INSTRUCTIONS FOR
Oil-Free Diaphragm
Air Compressor
Stock No.07226 Part No.DA35
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND
EFFECTIVE USE OF THIS PRODUCT.
N J
(DRAPER Y | GENERAL INFORMATION |
These instructions accompanying the product are the original instructions. This document is part of the product, keep it
for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed, and
contains all the necessary information to ensure its correct and safe use. By following all the general safety instructions
contained in this manual, it will ensure both product and operator safety, together with longer life of the product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools policy
of continuous improvement determines the right to make modifications without prior warning.
DRAPER | CONTENTS |
Contents/guarantee ae K AK ERERRARRRRKAKARRERRARERRAKARARKERRARERRAKARARKERRARAREAKAKERKEKERRAREAKALERKEKELKLRLAKAKEREEEELGG 1
RY oT or= 4 To IPP 2
Power SUPply OP 3
LCT pT] r= 1 I= <1 YT Ko (Ua [oR 4
Additional safety instructions ..................-—..———e.—...-.r.=eeeeereierer reer e ere errs terra tesa rasa e nae e anne anne ranean ene en nena 5
Getting to know your oil-free diaphragm compressor ..........................eemeeeeeereierreerree reee 6
Operation and USE PUPP 7
= 1 P= TO 8
Disposal of 10 Ky PU 8
Explanation of SymDOIS/PICtOGrAMS .…..................ercseecsace see ea re nere nana rene en ee rene area area area ee een e eee eee eee 8
DeclaratiON PU enclosed
Grrl) | GUARANTEE |
Draper tools have been carefully tested and inspected before shipment and are guaranteed to be
free from defective materials and workmanship for a period of 12 months from the date of
purchase except where tools are hired out when the guarantee period is ninety days from the
date of purchase.
A proof of purchase must be provided with the tool.
Should the machine develop any fault, please return the complete tool to your nearest
authorized warranty repair agent or contact Draper Tools Limited, Chandler's Ford, Eastleigh,
Hampshire, SO53 1YF England. Telephone Sales Desk: (023) 8049 4333 or Product Helpline (023)
8049 4344.
If Upon inspection it is found that the fault occurring is due to defective materials or
workmanship, repairs will be carried out free of charge. This guarantee does not apply to normal
wear and tear, nor does it cover any damage caused by misuse, careless or unsafe handling,
alterations, accident, or repairs attempted or made by any personnel other than the authorised
Draper warranty repair agent.
NOTE: If the tool is found not to be within the terms of warranty, repairs and carriage charges
will be quoted and made accordingly.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its
terms are not authorised.
Your Draper guarantee is not effective unless you can produce upon request a dated receipt or
invoice to verify your proof of purchase within the 12 month period.
Please note that this guarantee is an additional benefit and does not affect your statutory rights.
Draper Tools Limited
ear ff (| SPECIFICATION |
The Draper Tools policy of continuous improvement determines the right to change specification
without notice.
RY Ko Tl, GF 1 [PP 07726
Part MO: eererrrrrrrr RR RRERRRRRERRERRRRRRRRRRRRRRRRRRRRERERERRERRERAREERERRERREREREARARRRRREREEREEREREREERRERREKERERLERREEG DA35
Rated voltage see R AR RRRRRRRRERERRRRERERRERERERRERERERRERERRRRRRRRERERRERERERRERERERREREREEEEAEG 230V-
Катеа i <TR 50Hz
Rated INPUT PPP HP (0.147kW)
Rated input current PPPS 5A
Revolutions per minutes (NO lOAd) ..…..................scscecrerere rer er ne ne nr anne mena rene ne se sean ne nana n 00 2900r/min
Maximum working pressure .......................0ecereerese nana se nana se nee ne sean near near anne near eee 58psi (4bar)
Air displacement ...…...................creccenerenene nee re rene se se nana nee n ee ce ne ses e ae ne0 1.22-1.40cfm (35-40L/min)
Sound pressure level ei eee eee eee etree teeter ranean eee eens 56.0dB(A)
Sound power level cee etter treater eee eee eens 76.0dB(A)
Dimensions (Lx W XH)... eee eee 210x150x 175mm
WBIGNT FEES 3.9kg
DRAPER Y | POWER SUPPLY
CAUTION: Risk of electric shock. Do not open.
This appliance is supplied with a moulded 3 pin mains plug for your safety. The value of the fuse
fitted is marked on the pin face of the plug. Should the fuse need replacing, ensure the
substitute is of the correct rating, approved to BS1362 and ASTA or BS Kite marked.
ASTA
BSI V
The fuse cover is removable with a small plain slot screwdriver. Ensure the fuse cover is replaced
before attempting to connect the plug to an electrical outlet. If the cover is missing, a
replacement must be obtained or the plug replaced with a suitable type.
If a replacement plug is to be fitted this must be carried out by a qualified electrician.
The damaged or incomplete plug, when cut from the cable shall be disabled to prevent
connection to a live electrical outlet.
This appliance is Class II" and is designed for connection to a power supply matching that
detailed on the rating label and compatible with the plug fitted.
If an extension lead is required, use an approved and compatible lead rated for this appliance.
Follow all the instruction supplied with the extension lead.
Earthed = : This product requires an earth connection to protect against electric shock from
accessible conductive parts in the event of a failure of the basic insulation.
IMPORTANT:
On products exceeding 2000W it is recommended that the power cable and/or
extension cable are fully unwound before a connection is made to the power supply.
However, ensure the residual cable does not pose a trip hazard
(DRAPER
GENERAL SAFETY INSTRUCTIONS
WARNING: When using electric tools basic safety
precautions should always be followed to reduce the risk of
fire, electric shock and personal injury including the
following.
Read all these instructions before attempting to operate this
product and save these instructions.
Safe operation
1. Keep work area clear
- Cluttered areas and benches invite injuries.
2. Consider work area environment
- Do not expose tools to rain.
- Do not use tools in damp or wet locations.
- Keep work area well lit.
- Do not use tools in the presence of flammable
liquids or gases.
3. Guard against electric shock
- Avoid body contact with earthed or grounded
surfaces (e.g. pipes, radiators, ranges, refrigerators).
4. Keep other persons away
- Do not let persons, especially children, not involved
in the work touch the tool or the extension cord and
keep them away from the work area.
5. Store idle tools
- When not in use, tool should be stored in a dry
locked-up place, out of reach of children.
6. Do not force the tool
- It will do the job better and safer at the rate for
which it was intended.
7. Use the right tool
- Do not force tools to do the job of a heavy duty
tool.
- Do not use tools for purposes not intended; for
example do not use circular saws to cut tree limbs or
logs.
8. Dress properly
Do not wear loose clothing or jewellery, they can be
caught in moving parts.
- Non-skid footwear is recommended when working
outdoors.
- Wear protective hair covering to contain long hair.
9. Use protective equipment
- Use safety glasses.
- Use face or dust mask if working operations create
dust.
10. Connect dust extraction equipment
- If the tool is provided for the connection of dust
extraction and collecting equipment, ensure these
are connected and properly used.
11.Do not abuse the cord
- Never yank the cord to disconnect it from the
socket. Keep the cord away from heat, oil and sharp
edges.
12. Secure work
- Where possible use clamps or a vice to hold the
work. It is safer than using your hand.
13.Do not overreach
- Keep proper footing and balance at all times.
14. Maintain tools with care
- Keep cutting tools sharp and clean for better and
safer performance.
- Follow instruction for lubricating and changing
accessories.
- Inspect tool cords periodically and if damaged have
them repaired by an authorised service facility.
- Inspect extension cords periodically and replace if
damaged.
- Keep handles dry, clean and free from oil and
grease.
15. Disconnect tools
- When not in use, before servicing and when
changing accessories such as blades, bits and
cutters, disconnect tools from the power supply.
16. Remove adjusting keys and wrenches
- Form the habit of checking to see that keys and
adjusting wrenches are removed from the tool
before turning it on.
17. Avoid unintentional starting
- Ensure switch is in “off” position when plugging in.
18. Use outdoor extension leads
- When the tool is used outdoors, use only extension
cords intended for outdoor use and so marked.
19. Stay alert
- Watch what you are doing, use common sense and
do not operate the tool when you are tired.
20.Check damaged parts
- Before further use of tool, it should be carefully
checked to determine that it will operate properly
and perform its intended function.
- Check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting and any
other conditions that may affect its operation.
- A guard or other part that is damaged should be
properly repaired or replaced by an authorised
service centre unless otherwise indicated in this
instruction manual.
- Have defective switches replaced by an authorized
service centre.
- Do not use the tool if the switch does not turn it on
and off.
. Warning
- The use of any accessory or attachment other than
one recommended in this instruction manual may
present a risk of personal injury.
22.Have your tool repaired by a qualified person
- This electric tool complies with the relevant safety
rules. Repairs should only be carried out by qualified
persons using original spare parts, otherwise this
may result in considerable danger to the user.
2
nl
| ADDITIONAL SAFETY INSTRUCTIONS
- Do not use to spray flammable liquids. - Always wear appropriate safety wear, i.e.
- Only use in well ventilated areas. safety glasses and mask.
- Always consult the manual for the air tool
being used.
© ( GETTING TO KNOW YOUR
EE DIAPHRAGM COMPRESSOR
N J
(D) On/Off switch. (5) Handle.
(2) Air tank. (6) 16" BSP hose connectors.
(3) Airbrush holders. (7) Pressure gauge.
(4) Pressure regulator. Cable and plug.
Upon receipt of the compressor, ensure all components are present and have remained
undamaged in transit.
Retain the packing materials and packaging in case future transportation of the compressor is
necessary. We recommend that the packaging is kept, at least within the period of the
guarantee.
| OPERATION AND USE |
- WORKING PRESSURE ADJUSTMENT (Fig. 1 .):
- NOTE: For technical specifications and detailed
instructions please refer to the instructions provided
with the specific air tool/accessory.
- AIR LINE CONNECTION (Fig.1.):
The compressor comes equipped with a Vs” BSP thread
(A). To connect the hose line, simply screw the
threaded connector on to the air outlet ensuring a
tight fit to prevent air leakage.
- NOTE: Both connectors need to connect to hose and
spray gun to prevent air escaping.
- ON/OFF SWITCH (Fig.2.):
Prior to connecting the compressor to the power supply,
ensure the power switch (©) is in the OFF position “O”.
Connect to a power supply and switch the unit on "I.
- AUTO STOP:
This compressor is fitted with an Auto Stop which
prevents damage to the compressor. Once the pressure
has built up to 4bar the compressor will cut out and then
re-start at 3bar.
The outlet line pressure from the tank is adjusted using
regulator (D). Rotate the regulator clockwise to
increase the pressure or anticlockwise to decrease. The
pressure is indicated on gauge (E) Fig.3.
- ATTENTION: After each use set the pressure to zero to
help prolong the life of the regulator and avoid
damage.
(DRAPER | MAINTENANCE |
- The motor must be correctly ventilated during operation. For this reason avoid blocking the air
inlets. After use disconnect the tool from the power supply and vacuum the ventilation slots.
If replacement of the supply cord is necessary, this has to be done by the manufacturer or his
agent in order to avoid a safety hazard.
DRAPER Y | DISPOSAL OF POWER TOOL |
- At the end of the machines working life, or when it can no longer be repaired, ensure that it
is disposed of according to national regulations.
- Contact your local authority for details of collection schemes in your area.
In all circumstances:
= Do not dispose of power tools with domestic waste.
= Do not incinerate.
= Do not abandon in the environment.
= Do not dispose of WEEE* as unsorted municipal waste.
* Waste Electrical & Electronic Equipment.
(DRAPER ] | EXPLANATION OF SYMBOLS/PICTOGRAMS |
Do not dispose of WEEE*
as unsorted municipal waste.
* Waste Electrical 6: Electronic Equipment.
| NOTES
(DRAPER | NOTES
| CONTACTS
- DRAPER TOOLS LIMITED,
Hursley Road, Chandler's Ford,
Eastleigh, Hampshire. SO53 1YE U.K
- Helpline: (023) 8049 4344
- Sales Desk: (023) 8049 4333
- Internet: www.draper.co.uk
- E-mail: salesedrapertools.com
- Sales Fax: (023) 8049 4209
- General Enquiries: (023) 8026 6355
- Service/Warranty Repair Agent
For aftersales servicing or warranty repairs, please
contact the Draper Tools Helpline for details of an
agent in your local area.
YOUR DRAPER STOCKIST
RWKC110811
OPublished by Draper Tools Limited.
No part of this publication may be reproduced, stored in a retrieval system or
transmitted in any form or by any means, electronic, mechanical photocopying,
recording or otherwise without prior permission in writing from Draper Tools Ltd.
">
