WILO UK Limited Centrum 100, Second Avenue T +44 (0) 1283 523000

WILO UK Limited Centrum 100, Second Avenue T +44 (0) 1283 523000
WILO UK Limited
Centrum 100, Second Avenue
Burton on Trent, Staffs DE14 2WJ
T +44 (0) 1283 523000
F +44 (0) 1283 523099
[email protected]
www.wilo.co.uk
Wilo Ireland
Unit B1, Corcanree Business Park
Dock Road, Limerick, Ireland
T: +353 (0)61 227566
F: +353 (0)61 229017
[email protected]
www.wilo.ie
Future proof high efficiency
products from Wilo.
Range Guide.
Building Services - Commercial.
Product category
Glanded energy-saving pumps in
in-line design
Series
Wilo-VeroLine-IP-E
Wilo-VeroTwin-DP-E
Product category
Glanded energy-saving pumps in
in-line design
Series
Wilo-CronoLine-IL-E
Wilo-CronoTwin-DL-E
Product category
Glanded standard pumps in
in-line design
Series
Wilo-VeroLine-IPL
Wilo-VeroTwin-DPL
Product category
Glanded standard pumps in
in-line design
Series
Wilo-CronoLine-IL
Wilo-CronoTwin-DL
Design
Electronically controlled glanded pump in
in-line design with flange connection and
automatic power adjustment
Design
Electronically controlled glanded pump in
in-line design with flange connection and
automatic power adjustment
Design
Glanded pump in in-line design with
threaded connection or flange connection
Design
Glanded pump in in-line design with flange
connection
Application
For pumping heating water (in accordance
with VDI 2035), water-glycol mixtures and
cooling and cold water without abrasive
substances in heating, cold water and
cooling water systems
Application
For pumping heating water (in accordance
with VDI 2035), water-glycol mixtures and
cooling and cold water without abrasive
substances in heating, cold water and
cooling water systems
Application
For pumping heating water (in accordance
with VDI 2035), water-glycol mixtures and
cooling and cold water without abrasive
substances in heating, cold water and
cooling water systems
Application
For pumping heating water (in accordance
with VDI 2035), water-glycol mixtures and
cooling and cold water without abrasive
substances in heating, cold water and
cooling water systems
Q max.
170 m³/h
Q max.
680 m³/h
Q max.
245 m³/h
Q max.
1,150 m³/h
H max.
30 m
H max.
65 m
H max.
52 m
H max.
110 m
Technical data
• Permissible temperature range -20 °C to
+120 °C
• Mains connection:
3~400 V, 50 Hz;
3~380 V, 60 Hz
• Protection class IP 55
• Nominal diameter DN 32 to DN 80
• Max. operating pressure 10 bar (special
version: 16 bar)
Technical data
• Permissible temperature range -20 °C to
+140 °C
• Mains connection:
3~400 V, 50 Hz;
3~380 V, 60 Hz
• Protection class IP 55
• Nominal diameter DN 40 to DN 80
• Max. operating pressure 16 bar
Technical data
• Perm. temperature range -20 °C to
+120 °C
• Mains connection 3~400 V, 50 Hz
• Protection class IP 55
• Nominal diameter Rp 1 to DN 100
• Max. operating pressure 10 bar
(special version: 16 bar)
Technical data
• Perm. temperature range -20 °C
to+140 °C
• Mains connection 3~400 V, 50 Hz
• Protection class IP 55
• Nominal diameter DN 32 to DN 250
• Max. operating pressure 16 bar
(25 bar on request)
Equipment/function
Single-stage, low-pressure centrifugal
pump in in-line design with
• Mechanical seal
• Flange connection
• Motor with integrated electronic speed
control
• DP-E with switchover valve
Equipment/function
Single-stage, low-pressure centrifugal
pump in in-line design with
• Mechanical seal
• Flange connection
• Lantern
• Coupling
• Engine with integrated electronic power
adjustment
• DL-E with switchover valve
Equipment/function
Single-stage, low-pressure centrifugal
pump in in-line design with
• Mechanical seal
• For flange connection with pressure
measuring connection R ½
• Motor with one-piece shaft
• DPL with switchover valve
Equipment/function
Single-stage, low-pressure centrifugal
pump in in-line design with
• Mechanical seal
• Flange connection with pressure
measuring connection R ½
• Lantern
• Coupling
• IEC standard motor
• DL with switchover valve
Materials:
• Pump housing and lantern: EN-GJL-250
• Impeller: PPO-GF30
• Shaft: 1.4021
• Mechanical seal: AQEGG
Other mechanical seals: on request
Materials:
• Pump housing and lantern: EN-GJL-250
• Impeller:
Standard version: EN-GJL-200
special version: G-CuSn 10
• Shaft: 1.4122
• Mechanical seal: AQEGG
Other mechanical seals: on request
Materials:
• Pump housing and lantern: EN-GJL-250
• Impeller: PPO fibreglass-reinforced
EN-GJL-200 (depending on pump type)
• Shaft: 1.4021
• Mechanical seal: AQEGG; other
mechanical seals on request
Materials:
• Pump housing and lantern:
Standard version: EN-GJL-250
Optional: Spheroidal cast iron
EN-GJS-400-18-LT
• Impeller:
Standard: EN-GJL200
Special version: Red brass G-CuSn 10
• Shaft: 1.4122
• Mechanical seal: AQEGG
Other mechanical seals: on request
Special features
• Motors with higher efficiency as standard;
from 0.75 kW nominal motor power
motors with IE2 technology
• Energy savings due to integrated
electronic power control
• Simple operation with red-button
technology and display
• Various control modes Δp-c, Δp-v, PID
and n-const. (control mode)
• Analogue interfaces 0-10 V, 2-10 V, 0-20
mA, 4-20 mA
• Optional interfaces for bus
communication using plug-in IF-Modules
• Integrated dual pump management
• Integrated full motor protection (PTC
thermistor sensor) with trip electronics
Special features
• Motors with IE2 technology for higher
efficiency fitted as standard
• Energy savings due to integrated
electronic power control
• Simple operation with red-button
technology and display
• Various control modes Δp-c, Δp-v, PID
and n-const. (control mode)
• Analogue interfaces 0-10 V, 2-10 V, 0-20
mA, 4-20 mA
• Optional interfaces for bus
communication using plug-in IF-Modules
• Integrated dual pump management
• Integrated full motor protection (PTC
thermistor sensor) with trip electronics
Special features
• Motors with higher efficiency as standard;
from 0.75 kW nominal motor power
motors with IE2 technology
• Standard condensate drainage holes in
the motor housings and lanterns
• Series version: Motor with
one-piece shaft
• Version N: Standard motor B5 or V1 with
stainless steel plug shaft
• Bidirectional mechanical seal with
forced flushing
• Easy to install due to feet with threaded
holes on pump housing
Special features
• Motors with higher efficiency as standard;
from 0.75 kW nominal motor power
motors with IE2 technology
• Reduced life cycle costs due to optimised
efficiency
• Standard condensate drainage holes in
the motor housings
• Can be used flexibly in air-conditioning
and cooling systems, with application
benefits due direct draining of
condensate via optimised lantern design
(patented)
• Bidirectional mechanical seal with forced
flushing
• High worldwide availability of standard
motors (according to Wilo specifications)
and standard mechanical seals
• Easy to install due to feet with threaded
holes on pump housing
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Worldwide.
High-efficiency solutions from Wilo.
3
WILO SE, with headquarters in Dortmund, is one
of the world’s leading manufacturers of pumps
and pump systems for heating, air conditioning
and cooling technology, as well as for water
supplies and sewage treatment and disposal.
Founded in 1872 as Kupfer- und
Messingwarenfabrik Louis Opländer, the company
has almost 70 branches worldwide and over
6,200 employees.
Turnover amounted to 1,021.4 million EUR in
2010. International recognition has increased
rapidly since the company became a European
limited liability company (SE) in 2008.
Wilo pumps and systems set global standards
for efficiency and technical performance: with
high-efficiency solutions for all applications in
the segments.
Product category
Building Services.
Pumps and pump systems for heating, air conditioning, cooling,
pressure boosting, water supply and sewage disposal in domestic
households, rented accommodation, administrative and
commercial buildings.
Standard glanded pumps
Series
Wilo-CronoNorm-NLG
Design
Baseplate pump with axial suction
Product category
Standard glanded pumps
Series
Wilo-CronoNorm-NL
Wilo-VeroNorm-NPG
Design
Single-stage low-pressure centrifugal
pump with axial suction, in accordance
with EN 733 and ISO 5199, mounted on
baseplate.
Application
• Pumping of clean or slightly soiled water
(max. 20 ppm) without solid matter for
water circulation, transfer and pressure
boosting
• For pumping cold and hot water
(according to VDI 2035) without abrasive
matter in
• heating, cold water and cooling water
installations
• Applications in municipal water supply,
irrigation, building services, general
industry, power stations, etc.
Application
• Pumping clean or slightly contaminated
water (max. 20 ppm) without solid matter
for circulation, transfer and pressure
boosting purposes.
• For pumping heating water in accordance
with VDI 2035, water/glycol mixtures,
cooling/cold water and process water.
• For applications in municipal water supply,
irrigation, building services, industry,
power stations etc.
Q max.
1,650 m³/h
Q max.
3,000 m³/h
H max.
103 m
H max.
140 m
Technical data
• Permitted temperature range -20 °C to
+120 °C
• Mains connection 3~400 V, 50 Hz
• Protection class IP 55
• Nominal diameters DN 150 to DN 300
• Max. operating pressure 16 bar
Technical data
• Perm. temperature range -20 °C to
+140 °C
• Mains connection 3~400 V, 50 Hz
• Protection class IP 55
• Nominal diameter on suction side DN 50
to DN 500
• Nominal diameter on pressure side DN 32
to DN 500
• Maximum operating pressure: depending
on type and application up to 16 bar
Equipment/function
• Single-stage horizontal spiral housing
pump with bearing bracket and
replaceable stationary wear rings in
process construction
• Shaft sealing by means of mechanical
seals according to EN 12756 or stuffing
box packing
• Spiral housing with directly cast pump
feet. Bearing of the pump shaft by means
of grease-lubricated grooved ball
bearings
• Shaft coupling with intermediate sleeve
Equipment/function
Single-stage low-pressure centrifugal
pump in monobloc design with coupling,
coupling protection, motor and baseplate
• Mechanical seal or stuffing box
• Wilo factory motor or ATB motor
Materials:
• Pump housing: EN-GJL-250
• Impeller: EN-GJL-250
• Shaft: 1.4028
Product category
Packaged pressurisation units
Series
Wilo-Comfort Series P135, P235, P160,
P260, P180, P280
Product Information
5 ¼ turn mini ball valves
Product category
Control devices
Series
Wilo-CC-HVAC system
Wilo-CCe-HVAC system
Wilo-VR-HVAC system
Design
-
Pipework
½” in brass and braided flexible hoses
¼” in brass and nylon tubing
Electrical supply
Input supply 230v/1ph/50Hz
Application
Switchgears for controlling 1 to 6 pumps
Volt free contact Max 5A at 230Vac
Switching Volt free contact Max 10A at
230Vac
Comfort Controller
The comfort controller works on a closed
loop pressure control via an analogue
pressure transducer and an electronic micro
processor ensuring accurate measurement
and feed back of system condition. The
control philosophy allows the duty pump
to run, ensuring the cold fill pressure is
met. 2 pump models will rotate the duty
automatically between both pumps
ensuring even wear; if the duty pump fails
the standby pump will start automatically.
Q max.
H max.
-
To ensure efficient operation of the sealed
system the comfort controller also monitors
the number of pump starts and changes in
pressure providing excess starts or system
leak alarms if operating out of the standard
parameters
Features
Main control PCB
Display PCB
Pressure Transducer
Flexible hose c/w wingnuts
½” non-return valve
1.2” inlet ball float valve
4” float to suit above
Float switch
Technical data
-
Equipment/function
Wilo-CC-HVAC System:
• Comfort control system for 1 to 6 pumps
switched in parallel, with fixed speed
Wilo-CCe-HVAC system:
• Comfort control system for a fully
automatic control of 1 to 6 pumps with
integrated electronics/speed control
or activation of external frequency
converters
Wilo-VR-HVAC System:
• Vario controller for 1 to 4 pumps
switched in parallel, with integrated
speed control
Materials:
• Pump housing and pressure cover: ENGJS-500-7
• Bearing bracket: EN-GJL-250
• Impeller: EN-GJL-250 (special version:
G-CuSn10)
• Shaft: 1.4028
• Stationary wear rings: G-CuSn10
• Mechanical seal: AQ1EGG (other
mechanical seals on request)
Special features
• Motors in IE2 technology with higher
efficiency as standard
• Reduced life cycle costs due to optimised
efficiency
• Bidirectional mechanical seal with forced
flushing
• Replaceable stationary wear rings
• Low NPSH-values, best cavitation
properties
• High availability of IEC standard motors
Worldwide
Special features
• Motors with higher efficiency as standard;
from 0.75 kW nominal motor power
motors with IE2 technology
• Other materials and versions on request
Special features
• Special versions on request
Information
Online catalogue www.wilo.com
Information
Online catalogue www.wilo.com
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
17
Product category
Series
Wilo-Hydroplus-E (EBMS 2G)
Pumps
Horizontal and Vertical multi stage design
of stainless steel construction,
WRC approved.
Motor
Totally enclosed fan cooled (TEFC), IP54,
class F, 400 volts, three phase, direct on line
(DOL) starting via pump mounted inverter
Inverter
Each pump has an inbuilt inverter, giving
maximum reliability and flexibility. Each
inverter has a LCD providing status of pump
(on/off/faults), each inverter is equipped
with dry running protection.
Pipe Work
Stainless steel 14571, sized in accordance
with the overall hydraulic performance of
the unit.
Valves
DVGW certificated nickel-plated isolation
and non-return valves.
Pressure Sensor
Heavy duty piezoresistive
type transducers (4-20ma).
Accumulator
1 x 8 litre MWP 16 bar, WRc
approved c/w through flow shutoff valve
for testing and draining.
Control Panel
ABS enclosure, IP54 protection class with
isolator and fused protection per pump.
The EBMS control board is fitted inside
inverter no.1. The control board allows
fully automatic control upto a maximum
of 3 pumps in parallel. The set point can
be easily adjusted via a potentiometer
mounted on the control board.
Design
Max working Pressure:
MHIE: 10 Bar
MVIE: 16 Bar
Voltage: 400V/3PH/50HZ
Protection Index: IP54
EMC Compliance: EN61000-6-2/3
Product category
Series
Wilo-Comfort-Vario COR- MHI/VR
Pumps
Horizontal multi stage design of stainless
steel construction, WRC approved.
Motor
Totally enclosed fan cooled (TEFC), IP54,
class F, 230 volts, three phase, direct on line
(DOL) starting via panel mounted inverter.
Inverter
Each pump has a dedicated panel mounted
inveter, giving maximum reliability and
flexibility. The inverters typically employed
are panel mounted 6 pulse PWM type
inverter.
Pipe Work
Stainless steel 14571, sized in accordance
with the overall hydraulic performance of
the unit.
Valves
DVGW certificated nickel-plated isolation
and non-return valves.
Pressure Sensor
Heavy duty piezoresistive type transducers
(4-20ma).
Accumulator
1 x 8 litre MWP 16 bar, WRc approved c/w
through flow shutoff valve for testing and
draining.
Control Panel
VR-230V central control unit of fully
electronic modular design for automatic
control of a maximum of 3parallel pumps,
which contain integrated frequency
converters for the speed control. Sheet
steel enclosure, IP54 protection class, with
door interlocked isolator, LC display, access
to operation control parameters via a single
dial/ pushbutton.
Design
Max working 10 Bar
Voltage: 230V/1PH/50Hz
Protection Index: IP54
EMC Compliance: EN61000-6-2/3
3URGXFWFDWHJRU\
0XOWLSXPSSUHVVXUHERRVWLQJV\VWHPV
ZLWKVSHHGFRQWUROOHGSXPSV
6HULHV
:LOR&RPIRUW9DULR&250+,(Ë95
:LOR&RPIRUW19DULR&2509,6(Ë95
:LOR&RPIRUW9DULR&2509,(Ë95
:LOR&RPIRUW9DULR&25+HOL[9(Ë
'HVLJQ
3UHVVXUHERRVWLQJV\VWHPZLWKWR
QRQVHOISULPLQJVWDLQOHVVVWHHOKLJK
SUHVVXUHPXOWLVWDJHFHQWULIXJDOSXPSV
VZLWFKHGLQSDUDOOHOZLWKLQWHJUDWHG
VSHHGFRQWURO
$SSOLFDWLRQ
)RUIXOO\DXWRPDWLFZDWHUVXSSO\
DQGSUHVVXUHERRVWLQJLQUHVLGHQWLDO
FRPPHUFLDODQGSXEOLFEXLOGLQJVKRWHOV
KRVSLWDOVGHSDUWPHQWVWRUHVDQGIRU
LQGXVWULDOV\VWHPV
Ê )RUSXPSLQJSRWDEOHZDWHUDQGSURFHVV
ZDWHUFRROLQJZDWHUZDWHUIRUILUH
ILJKWLQJRURWKHUVHUYLFHZDWHU
4PD[
bPåK
+PD[
bP
7HFKQLFDOGDWD
Ê 0DLQVFRQQHFWLRQab9b+]
GHSHQGLQJRQW\SHDOVRab9
b+]
Ê )OXLGWHPSHUDWXUHPD[bo&
Ê 2SHUDWLQJSUHVVXUHbEDU
Ê ,QOHWSUHVVXUHbEDU
Ê 3URWHFWLRQFODVV,3b
(TXLSPHQWIXQFWLRQ
Ê WRSXPSVSHUV\VWHP
Ê &RQWLQXRXVFRQWURORSHUDWLRQGXH
WRSXPSVZLWKLQWHJUDWHGIUHTXHQF\
FRQYHUWHUV
Ê &RPSRQHQWVWKDWFRPHLQFRQWDFWZLWK
IOXLGDUHFRUURVLRQUHVLVWDQW
Ê *DOYDQLVHGEDVHIUDPHZLWKKHLJKW
DGMXVWDEOHYLEUDWLRQGDPSHUVIRU
LQVXODWLRQDJDLQVWVWUXFWXUHERUQHQRLVH
Ê 3LSHZRUNLQVWDLQOHVVVWHHO
Ê *HDURSHUDWHGVKXWRIIEDOOFRFN
DQQXODUVKXWRIIYDOYHRQHYHU\SXPS
RQVXFWLRQDQGSUHVVXUHVLGHV
Ê 1RQUHWXUQYDOYHRQSUHVVXUHVLGH
Ê 'LDSKUDJPSUHVVXUHYHVVHObO31
RQSUHVVXUHVLGH
Ê 3UHVVXUHVHQVRURQGLVFKDUJHVLGH
6SHFLDOIHDWXUHV
Ê &RPSDFWV\VWHPZLWKH[FHOOHQWYDOXHIRU
PRQH\GXHKLJKSUHVVXUHPXOWLVWDJH
FHQWULIXJDOSXPSVZLWKLQWHJUDWHG
IUHTXHQF\FRQYHUWHUV
Ê 6XSHUSURSRUWLRQDOO\ODUJHFRQWUROUDQJH
Ê ,QWHJUDWHGIXOOPRWRUSURWHFWLRQYLD37&
Ê ,QWHJUDWHGGU\UXQQLQJGHWHFWLRQZLWK
DXWRPDWLFFXWRXWLQHYHQWRIORZZDWHU
YLDSHUIRUPDQFHFKDUDFWHULVWLFVRIWKH
PRWRUFRQWUROHOHFWURQLFV
Ê 6HULHVZLWK+HOL[9ZLWK,(PRWRUV
)RUV\VWHPVZLWK09,6(SXPSV
Ê 9LUWXDOO\QRLVHOHVVV\VWHPGXHWRD
JODQGOHVVKLJKSUHVVXUHPXOWLVWDJH
FHQWULIXJDOSXPS
Ê 8SWRG%$TXLHWHUWKDQ
FRQYHQWLRQDOV\VWHPVZLWKFRPSDUDEOH
K\GUDXOLFRXWSXW
,QIRUPDWLRQ
2QOLQHFDWDORJXHZZZZLORFRP
%XLOGLQJ6HUYLFHVFDWDORJXH:DWHU6XSSO\
Product category
Series
CAT5 Booster Set
Heating, air-conditioning, cooling.
Pressure boosting.
Sewage disposal.
Wilo-Stratos high-efficiency pump
for heating, air-conditioning and
cooling worldwide.
Wilo pressure boosting systems
with Helix high-pressure
multistage centrifugal pumps.
Constant pressure at every level.
Wilo-DrainLift M, L.
Full-value and connection-ready
faeces lifting unit for detached and
semi-detached houses.
• Non domestic hose union taps
• Bin washdown
• Garden irrigation
• Laboratories
• Mortuary and embalming equipment
• Butchery and slaughter-house equipment
Description
The sets are provided with a single fixed
speed pump, MHI or a variable speed pump,
MHIE.
The MHI sets are controlled via pressure
switch, DOL motor starter and run on timer.
The MHIE sets are controlled via pressure
transducer and motor mounted inverter.
All are complete with a non return valve,
pressure gauge, 8lt vessel and outlet
isolation valve and tank draincock.
The water level in the break tank is
controlled via ½” BS1212 equilibrium float
valve which provides a flow rate of 1.2 l/s at
a minimum inlet pressure of 1 bar.
Low level protection is provided via side
mounted float switch.
Operation
The booster set monitors the system
pressure and as demand increases the
pressure will fall and the pump will start and
continue to run, until demand has stopped
and pressure increases to the set point.
The fixed speed booster sets have a run on
timer that overrides the pressure switch
for a set period to minimise the number of
starts per hour.
Connections
Inlet: ½” BSP
Outlet: 1” BSP
BMS: Volt free connection for pump fault
5
Highest efficiency at the
lowest life cycle costs.
The economic supply to
buildings increasingly
demands the use of
innovative systems from
optimally configured
components. Whether
in a detached or
semidetached home,
industrial, commercial
or public buildings,
hospitals or hotels: Wilo
assures everyone with its
high-efficiency pumps
and systems for heating
systems, air conditioning,
water supply and
sewage disposal. Many
processes within Facility
Management can be
controlled and regulated
by building automation
systems conveniently.
Wilo high-efficiency
pumps and Wilo pump
systems with electronic
controls offer the
best technological
foundations anywhere
in the market. They are
at home in any system
and can be integrated
optimally into building
automation. They offer
exceptional possibilities
for saving on power
and upkeep costs. An
investment, that will
soon be offset and more
than pay for itself in the
long run.
Product category
Wilo Online Catalogue www.wilo.co.uk.
Building Services - Commercial.
Product category
Product category
Product category
Vertical, multistage centrifugal pumps
Series
Wilo-Multivert-MVIE
Single-pump pressure boosting systems
Series
Wilo-Economy CO-1 MVIS … /ER
Wilo-Economy CO-1 MVI … /ER
Wilo-Economy CO-1 Helix-V … /CE+
Single-pump pressure boosting systems
with speed-controlled pump
Series
Wilo-Comfort-N-Vario COR-1 MVISE …
Wilo-Comfort-Vario COR-1 MHIE …
Wilo-Comfort-Vario COR-1 MVIE …
Wilo-Comfort-Vario COR-1 Helix-VE …
Wilo-SiBoost Smart 1 Helix VE ...
Multi-pump pressure boosting systems
Series
Wilo-Economy CO 2-4 MHI … /ER
Wilo-Comfort-N-CO 2-6 MVIS … /CC
Wilo-Comfort-CO 2-6 MVI … /CC
Wilo-Comfort-CO 2-6 Helix-V … /CC
Design
Non-self-priming multistage pump with
integrated frequency converter
Design
Water-supply units with a non-selfpriming,
high-pressure multistage centrifugal pump
Design
Water-supply units with a non-selfpriming,
high-pressure multistage centrifugal pump
with integrated speed control
Design
Pressure boosting system with 2 to 6 nonself-priming, stainless steel, highpressure,
multistage centrifugal pumps switched
in parallel
Application
• Water supply and pressure boosting
• Industrial circulation systems
• Process engineering
• Cooling water circulation systems
• Washing and sprinkling systems
Application
For fully automatic water supply in inlet
mode from the public water supply network
or from a break tank
• For pumping potable water, process
water, cooling water, water for
firefighting or other service water
Application
For fully automatic water supply in inlet
mode from the public water supply network
or from a break tank
• For pumping potable water, process
water, cooling water, water for
firefighting or other service water
Application
For fully automatic water supply and
pressure boosting in residential,
commercial and public buildings, hotels,
hospitals, department stores and for
industrial systems
• For pumping potable water and
process water, cooling water, water for
firefighting or other service water
Q max.
145 m³/h
Q max.
135 m³/h
Q max.
97 m³/h
Q max.
800 m³/h
H max.
245 m
H max.
160 m
H max.
150 m
H max.
160 m
Technical data
• Fluid temperature -15 to +120 °C
• Operating pressure max. 16 bar/25 bar
• Inlet pressure max. 10 bar
• Protection class IP 54 or IP 55
Technical data
• Mains connection 3~230 V / 400 V, 50 Hz
(other versions on request)
• Fluid temperature max. 50 °C
• Operating pressure 10/16 bar
• Inlet pressure 6/10 bar
• Switching pressure stages 6 / 10 / 16 bar
• Protection class IP 41
Technical data
• Mains connection 3~400 V, 50 Hz
• Fluid temperature max. 50 °C
• Operating pressure 10/16 bar
• Inlet pressure 6/10 bar
• Protection class IP 44
Technical data
• Mains connection 3~230 V / 400 V, 50 Hz
• Fluid temperature max. 50 °C
• Operating pressure 10/16 bar
• Inlet pressure 6/10 bar
• Protection class IP 54
Equipment/function
• Stainless steel pump in in-line design
• PN 16 with oval flanges
• PN 16/25 with DIN round flanges,
Victaulic connections depending on pump
type
• Single-phase or three-phase current
standard motor
• Integrated frequency converter
• Integrated thermal motor protection
• Protection against low water level
Equipment/function
• 1 pump of the MVIS, MVI or Helix-V series
• Components that come in contact with
fluid are corrosion-resistant
• Base frame made of stainless steel 1.4301
with height-adjustable vibration dampers
for insulation against structure- borne
noise
• Pipework in stainless steel 1.4571
• Check valve, on pressure side
• Non-return valve, on pressure side
• Diaphragm pressure vessel 8 l, PN 16, on
pressure side
Equipment/function
• 1 pump of the MVIE, Helix-VE or MVISE
series with integrated frequency
converter
• All parts that come in contact with the
fluid are corrosion-resistant
• Pipework in stainless steel 1.4571
• Check valve, on pressure side
• Non-return valve, on pressure side
• Diaphragm pressure vessel 8 l, PN 16, on
pressure side
Equipment/function
• 2 to 4 or 2 to 6 pumps per system
• Components that come in contact with
fluid are corrosion-resistant
• Galvanised base frame with
heightadjustable vibration dampers for
insulation against structure-borne noise
• Pipework in stainless steel 1.4571
• Gear-operated shut-off ball cock/ annular
shut-off valve on every pump, on suction
and pressure sides
• Non-return valve, on pressure side
• Diaphragm pressure vessel 8 l, PN 16, on
pressure side
• Pressure sensor, on discharge side
Special features
• Easy commissioning
• Full motor protection
• Large control range
• MVIE 2..-16..-6
All parts that come in contact with the
fluid made of stainless steel 1.4301
(AISI 304) or 14404 (AISI 316L)
• MVIE 16..-95..
depending on pump type in stainless steel
1.4404 (AISI 316L) or 1.4301 (AISI 304)
with pump housing made of grey cast iron
EN-GJL-250, cataphoretic coating
• All relevant components have KTW and
WRAS approval
Special features
For systems with MVIS pump
• Virtually noiseless system due to a
glandless, high-pressure, multistage
centrifugal pump
• Up to 20 dB (A) quieter than conventional
systems with comparable hydraulic
output
• Operationally reliable due to the
combination with the ER-1 control device
For systems with Helix-V pump
• IE2 standard motors
• Efficiency-optimised, laser-welded
2D/3D hydraulics
• User-friendly mechanical seal with
cartridge, equipped with a standard seal
for easy maintenance
• Operationally reliable due to the
combination CE+ control device
Special features
• For systems with MVISE pump
• Virtually noiseless system due to the use
of glandless, stainless steel, highpressure,
multistage centrifugal pumps with
integrated frequency converter
• Up to 20 dB[A] quieter than conventional
systems with comparable hydraulic
output
For systems with Helix-VE pump
• IE2 standard motors
• Efficiency-optimised, laser-welded
2D/3D hydraulics
• User-friendly mechanical seal with
cartridge, equipped with a standard seal
for easy maintenance
Special features
• Compact system in accordance with the
requirements of DIN 1988
• 2 to 4 or 2 to 6 high-pressure, multistage
centrifugal pumps switched in parallel
• Easily adjustable and operationally reliable
due to integrated control devices
• Series with Helix-V with IE2 motors
For systems with MVIS pumps
• Virtually noiseless system due to a
glandless, high-pressure, multistage
centrifugal pump
• Up to 20 dB (A) quieter than conventional
systems with comparable hydraulic
output
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
15
Product category
Vertical, multistage centrifugal pumps
Series
Wilo-Helix-V
Product category
Vertical, multistage centrifugal pumps
Series
Wilo-Helix-VE
Product category
Vertical, multistage centrifugal pumps
Series
Wilo-Helix EXCEL
Product category
Vertical, multistage centrifugal pumps
Series
Wilo-Multivert MVI
Design
Non-self-priming multistage pump
Design
Non-self-priming multistage pump with
integrated frequency converter
Design
Non-self-priming multistage pump with EC
motor with integrated high-efficiency drive
Design
Non-self-priming multistage pump
Application
• Water supply and pressure boosting
• Industrial circulation systems
• Process water
• Cooling water circulation systems
• Fire extinguishing systems
• Washing systems
• Irrigation
Application
• Water supply and pressure boosting
• Industrial circulation systems
• Process water
• Cooling water circulation systems
• Washing systems
• Irrigation
Application
• Water supply and pressure boosting
• Industrial circulation systems
• Process water
• Cooling water circulation systems
• Fire extinguishing systems
• Washing systems
• Irrigation
Application
• Water supply and pressure boosting
• Fire extinguishing systems
• Boiler feed
• Industrial circulation systems
• Process engineering
• Cooling water circulation systems
• Washing and sprinkling systems
Q max.
80 m³/h
Q max.
80 m³/h
Q max.
58 m³/h
Q max.
155 m³/h
H max.
250 m
H max.
240 m
H max.
243 m
H max.
240 m
Technical data
• Fluid temperature -30 to +120 °C
• Operating pressure max. 16/25 bar
• Inlet pressure max. 10 bar
• Protection class IP 55
• PN 16 and PN 25 with loose round flanges
Technical data
• Fluid temperature -20 to +120 °C
• Operating pressure max. 16/25 bar
• Inlet pressure max. 10 bar
• Protection class IP 55
• PN 16 and PN 25 with loose round flanges
Technical data
• Fluid temperature: -20 to +120 °C with
EPDM (-10 to +90 °C with FKM gasket)
• Operating pressure max.: 16/25 bar
• Protection class: IP 55
• Helix EXCEL 2-16:
PN 16 with oval flanges and PN 25 with
round flanges in accordance with
ISO 2531 and ISO 7005
• Helix EXCEL 22-36:
PN 25 with round flanges in accordance
with ISO 2531 and ISO 7005
Technical data
• Fluid temperature -15 to +120 °C
• Operating pressure max. 16/25 bar
• Inlet pressure max. 10 bar
• Protection class IP 55
Equipment/function
• Impellers, stage chambers and pump
housing stainless steel 1.4301/1.4404
(AISI304L/AISI316L)
• Versions with 1.44xx stainless steel
designed for aggressive fluids
• Versions
--PN 16 with oval flanges and PN 25 with
round DIN flanges
--Helix V22, 32, 52 PN 16 and PN 25 with
round loose flanges in accordance with
ISO 2531 and ISO 7005
• IE2/IEC standard three-phase AC motor
Equipment/function
• Impellers, stage chambers and pump
housing stainless steel 1.4301/1.4404
(AISI304L/AISI316L)
• Versions with 1.44xx stainless steel
designed for aggressive fluids
• PN 16 and PN 25 versions with round
loose flanges in accordance with ISO 2531
and ISO 7005
• IE2/IEC standard three-phase AC motor
• Integrated frequency converter
Equipment/function
• Impellers, diffusors and stage housings
made of stainless steel
• Versions in 1.44xx stainless steel for
aggressive fluids
• High-efficiency EC motor (degrees of
efficiency higher than the IE4 limit values
acc. to IEC TS 60034-31 Ed.1)
• Optional interfaces for BUS
communication via plug-in IF-modules
Equipment/function
• Stainless steel pump in in-line design
• Versions
--MVI 1.. up to 16..-6 PN 16 with oval
flanges and PN 25 with round DIN
flanges
--MVI 16.. to 95.. PN 16/PN 25 with round
DIN flanges
--Victaulic connections (PN 25)
depending on pump type
• IE2/IEC standard three phase motor,
2-pole, AC or DC version. Single-phase
AC motor with integrated thermal motor
protection
Special features
• Efficiency-optimised, laser-welded
2D/3D high-efficiency hydraulics
• Easy pump replacement without pipe
modification. Due to the modular pump
housing, Helix pumps can be installed in
existing pipes.
• User-friendly mechanical seal with
cartridge, equipped with a standard seal
for easy maintenance
• Potable water approval according to
ACS/KTW/WRAS for all parts that come in
contact with the fluid
Special features
• Efficiency-optimised, laser-welded
2D/3D high-efficiency hydraulics
• Easy pump replacement without pipe
modification. Due to the modular pump
housing, Helix pumps can be installed in
existing pipes.
• User-friendly mechanical seal with
cartridge, equipped with a standard seal
for easy maintenance
• Potable water approval according to ACS/
KTW/WRAS for all parts that come in
contact with the fluid
Special features
• Efficiency-optimised, laser-welded
2D/3D high-efficiency hydraulics
• Built-in electronic control thanks to the
High Efficiency Drive with large control
range
• Choice of various different control modes
(speed control, constant pressure, and
PID).
• User-friendly mechanical seal with
cartridge, equipped with a standard seal
for easy maintenance
• The spacer coupling enables the
mechanical seal to be replaced without
dismantling the motor (from 7.5 kW and
higher)
• Intermediate bearings (Al203/CW) ensure
a long service life
• WRAS/KTW/ACS approval for all parts
that come in contact with the fluid (EPDM
version)
Special features
• MVI 1..-16..-6
All parts that come in contact with the
fluid made of stainless steel 1.4301
(AISI 304) or 14404 (AISI 316L)
• MVI 32..-95..
depending on pump type in stainless steel
1.4404 (AISI 316L) or 1.4301 (AISI 304)
with pump housing made of grey cast iron
EN-GJL-250, cataphoretic coating
• All relevant components have KTW and
WRAS approval
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Information
Online catalogue www.wilo.com
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Range Guide.
Building Services.
7
Heating, air-conditioning,
cooling.
Pumps, pump systems and accessories for
heating, air-conditioning and secondary hot
water.
> High-efficiency, energy-saving and
standard pumps in glandless and glanded
pump versions
> Pump regulators and controls, modules
for building automation and switchgears
> Lifting units for condensates
Water supply.
Pumps, pump systems and accessories for
> Rainwater utilisation
> Domestic water supply
> Commercial water supply and pressure
boosting
> Raw water intake
Drainage and sewage.
Pumps, pump systems and accessories for
> Wastewater collection and transport
> Drainage
> Pressure drainage
Product category
Glandless Premium high-efficiency
pumps
Series
Wilo-Stratos PICO
Product category
Glandless Standard high-efficiency
pumps
Series
Wilo-Yonos PICO
Product category
Glandless Premium high-efficiency
pumps
Series
Wilo-Stratos
Wilo-Stratos-D
Product category
Glanded high-efficiency pumps in
in-line design
Series
Wilo-Stratos GIGA
Design
Glandless circulation pump with threaded
connection, EC motor and automatic power
adjustment.
Design
Glandless circulation pump with threaded
connection, EC motor and automatic power
adjustment.
Design
Glandless circulation pump with threaded
connection or flange connection, EC motor
and automatic power adjustment.
Design
High-efficiency inline pump with EC motor
and electronic duty adaptation in glanded
construction. Version as singlestage
low-pressure centrifugal pump with flange
connection and mechanical shaft seal.
Application
All hot water heating systems,
airconditioning applications, industrial
circulation systems.
Application
All hot water heating systems,
airconditioning applications, industrial
circulation systems.
Application
Hot-water heating systems of all kinds,
air-conditioning systems, closed cooling
circuits, industrial circulation systems
Application
Pumping of heating water (acc. to VDI
2035), cold water and water/glycol mixtures
without abrasive substances in heating,
cold water and cooling systems.
Q max.
4 m³/h
Q max.
3.5 m³/h
Q max.
61 m³/h
Q max.
44 m³/h
H max.
6.0 m
H max.
6.0 m
H max.
13 m
H max.
52 m
Technical data
• Fluid temperature +2 °C to +110 °C
• Mains connection 1~230 V, 50 Hz
• Protection class IP X4D
• Threaded connection Rp ½, Rp 1 and Rp
1¼
• Max. operating pressure 10 bar
Technical data
• Fluid temperature +10 °C to +110 °C
• Mains connection 1~230 V, 50 Hz
• Protection class IP X2D
• Threaded connection Rp ½, Rp 1
and Rp 1¼
• Max. operating pressure 6 bar
Technical data
• Perm. temperature range -10 °C to
+110 °C
• Mains connection 1~230 V, 50 Hz
• Protection class IP X4D
• Nominal diameter Rp 1 to DN 100
• Max. operating pressure
screw-end pumps 10 bar
• Flange-end pumps 6/10 bar / 6 bar
(special version: 10 bar or 16 bar
Technical data
• Permitted temperature range of the fluid
-20 °C to +140 °C
• Mains connection:
3~440 V (±10 %), 50 Hz/60 Hz
3~400 V (±10 %), 50 Hz/60 Hz
3~380 V (-5 %/+10 %), 50 Hz/60 Hz
• Protection class IP 55
• Max. operating pressure 16 bar to +120
°C, 13 bar to +140 °C
Equipment/function
• Control mode: Δp-c and Δp-v, Dynamic
Adapt control function combinied with
Δp-v
• Automatic setback operation
• Automatic venting routine
• Automatic deblocking function
• Red-button technology for simple
operation
• Display indication of current power
consumption in W and accumulated
electricity consumption in kWh
• Reset function for resetting the
electricity meter
• Reset function for resetting to the factory
settings
• Blocking current-proof motor
• Particle filter
• Quick electrical connection with WiloConnector
• Options:
-Design with bronze pump housing for
use in underfloor heating systems,
-Versions with short port-to-port length
130 mm
Equipment/function
• Control mode: Δp-c and Δp-v
• Setting the pump output (delivery head)
• Automatic venting function
• Automatic deblocking function
• Red-button for simple operation
• LED display to adjust the setpoint and to
show the current consumption in watts
• Blocking current-proof motor
• Particle filter
• Quick electrical connection with WiloConnector
• Options:
-Versions with short port-to-port
length 130 mm
Equipment/function
• EC motor
• Pre-selectable control modes Δp-c,
Δp-v, Δp-T
• Automatic setback operation for
additional savings potential
• Dual pump management
• Red-button technology for simple
operation
• Graphical pump display with rotating
display
• Remote control via infrared interface
(IR-Module/IR-Monitor)
• Integrated motor protection
• System expansion by means of
retrofittable interface modules for
communication: Modbus, BACnet, CAN,
LON, PLR etc.
• Pump housing with cataphoretic coating
• Combination flanges PN 6/PN 10
(for DN 32 to DN 65)
• Thermal insulation shells as standard for
heating applications
Equipment/function
Single-stage, low-pressure centrifugal
pump in in-line design with
• Mechanical seal
• Flange connection
• Lantern
• Coupling
• EC motor with electronic power
adjustment
Special features
• Energy efficiency index (EEI) <0.20
• High-efficiency pump especially for single
and two-family houses, as well as for two
to six-family houses.
• Up to 90 % electricity savings compared
to old uncontrolled heating pumps
• Only 3 watts min. power consumption
• Very high starting torque for reliable
starting
• Integrated motor protection
• Venting routine for automatic venting
of the rotor chamber
Special features
• Energy efficiencyindex (EEI) <0.20
• High-efficiency pump especially for single
and two-family houses, as well as for two
to six-family houses.
• Only 4 watts min. power consumption
• Very high starting torque for reliable
starting
• Integrated motor protection
• Venting function to vent the rotor
chamber
• Flexible installation due to compact
design
Special features
• Energy efficiencyindex (EEI) <0.23
• Up to 80 % electricity savings over
circulation pumps without speed control
• Highest degrees of efficiency due to
ECM technology
Special features
• Innovative high-efficiency pump for
the highest overall degrees of efficiency
based on a new Wilo glanded design
• High-efficiency EC motor (degrees of
efficiency above IE4 limit values acc. to
IEC TS 60034-31 Ed.1)
• New hydraulics optimally adapted to
the EC motor technology
• Integrated electronic power adjustment
• Extremely compact and space-saving
design
• Simple operation by tried-and-tested
red-button technology and display
• Various control modes Δp-c, Δp-v, PID
and n-const. (control mode)
• Control range up to three times greater
than in conventional electronically
controlled pumps
• Analogue interfaces 0-10 V, 2-10 V, 0-20
mA, 4-20 mA
• Optional interfaces for bus
communication using plug-in IF-Modules
• Integrated dual-pump management with
efficiency-optimised peak-load cut-in
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Product category
Horizontal, multistage centrifugal
pumps
Series
Wilo-Economy MHI
Product category
Horizontal, multistage centrifugal
pumps
Series
Wilo-Economy MHIE
Product category
Vertical, multistage centrifugal pumps
Series
Wilo-Multivert MVISE
Design
Non-self-priming multistage pump
Design
Non-self-priming multistage pump with
integrated frequency converter
Design
Non-self-priming multistage pump with
glandless pump motor
Design
Non-self-priming multistage pump with
glandless pump motor and integrated
frequency converter
Application
• Water supply and pressure boosting
• Commerce and industry
• Cooling water circulation systems
• Washing and sprinkling systems
Application
• Water supply and pressure boosting
• Industrial circulation systems
• Process engineering
• Cooling water circulation systems
• Washing and sprinkling systems
Application
• Water supply and pressure boosting
Application
• Water supply and pressure boosting
Q max.
25 m³/h
Q max.
30 m³/h
Q max.
14 m³/h
ax.
14 m³/h
H max.
70 m
H max.
84 m
H max.
110 m
H max.
110 m
Technical data
• Fluid temperature -15 to +110 °C
• Operating pressure max. 10 bar
• Inlet pressure max. 6 bar
• Protection class IP 54
Technical data
• Fluid temperature -15 to +110 °C
• Operating pressure max. 10 bar
• Inlet pressure max. 6 bar
• Protection class IP 54
Technical data
• Fluid temperature -15 to +50 °C
• Operating pressure 16 bar
• Inlet pressure 6 bar
• Protection class IP 44
Technical data
• Fluid temperature -15 to +50 °C
• Operating pressure 16 bar
• Inlet pressure 6 bar
• Protection class IP 44
• Emitted interference in compliance with
EN 61000-6-1
• Interference resistance in compliance
with EN 61000-6-2
Equipment/function
• Stainless steel pump in monobloc design
• Threaded connection
• Single-phase or three-phase AC motor
• Single-phase AC motor with integrated
thermal motor protection
Equipment/function
• Stainless steel in monobloc design
• Threaded connection
• Integrated frequency converter
• Single-phase or three-phase AC motor
• Three-phase version with red-button
technology and LCD display for state
indication
• Integrated thermal motor protection
Equipment/function
• Stainless steel pump in in-line design
• Three-phase AC motor in glandless pump
design
Equipment/function
• Stainless steel pump in in-line design
• Glandless pump
• Self-venting
• Hydraulics in 1.4301
• Oval flange, round flange
• Three-phase AC motor with integrated
frequency converter, with red-button
technology and LCD display for state
indication
• Integrated thermal motor protection
• Protection against low water level
Special features
• All parts that come in contact with the
fluid are made of stainless steel 1.4301
(AISI 304) or 1.4404 (AISI 316)
• Compact design
• All relevant components have KTW and
WRAS approval
Special features
• Easy commissioning
• All parts that come in contact with the
fluid are made of stainless steel 1.4301
(AISI 304) or 14404 (AISI 316L)
• Compact design
• Integrated frequency converter
• Full motor protection
• All relevant components have KTW and
WRAS approval
Special features
• Low-noise (up to 20 dB(A) quieter than
conventional pumps)
• All parts that come in contact with the
fluid are corrosion-resistant
• Glandless pump technology
• All relevant components have KTW and
WRAS approval
Special features
• Easy commissioning
• Glandless pump technology
• Low-noise (up to 20 dB(A) quieter than
conventional pumps)
• Integrated frequency converter
• All components that come in contact
with the fluid are made of stainless steel
1.4301 (AISI 304)
• All relevant components have KTW and
WRAS approval
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Information
Online catalogue www.wilo.com
Information
Online catalogue www.wilo.com
13
Materials:
• Pump housing and lantern: EN-GJL-250
• Impeller: PPS-GF40
• Shaft: 1.4122
• Mechanical seal: AQ1EGG Other
mechanical seals: on request
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air- Conditioning, Cooling
We are continually adding to this series.
Product category
Vertical, multistage centrifugal pumps
Series
Wilo-Multivert MVIS
Product category
Self-priming multistage pumps and
pump systems
Series
Wilo-MultiCargo MC
Wilo-MultiCargo HMC
Wilo-MultiCargo FMC
Product category
1RQVelf-priming multistage pumps and
pump systems
Series
Wilo-MultiPress MP
Wilo-MultiPress HMP
Wilo-MultiPress FMP
Product category
Non-self-priming water supply unit
with frequency converter
Series
Wilo-EMHIL
Product category
Cistern pumps
Series
Wilo-Sub TWI 5/TWI 5-SE
Wilo-Sub TWI 5-SE P&P
Product category
Pump control
Series
Wilo-IR-Stick, IR-Module, IR-Monitor
Wilo-IF-Module Stratos/Wilo-IF-Module
Wilo-Protect-Module-C
Product category
Glandless high-efficiency pumps
Series
Wilo-Stratos-ECO-ST
Product category
Glandless high-efficiency pumps
Series
Wilo-Star-Z NOVA
Product category
Glandless high-efficiency pumps
Series
Wilo-Stratos-ECO-Z
Wilo-Stratos-ECO-Z … BMS
Design
Self-priming multistage centrifugal pumps
Design
Non-self-priming multistage centrifugal
pumps
Design
Non-self-priming water supply unit with
frequency converter
Design
Submersible pumps
Design
-
Design
Glandless circulation pump with threaded
connection, EC motor and automatic power
adjustment
Design
Glandless circulation pump with threaded
connection and blocking-current proof
synchronous motor
Design
Glandless circulation pump with threaded
connection and automatic power
adjustment
Application
For domestic water supply, sprinkling,
irrigation, spraying and rainwater utilisation
Application
For domestic water supply, sprinkling,
irrigation, spraying and rainwater utilisation
Application
• Water supply and pressure boosting
• Rainwater utilisation
• Irrigation and spraying
Application
For domestic water supply from wells,
cisterns and tanks. For irrigation, sprinkling,
rainwater utilisation or for pumping out
water
Application
Wilo-Control products for connecting
pumps to the building automation
Application
Circulation in solar heating systems
Application
Secondary hot water circulation systems
and similar systems in industrial and
building services
Application
Secondary hot water circulation systems
and similar systems in industrial and
building services
Q max.
7 m³/h
Q max.
8 m³/h
Q max.
55 m³/h
Q max.
16 m³/h
H max.
57 m
H max.
57 m
H max.
8m
H max.
88 m
Technical data
• Mains connection 1~230 V, 50 Hz
3~400 V, 50 Hz
• nlet pressure max. 4 bar
• Fluid temperature max. +5 °C to +35 °C
• Ambient temperature max. +40 °C
• Operating pressure max. 8 bar
• Protection class IP 54
• Suction/pressure side connections:
--MC (Rp 1/Rp 1)
--FMC (R 1/Rp 1)
--HMC (Rp 1/Rp 1)
Technical data
• Mains connection 1~230 V, 50 Hz
3~400 V, 50 Hz
• Inlet pressure max. 6 bar
• Fluid temperature max. +5 °C to +35 °C
• Ambient temperature max. +40 °C
• Operating pressure max. 10 bar
• Protection class IP 54
• Suction/pressure side connections:
--MP 3.. Rp 1 (Rp 1); MP 6.. Rp 1¼/Rp 1
--FMP 3.. R 1/Rp 1; FMP 6.. R 1¼/Rp 1
--HMP 3.. Rp 1/Rp 1; HMP 6.. Rp 1¼/Rp 1
Technical data
• Maximum operating pressure: 10 bar
• Max. fluid temperature: 40 °C
• Min. fluid temperature: 0 °C
• Maximum ambient temperature: 50 °C
• Mains connection: 1~230 V, 50/60 Hz
Technical data
• Mains connection 1~230 V, 50 Hz
3~400 V, 50 Hz
• Fluid temperature max. +3 °C to +40 °C
• Operating pressure max. 10 bar
• Protection class IP 68
• Connection on pressure side Rp 1¼
• Connection on suction side for SE
version Rp 1¼
Q max.
-
Q max.
2.5 m³/h
Q max.
0.4 m³/h
Q max.
2.5 m³/h
H max.
-
H max.
5m
H max.
0.9 m
H max.
5m
Technical data
-
Equipment/function
• Directly flanged motor
• Thermal motor protection switch for
single-phase AC motor (1~230 V)
Equipment/function
• Directly flanged motor
• Thermal motor protection switch for
1~230 V version
Equipment/function
• including 1.4 m mains connection and
plug
• including EMC filter
• with built-in pressure and flow monitors
Technical data
• Perm. temperature range +15 °C to
+110 °C
• Mains connection 1~230 V, 50 Hz
• Protection class IP 44
• Nominal diameter Rp 1
• Max. operating pressure 10 bar
Technical data
• Fluid temperature: Potable water up
to 3.56 mmol/l (20 °d): max. +65 °C, in
short-term operation (2 h) up to +70 °C
• Mains connection 1~230 V, 50 Hz
• Protection class IP 42
• Threaded connection Rp ½
• Max. operating pressure 10 bar
Technical data
• Fluid temperature of secondary hot water
up to a water hardness of 3.2 mmol/l
(18 °d) max. +65 °C
• In short-term operation (2 h) up
to +70 °C
• Heating water: +15 °C to +110 °C
• Mains connection 1~230 V, 50 Hz
• Protection class IP 44
• Nominal diameter Rp 1
• Max. operating pressure 10 bar
Equipment/function
Wilo-IR-Stick, IR-Module, IR-Monitor
• Remote control with infrared interface for
electronically controlled Wilo pumps
Wilo-IF-Modules Stratos/IF-Modules
• Plug-in module for BA connection of
Stratos, Stratos GIGA, IP-E, DP-E, IL-E/
DL-E, MHIE, MVIE, Helix VE...
Wilo-Protect-Module-C
• Plug-in module for building automation
control of TOP-S/SD pumps without
speed control
Equipment/function
• EC motor
• Control modes Δp-v and Δp-c
• Automatic setback operation for
additional savings potential
• Red-button technology for simple
operation
• Blocking current-proof motor
• Cable lead-in on both sides for easy
installation
• Quick connection with spring clips
• Connection for building automation (BA)
• Pump housing with cataphoretic coating
for external corrosion protection
Equipment/function
• Quick electrical connection with WiloConnector
• Blocking current-proof motor
• Integrated ball shut-off valve on the
suction side (Star-Z NOVA A, Star-Z NOVA
C only)
• Integrated non-return valve on the
pressure side (Star-Z NOVA A, StarZ NOVA C only)
• Including digital plug-in time switch
(Star-Z NOVA C only)
• Including 1.8 m connecting cable with
shock-proof plug (Star-Z NOVA C only)
• Including thermal insulation
Equipment/function
• EC motor
Special features
-
Special features
• High efficiency motor technology
• Up to 80 % electricity savings over
circulation pumps without speed control
• Highest degrees of efficiency due to ECM
technology
• Min. electronic power consumption
only 5.8 W
• 3 times higher starting torque than
conventional circulation pumps
Special features
• Extremely low power consumption: 2 to
4.5 Watt due to new synchronous motor
• Materials of the highest quality: with
stainless steel impeller. This results in
a top hygiene standard, durability and
reliable protection against corrosion.
• Extended field of application for
calcareous water: up to 20° dH
• Flexible service motor: Fast replacement
of all common pump types
• Quick and convenient electrical
connection with no tools required thanks
to Wilo-Connector
Special features
• Corrosion-resistant pump housing made
of red brass for systems where oxygen
entry is possible
• 3 times higher starting torque than
conventional circulation pumps
• All plastic parts that come into
contact with the fluid fulfil KTW
recommendations
• Min. electronic power consumption only
5.8 W
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Special features
• Low-noise
• Ideal as a base-load pump for rainwater
utilisation
• HMC version with diaphragm pressure
vessel and pressure switch
• FMC version with fluid control for system
control
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Special features
• Low-noise
• Ideal as a base-load pump for rainwater
utilisation
• HMP version with diaphragm pressure
vessel and pressure switch
• FMP version with fluid control for system
control
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Equipment/function
• Connection cable, 20 m
• TWI 5 version with standard inlet basket
• Variants
--SE: with lateral inlet connecting piece
--FS: with built-in float switch
• Thermal motor protection for EM
version (1~230 V)
• Version TWI 5-SE Plug & Pump
additionally with
--pressure and flow controller
Wilo-Fluidcontrol
--On-/Off switch
--Floating suction fine filter incl. suction
hose
Special features
• Heavy-duty multistage pump with
stainless steel hydraulics
• Easy operation and adjustment
--Large display (32 characters) with plain
text display
--4 LEDs for clear status display
--Simplified menu navigation
--Plug & Play, the system is preassembled and fitted with connecting
cable
• Complies to EMC standards (EN 610006-2 and EN 61000-6-3) in the domestic
area thanks to installed filters
• APP function: periodic analysis of
the system behaviour and automatic
adjustment of the control parameters
(PID)
• AIS function: automatic short-period
running to prevent the hydraulics freezing
up at temperatures < 5 °C
• ART function: system automatically
attempts to restart after a fault
• Float switch can be connected optionallly
Special features
• Ready-to-plug in EM version (1~230 V)
• Pump (housing, stages, impellers) made
entirely of stainless steel 1.4301
(AISI 304)
• Self-cooling motor
• Installation possible outside water
• Thermal motor protection for EM version
(1~230 V)
Information
Online catalogue www.wilo.com
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
• Control mode Δp-v
(BMS versions Δp-v and Δp-c)
• Automatic setback operation for
additional savings potential
• Red-button technology for simple
operation
• Blocking current-proof motor
• Cable lead-in on both sides for easy
installation
• Quick connection with spring clips
• Thermal insulation shell
9
Product category
Glandless high-efficiency pumps
Series
Wilo-Stratos-Z
Wilo-Stratos-ZD
Product category
Glandless standard pumps
Series
Wilo-Star-Z
Wilo-Star-ZD
Product category
Glandless standard pumps
Series
Wilo-TOP-Z
Product category
Glanded special pumps
Series
Wilo-VeroLine IP-Z
Product category
Rainwater utilisation systems
Series
Wilo-RainSystem AF 150
Product category
Rainwater utilisation systems
Series
Wilo-RainSystem AF 400
Product category
Rainwater utilisation systems
Series
Wilo-RainCollector II RWN
Product category
Self-priming multistage pumps and
pump systems
Series
Wilo-Jet WJ
Wilo-Jet HWJ
Wilo-Jet FWJ
Design
Glandless circulation pump with threaded
connection and automatic power
adjustment
Design
Glandless circulation pump with threaded
connection
Design
Glandless circulation pump with threaded
connection
Design
Glanded circulation pump in in-line design
with threaded connection
Design
Automatic rainwater utilisation system with
2 self-priming pumps
Design
Automatic rainwater utilisation system
with run-down tank container and 2 non
self-priming pumps
Design
Ready-to-plug rainwater utilisation system
with rainwater tank
Design
Self-priming multistage centrifugal pumps
Application
Secondary hot water circulation systems
and similar systems in industrial and
building services
Application
Secondary hot water circulation systems
and similar systems in industrial and
building services
Application
Secondary hot water circulation systems
and similar systems in industrial and
building services
Application
For pumping potable water, cold and
hot water (in accordance with VDI 2035)
without abrasive substances, in heating,
cold water and cooling water systems
Application
Rainwater utilisation in multi-family houses
and small trade businesses for saving
potable water in conjunction with cisterns
or tanks
Application
Hybrid system for commercial and industrial
rainwater utilisation for saving potable
water in conjunction with cisterns or tanks
Application
Rainwater utilisation for saving potable
water
Application
For pumping water from wells for filling,
pumping empty, transferring by pumping,
irrigation and sprinkling. As emergency
pump for overflows
Q max.
41 m³/h
Q max.
5.5 m³/h
Q max.
65 m³/h
Q max.
5 m³/h
Q max.
12 m³/h
Q max.
16 m³/h
Q max.
4 m³/h
Q max.
5 m³/h
H max.
12 m
H max.
6.0 m
H max.
9m
H max.
4.5 m
H max.
58 m
H max.
56 m
H max.
52 m
H max.
50 m
Technical data
• Perm. temperature range of secondary
hot water up to water hardness of
3.56 mmol/l (20 °d) max. +80 °C
• Heating water -10 °C to +110 °C
• Mains connection 1~230 V, 50 Hz
• Protection class IP X4D
• Nominal diameter Rp 1 to DN 50
• Max. operating pressure screw-end
pumps 10 bar flange pumps 6/10 bar
Technical data
• Fluid temperature secondary hot water up
to water hardness 3.2 mmol/l (18 °d) max.
+65 °C
in short-term operation (2 h) up to +70 °C
• Heating water -10 °C up to +110 °C (not
Star-Z 15 TT)
• Mains connection 1~230 V, 50 Hz or for
Star-Z 25/2 DM 3~400 V, 50 Hz
• Protection class IP 44 (IP 42 for
Star-Z 15 TT)
• Nominal diameter Rp ½, Rp 1
• Max. operating pressure 10 bar
Technical data
• Perm. temperature range of secondary
hot water up to a water hardness of 3.56
mmol/l (20 °d) max. +80 °C
• Heating water -10 °C to +110 °C
• Mains connection:
--1~230 V, 50 Hz (depending on type)
--3~400 V, 50 Hz
--3~230 V, 50 Hz (with optional
switching plug)
• Protection class IP X4D
• Nominal diameter Rp 1 to DN 50
• Max. operating pressure screw-end
pumps 10 bar
• Flange pumps 6/10 bar
Technical data
• Perm. temperature range of secondary
hot water up to a water hardness of
4.99 mmol/l (28 °d) max. +65
• In short-term operation (2 h) up to +110 °C
• Heating water -8 °C to +110 °C
• Mains connection 1~230 V, 50 Hz,
3~400 V, 50 Hz
• Protection class IP 44
• Nominal diameter Rp 1
• Max. operating pressure 10 bar
Technical data
• Mains connection 1~230 V, 50 Hz
• Suction head max. 8 m
• Fluid temperature max. +5 °C to +35 °C
• Operating pressure max. 8 bar
• Replenishment reservoir 150 l
• Protection class IP 41
Technical data
• Mains connection 3~400 V, 50 Hz
• Fluid temperature max. +5 °C to +35 °C
• Operating pressure max. 10 bar
• Replenishment reservoir 400 l
• Protection class IP 54
Technical data
• Mains connection 1~230 V, 50 Hz
• Fluid temperature max. +5 °C to +35 °C
• Operating pressure max. 6 bar
• Replenishment reservoir 1,500 l
• Protection class IP 54
Technical data
• Mains connection 1~230 V, 50 Hz
3~400 V, 50 Hz
• Inlet pressure max. 1 bar
• Fluid temperature max. +5 °C to +35 °C
• Operating pressure max. 6 bar
• Protection class IP 44
• Suction/pressure side connections:
--WJ (G 1/G 1)
--FWJ (G 1/R 1)
--HWJ (G 1/Rp 1)
Equipment/function
• EC motor
• Pre-selectable control modes Δp-c,
Δp-v, Δp-T
• Pre-selectable speed for constant
operation
• Automatic setback operation for
additional savings potential
• Dual pump management
• Red-button technology for simple
operation
• Graphical pump display with rotating
display
• Remote control via infrared interface
(IR-Module/IR-Monitor)
• Integrated motor protection
• System extension due to retrofit
communication modules LON, CAN,
PLR, etc.
• Combination flanges PN 6/PN 10
(for DN 40 and DN 50)
• Thermal insulation shells as standard for
heating applications
Equipment/function
• Constant speed or for Star-Z 25/6,
20/4, 20/5, 20/7 three selectable speed
stages
• Blocking-current proof motor, motor
protection not required
• Quick connection with spring clips
• Thermal insulation as standard for
Star-Z 15 TT.
• Star-Z 15 TT with integrated timer and
thermostat, LC display with symbolic
language, red button technology and
automatic detection of the thermal
disinfection of the warm secondary hot
water tank, as well as ball shut-off valve
on the suction side and non-return valve
on the pressure side.
• Star-ZD version as double pump
Equipment/function
• Pre-selectable speed stages
• Thermal insulation as standard
• All plastic parts that come into
contact with the fluid fulfil KTW
recommendations
• Combination flange PN 6/PN 10
(DN 40 to DN 65)
• Extendable motor protection, signal and
display functions
• Full motor protection
• Cable feed into terminal box possible on
both sides (starting from P1 ≥ 250 W)
with integrated strain relief
Equipment/function
Single-stage, low-pressure centrifugal
pump in in-line design with
• Mechanical seal
• Threaded connection
• Motor with one-piece shaft
Equipment/function
• Connection-ready module with compact
construction
• Fully connected electrically and
hydraulically
• Mounted on vibration-insulated painted
steel tubular frames
• 2 centrifugal pumps MultiCargo MC
(self-priming)
• Joint tubing R 1 ½” on the pressure side,
inc. transmitter unit, diaphragm pressure
vessel, shut-off device
• Pressure gauge 0-10 bar
• Ball valve on suction and pressure sides
• Water replenishment reservoir (150 l) with
float valve
• RainControl Professional central
switchgear with control electronics,
level sensor
• Menu-based operation and display
• Cyclical pump cycling and test run when
pump at rest
• Automatic fault-actuated switchover and
peak-load cut-in
• Automatic water exchange in the
replenishment reservoir, prevents lime
deposits
• Permanent display of rainwater storage
level, system pressure and operating
status
Equipment/function
• Connection-ready module with compact
construction
• Fully connected electrically and
hydraulically
• Mounted on vibration-insulated
baseplate
• 2 MultiPress MP centrifugal pumps
(non-self-priming)
• Joint tubing R 1½” on the pressure side,
inc. transmitter unit, diaphragm pressure
vessel, shut-off device
• Pressure gauge 0-10 bar
• Ball valve on suction and pressure sides
and non-return valve
• High-volume hybrid tank with all
connections, calmed inlets and overflow
with siphon
• RainControl Hybrid central switchgear
with control electronics
• Signals concerning operation and faults
• Cyclical pump cycling and test run when
pump at rest
• Automatic fault-actuated switchover and
peak-load cut-in
• Automatic water exchange in the
replenishment reservoir
• Permanent display of rainwater storage
tank level, system pressure, operating
status (optional)
Equipment/function
• 1 centrifugal pump MultiCargo MC
(self-priming)
• Electronic pump control with WiloFluidControl
• Connection cable with plug
• 1500 litre storage tank made of
polyethylene
• Make-up funnel
• Dome cover
• Protection against low water level
• Flexible connection on pressure side
• 4 transport carrying handles Other
versions, additionally with
• Automatic water replenishment
• Sable set
• Overflow protection when installed under
backflow level
Extension kits can be retrofitted at any
time.
Equipment/function
• With or without carrying frame,
depending on the version (WJ, FWJ)
• For single-phase AC motor (1~230 V)
-- Connection cable with plug
-- On/Off switch
• Thermal motor protection switch
Special features
• Up to 80 % over circulation pumps
without speed control
• Highest degrees of efficiency due to
ECM technology
• Corrosion-resistant pump housing made
of red brass
Special features
• All plastic parts that come into
contact with the fluid fulfil KTW
recommendations
Special features
• Pump communication in simple and safely
retrofit plug-in technology
• Easy installation due to combination
flange, nominal diameter DN 40 to DN 65
Special features
• High resistance to corrosive fluids due to
stainless steel housing and Noryl impeller
• Wide range of applications due to
suitability for water with hardness values
up to 5 mmol/l (28 °dH)
• All plastic parts that come into
contact with the fluid fulfil KTW
recommendations
Special features
• Low-noise due to multistage centrifugal
pumps
• All parts that come in contact with the
fluid are corrosion-free
• Maximum operational safety due to
fully electronic RainControl Professional
controller
• High economic efficiency due to fresh
water replenishment according to
requirements
• High reliability due to DVGW-certified,
flow-optimised and noise-optimised
replenishment reservoir
Special features
• Low-noise due to multistage centrifugal
pumps
• All parts that come in contact with the
fluid are corrosion-free
• Maximum operational reliability, due to
trendsetting fully electronic RainControl
Hybrid controller
• High economic efficiency due to fresh
water replenishment according to
requirements
• High reliability, due to flow- and
noiseoptimised overall concept
• Automatic control of the feeding pump
• System/level control in the low-voltage
range
Special features
• Low-noise, self-priming pump ensures
almost noiseless system operation
• Corrosion-free
• Can be expanded at any time
• Multi-tank system with replenishment
and setting zone for better water quality
(Wilo MKS system)
• Greatest possible connection flexibility,
due to rotating rainwater inlet
Special features
• Ideal for portable outdoor applications
(hobby, garden)
• HWJ version with diaphragm pressure
vessel and pressure switch
• FWJ version with fluid control for system
control
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
11
Product category
Glandless high-efficiency pumps
Series
Wilo-Stratos-Z
Wilo-Stratos-ZD
Product category
Glandless standard pumps
Series
Wilo-Star-Z
Wilo-Star-ZD
Product category
Glandless standard pumps
Series
Wilo-TOP-Z
Product category
Glanded special pumps
Series
Wilo-VeroLine IP-Z
Product category
Rainwater utilisation systems
Series
Wilo-RainSystem AF 150
Product category
Rainwater utilisation systems
Series
Wilo-RainSystem AF 400
Product category
Rainwater utilisation systems
Series
Wilo-RainCollector II RWN
Product category
Self-priming multistage pumps and
pump systems
Series
Wilo-Jet WJ
Wilo-Jet HWJ
Wilo-Jet FWJ
Design
Glandless circulation pump with threaded
connection and automatic power
adjustment
Design
Glandless circulation pump with threaded
connection
Design
Glandless circulation pump with threaded
connection
Design
Glanded circulation pump in in-line design
with threaded connection
Design
Automatic rainwater utilisation system with
2 self-priming pumps
Design
Automatic rainwater utilisation system
with run-down tank container and 2 non
self-priming pumps
Design
Ready-to-plug rainwater utilisation system
with rainwater tank
Design
Self-priming multistage centrifugal pumps
Application
Secondary hot water circulation systems
and similar systems in industrial and
building services
Application
Secondary hot water circulation systems
and similar systems in industrial and
building services
Application
Secondary hot water circulation systems
and similar systems in industrial and
building services
Application
For pumping potable water, cold and
hot water (in accordance with VDI 2035)
without abrasive substances, in heating,
cold water and cooling water systems
Application
Rainwater utilisation in multi-family houses
and small trade businesses for saving
potable water in conjunction with cisterns
or tanks
Application
Hybrid system for commercial and industrial
rainwater utilisation for saving potable
water in conjunction with cisterns or tanks
Application
Rainwater utilisation for saving potable
water
Application
For pumping water from wells for filling,
pumping empty, transferring by pumping,
irrigation and sprinkling. As emergency
pump for overflows
Q max.
41 m³/h
Q max.
5.5 m³/h
Q max.
65 m³/h
Q max.
5 m³/h
Q max.
12 m³/h
Q max.
16 m³/h
Q max.
4 m³/h
Q max.
5 m³/h
H max.
12 m
H max.
6.0 m
H max.
9m
H max.
4.5 m
H max.
58 m
H max.
56 m
H max.
52 m
H max.
50 m
Technical data
• Perm. temperature range of secondary
hot water up to water hardness of
3.56 mmol/l (20 °d) max. +80 °C
• Heating water -10 °C to +110 °C
• Mains connection 1~230 V, 50 Hz
• Protection class IP X4D
• Nominal diameter Rp 1 to DN 50
• Max. operating pressure screw-end
pumps 10 bar flange pumps 6/10 bar
Technical data
• Fluid temperature secondary hot water up
to water hardness 3.2 mmol/l (18 °d) max.
+65 °C
in short-term operation (2 h) up to +70 °C
• Heating water -10 °C up to +110 °C (not
Star-Z 15 TT)
• Mains connection 1~230 V, 50 Hz or for
Star-Z 25/2 DM 3~400 V, 50 Hz
• Protection class IP 44 (IP 42 for
Star-Z 15 TT)
• Nominal diameter Rp ½, Rp 1
• Max. operating pressure 10 bar
Technical data
• Perm. temperature range of secondary
hot water up to a water hardness of 3.56
mmol/l (20 °d) max. +80 °C
• Heating water -10 °C to +110 °C
• Mains connection:
--1~230 V, 50 Hz (depending on type)
--3~400 V, 50 Hz
--3~230 V, 50 Hz (with optional
switching plug)
• Protection class IP X4D
• Nominal diameter Rp 1 to DN 50
• Max. operating pressure screw-end
pumps 10 bar
• Flange pumps 6/10 bar
Technical data
• Perm. temperature range of secondary
hot water up to a water hardness of
4.99 mmol/l (28 °d) max. +65
• In short-term operation (2 h) up to +110 °C
• Heating water -8 °C to +110 °C
• Mains connection 1~230 V, 50 Hz,
3~400 V, 50 Hz
• Protection class IP 44
• Nominal diameter Rp 1
• Max. operating pressure 10 bar
Technical data
• Mains connection 1~230 V, 50 Hz
• Suction head max. 8 m
• Fluid temperature max. +5 °C to +35 °C
• Operating pressure max. 8 bar
• Replenishment reservoir 150 l
• Protection class IP 41
Technical data
• Mains connection 3~400 V, 50 Hz
• Fluid temperature max. +5 °C to +35 °C
• Operating pressure max. 10 bar
• Replenishment reservoir 400 l
• Protection class IP 54
Technical data
• Mains connection 1~230 V, 50 Hz
• Fluid temperature max. +5 °C to +35 °C
• Operating pressure max. 6 bar
• Replenishment reservoir 1,500 l
• Protection class IP 54
Technical data
• Mains connection 1~230 V, 50 Hz
3~400 V, 50 Hz
• Inlet pressure max. 1 bar
• Fluid temperature max. +5 °C to +35 °C
• Operating pressure max. 6 bar
• Protection class IP 44
• Suction/pressure side connections:
--WJ (G 1/G 1)
--FWJ (G 1/R 1)
--HWJ (G 1/Rp 1)
Equipment/function
• EC motor
• Pre-selectable control modes Δp-c,
Δp-v, Δp-T
• Pre-selectable speed for constant
operation
• Automatic setback operation for
additional savings potential
• Dual pump management
• Red-button technology for simple
operation
• Graphical pump display with rotating
display
• Remote control via infrared interface
(IR-Module/IR-Monitor)
• Integrated motor protection
• System extension due to retrofit
communication modules LON, CAN,
PLR, etc.
• Combination flanges PN 6/PN 10
(for DN 40 and DN 50)
• Thermal insulation shells as standard for
heating applications
Equipment/function
• Constant speed or for Star-Z 25/6,
20/4, 20/5, 20/7 three selectable speed
stages
• Blocking-current proof motor, motor
protection not required
• Quick connection with spring clips
• Thermal insulation as standard for
Star-Z 15 TT.
• Star-Z 15 TT with integrated timer and
thermostat, LC display with symbolic
language, red button technology and
automatic detection of the thermal
disinfection of the warm secondary hot
water tank, as well as ball shut-off valve
on the suction side and non-return valve
on the pressure side.
• Star-ZD version as double pump
Equipment/function
• Pre-selectable speed stages
• Thermal insulation as standard
• All plastic parts that come into
contact with the fluid fulfil KTW
recommendations
• Combination flange PN 6/PN 10
(DN 40 to DN 65)
• Extendable motor protection, signal and
display functions
• Full motor protection
• Cable feed into terminal box possible on
both sides (starting from P1 ≥ 250 W)
with integrated strain relief
Equipment/function
Single-stage, low-pressure centrifugal
pump in in-line design with
• Mechanical seal
• Threaded connection
• Motor with one-piece shaft
Equipment/function
• Connection-ready module with compact
construction
• Fully connected electrically and
hydraulically
• Mounted on vibration-insulated painted
steel tubular frames
• 2 centrifugal pumps MultiCargo MC
(self-priming)
• Joint tubing R 1 ½” on the pressure side,
inc. transmitter unit, diaphragm pressure
vessel, shut-off device
• Pressure gauge 0-10 bar
• Ball valve on suction and pressure sides
• Water replenishment reservoir (150 l) with
float valve
• RainControl Professional central
switchgear with control electronics,
level sensor
• Menu-based operation and display
• Cyclical pump cycling and test run when
pump at rest
• Automatic fault-actuated switchover and
peak-load cut-in
• Automatic water exchange in the
replenishment reservoir, prevents lime
deposits
• Permanent display of rainwater storage
level, system pressure and operating
status
Equipment/function
• Connection-ready module with compact
construction
• Fully connected electrically and
hydraulically
• Mounted on vibration-insulated
baseplate
• 2 MultiPress MP centrifugal pumps
(non-self-priming)
• Joint tubing R 1½” on the pressure side,
inc. transmitter unit, diaphragm pressure
vessel, shut-off device
• Pressure gauge 0-10 bar
• Ball valve on suction and pressure sides
and non-return valve
• High-volume hybrid tank with all
connections, calmed inlets and overflow
with siphon
• RainControl Hybrid central switchgear
with control electronics
• Signals concerning operation and faults
• Cyclical pump cycling and test run when
pump at rest
• Automatic fault-actuated switchover and
peak-load cut-in
• Automatic water exchange in the
replenishment reservoir
• Permanent display of rainwater storage
tank level, system pressure, operating
status (optional)
Equipment/function
• 1 centrifugal pump MultiCargo MC
(self-priming)
• Electronic pump control with WiloFluidControl
• Connection cable with plug
• 1500 litre storage tank made of
polyethylene
• Make-up funnel
• Dome cover
• Protection against low water level
• Flexible connection on pressure side
• 4 transport carrying handles Other
versions, additionally with
• Automatic water replenishment
• Sable set
• Overflow protection when installed under
backflow level
Extension kits can be retrofitted at any
time.
Equipment/function
• With or without carrying frame,
depending on the version (WJ, FWJ)
• For single-phase AC motor (1~230 V)
-- Connection cable with plug
-- On/Off switch
• Thermal motor protection switch
Special features
• Up to 80 % over circulation pumps
without speed control
• Highest degrees of efficiency due to
ECM technology
• Corrosion-resistant pump housing made
of red brass
Special features
• All plastic parts that come into
contact with the fluid fulfil KTW
recommendations
Special features
• Pump communication in simple and safely
retrofit plug-in technology
• Easy installation due to combination
flange, nominal diameter DN 40 to DN 65
Special features
• High resistance to corrosive fluids due to
stainless steel housing and Noryl impeller
• Wide range of applications due to
suitability for water with hardness values
up to 5 mmol/l (28 °dH)
• All plastic parts that come into
contact with the fluid fulfil KTW
recommendations
Special features
• Low-noise due to multistage centrifugal
pumps
• All parts that come in contact with the
fluid are corrosion-free
• Maximum operational safety due to
fully electronic RainControl Professional
controller
• High economic efficiency due to fresh
water replenishment according to
requirements
• High reliability due to DVGW-certified,
flow-optimised and noise-optimised
replenishment reservoir
Special features
• Low-noise due to multistage centrifugal
pumps
• All parts that come in contact with the
fluid are corrosion-free
• Maximum operational reliability, due to
trendsetting fully electronic RainControl
Hybrid controller
• High economic efficiency due to fresh
water replenishment according to
requirements
• High reliability, due to flow- and
noiseoptimised overall concept
• Automatic control of the feeding pump
• System/level control in the low-voltage
range
Special features
• Low-noise, self-priming pump ensures
almost noiseless system operation
• Corrosion-free
• Can be expanded at any time
• Multi-tank system with replenishment
and setting zone for better water quality
(Wilo MKS system)
• Greatest possible connection flexibility,
due to rotating rainwater inlet
Special features
• Ideal for portable outdoor applications
(hobby, garden)
• HWJ version with diaphragm pressure
vessel and pressure switch
• FWJ version with fluid control for system
control
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
11
Product category
Self-priming multistage pumps and
pump systems
Series
Wilo-MultiCargo MC
Wilo-MultiCargo HMC
Wilo-MultiCargo FMC
Product category
1RQVelf-priming multistage pumps and
pump systems
Series
Wilo-MultiPress MP
Wilo-MultiPress HMP
Wilo-MultiPress FMP
Product category
Non-self-priming water supply unit
with frequency converter
Series
Wilo-EMHIL
Product category
Cistern pumps
Series
Wilo-Sub TWI 5/TWI 5-SE
Wilo-Sub TWI 5-SE P&P
Product category
Pump control
Series
Wilo-IR-Stick, IR-Module, IR-Monitor
Wilo-IF-Module Stratos/Wilo-IF-Module
Wilo-Protect-Module-C
Product category
Glandless high-efficiency pumps
Series
Wilo-Stratos-ECO-ST
Product category
Glandless high-efficiency pumps
Series
Wilo-Star-Z NOVA
Product category
Glandless high-efficiency pumps
Series
Wilo-Stratos-ECO-Z
Wilo-Stratos-ECO-Z … BMS
Design
Self-priming multistage centrifugal pumps
Design
Non-self-priming multistage centrifugal
pumps
Design
Non-self-priming water supply unit with
frequency converter
Design
Submersible pumps
Design
-
Design
Glandless circulation pump with threaded
connection, EC motor and automatic power
adjustment
Design
Glandless circulation pump with threaded
connection and blocking-current proof
synchronous motor
Design
Glandless circulation pump with threaded
connection and automatic power
adjustment
Application
For domestic water supply, sprinkling,
irrigation, spraying and rainwater utilisation
Application
For domestic water supply, sprinkling,
irrigation, spraying and rainwater utilisation
Application
• Water supply and pressure boosting
• Rainwater utilisation
• Irrigation and spraying
Application
For domestic water supply from wells,
cisterns and tanks. For irrigation, sprinkling,
rainwater utilisation or for pumping out
water
Application
Wilo-Control products for connecting
pumps to the building automation
Application
Circulation in solar heating systems
Application
Secondary hot water circulation systems
and similar systems in industrial and
building services
Application
Secondary hot water circulation systems
and similar systems in industrial and
building services
Q max.
7 m³/h
Q max.
8 m³/h
Q max.
55 m³/h
Q max.
16 m³/h
H max.
57 m
H max.
57 m
H max.
8m
H max.
88 m
Technical data
• Mains connection 1~230 V, 50 Hz
3~400 V, 50 Hz
• nlet pressure max. 4 bar
• Fluid temperature max. +5 °C to +35 °C
• Ambient temperature max. +40 °C
• Operating pressure max. 8 bar
• Protection class IP 54
• Suction/pressure side connections:
--MC (Rp 1/Rp 1)
--FMC (R 1/Rp 1)
--HMC (Rp 1/Rp 1)
Technical data
• Mains connection 1~230 V, 50 Hz
3~400 V, 50 Hz
• Inlet pressure max. 6 bar
• Fluid temperature max. +5 °C to +35 °C
• Ambient temperature max. +40 °C
• Operating pressure max. 10 bar
• Protection class IP 54
• Suction/pressure side connections:
--MP 3.. Rp 1 (Rp 1); MP 6.. Rp 1¼/Rp 1
--FMP 3.. R 1/Rp 1; FMP 6.. R 1¼/Rp 1
--HMP 3.. Rp 1/Rp 1; HMP 6.. Rp 1¼/Rp 1
Technical data
• Maximum operating pressure: 10 bar
• Max. fluid temperature: 40 °C
• Min. fluid temperature: 0 °C
• Maximum ambient temperature: 50 °C
• Mains connection: 1~230 V, 50/60 Hz
Technical data
• Mains connection 1~230 V, 50 Hz
3~400 V, 50 Hz
• Fluid temperature max. +3 °C to +40 °C
• Operating pressure max. 10 bar
• Protection class IP 68
• Connection on pressure side Rp 1¼
• Connection on suction side for SE
version Rp 1¼
Q max.
-
Q max.
2.5 m³/h
Q max.
0.4 m³/h
Q max.
2.5 m³/h
H max.
-
H max.
5m
H max.
0.9 m
H max.
5m
Technical data
-
Equipment/function
• Directly flanged motor
• Thermal motor protection switch for
single-phase AC motor (1~230 V)
Equipment/function
• Directly flanged motor
• Thermal motor protection switch for
1~230 V version
Equipment/function
• including 1.4 m mains connection and
plug
• including EMC filter
• with built-in pressure and flow monitors
Technical data
• Perm. temperature range +15 °C to
+110 °C
• Mains connection 1~230 V, 50 Hz
• Protection class IP 44
• Nominal diameter Rp 1
• Max. operating pressure 10 bar
Technical data
• Fluid temperature: Potable water up
to 3.56 mmol/l (20 °d): max. +65 °C, in
short-term operation (2 h) up to +70 °C
• Mains connection 1~230 V, 50 Hz
• Protection class IP 42
• Threaded connection Rp ½
• Max. operating pressure 10 bar
Technical data
• Fluid temperature of secondary hot water
up to a water hardness of 3.2 mmol/l
(18 °d) max. +65 °C
• In short-term operation (2 h) up
to +70 °C
• Heating water: +15 °C to +110 °C
• Mains connection 1~230 V, 50 Hz
• Protection class IP 44
• Nominal diameter Rp 1
• Max. operating pressure 10 bar
Equipment/function
Wilo-IR-Stick, IR-Module, IR-Monitor
• Remote control with infrared interface for
electronically controlled Wilo pumps
Wilo-IF-Modules Stratos/IF-Modules
• Plug-in module for BA connection of
Stratos, Stratos GIGA, IP-E, DP-E, IL-E/
DL-E, MHIE, MVIE, Helix VE...
Wilo-Protect-Module-C
• Plug-in module for building automation
control of TOP-S/SD pumps without
speed control
Equipment/function
• EC motor
• Control modes Δp-v and Δp-c
• Automatic setback operation for
additional savings potential
• Red-button technology for simple
operation
• Blocking current-proof motor
• Cable lead-in on both sides for easy
installation
• Quick connection with spring clips
• Connection for building automation (BA)
• Pump housing with cataphoretic coating
for external corrosion protection
Equipment/function
• Quick electrical connection with WiloConnector
• Blocking current-proof motor
• Integrated ball shut-off valve on the
suction side (Star-Z NOVA A, Star-Z NOVA
C only)
• Integrated non-return valve on the
pressure side (Star-Z NOVA A, StarZ NOVA C only)
• Including digital plug-in time switch
(Star-Z NOVA C only)
• Including 1.8 m connecting cable with
shock-proof plug (Star-Z NOVA C only)
• Including thermal insulation
Equipment/function
• EC motor
Special features
-
Special features
• High efficiency motor technology
• Up to 80 % electricity savings over
circulation pumps without speed control
• Highest degrees of efficiency due to ECM
technology
• Min. electronic power consumption
only 5.8 W
• 3 times higher starting torque than
conventional circulation pumps
Special features
• Extremely low power consumption: 2 to
4.5 Watt due to new synchronous motor
• Materials of the highest quality: with
stainless steel impeller. This results in
a top hygiene standard, durability and
reliable protection against corrosion.
• Extended field of application for
calcareous water: up to 20° dH
• Flexible service motor: Fast replacement
of all common pump types
• Quick and convenient electrical
connection with no tools required thanks
to Wilo-Connector
Special features
• Corrosion-resistant pump housing made
of red brass for systems where oxygen
entry is possible
• 3 times higher starting torque than
conventional circulation pumps
• All plastic parts that come into
contact with the fluid fulfil KTW
recommendations
• Min. electronic power consumption only
5.8 W
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Special features
• Low-noise
• Ideal as a base-load pump for rainwater
utilisation
• HMC version with diaphragm pressure
vessel and pressure switch
• FMC version with fluid control for system
control
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Special features
• Low-noise
• Ideal as a base-load pump for rainwater
utilisation
• HMP version with diaphragm pressure
vessel and pressure switch
• FMP version with fluid control for system
control
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Equipment/function
• Connection cable, 20 m
• TWI 5 version with standard inlet basket
• Variants
--SE: with lateral inlet connecting piece
--FS: with built-in float switch
• Thermal motor protection for EM
version (1~230 V)
• Version TWI 5-SE Plug & Pump
additionally with
--pressure and flow controller
Wilo-Fluidcontrol
--On-/Off switch
--Floating suction fine filter incl. suction
hose
Special features
• Heavy-duty multistage pump with
stainless steel hydraulics
• Easy operation and adjustment
--Large display (32 characters) with plain
text display
--4 LEDs for clear status display
--Simplified menu navigation
--Plug & Play, the system is preassembled and fitted with connecting
cable
• Complies to EMC standards (EN 610006-2 and EN 61000-6-3) in the domestic
area thanks to installed filters
• APP function: periodic analysis of
the system behaviour and automatic
adjustment of the control parameters
(PID)
• AIS function: automatic short-period
running to prevent the hydraulics freezing
up at temperatures < 5 °C
• ART function: system automatically
attempts to restart after a fault
• Float switch can be connected optionallly
Special features
• Ready-to-plug in EM version (1~230 V)
• Pump (housing, stages, impellers) made
entirely of stainless steel 1.4301
(AISI 304)
• Self-cooling motor
• Installation possible outside water
• Thermal motor protection for EM version
(1~230 V)
Information
Online catalogue www.wilo.com
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
• Control mode Δp-v
(BMS versions Δp-v and Δp-c)
• Automatic setback operation for
additional savings potential
• Red-button technology for simple
operation
• Blocking current-proof motor
• Cable lead-in on both sides for easy
installation
• Quick connection with spring clips
• Thermal insulation shell
9
Product category
Glandless Premium high-efficiency
pumps
Series
Wilo-Stratos PICO
Product category
Glandless Standard high-efficiency
pumps
Series
Wilo-Yonos PICO
Product category
Glandless Premium high-efficiency
pumps
Series
Wilo-Stratos
Wilo-Stratos-D
Product category
Glanded high-efficiency pumps in
in-line design
Series
Wilo-Stratos GIGA
Design
Glandless circulation pump with threaded
connection, EC motor and automatic power
adjustment.
Design
Glandless circulation pump with threaded
connection, EC motor and automatic power
adjustment.
Design
Glandless circulation pump with threaded
connection or flange connection, EC motor
and automatic power adjustment.
Design
High-efficiency inline pump with EC motor
and electronic duty adaptation in glanded
construction. Version as singlestage
low-pressure centrifugal pump with flange
connection and mechanical shaft seal.
Application
All hot water heating systems,
airconditioning applications, industrial
circulation systems.
Application
All hot water heating systems,
airconditioning applications, industrial
circulation systems.
Application
Hot-water heating systems of all kinds,
air-conditioning systems, closed cooling
circuits, industrial circulation systems
Application
Pumping of heating water (acc. to VDI
2035), cold water and water/glycol mixtures
without abrasive substances in heating,
cold water and cooling systems.
Q max.
4 m³/h
Q max.
3.5 m³/h
Q max.
61 m³/h
Q max.
44 m³/h
H max.
6.0 m
H max.
6.0 m
H max.
13 m
H max.
52 m
Technical data
• Fluid temperature +2 °C to +110 °C
• Mains connection 1~230 V, 50 Hz
• Protection class IP X4D
• Threaded connection Rp ½, Rp 1 and Rp
1¼
• Max. operating pressure 10 bar
Technical data
• Fluid temperature +10 °C to +110 °C
• Mains connection 1~230 V, 50 Hz
• Protection class IP X2D
• Threaded connection Rp ½, Rp 1
and Rp 1¼
• Max. operating pressure 6 bar
Technical data
• Perm. temperature range -10 °C to
+110 °C
• Mains connection 1~230 V, 50 Hz
• Protection class IP X4D
• Nominal diameter Rp 1 to DN 100
• Max. operating pressure
screw-end pumps 10 bar
• Flange-end pumps 6/10 bar / 6 bar
(special version: 10 bar or 16 bar
Technical data
• Permitted temperature range of the fluid
-20 °C to +140 °C
• Mains connection:
3~440 V (±10 %), 50 Hz/60 Hz
3~400 V (±10 %), 50 Hz/60 Hz
3~380 V (-5 %/+10 %), 50 Hz/60 Hz
• Protection class IP 55
• Max. operating pressure 16 bar to +120
°C, 13 bar to +140 °C
Equipment/function
• Control mode: Δp-c and Δp-v, Dynamic
Adapt control function combinied with
Δp-v
• Automatic setback operation
• Automatic venting routine
• Automatic deblocking function
• Red-button technology for simple
operation
• Display indication of current power
consumption in W and accumulated
electricity consumption in kWh
• Reset function for resetting the
electricity meter
• Reset function for resetting to the factory
settings
• Blocking current-proof motor
• Particle filter
• Quick electrical connection with WiloConnector
• Options:
-Design with bronze pump housing for
use in underfloor heating systems,
-Versions with short port-to-port length
130 mm
Equipment/function
• Control mode: Δp-c and Δp-v
• Setting the pump output (delivery head)
• Automatic venting function
• Automatic deblocking function
• Red-button for simple operation
• LED display to adjust the setpoint and to
show the current consumption in watts
• Blocking current-proof motor
• Particle filter
• Quick electrical connection with WiloConnector
• Options:
-Versions with short port-to-port
length 130 mm
Equipment/function
• EC motor
• Pre-selectable control modes Δp-c,
Δp-v, Δp-T
• Automatic setback operation for
additional savings potential
• Dual pump management
• Red-button technology for simple
operation
• Graphical pump display with rotating
display
• Remote control via infrared interface
(IR-Module/IR-Monitor)
• Integrated motor protection
• System expansion by means of
retrofittable interface modules for
communication: Modbus, BACnet, CAN,
LON, PLR etc.
• Pump housing with cataphoretic coating
• Combination flanges PN 6/PN 10
(for DN 32 to DN 65)
• Thermal insulation shells as standard for
heating applications
Equipment/function
Single-stage, low-pressure centrifugal
pump in in-line design with
• Mechanical seal
• Flange connection
• Lantern
• Coupling
• EC motor with electronic power
adjustment
Special features
• Energy efficiency index (EEI) <0.20
• High-efficiency pump especially for single
and two-family houses, as well as for two
to six-family houses.
• Up to 90 % electricity savings compared
to old uncontrolled heating pumps
• Only 3 watts min. power consumption
• Very high starting torque for reliable
starting
• Integrated motor protection
• Venting routine for automatic venting
of the rotor chamber
Special features
• Energy efficiencyindex (EEI) <0.20
• High-efficiency pump especially for single
and two-family houses, as well as for two
to six-family houses.
• Only 4 watts min. power consumption
• Very high starting torque for reliable
starting
• Integrated motor protection
• Venting function to vent the rotor
chamber
• Flexible installation due to compact
design
Special features
• Energy efficiencyindex (EEI) <0.23
• Up to 80 % electricity savings over
circulation pumps without speed control
• Highest degrees of efficiency due to
ECM technology
Special features
• Innovative high-efficiency pump for
the highest overall degrees of efficiency
based on a new Wilo glanded design
• High-efficiency EC motor (degrees of
efficiency above IE4 limit values acc. to
IEC TS 60034-31 Ed.1)
• New hydraulics optimally adapted to
the EC motor technology
• Integrated electronic power adjustment
• Extremely compact and space-saving
design
• Simple operation by tried-and-tested
red-button technology and display
• Various control modes Δp-c, Δp-v, PID
and n-const. (control mode)
• Control range up to three times greater
than in conventional electronically
controlled pumps
• Analogue interfaces 0-10 V, 2-10 V, 0-20
mA, 4-20 mA
• Optional interfaces for bus
communication using plug-in IF-Modules
• Integrated dual-pump management with
efficiency-optimised peak-load cut-in
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Product category
Horizontal, multistage centrifugal
pumps
Series
Wilo-Economy MHI
Product category
Horizontal, multistage centrifugal
pumps
Series
Wilo-Economy MHIE
Product category
Vertical, multistage centrifugal pumps
Series
Wilo-Multivert MVISE
Design
Non-self-priming multistage pump
Design
Non-self-priming multistage pump with
integrated frequency converter
Design
Non-self-priming multistage pump with
glandless pump motor
Design
Non-self-priming multistage pump with
glandless pump motor and integrated
frequency converter
Application
• Water supply and pressure boosting
• Commerce and industry
• Cooling water circulation systems
• Washing and sprinkling systems
Application
• Water supply and pressure boosting
• Industrial circulation systems
• Process engineering
• Cooling water circulation systems
• Washing and sprinkling systems
Application
• Water supply and pressure boosting
Application
• Water supply and pressure boosting
Q max.
25 m³/h
Q max.
30 m³/h
Q max.
14 m³/h
ax.
14 m³/h
H max.
70 m
H max.
84 m
H max.
110 m
H max.
110 m
Technical data
• Fluid temperature -15 to +110 °C
• Operating pressure max. 10 bar
• Inlet pressure max. 6 bar
• Protection class IP 54
Technical data
• Fluid temperature -15 to +110 °C
• Operating pressure max. 10 bar
• Inlet pressure max. 6 bar
• Protection class IP 54
Technical data
• Fluid temperature -15 to +50 °C
• Operating pressure 16 bar
• Inlet pressure 6 bar
• Protection class IP 44
Technical data
• Fluid temperature -15 to +50 °C
• Operating pressure 16 bar
• Inlet pressure 6 bar
• Protection class IP 44
• Emitted interference in compliance with
EN 61000-6-1
• Interference resistance in compliance
with EN 61000-6-2
Equipment/function
• Stainless steel pump in monobloc design
• Threaded connection
• Single-phase or three-phase AC motor
• Single-phase AC motor with integrated
thermal motor protection
Equipment/function
• Stainless steel in monobloc design
• Threaded connection
• Integrated frequency converter
• Single-phase or three-phase AC motor
• Three-phase version with red-button
technology and LCD display for state
indication
• Integrated thermal motor protection
Equipment/function
• Stainless steel pump in in-line design
• Three-phase AC motor in glandless pump
design
Equipment/function
• Stainless steel pump in in-line design
• Glandless pump
• Self-venting
• Hydraulics in 1.4301
• Oval flange, round flange
• Three-phase AC motor with integrated
frequency converter, with red-button
technology and LCD display for state
indication
• Integrated thermal motor protection
• Protection against low water level
Special features
• All parts that come in contact with the
fluid are made of stainless steel 1.4301
(AISI 304) or 1.4404 (AISI 316)
• Compact design
• All relevant components have KTW and
WRAS approval
Special features
• Easy commissioning
• All parts that come in contact with the
fluid are made of stainless steel 1.4301
(AISI 304) or 14404 (AISI 316L)
• Compact design
• Integrated frequency converter
• Full motor protection
• All relevant components have KTW and
WRAS approval
Special features
• Low-noise (up to 20 dB(A) quieter than
conventional pumps)
• All parts that come in contact with the
fluid are corrosion-resistant
• Glandless pump technology
• All relevant components have KTW and
WRAS approval
Special features
• Easy commissioning
• Glandless pump technology
• Low-noise (up to 20 dB(A) quieter than
conventional pumps)
• Integrated frequency converter
• All components that come in contact
with the fluid are made of stainless steel
1.4301 (AISI 304)
• All relevant components have KTW and
WRAS approval
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Information
Online catalogue www.wilo.com
Information
Online catalogue www.wilo.com
13
Materials:
• Pump housing and lantern: EN-GJL-250
• Impeller: PPS-GF40
• Shaft: 1.4122
• Mechanical seal: AQ1EGG Other
mechanical seals: on request
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air- Conditioning, Cooling
We are continually adding to this series.
Product category
Vertical, multistage centrifugal pumps
Series
Wilo-Multivert MVIS
Product category
Vertical, multistage centrifugal pumps
Series
Wilo-Helix-V
Product category
Vertical, multistage centrifugal pumps
Series
Wilo-Helix-VE
Product category
Vertical, multistage centrifugal pumps
Series
Wilo-Helix EXCEL
Product category
Vertical, multistage centrifugal pumps
Series
Wilo-Multivert MVI
Design
Non-self-priming multistage pump
Design
Non-self-priming multistage pump with
integrated frequency converter
Design
Non-self-priming multistage pump with EC
motor with integrated high-efficiency drive
Design
Non-self-priming multistage pump
Application
• Water supply and pressure boosting
• Industrial circulation systems
• Process water
• Cooling water circulation systems
• Fire extinguishing systems
• Washing systems
• Irrigation
Application
• Water supply and pressure boosting
• Industrial circulation systems
• Process water
• Cooling water circulation systems
• Washing systems
• Irrigation
Application
• Water supply and pressure boosting
• Industrial circulation systems
• Process water
• Cooling water circulation systems
• Fire extinguishing systems
• Washing systems
• Irrigation
Application
• Water supply and pressure boosting
• Fire extinguishing systems
• Boiler feed
• Industrial circulation systems
• Process engineering
• Cooling water circulation systems
• Washing and sprinkling systems
Q max.
80 m³/h
Q max.
80 m³/h
Q max.
58 m³/h
Q max.
155 m³/h
H max.
250 m
H max.
240 m
H max.
243 m
H max.
240 m
Technical data
• Fluid temperature -30 to +120 °C
• Operating pressure max. 16/25 bar
• Inlet pressure max. 10 bar
• Protection class IP 55
• PN 16 and PN 25 with loose round flanges
Technical data
• Fluid temperature -20 to +120 °C
• Operating pressure max. 16/25 bar
• Inlet pressure max. 10 bar
• Protection class IP 55
• PN 16 and PN 25 with loose round flanges
Technical data
• Fluid temperature: -20 to +120 °C with
EPDM (-10 to +90 °C with FKM gasket)
• Operating pressure max.: 16/25 bar
• Protection class: IP 55
• Helix EXCEL 2-16:
PN 16 with oval flanges and PN 25 with
round flanges in accordance with
ISO 2531 and ISO 7005
• Helix EXCEL 22-36:
PN 25 with round flanges in accordance
with ISO 2531 and ISO 7005
Technical data
• Fluid temperature -15 to +120 °C
• Operating pressure max. 16/25 bar
• Inlet pressure max. 10 bar
• Protection class IP 55
Equipment/function
• Impellers, stage chambers and pump
housing stainless steel 1.4301/1.4404
(AISI304L/AISI316L)
• Versions with 1.44xx stainless steel
designed for aggressive fluids
• Versions
--PN 16 with oval flanges and PN 25 with
round DIN flanges
--Helix V22, 32, 52 PN 16 and PN 25 with
round loose flanges in accordance with
ISO 2531 and ISO 7005
• IE2/IEC standard three-phase AC motor
Equipment/function
• Impellers, stage chambers and pump
housing stainless steel 1.4301/1.4404
(AISI304L/AISI316L)
• Versions with 1.44xx stainless steel
designed for aggressive fluids
• PN 16 and PN 25 versions with round
loose flanges in accordance with ISO 2531
and ISO 7005
• IE2/IEC standard three-phase AC motor
• Integrated frequency converter
Equipment/function
• Impellers, diffusors and stage housings
made of stainless steel
• Versions in 1.44xx stainless steel for
aggressive fluids
• High-efficiency EC motor (degrees of
efficiency higher than the IE4 limit values
acc. to IEC TS 60034-31 Ed.1)
• Optional interfaces for BUS
communication via plug-in IF-modules
Equipment/function
• Stainless steel pump in in-line design
• Versions
--MVI 1.. up to 16..-6 PN 16 with oval
flanges and PN 25 with round DIN
flanges
--MVI 16.. to 95.. PN 16/PN 25 with round
DIN flanges
--Victaulic connections (PN 25)
depending on pump type
• IE2/IEC standard three phase motor,
2-pole, AC or DC version. Single-phase
AC motor with integrated thermal motor
protection
Special features
• Efficiency-optimised, laser-welded
2D/3D high-efficiency hydraulics
• Easy pump replacement without pipe
modification. Due to the modular pump
housing, Helix pumps can be installed in
existing pipes.
• User-friendly mechanical seal with
cartridge, equipped with a standard seal
for easy maintenance
• Potable water approval according to
ACS/KTW/WRAS for all parts that come in
contact with the fluid
Special features
• Efficiency-optimised, laser-welded
2D/3D high-efficiency hydraulics
• Easy pump replacement without pipe
modification. Due to the modular pump
housing, Helix pumps can be installed in
existing pipes.
• User-friendly mechanical seal with
cartridge, equipped with a standard seal
for easy maintenance
• Potable water approval according to ACS/
KTW/WRAS for all parts that come in
contact with the fluid
Special features
• Efficiency-optimised, laser-welded
2D/3D high-efficiency hydraulics
• Built-in electronic control thanks to the
High Efficiency Drive with large control
range
• Choice of various different control modes
(speed control, constant pressure, and
PID).
• User-friendly mechanical seal with
cartridge, equipped with a standard seal
for easy maintenance
• The spacer coupling enables the
mechanical seal to be replaced without
dismantling the motor (from 7.5 kW and
higher)
• Intermediate bearings (Al203/CW) ensure
a long service life
• WRAS/KTW/ACS approval for all parts
that come in contact with the fluid (EPDM
version)
Special features
• MVI 1..-16..-6
All parts that come in contact with the
fluid made of stainless steel 1.4301
(AISI 304) or 14404 (AISI 316L)
• MVI 32..-95..
depending on pump type in stainless steel
1.4404 (AISI 316L) or 1.4301 (AISI 304)
with pump housing made of grey cast iron
EN-GJL-250, cataphoretic coating
• All relevant components have KTW and
WRAS approval
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Information
Online catalogue www.wilo.com
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Range Guide.
Building Services.
7
Heating, air-conditioning,
cooling.
Pumps, pump systems and accessories for
heating, air-conditioning and secondary hot
water.
> High-efficiency, energy-saving and
standard pumps in glandless and glanded
pump versions
> Pump regulators and controls, modules
for building automation and switchgears
> Lifting units for condensates
Water supply.
Pumps, pump systems and accessories for
> Rainwater utilisation
> Domestic water supply
> Commercial water supply and pressure
boosting
> Raw water intake
Drainage and sewage.
Pumps, pump systems and accessories for
> Wastewater collection and transport
> Drainage
> Pressure drainage
Product category
Wilo Online Catalogue www.wilo.co.uk.
Building Services - Commercial.
Product category
Product category
Product category
Vertical, multistage centrifugal pumps
Series
Wilo-Multivert-MVIE
Single-pump pressure boosting systems
Series
Wilo-Economy CO-1 MVIS … /ER
Wilo-Economy CO-1 MVI … /ER
Wilo-Economy CO-1 Helix-V … /CE+
Single-pump pressure boosting systems
with speed-controlled pump
Series
Wilo-Comfort-N-Vario COR-1 MVISE …
Wilo-Comfort-Vario COR-1 MHIE …
Wilo-Comfort-Vario COR-1 MVIE …
Wilo-Comfort-Vario COR-1 Helix-VE …
Wilo-SiBoost Smart 1 Helix VE ...
Multi-pump pressure boosting systems
Series
Wilo-Economy CO 2-4 MHI … /ER
Wilo-Comfort-N-CO 2-6 MVIS … /CC
Wilo-Comfort-CO 2-6 MVI … /CC
Wilo-Comfort-CO 2-6 Helix-V … /CC
Design
Non-self-priming multistage pump with
integrated frequency converter
Design
Water-supply units with a non-selfpriming,
high-pressure multistage centrifugal pump
Design
Water-supply units with a non-selfpriming,
high-pressure multistage centrifugal pump
with integrated speed control
Design
Pressure boosting system with 2 to 6 nonself-priming, stainless steel, highpressure,
multistage centrifugal pumps switched
in parallel
Application
• Water supply and pressure boosting
• Industrial circulation systems
• Process engineering
• Cooling water circulation systems
• Washing and sprinkling systems
Application
For fully automatic water supply in inlet
mode from the public water supply network
or from a break tank
• For pumping potable water, process
water, cooling water, water for
firefighting or other service water
Application
For fully automatic water supply in inlet
mode from the public water supply network
or from a break tank
• For pumping potable water, process
water, cooling water, water for
firefighting or other service water
Application
For fully automatic water supply and
pressure boosting in residential,
commercial and public buildings, hotels,
hospitals, department stores and for
industrial systems
• For pumping potable water and
process water, cooling water, water for
firefighting or other service water
Q max.
145 m³/h
Q max.
135 m³/h
Q max.
97 m³/h
Q max.
800 m³/h
H max.
245 m
H max.
160 m
H max.
150 m
H max.
160 m
Technical data
• Fluid temperature -15 to +120 °C
• Operating pressure max. 16 bar/25 bar
• Inlet pressure max. 10 bar
• Protection class IP 54 or IP 55
Technical data
• Mains connection 3~230 V / 400 V, 50 Hz
(other versions on request)
• Fluid temperature max. 50 °C
• Operating pressure 10/16 bar
• Inlet pressure 6/10 bar
• Switching pressure stages 6 / 10 / 16 bar
• Protection class IP 41
Technical data
• Mains connection 3~400 V, 50 Hz
• Fluid temperature max. 50 °C
• Operating pressure 10/16 bar
• Inlet pressure 6/10 bar
• Protection class IP 44
Technical data
• Mains connection 3~230 V / 400 V, 50 Hz
• Fluid temperature max. 50 °C
• Operating pressure 10/16 bar
• Inlet pressure 6/10 bar
• Protection class IP 54
Equipment/function
• Stainless steel pump in in-line design
• PN 16 with oval flanges
• PN 16/25 with DIN round flanges,
Victaulic connections depending on pump
type
• Single-phase or three-phase current
standard motor
• Integrated frequency converter
• Integrated thermal motor protection
• Protection against low water level
Equipment/function
• 1 pump of the MVIS, MVI or Helix-V series
• Components that come in contact with
fluid are corrosion-resistant
• Base frame made of stainless steel 1.4301
with height-adjustable vibration dampers
for insulation against structure- borne
noise
• Pipework in stainless steel 1.4571
• Check valve, on pressure side
• Non-return valve, on pressure side
• Diaphragm pressure vessel 8 l, PN 16, on
pressure side
Equipment/function
• 1 pump of the MVIE, Helix-VE or MVISE
series with integrated frequency
converter
• All parts that come in contact with the
fluid are corrosion-resistant
• Pipework in stainless steel 1.4571
• Check valve, on pressure side
• Non-return valve, on pressure side
• Diaphragm pressure vessel 8 l, PN 16, on
pressure side
Equipment/function
• 2 to 4 or 2 to 6 pumps per system
• Components that come in contact with
fluid are corrosion-resistant
• Galvanised base frame with
heightadjustable vibration dampers for
insulation against structure-borne noise
• Pipework in stainless steel 1.4571
• Gear-operated shut-off ball cock/ annular
shut-off valve on every pump, on suction
and pressure sides
• Non-return valve, on pressure side
• Diaphragm pressure vessel 8 l, PN 16, on
pressure side
• Pressure sensor, on discharge side
Special features
• Easy commissioning
• Full motor protection
• Large control range
• MVIE 2..-16..-6
All parts that come in contact with the
fluid made of stainless steel 1.4301
(AISI 304) or 14404 (AISI 316L)
• MVIE 16..-95..
depending on pump type in stainless steel
1.4404 (AISI 316L) or 1.4301 (AISI 304)
with pump housing made of grey cast iron
EN-GJL-250, cataphoretic coating
• All relevant components have KTW and
WRAS approval
Special features
For systems with MVIS pump
• Virtually noiseless system due to a
glandless, high-pressure, multistage
centrifugal pump
• Up to 20 dB (A) quieter than conventional
systems with comparable hydraulic
output
• Operationally reliable due to the
combination with the ER-1 control device
For systems with Helix-V pump
• IE2 standard motors
• Efficiency-optimised, laser-welded
2D/3D hydraulics
• User-friendly mechanical seal with
cartridge, equipped with a standard seal
for easy maintenance
• Operationally reliable due to the
combination CE+ control device
Special features
• For systems with MVISE pump
• Virtually noiseless system due to the use
of glandless, stainless steel, highpressure,
multistage centrifugal pumps with
integrated frequency converter
• Up to 20 dB[A] quieter than conventional
systems with comparable hydraulic
output
For systems with Helix-VE pump
• IE2 standard motors
• Efficiency-optimised, laser-welded
2D/3D hydraulics
• User-friendly mechanical seal with
cartridge, equipped with a standard seal
for easy maintenance
Special features
• Compact system in accordance with the
requirements of DIN 1988
• 2 to 4 or 2 to 6 high-pressure, multistage
centrifugal pumps switched in parallel
• Easily adjustable and operationally reliable
due to integrated control devices
• Series with Helix-V with IE2 motors
For systems with MVIS pumps
• Virtually noiseless system due to a
glandless, high-pressure, multistage
centrifugal pump
• Up to 20 dB (A) quieter than conventional
systems with comparable hydraulic
output
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
Information
Online catalogue www.wilo.com
Building Services catalogue, Water Supply
15
Product category
Series
Wilo-Hydroplus-E (EBMS 2G)
Pumps
Horizontal and Vertical multi stage design
of stainless steel construction,
WRC approved.
Motor
Totally enclosed fan cooled (TEFC), IP54,
class F, 400 volts, three phase, direct on line
(DOL) starting via pump mounted inverter
Inverter
Each pump has an inbuilt inverter, giving
maximum reliability and flexibility. Each
inverter has a LCD providing status of pump
(on/off/faults), each inverter is equipped
with dry running protection.
Pipe Work
Stainless steel 14571, sized in accordance
with the overall hydraulic performance of
the unit.
Valves
DVGW certificated nickel-plated isolation
and non-return valves.
Pressure Sensor
Heavy duty piezoresistive
type transducers (4-20ma).
Accumulator
1 x 8 litre MWP 16 bar, WRc
approved c/w through flow shutoff valve
for testing and draining.
Control Panel
ABS enclosure, IP54 protection class with
isolator and fused protection per pump.
The EBMS control board is fitted inside
inverter no.1. The control board allows
fully automatic control upto a maximum
of 3 pumps in parallel. The set point can
be easily adjusted via a potentiometer
mounted on the control board.
Design
Max working Pressure:
MHIE: 10 Bar
MVIE: 16 Bar
Voltage: 400V/3PH/50HZ
Protection Index: IP54
EMC Compliance: EN61000-6-2/3
Product category
Series
Wilo-Comfort-Vario COR- MHI/VR
Pumps
Horizontal multi stage design of stainless
steel construction, WRC approved.
Motor
Totally enclosed fan cooled (TEFC), IP54,
class F, 230 volts, three phase, direct on line
(DOL) starting via panel mounted inverter.
Inverter
Each pump has a dedicated panel mounted
inveter, giving maximum reliability and
flexibility. The inverters typically employed
are panel mounted 6 pulse PWM type
inverter.
Pipe Work
Stainless steel 14571, sized in accordance
with the overall hydraulic performance of
the unit.
Valves
DVGW certificated nickel-plated isolation
and non-return valves.
Pressure Sensor
Heavy duty piezoresistive type transducers
(4-20ma).
Accumulator
1 x 8 litre MWP 16 bar, WRc approved c/w
through flow shutoff valve for testing and
draining.
Control Panel
VR-230V central control unit of fully
electronic modular design for automatic
control of a maximum of 3parallel pumps,
which contain integrated frequency
converters for the speed control. Sheet
steel enclosure, IP54 protection class, with
door interlocked isolator, LC display, access
to operation control parameters via a single
dial/ pushbutton.
Design
Max working 10 Bar
Voltage: 230V/1PH/50Hz
Protection Index: IP54
EMC Compliance: EN61000-6-2/3
3URGXFWFDWHJRU\
0XOWLSXPSSUHVVXUHERRVWLQJV\VWHPV
ZLWKVSHHGFRQWUROOHGSXPSV
6HULHV
:LOR&RPIRUW9DULR&250+,(Ë95
:LOR&RPIRUW19DULR&2509,6(Ë95
:LOR&RPIRUW9DULR&2509,(Ë95
:LOR&RPIRUW9DULR&25+HOL[9(Ë
'HVLJQ
3UHVVXUHERRVWLQJV\VWHPZLWKWR
QRQVHOISULPLQJVWDLQOHVVVWHHOKLJK
SUHVVXUHPXOWLVWDJHFHQWULIXJDOSXPSV
VZLWFKHGLQSDUDOOHOZLWKLQWHJUDWHG
VSHHGFRQWURO
$SSOLFDWLRQ
)RUIXOO\DXWRPDWLFZDWHUVXSSO\
DQGSUHVVXUHERRVWLQJLQUHVLGHQWLDO
FRPPHUFLDODQGSXEOLFEXLOGLQJVKRWHOV
KRVSLWDOVGHSDUWPHQWVWRUHVDQGIRU
LQGXVWULDOV\VWHPV
Ê )RUSXPSLQJSRWDEOHZDWHUDQGSURFHVV
ZDWHUFRROLQJZDWHUZDWHUIRUILUH
ILJKWLQJRURWKHUVHUYLFHZDWHU
4PD[
bPåK
+PD[
bP
7HFKQLFDOGDWD
Ê 0DLQVFRQQHFWLRQab9b+]
GHSHQGLQJRQW\SHDOVRab9
b+]
Ê )OXLGWHPSHUDWXUHPD[bo&
Ê 2SHUDWLQJSUHVVXUHbEDU
Ê ,QOHWSUHVVXUHbEDU
Ê 3URWHFWLRQFODVV,3b
(TXLSPHQWIXQFWLRQ
Ê WRSXPSVSHUV\VWHP
Ê &RQWLQXRXVFRQWURORSHUDWLRQGXH
WRSXPSVZLWKLQWHJUDWHGIUHTXHQF\
FRQYHUWHUV
Ê &RPSRQHQWVWKDWFRPHLQFRQWDFWZLWK
IOXLGDUHFRUURVLRQUHVLVWDQW
Ê *DOYDQLVHGEDVHIUDPHZLWKKHLJKW
DGMXVWDEOHYLEUDWLRQGDPSHUVIRU
LQVXODWLRQDJDLQVWVWUXFWXUHERUQHQRLVH
Ê 3LSHZRUNLQVWDLQOHVVVWHHO
Ê *HDURSHUDWHGVKXWRIIEDOOFRFN
DQQXODUVKXWRIIYDOYHRQHYHU\SXPS
RQVXFWLRQDQGSUHVVXUHVLGHV
Ê 1RQUHWXUQYDOYHRQSUHVVXUHVLGH
Ê 'LDSKUDJPSUHVVXUHYHVVHObO31
RQSUHVVXUHVLGH
Ê 3UHVVXUHVHQVRURQGLVFKDUJHVLGH
6SHFLDOIHDWXUHV
Ê &RPSDFWV\VWHPZLWKH[FHOOHQWYDOXHIRU
PRQH\GXHKLJKSUHVVXUHPXOWLVWDJH
FHQWULIXJDOSXPSVZLWKLQWHJUDWHG
IUHTXHQF\FRQYHUWHUV
Ê 6XSHUSURSRUWLRQDOO\ODUJHFRQWUROUDQJH
Ê ,QWHJUDWHGIXOOPRWRUSURWHFWLRQYLD37&
Ê ,QWHJUDWHGGU\UXQQLQJGHWHFWLRQZLWK
DXWRPDWLFFXWRXWLQHYHQWRIORZZDWHU
YLDSHUIRUPDQFHFKDUDFWHULVWLFVRIWKH
PRWRUFRQWUROHOHFWURQLFV
Ê 6HULHVZLWK+HOL[9ZLWK,(PRWRUV
)RUV\VWHPVZLWK09,6(SXPSV
Ê 9LUWXDOO\QRLVHOHVVV\VWHPGXHWRD
JODQGOHVVKLJKSUHVVXUHPXOWLVWDJH
FHQWULIXJDOSXPS
Ê 8SWRG%$TXLHWHUWKDQ
FRQYHQWLRQDOV\VWHPVZLWKFRPSDUDEOH
K\GUDXOLFRXWSXW
,QIRUPDWLRQ
2QOLQHFDWDORJXHZZZZLORFRP
%XLOGLQJ6HUYLFHVFDWDORJXH:DWHU6XSSO\
Product category
Series
CAT5 Booster Set
Heating, air-conditioning, cooling.
Pressure boosting.
Sewage disposal.
Wilo-Stratos high-efficiency pump
for heating, air-conditioning and
cooling worldwide.
Wilo pressure boosting systems
with Helix high-pressure
multistage centrifugal pumps.
Constant pressure at every level.
Wilo-DrainLift M, L.
Full-value and connection-ready
faeces lifting unit for detached and
semi-detached houses.
• Non domestic hose union taps
• Bin washdown
• Garden irrigation
• Laboratories
• Mortuary and embalming equipment
• Butchery and slaughter-house equipment
Description
The sets are provided with a single fixed
speed pump, MHI or a variable speed pump,
MHIE.
The MHI sets are controlled via pressure
switch, DOL motor starter and run on timer.
The MHIE sets are controlled via pressure
transducer and motor mounted inverter.
All are complete with a non return valve,
pressure gauge, 8lt vessel and outlet
isolation valve and tank draincock.
The water level in the break tank is
controlled via ½” BS1212 equilibrium float
valve which provides a flow rate of 1.2 l/s at
a minimum inlet pressure of 1 bar.
Low level protection is provided via side
mounted float switch.
Operation
The booster set monitors the system
pressure and as demand increases the
pressure will fall and the pump will start and
continue to run, until demand has stopped
and pressure increases to the set point.
The fixed speed booster sets have a run on
timer that overrides the pressure switch
for a set period to minimise the number of
starts per hour.
Connections
Inlet: ½” BSP
Outlet: 1” BSP
BMS: Volt free connection for pump fault
5
Highest efficiency at the
lowest life cycle costs.
The economic supply to
buildings increasingly
demands the use of
innovative systems from
optimally configured
components. Whether
in a detached or
semidetached home,
industrial, commercial
or public buildings,
hospitals or hotels: Wilo
assures everyone with its
high-efficiency pumps
and systems for heating
systems, air conditioning,
water supply and
sewage disposal. Many
processes within Facility
Management can be
controlled and regulated
by building automation
systems conveniently.
Wilo high-efficiency
pumps and Wilo pump
systems with electronic
controls offer the
best technological
foundations anywhere
in the market. They are
at home in any system
and can be integrated
optimally into building
automation. They offer
exceptional possibilities
for saving on power
and upkeep costs. An
investment, that will
soon be offset and more
than pay for itself in the
long run.
Product category
Building Services.
Pumps and pump systems for heating, air conditioning, cooling,
pressure boosting, water supply and sewage disposal in domestic
households, rented accommodation, administrative and
commercial buildings.
Standard glanded pumps
Series
Wilo-CronoNorm-NLG
Design
Baseplate pump with axial suction
Product category
Standard glanded pumps
Series
Wilo-CronoNorm-NL
Wilo-VeroNorm-NPG
Design
Single-stage low-pressure centrifugal
pump with axial suction, in accordance
with EN 733 and ISO 5199, mounted on
baseplate.
Application
• Pumping of clean or slightly soiled water
(max. 20 ppm) without solid matter for
water circulation, transfer and pressure
boosting
• For pumping cold and hot water
(according to VDI 2035) without abrasive
matter in
• heating, cold water and cooling water
installations
• Applications in municipal water supply,
irrigation, building services, general
industry, power stations, etc.
Application
• Pumping clean or slightly contaminated
water (max. 20 ppm) without solid matter
for circulation, transfer and pressure
boosting purposes.
• For pumping heating water in accordance
with VDI 2035, water/glycol mixtures,
cooling/cold water and process water.
• For applications in municipal water supply,
irrigation, building services, industry,
power stations etc.
Q max.
1,650 m³/h
Q max.
3,000 m³/h
H max.
103 m
H max.
140 m
Technical data
• Permitted temperature range -20 °C to
+120 °C
• Mains connection 3~400 V, 50 Hz
• Protection class IP 55
• Nominal diameters DN 150 to DN 300
• Max. operating pressure 16 bar
Technical data
• Perm. temperature range -20 °C to
+140 °C
• Mains connection 3~400 V, 50 Hz
• Protection class IP 55
• Nominal diameter on suction side DN 50
to DN 500
• Nominal diameter on pressure side DN 32
to DN 500
• Maximum operating pressure: depending
on type and application up to 16 bar
Equipment/function
• Single-stage horizontal spiral housing
pump with bearing bracket and
replaceable stationary wear rings in
process construction
• Shaft sealing by means of mechanical
seals according to EN 12756 or stuffing
box packing
• Spiral housing with directly cast pump
feet. Bearing of the pump shaft by means
of grease-lubricated grooved ball
bearings
• Shaft coupling with intermediate sleeve
Equipment/function
Single-stage low-pressure centrifugal
pump in monobloc design with coupling,
coupling protection, motor and baseplate
• Mechanical seal or stuffing box
• Wilo factory motor or ATB motor
Materials:
• Pump housing: EN-GJL-250
• Impeller: EN-GJL-250
• Shaft: 1.4028
Product category
Packaged pressurisation units
Series
Wilo-Comfort Series P135, P235, P160,
P260, P180, P280
Product Information
5 ¼ turn mini ball valves
Product category
Control devices
Series
Wilo-CC-HVAC system
Wilo-CCe-HVAC system
Wilo-VR-HVAC system
Design
-
Pipework
½” in brass and braided flexible hoses
¼” in brass and nylon tubing
Electrical supply
Input supply 230v/1ph/50Hz
Application
Switchgears for controlling 1 to 6 pumps
Volt free contact Max 5A at 230Vac
Switching Volt free contact Max 10A at
230Vac
Comfort Controller
The comfort controller works on a closed
loop pressure control via an analogue
pressure transducer and an electronic micro
processor ensuring accurate measurement
and feed back of system condition. The
control philosophy allows the duty pump
to run, ensuring the cold fill pressure is
met. 2 pump models will rotate the duty
automatically between both pumps
ensuring even wear; if the duty pump fails
the standby pump will start automatically.
Q max.
H max.
-
To ensure efficient operation of the sealed
system the comfort controller also monitors
the number of pump starts and changes in
pressure providing excess starts or system
leak alarms if operating out of the standard
parameters
Features
Main control PCB
Display PCB
Pressure Transducer
Flexible hose c/w wingnuts
½” non-return valve
1.2” inlet ball float valve
4” float to suit above
Float switch
Technical data
-
Equipment/function
Wilo-CC-HVAC System:
• Comfort control system for 1 to 6 pumps
switched in parallel, with fixed speed
Wilo-CCe-HVAC system:
• Comfort control system for a fully
automatic control of 1 to 6 pumps with
integrated electronics/speed control
or activation of external frequency
converters
Wilo-VR-HVAC System:
• Vario controller for 1 to 4 pumps
switched in parallel, with integrated
speed control
Materials:
• Pump housing and pressure cover: ENGJS-500-7
• Bearing bracket: EN-GJL-250
• Impeller: EN-GJL-250 (special version:
G-CuSn10)
• Shaft: 1.4028
• Stationary wear rings: G-CuSn10
• Mechanical seal: AQ1EGG (other
mechanical seals on request)
Special features
• Motors in IE2 technology with higher
efficiency as standard
• Reduced life cycle costs due to optimised
efficiency
• Bidirectional mechanical seal with forced
flushing
• Replaceable stationary wear rings
• Low NPSH-values, best cavitation
properties
• High availability of IEC standard motors
Worldwide
Special features
• Motors with higher efficiency as standard;
from 0.75 kW nominal motor power
motors with IE2 technology
• Other materials and versions on request
Special features
• Special versions on request
Information
Online catalogue www.wilo.com
Information
Online catalogue www.wilo.com
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
17
Product category
Glanded energy-saving pumps in
in-line design
Series
Wilo-VeroLine-IP-E
Wilo-VeroTwin-DP-E
Product category
Glanded energy-saving pumps in
in-line design
Series
Wilo-CronoLine-IL-E
Wilo-CronoTwin-DL-E
Product category
Glanded standard pumps in
in-line design
Series
Wilo-VeroLine-IPL
Wilo-VeroTwin-DPL
Product category
Glanded standard pumps in
in-line design
Series
Wilo-CronoLine-IL
Wilo-CronoTwin-DL
Design
Electronically controlled glanded pump in
in-line design with flange connection and
automatic power adjustment
Design
Electronically controlled glanded pump in
in-line design with flange connection and
automatic power adjustment
Design
Glanded pump in in-line design with
threaded connection or flange connection
Design
Glanded pump in in-line design with flange
connection
Application
For pumping heating water (in accordance
with VDI 2035), water-glycol mixtures and
cooling and cold water without abrasive
substances in heating, cold water and
cooling water systems
Application
For pumping heating water (in accordance
with VDI 2035), water-glycol mixtures and
cooling and cold water without abrasive
substances in heating, cold water and
cooling water systems
Application
For pumping heating water (in accordance
with VDI 2035), water-glycol mixtures and
cooling and cold water without abrasive
substances in heating, cold water and
cooling water systems
Application
For pumping heating water (in accordance
with VDI 2035), water-glycol mixtures and
cooling and cold water without abrasive
substances in heating, cold water and
cooling water systems
Q max.
170 m³/h
Q max.
680 m³/h
Q max.
245 m³/h
Q max.
1,150 m³/h
H max.
30 m
H max.
65 m
H max.
52 m
H max.
110 m
Technical data
• Permissible temperature range -20 °C to
+120 °C
• Mains connection:
3~400 V, 50 Hz;
3~380 V, 60 Hz
• Protection class IP 55
• Nominal diameter DN 32 to DN 80
• Max. operating pressure 10 bar (special
version: 16 bar)
Technical data
• Permissible temperature range -20 °C to
+140 °C
• Mains connection:
3~400 V, 50 Hz;
3~380 V, 60 Hz
• Protection class IP 55
• Nominal diameter DN 40 to DN 80
• Max. operating pressure 16 bar
Technical data
• Perm. temperature range -20 °C to
+120 °C
• Mains connection 3~400 V, 50 Hz
• Protection class IP 55
• Nominal diameter Rp 1 to DN 100
• Max. operating pressure 10 bar
(special version: 16 bar)
Technical data
• Perm. temperature range -20 °C
to+140 °C
• Mains connection 3~400 V, 50 Hz
• Protection class IP 55
• Nominal diameter DN 32 to DN 250
• Max. operating pressure 16 bar
(25 bar on request)
Equipment/function
Single-stage, low-pressure centrifugal
pump in in-line design with
• Mechanical seal
• Flange connection
• Motor with integrated electronic speed
control
• DP-E with switchover valve
Equipment/function
Single-stage, low-pressure centrifugal
pump in in-line design with
• Mechanical seal
• Flange connection
• Lantern
• Coupling
• Engine with integrated electronic power
adjustment
• DL-E with switchover valve
Equipment/function
Single-stage, low-pressure centrifugal
pump in in-line design with
• Mechanical seal
• For flange connection with pressure
measuring connection R ½
• Motor with one-piece shaft
• DPL with switchover valve
Equipment/function
Single-stage, low-pressure centrifugal
pump in in-line design with
• Mechanical seal
• Flange connection with pressure
measuring connection R ½
• Lantern
• Coupling
• IEC standard motor
• DL with switchover valve
Materials:
• Pump housing and lantern: EN-GJL-250
• Impeller: PPO-GF30
• Shaft: 1.4021
• Mechanical seal: AQEGG
Other mechanical seals: on request
Materials:
• Pump housing and lantern: EN-GJL-250
• Impeller:
Standard version: EN-GJL-200
special version: G-CuSn 10
• Shaft: 1.4122
• Mechanical seal: AQEGG
Other mechanical seals: on request
Materials:
• Pump housing and lantern: EN-GJL-250
• Impeller: PPO fibreglass-reinforced
EN-GJL-200 (depending on pump type)
• Shaft: 1.4021
• Mechanical seal: AQEGG; other
mechanical seals on request
Materials:
• Pump housing and lantern:
Standard version: EN-GJL-250
Optional: Spheroidal cast iron
EN-GJS-400-18-LT
• Impeller:
Standard: EN-GJL200
Special version: Red brass G-CuSn 10
• Shaft: 1.4122
• Mechanical seal: AQEGG
Other mechanical seals: on request
Special features
• Motors with higher efficiency as standard;
from 0.75 kW nominal motor power
motors with IE2 technology
• Energy savings due to integrated
electronic power control
• Simple operation with red-button
technology and display
• Various control modes Δp-c, Δp-v, PID
and n-const. (control mode)
• Analogue interfaces 0-10 V, 2-10 V, 0-20
mA, 4-20 mA
• Optional interfaces for bus
communication using plug-in IF-Modules
• Integrated dual pump management
• Integrated full motor protection (PTC
thermistor sensor) with trip electronics
Special features
• Motors with IE2 technology for higher
efficiency fitted as standard
• Energy savings due to integrated
electronic power control
• Simple operation with red-button
technology and display
• Various control modes Δp-c, Δp-v, PID
and n-const. (control mode)
• Analogue interfaces 0-10 V, 2-10 V, 0-20
mA, 4-20 mA
• Optional interfaces for bus
communication using plug-in IF-Modules
• Integrated dual pump management
• Integrated full motor protection (PTC
thermistor sensor) with trip electronics
Special features
• Motors with higher efficiency as standard;
from 0.75 kW nominal motor power
motors with IE2 technology
• Standard condensate drainage holes in
the motor housings and lanterns
• Series version: Motor with
one-piece shaft
• Version N: Standard motor B5 or V1 with
stainless steel plug shaft
• Bidirectional mechanical seal with
forced flushing
• Easy to install due to feet with threaded
holes on pump housing
Special features
• Motors with higher efficiency as standard;
from 0.75 kW nominal motor power
motors with IE2 technology
• Reduced life cycle costs due to optimised
efficiency
• Standard condensate drainage holes in
the motor housings
• Can be used flexibly in air-conditioning
and cooling systems, with application
benefits due direct draining of
condensate via optimised lantern design
(patented)
• Bidirectional mechanical seal with forced
flushing
• High worldwide availability of standard
motors (according to Wilo specifications)
and standard mechanical seals
• Easy to install due to feet with threaded
holes on pump housing
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Information
Online catalogue www.wilo.com
Building Services catalogue, Heating,
Air-Conditioning, Cooling
Worldwide.
High-efficiency solutions from Wilo.
3
WILO SE, with headquarters in Dortmund, is one
of the world’s leading manufacturers of pumps
and pump systems for heating, air conditioning
and cooling technology, as well as for water
supplies and sewage treatment and disposal.
Founded in 1872 as Kupfer- und
Messingwarenfabrik Louis Opländer, the company
has almost 70 branches worldwide and over
6,200 employees.
Turnover amounted to 1,021.4 million EUR in
2010. International recognition has increased
rapidly since the company became a European
limited liability company (SE) in 2008.
Wilo pumps and systems set global standards
for efficiency and technical performance: with
high-efficiency solutions for all applications in
the segments.
Product category
Product category
Product category
Product category
Special glanded pumps in in-line design
Series
Wilo-VeroLine-IPH-W
Wilo-VeroLine-IPH-O
Special glanded pumps in in-line design
Series
Wilo-VeroLine-IPS
Design
Glanded pump in in-line design with flange
connection
Design
Glanded pump in in-line design with
threaded connection or flange connection
Design
Glanded pump in monobloc design with
flange connection
Design
Glanded pump in monobloc design
with threaded connection or Victaulic
Connection
Application
IPH-W: For pumping hot water without
abrasive matter in closed industrial
circulation systems, district heating, closed
heating systems, etc. IPH-O: For pumping
heat transfer oil in closed industrial
circulation systems
Application
For pumping cold and hot water (in
accordance with VDI 2035) without
abrasive substances in heating, cold water
and cooling water systems.
Application
For pumping cold and hot water (in
accordance with VDI 2035) without
abrasive substances in heating, cold water
and cooling water systems.
Application
For pumping water-glycol mixtures with
20 to 40 %
Q max.
80 m³/h
Q max.
13 m³/h
Q max.
360 m³/h
Q max.
80 m³/h
H max.
38 m
H max.
3m
H max.
105 m
H max.
25 m
Technical data
• Permissible temperature range IPH-W:
-10 °C to +210 °C (at a max. of 23 bar)
• Permissible temperature range IPH-O:
-10 °C to +350 °C (at a max. 9 bar)
• Mains connection 3~400 V, 50 Hz
• Protection class IP 55
• Nominal diameter DN 20 to DN 80
Technical data
• Perm. temperature range -10 °C
to+140 °C
• Mains connection 3~400 V, 50 Hz
• Protection class IP 55
• Nominal diameter Rp 1, DN 40 and DN 50
• Max. operating pressure 10 bar or 6 bar
for flange connection
Technical data
• Perm. temperature range -20 °C
to +140 °C
• Mains connection 3~400 V, 50 Hz
• Protection class IP 55
• Nominal diameter DN 32 to DN 150
• Max. operating pressure 16 bar
(25 bar on request)
Technical data
• Perm. temperature range -15 °C to
+60 °C
• Mains connection 3~400 V, 50 Hz
• Protection class IP 55
• Nominal diameter G2/G 1½
(only BAC 40… /S) or Victaulic connection
∅ 60.3/48.3 mm (BAC 40… /R)
∅ 76.1/76.1 mm (BAC 70…/R)
• Max. operating pressure 6.5 bar
Equipment/function
Single-stage, low-pressure centrifugal
pump in in-line design with
• Mechanical seal
• Flange connection
• Lantern
• Motor with special shaft
Equipment/function
Single-stage, low-pressure centrifugal
pump in in-line design with
• Mechanical seal or stuffing box
• Threaded or flange connection with
pressure measuring connection R ⅛
• Standard motor
Equipment/function
Single-stage low-pressure centrifugal
pump in block design, with axial suction
port and radially arranged pressure
port with
• Mechanical seal
• Flange connection with pressure
measuring connection R ⅛
• Lantern
• Coupling
• IEC standard motor
Equipment/function
Single-stage low-pressure centrifugal
pump in monobloc design, with axial
suction port and radially arranged
pressure port
Materials:
• Pump housing and lantern: EN-GJL-200
• Impeller: Plastic
• Shaft: 1.4021
• Mechanical seal: BVEGG
Other mechanical seals on request
Glanded monobloc pumps
Series
Wilo-CronoBloc-BL
Materials:
• Pump housing standard: EN-GJL-250
Optional: EN-GJS-400-18
• Impeller (standard): EN-GJL-200
Special version: Bronze G-CuSn10
• Shaft: 1.4122
• Mechanical seal: AQEGG
Other mechanical seals on request
Glanded monobloc pumps
Series
Wilo-BAC
Materials:
• Pump housing: PA 6.6 50 % GF
• Impeller: PA/PPO, fibreglass-reinforced
• Shaft: X30Cr13
• Mechanical seal:
• Motors with higher efficiency as standard;
from 0.75 kW nominal motor power
motors with IE2 technology
• Reduced life cycle costs due to optimised
efficiency
• Pump housing in plastic design
• Version with Victaulic or threaded
connection (BAC 70/135... with Victaulic
connection only)
Special features
• From 0.75 kW nominal motor power
motors with IE2 technology for higher
efficiency fitted as standard
• Bidirectional, self-cooled mechanical seal
• Great variety of applications by a
large fluid temperature range without
additional wearing parts
Special features
• Worldwide availability of the standard
motors used
Special features
• Motors with higher efficiency as standard;
from 0.75 kW nominal motor power
motors with IE2 technology
• Meets user requirements due to
performance and main dimensions in
accordance with EN 733
• Long motor life due to standard
condensate drainage holes in the motor
housing
• Corrosion protection due to cataphoretic
coating
Special features
• Motors with higher efficiency as standard;
from 0.75 kW nominal motor power
motors with IE2 technology
• Reduced life cycle costs due to optimised
efficiency
• Pump housing in plastic design
• Version with Victaulic or threaded
connection (BAC 70/135... with Victaulic
connection only)
Information
Online catalogue www.wilo.com
Information
Online catalogue www.wilo.com
Information
Online catalogue www.wilo.com
Information
Online catalogue www.wilo.com
19
WILO UK Limited
Centrum 100, Second Avenue
Burton on Trent, Staffs DE14 2WJ
T +44 (0) 1283 523000
F +44 (0) 1283 523099
[email protected]
www.wilo.co.uk
Wilo Ireland
Unit B1, Corcanree Business Park
Dock Road, Limerick, Ireland
T: +353 (0)61 227566
F: +353 (0)61 229017
[email protected]
www.wilo.ie
Future proof high efficiency
products from Wilo.
Range Guide.
Building Services - Commercial.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement