Transceiver, 10Base-T RJ45 to 10Base-5 (Thicknet) DB15M (AUI) Model: LCTP-10BT-10B5 Applications • Used to convert 10Base-T (RJ45 Interface) to an 10Base-5 (DB15M/ AUI Interface) Network • LED lights simplify troubleshooting and network maintenance • No power supply needed, saves space and money • Set switch allows you to enable or disable the SQE function depending on your application Specifications Standard: Conforms to IEEE 802.3 10Base-T standard Interface: Meets FCC part 15 subject J, Class A requirements Connectors Support: DB15M/ AUI connector for connection to host, RJ-45 jack for connection to Hub Cable Length: 50m between Transceiver & Host 100m between Transceiver & Hub Transmission: Base band Topology: Star Access Method: CSMA/CD Transmission Rate: 10 Megabits per second Operating Temperature: 0-55 degrees Celsius Humidity: 10-90% non-condensing Dimensions: 3.1” x 1.35” x 0.75” Package Contents: LCTP-10BT-10B5 Transceiver, User’s Manual Description L-com’s 10Base-T transceivers are small & lightweight, designed to connect your existing Thick Ethernet Adapter Card to a 10Base-T UTP network. This super-slim model accommodates installation into narrow slot spaces typically found in older SUN SPARC™, IBM®, RISC/6000™ and Apple Macintosh™ systems. The transceiver converts 10Base-5 signals via a DB15M/ AUI connector to a standard RJ45 jack for 10Base-T Ethernet for transmission over Unshielded Twisted-Pair cable. L-com, Inc. 50 High St., West Mill, 3rd Floor, Suite #30 North Andover, MA 01845 www.L-com.com E-mail: [email protected] Phone: 1-800-343-1455 Fax: 1-978-689-9484 © L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project