Installation Instructions 75126 Toyota Sequoia 44089

Frame

Hitch Shown In Proper Position

Equipment Required:

Fastener Kit: F75126

Wrenches: 18mm, 3/4, 7/8

Drill Bits: None

Existing weldnuts both sides

Frame

Fascia

Installation Instructions

Toyota Sequoia

Part Numbers:

75126

44089

Fascia

3

4

Hitch type

Weight Distributing

Weight Carrying

Ball Mount

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

Max Gross

Trailer WT (LB)

6500 (2951 Kg)

5000 (2270 Kg)

Max Tongue

WT (LB)

650 (295 Kg)

500 (227 Kg)

Wiring Access Location: SUV7

1

2

3

Qty. (6)

Metric

Bolt head marking

Bolt M12 X 1.25 X 45mm

2

1

Qty. (10)

Qty. (4)

Conical Washer 1/2”

Bolt 1/2-13 X 3.50

2

5

Saddle bar

English

Bolt head marking

4

5

Qty. (4)

Qty. (4)

Block

Hex Nut 1/2-13

1 . Lower spare tire.

2. Raise hitch into position, making sure to slide saddle bar under fascia, and attach side bracket fasteners as shown. Do not tighten.

3. Install fasteners to saddle bar and tighten all fasteners.

4. Raise spare tire into position.

Tighten all M12 CL8.8 fasteners with torque wrench to 68 Lb.-Ft. (92 N*M)

Tighten all 1/2 GR5 fasteners with torque wrench to 75 Lb.-Ft. (102 N*M)

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.

z

2001, 2002, 2006 Cequent Towing Products Sheet 1 of 1 N75126 6-27-06 Rev. B

Form: F205 Rev A 5-6-05