wired microphones
WIRED MICROPHONES
632
AU DI O T E C H NI C A
LAVALIER MICS
Miniature Condenser Microphones
Designed to be worn on the clothing of performers, Audio-Technica’s miniature
condenser microphones provide excellent yet unobtrusive sound pickup. Their
mic element is enclosed in a rugged housing with low-reflectance finish and
internal construction minimizes handling and clothing noise. The wide-range
capability of these mics ensure clean, accurate reproduction with high
intelligibility for lecturers, singers, and stage performers.
Frequency Response
Maximum SPL Input (Phantom/Battery)
Dynamic Range-Typical (Phantom/Battery)
AT803B
AT831b
and
AT831R
MT830R
AT-803b
AT-831b
AT-831R
MT830R
30Hz - 20kHz
40Hz - 20kHz
40Hz - 20kHz
30Hz - 20kHz
135 dB / 121 dB
135 dB / 121 dB
141 dB
131 dB
106 dB/92dB
106 dB/92dB
112 dB
107 dB
Phantom Power
9 - 52v
9 - 52v
9 - 52v
9 - 52v
Battery Type
1.5V AA
1.5V AA
—
—
18dB/oct @ 150 Hz
18dB/oct @ 80 Hz
—
—
AT803 / AUAT803
AT831B / AUAT831B
AT831R / AUAT831R
MT830R / AUMT830R
142.00
149.95
199.95
179.95
Low-Frequency Roll-off
Mfr# / B&H #
Price
AT803b
Omnidirectional Condenser Microphone
Intended to be worn on the clothing of performers for excellent, yet
unobtrusive sound pickup. The wide-range capability of the AT803b
ensures clean, accurate reproduction with high intelligibility for
lecturers, singers, stage and TV performers.
◆ AA battery (up to 1200 hours) or 9 - 52v phantom power.
◆ 6’ cable is provided between the mic and power module.
◆ A built-in 3-position switch on the power module allows selection
of off, on/flat response, or on/low-roll-off.
◆ Includes clothing clip, windscreen and carrying case.
AT831b/AT831R
Cardioid Condenser Microphone
Cardioid versions of the AT803b, the miniature AT831b and AT831R
(phantom power only) are designed for hands-free applications in sound
reinforcement systems. Cardioid pattern provides improved gain before
feedback. Close-up voice pickup is crisp and clean, yet full sounding.
Suppression of background noise is significantly better than that of
full-size microphones. Same features and accessories as the AT803b.
MT830R
Subminiature Omnidirectional Condenser Mic
The MT830R’s wide-range capability ensures clean, accurate
reproduction with high intelligibility for lecturers, singers, stage, TV
performers and instruments. Runs on 9-52v phantom power only.
◆ 25’ cable is provided between the mic and power module.
◆ Includes clothing clip and windscreen.
www.bhphotovideo.com
Pro 70 Cardioid Condenser
Lavalier Microphone
This miniature condenser microphone achieves full-sounding
pickup and is known for outstanding consistency and
dependable performance. Supplied with a clothing clip, it
provides natural and articulate vocal reproduction
when used as a clip-on
lavalier. The Pro 70 is
designed to make
speech clearly and
comfortably audible, yet
never draw attention to
itself or its operation.
The versatile Pro 70 can
be powered by battery
or phantom power. Its
cardioid polar pattern
reduces pickup of sounds from the sides and rear, improving isolation of
the desired sound source. Low-frequency roll-off switch allows for reduced
pickup of room noise.
◆ Miniature condenser microphone ideal for
vocal applications
◆ Corrosion-resistant contacts from gold-plated XLRM-type connector
◆ 6’ cable is permanently attached between the microphone and the
power module.
Pro 70 Cardioid Lavalier Microphone (Mfr # PRO70 • B&H # AUPRO70) ............99.95
WIRED MICROPHONES
AU DI O T E C H NI C A
633
LAVALIER MICS
AT898 Subminiature Cardioid Lavalier Mic
Designed to be worn as a lavalier or hidden in loose clothing, the discreet-design cardioid
AT898 offers maximum intelligibility, accurate voice reproduction and unobtrusive
appearance for use by lecturers, stage and television talent, and worship leaders. Its
switchable low-frequency roll-off reduces sensitivity to popping. Battery or phantom power.
◆ Maximum intelligibility and clean, accurate
◆ Switchable low-frequency roll-off reduces
reproduction for lecturers, stage and
television talent, and houses of worship
sensitivity to popping in close vocal use
◆ Low-profile design (a mere 5mm in
diameter) is ideal for applications requiring
minimum visibility
◆ 9.8’ cable attached to mic, TA3F connector at
power module
◆ Operates on battery or phantom power
AT898 Lavalier Mic: With 9.8’ cable, TA3F connector at power module.
(Mfr # AT898 • B&H #AUAT898) ................................................................................227.50
AT898c Lavalier Mic:
Same as the AT898, less power module. Unterminated 55” cable.
(Mfr # AT898C • B&H #AUAT898C) ..............................................................................139.95
AT898cL4 Lavalier Mic:
Same as the AT898, less power module. 55” cable terminated with Lemo
connector for Sennheiser SK wireless systems.
(Mfr # AT898CL4 • B&H #AUAT898CL4) ......................................................................193.50
◆ Accessories include power module, clothing
clip, viper clip, magnet clip and lanyard, two
windscreens, three single and two double
mic holders, battery and carrying case
AT898cT4 Lavalier Mic: No power module. 55” cable terminated with
TA4F connector for Shure wireless systems.
(Mfr # AT898CT4 • B&H #AUAT898CT4) ......................................................................154.50
AT898cT5 Lavalier Mic: No power module. 55” cable terminated with
TA5F connector for ATW-U101 body-pack wireless system.
(Mfr # AT898CT5 • B&H #AUAT898CT5) ......................................................................154.50
AT898cW Lavalier Mic: No power module. 55” cable terminated with
locking 4-pin connector for UniPak wireless systems.
(Mfr # AT898CT5 • B&H #AUAT898CW).......................................................................154.50
AT899
Subminiature Omnidirectional Lavalier Mic
Designed for high-quality, unobtrusive operation, the AT899 provides maximum
intelligibility and clean, accurate reproduction for vocalists, lecturers, stage and
television talent, and houses of worship. A mere 5mm in diameter, the AT899 is
ideal for applications requiring minimum visibility. The omni element is enclosed
in a rugged, low-profile housing to minimize handling and wind noise.
◆
Supplied accessory kit includes single and double mounts, clothing clip, viper clip, magnetic clip, two open-pore foam windscreens, and two metal
mesh element covers and a convenient carrying case.
AT899 Lavalier Mic:
With a permanently attached 9.8’ cable and a 3-pin TA3F connection to
the supplied AT8537 battery/phantom power module.
(Mfr #AT899 • B&H # AUAT899)...................................................................................199.95
AT899cT4 Lavalier Mic: No power module. Unterminated 55” cable
with TA4F connector for Shure wireless systems
(Mfr #AT899CT4 • B&H # AUAT899CT4) ......................................................................154.50
AT899cT5 Lavalier Mic: Same as the AT898, less power module.
Unterminated 55” cable with TA5F connector for ATW-U101 body-pack
wireless system. Black finish (Mfr #AT899CT5 • B&H # AUAT899CT5) ............139.95
AT899c Lavalier Mic:
Same as the AT898, less power module. Unterminated 55” cable for
custom applications. Available in Black (Mfr #AT899C ;B&H #AUAT899C) and
beige “theater” color (Mfr #AT899CTH • B&H # AUAT899CTH) ...........................139.95
AT899cT5-TH Lavalier Mic Same as AT899cT5 but in beige
“theater” color (Mfr #AT899CT5-TH • B&H # AUAT899CT5TH) .............................154.50
AT899cL4 Lavalier Mic:
Same as the AT898, less power module. Unterminated 55” cable with
Lemo connector for Sennheiser SK wireless systems. Available in Black
(B&H #AUAT899CL4) and beige “theater” color (B&H # AUAT899CL4TH) ........193.50
AT899cW Lavalier Mic: Same as the AT898, less power module.
Unterminated 55” cable with locking 4-pin connector for A-T UniPak
wireless systems. Available in Black (AUAT899CW) and beige “theater” color
(Mfr # AT899CW-TH • B&H # AUAT899CWTH) .............................................................159.95
(212) 444-6601 • 1-800-947-9901 • Quick Dial 91
634
WIRED MICROPHONES
C OU NT RYM AN
B3
Broadway Series Lavalier Microphone
The B3 is a very small, round, omnidirectional electret microphone specially-equipped
to withstand moisture and makeup when placed in the hair or on the body. It will even
survive an overnight bath in your favorite cola beverage. Extremely small, the B3 looks
great when you want to see it, hides easily when you don’t. Hide it
in hair of actors, news anchors and lecturers. Ideal for use in
churches, schools and general lavalier applications, the B3 features
up to150dB SPL on 48v phantom power, has field-selectable
high-frequency response, and with Kevlar reinforced cable and an ultra thin diaphragm, sets a new
standard for low handling noise. Available in five colors (Black, White, Light Beige, Cocoa, Gray).
◆ Excellent choice for hair miking in theater
work. Features include moisture resistance,
small size, and flat frequency response.
◆ The protective cap on the B3 is easily
removed for cleaning or replacement when
clogged with makeup.
◆ Includes tie clip, wind screen, belt clip for
connector and two high-frequency response
control protective caps.
OPT I ONAL AC C E SSOR I E S FOR T H E B3 AND B6:
Single Tie Clip .............................................9.95
Double Tie Clip ........................................16.50
Magnetic Clip ...........................................12.95
Viper Clip ......................................................9.95
Windscreen...................................................5.95
Protective Cap .............................................7.50
B6 Incredibly Tiny Lavalier Microphone
Only one tenth of an inch (2.5mm) in diameter, the B6 is smaller than the cable of
other lavalier microphones, yet out performs microphones many times it’s size. The
B6 is effectively hidden when it’s in plain sight. For example choose a protective cap
near the color of a shirt and poke the B6 out through a button hole. Tape the cable to
the back of the shirt to secure it and your done. Say goodbye to the hassle and
degraded sound quality you get burying mics under clothing! Hide it in hair or glue
on the faces of actors, news anchors and lecturers. It is designed to survive.
Highly resistant to moisture, makeup and other hazards found in a production
environment, the B6 will even survive an overnight soak in your favorite cola
beverage. The outer screen in the B6’s replaceable cap stops makeup and sweat
before it enters the mike element. If it clogs, simply remove the cap for cleaning or replacement. The B6 includes a tie clip,
wind screen, belt clip for connector and a set of three high frequency protective caps so you can match your application.
B3
B6
www.bhphotovideo.com
WIRED MICROPHONES
C OU NT RYM AN
635
EMW
Square Omnidirectional
Lavalier Microphone
The Countryman EMW is a multi-purpose lavalier microphone designed for churches,
schools, interviews, news etc. It features an
omni-directional polar pattern, yielding an
even frequency and signal response at the
direct and indirect sections of the microphone.
It features a wide 20Hz to 20kHz frequency
response, and is also available in flat
(instrument miking, shelved (normal lavalier
use) and peaked (for use behind clothing)
frequency response curves. It is highly water resistant and is available in five colors
(Black, White, Light Beige, Cocoa, Gray). It includes a viper grip clip, a tie clip, a
wind screen and a soft case.
M I C R O P H O N E S F O R W I R E L E SS
Manufacturer
AKG
Audio-Technica
Mic System
Connector Type
PT40, 60, 61, 80, 8, 2000, 4000
Switchcraft TA3F
PT51, 300, 900
B-LOC (3.5mm)
B3 Omni Lav Mic
B6 Omni Lav Mic
EMW
B3W[ ]FF05[ ]AK
B6W[ ]FF05[ ]AK
MEMW[ ]05[ ]AK
B3W[ ]FF05[ ]AG
B6W[ ]FF05[ ]AG
MEMW[ ]05[ ]AG
T27, 31, 51, 210 ,310, 3000
Hirose 4-pin
B3W[ ]FF05[ ]AP
B6W[ ]FF05[ ]AP
MEMW[ ]05[ ]AT
T35, 75, 211, 601, 1000
Hirose 4-pin
B3W[ ]FF05[ ]AW
B6W[ ]FF05[ ]AW
MEMW[ ]05[ ]AN
Azden
41BT (UHF)
Hirose 4-pin
B3W[ ]FF05[ ]ZU
B6W[ ]FF05[ ]ZU
MEMW[ ]05[ ]ZU
Beyer
TS170, 170p, 190
Lemo “S” 4pin
B3W[ ]FF05[ ]BS
B6W[ ]FF05[ ]BS
MEMW[ ]05[ ]BS
Lectrosonics
M170, 175
Switchcraft 851
B3W[ ]FF05[ ]L2
B6W[ ]FF05[ ]L2
MEMW[ ]05[ ]L2
U100, 190, 195, 200, 300, M185
Switchcraft TA5F
B3W[ ]FF05[ ]LS
B6W[ ]FF05[ ]LS
MEMW[ ]05[ ]LS
M187, UM190, 195, 200, 250, 300
Switchcraft TA5F
B3W[ ]FF05[ ]LX
B6W[ ]FF05[ ]LX
MEMW[ ]05[ ]LS
Lemo 4-pin
B3W4FF05[ ]NL
B6W4FF05[ ]NL
MEMWF05[ ]NL
Switchcraft TA3F
B3W4FF05[ ]NS
B6W4FF05[ ]NS
MEMWF05[ ]NS
UT5, TX3 (Black)
Hirose 6-pin
B3W[ ]FF05[ ]SA (X)
B6W[ ]FF05[ ]SA (X)
MEMW[ ]05[ ]SX
CT3, VT2L
Switchcraft TA3F
B3W[ ]FF05[ ]SV
B6W[ ]FF05[ ]SV
MEMW[ ]05[ ]SV
Nady
Samson
Sennheiser
SK2012
Microdot
B3W[ ]FF05[ ]SE
B6W[ ]FF05[ ]SE
MEMW[ ]05[ ]SE
SK-50, SK250
Lemo 3-pin
B3W[ ]FF05[ ]S3
B6W[ ]FF05[ ]S3
MEMW[ ]05[ ]S3
BF1083
Lemo 1-pin
B3W[ ]FF05[ ]S1
B6W[ ]FF05[ ]S1
MEMW[ ]05[ ]S1
SK 1093 digital
3.5mm locking plug
B3W[ ]FF05[ ]SD
B6W[ ]FF05[ ]SD
MEMW[ ]05[ ]SD
Evolution Series EW100, 300, 500
3.5mm locking plug
B3W[ ]FF05[ ]SR
B6W[ ]FF05[ ]SR
MEMW[ ]05[ ]SR
Shure
L-1, L-11, LX1, SC1, U1, T1
Switchcraft TA4F
B3W[ ]FF05[ ]SL
B6W[ ]FF05[ ]SL
MEMW[ ]05[ ]SL
U1L
Lemo 4-pin
B3W[ ]FF05[ ]SU
B6W[ ]FF05[ ]SU
MEMW[ ]05[ ]SU
Sony
WRT-28, 420, 820
Twist-lock type 4-pin
EB3W[ ]FF05[ ]SO
B6W[ ]FF05[ ]SO
MEMW[ ]05[ ]SO
WRT822, WRT8B
Twist lock type 4 pin
B3W[ ]FF05[ ]SY
B6W[ ]FF05[ ]SY
MEMW[ ]05[ ]SY
WRT-805, URX-B1
3.5mm locking plug
B3W[ ]FF05[ ]SN
B6W[ ]FF05[ ]SN
MEMW[ ]05[ ]SN
If your wireless system is not listed here, give us a call or check our website for additional models (many more are available). When ordering, please specify desired color and microphone sensitivity.
(212) 444-6601 • 1-800-947-9901 • Quick Dial 91
636
WIRED MICROPHONES
DPA
4080
Miniature Cardioid Lavalier Microphone
Combining optimum speech intelligibility with a discreet, compact design, the DPA 4080 is well
suited for broadcast, conference, and other live performances in the studio or in the field. The
frequency response of the DPA 4080 lavalier is tailored to body-worn applications. It is acoustically
pre-equalized, offering a 4 dB presence boost, which makes the voice more distinguishable and
improves speech intelligibility. Just 1.2” long and 0.5oz., the 4080 sets a new standard for great
sound in a sleek design. Because of the flexible and practical mounting solution, the microphone
can easily be turned in all directions and fits both left and right buttoned shirts. The 4080 is
delivered with a pre-mounted pop filter in a holder with an integrated shock mount, fixed
on a clip. Because of the flexible and practical mounting solution, the microphone can
easily be turned in all directions and fits both left and right buttoned shirts.
4080: Cardioid Lavalier Microphone (Mfr # 4080-BM • B&H # DP4080BM) .....................................................529.95
4071
Miniature Omnidirectional Lavalier Microphone
The 4071 features a specially designed, fixed microphone grid with a soft presence boost of 5dB at
4-6kHz. Speech intelligibility, clarity and definition of voices lie within the area that the 4071 grid boosts.
While clarity seems to be missing from chest-worn mic placement, the 4071 will make voices cut
through. Typical applications are ENG/EFP use on the reporter in studio or in the field, or film production
use, with hidden mic placements on the actors. When recording voices from mic placement on a
performers body, no frequency below 100Hz is attractive. For this reason, an acoustical low-cut has
been incorporated in the 4071 capsule so the built-in pre amp will have much larger headroom.
4071-BM: In Black
4071-WM: In White
4071-FM: In Beige
(Mfr# 4071-BM • B&H# DP4071BM)........................459.95
(Mfr # 4071-WM • B&H # DP4071WM)....................459.95
(Mfr # 4071-FM • B&H # DP4071FM) ......................459.95
EMK4071 ENG/EFP Microphone Kit
FKM4071 Film Microphone Kit
This ENG/EFP microphone kit is
for use when the microphone is
allowed to be visible. The kit
contains a 4071-BM miniature
microphone (pre-equalized for
speech clarity) and various fixtures
for the microphone. Included is
also an XLR adaptor with midrange
attenuation (DAD6024), which is
the final tonal adjustment needed
for going directly on air or to tape
without editing. A combination of
4071 and DAD6024 makes voices
more distinguishable and improves speech intelligibility and definition.
Includes: Miniature Mesh for 4071 (DUA0572); Grey Fur Windjammer for
4071 (DUA0571); 8x Windscreens, Assorted Colors (DUA0570); Double
Lock (Black) Miniature Clip (DMM0008); Miniature Double Pin (Black)
(DMM0002-B); and Storage Case.
This microphone kit is made
for film or TV production when
the mic needs to be invisible.
The kit contains a 4071-BM
miniature mic (pre-equalized
for speech clarity) and various
microphone concealment
fixtures, specially designed to
solve both hiding and clothing
noise problems. The kit is
delivered in a sturdy, hard case
with a transparent lid leaving
room for the specific connection
adapter to close to any professional wireless system.
Includes: Miniature Windjammer; Miniature Mesh Pop Filter;
Miniature Double Pin (Black); Miniature Concealer; 10x Double-Sided
Mic Tape; 10x Miniature Mic Tape; Storage Case
DAK4071-E (Mfr # DAK4071-E • B&H # DPDAK4071E): ENG/EFP Application
Accessory Kit for Miniature Microphones..................................................171.95
FMK4071 (Mfr# FMK4071 • B&H# DPFMK4071)
Film Microphone Kit..................................................................................508.95
www.bhphotovideo.com
WIRED MICROPHONES
SANK E N
637
COS-11x
Next-Generation Ultra-Miniature
Lavalier Microphone
The successor to the popular COS-11s—the industry standard in ultraminiature lavalier microphones, the COS-11x is designed to meet today’s HD
audio standards while satisfying the concealment requirements of film, video
and theater. The COS-11x features a new front mesh screen which is water
resistant, better protecting the mic from perspiration and cosmetics. As a
result, the COS-11x maintains superb frequency response in adverse recording
conditions. In addition, the COS-11x is also water resistant making it ideal for
outdoor shooting in foul weather.
◆ Sanken utilizes an original vertical placement of the diaphragm for a
much greater effective area within an extremely small casing. Sanken’s
unique, innovative designs have been emulated by other microphone
manufacturers, but never matched in quality and performance.
◆
◆
Using the unique “Vertical Diaphragm Layout” which provides superb
sound from a microphone so small it is almost invisible, the COS-11x
has perfect omni- directional polar patterns from 20Hz to 20kHz, and
very natural sound from 50Hz to 20kHz. The frequency response is
consciously adjusted to the human voice.
Ideal for musical theater, TV news studio, ENG, TV/movie outdoor
shooting and even live opera and pop recording.
◆
Available in three versions (and four colors each):
COS-11x (48v phantom-powered), COS-11xBP (battery powered) and
COS-11xPT (pigtails, with no connector drivable from 3v to 10v DC.).
◆
A special pigtail version (COS-11xPT-RM) is also available with a “RED
MARK” which is designed for close microphone setting and for loud
voice, up to 136dB SPL.
◆
Soft and pliable cabling and clamp design assures long-term durability
when the microphone is a pulled through clothing or hair.
◆
Each mic comes a horizontal clip, windscreen and rubber mount.
A wide range of accessories allows easy positioning. There are also 11
colored windscreens to fit with any dress, jacket and hair.
COS-11x: With Pigtails in Black (Mfr # Mfr # COS-11XPT-BK • B&H # SACOS11XPTBKB)..............................................................................................................................................314.00
COS-11x: Phantom-powered only with TAF-5 connector in Black (Mfr # COS11XTA5BK • B&H # SACOS11XTA5B) .......................................................................................324.95
COS-11x: Battery-powered with 3-pin XLR connector in Black (Mfr # COS-11XBP • B&H # SACOS11XBPB) ....................................................................................................399.00
COS-22
Dual Capsule Lavalier Mic
Designed to meet the highest audio standards while satisfying the concealment requirements
of film and video, the ultra-miniature COS-22 is only 1.25” but boasts a truly unique concept:
dual high performance omni-mics in a tiny package. Utilizing the world’s most advanced
precision craftsmanship for the ultimate in sensitivity, natural sound and hidden capabilities,
the two-channel, dual omni-directional COS-22 is designed for high quality unobtrusive area
miking, stereo recording of music and environmental ambience, redundant capsule live broadcast (e.g. news anchors), and boundary-style miking for film and television. In addition, the COS-22 can be used as a noise cancellation
directional microphone pair by reversing the phase of one channel before summing the two outputs.
◆
◆
Complete redundancy from capsule to
connections.
High output and low noise with extremely
smooth omnidirectional pattern control
over a wide frequency range.
◆
◆
Poly-phenylene-sulfide diaphragm provides
dramatically higher humidity & temperature
stability, than other condenser lavaliers.
Vertical diaphragm placement protects
against moisture.
◆ Built-in 3-layer windscreen minimizes pops,
sibilance and wind noise.
◆ Holder clip provides critical distance
between microphone and clothing for
avoidance of mechanical/surface noise.
COS-22: Double Capsule Omnidirectional Lavalier Mic in Gray with HC-22 holder clip. (Mfr # COS-22 • B&H # SACOS22) ...............................................................649.00
(212) 444-6601 • 1-800-947-9901 • Quick Dial 91
638
WIRED MICROPHONES
SE NNH E I SE R
K6 SYSTEM
Modular Electret Condenser Microphone System
The K6 Series is a modular condenser microphone system
of exceptionally high quality. Available with a wide
variety of interchangeable modules for different polar
patterns, and capsule sizes, the K6 System provides a
flexible tool for all sound reinforcement work.
The modular design of the K6 power supply allows you
to use different lavalier capsules for on air talent and live theater applications.
Omni-Directional Lavalier Capsules
K6/K6P
Powering Modules
At the heart of the K6 series is the K6 power
supply. The K6 is the backend of the multimike system and accommodates a balanced,
low impedance 3-pin XLR output connector.
The K6 Module supplies power to any capsule
in the series. It can run for 150 hours on a
single AA battery, or can be used with 12 to
48v phantom power (AA battery doesn’t drain
while phantom-powering). The K6 features an
on/off switch with LED battery status
indicator; and a bass roll-off switch which
will compensate for proximity effect in close
miking, or for wind rumble in field recording.
The K6P phantom powering module provides
an alternative to the K6 that is 42mm shorter
and 15 grams lighter, while offering the same
integrated bass roll-off switch. Ideal for fixed
installations and applications where size is a
factor and phantom power availability is not
a concern.
K6 System
MKE2-60 Gold
The industry-standard for TV and theatrical production, the MKE2-60
sub-miniature omni lavalier is unobtrusive and easy to conceal. Its
accurate frequency response reproduces natural, uncolored sound.
An extremely thin low mass diaphragm exhibits extraordinary transient
response. The stranded, stainless-steel reinforced cable provides
maximum tensile strength and low contact (clothing) noise. May also
be used as a clip-on instrument mic.
MKE102-60
Similar in size to the MKE2-60 with several significant differences. The capsule
head can easily be detached for use with straight or right angle cables.
Highly immune to moisture, it is a natural for theater or outdoor productions.
Frequency response is optimized for speech pickup with its 4 to 6 dB rise at
8kHz. Extremely low self-noise makes it ideal for broadcast as well.
MKE104-60
The MKE104-60 is the same as the MKE102-60 except it is a cardioid mic,
which makes it ideal for applications that require isolation of the source.
Use in live musical performances and for reporting when there are several
announcers covering a scene with different audio feeds.
(lavaliers for K6 do not include MZQ222 clip and MZW2 windscreen)
K6 (SEK6): Powering module (powered by AA
MKE104-60 (SEMKE10460): Cardioid lavalier
MKE2-60/K6 (SEMKE260K6): Omnidirectional
battery or phantom power). On/off switch
with LED indicator and bass rolloff................Call
for K6 with right-angle cable. Includes a mic
capsule, windscreen, right-angle cable to
lavalier with K6 collar and a tie clip ........304.95
lavalier system with K6 power supply. Includes
a black microphone, a K6 powering module, a
dual-post tie clip and a carrying case ....485.95
MKE102S-60 (SEMKE102S60): Omnidirectional
lavalier system. Includes a black microphone
capsule, a windscreen, a straight cable with K6
collar and a tie clip ........................................289.95
MKE102S/K6 (SEMKE102SK6): Omnidirectional
MKE104S-60 (SEMKE104S60): Cardioid lavalier
system. Includes a black microphone capsule,
a windscreen, a straight cable with K6 collar
and a tie clip ....................................................289.95
MKE104S/K6 (SEMKE104SK6): Cardioid lavalier
K6P (SEK6P): K6 with phantom power only. No
on/off switch....................................................259.50
MKE2-60 Gold (SEMKE260): Omnidirectional
reduced sensitivity lavalier for K6, black with
integrated K6 collar.......................................289.95
MKE102-60 (SEMKE10260): Omnidirectional
lavalier for K6 with right-angle cable.
Includes a microphone capsule, windscreen,
right-angle cable and black tie clip.........304.95
www.bhphotovideo.com
lavalier system with K6. Includes a black
microphone capsule, a straight cable with K6
collar, a tie clip, K6 and carrying case.....565.50
system with K6. Includes a black microphone
capsule, a straight cable with K6 collar, a tie
clip, K6 and a carrying case........................512.95
WIRED MICROPHONES
SE NNH E I SE R
639
Accessories for Lavalier Mics
Windscreens for MKE2
Foam Windscreen
(Mfr # MZW2-F • B&H # SEMZW2F) ..............................5.00
Steel Mesh Grill and Windscreen
Black (Mfr # MZW2-A • B&H # SEMZW2A) .................9.95
Nickel (Mfr # MZW2-G • B&H # SEMZW2G) ............16.50
MZW2-G
Nickel Mesh Grill
MZW2-F
Foam Windscreen
TB-US
Lavalier Tie Clip
ZH100
Pin Clip
MZQ222
Dual Post Tie Clip
Pin Clips for MKE102/104
A pin-style, lavalier clothing clip.
Black (Mfr # ZH100-ANT • B&H # SEZH100B) ............12.50
Grey (Mfr # ZH100-GR • B&H # SEZH100G)...............12.50
NB2
Adjustable
Headset Boom
MZW2-A
Black Mesh Grill
MZW102N
Nickel Mesh Grill
Clips for
Right Angle KA Cables
Black (Mfr # MZQ100-ANT • B&H # SEMZQ100B),
Beige (Mfr # MZQ100-BEI • B&H # SEMZQ100BE) and
Grey (Mfr # MZQ100-GR • B&H # SEMZQ100G) ...........6.95
Tie Clips
Single Bar Lavalier Tie Clip
For the ME102 and ME104.
(Mfr # TB-US • B&H # SETBUS) ......................................5.50
Dual Post Tie Clips
For MKE2/102/104. Available in
Black (Mfr # MZQ222 • B&H # SEMZQ222) and Nickel
(Mfr # MZQ222-NI • B&H # SEMZQ222NI) .................19.95
Double Tie Clip
For MKE2 (Mfr # MZQ22-A • B&H # SEMZQ22A) ....24.95
Magnetic Mount Set for the MKE 2
Lets you wear the wireless MKE 2 on T-shirts,
sweaters, dresses, and other garments without
piercing the cloth. The set has an inconspicuous white finish. (Mfr# MZM10/2 • B&H# SEMZM102)
Adjustable Headset Boom
A unique, flexible, adjustable headset that allows you to adapt any Sennheiser lavalier for use as
a headworn mic. The unobtrusive, comfortable and rugged design fits any head. Available in
Black (Mfr # NB2 • B&H # SENB2) or Beige (Mfr # NB2-BEI • B&H # SENB2BEI) ..........................................................59.95
Accessory Kit for MKE-2
This accessory kit includes a nickel and black dual post tie clip, a nickel and black windscreen, a
black and grey pin clip, and a carrying case (Mfr # MZ2 • B&H # SEMZ2) ....................................................39.95
MKE-102/104 Accessory Kit
This accessory kit includes a nickel and black dual post tie clip, a nickel and black windscreen, a
black and grey pin clip, and a carrying case. (Mfr # MZ100 • B&H # SEMZ100) .............................................64.95
Lavalier Accessory Kits
Lavalier Accessory Backup Kits
Only available at B&H, this Lavalier Accessory Backup Kit provides
3 spare windscreens and lavalier clip. Lavalier users know all to
well how easily accessories are lost or broken during production,
the kit provides a suitable backup in one low cost package.
To fit small lavalier mics measuring 1/8” (3mm) in diameter. (B&H # BHCSLBUKS) .......................13.45
To fit medium-size lavalier mics measuring 1/4” (6 mm) in diameter. (B&H # BHCSLBUKM) .....13.45
Steel Mesh Grills
To fit large lavalier mics measuring 3/8” (9.5mm) in diameter. (B&H # BHCSLBUKL)....................13.45
Steel Mesh Grills for MKE-2
Provides adequate protection from shock
and minimizes noise due to wind and
proximity effect.
Deluxe Lavalier Accessory Kits
Black (Mfr# MZW2-A • B&H# SEMZW2A) and
Nickel (Mfr# MZW2-G • B&H# SEMZW2G) finish ..16.50
Steel Mesh Grille for MKE-102
Black (Mfr # MZW102-ANT • B&H # SEMZW102B) and
Nickel (Mfr # MZW102-NI • B&H # SEMZW102N) .....16.50
Steel Mesh Grille for MKE-104
Black (Mfr # MZW104-ANT • B&H # SEMZW104B) and
Nickel (Mfr # MZW104-NI • B&H # SEMZW104NI) ....43.95
Only available at B&H, the Deluxe Lavalier Accessory Kit is the
ideal solution for professional audio engineers in broadcast,
electronic news gathering (ENG) and electronic field production
(EFP). The kit delivers everything needed for successful results.
Backup Kit to fit small lavalier Deluxe Lavalier Accessory Kit for
small mics measuring 1/8” (3mm) in diameter.
For small-size lavalier mics measuring 1/8” (3 mm) in diameter. (B&H # BHDLAKS) ....................84.95
For medium-size lavalier mics measuring 1/4” (6 mm) in diameter. (B&H # BHDLAKM) .............84.95
To fit large lavalier mics measuring 3/8” (9.5mm) in diameter. (B&H # BHDLAKL) .......................84.95
(212) 444-6601 • 1-800-947-9901 • Quick Dial 91
640
WIRED MICROPHONES
R E MOT E AU DI O • RYC OT E
LAVALIER MIC ACCESSORIES
Remote Audio Micro-Cat Windscreen
The Remote-Audio Micro-Cat Windscreen is a
quality fuzzy outer layer wind diffuser plus two
additional inner layers of open weave fabric
made to fit snugly over lavaliere microphones.
The windscreen makes the lavalier microphone
suitable for outdoor recording ocations by protecting the capsule
against noise from sudden and unwanted wind gusts.
Micro-Cat
Lavaliere
Windscreen
White (Mfr # HAMCATW • B&H # REMCATW) ..............................25.00
Tan (Mfr # HAMCATT • B&H # REMCATT) .....................................25.00
Gray (Mfr # HAMCATG • B&H # REMCATG) ................................25.00
Black (Mfr # HAMCATB • B&H # REMCATB) ................................25.00
Rycote Lavalier Microphone Accessories
Windjammer
This Rycote windjammer is designed
for use with lavalier microphones
worn on the outside of clothing.
The furry windjammer includes
removable foam inserts that secure
the microphone and provide the air
space needed for true wind diffusion.
The windscreen that was included
with your Lavalier microphone can
be used as well. The windjammer is
guaranteed to be the optimum solution for high wind environments.
(Single) - Black (Mfr # 065514 • B&H # RYWFLB) ..................................................25.00
Undercover Pads
The Rycote Undercover pads are a disposable
mount and windshield used for mounting
lavalier microphones underneath clothing.
There are 3 sheets of 10 pads (30 pads total)
supplied in each package. The pads are
double coated with a peel-off adhesive and
a soft-woven material. The adhesive is peeled
onto clothing, providing a tacky mounting
surface for lavalier microphones. The woven
fabric disc is placed over the microphone and adhesive surface,
sandwiching the microphone and eliminating structure and rustling
noise caused by movement of clothing, cables, etc.
(Mfr# 065102 • B&H# RYUCG)......................................................................................12.95
(Pair) - Black & White - B&H Kit (B&H # RYWFLPBW) ....................................50.00
(Single) - White (Mfr # 065516 • B&H # RYWFLW) ................................................25.00
(Pair) - Gray (Mfr # 065502 • B&H # RYWFLPGK) ....................................................50.00
(Single) - Gray (Mfr # 065515 • B&H # RYWFLG) ...................................................25.00
(Pair) - White (Mfr # 065503 • B&H # RYWFLPW)...................................................50.00
Stickies
The Rycote Stickies are double sided adhesive
pads used for mounting lavalier microphones
to clothing and skin. The adhesive is standard
in the medical industry and offers a viable
alternative to clips and pin mounts.
The disposable pads are packaged in packs
of 30.
(Mfr # 065506 • B&H # RYS).........................................9.95
www.bhphotovideo.com
Overcover Pads
The Rycote Overcover pads are a disposable
mounting and windshield solution for
lavalier microphone use in gusty, outdoor
environments. There are 3 sheets of 10 pads
(30 pads total) supplied in each package.
The pads are double coated with a peel-off
adhesive and a soft-woven material.
The adhesive is peeled onto clothing,
providing a tacky mounting surface for
lavalier microphones. The supplied fur disc is capable of suppressing
noise caused by high wind gusts. The disc is placed over the microphone
and adhesive surface, sandwiching the microphone and eliminating
wind, structure and rustling noise.
(Mfr# 065505 • B&H# RYOC) .....................................................................................16.95
WIRED MICROPHONES
SH U R E
641
LAVALIER MICS
SM11
SM93
Omnidirectional Dynamic Lavalier Mic
Miniature Omnidirectional Lavalier Mic
The SM11 is a miniature dynamic lavalier microphone
designed for use in sound reinforcement and similar
uses where a small, professional-quality, microphone is
required. The SM11 has an omnidirectional pickup
pattern, and its frequency response is optimized for
lavalier use. The microphone is supplied with a tie clasp
assembly, tie tack assembly, connector belt clip, and
zippered carrying/storage bag.
◆ Frequency response optimized for lavalier use. Acoustically matches
most stand- or desk-mounted microphones.
◆ Small and lightweight for unobtrusive, virtually unseen operation.
◆ Smooth exterior and recessed grille screen minimize clothing noise.
The SM93 is an economical subminiature lavalier
condenser mic designed for use in speech
applications. Despite its small size, the SM93 mic
element provides full, clear sound comparable to
much larger mics. Its smooth frequency response
is specially tailored for chest-worn microphone
operation, while controlled low-frequency rolloff
reduces clothing and room noise. Runs on 11-52v
DC phantom power.
◆ Designed for wired applications, it includes a
preamp assembly with XLR connectors. The
preamp can be pocketed, strapped to the body,
or clipped to belt or waistband
◆ Supplied with small, inconspicuous mounting
◆ Extremely flexible long-life cable.
◆ Two mounting options–tie clasp or tie tack.
◆ Convenient, secure belt clip attaches connector to belt or clothing.
SM11 Lavalier Omnidirectional Dynamic Mic (SHSM11CN) .................99.95
MC50B
Subminiature Omnidirectional
Condenser Lavalier Microphone
A subminiature, electret condenser lavalier microphone,
the omnidirectional MC50B provides uncompromised
sound quality and high reliability with minimal visibility in
applications such as television broadcasting and stage
performances. Despite its small size, the microphone’s
condenser element provides full, clear and natural
reproduction of speech. The MC50 omnidirectional model
is supplied with two types of equalization caps for high
frequency response shaping. The mild boost equalization
cap attenuates the natural high frequency peak of the microphone. The
high boost cap does not attenuate the high frequency peak.
Supplied mounting accessories include lapel clip, a tie clip, a pin
mount, and a magnet mount, giving the user a wide variety of options
for placement. Also includes two foam windscreens to minimize
wind noise.
hardware. Includes a sew-on mounting bracket, a
mounting block with attached tie bar, and an
acoustic windscreen.
SM93 Omnidirectional Lavalier Mic (SHSM93) .......................................146.50
MX-183/184/185
Lavalier Microphones
Three wired lavalier microphones no larger
than a paper clip. Optional interchangeable
mic cartridges allows you to tailor the mics to
any audio environment. The mics attach to the
supplied power supply with the Shure Tini
Q-G connector. When the power supply is
removed, they can be used with any Shure
wireless transmitters.
◆ Interchangeable cartridges for omni-
directional, cardioid and super-cardioid
polar patterns.
◆ Black, snap-fit foam windscreen.
◆ Frequency Response 60 - 20 kHz.
◆ Includes both a pivoting single and dual microphone tie clip.
◆ Available with belt-clip phantom power only preamp and MX1BP
battery/phantom power preamp.
◆ Attached 4´ cable with Tini Q-G connector.
◆
Extended frequency response with user changeable equalization
caps for response shaping (omni only).
◆
Low visibility with a variety of options for mounting.
◆
Low handling noise.
MX184 Super-cardioid version of above. (Mfr #MX184 ;B&H #SHMX184) ..186.50
◆
Legendary Shure quality, ruggedness, and reliability.
MX185 (SHMX185): Cardioid version of above...........................................179.95
◆
Includes In-line preamplifier and 5’ cable with TA4F connector.
MX183BP (SHMX183BP): Omni-directional condenser lavalier
microphone with 4’ attached cable, MX1BP preamplifier ..................179.95
MC50B - Sub-Mini Omni-Directional Lavalier Microphone
with TA4F Connector for RPM626 Preamplifier (Black)
(Mfr# MC50B • B&H# SHMC50B) ...............................................................................289.95
MX183 Omni-directional condenser lavalier, belt-clip preamp, rotatable tie
clip, dual tie clip, snap-fit windscreen. (Mfr #MX183 ;B&H #SHMX183) ......167.50
MX184BP (SHMX184BP): Super-cardioid version of above....................194.95
MX185BP (SHMX185BP): Cardioid version of above.................................192.50
(212) 444-6601 • 1-800-947-9901 • Quick Dial 91
642
WIRED MICROPHONES
SONY
ECM-44 / 55 / 66 / 77 / 88
Electret Condenser Lavalier Microphones
Sony’s lavalier microphones are manufactured to meet the most demanding professional broadcast and recording
requirements. They are designed to deliver the highest level of performance and reliability. There are five primary lavalier
mics in the series, offering different sizes and applications. Additionally, they offer three big advantages over other systems.
High Performance: Sony’s lavalier microphones are distinguished by their superior
performance, as represented by the wide (20Hz~20kHz) frequency response of the top-of-the-line
ECM-88. They will more than measure up to your expectations.
Wide Selection: The ECM-88 is an extremely miniature, omni-directional
mic designed
for quality-critical applications in broadcasting, theater, and field productions. While slightly
bigger, the ECM-77B is also incredibly small and light. The uni-directional ECM-66B is designed for
close-miking of musical instruments. The popular ECM-55B incorporates a 10.6mm omni-directional
capsule for versatility, while the ECM-44B offers high performance at a lower cost.
Reliability and Convenience: Careful attention is paid to make the capsule
immune to external noise and adverse ambient conditions. The cable is strengthened to achieve
a high resistance to damage caused by over flexing.
ECM-44B Omni-directional Electret Condenser Mic (SOECM44B)
Delivering clean, bright, yet natural reproduction, the ECM-44B makes Sony’s exceptional condenser
mics available for budget conscious productions, and a variety of sound reinforcement requirements,
such as lectures and demonstrations. With in-line battery for powering via 48v phantom power or a
single AA battery (for over 5000 hours). Supplied with urethane windscreen and clip......................194.95
ECM44BC (SOECM44BC)
With a Sony SMC9-4P 4-pin
connector .............................99.95
ECM44BMP (SOECM44BMP)
With a 3-pole mini jack and
stable lock mechanism .109.95
ECM44BPT (SOECM44BPT)
With an unterminated cable for
custom installations.......108.95
ECM-55B (SOECM55B)
Omni-directional Electret Condenser Mic
The ECM-55B is suitable for news, interviews and stage dramas. Frequency response is a wide 30Hz
to 18 kHz. Directivity is optimized to ensure uniform, dependable output, regardless of the direction
of the sound source. The metal mesh windscreen effectively eliminates both wind noise outdoors
and pop noise in close-up situations. Complete with in-line battery for 2-way powering (battery or
48v phantom power). Supplied with metal windscreen and metal holder clips .................................CALL
Frequency Response
Dynamic Range
Signal-to-Noise Ratio
Max Input SPL
Battery Life
Output Impedance at 1kHz
ECM-44B
ECM-55B
ECM-66B
ECM-77B
ECM-88
40 - 15k Hz
30 - 18k Hz
70 - 14k Hz
40 - 20k Hz
20 - 20k Hz
≥90dB
98dB
≥101dB
≥90dB
≥99dB
≥62dB
66dB
≥62dB
≥64dB
≥68dB
122dB SPL
126dB SPL
130dB SPL
≥130dB SPL
125dB SPL
Approx. 5000 hrs.
Approx. 5000 hrs.
Approx. 300 hrs.
Approx. 5000 hrs.
250Ω
100Ω
100Ω
150Ω
www.bhphotovideo.com
100Ω
WIRED MICROPHONES
SONY
643
ECM-44 / 55 / 66 / 77 / 88
ECM-66B Uni-Directional Electret Condenser Mic (SOECM66B)
When superb rejection of ambient sound is desired, the ECM-66B yields clean, natural reproduction of
vocals or musical instruments while maintaining excellent isolation from the acoustic environment.
This miniature microphone has a uni-directional polar pattern, carefully contoured for better control
of feedback. The higher voltage supplied to the microphone by the built-in DC-to-DC converter
complements the electret condenser design, resulting in excellent transient response and thus better
tonal quality. Complete with in-line battery for 2-way powering (battery or 48v phantom power), and
a battery on/off switch to save power. An LED shows battery condition when the power is turned on.
ECM66B
(Mfr # ECM66B • B&H # SOECM66B)...................................................................................................................370.00
ECM-77B Omni-directional Condenser Microphone (SOECM77B)
Only 1/4” x 1/2” and a mere 0.04 oz., the microscopic ECM-77B offers increased mechanical impedance using a metal vaporized,
fine ceramic backplate to provide an exceptional 40Hz to 20kHz frequency response and to assure resistance to humidity and
temperature extremes. Combined with advanced techniques for sealing the capsule and acoustic housing, the ECM-77B delivers
sound that is audibly superior and more pleasing than other lavalier mics. Ideal for broadcasting and stage applications where
the mic must be inconspicuous, it enables unobtrusive miking plus also minimizes glare. Even when hidden inside a costume,
its frequency response is wide enough to pick up the voice with no perceptible change in quality, while minimizing the pick-up of rustling noise.
ECM77B
(SOECM77B):.........................................................385.00
ECM77BMP (SOECM77BMP): With a 3-pole mini
jack and stable lock mechanism..............248.95
ECM77BPT (SOECM77BPT): Supplied without a
connector (pigtail) ........................................242.95
ECM-88B Omni-directional Condenser Microphone (SOECM88B)
An extremely miniature, omni-directional electret-condenser microphone for quality-critical
applications in broadcasting, theater, and field productions. It’s dual-diaphragm mechanism achieves
high-sensitivity, flat-and-wide frequency response and low noise characteristics. The diaphragm and
back-plates are fixed vertically to the microphone capsule, reducing the mechanical noise caused by
cable vibration and friction. Water-resistant architecture reduces the risk of water or perspiration
entering the mic capsule. The mic capsule measures just 5/32 x 5/32 x 11/16” allowing for easy, natural-looking concealment in a stage costume.
The ECM-88B includes a horizontal clip, a vertical clip, a double clip, a urethane windscreen and a Sony 4-pin connector (SMC9-4P) for use with the
supplied DC-78 power-supply or with the optional WRT-8B/822B wireless bodypack transmitters.
ECM88 (Mfr # ECM88B • B&H # SOECM88B)
Includes the DC-78 power-supply.......... 495.95
ECM88PT
Supplied without a connector (pigtail).
Available in Black (SOECM88BPT) and Beige
(SOECM88FPT) .....................................334.95/279.95
DC Power Supply Unit (SODC78)
Designed for use with the ECM-88, the DC-78
is powered via an AA alkaline battery or an
external DC (12-48v) power supply. It has an
XLR output..........................................................84.95
ECM-88 Microphone
Accessory Kit (SOADKIT88B)
Includes two types of microphone holders
(double-pin and tie-clip), a holder adapter for
dual-microphone operation, plus six urethane
windscreens (red, yellow, green, blue, gray,
and black).........................................................148.95
Tie Clips and Windscreens for Sony Lavalier Mics
Misc. 6-packs of Clips for the ECM-88B
Vertical Lavalier (Single ) Tie Clips
Safety Mic Clips (SOSADS88B) ........................149.95
For ECM-77B (SOSADV77B): Set of 10 ..........147.95
Dual Holder Adapter (SOSADW88B) ...............74.95
For ECM-88 (SOSADV88B): Set of 10.............159.95
Horizontal/Vertical Tie Clip (SOSAD88B) ....134.95
Horizontal Lavalier (Single) Tie Clips
For the ECM-44B (SOSC44) ...............................16.95
For the ECM-44B (SOSADH44B): Set of 6.......99.95
For the ECM-55B (SOSADH55B): Set of 6.......99.95
For the ECM-77B (SOSC77) ...............................14.95
For the ECM-77B (SOSADH77B): Set of 6....139.95
For the ECM-88 (SOSADH88B): Set of 10.....159.95
Urethane Windscreens
Black for ECM-44 (SOWS44) ..............................11.95
Black for ECM-44 (SOADR44B): Set of 6 ........99.95
Black for ECM-66 (SOADR66B): Set of 6 ........99.95
Black for ECM-77 (SOWSU77S) ............................9.95
Black for ECM-77 (SOADC77B): Set of 12 ......99.95
Color for ECM88 (SOADC88): Set of 6 .........134.95
Black for ECM88 (SOADR88B): Set of 12......118.95
Horizontal Lavalier (Double) Tie Clips
Metal Mesh Windscreens
For ECM-77B 6-pack (SOSADW77B) ..............119.95
Black for ECM-77 (SOWSM77S) .........................19.95
For ECM-88 6-pack (SOSADW88BL)...............149.95
Black for ECM-77 (SOADR77B): Set of 6 ........94.95
(212) 444-6601 • 1-800-947-9901 • Quick Dial 91
644
WIRED MICROPHONES
T R AM
TR50
Miniature Professional Lavalier
Microphone
When it was introduced, the TR50 miniature microphone revolutionized
the industry—and since then it has become the standard in feature
films and television production. In addition to its diminutive size and
superior sound quality, the TR-50 offers a combination of features that
are simply not offered by any other microphone. The TR50 answers
the needs of even the most demanding sound recording engineer.
It is designed with the latest electret development and electronics
technology, to provide high sound quality with little or no visibility.
Its small size and unique design permit a variety of uses and fastening
options, that make it ideal for unobtrusive appearance and hidden mic use. The tiny omni-directional capsule features
minimum sound coloration and is therefore easily combined with boom mics during post production. A variety of
accessories makes mounting the mic on or under clothing easy, with reliable results.
F E AT U R E S
◆ Extended frequency response range and
omni-directional characteristics have been
designed to satisfy the most stringent
requirements in all professional audio fields,
particularly film and TV production.
◆ The omni-directional polar pattern provides
a generous pick up response at the direct
and off-axis sections of the microphone capsule. The result is enhanced sensitivity and
minimal noise associated with movement,
wind and clothing contact
◆ Minimum sound coloration for universal use
◆ Features a hardwired in-line power supply
that accepts +48V phantom power, and terminates with a 3-pin XLR male connector.
Can also be powered via 1.5v silver oxide
button battery (TR-BATT).
◆ Optional TR79 power supply allows direct
attachment to dozens of wireless mic transmitters (see wireless mic section).
TR50 Omni-Directional Lavalier Condenser
Microphone (available in four colors)
White (Mfr # TR50WPS • B&H # TRTR50WPS) ........314.95
Black (Mfr # TR50BPS • B&H # TRTR50BPS) ............314.95
Tan (Mfr # TR50TPS • B&H # TRTR50TPS)................. 314.95
Gray (Mfr # TR50GPS • B&H # TRTR50GPS)..............314.95
Each includes Cable Holder (CH), Clip On Holder (COH),
Tie Bar (TB), Tie Tack (TT), Windscreen (WS),
TR50 Accessories
Foam Windscreen: With plastic support,
slips on easily to blend in for low-profile
functionality. Available in Tan/Flesh (Mfr #
TWS • B&H # TRTWS), Gray (Mfr # GWS • B&H # TRGWS),
White (Mfr # WWS • B&H # TRWWS) ................13.95
Double Tie Bar:
Accommodate two TR50’s. Ideal for stereo
or secondary reference pick up.
(Mfr# BDTB • B&H# TRBDTB) ...............................16.95
Mic Cage 1: Accessory clip
with plain back positions
the TR50 underneath
clothing for optimum
recording results, while
remaining concealed.
(Mfr# MC1 • B&H# TRMC1) .................................17.95
Clip Mic Holder with Vampire Pins:
Available in Black (Mfr # BCOH • B&H # TRBCOH),
Gray (Mfr # GCOH • B&H # TRGCOH),
Tan/Flesh (Mfr # TCOH • B&H # TRTCOH),
White (Mfr # WCOH • B&H # TRWCOH) ...............9.50
Mic Cage 2:
Same as above, except with vampire pin
back (Mfr# MC2 • B&H# TRMC2) .......................21.95
Clip Tie Clip:
Available in Black
(Mfr# BTT • B&H# TRBTT), Tan/Flesh
(Mfr # TTT • B&H # TRTTT), White
(Mfr # WTT • B&H # TRWTT) ................7.50
Tie Bar with Alligator
Clip: Available in Black
(Mfr # BTB • B&H # TRBTB),
Gray (Mfr # GTB • B&H # TRGTB),
Tan/Flesh (Mfr # TTB • B&H # TRTTB),
White (Mfr # WTB • B&H # TRWTB) .....................7.50
Tape Down (TD) and Carrying Case.
www.bhphotovideo.com
Cable Holder with Vampire Pins:
Available in Black (Mfr # BCH • B&H # TRBCH),
Gray (Mfr # GCH • B&H # TRGCH),
Tan/Flesh (Mfr # TCH • B&H # TRTCH),
White (Mfr # WCH • B&H # TRWCH) ....................6.95
Cable Reel:
Eliminates the clutter of excess cable and
allows for neat storage.
Available in Black (Mfr# BCR • B&H# TRBCR),
Gray (Mfr # GCR • B&H # TRGCR),
Tan/Flesh (Mfr # TCR • B&H # TRTCR),
White (Mfr # WCR • B&H # TRWCR) .....................7.50
Boundry Tape Down Holder-Black
(Mfr# BBLTD • B&H# TRBBLTD)...............................9.95
WIRED MICROPHONES
VOI C E T E C H NOLO GI E S
645
VT500 • VT506
Miniature Lavalier Microphones
The VT500 has extremely smooth omni-directional pattern control over a wide
frequency range. It is designed for performing talent in broadcast, theater, film, public
address and sound reinforcement among other applications. Speech clarity is
enhanced by a slight frequency emphasis giving excellent voice reproduction while
eliminating placement constraints. Due to the unique design of the VT500, noise transmission from handling and clothing movement is kept at a minimum. An integral filter
provides efficient RF suppression. The cable is smooth, rugged, sweat proof and has
excellent isolation from rubbing noise.
Otherwise the same, the VT506 is slightly peaked above 8kHz providing brilliance and preserving sibilance which insures
enhanced intelligibility when the microphone is hidden under clothing. It is designed for performing talent in broadcast,
theatre, film, public address and sound reinforcement. An integral filter provides highly efficient RF suppression. The cable is
smooth, rugged, sweat proof and has excellent isolation from rubbing noise.
Unterminated (3-wire pigtail) version comes with waterproof VTO Box and four accessories (Alligator Clip, Pro Windscreen, Dracula Mount, Tie Tac
Clip) or as budget set with a silver metal box and 3 accessories (Alligator Clip, Standard Windscreen, Tie Tac Clip). Hardwired versions terminating
with XLR include special longer black box in place of VTO and four accessories (Alligator Clip, Pro Windscreen, Dracula Mount, Tie Tac Clip).
VT500 Black
VT500 and VT506 in White
Unterminated with NO accessories.
(Mfr # VT0011 • B&H # VOVT0011) ..........................165.00
VT500 (Mfr # VT0028 • B&H # VOVT0028), VT506 (Mfr # VT0052 • B&H # VOVT0052) unterminated with silver
box and three accessories ..............................................................................................................................200.00
Unterminated with silver box and three
accessories. (Mfr # VT0026 • B&H # VOVT0026) ..185.00
VT500 (Mfr # VT0021 • B&H # VOVT0021), VT506 (Mfr # VT0040 • B&H # VOVT0040) unterminated with VTO Box
and four accessories .........................................................................................................................................225.00
Unterminated with VTO Box and four
accessories. (Mfr # VT0010 • B&H # VOVT0010) ..210.00
VT500 (Mfr # VT0068 • B&H # VOVT0068), VT506 (Mfr # VT0070 • B&H # VOVT0070) hardwired (3-pin XLR) with
48v phantom power supply ..........................................................................................................................310.00
Hardwired (3-pin XLR) with 48v phantom
power supply.
(Mfr # VT0060 • B&H # VOVT0060) ..........................295.00
Hardwired (3-pin XLR) with 9-52v phantom
power supply or battery powered.
(Mfr # VT0061 • B&H # VOVT0061) ..........................319.00
VT500 (Mfr # VT0069 • B&H # VOVT0069), VT506 (Mfr # VT0071 • B&H # VOVT0071), hardwired (3-pin XLR) with
9-52v phantom power supply or battery powered ..............................................................................335.00
VT500 and VT506 Optional/Replacement Accessories
Alligator Clip Black (VOVT0200)...11.95, White (VOVT0255), Beige (VOVT0251) ...............................15.95
Dracula Mount Black (VOVT0201)..14.95, White (VOVT0256), Beige (VOVT0252) ............................19.95
Tie Tac Clip Black (B&H # VOVT0202) 9.95, White (B&H # VOVT0257), Beige (VOVT0253) ..................12.95
VT506 Black
Pro Windscreen Black (VOVT0205) 14.95, White (VOVT0258), Beige (VOVT0254) ............................17.95
Unterminated with NO accessories.
(Mfr # VT0034 • B&H # VOVT0034) ..........................165.00
Magnetic Cage Clip with Cord (VOVT0207) ..........................................................................................34.95
Rubber Body Mount (VOVT0259) ................8.95
Leather Body Mount ( VOVT0209) ..............11.95
Unterminated with silver box and three
accessories. (Mfr # VT0051 • B&H # VOVT0051) ..185.00
Unterminated with VTO Box and four
accessories. (Mfr # VT0033 • B&H # VOVT0033) ..210.00
Hardwired (3-pin XLR) with 48v phantom
power supply.
(Mfr # VT0062 • B&H # VOVT0062) ..........................295.00
Hardwired (3-pin XLR) with 9-52v phantom
power supply or battery powered.
(Mfr # VT0063 • B&H # VOVT0063) ..........................319.00
VT500 and VT506 in Beige
VT500 (Mfr # VT0027 • B&H # VOVT0027), VT506
(Mfr # VT0053 • B&H # VOVT0053) unterminated
with silver box and three accessories ..200.00
VT500 (Mfr # VT0016 • B&H # VOVT0016), VT506
(Mfr # VT0045 • B&H # VOVT0045) unterminated
with VTO Box and four accessories.......225.00
VT500 (Mfr # VT0064 • B&H # VOVT0064), VT506 (Mfr
# VT0066 • B&H # VOVT0066) hardwired (3-pin XLR)
with 48v phantom power supply ..........310.00
VT500 (Mfr # VT0065 • B&H # VOVT0065), VT506
(Mfr # VT0067• B&H # VOVT0067), hardwired (3-pin
XLR) with 9-52v phantom power supply or
battery powered ..........................................335.00
(212) 444-6601 • 1-800-947-9901 • Quick Dial 91
646
WIRED MICROPHONES
AU DI O T E C H NI C A
AT3031
Small-Diaphragm Cardioid Condenser Microphone
Studio-quality, low-profile cardioid condenser mic, the AT303 features a flat, extended
frequency response, high maximum SPL and wide dynamic range. Delivering outstanding
performance and versatility. Its low self-noise (16 dB SPL) is perfectly suited for the most
sophisticated recording equipment. Low-mass diaphragm improves transient response,
increases response bandwidth and reduces handling and mechanical noise transfer.
◆
High max SPL and wide dynamic range
◆
Lo-cut switch (80 Hz, 12 dB/octave) and
10 dB pad
◆
Cardioid polar pattern reduces pickup of
sounds from the sides and rear, improving
isolation of desired sound source.
◆
Low self-noise (16 dB SPL) makes it ideal for
today’s digital recording equipment.
AT4041 Small-Diaphragm Cardioid Condenser Microphone
The AT4041 is a pressure-gradient condenser microphone with a uniform cardioid
polar pattern that is ideal for professional recording and broadcast applications.
Very similar to the AT4051a except for interchangeable capsules. The AT4041 features
a transformerless output for low self-noise, high output and very high SPL handling
capability (up to 145dB). The balanced output is direct-coupled, resulting in a clean
signal even under high-output conditions.
◆
Integral high-pass filter provides easy switching from a flat frequency
response to a low-end roll-off. In addition to preventing the pickup
of low-frequency ambient noise (such as air-conditioning) the
high-pass filter may also be used to compensate for proximity
effect in close-miking situations.
◆
Use of the supplied foam windscreen further reduces wind and
“popping” noise. Ruggedly built, the AT4041 is housed in a turned
brass case, not thin-wall aluminum. The surface is painted black for
low reflectivity. Compatible with any remote “phantom” or “simplex”
power source supplying 48v DC.
AT3031 - Small Cardioid Studio Condenser Microphone (Mfr# AT3031 • B&H# AUAT3031) ...........................................................................................................................169.00
AT4041 - Small Diaphragm Cardioid Condenser Instrument Microphone (Mfr# AT4041 • B&H# AUAT4041) ..........................................................................................279.00
AT4051A • AT4053A
Small-Diaphragm Cardioid and Hypercardioid Condenser Microphones
The AT4051a and AT-4053a are transformerless phantom-powered condenser studio
microphones engineered for professional recording and broadcast. They offer smooth,
flat frequency response and a clean signal, even in high-output conditions. They also
feature exceptionally low self-noise, high output and fast transient response. But what
separates them from other mics, is that the head capsules may be easily removed,
stored and replaced with an cardioid or hypercardioid capsule to meet the needs of
the widest range of miking applications.
They handle very high sound pressure levels with ease. An integral 80Hz hi-pass filter provides
easy switching from a flat frequency response to a low-end roll-off. The hi-pass position reduces
mic sensitivity to “popping” in close vocal use and to handling noise. It also attenuates unwanted
low-frequency ambient noise. Use of the supplied foam windscreen helps reduce wind and
“popping” noise. Their housings are constructed of turned brass and plated in black chrome for
durability and low reflectivity. They operate on 48v DC phantom power. A compartmentalized
case accommodates the microphone, stand adapter, windscreen and two optional head capsules.
www.bhphotovideo.com
AT-4051A
AT-4053A
WIRED MICROPHONES
AU DI O T E C H NI C A
647
Small-Diaphragm Condenser MIcs
AT4051a • AT4053a
M O D U L A R E X PA N SI O N C A PA B I L I T Y
◆ They handle high sound pressure levels with
ease—up to 146 dB SPL while producing no
greater than 1% T.H.D.
AT-40 series microphones consist of two modular sub
assemblies which are threaded together:
the AT4900a-48 handle containing the mic’s electronics,
and either the AT4049a-EL (omnidirectional),
AT4051a-EL (cardioid) or the AT4053a-EL (hypercardioid)
condenser head capsules. The head capsules may be
easily removed, stored and replaced with an optional
cardioid or hypercardioid capsule to provide the widest
range of miking capability.
◆ Integral 80 Hz hi-pass filter provides easy
switching from a flat frequency response to
a low-end roll-off. The switch is recessed to
prevent accidental activation.
◆ Included foam windscreen helps reduce
wind and “popping” noise.
◆ Constructed of turned brass and plated in
black chrome for low reflectivity.
◆ Requires remote “phantom” or “simplex”
power source supplying 48 volts DC.
The AT4051a-EL capsule
provides the advantages of
a smooth, wide-response
cardioid pattern.
◆ DC biased condenser element design.
◆ Output impedance of 100 ohms and output
shall be transformerless balanced.
The AT4053a-EL hypercardioid element offers excellent
side rejection for increased working distance, and a
highly uniform polar pattern that virtually eliminates
off-axis coloration.
◆ Length of 6.10”
a diameter of 0.83” (21.0
mm), and a weight of 4.2 oz. (120g).
◆ A compartmentalized carrying case
accommodates the mic, stand adapter,
windscreen and two optional head capsules.
AT4051A (Mfr# AT4051A • B&H# AUAT4051A)
Cardioid Studio Condenser Capacitor
Microphone......................................................499.00
AT4053A (Mfr# AT4053A • B&H# AUAT4053A)
Hypercardioid Studio Condenser
Microphone......................................................499.00
NE UM ANN KM184 • KM185
The KM184 (cardioid) and KM185 (hypercardioid) are compact miniature microphones designed for small
budget studio applications. Their slender shape and the transmission characteristics make them ideal for a
wide range of applications in radio and television. Available in either matte black or nickel finish, the mics
come in a folding box with a windshield and two stand mounts that permit connection to the microphone
body, or the XLR-connector.
The pressure gradient transducers KM 184 and KM 185 feature very smooth frequency responses not only for the 0° axis, but also for
lateral (off-axis) sound incidence. In typical usage, there is no coloration of sound over a wide pickup angle. The KM 185 features
attenuation of sound incidence from the side or rear of about 10 dB, with minimum sensitivity at an angle of 120°. The KM 184 has a
gentle rise at about 9 kHz.
KM 184
KM 185
◆ For universal use, especially for recording situa-
◆ Especially for recording situations when it is necessary to attenuate off-axis
tions when it is necessary to attenuate off-axis
sound (mainly from the rear) from other nearby
instruments.
◆ As XY and ORTF stereo pair.
◆ Announcer’s mic for broadcasting.
◆ Spot mic, overhead.
sound (lateral and rear) from other nearby instruments.
◆ As XY stereo pair.
◆ In situations that are susceptible to acoustic feedback.
◆ Recording of speech, as in TV, movie and video productions, PA systems.
◆
Produces especially warm and bass supporting sound for artists who
perform in proximity effect range.
KM184NI: Cardioid Studio Condenser Miniature Microphone in Nickel finish (Mfr # KM 184 NI • B&H # NEKM184NI).........................................................................849.00
KM184MT: Cardioid Studio Condenser Miniature Microphone in Black finish (Mfr # KM 184 MT • B&H # NEKM184MT) .....................................................................849.00
KM185NI: Hyper-Cardioid Studio Condenser Miniature Microphone in Nickel finish (Mfr # KM 185 NI • B&H # NEKM185NI) ...........................................................899.00
KM184MT: Hyper-Cardioid Studio Condenser Miniature Microphone in Black finish (Mfr # KM 185 MT • B&H # NEKM185MT) .......................................................899.00
(212) 444-6601 • 1-800-947-9901 • Quick Dial 91
648
WIRED MICROPHONES
RODE
NT3
Hypercardioid Studio Condenser Microphone
The stylish NT3 is a studio and location workhorse. With both 48v phantom and internal 9v battery operation,
this mic is at home anywhere. Designed for studio, stage and location work, this versatile handheld or stand
mounted microphone incorporates a true externally polarized condenser (hyper-cardioid polar response)
transducer with an internal capsule shock mounting system, and an ultra-low noise electronic circuit that has
a high immunity to RF interference.
◆
True condenser externally biased
3/4” capsule
◆
Internal capsule shock mounting
◆
Battery status indicator
◆
High level of RF rejection
◆
◆
Dual power operation
◆
Audio-grade surface mount components
Cast metal body with
durable satin nickel finish
◆
Transformerless output
◆
Full frequency response
(Mfr# NT3 • B&H# RONT3) .... 269.00
NT5 Cardioid Studio Condenser Microphone
The NT5 is a cardioid condenser microphone offering a full frequency response and low-noise output
circuitry. Designed for general instrument recording and sound reinforcement. The cardioid polar
pattern effectively minimizes audio at the off-axis sections, reducing noise caused by leakage,
monitors, additional instruments etc. The NT5 offers a frequency response of 20Hz to 20kHz allowing
use in wide variety of applications. The NT5 is powered via +48, +24 volt phantom power. Available
in single or pairs, they include windscreens and stand mounts in a durable road case.
NT5 Single (Mfr# NT5-S • B&H# RONT5S).............................................................................................................................................................219.00
NT5 Pair (Mfr # NT5 • B&H # RONT5) ......................................................................................................................................................................429.00
SC H OE PS
Colette Series Microphone Set
The Colette Series system is popular among professional field audio engineers. The modular CMC6
preamplifier and MK41 super-cardioid capsule provide a professional alternative to shotgun microphones
when recording dialog indoors. The system is based on the modular CMC6 preamplifier and MK series
capsules which are capable of wide, linear frequency response curves and superior audio quality. The
system includes the CMC6 preamplifier, MK41 capsule, SG20 microphone mount, B5 pop-filter and case.
The CMC6 preamplifier features Class-A transformerless electronics, resulting in a very low noise floor
and light weight. The high impedance input signal of the modular capsules are accurately converted to
low-impedance energy, allowing for long cable runs without noise and radio frequency interference.
The MK41 capsule is a super-cardioid condenser capsule with a wide frequency range and high SPL
handling. The super-cardioid capsule is effective in minimizing noise and ambient audio at the off-axis
sections of the microphone capsule. The microphone system is more than suitable for crucial capturing
of dialog and ambiance for film, professional video and professional audio applications.
Colette Series Microphone Set: Includes
CMC6 Microphone Amplifier, MK41
Super-Cardioid Capsule, SG20 Microphone
Mount, B5 Pop-Filter and Case.
(Mfr # CMC641SET • B&H # SCCMC641S) ...............1939.00
Colette Series Microphone Set: Includes two
CMC6 Microphone Amplifiers, 2 MK41 SuperCardioid Capsules, two SG20 Microphone
Mounts, two B5 Pop-Filters and Case.
(Mfr # CMC41ST • B&H # SCCMC641ST) ................4073.00
www.bhphotovideo.com
Colette Series Microphone Set: Includes two
CMC6 Microphone Amplifiers, two MK4
Cardioid Capsules, two SG20 Microphone
Mounts, two B5 Pop-Filters and Case.
(Mfr # CMC64 ST • B&H # SCCMC64ST).................3625.00
WIRED MICROPHONES
649
SE NNH E I SE R
ME-62 • ME-64
Omni-Directional and Cardiod Capsules
The ME-62 is an omnidirectional microphone capsule used with the K6, or K6P powering
modules for reporting, discussions and interviews. The ME-62 is particularly suitable for
good reproduction of “room” ambience and “spaced omni” stereo recording. The ME-64
is a cardioid, shotgun, microphone capsule also used with the K6 and K6P powering
modules. It has a very wide range of applications including reporting, interviews,
dubbing, live sound reinforcement and recording applications. Both mics come in a
matte black, anodized, scratch resistant finish.
Capsules shown with
K6P powering module
ME-64
ME-62
The ME-62 and ME-64 are powered by the K6 or K6P powering modules. They can run for 150 hours on a single AA battery, or can be used with 12 to
48v phantom power (AA battery doesn’t drain while phantom-powering). The K6 features an on/off switch with LED battery status indicator; and a
bass roll-off switch which will compensate for proximity effect in close miking, or for wind rumble in field recording. The K6P phantom powering
(only) module provides an alternative to the K6 that is 42mm shorter and 15 grams lighter, while offering the same integrated bass roll-off switch.
Ideal for fixed installations and applications on camera or on stage where size is a factor and phantom power availability is not a concern.
ME-62 - Omni-Directional Capsule (Mfr# ME62 • B&H# SEME62) .................149.95
K6P Phantom Power Only Module (Mfr# K6P • B&H# SEK6P) ......................219.95
ME-64 - Cardioid Microphone Capsule (Mfr# ME64 • B&H# SEME64) .........179.50
K6 Battery/Phantom Powering Module (Mfr# K6 • B&H# SEK6) .................219.95
MKH-20 • MKH-30 • MKH-40 • MKH-50
Small Diaphragm Condenser Microphones
MKH-50
MKH-40
MKH-30
MKH-20
MKH condenser mics represent the perfect fusion between exceptional sound and
precision engineering, and have long been the choice in the most demanding
broadcast applications. Their extremely transparent sound, high sensitivity, and
excellent S/N ratio are perfectly complemented by their exceptionally low inherent
self-noise, extremely low distortion, and unusually flat, linear frequency response.
Their lightweight, durable, and weather-resistant construction makes them
suitable for outdoor applications. Consisting of different pickup patterns, they are
tonally consistent across the entire range because of their lack of coloration. In an
MKH mic, the capsule is part of a tuned circuit in a radio frequency system.
This makes all of them highly immune to humidity, and is responsible for their
exceptionally low self-noise.
MKH-20 Omni-Directional
MKH-40 Cardioid
Low distortion push-pull element, transformerless RF condenser, flat
frequency response, diffuse/near-field response switch (6 dB boost at 10
KHz), switchable 10dB pad to prevent overmodulation. Handles 142dB
SPL with a high output level. Ideal for concert, Mid-Side (M-S), acoustic
strings, brass and wind instrument recording.
MKH-20 - Omni-directional (Mfr# MKH20-P48 • B&H# SEMKH20) .........................Call
Low distortion push-pull element, transformerless RF condenser, high
output level, transparent response, switchable proximity EQ (-4dB at
50Hz) and pre-attenuation of 10dB to prevent overmodulation. Achieves
excellent results in vocal applications when used with a pop screen.
Recommended for most situations, including digital recording and
overdubbing vocals, mid-side (M-S) stereo, and conventional X-Y stereo.
MKH-40 - Cardioid (Mfr# MKH40-P48 • B&H# SEMKH40) ..........................................Call
MKH-30 Figure-Eight
Symmetrical transducer design of the MKH-30 produces an unusually
wide and smooth frequency response. Particularly suited to soloists and
small instrumental groups, it can also serve as an ‘S’ or side microphone
in MS stereo applications. As a support microphone it is particularly useful in the effective suppression of sounds from adjacent sound sources.
MKH-30 - Bi-directional (Mfr# MKH30-P48 • B&H# SEMKH30).................................Call
MKH-50 Super-Cardioid
The MKH-50 offers a higher attenuation of side and rear sounds than the
MKH-40. It is principally designed for use as a spot micr for applications
requiring a high degree of side-borne sound muting and feedback
rejection while maintaining the integrity of on- and off-axis sound fields.
MKH-50 - Super-Cardioid (Mfr# MKH50-P48 • B&H# SEMKH50) .............................Call
(212) 444-6601 • 1-800-947-9901 • Quick Dial 91
650
WIRED MICROPHONES
AKG • AU DI O T E C H NI C A • BEYE R DYNAM I C S
Handheld Microphones
AKG D230 Reporter’s Microphone
A rugged dynamic microphone intended for use in ENG (electronic news gathering) activities in radio and television, the
D230 incorporates a high output rare earth magnet structure designed to deliver exceptional sensitivity and clarity. Its
response is tailored for maximum intelligibility of close-in speech, and its omnidirectional pattern is immune to proximity
effects. The mic has an integral windscreen and is designed for very low handling noise. An internal hum compensation
coil allows microphone use in environments where AC hum fields may be significant. Lightweight (only 8 oz.), the
housing is made of an extremely rugged die cast metal and has a dark matte finish for minimum reflection or glare on
television. The extended shaft allows for easy placement of station flags without typical handling problems.
Includes a stand adapter.
◆
◆
Response tailored for close-in speech requirements for
electronic news gathering (ENG)
Omnidirectional pattern, with integral wind screen and
very low handling noise
◆
High sensitivity (2.5 mV/Pa)
◆
Light-weight die cast metal body with dark matte finish
◆
Hum compensation
D230 Reporter Microphone with Stand Adapter (Mfr # D230 • B&H # AKD230) .......................................................................................179.00
W23 Foam Windscreen (Mfr# W23 • B&H# AKW23).................................................................................................................................................28.20
Audio Technica AT8004
Omnidirectional Dynamic Microphone
The AT8004 (5.93” long) is an omnidirectional dynamic microphone designed for on-location interviews/sports
broadcasting. It offers exceptionally clear and natural reproduction and features internal shock mounting that
minimizes handling and cable noise. The microphone’s omnidirectional polar pattern is ideal for reproduction of
surrounding ambience. Its rugged housing with hardened-steel grille stands up to field use. Also available as the
AT8004L (9.43” long) with an extended-length handle with room for a microphone flag.
◆ Ideal for interviews, sports broadcasting and as the
◆
Rugged housing with hardened-steel grille stands
up to field use.
◆
Internal shock mounting minimizes handling and
cable noise.
“mono” mic used with a stereo microphone.
◆
Omnidirectional polar pattern provides natural
reproduction.
AT8004: Includes a snap-in stand adapter with 5/8”-27 threads and a soft case (Mfr # AT8004 • B&H # AUAT8004) ......CALL
AT8004L: Includes a snap-in stand adapter with 5/8”-27 threads and a soft case (Mfr # AT8004L• B&H # AUAT8004L) .CALL
Beyerdynamic M58
Omnidirectional Dynamic Microphone
The M 58 is designed specifically for electric news gathering (ENG) and electronic field production (EFP) applications.
Designed or interviews, its sophisticated internal shockmount dramatically reduces handling noise, while the mic’s
frequency response is tailored to provide broadcasters with a very accurate and intelligible sound. The M 58’s weightbalanced design provides journalists with a high degree of comfort during lengthy interviews. Its rugged construction
enables the mic to withstand physical and environmental punishment typically encountered during field production
operations. Slim profile and non-reflective Nextel finish result in a low profile on camera. Includes WS-58 windscreen.
◆High output moving coil transducer
◆
Rugged construction
◆
Internal shock mount reduces handling noise
◆
Non-glare, scratch-resistant finish
◆
Extended frequency response with rising high-end for
maximum intelligibility
◆
Weight-balanced, slim-profile design
M58: Omni-Directional Handheld Dynamic ENG Microphone (Mfr# 403660 • B&H# BEM58) .....................................................239.020
www.bhphotovideo.com
WIRED MICROPHONES
C OL E S • E L E C T ROVOI C E
651
Handheld Microphones
COLES 4104B
Noise Cancelling Commentator’s Ribbon Microphone
The Coles 4104B Lip Microphone is a ribbon microphone designed for commentary and speech
capturing in noisy environments. A sensitive ribbon transducer is combined with a directional polar
pattern and flat, low-cut frequency response at 16Hz. The result is accurate signal reproduction
without noise caused by ambiance or proximity effect.
In order to minimize noise and achieve the best frequency response, the Lip Microphone requires the user to position the
microphone close to the mouth. A positioning bar makes contact with the users lip and creates the correct talking
distance between the user and microphone. Stainless steel breath shields protect the capsule against moisture and noise
due to sibilance and plosive sounds. A removable, plastic hygiene shield is available and can be cleaned for reuse or
thrown away. The 4104B is designed for commentary applications in noisy, ambient environments. Directional polar and
linear frequency response with low-cut roll off result in accurate reproduction with minimal noise.
4104B Lip Microphone with case (Mfr# 4104B • B&H# CO4104B)........................................................................................................859.95
ElectroVoice 635A
Dynamic Omnidirectional ENG/EFP Microphone
Probably the most popular and well-known ENG/EFP microphone in the world, the 635A has
survived being dropped, run over, thrown and even being shot while on location for film, TV
and radio remotes. The 635A’s uniform frequency response (80Hz-13kHz) is specially shaped for
up-close vocals. Also available with a Neodymium element (635N/D-B).
635A
635A/B
635A • 635A/B
635N/D-B
◆ Completely pop-free performance
◆ N/DYM element offers higher output
◆ Four-stage pop and dust filter
◆ Uniform 80 Hz to 13kHz frequency response
◆ Internal effective shock absorber
◆ Integral windscreen and blast filter
◆ Includes stand adapter
◆ Acoustalloy diaphragm material for very smooth response
635A (EL635A): Black finish ..........................109.95
635A/B (EL635AB): White finish ..................109.95
over a wide frequency range
635N/D-B (EL635NDB): Black finish.............................................129.95
RE50/B • RE50N/DB Omnidirectional Dynamic Microphones
These shock-isolated, omnidirectional, dynamic mics were created for the most exacting professional
applications. Incorporating advanced shock-mounting techniques, they are designed particularly for
hand-held broadcast and sound reinforcement use. Handling and clothing noise, even cord shock are
isolated from the mic element so that mechanical induced noise is greatly reduced.
◆ No muddy lows when used near lips.
◆ Four-stage pop filter prevents dust and magnetic particles
◆ Acoustalloy diaphragm material for very smooth
response over a wide frequency range.
protection from wind noise, excessive sibilance, and “popping”.
◆ Extremely low handling noise via Dyna-Damp
“mic in-a-mic” shock mount system.
from reaching the diaphragm.
◆ Integral windscreen and blast filter provides excellent
◆ Withstands high humidity, temperature extremes, and
corrosive salt air.
RE50/B: Black finish with stand adapter, vinyl carrying pouch and hard shell case (Mfr #16501707 • B&H #ELRE50B)...........................159.95
RE50N/DB: Same as above with Neodymium capsule (Mfr #16502345 • B&H #ELRE50NDB).............................................................................179.95
(212) 444-6601 • 1-800-947-9901 • Quick Dial 91
652
WIRED MICROPHONES
SE NNH E I SE R • SH U R E
MD46
Handheld Cardioid ENG/EFP Microphone
A cardioid interview mic with studio quality, the MD46 focuses on the subject, increasing
clarity. It has a traditional long handle, wind attenuation and off-axis rejection and is
designed to possess an extended high-frequency response, warm lows, and a clean
midrange. It also eliminates the tendency for a cardioid mic to emphasize plosives
making them undesirable in the field. Sennheiser does this by putting a double layer
in the sound inlet basket, enabling the MD 46 to highlight the desired sound. An optional
windscreen is also available if needed.
◆ Rugged all metal body, integral microphone
clamp thread, double layer grille basket, and
long handle with excellent balance
◆ Low handling and wind noise, and the ability
to eliminate vocal popping, make it the ideal
interview mikc for ENG work.
◆ Frequency response of 40Hz-18 kHz allows
the MD46 to be used in a pinch as an
announcer or guest mic in remotes, auxiliary
studios or at interview turrets.
MD42 Handheld Omni-Directional Microphone
The MD-42 is a rugged handheld reporter’s microphone with omni-directional pick-up pattern
optimized for rough use in live reporting and broadcasting environments. The MD 42 is a very
‘good-natured’ microphone whose design avoids wind and handling noise problems. Its omnidirectional polar pattern ensures maximum intelligibility without having the microphone pointed
directly at the talker. Comes in black with refined steel, black sound inlet basket.
◆ Durable metal housing and shock mounted
capsule for maximum protection against the
rigorous use on the road.
◆ Protective sound-inlet basket lines the metal
capsule and protects against wind and pop
noise.
MD46 - Cardioid Handheld Dynamic ENG Microphone (Mfr# MD46 • B&H# SEMD46) .................................................................................................................................194.95
MD42 - Omnidirectional ENG Handheld Microphone (Mfr# MD42 • B&H# SEMD42).....................................................................................................................................194.95
SONY F-112
Handheld Omni-Directional Microphone
The F-112 is a high-quality,
high performance, durable
handheld dynamic
microphone ideal for
field production and news
gathering application—
especially for interviews.
The F-112 is equipped with a omni-directional microphone capsule achieving
highly sensitive and clear voice pick-up from all directions. Its robust meta
body offers a high level of durability to withstand severe conditions even
in the harshest of environments. In addition, the F-112 offers a well
thought-out ergonomic design which provides a stable grip, as well as
optimized balance – features essential for conducting smooth interviews.
A robust brass connector is provided for repeating cable connections.
F-112 (Mfr # F112 • B&H # SOF112)
Omni-directional ENG Handheld Microphone........................................................159.95
www.bhphotovideo.com
K-TEK
Topper Windscreen for
Handheld Microphones
The new Topper by
K-Tek is a wind
protection system
designed specifically
for handheld mics.
Featuring an exterior
of black fleece lined
with tightly woven
fabric, or with the traditional faux fur (black short
hair) cover, tailored to fit snugly over standard foam
covers. Great for popular microphones like the
EV-RE-50 and Sennheiser MD46.
K-TPR-FF Topper – Faux Fur .051 lbs (23g).
(Mfr# KTPRFF • B&H# KTTHH) ................................................48.95
K-TPR-FL Topper – Fleecy .026 lbs (12g).
(Mfr# KTPRFL • B&H# KTTHHF) ..............................................49.95
WIRED MICROPHONES
SH U R E
653
Handheld Microphones
VP64A/VP64AL
Omnidirectional Dynamic Mic
High-output omnidirectional mics for professional
audio and video production, the VP64A and VP64AL
combine exceptional performance and comfortable
feel with handsome on-camera appearance. Identical
except for their handle lengths, the 7 7⁄8” long VP64A is
ideal for close-up use and can be used outside as well
as indoors. The longer VP64AL is well-suited to location
interviews, sports broadcasting, and other situations
where the 9 5⁄8” length is an advantage. Frequency
response for both is 50 to 12,000 Hz.
◆ The omnidirectional pickup pattern provides uniform
pickup on or off axis, eliminating the need for critical
mic positioning.
◆ Tailored frequency response with mid-range
presence rise adds crispness and clarity to speech.
◆ Neodymium magnet for increased output and
maximized S/N ratio.
SM63
Omnidirectional Dynamic Mic
Elegant, yet rugged, the high output SM63 is designed
for applications where performance and appearance
are critical. Smooth, wide frequency response is tailored
for optimum speech intelligibility. Controlled lowfrequency rolloff reduces pickup of stand and wind
noise. Virtually immune to strong hum fields such as
those produced by studio lighting.
The champagne-finished SM63 is designed for handheld use on stage and in broadcast, recording, and TV
studios, while the champagne SM63L and black-finished
SM63LB are for interviews, sports broadcasts, and other
situations where longer microphones are desirable.
◆ Exceptionally rugged VERA-FLEX grille makes the mic
impervious to dents, rust, corrosion, moisture and
protects against damage from a drop of up to 6’.
◆ Patented shock mount system minimizes handling
noise and stand vibration.
◆ Internal rubber isolation mount protects the micro-
phone cartridge and minimizes handling noise.
◆ Water-resistant mesh grille allows use in adverse weather conditions.
◆ Supplied windscreen further reduces “pop” and wind noise.
VP64A Omni-Directional Handheld Dynamic ENG Microphone
(Mfr# VP64A • B&H# SHVP64A) .....................................................................................77.95
VP64AL Omni-Directional Handheld Dynamic ENG Microphone with
Extended Handle (Mfr# VP64AL • B&H# SHVP64AL)..............................................89.95
◆ Pop filter effectively reduces breath noise.
◆ Includes snap-in stand adapter and case.
The SM63L and SM63LB include a two-stage windscreen designed for
outdoor use under adverse wind conditions.
SM63 (Mfr# # SM63 • B&H# SHSM63) .......................................................................118.95
SM63L Champagne finish (Mfr# # M63L • B&H# SHSM63L).............................132.95
SM63LB Black finish (Mfr# # M63LB • B&H# SHSM63LB) ....................................132.95
MICROPHONE FLAGS
These blank microphone flages accept your graphics.
They feature high-impact news grade construction and high-density foam inserts
2” Black Square (GBMFSSB) ..........................24.95
2.25” White Square (GBMFMSW) ................24.95
2.25” Black Square (GBMFMSB) ..................24.95
2.5” White Square (GBMFLSW) ....................29.95
2.5” Black Square (GBMFLSB) ......................29.95
2.25 x 3.75” W. Triangle (GBMFMTW) .......29.95
2x3” Black Triangle (GBMFSTB) ..................24.95
2.25” White Round (GBMFMRW) ................26.95
2.25 x 3.75” Blk. Triangle (GBMFMTB) .....29.95
2.5” White Round (GBMFLRW) ....................29.95
2.25” Black Round (GBMFMRB) ...................26.95
2.5” Blue Square (GBMFLSBL) ......................29.95
2.5” Black Round (GBMFLRB) .......................29.95
2.25 x 3.75” Blue Triangle (GBMFMTBL) ..29.95
2” White Square (GBMF2W) ........................29.95
2.5” Blue Round (GBMFLRBL) .......................29.95
(212) 444-6601 • 1-800-947-9901 • Quick Dial 91
654
WIRED MICROPHONES
W H I R LW I ND
Accessories for Handheld Microphones
Remote Audio
Fat-Cat
Press Conferencing Equipment
Whirlwind PressPower 2
Universal Windscreen
for Handheld Mics
Active Press Box
The Fat-Cat is a wind diffuser
designed for use with handheld,
short boom, and ENG microphones. It features
a fuzzy outer layer plus two additional inner
layers of open-weave fabric that provides
effective isolation from wind related noise.
Perfect for the Electro-Voice RE-50, Shure
VP-64, AKG D-230, and Beyer M-58.
The press conference standard, the PressPower 2
features 2 mic/line inputs with individual gain controls
and 16 transformer isolated outputs that are individually
switchable for mic or line level operation. It includes a
20-segment LED level meter, an internal test tone
generator, a built-in headphone monitor amp with
volume control, high-pass filters, and phantom power — all conveniently front-panel accessible.
The high-performance input stage provides clean audio even in high RF environments.
Fat-Cat (B&H# REFATCAT) ......................................68.00
The PressPower 2 can be powered by 115/230v AC - 50/60Hz, via four 9v internal batteries or with
an external DC supply (12-36v DC) connected via rear terminals. This allows it to be powered by a
car battery, cigarette lighter, camera pack battery, etc. The unit will automatically switch to DC
back-up power in the event of an AC power interruption.
Schulze-Brakel
Windscreens
8033
Additional active mic/line outputs can be added with the optional 16 channel PRESS2XP Active
Expansion Module. Using the expander module gives you up to 48 total active outputs. Additional
mic outputs can be achieved by adding passive PB Series Press Boxes to outputs set to line level.
9033
PressPower 2 Active Pressbox - No Case (Mfr # PRESSPOWER 2 NC • B&H # WHPP2NC) ..........................1534.95
PressPower 2 Active Pressbox - with Case (Mfr # PRESSPOWER 2 • B&H # WHPP2) .................................1599.95
PressMite Active Press Box
High-quality handheld/ENG microphone
windscreens made of open cellular reticulated
foam. Available in blue and black and in three
sizes: large (15⁄8” inside diameter), medium
(13⁄8”) and small (1”). Add your logo using
standard iron-on transfers.
This compact, active press feed distribution box distributes 12
high-quality mic level signals and 2 line level signals with a high
degree of isolation between outputs. It provides a 60dB gain
adjustment for one mic or line input. The PressMite also features a
built-in headphone amp. Two 9v batteries provide power for over
8 hours of continuous operation, monitored by a Battery OK LED.
The batteries are easily replaced via side-mount trays. A 120v
AC/24v DC power adapter (PS24) is included.
8033 Square Large (B&H # SC8033L), Medium
(B&H # SC8033M) or Small (B&H # SC8033S) ...41.95 Ea.
9033 Triangle Large (B&H # SC9033L), Medium
(B&H # SC9033M) or Small (B&H # SC9033S) ...49.95 Ea.
Foam Mic Flags
In MIC input mode,18v phantom power is selectable and a three segment LED headroom display
speeds level adjustment. If more outputs are needed, PB Series Press Boxes can be connected to the
line outputs to provide up to 48 additional mic outputs. Built to withstand the abuse of public events.
PressMite - 1 Line In to 12 Mic/2 Line Out Active Press Box (Mfr # PRESSMITE • B&H # WHPM) ..............819.95
PB Series Passive Press Boxes
The PB Seriesexpands mic outputs when used with line outs on
PressPower 2 or PressMite active press boxes or any time a line level
feed is available.
4” x 1.8” triangle flag (B&H # SCTFR103) ............28.95
These passive units distribute one line level input to multiple mic level
outputs. (Line level signal MUST be provided into these passive press
boxes. A microphone directly into the input will not provide enough
signal level for proper operation.) Each output is transformer isolated,
provides excellent interchannel isolation and is ground lifted to help
eliminate noise problems. Whirlwind TRSP-2F transformers are used throughout. The boxes are
constructed with rugged, cold-rolled steel. Available with 6, 12, or 24 outputs.
3.3” x 2” round flag (B&H # SCRF855) .................28.95
PB06: 6 Mic Out (Mfr# PB06 • B&H# WHPB06) ..289.95
3.3” x 2” square flag (B&H # SCSF855) ................28.95
PB24: 1 Line In to 24 Mic Out Passive Press Box (Mfr# PB24 • B&H# WHPB24) .................................................748.50
High-quality foam microphone ID flags
available in three different shapes and various
sizes. Available in 2 colors: black and blue. Add
your logo using standard iron-on transfers.
4” x 2” triangle flag (B&H # SCTFR105)................28.95
www.bhphotovideo.com
PB12: 12 Mic Out (Mfr# PB12 • B&H# WHPB12) ...414.95
WIRED MICROPHONES
PSC
655
Accessories for Handheld Microphones
Press Conferencing Equipment
PSC
Press Bridge
The Press Bridge is designed to allow
audio distribution at press conferences.
This 3-input,12-output device provides
transformer-isolated audio feeds at microphone level. This Press Bridge features
two mic level and one line level input, each with independent level controls, thus
it may operate without the use of any additional audio mixer.
An important distinguishing feature of the Press Bridge is its ability to add additional “satellite
style” output modules each with 12 additional outputs, all the way up to a total of 120 outputs.
These freestanding output modules are available as the PSC “Press Train”. Up to 10 Press Train
modules may be remotely located from the main unit via standard microphone cables up to 500’
in length thus eliminating multiple long cable runs to each member of the media.
The Press Bridge is housed in a heavy-duty aluminum case and finished in black powder coat for
durability. It can be powered for more than12 hours from two 9v batteries, or from a 9 to18v DC
adapter. A Sifam V.U. meter and a Internal tone oscillator are provided for level setting purposes.
Press Bridge Audio Distribution Center (Mfr# FPSC0014 • B&H# PSPB) ........................................................1125.75
On-Stage Stands
MY-700
6-Mic Pressbar (Black)
◆ Holds up to 6 microphones
(7 with center mic stand thread)
◆ Cost-effective design for press conference
applications
◆ Side bars are notched at 45 and 90 degrees
in either direction
◆ Main bar- (4) 5/8”-27 male mounts
◆ Side bars- (1) 5/8”-27 male mounts
(Mfr # MY-700 • B&H # ONMY700) .............................19.95
Lenny’s Media Stand
Press Conference
Mic Holder
PSC
Press Train
The Press Train is a 1-input,
12-output passive audio
distribution box designed for
press conferences. This ruggedly built
device can be used in conjunction with the Press Bridge or with any professional
balanced line level source. It accepts a standard +4dBm balanced line level
signal and provides 12 transformer isolated mic level outputs. Custom wound,
mu-metal-shielded transformer’s high input impedance insure that up to 10
Press Trains can be connected to any professional 600 ohm balanced line
without excessive line loading or distortion. Thus, you can obtain120 separate,
transformer-isolated, microphone-level outputs from a single line level source.
In addition, the Press Train includes a high-quality Sifam V.U. meter for level
setting and monitoring purposes.
The Lenny’s Media
Stand is a multimicrophone holder
designed to hold up to 17 microphones with
flags for press conferences applications. It fits
onto the top of any light stand, and no mic
clips are required.
(Mfr# MEDIASTAND • B&H# LEMSQ) .......................114.95
2212-ABH Air Cushioned Light Stand,
4 Sections, Black, 8’.
Mfr# # 2212ABH • B&H# IMLS8AQ).............................34.95
Mic-EZE
Pig-E-Bak
Adjustable
Dual-Mic Clamp
The Press Train has one line level input and two line level loop-through connectors that are used
to feed additional Press Trains. Up to 10 Press Trains may be connected in any daisy chain
configuration without loss of sound quality. Interconnection of additional Press Trains is
accomplished with standard microphone cables. Each of the Press Trains’12 isolated mic level
outputs have isolated grounds to eliminate ground loops.
A double mic clamp
that mounts microphones to microphones for
dual feeds, and is fully adjustable to prevent
phase cancellation. It provides a dual vertical
in-line clamp set with a swing-type center
attachment (black).
Press Train Passive Press Box (Mfr# FPSC0015 • B&H# PSPTQ)..............................................................................470.25
Dual-Mic Clamp (Mfr # PIGEBAK • B&H # MIPB) ..34.95
(212) 444-6601 • 1-800-947-9901 • Quick Dial 91
656
WIRED MICROPHONES
AU DI O- T E C H NI C A
AT875R
Line + Gradient Shotgun Condenser Microphone
Designed for video production and broadcast (ENG/EFP) audio acquisition. AT’s shortest shotgun
microphone, it mounts conveniently on a DV camcorder without adding noticeable heft, and is
ideal for use with compact digital cameras. This high-performance microphone offers a narrow
acceptance angle of line + gradient design. It also features smooth, natural-sounding on-axis audio
quality and excellent off-axis rejection of sound arriving from the sides and rear of mic.
◆ Designed for video production and broadcast (ENG/EFP) audio acquisition. Extremely short length
(under 7”) ideal for use with compact video cameras.
◆ Provides the narrow acceptance angle desirable for long-distance sound pickup. Excellent sound
rejection from the sides and rear of mic. Tailored response minimizes camera and handling noise.
◆ Runs on 11-52v phantom power only
AT875R Short Condenser Shotgun Mic: Includes AT8405a stand clamp for 5/8”-27 threaded stands; 5/8”-27 to 3/8”-16 threaded adapter; windscreen;
soft protective pouch. (Mfr# AT875R • B&H# AUAT875R) .............................................................................................................................................................................................199.95
AT897
Line + Gradient Shotgun Condenser Microphone
The AT897 is designed for field audio acquisition in film/TV/video production, professional recording,
wildlife recording and broadcast applications. It mounts conveniently on DV/HDV camcorders
without adding noticeable heft, and remains out of the frame even with compact cameras. This
high-performance short shotgun offers outstanding long-distance audio pickup due to narrow
acceptance angle of line + gradient design. It also features smooth, natural-sounding on-axis audio
quality and excellent off-axis rejection of sound arriving from the sides and rear of mic.
◆ Designed for video production and broadcast (ENG/EFP) audio acquisition. Short length (11”)
ensures mic stays out of the shot — even when used with compact digital cameras
◆ Smooth, natural-sounding on-axis audio quality. Provides the narrow acceptance angle desirable
for long-distance sound pickup. Excellent sound rejection from the sides and rear of mic.
◆ Switchable low-frequency roll-off
◆ Operates on battery or phantom power
AT897 Short Condenser Shotgun Mic: Includes AT8405a stand clamp for 5/8”-27 threaded stands; AT8134 windscreen; battery; 5/8”-27 to 3/8”-16
threaded adapter; protective carrying case. (Mfr # AT897 ;B&H # AUAT897)........................................................................................................................................................269.95
AT875R
Element
AT897
Condenser
Polar Pattern
Line + Gradient
Frequency Response (AT815B / AT835B)
90-20k Hz
20-20k Hz
Open Circuit Sensitivity1 (Phantom/Batt)
-30dB (31.65mV)
-40dB (11.2mV)
Impedance (Phantom/Batt)
100 Ω
200 Ω
Maximum SPL Input2 (Phantom/Batt)
127 dB
115 dB
Signal to Noise Ratio3
74 dB
77 dB
Dynamic Range-Typical4 (Phantom/Batt)
107 dB
112 dB
Phantom Power (2.0mA Typical)
Battery Type (Life)
Low-Frequency Roll-off
1. re 1V @ 1 Pa
2. 1 kHz at 1% T.H.D. 3. 1 kHz @ 1 Pa
11 - 52V
1.5v AA (up to 1200 hrs.)
12dB/oct @ 80 Hz
4. 1 kHz @ Max SPL
www.bhphotovideo.com
AT897 Shotgun Microphone Kits
AT897 - Shotgun Microphone Kit with Mini Cable:
Includes: AT897, Rode SM3 Universal Shock Mount and XLR to Mini
Impedance Matching Cable. (B&H# AUAT897K2) ..............................................269.95
AT897 - Shotgun Microphone Kit with XLR Cable:
Includes: AT-897, Rode SM3 Universal Shock Mount and 1.5’ XLR Right
Angle Cable. (B&H# AUAT897K) ...............................................................................269.95
AT-897 - Shotgun Microphone Basic Kit:
Includes: AT897, Rode SM3 Universal Shock Mount, Rycote 14cm Medium
Hole Softie, K-Tek KE89CC Aluminum Boompole with Coiled Cable,
Universal Hand grip, 1.5’ and 20’ Right Angled XLR Cables.
(Mfr # AT897BK • B&H # AUAT897BK) ..............................................................................599.95
WIRED MICROPHONES
AU DI O- T E C H NI C A
657
Shotgun Mics
AT8015 • AT8035
Line + Gradient Condenser Mics
Open Circuit Sensitivity1 (Phantom/Batt) -38dB (12.5mV) -39dB (11.2mV)
The 18” AT8015 and 14.5” AT8035 wide-range condenser mics with line +
gradient polar patterns provide the narrow acceptance angle desirable
for long distance sound pickup. They are ideal for use in professional
recording, broadcasting, film/ TV/video production, high-quality sound
reinforcement and other demanding applications requiring excellent
sound rejection from the sides and rear. The shorter AT8035 is well suited
for boom/fishpole use as well as mounting on professional video
cameras, whereas the longer AT8015 has a narrower acceptance angle
and is particularly useful for applications that require a longer reach.
Impedance (Phantom/Batt)
500 Ω
600 Ω
◆
Maximum SPL Input2 (Phantom/Batt)
131 dB
115 dB
AT8035
$
23995
AT8015
$
95
279
AT-815b
Element
AT835b
Condenser
Polar Pattern
Line + Gradient
Frequency Response (AT815B / AT835B)
30-20k Hz
Signal to Noise Ratio3
40-20k Hz
70 dB
Dynamic Range-Typical4 (Phantom/Batt)
106 dB
Phantom Power (2.0mA Typical)
Battery Type (Life)
106 dB
9 - 52V
1.5v AA (up to 1200 hrs.)
Low-Frequency Roll-off
12dB/oct @ 80 Hz
Rugged housing with a lowreflectance matte satin nickel finish.
◆
◆ Excellent sound rejection from the
◆ Includes AA battery, foam wind-
sides and rear of mic.
◆
Powered by a single AA battery or
9-52v DC phantom power.
screen, mic stand adapter with
5/8”-27 threads, and a compartment
carrying case designed to hold the
microphone and accessories.
Recessed switch lets you choose
either flat or a bass roll-off of 80 Hz
at 12dB/octave.
BP4027 • BP4029
Stereo Condenser Shotgun Microphones
BP4027
$
70995
The 15” BP4027 and 9” BP4029 combine professional audio quality, outstanding
versatility and robust construction, making them essential for today’s high-quality
stereo video production. Both feature independent line-cardioid and figure-of-eight
elements configured in an M-S (Mid-Side) arrangement with switch-selectable internal
matrixing. These innovative mics offer a choice of selecting a L/R stereo output
(wide or narrow) via their internal matrixing system or choosing discreet M-Signals
for later manipulation, a flexibility not available from any other manufacturer.
◆
Two internally-matrixed left/right
stereo modes and non-matrixed M-S
mode are switch selectable
Element
Polar Pattern
Open Circuit Sensitivity (Mid/Side/LR Stereo)
Impedance
Maximum SPL Input2
Switchable low-frequency roll-off
◆
Compact, lightweight design provides exceptional
mounting versatility including camera-mount
AT-815ST
AT835ST
Condenser
Condenser
30-20k Hz
40-20k Hz
-30dB (31.6mV) / -34dB (19.9mV) / -36dB (15.8mV)
200 Ω
(Mid/Side/LR Stereo)
Phantom Power (4mA Typical at 48v)
Low-Frequency Roll-off
200 Ω
123dB / 127dB / 126dB
Signal to Noise Ratio3 (Mid/Side/LR Stereo)
Dynamic Range-Typical4 (Mid/Side/LR Stereo)
69900
◆
Line -Cardioid & Figure of 8
Frequency Response (AT815B / AT835B)
BP4029
$
72dB / 68dB / 70dB
101dB / 101dB / 102dB
11- 52v
11- 52v
12dB/oct @ 80 Hz
◆
Include foam wind-screen, microphone
stand adapter with 5/8”-27 threads, and
compartment carrying case
THREE
ST E R E O
MODES
M-S mode provides an independent cardioid element
(Mid) and figure-8 element (Side). The advantage of this
design is that the stereo balance of the separate MidSide signals can be adjusted later on in post-production
instead of in the field.
Two internally-matrixed modes provide traditional
“left-right” stereo that accommodates varying acoustic
environments. The LR-W pattern is wider, allowing
increased ambient pickup, while the LR-N pattern is more
narrow to offer greater rejection with less ambience.
(212) 444-6601 • 1-800-947-9901 • Quick Dial 91
658
WIRED MICROPHONES
AU DI O T E C H NI C A
AT-4071a / AT-4073a
Line + Gradient Condenser Microphones
The AT4071a and AT4073a are transformerless line + gradient condenser
microphones designed to meet the critical long-distance pickup demands
of broadcasting, film/TV sound, professional recording and theater sound
reinforcement. They feature a broad-band, linear on-axis frequency
response, with maximum rejection of sounds from their sides and the
rear. Rear polar lobing, common in shotgun microphones is greatly
reduced and their off-axis response remains highly uniform. The resulting
lack of sound coloration on- and off-axis makes them particularly suited
for miking dynamic action in film/TV audio as well as in “spot” miking
techniques in the music studio or theater.
AT4071A
◆ The effective working distance of a directional mic is determined in great part by its
AT4073A
polar pattern and the uniformity of its off-axis response. However, the S/N ratio also
affects the usable miking distance. The distance may be less if the system S/N ratio is
low because of low mic sensitivity or noisy electronics. The AT4071a and AT4073a
provide extremely high output and a noise floor that is hardly measurable, much less
audible. Use them with confidence in distant miking applications and even under the
stringent demands of modern digital recording systems.
◆ They set new standards in small size and light weight. Overall length is 9.13” (AT4073a) and 15.55” (AT4071a) and at
4 and 5.5 oz. respectively, they
add practically no noticeable weight to the end of a fish pole or the top of a minicam.
◆ Through the use of an advanced design, both the diaphragm and the
◆ They are exceptionally resistant to mechanical or handling noise. An
side ports are exposed to the same acoustic environment. One result
of this is that they are less sensitive to noise caused by wind
turbulence or the “encounter” noise of panning action. And there is
a marked reduction in proximity effect. Recordings made at varying
distances remain more consistent in response, making both
production and editing quicker, easier and less costly.
integral 150 Hz hi-pass filter is available to “roll-off” the low-frequency
response, thereby attenuating unwanted low-frequency ambient noise
(such as air conditioning). The switch is recessed to prevent accidental
activation. Built to withstand rigorous use in the field, they are
powered with any remote “phantom” or “simplex” power source
supplying from 11 to 52v DC.
AT4071a Line/Gradient Shotgun Condenser Capacitor Microphone (Mfr# AT4071A • B&H# AUAT4071A) ...............................................................................................659.95
AT4073a Line/Gradient Shotgun Condenser Capacitor Microphone (Mfr# AT4073A • B&H# AUAT4073A)..............................................................................................549.95
AT-4073
Shotgun Microphone Kits
AT4073 Line/Gradient Condenser Shotgun Mic Kit:
Includes AT4073 Shotgun Microphone, Rode SM3 On-Camera Shock Mount, 1.5’ Right
Angled XLR Cable, AT8405 Snap-in Clamp, Foam Windscreen and Protective Case.
(B&H # AUAT4073AK) ..............................................................................................................................569.95
AT4073 Deluxe Shotgun Mic Kit:
Includes AT-4073a Shotgun Microphone, Rode SM3 On-Camera Shock Mount, Rycote
12cm Medium Hole Camera Mounted Softie, K-Tek KE-100CC Avalon 5-Section
Graphite Fiber Cabled Boom Pole, Impact Universal Mic Hand Grip, 20’ and 18” Right
Angled XLR cables and Impact neoprene boompole bag.
(B&H # AUAT4073ADK) .........................................................................................................................1149.95
www.bhphotovideo.com
AT4073 Deluxe Shotgun Mic Kit
WIRED MICROPHONES
AZ DE N
659
Shotgun Microphones
SGM-1X Super-Cardioid Shotgun
SGM-2X Super-Cardioid Shotgun
Condenser Microphone
Condenser Camera Mountable Microphone
The SGM-1X Professional Shotgun
Microphone provides quality
audio for the videographer. It is
ideal for today’s smaller, digital
video cameras where longer
models would appear in
the frame when camera
mounted. The hyperdirectional super-cardioid
shotgun microphone has a wide frequency response, exhibits low noise
and accepts up to 110dB SPL input levels. The11.8” long microphone uses
a single “AAA” battery that will last over1000 hours due to the mic’s
extremely low current drain. The low-impedance, XLR connectored
SGM-1X ships complete with a windscreen and Azden’s proprietary
shock-mount holder that isolates camera motor noise from the mic. The
holder has provisions for both camera-shoe and mic-stand mounting.
The SGM-2X Professional
Shotgun Microphone System
is designed for both the
Pro-Sound and Broadcast
markets. The microphone
comes with two barrels
making it either an omni
(8.11” long) or, by adding
the extension barrel,
a supercardioid (15.75” long). Either configuration provides a sensitive,
low-noise, wide bandwidth signal through its' balanced, low-impedanced
XLR output. The SGM-2X comes complete with a unique, integrated
shock-mount with both camera shoe-mount and mic stand-mount and
two foam windscreens. The microphone is powered by a single, not
included, “AAA” battery (no Phanton Power), which lasts more than
250 hours.
SGM-1X Super-Cardioid Shotgun Condenser Microphone
(Mfr# SGM-1X • B&H# AZSGM1X) ............................................................................149.95
SGM-2X Super-Cardioid Shotgun Condenser Camera Mountable
Microphone (Mfr# SGM-2X • B&H# AZSGM2X) ...................................................219.95
SGM-1000
Super-Cardioid Shotgun Microphone
The Phamtom-Powered Azden SGM-1000 comes with a windscreen and Azden’s unique shockmount
holder with integrated shoe-mount. Designed for Video and Audio Professionals, the SGM-1000 is a highly
directional shotgun microphone with a wide frequency response and low noise levels. The SGM-1000 can be
powered by external phantom power or a single AA battery.
SGM-1X Super-Cardioid Shotgun Microphone (Mfr # SGM-1000 • B&H # AZSGM1000)....................................................299.95
DPA
4017 Professional Short Shotgun Mic
The DPA 4017 is a short and exceptionally lightweight shotgun microphone, offering a very directional
pickup pattern with the typical natural DPA clarity maintained. It has been designed for a broad range
of uses, from camera systems to fixed positions at sports facilities and for booming in ENG, broadcast,
and film applications. Suppressing unwanted surrounding components to the signal, the 4017 is the
state-of-the-art shotgun microphone with a smooth off-axis sound and large dynamic range. At just
210 mm (8.3”) in length and 71 grams (2.5 ounces) in weight, the DPA 4017 is compact in size and
among the lightest boom microphones available. Extensive research and development has been
undertaken to optimize the sound coming from the sides and from behind. Minimizing the often
very un-linear response of a shotgun microphone due to its side lobes is one of the key objectives
of the 4017. The condenser capsule uses a high voltage pre-polarized back plate, giving the DPA 4017
high output as well as low noise and low distortion.
(Mfr # 4017 • B&H# DP4017) ...1999.00
DPA 4017 features two switching filters incorporated in a brand new switching ring design: High boost +4dB at 8kHz and first order bass
roll-off below 300Hz. A permanent third order high pass filter at 50 Hz removes unwanted low frequency disturbance from handling and
wind noise. Due to its remarkable clarity, wide dynamic range, and excellent rejection characteristics, the DPA 4017 is equally at home in the
recording studio and when used for sound reinforcement and live music miking.
(212) 444-6601 • 1-800-947-9901 • Quick Dial 91
660
WIRED MICROPHONES
NE UM ANN
KMR 81i / KMR 82i
Shotgun Microphones
The KMR 81i and KMR 82i are
shotgun microphones with a
KMR 82i
KMR 81i
high directivity that remains
within the acceptance angle
independent of the frequency.
The advantage is that a sound source, for example an actor on stage, will not change its apparent tonal balance when moving
within this area. Shotgun microphones are particularly useful in recording situations where a microphone cannot be positioned
within the desired distance of the sound source to produce a sufficiently loud signal level.
Typical applications are film and video recordings, where the microphone should not appear in the picture. The KMR 82i is very
often used on stage. The KMR 81i has been specifically designed for electronic news gathering.
F E AT U R E S
Acoustic Features
Filter and Attenuation (KMR 81i)
◆
These mics use a combination of a pressure
gradient transducer and an interference
tube. If the wavelength of the frequency is
longer than the tube length, the mics work
as pressure gradient transducers. At higher
frequencies they operate as interference
transducers for lateral sound.
The microphone has a 10dB attenuation switch to prevent the input of the following unit from
overloading. A second switch activates a 200Hz high-pass filter. Toward the lower frequencies the
sensitivity of the microphone is attenuated by approximately 15dB at 50Hz.
The frequency range above 200Hz is unaffected.
◆
Off-axis sound sources are picked up with
reduced level, but without coloration.
Therefore, the microphones are well suited
to record individual instruments of an
orchestra. The pickup areas of several
shotgun microphones may even overlap,
like during recordings on a large stage,
without causing any problem.
◆
They are less sensitive to wind and pop
noise when compared to other mics with
similar high directivity. The KMR 81i/82i
both feature extremely low self noise, good
impulse response, and high output level.
The shotgun microphones feature very high output capability and a remarkably low
self-noise level. Their low power consumption, light weight, and low sensitivity to wind and
handling noise, make them ideal tools for news gathering on location. Small dimensions,
together with a balanced center of gravity, make handling easy without any whiplash effect.
However, when on location and during strong wind conditions, it is recommended you use
the using an additional wind screen (included). The wind screen is made of polyurethane
foam and also serves as soft padding of the microphone in its leather carrying case. For
mobile use a handle and an elastic suspension are available. An active handle with a built-in
battery power supply makes an external phantom supply unnecessary.
Polar Pattern
◆
These mics have a very directional characteristic. Their mic capsule is positioned
inside a housing tube that is acoustically
open but has a high flow resistance. The
directional patterns of the mics are lobe
shaped. The attenuation of lateral sound is
practically independent of the frequency.
The KMR 82i has a frequency independent
directivity within a pickup angle of 45° for
audio signals that determine the tonal balance of the program material. For the KMR
81i, this angle is 90°.
Using on Location
Filter KMR (82i)
Between 2kHz and 15kHz the KMR 82i has a boost to compensate for HF transmission losses in air
when recording distant sound sources. This may overemphasize any sibilance if the mic is used
close-up. Therefore, a two-position slide switch allows you to select the setting that is best for
balanced upper frequencies. The KMR 82i has a high-pass filter to suppress subsonic interference.
The cutoff frequency may be raised to 120Hz (-3dB) with a built-in two-position slide switch.
KMR 81i
KMR 82i
Acoustical Operating Principle
Interference transd.
Interference transd.
Directional Pattern
Supercardioid /lobe
Supercardioid /lobe
Frequency Response
20-20k Hz
20-20k Hz
Sensitivity
-18mV/Pa
21 mV/Pa
Impedance
150 Ω
150 Ω
KMR81iMT Black Finish (B&H # NEKMR81IMT), KMR81i Nickel Finish (B&H # NEKMR81I)............................1399.00
KMR82iMT Black Finish (B&H # NEKMR82IMT), KMR82i Nickel Finish (B&H # B&H # NEKMR82I) .............1599.00
www.bhphotovideo.com
WIRED MICROPHONES
RODE
661
NTG-1
Directional Condenser Microphone
The NTG-1 is a lightweight condenser shotgun microphone designed for film, video,
television, voice-over and ENG applications. Super-cardioid polar pattern and line plus
gradient acoustic principle effectively minimize audio and noise at the off-axis (sides)
of the microphone, while the front of the capsule accurately reproduces incoming
audio signal. The result is greater intelligibility and S/N ratio while using the NTG-1
in noisy environments. Its also designed to reduce noise caused by handling, rigid
mounting hardware, loose cabling, etc.
The NTG-1 offers wide bandwidth and a controlled polar response coupled with low noise SMT electronics. Powered by an external
+48v phantom power source with an XLR male output, the NTG-1 features a rugged, all metal, lightweight enclosure that is ideal for
camera mounting yet durable enough to withstand the rigors of heavy road use. Ideal for mounting directly to video cameras with optional accessories
or to a Boompole. Supplied windshield effectively suppresses wind noise when recording outdoors in moderate conditions.
NTG-1: Condenser Shotgun Mic with stand mount, zip pouch and windshield (Mfr# NTG-1 • B&H# RONTG1) ...................................................................................249.00
NTG-1 Basic Mic Kit: Includes NTG-1, SM3
Shock Mount and 1.5’ Right Angled XLR Cable
(B&H # RONTG1K) ................................................. 249.95
NTG-1 Deluxe Mic Kit: Includes NTG-1 Shotgun Mic, Rode SM-3 Shock Mount, Rycote 14cm
Medium Hole Softie, K-Tek KE89CC Aluminum Boompole with coiled cable, 1.5’ and 20’ right angles
XLR cables, Universal Hand Grip and Neoprene Boompole Bag (B&H # RONTG1BK) ......................... 559.95
NTG-2 X-Long Directional Condenser Microphone
The NTG-2 is a lightweight (only 5 oz.) condenser shotgun microphone specifically
designed for film, video, television and production.
The NTG-2 provides a balanced low impedance output stage and operates either from an
internal AA battery or 48v phantom power. Wide bandwidth and controlled polar response
coupled with low noise SMT electronics, makes the NTG-2 the perfect choice for film,
video engineering and voice-over work. The NTG-2 is extremely lightweight so it can be
mounted directly to video cameras or on boom poles. Includes windshield to effectively
suppress wind noise when recording outdoors in moderate conditions.
NTG-2: Condenser Shotgun Mic with mount and winshield (Mfr # NTG-2 • B&H # RONTG2) .....269.00
NTG-2 Shotgun Mic Kit: Includes NTG-2 Shotgun Mic, Rode SM3 On-Camera Shockmount, Hosa MIT-156 Low to High Impedance Matching
Transformer, Mic Stand Mount, Windscreen and Zippered Pouch (B&H # RONTG2K2) B&H Kit.............................................................................................................269.95
NTG-2 Shotgun Mic/Boom Kit: Includes NTG-2 Shotgun Mic, Rode SM3 On-Camera Shockmount, Rycote 14cm Medium Hole Softie, K-Tek KE89CC
Aluminum Boompole with Coiled Cable, Impact Universal Microphone Hand grip, 1.5’ and 20’ Right Angled XLR cables and Impact Neopre Boompole
Bag (B&H # RONTG2BK) .......................................................................................................................................................................................................................................................579.95
VIDEOMIC Directional Condenser Microphone
The VideoMic is a professional grade shotgun mic designed for use with high quality
DV/HDV camcorders. The mic exhibits low noise and an unusually wide bandwidth for its
size. It is ultra lightweight, yet rugged due to its ABS construction.
The VideoMic is powered by a standard 9v battery and offers a Low Battery LED status indicator and a
switchable high pass filter to reduce unwanted low frequency rumble. Attaches to any camcorder that
has a standard camera-shoe fitting and utilizes a stereo mini jack for audio output.
◆ Broadcast sound quality
◆
◆
Low noise circuitry
Integrated shockmount
◆
Two step High-Pass Filter - Flat or 80Hz
◆
Rugged reinforced ABS consruction
◆
Integral camera-shoe mount
9V battery powered
◆
Low handling noise
◆
VideoMic: Camera Mounted Shotgun Microphone (Mfr # VIDEOMIC • B&H # ROVM) ....................................................................................................................................149.00
(212) 444-6601 • 1-800-947-9901 • Quick Dial 91
662
WIRED MICROPHONES
SANK E N
CS-1
Short Condenser Shotgun Microphone
The CS-1 is a professional shotgun microphone designed for film, video and broadcast applications. Its slim, compact design allows
on-camera mounting without obstructing the camera's view. The CS-1’s cardioid polar pattern and off-axis rejection combine to
deliver focused, targeted signal while eliminating noise and ambiance at the perimeter of the capsule. Delivers narrow angle
directivity in all frequency ranges—23dB/20kHz, 25dB/10kHz, 26dB/1kHz, 20dB/200Hz.
Utilizing Sanken’s original square condenser capsule, the CS-1 has a flat frequency response well beyond 20kHz, while a high SPL
rating of 137dB allows reproduction of transient signals with no distortion, even at close proximity.
Only 7” long, the CS-1 is ideal for mounting on video and film cameras, and weighing only 3.5 oz., it is easy to maneuver on a boom
pole. It is also effective as a handheld shotgun mic. Supplied rubber O-rings are designed to expand the diameter of the CS-1 to
match larger shock mounts attached to camera bodies (Canon XL-1, Sony DSR-PD-170).
CS-1: With foam windscreen and rubber O-ring (Mfr # CS-1 • B&H # SACS1) ..................................................................................................................795.00
KS-1 Mic Shockmount: Firmly holds the CS-1 in two specially
formulated polymer mounts (Mfr # KS1 • B&H # SAKS1) ....................135.00
US-1 Foam Windscreen (repl.): Effectively reduces wind noise
indoors and outdoors (Mfr # US-1 • B&H # SAUS1).....................................30.00
WH-1 High Wind Cover: Constructed of an acoustic foam base
covered by a thick specially designed synthetic fur fabric.
Attenuates high wind and atmospheric noises that compromise
audio quality (Mfr # WH-1 • B&H # SAWH1) .......................................................55.00
KCS Camera Adapter: Designed to couple a CS-1 with a Sony
camera. Fits in the camera microphone collar and adapts to a
3/8-16 thread. (Mfr # KCS • B&H # SAKCS) ................................................25.00
Rubber O-Rings: Set of 10 to expand the CS-1’s diameter to fit
the larger shockmounts (Mfr # ROCS • B&H # SAROCS) .......................20.00
KCC Camera Adapter: Designed to couple a CS-1 with a Canon
camera. Fits in the camera microphone collar and adapts to a
3/8-16 thread. (Mfr# KCC • B&H# SAKCC) .................................................25.00
KG Handgrip: Universal handgrip for CS-1 and CS-3e shockmounts. Easily attaches to pole or stand (Mfr # KG • B&H # SAKG) ...................................... 65.00
KGW Wired Handgrip: Same as above, but wired with cloth covered cable for maximum noise isolation (Mfr # KGW • B&H # SAKGW) .....................100.00
CS-3E Short Shotgun Microphone
The CS-3e provides convenient camera mountable size with the directional signal reproduction and
range of much larger shotgun mics. Designed for directional dialog capturing in studios or on location.
The CS3e implements three-directional capsules arranged in a front-to-back array resulting in phenomenal supercardioid directivity at high, mid and low frequencies. By rejecting undesired noise and sounds coming from the rear
and sides, it picks up the targeted frontal sound sources with exceptional clarity over a wide frequency range - even
in noisy ambient environments or in long reverberation spaces. Capable of maintaining high signal quality at longer
distances, the CS-3e is ideal for ceiling and overhead placement. In addition to exceptional super-cardioid off-axis
rejection, the mic capsule eliminates low-frequency proximity effect when used close to the signal source. Only 10”
long, the CS-3E is ideal for camera or boom pole mounting.
◆ Three directional capsules are arranged in a front-back array to
◆
The CS-3e offers switchable shotgun stereo/mono/wide, and has a
low-cut switch to satisfy the various needs of location and studio
recording. 19mm diameter permits use of a wide range of accessories
developed for enhanced performance and field mobility.
◆
The CS-3e virtually eliminates proximity effect and maintains sharp
directivity, while the sonic characteristics do not change with varied
distances between sources and microphone.
combine line microphone performance and second-order pressure
gradient response in a single system.
◆
◆
Achieves phenomenal supercardioid directivity in the lowest
frequencies and throughout the full range in a microphone 10” long.
Conventional shotgun microphones use a line capsule array and a
pipe with slits in front of the capsule to create high directivity by
utilizing phase interference inside the casing. However, low/middle
frequency range isn’t achieved, although high-directivity in the high
frequency range is maintained. Shotgun mics designed for high
directivity in the middle/low frequencies need to be almost 40” long,
seriously affecting mobility and are not ideal for field recording.
www.bhphotovideo.com
CS-3E Short Shotgun Microphone (Mfr # CS-3E • B&H # SACS3E) .............1350.00
KS-3 Mic Shockmount: Firmly holds the CS-ee in two specially
formulated polymer mounts. (Mfr # KS3 • B&H # SAKS3) ...............................135.00
CB-483 II Phantom Power Supply: Operates on a single 9-volt battery
and supplies +48V phantom power as well as providing attenuation and
low-cut filter. (Mfr # CB-483 II • B&H # SACB4832) ................................................ 499.00
WIRED MICROPHONES
SANK E N
663
CSS-5
Stereo Shotgun Microphone
(SACSS5)
Based on five directional condenser elements, the CSS-5 is equally responsive in the
horizontal and vertical planes with high sensitivity, wide frequency response and excellent
dynamic range. For film / video documentarie and major broadcast events, it is desirable
to record targeted sounds precisely, with the added option of capturing realistic stereophonic perspectives. Stereophonic localization depends primarily on signal accuracy
and channel separation in the 400Hz to 3kHz range. Pattern control of the CSS-5 has been
optimized in this range. Very low and very high frequency response is optimized along
the frontal axis so that the “target” on-axis sounds are clearly delineated. The result in
playback accentuates the frontal image, with side signals positioned slightly behind.
1,995.00
The directional capsules combine line microphone performance and second-order gradient response in a single system. High directivity is achieved
in a microphone less than 12” long. The CSS-5 is small and lightweight with switchable mono / stereo functions. 19mm diameter allows use of a wide
range of accessories for enhanced performance and field mobility. The CSS-5 provides three switchable modes to satisfy the various needs of location
and studio recording.
Normal Mode
In the NORMAL mode, the CSS-5
clearly picks up the targeted sound
as well as extremely accurate stereo
localization. The STEREO angle is
approximately 115°.
Mono Mode
Wide Mode
In MONO mode, sharp directivity is maintained over a
wide frequency range for the aimed frontal sound
sources, using the combination of a second gradient
mic and a line mic. The CSS-5 picks up the sound
source very clearly even in noisy ambient situations.
WIDE mode is designed for stereo recording of
sound effects where dialogue will be dubbed
in at a later date. This mode allows a wider
140° degree pickup, whereas conventional
M-S microphones have a maximum of 127°.
CSS-5: Stereo Shotgun Microphone (Mfr # CSS-5 • B&H # SACSS5)........................................................................................................................................................................................1995.00
Two-Channel Portable Phantom Power Supply for the CSS-5 (Mfr # CB-485 II • B&H # SACB4852)......................................................................................................................499.00
CMS-10
Camera Mountable Stereo/Mono Shotgun Mic
The industry-standard for use with today’s HD cameras, the compact and lightweight CMS-10 provides
extremely high-resolution audio to match today's advanced picture quality. Uses M-S design to provide stereo
or mono with superior frontal directionality and a rejection of sound from the sides and back, making it ideal
for noisy shooting or reverberant environments. Mono/Stereo switch allows output of a highly directional
mono signal to both L/R channels. The supplied suspension camera-mount eliminates vibrations from both
camera and operator movement. Condenser elements use PPS (Poly-Phenylene Sulfide) diaphragms to
provide exceptional response and optimum humidity / temperature stability.
◆ The CMS-10 uses a unique second-order pressure gradient design,
enabling precision directional response through multiple cardioid
elements in a front-back array. The capsules combine line microphone
performance and second-order gradient response in a single compact
(8.6” long) system.
◆
Virtually eliminates the proximity effect in spite of sharp directivity,
while the sonic characteristics do not change with varied distances
between source and microphone. This is a significant advantage over
all other directional microphones.
◆
Pattern control is optimized in the 400Hz to
3kHz range. this range. Very low and very high
frequency response has been optimized along
the frontal axis so that the “target” on-axis
sounds are clearly delineated. The result in
playback accentuates the frontal image, with side signals positioned
slightly behind.
CMS-10 Shotgun Stereo Mic (Mfr# CMS-10 • B&H# SACMS10)
With SH-10 Suspension Holder and WSJ-10 Softie...............................2195.00
(212) 444-6601 • 1-800-947-9901 • Quick Dial 91
664
WIRED MICROPHONES
SE NNH E I SE R
ME66
Short Condenser Shotgun Microphone Capsule
A popular choice among video, film and ENG/EFP professionals, the ME66
offers classic Sennheiser shotgun mic sound, extremely high sensitivity, and
very low-self-noise, resulting in unprecedented “reach” characteristics for
a mic that can be powered by AA batteries. The ME66 capsule
ME66 with K6 Power Supply
features a highly directional, cardioid polar pattern yielding great
attenuation at the sides of the mic, maximizing pick up at the front. The result is a focused pick-up in highly ambient environments,
meaning its great for interviews in crowded situations. Wide, extremely smooth 40Hz-20kHz frequency response provides for neutral,
uncolored sound in the low- and mid-range frequencies and a gentle boost in high frequencies, for increased intelligibility. The ME66
capsule is powered by the K6 modular power supply. The K6 houses a standard AA alkaline battery and is also capable of accepting
phantom power from outside sources. Its compact design allows camera mounting while remaining free of the frame.
ME66: Short Shotgun Condenser Mic Capsule for K6/K6P (Mfr # ME66 • B&H # SEME66) .....................................................................CALL
ME66/K6: - Same as above with K6 Power Supply. (B&H # SEME66K6J) ..........................................................................................CALL
ME66/K6P: Same as above with K6P (Phantom Only) Power Supply (Mfr # ME66/K6P COMBO • B&H # SEME66K6P) ............CALL
ME66/K6 Kit: ME66 with K6 Module, Windtech SG-1 Windscreen, Rode SM3 Shockmount, 1.5’ Angled XLR cable.
...........................................................................................................................................................................................479.95
B&H # SEME66K6K)
ME66/K6 Kit 2: ME66 with K6 Module, Windtech SG-1 Windscreen, Rode SM3 Shockmount, Hosa MIT-156 Low to
High Impedance Matching Transformer. (B&H # SEME66K6K2) ........................................................................................................479.95
ME66/K6 Boom Kit ME66 with K6 Module, Rode SM3 Shockmount, Rycote 18cm Medium Hole Softie, K-Tek KE89CC
Aluminum Boom pole with coiled cable, Impact Universal Mic Hand Grip, 18” and 20’ angled XLR cables, Pearstone
Neoprene Boompole Bag. (Mfr # ME66BK • B&H # SEME66BK) ..............................................................................................................749.95
ME66 / K6 Kit
ME66/K6 Deluxe Boom Kit: Same as above except with K-Tek KE100CC Avalon 5-Section Graphite Fiber Boom Pole
(Mfr # ME66DK • B&H # SEME66DK) ...................................................................................................................................................................969.95
The ME-66 and ME-67 are powered by the K6 or K6P powering modules. They can run for 150 hours on a single AA battery, or can be used with 12 to
48v phantom power. The K6 features an on/off switch with LED battery status indicator; and a bass roll-off switch which will compensate for proximity
effect in close miking, or for wind rumble in field recording. The K6P phantom powering (only) module provides an alternative to the K6 that is 42mm
shorter, while offering the same integrated bass roll-off switch.
ME67 Super-Cardioid Spot Shotgun Condenser Microphone
The ME-67 is a long shotgun mic capsule designed primarily for capturing
low-level sounds. Its extremely directional design brings distant sound sources
into close range, with the extremely tight focus of the on-axis signal. As with the
ME66, its frequency response has been optimized for a natural presentation, with
good articulation of high frequencies. With a precise combination of high sensitivity
and low self-noise, the ME67 is outstanding in difficult acoustic environments.
Frequency response is 40Hz - 20kHz. Powered via the K6 and K6P powering
modules, the ME67 comes in matte black with an anodized, scratch resistant finish.
ME67 with K6 Power Supply
(Mfr# ME67K6 • B&H# SEME67K6) ..............................................................................468.95
ME67/K6 Boom Kit: ME67 with K6 Powering Module, 2AA batteries,
Audio Technica AT8415 Universal Shock Mount, AT8469 Camera Shoe
Mount to 5/8-27” Threaded Base Adapte, K-Tek K-SUS Microphone
Suspenders (Pair), Rycote 29cm Medium Hole Softie, K-Tek KE89CC
Aluminum Boom pole with coiled cable, Impact universal hand grip,
18” and 20’ right angled XLR cables. (B&H# SEME67BK) .............................874.95
ME67/K6P - Same as above with K6P (Phantom Only) Power Supply
(Mfr# ME67K6P • B&H# SEME67K6P) ..........................................................................499.95
ME67/K6 Deluxe Boom Kit- Same as above except with K-Tek KE100CC
Avalon 5-Section Graphite Fiber Boom Pole (B&H # SEME67DK) ........1,089.95
ME-67 Long Shotgun Capsule
ME67: Super-Cardioid Spot Shotgun Condenser Microphone Capsule
for K6/K6P (Mfr # ME67 • B&H # SEME67)..........................................................................299.95
ME67/K6 - Same as above with K6 (Battery/Phantom) Power Supply
www.bhphotovideo.com
WIRED MICROPHONES
SE NNH E I SE R
665
MKH-416
Super-Cardioid Short Shotgun Microphones
The black, all-metal MKH-416 is a short gun interference
tube microphone. Its excellent directivity and compact
design, high consonant articulation and feedback
rejection make the MKH-416 a superb all-round
microphone for film, radio and television, especially for
outside broadcast applications. Transformerless, RF condenser designed as a combination of pressure gradient and interference tube microphones.
Features high sensitivity, very low inherent self-noise, low proximity effect and can handle SPL up to 128dB. Rugged and resistant to changing climate
conditions. Ideal for boom, fishpole, and camera mounting as a long-distance microphone for video, film, and studio recording. An excellent ENG mic
for reporters or as a podium or lectern microphone.
MKH-416: With MZW-415 Windshield (Mfr # MKH416-P48U3 • B&H # SEMKH416P48) ..............................................................................................................................................CALL
MKH-416 Deluxe Kit: Includes: MKH-416, Universal Shockmount, Rycote Softie, cabled Boom Pole,
Universal Hand Grip and right angled XLR cables. (B&H # SEMKH416DK) .....................................................................................................................................................1699.95
MKH-416 Ultimate Kit: Includes MKH-416, Rycote Windshield Kit, cabled Boom Pole and Canare XLR cable. (B&H # SEMKH416UK) .................................2259.95
RF Condenser Microphones
MKH condenser mics represent the perfect fusion between exceptional sound and precision engineering, and have long been the choice of the
most demanding professionals in the broadcast, theatrical, and motion picture industries. Their extremely transparent sound, high sensitivity,
and excellent S/Nratio are perfectly complemented by their exceptionally low inherent self-noise, extremely low distortion, and unusually flat,
linear frequency response. Lightweight, durable, and weather-resistant construction makes them suitable for outdoor applications. In every
MKH mic, the capsule is part of a tuned circuit in a radio frequency system. This makes them highly immune to humidity, and is responsible
for their exceptionally low self-noise. In addition, their symmetrical push-pull capsule design incorporates optimum resistive loading, which
virtually eliminates intermodulation distortion.
MKH-60 • MKH-70
Short and Long Super-Cardioid Shotgun Microphones
Versatile and easy to handle, the MKH-60’s superb lateral sound muting makes it an
MKH-70
excellent choice for film and reporting applications. High degree of directivity
throughout the whole frequency range ensures high sound quality for distance
applications. Incorporates short interference tube RF condenser, lightweight metal
alloy, and transformerless, low noise symmetrical capsule design. Phantom-powered,
MKH-60
it features smooth off-axis frequency response, switchable low cut filter (-5dB at 100Hz),
high frequency boost (+5dB at 10kHz) and 10dB attenuation. Handles very high SPL
(135dB). Widely used in film, theater and TV productions. Ideal for broadcast, sports
and interviews in crowded or noisy environments. Excellent for studio voice-overs.
The MKH-70 is a lightweight, long shotgun microphone. Its excellent directivity is
particularly suited to shooting in difficult conditions, such as high background noise and distance microphone positioning. Its frequency-independent
directivity prevents sound coloration from off-axis sound sources. Extremely rugged, the MKH-70 features low distortion push-pull element, low
noise, switchable presence (+5dB at 10kHz), low cut filter (-5dB at 50Hz) and 10dB pad. Handles 133dB SPL with excellent sensitivity and high output
level. Ideal for video/film studios, theater, sporting events, and nature recordings.
◆
Exceptionally low inherent self-noise
◆
Infra-sonic cut-off filter
◆
Symmetrical transducer technology ensures
extremely low distortion
◆
Transformerless and fully floating balanced
output
◆
Switchable pre-attenuation, roll-off filter and
treble emphasis
◆
Lightweight, rugged, weather-proof black
anodized metal bodies
MKH-60: with MZQ-40 stand adapter (Mfr# MKH60-P48 • B&H# SEMKH60) .......................................................................................................................................................1539.95
MKH60 Kit: Includes: MKH-60 , Rycote Windshield Kit, cabled Boom Pole and Canare XLR cable. (B&H # SEMKH60UK) ...........................................................2619.95
MKH-70: (Mfr# MKH70-P48 • B&H# SEMKH70 ................................................................................................................................................................................................................1649.00
(212) 444-6601 • 1-800-947-9901 • Quick Dial 91
666
WIRED MICROPHONES
SE NNH E I SE R
MKH-418S
Stereo Shotgun Microphone
The MKH-418S is a professional stereo
shotgun microphone featuring high constant
articulation, excellent feedback rejection and
functional versatility—making it a superb all-round, cost-effective choice for film, television, and multi-media
applications. The MKH-418S incorporates Mid/Side (M/S) technique, yielding a high degree of directivity and focus while
reproducing signals with extreme accuracy to their perspective placement, within the L/R stereo field.
◆
The MKH 418S features 2 independent acoustic systems for generating the mid and side signals. The mid (M), or mono signal is generated using an
internal shotgun microphone that accurately reproduces audio with extreme focus, emphasizing pick up of signals at the direct-axis section (front).
It also rejects signal at the off-axis sections (sides) of the microphone, minimizing noise and further strengthening the pick up area. The Side (S),
or stereo signal is generated using a separate, internal mic system that features a figure-of-eight polar pattern. This system is responsible for
reproducing the spacial character needed for accurate placement of signal within the stereo field.
◆
5-pin XLR output, capable of sending the separate signals of each
internal microphone system to discrete channels of a console, field
mixer, recorder or matrixing system.
◆
Each internal microphone requires +48V phantom power, supplied via
two Sennheiser MZA 14 P48 battery power supply units, or any mixer
capable of supplying at least 2 discrete channels of phantom power.
MKH-418S (Mfr# MKH418S • B&H# SEMKH418S) ...........................................................................................................................................................................................................1659.95
MZS20-1:
Combination shock mount, pistol grip
and stand adapter for ME-66 and ME-67
as well as MKH Series microphones.
◆ Required for mounting in MZW
“blimp” windscreen.
◆ May be boom or stand mounted.
Requires MZA-216 adapter (included).
◆ Includes interchangeable mic clips for MKH-416 or MKH-60/70.
MZS20-1 (Mfr # MZS20-1 • B&H # SEMZS201)...................................................343.50
Blimp Windshields
(Require MZS20-1)
Rigid “blimp” windscreen for ME66, MKH-416
and MKH-60.
(Mfr # MZW60-1 • B&H # SEMZW601) ..................309.95
Rigid “blimp” windscreen for ME-67/MKH-70.
(Mfr # MZW70-1 • B&H # SEMZW701) ..................348.50
SH U R E SM89
Shotgun Condenser Microphone
The SM89 is a highly directional condenser shotgun
mic ideal for on-location film, television production,
spot news coverage and wildlife recording.
◆ Discriminates at a distance against ambient noise –
even in noisy surroundings.
◆ On-axis frequency response is very smooth and
extended. For clarity and speech intelligibility, a
slight presence rise optimizes the high-frequency
response to compensate for high-frequency losses.
◆ Low-frequency roll-off minimizes pickup of wind,
mechanical vibration and ambient noise without
affecting voice frequencies.
◆ Off-axis response is virtually free of comb-filter
effects. This is important when you can’t aim the mic
precisely or when you want to pick up dialogue or
sound from moving sources.
◆ Operates on 11 to 52v DC phantom supply.
Long Hair Wind Muffs
Long hair wind muffs
greatly reduce high velocity
wind-noise when used
with MZW series blimp
windshields and MZS-20-1
pistol grip/shock mount.
For ME-66, MKH-416, MKH-60 (Mfr # MZH60-1 • B&H # SEMZH601).199.95
For ME-67, MKH-70 (Mfr # MZH70-1 • B&H # SEMZH701) .........................214.95
www.bhphotovideo.com
◆ Extremely lightweight, can be suspended on fishpole
for long periods of time without operator fatigue.
◆ Includes foam windscreen and strong luggage-grade
carrying case.
SM89 (Mfr # SM89 • B&H # SHSM89) ....................................629.95
A89SM Shockmount: Designed for the SM89, the A89SM utilizes dual
shock isolators and a cable locking design to eliminate noise associated
with stands, booms, fishpoles, and cable movement. Mounting options
include 5/8”, 3/8” and 5/16” thread adapters for stands and booms ......99.95
WIRED MICROPHONES
SH U R E
667
VP88 M-S
Single Point Stereo Condenser Microphone
The VP88 is a single-point, stereo condenser mic for use in field production, electronic news gathering (ENG),
and studio broadcasting applications. It combines two condenser cartridges in a single housing to create a
stereo audio image of the sound source. It is unique in its ability to capture the realism of a live event and yet
able to withstand the rigors of field production.
The VP88 uses a time-coherent mid-side (M-S) design for optimal stereo imaging. One mic cartridge (Mid) faces
forward to capture on-axis sound using a cardioid pickup pattern. The other mic cartridge (Side) is bi-directional,
capturing sound from either side. The VP88 contains an internal M-S matrix with three settings for different
degrees of stereo image separation. The internal matrix can be bypassed if an external matrix is used or if
stereo imaging is done in post-production. Switches on the top of the microphone control output mode, stereo
imaging, low-frequency rolloff settings, and battery on/off.
◆ Mono compatibility ideal for broadcast applications.
◆ 40 to 20kHz frequency response; low noise and distortion;
wide dynamic range.
◆ Built-in “pop” filter provides protection against moderate
breath or wind noise.
◆ Operates on phantom power or a 6v camera battery.
◆ Selectable, low-frequency rolloff (12dB/octave below 80Hz)
for reduced pickup of ambient noise and stand vibration.
◆ Internal shock mount for reduced handling noise.
◆ LED power indicator.
◆ Supplied with a multi-connector “Y-splitter” cable, foam wind-
screen, swivel stand adapter, 6v battery, and zippered case.
VP88 M-S: Cardioid Stereo Condenser Mic (Mfr # VP88 • B&H # SHVP88) .......................................................................................................................................................689.95
25’ Extension Cable for VP88 (Mfr # C110 • B&H # SHC110) .......................................................................................................................................................................................66.95
A88SM Isolation Shockmount: The A88SM provides optimum isolation from stand-transmitted shock and vibration, making the VP88 M-S ideal for
critical studio applications. It also contains a standard mounting foot for use with most ENG video cameras (Mfr # A88SM • B&H # SHA88SM) ....................158.50
SC H OE PS CMIT 5U
Professional Condenser Shotgun Microphone
Designed for professional film and video, the CMIT 5U is a long
shotgun microphone that captures dialog with great detail and
accuracy. Lightweight with a robust, all-metal housing, the mic
features a directional pattern with low-coloration at the off-axis sections of the capsule. At medium frequencies the directivity
of the CMIT 5U is higher than one would expect from a mic of this length, while at high frequencies the pickup pattern is not as
narrow as with long shotgun microphones. Thus in active scenes it is easier to cue the boom and keep actors ”on mike.”
◆ Unlike some other shotgun microphones, the directional pattern and sound quality are consistent in both the
horizontal and vertical planes.
◆ Three pushbutton-activated filters allow the microphone to adapt to all recording situations:
— High-frequency emphasis (+ 5 dB at 10 kHz) enhances speech intelligibility, and compensates for high-frequency
loss caused by windscreens;
— A steep low-cut filter (18 dB/oct. below 80 Hz) suppresses wind and boom noise;
— A gentle low-frequency rolloff (6 dB/oct. below 300 Hz) compensates for proximity effect.
◆
Pairs of LEDs next to each pushbutton indicate the status of the filters. Even in darkness you can read the settings
and see that the microphone is operational. The settings are retained when the microphone is switched off.
CMIT 5U (Mfr# CMIT5U • B&H# SCCMIT5U)
Includes polished wood carrying case, SG-20 swivel joint, W140 foam-type windscreen .................................1995.00
(212) 444-6601 • 1-800-947-9901 • Quick Dial 91
668
WIRED MICROPHONES
SONY
ECM-673 • ECM-674 • ECM-678
Electret Condenser
Short Shotgun Microphones
ECM-678 shown
Sony’s short shotgun microphones (ECM-673, ECM-674,
in a mount
ECM-678) deliver excellent sound performance in field and
studio production applications at an affordable price.
Optimized for use with Sony compact camcorders such as
the HDV™ Series and DVCAM Series, they offer high
sensitivity, low-noise characteristics, and a flat-and-wide
ECM-673
frequency response in a compact and lightweight body.
In addition, their highly directional response and extreme
durability allow clear voice pickup, even in harsh operational environments. With its high performance, compact design,
and high durability, they are the ideal choice for quality-critical sound acquisition applications.
F E AT U R E S
◆ The ECM-673 and ECM-674 offer an excellent
sensitivity of -36dB and a low inherentnoise level of less than 17 dB SPL. This allows
them to be used for clear voice pickup, even
in noisy environments.
◆
The ECM-678 delivers a superb sensitivity of
-28dB and low inherent noise of less than
16dB SPL providing the clearest pickup of
even the faintest sounds at long distances.
◆
They have a flat and- wide frequency
response (40 Hz to 20 kHz) and deliver
extremely smooth and natural sound
reproduction.
◆
They are designed as highly directional,
compact and lightweight short shotgun
mics maintaining good balance even when
mounted on compact camcorders.
— ECM-673 is 7 7⁄8” long and weighs 4.7 oz.
— ECM-674 is 10 5⁄8” long and 6.5 oz.
— ECM-678 is 9 7⁄8” long and 7 oz.
◆
The vibration-resistant mechanisms of the
ECM-673 and ECM-678 offer high durability
and reliability, making them suitable for the
harshest environments in field sound
acquisition.
◆
The each feature a built-in two-position
(M, V) low-cut switch providing a simple
method of reducing the effects of unwanted
ambient noise.
◆
The mics are powered by external DC 40-52v
phantom power. The ECM-674 can also be
powered by a AA battery. In addition, the
ECM-674 has a built-in battery liquid
leakage protection circuit.
ECM-680S
MS Stereo Shotgun Microphone
An MS stereo shotgun mic, ideal for a broad range of field production
and broadcast studio applications. It offers excellent sensitivity, low
inherent noise, and a flat-and-wide frequency response. The most
distinguished feature of the ECM-680S is its switchable operation
between a highly directional monaural mode and stereo mode.
Monaural mode provides highly directional sound pickup, while stereo
mode delivers natural and spatial sound. Compact and lightweight, the
ECM-680S is well-suited to use with a range of professional camcorders.
In addition, it can be mounted on a boom pole for more versatility.
◆
Can operate in stereo mode —for
capturing environmental sound with
natural sound quality, or monaural
mode— for clearly capturing voice
and sound from a distance.
◆
Has a flat-and wide frequency response
(50 Hz to 20 kHz (stereo)/40 Hz to 20
kHz (monaural)) in both stereo and
monaural modes, and will provide
sound reproduction that is extremely
smooth and natural.
◆
Built-in two-position (M, V) low cut
switch provides a simple method of
reducing the effects of undesired
ambient noise.
◆
Only 9 7⁄8” long and less than 4.9 oz. the
ECM-680S maintains good balance and
mobility when mounted on a range of
professional camcorders.
◆ Uses the Mid-Side (MS) technique that
offers natural stereo sound and excellent
localization. Equipped with large
diaphragm mic capsules with
bi-directional characteristics, the
ECM-680S delivers a superb sensitivity
of -28 dB (stereo)/-32 dB (monaural),
and extremely low inherent noise of less
than 20 dB SPL (stereo/monaural).
ECM-673 (Mfr # ECM673 • B&H # SOECM673) ............................................................................................................295.00
ECM-674 (Mfr # ECM674 • B&H # SOECM674) ............................................................................................................345.00
ECM-678 (Mfr # ECM678 • B&H # SOECM678) ............................................................................................................650.00
ECM-680S (Mfr # ECM680S • B&H # SOECM680S) ......................................................................................................850.00
www.bhphotovideo.com
WIRED MICROPHONES
C RYSTAL PART NE R S
669
PARABOLIC MICROPHONES
BIG EARS
Parabolic Microphone Kit
The Big Ears parabolic reflector was designed to
make impossible sound gathering situations easy
for both field recordists and broadcast professionals.
It is constructed from a custom plastic material that
has been specially developed to deliver remarkable
audio clarity over a wide frequency range, without
the cumbersome weight. The dish is molded to
extremely tight tolerances and its “sweet spot” can
be fine-tuned to adjust to varying situations. There
are even two side mounting plates to accommodate
mounting transmitters and receivers for wireless
communications.
*Not for tactical use
Latest generation of the state of the art parabolic microphone reflector . Comes complete with Sport handle set, transmitter attachment plate and
universal Mic yoke. Big Ears uses acoustically isolated foam vinyl covered handles that also acts as a support bar for freestanding use. Two side
mounting plates are incorporated in the handle design to accommodate mounting of transmitters and receivers for wireless communications. The
handles and microphone yoke are easily detachable for convenient nested storage of multiple units.
Because the unit is often used in sports situations, significant thought has been given to the safety of the design. The dish is shatter and break
resistant and the handle materials are selected and assembled with safety in mind. Big Ears is lightweight and can be easily mounted permanently
when the need occurs.
Pick-up Pattern: 30” diameter target at 100’ (tunable)
Useful Range: 5’ to 500+’ maximum (dependent on environment,
atmospheric conditions and surrounding noise levels)
◆ Size: 25.5” x 26.5” x 10” ◆ Parabola size: 23” ◆ Weight: 5 lbs.
◆
◆
Big Ears Super Kit: (Mfr # BE3K/SCLEAR • B&H # CRBE3KSC): Includes BE3 Big
Ears Parabolic Dish (Clear), Custom Sennheiser MKE 2 Mic, Lavalier
Holder, HD1 Headphone, MD1 Bridging Amplifier, RD1 Electronic Site,
DS1 Neck Strap, Carrying Case and Silent Gloves ..............................4499.00
LIL’ EARS Parabolic Microphone Kit
The Lil’ Ears parabolic reflector is the ENG version of Big Ears. Designed along the same
guidelines as its bigger brother with a smaller package in mind, it comes complete with
handle and yolk. Ideal when it isn’t possible to make use of a larger dish in tight ENG
environments— since large size may prohibit mobility and the coverage distances may
not be as great. The smaller size is also a plus when it comes to speed and portability.
This ready-to-use broadcast package comes complete with handle and yoke, and is
designed for handheld, mic stand, or camera mount use.
◆
Pick-up Pattern: 24” diameter target at 100’ (tunable).
◆
Size: 16” x 15” x 5” overall.
◆
Useful Range: 3’ to 350+’ maximum (dependent on environment,
atmospheric conditions, and surrounding noise levels).
◆
Parabola size: 13”.
◆
Weight: 2 lbs.
Lil’ Ears Parabolic Mirophone Super Kit (Mfr # BE4K/SCLEAR • B&H # CRBE4KSC)
Includes BE4 Lil’ Ears Parabolic Dish (Clear) , Custom Sennheiser MKE 2 Microphone, Lavalier Holder, HD1 Headphone, MD1 Bridging Amplifier, RD1
Electronic Site, DS1 Neck Strap, Carrying Case and Silent Gloves ............................................................................................................................................................2999.95
(212) 444-6601 • 1-800-947-9901 • Quick Dial 91
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising