QuickSpecs
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Overview
1. Access Panel
2. Processor 2 Memory Banks C and D
3. Up to two AMD Opteron™ 2000 Series processors (shown
here with 1 processor installed)
4. Up to 2 small form factor (SFF) SAS or SATA hot plug hard
disk drives (optional)
5. Power On/Standby Button
7. Redundant Fan Module
8. Processor 1 Memory Banks A and B
9. Smart Array E200i Controller cache module
10. Optional Dual Port Fibre Channel Adapter (QLogic-based or
Emulex-based)
11. Optional NIC Adapter (single function or multifunction
Gigabit)
6. Front panel LEDs
What's New
Support for 36 GB and 72 GB 15K DP Serial Attached SCSI (SAS) SFF Hot Plug Hard Drives
Support for 72 GB and 146 GB10K DP Serial Attached SCSI (SAS) SFF Hot Plug Hard Drives
At A Glance
This QuickSpecs provides information for the HP ProLiant BL25p G2 server blade only. For more information on HP BladeSystems pClass Infrastructure and HP BladeSystem p-Class Interconnect Components, please see the following QuickSpecs:
HP BladeSystem p-Class Infrastructure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12330_na/12330_na.HTML and HP BladeSystem p-Class Interconnect
Components QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12331_na/12331_na.HTML
The HP ProLiant BL25p Generation 2 server blade delivers maximum dual-processor performance, enterprise manageability and
availability, and superior server design to the datacenter.
Processor:
Up to two AMD Opteron 2000 Series processors
Supports up to two AMD Opteron processor Model 2220 (2.8 GHz) featuring 1MB Level 2 cache memory per core
Supports both standard (95W) and low power (68W) versions of AMD Opteron 2000 series processors
Processors are connected through 1 GHz HyperTransport™ links
DA - 12569
North America — Version 10 — December 14, 2007
Page 1
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Overview
ServerWorks HT-1000 and HT-2100 chipsets
Memory:
Up to 32 GB of PC2-5300 Registered DDR2 (667 MHz) memory, 8 DIMM slots
Advanced ECC memory support
Supports 2:1 memory interleaving
Storage Controller:
Integrated Smart Array E200i Controller with 64 MB cache
Supports RAID 0 and 1
Optional 128MB battery-backed write cache (BBWC) module for internal storage data protection
Internal Drive Support:
Up to 2 small form factor (SFF) SAS or SATA hot plug hard disk drives (support for SATA hard drives via Factory
Integration only)
Network Controller:
Two (2) embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP Offload Engine for Microsoft Windows
One (1) additional 10/100 NIC dedicated to iLO 2 management
Optional Mezzanine Card support:
Supports (1) Fibre Channel card:
Dual Port Fibre Channel Mezzanine (2-Gb) options for SAN connectivity (Choice of Emulex or QLogic)
Supports (1) networking card for two (2) additional Ethernet network ports, choose from the following:
HP NC374m PCI Express Dual Port Multifunction Gigabit Server Adapter for HP BladeSystem with TCP/IP
Offload Engine for Microsoft Windows
HP NC320m PCI Express Dual Port Gigabit Server Adapter for HP BladeSystem
USB Ports:
One (1) internal USB 2.0 connector for security key devices and USB drive keys
I/O cable with two (2) USB 2.0 ports, one (1) video port, one (1) iLO 2 port and one (1) kernel debug port. The cable
was specifically designed to aid in initial server image deployment and ships with every HP BladeSystem p-Class server
blade enclosure
Redundancy:
The HP BL25p G2 server features five (5) integrated fans for sufficient cooling. The redundant fan design allows for
uninterrupted server operations
Operating Systems:
Supports Windows, Linux, Solaris, and VMware ESX Server
Form Factor:
The HP ProLiant BL25p G2 server blade plugs vertically into an HP BladeSystem p-Class server blade enclosure.
HP BladeSystem p-Class server blade enclosures with enhanced backplane components might be required depending
on which HP ProLiant server blade model is selected. Please visit the enclosure compatibility matrix at
http://www.hp.com/go/bladesystem/enclosure/compatibility
Management:
Integrated Lights-Out 2 (iLO 2) Standard Blade Edition (includes virtual KVM and graphical remote console at no
additional cost)
Enclosures:
The HP BladeSystem p-Class server blade enclosure is 6U (10.5-inches) in height, 19-inches wide and holds up to 8 HP
ProLiant BL25p G2 server blades plugged vertically.
Warranty:
Protected by HP Services and a worldwide network of HP Authorized Channel Partners. Three-year parts, 3 Year Labor
and 3 Year on-site limited global warranty. Certain restrictions and exclusions apply. SATA hard drives have a one year
warranty.
DA - 12569
North America — Version 10 — December 14, 2007
Page 2
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Standard Features
NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and
specifications, please visit: http://h71028.www7.hp.com/ERC/downloads/4AA0-7325ENW.pdf
AMD Opteron™ processor Model 2220 (2.8 GHz, 95W)
Processors
AMD Opteron processor Model 2218 (2.6 GHz, 95W)
AMD Opteron processor Model 2216 (2.4 GHz, 95W)*
AMD Opteron processor Model 2210 (1.8 GHz, 95W)*
Low Power AMD Opteron processor Model 2216 HE (2.4 GHz, 68W)
Low Power AMD Opteron processor Model 2214 HE (2.2 GHz, 68W)
Low Power AMD Opteron processor Model 2212 HE (2.0 GHz, 68W)*
Low Power AMD Opteron processor Model 2210 HE (1.8 GHz, 68W)
NOTE: AMD Opteron 2000 Series processors are 64-bit, dual-core, and support AMD Virtualization™
and DDR2 memory technology. AMD Opteron 2000 Series processors are connected through 1 GHz
HyperTransport™ links.
NOTE: *Offered via Factory Integration only.
Upgradeability
Upgradeable to dual processing (2 processors)
Cache Memory
1MB Level 2 cache memory per core (2MB total)
Chipset
ServerWorks HT-1000 and HT-2100
Memory
Type
PC2-5300 Registered DDR2 DIMMs (667 MHz)
Standard
1 GB (2 x 512 MB)
(Depending on
2 GB (2 x 1 GB)
model)
Maximum
32 GB (8 x 4 GB)
NOTE: Memory must be installed in pairs. For additional memory configuration guidelines, see
"Memory" section of this HP BL25p G2 QuickSpecs.
Network Adapter
Two (2) embedded NC373i Multifunction Gigabit Network Adapters
One (1) additional 10/100 NIC dedicated to iLO 2 Management
NOTE: Must use a HP BladeSystem p-Class server blade enclosure with enhanced backplane
components to utilize all four possible NIC's (HP P/N's 281404-B22, 243564-B22 or 380625-B22).
Expansion Slots
No PCI slots; all features are integrated
NOTE: Additional network and fibre channel connectivity is available via optional mezzanine cards.
I/O cable connectors:
(2) USB 2.0 ports, (1) video port, (1) iLO 2 port and (1) kernel debug port
(2) I/O cables ship with every HP BladeSystem p-Class server blade enclosure
Tested USB devices (keyboard, mouse, floppy) are listed in the "Options" section of this QuickSpecs.
DA - 12569
North America — Version 10 — December 14, 2007
Page 3
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Standard Features
Integrated Manageability Integrated Lights-Out 2 (iLO 2) Standard Blade Edition (integrated on motherboard)
Virtual KVM based remote console
Virtual media (single server, browser based access only)
Remote Serial Console
Virtual Power Button Control
Virtual Unit ID control
Integrated Remote Console
Dedicated network connectivity
Embedded system health
Browser, command line (SM-CLP) and scripted access
Automatic IP Configuration via DHCP/DNS/WINS
Industry Standard 128-bit Secure Sockets Layer (SSL) and Secure Shell security (SSH)
OS independent hardware health status
IML and iLO Event Logging
Support for 12 user accounts with customizable access privilege
Single sign-on from HP BladeSystem Onboard Administrator
Storage Controller
Smart Array E200i
Controller
Maximum Internal
Storage (internal drive
cage)
Hot Plug Serial Attach
292GB SAS
SCSI (SAS)
Hot Plug Serial ATA (SATA) 240GB SATA
Graphics
Integrated ATI RN-50 1280 x 1024 x 16M color (32 MB DDR1 memory)
Graphics Resolution
Supported
Resolution Color Depths
DA - 12569
64MB memory module supports RAID 0 and 1
Supports SAS and SATA disk drives
Available upgrades: 128MB battery-backed write cache (BBWC)
module
2 x 146GB Serial SCSI
2 x 120GB Serial ATA
Depths 1280 x 1024, 64k, 256,16
1024 x 768, 16.7M, 64k, 256, 16
800 x 600, 16.7M, 64k, 256, 16
640 x 480, 16.7M, 64k, 256, 16
North America — Version 10 — December 14, 2007
Page 4
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Standard Features
Fiber Channel on the
HP ProLiant BL25p G2
server blade
Compatible SAN
The HP ProLiant BL25p G2 supports one (1) optional fiber channel adapter for SAN connectivity.
Customers are offered a choice of either a QLogic-based or Emulex-based fiber channel adapter. Both
adapters are mezzanine circuit boards which connect directly to the server blade system board. These
optional fiber channel adapters are available via option kits and must be ordered separately.
QLogic-based
Utilizes a QLogic ISP2312 chipset
The HP QLogic-based dual port Fibre Channel Adapter (P/N 361426-B21) is compatible
with the HP ProLiant BL20p G3, BL20p G4, BL25p G2, and BL45p G2 server blades. It
cannot be used with HP ProLiant BL25p G1, BL35p, or BL45p G1 server blades
Includes two small form factor pluggable transceivers with LC connectors for installation
into the Patch Panel 2, CGESM or GbE2 Interconnect Switch (with the Storage Connectivity
Kit)
Emulex-based
Utilizes an Emulex "Thor" chipset
The HP Emulex-based dual port fibre channel HBA (P/N 394757-B21) is compatible with
the HP ProLiant BL20p G3, BL20p G4, BL25p G2, and BL45p G2 server blades. It cannot
be used with HP ProLiant BL25p G1, BL35p, or BL45p G1 server blades
There are no SFP's included in the Emulex mezzanine kit for use with ProLiant BL p-Class
Fibre Channel pass-through interconnects. If you require SFPs for use with an Emulex
mezzanine and a FC pass through interconnect please order an SFP option kit (P/N
397577-B21) which will provide 2 FC SFPs per option kit
Two ports on each Dual-port Fibre Channel Mezzanine Card provide a redundant Fibre Channel
connection to each server blade
Supports up to 2 Gb/s Fibre Channel equipment
HP ProLiant BL25p G2 server blades are optimized for StorageWorks MSA, EVA, and XP arrays.
HP ProLiant BL25p G2 server blades are compatible with select 3rd party SANs (please see server
blade storage page for more details):
http://h18000.www1.hp.com/products/servers/proliant-bl/p-class/storage.html
ProLiant Essentials
HP Systems Insight
Foundation Pack Software Manager
for the ProLiant BL Server
HP Systems Insight Manager (HP SIM) provides a unified, secure and
extensible environment to centrally manage servers, storage and other
infrastructure devices across multiple operating system platforms.
Through a single management view, HP SIM provides core management
services that include device discovery and identification, event views, health
monitoring, inventory data collection, software version control and reporting.
HP SIM is built on industry standards and is extensible with value-added
ProLiant Essentials, Integrity Essentials and Storage Essentials software to
meet individual management needs. For more details on HP SIM visit
http://www.hp.com/go/hpsim.
HP SIM provides organizations with the following benefits:
Simplifies and consolidates infrastructure lifecycle management using
task and query based functionality
Provides the foundation for infrastructure automation and
virtualization
Enables IT management based on business processes not hardware
platforms
Lowers infrastructure maintenance cost and frees resources for
innovation
DA - 12569
North America — Version 10 — December 14, 2007
Page 5
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Standard Features
ProLiant Essentials Rapid
Deployment Pack
Insight Management
Agents
Subscriber's Choice
ROMPaq, support
software, and
configuration utilities
Insight Diagnostics
DA - 12569
Maximizes resource utilization with virtualization technologies
Provides a central point of integration between infrastructure and
Enterprise management tools such as HP OpenView
Rapid Deployment Pack (RDP) is an automated deployment and provisioning
solution for all ProLiant servers. RDP includes the Altiris Deployment Solution
and ProLiant Integration Module featuring ProLiant server pre-configured
events for OS installation, and optimized software drivers, firmware and
management agents. Every RDP CD includes 10-node trial licenses for
evaluation purposes. RDP requires a license for each server deployed and is
available for purchase with blade servers. For more information, visit
http://www.hp.com/servers/rdp.
Insight Management Agents should be installed on all HP servers to present
system instrumentation, health and configuration information into HP
Systems Insight Manager and the HP System Management Homepage. The
HP System Management Homepage aggregates systems data from Insight
Management Agents and other HP management tools, providing a
consolidated browser-based interface for managing individual servers,
Insight Management Agents and The HP System Management Homepage
are included on ProLiant Support Packs, and can also be installed using the
server profiles provided with the ProLiant Essentials Rapid Deployment Pack.
For additional information about the Management Agents and the HP
System Management Homepage please visit the management Web site at
http://www.hp.com/servers/manage
Subscriber's Choice Driver and Support Alerts/Notifications is a web-based
email subscription service that provides software and driver change
notifications for ProLiant products. Sign up at
http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become
available, on a weekly or monthly basis.
The latest drivers and firmware fully optimized and tested for your ProLiant
server and options, available on the RDP Media kit, SmartStart or
downloadable from Software and Drivers download pages, linked from the
SmartStart website at http://www.hp.com/go/support.
The most advanced configuration analysis, reporting and troubleshooting
utilities used by HP and at your fingertips, available in SmartStart.
NOTE: For more information regarding ProLiant Essentials Software, please
see the following URL: http://www.hp.com/servers/proliantessentials
North America — Version 10 — December 14, 2007
Page 6
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Standard Features
Optional ProLiant
Essentials Value Packs
HP Insight Control management suites and most HP ProLiant Essentials will
include one year of 24 x 7 HP Software Technical Support and Update
Service ensuring rapid access to HP support staff and proactive delivery of
software updates. For more information about this service, please visit:
http://www.hp.com/services/insight.
Optional software offerings that selectively extend the functionality of an
Adaptive Infrastructure to address specific business problems and needs:
Insight Control Environment for BladeSystem - is based on HP
Systems Insight Manager and ProLiant Essentials software, and brings
the value of Insight Control to ProLiant customers by delivering
comprehensive health and performance monitoring, remote control,
vulnerability scanning and patch management as well as flexible
deployment and power management through an integrated
installation package and streamlined licensing. For more information,
visit: http://www.hp.com/go/ice
Rapid Deployment Pack (RDP) is an automated deployment and
provisioning solution for all ProLiant servers. RDP includes the ProLiant
Integration Module featuring ProLiant server pre-configured events for
OS installation, and optimized software drivers, firmware and
management agents. Every RDP disc includes 10-node trial licenses
for evaluation purposes. RDP requires a license for each server
deployed and is available for purchase with HP servers. For more
information, visit: http://www.hp.com/servers/rdp.
Server Migration Pack - Universal Edition - Upgrading, replacing, or
virtualizing your existing server? Effortlessly transition to new virtual or
physical HP ProLiant servers or BladeSystem with automated, accurate
and affordable migration of OS, application and data. SMP Universal
automates the manual processes required for migrating servers
between physical or virtual platforms, whether migrating to VMware or
Microsoft virtual machines. SMP Universal allows all of the following:
Physical to ProLiant
Physical to virtual
Virtual to virtual
Virtual to ProLiant
Virtual Machine Management Pack - Get the most out of server
virtualization by unifying the management of physical and virtual
servers in HP Systems Insight Manager. The Virtual Machine
Management Pack plug-in provides central management and control
of VMware and Microsoft virtual machines and provides physical host
to virtual machine association.
Optional Remote
Management
DA - 12569
NOTE: Flexible and volume quantity license kits are available for ProLiant
Essentials Value Packs. Refer to
http://www.hp.com/servers/proliantessentials or the various ProLiant
Essentials Value Pack product QuickSpecs for more information.
Integrated Lights-Out Select Pack - upgrades the Integrated Lights-Out
processor with scripted and command line virtual media (floppy,
CD/DVD, USB key), historical power reporting and enterprise security
(directory services and two-factor authentication).
North America — Version 10 — December 14, 2007
Page 7
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Standard Features
SmartStart
SmartStart is a tool that simplifies single server setup, providing a rapid way to deploy reliable and
consistent server configurations. SmartStart 7.60 and later can now deploy all HP ProLiant BL25p G2
server blades, using the I/O port with an attached USB CD-ROM device. To obtain a copy of SmartStart
for your blade server, redeem the coupon that is included with your Blade server or order your copy from
the SmartStart web site. For more information, please visit the SmartStart Web site at
http://www.hp.com/servers/smartstart.
SmartStart version supported (minimum): SmartStart 7.60
OS Support
Windows Server 2003, Web edition
Windows Server 2003, Server/Standard edition (32 & 64 bit editions)
Windows Server 2003, Enterprise edition (32 & 64 bit editions)
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
Solaris 10 (32 & 64 bit editions)
VMware ESX Server 3
NOTE: For a complete and up-to-date listing of supported OSs and versions, please visit our OS
Support Matrix at: http://www.hp.com/go/supportos.
NOTE: For an up-to-date listing of the latest drivers available for the HP ProLiant BL p-Class, please see:
http://h18004.www1.hp.com/support/files/server/us/family/model/5342.html.
NOTE: For a more complete and up-to-date information on Linux support, please visit HP Linux Web
site at: http://h18000.www1.hp.com/products/servers/linux/hpLinuxcert.html.
NOTE: For more Linux OS support & certification information, please visit our the ProLiant &
Bladesystem Server Linux matrix http://h18004.www1.hp.com/products/servers/linux/hpLinuxcert.html
Supported Software
Options
Availability
Security
VMware Virtualization Software
NOTE: For more information on HP's Certified and Supported HP ProLiant Servers, please visit the
VMware Server Support Matrix at:
http://h18004.www1.hp.com/products/servers/software/vmware/hpvmwarecert.html
Dual Port Fibre Channel Mezzanine Card (optional) for redundant SAN connection
Two hot plug SAS/SATA hard drive bays and integrated RAID (Smart Array E200i) controller on
every server blade (Battery-backed write cache is optional)
Redundant ROM on every server blade
Advanced ECC Memory support on every server blade - Advanced ECC can actually correct a
multi-bit error (up to 4 bits) that occurs within one memory chip
Redundant fan design on every server blade - The HP ProLiant BL25p G2 server features five (5)
integrated fans for sufficient cooling. A single fan can fail without interrupting server operations
indefinitely
Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted load
balancing)
Power-on password
Administrator's password
Integrated Lights-Out has 12 customizable user accounts and SSL encryption
Integrated Lights-Out can be disabled via a Global Setting
DA - 12569
North America — Version 10 — December 14, 2007
Page 8
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Standard Features
Factory Express Portfolio
for Servers and Storage
HP Factory Express offers configuration, customization, integration and deployment services for HP
servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging and custom packaging. HP products supported through Factory Express include: a wide array of
servers and storage: HP Integrity, HP ProLiant & HP ProLiant Server Blades, HP BladeSystem, HP 9000
servers as well as the MSA1000, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services for your specific server model please contact your sales
representative or go to http://www.hp.com/go/factory-express.
HP Enterprise
Configurator
The HP eCo-Enterprise Configurator now provides factory default racking for our HP hardware portfolio.
This approach is aligned with our strategic direction to meet the needs and expectations of our valued
customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or
an Authorized Partner for assistance.
Service and Support
This product is covered by a global limited warranty and supported by HP Services and a worldwide
network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for
three years from date of purchase. Support for software and initial setup is available for 90 days from
date of purchase. Additional support may be covered under the warranty or available for an additional
fee. Enhancements to warranty services are available through HP Care Pack services or customized
service agreements.
NOTE: Server Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. Additional
information regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
NOTE: Server Blade Limited Warranty includes 3 year Parts, 1 year Labor, 1-year on-site support. This
warranty supports the HP ProLiant 35p Server Blades.
NOTE: Server Blade Enclosure Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site
support.
NOTE: Server Blade Interconnect Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site
support.
NOTE: The p-Class SAN switch limited warranty is unique to the SAN switch which includes 1 year
warranty that is upgradeable to 3 years via Care Pack
HP services provide total care and support expertise with committed response designed to meet your IT
and business needs.
The HP Care Pack services ProLiant BL p-Class server blades, cover the server blade and all HP branded
hardware options qualified for the server, purchased at the same time or afterwards, internal to the
server.
HP Care Pack services for HP BladeSystem p-Class server blade enclosure covers the enclosure including
patch panels, HP supported Ethernet interconnects, power enclosure with power supplies and power
distribution.
To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly
understands your server technology and systems environment. HP Services, an industry leader in
provision of multi vendor support solutions provides a range of support services designed to meet the
varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support
DA - 12569
North America — Version 10 — December 14, 2007
Page 9
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Standard Features
offer to help you speedily deploy and maximize system uptime.
Recommended Service - Simplify ProLiant solution implementation, maintenance and management.
Support Service - 4-Hour Response Coverage, 3-Year, 24 x 7, Same Business Day
Deployment Service - Installation and Start Up for HP BladeSystem Infrastructure
Enhanced Service - Optimize service level to increase IT performance and availability
Support Service - HP Proactive BladeSystem Service, 1-Year
Deployment Service - Enhanced Network Installation and Start-up for HP BladeSystem Switches
Installation & Start-Up service for HP BladeSystem Infrastructure plus HP BladeSystem Enhanced Network
Installation and Start-UP as per the Customer Description and/or Data Sheet. To be delivered on a
scheduled basis 8am-5pm, M-F, excluding HP holidays.
For a complete listing of service offerings and information visit:
http://www.hp.com/services/bladesystemservices
http://www.hp.com/go/proliant/carepack
DA - 12569
North America — Version 10 — December 14, 2007
Page 10
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Models
Dual-Core Models
HP ProLiant BL25p G2
2220 DC, 2GB (1P)
438211-B21
Processor(s)
ProLiant BL25p G2 2218
2GB (1P)
408666-B21
Cache Memory
ProLiant BL25p G2 2216 Memory
One of the following
HE 2GB (1P)
depending on model
408665-B21
Network Adapter
ProLiant BL25p G2 2214
HE 2GB (1P)
Storage Controller
408664-B21
ProLiant BL25p G2 2210 Hard Drives
Internal Storage
HE 1GB (1P)
408663-B21
Optical Drive
Form Factor
DA - 12569
(1) AMD Opteron™ processor Model 2220 (2.8 GHz, 95W) Processor
Option Kit
(1) AMD Opteron processor Model 2218 (2.6 GHz, 95W)
(1) Low Power AMD Opteron processor Model 2216 HE (2.4 GHz, 68W)
(1) Low Power AMD Opteron processor Model 2214 HE (2.2 GHz, 68W)
(1) Low Power AMD Opteron processor Model 2210 HE (1.8 GHz, 68W)
1MB Level 2 cache memory per core (2MB total)
2 GB (2 x 1 GB) PC2-5300, Registered DDR2-667
1 GB (2 x 512 MB) PC2-5300, Registered DDR2-667
Two (2) embedded NC373i Multifunction Gigabit Network Adapters; one (1)
additional 10/100 NIC dedicated to iLO 2 management
Smart Array E200i Controller with 64MB (optional 128MB battery-backed
write cache module available)
(2) SFF SAS/SATA drive bays; no hard drives ship standard
Up to 292GB SFF SAS (with optional hot plug hard disk drives)
Up to 120GB SFF SATA (with optional hot plug hard disk drives)
None
Up to 8 HP BL25p G2 server blades plug vertically an HP BladeSystem pClass server blade enclosure. Please visit the enclosure compatibility matrix
at http://www.hp.com/go/bladesystem/enclosure/compatibility
North America — Version 10 — December 14, 2007
Page 11
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Configuration Information Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Blade.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: FIO indicates that this option is only available as a Factory Installable Option.
Step 1: Base Server Blade Configuration
Models
HP ProLiant BL25p G2 CTO Blade
Configurable Model ships with:
Two (2) embedded NC373i Multifunction Gigabit Network Adapters plus one (1)
additional 10/100 NIC dedicated to iLO 2 management
Integrated Smart Array E200i controller
NOTE: Controller cache module selection is required. Select either the standard 64
MB cache module or the optional 128 MB battery-backed write cache (BBWC)
module in step 2 below.
Two small form factor (SFF) SAS or SATA hot plug hard drive bays
Integrated Lights-Out 2 Standard Blade Edition
404839-B21
Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
Processors
AMD Opteron™ processor Model 2220 (2.8 GHz, 95W) Processor Option Kit, FIO
Base
NOTE: If 2 processors are desired, select one 438213-L21 and one 438213-B21.
AMD Opteron processor Model 2218 (2.6 GHz, 95W) Option Kit, FIO Base
NOTE: If 2 processors are desired, select one 409380-L21 and one 409380-B21.
AMD Opteron processor Model 2216 (2.4 GHz, 95W) Option Kit, FIO Base
NOTE: If 2 processors are desired, select one 409381-L21 and one 409381-B21.
AMD Opteron processor Model 2210 (1.8 GHz, 95W), Option Kit, FIO Base
NOTE: If 2 processors are desired, select one 415619-L21 and one 415619-B21.
Low Power AMD Opteron processor Model 2216 HE (2.4 GHz, 68W) Option Kit,
FIO Base
NOTE: If 2 processors are desired, select one 415620-L21 and one 415620-B21.
Low Power AMD Opteron processor Model 2214 HE (2.2 GHz, 68W) Option Kit,
FIO Base
NOTE: If 2 processors are desired, select one 409383-L21 and one 409383-B21.
Low Power AMD Opteron processor Model 2212 HE (2.0 GHz, 68W) Option Kit,
FIO Base
NOTE: If 2 processors are desired, select one 415621-L21 and one 415621-B21.
Low Power AMD Opteron processor Model 2210 HE (1.8 GHz, 68W) Option Kit,
FIO Base
NOTE: If 2 processors are desired, select one 432811-L21 and one 432811-B21.
DA - 12569
North America — Version 10 — December 14, 2007
438213-L21
409380-L21
409381-L21
415619-L21
415620-L21
409383-L21
415621-L21
432811-L21
Page 12
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Configuration Information Factory Integrated Models
Memory
Communications
HP 1GB REG PC2-5300 2x512MB 1RANK Kit
HP 2GB REG PC2-5300 2x1GB 1RANK Kit
HP 4GB REG PC2-5300 2x2GB 2RANK Kit
HP 8GB REG PC2-5300 2x4GB 2RANK Kit
NOTE: Must be installed in pairs. For additional memory configuration guidelines,
see "Memory" section of this HP BL25p G2 QuickSpecs.
64 MB Cache - FIO Only
128MB Battery-Backed Write Cache with Battery Housing
NOTE: Supports the Smart Array E200i Controller.
408850-B21
408851-B21
408853-B21
408854-B21
405102-B21
346914-B21
Step 3: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "options" section below. For server blade enclosures, interconnect options, and
power subsystem options; please see the following QuickSpecs:
HP BladeSystem p-Class Infrastructure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12330_na/12330_na.HTML
and HP BladeSystem p-Class Interconnect Components QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12331_na/12331_na.HTML
And/or refer to the "Options" section below.
DA - 12569
North America — Version 10 — December 14, 2007
Page 13
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Options
Communications
Fibre Channel
Adapters
HP Insight Control and
ProLiant Essentials
Offerings
HP NC320m PCI Express Dual Port Gigabit server adapter for HP BladeSystem
Or upgrade to:
HP NC374m PCI Express Dual Port Multifunction Gigabit server adapter for HP
BladeSystem
NOTE: There are two mezzanine adapter card connectors on the HP BL25p G2
motherboard. There is a dedicated networking connector which supports one (1)
optional Ethernet NIC mezzanine adapter card, either the HP NC320m PCI Express
Dual Port Gigabit server adapter or the HP NC374m PCI Express Dual Port
Multifunction Gigabit server adapter. The other connector(s) is dedicated for the
optional, fibre channel mezzanine card adapter.
405095-B21
HP QLogic-based dual port Fibre Channel Adapter
NOTE: Includes two small form factor pluggable transceivers with LC connectors for
installation into the Patch Panel 2, CGESM or GbE2 Interconnect Switch (with the
Storage Connectivity Kit.)
HP Emulex-based dual port Fibre Channel Adapter for p-Class BladeSystem
NOTE: SFPs for use with pass through SAN switches not included with the Emulexbased Fibre Channel Adapter. If SFPs are required, please order the SFP option kit
(P/N 397577-B21) which includes 2-2Gb SFPs per option kit.
HP 2-2Gb SFP for Fibre Channel pass through kit
NOTE: Must select if SFP for use with pass through SAN switches is required when
ordering Emulex based Fibre Channel Mezzanine card for HP p-Class BladeSystem
(P/N 394757-B21).
361426-B21
Insight Control Environment for BladeSystem
HP Insight Control Environment for BladeSystem, No Media 1-Server License including
1 year of 24x7 Technical Support and Updates
NOTE: Contains 1 license for each of RDP, PMP, VPM, IPM and iLO Select. Includes
one year of 24 x 7 HP Software Technical Support and Update Service.
NOTE: For additional License Kits, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12631_div/12631_div.HTML
ProLiant Essentials Value Packs
NOTE: Electronic licensing options are available for Insight Control suites and select
NOTE
ProLiant Essentials software products. Please see the appropriate Insight Control and
ProLiant Essentials QuickSpecs for additional information.
Rapid Deployment Pack
ProLiant Essentials Rapid Deployment Pack No Media 1-Server License including 1
year of 24x7 Technical Support and Updates
NOTE: This license allows 1 server to be deployed and managed via RDP. Customer
will receive a printed license entitlement certificate via physical shipment. The license
entitlement certificate must be redeemed online or via fax in order to obtain the
license activation key(s). Includes one year of 24 x 7 HP Software Technical Support
and Update Service.
ProLiant Essentials BL p-Class Server Blade Enclosure with Enhanced Backplane
Components and RDP Software Option Kit - 8 server
NOTE: This license allows 8 servers to be deployed and managed. Only available
with the purchase of ProLiant BL p-Class server blade enclosure
(Blade Enclosure QS only)
DA - 12569
North America — Version 10 — December 14, 2007
405094-B21
394757-B21
397577-B21
453484-B21
452151-B21
281404-B22
Page 14
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Options
NOTE: For additional ProLiant Essentials Rapid Deployment Pack License Kits please
see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11053_div/11053_div.HTML
Server Migration Pack - Universal Edition
HP Server Migration Pack - Universal Edition, No Media, Physical / Virtual to ProLiant
Single Migration License, including 1 year of 24x7 Technical Support
NOTE: This license allows 1 physical to ProLiant or virtual to ProLiant migration.
Customer will receive a printed license entitlement certificate and documentation via
physical shipment. The license entitlement certificate must be redeemed online or via
fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support Service
HP Server Migration Pack - Universal Edition, No Media, Physical / Virtual to Virtual
Single Migration License, including 1 year of 24x7 Technical Support
NOTE: This license allows 1 physical to virtual or virtual to virtual migration.
Customer will receive a printed license entitlement certificate and documentation via
physical shipment. The license entitlement certificate must be redeemed online or via
fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support Service.
HP Server Migration Pack - Universal Edition, No Media, 1-Year Unlimited Migration
License, including 1 year of 24x7 Technical Support
NOTE: This license allows unlimited migrations (physical to ProLiant, physical to
virtual, virtual to virtual, and virtual to ProLiant) for one year. Customer will receive a
printed license entitlement certificate and documentation via physical shipment. The
license entitlement certificate must be redeemed online or via fax in order to obtain
the license activation key(s). Includes one year of 24 x 7 HP Software Technical
Support Service
NOTE: For additional Server Migration Pack - Universal Edition License Kits please
see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12855_div/12855_div.HTML
Virtual Machine Management Pack
ProLiant Essentials Virtual Machine Management Pack, No Media, 1-Server License,
including 1 year of 24x7 Technical Support and Updates
NOTE: Customer will receive a printed license entitlement certificate via physical
shipment. The license entitlement certificate must be redeemed online or via fax in
order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software
Technical Support and Update Service..
NOTE: For additional ProLiant Virtual Machine Management Pack License Kits please
see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12328_div/12328_div.HTML
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to http://www.hp.com/servers/proliantessentials or the various
ProLiant Essentials Value Pack product QuickSpecs for more information.
NOTE: For more information regarding ProLiant Essentials Software, please see the
following URL: http://www.hp.com/servers/proliantessentials.
Remote Management
NOTE: Electronic licensing options are available for Insight Control suites and select
ProLiant Essentials software products. Please see the appropriate Insight Control and
ProLiant Essentials QuickSpecs for additional information.
ProLiant Essentials Integrated Lights-Out Select Pack
ProLiant Essentials Integrated Lights-Out Select Pack, No Media, 1-Server License
DA - 12569
North America — Version 10 — December 14, 2007
460750-B21
460753-B21
460756-B21
452153-B21
452158-B21
Page 15
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Options
Featuring: sophisticated remote control and security features for HP BladeSystem
servers and ProLiant ML/DL servers in text console environments.
NOTE: For additional ProLiant Essentials Integrated Lights-Out Packs please see the
QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12362_div/12362_div.HTML
HP Insight Control Linux
Edition for HP
BladeSystem
Processor
HP Insight Control Linux Edition - MEDIA KIT
NOTE: This optional Media pack CD contains the ISO image for the HP Insight
Control Linux Edition management appliance (see support servers below under
"Management appliance (host) supported servers"). Servers must be acquired
separately. For information on HP ProLiant Servers please visit:
http://h18000.www1.hp.com/products/quickspecs/North_America/11070.html
NOTE: This Media pack is optional because the latest ISO image and latest updates
may be downloaded at no cost from: http://www.hp.com/go/controltower (click on
Download button from this page).
HP Insight Control Linux Edition 1.6 -No Media, 1-Server License, including 1 year of
24x7 Technical Support and Updates
NOTE: This license allows one (1) server blade to be deployed and managed via HP
Insight Control Linux Edition.
HP Insight Control Linux Edition 1.6,No Media, 8-Server License, including 1 year of
24x7 Technical Support and Updates
NOTE: This license allows eight (8) server blades to be deployed and managed via
HP Insight Control Linux Edition.
HP Insight Control Linux Edition 1.6, No Media, Flexible-Quantity License, including 1
year of 24x7 Technical Support and Updates
NOTE: For use with multiple servers (minimum of 5). This part number allows you to
specify the license quantity. When ordering this part number, the quantity ordered will
be the number of licenses embedded in a single activation key. A single kit containing
that key is then delivered to you.
412956-B22
AMD Opteron™ processor Model 2220 (2.8 GHz, 95W) Processor Option Kit
AMD Opteron processor Model 2218 (2.6 GHz, 95W) Option Kit
AMD Opteron processor Model 2216 (2.4 GHz, 95W) Option Kit
AMD Opteron processor Model 2210 (1.8 GHz, 95W), Option Kit
Low Power AMD Opteron processor Model 2216 HE (2.4 GHz, 68W) , Option Kit
Low Power AMD Opteron processor Model 2214 HE (2.2 GHz, 68W), Option Kit
Low Power AMD Opteron processor Model 2212 HE (2.0 GHz, 68W), Option Kit
Low Power AMD Opteron processor Model 2210 HE (1.8 GHz, 68W), Option Kit
NOTE: AMD Opteron 2000 Series processors are 64-bit, dual-core, and support
AMD Virtualization™ and DDR2 memory technology. AMD Opteron 2000 Series
processors are connected through 1 GHz HyperTransport™ links.
438213-B21
409380-B21
409381-B21
415619-B21
415620-B21
409383-B21
415621-B21
432811-B21
DA - 12569
North America — Version 10 — December 14, 2007
452155-B21
452156-B21
452157-B21
Page 16
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Options
Memory
(SDRAM DIMMs)
HP 1GB REG PC2-5300 2x512MB 1RANK Kit
HP 2GB REG PC2-5300 2x1GB 1RANK Kit
HP 4GB REG PC2-5300 2x2GB 2RANK Kit
HP 8GB REG PC2-5300 2x4GB 2RANK Kit
NOTE: Must be installed in pairs. For additional memory configuration guidelines,
see "Memory" section of this HP BL25p G2 QuickSpecs.
Hard Drives
Serial Attached SCSI (SAS) SFF Hot Plug
HP 72GB 3G SAS 15k SFF DP HDD
HP 72GB 3G SAS 15K SFF SP HDD
HP 36GB 3G SAS 15K SFF DP HDD
HP 36GB 3G SAS 15K SFF SP HDD
HP 146GB 3G SAS 10K SFF DP HDD
HP 146GB 3G SAS 10K SFF HDD
HP 72GB 3G SAS 10K SFF DP HDD
HP 72GB 3G SAS 10K SFF SP HDD
HP 36GB 3G SAS 10K SFF SP HDD
NOTE: SAS drives have a 3 year warranty.
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such
as capacity, height, width, interface, transfer rate, seek time, physical configuration,
and operating temperature:
http://h18000.www1.hp.com/products/quickspecs/12244_na/12244_na.HTML
Serial-ATA (SATA) SFF Hot Plug
HP 120GB 1.5G SATA 5.4K SFF HDD
HP 60GB 1.5G SATA 5.4K SFF HDD
NOTE: SATA drives have a 1 year warranty. Please see the SATA Hard Drive
QuickSpecs for Technical Specifications such as capacity, height, width, interface,
transfer rate, seek time, physical configuration, and operating temperature:
http://h18000.www1.hp.com/products/quickspecs/11940_na/11940_na.HTML
408850-B21
408851-B21
408853-B21
408854-B21
418371-B21
431935-B21
418369-B21
431933-B21
418367-B21
431958-B21
384842-B21
375861-B21
375859-B21
431786-B21
379306-B21
Controller Cache
128 MB Battery-Backed Cache Enabler
NOTE: Supports the Smart Array E200i Controller.
346914-B21
HP BladeSystem p-Class
Other Options
HP BladeSystem p-Class Diagnostic Station
NOTE: The Diagnostic Station allows access to the HP ProLiant p-Class server blades
and the BL p-Class interconnect switch outside of the server blade enclosure. The
option provides power and a data interface so that "offline" upgrade and diagnostic
functions may be performed.
230743-B21
HP StorageWorks
Modular Smart Array
1500 cs
HP StorageWorks Modular Smart Array 1500
NOTE: Please see the StorageWorks Modular Smart Array 1500 cs QuickSpecs for
additional options and configuration information at:
http://www.hp.com/go/MSA1500cs
DA - 12569
North America — Version 10 — December 14, 2007
AA986A
Page 17
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Options
HP StorageWorks
Options
HP StorageWorks Fibre Channel Mezzanine Host Bus Adapter
NOTE: Support HP ProLiant BL25p/45p Server Blades
394588-B21
Cluster Options
ProLiant Cluster Starter Kit
NOTE: For additional information regarding the ProLiant Cluster Starter Kit please see
the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11935_na/11935_na.html
HP HA/F200 for Entry SAN Cluster
NOTE: For additional information regarding the ProLiant Cluster for Entry Level SAN
please see the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11932_na/11932_na.html
ProLiant Cluster HA/F500 for the Enterprise SAN
NOTE: For additional information regarding the ProLiant Cluster HA/F500 for
Enterprise SAN please see the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11933_na/11933_na.html
NOTE: For configuration/certification options for the HP Parallel Database Cluster for
Oracle RAC please go to: http://www.hp.com/solutions/highavailability/oracle
HP Serviceguard for Linux ProLiant Cluster, A.11.18 (2 license version - Red Hat EL
4&5, SUSE SLES10)
HP Serviceguard for Linux, A.11.18 (single license version - Red Hat EL 4&5, SUSE
SLES10)
HP Serviceguard for Linux and Red Hat Global File System - 1 year subscription
HP Serviceguard for Linux and Red Hat Global File System - 3 years subscription
NOTE: For additional information regarding the HP Serviceguard for Linux License,
please see the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11518_na/11518_na.html
364023-B22
USB Options
HP USB 2-Button Optical Mouse (Carbonite)
HP USB 04 Standard Keyboard
USB 2.0 4-port HUB
HP 1GB USB 2.0 Floppy Drive Key
HP 256MB USB 2.0 Floppy Drive Key
External USB 2.0 Multi-Bay II Cradle
Multibay II 9.5mm DVD Drive
HP Rack 5000 Series
(Graphite Metallic)
HP 5642 Rack - Unassembled
NOTE: Please see the HP Rack 5642 QuickSpecs for additional part numbers and
Technical Specifications such as height, width, depth, weight, and color:
http://h18000.www1.hp.com/products/quickspecs/12074_na/12074_na.HTML
NOTE: For additional information regarding Rack Cabinets, please see the following
URL: http://www.hp.com/go/rackandpower.
DA - 12569
North America — Version 10 — December 14, 2007
364026-B22
364024-B21
305199-B27
307754-B27
T2798AA#001
T2798AA#003
DC172B
DT528A#ABA
DG954A
442085-B21
442084-B21
PA509A
PA849A
358254-B21
Page 18
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Options
HP Rack 10000 G2
10647 G2 (47U) Rack Cabinet - Pallet
Series (Graphite Metallic) 10642 G2 (42U) Rack Cabinet - Pallet
10642 G2 (42U) Rack Cabinet - Shock Pallet
10642 G2 (42U) Rack Cabinet - Crated
10642 G2 (42U) Rack Cabinet, with Extension - Shock Pallet
10636 G2 (36U) Rack Cabinet - Shock Pallet
10636 G2 (36U) Rack Cabinet - Crated
10636 G2 (36U) Rack Cabinet, with Extension - Shock Pallet
10636 G2 (36U) Rack Cabinet, without door - Shock Pallet
10622 G2 (22U) Rack Cabinet - Pallet
10622 G2 (22U) Rack Cabinet - Shock Pallet
10842 G2 (42U) 800mm Wide Rack Cabinet - Pallet
10842 G2 (42U) 800mm Wide Rack Cabinet - Shock Pallet
NOTE: Please see the Rack 10000 G2 QuickSpecs for additional part numbers and
Technical Specifications such as height, width, depth, weight, and color:
http://h18000.www1.hp.com/products/quickspecs/12402_na/12402_na.HTML
NOTE: For additional information regarding Rack Cabinets, please see the following
URL: http://www.hp.com/go/rackandpower.
HP Rack 10000 Series
(Graphite Metallic)
HP S10614 (14U) Rack Cabinet - Shock Pallet
NOTE: Server Blade Enclosures must be field integrated into the 10842 racks. Factory
integration of Server Blade Enclosures into the 10842 is not supported.
HP 10647 (47U) Rack Cabinet - Shock Pallet
HP 10622 (22U) Rack Cabinet - Crated
NOTE: xxxxxx-B22 (shock pallet) used to ship racks with equipment installed (by
custom systems, VARs and Channels). xxxxxx-B23 (crated) used for air shipments of
empty racks.
NOTE: It is mandatory to use a shock pallet in order to ship racks with equipment
installed.
NOTE: Please see the Rack 10000 QuickSpecs for additional part number and
Technical Specifications such as height, width, depth, weight, and color:
http://h18000.www1.hp.com/products/quickspecs/10995_na/10995_na.HTML
NOTE: For additional information regarding Rack Cabinets, please see the following
URL: http://www.hp.com/go/rackandpower.
DA - 12569
North America — Version 10 — December 14, 2007
AF031A
AF001A
AF002A
AF003A
AF004A
AF011A
AF012A
AF013A
AF014A
AF021A
AF022A
AF041A
AF042A
292302-B22
245160-B23
245163-B23
Page 19
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Options
Monitors and Keyboards TFT7210R Rack Mounted 17" Monitor
TFT7600 Rackmount Keyboard Monitor
1U Rackmount Keyboard with USB
NOTE: For additional information regarding Rack Options, please see the following
URL: http://www.hp.com/go/rackandpower.
348373-B21
AG052A
AG072A
HP KVM Switch Options
336044-B21
336045-B21
262588-B21
262587-B21
336047-B21
373035-B21
AF100A
Server Console Switch (KVM), 0 x 1 x 8 port
Server Console Switch (KVM), 0 x 2 x 16 port
PS/2 Interface Adapter, 1 pack
PS/2 Interface Adapter, 8 pack
USB Interface Adapter, 1 pack
Serial Interface adapter - 1 Pack with power supply
BladeSystem p-Class KVM Interface Adapter
NOTE: For additional information regarding KVM switches, Serial Console servers,
rack mount monitors, keyboards and all related options please see the following URL:
http://www.hp.com/go/kvm
HP Serial Console Server HP 16 Port Serial Console Server
Options
HP 48 Port Serial Console Server
Serial Adapter, RJ45-DB9 DCE Female, 1 Pack
Serial Adapter, RJ45-DB9 DCE Female, 8 Pack
NOTE: Cat5e cables are required to connect Serial Adapters to Serial Console
Servers. Additional Serial Adapters and Cat5e cables can be found at the following
URL: http://www.hp.com/go/kvm.
Service and Support
NOTE: The HP Care Pack service part numbers below for HP BladeSystem p-Class
Offerings (HP Care Pack server blades, cover the server blade and all HP branded hardware options qualified
Services)
for the server, purchased at the same time or afterwards, internal to the server.
Hardware Services On-site Service
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
NOTE: The HP Care Pack service part numbers below for HP BladeSystem p-Class
server blade enclosure covers the enclosure including patch panels, HP supported
Ethernet interconnects, power enclosure with power supplies and power distribution.
Hardware Services On-site Service
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
NOTE: The HP Care Pack service part numbers below covers the HP BladeSystem
Brocade and McData SAN Switches.
Hardware Services On-site Service
DA - 12569
North America — Version 10 — December 14, 2007
AF101A
AF102A
AF103A
AF110A
UD187E
UD188E
UD189E
HC031E
HC032E
HC033E
Page 20
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Options
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years, Electronic
Hardware Installation, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, (24 port) Electronic
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Installation & Start-up Services
HP Installation & Startup Service for HP BladeSystem Infrastructure
NOTE: provides for an integrated hardware and software implementation that
includes remote service planning, onsite deployment of hardware and software,
installation verification testing and customer orientation. Hardware deployment covers
the installation of a single BladeSystem enclosure that include server blades (up to
16), Ethernet network interconnect, and power options. Software deployment covers
the installation and configuration of HP Systems Insight Manager (SIM), HP Rapid
Deployment Pack (RDP), and deploy up to two operating system editions of either
Windows or Linux, using scripted operating system installation software.
Installation and Start Up Service for HP BladeSystem
ProLiant BL p-Class Blade Server Hardware Installation, Electronic
HP BladeSystem p-Class Enclosure and Server Blade Hardware Installation, Electronic
Installation and Start-up of Rapid Deployment Pack, Electronic
NOTE: Provides for the installation on a Customer supplied server designated as a
Deployment Server. Includes the deployment of a single server. This new server will be
deployed using either one of the pre-configured scripts or an image. In addition, the
service will provide for the capture and storage of the configuration of the newly
deployed server and orientation on product usage. To be delivered during standard
office ours, standard office days.
Provides for the Installation and Start-up of Rapid Deployment Pack Implementation of
Rapid Deployment Pack (Basic) (Electronic)
HP ProLiant Essentials Vulnerability and Patch Management Pack Installation and
Startup Service. (Electronic)
NOTE: Service coverage: onsite installation of the Vulnerability and Patch
Management (VPM) software on a customer designated server, configuration of the
VPM software to acquire security patches, enabling the VPM software to scan up to
five (5) systems, applying the security patches to the designated servers, generating a
report from VPM that shows the vulnerability assessment results, and providing
customer with an orientation to the software.
Provides for the Installation and Start-up of System Insight Manager (Electronic)
Provides for the Installation and Start-up of System Insight Manager (Electronic)
NOTE: For more information, customer/resellers can contact
http://www.hp.com/hps/carepack/services/
Software Operating Environment Care Packs
Microsoft Software Operating Environment Software Telephone 9x5 - 3 incident
(Electronic)
Red Hat Software Operating Environment Software Telephone 9x5 - 10 incident
(Electronic)
SUSE Software Operating Environment Software Telephone 9x5 - 3 incident
(Electronic)
DA - 12569
North America — Version 10 — December 14, 2007
UC007E
U5988E
UE438E
UC008E
UC009E
UC023E
UC905E
UE604E
UA219E
U4971E
U5683E
UA042E
UC929E
UA041E
UA040E
U8169E
U3402E
U9615E
Page 21
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Options
ProLiant Essentials Operating Environment, - 5 Day, 8x5,1 year, 3 incident (Electronic)
Software Operating Environment Care Packs
NOTE: For more information, customer/resellers can contact
http://www.hp.com/hps/carepack/services/
HP Proactive BladeSystem Service Care Pack
1 Year, HP Proactive BladeSystem Service
NOTE: For more information, customer/resellers can contact
http://www.hp.com/services/proactivebladeservice
DA - 12569
North America — Version 10 — December 14, 2007
U8222E
UG858E
Page 22
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Memory
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
DIMM Installation Rules:
1.
2.
3.
4.
5.
6.
7.
All DIMMs must be PC2-5300 Registered DDR2 DIMMs (667 MHz.)
Both DIMM slots in a memory bank must be populated.
Both DIMMs in a memory bank must be identical.
Processor 1 memory bank A must always be populated.
DIMM banks are active only when the corresponding processor socket is populated.
If installing only one bank on a processor, populate the bank physically farthest from the processor.
If mixing DIMM sizes on the same processor, the largest capacity DIMMs must be populated in the bank physically farthest
from the processor. The smallest capacity DIMMs must be populated in the bank physically nearest the processor.
8. For optimal performance in most applications, populate the first memory bank for every populated processor socket.
HP ProLiant BL25p G2 Server Blade (1P Model)
Standard Memory
1024-MB (2 x 512 MB) or 2048-MB (2 x 1024 MB) (depending on model) of PC2-5300, Registered DDR2-667 DIMMs.
Standard Memory Plus Optional Memory
Up to 25600-MB or 26624-MB (depending on model) of PC2-5300, Registered DDR2-667 DIMMs is available with the installation
of optional PC2-5300, Registered DDR2-667 DIMM memory expansion kits.
Standard Memory Replaced with Optional Memory
Up to 32768-MB of PC2-5300, Registered DDR2-667 DIMMs. Memory is available with the removal of standard memory and the
installation of optional PC2-5300, Registered DDR2-667 DIMM memory expansion kits.
Memory
Standard
Optional
Optional
Optional
Maximum
1024 MB
2048 MB
25600 MB
26624 MB
32768 MB
1A
512 MB
1024 MB
4096 MB
4096 MB
4096 MB
Slot
2A
3B
4B
5C
6C
7D
8D
Empty
Empty
Empty
Empty
Empty
Empty
512 MB
Empty
Empty
Empty
Empty
Empty
Empty
1024 MB
512 MB 4096 MB 4096 MB 4096 MB 4096 MB
4096 MB 512 MB
4096 MB 1024 MB 1024 MB 4096 MB 4096 MB 4096 MB 4096 MB
4096 MB 4096 MB 4096 MB 4096 MB 4096 MB 4096 MB 4096 MB
Following are memory options available from HP:
HP 1GB REG PC2-5300 2x512MB 1RANK Kit
HP 2GB REG PC2-5300 2x1GB 1RANK Kit
HP 4GB REG PC2-5300 2x2GB 2RANK Kit
HP 8GB REG PC2-5300 2x4GB 2RANK Kit
DA - 12569
North America — Version 10 — December 14, 2007
408850-B21
408851-B21
408853-B21
408854-B21
Page 23
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Storage
1
2
3-4
Power On/Standby button
Local I/O cable connector*
Two (2) SFF SAS or SATA Hot Plug Hard Drives
NOTE: *The local I/O connector is used with the local I/O
cable to perform server blade configuration and diagnostic
procedures.
Drive Support
SFF SAS Hard Drives Hot Plug
Quantity
Supported
2
Position
Supported
3-4
Controller
Integrated Smart Array E200i Controller
SFF SATA Hard Drives Hot Plug
Quantity
Supported
120 GB 5,400 rpm SATA
2
60 GB 5,400 rpm SATA
Position
Supported
3-4
Controller
Integrated Smart Array E200i Controller
72 GB 15,000 rpm SAS
SFF SP
36 GB 15,000 rpm SAS
SFF SP
146 GB 10,000 rpm SAS
72 GB 10,000 rpm SAS
SFF SP
36 GB 10,000 rpm SAS
SFF SP
Power Specifications
To review typical system power ratings use the Active Answers Power Calculator which is available via the online tool located at URL:
http://www.hp.com/go/bladesystem/powercalculator
DA - 12569
North America — Version 10 — December 14, 2007
Page 24
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Technical Specifications
System Unit
Dimensions (HxWxD)
Weight (maximum)
Range*
Temperature Range
1.69 in (4.29 cm) x 10.29 in (26.14 cm) x 28.00 in (71.1 cm)
18.19 lb (8.25 kg)
Operating
50° to 95° F (10° to 35° C)
Shipping
-40° to 140° F (-40° to 60° C)
Storage
-4 to 140° F (-20° to 60° C)
Relative Humidity**
Operating
10% to 90%
Humidity
(non-condensing)
Shipping
10% to 90%
Storage
10% to 95%
Wet Bulb Temperature
Maximum
86° F (30° C)
*NOTE:
NOTE: All temperature ratings shown are for sea level. An altitude derating of 1° C per 304.8 m (1.8°
F per 1,000 ft) to 3048 m (10,000 ft) is applicable. No direct sunlight allowed. Upper operating limit is
3,048m (10,000 ft) or 70 Kpa/10.1 psia. Upper non-operating limit is 9,144 m (30,000 ft) or 30.3
KPa/4.4 psia.
**NOTE:
NOTE: Storage maximum humidity of 95% is based on a maximum temperature of 45° C (113° F).
Altitude maximum for storage corresponds to a pressure minimum of 70 KPa.
Smart Array E200i
Controller (with optional
battery-backed write
cache)
Disk Drive and Enclosure 3G SAS (Serial Attached SCSI)
Interface
1.5G SATA (Serial Advanced Technology Attachment)
DDR-1/266 MHz provides up to 4.2 GB/s maximum bandwidth.
Cache Memory Speed
x4 2.5G PCIe provides 2GB/s maximum bandwidth.
Server Interface
x2 3G SAS provides 600MB/s maximum bandwidth.
SAS Speed
40-bit 64MB or 128MB cache: ECC protection, battery-backed, and
Cache Memory
transportable
Logical Drives Supported Up to 32 logical volumes
Maximum Logical Drive 292GB (2 x 146GB)
Capacity
Host Memory Addressing 64-bit, supporting greater than 4GB server memory space
RAID 1 (Mirroring)
RAID Support
RAID 0 (Striping)
Upgradeable Firmware
Upgradeable Firmware
Two (2) Embedded
Network Interface
NC373i Multifunction
Data Transfer Method
Gigabit Network Adapters
Network Transfer Rate
DA - 12569
Blackplane connection
PCI-Express, four lanes
(x4)
1000Mbps
North America — Version 10 — December 14, 2007
Page 25
QuickSpecs
HP ProLiant BL25p Generation G2 (G2) Server Blade
Technical Specifications
Environment-friendly
Products and Approach
End-of-life Management
and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may
be used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation.
AMD, the AMD Arrow logo, AMD Opteron™, and combinations thereof, are trademarks of Advanced Micro Devices, Inc.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For hard drives, 1 GB = 1 billion bytes. Actual formatted capacity is less.
DA - 12569
North America — Version 10 — December 14, 2007
Page 26
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement