User’s Guide TEW-AI86D TEW-AI86DB

User’s Guide TEW-AI86D TEW-AI86DB
User’s Guide
TEW-AI86D
TEW-AI86DB
size: W 75mm x H135mm
total pages: 39
Table of Contents
Español ..................................................................................... 1
1. Antes de iniciar ................................................................ 1
2. Instalación del Hardware ................................................. 2
Troubleshooting ........................................................................ 7
Version:01.04.2006
Version: 11.28.05
1. Preparación para la instalación
Contenidos del paquete
TEW-AI86D/TEW-AI86DB
Base para montar la antena
(sólo para TEW-AI86DB)
Guía del Usuario
Kit de montaje (sólo para TEW-AI86DB)
Detalles del producto
La antena interior direccional tiene un conector hembra SMA
inverso que puede conectarse a su punto de acceso o adaptador
de red inalámbrico
ADVERTENCIA: La antena puede inclinarse de 0° a 180° y
rotar a 360°. El cable de la antena interior es fijo por tanto no rote
la antena más allá de 360°.
Montaje en pared/ tabique (base para antena con imanes
integrados)
Para el despliegue de la antena, puede montar la antena sobre
una pared usando las piezas de fijación y los tornillos incluidos o
con sólo adherirla sobre superficies de metal.
1
Español
2. Instalación del Hardware
Dispositivos recomendados para conectar con
esta antena
Estaciones para base inalámbrica con antena (s)
desmontable:
Para focalizar la emisión de señal y alcanzar un rango de
cobertura más amplio en su casa u oficina, la antena genera una
señal direccional amplia de 80°.
Adaptador PCI inalámbrico o cámara IP con antena
Recomendación: Debido a la naturaleza bidireccional de los
dispositivos WiFi (recepción/transmisión), se recomienda que
instale antenas externas sobre la estación base AP o cliente.
2
Español
Posición de instalación recomendada
La antena TEW-AI86D tiene cobertura de señal direccional de
80°. Por tanto, la posición ideal para la antena está en la esquina
del área de cobertura.
Las antenas TEW-AI86D pueden también colocarse al lado o en
el borde del área de cobertura para un rango de transmisión
amplio en el vestíbulo o pasillo.
3
Español
Métodos y configuración para montar la base de la
antena
POR FAVOR LEA LOS SIGUIENTES PASOS DE
INSTALACIÓN ANTES DE EMPEZAR A PERFORAR ORIFICIOS
EN LA PARED.
Presione
la lengüeta
Quite la tapa
o cubierta
Retire la placa
de peso
Tras quitar la cubierta inferior de la base, retire la placa de peso
de metal de las horquillas para techo, desvelando así los orificios
para tornillo.
Con el fin de reducir el peso y aumentar la potencia
magnética, es altamente recomendable retirar el plato de
metal antes de instalar la antena en un techo, un tabique o en
cualquier superficie de metal.
4
Español
Seleccione
la ubicación
Coloque la
plantilla base
Marque la posición
del tornillo
ADVERTENCIA: Asegúrese de que el dispositivo AP/Cliente
puede alcanzar la posición de la antena seleccionada (el cable de
la antena es de 1 metro/ 6 pies)
Tras haber marcado la pared para indicar los lugares de
perforación apropiados, vuelva a ensamblar la base de la antena
sin el peso de metal. Las horquillas no deberían sobresalir.
Sobre los tornillos
Tras perforar los orificios en las láminas de yeso/ gypsum/ placas
de yeso, sumerja los anclajes plásticos dentro del orificio (cabeza
de perforación de 1/8 pulgadas (3mm)). Deje aproximadamente
de 3 a 5 mm (1/8 pulgadas) del tornillo roscado expuesto) tal
como se representa en los diagramas de abajo.
3mm
5
Español
Montaje en techo mediante el uso de horquillas o
imanes
Esta característica especial de montaje en techo se recomienda
para usar principalmente cuando la estación base inalámbrica
está escondida por encima del techo o si se utiliza algún tipo de
caja protectora antirrobo.
6
Español
Cómo ensamblar la base de la antena para usar
con los sistemas del techo
Déle la vuelta a la
cubierta para exponer las
horquillas para techo
Presione la lengüeta
y levántela
Oculte el enrutador/ AP
Fije las horquillas
al empalme de tubos en T
Nota: Si el empalme de tubos en T del techo es de acero, no
será necesario que voltee la cubierta de la antena, dado que la
base tiene imanes integrados que pueden ser usados para adherir
la antena al empalme de tubos en T del techo.
7
Español
Troubleshooting
Q1. How come I cannot transmit or receive Wi-Fi signals with my TEWAI86D?
A1. The TEW-AI86D is a directional antenna and can only send and
receive signals from the front panel. Make sure to adjust the position
of the antenna by directing the front panel to laptops, PCs or other
wireless devices.
Q2. My access point indicates that it is receiving power, and my laptop
is within range of the TEW-AI86D. However, my laptop does not
receive any signals from my access point.
A2. Make sure that you properly connect the antenna to the Wi-Fi
Access Point. (See 2. Hardware Installation)
Q3. Why won’t the TEW-AI86D work with my IEEE 802.11a Wireless
Router or Access point?
A3. Yes. The TEW-AI86D is compatible with IEEE 802.11a/b/g
wireless devices.
Q4. Is it necessary to use the tapping screws or the wall anchors that
come with the TEW-AI86DB?
A4. It is only necessary if you decide to mount the TEW-AI86DB at a
permanent location. Use discretion when attaching mounting
brackets to the TEW-AI86DB.
If you have any questions regarding the TEW-AI86D/TEW-AI86DB, please
contact TRENDnet Technical Support Department.
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received.
Including interference that may cause undesired operation.
Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you
Local Authority or Retailer for recycling advice.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
8
Limited Warranty
TRENDnet warrants its products against defects in material
and workmanship, under normal use and service, for the
following lengths of time from the date of purchase.
TEW-AI86D/TEW-AI86DB - 3 Years Warranty
If a product does not operate as warranted above during the
applicable warranty period, TRENDnet shall, at its option and
expense, repair the defective product or part, deliver to
customer an equivalent product or part to replace the
defective item, or refund to customer the purchase price paid
for the defective product. All products that are replaced will
become the property of TRENDnet. Replacement products
may be new or reconditioned.
TRENDnet shall not be responsible for any software,
firmware, information, or memory data of customer contained
in, stored on, or integrated with any products returned to
TRENDnet pursuant to any warranty.
There are no user serviceable parts inside the product. Do
not remove or attempt to service the product by any
unauthorized service center. This warranty is voided if (i) the
product has been modified or repaired by any unauthorized
service center, (ii) the product was subject to accident, abuse,
or improper use (iii) the product was subject to conditions
more severe than those specified in the manual.
Warranty service may be obtained by contacting TRENDnet
office within the applicable warranty period for a Return
Material Authorization (RMA) number, accompanied by a copy
of the dated proof of the purchase. Products returned to
TRENDnet must be pre-authorized by TRENDnet with RMA
number marked on the outside of the package, and sent
prepaid, insured and packaged appropriately for safe
shipment.
9
WARRANTIES EXCLUSIVE: IF THE TRENDnet PRODUCT
DOES NOT OPERATE AS WARRANTED ABOVE, THE
CUSTOMER'S SOLE REMEDY SHALL BE, AT TRENDnet'S
OPTION, REPAIR OR REPLACEMENT. THE FOREGOING
WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN
LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,
EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR
OTHERWISE, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. TRENDnet NEITHER ASSUMES NOR AUTHORIZES
ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER
LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION
MAINTENANCE OR USE OF TRENDnet'S PRODUCTS.
TRENDnet SHALL NOT BE LIABLE UNDER THIS WARRANTY IF
ITS TESTING AND EXAMINATION DISCLOSE THAT THE
ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR
WAS CAUSED BY CUSTOMER'S OR ANY THIRD PERSON'S
MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING,
UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY
OTHER CAUSE BEYOND THE RANGE OF THE INTENDED
USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER
HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED
BY LAW TRENDnet ALSO EXCLUDES FOR ITSELF AND ITS
SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT
OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE
DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR
PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR
DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE, USE, PERFORMANCE, FAILURE, OR
INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES,
AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR
REFUND OF THE PURCHASE PRICE PAID, AT TRENDnet’S
OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES
WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN
SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the
laws of the state of California.
10
TRENDnet Technical Support
US/Canada Support Center
European Support Center
Contact
Contact
Telephone: 1(888) 777-1550
Fax:
1(310) 626-6267
Email: [email protected]
Telephone:
Deutsch: +49 (0) 6331 / 268-460
Français: +49 (0) 6331 / 268-461
0800-907-161(numéro vert)
Español:+49 (0) 6331 / 268-462
English: +49 (0) 6331 / 268-463
Italiano: +49 (0) 6331 / 268-464
Dutch: +49 (0) 6331 / 268-465
Fax: +49 (0) 6331 / 268-466
Tech Support Hours
7:30am - 6:00pm
Pacific Standard Time
Monday - Friday
Tech Support Hours
8:00am - 6:00pm
Middle European Time
Monday - Friday
Product Warranty Registration
Please take a moment to register your product online.
Go to TRENDnet’s website at http://www.trendnet.com
3135 Kashiwa Street
Torrance, CA 90505
USA
Copyright ©2006. All Rights Reserved. TRENDnet.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement