TECHNICAL DATA SHEET Saracen TMV3 Basin Lever Tap Product Specification

TECHNICAL DATA SHEET Saracen TMV3 Basin Lever Tap Product Specification
TECHNICAL DATA SHEET
Saracen TMV3 Basin Lever Tap
A lever operated, thermostatically controlled, sequential basin
lever tap.
Product Specification
Product Code: 171632
Maximum Working Pressure:
5 Bar
Minimum Working Pressure:
0.2 Bar
Hot Supply Temperature:
52 - 65oC
Cold Supply Temperature:
5 - 20oC
Factory Set Temperature:
41oC
Minimum Temperature Differential:
10oC
(between hot supply and outlet temperature)
• Thermostatic, sequential basin tap
• Simple to operate, with a single lever for
ease of use
• Easy to install, fits all single hole basins
• Complete with flexible hoses and check
valves
• Approved for NHS Model Engineering
Specification DO8
153
114
Max 30
Dimensions
129
Additional Information
Ø 29-36
180°
450
Flow Rates
Flow Rate (lpm)
20
15
10
5
0
30
o
45
o
60
o
75
o
90
o
105
o
120
Lever Angle
o
135
o
o
o
o
150 165 180
15mm compression unions or 1/2" BSP male available
All dimensions shown in mm unless otherwise stated
Wolseley UK
Warwickshire, CV31 3HH
For further information please call 0844 811 7658
or visit www.wolseley.co.uk
The information contained on this page was correct at date of issue. We pursue a policy of continuing improvement in design and performance of our
products and so reserve the right to change specifications without prior notice.
Scn_TMV3Tap_001_06-14
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement