JBL ES Series Speaker Systems ES150P High-definition audio with professional credentials The JBL ES Series offers a variety of bookshelf, wall-mount and floorstanding loudspeakers, and bring-down-the-house powered subwoofers. With innovative technologies derived directly from JBL Professional equipment, the JBL ES Series delivers powerful, accurate audio performance and brings the legendary JBL sound from concert stages, recording studios and movie theatres to living rooms, dens, bedrooms and patios. And with three finishes to choose from – black, beech and cherry – they’re designed to look good anywhere, with a style that equals their substance. ® Highlights Key Specifications 250mm (10") Front firing powered subwoofer Finishes: Cherry, Beech and Black 300 Watts RMS high-output, high-efficiency amplifier 300 Watts RMS high-output, high-efficiency amplifier for thunderous deep-bass extension without breakup or distortion, even at high listening levels Elegant Cabinet design with its slender profile and combination of wood-like vinyl with textured high-quality charcoal vinyl Switchable LFE input 250mm (10") PolyPlas -cone driver TM Adjustable low-pass crossover Phase switch allows subwoofer to operate with normal or reverse polarity. Subwoofer level control to conveniently adjust the relative volume level of low frequencies. Top-mounted LED conveniently indicates status of unit High-quality construction cabinet increases enclosures’ structural rigidity Tuned-port bass enclosure extends low-frequency response and increases overall efficiency of the bass driver, reducing distortion and improving its power-handling capacity JBL ES Series Speaker Systems ES150P Specifications Frequency response: 27Hz – 150Hz Amplifier RMS power: 300W Amplifier peak dynamic power*: 500W Crossover frequency: 50Hz – 150Hz; 24dB/octave, continuously variable Driver: 250mm (10") PolyPlas Dimensions with grille (H x W x D): 457mm x 337mm x 387mm (18" x 13-1/4" x 15-1/4") Weight per speaker: 17.7kg (39 lb) * The Peak Dynamic Power is measured by recording the highest center-to-peak voltage measuredacross the output of a resistive load equal to minimum impedance of thetransducer, using a 50Hz sine wave burst, 3 cycles on, 17 cycles off. Harman Consumer Group, Inc. 2, route de Tours, 72500 Château du Loir, France • 250 Crossways Park Drive, Woodbury, NY 11797, USA • 8500 Balboa Boulevard, Northridge, CA 91329, USA www.jbl.com © 2007 Harman International Industries, Incorporated. All rights reserved. JBL is a trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries. PolyPlas is a trademark of Harman International Industries, Incorporated. Features, specifications and appearance are subject to change without notice.