Range Guide Building Services - Commercial Pioneering for You Edition 2014

Range Guide Building Services - Commercial Pioneering for You Edition 2014
Pioneering for You
Edition 2014
Range Guide
Building Services - Commercial
3
Worldwide.
High-efficiency solutions from Wilo.
WILO SE, with headquarters in Dortmund,
is one of the world’s leading manufacturers
of pumps and pump systems for heating,
air conditioning and cooling technology,
as well as for water supplies and sewage
treatment and disposal.
Founded in 1872 as Kupfer- und Messingwarenfabrik
Louis Opländer, the company has almost 70 branches
worldwide and over 6,200 employees.
Turnover amounted to 1,070.5 million EUR in
2011. International recognition has increased
rapidly since the company became a European
limited liability company (SE) in 2008.
Wilo pumps and systems set global standards
for efficiency and technical performance: with
high-efficiency solutions for all applications in
the segments.
4
Building Services - Commercial Range
Building Services.
Pumps and pump systems for heating, air conditioning, cooling, pressure boosting,
water supply and sewage disposal in domestic households, rented accommodation,
administrative and commercial buildings.
Highest efficiency at the lowest life cycle costs.
Heating, air-conditioning,
cooling.
Wilo-Stratos high-efficiency
pump for heating, airconditioning and cooling
worldwide.
Pressure boosting.
Wilo pressure boosting
systems with Helix highpressure multistage
centrifugal pumps. Constant
pressure at every level.
Sewage disposal.
Wilo-DrainLift M, L. Fullvalue and connectionready faeces lifting unit for
detached and semi-detached
houses.
The economic supply to buildings increasingly
demands the use of innovative systems from
optimally configured components. Whether in
a detached or semi-detached home, industrial,
commercial or public buildings, hospitals or
hotels: Wilo assures everyone with its highefficiency pumps and systems for heating
systems, air conditioning, water supply and
sewage disposal. Many processes within
Facility Management can be controlled and
regulated by building automation
systems conveniently.
Wilo high-efficiency pumps and Wilo pump
systems with electronic controls offer the
best technological foundations anywhere
in the market. They are at home in any
system and can be integrated optimally into
building automation. They offer exceptional
possibilities for saving on power and upkeep
costs. An investment, that will soon be offset
and more than pay for itself in the long run.
5
Wilo Online Catalogue
www.wilo.co.uk
Residential pumping solutions.
Range Guide.
Building Services.
Heating, air-conditioning, cooling.
Water supply.
Drainage and sewage.
Pumps, pump systems and
accessories for heating, airconditioning and secondary hot
water.
Pumps, pump systems and
accessories for:
Pumps, pump systems and
accessories for:
> Rainwater utilisation
> Domestic water supply
> Commercial water supply and
pressure boosting
> Raw water intake
> Wastewater collection and
transport
> Drainage
> Pressure drainage
> High-efficiency-, energy-saving
and standard pumps in glandless
and glanded pump versions
> Pump regulators and controls,
modules for building automation
and switchgears
> Lifting units for condensates
6
Building Services - Commercial Range
Product range
Glandless standard highefficiency pumps
Glandless premium highefficiency pumps
Glandless standard highefficiency pumps
Glandless premium highefficiency pumps
Series
Wilo-Yonos PICO
Wilo-Stratos PICO
Wilo-Yonos MAXO
Wilo-Yonos MAXO-D
Wilo-Stratos
Wilo-Stratos-D
Field of application
Heating, air-conditioning, cooling
Heating, air-conditioning, cooling
Heating, air-conditioning, cooling
Heating, air-conditioning, cooling
Design
Glandless circulation pump with
screwed connection, EC motor
and automatic power adjustment
Glandless circulation pump with
screwed connection, EC motor
and automatic power adjustment
Glandless circulation pump with
screwed connection or flange
connection, EC motor and automatic power adjustment
Glandless circulation pump with
screwed connection or flange
connec- tion, EC motor and automatic power adjustment
Application
Hot-water heating systems
of all kinds, air-conditioning
applications, industrial circulation
systems
Hot-water heating systems
of all kinds, air-conditioning
applications, industrial circulation
systems
Hot-water heating systems of all
kinds, air-conditioning systems,
closed cooling circuits, industrial
circulation systems
Hot-water heating systems of all
kinds, air-conditioning systems,
closed cooling circuits, industrial
circulation systems
Volume flow Q max.
4.8 m³/h
4 m³/h
33 m³/h
61 m³/h
Delivery head H max.
7.6 m
6.0 m
12 m
16 m
Technical data
ƒƒ Fluid temperature -10 °C to
+95 °C
ƒƒ Mains connection 1~230 V,
50 Hz
ƒƒ Energy Efficiency index (EEi)
≤ 0.20
(see also rating plate)
ƒƒ Protection class iP X2D
ƒƒ Screwed connection Rp ½, Rp
1 and Rp 1¼
ƒƒ Max. operating pressure 6 bar
ƒƒ Fluid temperature +2 °C to
+110 °C
ƒƒ Mains connection 1~230 V,
50 Hz
ƒƒ Energy Efficiency index (EEi) ≤
0.20 (see also rating plate)
ƒƒ Protection class iP X4D
ƒƒ Screwed connection Rp ½, Rp
1 and Rp 1¼
ƒƒ Max. operating pressure 10 bar
ƒƒ Permitted temperature range -20
°C to +110 °C
ƒƒ Mains connection 1~230 V, 50 Hz
ƒƒ Energy Efficiency index (EEi) ≤
0.23 ƒ Protection class iP X4D
ƒƒ Nominal diameter Rp 1 to DN 65
ƒƒ Max. operating pressure
Screw-end pumps 10 bar
Flange-end pumps 6/10 bar"
ƒƒ Permitted temperature range -10
°C to +110 °C
ƒƒ Mains connection 1~230 V, 50 Hz
ƒƒ Energy Efficiency index (EEi)
≤ 0.23 (EEi ≤ 0.27 for double
pumps)
ƒƒ Protection class iP X4D
ƒƒ Nominal diameter Rp 1 to DN 100
ƒƒ Max. operating pressure
Screw-end pumps 10 bar
Flange-end pumps 6/10 bar or 6
bar (special version: 10 or 16 bar)
Equipment/function
ƒƒ Control mode Δp--c and Δp-v
ƒƒ Setting of pump output (delivery head)
ƒƒ Automatic venting function
ƒƒ Automatic deblocking function
ƒƒ LED display for setting the
setpoint and displaying actual
consumption in watts
ƒƒ Blocking-current proof motor
ƒƒ Particle filter
ƒƒ Quick electrical connection
with Wilo-Connector
ƒƒ Options:
- Versions with short port-toport length 130 mm
ƒƒ Control mode: Δp-c and
Δp-v; Dynamic Adapt control
function can be combined
with Δp-v
ƒƒ Automatic setback operation
ƒƒ Automatic venting routine
ƒƒ Automatic deblocking function
ƒƒ Display indication of current
power consumption in W and
cumulative electricity consumption in kWh
ƒƒ Reset function for resetting
the electricity meter
ƒƒ Reset function for resetting to
factory settings
ƒƒ Blocking-current proof motor
ƒƒ Particle filter
ƒƒ Quick electrical connection
with Wilo-Connector
ƒƒ Options: version with redbrass pump housing for use in
underfloor heating systems;
version with short port-toport length 130 mm
ƒƒ Preselectable control modes
Δp-c, Δp-v
ƒƒ LED display for setting the
required delivery head
ƒƒ Quick electrical connection with
Wilo-Connector
ƒƒ Motor protection, fault signal
light and contact for collective
fault signal
ƒƒ Pump housing with cataphoretic coating for external corrosion
protection
ƒƒ Combination flanges PN 6/PN
10 (for DN 40 to DN 65)
ƒƒ EC motor
ƒƒ Pre-selectable control modes
∆p-c, ∆p-v, ∆p-T
ƒƒ Automatic setback operation
ƒƒ Dual pump management
ƒƒ Graphical pump display with
rotating display
ƒƒ Remote control via infrared
interface (iR-Stick/iR-Monitor)
ƒƒ Integrated motor protection
ƒƒ System expansion by means of
retrofittable interface modules
for communication: Modbus,
BACnet, CAN, LON, PLR etc.
ƒƒ Pump housing with cataphoretic coating
ƒƒ Combination flanges PN 6/PN
10 (for DN 32 to DN 65)
ƒƒ Thermal insulation shells as
standard, for heating applications
Special features
ƒƒ High-efficiency pump especially for single and two-family
houses, as well as for two to
six-family houses
ƒƒ Only 4 watts minimum power
consumption
ƒƒ Very high starting torque for
reliable starting
ƒƒ Integrated motor protection
ƒƒ Venting function for automatic
venting of the rotor chamber
ƒƒ Flexible installation due to
compact design
ƒƒ High-efficiency pump especially for single and two-family
houses, as well as for two to
six-family houses.
ƒƒ Up to 90% electricity savings
com- pared to older uncontrolled heating pumps
ƒƒ Only 3 watts minimum power
consumption
ƒƒ Very high starting torque for
reliable starting
ƒƒ Integrated motor protection
ƒƒ Venting routine for automatic
venting of the rotor chamber
ƒƒ Maximum efficiency due to
ECM technology
ƒƒ Quick and convenient
electrical connection with
Wilo-Connector
ƒƒ Collective fault signal on all
types for assuring system
availability
ƒƒ Can be used in cooling/
air-condi- tioning systems
without ambient temperature
limitation
ƒƒ Up to 80% electricity savings
over uncontrolled circulation
pumps
ƒƒ Maximum efficiency due to
ECM technology
Information
Online catalogue:
productfinder.wilo.com
Building Services catalogue: Heating,
air-conditioning, cooling
Online catalogue:
productfinder.wilo.com
Building Services catalogue: Heating,
air-conditioning, cooling
Online catalogue:
productfinder.wilo.com
Building Services catalogue: Heating,
air-conditioning, cooling
Online catalogue:
productfinder.wilo.com
Building Services catalogue: Heating,
air-conditioning, cooling
Edition 2014 – Subject to change without prior notice.
7
Product range
Glanded high-efficiency pumps
in in-line design
Pump control
Glandless standard highefficiency pumps
Glandless premium highefficiency pumps
Series
Wilo-Stratos GIGA
Wilo-IR-Stick, IR-Monitor
Wilo-IF-Module Stratos/Wilo-IFModule Wilo-Protect-Module C
Wilo-Stratos ECO-STG
Wilo-Star-Z NOVA
Field of application
Heating, air-conditioning, cooling, industrial process
Heating, air-conditioning, cooling
Solar thermal and geothermal
energy systems
Secondary hot water
Design
High-efficiency in-line pump
with EC motor, electronically controlled, with flange connection, in
glanded design
Glandless circulation pump with
screwed connection, EC motor
and automatic power adjustment
Glandless circulation pump with
screwed connection and blocking
- current proof synchronous
motor
Application
Pumping of heating water (in
accordance with VDI 2035), cold
water and water/glycol mixtures
without abrasive substances in
heating, cold water and cooling
systems.
Wilo-Control products for
connecting pumps to building
automation
Circulation in solar thermal and
geothermal energy systems
Secondary hot water circulation
systems in industry and in building services
Volume flow Q max.
120 m3/h
–
2.5 m3/h
0.4 m3/h
Delivery head H max.
52 m
–
5m
0.9 m
Technical data
ƒƒ Permitted temperature range
of the fluid -20 °C to +140 °C
ƒƒ Mains connection: 3~380 V 3~480 V (±10 %), 50/60 Hz
ƒƒ Minimum efficiency index MEI
≥ 0.7 (for the series)
ƒƒ Protection class IP 55
ƒƒ Max. operating pressure 16 bar
up to +120 °C, 13 bar up to
+140 °C
–
ƒƒ Permitted temperature range +15
°C to +110 °C
ƒƒ Mains connection 1~230 V, 50 Hz
ƒƒ Protection class iP 44
ƒƒ Nominal diameter Rp 1
ƒƒ Max. operating pressure 10 bar
ƒƒ Fluid temperature: secondary hot
water up to water hardness
3.56 mmol/l (20 °d): max. +65 °C,
in short-term operation (2 h) up
to +70 °C
ƒƒ Mains connection 1~230 V, 50 Hz
ƒƒ Protection class IP 42
ƒƒ Screwed connection Rp ½
ƒƒ Max. operating pressure 10 bar"
Equipment/function
ƒƒ Single-stage, low-pressure
centrifugal pump in in-line
design with
ƒƒ Mechanical seal
ƒƒ Flange connection
ƒƒ Lantern
ƒƒ Coupling
ƒƒ Electronically controlled EC
motor
Materials:
ƒƒ Pump housing and lantern:
EN-GJL-250
ƒƒ Impeller: PPS-GF40
ƒƒ Shaft: 1.4122
ƒƒ Mechanical seal: AQ1EGG,
other mechanical seals on
request
Wilo-IR-Stick/IR-Monitor
ƒƒ Remote control with infrared
inter- face for electronically
controlled Wilo pumps
Wilo-IF-Modules
Stratos/IF-Modules
ƒƒ Plug-in modules for BA
connection of Stratos, Stratos
GIGA, IP-E, DP-E, IL-E/DL-E,
BL-E, MHIE, MVIE,
Helix VE...
Wilo-Protect-Module C
ƒƒ Plug-in module for BA connection of uncontrolled TOP-STG/
STGD and TOP-Z pumps
ƒƒ EC motor
ƒƒ Control modes ∆p-v and ∆p-c
ƒƒ Automatic setback operation
ƒƒ Blocking-current proof motor
Cable inlet on both sides for
easy installation
ƒƒ Quick connection with spring
clips
ƒƒ Connection for building automation (BA)
ƒƒ Pump housing with cataphoretic coating for external corrosion
protection
ƒƒ Quick electrical connection with
Wilo-Connector
ƒƒ Blocking-current proof motor
ƒƒ Integrated ball shut-off valve
on the suction side (Star-Z
NOVA A, Star-Z-NOVA C only)
ƒƒ Integrated non-return valve on
the pressure side (Star-Z NOVA
A, Star-Z-NOVA C only)
ƒƒ Including plug-in time switch
(Star-Z NOVA C only)
ƒƒ Including 1.8 m connecting
cable with shock-proof plug
(Star-Z NOVA C only)
ƒƒ Including thermal insulation
Special features
ƒƒ Maximum overall efficiency
based on a new Wilo glanded
design
ƒƒ Highly efficient EC motor
(efficiency higher than iE4 limit
values)
ƒƒ High-efficiency hydraulics
adapted to the EC motor
technology, with optimised
efficiency, minimum efficiency
index (MEI) ≥ 0.7
ƒƒ Integrated electronic control
ƒƒ Control range is up to three
times as high as for conventional electronically controlled
pumps
ƒƒ Interfaces to bus communication
ƒƒ Integrated dual-pump management with efficiency-optimised peak-load operation
–
ƒƒ Up to 80% electricity savings
over uncontrolled circulation
pumps
ƒƒ Maximum efficiency due to
ECM technology
ƒƒ Min. electronic power consumption only 5.8 W
ƒƒ 3 times higher starting torque
than conventional circulation
pumps
ƒƒ Extremely low power consumption: 2 to 4.5 watts due
to new synchronous motor
ƒƒ Materials of the highest
quality: with stainless steel
impeller. This results in a top
hygiene standard, durability
and reliable protection against
corrosion.
ƒƒ Extended field of application
for hard water: up to 20° dH
ƒƒ Flexible service motor: fast
replacement of all common
pump types
ƒƒ Quick and convenient electrical connection with no tools
required thanks to Wilo-Connector"
Information
Online catalogue:
productfinder.wilo.com
Building Services catalogue: Heating,
air-conditioning, cooling
Online catalogue:
productfinder.wilo.com
Building Services catalogue: Heating,
air-conditioning, cooling
Online catalogue:
productfinder.wilo.com
Building Services catalogue: Heating,
air-conditioning, cooling
Online catalogue:
productfinder.wilo.com
Building Services catalogue: Heating,
air-conditioning, cooling
Edition 2014 – Subject to change without prior notice.
8
Building Services - Commercial Range
Product range
Glandless high-efficiency pumps
Glandless high-efficiency pumps
Glandless standard pumps
Standard glandless pumps
Series
Wilo-Stratos-ECO-Z
Wilo-Stratos ECO-Z … BMS
Wilo-Stratos-Z
Wilo-Stratos-ZD
Wilo-Star-Z
Wilo-Star-ZD
Wilo-TOP-Z
Field of application
Secondary hot water
Heating, air-conditioning, cooling
Secondary hot water
Secondary hot water
Design
Glandless circulation pump with
screwed connection and automatic power adjustment
Glandless circulation pump with
threaded connection and automatic power adjustment
Glandless circulation pump with
threaded connection
Glandless circulation pump with
screwed connection or flange
connection
Application
Secondary hot water circulation
systems in industry and in building services
Secondary hot water circulation
systems and similar systems in
industrial and building services
Secondary hot water circulation
systems and similar systems in
industrial and building services
Secondary hot water circulation
sys- tems in industry and in
building services
Volume flow Q max.
2.5 m3/h
41 m³/h
5.5 m³/h
65 m3/h
Delivery head H max.
5m
12 m
6.0m
9m
Technical data
ƒƒ Fluid temperature: secondary
hot water up to water hardness
3.2 mmol/l (18 °d): max. +65
°C, in short-term operation
(2 h) up to +70 °C
ƒƒ Mains connection 1~230 V,
50 Hz
ƒƒ Protection class IP 44
ƒƒ Nominal diameter Rp 1
ƒƒ Max. operating pressure 10 bar
ƒƒ Perm. temperature range of
secondary hot water up to water
hardness of 3.56 mmol/l (20 °d)
max. +80 °C
ƒƒ Secondary Hot Water -10 °C to
+110 °C
ƒƒ Mains connection 1~230 V, 50 Hz
ƒƒ Protection class IP X4D
ƒƒ Nominal diameter Rp 1 to DN 50
ƒƒ Max. operating pressure screwend pumps 10 bar flange pumps
6/10 bar
ƒƒ Fluid temperature secondary hot
water up to water hardness 3.2
mmol/l (18 °d) max.
ƒƒ +65 °C in short-term operation
(2 h) up to +70 °C
ƒƒ Mains connection 1~230 V, 50
Hz or for Star-Z 25/2 DM 3~400
V, 50 Hz
ƒƒ Protection class IP 44 (IP 42 for
Star-Z 15 TT)
ƒƒ Nominal diameter Rp ½, Rp 1
ƒƒ Max. operating pressure 10 bar
ƒƒ Permitted temperature range of
secondary hot water up to a water
hardness of 3.56 mmol/l (20 °d)
max. +80 °C
ƒƒ Mains connection:
- 1~230 V, 50 Hz (depending
on type)
- 3~400 V, 50 Hz
- 3~230 V, 50 Hz (with optional
switching plug)
ƒƒ Protection class IP X4D
ƒƒ Nominal diameter Rp 1 to DN 50
ƒƒ Max. operating pressure Screwend pumps 10 bar Flange-end
pumps 6/10 bar
Equipment/function
ƒƒ EC motor
ƒƒ Control mode ∆p-v
(BMS version ∆p-v and ∆p-c)
ƒƒ Automatic setback operation
ƒƒ Blocking-current proof motor
ƒƒ Cable inlet on both sides for
easy installation
ƒƒ Quick connection with spring
clips
ƒƒ Thermal insulation shell"
ƒƒ EC motor
ƒƒ Pre-selectable control modes
Δp-c, Δp-v, Δp-T
ƒƒ Pre-selectable speed for constant operation
ƒƒ Automatic setback operation
for additional savings potential
ƒƒ Dual pump management
ƒƒ Red-button technology for
simple operation
ƒƒ Graphical pump display with
rotating display
ƒƒ Remote control via infrared interface (IR-Module/IR-Monitor)
ƒƒ Integrated motor protection
ƒƒ System extension due to retrofit
communication modules LON,
CAN, PLR, etc.
ƒƒ Combination flanges PN 6/PN
10 (for DN 40 and DN 50)
ƒƒ Thermal insulation shells as
standard for heating applications
ƒƒ Constant speed or for Star-Z
25/6, 20/4, 20/5, 20/7 three
selectable speed stages
ƒƒ Blocking-current proof motor,
motor protection not required
ƒƒ Quick connection with spring
clips
ƒƒ Thermal insulation as standard
for StarZ 15 TT.
ƒƒ Star-Z 15 TT with integrated timer and thermostat, LC
display with symbolic language,
red button technology and
automatic detection of the
thermal disinfection of the
warm secondary hot water tank,
as well as ball shut-off valve on
the suction side and non-return
valve on the pressure side.
ƒƒ Star-ZD version as double pump
ƒƒ Pre-selectable speed stages
ƒƒ Thermal insulation as standard
ƒƒ All plastic parts that come into
contact with the fluid fulfil KTW
recommendations
ƒƒ Combination flange PN 6/PN 10
(DN 40 to DN 65)
ƒƒ Extendible motor protection,
signal and display functions
ƒƒ Full motor protection
ƒƒ Cable inlet into terminal box
possible on both sides (starting
from P1 ≥ 250 W) with integrated strain relief
Special features
ƒƒ Corrosion-resistant pump
housing made of red brass for
systems where oxygen entry
is possible
ƒƒ 3 times higher starting torque
than conventional circulation
pumps
ƒƒ All plastic parts that come into
contact with the fluid fulfil
KTW recommendations
ƒƒ Min. electronic power consumption only 5.8 W
ƒƒ Up to 80 % over circulation
pumps without speed control
ƒƒ Highest degrees of efficiency
due to ECM technology
ƒƒ Corrosion-resistant pump
housing made of red brass
ƒƒ Stratos-Z available with corrosionresistant pump housing
made of red brass.
ƒƒ Stratos-ZD available with cataphoretic (KTL) coated pump
housing made of cast iron.
ƒƒ All parts that come into contact with the fluid fulfil KTW
recommendations
ƒƒ Pump communication in simple and safely retrofit plug-in
technology
ƒƒ Easy installation due to combination flanges, nominal width
DN 40 to DN 65
Information
Online catalogue:
productfinder.wilo.com
Building Services catalogue: Heating,
air-conditioning, cooling
Online catalogue:
productfinder.wilo.com
Building Services catalogue: Heating,
air-conditioning, cooling
Online catalogue:
productfinder.wilo.com
Building Services catalogue: Heating,
air-conditioning, cooling
Online catalogue:
productfinder.wilo.com
Building Services catalogue: Heating,
air-conditioning, cooling
Edition 2014 – Subject to change without prior notice.
9
Product range
Glanded high-efficiency pumps
in in-line design
Rainwater utilisation systems
Rainwater utilisation systems
Rainwater utilisation systems
Series
Wilo-VeroLine iP-Z
Wilo-RainSystem AF 150
Wilo-RainSystem AF 400
Wilo-RainCollector II RWN
Field of application
Secondary hot water
Rainwater utilisation
Rainwater utilisation
Rainwater utilisation
Design
Glanded circulation pump in
in-line design with screwed
connection
Automatic rainwater utilisation
system with 2 self-priming
pumps
Automatic rainwater utilisation
system with run-down tank and 2
non-self- priming pumps
Ready-to-plug rainwater utilisation system with rainwater tank
Application
For pumping potable water, cold
and hot water (in accordance
with VDI 2035) without abrasive
substances, in heating, cold water
and cooling water systems"
Rainwater utilisation in multi-family houses and small businesses for saving potable water
in conjunction with rain- water
storage tanks or reservoirs
Hybrid system for commercial and
industrial rainwater utilisation for
saving potable water in conjunction with rainwater storage tanks
or reservoirs
Rainwater utilisation for saving
potable water
Volume flow Q max.
5 m3/h
16 m3/h
16 m3/h
5 m3/h
Delivery head H max.
4.5 m
55 m
55 m
55 m
Technical data
ƒƒ Permitted temperature range
of secondary hot water up to a
water hardness of 4.99 mmol/l
(28 °d) max. +65 °C
ƒƒ In short-term operation (2 h)
up to +110 °C
ƒƒ Heating water -8 °C to
+110 °C
ƒƒ Mains connection 1~230 V, 50
Hz, 3~400 V, 50 Hz
ƒƒ Protection class IP 44
ƒƒ Nominal diameter Rp 1
ƒƒ Max. operating pressure 10 bar
ƒƒ Mains connection 1~230 V,
50 Hz
ƒƒ Suction head max. 8 m
ƒƒ Fluid temperature max. +5 °C
to +35 °C
ƒƒ Max. operating pressure 8 bar
ƒƒ Replenishment reservoir 150 l
ƒƒ Protection class IP 41
ƒƒ Mains connection 3~400 V, 50 Hz
ƒƒ Fluid temperature max. +5 °C to
+35 °C
ƒƒ Max. operating pressure 10 bar
ƒƒ Replenishment reservoir 400 l
ƒƒ Protection class IP 54"
ƒƒ Mains connection 1~230 V, 50 Hz
ƒƒ Fluid temperature max. +5 °C to
+35 °C
ƒƒ Max. operating pressure 6 bar
ƒƒ Replenishment reservoir 1,500 l
ƒƒ Protection class IP 54
Equipment/function
ƒƒ Single-stage, low-pressure
centrifugal pump in in-line
design with
ƒƒ Mechanical seal
ƒƒ Screwed connection
ƒƒ Motor with one-piece shaft
ƒƒ Connection-ready module
with compact construction
ƒƒ Mounted on vibration-insulated painted steel tubular frames
ƒƒ 2 MultiCargo MC centrifugal
pumps (self-priming)
ƒƒ Joint tubing R 1 ½ on the pressure side, including transmitter
unit, diaphragm pressure
vessel, shut-off device
ƒƒ Pressure gauge 0-10 bar
ƒƒ Ball valve on suction and
pressure sides
ƒƒ Replenishment reservoir (150 l)
with float valve
ƒƒ RainControl Professional
central switchgear with control
electronics, level sensor
ƒƒ Menu-prompted operation and
display
ƒƒ Pump cycling and test run
ƒƒ Automatic fault-actuated
switchover and peak-load
operation
ƒƒ Automatic water exchange in
the replenishment reservoir,
prevents lime deposits
ƒƒ Connection-ready module with
compact construction
ƒƒ Mounted on vibration-insulated
baseplate
ƒƒ 2 MultiPress MP centrifugal
pumps (non-self-priming)
ƒƒ Joint tubing R 1½ on the pressure side, including transmitter
unit, diaphragm pressure vessel,
shut-off device
ƒƒ Pressure gauge 0-10 bar
ƒƒ Ball valve on suction and pressure sides and non-return valve
ƒƒ Hybrid tank with all connections, calmed inlets and
overflow with siphon
ƒƒ RainControl Hybrid central
switch- gear with control
electronics
ƒƒ Pump cycling and test run
ƒƒ Automatic fault-actuated
switchover and peak-load
operation
ƒƒ Automatic water exchange in
the replenishment reservoir
ƒƒ 1 MultiCargo MC centrifugal
pump (self-priming)
ƒƒ Electronic pump control with
Wilo-FluidControl
ƒƒ Connection cable with plug
ƒƒ 1500 litre storage tank made of
polyethylene
ƒƒ Make-up funnel
ƒƒ Manhole cover
ƒƒ Protection against low water
level
ƒƒ Flexible connection on pressure
side
Other versions, additionally with
ƒƒ Automatic water replenishment
ƒƒ Cable set
ƒƒ Overflow protection when
installed under backflow level
Extension kits can be retrofitted
at any time
Special features
ƒƒ High resistance to corrosive
fluids due to stainless steel
housing and Noryl impeller
ƒƒ Wide range of applications due
to suitability for water hardness up to 5 mmol/l (28 °dH)
ƒƒ All plastic parts that come into
contact with the fluid fulfil
KTW recommendations
ƒƒ Low-noise due to multistage
centrifugal pumps
ƒƒ All parts that come in contact
with the fluid are corrosion-free
ƒƒ Maximum operational reliability due to fully electronic
RainControl Professional
controller
ƒƒ Demand-oriented fresh water
replenishment
ƒƒ High reliability due to
DVGW-certified, flow-optimised and noise-optimised
replenishment reservoir
ƒƒ Low-noise due to multistage
centrifugal pumps
ƒƒ All parts that come in contact
with the fluid are corrosion-free
ƒƒ Maximum operational reliability due to trendsetting fully
electronic RainControl Hybrid
controller
ƒƒ Demand-oriented fresh water
replenishment
ƒƒ High reliability due to flowoptimised and noise-optimised
overall concept
ƒƒ Automatic control of the
feeding pump
ƒƒ System/level control in the
low- voltage range
ƒƒ Low-noise, self-priming pump
ensures almost noiseless
system operation
ƒƒ Corrosion-free
ƒƒ Can be expanded at any time
ƒƒ Multi-tank system with replenishment and settling zone
for better water quality (Wilo
MKS system)
ƒƒ Greatest possible connection
flexibility, due to rotating
rainwater inlet
Information
Online catalogue:
productfinder.wilo.com
Building Services catalogue: Heating,
air-conditioning, cooling
Online catalogue:
productfinder.wilo.com
Building Services catalogue:
Water supply
Online catalogue:
productfinder.wilo.com
Building Services catalogue:
Water supply
Online catalogue:
productfinder.wilo.com
Building Services catalogue:
Water supply
Edition 2014 – Subject to change without prior notice.
10
Building Services - Commercial Range
Product range
Self-priming multistage pumps
and pump systems
Self-priming multistage pumps
and pump systems
Non-self-priming multistage
pumps and pump systems
Non-self-priming water-supply
unit with frequency converter
Series
Wilo-Jet WJ
Wilo-Jet HWJ
Wilo-Jet FWJ
Wilo-MultiCargo MC
Wilo-MultiCargo HMC
Wilo-MultiCargo FMC
Wilo-MultiPress MP
Wilo-MultiPress HMP
Wilo-MultiPress FMP
Wilo-EMHiL
Field of application
Rainwater utilisation, water distribution/boosting, raw water intake
Rainwater utilisation, water distribution/boosting, raw water intake
Rainwater utilisation, water distribution/boosting, raw water intake
Rainwater utilisation, water distribution/boosting, raw water intake
Design
Self-priming single-stage centrifugal pumps
Self-priming multistage centrifugal pumps
Non-self-priming multistage
centrifugal pumps
Non-self-priming water-supply
unit with frequency converter
Application
"For pumping water from wells for
filling, pumping empty, transferring by pumping, irrigation and
sprinkling. As emergency pump
for overflows
For domestic water supply,
sprinkling, irrigation, spraying and
rainwater utilisation
For domestic water supply,
sprinkling, irrigation, spraying and
rainwater utilisation
Water supply / Rainwater utilisation / Irrigation and spraying
Volume flow Q max.
5 m3/h
7 m3/h
8 m3/h
55 m3/h
Delivery head H max.
50 m
57 m
57 m
8m
Technical data
ƒƒ Mains connection 1~230 V, 50
Hz / 3~400 V, 50 Hz
ƒƒ Inlet pressure max. 1 bar
ƒƒ Fluid temperature max. +5 °C
to +35 °C
ƒƒ Max. operating pressure 6 bar
ƒƒ Protection class IP 44
ƒƒ Suction/pressure side connections:
- WJ: G 1/G 1
- FWJ: G 1/R 1
- HWJ: G 1/Rp 1
ƒƒ Mains connection 1~230 V, 50 Hz
/ 3~400 V, 50 Hz
ƒƒ Inlet pressure max. 4 bar
ƒƒ Fluid temperature max. +5 °C to
+35 °C
ƒƒ Ambient temperature max. +40 °C
ƒƒ Max. operating pressure 8 bar
ƒƒ Protection class IP 54
ƒƒ Suction/pressure side connections:
- MC: Rp 1/Rp 1
- FMC: Rp 1/R 1
- HMC: Rp 1/Rp 1
ƒƒ Mains connection 1~230 V, 50 Hz
/ 3~400 V, 50 Hz
ƒƒ Inlet pressure max. 6 bar
ƒƒ Fluid tem perature max. +5 °C to
+35 °C
ƒƒ Ambient temperature max. +40 °C
ƒƒ Max. operating pressure 10 bar
ƒƒ Protection class IP 54
ƒƒ Suction/pressure side connections:
- MP 3.. Rp 1/ Rp 1; MP 6..
Rp 1¼/ Rp 1
- FMP 3.. Rp 1/ R 1; FMP6..
Rp 1¼/ R 1
- HMP 3.. Rp 1/ Rp 1; HMP 6..
Rp 1¼/ Rp 1"
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Equipment/function
ƒƒ With or without carrying frame,
depending on the version (WJ,
FWJ)
ƒƒ For single-phase AC motor
(1~230 V)
- Connection cable with plug
- On/Off switch
ƒƒ Thermal motor protection
switch
ƒƒ Directly flanged motor
ƒƒ Thermal motor protection
switch for single-phase AC
motor (1~230 V)
ƒƒ Directly flanged motor
ƒƒ Thermal motor protection
switch for 1~230 V version
ƒƒ Including 1.4 m mains connection and plug
ƒƒ Including EMC filter
ƒƒ With built-in pressure and flow
controllers
Special features
ƒƒ Ideal for portable outdoor
applications (hobby, garden)
ƒƒ HWJ version with diaphragm
pressure vessel and pressure
switch
ƒƒ FWJ version with fluid control
for system control
ƒƒ Low-noise
ƒƒ Ideal as a base-load pump for
rainwater utilisation
ƒƒ HMC version with diaphragm
pressure vessel and pressure
switch
ƒƒ FMC version with fluid control
for system control
ƒƒ Low-noise
ƒƒ Ideal as a base-load pump for
rainwater utilisation
ƒƒ HMP version with diaphragm
pressure vessel and pressure
switch
ƒƒ FMP version with fluid control
for system control
ƒƒ Heavy-duty multistage pump
with stainless steel hydraulics
ƒƒ Easy operation and adjustment:
- Large display screen (32
characters) with plain text
display
- 4 LEDs for clear status
display
- Simplified menu navigation
- Plug & Pump
ƒƒ In accordance with EMC
standards EN 61000-6-2 and
EN 61000-6-3
ƒƒ APP function: periodic analysis
of the system behaviour and
automatic adjustment of the
control parameters (PID)
ƒƒ AIS function: automatic
short-period running to prevent freezing at temperatures
< 5 °C
ƒƒ ART function: system automatically attempts to restart
after a fault
ƒƒ Float switch can be connected
as an option
Information
Online catalogue:
productfinder.wilo.com
Building Services catalogue:
Water supply
Online catalogue:
productfinder.wilo.com
Building Services catalogue:
Water supply
Online catalogue:
productfinder.wilo.com
Building Services catalogue:
Water supply
Online catalogue:
productfinder.wilo.com
Building Services catalogue: Heating,
Air-conditioning, Cooling
Max. operating pressure: 10 bar
Max. fluid temperature: 40 °C
Min. fluid temperature: 0 °C
Max. ambient temperature: 50 °C
Mains connection: 1~230 V,
50/60 Hz
Edition 2014 – Subject to change without prior notice.
11
Product range
Cistern pumps
Horizontal, multistage
centrifugal pumps
Horizontal, multistage
centrifugal pumps
Vertical, multistage
centrifugal pumps
Series
Wilo-Sub TWI 5/TWI 5-SE
Wilo-Sub TWI 5-SE PnP
Wilo-Economy MHI
Wilo-Economy MHIE
Wilo-Multivert MVIS
Field of application
Rainwater utilisation, water distribution/boosting, raw water intake
Water distribution/boosting
Water distribution/boosting
Water distribution/boosting
Design
Submersible pumps
Non-self-priming multistage
pump
Non-self-priming multistage
pump with integrated frequency
converter
Non-self-priming multistage
pump with glandless pump motor
Application
For domestic water supply from
wells, rainwater storage tanks,
and reservoirs. For irrigation,
sprinkling, rainwater utilisation or
for pumping out water
ƒƒ Water supply and pressure
boosting
ƒƒ Commerce and industry
ƒƒ Cooling water circulation
systems
ƒƒ Washing and sprinkling
systems
ƒƒ Water supply and pressure
boosting
ƒƒ Industrial circulation systems
ƒƒ Process engineering
ƒƒ Cooling water circulation
systems
ƒƒ Washing and sprinkling
systems
ƒƒ Water supply and pressure
boosting
Volume flow Q max.
16 m3/h
25 m3/h
32 m3/h
14 m3/h
Delivery head H max.
88 m
70 m
88 m
110 m
Technical data
ƒƒ Mains connection 1~230 V, 50
Hz / 3~400 V, 50 Hz
ƒƒ Fluid temperature max. +3 °C
to +40 °C
ƒƒ Max. operating pressure 10 bar
ƒƒ Protection class IP 68
ƒƒ Pressure-side connection
Rp 1¼
ƒƒ Suction-side connection for SE
version Rp 1¼
ƒƒ Fluid temperature -15 to
+110 °C
ƒƒ Max. operating pressure 10 bar
ƒƒ Inlet pressure max. 6 bar
ƒƒ Protection class IP 54
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Equipment/function
ƒƒ Connection cable, 20 m
ƒƒ TWi 5 version with standard
intake strainer
ƒƒ Variants:
- SE: with lateral inlet connecting piece
- FS: with built-in float switch
ƒƒ Thermal motor protection for
EM version (1~230 V)
ƒƒ Stainless steel pump in
monobloc design
ƒƒ Threaded connection
ƒƒ Single-phase or three-phase
AC motor
ƒƒ Single-phase AC motor with
integrated thermal motor
protection
ƒƒ Stainless steel in monobloc
design
ƒƒ Threaded connection
ƒƒ Integrated frequency converter
ƒƒ Single-phase or three-phase
AC motor
ƒƒ Three-phase version with LCD
display for status indication
ƒƒ Integrated thermal motor
protection
ƒƒ Stainless steel pump in in-line
design
ƒƒ Three-phase AC motor in
glandless pump design
Special features
ƒƒ Ready-to-plug in EM version
(1~230 V)
ƒƒ Pump (housing, stages, impellers) made entirely of stainless
steel 1.4301 (AiSi 304)
ƒƒ Self-cooling motor
ƒƒ Installation outside water is
possible
ƒƒ Thermal motor protection for
EM version (1~230 V)
ƒƒ All parts that come in contact
with the fluid are made of
stainless steel 1.4301 (AiSi
304) or 1.4404
(AiSi 316)
ƒƒ Compact design
ƒƒ All relevant components have
KTW and WRAS approval
ƒƒ Easy commissioning
ƒƒ All parts that come in contact
with the fluid are made of
stainless steel 1.4301 (AISI
304) or 14404 (AISI 316L)
ƒƒ Compact design
ƒƒ Integrated frequency converter
ƒƒ Full motor protection
ƒƒ All relevant components have
KTW and WRAS approval
ƒƒ Low-noise (up to 20 dB(A) quieter than conventional pumps
ƒƒ All parts that come in contact
with the fluid are corrosion-resistant
ƒƒ Glandless pump technology
ƒƒ All relevant components have
KTW and WRAS approval
Information
Online catalogue:
productfinder.wilo.com
Building Services catalogue:
Water supply
Online catalogue:
productfinder.wilo.com
Building Services catalogue:
Water supply
Online catalogue:
productfinder.wilo.com
Building Services catalogue: Water
supply
Online catalogue:
productfinder.wilo.com
Edition 2014 – Subject to change without prior notice.
Fluid temperature -15 to +110 °C
Max. operating pressure 10 bar
Inlet pressure max. 6 bar
Protection class IP 54
Fluid temperature -15 to +50 °C
Operating pressure 16 bar
Inlet pressure 6 bar
Protection class IP 44"
12
Building Services - Commercial Range
Product range
Vertical, multistage
centrifugal pumps
Vertical, multistage
centrifugal pumps
Vertical, multistage
centrifugal pumps
Vertical, multistage
centrifugal pumps
Series
Wilo-Multivert MVISE
Wilo-Helix V
Wilo-Helix VE
Wilo-Helix EXCEL
Field of application
Water distribution/boosting
Water distribution/boosting, professional irrigation/agriculture
Water distribution/boosting
Water distribution/boosting
Design
Non-self-priming multistage
pump with glandless pump
motor and integrated frequency
converter
Non-self-priming multistage
pump
Non-self-priming multistage
pump with integrated frequency
converter
Non-self-priming, highly
efficient, fully stainless-steel
high-pressure multistage centrifugal pump with EC motor in
vertical design with integrated
high-efficiency drive and in-line
connections
Application
ƒƒ Water supply and pressure
boosting
ƒƒ Water supply and pressure
boosting
ƒƒ Industrial circulation systems
ƒƒ Process water
ƒƒ Cooling water circulation
systems
ƒƒ Fire extinguishing systems
ƒƒ Washing systems
ƒƒ Irrigation
ƒƒ Water supply and pressure
boosting
ƒƒ Industrial circulation systems
ƒƒ Process water
ƒƒ Cooling water circulation
systems
ƒƒ Washing systems
ƒƒ Irrigation
ƒƒ Water supply and pressure
boosting
ƒƒ Industrial circulation systems
ƒƒ Process water
ƒƒ Cooling water circulation
systems
ƒƒ Washing systems
ƒƒ Irrigation
Volume flow Q max.
14 m3/h
80 m3/h
80 m3/h
58 m3/h
Delivery head H max.
110 m
280 m
240 m
243 m
Technical data
ƒƒ Fluid temperature -15 to
+50 °C
ƒƒ Operating pressure 16 bar
ƒƒ Inlet pressure 6 bar
ƒƒ Protection class IP 44
ƒ Emitted interference in compliance with EN 61000-6-1
ƒ Interference resistance in
compliance with EN 610006-2"
ƒƒ Fluid temperature -30 to +120 °C
ƒƒ Max. operating pressure 16/25/30
bar
ƒƒ Max. inlet pressure 10 bar
ƒƒ Protection class IP 55
ƒƒ Minimum efficiency index MEI ≥
0.7 (for the series)"
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ Fluid temperature: -20 to +120
°C with EPDM (-10 to +90 °C
with FKM)
ƒƒ Max. operating pressure: 16/25
bar
ƒƒ Protection class IP 55
ƒƒ Minimum efficiency index MEI ≥
0.7 (for the series)"
Equipment/function
ƒƒ Stainless steel pump in in-line
design
ƒƒ Glandless pump
ƒƒ Self-venting
ƒƒ Hydraulics in 1.4301
ƒƒ Oval flange, round flange
ƒƒ Three-phase AC motor with
integrated frequency converter and LCD display for status
indication
ƒƒ Integrated thermal motor
protection
ƒƒ Protection against low water
level
ƒƒ Impellers, stage chambers and
pump housing made of stainless
steel 1.4301/1.4404 (AISI 304L/
AISI 316L)
ƒƒ Versions with 1.44xx stainless
steel designed for aggressive
media
ƒƒ Versions
- Helix V 2 - 16, PN 16 with
oval flanges, PN 25/Pmax:
30 bar with round flanges in
accordance with ISO 2531 and
ISO 7005
- Helix V 22 - 52, PN 16 and PN
25/ Pmax: 30 bar with round
flanges in accordance with ISO
2531 and ISO 7005
ƒƒ IE2/iEC standard three-phase
AC motor"
ƒƒ Impellers, stage chambers and
pump housing made of stainless
steel 1.4301/1.4404 (AISI 304L/
AISI 316L)
ƒƒ Versions with 1.44xx stainless
steel designed for aggressive
media
ƒƒ PN 16 and PN 25/Pmax: 30
bar with round flanges in
accordance with ISO 2531 and
ISO 7005
ƒƒ IE2/IEC standard three-phase
AC motor
ƒƒ Integrated frequency converter
ƒƒ Impellers, diffusors and stage
housings made of corrosion-resistant material
ƒƒ Version in stainless steel 1.44XX
for aggressive media
ƒƒ Versions
- Helix EXCEL 2 - 16, PN 16
with oval flanges, PN 25/Pmax:
30 bar with round flanges in
accordance with ISO 2531 and
ISO 7005
- Helix EXCEL 22 - 36, PN 16
and PN 25/Pmax: 30 bar with
round flanges in accordance
with iSO 2531 and iSO 7005
ƒƒ High-efficiency EC motor
(efficiencies > IE4 acc. to IEC TS
60034-31 Ed.1)
Special features
ƒƒ Easy commissioning
ƒƒ Glandless pump technology
ƒƒ Low-noise (up to 20 dB(A)
quieter than conventional
pumps)
ƒƒ Integrated frequency converter
ƒƒ All components that come
in contact with the fluid are
made of stainless steel 1.4301
(AISI 304)
ƒƒ All relevant components have
KTW and WRAS approval
ƒƒ Efficiency-optimised, laser-welded 2D/3D high-efficiency hydraulics (MEI ≥ 0.7)
ƒƒ Easy pump replacement without pipe modification, thanks
to the modular pump housing
ƒƒ WRAS/KTW/ACS approval for
all parts that come in contact
with the fluid (EPDM version)
ƒƒ Efficiency-optimised, laser-welded 2D/3D high-efficiency hydraulics (MEI ≥ 0.7)
ƒƒ Easy pump replacement without pipe modification, thanks
to the modular pump housing
ƒƒ WRAS/KTW/ACS approval for
all parts that come in contact
with the fluid (EPDM version)
ƒƒ Efficiency-optimised, laser-welded 2D/3D high-efficiency hydraulics (MEI ≥ 0.7)
ƒƒ Integrated electronic control
“High- Efficiency Drive” with
wide control range
ƒƒ Control modes: speed control,
constant pressure, PID
ƒƒ The spacer coupling allows the
mechanical seal to be replaced
without removing the motor
(from 7.5 kW)
ƒƒ Intermediate bearings (Al203/
CW) for long service life
ƒƒ WRAS/KTW/ACS approval for
all parts that come in contact
with the fluid (EPDM version)
Information
Online catalogue:
productfinder.wilo.com
Online catalogue:
productfinder.wilo.com
Building Services catalogue:
Water supply
Online catalogue:
productfinder.wilo.com
Building Services catalogue:
Water supply
Online catalogue:
productfinder.wilo.com
Building Services catalogue:
Water supply
Fluid temperature -30 to +120 °C
Max. operating pressure 16/25 bar
Max. inlet pressure 10 bar
Protection class IP 55
Minimum efficiency index MEI ≥
0.7 (for the series)"
Edition 2014 – Subject to change without prior notice.
13
Product range
Vertical, multistage
centrifugal pumps
Vertical, multistage
centrifugal pumps
Single-pumps pressure boosting
systems
Single-pumps pressure boosting
systems with speed-controlled
pump
Series
Wilo-Multivert MVI
Wilo-Multivert MVIE
Wilo-Economy CO-1 MVIS … /ER
Wilo-Economy CO-1 MVI … /ER
Wilo-Economy CO-1 Helix V … /CE+
Wilo-Comfort-N-Vario COR-1 MVISE
Wilo-Comfort-Vario COR-1 MVIE
Wilo-Comfort-Vario COR-1 Helix VE
Wilo-SiBoost Smart 1 Helix VE
Wilo-Comfort-Vario COR-1 MHIE
Field of application
Water distribution/boosting, professional irrigation/agriculture
Water distribution/boosting, professional irrigation/agriculture
Water distribution/boosting
Water distribution/boosting
Design
Non-self-priming multistage
pump
Non-self-priming multistage
pump with integrated frequency
converter
Water supply systems with a
non-self-priming, high-pressure
multistage centrifugal pump
Water-supply units with a
non-self-priming, high-pressure
multistage centrifugal pump with
integrated speed control
Application
ƒƒ Water supply and pressure
boosting
ƒƒ Fire extinguishing systems
ƒƒ Boiler feed
ƒƒ Industrial circulation systems
ƒƒ Process engineering
ƒƒ Cooling water circulation
systems
ƒƒ Washing and sprinkling
systems
ƒƒ Water supply and pressure
boosting
ƒƒ Industrial circulation systems
ƒƒ Process engineering
ƒƒ Cooling water circulation
systems
ƒƒ Washing and sprinkling
systems
For fully automatic water supply
in inlet mode from the public
water supply network or from a
reservoir
ƒƒ For pumping potable water,
process water, cooling water,
water for fire-fighting or other
service water
For fully automatic water supply
in inlet mode from the public
water supply network or from a
reservoir
ƒƒ For pumping potable water,
process water, cooling water,
water for fire-fighting or other
service water
Volume flow Q max.
155 m3/h
145 m3/h
135 m3/h
165 m3/h
Delivery head H max.
240 m
245 m
160 m
160 m
Technical data
ƒƒ Fluid temperature -15 to
+120 °C
ƒƒ Max. operating pressure 16/25
bar
ƒƒ Max. inlet pressure 10 bar
ƒƒ Protection class IP 55
ƒƒ Minimum efficiency index MEI
≥ 0.1 (for the series)
ƒƒ Fluid temperature -15 to
+120 °C
ƒƒ Max. operating pressure 16
bar/25 bar
ƒƒ Max. inlet pressure 10 bar
ƒƒ Protection class IP 54 or IP 55
ƒƒ Minimum efficiency index MEI
≥ 0.1 (for the series)
ƒƒ Mains connection 3~230 V / 400
V, 50 Hz
ƒƒ Max. fluid temperature 50 °C
ƒƒ Operating pressure 10/16 bar
ƒƒ Inlet pressure 6/10 bar
ƒƒ Switching pressure stages 6 / 10
/ 16 bar
ƒƒ Protection class IP 41/IP 54
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Equipment/function
ƒƒ Stainless steel pump in in-line
design
ƒƒ Versions
- MVI 1.. to 8.. PN 16 with oval
flanges and PN 25 with round
DIN flanges
- MVI 70.. to 95.. PN 16/PN 25
with round DIN flanges
- Victaulic connections (PN 25)
depending on pump type
ƒƒ IE2/IEC standard motor,
2-pole, AC or DC version.
Single-phase AC motor with
integrated thermal motor
protection
ƒƒ Stainless steel pump in in-line
design
ƒƒ Versions
- PN 16 with oval flanges
- PN 16/25 with DIN round
flange
- Victaulic connections
depending on pump type
ƒƒ Integrated frequency converter
ƒƒ IE2/IEC standard motor,
2-pole, AC or DC version.
Single-phase AC motor with
integrated thermal motor
protection
ƒƒ Protection against low water
level
ƒƒ 1 pump of the MVIS, MVI or
Helix V series
ƒƒ Components that come in
contact with fluid are corrosion-resistant
ƒƒ Base frame made of stainless
steel 1.4301 with height-adjustable vibration absorbers for
insulation against structure-borne noise
ƒƒ Pipework made of stainless
steel 1.4571
ƒƒ Check valve, on the pressure
side
ƒƒ Non-return valve, on the
pressure side
ƒƒ Diaphragm pressure vessel 8 l,
PN 16, on pressure side
ƒƒ 1 pump of the MVIE, Helix VE,
MHIE or MVISE series with integrated frequency converter
ƒƒ All parts that come in contact
with the fluid are corrosion-resistant
ƒƒ Pipework made of stainless
steel 1.4571
ƒƒ Check valve, on the pressure
side
ƒƒ Non-return valve, on the
pressure side
ƒƒ Diaphragm pressure vessel 8
l, PN 16
Special features
ƒƒ MVI 1..-8.. All parts that come
in contact with the fluid are
made of stainless steel 1.4301
(AISI 304) or 1.4404 (AISI 316L)
ƒƒ MVI 70..-95.. depending on
pump type in stainless steel
1.4404 (AISI 316L) or 1.4301
(AISI 304) with pump housing
made of cataphoretic-coated
EN-GJL-250 cast iron
ƒƒ All relevant components have
KTW and WRAS approval
ƒƒ Other sizes (MVI 16..-6, MVI
16, MVI 32 and MVI 52) are
offered only outside the EU
member states.
ƒƒ Large control range
ƒƒ MVIE 2..-8..
All parts that come in contact
with the fluid are made of
stainless steel 1.4301 (AISI
304) or 1.4404 (AISI 316L)
ƒƒ MVIE 70..-95..
depending on pump type in
stainless steel 1.4404 (AISI
316L) or 1.4301 (AISI 304)
with pump housing made of
cataphoretic-coated ENGJL-250 cast iron
ƒƒ All relevant components have
KTW and WRAS approval
ƒƒ Other sizes (MVIE 16..-6, MVIE
16, MVIE 32 and MVIE 52) are
offered only outside the EU
member states
For systems with MVIS pump
ƒƒ Up to 20 dB(A) quieter than
comparable systems
For systems with MVISE pump
ƒƒ Up to 20 dB(A) quieter than
comparable systems
For systems with Helix V pump
ƒƒ IE2 standard motors
ƒƒ Optimised hydraulics
ƒƒ Cartridge mechanical seal
ƒƒ Systems with MVI 16..-6, 16,
32, 52 are offered only outside
the EU member states
For systems with Helix VE pump
ƒƒ IE2 standard motors
ƒƒ Optimised hydraulics
ƒƒ Cartridge mechanical seal
ƒƒ Pressure boosting systems
with installed pumps MVIE
16..-6, MVIE 16, MVIE 32 and
MVIE 52 are offered only outside the EU member states.
Online catalogue:
productfinder.wilo.com
Building Services catalogue:
Water supply
Online catalogue:
productfinder.wilo.com
Building Services catalogue:
Water supply
Online catalogue:
productfinder.wilo.com
Building Services catalogue:
Water supply
Online catalogue:
productfinder.wilo.com
Building Services catalogue:
Water supply
Information
Edition 2014 – Subject to change without prior notice.
Mains connection 3~400 V, 50 Hz
Max. fluid temperature 50 °C
Operating pressure 10/16 bar
Inlet pressure 6/10 bar
Protection class IP 44/IP 54"
14
Building Services - Commercial Range
Product range
Multi-pump pressure boosting systems
Multi-pump pressure boosting systems with
speed controlled pumps
Backflow preventing booster system
Series
Wilo-Economy CO 2-4 MHi … /ER Wilo-ComfortN-CO 2-6 MViS … /CC Wilo-Comfort-CO 2-6
MVi … /CC
Wilo-Comfort-CO 2-6 Helix V … /CC
Wilo-Comfort-Vario-COR2-4MHiE…/VR
Wilo-Comfort-N-Vario-COR2-4MViSE…/VR
Wilo-Comfort-Vario-COR2-4MViE…/VRWilo-Comfort-Vario
COR2-4HelixVE…
CAT5 Booster Set
Field of application
Water distribution/boosting
Water distribution/boosting
Non domestic hose union taps
bin washdown, garden irrigation
laboratories, mortuary and embalming
equipment, butchery and slaughter-house
equipment
Design
Pressure boosting system with 2 to 6 nonself-priming, stainless steel, high- pressure,
multistage centrifugal pumps switched in
parallel
Pressure boosting system with 2 to 4 nonself-priming, stainless steel, high- pressure,
multistage centrifugal pumps switched in
parallel, with integrated speed control
The sets are provided with a single fixed speed
pump, MHI or a variable speed pump, MHIE.
Application
For fully automatic water supply and pressure
boosting in residential and office buildings
and in industrial systems
ƒƒ For pumping potable water and process
water, cooling water, water for fire-fighting
or other service water
For fully automatic water supply and pressure
boosting in residential and office buildings and
in industrial systems
ƒƒ For pumping potable water and process
water, cooling water, water for fire-fighting
or other service water
ƒƒ The MHI sets are controlled via pressure
switch, DOL motor starter and run on timer
ƒƒ The MHIE sets are controlled via pressure
transducer and motor mounted inverter
ƒƒ All are complete with a non return valve,
pressure gauge, 8lt vessel and outlet isolation valve and tank draincock
ƒƒ The water level in the break tank is controlled via ½” BS1212 equilibrium float
valve which provides a flow rate of 1.2 l/s at
a minimum inlet pressure of 1 bar
ƒƒ Low level protection is provided via side
mounted float switch
Volume flow Q max.
800 m3/h
650 m3/h
Delivery head H max.
160 m
159 m
Technical data
ƒƒ Mains connection 3~230 V / 400 V, 50 Hz
ƒƒ Max. fluid temperature 50 °C
ƒƒ Operating pressure 10/16 bar
ƒƒ Inlet pressure 6/10 bar
ƒƒ Protection class IP 54"
ƒƒ Mains connection 3~400 V,
50/60 Hz, depending on type also 1~230 V,
50/60 Hz
ƒƒ Max. fluid temperature 70 °C
ƒƒ Operating pressure 10/16 bar
ƒƒ Inlet pressure 6/10 bar
ƒƒ Protection class IP 54
ƒƒ Inlet: ½” BSP
ƒƒ Outlet: 1” BSP
ƒƒ BMS: Volt free connection for pump fault
Equipment/function
ƒƒ 2 to 4 or 2 to 6 pumps per system
ƒƒ Components that come in contact with
fluid are corrosion-resistant
ƒƒ Base frame, galvanised, with height- adjustable vibration absorbers
ƒƒ Pipework made of stainless steel 1.4571
ƒƒ Check valve at each pump, on the suction
and pressure sides
ƒƒ Non-return valve, on the pressure side
ƒƒ Diaphragm pressure vessel 8 l, PN 16, on
pressure side
ƒƒ Pressure sensor, on the discharge side
ƒƒ 2 to 4 pumps per system
ƒƒ Continuous auto control due to pumps with
integrated frequency converters
ƒƒ Components that come in contact with fluid
are corrosion-resistant
ƒƒ Base frame, galvanised, with height- adjustable vibration absorbers
ƒƒ Pipework made of stainless steel 1.4571
ƒƒ Check valve at each pump, on the suction
and pressure sides
ƒƒ Non-return valve, on the pressure side
ƒƒ Diaphragm pressure vessel 8 l, PN 16, on
pressure side
ƒƒ Pressure sensor, on the discharge side
ƒƒ The booster set monitors the system pressure and as demand increases the pressure
will fall and the pump will start and continue
to run, until demand has stopped and pressure increases to the set point
ƒƒ The fixed speed booster sets have a run on
timer that overrides the pressure switch for a
set period to minimise the number of starts
per hour
Special features
ƒƒ Compact system in accordance with the
requirements of DIN 1988 (EN 806)
ƒƒ Series with Helix V with iE2 motors
For systems with MVIS pumps
ƒƒ Up to 20 dB(A) quieter than comparable
systems
ƒƒ Systems with MVI 16..-6, 16, 32, 52 are
offered only outside the EU member states
ƒƒ Compact system with excellent value for
money due to high-pressure, multistage
centrifugal pumps with integrated frequency converters
ƒƒ Integrated full motor protection via PTC
ƒƒ Integrated dry-running detection and low
water cut-out switch
ƒƒ Series with Helix VE with iE2 motors
For systems with MVIS pumps
ƒƒ Up to 20 dB(A) quieter than comparable
systems
ƒƒ Systems with MVIE 16..-6, 16, 32, 52 are
offered only outside the EU member states
Online catalogue:
productfinder.wilo.com
Building Services catalogue:
Water supply
Online catalogue:
productfinder.wilo.com
Building Services catalogue:
Water supply
Information
Edition 2014 – Subject to change without prior notice.
15
Product range
Pressure boosting
system
Pressure boosting
system
Product range
Standard glanded pumps
Standard glanded pumps
Series
Wilo-Hydroplus-E
(EBMS 2G)
Wilo-Comfort-Vario
COR-1 MHI/VR
Series
Wilo-CronoNorm-NL
Wilo-CronoNorm-NLG
Wilo-VeroNorm-NPG
Pumps
Horizontal and Vertical
multi stage design
of stainless steel
construction, WRC
approved.
Horizontal multi stage
design of stainless
steel construction,
WRC approved
Field of application
Heating, air-conditioning,
cooling, water supply, industrial
process
Heating, air-conditioning, cooling,
water supply, industrial process
Design
Totally enclosed fan
cooled (TEFC), IP54,
class F, 400 volts,
three phase, direct
on line (DOL) starting
via pump mounted
inverter
Totally enclosed fan
cooled (TEFC), IP54,
class F, 230 volts, three
phase, direct on line
(DOL) starting via panel mounted inverter
Single-stage low-pressure centrifugal pump with axial suction,
according to EN 733 and ISO
5199, mounted on a baseplate
Single-stage low-pressure centrifugal pump with axial suction,
according to ISO 5199, mounted on
a baseplate
Application
Each pump has an
inbuilt inverter, giving
maximum reliability
and flexibility. Each
inverter has a LCD providing status of pump
(on/off/faults), each
inverter is equipped
with dry running
protection
Each pump has a dedicated panel mounted
inveter, giving maximum reliability and
flexibility. The inverters typically employed
are panel mounted 6
pulse PWM type
inverter
ƒƒ Pumping clean or slightly
contaminated water (max. 20
ppm) without solid matter, for
circulation, transfer and pressure boosting purposes
ƒƒ Pumping heating water in
accordance with VDI 2035,
water/glycol mixtures, cooling/
cold water and process water
ƒƒ Applications in municipal water
supply, irrigation, building services, general industry, power
stations, etc.
ƒƒ Pumping clean or slightly
contaminated water (max. 20
ppm) without solid matter, for
circulation, transfer and pressure
boosting purposes
ƒƒ Pumping heating water in accordance with VDI 2035, water/
glycol mixtures, cooling/cold
water and process water
ƒƒ Applications in municipal water
supply, irrigation, building services, general industry, power
stations, etc.
Volume flow Q max.
650 m3/h
2,800 m3/h
Delivery head H max.
150 m
140 m
Pipe work
Stainless steel 14571,
sized in accordance
with the overall hydraulic performance of
the unit
Stainless steel 14571,
sized in accordance
with the overall hydraulic performance of
the unit
Technical data
Valves
DVGW certificated
nickel-plated isolation
and non-return valves
DVGW certificated
nickel-plated isolation
and non-return valves
Pressure
sensor
Heavy duty piezoresistive type transducers
(4-20ma).
Heavy duty piezoresistive type transducers
(4-20ma)
ƒƒ Permitted temperature range
of the fluid -20 °C to +120 °C
ƒƒ Mains connection 3~400 V,
50 Hz
ƒƒ Minimum efficiency index MEI
≥ 0.1 (for the series)
ƒƒ Protection class IP 55
ƒƒ Nominal diameter on suction
side DN 50 to DN 500
ƒƒ Nominal diameter on pressure
side DN 32 to DN 500
ƒƒ Max. operating pressure: varies
according to type and application – up to 16 bar
ƒƒ Permitted temperature range
of the fluid -20 °C to +120 °C
(depending on type)
ƒƒ Mains connection 3~400 V, 50 Hz
ƒƒ Minimum efficiency index MEI ≥
0.1 (for the series)
ƒƒ Protection class IP 55
ƒƒ Nominal diameters: DN 150 to
DN 500 (depending on type)
ƒƒ Max. operating pressure: varies
according to type and application
– up to 16 bar
Accumulator
1 x 8 litre MWP 16 bar,
WRc approved c/w
through flow shutoff
valve for testing and
draining
1 x 8 litre MWP 16 bar,
WRc approved c/w
through flow shutoff
valve for testing and
draining
Equipment/function
Control panel
ABS enclosure, IP54
protection class with
isolator and fused
protection per pump.
The EBMS control
board is fitted inside
inverter no.1. The
control board allows
fully automatic control
upto a maximum of 3
pumps in parallel. The
set point can be easily
adjusted via a potentiometer mounted on
the control board
VR-230V central control unit of fully electronic modular design
for automatic control
of a maximum of
3parallel pumps, which
contain integrated
frequency converters
for the speed control.
Sheet steel enclosure,
IP54 protection class,
with door interlocked
isolator, LC display,
access to operation
control parameters via
a single
dial/ pushbutton
ƒƒ Single-stage horizontal spiral
housing pump with bearing
bracket and exchangeable stationary wear rings in process
design
ƒƒ Shaft sealing with mechanical
seals in accordance with EN
12756 or packing stuffing box
ƒƒ Spiral housing with cast pump
bases
ƒƒ Shaft coupling with intermediate sleeve
ƒƒ Single-stage horizontal spiral
housing pump with bearing
bracket and exchangeable
stationary wear rings (NLG only)
in process design
ƒƒ Shaft sealing with mechanical
seals in accordance with EN
12756 or packing stuffing box
ƒƒ Spiral housing with cast pump
bases
ƒƒ Greased grooved ball bearings for
bearing of pump shaft
Materials:
ƒƒ Pump housing and pressure lid:
EN-GJS-500-7
ƒƒ Bearing bracket: EN-GJL-250
ƒƒ Impeller: EN-GJL-250
ƒƒ Shaft: 1.4028
ƒƒ Stationary wear rings:
G-CuSn10
ƒƒ Mechanical seal: AQ1EGG
ƒƒ Other materials on request
Materials for NLG:
ƒƒ Pump housing and pressure lid:
EN-GJS-500-7
ƒƒ Bearing bracket: EN-GJL-250
ƒƒ Impeller: EN-GJL-250
ƒƒ Shaft: 1.4028
ƒƒ Stationary wear rings: G-CuSn10
ƒƒ Mechanical seal: AQ1EGG Materials
for NPG:
ƒƒ Pump housing: EN-GJL-250
ƒƒ Impeller: EN-GJL-250
ƒƒ Shaft: 1.4028
ƒƒ Other materials on request
Max working Pressure:
MHIE: 10 Bar
MVIE: 16 Bar
Voltage:
400V/3PH/50HZ
Protection Index: IP54
EMC Compliance:
EN61000-6-2/3
Max working 10 Bar
Voltage:
230V/1PH/50Hz
Protection Index: IP54
EMC Compliance:
EN61000-6-2/3
Special features
ƒƒ Motors with higher efficiency
as standard; motors with iE2
technology if rated motor
power is 0.75 kW or more
ƒƒ Motors with higher efficiency
as standard; motors with iE2
technology if rated motor power
is 0.75 kW or more
ƒƒ Worldwide obtainability of
standard motors and mechanical
seals
Information
Online catalogue:
productfinder.wilo.com
Online catalogue:
productfinder.wilo.com
Motor
Inverter
Design
Edition 2014 – Subject to change without prior notice.
16
Building Services - Commercial Range
Product range
Packaged pressurisation units
Control devices
Glanded energy-saving pumps in
in-line design
Glanded energy-saving pumps in
in-line design
Series
Wilo-Comfort Series
P135, P235, P160,
P260, P180, P280
Wilo-CC-HVAC system
Wilo-CCe-HVAC system
Wilo-VR-HVAC system
Wilo-SC-HVAC system
Wilo-VeroLine-IP-E
Wilo-VeroTwin-DP-E
Wilo-CronoLine-IL-E
Wilo-CronoTwin-DL-E
Field of application
Heating, air-conditioning, cooling
Heating, air-conditioning, cooling
Heating, air-conditioning, cooling, industrial process
Heating, air-conditioning, cooling, industrial process
Design
The comfort controller works
on a closed loop pressure control via an analogue pressure
transducer and an electronic
micro processor ensuring accurate measurement and feed
back of system condition.
Electronically controlled glanded
pump in in-line design with flange
connection and automatic power
adjustment
Electronically controlled glanded
pump in in-line design with flange
connection and automatic power
adjustment
Application
The control philosophy allows the
duty pump to run, ensuring the
cold fill pressure is met. 2 pump
models will rotate the duty automatically between both pumps
ensuring even wear; if the duty
pump fails the standby pump will
start automatically.
Switchgear for controlling 1 to
6 pumps
ƒƒ For pumping heating water (in
accordance with VDI 2035),
water-glycol mixtures and
cooling and cold water without
abrasive substances in heating,
cold water and cooling water
systems
ƒƒ For pumping heating water (in
accordance with VDI 2035),
water-glycol mixtures and
cooling and cold water without
abrasive substances in heating,
cold water and cooling water
systems
Volume flow Q max.
–
–
170 m3/h
680 m3/h
Delivery head H max.
–
–
30 m
65 m
Technical data
ƒƒ 5 ¼ turn mini ball valves
ƒƒ ½” in brass and braided flexible
hoses
ƒƒ ¼” in brass and nylon tubing
ƒƒ Input supply 230v/1ph/50Hz
ƒƒ Volt free contact Max 5A at
230Vac
ƒƒ Switching Volt free contact
Max 10A at 230Vac
–
ƒƒ Permitted temperature range of
the fluid -20 °C to +120 °C
ƒƒ Mains connection:
3~440 V ±10 %, 50/60 Hz
3~400 V ±10 %, 50/60 Hz
3~380 V -5 %/+10 %, 50/60 Hz
ƒƒ Minimum efficiency index MEI ≥
0.1 (for the series)
ƒƒ Protection class IP 55
ƒƒ Nominal diameter DN 32 to DN 80
ƒƒ Max. operating pressure 10 bar
(special version: 16 bar)
ƒƒ Permitted temperature range of
the fluid -20 °C to +140 °C
ƒƒ Mains connection:
3~440 V ±10 %, 50/60 Hz
3~400 V ±10 %, 50/60 Hz
3~380 V -5 %/+10 %, 50/60 Hz
ƒƒ Minimum efficiency index MEi ≥
0.1 (for the series)
ƒƒ Protection class IP 55
ƒƒ Nominal diameter DN 40 to DN 80
ƒƒ Max. operating pressure 16 bar
Equipment/function
To ensure efficient operation of
the sealed system the comfort
controller also monitors the number of pump starts and changes in
pressure providing excess starts
or system leak alarms if operating
out of the standard parameters
Wilo-CC-HVAC system
ƒƒ Comfort control system for 1
to 6 pumps switched in parallel,
with fixed speed
Wilo-CCe-HVAC system
ƒƒ Comfort control system for 1 to
6 pumps with integrated electronics/ speed control or external
frequency converter control
Wilo-VR-HVAC system
ƒƒ Vario controller for 1 to 4 pumps
switched in parallel, with integrated speed control
Wilo-SC-HVAC system
ƒƒ Smart controller for 1 to 4 pumps
switched in parallel
ƒƒ SC and SC-FC versions for
standard pumps with fixed speed
ƒƒ SCe version for infinitely variable,
electronically controlled pumps
or pumps with integrated frequency converter
ƒƒ Single-stage, low-pressure
centrifugal pump in in-line
design with
ƒƒ Mechanical seal
ƒƒ Flange connection
ƒƒ Motor with integrated electronic control
ƒƒ DP-E with switchover valve
ƒƒ Single-stage, low-pressure
centrifugal pump in in-line
design with
ƒƒ Mechanical seal
ƒƒ Flange connection
ƒƒ Lantern
ƒƒ Coupling
ƒƒ Motor with integrated electronic control
ƒƒ DL-E with switchover valve
Materials:
ƒƒ Pump housing and lantern:
EN-GJL-250
ƒƒ Impeller: PPO-GF30
ƒƒ Shaft: 1.4021
ƒƒ Mechanical seal: AQEGG, other
mechanical seals on request
Materials:
ƒƒ Pump housing and lantern:
EN-GJL-250
ƒƒ Impeller:
Standard version: EN-GJL-200
Special version: G-CuSn 10
ƒƒ Shaft: 1.4122
ƒƒ Mechanical seal: AQEGG, other
mechanical seals on request
Special features
ƒƒ Main control PCB
ƒƒ Display PCB
ƒƒ Pressure Transducer
ƒƒ Flexible hose c/w wingnuts
ƒƒ ½” non-return valve
ƒƒ 1.2” inlet ball float valve
ƒƒ 4” float to suit above
ƒƒ Float switch
ƒƒ Special versions on request
ƒƒ Motors with higher efficiency
as standard; motors with iE2
technology if rated motor
power is 0.75 kW or more
ƒƒ Energy savings due to integrated electronic control
ƒƒ Optional interfaces for bus
communication using plug-in
IF-Modules
ƒƒ Integrated dual pump management
ƒƒ Integrated full motor protection (PTC thermistor sensor)
with trip electronics
ƒƒ Motors with iE2 technology
for higher efficiency fitted as
standard
ƒƒ Energy savings due to integrated electronic control
ƒƒ Optional interfaces for bus
communication using plug-in
IF-Modules
ƒƒ Integrated dual pump management
ƒƒ Integrated full motor protection (PTC thermistor sensor)
with trip electronics
Information
Online catalogue:
productfinder.wilo.com
Building Services catalogue:
Heating, air-conditioning, cooling
Online catalogue:
productfinder.wilo.com
Building Services catalogue:
Heating, air-conditioning, cooling
Online catalogue:
productfinder.wilo.com
Building Services catalogue:
Heating, air-conditioning, cooling
Online catalogue:
productfinder.wilo.com
Building Services catalogue:
Heating, air-conditioning, cooling
Edition 2014 – Subject to change without prior notice.
17
Product range
Glanded standard pumps in
in-line design
Glanded standard pumps in
in-line design
Special glanded pumps in in-line
design
Special glanded pumps in in-line
design
Series
Wilo-VeroLine-IPL
Wilo-VeroTwin-DPL
Wilo-CronoLine-IL
Wilo-CronoTwin-DL
Wilo-VeroLine-IPH-W
Wilo-VeroLine-IPH-O
Wilo-VeroLine-IPS
Field of application
Heating, air-conditioning, cooling, industrial process
Heating, air-conditioning, cooling, industrial process
Heating, air-conditioning, cooling, industrial process
Heating, air-conditioning, cooling, industrial process
Design
Glanded pump in in-line design
with screwed connection or
flange connection
Glanded pump in in-line design
with flange connection
Glanded pump in in-line design
with flange connection
Glanded pump in in-line design
with screwed connection or
flange connection
Application
For pumping heating water (in
accordance with VDI 2035),
water-glycol mixtures and cooling
and cold water without abrasive
substances in heating, cold water
and cooling water systems
For pumping heating water (in
accordance with VDI 2035),
water-glycol mixtures and cooling
and cold water without abrasive
substances in heating, cold water
and cooling water systems
IPH-W: For pumping hot water
without abrasive substances
in closed industrial circulation
systems, district heating, closed
heating systems, etc.
IPH-O: For pumping heat transfer
oil in closed industrial circulation
systems
For pumping cold and hot water
(in accordance with VDI 2035)
without abrasive substances in
heating, cold water and cooling
water systems
Volume flow Q max.
245 m3/h
1,150 m3/h
80 m3/h
13 m3/h
Delivery head H max.
52 m
110 m
38 m
3m
Technical data
ƒƒ Permitted temperature range
of the fluid -20 °C to +120 °C
ƒƒ Mains connection 3~400 V,
50 Hz
ƒƒ Minimum efficiency index MEI
≥ 0.1 (for the series)
ƒƒ Protection class IP 55
ƒƒ Nominal diameter Rp 1 to
DN 100
ƒƒ Max. operating pressure 10 bar
(special version: 16 bar)
ƒƒ Permitted temperature range
of the fluid -20 °C to +140 °C
ƒƒ Mains connection 3~400 V,
50 Hz
ƒƒ Minimum efficiency index MEI
≥ 0.1 (for the series)
ƒƒ Protection class IP 55
ƒƒ Nominal diameter DN 32 to
DN 250
ƒƒ Max. operating pressure 16 bar
(25 bar on request)
ƒƒ Permitted temperature range of
the fluid IPH-W: -10 °C to +210
°C (at max. 23 bar)
ƒƒ Permitted temperature range of
the fluid IPH-O: -10 °C to +350 °C
(at max. 9 bar)
ƒƒ Mains connection 3~400 V, 50 Hz
ƒƒ Protection class IP 55
ƒƒ Nominal diameter DN 20 to DN 80
ƒƒ Permitted temperature range of
the fluid -10 °C to +140 °C
ƒƒ Mains connection 3~230 V, 3~400
V, 50 Hz
ƒƒ Minimum efficiency index MEI ≥
0.1 (for the series)
ƒƒ Protection class IP 55
ƒƒ Nominal diameter Rp 1, DN 40
and DN 50
ƒƒ Max. operating pressure 10 bar, or
6 bar for flange connection
Equipment/function
Single-stage, low-pressure
centrifugal pump in in-line design
with
ƒƒ Mechanical seal
ƒƒ Flange connection with
pressure measuring connection
R 1/8
ƒƒ Motor with one-piece shaft
ƒƒ DPL with switchover valve
Single-stage, low-pressure
centrifugal pump in in-line design
with
ƒƒ Mechanical seal
ƒƒ Flange connection with
pressure measuring connection
R 1/8
ƒƒ Lantern
ƒƒ Coupling
ƒƒ IEC standard motor
ƒƒ DL with switchover valve
Single-stage, low-pressure centrifugal pump in in-line design with
ƒƒ Mechanical seal
ƒƒ Flange connection
ƒƒ Lantern
ƒƒ Motor with special shaft
Single-stage, low-pressure centrifugal pump in in-line design with
ƒƒ Mechanical seal or stuffing box
packing
ƒƒ Screwed or flange connection
with pressure measuring connection R 1/8
ƒƒ Standard motor
Materials:
ƒƒ Pump housing and lantern:
EN-GJL-250
ƒƒ Impeller: PPO fibreglass-reinforced/ EN-GJL-200 (depending on pump type)
ƒƒ Shaft: 1.4021
ƒƒ Mechanical seal: AQEGG, other
mechanical seals on request
Materials:
ƒƒ Pump housing and lantern:
EN-GJL-200
ƒƒ Impeller: plastic
ƒƒ Shaft: 1.4021
ƒƒ Mechanical seal: BVEGG, other
mechanical seals on request
Materials:
ƒƒ Pump housing and lantern:
Standard version: EN-GJL-250
Optional: EN-GJS-400-18
ƒƒ Impeller:
Standard: EN-GJL-200 Special
version: G-CuSn 10
ƒƒ Shaft: 1.4122
ƒƒ Mechanical seal: AQEGG, other
mechanical seals on request
Special features
ƒƒ Motors with higher efficiency
as standard; motors with iE2
technology if rated motor
power is 0.75 kW or more
ƒƒ Standard condensate drainage
holes in the motor housings
and lanterns
ƒƒ Series version: Motor with
one-piece shaft
ƒƒ Version N: Standard motor B5
or V1 with stainless steel plug
shaft
ƒƒ Bidirectional mechanical seal
with forced flushing
ƒƒ Easy to install due to feet
with threaded holes on pump
housing"
ƒƒ Motors with higher efficiency
as standard; motors with iE2
technology if rated motor
power is 0.75 kW or more
ƒƒ Standard condensate drainage
holes in the motor housings
ƒƒ Can be used flexibly in
air-conditioning and cooling
systems, with application
benefits due to direct draining
of condensate (patented)
ƒƒ Bidirectional mechanical seal
with forced flushing
ƒƒ Worldwide obtainability of
standard motors and mechanical seals
ƒƒ Feet with threaded holes on
pump housing
ƒƒ From 0.75 kW, motors
equipped as standard with
IE2 technology with higher
efficiency
ƒƒ Bidirectional, self-cooled
mechanical seal
ƒƒ Great variety of applications
due to a wide fluid temperature range with- out additional
wearing parts
ƒƒ Worldwide availability of the
standard motors used
Information
Online catalogue:
productfinder.wilo.com
Building Services catalogue: Heating,
air-conditioning, cooling
Online catalogue:
productfinder.wilo.com
Building Services catalogue:
Water supply
Online catalogue:
productfinder.wilo.com
Online catalogue:
productfinder.wilo.com
Edition 2014 – Subject to change without prior notice.
18
Building Services - Commercial Range
Product range
Glanded monobloc pumps
Glanded monobloc pumps
Series
Wilo-CronoBloc-BL
Wilo-BAC
Field of application
Heating, air-conditioning, cooling, industrial process
Heating, air-conditioning, cooling, industrial process
Design
Glanded pump in monobloc design with flange connection
Glanded pump in monobloc
design with screwed connection
or Victaulic connection
Application
For pumping cold and hot water
(in accordance with VDI 2035)
without abrasive substances in
heating, cold water and cooling
water systems
For pumping water-glycol
mixtures with a glycol volume
proportion of 20 to 40%
Volume flow Q max.
360 m3/h
80 m3/h
Delivery head H max.
105 m
25 m
Technical data
ƒƒ Permitted temperature range
of the fluid -20 °C to +140 °C
ƒƒ Mains connection 3~400 V,
50 Hz
ƒƒ Minimum efficiency index MEI
≥ 0.1 (for the series)
ƒƒ Protection class IP 55
ƒƒ Nominal diameter DN 32 to
DN 150
ƒƒ Max. operating pressure 16 bar
(25 bar on request)
ƒƒ Permitted temperature range of
the fluid -15 °C to +60 °C
ƒƒ Mains connection 3~400 V, 50 Hz
ƒƒ Minimum efficiency index MEI ≥
0.1 (for the series)
ƒƒ Protection class IP 54
ƒƒ Nominal diameter G2/G 1½
(only BAC 40…/S) or Victaulic
connection
Ø 60.3/48.3 mm (BAC 40… /R)
Ø 76.1/76.1 mm (BAC 70…/R)
ƒƒ Max. operating pressure 6.5 bar
Equipment/function
Single-stage low-pressure centrifugal pump in monobloc design,
with axial suction port and radially
arranged pressure port with
ƒƒ Mechanical seal
ƒƒ Flange connection with
pressure measuring connection
R 1/8
ƒƒ Lantern
ƒƒ Coupling
ƒƒ IEC standard motor
"Single-stage low-pressure centrifugal pump in monobloc design,
with axial suction port and radially
arranged pressure port
Materials:
ƒƒ Pump housing: PA 6.6 50 % GF
ƒƒ Impeller: PA/PPO, fibreglassreinforced
ƒƒ Shaft: X30Cr13
ƒƒ Mechanical seal: BQEGG
Materials:
ƒƒ Pump housing (standard): ENGJL-250;
optional: EN-GJS-400-18
ƒƒ Impeller (standard): ENGJL-200 Special version: red
brass G-CuSn10
ƒƒ Shaft: 1.4122
ƒƒ Mechanical seal: AQEGG, other
mechanical seals on request
Special features
ƒƒ Motors with higher efficiency
as standard; motors with iE2
technology if rated motor
power is 0.75 kW or more
ƒƒ Meets user requirements due
to performance and main
dimensions in accordance with
EN 733
ƒƒ Motors with higher efficiency
as standard; motors with iE2
technology if rated motor
power is 0.75 kW or more
ƒƒ Reduced life cycle costs due to
optimised efficiency
ƒƒ Pump housing in plastic design
ƒƒ Version with Victaulic or
threaded connection (BAC
70/135... with Victaulic connection only)
Information
Online catalogue:
productfinder.wilo.com
Online catalogue:
productfinder.wilo.com
Edition 2014 – Subject to change without prior notice.
WILO UK Limited
Centrum 100, Second Avenue
Burton on Trent, Staffs DE14 2WJ
T +44 (0) 1283 523000
F +44 (0) 1283 523099
[email protected]
www.wilo.co.uk
Pioneering for You
More contact details at www.wilo.co.uk
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement