AUDIO CONTRACTOR - ZAJ PRO

FBT Elettronica SpA

62019 Recanati (M C) - Italy

Tel: +39 071 750591

Fax: +39 071 7505920 [email protected] - www.fbt.it

(International Headquarter - Factory)

FBT Audio (UK) Ltd

South Croydon, Surrey, U K

Tel: 0844 310 4592

Fax: 0844 310 4594 [email protected]

www.fbtaudio.co.uk

FBT USA, Inc.

Palm Coast, Florida, U S

Tel: 800 333 9383 [email protected]

Distributed by

AUDIO CONTRACTOR general catalogue 2013•2014

2013-2014

Sound Design Project for the Municipal Casino in Venice

• Settings:

12 rooms (max size 400 m 2 )

• Requirements:

Amplifi cation system designed to select

4 music sources for 4 independent zones.

Minimal visual impact of loudspeakers

• Operating system:

1 MMS4004 4x4 matrix

1 MMZ8004 mixer featuring 4 output buses

• Power amplifi ers:

3 MCA2240A multi-channel power amp.

• Loudspeakers:

30 STUDIO4/BT loudspeakers, 2-way, 60W RMS

applied to the ceiling

• Microphone bases:

1 MBT8004 unit for selected announcements in individual zones and generating automatic alarm messages

2

Controller

Router

Class D Modular Amplifi ers / Main frame

Voice Alarm Integrated Equipment

Emergency Paging Units

MAD 4IP

Conference System CS series

Expansion Kit

Intercom 1300

Hand-held microphones

Gooseneck microphones

Condenser microphones

Microphone bases

Desktop bases

Wireless microphones and accessories

UHF microphones and receivers

Preamplifi er/mixer

4 zone preamplifi er

Security and Emergency Systems

9

10

11

12

14

High Quality Audio

16

Conference Systems

22

23

Intercom Systems

24

Microphones - Microphone bases

26

26

28

29

30

Wireless microphones

33

34

Preamplifi er equipment

36

38

Zone paging unit

Control units and mixers

39

Power amplifi ers

Multi-channel power amplifi ers

Multi-channel amplifi ers constant voltage

40

42

Racks and cabinets

Racks and cabinets, accessories 43

Music sources

Music sources 45

Amplifi cation equipment

Integrated amplifi ers

Music distribution system

46

50

Ceiling loudspeakers and sound projectors

ABS surface mounting wall loudspeakers

Wall or ceiling speakers

Loudspeaker cabinets

Loudspeakers for underwater and clean room applications

ABS surface mounting wall loudspeakers and accessories

Mini surface mounting loudspeakers

DNH metal sound projectors

DNH ABS sound projectors

Sound projectors

Spherical speaker

Musical horn loudspeakers

ABS horn loudspeakers

62

63

64

68

69

61

54

54

55

56

57

58

Column speakers

Sound projectors

Wall mounting speakers

Ceiling speakers

Horn speakers

Loudspeaker cabinets

Permanent installation loudspeakers

Column speakers

All weather loudspeakers

External sound speakers

Speaker systems

Weatherproof loudspeakers

81

82

83

66

67

68

69

70

71

78

3

4

Wherever we go, we like to be heard.

We aim for total customer satisfaction.

We believe in fully customised sound-designs.

To provide high quality sound for every setting.

We achieve this thanks to our highly fl exible range, customised designs and constant research into innovation.

Highly specialised in ambient amplifi cation systems

Audio Contractor: a young and wise leader

This Brand, with a strategic and productive lay-out of the latest generation, was offi cially set up in 1998 as a Division of the FBT Group.

Highly specialised in ambient amplifi cation systems, Audio

Contractor benefi ts from all the know-how and extensive expertise acquired by the parent company in over 40 years of business.

In a short space of time, Audio Contractor has made its mark on the market, integrating and implementing a winning combination of strengths: attaining total customer satisfaction, constant innovation, offering an extensive range of products, top quality sound performance, and non-stop after-sales service 365 days a year.

Sound design: stylish designs

At the very heart of the corporate philosophy, the concept of “Sound Design”, an original outlook on production and service aiming for standards of excellence in terms of technology and acoustics along with the “custom-made” design of the application venue - including theatres, conference halls, shopping centres, factories and hospitals. The major strengths of the brand, i.e. top quality, new developments and maximum reliability all contribute to offer an extensive and constantly updated range of products, distinguished by a stylish aesthetic look that epitomises the “made in Italy”.

Music in the genes

The love of music and the application of this love, in an industrial context, to sound reinforcement are part of FBT’s genetic make-up. A

Group destined for success, because it traces its origins back to a special, unique part of the world in the Marche region called Recanati, where music has always bee an essential part of the very fabric of society. Originally a small workshop established in the Nineteen

Sixties, the Group is today recognised on a national and international scale as a leader in the manufacture of a variety of equipment, ranging from the Professional Audio Equipment amplifi cation systems to the Audio Contractor ambient amplifi cation, and also the Musical

Instrument Distribution division, with a continuous growth trend.

... extensive range of products, top quality sound performance, and non-stop after-sales service...

5

Sound systems for large venues...

Solutions for professionals...

66

Clear announcements.

Hi-Fi music programming. Integrated control consoles, designed to create certain “frequencies” in every setting. Customised equipment.

To make our customers feel even more at home, both in Italy and abroad, we design integrated sound systems. To refl ect and interpret the sound “image” of every venue.

Thanks to a sturdy know-how geared towards attaining the utmost standards of excellence,

Audio Contractor provides sound designs to meet the requirements of every “leading” venue.

The Eighteenth-Century Villa Foscarini -

Cornaro in Gorgo al Monticano - Treviso, the

“Le Brentelle” Shopping Centre in Rubano -

Padua and the Municipal Casino in Venice, overlooking the Grand Canal, are but a few of the most prestigious projects completed.

Solutions for professionals

All of which are stubbornly devised to integrate the use of the most advanced technologies, with the smoothest aesthetic and architectural blend.

SECURITY AND

EMERGENCY SYSTEMS

Polideportivo Usabal

Tolosa - Spain

7

This series of products has been designed and engineered to offer the most innovating solutions in the realization of alarms systems, in order to manage emergency situations and to permit the guided evacuation, according to actual regulations (EN 54-16, ISO 7240-19 e EN 60849).

The VAIE 2250 offers the right answer for any system requirement; the combined action of the new control units and the new digital amplifi ers permits fl exible and easily expandable installations both for numbers of zones and for sound power, in compliance with safety standards.

The complete architecture of

VAIE 2250 system is based on the controller VAC 2006, the management and diagnostics unit. It is highly recommended for big as well as small installations, where high performance of security, fl exibility and easiness are required.

Each VAC 2006 can manage 6 lines to which the following units can be directly connected:

• DPU range of digital amplifi ers, equipped with a diagnostics card (up to 16 per line)

• Router VAR 2006 for up to

6 outputs zones with A & B speaker lines

• VAC 2006 Integrated Voice

Evacuation Systems with 6 zones

The remote consoles FMD 2001 and FMD 2012 are fully diagnosed, and allow greater operational and management fl exibility for any service and/or emergency calls and/or prerecorded messages on the zones of the system.

The possibility to connect in daisy chain up to 6 controller VAC 2006 and to manage up to 36 lines allows to realize up to 216 zones for voice evacuation/music.

CAT5 network assures an easy connection of the several units, controllers, routers, digital amplifi ers and emergency and/ or paging call stations. This solution performs in effi cient and economic installation also in big buildings, allowing the usage of both local and centralized equipment.

8

VAC 2006 CONTROLLER AND

DIGITAL AMPLIFIER DPU

SERIES

It is possible to connect 6 controllers VAC 2006 to each other and to manage up to a maximum of 36 groups of DPU digital amplifi ers, obtaining a 2 channel system with 36 output zones with double line.

MBT 1106

I/O CONTACTS

FIRE UNIT

VAC 2006

CONTROLLER

MICROPHONE

VAIE 2250 VOICE ALARM INTEGRATED EQUIPMENT ALRM FAULT DIS.

SYS. BATT.

ON

EMERGENCY

ALRT

RESET

EVAC.

1 2 3 4 5 6

MENU

OK

ESC

TO PC

EXT.

CAT5 SFTP

VAC 2006

CONTROLLER

MICROPHONE

VAIE 2250 VOICE ALARM INTEGRATED EQUIPMENT ALRM FAULT DIS.

SYS. BATT.

ON

EMERGENCY

ALRT

RESET

EVAC.

1 2 3 4 5 6

MENU

OK

ESC

TO PC

EXT.

Z.1

Z.6

LINE A

LINE B

LINE A

LINE B

Z.7

COM.-SYS

CTRL.IN

MAINS

BATTERY

VAR 2006

GND

SP.Z1-3

SP.Z4-6

FAULTS

MUS.-SPARE

ALARM

VOICE ALARM ROUTER

MSG.

CTRL.IN

DISABLE

STATUS

FAULT

ZONE OUTPUT

LINE A

LINE B

PROGRAM INSERTION

VAR 2006

ROUTER

EMERG.

CALL

ON

BATT.

LINE A

LINE B

ON dB -40 -10 -6 -3

ON

GND

SPK

AMP.

OVL

HOT POWER

OFF

DPU 1500C Digital Power Unit

DPU 1500C

BACKUP 100V

ON dB -40 -10 -6 -3

ON

GND

SPK

AMP.

OVL

HOT POWER

OFF

DPU 1125C

ON

Digital Power Unit

DPU 1125C

LINE A

LINE B

ON dB dB

-40 -10 -6 -3

ON

GND

SPK

AMP.

OVL

HOT POWER

OFF

Digital Power Unit DPU 1250C

DPU 1250C

LINE A

LINE B

BACKUP

100V

500 W

ON dB -40 -10 -6 -3

ON

GND

SPK

AMP.

OVL

HOT POWER

OFF

Digital Power Unit DPU 1500C

DPU 1500C

Z.8

Z.9

24VDC OUT

TO ALL

SECONDARY PSU IN

MPA 5480 BOOSTER 1

VOICE

500 W

MPA 5480 BOOSTER 2

MUSIC/SPARE

SON 24V 6A MS40

BATTERY CHARGER

LINE A

LINE B

ON dB -40 -10 -6 -3

ON

GND

SPK

AMP.

OVL

HOT POWER

OFF

Digital Power Unit DPU 1125C

ON

DPU 1125C

LINE A

LINE B

ON dB dB -40

ON

GND

-10

SPK

-6

AMP.

-3

OVL

HOT POWER

OFF

Digital Power Unit DPU 1250C

DPU 1250C

BACKUP

100V

ON dB dB -40

ON

GND

-10

SPK

-6

AMP.

-3

OVL

HOT POWER

OFF

Digital Power Unit DPU 1250C

DPU 1250C

COM.-SYS

CTRL.IN

MAINS

BATTERY

VAR 2006

GND

SP.Z1-3

FAULTS

SP.Z4-6

MUS.-SPARE

VOICE ALARM ROUTER

ALARM

CTRL.IN

STATUS

DISABLE

FAULT

ZONE OUTPUT

MSG.

LINE A

LINE B

LINE A

LINE B

LINE A

LINE B

PROGRAM INSERTION

VAR 2006

ROUTER

EMERG.

CALL

ON

BATT.

500 W

MPA 5480 BOOSTER 1

PMD Series Digital power unit

VOICE

500 W

MPA 5480 BOOSTER 2

PMD Series Digital power unit VOICE

500 W

MPA 5480 BOOSTER 3

MUSIC/SPARE

Z.10

Z.15

MBT 1106

MBT 1112

(up to 16)

VAC 2006 CONTROLLER AND VAR

2006 ROUTER

In a system which includes 6 controller VAC 2006, each one connected to a maximum of 6 routers VAR 2006, it is possible to obtain up to 216 double line output zones.

I/O CONTACTS

FIRE UNIT

MBT 1106

MBT 1112

(up to 16)

VAC 2006

CONTROLLER

MICROPHONE

VAIE 2250 VOICE ALARM INTEGRATED EQUIPMENT ALRM FAULT DIS.

SYS. BATT.

ON

RESET

EMERGENCY

ALRT

EVAC.

1 2 3 4 5 6

MENU

ESC

OK

TO PC

EXT.

CAT5 SFTP

Z.1

Z.6

LINE A

LINE B

LINE A

LINE B

Z.7

LINE A

LINE B

ON dB -40 -10 -6 -3

ON

GND

SPK

AMP.

OVL

HOT POWER

OFF

DPU 1500C Digital Power Unit

DPU 1500C

BACKUP 100V

ON dB -40 -10 -6 -3

ON

GND

SPK

AMP.

OVL

HOT POWER

OFF

Digital Power Unit DPU 1125C

ON

DPU 1125C

LINE A

LINE B

ON dB -40 dB

ON

GND

-10

SPK

-6

AMP.

-3

OVL

HOT POWER

OFF

DPU 1250C

Digital Power Unit

DPU 1250C

LINE A

LINE B

BACKUP

100V

VAIE 2250

MICROPHONE

VAIE 2250 VOICE ALARM INTEGRATED EQUIPMENT ALRM FAULT DIS.

SYS. BATT.

ON

EMERGENCY RESET

ALRT

EVAC.

1 2 3 4 5 6

MENU

ESC

OK

TO PC

EXT.

dB -40 -10 -6 -3

ON

GND

SPK

AMP.

OVL

HOT

ON

POWER

OFF

DPU 1500C

Digital Power Unit

DPU 1500C

Z.8

Z.9

24VDC OUT

TO ALL

SECONDARY PSU IN

LINE A

LINE B

ON dB -40 -10 -6 -3

ON

GND

SPK

AMP.

OVL

HOT POWER

OFF

DPU 1125C

ON

Digital Power Unit

DPU 1125C

LINE A

LINE B

ON dB dB

-40 -10 -6 -3

ON

GND

SPK

AMP.

OVL

HOT POWER

OFF

DPU 1250C

Digital Power Unit

DPU 1250C

BACKUP

100V

dB dB

-40 -10 -6 -3

ON

GND

SPK

AMP.

OVL

HOT

ON

POWER

OFF

DPU 1250C

Digital Power Unit

DPU 1250C

VAC 2006

CONTROLLER

MICROPHONE

VAIE 2250 VOICE ALARM INTEGRATED EQUIPMENT ALRM FAULT DIS.

SYS. BATT.

ON

EMERGENCY

ALRT

RESET

EVAC.

1 2 3 4 5 6

MENU

ESC

OK

TO PC

EXT.

LINE A

LINE B

Z.10

LINE A

LINE B

Z.15

COM.-SYS

VAR 2006

CTRL.IN

MAINS

BATTERY

FAULTS

GND

SP.Z1-3

SP.Z4-6

MUS.-SPARE

VOICE ALARM ROUTER

ALARM

CTRL.IN

DISABLE

STATUS

FAULT

ZONE OUTPUT

MSG.

LINE A

LINE B

PROGRAM INSERTION

VAR 2006

ROUTER

EMERG.

CALL

ON

BATT.

500 W

MPA 5480 BOOSTER 1

PMD Series Digital power unit VOICE

500 W

MPA 5480 BOOSTER 2

PMD Series Digital power unit VOICE

500 W

MPA 5480 BOOSTER 3

MUSIC/SPARE

SON 24V 6A MS40

BATTERY CHARGER

VAC 2006

CONTROLLER

EN 54 - 16

Code 37713

The controller VAC 2006 is the heart of VAIE 2250 evacuation system; it has been designed to drive all the supervising functions of the entire system, in compliance with the current safety standard for voice evacuation systems. It also manage and controls all the audio signals (evacuation, alert and standard messages and background music).

Feature:

• Controlled emergency microphone on the front panel

• 2-channel broadcast system

• Built-in message generator to broadcast prerecorded messages (EVAC and ALERT)

• USB input for background music source

• RJ45 CAT5 connections for:

- 6 control lines for PMD digital amplifi ers and/or router

VAR 2006 and/or integrated voice evacuation system

VAIE 2250

- 4 redundant lines to connect other VAC 2006 in daisy chain

(max 6)

- 2 redundant lines for emergency microphone consoles, FMD 2001 range

(max 7)

• 2 lines for call stations FMD range (max 16 with 7 priority levels)

• Back-up power amplifi er management

• Secondary emergency power supply input (24 VDC)

• 7 controlled input contacts

• 3 relay outputs

• Graphic display 128x64 pixel monochrome, for displaying multiple windows management

• Complete diagnostic of system fault events

• Standard rack mounting 19” (2 units)

Z.1

(125W)

Z.2

(375W)

MBT 1106

MBT 1112

(up to 16) dB -40 -10 -6 -3 0 dB

ON

GND

SPK

AMP.

OVL

HOT POWER

OFF

DPU 1250C

Digital Power Unit

DPU 1250C

LINE B

(up to 7)

24VDC OUT

TO ALL

SECONDARY PSU IN

SON 24V 6A MS40

BATTERY CHARGER

A

ON dB -40 -10 -6 -3 0

ON

GND

SPK

AMP.

OVL

HOT POWER

OFF

DPU 1500C

Digital Power Unit

DPU 1500C

BACKUP

100 V

B

ON dB -40 -10 -6 -3 0

ON

GND

SPK

AMP.

OVL

HOT POWER

OFF

DPU 1500C Digital Power Unit

DPU 1500C

Z.6

(500W)

9

VAR 2006

ROUTER

EN 54 - 16

Code 37712

The router VAR 2006 is the best solution for the sound systems with a very interesting compromise between price and performance; connected to a VAIE

2250 control line, it can drive up to 6 zones with external power amplifi ers (MPA5000 range) to a maximum of 1000 W.

Each output line consists of 2 speaker circuits (A & B) in order to guarantee the complete area coverage also in case of one loudspeaker circuit failure. The maximum system confi guration includes 6 controllers connected to 36 routers (6 for each VAIE

2250) for a total of 216 zones.

The router can be used with power signals (amplifi er 100 V output).

Two different confi gurations are possible: in the fi rst one you can connect 2 amplifi ers (one for music and one for speech); in the second confi guration it is possible to manage 2 voice amplifi ers (3 zones each) and one music amplifi er. In any case all connected amplifi ers are constantly monitored and the music one can be also used as backup: in case of a failure it automatically replaces the voice amplifi er.

• 6 loudspeakers zones with double output lines A+B

• Double input 100 V for 1 or 2 voice amplifi ers (IN 1 zone 1÷3,

IN 2 zone 4÷6)

• Front panel push button to switch on/off the music on each single zone

• RJ45 socket for VAIE 2250 connection

• 7 controlled input contacts

• 6 open collector outputs

• 2 relay outputs

10

Z.6

Z.4

Z.3

Z.1

LINE A

LINE B

LINE A

LINE B

LINE A

LINE B

LINE A

LINE B

VAR 2006

ROUTER N°1

1

VAR 2006

COM.-SYS

CTRL.IN

MAINS

BATTERY

FAULTS

GND

SP.Z1-3

SP.Z4-6

MUS.-SPARE

VOICE ALARM ROUTER

ALARM

CTRL.IN

DISABLE

FAULT

STATUS

1 2 3 4 5

ZONE OUTPUT

6

MSG.

LINE A

LINE B

1 2 3 4 5 6

PROGRAM INSERTION

EMERG.

CALL

ON

BATT.

6

MBT 1106

MBT 1112

(up to 16)

FMD 2001

FMD 2012

(up to 7)

VAC 2006

CONTROLLER

MICROPHONE

VAIE 2250 VOICE ALARM INTEGRATED EQUIPMENT ALRM FAULT DIS.

SYS. BATT.

ON

RESET

EMERGENCY

ALRT

EVAC.

MENU

OK

TO PC

EXT.

ESC

1 2 3 4 5 6

1 6

CAT5 SFTP

I/O CONTACTS

FIRE UNIT

MPA 5480 BOOSTER 1

PMD Series Digital power unit VOICE

500 W

VAR 2006

ROUTER N°6

VAR 2006

COM.-SYS

CTRL.IN

MAINS

BATTERY

FAULTS

GND

SP.Z1-3

SP.Z4-6

MUS.-SPARE

VOICE ALARM ROUTER

STATUS

ALARM

CTRL.IN

DISABLE

FAULT

1 2 3 4 5 6

MSG.

LINE A

LINE B

ZONE OUTPUT

1 2 3 4 5 6

PROGRAM INSERTION

EMERG.

CALL

ON

BATT.

ROUTER AND MPA 5000 AMPLIFIERS

TO MANAGE ZONE 30÷36

MPA 5480 BOOSTER 2

PMD Series Digital power unit VOICE

500 W

MPA 5480 BOOSTER 3

MUSIC/SPARE

500 W

24VDC OUT

TO ALL

SECONDARY PSU IN

SON 24V 6A MS40

BATTERY CHARGER

EN 54 - 16

DPU RANGE

CLASS D MODULAR AMPLIFIERS

MPA 5240/5480

MAIN FRAME

EN 54 - 16

Careful design and a choice of reliable high-tech components led to the creation of this range of extremely compact Class D amplifi ers, capable of functioning even in the toughest conditions and with a minimum energy consumption.

They include a diagnostics board which permits easy and rapid test of the correct unit operation and the check of the loudspeaker’s line integrity. The double output circuit with a separate control (A and B) allows realizations of redundant line plants. In case of short circuit on one of the two output lines, the damaged line will automatically be disconnected to allow the regular working of the other one.

The CHA 1004 (Code

37711)

power card-cage enables amplifi er units to be installed in a standard

19” rack. On each cage can be installed up to 4 amplifi ers DPU

1125 C and/or DPU 1250 C or up to

2 amplifi ers DPU 1500 C.

The DPU amplifi ers have been designed to be used with the

VAIE 2250 system; they can allow to develop high power zones when they are connected to the controller VAC 2006 through a shielded cable CAT5 SFTP.

A maximum of 16 DPU units can be connected to each of the six

VAC 2006 output lines (zones); a backup amplifi er for each group can be set.

The independent power supply of each amplifi er makes this system really reliable and fully in compliance with safety standards.

Code

DPU 1125 C

37724

Rated output power

@230 VAC

125 W RMS

DPU 1250 C

37725

250 W RMS

DPU 1500 C

37726

500 W RMS

Power outputs 100 V 100 V 100 V

Distorsion at rated power

< 1%

Input

Double RJ45, In/Out audio/RS485 from

VAC 2006

Frequency response

Low Cut fi lter

(- 3 dB)

Mains power supply

80-20.000 Hz

330 Hz

230 Vac ± 10% -

50/60 Hz / 24 Vdc

Power consumption

230 Vac

Power consumption 24

Vdc

200 W (240 VA)

4.6 A

< 1% < 1%

Double RJ45, In/Out audio/RS485 from

VAC 2006

Double RJ45, In/Out audio/RS485 from

VAC 2006

80-20.000 Hz

330 Hz

230 Vac ± 10% -

50/60 Hz / 24 Vdc

400 W (480 VA)

9 A

80-20.000 Hz

330 Hz

230 Vac ± 10% -

50/60 Hz / 24 Vdc

800 W (960 VA)

17 A

19” rack mounting

PMS2001 optional basket unit (H: 3U

+ 1U for support brackets)

PMS2001 optional basket unit (H: 3U

+ 1U for support brackets)

PMS2001 optional basket unit (H: 3U

+ 1U for support brackets)

Installable quantity for each CHA 1004 4

Dimensions

(W x H x D)

Weight

100x130x395 mm

6 kg

4

100x130x395 mm

9 kg

2

200x130x395 mm

18 kg

Code

Rated output power

@230 VAC

MPA 5240

37489

240 W RMS

MPA 5480

37491

480 W RMS

Power outputs 100-70-50 V, 8

Distorsion at rated power < 1%

Input

Frequency response

Balanced line input, XLR

30-20.000 Hz

100-70-50 V, 8

< 1%

Balanced line input, XLR

30-20.000 Hz

Mains power supply

230/115 Vac ± 10% - 50/60

Hz / 24 Vdc

230/115 Vac ± 10% - 50/60

Hz / 24 Vdc

Power consumption

230 Vac

Power consumption

24 Vdc

535 W (610 VA)

13.2 A

1160 W (1330 VA)

33 A

19” rack mounting

RMK 5000 optional brackets

(H: 2U ) with AC50 lateral support

RMK 5000 optional brackets

(H: 2U ) with AC50 lateral support

Dimensions (W x H x D) 432x88x272 mm

Weight 10.5 kg

432x88x360 mm

16 kg

Thanks to the great reliability of the protection circuits used, combined with an attractive appearance and the very tough structures, the MPA range constitutes the ideal product for quality amplifi cation, with a particularly interesting price/performance ratio.

If this amplifi er is used in emergency systems, it is possible to disable all the front-panel controls (tone and volume controls). In this way it is possible to avoid any accidental modifi cation of the preset levels

(NORM/DIRECT switch).

11

EN 54 - 16

VAIE 2250

VOICE ALARM INTEGRATED EQUIPMENT

On premises where large numbers of people are present it is essential to provide a suitable sound-broadcasting system that, following activation by the fi refi ghting control unit, will handle the emergency situation and enable guided and controlled evacuation of the building.

Current standards defi ne in detail the features of an electroacoustic system for evacuation and emergency purposes in terms of design and installation so that it will meet the applicable safety and reliability requisites.

The VAIE 2250 sound-broadcasting system is FBT’s current answer to the needs specifi ed in standards.

• Complete diagnostic of system fault events

• Control and monitoring of the integrity of the ‘critical path’

(audio signal starting from the capsule of the emergency microphone and/or from the message generator to the loudspeaker line, through the amplifi cation chain)

• Continuous loudspeaker line monitoring (integrity and dispersion to earth) without interruption of BGM or paging calls

• Simultaneous broadcasting of the EVACUATION and ALERT message to different areas

• Supervision of the link with the fi re-fi ghting system

• Back-up power amplifi er management (built-in)

• Management of a secondary source of 24 VDC power with a battery-charging unit

It can be possible to connect easily (by simple CAT 5 cable) two main VAIE 2250 to create systems of up to 12 zones, for a maximum of 1000 W and connect up to 14 emergency microphone units (thanks to the FMD 2011 and

FMD 2012 console units). Another important aspect is the possibility to manage different input audio sources like microphones, paging units and music source devices.

12

Code

Power supply

Max consumption @ rated output power RMS

Typical consumption with voice signal

Consumption with no signal

(test tone only)

Secondary power supply

Max consumption

@24 Vdc (@28 Vdc)

Typical consumption with voice signal

@24 Vdc (@28 Vdc)

Consumption with no signal

(test tone only)

Operating environmental conditions

VAIE 2250

37484

230 Vca 50/60 Hz

(500 W System) P = 650 W/800 VA

(250 W System) P = 370 W/480 VA

(500 W System) P = 160 W/200 VA

(250 W System) P = 90 W/120 VA

P = 30 W/45 VA

24 VCC (min 22 Vdc ÷ max 28 Vdc)

500 W System = 17 A (21 A)

250 W System = 9 A (11 A)

500 W System = 4,3 A (5 A)

250 W System = 2,2 A (2,5 A)

0,8 A

Mounting

Dimensions (W x H x D)

Weight

Temperature: +5° C to +40° C Relative humidity: 25%-75% non-condensing

Optional AC8506 brackets for mounting in 19” rack (height: 3 U + 1 U support brackets)

439x387x132 mm

20,5 Kg

VAIE 2250

VOICE ALARM INTEGRATED EQUIPMENT

MAIN SYSTEM FEATURES MAIN EMERGENCY FEATURES

• 2-channel broadcast system

• Up to 12 broadcasting zones

• Music volume control for each zone

• 1000 W maximum total power

VAIE 2250 technical features

• Two built-in 250 W RMS class D power amplifi ers

• External 250 W amplifi er to increase power (MPA 5240)

• Up to 7 remote emergency microphone units (SFTP CAT5 cable)

• Up to 16 paging units, 7 priority levels (SFTP CAT5 cable)

• Balanced microphone input (IN

1) with Phantom power supply and priority contact

• Balanced microphone or line input (IN 2) with Phantom power supply (MIC), priority contact or automatic precedence (VOX)

• Balanced line input (IN 3) with automatic precedence (VOX)

• Auxiliary line input for an external music source

• USB input for background music source

• 6 open collector outputs

(system status or override to by-pass attenuators)

• 8 programmable and controlled input contacts

• 2 relay outputs for ‘emergency’ and ‘failure’ conditions

• Built-in loudspeaker for channel monitoring and acoustic failure signalling (beep)

• Easy and simple confi guration

(large LCD display)

• Emergency zone disabling and

Do Not Disturb functions (DND)

• Frontal Fireman’s microphone

• Remote emergency microphones units

• Control and monitoring of the integrity of the critical path

(from the emergency signal sources to the loudspeaker lines)

• Continuous loudspeaker line monitoring without interruption of BGM or paging calls

• Two output loudspeaker lines for each zone (A & B)

• Built-in message generator unit alarms

• Back-up power amplifi er management (built-in unit)

• Complete diagnostic of system fault events

VAIE 2250 Voice Alarm

Integrated Equipment

The Fireman Microphone Desktop

FMD 2012 and FMD 2001 are fully diagnosed, and allow greater operational and management fl exibility for any service and/ or emergency calls and/or prerecorded messages on the zones of the system.

The LEDs on the front panel provide the main information on the status of the emergency system and on any failures. The

FMD 2001 Fireman station enables a single All-Call to be made; if the alarm messages have to be sent to separate zones, it will be necessary to use the FMD 2012

Fireman station, which enables a maximum of 12 zones to be selected.

Each station must be completed with an additional microphone to be chosen from among the following models: FMG 2000

(dynamic gooseneck microphone) or FMH 2000 (dynamic hand-held microphone with P.T.T. key)

SOLUTION WITH A MIXED

CONFIGURATION

MBT 1106

MBT 1112

(up to 16)

MBT 1106

MBT 1112

(up to 16)

I/O CONTACTS

FIRE UNIT

VAIE 2250 n.1

MICROPHONE

VAIE 2250 VOICE ALARM INTEGRATED EQUIPMENT ALRM FAULT DIS.

SYS. BATT.

ON

RESET

EMERGENCY

ALRT

EVAC.

1 2 3 4 5 6

MENU

ESC

OK

TO PC

EXT.

REMOTE LINK

CAT5 SFTP

LINE A

LINE B

LINE A

LINE B

Z.1

Z.6

24VDC OUT

TO ALL

SECONDARY PSU IN

VAIE 2250 n.2

MICROPHONE

VAIE 2250 VOICE ALARM INTEGRATED EQUIPMENT ALRM FAULT DIS.

SYS. BATT.

ON

RESET

EMERGENCY

ALRT

EVAC.

1 2 3 4 5 6

MENU

ESC

OK

TO PC

EXT.

LINE A

LINE B

LINE A

LINE B

Z.7

Z.12

SON 24V 6A MS40

BATTERY CHARGER

MPA 5240

EN 54-16 BOOSTER (OPTIONAL)

MPA 5240

EN 54-16 BOOSTER (OPTIONAL)

SON24V 6A MS40

EN 54 - 4

Battery Charger

Code 37751

The battery charger SON24V 6A MS40 (24 Vdc) is intended for a Voice

Evacuation System. The battery chargers are microprocessor based devices that have been designed to charge lead-acid batteries

(backup batteries connected to the Voice Evacuation System) and, simultaneously, to provide power to auxiliary applications.

The battery charger, which is fully compliant with EN54-4 (certifi cate n. 0333-CPD-075382), offers a maximum charge current of 6 A.

It is two rack units (2 U) high, and has to be installed in a 19” rack.

13

FMD 2001

EN 54 - 16

FMD 2012

EMERGENCY PAGING UNITS

EN 54 - 16

• Fully diagnosed

• Emergency key

• Live emergency calls

• Sending of pre-recorded Evacuation/Alert messages

• Broadcast calls

• Zone-selection keys with status-LEDs (FMD 2012 only)

• Faults/Failures LEDs

• AUX function to call pre-set messages

• Reset of emergency messages

• Muting of the buzzer for failure detection (ACK)

The remote consoles FMD 2012 and FMD 2001 are fully diagnosed, and allow greater operational and management fl exibility for any service and/or emergency calls and/or prerecorded messages on the zones of the system. The LEDs on the front panel provide the main information on the status of the emergency system and on any failures.

The FMD 2001 station enables a single All-Call to be made; if the alarm messages have to be sent to separate zones, on the other hand, it will be necessary to use the FMD 2012 station, which enables a maximum of 12 zones to be selected.

Each station must be completed with an additional microphone to be chosen from among the following models:

• FMG 2000 Dynamic gooseneck microphone

• FMH 2000 Dynamic hand-held microphone with P.T.T. key

According to the used system units, it is possible to set-up the

PTT and AUX keys and, only for the FMD 2012, each of the 12 selection keys in order to enable selection of groups of zones (keys

1 to 12 and the PTT key) or to create a specifi c combination of messages for the different zones

(AUX key).

It is possible to connect up to 7 remote station units in cascade formation by means of the IN/OUT sockets provided for this purpose, which can be used as inputs or outputs as required. The connections to the units are made by means of CAT5e SF/UTP shielded cable and a shielded STP connector.

14

200

200

FMG 2000

EN 54 - 16

FMH 2000

EN 54 - 16

MBT

Dynamic gooseneck microphone

Code 37488

Dynamic hand-held microphone

Code 37487

Broadcasting paging units

Standard paging units can be used in the

Voice Evacuation Systems.

Code

N° of zone selectable

Typical output level

Frequency response

Distortion

LOW CUT fi lter

S/N ratio

Connections

Power supply voltage

FMD 2001

-

37485

300 mV

130 ÷ 19.000 Hz

< 1%

-3 dB / 380 Hz

> 60 dB

RJ45 (IN/OUT)

24 Vdc

Maximum absorption

@24Vdc

60 mA

Dimensions (W x H x D) 140 x 80 x 200 mm

Net weight 0,77 kg

FMD 2012

37486

12

300 mV

130 ÷ 19.000 Hz

< 1%

-3 dB / 380 Hz

> 60 dB

RJ45 (IN/OUT)

24 Vdc

130 mA

230 x 80 x 200 m

1,55 Kg

MAD 4IP

HIGH QUALITY

AUDIO

15

16

Have you ever wondered if it could be possible to control music as well as lights, blinds, security system and even temperature from across the room?

And what do you think about possibility to get full control from across the globe?

The future is now: you can start with a simple touch!

FBT Elettronica with Audio Contractor Division takes a big step forward, introducing a brand new system, designed to provide comfort as well as more convenience than you ever thought possible.

Customized to fi t the specifi c lifestyle, these solutions range from Multi-Room Music System to full whole Building Automation. If you’re moving around your room or around the globe, the system is just as easy to use as you can get a complete control of everything in your hands.

MAD 4IP - Multimedia Automation Distribution over IP Networks

MMU4000 CUW4000 CUD4000 EAC4000

MAD 4IP will catalog your entire collection and you can add music to every room with the touch of your fi nger: you can play the same song in every room or different songs in different rooms, the choice is yours.

MAD 4IP will give you instant access to the world of music, no matter where it comes from: MP3 or Tuner or Internet Radio from your computer or your MP3 player or your SD card or your USB memory key.

Multi-Room Multi-Source application - combination of streaming of Digital Music with

Building Automation

For instance lighting and music control can be integrated in scenes, which can be selected at the push of a button from anywhere in the building. Audio streams are transmitted over

IP networks or wireless networks, from a main server to music players and in turn controlled with a web based visualization. Thanks to the Graphical User Interfaces in a web page, you can control all room functions completely intuitively with a touch screen: lighting scenario, automatic lowering of blinds, music in every room, door communication, heating, ventilation and air-conditioning systems and even irrigation.

With a customized control of the building it’s possible an intelligent management of all these functions, assuring time and energy saving.

Your smartphone or tablet will be converted into your universal remote control.

18

MMU4000

Multimedia MASTER UNIT cod. 34553

• Reduced dimensions

(WxHxD) 360 x 88 x 216 mm

• 1 serial interfaces RS 232

• 6 usb 2.0 ports

• Ethernet

• Temperature Range 0-50

0

• Power supply 230V

• Consumption 45W

• Stand alone or rack mounting with included brackets

• Automatic start up in case of power failure

• 2 Audio line-in

• 2 audio Mic/line in with gain, and tone control

(Low and High)

• 48V phantom for microphone input with switch) reproduces and manages audio fi les in the most popular formats Mp3 and WAV from hard disk

–all in streaming on standard IP network, using the RTP protocol, Real Time Protocol, controlled by a web based supervision software, from touch-screens or from management devices distributed over the various areas.

MMU4000 can be integrated into the building automation installation to offer high quality music in any room. It can be upgraded with

3 different software license, adding also the complete integration of Music streaming with

Building Automation System.

MMU4000 is the Multimedia Master Unit, a complete Multi-Room Music System, integrating music/video source components and user interfaces, providing you with one-touch entertainment throughout the building.

MMU4000 is the simple, economic solution for distributing music and video in streaming.

It’s a totally modular system, confi gurable via software, versatile and easy to use.

MMU4000 is a compact, independent unit that

OPTIONAL SOFTWARE LICENSE for

M MU4000

BAL (Building Automation Light)

With this software license option, the Multi-

Room Music System is combined with a

Building Automation System, with a standard web Interface, 2 simultaneous users, 2 selectable skins, 2 scenarios, 8 control points with MODBUS protocol, 2 confi gurable environments.

BA1 (Building Automation 1 Driver)

With this software license the Multi-Room Music

System is combined with a Building Automation

System, with a standard web Interface, 1 driver included and chosen among several protocols,

150 control points.

BA3 (Building Automation 3 Driver)

With this software license the Multi-Room Music

System is combined with a Building Automation

System, with a standard web Interface, 3 drivers included and chosen among several protocols, 300 control points, 3 simultaneous users, no limit to confi gurable environments and elements for environment, IP security cameras visualization, selectable skins.

CUW4000

Control Unit wall mounted cod. 34555

EAC4000

Ethernet Audio Card

Cod. 34556

CUW4000 Control Unit is a fully confi gurable,

7” touch panel featuring a contemporary, thin elegant design that complements the aesthetics of any environment. The CUW4000 has a

800x480 resolution and incorporates 48VPoE -

Power over Ethernet, allowing the touch panel to receive its power via the Ethernet connector.

CUW4000 can receive audio input signals over standard CAT 5 cable. It’s equipped also with an additional jack input for external players and with an USB port for an external USB key for MP3 fi le local reproduction This enhanced connectivity provides integration fl exibility

One or more touch panels can be installed, depending on your own needs or to make the management of the building automation system available from different areas.

EAC4000 is the complete audio Ethernet card.

It’s used to stream the audio signals into the IP network, to be used when it’s not necessary a display, because it’s used a PC or a smartphone.

It has the same features of CUW4000, without

LCD display.

• Dimensions:

225 x 105 x 30 mm

• Power Supply : 3W

OPTIONAL:

• External Power Supply 12V 1A for CUW4000,

CUD4000 and EAC4000, when PoE is not available.

CUD4000

Control Unit Desktop

Cod. 34554

It’s equipped with:

• 1 USB for pen drive

• 1 Lan port (with 48V POE)

• 1 Stereo lIne-in

• 2 balanced audio out

• Power supply connector : 12V

• Power : 6.5W on and 3W standby

FEATURES

• 7-inch color LCD touch panel Full-color video monitor/in-wall

• 16:9 aspect ratio Controls

• Non-volatile fl ash memory

Connections

• System Port (RJ-45)

• Wiring Requirements Cat-5 (data),

• Display 7” Diagonal, 16:9 Color TFT LCD

Resolution 800 (W) x 480 (H)

• Frame Dimensions (WxHxD) 280 x 175 x 6 mm

• Cutout Dimensions Approx. 265 x 170 x 72mm

CUD 4000 has the same features of CUW

4000 but sits on a tabletop and it’s equipped with a gooseneck microphone for paging announcements.

• Dimensions: 320x 172 x 57 mm

19

M MU4000 Rear Panel:

• 1 serial interfaces RS 232

• 4 USB 2.0 ports + 2 USB 2.0 ports on front

• Ethernet port

• 2 Audio line-in

• 2 audio Mic/line in with gain and tone control

• 48V phantom for microphone input

20 smartphone tablet CUW4000 CUD4000 EAC4000 PC

MMU4000 audio lighting shutter/blind heating ventilation

KEY FEATURES:

• Web based application : you can use any device with an Internet Browser on board, so you can get full control from your PC, as well as from any smartphone or any tablet PC, that could be converted into your universal remote control. No need to install any software or to download any applet, with no compromise features and with reaction to commands in real time.

• Independent from BUS: you can have

3 different drivers selectable among the following: KNX, Modbus TCP, Modbus RTU,

IP Camera and many others

• 3 simultaneous web user

• Unlimited number of scenarios

• Simultaneous management of 300 control points

• Selectable graphic skins

• MAD4IP MAP management of the entire building automation system through images of the ambient: it’ll be possible to have layout or images of the rooms and to manage the controls through icons, directly in the visualized ambient. With this module MAD4IP

MAP it will be possible also to look at IP camera video, in real time, keeping under control the security of all the environments.

CONFERENCE SYSTEMS

AND INTERCOM SYSTEMS

Sound Design Project for Council Chamber - Pescara

21

FBT AC CS 1CU

CONTROL UNIT

FBT AC CS 1DU FBT AC CS 1CH

MICROPHONE CONSOLES

The innovative design makes the

CS series more than just another conference system. With its ECM capsule, intelligent automatic mixing technology and integrated acoustic and mechanical system, the conference system provides turnkey solution with natural, feedback-free audio performance whatever the environment. This conference system is ideal for conferences up to 150 attendees.

The system is composed of 1 central unit and up to a maximum of 150 chairman or delegate console.

Control unit

Code 27510

• Controls the chairman and delegate microphones as well as the connections to other audio inputs and outputs

• Self-powered

Delegate microphone base

Code 27512

Provides the facility for the user to take part in the conference via the gooseneck microphone, a PTT

ON/OFF switch is provided as is an internal loudspeaker and an external earphone socket

• Flexible condenser microphone

• Diameter without microphone

170x115x90mm

• Microphone length 400mm

• Net weight 1100g

Chairman microphone base

Code 27511

It has the same features of the CS

DU model, but with the following difference:

• A priority switch allowing the chairman to control the conference by muting temporarily or completely clearing all active delegate microphone units

CS1-CH CS1-CU

22

FBT AC D7P

Cables

Model Code Dimensions

FBT AC D7P-10 37648 10 mt

FBT AC D7P-20 37649 20 mt

FBT AC D7PDH-1 37650

Voltage

DC supply to contribution units

Input sensitivity

Input impedance

Output level

Output impedance

Input sensitivity

Input impedance

Adjustment

Output level

Output impedance

Input sensitivity

Adjustment

Power supply Phantom

Output level

Allowed Impedance

Type

Frequency Response

Polar Pattern

Max. SPL for 1% THD

Gooseneck Length

Dimensions (WxHxD)

Dimensions

Weight

CONFERENCE SYSTEM CS SERIES

Vac 100 ~ 264, 50/60Hz

±15V ±1V

Line, Telephone and Insertion-unbalanced

-14dBV/+11dBV (nominal/maximum)

33Kohm

14dBV/+11dBV (nominal/maximum)

500ohm

Tape Recorder-unbalanced

-20dBV/+5dBV (nominal/maximum)

47Kohm (for L & R channel)

-20dBV/+5dbBV

+0/-30dB

500ohm

External Microphone input-balanced

-56dBV

+6dBV/-6dB

12V±1V, 2*680ohm (±2%)

Headphone Output

-8dBV/+2dBV

22ohm

Gooseneck Microphone

Back Electret Condenser

50 ÷ 18000Hz

Cardioid

125dB

400mm (15”)

CS-1CU CS-1CH e CS-1DU

300x89x150mm 115x60x173mm

- 400mm (15”)

1745gr 1100gr

300

173

115

FBT AC EXM-1

EXPANSION KIT

FBT AC EXS-1

FBT AC expansion kit, combined with D7PDM-1 extension cables, can expand the number of using units of conference discussion system from 50 to 150 by adding maximum two additional FBTAC

CS-1CU functioning as power supply units only. The system is controlled by the master FBTAC

CS-1CU unit.

Using D7P-10 or D7P-20 extension cables to extend the operation distance.

Code

Input

Output

Dimension(mm)

FBT AC EXM -1

37646

7-pin DIN Connector

7-pin DIN Connector

115x65mmx38mm

FBT AC EXS-1

37647

CS-1CU(Master)

D7PDM-1

X 25

CS-1CH/DU

CS-1 EXM

Expansion Kit Master

TO: CS-1CU (Master) TO: CS-1 CH/DU TO: CS-1 EXS

CS-1EXM

D7PDM-1

X 25

CS-1CU(Slave)

X 25

X 25

CS-1CU(Slave)

CS-1CH/DU

CS-1 EXS

Expansion Kit Slave

D7PDM-1

TO: CS-1CU (Slave) TO: CS-1 CH/DU TO: CS-1 EXM

CS-1EXS

D7P-10

D7P-20

X 25

CS-1CH/DU

D7PDM-1

CS-1 EXS

Expansion Kit Slave

TO: CS-1CU (Slave) TO: CS-1 CH/DU TO: CS-1 EXM

CS-1EXS

X 25

23

INTERCOM 1300

MICROPHONE INTERCOM SYSTEM

Installed in different rooms the intercom system allows users to speak and listen at each end without having to press any buttons. The kit is composed of three separate modules: control station, power supply, and loudspeaker unit with integral microphone.

The devices function in halfduplex (one-at-a-time) mode and activation thresholds are modifi ed automatically in relation to environmental background noise levels. The operator station can enable one-way operation, i.e. exclusively automatic listening, with speak facility at the press of a button.

Intercom 1300 composed of:

• SIBK 013 control station,

• AASL 012 power supply,

• SICK 012 loudspeakermicrophone enclosure with connection cable

Optional:

• SICK 013 supplementary loudspeaker for operator station

• headset with microphone

for operator station

24

Code

Power supply

Power input

Power input

External loudspeaker impedance

Bases dimensions

Flex cable and microphone length

External loudspeaker dimensions

INTERCOM 1300

18083

220 Vac, 50 Hz

16VA

1W

8ohm

220x157x55mm

358mm

110x64x54mm (bracket excluded)

MICROPHONES

MICROPHONE BASES

WIRELESS MICROPHONES

Sound Design Project for reception hall and conference centre

(Villa Foscarini-Cornaro - Gorgo al Monticano, TV

• Settings:

4 reception rooms (approx. 200 m2)

4 rooms (approx. 25 m2)

1 outdoor arcade

• Requirements:

Sound amplifi cation system designed for conferences, banquets and receptions 9 independent zones, 3 of which are main

• Preamplifi er equipment:

3 MMZ8004 mixers featuring 4 output buses

1 MZU2008 zone selector

• Power amplifi ers:

2 MCA4240A multi-channel power amp.

• Loudspeakers:

42 STUDIO4/WT loudspeakers, 2-way, 60 W RMS

and loudspeakers from the FBTMaxX range

• Microphone bases:

1 MBT8008 unit for announcements in individual zones and generating automatic alarm messages

• Wireless microphones:

4 WM-505 wireless microphones

25

MD-S 1100 MD-S 1300

HAND-HELD MICROPHONES

MD-F 5044

GOOSENECK MICROPHONES SKLKLAKMSK

Dynamic microphones cardioid

• ON-OFF switch

• Male XLR connector

• Anthracite grey body

• Black mesh and antipop fi lter

• High performance

• High-quality voice reproduction

• Low distortion

• High resistance to knocks

• Special cartridge suspension mount to isolate the microphone from handling noise

• Ideally suited for speech applications

Dynamic microphones percardioid

• ON-OFF switch

• Male XLR connector

• Anthracite grey body

• Black mesh and antipop fi lter

• High performance

• High-quality voice reproduction

• Low distortion

• High resistance to knocks

• Special cartridge suspension mount to isolate the microphone from handling noise

• Ideally suited for singing applications

Dynamic microphones cardioid with gooseneck

• Male XLR connector

• Low refl ectivity black fi nish

• Outstanding directional characteristics

• Ideal for:

- hotels

- shopping centres

- churches

- conferences

- offi ces

Electret microphone with gooseneck

• Male XLR connector

• Low refl ectivity black fi nish

• Outstanding directional characteristics

• Ideal for:

- auditoriums

- shopping centres

- conference halls

Code

Characteristics

Directivity

MD-S 1100

10040

Dynamic

Cardioid

Frequency Response 80Hz÷13 kHz

Sensitivity (OdB-1V/micro bar,1000 Hz) -75dB±3dB

Output impedance 500ohm

Material

Weight

Dimensions

Accessories included

Microphone cables (optional)

Zamak

220 g

ø 54x175mm

Stand SU30

CI-M 5 X

CI-M 5 D

CI-M 5 J

MD-S 1300

10042

Dynamic

Hiper-Cardioid

50Hz÷18 kHz

-72dB±3dB

250ohm

Zamak

359 g

ø 54x187mm

Stand SU30

CI-M 5 X

CI-M 5 D

CI-M 5 J

29 19

Code

Characteristics

Directivity

MD-F 5044

10045

Dynamic

Cardioid

Frequency Response 80Hz÷16 kHz

Sensitivity (OdB-1V/micro bar,1000 Hz) -68dB±3dB

Output impedance 500ohm

Power supply

Weight

Dimensions

Accessories included

-

215 g

ø 29x438mm

Stand SU30

MC-F 5042

10044

Electrete

Cardioid

80Hz÷16 kHz

-68dB±3dB

250ohm

Phantom 9:52 Vdc

135 g

ø 19x424mm

Stand SU30

MD-F 5045 S

GOOSENECK MICROPHONES SKLKLAKMSK

Dynamic microphones cardioid with gooseneck

• Push-to lock switch

• Male XLR connector

• Low refl ectivity black fi nish

• Outstanding directional characteristics

• Ideal for:

- hotels

- shopping centres

- churches

- offi ces

Dynamic microphones cardioid with gooseneck

• Same characteristics as the

MD-F 5045 S with push-to-talk switch

• Code: 15294

MS 30 BK

Floor stand

Code 18245

Adjustable fl oor stand

ASG 230

Boom arm

Code 11864

Boom arm for MS 30 BK microphone stand

TB 30 BK

Table microphone stand

Code

Characteristics

Material

Directivity

Frequency Response

Sensitivity

Output impedance

Weight

Dimensions

29

MD-F 5045 S

10046

MD-F 5045 SI

15294

Dynamic microphone Dynamic microphone

with push-to lock switch with push-to-talk switch

-

Cardioid

100Hz÷12 kHz

-

Cardioid

100Hz÷12 kHz

-77±3dB -77±3dB

(OdB-1V/micro bar, 1000 Hz) (OdB-1V/micro bar, 1000 Hz)

500ohm

315 g

ø 29x440mm

500ohm

315 g

ø 29x440mm

Code 18248

Adjustable table microphone stand

SU 30

Universal clamp-on

Code 11586

Universal hand-help microphone clamp-on

CM 601

CONDENSER MICROPHONE

Low profi le panoramic microphone, electret condenser

• On/off switch,

• The switch can be programmed for the push on/off, push/ to talk, push/to mute functions

• LED indicator

• Three-position low cut switch,

minimizing mechanical noise

• 3 pin Mini XLR-M output connector

• 36-52 VDC Phantom Power, 88 g net weight

• Specially suitable for conference tables, altars and stage fl oors

FBTAC GM 5206 L - 5212 L - 5218 L

CONDENSER MICROPHONE

Condenser microphone

• XLR connector

72

Code

Characteristics

Directivity

CM 601

27516

Electrete Condenser

Half-Cardioid

Frequency Response 30Hz÷12.000 Hz

Sensitivity (OdB-1V/micro bar,1000 Hz) -53dB±3dB

Low Frequency Roll-off

Output impedance

Max SPL

80Hz, 120Hz

100ohm

125dB at 1kHz

Signal to noise ratio

Power supply

Power consumption

Switches

Output connector

Weight

Dimensions

67dB

Phantom 36÷52 Vdc

6mA

Push control: on/off

Function selection: push on/off, momentary on, momentary off

Low cut: low frequency roll-off

3P Mini XRL-M type

88 g

72x110mm

Code

Characteristics

Directivity

FBTAC GM 5206L FBTAC GM 5212L FBTAC GM 5218L

27515 27514 27513

Electrete Condenser

Super Cardioid

Frequency Resp. 80Hz÷18.000 Hz

Sensitivity (1000 Hz) -60dB (1mV)

Output impedance 220ohm

Max SPL oer 1% THD

125dB

Phantom Power 36-52Vdc

Output connector XLR

Dimensions FBTAC GM5206L 152mm (6”)

FBTAC GM5212L 305mm (12”)

FBTAC GM5218L 457mm (18”)

FBTAC ST 5050

MICROPHONE BASES

Universal microphone base

• Both phantom power and 9V battery power supply

• On/off switch with possible push/ to talk, push/to mute

FBTAC ST 850

MICROPHONE BASES

Microphone base

It is automatically set to be wired or wireless, adding the transmitter and receiver

• On/off switch

• The base operates with power transmitters and it is compatible with FBTAC-PT-850B transmitters

• Where wireless transmitters not available, it will be enough to connect ST850 to a microphone cable with Phantom power supply: it will function as a standard fl exible microphone

100

Code

Frequency response

Stand-By power consumption

Operating power consumption

Switches

Connectors

Weight

Dimensions

FBTAC ST 5050

27499

20Hz÷20.000 Hz

1mA

2.07mA (BAL), 1.34mA (UNBAL)

Microphone selection: ECM MIC unbalanced input, ECM MIC balanced input, Dynamic MIC input

Unbalanced and balanced audio input (XRL 3P Female)

Unbalanced and balaced audio output (XRL 3P Male)

0,82 Kg

100x155mm

Code

Features

Frequency response

Directivity

Output level (at 1,000 Hz)

Impedance

Max SPL for 1% THD

Power supply

Power consumption

Output connector

Switches

Cable lenght

Weight

Dimensions (WxHxD)

150

FBTAC ST 850

27500

Back Electret Condenser

50Hz÷18.000 Hz

Supercadioid

Wireless -66±3dB (1.58mV) 0dB=1V/bar

Wired -56±3dB (1.58mV) 0dB=1V/µ bar

Wireless 2k Wired 100

125dB

Wireless 5VDC

Wired 12-48 VDC phantom power

Wireless 0.5mA Wired 05.5mA

Wireless 4P <mini XRL Wired 3P XRL (M)

Push control on/of

305mm

1 kg

100x65x150mm

MB-T 6400 S

DESK MICROPHONE BASE

Desk base with ON/OFF switch, fl exible gooseneck with cardioid dynamic microphone

• 5 metre cable with male XLR connector and 2 conductors for priority activation (ding-dong)

BF-T 5043 L

MICROPHONE BASES WITH GOOSENECK AND SWITCH

Desktop base with ON-OFF switch, gooseneck and cardioid electret condenser microphone

• Complete with a 5-metre cable fi tted with a male XLR connector and 2 wires for the activation of the chime

priority

• Die-cast zinc base

• Lamp ring

• Touch-switch

• Ideal for all applications, especially for

- churches

- conference halls

Code

Features

Directivity

Frequency response

Sensitivity (OdB-1V/micro bar,1000 Hz)

Output impedance

Material

Weight

Dimensions (WxHxD)

MB-T 6400 S

28840

Dynamic

Cardioid

100Hz÷12 kHz

-75dB±3dB

500ohm

Zamak

1750 g

160x98x45mm

160 145

Code

Features

Directivity

Frequency response

Sensitivity (OdB-1V/micro bar,1000 Hz)

Output impedance

Power supply

Material

Weight

Dimensions (WxHxD)

BF-T 5043 L

18322

Electrete

Cardioid

70Hz÷18 kHz

-59dB±3dB

250ohm

Phantom 12÷48 Vdc

Zamak

786 g

145x100x36mm

150 150

MB-T 8001 MB-T 8004

DESKTOP BASES

MB-T 8008

The microphone bases in the

MB-T 8000 series feature a plastic body with a metal base. These products stand out for their high sensitivity and wide frequency response and the microphones feature a cardioid polar curve.

The bases are equipped with a functional 3-position switch, ON push-to-lock, OFF and push-to talk ON as well as an emergency button.

• Pre-amplifi ed (output 0dBu)

• Dynamics compressor to ensure optimal level of clarity

• Internal message generator to indicate the start and end of microphone messages and for an emergency signal.

• Option to control priority (music off)

• Management of 4 or 8 zones independently, depending on the model, and general calls

• For the management of a larger number of zones, upon request

150

MB-T 8004

MB-T 8001 MB-T 8008

AL 8000

Power Supply

Code 17074

Power Supply +15/-15V for pre amplifi ed microphone bases of MB-T8000 series

STH 022

Multipair Shielded cable

Model Code Dimensions

STH 02-022 13360 2x2x0,22

STH 05-022 13103 5x2x0,22

STH 09-022 13104 9x2x0,22

Code

Features

Microphone

Polar curve

Frequency response

Sensitivity

Output impedance

Gooseneck

Warning/emergency

signals

Output voltage

Power supply

Material

Accessories included

Optional accessories

MB-T 8001

19543

Base with switch,

emergency button

MB-T 8004

11828

Base with switch,

4-zone selection,

emergency button

MB-T 8008

12122

Base with switch,

8-zone selection, emergency button

Electret

Cardioid

70Hz ÷ 18KHz

-63dB± 3dB

Electret

Cardioid

70Hz ÷ 18KHz

-63dB± 3dB

Electret

Cardioid

70Hz ÷ 18KHz

-63dB± 3dB

600ohm

L=370mm ø 9mm

600ohm

L=370mm ø 9mm

600ohm

L=370mm ø 9mm

CHIME:2Tones CHIME:2Tones CHIME:2Tones

CHIME:4Tones Emergency CHIME:4Tones Emergency CHIME:4Tones Emergency

0dBu (0,775Vrms) balanced 0dBu (0,775Vrms) balanced 0dBu (0,775Vrms balanced)

±15Vdc/80mA ±15Vdc/80mA ±15Vdc/100mA

Plastic with steel base

Antipop fi lter

Plastic with steel base

Antipop fi lter

Plastic with steel base

Antipop fi lter

Multipair Multipair Multipair

Shielded cable 5x2x0.22 Shielded cable 5x2x0.22 Shielded cable 9x2x0.22

STH05-022 STH05-022 STH09-022

31

MBT 1101

PRE-AMPLIFIED BASES

MBT 1106 MBT 1112

BROADCASTING PAGING UNITS

MBT 1112E

ABS structure with electret microphone and stem with a fl exible section at the bottom.

Equipped with one hold-down

(PTT) call key, one toggle (LOCK) call key for long messages and a LED signalling activation of the microphone. The bases can be mixed with one anther or interlocked with two priority levels. The level of the microphone signal and that of the alerting signal (chime generator included) are adjustable from the rear.

Standard paging units can be used in the Voice Evacuation Systems.

The units are connected to one another in cascade formation, and the connecting cables (CAT5e

SF/UTP) carry both the analogue audio signal and the digital signal for the controls and station addresses. MBT 1106 call station can make selective calls to up to a maximum number of 6 zones and the MBT 1112 up to 12.

The MBT 1106E extension module enables 12 programmable shortcut keys for one or more functions to be added. It is possible to connect up to two expansion modules to the MBT 1112.

MBT 1101 microphone stations can be used simply and rapidly with the amplifi ers of the MPA

5000, MXA 1000, MXA 3000 and

MDS 6000 range.

It is essential to use CAT5e SF/UTP shielded cables (IN input UNITS), and it is possible to connect up to

6 microphone stations in cascade fashion. The output level can be adjusted by means of the appropriate rear-panel control

(LEV).

200 200 200

CV 2010

Cable

Code 35541

32

Code

Type

N° of selectable zones

Power supply

Absorption @ 12 Vdc

Absorption @ 24 Vdc

Frequency response

Speech fi lter @100 Hz

Audio output level

Audio level adjustable

Warning signal level

(chime) adjustable

Dynamic limiter

Dimensions

Weight

MBT 1101

37739

-

Electret

12 Vcc / 24 Vcc

40 mA

50 mA

-

100 ÷ 15.000 Hz

-

1,2 Vrms (balanced)

0,8 Vpp yes

116x60x200 mm

0,82 Kg

-

MBT 1106

37492

Electret

6

18 Vcc / 36 Vcc

-

16 mA

100 ÷ 14.000 Hz

-10dB

-

2,2 Vmax yes

116x60x200 mm

0,58 Kg

-

MBT 1112

37493

Electret

12

18 Vcc / 36 Vcc

-

22 mA

100 ÷ 14.000 Hz

-10dB

-

2,2 Vmax yes

116x60x200 mm

0,60 Kg

-

-

-

-

-

MBT 1112E

37494

-

12

-

-

20 mA

-

116x60x200 mm

0,50 Kg

40 130

WM 505/...

WM 705 A/L

WIRELESS MICROPHONES

Design philosophy and technology aimed at guaranteeing optimal quality and reliability with high level performance. Receiver with SWITCHING DIVERSITY technology, to ensure signal selection at all times at the radio frequency with the best intensity, thereby ensuring top quality and reproduction stability in sound amplifi cation systems.

30 130

LM - 10

HM - 26

AVL 606

Lavalier microphones

Code 13544

Lavalier microphones have electrical and mechanical characteristics to guarantee reproduction of clear and intelligible speech for the entire system. The compact dimensions and weight ensure use in all cases where the utmost freedom of movement is indispensable.

Headset microphones

Code 13543

Headset microphones have electrical and mechanical characteristics to guarantee reproduction of clear and intelligible speech for the entire system. The compact dimensions and weight ensure use in all cases where the utmost freedom of movement is indispensable.

Microphone

Code 14142

As well as the characteristics of the other two models, this microphone features special sweatproof protection to enable use in all applications subject to high levels of humidity or perspiration. (Typical applications include gymnasiums, swimming pools, camp sites etc.).

Code

Transmitter type

Audio band

Microphone type

Directivity

Power RF

Power supply

Absorption

Duration

Weight

Operation

Antenna

Power supply

Squelch

Audio Output

Weight

WM 505/...

11573 175 Mhz

11574 214 Mhz

14922 204 Mhz

14923 212 Mhz

WM 705 A/L

14827 181 Mhz

14828 203 Mhz

14924 203 Mhz

Hand-held

50 Hz-15 Khz

Dynamic

Cardioid

Lavalier and Headset

50 Hz-15 Khz

Electrect

Cardioid

10mW 5mW

1,5V (AA, E91, LR6, 3V (2 x AAA, Alkaline)

AM3 Alkaline)

60mA

Tipico 12 ore

210 g

25mA

Tipico 12 ore

100 g

SW SW Diversity

Quartz-controlled

2

12/18V

Quartz-controlled

2

12 V dc/300 m A

external

Adjustable

0:300mV

0,9 Kg

with power supplier

Adjustable

12V dc/300 m A 0:300mV

0,9 Kg

33

FBTAC US 8001D FBTAC Mh 750 FBTAC US 902D

WIRELESS MICROPHONES UHF

FBTAC Mh 920

UHF PLL true diversity receiver

• Suitable for 1 transmitter (FBTAC

Mh 750, FBTAC Mh 920, FBTAC

PT 850 B)

• Preset with 16 selectable UHF channels (782MHz-806MHz)

• Diversity technology preventing from signal losses in RF links

• Noise Mute e and pilot tone squelch circuit to avoid interferences

• Balanced and unbalanced XLR outputs

• 1/2 U rack metal chassis

Microphone with UHF PLL transmitter

Code 27494

• 16 selectable channels

• Frequency band: 782MHz -

806MHz

• Advanced circuits guaranteeing stable transmission signals

• Squelch tone-key

• Wide dynamic range and fl at frequency response

• Internal antenna, lightweight hard plastic case

UHF PLL true diversity receiver

• Preset with 16 selectable UHF channels (782MHz-806MHz)

• Suitable for 2 transmitters

(FBTAC Mh 750, FBTAC Mh 920,

FBTAC PT 850 B)

• Diversity technology preventing from signal losses in RF links

• Noise Mute e and pilot tone squelch circuit to avoid interferences

• LCD Display

• Balanced and unbalanced outputs

• 1 U rack metal chassis

Microphone with UHF PLL transmitter

Code 27496

• 16 selectable channels

• Frequency band: 782MHz -

806MHz

• Advanced circuits guaranteeing stable transmission signals

• Wide dynamic range and fl at frequency response

• Advanced circuits and squelch key avoiding interferences

• Internal antenna

• Suitable for condenser or dynamic cartridge

• LOCK-ON function to avoid accidental interruptions

34

FBTAC Mh 750 FBTAC US 8001D FBTAC Mh 902 FBTAC US 902D

FBTAC PT 850B

FBTAC CM 501

FBTAC CX 504

Body pack transmitter

Code 27495

• 16 selectable channels

• Frequency band: 782MHz -806MHz

• AA battery supply

• Featuring 4P mini XLR connector

• Hard and solid plastic case

• Compatible with lavalier and boom microphones

• LED display, designed for waist carrying

Lavalier microphone

Code 27497

Lavalier unidirectional cardioid condenser microphone

4P mini XLR connection, frequency response 100-15,000Hz;

Sensitivity (at 1,000Hz): -60±3 dB* (1mV)*0dB=1V/µbar, 1kz;

Impedance 2.2Kohm; wide dynamic range and excellent frequency response; small size for low visibility; including the clip for easy hanging on ties, suits, lapels. Net weight: 21.5 gr.

Cardioid microphone

Code 27498

Cardioid condenser boom microphone; perfect for voice. 4P mini XLR connection, frequency response

30-18,000Hz; Sensitivity (at 1,000Hz): -68±3 dB*

(0.4mV)*0dB=1V/µbar, 1kz; impedance 680Kohm; excellent pre-feedback gain and noise insulation; light weight enabling free movement; ergonomic design guaranteeing wearing comfort;

Net weight: 56.3 gr.

Code

FBTAC US 8001 D

27493

RF FREQUENCY Range 782MHz-806MHz

Oscillation Type PLL

Channel

Frequency response

Bandwidth

16

50Hz-18kHz

24MHz

Operating range

Receiver mode

Signal/Noise Ratio

Sensitivity RF

Display

Controls

100 M

Diversity

>100dB

-107dBm (12dB S/N AD)

LED

On/Off, volume, channel Up/Down

FBTAC US 902 D

27492

782MHz-806MHz

PLL

16

50Hz-18kHz

24MHz

100 M

Diversity

>100dB

-107dBm (12dB S/N AD)

LCD

On/Off, volume, channel Up/Down ,

Squelch level

Audio Output Level -12dB

AF Output Impedance 600ohm unbalanced

Squelch

Operating voltage

-12dB

2,2Kohm unbalanced pilot tone and Noise Mute pilot tone and Noise Mute

12-18VDC, 600mA 12-18VDC, 600mA

Outputs

Dimensions (WxHxD)

Code

1 balanced XLR and 2 balanced XLR and

1 unbalanced Jack 6,3mm 1unbalanced Jack 6,3mm

221x40x152mm

FBTAC Mh 750

27494

Frequency Deviation +/-48KHz

S/N

Current consumption 100mA

LCD / LED indicators Power On/Off Power

Batteries

>100dB (1kHz - A)

Battery Level

2xAA 1,5V

480x45x232mm

FBTAC Mh 920

27496

+/-48KHz

>100dB (1kHz - A)

100mA

On/Off Power

Battery Level

2xAA 1,5V

PREAMPLIFIER EQUIPMENT

CONTROL UNITS AND

MIXERS

POWER AMPLIFIERS

RACKS

MUSIC SOURCES

AMPLIFICATION

EQUIPMENT

Sound Design Project for World Trade Center

(Zaragoza)

420

FBT AC MX-8

AUTOMATIC MICROPHONE MIXER

The microphone automatic mixers provide great convenience to sound reinforcement installation with any size and any combination. full feature design includes

• Daisy-chain with unlimited number of the mixer

• Three operation modes: onechannel-at-a-time, all active or override

• Switchable output levels between mic. and line level

• Individual gain control and phantom power for each channel

• Last in stays on for continuous ambience sound

• Control voltage provided to trigger external device such as a speaker switching and camera switching

The outstanding performance enables effective managing of multi-microphone installation including corporate boardrooms, conference rooms, government builds, houses of wokship, classrooms

36

D8P-1

Extension cable

Code 37936

• Din 8 Pin Male/Male Cable

• Lenght 0,8 m

Code

Type

Mic

Line

Output

Type

Mic

Line

MAX Output Level

MAX Gain

Frequency Respond

THD%

Signal-to-noise radio

Input Attenuation

Phantom Power

Mic In Attenuation

Mic Attenuation

Output Attenuation

Voltage Output

Power Supply

Power Consumption

Fuse

Weight

Dimensions

FBT AC MX-8

37645

XLR

4.7Kohm

20Kohm

XLR

300ohm

200ohm

>17dB

>70dB

35~20,000 Hz

<0.06%

>70 dB

-50dB

+48V

-10dB / -20dB

-10dB / -15dB / -20dB

-50dB

+4VDC ±0.3V

18VDC, 1A

13.5W

T0.5AE 250V (Slow-Blow)

2.25 kg

420x44x198.5mm

482

M 12X4

PREAMPLIFIER MIXER

Preamplifi er/mixer with 12 inputs and 4 outputs

• 4 micro/line inputs;

• Priority of the 4 microphone inputs over all other inputs and priority of the fi rst input over the other 3

• Volume control and voice control for the 4 microphone inputs

• Phantom 24V. 4 stereo line inputs on double RCA with selection via purpose-provided selector knob

• General volume and tone control

• 2 XLR outputs for

• Left and right channel with independent volume control for each channel

• One stereo output and one stereo recording output

• 1 rack unit

CP-2

Cassette player

STUDIO PRO 9BA

Amplifi ed Box

TM-2

Digital tuner

MCA 2240 o MCA 4240

Power unit

MD-S 1100

Microphones

CD-2

CD player

MD-S 1100

Microphones

M 12X4

Code

Mono Channels micro

18147

Impedance kohm

Max input signal dBu

Max gain (@ main Out)dB

Equivalent input noise (EIN)

(between 22Hz and 22KHz unweighted)

CMRR (@main out, Gain 75dB)dB

Mono Channels line Impedance kohm

2,2

0

65

- 118

- 65

33

Max input signal dBu

Max gain (@main Out) dB

Mono Channels tone Voice dB

30

25

± 12

Stereo Channels

tone

Impedance kohm

Max input signal dBu

Max gain (@ main Out) dB

Stereo Channels tone High Shelving (@12kHz) dB

General outputs

Power supply

Low Shelving (@80kHz) dB

Impedance kohm

22

10

10

± 15

± 15

600

Max output (main out) dBu

Distortion + [email protected]

Signal/noise ratio 20dB

(main out, 40dB gain)

Frequency response (@0/1dB)

22

0,025%

96

20Hz-20kHz

100V÷230V - 50Hz÷60Hz with internal power supply unit

Cassette

STUDIO 3 BT/WP

Loudspeaker

37

482

MMZ 8004 S

4-ZONE PREAMPLIFIER

Preamplifi er/mixer with 10 inputs and 4 outputs

• 6 Combo inputs

• 4 stereo line inputs for CD, Tape,

Tuner and Aux, selected on each output zone

• 4 output buses with independent control

• Microswitch on each input for routing to each output

• Adjustable sensitivity of micro and line inputs

• Designed for connection to up to 2 amplifi ed microphone bases from the MBT8000 series equipped with zone selector switches

• Designed for connection to emergency detection systems for guided evacuation, with priority over all inputs

• Automixer operating mode on

3 microphone channels, thanks to the GATING function (this function allows for the level of speech to be increased before the “Larsen effect” - feedback whistling - occurs)

• Internal switching power supply from 100V to 230V and from 50Hz to 60Hz

• 2 rack units

38

4 ZONE PAGING - LOCAL PRIORITY

MB-T 8004

Microphone base

IN

MMZ 8004S

4 zones preamplifi er

1/4 Power unit zone 1

1/4 Power unit

1/4 Power unit

MPU series

1/4 Power unit zone 2 zone 3 zone 4

Code

Features

Microphone-Max

gain line

Input 1 and 2

MMZ 8004 S

19812

Dimensions 2 racks with frame with RAL 7035 grey paint fi nish

6 micro/line inputs with Combo connector

(XLR and JACK) 75dB/2kohm

Terminal board with option to select output 1,2,3

Max. gain line/Imp. and 4 from a remote microphone

4 stereo inputs pin jack RCA 40dB/33kohm

Frequency [email protected]/-1dB 20Hz÷80KHz

S/N [email protected] of gain 110dB

Level control

High pass fi lter

Voice control

Tone control

8 Volume controls, 6 GAIN controls, 2 Master

Channels1:6 micro/[email protected]/oct.

6 adjustment trimmers for voice presence on mic. inputs

2 separate bass and treble tone controls on music inputs only

Phantom Power supply

Output 1, 2, 3 and 4

Inputs Music

Outputs dB/Impedance

Auxiliary outputs

Priority on music

Remote controls

Emergency control

Insert bus 1 and 2

Luminous indicators

Power supply VAC

Optional accessories

48 VDC activated on micro inputs only

Selectors enable routing of each input to output 1,2,3, 4

4 stereo inputs on double RCA for CD, Tape,

Tuner and Aux selected on each output zone

28 dBu/600 ohm balanced

Direct outputs channels 1-6 + recording socket output

1,2,3 and 4 0 dBu/600 ohm

Direct outputs channels 1-6 + recording socket output

1,2,3 and 4 0 dBu/600 ohm

Optional cards for: remote volume for outputs 1,2,3 and

4 - Automatic level control according to background noise on output 1

Input with photo coupler, Open Collector output

6.3mm stereo jack socket to connect auxiliary equipment

Led indicating saturation level (peak) on outputs 1,2,3, and 4 - phantom on (48 VDC micro)

230 VAC or 120 VAC with internal power supply unit

MMZ-AR card for automatic level control according to background noise (output 1 only)

MMZ-VRC card for remote volume control for pair of outputs 1/2

MZU 2008

ZONE PAGING UNIT

The MZU 2008 switching unit can be installed in 19” racks for selective voice/music switching in

8 audio zones, with the possibility to increase the number of zones as multiple of 8, adding other MZU

2008 in cascade.

Selection of the zones in which the music is to be interrupted and an announcement transmitted is carried out from the MBT 8008 control console.

Using the 8 “MUSIC” keys on the front panel, you can choose in which of the 8 audio zones to play the normal background music and in which zones no music is to be played. The system can be confi gured in one of the following ways:

• a) the 2 inputs of the unit are driven by two amplifi ers, one of which is dedicated to voice transmission and the other to music transmission.

The 8 outputs of the unit drive the 8 speakers of the 8 audio zones.

• b) the 2 inputs of the unit are driven by two signal preamplifi ers, one of which is dedicated to voice transmission and the other to music transmission.

The 8 outputs of the unit drive the 8 power amplifi ers dedicated to sound diffusion in the 8 audio zones.

MB-T 8008

Microphone base

MZU 2008

Paging unit

MXA 1120

Integrated amplifi er

CD or TAPE

MXA 3120

Integrated amplifi er

Code

Characteristics

MZU 2008

12944

1 rack unit with frame with RAL 7035 light grey paint fi nish

Inputs 2 music inputs with two wires, speech with three wires, one of which is used for Emergencies (for amplifi ers)

Outputs for loudsp. line (zones) 8 with three wires, one of which is used for Emergencies

Max. applicable power 1200 Watt/100 V, 840 Watt/70V, 600 Watt/50V, 300

Controls

Remote controls

Output power supply

Luminous indicators

VAC Power supply

Optional accessories

Watt/25V

Speech key for each zone. Music key for each zone.

General call key. Power ON-OFF key

Zone selection control. General call command.

Activation of emergency and OPEN COLLECTOR output

Power supply +15/0/-15 VDC

Speech Led and Music Led per zone. General call indicator led. Emergency indicator led.

Power ON-OFF indicator led

230 VAC with external power supply unit

120 VAC with external power supply unit

MBT 8008 microphone base

39

482

MPU 2120 MPU 4060

MULTI CHANNEL 100V LINE POWER UNITS

• Output with transformers for

100V and 70V lines

• Frequency response

40Hz to 20kHz

• 40Hz internal high-pass fi lter

• Confi gurations: 2x120W

• Thermal

and short-circuit protections

• 2 U rack

Same features as the MPU 2120 model except for the following difference:

• Confi gurations: 4x60W, 2x120W

40

Code

Features

MPU 2120

31080

2-channel monoblock amplifi er

Output power of all the driven channels 2x120Wrms 100V/70V

Frequency response

(@1 W, -3dB 100V output)

40Hz÷20kHz

40Hz internal high-pass fi lter

Signal/noise ratio 96dB (with fi lter 22Hz÷22kHz)

Separation between chan. [email protected]/8ohm > 80dB

[email protected]/8ohm

Inputs

Input sensitivity

0,005% balanced with screw connector

0dBu (0.775V) balanced

Input impedance

Controls

Light indicators

Power supply Vac

Absorption

Operating conditions

Protections

Cooling

Dimensions (WxHxD)

6dBu (1.5V) unbalanced

20kohm balanced

10kohm unbalanced

Volume control for each channel located in the back panel

Input signal presence for each OC (over current) channel and Fault every two channels

Internal setting 85÷132Vac

170÷264Vac (default)

300VA (@ max power with music signal)

-20°C+40°C with max. humidity <90%

Short-circuit (OC), thermal (Fault)

1 ø 60mm fan

482x88x430mm (2 U rack)

MPU 4060

31079

4-channel monoblock amplifi er

4x60Wrms 100V/70V

2x120Wrms 100V

40Hz÷18kHz

40Hz internal high-pass fi lter

96dB (with fi lter 22Hz÷22kHz)

> 80dB

0,004% balanced with screw connector

0dBu (0.775V) balanced

6dBu (1.5V) unbalanced

20kohm balanced

10kohm unbalanced

Volume control for each channel located in the back panel

Input signal presence for each OC (over current) channel and Fault every two channels

Internal setting 85÷132Vac

170÷264Vac (default)

250VA (@ max power with music signal)

-20°C+40°C with max. humidity <90%

Short-circuit (OC), thermal (Fault)

1 ø 60mm fan

482x88x430mm (2 U rack)

482

MPU 4120 MPU 4240

MULTI CHANNEL 100V LINE POWER UNITS

• Output with transformers for

100V and 70V lines

• Frequency response

40Hz to 20kHz

• 40Hz internal high-pass fi lter

• Confi gurations:

4x120W, 2x240W

• Thermal

and short-circuit protections

• 2 U rack

Same features as the MPU 2120 model except for the following difference:

• Confi gurations:

4x240W, 2x480W

Code

Features

MPU 4120

31059

4-channel monoblock amplifi er

Output power of all the driven channels 4x120Wrms 100V/70V

2x240Wrms 100V

Frequency response

(@1 W, -3dB uscita 100V)

40Hz÷20kHz

40Hz internal high-pass fi lter

Signal/noise ratio

Separation between channels

[email protected]/8ohm

Inputs

Input sensitivity

96dB (with fi lter 22Hz÷22kHz)

> 80dB

0,005% balanced with screw connector

0dBu (0.775V) balanced

Input impedance

Controls

Light indicators

Power supply Vac

Absorption

Operating conditions

Protections

Cooling

Dimensions (WxHxD)

6dBu (1.5V) unbalanced

20kohm balanced

10kohm unbalanced

Volume control for each channel located in the back panel

Input signal presence for each OC (over current) channel and Fault every two channels

Internal setting 85÷132Vac

170÷264Vac (default)

600VA (@ max power with music signal)

-20°C+40°C with max. humidity <90%

Short-circuit (OC), thermal (Fault)

1 ø 60mm fan

482x88x430mm (2 U rack)

MPU 4240

31078

4-channel monoblock amplifi er

4x240Wrms 100V/70V

2x480Wrms 100V

40Hz÷18kHz

40Hz internal high-pass fi lter

96dB (with fi lter 22Hz÷22kHz)

> 80dB

0,005% balanced with screw connector

0dBu (0.775V) balanced

6dBu (1.5V) unbalanced

20kohm balanced

10kohm unbalanced

Volume control for each channel located in the back panel

Input signal presence for each OC (over current) channel and Fault every two channels

Internal setting 85÷132Vac

170÷264Vac (default)

1200VA (@ max power with music signal)

-20°C+40°C with max. humidity <90%

Short-circuit (OC), thermal (Fault)

2 ø 60mm fan

482x88x430mm (2 U rack)

41

482

MCA 4030

MULTI-CHANNEL CONSTANT VOLTAGE (100 V)

Monoblock power amplifi er with

4 independent channels and 4

100V line transformers

• Confi gurations possible: 4x30W or 2x60W on 100V

• Level control on front panel

• Luminous indication of the operating mode

• Emergency control with an output open collector and an input for the alarm signal activation command

• Outputs with 3 wires for line, common and emergency

42

Code

Characteristics

Continuous power with all

Frequency response @1 W, -3dB

Harmonic distortion THD+N

Signal/noise ratio

Separation between channels

Inputs

Input impedance

Input sensitivity

Controls

Indicators

Output connector type

VAC power supply

Absorption

Operating conditions

Protections

Dimensions

MCA 4030

20236

Monoblock amplifi er with 4 channels

4x30W (100V) 2X60W (100V) piloted channels from 20Hz to 50 kHz

< 0.05%

85dB (with fi lter 22Hz-22kHz)

-66dB @100Hz, -75dB @ 1kHz, -70dB @ 10kHz

A and B balanced, with screw connector (B priority)

10kOhm (unbalanced) 20kOhm (balanced)

0dBu (0.775V) with balanced input, 6dBu (1.5) with unbalanced input

Volume control for each channel

Visual led indicators for each channel

“Faston” connectors

100V÷230V - 50Hz÷60Hz with internal power supply unit

300 W (@ max power with music signal)

-20°C+40°C with max. humidity <90%

Thermal, short circuit, soft start

482x88x220mm (2 U rack)

CM

RACKS

Rack

depth 500mm, ready-to-assemble kit, made of sheet steel with RAL

7035 paint fi nish, comprising:

• Base (W=534xD=500mm) with four M10 threaded fi ttings

• Lid (W=534xD=500mm)

• Two side panels with 19” vertical pitch and ventilation slits

• Four swivel castors

• Assembly hardware set

Note: 1U = 44mm

MRK

RACK CABINET

Preassembled Rack cabinet

depth 600mm, made of sheet steel with RAL 7035 paint fi nish, comprising:

• Two side panels with 19” vertical pitch with ventilation slits

• Solid rear panel

• Reversible hinged door with glass window and lock

• Four swivel castors (optional)

Note: 1U = 44mm

Grey racks RAL7035

CM 08 CM 12 CM 18 CM 22

Code

Description

12682

8U

12681

12U

12385

18U

11827

22U

CM 26

12669

26U

Dimensions WxD 500x530 500x530 500x530 500x530 500x530

Dimensions H 400 580 850 1030 1200

Weight 19 22,6 27,2 30 34,3

Plexiglas doors with lock

Code

Description

AP 08

12897

8U

AP 12

12898

12U

AP 18

12667

18U

AP 22

12178

22U

AP 26

12668

26U

Rear perforated panels

PP-A 02 PP-A 08 PP-A 12

Code

Description

12899

2U

12900

8U

12901

12U

Grey racks RAL7035

MRK 12 MRK 20 MRK 24 MRK 30 MRK 36

Code

Description 12U

36546

20U

35673

24U

35839

30U 36U

Dimensions WxD 600x600 600x600 600x600 600x600 600x600

Dimensions H 590 950 113 140 167

43

SO

Pair of omega rack supports

Model Code Height Weight Cabinet

SO-12 12907 532mm 1,4 kg AR12

ACCESSORIES

SO-18

SO-22

12908 800mm 2,1 kg AR18

12909 978mm 2,6 kg AR22

PA-A PC

RP 02

Cabinet panels

Model Code Description Colour

PA-A 01 12905 Perforated 1U grey RAL7035

PC 01 12117 Solid 1U grey RAL7035

PC 02

PC 03

12116 Solid 2U

12912 Solid 3U grey RAL7035 grey RAL7035

Universal internal shelf

Model Code Description Colour

RP 02 12913 2U grey RAL7035

SA 02

Rack upright

Model Code

SA 02 12906

DG 01

Cage nut

Model Code Pack

DG 01 12114 50 pcs

MPS1016

Power Supply Panel

Code 04693

(1 rack unit)

MUSIC SOURCES AND POWER SUPPLY PANEL

482

482

Remote control included with MS02 CD3/T

MS02 CD3/T

MUSIC SOURCES

MS02 CD3/DG

Dual source

• 2 sections, each one featuring a stereo output with its own volume control

• One selector, shared by both sources, can mix stereo channels changing to MONO the CD and radio output for applications that do not need stereo sound

• It can be installed into a

19” rack 1U

• The CD player can play audio tracks and MP3 fi les from compact disc

(CD, CD-R, CD-R/W) or USB drives

(“Flash memory-stick with mp3 fi les)

• USB port on the front panel

• FM radio tuner (87.5-108 MHz) that can store up to 10 radio stations

• LCD display

Dual sound source system composed of:

USB & SD Card Reader and Recorder / Remote Control

• Recording through the Line-in is directly store to USB or SD Card

• Offers USB and SD Card function of each replication

• Recording format: MP3

• Playing format: MP3, WMA

• Accept the capacity of 128MB to

16G USB or SDHC Card

• With a language learning function, can be broadcast repeatedly at designated areas

• Adjustable recording quality, provide choice of,128Kbps and 192Kbps

Anti Shock CD / USB & SD Card

Reader / Remote Control

• Features

• Offers USB, SD Card and CD playing function of each replication

• Playing format: MP3, WMA

• Accept the capacity of 128MB to

16G USB or SD Card

• With a language learning function, can be broadcast repeatedly at designated area

MS02 CD3/T

MS02 CD/DG

Code

Tuner

Memories for the tuner (FM10 e AM10)

Mechanics

Inputs/Outputs

Power supply

Power consumption

Weight

Dimensions (WxHxD)

MS02 CD3/T

27867

AM/FM

20

Antishock mechanics and electronics

CD player that can play CD, CD-R, CD-R/W,

MP3, USB MP3

Input: unbalanced 75ohm FM Antenna terminals - AM antenna loop terminals -

USB port for memory stick - Output: audio

RCA for AM/FM tuner - audio RCA for CD player

220Vac

50VA

3.5 kg

482x44x250mm

MS02 CD3/DG

Code 27868

Mains power supply

DC External power supply

Mains consumption

DC consumption

CD/USB/SD player output level

230 VAC ±10% 50/60 Hz

24 VDC

45 VA

700 mA (max)

250 mV

USB/SD reader &recorder output level 900 mV

Weight

Dimensions (WxHxD)

4,5 kg

81 x 44 x 285

45

430

MPA 5120

120W POWER AMPLIFIERS

EN 54 - 16

MPA 5240

240W POWER AMPLIFIERS

MPA 5480

480W POWER AMPLIFIERS

This is a new range of power units designed specifi cally for professional sound-broadcasting systems with service and emergency messages. Thanks to the great reliability of the protection circuits used, combined with an attractive appearance and the very tough structures, the

MPA range constitutes the ideal product for quality amplifi cation, with a particularly interesting price/ performance ratio. If this amplifi er is used in emergency systems, it is possible to disable all the front-panel controls (tone and volume controls).

In this way it is possible to prevent the levels set at the time of commissioning the system from being altered accidentally.

Balanced line input/output

(XLR-F and XLR-M sockets, with adjustable sensitivity).

• Unbalanced line input (double

RCA socket)

• MBT 1101 microphone station input (RJ45 socket)

• Telephone/emergency audio input for priority calls with adjustable threshold and sensitivity

• Front panel overall volume control and treble and bass controls

• Rear-panel selector switch for enabling/disabling front-panel tone and volume controls

• Constant voltage (50/70/100 V) or 8 impedance loudspeaker line output.

• LED-type Vu meter for clear and immediate monitoring of output power

• Contacts for activating precedence on line input

• Alerting signal (chime) with level control

• Selectable 230/115 VAC and 24

VDC mains power supply

46

Code

Rated output power

Costant voltage output / low impedance output

Tones control

In UNITS

Sensitivity / Impedance

S/N Ratio

Frequency response

Number of consoles MBT 1101

Line input

Sensitivity / Impedance

S/N Ratio

Frequency response

Telephone input

Sensitivity / Impedance

S/N Ratio

Frequency response

Line OUT

Power supply

Mains power supply

External DC power supply

Rack dimensions 19”

Dimensions (L x H x P)

Weight

MPA 5120

37490

120 W

MPA 5240

37489

240 W

MPA 5480

37491

480 W

100-70-50 V / 8 100-70-50 V / 8 100-70-50 V / 8

Bass ± 10 dB (100 Hz) ; Treble ± 10 dB (10 kHz) Bass ± 10 dB (100 Hz) ; Treble ± 10 dB (10 kHz) Bass ± 10 dB (100 Hz) ; Treble ± 10 dB (10 kHz)

RJ45 (MBT 1101) RJ45 (MBT 1101) RJ45 (MBT 1101)

1250 mV

> 78 dB

30 ÷ 20.000 Hz

320 mV

> 78 dB

30 ÷ 20.000 Hz

320 mV

> 78 dB

30 ÷ 20.000 Hz

Max 6 consoles in daisy chain max distance 200 mt

Max 6 consoles in daisy chain max distance 200 mt

Max 6 consoles in daisy chain max distance 200 mt balanced XLR, unbalanced RCA

300 mV / 60 k

>77 dB

30 ÷ 20.000 Hz balanced with priority activation

120 mV / 6 k

>75 dB

230 ÷ 13.000 Hz balanced, XLR

230/115 Vca - 50/60 Hz / 24 Vcc

280 W (320 VA)

6,6 A / 0,2 A

Optional bracket RMK 5000

432 x 88 x 272 mm

8,2 kg balanced XLR, unbalanced RCA

300 mV / 60 k

>77 dB

30 ÷ 20.000 Hz balanced with priority activation

120 mV / 6 k

>75 dB

230 ÷ 13.000 Hz balanced, XLR

230/115 Vca - 50/60 Hz / 24 Vcc

535 W (610 VA)

13,2 A / 0,2 A

Optional bracket RMK 5000

432 x 88 x 272 mm

10,5 kg balanced XLR, unbalanced RCA

300 mV / 60 k

>77 dB

30 ÷ 20.000 Hz balanced with priority activation

120 mV / 6 k

>75 dB

230 ÷ 13.000 Hz balanced, XLR

230/115 Vca - 50/60 Hz / 24 Vcc

1160 W (1330 VA)

33 A / 0,8 A

Optional bracket RMK 5000

432 x 88 x 360 mm

16 kg

320

AM 5030

INTEGRATED AMPLIFIERS

30W Integrated amplifi er

• 2 microphone sockets

• Priority of microphone over music

• Low impedance and 100V

outputs

• 2 rack units

Code

Features

Rated/Maximum power

Frequency response

Distortion (Rated P. 1kHz)

Inputs/Sensitivity -Impedance

Output impedance

Output voltage

Tone controls

VAC power supplies

Weight

Dimensions (WxHxD)

AM 5030

11583

100W desktop amplifi er

30/40W

50÷18kHz

<3%

Linea 100mV

4-8-16ohm

100V

150Hz/1kHz-6kHz

220Vac

4,7 Kg

320x80x190mm

430

MXA 1060

INTEGRATED AMPLIFIERS

MXA 1120

• 2 microphone inputs with phantom power supply (XLR). MIC

1 with automatic precedence function (VOX) and threshold adjustment control

• Microphone input (XLR) with phantom power supply or RJ45 for connecting up to 6 MBT 1101 microphone stations (maximum distance 200 m)

• MIC/PH/LINE input with associated selector switch 2 auxiliary inputs for sound sources (TAPE/CD)

• Telephone/emergency audio input for priority calls with adjustable threshold and sensitivity

• Front-panel level control for each microphone and auxiliary input

• Front panel overall volume control and treble and bass controls

• Constant voltage (50/70/100 V) or

8 impedance loudspeaker line output

• Auxiliary line output

• LED-type Vu meter for immediate monitoring of output power

• Microswitches for setting priorities and input functions

• Inclusion/exclusion of speech fi lter on all microphone inputs

• Contacts for activating input precedence

• Alerting signal (chime) with level control

• Selectable 230/115 VAC and 24

VDC mains power supply

48

Code

Rated power output

Costant voltage output / low impedance output

Tones control

MIC.1 and MIC.2 input

Sensitivity / Impedance

S/N Ratio

MIC3 / UNITS input

Sensitivity / Impedance

S/N Ratio

Number of consoles MBT 1101

MIC / LINE 4 input

Sensitivity / Impedance (MIC / LINE 4)

S/N Ratio MIC / LINE 4

Auxiliary input

Sensitivity / Impedance

S/N Ratio

Telephon input

Sensitivity / Impedance

S/N Ratio

LINE OUT

Power supply

Max power consuption

Max power at 24 Vcc

Rack dimensions 19”

Dimensions (L x H x P)

Weight

MXA 1060

37638

60 W

100-70-50 V e 8

Bass ± 10 dB (100 Hz) ; Treble ± 10 dB (10 kHz)

2 balanced, XLR (phantom power 17,5 V)

MIC1 with priority activation

0,9 mV / 900

>62 dB balanced, XLR (phantom power) Rj45 (MBT 1101)

MIC.: 0,9mV / 900 - UNITS: 290 mV / 700 k

MIC.: >62 dB – UNITS: >65 dB

Max 6 consoles in daisy chain max distance 200 mt balanced, XLR with Phantom selector/Mic/Line

MIC: 0,9 mV / 900 - LINE: 90 mV / 50 k

MIC: >62 dB – LINE: >70 dB

2 unbalanced, RCA (CD, TAPE)

150 mV / 6 k

>70 dB balanced with priority activation

150 mV / 6 k

> 72 dB

900mV / 100 unbalanced, RCA

230/115 Vca - 50/60 Hz / 24 Vcc

130 W (150 VA)

3,4 A / 0,1 A

Optional bracket RMK 5000

430 x 88 x 234 mm

6,5 kg

MXA 1120

37639

120 W

100-70-50 V e 8

Bassi± 10 dB (100 Hz) ; Treble± 10 dB (10 kHz)

2 balanced, XLR (phantom power 17,5 V)

MIC1 with priority activation

0,9 mV / 900

>62 dB balanced, XLR (phantom power) Rj45 (MBT 1101)

MIC.: 0,9mV / 900 - UNITS: 290 mV / 700 k

MIC.: >62 dB – UNITS: >65 dB

Max 6 consoles in daisy chain max distance 200 mt balanced, XLR with Phantom selector/Mic/Line

MIC: 0,9 mV / 900 - LINE: 90 mV / 50 k

MIC: >62 dB – LINE: >70 dB

2 unbalanced, RCA (CD, TAPE)

150 mV / 6 k

>70 dB balanced with priority activation

150 mV / 6 k

> 72 dB

900mV / 100 unbalanced, RCA

230/115 Vca - 50/60 Hz / 24 Vcc

270 W (320 VA)

6,7 A / 0,2 A

Optional bracket RMK 5000

430 x 88 x 234 mm

9 kg

MXA 3120

INTEGRATED AMPLIFIERS

MXA 3240

430

USB 3000

USB/SD card Module

Code 37642

• 2 balanced/unbalanced microphone inputs with phantom power supply

• Microphone input or microphone stations of the MBT 1000 range

• 2 MIC/PH/LINE inputs with specifi c selector switch

• 2 auxiliary inputs for sound sources (TAPE/CD)

• Telephone/emergency audio input for priority calls with adjustable threshold and sensitivity

• Front-panel adjustment of the level of each microphone and auxiliary input

• Front-panel control of overall volume and of treble and bass tones

• Provisions for inserting via the front panel a USB/SD CARD module ( )

• Constant voltage (50/70/100 V) or

8 impedance loudspeaker line output

• 3 output lines for zones

• Balanced line output for connection to other amplifi ers

• Output/input for connection to audio processors

• LED-type Vu meter for clear and immediate reading of power emitted

• Microswitches for setting operating modes

• Includable/excludable speech fi lters on all microphone inputs

• Contacts for activating input precedence and override

• “Music On Hold” output with output level control (output of the selected auxiliary signal)

• Alerting signal (chime) with level control

• Front-panel keys for selecting music listening zones

• Selectable mains power supply -

230/115 VAC or 24 VDC

Code

Rated power output

Costant voltage output / low impedance output

Tones control

MIC.1 e MIC.2 input

Sensitivity / Impedance

S/N Ratio

MIC3 / UNITS input

Sensitivity / Impedance

S/N Ratio

Number of consoles MBT 1101

MIC / LINE 4 input

Sensitivity / Impedance

S/N Ratio

Auxiliary inputs

Sensitivity / Impedance

S/N Ratio

Telephone output

Sensitivity / Impedance

S/N Ratio

LINE OUT

Power supply

Max power consuption

Max power at 24 Vcc

Rack dimensions 19”

Dimensions (L x H x P)

Weight

MXA 3120

37640

60 W

100-70-50 V e 8

Bass ± 10 dB (100 Hz) ; Treble ± 10 dB (10 kHz)

2 balanced, XLR (phantom power 17,5 V)

MIC1 with priority activation

0,9 mV / 900

>62 dB balanced, XLR (phantom power) Rj45 (MBT 1101)

MIC.: 0,9mV / 900 - UNITS: 290 mV / 700 k

MIC.: >62 dB – UNITS: >65 dB

Max 6 consoles in daisy chain max distance 200 mt balanced, XLR with Phantom selector/Mic/Line

MIC: 0,9 mV / 900 - LINE: 90 mV / 50 k

MIC: >62 dB – LINE: >70 dB

2 unbalanced, RCA (CD, TAPE)

150 mV / 6 k

>70 dB balanced with terminal for priority activation

150 mV / 6 k

> 72 dB

900mV / 100 , unbalanced RCA

230/115 Vca - 50/60 Hz / 24 Vcc

130 W (150 VA)

3,4 A / 0,1 A

Optional bracket

430 x 88 x 234 mm

6,5 kg

MXA 3240

37641

120 W

100-70-50 V e 8

Bass ± 10 dB (100 Hz) ; Treble ± 10 dB (10 kHz)

2 balanced, XLR (phantom power 17,5 V)

MIC1 with priority activation

0,9 mV / 900

>62 dB balanced, XLR (phantom power) Rj45 (MBT 1101)

MIC.: 0,9mV / 900 - UNITS: 290 mV / 700 k

MIC.: >62 dB – UNITS: >65 dB

Max 6 consoles in daisy chain max distance 200 mt balanced, XLR with Phantom selector/Mic/Line

MIC: 0,9 mV / 900 - LINE: 90 mV / 50 k

MIC: >62 dB – LINE: >70 dB

2 unbalanced, RCA (CD, TAPE)

150 mV / 6 k

>70 dB balanced with terminal for priority activation

150 mV / 6 k

> 72 dB

900mV / 100 , unbalanced RCA

230/115 Vca - 50/60 Hz / 24 Vcc

270 W (320 VA)

6,7 A / 0,2 A

Optional bracket

430 x 88 x 234 mm

9 kg

49

MDS 1060 MDS 1120

MUSIC DISTRIBUTION SYSTEM

MDS 1240

The MDS 1000 compact systems combine a reliable amplifi er, an

MP3 player, an SD/MMC card drive, a USB socket for connection to external storage units and a digital FM tuner in a single piece of equipment that also features a range of functions typical of sound-broadcasting systems.

The XLR sockets on the rear panel can be separately confi gured as microphone inputs (with or without phantom power supply) or as line inputs. The operating mode can be selected by means of the specifi c three-position switches above the sockets. Each of these inputs has its own level control so as to be able to adjust the amplitude of the various different signals suitably. In addition, the

MIC/LINE 1 microphone input has an automatic precedence function (VOX): when speaking with the microphone connected to this input, all the music and microphone inputs will be automatically muted.

It is possible to connect all dynamic microphones and the

MBT 6400S microphone bases to the MDS 1000 Compact Systems.

• MP3 fi le player via USB, SD or

MMC card

• FM digital tuner

• n°3 MIC./LINE inputs with operating mode selector switches.

• n°1 VOX input (MIC/LINE 1)

• n°1 auxiliary input for sound sources (TAPE/CD)

• XLR sockets for connection to dynamic microphones and/or

MBT 6400S microphone bases

• Terminal strip for loudspeakers output (25-70-100V/4ohm)

• Terminal strip for external 24

Vdc power supply

• Terminal strip for microphone precedence

• Possibility to connect an external equalizer and/or booster.

• Selectable mains power

(230/120Vac)

50

430

Code

RMS output power (THD <1%)

Constant voltage outputs

Low impedance outputs

Tones control

Bass tones @100 Hz

Treble tones @10 kHz

Microphone/line inputs

Sensitivity/impedance

S/N Ratio

S/N Ratio (‘A’ weighted)

MIC/LINE 1 VOX activation threshold

Frequency response

Phantom supply

Auxiliary input

Sensitivity/impedance

S/N Ratio

S/N Ratio (‘A’ weighted)

Frequency response

VOX and precedence attenuation

PWR IN input

Sensitivity/impedance

S/N Ratio

S/N Ratio (‘A’ weighted)

Frequency response

LINE OUT output

Output level/impedance

PRE OUT output

Output level

Consumption

230/120V Mains power supply

±10% 50/60 Hz

External 24Vdc power supply

Dimensions

Weight

MDS 1060

37495

60 W

100, 70, 25 V

4 ohm

± 12 dB

± 11 dB

MIC

3 mV/1,5 k

68 dB

LINE

250mV/100kohm

72 dB

73 dBA

0,9 mV

35÷16.000 Hz

18 V / 2,2 kohm -

-

80 dBA

400 mV/22 kohm

78 dB

85 dBA

30÷18.000 Hz

-60 dB

1 V / 22 kohm

85 dB

100 dBA

30÷18.000 Hz

1 V / 200 ohm

1 V

P = 150 W

4 A

430x88x270 mm

6,3 kg

MDS 1120

37496

120 W

-

100, 70, 25 V

± 12 dB

± 11 dB

MIC LINE

3 mV/1,5 kohm 250mV/100kohm

70 dB 76 dB

73 dBA

0,9 mV

35÷16.000 Hz

18 V / 2,2 kohm -

-

82 dBA

400 mV/22 kohm

80 dB

82 dBA

30÷18.000 Hz

-60 dB

1 V / 22 kohm

93 dB

100 dBA

30÷18.000 Hz

1 V / 200

1 V

P = 300 W

10 A

430x88x270 mm

8,3 kg

MDS 1240

37497

240 W

-

100, 70, 25 V

± 12 dB

± 11 dB

LINE LINE

250mV/100kohm 250mV/100kohm

76 dB 76 dB

-

82 dBA

35÷16.000 Hz

18 V / 2,2 kohm -

-

82 dBA

400 mV/22 kohm

80 dB

85 dBA

30÷18.000 Hz

-60 dB

1 V / 22 kohm

93 dB

100 dBA

30÷18.000 Hz

1 V / 200

1 V

P = 600 W

20 A

430x88x270 mm

10,5 kg

MDS 6120 MDS 6240

MUSIC DISTRIBUTION SYSTEM

• 2 balanced/unbalanced microphone inputs with phantom power supplies

• Microphone input or microphone bases of the MBT 1000 range

• 2 MIC/PH/LINE inputs with associated selector switch

• 2 auxiliary inputs for sound sources (TAPE/CD)

• Telephone/emergency audio input for priority calls with adjustable threshold and sensitivity

• Front-panel level controls for each microphone and auxiliary input

• Front panel overall volume control and treble and bass controls

• Multi-purpose sound source module with CD-MP3/ USB/SD

CARD player and AM/FM tuner.

• Constant voltage (50/70/100 V) or 8 impedance loudspeaker output lines

• 6 output lines (zones) with frontpanel level control for the music signal for each single zone

• Balanced line output for connection to other amplifi ers

• Output/input for connection to audio processors

• Connection to an external amplifi er for simultaneous music and speech in different zones

• LED-type Vu meter for clear and immediate monitoring of output power

• Microswitches for setting the operating modes

• Inclusion/exclusion of speech fi lter on all microphone inputs

• Contacts for activating input precedence and override

• “Music On Hold” output with output level control (output of selected auxiliary signal)

• Alerting signal (chime) with level control

• Selectable 230/115 VAC and 24

VDC mains power supply

432

Code

Rated power output

Constant voltage outputs / Low impedance outputs

Tones control

Microphone inputs MIC.1 and MIC.2

Sensitivity / impedance

S/N Ratio

Microphone input MIC.3/UNITS

Sensitivity / impedance

S/N Ratio

Number of consoles MBT 1101

Microphone inputs MIC./LINE 4 and 5

Sensitivity / impedance

S/N Ratio

Auxiliary inputs

Sensitivity / impedance

S/N Ratio

Telephone input

Sensitivity / impedance

S/N Ratio

Frequency response

Signal outputs

LINE OUT

PRE OUT

APE OUT

Music On Hold (MOH) Pre-amplifi ed line

Music On Hold (MOH) Amplifi ed line

Power supply

Max power consuption

Rack dimensions 19”

Dimensions (L x H x P)

Weight

MDS 6120

37643

120 W

100-70-50 V e 8

Bass ± 10 dB (100 Hz) ; Treble ± 10 dB (10 kHz)

2 balanced, XLR (phantom power 17,5 V)

MIC1 with priority activation

1,2 mV / 1300

> 66 dB balanced, XLR (phantom power 17,5 V) / 1 Rj45

(MDS 1106)

MIC: 1,2 mV / 1,3 k ; UNITS: 850mV / 800 k

MIC: >66 dB ; UNITS: >76 dB

Max 8 consoles in daisy chain max distance 1 km

2 balanced XLR Phantom selector/Mic/Line

MIC: 1,2 mV / 1,3 k ; LINE: 110 mV / 130 k

MIC: >66 dB ; LINE: >77 dB

2 RCA (CD + TAPE)

CD: 450 mV / 35 k ; TAPE: 220 mV / 18 k

> 80 dB balanced with terminals for priority activation

105 mV / 6 k

> 74 dB

200 ÷ 20.000 Hz

5

XLR balanced, 1 V / 3,9 k

RCA, 0,8 V / 3,8 k

2 RCA, 0,9 V / 2 k terminal strip (HOT-COM), 2 V / 300 terminal strip (GND-MON), 1,9 W / 8

230/115 VCA - 50/60 Hz / 24 Vcc

280 W (325 VA)

6,8 A / 0,2 A

432 x 133 x 360 mm

14 kg

MDS 6240

37644

240 W

100-70-50 V e 8

Bass ± 10 dB (100 Hz) ; Treble ± 10 dB (10 kHz)

2 balanced, XLR (phantom power 17,5 V)

MIC1 with priority activation

1,2 mV / 1300

> 66 dB balanced, XLR (phantom power 17,5 V) / 1 Rj45

(MDS 106)

MIC: 1,2 mV / 1,3 k ; UNITS: 850mV / 800 k

MIC: >66 dB ; UNITS: >76 dB

Max 8 consoles in daisy chain max distance 1 km

2 balanced XLR Phantom selector/Mic/Line

MIC: 1,2 mV / 1,3 k ; LINE: 110 mV / 130 k

MIC: >66 dB ; LINE: >77 dB

2 RCA (CD + TAPE)

CD: 450 mV / 35 k ; TAPE: 220 mV / 18 k

> 80 dB balanced with terminals for priority activation

105 mV / 6 k

> 74 dB

200 ÷ 20.000 Hz

5

XLR balanced, 1 V / 3,9 k

RCA, 0,8 V / 3,8 k

2 RCA, 0,9 V / 2 k terminal strip (HOT-COM), 2 V / 300 terminal strip (GND-MON), 1,9 W / 8

230/115 VCA - 50/60 Hz / 24 Vcc

510 W (590 VA)

13,1 A / 0,3 A

432 x 133 x 360 mm

16,5 kg

51

CEILING LOUDSPEAKERS

SOUND PROJECTORS

Sound Design Project for Fuzen Sushi Restaurant - Grand Hotel Oasis

(Bulgaria)

53

206

206

SAFE 10 PT

ABS SURFACE MOUNTING WALL LOUDSPEAKER

DNH surface mounting self-extinguishing polycarbonate wall loudspeaker

• Power 6 Watt

• 100V transformer

• SPL 1W/1m 85dB

• Dispersion (-6dB) 1kHz/4kHz

140°/100°

• Grey RAL7035 colour

ø 264

WCS 650

CEILING/WALL SPEAKER

ABS ceiling/wall sound speaker

• 10Watt dual cone loudspeaker with 153 g ferrite magnet

• 70V/100V line transformer and loudspeaker with 6,5” cone

• Easy mounting with the supports included

Code

Features

Mounting system

Rated/Maximum power

Colour

Frequency response

Sensitivity 1W/1m

Maximum SPL 1m

Weight

Dimensions (WxHxD)

SAFE 10 PT

09356

IP56 weatherproof and V0 self-extinguishing, with transformer

Screw terminals

10/15W RMS

Grey

150÷20.000Hz

85dB

95dB

0,8 Kg

206x55x104mm

Code

Features

Colour

Frequency response

Sensitivity 1W/1m

Rated/Maximum power

Transformer

DC impedance

Weight

Dimensions

WCS 650

29470

ABS

White

80÷18kHz

93dB

5W / 10W RMS

100V

7,2ohm

1 Kg

ø 264x85mm

210

WSH 1006

CEILING/WALL SPEAKER

Sound speaker with painted metal protective grille

• 6 Watt dual cone loudspeaker with 153 g ferrite magnet

• Mounted horizontally or vertically

• 70V/100V line transformer and loudspeaker with 5.5” cone

• Easy mounting thanks to the hole cover plugs provided

184

184

FPS/505T

ABS SURFACE MOUNTING WALL LOUDSPEAKERS

PVC fl ush mounting wall loudspeaker

• 2-way

• Rated power 20W at 4 Ohm

• Dispersion (-6dB) 1kHz/4kHz

150°/70°

• Power 6 Watt with 100V transformer

• Woofer 5” 1/4 with dome tweeter

• SPL @1W/1m 87dB

• White colour

85

Code

Features

Colour

Frequency response

SPL

Sensitivity 1W/1m

Rated/Maximum power

Transformer

DC impedance

Weight

Dimensions (WxHxD)

WSH 1006

29419

ABS

White

100÷15kHz

98dB at 100V 6W

91dB

3W / 6W RMS

100V

6,8ohm

1,4 Kg

210x320x85mm

Code

Features

Mounting system

Rated/Maximum power (100V)

Colour

Frequency response

Sensitivity 1W/1m

Maximum SPL 1m

Input voltage

Weight

Dimensions (WxHxD)

FPS/505T

35302

Loudspeaker with transformer

Screw fi t

6/8 Watt RMS

Grey

160÷14.000Hz

87dB

96dB

100V

1,1 Kg

184x271x37mm

ø 137

25

53

AQUA 30

LOUDSPEAKER FOR UNDERWATER AND CLEAN ROOM APPLICATIONS

DNH ABS wall or surface mounted loudspeaker for underwater or clean room applications

• IP68 grade of protection

• Rated power 20W at 8 Ohm

• Max/min operating temperature

90 C°/-30°C

• Dispersion (-6dB) 1kHz/4kHz

180°/180°

• SPL 1W/1m 105dB

• White colour

• Guarantees superb audio quality for the reproduction of music and speech in underwater environments, positioned at a max of 2 metres below the water’s surface

ø 165

ø 139 - ø 142

BK 560 CRT

LOUDSPEAKER FOR CLEAN ROOMS

DNH aluminium ceiling loudspeaker with paint fi nish

• Specifi cally designed for use in sterile environments

• Loudspeaker fi tted with special protections to ensure that no dust or airborne particles are generated or affect operation

• Rated power 6W

• Sensitivity 1W/1m 88dB

100V transformer

• Dispersion (-6dB) 1kHz/4kHz

170°/60°

• Grey RAL9010 colour

56

Code

Features

Mounting system

Rated/Maximum power

Colour

Frequency response

Sensitivity 1W/1m

Maximum SPL 1m

Weight

Dimensions

AQUA 30

10436

IP68 watertight

Recessed or on bracket included

20/30 Watt

Blue NCS 1070B

80÷20.000 Hz

105dB

118dB

2,5 Kg

ø 137x53mm

Code

Features

Mounting system

Rated/Maximum power

Colour

Frequency response

Sensitivity 1W/1m

Maximum SPL 1m

Weight

Dimensions

BK 560 CRT

09309

Developed for clean rooms

Spring-clips

6 Watt

White RAL 9010

70÷15.000 Hz

88dB

95dB

1,1 Kg

ø 165x84mm

146 72

IW-100 T

ABS SURFACE MOUNTING CEILING LOUDSPEAKER

ABS surface mounting ceiling loudspeaker

• 2-way with 4” woofer and 1” dome tweeter

• Rated power 1/2/4/7.5/15W RMS with 100V transformer

• Frequency response 60-

20,000Hz, sensitivity @1W/1m of

88dB

• Dispersion (-6dB) 1kHz/4kHz

80°/150°

257 109

IW-200 TCP

ABS SURFACE MOUNTING CEILING LOUDSPEAKER

ABS surface mounting ceiling loudspeaker

• 2-way with 8” woofer

and 1” dome tweeter

• Rated power 1/2/4/7.5/15/30W

RMS

• 100V transformer

• Frequency response

40-20,000Hz, sensitivity @1W/1m of 90dB

• ABS base

• Dispersion (-6dB) 1kHz/4kHz

80°/140°

Code

Rated/Maximum power

Loudspeaker

Frequency response

Sensitivity 1W/1m

Maximum SPL 1m

Input voltage

Weight

Dimensions (WxHxD)

Cut-out diameter

Accessories

RB-100

IW-100 T

17859

1/2/4/7,5/15W RMS

2-way coaxial, 4” woofer with 1” dome tweeter

60÷20.000Hz

88dB

99dB

100V-70V

1,3 Kg

146x220x72mm

195x120mm

surface mounting recess RB100

Surface mounting recess

Code 18159

Surface mounting recess for IW-100T loudspeakers

Code

Rated/Maximum power

Loudspeaker

Frequency response

Sensitivity 1W/1m

Maximum SPL 1m

Input voltage

Weight

Dimensions (WxHxD)

Cut-out diameter

Accessories

RB-200

IW-200 TCP

17862

2/4/7.5/15/30W RMS with transformer

100V with regulator 2-way coaxial,

8” woofer with 1” dome tweeter

40÷20.000Hz

90dB

105dB

100V-70V

3 Kg

257x360x109mm

225x330mm

surface mounting recess RB200

Surface mounting recess

Code 18160

Surface mounting recess for IW-200T loudspeakers

57

MCSL 006 TW MCSL 006 TWP

BUILT-IN SPEAKERS

ABS in-ceiling speaker with metal protection grille

• Colour white RAL9016

• Full range 2,5” dual cone

ABS watertight (IP55) in-ceiling speaker with metal protection grille

• ABS back cover equipped with cable sleeve to ensure good sealing

• Colour white RAL9016

• Full range 4” dual cone

CSL 106/T

BUILT-IN SPEAKERS

CSL 520 TIC

Built-in speaker with painted metal grille

• Colour white RAL9016

• Dual cone loudspeaker with

5” woofer

ABS in-ceiling speaker with metal protection grille

• Metal back cover

• Colour white RAL9016,

• Coaxial loudspeaker with 5” woofer and 1/2” tweeter

• 88dB+/- 3dB sensitivity @1W/1m

• Nominal Power

2,5/5/10/20W/8ohm with

100V/70V line transformer

• Building-in hole 200mm

103

95

140

120

150

150

203

170

58

Code

Features

Rated/Maximum power

Frequency response

Sensitivity 1W/1m

Maximum SPL 1m

Input voltage

Cut-out diameter

Weight

Dimensions

MCSL 006/TW

29425

In-ceiling speaker

ABS body and metal

MCSL 006/TWP

29426 protection grille

1.5/3/6W

120:20.000Hz

87dB

91dB

100V

1.5/3/6W

150:18.000Hz

91dB

95dB

100V

95mm

0,5 Kg

ø 103x80mm

125mm

0,9 Kg

ø 140x130mm

Code

Rated/Maximum power

Frequency response

Sensitivity 1W/1m

Input voltage

Cut-out diameter

Weight

Dimensions

CSL 106/T

29427

3/6W

100:20.000Hz

93dB

100V

150mm

0,5 Kg

ø 150x60mm

CSL 520 TIC

29416

2.5/5/10/20W/8ohm

100:20.000Hz

88dB

100V

170mm

1,8 Kg

ø 203x145mm

CSL 630 TIC

BUILT-IN SPEAKERS

CSL 840 TIC CSL 606 TWP

BUILT-IN SPEAKERS

ABS in-ceiling speaker with metal protection grille

• Metal back cover

• Colour white RAL9016,

• Coaxial loudspeaker with

6” woofer and 1/2” tweeter

• Nominal Power

3.8/7.5/15/30W/8Ohm with

100V/70V line transformer

• 90-20,000Hz frequency response

• 88dB+/- 3dB sensitivity @1W/1m

• Diameter 230x150mm

• Building-in hole 200mm

ABS in-ceiling speaker with metal protection grille

• Colour white RAL9016

• Full range 2.5” dual cone,

• Nominal Power 1.5/3/6W with

100V/70V line transformer

• 120-20,000Hz frequency response

• 87dB+/- 3dB sensitivity @1W/1m

• Diameter 100x80mm

• Building-in hole 950mm

ABS watertight (IP55) in-ceiling speaker

• Plastic printed cone, plastic basket and white RAL 9016 grille

• 5” loudspeaker with coaxial 1” tweeter, water-resistant and resistant to the corrosion due to outdoor mounting

• 70/100V integrated transformer

• Low impedance socket (8ohm)

• Maximum power 45W

230

200

270

240

167

120

Code

Rated/Maximum power

Frequency response

Sensitivity 1W/1m

Input voltage

Cut-out diameter

Weight

Dimensions

CSL 630 TIC

29417

CSL 840 TIC

29418

3.8/7.5/15/30W/8ohm 5/10/20/40W/8ohm

90:20.000Hz 50:20.000Hz

88dB

100V

200mm

2,3 Kg

ø 230x150mm

88dB

100V

240mm

3,1 Kg

ø 270x185mm

Code

Rated/Maximum power

Frequency response

Sensitivity 1W/1m

Input voltage

Cut-out diameter

Weight

Dimensions

CSL 606 TWP

29429

25W/8ohm

95:20.000Hz

90dB

100V

122mm

0,7 Kg

ø 167x115mm

59

DP 10 T DPD 10 T

PLASTIC DNH SOUND PROJECTORS

DNH IP 55 rated sound projector

• Made in anticorrosion polyamide

• Wall or ceiling mounted articulated support

• 10 Watt power

• 100V line transformer

• Maximum/minimum operating temperature 150 C°/-40°C

• SPL 1W/1m 96dB

• Dispersion (-6dB) 1kHz/4kHz

110°/40°

DNH IP 55 rated sound projector

• Made in anticorrosion polyamide

• Articulated support

• Wall or ceiling mounted

• 10 Watt power

• 100 V line transformer

• Maximum/minimum operating temperature 150 C°/-40°C

• SPL 1W/1m 94dB

• Dispersion (-6dB) 1kHz/4kHz

110°/40° bidirectional

210 210

ø 146

220

312

175

CAR 6 FT

DNH FIRE RESISTANT SOUND PROJECTORS

DNH bi-directional loudspeaker

• Anodised aluminium or white

• NEMKO certifi ed fi re resistant at 150°C for 24 hours, at 750° for

30 minutes

• Power 6 Watt

• 100V transformer

• Max/min operating temperature

150 C°/-40°C

• SPL 1W/1m 92dB

• Dispersion (-6dB)

1kHz/4kHz 150°/150°

60

Code

Features

Mounting system

Rated/Maximum power

Colour

Frequency response

Angular dispersion

Sensitivity 1W/1m

Maximum SPL 1m

Input voltage

Operating temperature

Weight

Accessories of the kit

Dimensions (WxHxD)

DP 10 T

09352

DPD 10 T

11818

Watertight IP55 Watertight IP56

Bidirectional

Bracket

10/15 Watt

Bracket

10/15 Watt

Light grey Light grey

RAL 7035

150÷15.000 Hz

RAL 7035

150÷15.000 Hz

110°/40°

96dB

105dB

110°/40° bidirectional

94dB

103dB

100 Volt 100 Volt da -40°C a 150°C da -40°C a 150°C

2,7 Kg

Bracket

3,7 Kg

Bracket

210x150x312mm 210x150x445mm

Code

Features

Mounting system

Rated/Maximum power

Colour

Frequency response

Sensitivity 1W/1m

Maximum SPL 1m

Input voltage

Operating temperature

Weight

Dimensions

CAR 6 FT

11956

Bi-directional fi re-resistant with transformer

Bracket

6/8 Watt

Aluminium/anodised

150÷15.000Hz

92dB

99dB

100 Volt da -40°C a 150°C

2,2Kg

ø145x175mm

45

145

26 174

CAD 20 T

ABS SOUND PROJECTORS

ABS Sound projector watertight

• In-built UV protection IP55

• Aluminium U bracket

• Dual cone polypropylene speaker

• Power 20 Watt

• 100V transformer

• Max/min operating temperature

85 C°/-20°C

• SPL 1W/1m 92dB

• Dispersion (-10dB)

1kHz/4kHz 180°/70°

SP 115 WP SP 115 B/WP

ABS SOUND PROJECTORS

IP44 Weatherproof ABS sound projector

• Power 1.5/3/6W

• 50/70/100V transformer

• Complete with steel bracket

• 5.5” plastic loudspeaker

• Frequency response 150-20kHz

• Max/min operating temperature

85 C°/-20°C

[email protected]/1m 94dB

• Dispersion (-10dB) 1kHz/4kHz

150°/50°

IP44 Weatherproof ABS sound projector

• Power 1.5/3/6W

• 50/70/100V transformer

• Complete with stainless steel bracket

• 5.5” plastic loudspeaker

• Frequency response 150-20kHz

• Max/min operating temperature

85 C°/-20°C

[email protected]/1m 94dB

• Dispersion (-10dB) 1kHz/4kHz

150°/50°

ø 150

196,5

Code

Features

Mounting system

Rated/Maximum power

Colour

Frequency response

Sensitivity 1W/1m

Maximum SPL 1m

Input voltage

Operating temperature

Weight

Dimensions

CAD 20 T

11469

Dual cone loudspeaker with transformer

Stainless steel U bracket

20 Watt

White

110÷18.000 Hz

92dB

105dB

100/70 Volt da -20°C a 85°C

1,9 Kg

ø 138x200mm

Code

Features

Mounting system

Rated/Maximum/Power

Colour

Frequency response

Sensitivity 1W/1m

Maximum SPL 1m

Input voltage

Operating temperature

Weight

Dimensions

SP 115 WP

37636

SP 115 B/WP

37637

IP44 Weatherproof Bi-directional

sound projector IP44 Weatherproof

Stainless steel

sound projector

Stainless steel

U bracket U bracket

6 Watt, 3 Watt, 6 Watt, 3 Watt,

1,5 Watt 1,5 Watt

White

150-20 kHz

94dB

101dB

White

150-20 kHz

94dB

101dB

100/70/50 Volt 100/70/50 Volt da 85°C a -20°C da 85°C a -20°C

2,2 Kg 2,2 Kg

ø 150x196,5mm ø 150x196,5mm

61

CESL 10T CESL 20T CESL 10T BIDI

ALUMINIUM SOUND PROJECTORS

Watertight (IP55) sound projector

• White RAL9016 painted aluminium

• Polypropylene dual cone loudspeaker

• 10/5/2.5/1.25 Watt power

• 100V Transformer

• Maximum/ minimum operating temperature

85 C°/-20 C°

• SPL 1W/1m 91dB

• Dispersion (-10dB)

1kHz/8kHz 150°/50°

Watertight (IP55) sound projector

• White RAL9016 painted aluminium

• Polypropylene dual cone loudspeaker

• 20/10/5Watt power

• 100V Transformer

• Maximum/ minimum operating temperature

85 C°/-20 C°

• SPL 1W/1m 92dB

• Dispersion (-10dB)

1kHz/8kHz 150°/50°

Watertight (IP55) sound projector

• White RAL9016 painted aluminium

• Polypropylene dual cone loudspeaker

• 10/5/2.5 Watt power

• 100V Transformer

• Maximum/ minimum operating temperature

85 C°/-20 C°

• SPL [email protected] 5W

• Dispersion (-6dB)

1kHz/160° 110°/40° for each direction

ø 254

GB 820/T

SPHERICAL SPEAKER

ABS IP55-rated spherical speaker to be mounted on the ceiling, ideal for large area coverage

• Coaxial 8” speaker playing both voice and music, extremely clear voice play

• 360° horizontal and 140° vertical dispersion

• 20 Watt power

• 100V Transformer

• Equipped with 5 m cable

Code

Rated/Maximum power

Frequency response

Sensitivity 1W/1m

Input voltage

Weight

Dimensions

CESL 10T

29420

CESL 20T

29421

CESL 10T BIDI

29429

10/5/2,5/1,25W 20/10/5W 10/5/2,5W

130Hz:15.000Hz 110Hz:15.000Hz 130Hz:15.000Hz

91dB

100V

92dB

100V

91dB

100V

2,2 Kg 2,8 Kg 2,8 Kg

ø 138x205mm ø 170x252mm ø 138x205mm

Code

Rated/Maximum power

Frequency response

Sensitivity 1W/1m

Maximum SPL 1m

Input voltage

Weight

Dimensions

GB 820/T

29430

20W/10W/5W

160Hz:12.500Hz

93dB

106dB

100V

2,2Kg

ø 254mm

362

300

MHS 50T

MUSIC HORN

ABS and polypropylene watertight (IP66) two-way DNH music horn

• Wide frequency-response and wide dispersion angle

• Stainless steel adjustable bracket, ABS light grey body treated to be resistant to sunlight

• Sealed with silicone gasket

• 50Watt power with 100V transformer

330

347

HS 50T

HORN

ABS watertight (IP66) two-way music horn

• 100V line transformer and driver

• High-pass fi lter for driver protection, suitable for internal and external environments with temperature between -25°C e

+70°C

• Colour white RAL7035

• Stainless steel bracket

• Double insulation

Code

Rated/Maximum power

Colour

Frequency response

Sensitivity 1W/1m

Weight

Dimensions (WxHxD)

MHS 50T

29431

50W

Light Grey RAL 7035

90-20.000Hz

99dB

3,9 Kg

362x315x300mm

Code

Rated/Maximum power

Colour

Frequency response

Sensitivity 1W/1m

Maximum SPL 1m

Input voltage

Operating temperature

Weight

Dimensions

HS 50T

29422

50W

Light Gray RAL 7035

380-6.500Hz

109dB

126dB

100Volt from 85°C to -20°C

2,3 Kg

ø 330x347mm

63

PH 10 T

ABS HORN LOUDSPEAKERS

PH 20 T

IP 66 weatherproof circular horn loudspeaker in ABS

• RAL 7035 light grey colour

• Stainless steel U bracket

• Power 10/5/2,5/1,25 Watt

• 100V transformer

• Max/min operating temperature

85 C°/-20°C

• SPL 1W/1m 106dB

• Dispersion (-10dB) 1kHz/4kHz

180°/70°

IP 66 weatherproof circular horn loudspeaker in ABS

• RAL 7035 light grey colour

• Stainless steel U bracket

• Power 10/5/2,5/2.5 Watt

• 100V transformer

• Max/min operating temperature

85 C°/-20°C

• SPL 1W/1m 108dB

• Dispersion (-10dB) 1kHz/4kHz

180°/60°

105

20

95

200

120

109,5

254

135

118

287

PH 30 T

ABS HORN LOUDSPEAKERS

IP 66 weatherproof circular horn loudspeaker in ABS

• RAL 7035 light grey colour

• Stainless steel U bracket

• Power 30/15/7.5/3.75 Watt

• 100V transformer

• SPL 1W/1m 110dB

• Dispersion (-10dB) 1kHz/4kHz

180°/60°

64

Code

Features

Mounting system

Rated/Maximum power

Colour

Frequency response

Sensitivity 1W/1m

Maximum SPL 1m

Input voltage

Operating temperature

Weight

Dimensions

PH 10 T

11474

PH 20 T

11475

Plastic, weatherproof Plastic, weatherproof

and UV protection and UV protection with transformer with transformer

U Bracket U Bracket

10 Watt

Light Grey

RAL 7035

20 Watt

Light Grey

RAL 7035

400÷8.000 KHz

106dB

116dB

100/70 Volt

350÷8.000 KHz

108dB

121dB

100/70 Volt da -20°C a 85°C da -20°C a 85°C

1,3 Kg 1,9 Kg

ø 138x200mm ø 203x254mm

Code

Features

Mounting system

Rated/Maximum power

Colour

Frequency response

Sensitivity 1W/1m

Maximum SPL 1m

Input voltage

Operating temperature

Weight

Dimensions

PH 30 T

10446

Plastic, weatherproof and UV protection

with transformer

U Bracket

30 Watt

Light Grey RAL 7035

330÷8.000 KHz

110dB

124dB

100/70 Volt da -20°C a 85°C

2,1 Kg

ø 238x287mm

LOUDSPEAKER CABINETS

SOUND COLUMN SPEAKERS

OUTDOOR SPEAKERS

Sound Design Project for Pasaron Stadium

Pontevedra - Spagna

65

EN 54 - 24

VERTUS DLA 1244A VERTUS DLA 804A VERTUS CLA

DIGITAL CONTROL ACTIVE LINE ARRAY PASSIVE COLUMN LINE ARRAY

• Perfect for the reproduction of high-quality speech/vocal application in reverberant environments, it can be used also for sound reinforcement as well as for fi xed installations

• Possibility of stacking on a subwoofer from the MITUS range through the optional mounting accessory and of wall-mount installation with the supplied bars

• Standard white fi nish RAL 9016

• 16 x 50W RMS - 126dB SPL

• 2-way active column line array with digital beam steering technology

• 12 x 100mm (4”) full-range custom speakers with 25mm (1”) voice coil

• 4 x 25mm (1”) dome neodymium tweeter on waveguides

• Frequency response from 100Hz to 20kHz

• 16 x 50W RMS power amplifi ers in Class D with switching mode power supply for a total of 800 W

RMS

• the 2 way system design allows a high-quality full-range reproduction of the musical signal

• 8 x 50W RMS - 123dB SPL

• Active column line array with digital beam steering technology

• 8 x 100mm (4”) full-range custom speakers with 25mm

(1”) voice coil

• Frequency response from 120Hz to 10kHz

• 8 x 50W RMS power amplifi ers in Class D with switching mode power supply for a total power of 400 W RMS

• 500W 8ohm 123dB SPL

• 2-way passive column line array

• 6 x 100mm (4”) custom woofer with 25mm (1”) voice coil

• 4 x 25mm (1”) dome neodymium tweeter on a waveguide

• Frequency response from 130Hz to 20kHz

• 100V transformer with 2 levels of power, 100 and 200W

• 100°H x 20°V dispersion

• 4-pole Euroblock input connector: 8ohm - 100W/100V -

200W/100V

• Extruded-aluminum powdercoated cabinets

• Wall-mount installation bars are supplied

• Expandable line array by adding

CLA604 modules in order to increase SPL and reduce the vertical radiation lobe width

• Ideal for fi xed installation in reverberant environments, it can improve both music and voice intelligibility by improving direct/refl ected sound quality

66

Code

Confi guration

Built-in amplifi er cont. rms

LF/HF

Built-in amplifi er max. rms

LF/HF

DLA 1244A

36187

16 way

16 x 40 W

16 x 50 W

DLA 804A

36186

8 way

8 x 40 W

8 x 50 W

Built-in amplifi er max. peak LF/HF

16 x 100 W 8 x 100 W

Frequency response

Low frequency woofer

100Hz - 20KHz @-6dB

12 x 4 - 1 coil

120Hz - 20KHz @-6dB

8 x 4 - 1 coil

High frequency driver 4 x 1 - 1 coil - neodymium -

Maximum SPL cont/peak 123 / 126 dB 120 / 123 dB

Dispersion HxV

Steering Angle

100° x Digital Controlled 100° x Digital Controlled

+30 / -30V +30 / -30V

Beamwidth Angle

Input impedance

Crossover frequency

10 / 40V

22 kOhm

3 kHz

AC Power requirements 650 VA

10 / 40V

22 kOhm

3 kHz

400 VA

Input connectors

Power cord

Euroblock with loop and

SUB OUT

5 / 16.4 mm/inch

Euroblock with loop and

SUB OUT

5 / 16.4 mm/inch

130x965x131 mm

5.11x38x5.15 inch

22 / 48,5 kg/lb Net weight

Transport dimensions(WxHxD)

Transport weight

5 / 16.4 kg/lb

220x1760x220 mm

8.66x69.29x8.66 inch

13 / 28,6 kg/lb

220x1040x220 mm

8.66x40.94x8.66 inch

25 / 55 kg/lb

Code

Confi guration

Recommended amplifi er

Long term power

Short term power IEC 268-5

Transformer

Nominal impedance

Frequency response

Low frequency woofer

High frequency driver

Sensitivity (@1W/1m)

Maximum SPL cont/peak (Bi-Amp)

Dispersion HxV

Crossover frequency

Recommended HP fi lter

Input connectors

Net dimensions (WxHxD)

Net weight

Transport dimensions(WxHxD)

Transport weight

CLA 604

36145

2 way

500 W rms

250 W

1000 W

100 / 200 V/W

8 Ohm

100Hz - 20KHz @-6dB

6 x 4 - 1 coil

4 x 1 - 1 coil - neodymium

93 dB

120 / 123 dB

100° x 20°

3 kHz

80hz - 24dboct

4 x Euroblock

130x841x130 mm

5.12x33.1x5.12 inch

8/17,6 kg/lb

170x900x170 mm

6.7x35.4x6.7 inch

10/22 kg/lb

MSP 420 TW/EN

SOUND PROJECTORS

EN 54 - 24

Aluminium alloy housing and hot galvanised steel front grille.

Due to its very sturdy and waterproof construction it is specially designed for industrial halls, warehouses, as well as open spaces exposed to outdoor weather conditions. Equipped with broadband loudspeaker to ensure excellent sound reproduction, adjustable sliding mounting bracket and a line transformer 100/70/50 V to set power output 20- 10-5 W. The

MSP 420 0TW/EN loudspeakers include a thermal fuse which excludes the speaker in case of overheating and a fl ame resistant connecting cable (80 cm long).

SOP 412 T/EN

EN 54 - 24

SOUND PROJECTORS

SOP 426 TB/EN

Thanks to use of excellent wide band loudspeakers, the

SOP 412 T/EN and SOP 426 TB/EN units prove to be suitable for both music and speech applications.

The loudspeakers are enclosed in white cylindrical casings made of V0 self-extinguishing ABS

(UL94-V0) and equipped with adjustable swivelling bracket for easy installation, wall or ceiling.

Designed to achieve directional characteristic of sound emission they are mostly applied on circulation routes, corridors and in the wide areas.

Each models include a line transformer, a thermal fuse which excludes the speaker in case of overheating and a fl ame resistant connecting cable (80 cm long).

Code

Rated power

Adjustable power

Material

Loudspeakers

Sound press.

SPL Pnom/1m

Sensivity 1W/1m

Frequency response

Dispersion angle @2kHz

Protection degree

Installation

Colour

Dimensions (W x H x D)

Weight

MSP 420 TW/EN

37734

20 W

20 / 10 / 5 W

Aluminium, galvanised steel front grill

1 broadband

103 dB

90 dB

150 ÷ 15.000 Hz

90°

IP 65

Adjustable brackets and fi re resistant cable included silver, black grill

180 x 145 x 178 mm

2,4 kg

Code

Rated power

Adjustable power

Material

Loudspeakers

Sound press.

SPL Pnom/1m

SOP 412 T/EN

37733

12 W

12 / 6 / 3 W

ABS UL94-V0

1 broadband

99 dB

Sensivity 1W/1m

Frequency response

89 dB

180 ÷ 15.000 Hz

Dispersion angle @2kHz 160°

Protection degree IP 44

Installation

Adjustable swivelling bracket and fi re resistant cable included

Colour white

Dimensions (W x H x D) Ø 140 x 207 mm

Weight 1,4 kg

SOP 426 TB/EN

37732

12 W + 6 W

12 / 6 / 3 W

ABS UL94-V0

2 broadband

96 dB

89 dB

170 ÷ 12.000 Hz

140°

IP 44

Adjustable swivelling bracket and fi re resistant cable included white

Ø 140 x 207 mm

1,85 kg

67

WMS 406 T/EN

WALL-MOUNTING SPEAKERS

EN 54 - 24

WMS 406 T/EN loudspeakers have been designed as surface or ceilingmounted units for a wide area of applications.

Thanks to their steel casings the loudspeakers are tough to vandals and more resistant to any and all mechanical damages. They are equipped with ceramic terminal block and thermal fuse that ensure continuous operations of sound transmitting line connected with the loudspeaker even in the case the latter is damaged or burnt as a result of fi re.

WSP 406 T/EN

WALL-MOUNTING SPEAKERS

EN 54 - 24

The WSP 406 T/EN speakers, with elegant and discrete design, are specifi cally aimed at schools, hospitals, waiting rooms, hotels, where both music and speech have to be heard by customers.

Can be mounted in any position on a wall or ceiling. Selfextinguishing ABS (UL94-V0) body with metal front grille. Ceramic bloc

68

Code

Rated power

Adjustable power

Material

Loudspeakers

Sound press. SPL Pnom/1m

Sensivity 1W/1m

Frequency response

Dispersion angle @2kHz

Installation

Color

Dimensions (W x H x D)

Weight

WMS 406 T/EN

37730

6 W

6 / 3 / 1,5 W metal

1 broadband

98 dB

91 dB

120 ÷ 15.000 Hz

130°

Wall and ceiling with screw white

210 x 190 x 70 mm

1,6 kg

Code

Rated power

Adjustable power

Material

Loudspeakers

Sound press. SPL Pnom/1m

Sensivity 1W/1m

Frequency response

Dispersion angle @2kHz

Installation

Color

Dimensions (W x H x D)

Weight

WSP 406 T/EN

37729

6 W

6 / 3 / 1,5 W

ABS UL94-V0, metal grille

1 broadband

96 dB

89 dB

150 ÷ 10.000 Hz

150°

Wall and ceiling with screw white

258 x 169 x 72 mm

0,8 kg

CSP 406 T/EN

EN 54 - 24

CEILING SPEAKERS

CSP 412 T/EN

EN 54 - 24

RWS 412 T/EN

FLUSH-MOUNTING WALL/CEILING SPEAKERS

The CSP 406 T/EN and CSP 412

T/EN speaker units, suitable for mounting in false ceilings, ensure excellent reproduction of both speech and music. Made of stamped metal sheeting treated with white scratchproof and non-refl ecting paint, they will fi t elegantly into any environment.

Each unit consists of a loadbearing ring with quick-fi tting hooks with springs for easy securing to the ceiling. The central mask with the loudspeaker cabled to the line transformer fi ts into the ring with a handy turning movement. According to the specifi cation of the EN 54-24 voice evacuation system, this range of speakers has a double-galvanized steel fl ameproof cap, combined with ceramic input/output terminal strips, a thermal fuse and a ground termination. The built-in transformer enables connection to constant-voltage lines at 100,

70 and 50V with the adjustable outputs.

The ideal applications for RWS

412 T/EN speaker units are in hospitals, hotels, offi ces, schools, shops and whenever fl ush-mounting with a discreet and elegant aesthetic impact is required. Made of selfextinguishing plastic material to UL94-V0 with a front metal grille, they are available with a line transformer. Ceramic block and temperature limit fuse are installed inside the loudspeaker.

A metal box for fl ush mounting enables easy and rapid wall or ceiling mounting.

Code

Rated power

Adjustable power

Material

CSP 406 T/EN

37727

6 W

6 / 3 / 1,5 W metal

Loudspeakers

Sound press. SPL

1 dual cone broadband

Pnom/1m

Sensivity 1W/1m

99 dB

92 dB

Frequency response 100 ÷ 15.000 Hz

Dispersion angle @2kHz 150°

Mounting

Installation hole spring fi xing system

Ø 160 ÷ 165 mm

Colour white

Dimensions (W x H x D) Ø 180 x 120 mm

Weight 1,5 kg

CSP 412 T/EN

37728

12 W

12/ 6 / 3 W metal

1 dual cone broadband

105 dB

95 dB

80 ÷ 20.000 Hz

130° spring fi xing system

Ø 200 ÷ 205 mm white

Ø 220 x 140 mm

1,7 kg

Code

Rated power

Adjustable power

Material

Loudspeakers

Sound press. SPL Pnom/1m

Sensivity 1W/1m

Frequency response

Dispersion angle @2kHz

Installation hole

Colour

Dimensions (W x H x D)

Weight

RWS 412 T/EN

37731

12 W

12 / 6 / 3 W

ABS UL94-V0, metal grille

1 broadband

99 dB

89 dB

150 ÷ 15.000 Hz

120°

Box for fl ush mounting wall/ceiling white

165 x 280 x 90 mm

2 kg

69

MHO 420 TW/EN

HORN SPEAKERS

EN 54 - 24

The MHO 420 TW/EN horn type speaker units are particularly well suited for outdoor use, even in diffi cult weather conditions.

They feature a watertight construction and a high level of weatherproofi ng.

The body is made of die-cast aluminium while the screws and brackets are made of stainless steel. The horn is made of aluminium sheeting. Each model has a line transformer and a rear switch for selecting the operating output (5 steps).

The MHO 420 TW/EN has been designed to be used in security installations and has a thermal fuse which excludes the speaker in case of overheating, a ground connector and a fl ame resistant connecting cable (80 cm long).

70

Code

Rated power

Adjustable power

Material

Loudspeakers

Sound press. SPL Pnom/1m

Sensivity 1W/1m

Frequency response

Dispersion angle @2kHz

Protection degree

Installation

Colour

Dimensions (W x H x D)

Weight

MHO 420 TW/EN

37735

20 W

20 / 15 / 10 / 5 / 2.5 W

Aluminium

Complete with driver unit

123 dB

110 dB

160 ÷ 10.000 Hz

80°

IP 65

Adjustable brackets and fi re resistant cable included

Light grey

Ø 213x230 mm

1,8 kg

STYLE A40 STYLE P80

LOUDSPEAKER CABINETS

STYLE S80

The new series of STYLE sound speakers combines high quality sound play with innovative design, creating a new concept and a catching look that are able to satisfy several architectural needs.

The sound speaker shall no more be hidden, with the risk of affecting the sound quality.

Instead, it will be integrated in the environment, combining form and function, acoustics and integration in the environment.

The nature itself has inspired this loudspeaker: in the nature the sound spreads to all directions, and, hence, we have developed a speaker that could reproduce a natural sound feeling. The sound diffusion in the nature is 360°, whereas in standard speakers its propagation is conic-shaped and, hence, has a narrow angle.

Thanks to the conic-shape of the diaphragm, STYLE sound speakers provide a 360° sound diffusion, reaching even the highest frequencies. The sound diffusion spreads to all directions, keeping the sound natural and accurate even when the volume is very high.

Thanks to this new technology you will immediately forget the geometric diffusion you are used to and you will be able to recreate a holographic and threedimensional sound effect in any environment.

Moreover, thanks to the material

Style speakers are made of and to the aluminium loudspeaker, they are suitable for outdoor mounting and resist to various weather conditions.

• 360° even sound diffusion

• Even sound diffusion over a wide frequency range (120 Hz ÷

20KHz) to all directions

• They can be powered using standard amplifi ers

• The listening position is not bound by the orientation towards the axis

STYLE A40

• Perfect both for high-fi delity systems and for sound diffusion in environments such as train stations, airports, restaurants, shopping centres etc.

• Full end even sound energy pressure everywhere in the environment

• High sound effi ciency

STYLE P80

• Excellent results with reference to the Larsen effect thanks to the sound energy that is reduced to one fourth towards the microphone

• Low intermodulation

• Low second harmonic distortion

• Classic modern design, perfect for any environment

STYLE S80

Customization is possible upon request

TR-20

Switching unit

Cod. 31011

Code

Type

System

Enclosure

STYLE A40

31150

Ceiling mounted

One way system

Palstic fl ange

(Duroplast)

STYLE P80

31151

Suspending mounted

One way system

Plastic fl ange

(Duroplast)

STYLE S80

31152

Wall hanging speaker

One way system

Plastic material

(PC+ABS+Duroplast Fenol)

Colour

Driver equipment

White RAL 9010 matte White RAL 9010 matte White RAL 9010 matte

1x FDS 100/40 ALU Sonus/NewTec 1 x FDS 100/40 ALU Sonus/NewTec 1x FDS 100/40 ALU Sonus/NewTec

Nom. Imp. / DC Widerstand 8 / 6,2

Nominal / Music Power

8 / 6,2

40 Watt RMS / 90 Watt Music power 80 Watt / 165 Watt

8 / 6,2

80 Watt / 165 Watt

Sensitivity ([email protected] 2,[email protected]) 86,4dB (+6dB auf 360°)

Maximum SPL 104dB (active high pass

Frequency response

120Hz/18dB - Oktave)

105 - 20.000 Hz (+/-3dB)

Connectors Press-Terminal

Net weight (only the loutspeaker) 470gr

Gross weight ( inc. Package) 720gr

Dimensions ø 180x15mm

Accessories

Nominal Power 100V

Maximum SPL 100V

86,4dB (+6dB auf 360°)

104dB (active high pass

120 Hz / 18dB - Oktave)

105 - 20.000 Hz (+/-3dB)

Press-Terminal

830gr

1170gr

86,4dB (+6dB auf 360°)

104dB (active high pass

120 Hz / 18dB - Oktave)

100 - 20.000 Hz (+/-3dB)

Screw-terminal

1160gr

1530gr

ø 134x135mm + cab. stand. lenght 1mt - ø 134x130x220mm installation depth 35mm

TR-20 Code 31011

Deckendose (Baldachin) Höhe 72mm, ø60

TR-20 Code 31011 TR-20 Code 31011

Deckendose (Baldachin) Höhe transformer 5 pole print-terminal transformer 5 pole print-terminal

100Volt / 2000 - 250 100Volt / 2000 - 250 100Volt / 2000 - 250

2,5-5-10-20 Watt

101,5dB

2,5-5-10-20 Watt

101,5dB

2,5-5-10-20 Watt

101,5dB

71

143 162

PROJECT 315 PROJECT 320

LOUDSPEAKER CABINETS

Grey RAL 7035 or black RAL 9005

ABS loudspeaker

• Bracket included

• 2 way bass refl ex

• 3.5” woofer and 0.5” tweeter

• 100V line transformer (Multi

Tapp)

• Frequency response @-10dB is

100Hz-15kHz

• Dispersion HxV 120°x120°

• High-pass fi lter recommended

70Hz-24dB/oct

• 8-piece multiple packing

• 15W/30W nominal/maximum power

• Setting 2/4/7.5/15W/8ohm

• Sensitivity 85dB

• Max SPL 100dB

Grey RAL 7035 or black RAL 9005

ABS loudspeaker

It has the same characteristics as the 315 version, with the following features:

• 20W/40W nominal/maximum power

• Setting 4/8/15/20W/8ohm

• Sensitivity 87dB

• Max SPL 103Db

72

Wall bracket manufactured from die-cast aluminium with ball/socket multi angle adjustment capability and steel security cable.

Code

Confi guration

Recommended amplifi er

Long term power

Short term power

Line transformer (100V)

Nominal impedance

Frequency response @-10dB

Low frequency woofer

Tweeter

Sensitivity (@1W,1m)

Max. Spl

Dispersion

Recommended hp fi lter

Input connector

Dimensions

(WxHxD)

Project 315 BT / WHT

29350 / 32372

2 way

30W rms

15W

60W

1-2-4-7,5-15W

8ohm

100Hz-15kHz

88mm

13mm

85dB

100dB

120x120 HxV

70Hz-24dB/oct

Euroblock

143x204x162mm

Project 315 WHT

Project 320 WHT

Project 320 BT / WHT

29221 / 32367

2 way

40W rms

20W

80W

4-8-15-20W

8ohm

100Hz-20kHz

88mm

13mm

87dB

103dB

120x120 HxV

70Hz-24dB/oct

Euroblock

143x204x162mm

Project 315 BT

Project 320 BT

168 180

PROJECT 530 PROJECT 550

LOUDSPEAKER CABINETS

Grey RAL 7035 or black RAL 9005

ABS loudspeaker

• Bracket included

• Grey or black ABS loudspeaker

• 2 way bass refl ex

• 5” woofer and 0.75” tweeter

• 100V line transformer(Multi Tapp)

• Frequency response @-10dB

85Hz-20kHz

• Dispersion HxV 100°x100°

• High-pass fi lter recommended

55Hz-24dB/oct

• 30W/60W nominal/maximum power

• Setting 10/15/20/30W/8ohm

• Sensitivity 87.5dB

• Max SPL 106dB

Grey RAL 7035 or black RAL 9005

ABS loudspeaker

It has the same characteristics as the 530 version, with the following differing features:

• 50W/100W nominal/maximum power

• Setting: 15/25/40/50W/8ohm

• Sensitivity 89dB

• Max SPL 109Db

Wall bracket manufactured from die-cast aluminium with ball/socket multi angle adjustment capability and steel security cable.

Code

Confi guration

Recommended amplifi er

Long term power

Short term power

Line transformer (100V)

Nominal impedance

Frequency response @-10dB

Low frequency woofer

Tweeter

Sensitivity (@1W,1m)

Max. Spl

Dispersion

Recommended hp fi lter

Input connector

Dimensions (WxHxD)

Project 530 BT / WHT

29223 / 32368

2 way

60W rms

30W

120W

10-15-20-30W

8ohm

85Hz-20kHz

130mm

20mm

87,5dB

106dB

100x100 HxV

55Hz-24dB/oct

Euroblock

168x240x180mm

Project 530 WHT

Project 530 WHT

Project 550 BT / WHT

29225 / 32369

2 way

100W rms

50W

200W

15-25-40-50W

8ohm

80Hz-20kHz

130mm

25mm

89dB

109dB

100x100 HxV

50Hz-24dB/oct

Euroblock

168x240x180mm

Project 550 BT

Project 550 BT

73

218 219

PROJECT 640

LOUDSPEAKER CABINETS

PROJECT 660

Black RAL 9005 or Grey RAL 7035

ABS loudspeaker

• Bracket included

• 2 way bass refl ex

• 6.5” woofer and 1” tweeter

• 100V line transformer(multi Tapp)

• Frequency response @-10dB

70Hz-20kHz

• Dispersion HxV 90°x90°

• High-pass fi lter recommended

40Hz-24dB/oct

• 4-piece multiple packing

• 40W/80W nominal/maximum power

• Setting 10/20/30/40/8ohm

• Sensitivity 89dB

• Max SPL 108dB

Black RAL 9005 or Grey RAL 7035

ABS loudspeaker

It has the same characteristics as the 640 version, with the following differing features:

• 60W/120W nominal/maximum power

• Setting 15/30/45/60W/8ohm

• Sensitivity 90dB

• Max SPL 111dB

74

Wall bracket manufactured from die-cast aluminium with ball/socket multi angle adjustment capability and steel security cable.

Code

Confi guration

Recommended amplifi er

Long term power

Short term power

Line transformer (100V)

Nominal impedance

Frequency response @-10dB

Low frequency woofer

Tweeter

Sensitivity (@1W,1m)

Max. Spl

Dispersion

Recommended hp fi lter

Input connector

Dimensions (WxHxD)

Project 640 BT / WHT

29227 / 32370

2 way

80W rms

40W

160W

10-20-30-40W

8ohm

70Hz-20kHz

165mm

25mm

89dB

108dB

90x90 HxV

40Hz-24dB/oct

Euroblock

218x312x219mm

Project 640 WHT

Project 660 WHT

Project 640 BT

Project 660 BT

Project 660 BT / WHT

29229 / 32371

2 way

120W rms

60W

240W

15-30-45-60W

8ohm

70Hz-20kHz

165mm

25mm

90dB

111dB

90x90 HxV

40Hz-24dB/oct

Euroblock

218x312x219mm

360m m

PROJECT Sub 1180A

AMPLIFIED SUBWOOFER

Amplifi ed subwoofer

• Black or grey colour wooden construction

• 1 way bass refl ex

• 180W rms internal amplifi er

• 4 ohm nominal impedance

• Frequency response

@-10dB 28Hz-180Hz

• Sensitivity 90dB

• Max SPL 112dB

• Dispersion HxV omnidirectional

• RCA input and output connector

• Crossover frequency and volume control

Code

Confi guration

Internal amplifi er

Frequency response @-10dB

Low frequency woofer

Sensitivity (@1W,1m)

Max. Spl

Dispersion

Input connector

Power consumption

Dimensions (WxHxD)

Project Sub 1180A

29351

1 way

180W rms

28Hz-180kHz

250mm

90dB

112dB omnidirectional

2 x RCA

200Va

360x450x360mm

75

STUDIO.PRO 9 STUDIO.PRO 9 T

LOUDSPEAKER CABINETS

STUDIO.PRO 9 A

Loudspeaker cabinets

• Extremely light and sturdy enclosure made of gas injection moulded polypropylene, black (STUDIO.

PRO 9B) or RAL 7035 grey colour

(STUDIO.PRO 9W), stand adapter,

2 M6 anchoring points

• 2-way bass-refl ex system with

130mm woofer and 25mm high frequency tweeter

• Power 120 Watt

• Frequency response 80Hz-20 kHz

• Sensitivity 95.5dB 1W/1m Maximum

SPL 116.5dB

• Dispersion (HxV) 90°x60°

• SUB-D input connectors

Speaker cabinets

Same characteristics as the

STUDIO.PRO 9B/W models except for the following:

• Power 80W

• 70-100V 4-position line transformers: 5W/20W/45W/80W

• Sensitivity 95.5dB 1W/1m

Maximum SPL 114.5dB

Loudspeaker cabinet

Same characteristics as the STUDIO.

PRO 9B/W models except for the following:

• 80W RMS internal amplifi ers for the woofer and 20W RMS for the driver

• ADAP® (Advanced Dynamic

Active Protection) designed to limit amplifi er saturation and ensure complete reliability of the system even in extreme conditions; 24dB/ oct active fi lters

• Frequency response 70Hz-20 kHz

• Sensitivity 95dB 1W/1m

• Maximum SPL 115dB

• Control panel with Ground Lift,

Combo XLR/JACK inputs, XLR male output, limiter, volume control

76

SJ 9 B/W

SJ 9 UB/UW

Adjustable wall support

Model Code

SJ 9 B 19706

SJ 9 W 19705

Colour black

RAL 7035 grey

Wall mounting brackets

Model Code

SJ 9 UB 19708

SJ 9 UW 19707

Colour black

RAL 7035 grey

ST 20 B

Adjustable fl oor stand

Code 19710

Adjustable metal fl oor stand, with safety locking device, max weigh 55 kg

Code

Colour

Confi guration

Recommended amplifi er

STUDIO.PRO 9 B/W

19678 / 19677

black - RAL 7035 grey

2 way

120W rms

Internal amplifi er

Long term power (AES)

-

60W

Short term power (IEC 268-5) 240W

Nominal impedance 8ohm

Line transformer -

Frequency response (@-6dB) 80Hz - 20kHz

Low frequency woofer 1x200

ø 38 mm coil

High frequency woofer

Sensitivity 1W/1m

Max. SPL 1m

Dispersion

Crossover frequency

Recommended hp fi lter

Input connectors

Weight

Dimensions (WxHxD)

1xTweeter+horn

ø 20 mm coil

95,5dB

116,5dB

90°x60° HxV

3,5 kHz

60Hz 24dB oct

spring terminals

4,8 kg

255x415x245mm

STUDIO.PRO 9 BT/WT

19680 / 19679

black - RAL 7035 grey

2 way

80W rms

-

-

-

-

70V-100V

80Hz - 20kHz

1x200

ø 38 mm coil

1xTweeter+horn

ø 20 mm coil

95,5dB

114,5dB

90°x60° HxV

3,5 kHz

60Hz 24dB oct

spring terminals

4,8 kg

255x415x245mm

STUDIO.PRO 9 BA

19681

black

-

2 way

-

-

-

80W + 20W

-

70Hz - 20kHz

1x200

ø 38 mm coil

1xTweeter+horn

ø 20 mm coil

95dB

115dB

90°x60° HxV

2,5 kHz

-

Combo XLR-M/JACK

5,4 Kg

255x415x245mm

STUDIO.PRO 14 STUDIO.PRO 14BA

LOUDSPEAKER CABINETS

Loudspeaker cabinet

• Extremely light and sturdy enclosure made of gas injection moulded polypropylene, black colour, integral handle

• Stand adapter, 2 M6 anchoring points

• 2-way bass-refl ex system with

320mm woofer and 25mm high frequency tweeter

• Built-in class G amplifi ers 150W

RMS for the woofer and 50W

RMS for the high frequency unit;

ADAP (Advance Dynamic Active

Protection) designed to limit amplifi er saturation and ensure complete reliability of the system even in extreme conditions

(STUDIO.PRO 14BA)

• 24dB/oct active fi lters

(STUDIO.PRO 14BA)

• Power 250 Watt

• Impedance 8 Ohm

• Frequency response

60Hz-20 kHz

• Sensitivity 98dB 1W/1m

• Maximum SPL 122/125dB

(STUDIO.PRO 14B) 121dB

(STUDIO.PRO 14BA)

• Dispersion (HxV) 90°x60°

• 2 speakon input connectors

• Control panel with Ground Lift switch, Combo XLR/JACK inputs,

XLR male output, limiter, volume control (STUDIO.PRO 14BA)

SJ 14 UB

ST 30 B

ST 40 B

Wall mounting brackets

Model

SJ 14 UB 19709

Adjustable fl oor stand

Adjustable fl oor stand

Code 18240

Code

Adjustable, metal fl oor stand, with safety locking device

Colour black

Code 18239

Adjustable, aluminium fl oor stand, with safety locking device

Code

Confi guration

Recommended amplifi er

Internal amplifi er

STUDIO.PRO 14B

19682

2 way

250W rms

-

Long term power (AES) 125W

Short term power (IEC 268-5) 500W

Nominal impedance 8ohm

Frequency response (@-6dB) 60Hz - 20kHz

Low frequency woofer

High frequency woofer

1x320

ø 51 mm coil

1x25.4+horn

ø 25.4 mm coil

Sensitivity 1W/1m

Maximum SPL 1m

Dispersion

Crossover frequency

Recommended hp fi lter

Input connectors

Weight

Dimensions (WxHxD)

98dB

122/125dB

90°x60° HxV

2,5 kHz

40Hz 24dB oct

2xspeakon

13,5 kg

410x663x387mm

STUDIO.PRO 14BA

19683

2 way

-

150W+50W rms

-

-

-

60Hz - 20kHz

1x320

ø 51 mm coil

1x25.4+horn

ø 25.4 mm coil

98dB

121dB

90°x60° HxV

2 kHz

40Hz 24dB oct

Combo XLR/JACK

16 kg

410x663x387mm

77

ARCHON 108

PERMANENT INSTALLATION LOUDSPEAKER

ARCHON 106

• 2-way, passive sound reinforcement systems

• 12mm (0.47”) baltic birch plywood cabinets

• Custom designed LF woofers, made in Italy

• Custom designed HF dome tweeter, Made in Italy

• Crossover networks equipped with 4 x Euroblock speaker terminals; factory preset for optimal line transformer installation

• Multiple M5 threaded rigging points

• Acoustically transparent steel grille and antidust protection cloth

• New FBT rotatable logo badge following vertical or horizontal installation

• Optional mounting hardware

• Optional line transformer (100W for Archon 108 and 106, 50W for

Archon 105)

• Passive Sound Reinforcement

350W / 8 ohm - 121dB SPL

• 1 x 8” (1.5”) custom made LF woofer with rubber surround

• 1 x 1.5” HF high-end dome tweeter

• 8 x M5 threaded rigging points

• 2-way, passive sound reinforcement systems

• 12mm (0.47”) baltic birch plywood cabinets

• Custom designed LF woofers, made in Italy

• Custom designed HF dome tweeter, Made in Italy

• Crossover networks equipped with 4 x Euroblock speaker terminals; factory preset for optimal line transformer installation

• Multiple M5 threaded rigging points

• Acoustically transparent steel grille and antidust protection cloth

• New FBT rotatable logo badge following vertical or horizontal installation

• Optional mounting hardware

• Optional line transformer 100W

• Passive Sound Reinforcement

300W / 8 ohm - 119dB SPL

• 1 x 6.5” (1.5”) custom made LF woofer with rubber surround

• 1 x 1” HF dome tweeter

• 6 x M5 threaded rigging points

78

AC-W 568

Code 36987

Directional wall metal bracket black for

Archon 106

AC-W 568W

Code 37330

Directional wall metal bracket white for

Archon 106

Code

Confi guration

ARCHON 108

36252

2 way

Recommended amplifi er 350 W rms

System Long term power

175 W

System Short term power IEC 268-5 700 W

Transformer

Nominal impedance

Frequency response

Low frequency woofer

100 / 100 V/W optional

8 Ohm

55Hz - 22KHz @-6dB

8 - 1.5 coil

AES power

High frequency driver

AES power

Sensitivity (@1W/1m)

Maximum SPL cont/peak (Bi-Amp)

Dispersion HXV

Crossover frequency

Recommended HP fi lter

Input connectors

Net dimensions (WxHxD)

Net weight

Transport dimensions(WxHxD)

Transport weight

150 W

1.5 - 1.5 coil dome

35 W

92.5 dB

118 / 121 dB

90°

2 kHz

40hz - 24dboct

4 x Euroblock 0-8-100V (low-high)

248x411x248mm

6,5/14,3 kg/lb

330x491x330mm

8,5/18,7 kg/lb

ARCHON 106

36251

2 way

300 W rms

150 W

600 W

100 / 100 V/W optional

8 Ohm

60Hz - 22KHz @-6dB

6.5 - 1.5 coil

120 W

1 - 1 coil dome

20 W

91 dB

116 / 119 dB

100°

2.5 kHz

45hz - 24dboct

300x440x300 mm

7,5/16,5 kg/lb

18/39,6 kg/lb

690x370x625mm

20/44 kg/lb

ARCHON 105 ARCHON 208S

PERMANENT INSTALLATION LOUDSPEAKER

• Passive Sound Reinforcement

200W / 8 ohm - 115dB SPL

• 1 x 5” (1.25” VC) custom made

LF woofer with rubber surround

• 1 x 1” HF dome tweeter

• 4 x M5 threaded rigging points

• Passive Sound Reinforcement

Subwoofer

600W / 8ohm 132dB SPL

• 2 x 8” (2” VC) custom made high excursion woofer with bassrefl ex enclosure

• 15mm (5/8) birch plywood enclosure

• Two pocket handles

• 2 x Speakon NL-4 connectors

AC-W 568

Code 36987

Directional wall metal bracket black for

Archon 105

AC-W 568W

Code 37330

Directional wall metal bracket white for

Archon 105

Code

Confi guration

ARCHON 105

36250

2 way

Recommended amplifi er 200 W rms

System Long term power

100 W

System Short term power IEC 268-5 400 W

Transformer

Nominal impedance

Frequency response

Low frequency woofer

100 / 50 V/W optional

8 Ohm

70Hz - 22KHz @-6dB

5 - 1.25 coil

AES power

High frequency driver

AES power

Sensitivity (@1W/1m)

Maximum SPL cont/peak (Bi-Amp)

Dispersion HXV

Crossover frequency

Recommended HP fi lter

70 W

1 - 1 coil dome

20 W

89 dB

112 / 115 dB

110°

3 kHz

60hz - 24dboct

Recommended external fi lter

Input connectors

Net dimensions (WxHxD)

Net weight

Transport dimensions(WxHxD)

Transport weight

-

4 x Euroblock 0-8-100V (low-high)

180x300x180 mm

4/8,8 kg/lb

260x380x260 mm

6/13.2 kg/lb

ARCHON 208S

36256

1 way

600 W rms

300 W

-

1200 W

8 Ohm

50Hz - 500Hz @-6dB

2 x 8 - 2 coil

150 W

-

-

95 dB

129/132 dB half space omni external active

40hz - 24dboct

Digital management with presets

2 x Speakon NL4 in & thru

550x285x480mm

18/39,6 kg/lb

690x370x625mm

20/44 kg/lb

79

CS3130/TW

Column speaker with aluminium body

• Power 30 Watt RMS with

70-100V transformer and

7.5/15/30W power selection

• Frequency response

200Hz-16kHz

• Sensitivity 91dB

• Maximum SPL 106dB

• fi ve 2” loudspeakers

• Horizontal dispersion (-6dB)

1kHz/4kHz 180°/120°

CS3150/TW

COLUMN SPEAKERS

Column speaker with aluminium body

• Power 50 Watt RMS with

70-100V transformer and

10/20/40W power selection

• Frequency response

200Hz-16kHz

• Sensitivity 94dB

• Maximum SPL 110dB

• ten 2” loudspeakers

• Horizontal dispersion (-6dB)

1kHz/4kHz 180°/120°

CS3180/TW

Column speaker with aluminium body

• Power 80 Watt RMS with

70-100V transformer and

15/30/60W power selection

• Frequency response

200Hz-15kHz

• Sensitivity 96dB

• Maximum SPL 114dB

• fi fteen 2” loudspeakers

• Horizontal dispersion (-6dB)

1kHz/4kHz 180°/120°

80

75 75 75

SC A2

Wall fastening bracket

Code 20130

CS3130/TW CS3150/TW CS3180/TW

Code

CS3130/TW

37922

CS3150/TW

37923

CS3180/TW

37924

Power (R.M.S.) 7,5-15-30W - 100V 10-25-50W - 100V 20-40-80W - 100V

Sensitivity 1W/1m 91dB 94dB 96dB

Frequency response 200÷16.000Hz

(± 6dB)

200 ÷ 16.000Hz 200 ÷ 15.000Hz

Loudspeakers

Cabinet

N° 5 x 2”

Aluminium

N° 10 x 2”

Aluminium

N° 15 x 2”

Aluminium

Weight 1,94 Kg 3,4 Kg 4,63 Kg

Dimensions (WxHxD) 65x385x74,3mm 65x653x74,3mm 65x920x74,3mm

WEATHER PROOF

SPEAKERS

81

SHADOW 112CT SHADOW 108CT

ALL WEATHER LOUDSPEAKERS

SHADOW 105T

4 wires cable to select the desired power tapping

Water-stop grill with 3 layers of protection

IP55 weather resistant

Standard grey fi nish RAL 7011

• Multipurpose High

Performance 12” Coax

600W/8ohm - 128dB SPL

• 12” coaxial woofer with 2.5” coil and 1” HF driver with 1.7” coil on conical 90° horn

• 100V line transformer with selectable 200W/100W power tapping

• Sturdy molded polyethylene curved enclosure

• Multipurpose 8” Coax

450W/8ohm - 124dB SPL

• 8” coaxial woofer with 2” coil and 1” HF driver with 1.4” coil on conical 90° horn

• 100V line transformer with selectable100W/50W power tapping

• Sturdy molded polyethylene curved enclosure

• Steel U bracket and other included hardware accessories

• Multipurpose 5” Full Range

120W/8ohm - 112dB SPL

• 2 way confi guration with an high power 5” cone and 1” dome for high frequencies

• 100V line transformer with selectable 50W/25W power tapping

• Die-cast aluminum wall bracket with ball/socket for multi angle adjustment capability, with a security cable

82

Code

Confi guration

SHADOW 112CT

36194

2 way

Recommended amplifi er (Biamp LF/HF) 600 W rms

System Long term power (Biamp LF/HF) 300 W

System Short term power IEC 268-5

(Biamp LF/HF)

1200 W

Transformer 100 / 200 V/W

Nominal impedance (Biamp LF / HF) 8 Ohm

Frequency response

Low frequency woofer

AES power

70Hz - 20KHz @-6dB

12 - 2.5 coil

250 W

High frequency driver

AES power

1 - 1.7 coil

50 W

Sensitivity (@1W/1m) (Biamp LF/HF) 98 dB

Maximum SPL cont/peak 124 / 128 dB

Dispersion HxV

Crossover frequency

Recommended HP fi lter

90° conical

1.6 kHz

50hz - 24dboct

Input connectors

Net dimensions (WxHxD)

Net weight

Transport dimensions(WxHxD)

Transport weight

4 wire cable

430x430x400mm

15 / 33 kg/lb

530x530x500mm

17/37 kg/lb

SHADOW 108CT

36193

2 way

450 W rms

225 W

900 W

100 / 100 V/W

8 Ohm

80Hz - 20KHz @-6dB

8 - 2 coil

200 W

1 - 1.4 coil

25 W

95 dB

120 / 124 dB

90° conical

1.8 kHz

60hz - 24dboct

4 wire cable

285x285x250mm

7 / 15,4 kg/lb

365x365x330mm

9/19,8 kg/lb

SHADOW 105T

36192

2 way

120 W rms

60 W

240 W

100 / 50 V/W

8 Ohm

90Hz - 20KHz @-6dB

5 - 1 coil

50 W

1 - dome

10 W

89 dB

109 / 112 dB

100°

3 kHz

70hz - 24dboct

7 wire cable

168x222x200mm

3,5 / 7,7 kg/lb

250x300x280mm

4,5/9,9 kg/lb

430

GDS 200T/DT

EXTERNAL SOUND SPEAKERS

IP55 external sound speaker

• Dual cone two way loudspeaker

• Polyurethane framework

• 8” diameter

• Stainless steel basket

• Polypropylene diaphragm

• Rubber suspension

• ø 25,5mm coil

• ø 100mm coil ferrite magnet

• 8 ohm impedance

• 150W maximum peak power

• 75W Rms active power

• 40 Hz - 18.000 Hz passband

• 90dB +/- 2dB sensitivity (1W/1m)

• Size 430x295x300mm

• Weight 3.6 kg

GS 20/T

EXTERNAL SOUND SPEAKERS

IP66 external sound speaker

• Guaranteed to resist to diffi cult weather conditions

• It can be placed near pools, on terraces or in gardens

• This versatile speaker can be mounted on the surface or underground

• Speaker’s base has been designed to guarantee a fi rm and safe positioning

• Offers extraordinary coverage thanks to its design, enabling a

360° sound dispersion

• 80Hz-15,000Hz frequency response

• 95dB+/-3dB sensitivity

• 100V Transformer

• 4” Woofer

• ABS, green coloured

• Diameter 215x245mm

• Net weight 2.04Kg

Code

System

IP-rating

Maximum power

Active power

Constant voltage

Banda passante

SPL Sensitivity

Dimensions (WxHxD)

Weight

GDS 200T/DT

20010

2 way dual cone

55

150W

75W rms

100 V

40-18.000Hz

90 +/- 2dB (1W/1m)

430x295x300mm

3,6 kg

Code

System

IP-rating

Maximum power

Active power

Sensitivity

Transformer

Woofer

Colour

Dimensions

Weight

GS 20/T

29432

2 way dual cone

66

150W

20W

95dB+/-3dB

100V

4”

Green in ABS

ø 215x245mm

2,04 kg

83

84

FBT: EXCELLENCE WITH A

VAST SELECTION

FBT offers a vast and comprehensive range of speakers to meet all sound requirements and applications. Specifi cally designed to enable simple and safe installation, with a modern and eye-catching design, these products are the ideal choice to solve all ambient sound distribution requirements.

All product lines, from recessed ceiling loudspeakers in paintfi nished metal or in plastic with dual cone or coaxial loudspeakers, speakers constructed using fi reresistant materials, IP

55-56-68 weatherproof elements, speakers designed for clean rooms or special production departments, to the industrial or entertainment sound models, have been designed according to the latest electro-acoustical parameters.

The result is absolute excellence; perfect music reproduction and optimal voice clarity and speech fi delity. Special attention has been paid to the simplifi cation and reduction in time required for installation and network connections of the power cables, thanks to a special accessory kit supplied as standard. guarantee a fl at frequency response and uniform sound pressure to give optimum listening pleasure and clarity. To meet these requirements, the hypothetical ideal solution would be to place each sound source at an equal distance from all possible listening points.

The basic principles of effective surface mount ceiling loudspeaker installation

The fi rst priority of a high quality sound reproduction system is that of providing listeners with sound information at an acoustic level that is higher than any possible background noise. The system must simultaneously assure a very wide frequency band and the maximum intelligibility. It should also

CEILING APPLICATION

In environments offering suitable height, this ideal reference standard can be approximated by using loudspeakers with very wide response and dispersion angles that remain unchanged at different frequencies, arranged in a ceiling or shower type confi guration.

This gives the following benefi ts:

1- Maximum sound distribution uniformity

2- Maximum speech intelligibility

3- Constant quality of music reproduction

4- Reduced presence of reverberation and stationary waves in the environment

5- Sound source remains at a constant distance from the listening position

6- Ample sound energy also at the lowest level

Once the required type of loudspeaker has been chosen, and the characteristic parameters considered (particularly the relationship between the dispersion angle and the room surface area), the number of units needed to obtain constant and uniform sound diffusion can be easily calculated. The number of loudspeakers is calculated by dividing the fl oor area in square metres by the area of coverage of each loudspeaker on the listening plane. Figure

1 clearly illustrates the above concept.

5÷6 mt

12 mt

5÷6 mt

24 mt

Z O N A

D'O M BRA

8÷10 mt

WALL APPLICATIONS

If the architectural features of the room are not compatible with a ceiling confi guration or if a “wall” application is preferred, it is essential to observe a few basic rules to obtain the best possible sound distribution. In order to maintain the listening point inside the direct signal area, both surface mounted and external loudspeakers, with power from 6 to 20

Watt, should be installed at a height of between 2 and 2.5 m. The maximum

2 x 2

4÷5 mt

5÷6 mt fi gure 1 fi gure 2 fi gure 3

A quick and approximate calculation can be made of distance d, which separates the centres of two loudspeakers, when the angle of emission A and height of the ceiling H is known: d=2*(H-1)*B where H is the height of the ceiling expressed in metres, constant 1 is the height of the listening surface of a seated person and B is the tangent of

A/2. From the above data, it is evident that for the same ceiling height H, loudspeakers with wider dispersion angles offer a larger sound diffusion area and therefore a smaller number of speakers are effectively needed. fi gure 4

Layout of loudspeakers for 80% coverage distance between adjacent loudspeakers must be no more than 5/6 metres along the length of the room, which should be no wider than 4/5 metres. For wider rooms, e.g. about 8-10 metres, it is recommended to install loudspeakers in an alternated pattern along both the opposing walls in such a way as to provide adequate coverage and maintain sound pressure at the most constant possible level in the area in question (see fi gures 2 and 3).

fi gure 5

Layout of loudspeakers for 100% coverage

Figure 4 shows the surface area covered by the sound signal with relative dark zones, and fi gure 5 with a different grid and greater number of loudspeakers

(50%) guarantees maximum uniformity.

Angle of

loudspeaker emission

80

90

100

110

120

130

Coeffi cient

B

0,84

1,00

1,19

1,43

1,73

2,14 d with

H=3m

3,36

4

4,76

5,72

6,92

8,56 d with

H=3.5m

4,2

5

5,95

7,15

8,65

10,7 d with

H=4m

5,04

6

7,14

8,58

10,38

12,84 d with

H=4.5m

5,88

7

8,33

10,01

12,11

14,98

m ax 15 mt

15 mt m ax 30 mt

15 mt

For sound distribution in corridors, tunnels, passenger platforms in railway or underground railway stations, horn loudspeakers are used, suited for vocal reproduction, and higher quality loudspeakers called “sound projectors”.

In all cases these loudspeakers must be installed at a maximum distance of 15 metres from one another, mounted all in the same direction and in observance of the phase of each loudspeaker. Alternatively bi-directional versions of these loudspeakers can be considered, positioned at max. 30 metres from one another and again in observance of the connection phase. (see fi gure 6)

DEGREES OF PROTECTION

The characteristics of a product in terms of its resistance to the penetration of solid objects and liquids is indicated by the letters IP

(International Protection) followed by two numbers.

The fi rst number identifi es the protection against the ingress of solid objects, while the second indicates liquid penetration resistance, in accordance with EN standards 60529-

CEI 70-1.

IP degree of protection

• The fi rst number identifi es the level of protection against the ingress of solid objects.

Number from 0 to 6.

• The second number identifi es the level of protection against penetration of liquids.

Number from 0 to 8.

First IP number:

0 Not protected

1 Protected against the ingress of solid objects larger than 50 mm

2 Protected against the ingress of solid objects larger than 12 mm

3 Protected against the ingress of solid objects larger than 2.5 mm

4 Protected against the ingress of solid objects larger than 1 mm

5 Protected against dust penetration

6 Totally dust-proof

Second IP number:

0 Not protected

1 Protected against vertically dripping water

2 Protected against water dripping at an angle (up to 15° from the vertical)

3 Protected against rain

4 Protected against water spray

5 Protected against water jets

6 Protected against waves

7 Protected against the effects of temporary immersion

8 Protected against the effects of permanent immersion

Constant impedance lines are used above all in the case of a low number of loudspeakers, placed at a minimum distance from the amplifi er (<20m).

The constant voltage connection system offers a host of advantages making it ideal for sound systems of all sizes, above all in the fi gure 6 case of long distances.

This connection system requires each loudspeaker to be equipped with its own line transformer, which adapts the impedance of the loudspeaker (usually very low) to the much higher level of the line itself.

In proportion to power transmitted, the current circulating on a line at 100V is considerably lower than that circulating on wires of a constant impedance system, and consequently drops along the line are less frequent; therefore the cable section can be smaller.

The function of the device named “AMPLIFIER” is to raise the signal of a sound source, such as a microphone, CD player, cassette recorder or an

AM/FM tuner to a suffi cient level to pilot the transducer

“LOUDSPEAKER”.

The amplifi er has several inputs, to which the various sound sources are connected.

The sound sources have to be mixed (mixer) and acoustically modifi ed with tone control and equalisers to optimise listening in relation to the environment’s characteristics. A terminal board is also fi tted on output indicating impedance and voltage to which the loudspeaker line is connected.

A few basic rules must always be observed:

1. When the load is on

“constant impedance”, this must be connected to the relative socket.

For example a load of 4 ohm must be connected to socket marked 4 ohm, and so on. The power that the load can withstand must always be greater than the amplifi er’s rated power.

For example in the case of a load of 100 Watt, the amplifi er must have a power equal to or less than 100 Watt.

2. When the load is at

“constant voltage”, this must be connected to the sockets indicating output at constant voltage -50-70 or 100

Volt; the power that the load can withstand must always be less than or equal to the amplifi er rated power. For example a load of 100

Watt, the amplifi er must have a power equal to or greater than 100 Watt.

To calculate the value of the amplifi er power, simply add together the power of each loudspeaker, in the case of a “constant voltage” system.

However, on a constant impedance system, the load must have an equivalent impedance

(series/parallel) equal to or greater than the minimum value indicated on the amplifi er output.

The loudspeaker power supply lines, with no connected attenuator, must be with 2 sheathed wires; cables with 3 sheathed wires are required in the case of lines using attenuators which can be disabled if an emergency is activated. Adequate wire sections are required: 1.5 mm2 for lines up to 500

Watt power

2.5 mm2 for lines with power over 500Watt. The following general standards must also be observed:

• Never use a single cable

(lead) for loudspeaker connections: this would cause disturbance producing a loud “HUM”

• Never use shielded cables for the loudspeaker connections: this would cause serious damage to the power units.

85

86

Model

CESL 10T BIDI

CESL 20T

CHA 1004

CM 08

CM 12

CM 18

CM 22

CM 26

CM 601

CS 3030/T

CS 3040/T

CS 3060/T

CSL 106/T

CSL 520 TIC

CSL 606 TWP

CSL 630 TIC

CSL 840 TIC

CSP 406 T/EN

CSP 412 T/EN

CUD4000

CUW4000

CV 2010

D8P-1

DG 01

DP 10 T

AC-W568

AC-W568W

AL 8000

AM 5030

AP 08

AP 12

AP 18

AP 22

AP 26

AQUA 30

ARCHON 105

ARCHON 106

ARCHON 108

ARCHON 208S

ASG 230

AVL 606

BF-T 5043 L

BK 560 CRT

CAD 20 T

CAR 6 FT

CESL 10T

DPD 10 T

DPU 1125 C

DPU 1250 C

DPU 1500 C

EAC4000

FBT AC CS 1CH

FBT AC CS 1CU

FBT AC CS 1DU

FBT AC D7P-10

FBT AC D7P-20

FBT AC D7PDH-1

FBT AC EXM-1

FBT AC EXS-1

FBT AC MX-8

FBTAC CM 501

FBTAC CX 504

FBTAC GM 5206L

FBTAC GM 5212L

FBTAC GM 5218L

FBTAC Mh 750

FBTAC Mh 920

FBTAC PT 850B

FBTAC ST 5050

FBTAC ST 850

FBTAC US 8001 D

Code

27516

20128

20131

20129

29427

29416

29429

29417

29418

29429

29421

37711

12682

12681

12385

11827

12669

37727

37728

34554

34555

35541

37936

12114

09352

12668

10436

36250

36251

36252

36256

11864

14142

37987

37330

17074

11583

12897

12898

12667

12178

18322

09309

11469

11956

29420

27514

27513

27494

27496

27495

27499

27500

27493

37649

37650

37646

37647

37645

27497

27498

27515

11818

37724

37725

37726

34556

27511

27510

27512

37648

Model

MB-T 8001

MB-T 8004

MB-T 8008

MCA 4030

MC-F 5042

MCSL 006 TW

MCSL 006 TWP

MD-F 5044

MD-F 5045 S

MD-F 5045 SI

MDS 1060

MD-S 1100

MDS 1120

MDS 1240

MD-S 1300

MDS 6120

MDS 6240

MHO 420 TW/EN

MHS 50T

MMU4000

MMZ 8004 S

MPA 5120

MPA 5240

MPA 5480

MPS1016

FBTAC US 902 D

FMD 2001

FMD 2012

FMG 2000

FMH 2000

FPS/505T

GB 820/T

GDS 200T/DT

GS 20/T

HM-26

HS 50T

INTERCOM 1300

IW-100 T

IW-200 TCP

LM-10

M 12X4

MBT 1101

MBT 1106

MBT 1112

MBT 1112E

MB-T 6400 S

MPU 2120

MPU 4060

MPU 4120

MPU 4240

MRK 12

MRK 20

MRK 24

MRK 30

MRK 36

MS 30 BK

MS02 CD3/DG

MS02 CD3/T

MSP 420 TW/EN

MXA 1060

MXA 1120

MXA 3120

MXA 3240

MZU 2008

PA-A 01

PC 01

PC 02

PC 03

PH 10 T

PH 20 T

PH 30 T page

58

58

59

59

59

28

80

80

80

43

43

43

43

62

62

11

43

32

36

44

60

69

69

19

19

78

79

27

33

43

56

79

78

78-79

78-79

31

47

43

43

43

43

30

56

61

60

62

34

29

29

34

28

28

34

34

36

34

34

28

22

22

23

23

19

22

22

22

22

60

11

11

11

Code

10046

15294

37495

10040

37496

37497

10042

37643

37644

19543

11828

12122

20236

10044

29425

29426

10045

37735

29431

34553

19812

37490

37489

37491

04693

29432

13543

29422

18083

17859

17862

13544

18147

27492

37485

37486

37488

37487

35302

29430

20010

37739

37492

37493

37494

28840

12944

12905

12117

12116

12912

11474

11475

10446

18245

27868

27867

37734

37638

37639

37640

37641

31080

31079

31059

31078

36546

35673

35839 page

50

50

26

51

51

27

27

50

26

26

58

58

26

31

31

31

42

46

11-46

11-46

44

70

63

18

38

57

57

33

37

83

33

63

24

32

32

32

32

30

14

55

62

83

34

14

14

14

44

64

64

64

39

44

44

44

48

48

49

49

27

45

45

67

43

43

43

43

43

40

40

41

41

Code

19707

19705

12907

12908

12909

37751

37733

37732

37637

09356

20130

36192

36193

36194

19709

19706

19708

37636

19710

18239

18240

13360

13103

13104

19682

32368

29225

32369

29227

32370

29229

32371

29351

12899

12900

12901

29350

32372

29221

32367

29223

18159

18160

12913

37731

12906

36187

36186

29470

11573 (175 Mhz)

11574 (214 Mhz)

14922 (204 Mhz)

14923 (212 Mhz)

14924 (203 Mhz)

11586

18248

31011

37642

37713

37484

37712

36145

19683

19678

19681

19680

19677

19679

31150

31151

31152

Model

SAFE 10 PT

SC A2

SHADOW 105T

SHADOW 108CT

SHADOW 112CT

SJ 14 UB

SJ 9 B

SJ 9 UB

SJ 9 UW

SJ 9 W

SO-12

SO-18

SO-22

SON24V 6A MS40

SOP 412 T/EN

SOP 426 TB/EN

SP 115 B/WP

SP 115 WP

ST 20 B

ST 30 B

ST 40 B

STH 02-022

STH 05-022

STH 09-022

STUDIO.PRO 14 B

PP-A 02

PP-A 08

PP-A 12

PROJECT 315 BT

PROJECT 315 WHT

PROJECT 320 BT

PROJECT 320 WHT

PROJECT 530 BT

PROJECT 530 WHT

PROJECT 550 BT

PROJECT 550 WHT

PROJECT 640 BT

PROJECT 640 WHT

PROJECT 660 BT

PROJECT 660 WHT

PROJECT Sub 1180A

RB-100

RB-200

RP 02

RWS 412 T/EN

SA 02

STUDIO.PRO 14 BA

STUDIO.PRO 9 B

STUDIO.PRO 9 BA

STUDIO.PRO 9 BT

STUDIO.PRO 9 W

STUDIO.PRO 9 WT

STYLE A40

STYLE P80

STYLE S80

SU 30

TB 30 BK

TR-20

USB 3000

VAC 2006

VAIE 2250

VAR 2006

VERTUS CLA 604

VERTUS DLA 1244A

VERTUS DLA 804A

WCS 650

WM 505/…

WM 505/…

WM 505/…

WM 505/…

WM 505/… page

44

13

67

67

61

76

76

44

44

82

77

76

76

54

80

82

82

31

31

31

77

61

76

77

77

74

74

74

75

73

73

73

74

57

57

44

69

44

72

72

72

73

43

43

43

72

33

33

33

33

66

66

54

33

9

12

10

66

27

27

71

49

76

76

71

71

71

77

76

76

76

Model

WM 705 A/L

WM 705 A/L

WMS 406 T/EN

WSH 1006

WSP 406 T/EN

Code

14827 (181 Mhz)

14828 (203 Mhz)

37730

29419

37729 page

33

33

68

55

68

87

Artwork Studio Conti

Photos F:16 studio

Printers Tecnostampa

FBT Elettronica S.p.a. has the right to amend products and specifi cations without notice.

FBT Elettronica SpA

62019 Recanati (M C) - Italy

Tel: +39 071 750591

Fax: +39 071 7505920 [email protected] - www.fbt.it

(International Headquarter - Factory)

FBT Audio (UK) Ltd

South Croydon, Surrey, U K

Tel: 0844 310 4592

Fax: 0844 310 4594 [email protected]

www.fbtaudio.co.uk

FBT USA, Inc.

Palm Coast, Florida, U S

Tel: 800 333 9383 [email protected]

Distributed by

AUDIO CONTRACTOR general catalogue 2013•2014

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement