17 mV
0~260W
0~2600W
0.3%+0.3%F.S.
0~520W
0~5200W
0.3%+0.3%F.S.
5A
50A
177 x 440 x 589 mm / 6.9 x 17.3 x 23.2 inch
30 kg / 66.13 lbs
CE
60A
600A
353 x 440 x 589 mm / 6.9 x 17.3 x 23.2 inch
62 kg / 136.68 lbs
CE
All specifications are subject to change without notice. Please visit our website for the most up to date specifications.
Selection Guide :
Model
Voltage
80V
500V
600V
Power
2600W
5200W
6500W
10400W
14500W
15600W
63201
63202
--
63203
63204
63204*8
63205
---
63206/63207
---
-63210
--
63208/63209
---
Model 63208 / 63209 / 63210
Model
63201 / 63202
Model 63205
Model 63206 / 63207
Model 63203 / 63204
SPECIFICATIONS
Model
power*1
Current
Voltage
63204*8
520W
0~10A
1.25V @ 5A
2.5V @ 10A
Min. Operating
voltage
0~500V
63205
5200W
0~100A
650W
0~18A
1.25V @ 50A
2.5V @ 100A
0.5V @ 9A
1V @ 18A
Constant Current mode
Range
0~10A
0~100A
Resolution
2.5mA
25mA
Accuracy
0.1%+0.1%F.S.
0.2%+0.1%F.S.
Constant Resistance Mode
Range
0.125~500Ω
5~20000Ω
Resolution*6
2.3mS
57.56µS
Accuracy*2
0.0046S+0.35%
0.08S+0.1%
Accuracy*3
0.0046S+0.35%
115.51µS+0.35%
(Vin>7V)
Constant Voltage mode
0~125V
0~500V
Range
31mV
125mV
Resolution
0.05%+0.1%F.S.
Accuracy
Constant Power mode
1.25~520W
12.5~5200W
Range
6.25mW
62.5mW
Resolution
0.5%+0.5%F.S.
Accuracy
Dynamic mode
Timing
0.025~10ms
1ms~30s
T1&T2
1µs
1ms
Resolution
1µs+100ppm
1ms+100ppm
Accuracy
1.6mA~0.4A/µs
16mA~4A/µs
Slew rate
1.6mA/µs
16mA/µs
Resolution
Accuracy
24µs (typical)
Min. Rise Time
Current
0~10A
0~100A
Range
2.5mA
25mA
Resolution
0.4%F.S.
Accuracy
Measurement
Voltage Read Back
0~125V
0~500V
Range
3.5mV
13.7mV
Resolution
0.05%+0.05%F.S.
Accuracy
Current Read Back
0~10A
0~100A
Range
0.3mA
2.7mA
Resolution
0.1%+0.1%F.S.
Accuracy
Power Read Back
0~520W
0~5200W
Range
0.3%+0.3%F.S.
Accuracy*5
General
Short Circuit
10A
100A
current
Dimension (H x w x D) 353 x 440 x 589 mm / 13.9 x 17.3 x 23.2 inch
62 kg / 136.68 lbs
weight
CE
Safety & EMC
63206
6500W
0~180A
1040W
0~60A
0.5V @ 90A
1V @ 180A
0.5V @ 30A
1V @ 60A
0~18A
4.5mA
0.1%+0.2%F.S.
0~180A
45mA
0.1%+0.2%F.S.
0~60A
15mA
0.1%+0.2%F.S.
0~600A
150mA
0.1%+0.2%F.S.
0.008~32Ω
35mS
0.07S+0.35%
0.4~1600Ω
0.7mS
0.75S+0.1%
0.0025~10Ω
112.5mS
0.225S+0.35% *4
0.125~500Ω
2.25mS
1.2S+0.1%
0.07S+0.35%
0.0014S+0.35%
0.225S+0.35%
0.0045S+0.35%
0~16V
4mV
0~80V
20mV
0~16V
4mV
0~80V
20mV
0~80V
0.05%+0.1%F.S.
0.36~650W
3.6~6500W
4.6mW
46mW
0.5%+0.5%F.S.
0.025~10ms
1µs
1µs+100ppm
3mA~0.75A/µs
3mA/µs
1ms~30s
1ms
1ms+100ppm
30mA~7.5A/µs
30mA/µs
0.4%F.S.
0~80V
0.5V @ 300A
1V @ 600A
0.05%+0.1%F.S.
1.2~1040W
12~10400W
22.5mW
225mW
0.5%+0.5%F.S.
0.025~10ms
1µs
1µs+100ppm
10mA~3A/µs
12mA/µs
24µs (typical)
0~18A
4.68mA
10400W
0~600A
1ms~30s
1ms
1ms+100ppm
100mA~25A/µs
100mA/µs
20µs (typical)
0~180A
46.8mA
0~60A
15mA
0.4%F.S.
0~600A
150mA
0~16V
0~80V
0.5mV
2.4mV
0.05%+0.05%F.S.
0~16V
0~80V
0.5mV
2.4mV
0.05%+0.05%F.S.
0~18A
0.5mA
0~60A
1.3mA
0~650W
0.1%+0.1%F.S.
0~180A
4.7mA
0~6500W
0.3%+0.3%F.S.
18A
180A
310 x 440 x 589 mm / 12.2 x 17.3 x 23.2 inch
62 kg / 136.68 lbs
CE
All specifications are subject to change without notice. Please visit our website for the most up to date specifications.
0.1%+0.1%F.S.
0~600A
16.1mA
0~1040W
0~10400W
0.3%+0.3%F.S.
60A
600A
443.7 x 440 x 589 mm / 17.5 x 17.3 x 23.2 inch
90 kg / 198.41 lbs
CE
Number of parallel load units and rating :
Model
Rating
63201
63202
63203
63204
63205
600A/5.2kW
900A/7.8kW
1200A/10.4kW
1500A/13kW
1800A/15.6kW
100A/5.2kW
150A/7.8kW
200A/10.4kW
250A/13kW
300A/15.6kW
1200A/10.4kW
1800A/15.6kW
2400A/20.8kW
3000A/26kW
3600A/31.2kW
200A/10.4kW
300A/15.6kW
400A/20.8kW
500A/26kW
600A/31.2kW
360A/13kW
540A/19.5kW
720A/26kW
900A/32.5kW
1080A/39kW
63206
63207
63208
63209
63210
2000A/31.2kW
3000A/46.8kW
4000A/62.4kW
5000A/78kW
6000A/93.6kW
300A/29kW
450A/43.5kW
600A/58kW
750A/72.5kW
900A/87kW
Units
2
3
4
5
6
1200A/20.8kW 600A/20.8kW 1200A/31.2kW
1800A/31.2kW 900A/31.2kW 1800A/46.8kW
2400A/41.6kW 1200A/41.6kW 2400A/62.4kW
3000A/52kW
1800A/52kW
3000A/78kW
3600A/62.4kW 2400A/62.4kW 3600A/93.6kW
6 3 2 00 Series
SPECIFICATIONS
Model
power *1
Current
Voltage
Min. Operating
voltage
63207
1040W
0~30A
63208
10400W
0~300A
0~80V
0.5V @ 15A
0.5V @ 150A
1V @ 30A
1V @ 300A
1560W
0~60A
63209
15600W
0~600A
0~80V
0.5V @ 30A
0.5V @ 300A
1V @ 60A
1V @ 600A
1560W
0~100A
63210
15600W
0~1000A
0~80V
0.5V @ 50A
0.5V @ 500A
1V @ 100A
1V @ 1000A
1450W
0~15A
14500W
0~150A
0~500V
1.25V @ 7.5A
1.25V @ 75A
2.5V @ 15A
2.5V @ 150A
Constant Current mode
Range
0~30A
0~300A
0~60A
0~600A
0~100A
0~1000A
0~15A
0~150A
Resolution
9.3mA
75mA
15mA
150mA
31.25mA
250mA
3.75mA
37.5mA
Accuracy
0.1%+0.2%F.S. 0.1%+0.2%F.S. 0.1%+0.2%F.S. 0.1%+0.2%F.S. 0.1%+0.2%F.S. 0.1%+0.2%F.S. 0.1%+0.1%F.S. 0.2%+0.1%F.S.
Constant Resistance Mode
Range
0.005~20Ω
0.25~1000Ω
0.0025~10Ω
0.125~500Ω
0.0015~6Ω
0.075~300Ω
0.083~333Ω
3.3~13200Ω
Resolution*6
55.7mS
1.1mS
110mS
2.22mS
186.5mS
3.73mS
3.21mS
80.1µS
Accuracy *2
0.111S+0.35%
0.9S+0.1%
0.22S+0.35% *4
1.2S+0.1%
0.373S+0.35% *4
1.2S+0.1%
0.0064S+0.35%
0.092S+0.1%
Accuracy *3 (Vin>7V) 0.111S+0.35%
0.0022S+0.35%
0.22S+0.35%
0.0044S+0.35% 0.373S+0.35% 0.0075S+0.35% 0.0064S+0.35%
161µS+0.35%
Constant Voltage mode
Range
0~16V
0~80V
0~16V
0~80V
0~16V
0~80V
0~125V
0~500V
Resolution
4mV
20mV
4mV
20mV
4mV
20mV
31mV
125mV
Accuracy
0.05%+0.1%F.S. 0.05%+0.1%F.S. 0.05%+0.1%F.S. 0.05%+0.1%F.S. 0.05%+0.1%F.S. 0.05%+0.1%F.S. 0.05%+0.1%F.S. 0.05%+0.1%F.S.
Constant Power mode
Range
0.744~1040W
6~10400W
1.2~1560W
12~15600W
2.5~1560W
20~15600W
5~1450W
50~14500W
Resolution
9.3mW
75mW
22.5mW
225mW
31.255mW
250mW
25mW
250mW
Accuracy
0.5%+0.5%F.S. 0.5%+0.5%F.S. 0.5%+0.5%F.S. 0.5%+0.5%F.S. 0.5%+0.5%F.S. 0.5%+0.5%F.S. 0.5%+0.5%F.S. 0.5%+0.5%F.S.
Dynamic mode
Timing
T1&T2
0.025~10ms
1ms~30s
0.025~10ms
1ms~30s
0.025~10ms
1ms~30s
0.025~10ms
1ms~30s
Resolution
1µs
1ms
1µs
1ms
1µs
1ms
1µs
1ms
Accuracy
1µs+100ppm
1ms+100ppm
1µs+100ppm
1ms+100ppm
1µs+100ppm
1ms+100ppm
1µs+100ppm
1ms+100ppm
Slew rate
6mA~1.5A/µs
50mA~12.5A/µs
12mA~3A/µs
100mA~25A/µs
20mA~5A/µs
166mA~41.6A/µs 3mA~0.75A/µs
25mA~6A/µs
Resolution
6mA/µs
50mA/µs
12mA/µs
100mA/µs
20mA/µs
166mA/µs
3mA/µs
25mA/µs
Accuracy
Min. Rise Time
20µs (typical)
20µs (typical)
20µs (typical)
24 µs (typical)
Current
Range
0~30A
0~300A
0~60A
0~600A
0~100A
0~1000A
0~15A
0~150A
Resolution
9.37mA
75mA
15mA
150mA
31.25mA
250mA
3.75mA
37.5mA
Accuracy
0.4%F.S.
0.4%F.S.
0.4%F.S.
0.4%F.S.
Measurement
Voltage Read Back
Range
0~16V
0~80V
0~16V
0~80V
0~16V
0~80V
0~125V
0~500V
0.5mV
2.4mV
0.5mV
2.4mV
0.5mV
2.4mV
3.5mV
13.7mV
Resolution
0.05%+0.05%F.S.
0.05%+0.05%F.S.
0.05%+0.05%F.S.
0.05%+0.05%F.S.
Accuracy
Current Read Back
0~30A
0~300A
0~60A
0~600A
0~100A
0~1000A
0~15A
0~150A
Range
0.7mA
8.2mA
1.3mA
16.1mA
2.2mA
27.2mA
0.4mA
4.2mA
Resolution
0.1%+0.1%F.S.
0.1%+0.1%F.S.
0.1%+0.1%F.S.
0.1%+0.1%F.S.
Accuracy
Power Read Back
Range
0~1040W
0~10400W
0~1560W
0~15600W
0~1560W
0~15600W
0~1450W
0~14500W
Accuracy*5
0.3%+0.3%F.S.
0.3%+0.3%F.S.
0.3%+0.3%F.S.
0.3%+0.3%F.S.
General
Short Circuit
current
30A
300A
60A
600A
100A
1000A
15A
150A
Dimension (HxWxD)
443.7 x 440 x 589 mm / 17.5 x 17.3 x 23.2 inch
762.8 x 546 x 700 mm / 30 x 21.5 x 27.6 inch 762.8x546x700mm/30x21.5x27.6 inch(cabinet) 762.8x546x700mm/30x21.5x27.6 inch(cabinet)
Weight
90 kg / 198.24 lbs
170 kg / 374.45 lbs
170 kg / 374.45 lbs
170 kg / 374.45 lbs
Safety & EMC
CE
CE
CE
CE
All specifications are subject to change without notice. Please visit our website for the most up to date specifications.
Note*1 : The power rating specifications at ambient temperature=25˚C.
And see the diagram on the right for power derating.(Derate power by 1.53% per˚C from 25˚C to 40˚C)
Note*2 : The Vin must be greater than min. operating voltage of each model.
Note*3 : The Vin must be greater than 7V of each model.
Note*4 : Setting error will be 1% for R < 0.005Ω at CRL range.
Note*5 : Power F.S. = Vrange F.S. x Irange F.S.
Power Rating
100%
77%
Note*6 : S (siemens) is the SI unit of conductance, equal to one reciprocal ohm.
Note*7 : If the operating voltage exceeds the rated voltage for 1.1 times, it would cause
permanent damage to the device.
Note*8 : 600V modification is available.
˚C
5˚C
15˚C
25˚C
35˚C
Ambient Temperature
Low Voltage & V-I Curve Operating Characteristics (Typical) of 63200 Series
V-I Curve:
Low Voltage Operating:
Model 63201/ 63203/ 63205/ 63206/ 63207/ 63208/ 63209
Model 63201/ 63203/ 63205/ 63206/ 63207/ 63208/ 63209
Low Voltage Operating: Model 63202/63204/63210
150A
140A
130A
V-I Curve: Model 63202/63204/63210
600V
120A
550V
110A
63210
63210
63204*8
63202
110A 120A 130A 140A 150A
Note: All specifications are measured at load input terminals. (Ambient temperature of +25℃)
ORDERING INFORMATION
63201 : DC Electronic Load 2.6kW/ 300A/ 80V
63202 : DC Electronic Load 2.6kW/ 50A/ 500V
63203 : DC Electronic Load 5.2kW/ 600A/ 80V
63204 : DC Electronic Load 5.2kW/ 100A/ 500V
63205 : DC Electronic Load 6.5kW/ 180A/ 80V
63206 : DC Electronic Load 10.4kW/ 600A/ 80V
63207 : DC Electronic Load 10.4kW/ 300A/ 80V
63208 : DC Electronic Load 15.6kW/ 600A/ 80V
63209 : DC Electronic Load 15.6kW/ 1000A/ 80V
63210 : DC Electronic Load 14.5kW/ 150A/ 500V
A632001 : Remote Controller
A632002 : Load Cable 38mm/242A/200cm x 2
A632003 : Load Cable 80mm/390A/200cm x 2
A632004 : Sync. Link Box
A632005 : Softpanel for 63200 Series
A632006 : NI USB-6211 Bus-Powered
Multifunction DAQ
Developed and Manufactured by :
Distributed by:
CHROMA ATE INC.
致茂電子股份有限公司
HEADQUARTERS
No. 66, Hwa-Ya 1st Rd.,
Hwa-Ya Technology Park,
Kuei-Shan Hsiang,33383
Taoyuan County, Taiwan
Tel: +886-3-327-9999
Fax: +886-3-327-8898
http://www.chromaate.com
CHINA
CHROMA ELECTRONICS
(SHENZHEN) CO., LTD.
8F, No.4, Nanyou Tian An
Industrial Estate, Shenzhen,
China PC: 518052
Tel: +86-755-2664-4598
Fax: +86-755-2641-9620
A632001
JAPAN
CHROMA JAPAN CORP.
472 Nippa-cho, Kouhoku-ku,
Yokohama-shi, Kanagawa,
223-0057 Japan
http://www.chroma.co.jp
E-mail: [email protected]
U.S.A.
CHROMA SYSTEMS
SOLUTIONS, INC.
25612 Commercentre Drive,
Lake Forest, CA 92630-8830
Tel: +1-949-600-6400
Fax: +1-949-600-6401
Toll Free: +1-866-600-6050
http://www.chromausa.com
E-mail: [email protected]
EUROPE
CHROMA ATE EUROPE B.V.
Morsestraat 32, 6716 AH Ede,
The Netherlands
Tel: +31-318-648282
Fax: +31-318-648288
http://www.chromaeu.com
E-mail: [email protected]
Worldwide Distribution and Service Network
63200-201102-1000
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement