Oscilloscope Probes and Probe Accessories

Oscilloscope Probes and Probe Accessories
Oscilloscope Probes and
Probe Accessories
PROBE SELECTION GUIDE
Wa
veA
ce
Front Cover:
ZS Series High Impedence
Active Probes
Os
cill
osc
ope
Wa
s
veJ
et 3
00A
Os
Wa
cill
osc
MX veSu
ope
s-B rfer
s
Os MX
cill s-B
osc /
HD
ope MSO
s
Hig O400
hD 0/
efin HD
itio O4
n O 000
sci -M
Veh
llos S
icle
cop
Bu
es
sA
nal
y
zer
Wa
s
Os veRu
cill nn
osc er X
ope i-A
/M
s
Wa
XiA
Os veRu
cill nn
osc er 6
ope Zi
s
HD
O
Hig 600
hD 0/
efin HD
itio O60
n O 00
sci -M
HR
llos S
O1
cop
2-b
es
it O
sci
llos
Wa
cop
es
Os vePro
cill
osc /SDA
ope /DD
A/7
s
Wa
Zi/
v
7Z
Os eMa
cill ste
i-A
osc r/S
ope DA
/DD
s
A/8
Lab
Zi/
Ma
Ziste
A
r9
ZiA
Os
Lab
cill
Ma
osc
ste
ope
r 10
s
Zi O
sci
llos
cop
es
Teledyne LeCroy has a wide variety of world class probes and amplifiers to compliment its
product line. From the ZS high impedance active probes to the WaveLink differential probing
system which offers bandwidths up to 25 GHz, Teledyne LeCroy probes and probe
accessories provide optimum mechanical connections for signal measurement.
Active Voltage Probes - p. 4 - 7
ZS1000
ZS1500
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
ZS2500
ZS4000
Current Probes - p. 8 -11
AP015
CP030
CP031
CP150
CP500
Differential Probes - p. 12 - 23
ZD200
ZD500
ZD1000
ZD1500
AP033
AP034
D410
D420
D400A-AT
D600A-AT
D610
D620
D830
D830-PS
D1030
D1030-PS
D1330
D1330-PS
WL-PLink-A-CASE
WL-PBUS-CASE
LPA-2.92
WL-2.92MM-CASE
D1305-A
D1305-A-PS
D1605-A
D1605-A-PS
D2005-A
D2005-A-PS
D2505-A
D2505-A-PS
2
✓
✓
Os
cill
osc
ope
Wa
s
veJ
et 3
00A
Os
Wa
cill
osc
MX veSu
ope
s-B rfer
s
Os MX
cill s-B
osc /
HD
ope MSO
s
Hig O400
hD 0/
efin HD
itio O4
n O 000
sci -M
Veh
llos S
icle
cop
Bu
es
sA
nal
y
zer
Wa
s
Os veRu
cill nn
osc er X
ope i-A
/M
s
Wa
Xiv
A
Os eRu
cill nn
osc er 6
ope Zi
s
HD
O
Hig 600
hD 0/
efin HD
itio O60
n O 00
sci -M
HR
llos S
O1
cop
2-b
es
it O
sci
llos
Wa
cop
es
Os vePro
cill
osc /SDA
ope /DD
A/7
s
Wa
Zi/
v
7Z
Os eMa
cill ste
i-A
osc r/S
ope DA
/
s
DD
A/8
Lab
Zi/
Ma
Ziste
A
r9
ZiA
Os
Lab
cill
Ma
osc
ste
ope
r 10
s
Zi O
sci
llos
cop
es
Wa
veA
ce
High Voltage Differential Probes - p. 24 - 27
ADP300
ADP305
AP031
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Differential Amplifiers - p. 28 - 31
DXC200
DA101
DA1855A
DA1855A-PR2
DA1855A-PR2-RM
DA1855A-RM
DXC-5100
DXC100A
High Voltage Probes - p. 32 - 35
PPE1.2KV
PPE2KV
PPE4KV
PPE5KV
PPE6KV
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Optical Probes - p. 36 - 39
OE425
OE455
OE525
OE555
OE695G
✓
Passive Probes - p. 40 - 43
PP005A
✓
PP006A
✓
PP-007-WR
✓
PP008
PP009
PP010
✓
✓
✓
PP011
PP016
✓
✓
✓
✓
✓
PP017
✓
✓
PP018
✓
Transmission Line Probes - p. 44 - 47
PP065
PP066
✓
✓
✓
✓
✓
✓
✓
✓
Note: Some probes require purchase of the amplifier and platform/cable assembly separately – Reference detailed literature for more infomation.
3
ACTIVE VOLTAGE PROBES
44
ACTIVE VOLTAGE PROBES
Engineers must commonly probe high-frequency signals with high
signal fidelity. Typical passive probes with high input R and C provide good
response at lower frequencies, but inappropriately load the circuit and
distort signals at higher frequencies. Active voltage probes feature both
high input R and low input C to reduce circuit loading across the entire
Teledyne LeCroy
Active Voltage Probes
Model Numbers:
ZS1000
ZS1500
ZS2500
ZS4000
probe/oscilloscope bandwidth. With low circuit loading and a form factor
that allows probing in confined areas, the active voltage probe becomes
the everyday probe for all different types of signals and connection points.
Opposite page:
ZS Series High Impedance Active Probe
5
ZS SERIES ACTIVE PROBES
The ZS Series probes are high impedance, low capacitance active probes
that maintain high signal fidelity through 4 GHz. A small form factor and
a wide variety of accessories ensures the ZS probe meets every difficult
probing challenge.
Engineers must commonly probe high frequency signals with high signal
fidelity. Typical passive probes with high input R and C provide good
response at lower frequencies but inappropriately load the circuit and distort
signals at higher frequencies. The ZS Series features both high input R
(1 MΩ) and low input C (0.6 pF and 0.9 pF) to reduce circuit loading across
the entire probe/oscilloscope bandwidth. The ZS1000 is ideal for
200–600 MHz oscilloscopes. The ZS1500 is ideal for 1 GHz oscilloscopes,
the ZS2500 is ideal for 2 GHz oscilloscopes, and the ZS4000 is ideal for
Teledyne LeCroy
Active Voltage Probe
Model Numbers:
ZS1000
ZS1500
ZS2500
ZS4000
2.5 GHz and 4 GHz oscilloscopes.
ZS4000
PK-ZS-010
Channel ID
Colored Clips
PK-ZS-019
Freehand Probe Holder
PK-ZS-006
Right Angle Socket
PACC-PT005
Bent Tip
PACC-PT003
IC Tip
PK-ZS-001
Probe Tip - Standard
PK-ZS-017
Pogo Tip
PK-ZS-014
Y-Lead
Adapter
PK-ZS-023
Straight Pin
Lead - 13cm
PK-ZS-022
Straight Pin
Lead - 7cm
PACC-LD003
Right Angle
Pin Lead - 5cm
PACC-LD004
Right Angle
Pin Lead - 10cm
PK-ZS-018
2.54 mm Square
Pin Adapter
PK-ZS-021
Ground Blade Narrow
PK-ZS-016
Offset Ground
(Z Lead)
PK-ZS-020
Pogo Ground Lead
PK-ZS-015
Ground Blade - Wide
PK-ZS-009
Copper Tape
PK-ZS-024
2.54 mm PCB
Adapter
PK-ZS-007R
Microclip Sprung
Hook, Red
6
PK-ZF-025
QFPIC Clip Yellow Short
PK-ZF-025
QFPIC Clip Green Short
PK-ZS-007B
Microclip Sprung
Hook, Black
ZS SERIES ACTIVE PROBES
ZS1000
ZS1500
ZS2500
PK-ZS-010
Channel ID
Colored Clips
PACC-MS005
Freehand Probe Holderk
PK-ZS-012
2.54 mm Square Pin
Adapter
PK-ZS-006
Right Angle Socket
PACC-PT005
Bent Tip
PACC-PT003
IC Tip
PK-ZS-001
Probe Tip - Standard
Qty: 3
PK-ZS-013
Pogo Tip
PK-ZS-005
Y-Lead
Adapter
PK-ZS-004
Single Lead Long
PK-ZS-003
Single Lead Short
PACC-LD003
Right Angle
Pin Lead - 5cm
PACC-LD004
Right Angle
Lead - Long
PACC-CD008
Pogo Ground Lead
PK-ZS-002
Offset Ground
PK-ZS-008
Ground Blade - Narrow
PK-ZS-011
Ground Blade - Wide
PK-ZS-007R
Microclip Sprung
Hook, Red
PK-ZS-009
Copper Tape
PK-ZS-007B
Microclip Sprung
Hook, Black
Ordering Information
Product Description
Product Code
4 GHz, 0.6 pF, 1 MΩ
High Impedance Active Probe
2.5 GHz, 0.9 pF, 1 MΩ
High Impedance Active Probe
1.5 GHz, 0.9 pF, 1 MΩ
High Impedance Active Probe
1 GHz, 0.9 pF, 1 MΩ
High Impedance Active Probe
Set of 4 ZS2500, 2.5 GHz, 0.9 pF, 1 MΩ
High Impedance Active Probes
Set of 4 ZS1500, 1.5 GHz, 0.9 pF, 1 MΩ
High Impedance Active Probes
Set of 4 ZS1000, 1 GHz, 0.9 pF, 1 MΩ
High Impedance Active Probes
ZS4000
Specifications
ZS2500
Electrical Characteristics
ZS1500
ZS1000
ZS2500-QUADPAK
ZS1500-QUADPAK
ZS1000-QUADPAK
ZS1000
Probe Bandwidth
Input Capacitance
DC Input Resistance
Probe Offset Range
Attenuation
Input Dynamic Range
Non-destruct Voltage
1 GHz
N/A
General Characteristics
Cable Length
ZS1500
ZS2500
ZS4000
1.5 GHz
0.9 pF
2.5 GHz
4 GHz
0.6 pF
1 MΩ
±12 V
÷10
±8 V
20 V
1.3 m
Standard Accessory/Quantity
Accessory Description
2.54 mm PCB Adaptor
2.54mm Square Pin Adapter
2.54mm Square Pin Adaptor
IC Tip
Bent Tip
Channel ID Clips
(Set of 4 colors)
Copper Tape Pad
Freehand Probe Holder
Freehand Probe Holder
Ground Blade – Narrow
Ground Blade – Wide
Ground Blade, Narrow
Ground Blade, Wide
Micro-Grabber Pair
Offset Ground
Replacement
Part Number
ZS1000
ZS1500
ZS2500 ZS4000
PK-ZS-024
PK-ZS-012
PK-ZS-018
PACC-PT003
PACC-PT005
1
1
1
1
1
PK-ZS-010
4
1
PK-ZS-009
PK-ZS-019
PACC-MS005
PK-ZS-008
PK-ZS-011
PK-ZS-021
PK-ZS-015
PK-ZS-007R and
PK-ZS-007B
PK-ZS-016
2
2
1
1
1
1
1
1
5
1
2
2
2
Accessory Description
Replacement
Part Number
Offset Ground – Z Lead
Pogo Ground Lead
Pogo Ground Lead
Pogo Tip
Pogo Tip
Probe Tip – Standard
QFPIC Clips (set of 2)
Right Angle Lead – Long
Right Angle Lead – Short
Right Angle Socket
Straight Pin Lead – Long
Straight Pin Lead – Long
Straight Pin Lead – Short
Straight Pin Lead – Short
Y Lead Adapter
Y Lead Adaptor
PK-ZS-002
PK-ZS-020
PACC-CD008
PK-ZS-017
PK-ZS-013
PK-ZS-001
PK-ZS-025
PACC-LD004
PACC-LD003
PK-ZS-006
PK-ZS-023
PK-ZS-004
PK-ZS-022
PK-ZS-003
PK-ZS-005
PK-ZS-014
ZS1000
ZS1500
ZS2500 ZS4000
1
1
1
3
1
1
1
1
1
1
1
3
3
1
1
1
1
1
1
1
7
CURRENT PROBES
8
CURRENT PROBES
Measuring AC and DC Currents
Teledyne LeCroy current probes do not require the breaking of a circuit or the
insertion of a shunt to make accurate and reliable current measurements.
Based on a combination of Hall Effect and transformer technology, Teledyne
LeCroy current probes are ideal for making accurate AC, DC, and impulse
current measurements.
Fully Integrated with Oscilloscope
Many current probes require external power supplies or amplifiers to display
Teledyne LeCroy
Current Probes
Model Numbers:
AP015
CP030
CP031
CP150
CP500
DCS015
a waveform on the oscilloscope screen. All Teledyne LeCroy current probes
are powered through the Teledyne LeCroy ProBus connection and require
no additional hardware. Along with providing power, the ProBus connection
allows the current probe and oscilloscope to communicate, resulting in
current waveforms automatically displayed on screen in Amps, and
calculated power traces scaled correctly in Watts. This full integration
also allows for Degauss and Autozero functions to be done directly from
the oscilloscope with a single button press.
Applications
Teledyne LeCroy current probes are available in a wide range of models for a
wide range of applications. The full range of Teledyne LeCroy current probes
includes models with bandwidths up to 100 MHz, peak currents up to 700 A
and sensitivities to 10 mA/div. Multiple current probes can be used together
to make measurements on three-phase systems, or a single current probe
can be used with a voltage probe to make accurate instantaneous power
measurements. Teledyne LeCroy current probes are often used in applications such as the design and test of switching power supplies, motor drives,
electric vehicles, and uninterruptible power supplies.
Opposite page:
CP031, 30A, 100 MHz Current Probe.
9
CURRENT PROBES
AP015 – 30 A, 50 MHz
CP030 – 30 A, 50 MHz
The AP015 current probe can
The CP030 was designed with
measure continuous current of
a small form factor for today’s
30 Arms and peak pulses of up to
crowded boards. The small jaw
50 A for durations up to 10 sec-
can probe currents in tight spaces
Teledyne LeCroy
Current Probes
Model Numbers:
onds. This probe also features
and still clamp onto conductors up
an overheating protection circuit,
to 5 mm in diameter. Continuous
which will display an on-screen
currents of 30 Arms and peak
AP015
CP030
CP031
CP150
CP500
DCS015
warning to the user to prevent
currents of 50 A can be measured
­damage. A probe unlock detection
by the CP030, which also features
feature is also built in to the AP015
a 50 MHz bandwidth.
to ensure ­accurate measurements.
CP031 – 30A, 100 MHz
10
The CP031 is Teledyne LeCroy’s
DCS015 – Deskew
Calibration Source for AP015
highest bandwidth current probe.
The DCS015 calibration source has
Along with the high 100 MHz
both voltage and current time-
bandwidth the CP031 can probe
aligned signals, which enables the
continuous currents of 30 Arms
precise deskew of voltage and
and peak currents up to 50 A.
current probes. Most voltage probes
The CP031 features a small form
along with the CP031, CP030 and
factor making it easier to probe on
AP015 are compatible with the
a ­crowded, compact board.
DCS015.
CURRENT PROBES
CP150 – 150 A, 10 MHz
CP500 – 500 A, 2 MHz
Features:
150 Arms continuous current
500 Apeak
10 MHz bandwidth
Features:
500 Arms continuous current
700 Apeak
2 MHz bandwidth
•
•
•
Specifications
•
•
•
AP015
CP030*†
CP031*†
CP150
CP500
30 A
50 MHz
100 MHz
150A
10 MHz
500 A ≤ 30 µs
500 A
2 MHz
700 A
Electrical Characteristics
Max. Continuous Input Current
Bandwidth
Max. Peak Current at Pulse Width
Rise Time (typical)
Minimum Sensitivity
Max. In-Phase Current
Low-Frequency Accuracy
AC Noise
Coupling
General Characteristics
Cable Length
Weight
Max. Conductor Size (Diameter)
Interface
Usage Environment
Operating Temperature
Max. Relative Humidity
Max. Altitude
Maximum Insulated Wire Voltage
50 MHz
50 A ≤ 10 s
50 A ≤ 10 µs
≤ 7 ns
≤ 3.5 ns
10 mA/div
-
≤ 2.5 mA
1%
< 35 ns
500 A
200 mA/div
≤ 25 mA
< 175 ns
1150 A
25 mA
AC, DC, GND
2m
300 g
5 mm
300 V CAT I
1.5 m
240 g
ProBus, 1 MΩ only‡
Indoor
0˚ C to 40˚ C
80%
2000 m
300 V CAT I,
150 V CAT II
2m
500 g
20 mm
6m
630 g
600 V CAT I, 300 V CAT II
* Guaranteed at 23 °C ±3 °C
† The CP031 and CP030 are compatible with Teledyne LeCroy oscilloscopes running firmware version 4.3.1.1 or greater.
‡ Requires AP-1M for use with 50 Ω input only oscilloscopes
Ordering Information
Product Description
30 A; 50 MHz Current Probe - AC/DC; 30 Arms;
50 Apeak Pulse
30 A; 50 MHz Current Probe - AC/DC; 30 Arms;
50 Apeak Pulse
30 A; 100 MHz Current Probe - AC/DC; 30 Arms;
50 Apeak Pulse
Product Code
AP015
CP030
CP031
Product Description
150 A; 10 MHz Current Probe - AC/DC; 150 Arms;
500 Apeak Pulse
500 A; 2 MHz Current Probe - AC/DC; 500 Arms;
700 Apeak Pulse
Deskew Calibration Source for AP015
Product Code
CP150
CP500
DCS015
11
DIFFERENTIAL PROBES
12
DIFFERENTIAL PROBES
Teledyne LeCroy
Differential Probes
Model Numbers:
Differential active probes are like two probes in one. Instead of
measuring a test point in relation to a ground point (like single-ended
active probes), differential probes measure the difference in voltage of
a test point in relation to another test point.
200 MHz - 1.5 GHz
ZD200
ZD500
ZD1000
ZD1500
AP033
AP034
4 GHz - 6 GHz
D410
D410-PS
D420
D420-PS
D400A-AT
D600A-AT
D610
D610-PS
D620
D620-PS
8 GHz - 13 GHz
D830
D1030
D1330
11 GHz - 25 GHz
D1305-A
D1605-A
D2005-A
D2505-A
Opposite page:
WaveLink® High Bandwidth Differential Probing System
(13 GHz – 25 GHz)
13
ZD SERIES DIFFERENTIAL PROBES
The ZD Series probes provide wide dynamic range, excellent noise and
loading performance and an extensive set of probe tips, leads, and ground
accessories to handle a wide range of probing scenarios. The low 1 pF
capacitance means this probe is ideal for all frequencies. The ZD Series
differential probes provide full system bandwidth for all Teledyne LeCroy
Oscilloscopes 1.5 GHz and lower.
Fully Integrated
Teledyne LeCroy
Differential Probe
Model Numbers:
ZD200
ZD500
ZD1000
ZD1500
With the ProBus interface, the ZD500, 1000, and 1500 become an integral
part of the oscilloscope. All probe gain and offset controls are transparent to
the user, making it easier to probe the circuit without concern for which gain
setting to choose. When used with a Teledyne LeCroy digital oscilloscope, no
external power supply is required.
Wide Dynamic Range
The ZD500, 1000, 1500 probes provide transparent probe attenuation so
signals are always optimized for the display. The differential range is 18 Vp-p
with a differential offset of ±8V and common mode range of ±10 V, making
these probes versatile for every probing application.
Wide Applications
The wide dynamic range of 16 Vp-p and offset range of ±8V suit this probe to
a wide range of applications and signal types. The ZD differential probes are
ideally suited for Automotive, Serial Data, power, and general purpose use.
PACC-MS001
Hands Free Probe Holder
ZD1500 / ZD1000 / ZD500 Probe
PACC-ZD004
Tip Saver
Qty: 2
PACC-PT001
Straight Tip
Qty: 4
PACC-ZD005
Swivel Tip Adapter
PACC-ZD003
Spring-loaded
Ground (Long)
Qty: 2
PACC-ZD001
Y Lead
Adapter
14
PACC-ZD002
Solder-In-Lead
Qty: 2
PCF200
Probe Calibration Fixture
PACC-ZD006
Small IC Adapter
Qty: 2
PACC-CD008
Spring-loaded
Ground (Short)
Qty: 2
PACC-LD003
Right Angle
Connector (Short)
Qty: 2
PK006-4
Micro-Grabber
Qty: 2
PACC-LD004
Right Angle
Connector (long)
Qty: 2
PACC-CL001
Mini-Grabber
Qty: 2
ZD SERIES DIFFERENTIAL PROBES
Specifications
Electrical Characteristics
Bandwidth (Warranted)
Bandwidth (Typical)
Risetime 10–90% (Typical)
Risetime 20–80% (Typical)
LF Attenuation Accuracy (Warranted)
Zero Offset (Typical)
(within 15 minutes after autozero)
System Noise (Typical)
Probe Noise Density (Typical)
Input Differential Range (Nominal)
Differential Offset Range (Nominal)
Offset Gain Accuracy (Typical)
Common Mode Range (Nominal)
Maximum Non-destruct Voltage
(Nominal)
CMRR (Typical)
DC Input Resistance (Nominal)
Differential Input Capacitance
(Typical)
ZD200
ZD500
ZD1000
ZD1500
200 MHz
500 MHz
650 MHz
650 ps
500 ps
1000 MHz
1200 MHz
375 ps
280 ps
2%
5 mV
1500 MHz
1700 MHz
270 ps
200 ps
-
1.75 ns
-
1%
-
1.3 mVrms
-
3 mVrms
± 20 V
-
± 60 V
-
80 dB @ 60 Hz
50 [email protected] MHz
250 kΩ (Common Mode)
1 MΩ (Differential Mode)
3.5 pF
60 dB 50/60 Hz
30 dB 20 MHz
25 dB 500 MHz
38 nV/rt (Hz)
±8 V (16 Vp-p)
±18 V
2%
±10 V
30 V
1.75 mVrms
60 dB 50/60 Hz
30 dB 20 MHz
25 dB @ 1000 MHz
50 kΩ (Common Mode)
120 kΩ (Differential Mode)
< 1.0 pF
60 dB 50/60 Hz
30 dB 20 MHz
25 dB @ 1500 MHz
Ordering Information
Product Description
200 MHz, 3.5 pF, 1 MΩ Active Differential Probe
500 MHz, 1.0 pF, 1 MΩ Active Differential Probe
1 GHz, 1.0 pF, 1 MΩ Active Differential Probe
1.5 GHz, 1.0 pF, 1 MΩ Active Differential Probe
Standard Accessories
Y Lead Adapter, Qty 1
Solder-In Lead, Qty 2
Long Spring Loaded Bendable Ground, Qty 2
Tip Saver, Qty 2
Swivel Tip Adapter
Small IC Adapter, Qty 2
Replacement Accessory Kit for ZD200
Replacement Leadset for ZD200
Straight Tip, Qty 4
Right Angle Connector Short, Qty 2
Product Code
ZD200
ZD500
ZD1000
ZD1500
PACC-ZD001
PACC-ZD002
PACC-ZD003
PACC-ZD004
PACC-ZD005
PACC-ZD006
PACC-ZD007
PACC-ZD008
PACC-PT001
PACC-LD003
Product Description
Product Code
Right Angle Connector Long, Qty 2
Micrograbber, Qty 2
Minigrabber, Qty 2
Short Spring Loaded Bendable Ground, Qty 2
Probe Calibration Fixture, Qty 1
ZD Replacement Kit
Hands Free Probe Holder, Qty1
PACC-LD004
PK006-4
PACC-CL001
PACC-CD008
PCF200
PK111
PACC-MS001
15
WAVELINK LOW BANDWIDTH DIFFERENTIAL PROBES
®
WaveLink® probes provide industry leading technology for wideband signal
connection to test instruments. The first differential probes to employ SiGe
technology, they deliver full system bandwidth when used with oscilloscopes
up to 6 GHz.
WaveLink probes:
• Maintain good loading characteristics across the frequency span
• Optimized for gain, noise and bandwidth for optimal performance
• Offer broad range of dynamic range and noise over gain settings by
incorporating automatic probe attenuation changes
Teledyne LeCroy WaveLink
Low Bandwidth Differential
Probe and Accessory
Model Numbers:
D410
D410-PS
D420
D420-PS
D400A-AT
D600A-AT
D610
D610-PS
D620
D620-PS
WL-PBUS-CASE
WL-PLINK-CASE
Dx10-PT-KIT
Dx20-PT-KIT
Dx10-HiTemp
Dx20-HiTemp
WaveLink is the first differential probe to use a unique calibration process
to achieve superb waveform fidelity for routine voltage measurements.
Calibration coefficients “fine tune” the frequency response of each WaveLink
probe and are individually determined during factory calibration and programmed into the probe. The oscilloscopes read this data and use it to digitally
compensate the entire system response for superior fidelity.
WL-PBUS-CASE
ProBus
WavePro/SDA/DDA 7 Zi/Zi-A ≤ 4 GHz
WaveRunner 6 Zi
WL-PLINK-CASE
ProLink
WaveMaster/SDA/DDA 8 Zi/Zi-A ≥ 4 GHz
WavePro/SDA/DDA 7 Zi/Zi-A ≥ 4 GHz
D610
6 GHz
D620
6 GHz
D410
4 GHz
D420
4 GHz
D400A-AT
D600A-AT
Dx10-SP
Dx20-SP
Dx10-QC
Dx10-HITEMP
(OPTIONAL)
16
Dx10-SI
Dx10-PT-KIT
(Included in Dx10-PS)
Dx20-QC
Dx20-HITEMP
(OPTIONAL)
Dx20-SI
Dx20-PT-KIT
(Included in Dx20-PS)
WAVELINK LOW BANDWIDTH DIFFERENTIAL PROBES
®
Bandwidth*
(Probe Only, Guaranteed)
(System Bandwidth, Typical)
Rise Time* (10–90%)
Rise Time* (20–80%)
Noise (System)
Input
Input Dynamic Range
(Nominal)
Input Common Mode Voltage
Range (Nominal)
Input Offset Voltage Range
Non-destructive
Input Range (Nominal)
Attenuation
DC Input Resistance
(Nominal)
Impedance
(Zmin, Typical)
D610, D610-PS
D620, D620-PS
Dx10-HiTemp
5 GHz
Dx20-HiTemp
5 GHz
Dx10-QC Tip
4 GHz
Dx20-QC Tip
4 GHz
Dx10-SP Tip
3 GHz
Dx10-SI and
Dx10-PT Tips
75 ps (typical)
Dx20-SP Tip
3 GHz
Dx20-SI and
Dx20-PT Tips
75 ps (typical)
Dx10-HiTemp
90 ps (typical)
Dx20-HiTemp
90 ps (typical)
Dx10-QC Tip
122.5 ps (typical)
Dx20-QC Tip
122.5 ps (typical)
Dx10-QC Tip
122.5 ps (typical)
Dx20-QC Tip
122.5 ps (typical)
Dx10-SP Tip
150 ps (typical)
Dx20-SP Tip
150 ps (typical)
Dx10-SP Tip
150 ps (typical)
Dx10-SI and
Dx10-PT Tips
56 ps (typical)
Dx20-SP Tip
150 ps (typical)
Dx20-SI and
Dx20-PT Tips
56 ps (typical)
Dx10-HiTemp
67.5 ps (typical)
Dx20-HiTemp
67.5 ps (typical)
Dx10-QC Tip
92 ps (typical)
Dx20-QC Tip
92 ps (typical)
Dx10-QC Tip
92 ps (typical)
Dx20-QC Tip
92 ps (typical)
Dx10-SP Tip
113 ps (typical)
Dx20-SP Tip
113 ps (typical)
Dx10-SP Tip
113 ps (typical)
<36 nV/√Hz
(2.8 mVrms) (typical)
Referred to input,
6 GHz bandwidth
Dx20-SP Tip
113 ps (typical)
<61 nV/√Hz
(4.8 mVrms) (typical)
Referred to input,
6 GHz bandwidth
<36 nV/√Hz
(2.3 mVrms) (typical)
Referred to input,
4 GHz bandwidth
<67 nV/√Hz
(4.3 mVrms) (typical)
Referred to input,
4 GHz bandwidth
2.5Vpk-pk, ±1.25V
5Vpk-pk, ±2.5V
2.5Vpk-pk, ±1.25V
5Vpk-pk, ±2.5V
Dx10-SI and
Dx10-PT Tips
6 GHz
Dx20-SI and
Dx20-PT Tips
6 GHz
D410, D410-PS
D420, D420-PS
Dx10-SP Tip
3 GHz
Dx20-SP Tip
3 GHz
D600A-AT
D400A-AT
<75 ps (typical)
<112 ps (typical)
56 ps (typical)
84 ps (typical)
<74 nV/√Hz
(5.8 mVrms) (typical)
Referred to input,
6 GHz bandwidth
<74 nV/√Hz
(4.1 mVrms) (typical)
Referred to input,
4 GHz bandwidth
Dx10-SI, Dx10-HiTemp,
Dx20-SI, Dx20-HiTemp,
Dx10-QC and Dx10-PT Tips Dx20-QC and Dx20-PT Tips
4 GHz
4 GHz
Dx10-SI, Dx10-HiTemp, and Dx20-SI, Dx20-HiTemp, and
Dx10-PT Tips
Dx20-PT Tips
112 ps (typical)
112 ps (typical)
6 GHz
Dx10-SI, Dx10-HiTemp, and Dx20-SI, Dx20-HiTemp, and
Dx10-PT Tips
Dx20-PT Tips
84 ps (typical)
84 ps (typical)
4.8Vpk-pk, ±2.4V
±4 V
1.7X / 1.0X (nominal)
4 GHz
±2.4 Vmax
±3 V Differential (nominal)
n/a
±20 V
±18 V
3.2X / 1.9X (nominal)
Dx10-SI Lead,
Dx10-HiTemp
>175 Ω Differential†
3.2X / 1.9X (nominal)
1.7X / 1.0X (nominal)
100 kΩ Differential
50 kΩ Common Mode
Dx20-SI Lead,
Dx10-SI Lead,
Dx20-HiTemp
Dx10-HiTemp
†
>250 Ω Differential
>200 Ω Differential†
Dx10-PT Tip
>175 Ω Differential†
Dx20-PT Tip
>175 Ω Differential†
Dx10-PT Tip
>175 Ω Differential†
Dx20-PT Tip
>175 Ω Differential†
Dx10-QC Tip
>125 Ω Differential†
Dx20-QC Tip
>125 Ω Differential†
Dx10-QC Tip
>100 Ω Differential†
Dx20-QC Tip
>100 Ω Differential†
Dx10-SP Tip
>40 Ω Differential†
Dx20-SP Tip
>40 Ω Differential†
Dx10-SP Tip
>40 Ω Differential†
Dx20-SP Tip
>40 Ω Differential†
Dx20-SI Lead,
Dx20-HiTemp
>350 Ω Differential†
2.5X
4 kΩ Differential
2 kΩ Common Mode
>200 Ω Differential
>450 Ω Differential
through entire
frequency range
* All bandwidth and rise time measurements are made with an oscilloscope bandwidth greater or equal to the probe bandwidth
† Through entire frequency range
Product Description
Complete Probe Systems
4 GHz Complete Probe System with Dx10-SI Solder-In Tip (Qty. 1),
Dx10-SP Square Pin (Qty. 1), Dx10-QC Quick Connect (Qty. 1), and
Dx10-PT-KIT Positioner Tip Browser (Qty. 1)
4 GHz Complete Probe System with Dx20-SI Solder-In Tip (Qty. 1),
Dx20-SP Square Pin (Qty. 1), Dx20-QC Quick Connect (Qty. 1), and
Dx20-PT-KIT Positioner Tip Browser (Qty. 1)
6 GHz Complete Probe System with Dx10-SI Solder-In Tip (Qty. 1),
Dx10-SP Square Pin (Qty. 1), Dx10-QC Quick Connect (Qty. 1), and
Dx10-PT-KIT Positioner Tip Browser (Qty. 1)
6 GHz Complete Probe System with Dx20-SI Solder-In Tip (Qty. 1),
Dx20-SP Square Pin (Qty. 1), Dx20-QC Quick Connect (Qty. 1), and
Dx20-PT-KIT Positioner Tip Browser (Qty. 1)
Amplifier and Probe Tip Modules
WaveLink D410 4 GHz/2.5Vp-p Differential Probe Amplifier with
Dx10-SI Solder-In Tip (Qty. 1), Dx10-SP Square Pin (Qty. 1), and
Dx10-QC Quick Connect (Qty. 1)
WaveLink D420 4 GHz/5Vp-p Differential Probe Amplifier with
Dx20-SI Solder-In Tip (Qty. 1), Dx20-SP Square Pin (Qty. 1), and
Dx20-QC Quick Connect (Qty. 1)
WaveLink D610 6 GHz/2.5Vp-p Differential Probe Amplifier with
Dx10-SI Solder-In Tip (Qty. 1), Dx10-SP Square Pin (Qty. 1), and
Dx10-QC Quick Connect (Qty. 1)
WaveLink D620 6 GHz/5Vp-p Differential Probe Amplifier with
Dx20-SI Solder-In Tip (Qty. 1), Dx20-SP Square Pin (Qty. 1),
Dx20-QC Quick Connect (Qty. 1)
Product Code
D410-PS
Product Description
Product Code
Amplifier and Probe Tip Modules (cont’d)
WaveLink D300A-AT 4 GHz/4.8Vp-p Differential Amplifier
Module with Adjustable Tip
D400A-AT
D420-PS
WaveLink D600A-AT 6 GHz/4.8Vp-p Differential Amplifier
Module with Adjustable Tip
D600A-AT
D610-PS
Positioner Tip (Browser) Kits
D620-PS
WaveLink Dx10-PT Adjustable Positioner Tip Kit.
For use with Dx10 amplifiers.
WaveLink Dx20-PT Adjustable Positioner Tip Kit.
For use with Dx20 amplifiers.
Dx10-PT-KIT
Dx20-PT-KIT
Probe Platform/Cable Assemblies and Adapters
D410
D420
WaveLink ProLink Platform/Cable Assembly Kit with
complete soft carrying case for all probe items.
WaveLink ProBus Platform/Cable Assembly Kit with
complete soft carrying case for all probe items.
WL-PLINK-CASE
WL-PBUS-CASE
Hi-Temp Leads
D610
D620
WaveLink Temperature Extension Cables for Dx10.
Includes set of Matched 30" High Temperature Cables (Qty. 1)
and solder-in lead set (Qty. 1)
WaveLink Temperature Extension Cables for Dx20.
Includes set of Matched 30" High Temperature Cables (Qty. 1)
and solder-in lead set (Qty. 1)
Dx10-HiTemp
Dx20-HiTemp
17
WAVELINK MEDIUM BANDWIDTH DIFFERENTIAL PROBES
®
General Purpose Probe with Range of Capabilities
Teledyne LeCroy’s WaveLink 8-13 GHz Differential Probes are a medium
bandwidth, general purpose probing solution with high input dynamic range
and offset range capability. These probes support solder-in, positioner
(browser), square pin and SMA/SMP cabled tip/lead connections. The range
of capabilities is ideal for a variety of high speed DDR signals where high
dynamic range and large offset requirements are common.
Teledyne LeCroy WaveLink
Medium Bandwidth Differential
Probe and Accessory
Model Numbers:
D830
D830-PS
D1030
D1030-PS
D1330
COLOR DWG FOR DATASHEET
D1330-PS
WL-PLINK-CASE
Dxx30-PT-KIT
Dxx30-SMA-SMP-LEADS
Features and Benefits
• Choice of 8, 10, or 13 GHz bandwidth models
•• 3.5 Vpk-pk dynamic range
• ±4 V offset range
• Ideal for DDR3, DDR4, LPDDR3
• Deluxe soft carrying case
• Wide variety of tips and leads
– Solder-In Lead
– Positioner (Browser) Tip
– SMA/SMP Lead
– Square Pin Lead
• SMA/SMP lead set accessory does not require purchase
of a different amplifier
LabMaster 9 Zi-A/10 Zi
WaveMaster/SDA/DDA 8 Zi/Zi-A
WavePro/SDA/DDA 7 Zi/Zi-A
WL-PLINK-CASE
Platform/Cable Assembly
(Included in Dxx30-PS)
D830
8GHz
Differential
Amplifier
D1030
10GHz
Differential
Amplifier
D1330
13GHz
Differential
Amplifier
Dxx30-SMA-SMP
Dxx30-SI
SMA/SMP Lead Set
Solder-In Lead (Qty. 2)
Dxx30-PT
(Optional)
Positioner Tip Browser
(Included in Dxx30-PS)
18
Dxx30-SP
Square Pin
WAVELINK MEDIUM BANDWIDTH DIFFERENTIAL PROBES
®
D830, D830-PS
D1030, D1030-PS
D1330, D1330-PS
Dxx30-SI and Dxx30-SMA-SMP Tips
13 GHz (probe only, guaranteed)
13 GHz (system bandwidth,
when used with 813Zi/Zi-A, typical)
Dxx30-SI, Dxx30-SMA-SMP, and
Dxx30-PT Tips
8 GHz (probe only, guaranteed)
8 GHz (system bandwidth,
when used with 808Zi/Zi-A, typical)
Dxx30-SI, Dxx30-SMA-SMP, and
Dxx30-PT Tips
10 GHz (probe only, guaranteed)
10 GHz (system bandwidth,
when used with 813Zi/Zi-A, typical)
Dxx30-SP Tip
3 GHz (probe only, guaranteed)
3 GHz (system bandwidth,
when used with 808Zi/Zi-A, typical)
Dxx30-SP Tip
3 GHz (probe only, guaranteed)
3 GHz (system bandwidth,
when used with 813Zi/Zi-A, typical)
Dxx30-SI, Dxx30-SMA-SMP, and
Dxx30-PT Tips
50 ps (typical)
System rise time measured
with ≥8 GHz oscilloscope
Dxx30-SI, Dxx30-SMA-SMP, and
Dxx30-PT Tips
40 ps (typical)
System rise time measured
with ≥13 GHz oscilloscope
Dxx30-SP Tip
132 ps (typical)
System rise time measured
with ≥8 GHz oscilloscope
Dxx30-SP Tip
132 ps (typical)
System rise time measured
with ≥13 GHz oscilloscope
Dxx30-SI, Dxx30-SMA-SMP, and
Dxx30-PT Tips
37.5 ps (typical)
System rise time measured
with ≥8 GHz oscilloscope
Dxx30-SI, Dxx30-SMA-SMP, and
Dxx30-PT Tips
30 ps (typical)
System rise time measured
with ≥13 GHz oscilloscope
Dxx30-SP Tip
100 ps (typical)
System rise time measured
with ≥8 GHz oscilloscope
Dxx30-SP Tip
100 ps (typical)
System rise time measured
with ≥13 GHz oscilloscope
Noise (Probe)
<48 nV/√Hz (4.3 mVrms) (typical)
Referred to input, 8 GHz bandwidth.
<48 nV/√Hz (4.8 mVrms) (typical)
Referred to input, 10 GHz bandwidth.
Dxx30-SP Tip
100 ps (typical)
System rise time measured
with ≥13 GHz oscilloscope
<48 nV/√Hz (5.5 mVrms) (typical)
Referred to input, 13 GHz bandwidth.
Noise (System)
<52 nV/√Hz (4.6 mVrms) (typical)
Referred to input, 8 GHz bandwidth.
<52 nV/√Hz (5.2 mVrms) (typical)
Referred to input, 10 GHz bandwidth.
<52nV/√Hz (5.9 mVrms) (typical)
Referred to input, 13 GHz bandwidth.
Bandwidth
Rise Time (10–90%)
Rise Time (20–80%)
Input
Input Dynamic Range
Input Common Mode Voltage Range
Input Offset Voltage Range
Non-destructive Input Range
Attenuation
DC Input Resistance (Nominal)
Dxx30-SP Tip
3 GHz (probe only, guaranteed)
3 GHz (system bandwidth,
when used with 813Zi/Zi-A, typical)
Dxx30-SI and Dxx30-SMA-SMP Tips
35 ps (typical)
System rise time measured
with ≥13 GHz oscilloscope
Dxx30-PT Tip
40 ps (typical)
System rise time measured
with ≥13 GHz oscilloscope
Dxx30-SP Tip
132 ps (typical)
System rise time measured
with ≥13 GHz oscilloscope
Dxx30-SI and Dxx30-SMA-SMP Tips
26 ps (typical)
System rise time measured
with ≥13 GHz oscilloscope
Dxx30-PT Tip
30 ps (typical)
System rise time measured
with ≥13 GHz oscilloscope
3.5Vpk-pk, ±1.75V (nominal)
±5 V (nominal)
±4 V Differential (nominal)
±15 V (nominal)
3.75x (nominal)
200 kΩ Differential
50 kΩ Common mode
>250 Ω Differential through entire frequency range using SI tip
Impedance (Zmin, Typical)
Impedance (Mid-Band, Typical)
Dxx30-PT Tip
10 GHz (probe only, guaranteed)
10 GHz (system bandwidth,
when used with 813Zi/Zi-A, typical)
Dxx30-SI Lead
470 Ω at 4 GHz, 320 Ω at 6 GHz, 260 Ω at 8 GHz, 250 Ω at 9 GHz, 260 Ω at 10 GHz, 350 Ω at 13 GHz
Dxx30-PT Tip
155 Ω at 4 GHz, 210 Ω at 6 GHz, 140 Ω at 8 GHz, 80 Ω at 9 GHz, 40 Ω at 10 GHz
Product Description
Complete Probe Systems
8 GHz Complete Probe System with Dxx30-SI Solder-In Tip (Qty.
2), Dxx30-SP Square Pin (Qty. 1), and
Dxx30-PT-KIT Positioner Tip Browser (Qty. 1)
10 GHz Complete Probe System with Dxx30-SI Solder-In Tip
(Qty. 2), Dxx30-SP Square Pin (Qty. 1), and
Dxx30-PT-KIT Positioner Tip Browser (Qty. 1)
13 GHz Complete Probe System with Dxx30-SI Solder-In Tip
(Qty. 2), Dxx30-SP Square Pin (Qty. 1), and
Dxx30-PT-KIT Positioner Tip Browser (Qty. 1)
Amplifier and Probe Tip Modules
WaveLink D830 8 GHz/3.5Vp-p Differential Probe
Amplifier with Dxx30-SI Solder-In Tip (Qty. 2) and
Dxx30-SP Square Pin (Qty. 1)
WaveLink D1030 10 GHz/3.5Vp-p Differential Probe
Amplifier with Dxx30-SI Solder-In Tip (Qty. 2) and
Dxx30-SP Square Pin (Qty. 1)
WaveLink D1330 13 GHz/3.5Vp-p Differential Probe
Amplifier with Dxx30-SI Solder-In Tip (Qty. 2) and
Dxx30-SP Square Pin (Qty. 1)
Product Code
D830-PS
D1030-PS
D1330-PS
D830
Product Description
Positioner Tip (Browser) Kits
WaveLink Dxx30-PT (up to 10 GHz rating) Adjustable
Positioner Tip Kit. For use with Dxx30 amplifiers.
Probe Platform/Cable Assemblies and Adapters
WaveLink ProLink Platform/Cable Assembly Kit with
complete soft carrying case for all probe items.
D1330
Dxx30-PT-KIT
WL-PLINK-CASE
SMA/SMP Lead Set
Lead set consisting of WaveLink
Dxx30-SMA-SMP-LEADS for use
with Dxx30 amplifiers.
Accessories
Cascade Microtech EZ-Probe Positioner
D1030
Product Code
Probe Deskew and Calibration Test Fixture
Calibration Options
NIST Calibration for D830. Includes test data.
NIST Calibration for D1030. Includes test data.
NIST Calibration for D1330. Includes test data.
Dxx30-SMA-SMP-LEADS
EZ PROBE
TF-DSQ
D830-CCNIST
D1030-CCNIST
D1330-CCNIST
19
WAVELINK HIGH BANDWIDTH DIFFERENTIAL PROBES
®
Ultra-wideband Architecture for Superior Signal Fidelity
Teledyne LeCroy’s WaveLink® high bandwidth differential probes utilize
advanced differential traveling wave (distributed) amplifier architecture
to achieve superior high frequency true analog broadband performance.
Traveling wave (distributed) amplifiers are commonly used in ultra high
frequency broadband amplifiers. This multi-stage amplifier architecture
maximizes gain per stage and minimizes probe attenuation, which provides
very low probe noise and fast rise times.
Features & Benefits
Teledyne LeCroy
WaveLink High Bandwidth
Differential Probe
and Accessory
Model Numbers:
D1305-A
D1305-A-PS
D1605-A
D1605-A-PS
D2005-A
D2005-A-PS
D2505-A
D2505-A-PS
WL-PLINK-A-CASE
WL-2.92MM-CASE
LPA-2.92
• Up to 25 GHz bandwidth (probe + oscilloscope)
• System rise time as fast as 13 ps (20–80%)
• Highest bandwidth Solder-In solution (25 GHz)
• Ultra-compact browsertip (22 GHz)
• Superior probe impedance minimizes AC loading on device under
test (DUT)
±4 V common mode range
±2.5 V offset range
2.0 Vpk-pk dynamic range
• Carbon-composite browser tips optimize signal fidelity and loading
• Probe noise as low as 14 nV/√Hz (1.6 Vrms)
• Low probe attenuation
• Large operating voltage range
•
Long length Solder-In tip with field replaceable resistors
LabMaster 10 Zi
LabMaster 9 Zi-A
WaveMaster 8 Zi/Zi-A
SDA11000
SDA13000
SDA18000
LPA-2.92
LPA 2.92 to ProLink Adapter:
WL-2.92MM
Platform/Cable
Assembly
(included in
D2x05-A-PS)
WL-PLINK-A
Platform/Cable
Assembly:
(included in
D1x05-A-PS)
D1305-A
13 GHz
D1605-A
16 GHz
D2005-A
20 GHz
Dxx05-SI
Solder-In Lead
20
D2505-A
25 GHz
Differential Amplifier
Dxx05-PT
Positioner Tip
Browser
WAVELINK HIGH BANDWIDTH DIFFERENTIAL PROBES
®
Bandwidth
D1305-A, D1305-A-PS
D1605-A, D1605-A-PS
D2005-A, D2005-A-PS
D2505-A, D2505-A-PS
Dxx05-SI and Dxx05-PT Tips
13 GHz (probe only, guaranteed)
13 GHz (system bandwidth,
when used with 813Zi, typical)
Dxx05-SI and Dxx05-PT Tips
16 GHz (probe only, guaranteed)
16 GHz (system bandwidth,
when used with 816Zi, typical)
Dxx05-SI and Dxx05-PT Tips
20 GHz (probe only, guaranteed)
20 GHz (system bandwidth,
when used with 820Zi, typical)
Dxx05-SI Lead
25 GHz (probe only, guaranteed)
25 GHz (system bandwidth,
when used with 825Zi, typical)
Dxx05-PT Tip
22 GHz (system bandwidth,
when used with 825Zi, typical)
20 GHz (probe only, guaranteed)
Dxx05-SI Lead
17.5 ps (typical)
System rise time measured with
≥ 25 GHz oscilloscope
Dxx05-PT Tip
19 ps (typical)
System rise time measured with
≥ 25 GHz oscilloscope
Dxx05-SI Lead
13 ps (typical)
System rise time measured with
≥ 25 GHz oscilloscope
Dxx05-PT Tip
14 ps (typical)
System rise time measured with
≥ 25 GHz oscilloscope
Rise Time (10–90%)
Dxx05-SI and Dxx05-PT Tips
32.5 ps (typical)
System rise time measured
with ≥ 13 GHz oscilloscope)
Dxx05-SI and Dxx05-PT Tips
28 ps (typical)
System rise time, measured
with ≥ 16 GHz oscilloscope
Dxx05-SI and Dxx05-PT Tips
20 ps (typical)
System rise time measured
with ≥ 20 GHz oscilloscope
Rise Time (20–80%)
Dxx05-SI and Dxx05-PT Tips
24.5 ps (typical)
System rise time measured
with ≥ 13 GHz oscilloscope
Dxx05-SI and Dxx05-PT Tips
21 ps (typical)
System rise time measured
with ≥ 16 GHz oscilloscope
Dxx05-SI and Dxx05-PT Tips
15 ps (typical)
System rise time measured
with ≥ 20 GHz oscilloscope
Noise (Probe)
< 14 nV/√Hz (1.6 mVrms)
(typical)
Referred to input,
13 GHz bandwidth
< 14 nV/√Hz (1.8 mVrms)
(typical)
Referred to input,
16 GHz bandwidth
< 18 nV/√Hz (2.5 mVrms)
(typical)
Referred to input,
20 GHz bandwidth
< 18 nV/√Hz (2.8 mVrms)
(typical)
Referred to input,
25 GHz bandwidth
Noise (System)
< 23 nV/√Hz (2.7 mVrms)
(typical) Referred to input,
13 GHz bandwidth
< 23 nV/√Hz (2.9 mVrms)
(typical) Referred to input,
16 GHz bandwidth
< 28 nV/√Hz (4.0 mVrms)
(typical) Referred to input,
20 GHz bandwidth
< 28 nV/√Hz (4.5 mVrms)
(typical) Referred to input,
25 GHz bandwidth
Input
Input Dynamic Range
2.0 Vpk-pk, (±1.0 V) (nominal)
Input Common Mode Voltage Range
±4 V (nominal)
Input Offset Voltage Range
±2.5 V Differential (nominal)
Non-destructive Input Range
Attenuation
±10 V (nominal)
3.5x (nominal)
DC Input Resistance (Nominal)
Product Description
Complete Probe Systems
13 GHz Complete Probe System with Solder-In Tip
(13 GHz) and Positioner Tip Browser (13 GHz)
16 GHz Complete Probe System with Solder-In Tip
(16 GHz) and Positioner Tip Browser (16 GHz)
20 GHz Complete Probe System with Solder-In Tip
(20 GHz) and Positioner Tip Browser (20 GHz)
25 GHz Complete Probe System with Solder-In Tip
(25 GHz) and Positioner Tip Browser (22 GHz)
1.1 kΩ Differential
100 kΩ Common mode
Product Code
D1305-A-PS
D1605-A-PS
D2005-A-PS
D2505-A-PS
Amplifier and Probe Tip Modules
WaveLink D1305 13 GHz/1.6 Vpk-pk Differential Probe
Amplifier with Dxx05-SI Solder-In Tip (Qty. 2)
WaveLink D1605 16 GHz/1.6 Vpk-pk Differential Probe
Amplifier with Dxx05-SI Solder-In Tip (Qty. 2)
WaveLink D2005 20 GHz/1.6 Vpk-pk Differential Probe
Amplifier with Dxx05-SI Solder-In Tip (Qty. 2)
WaveLink D2505 25 GHz/1.6 Vpk-p Differential Probe
Amplifier with Dxx05-SI Solder-In Tip (Qty. 2)
D1305-A
D1605-A
D2005-A
D2505-A
Positioner Tip (Browser) Kits
WaveLink Dxx05-PT (Up to 22 GHz Rating) Adjustable
Positioner Tip Kit. For use with Dxx05 Amplifiers
4.5x (nominal)
Dxx05-PT-KIT
Product Description
Accessories
Cascade Microtech EZ-Probe Positioner
Probe Deskew and Calibration Test Fixture
Product Code
EZ PROBE
TF-DSQ
Calibration Options
NIST Calibration for D1305. Includes Test Data
NIST Calibration for D1605. Includes Test Data
NIST Calibration for D2005. Includes Test Data
NIST Calibration for D2505. Includes Test Data
D1305-A-CCNIST
D1605-A-CCNIST
D2005-A-CCNIST
D2505-A-CCNIST
Replacement Parts
Replacement Dxx05-SI 13–25 GHz Solder-In Lead with
Qty. 5 Spare Resistors
Replacement SI Resistor Kit for Dxx05-SI Solder-In Tip
Replacement Dxx05-PT Positioner Tip
Qty. 4 Replacement Carbon Composite Pogo-pin Tips
Replacement Probe Tip Holder Kit
Replacement Platform/Cable Assembly Mounting Kit
Qty. 1 Package of Black Adhesive Pads (10/pkg.) and
Qty. 1 Package of White Adhesive Pads (10/pkg.)
Qty. 1 Package of Adhesive Probe Connection Guides (200
individual guides/package)
Dxx05-SI
Dxx05-SI-RESISTORS
Dxx05-PT
Dxx05-PT-TIPS
PK600ST-3
PK600ST-4
Dxx0-PT-TAPE
Dxx05-PT-GUIDES
Probe Platform/Cable Assemblies and Adapters
WaveLink ProLink Platform/Cable Assembly Kit
for ≥ 13 GHz WaveLink Probes
WaveLink 2.92 mm Platform/Cable Assembly Kit
for ≥ 20 GHz WaveLink Probes
ProLink to 2.92 mm Adapter with Probe Power
and Communication Pass Through
WL-PLINK-A-CASE
WL-2.92MM-CASE
LPA-2.92
21
DIFFERENTIAL PROBES
Teledyne LeCroy
Differential Probes
Model Numbers:
AP033
AP034
AP033
AP034
AP033 and AP034
High bandwidth, excellent common-mode rejection ratio (CMRR) and low
noise make these active differential probes ideal for applications such as disk
drive design and failure analysis, as well as wireless and data communication
design. With the ProBus interface, the AP034 and AP033 become an integral
part of the oscilloscope, allowing sensitivity, offset and common-mode range
to be displayed on the scope screen. Common mode sensing and input
protection capabilities of the AP033 add additional functionality.
Features for both probes:
•
•
•
•
•
•
•
•
•
22
500 MHz bandwidth (AP033)
1 GHz bandwidth (AP034)
x10 gain to ÷ 10 attenuation range (AP033)
10,000:1 DC CMRR
Low 9 nV/√Hz noise (AP033)
1.5 pF/side input C (AP034)
200 µV/div (AP033)
Input ESD protection
Autozero feature
DIFFERENTIAL PROBES
Specifications
AP033
AP034
Bandwidth
500 MHz
1 GHz
Gain
x10, x1, ÷10 (÷100 with
plug-on ÷10 attenuator)
x1 (÷10 and ÷20 with
plug-on attenuators)
DC Accuracy
1% in x1 without
external attenuator
2% typical (probe only)
Input Resistance
1 MΩ each input to ground
1 MΩ II 1.5 pF each input to ground
2 MΩ differential between inputs
2 MΩ ll 0.85 pF between inputs
Differential Mode Range
±400 mV (x1)
±40 mV (x10)
±4 V (÷10)
±40 V (÷100)
±400 mV (x1)
±4 V (÷10)
±8 V (÷20)
Offset Range
±400 mV (x1, x10)
±4 V (±10)
±40 V (±100)
±1.6 V (x1)
±16 V (±10)
±32 V (±20)
Common-Mode Range
±42 V peak (±10)
+4.2 V peak (±100)
±16 V (x1)
±42 V (±10)
+42 V (±20)
CMRR
70 Hz 10,000:1 (80 dB)
100 kHz 10,000:1 (80 dB)
1 MHz 1000:1 (60 dB)
10 MHz 100:1 (40 dB)
250 MHz 5:1 (14 dB)
70 Hz 10,000:1 (80 dB)
1 MHz 100:1 (40 dB)
100 MHz 18.1 (25 dB)
500 MHz 9:1 (19 dB)
Ordering Information
Product Description
500 MHz Differential Probe
1 GHz Differential Probe
Product Code
AP033
AP034
23
HIGH VOLTAGE DIFFERENTIAL PROBES
24
HIGH VOLTAGE DIFFERENTIAL PROBES
Teledyne LeCroy
High Voltage
Differential Probe
Model Numbers:
Differential active probes are like two probes in one. Instead of
measuring a test point in relation to a ground point (like singleended active probes), differential probes measure the difference in
AP031
ADP300
ADP305
voltage of a test point in relation to another test point.
Opposite page:
ADP305 High Voltage Differential Probe
25
HIGH VOLTAGE DIFFERENTIAL PROBES
The AP031 is a low cost, battery operated active differential probe intended
for measuring higher voltages. The differential techniques employed permit
measurements to be taken at two points in a circuit without reference to the
ground, allowing the oscilloscope to be safely grounded without the use of
opto-isolators or isolating transformers.
Features
Teledyne LeCroy
High Voltage
Differential Probes
Model Numbers:
AP031
ADP300
ADP305
•
•
•
•
Safe floating measurements
15 MHz bandwidth
700 V maximum input voltage
Works with any 1 MΩ input oscilloscope
AP031 Specifications
Attenuation
Bandwidth
Input R
Differential Mode Range
Common Mode Range
CMRR
Power Requirements: four AA batteries
26
÷10 / ÷100
15 MHz
4 MΩ
±70 V / ±700 V DC + Peak AC
±700 V DC + Peak AC
86 dB @ 50 Hz
56 dB @ 200 kHz
HIGH VOLTAGE DIFFERENTIAL PROBES
ADP30X high-voltage active probes are safe, easy-to-use, and
ideally suited for measuring power electronics. The ADP300 is
designed for troubleshooting low-frequency power devices and
other circuits where the reference potential is elevated from the
ground or the location of the ground is unknown. The ADP305 is
designed for measuring the high-speed floating voltages found
in today’s power electronics.
Features
•
•
•
•
20 MHz and 100 MHz bandwidth
1,000 Vrms common mode voltage
1,400 Vpeak differential voltage
EN 61010 CAT III
•
•
•
80 dB CMRR at 50/60 Hz
ProBus system
Full remote control
ADP30X Specifications
Electrical Characteristics
Bandwidth
Differential Voltage
Common Mode Voltage
Low-Frequency Accuracy (Probe Only)
CMRR
Max. Slew Rate (Referenced to Input)
AC Noise (Referenced to Input)
Attenuation Input Impedance
Sensitivity
Interface
20 MHz (ADP300)
100 MHz (ADP305)
1,400 V peak
1,000 V rms CAT III
1% of Reading
50/60 Hz
80 dB (10,000:1)
100 kHz
50 dB (300:1)
60,000 V/µs (ADP300)
300,000 V/µs (ADP305)
50 mV rms
÷100/÷1000 (automatically selected by scope)
Between inputs
8 MΩ, 6 pF
Each input to ground 4 MΩ, 1 pF
1 V/div to 350 V/div (ADP300)
200 mV/div to 350 V/div (ADP305)
ProBus, 1 MΩ*
General Characteristics
Overall Length Input Connectors Operating Temperature Warranty 2m
4 mm Shrouded Banana Plug
0 ˚C to 50 ˚C
1 year
*Requires AP-1M for oscilloscopes with 50 Ω only inputs
Ordering Information
Product Description
700 V, 15 MHz Differential Probe (÷10, ÷100)
1,400 V, 20 MHz High-Voltage Differential Probe
1,400 V, 100 MHz High-Voltage Differential Probe
Product Code
AP031
AP300
AP305
27
DIFFERENTIAL AMPLIFIERS
28
DIFFERENTIAL AMPLIFIERS
Teledyne LeCroy
Differential Amplifier
and Accessory
Model Numbers:
Differential amplifiers are intended to act as signal conditioning preamplifiers
for oscilloscopes and network and spectrum analyzers, providing differential
measurement capability to instruments having only a single-ended input. The
“-PR2” version of each amplifier is a dual channel unit. The DXC series
differential input cables are matched to the characteristics of the amplifier.
DA1855A
DA1855-PR2
DA1855A-RM
DA1855A-PR2-RM
DSC5100
DXC100A
DXC200
DA101
Opposite page:
DA1855A Differential Amplifier working with the
HDO6000 oscilloscope for power measurement.
29
DIFFERENTIAL AMPLIFIERS
Teledyne LeCroy
Differential Amplifier
and Accessory
Model Numbers:
DA1855A
DA1855-PR2
DA1855A-RM
DA1855A-PR2-RM
DSC5100
DXC100A
DXC200
DA101
DA1855A
The DA1855A is a stand-alone, high-performance 100 MHz differential
amplifier. It is intended to act as a signal conditioning preamplifier for
oscilloscopes, digitizers and spectrum analyzers, providing differential
measurement capability to instruments having only a single-ended input.
When used with a DA1855A, oscilloscopes can obtain Common Mode
Rejection Ratio (CMRR) and overdrive recovery performance levels
previously unobtainable.
Amplifier gain can be set to 1 or 10. A built-in input attenuator can be
separately set to attenuate signals by a factor of 10, providing gains of
10, 1, or 0.1 and common mode dynamic range of ±15.5 V (÷1) or ±155 V
(÷10). Optional probes increase the maximum input signal and common
mode ranges in proportion to their attenuation ratio but do not exceed their
maximum input voltage rating. Effective gain of the DA1855A, including probe
attenuation, amplifier gain and attenuator settings, is automatically displayed.
The DA1855A features a built-in Precision Voltage Generator (PVG) that can
be set to any voltage between ±15.5 V (±10 V in Differential Offset) with up to
100 µV resolution. The PVG’s output can be selected as an input to the
inverting (-) input of the amplifier for operation as a differential comparator,
or applied internally as a true differential offset voltage independent of
oscilloscope offset. The differential amplifier is also available in a 2 channel
model. In addition, a rackmount is available for each model for easy
installation with other instruments.
30
DIFFERENTIAL AMPLIFIERS
DXC100A
÷100 or ÷10 Selectable, 250 MHz Passive Differential Probe Pair
•DC to 100 MHz Bandwidth with DA1855A
DC to 10 MHz Bandwidth with DA1822
• Max Input Voltage 500 V
•Selectable 10 or 100 Attenuation Factor
• 1.2 m Cable Length
DXC200
÷1, 50 MHz, Passive Differential Probe Pair
•DC to 50 MHz with DA1855A
DC to 10MHz with DA1822A
•Max Input Voltage 500 V (Limited to Amplifier Max Input Voltage)
• x1 Differential Probe Pair
• 0.7 m Cable Length
DXC-5100
÷100, 2.5KV Passive High Voltage Probe Pair. Requires DA101 for full performance
DA101
÷10, 1MΩ Passive Attenuator for DXC series probes
Ordering Information
Product Description
Product Code
1 Ch, 100 MHz Differential Amplifier with Precision Voltage Source
2 Ch,100 MHz Differential Amplifier with Precision Voltage Source
DA1855A with Rackmount
DA1855A with Rackmount (must be ordered at time of purchase, no retrofit)
÷100 or ÷10 Selectable, 250 MHz Passive Differential Probe Pair
÷1, 50 MHz Passive Differential Probe Pair
÷100, 250 MHz 2.5 kV, High Voltage Probe Pair (requires DA101 for full performance)
÷10 1 MΩ Passive Attenuator for DXC Series Probes
DA1855A
DA1855A-PR2
DA1855A-RM
DA1855A-PR2-RM
DXC100A*
DXC200*
DXC-5100*
DA101*
*Must be used with DA Series Differential Amplifiers
31
HIGH VOLTAGE PROBES
32
32
HIGH VOLTAGE PROBES
Teledyne LeCroy
High Voltage Probe
Model Numbers:
The PPE series of probes are suitable for a wide range of applications
where high-voltage measurements must be made safely and accurately.
There are four fixed-attenuation probes covering a range from 2 kV to
6 kV, and one switchable probe providing ÷10/÷100 attenuation for
voltage inputs up to 1.2 kV.
PPE1.2KV
PPE2KV
PPE4KV
PPE5KV
PPE6KV
New technology which utilizes hybrid circuitry (and switch reading for
probes with switchable gain/attenuation) minimizes ringing and overshoot
to provide a precise response.
Opposite page:
PPE Series High Voltage Probe
33
HIGH VOLTAGE PROBES
The PPE series includes four fixed-attenuation probes covering a range from
2 kV to 6 kV, and one switchable probe providing ÷10/÷100 attenuation for
voltage inputs up to 1.2 kV. All fixed-attenuation, standard probes automatically
rescale compatible Teledyne LeCroy oscilloscopes for the appropriate
attenuation of the probe.
Teledyne LeCroy
High Voltage Probe
Model Numbers:
PPE1.2KV
PPE2KV
PPE4KV
PPE5KV
PPE6KV
34
Features
•
•
Safe, accurate high-voltage measurement
1.2 kV to 6 kV
High-Voltage Probes Selection Guide Specifications
Types
PPE1.2kV*
PPE2kV*
PPE4kV*
PPE5kV*
PPE6kV*
Bandwidth Input R Input C Attenuation Maximum Probe Cable
(MHz)(Ω)(pF)
Voltage Encoding
400
50 M
< 6
÷10 / ÷100 600 V/1.2 kV
No
2m
400
50 M
< 6
÷100
2 kV
Yes
2m
400
50 M
< 6
÷100
4 kV
Yes
2m
400
50 M
< 6
÷100
5 kV
Yes
2m
400
50 M
< 6
÷1000
6 kV
Yes
2m
HIGH VOLTAGE PROBES
Trimming Tool
Security Ground Lead
Ground Lead
(22 cm)
Flexible 4 mm
Security Adapter
BNC Adapter
Insulating Tip
IC Insulating Tip
Straight Tip
(0.8 mm)
Spring Contact Tip
(0.8 mm)
Sprung Hook
Crocodile Clip (Black)
Crocodile Clip (Red)
Ordering Information
Product Description
÷10/÷100; 200/300 MHz; 5 MΩ/50 MΩ High-Voltage Probe, 600 V/1.2 kV max. Voltage DC
÷100; 400 MHz; 50 MΩ High-Voltage Probe, 2 kV max. Voltage DC and Peak AC
÷100; 400 MHz; 50 MΩ High-Voltage Probe, 4 kV max. Voltage DC and Peak AC
÷100; 400 MHz; 50 MΩ High-Voltage Probe, 5 kV max. Voltage DC and Peak AC
÷1000; 400 MHz; 50 MΩ High-Voltage Probe, 6 kV max. Voltage DC and Peak AC
Accessory Kit for PPE1.2kV, 2kV, 4kV, 5kV, and 6kV
Sprung Hook (red)
Ground Lead (22 cm)
Crocodile Clip
Probe Tip to BNC Adapter
Spring Tip (0.8 mm)
Rigid Tip V2A
Product Code
PPE1.2KV
PPE2KV
PPE4KV
PPE5KV
PPE6KV
PK103
PK103-1
PP005-G22
PK30x-2
PP005-BNC
PP005-ST8
PP005-RT
Supplied with probe:
*Probe Kit: Trimming tool, ground lead, rigid tip, IC insulator, BNC adapter, tip insulator, spring hook, red crocodile clip.
4 mm safety ground lead, and green/yellow crocodile clip.
† Probe Kit: trimming tool, and ground lead with a crocodile clip.
35
OPTICAL PROBES
36
OPTICAL PROBES
Teledyne LeCroy’s wide-band multi-mode optical-to-electrical converters
are designed for measuring optical communications signals. Their broad
wavelength range and multi-mode input optics make these devices ideal
for applications including Gigabit Ethernet, Fibre Channel, and ITU
telecom standards.
Teledyne LeCroy
Optical Probe
Model Numbers:
OE695G
OE425
OE455
OE525
OE555
The OE695G is compatible with WavePro 7 Zi/Zi-A, WaveMaster 8 Zi/Zi-A,
LabMaster 9 Zi-A, and LabMaster 10 Zi oscilloscopes. Connection to a
real-time Teledyne LeCroy oscilloscope is through the 2.92 mm interface,
with a provided adapter to connect to ProLink interfaces.
The OE425 and OE455 are ProBus modules compatible with
WaveRunner Xi/Xi-A, WaveRunner 6 Zi, WavePro 7 Zi/Zi-A oscilloscopes,
as well as WaveMaster 8 Zi/Zi-A and LabMaster 9 Zi-A when used with
an LPA-BNC adapter. The OE525 and OE555 are ProLink modules
compatible with WavePro 7 Zi/Zi-A, WaveMaster 8 Zi/Zi-A, and
LabMaster 9 Zi-A oscilloscopes.
Opposite page:
OE455 Optical Probe.
37
OPTICAL PROBES
OE695G
Teledyne LeCroy’s OE695G wide-band optical-to-electrical converter is ideal for
measuring optical datacom and telecom signals with data rates from
622 Mb/s to 12.5+ Gb/s. Connection to a real-time Teledyne LeCroy
oscilloscope is through the 2.92mm interface, with a provided adapter to
connect to ProLink interfaces.
Features
• Compatible with Teledyne LeCroy WavePro 7 Zi/Zi-A, WaveMaster 8 Zi/Zi-A,
LabMaster 9 Zi-A, and LabMaster 10 Zi oscilloscopes
Teledyne LeCroy
Optical Probe
Model Numbers:
OE695G
OE425
OE455
OE525
OE555
38
• Frequency range DC to 9.5 GHz (electrical, -3 dB)
• Reference receiver support from 8GFC to 10GFC FEC, or Custom (<12.5Gb/s)
• Full bandwidth mode (no reference receiver applied)
• 62.5/125 µm multi-mode or single-mode fiber input
• +7 dBm (5 mW) max peak optical power
• Low noise (as low as 25 pW/√Hz)
• Ideal for Eye Mask, Extinction Ratio, and Optical Modulation Amplitude
(OMA) testing
Specifications
Optical Wavelength Range
780 to 1550 nm (calibrated range)
750 to 1650 nm (usable range)
Maximum Modulation
Bandwidth
DC to 8.625 GHz (-3 dBe, electrical)
DC to 11.64 GHz (-3 dBo, optical)
(Reference Receiver Applied)
DC to 9.5 GHz (-3 dBe)
DC to 12 GHz (-6 dBe)
DC to 17 GHz (-14 dBe)
(+/-1 dBe passband variations typical, no Reference
Receiver Applied)
Reference Receiver
Uncertainty
±1.6 dBe up to Fref =0.75*bit rate
±4 dBe 2*Fref setting (typical)
±0.85 dBe up to Fref =0.75*bit rate
±4 dBe 2*Fref setting
(on matched oscilloscope input channel 4 with 11, 17,
20, 30, 39, 50, 75, 90, or
100 mV/div gain ranges) with purchase of OE695GREFCAL)
Reference Receiver
Settings
8GFC, OC192/STM64,10GBASE-W,10GBASE-R,
10GFC, ITU-T G.975 FEC, ITU-T G.709 FEC, 10GbE FEC,
10GFC FEC, Custom (622 Mb/s to 12.5 Gb/s),
None (Maximum Bandwidth)
Noise Equivalent Power
25 pW/√Hz @ 1310 nm (typical)
50 pW/√Hz @ 850 nm (typical)
Average noise spectral density 0-10 GHz using most
sensitive vertical scale
Rise Time (10-90%)
33 ps (typical, no reference receiver applied)
Connector Type
FC/PC, compatible with 62.5/125 µm Multi-Mode fiber,
or mechanically compatible Single-Mode fiber
Maximum Optical
Linear Input
(1 dB Compression Point)
-2 dBm (typical), -3 dBm (minimum) at 1550/1310 nm
+4 dBm (typical), +3 dBm (minimum) at 850 nm
Maximum Optical Power
+7 dBm (5 mW) Peak
OPTICAL PROBES
OE425/OE455/OE525/OE555
The O/E converters contain calibration data that can be used to create optical
reference receivers for SONET/SDH (up to OC48/STM16), Fibre Channel, Gigabit
Ethernet, and other optical standards. This feature is available when the O/E is
used on a supported oscilloscope. The universal reference receiver supports any
data rate up to 3 GHz and remains calibrated on any channel of the oscilloscope.
Features
• Frequency range to 5 GHz (6 GHz optical)
•62.5 µm or narrower multi-mode or single-mode
fiber input
•
Broad wavelength range:
– 500–870 nm (OE425, OE525)
– 950–1630 nm (OE455, OE555)
• High responsivity
• Low noise
•Included Accessories:
Multi-mode optical fiber jumper FC-FC
FC to ST adapter
FC to SC adapter
Specifications
OE425/OE525
OE455/OE555
Wavelength Range
500 – 870 nm
460 – 870 nm
(0.1 V/mW)
0.5 V/mW
5 GHz
(6 GHz optical)
2.2 µW rms
2.2 mW
950 – 1630 nm
800 – 1630 nm
(0.1 V/mW)
1.1 V/mW
3.5 GHz
(4.5 GHz optical)
1.0 µW rms
1.0 mW
90 ps
5.5 mW
0.00275 dB / °C
1.1 dB
FC/PC
108 ps
2.5 mW
0.00275 dB / °C
1.1 dB
FC/PC
Conversion Gain
Bandwidth
Equivalent Noise
Maximum Optical Power
(at 5% Saturation)
Rise Time
Maximum Safe Input
Temperature Drift
Frequency Response Ripple
Connector Type
Ordering Information
Product Description
Optical-to-Electrical Converter, 785 to 1550 nm, 2.92 mm connector with ProLink adapter
Optical-to-Electrical Converter, 500–870 nm ProBus BNC Connector
Optical-to-Electrical Converter, 950–1630 nm ProBus BNC Connector
Optical-to-Electrical Converter, 500–870 nm ProLink BMA Connector
Optical-to-Electrical Converter, 950–1630 nm ProLink BMA Connector
Product Code
OE695G
OE425
OE455
OE525
OE555
39
PASSIVE PROBES
40
40
PASSIVE PROBES
Passive probes are the standard probe provided with most oscilloscopes.
Typical passive probes provide a ÷10 attenuation and feature a high
input resistance of 10 MΩ. This high input resistance means that
passive probes are the ideal tool for low frequency signals since circuit
loading at these frequencies is minimized. Passive probes are designed
to handle voltages of at least 400 V, some as high as 600 V. Teledyne
LeCroy passive probes feature an attenuation sense pin which tells the
oscilloscope to scale the waveforms automatically requiring no user input.
Teledyne LeCroy
Passive Probe
Model Numbers:
PP005A
PP006A
PP007-WR-1
PP008-1
PP009-1
PP010-1
PP011-1
PP016
PP017
PP018
41
PASSIVE PROBES
Each passive probe is recommended for a certain oscilloscope, using the
right passive probe with the right oscilloscope means that the probe can
be properly compensated across the entire bandwidth. Using probes with a
different oscilloscope will only let you compensate for low frequencies.
Features
• Bandwidth from 200 MHz to 500 MHz
•Probe encoding ring for automatic scale factor readout on Teledyne
LeCroy oscilloscopes
Passive Probes Selection Guide Specifications
Teledyne LeCroy
Passive Probe
Model Numbers:
PP005A
PP006A
PP007-WR-1
PP008-1
PP009-1
PP010-1
PP011-1
PP016
PP017
PP018
Types
Bandwidth Input R
Input C Attenuation Maximum (MHz)(Ω)(pF) Voltage PP005A
500
10 M
11
÷10
500 V
PP006A
500
10 M
12
÷10
600 V
PP007-WR-1 500
10 M
9.5
÷10
400 V
PP008-1
500
10 M
9.5
÷10
400 V
PP009-1
500
10 M
9.5
÷10
400 V PP010-1
500
10 M
9.5
÷10
400 V
PP011-1
50 10 M
9.5
÷10
400 V
PP016
300 MHz/
10 MΩ/
12 pF/ ÷10/
600 V
10 MHz
1 MΩ
46 pF
÷1
PP017
200 MHz
10 MΩ
12 pF
÷10
600 V
10 MΩ
10 pF
÷10
600 V
PP018
500 MHz
Diameter
(mm)
5
5
2.5
2.5
2.5
2.5
5
5 mm
5 mm
5 mm
Ordering Information
42
Product Description
Product Code
÷10, 500 MHz 10 MΩ Passive Probe
÷10, 500 MHz 10 MΩ Passive Probe
÷10, 500 MHz 10 MΩ Passive Probe
÷10, 500 MHz 10 MΩ Passive Probe
÷10, 500 MHz 10 MΩ Passive Probe
÷10, 200 MHz 10 MΩ Passive Probe
÷10, 500 MHz 10 MΩ Passive Probe ÷10, 300 MHz 10 MΩ Passive Probe
÷10, 250 MHz 10 MΩ Passive Probe
÷10, 500 MHz 10 MΩ Passive Probe
PP005A
PP006A
PP007-WR-1
PP008-1
PP009-1
PP010-1
PP011-1
PP016
PP017
PP018
PASSIVE PROBES
Passive Probe Accessories
for PP005, PP009, and PP011 Series
PK1-5MM-105
IC-Cap 5.0
Insulating Cap
PK1-5MM-103
Adjustment Tool
Protection Cap 5.0
black
4.2 [0.17"]
3.5 [0.14"]
0.4 [0.02"]
PK1-5MM-108
IC-Cap 5.0
2.54 mm pitch; black
PK1-5MM-107
PCB Adapter 5.0
2
K1-5MM-106
Set Coding Rings
3x4 colors
]
8"
,0 "]
[0 ,16
[0
4
PK1-5MM-102
Ground Lead 11 cm
PK1-5MM-104
Rigid Tip 0.8 mm
PK1-5MM-117
Flexible Adapter
5.0 to 5 mm
banana plug
PK1-5MM-101
Sprung Hook II 5.0
black
PK1-5MM-118
Ground Spring 5.0
PK1-5MM-113
Pico hook \U+2122
PK1-5MM-123
HF Compensated
Ground Lead 22 cm
PK1-5MM-109
Spring Tip 0.8 mm
PK1-5MM-122
Ground Lead 22 cm
to 4 mm banana plug
PK1-5MM-116
Flexible Adapter
5.0 to 2 mm
banana plug
PK1-5MM-114Y,
PK1-5MM-114G
QFP IC-Clip 13 mm long
down to 0.5 mm pitch
( X : 4 = yellow; 5 = green )
PK1-5MM-124
Spring Tip 0.38 mm
PK1-5MM-121
Ground Lead 22 cm
to 2 mm banana plug
PK1-5MM-110
BNC Adapter 5.0
PK1-5MM-111
Adapter 5.0 to
0.8 mm socket
PK1-5MM-120
Ground Lead 11
cm to 0.8 mm plug
PK1-5MM-115Y
PK1-5MM-115G
QFP IC-Clip short
down to 0.5 mm pitch
( X : 4 = yellow; 5 = green )
PK1-5MM-112
Dual Adapter
5.0 to 0.8 mm socket
PK1-5MM-119
Ground Lead 11 cm to miniclip
Passive Probe Accessories
for PP007 and PP008 Series
PK007-009
IC Cap
0.65 mm pitch
(blue)
PK007-008
IC Cap
0.5 mm pitch
(green)
PK007-010
IC Cap
0.8 mm pitch
(gray)
PK007-011
IC Cap
1.0 mm pitch
(brown)
PK007-012
IC Cap
1.27 mm pitch
(black)
PK1-5MM-103
Adjustment Tool
PK007-007
Insulating Cap
Protection Cap
PK007-006
Color Coding Rings
(set)
PK007-030
High Frequency
Compensated Ground Lead
PK007-005
Spring Tip 0.5 mm
PK007-001
Sprung Hook
PK007-031
BNC Adapter
PK007-004
Rigid Tip 0.5 mm
PK007-016
Ground Spring
PK007-023
Adapter, 4 mm plug
PK007-015
PCB Adapter
5,8 [0,228]
PK007-013
Ground Blade
PK007-029
Ground Lead with 4 mm plug
,
[0
9]
05
1
5
1,
39
]
PK007-014
10 Copper Pads
( 2 x 2 cm )
[0
,0
PK007-002
Standard Ground Lead
PK007-022
Adapter, 2 mm plug
Device Under
Test
PK007-020
Micro Clip, Long
PK007-017
Single Lead Adapter
PK007-025
Probe Tip Ground Lead
with Alligator Clip
PK007-028
Ground Lead
with 2 mm plug
PK007-026
Ground Lead with
mini clip
PK007-021
Micro Clip, Short
PK007-024
Probe Tip Ground Lead
with 0.8 mm Socket
PK007-018
Dual Lead Adapter
PK007-019
Pico Hook
PK007-027
Ground Lead with 8 mm socket
43
TRANSMISSION LINE PROBES
44
44
TRANSMISSION LINE PROBES
Transmission line probes are a special type of passive probe designed for
use at very high frequencies. They replace the high impedance probe cable
found in a traditional passive probe with a precision transmission line,
Teledyne LeCroy
Transmission Line Probe
Model Numbers:
PP066
PP065
with a characteristic impedance that matches the oscilloscope input
(50 Ω). This greatly reduces the input capacitance to a fraction of a
picofarad, minimizing the loading of high frequency signals. A matching
network at the tip increases the DC input resistance. While they have lower
DC input resistance than a traditional passive probe (usually 500 Ω) to
5 kΩ), the input impedance of these probes remains nearly constant over
their entire frequency range. A traditional ÷10 passive probe will have a
10 MΩ) input impedance at DC, however this impedance drops rapidly
with frequency, passing below the input impedance of a transmission line
probe at less than 100 MHz.
In some applications, transmission line probes offer advantages over
active probes. In addition to being less expensive, their passive design
is more robust to over voltage and ESD exposure. They are useful in
applications producing fast rising, narrow pulses with amplitudes which
exceed the dynamic range of active probes. They also tend to have less
parasitic effects on frequency response. A high BW transmission line
probe driving a sampling oscilloscope can be used as a “golden standard”
in situations when the response of an active probe measurement is
questioned.
Opposite page:
PP066 Transmission Line Probe
45
TRANSMISSION LINE PROBES
Teledyne LeCroy
Transmission Line Probe
Model Numbers:
PP066
PP065
PP066
The PP066 is a high-bandwidth passive probe designed for use with the
WaveMaster and other high-bandwidth oscilloscopes with 50 Ω input
termination. This very low capacitance probe provides an excellent solution for
higher frequency applications, especially the probing of transmission lines with
20–100 Ω impedance. The PP066 accommodates a wide range of
applications, including probing of analog and digital ICs commonly found in
computer, communications, data storage, and other high-speed designs.
Features:
•
•
•
•
Interchangeable attenuator tips
Signal integrity at high bandwidth
Standard SMA cable connection
Ultra low capacitance
PP066 Specifications
Electrical Characteristics
Bandwidth
DC to 7.5 GHz
Risetime
< 47 ps
Input Capacitance
< 0.20 pF
Input Resistance500 Ω (÷10 cartridge)
1000 Ω (÷20 cartridge)
Maximum Voltage
15 V rms
Cable Length
1m
Included with PP0066
PACC-AD001
SMA to BNC Adapter
46
TRANSMISSION LINE PROBES
PP065
The PP065 is a transmission line probe designed for use at
very high frequencies. The probe’s input impedance remains
nearly constant over its entire frequency range. Robust to
over voltage and ESD exposure, it is particularly useful in
applications producing fast rising, narrow pulses with amplitudes, which exceed the dynamic range of active probes.
Features:
• 1 GHz
• Low capacitance
• ÷100 1 GHz 5 k passive probe
PP065 Specifications
Bandwidth
Input Capacitance
Input Resistance
Maximum Voltage
Attenuation
1 GHz
1.5 pF
500 Ω
22 V
÷100
Ordering Information
Product Description
7.5 GHz Low Capacitance Passive Probe
(÷10, 1 kΩ; ÷20, 500 Ω)
1 GHz Low Capacitance Passive Probe
(÷10, 5 kΩ)
Product Code
PP066
PP065
47
1-800-5-LeCroy
teledynelecroy.com
Local sales offices are located throughout the world.
Visit our website to find the most convenient location.
© 2012 Teledyne LeCroy, Inc. All rights reserved. Specifications, prices, availability, and delivery subject to change without notice.
Product or brand names are trademarks or requested trademarks of their respective holders.
tlec_probecatalog-18dec13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement