Cover Page TRENDnet User’s Guide

Cover Page TRENDnet User’s Guide
TRENDnet User’s Guide
Cover Page
TRENDnet User’s Guide
Table of Contents
Contents
Product Overview ................................................................................ 2
Package Contents .......................................................................................................... 2
Features ......................................................................................................................... 2
Product Hardware Features........................................................................................... 3
System Requirements .................................................................................................... 3
Application Diagram ...................................................................................................... 3
TU3-HDMI Display Mode ............................................................................................... 4
Using USB to HD TV Adapter in Windows ............................................. 5
Windows Software Installation...................................................................................... 5
Hardware Installation .................................................................................................... 6
General Settings ............................................................................................................ 7
Adapter Settings ............................................................................................................ 8
Using Multiple Adapters ................................................................................................ 9
Disconnecting the Adapter .......................................................................................... 10
Uninstalling the Adapter drivers and Software ........................................................... 10
Using USB to HD TV Adapter in Mac ................................................... 11
Mac Software Installation ............................................................................................ 11
Hardware Installation .................................................................................................. 12
General Setting ............................................................................................................ 13
Display Mode Setting ................................................................................................... 15
Using Multiple Adapters .............................................................................................. 17
Disconnecting the Adapter .......................................................................................... 18
Uninstall the Adapter drivers and Software ................................................................ 18
Troubleshooting ................................................................................. 19
© Copyright 2014 TRENDnet. All Rights Reserved.
i
TU3-HDMI
TRENDnet User’s Guide
Features
Product Overview
TRENDnet’s USB 3.0 to HD TV Adapter, model TU3-HDMI, adds a full HD 1080p monitor
to a workstation in Extend Mode or displays a computer screen on an HD TV in Mirror
Mode. Experience flawless video with the SuperSpeed USB 3.0 to HDMI connection. The
adapter is powered by the connected computer, 5.1 digital surround sound audio, and is
compatible with Windows® and Mac® operating systems.
Full HD 1080p
HDMI 1.3 supports full HD 1080p resolution (1920 x 1080) and resolutions up to 2048 x
1536
Extend Mode
Add a full HD 1080p monitor, with an available HDMI port, to a workstation in Extend
Mode
Mirror Mode
TU3-HDMI
See a 1080p computer display on an HD TV in Mirror Mode
Multiple Displays
Package Contents
Use up to 6 TU3-HDMI adapters to add 6 displays (requires 6 free USB ports on a
computer)
Surround Sound
In addition to your wireless adapter, the package includes:



CD-ROM (Utility & Drivers)
Multi-Language Quick Installation Guide
1 x USB 3.0 Micro-B cable (50 cm / 19.7 in.)
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.
Experience 5.1 digital surround sound audio
Flexible Connector
A 50 cm (20 in.) USB 3.0 cable provides installation flexibility
USB Port
Compatible with USB 3.0 and 2.0 ports
© Copyright 2014 TRENDnet. All Rights Reserved.
2
TU3-HDMI
TRENDnet User’s Guide
Product Hardware Features

System Requirement
o
Windows 8.1: Processor 1.2GHz or higher with SSE2 supported. RAM:
2GB
o
Windows 8/7/Vista: Processor 1.2GHz or higher with SSE2 supported.
RAM: 2GB
o
Windows XP: Processor 1.2GHz: single core CPU or higher. RAM: 1GB.
Application Diagram
USB 3.0 Micro-B Port
HDMI Port
(Connect to computer USB 3.0
port, USB 3.0 cable included)
(Connect to Display, HDMI
cable not included)
System Requirements

Windows 8.1 (32/64-bit), Windows 8 (32/64-bit),Windows 7 (32/64-bit), Vista
(32/64-bit), or XP (32-bit)

Mac OS X 10.9, 10.8, 10.7, 10.6*

Available USB 3.0 or 2.0 port (USB 3.0 recommended to ensure quality)

30MB of free disk space

CD-ROM Drive (Driver & Utility Installation with included CD)
* Available supported features on Mac system depends on chipset driver provided by
DisplayLink™.
The laptop is able to extend or mirror its display on to an HD monitor or TV by
connecting an available USB 3.0 port to the USB to HD TV adapter using the included
USB 3.0 cable and connecting an HDMI cable from the USB to HD TV adapter to the HD
monitor or TV.
© Copyright 2014 TRENDnet. All Rights Reserved.
3
TU3-HDMI
TRENDnet User’s Guide
TU3-HDMI Display Mode
There are 3 modes the USB to HD TV adapter can support.
Primary – Assigns the additional HD monitor or TV to be the primary display and your computer display as secondary.
Mirror – Mirrors the primary display on to the secondary HD monitor or TV.
Extend – Extends the desktop display of the primary display on to the secondary HD
monitor or TV.
© Copyright 2013 TRENDnet. All Rights Reserved.
4
TU3-HDMI
TRENDnet User’s Guide
Using USB to HD TV Adapter in Windows
3.
At the installation window, click I Accept to accept the license agreement.
4.
Please wait for the installation to complete. There is no message will be showed at
the end of the installation. When the installation window disappears from your task
bar, the software installation is complete.
This section describes how to install the software driver and utility for the USB to HD TV
Adapter.
Windows Software Installation
1.
Insert the included CD-ROM into your computer’s CD-ROM drive.
At the CD Autorun Prompt window, click Run Autorun.exe.
Note: If the Autorun prompt does not appear automatically, open the CD contents
and double click Autorun.exe.
Note: Your display may temporarily turn black or flash during the installation.
2.
At the CD-ROM main menu, click Install Driver & Utility.
© Copyright 2014 TRENDnet. All Rights Reserved.
5
TU3-HDMI
TRENDnet User’s Guide
Hardware Installation
2. Wait until computer finish the software configuration.
1. Connect the included USB 3.0 cable from an available USB 3.0 (or USB 2.0) port on
your computer to the USB 3.0 micro-B port on the adapter.
Note: Please check your computer documentation to verify which ports are
designated USB 3.0 ports or USB 2.0 ports. You can also easily identify the USB 3.0
ports with the blue color on the inside of the port or USB 3.0 symbol next to the port.
3. Connect an HDMI cable from the adapter HDMI port to the HD monitor or TV.
4.
Turn on your HD monitor or TV and make sure the input is set to the corresponding
HDMI input. Your installation is complete
© Copyright 2014 TRENDnet. All Rights Reserved.
6
TU3-HDMI
TRENDnet User’s Guide
General Settings
Upon completing the software installation, the task tray utility icon should appear in your desktop task tray at the bottom right-hand corner. The task tray utility icon will not be available
until your computer is connected to the USB to HD TV adapter. The general settings allow you to setup your video and audio configuration of your computer display and check for driver/
and utility updates.
Note: If you do not see the task tray utility icon, please check your USB connections.
Right-click the task tray utility icon to configure your adapter settings.
Check for updates… – Checks for utility/driver
updates for your USB to HD TV adapter.
DisplayLink Manager – Display the Display Manager
software version.
USB 3.0 to HDMI Adapter – Lists the USB to HD
Adapter display number and provides the
configuration options for the adapter or display. Up to
6 USB to HD Adapters can be connected to a single
computer.
Video Setup – Open to use your operating system’s
built-in display settings to set your computer’s
display resolution, orientation, and the multiple
displays.
Audio Setup – Open the built-in audio
configuration of your operating system. To
send the audio from your computer to your HD
monitor or TV using the USB to HD TV Adapter,
select the item DisplayLink Audio and click Set
Default, then click OK to apply the
configuration.
Multiple displays
Duplicate
Extend
Show on 1nd Monitor
Show on 2nd Monitor
© Copyright 2014 TRENDnet. All Rights Reserved.
7
TU3-HDMI
TRENDnet User’s Guide
Adapter Settings
The adapter settings allow you to configure the settings of your adapter and the HD monitor or TV display connected.
Screen Resolution – Allows you to select the screen resolution of the HD
monitor or TV. Please note that this option is not available in Mirror Mode
as the resolution is dependent on the settings of the primary display. The
available resolution options will be dependent on the capabilities of your
HD monitor or TV.
Screen Rotation – Allows you to rotate the screen orientation of the HD
monitor or TV. (Normal (default), Rotated Left, Rotated Right, UpsideDown)
Extend To – (Extend mode only) Allows you to select where to extend the
primary display on to the secondary HD monitor or TV. (Right (default),
Left, Above, or Below the primary display.)
Extend (Extend Mode default) – Sets the
adapter to Extend mode to extend your primary
computer display on to the HD monitor or TV.
Set as Main Monitor (Primary Mode) – Set the
HD monitor or TV to the primary display and
your computer display as secondary. By default,
your computer is set to the primary display.
Notebook Monitor Off – Turns off your
computer display only and leaves your HD
monitor or TV display on.
Off – Turns off/disables the adapter and
disconnects the connected HD monitor or TV.
Mirror (Mirror Mode) – Sets the adapter to
Mirror mode to mirror your primary
computer display to the HD monitor or TV.
Optimize for Video – Optimizes the video
quality for play back for the HD monitor or
TV. Please note that text may not appear as
clear or may not be as high quality when
selecting this option.
Fit to TV – Allows you to adjust the vertical
and horizontal size of the desktop displayed
on the HD monitor or TV.
© Copyright 2014 TRENDnet. All Rights Reserved.
8
TU3-HDMI
TRENDnet User’s Guide
Using Multiple Adapters
Up to 6 USB to HD TV adapters can be connected and used concurrently with one computer, each adapter connecting to an additional HD monitor or TV. To use multiple displays, simply
connect the additional adapters to your computer via USB and HDMI to the displays.
Additional adapters will be listed in
this section numbered 3, 4, 5, etc.
Minimum System Requirements for Multiple Adapters
Windwos 8.1

Processor: 1.2GHz or higher with supported SSE2

RMA: 1 display (2GB), 2 or more displays (4GB)
Windwos 8/7/Vista

Processor: 1.2GHz or higher with supported SSE2

RMA: 1 display (2GB), 2 or more displays (4GB)
Windwos XP

Processor: 1.2GHz Single Core CPU or higher

RMA: 1 display (1GB), 2 or more displays (2GB)
Note: Only the first USB to HD TV adapter connected may be able to use
extended mode and the others will be forced to mirror if using a computer
with hardware below the minimum system requirements.
© Copyright 2014 TRENDnet. All Rights Reserved.
9
TRENDnet User’s Guide
TU3-HDMI
Disconnecting the Adapter
You can simply disconnect the adapter by physically disconnecting the USB cable from your computer.
Uninstalling the Adapter drivers and Software
Windows 8.1/8
a. Click Windows key and X key from the keyboard, select Programs and Features.
b. Select the DisplayLink Core Software item in the list, click Uninstall and follow process to uninstall the software.
c. Select the DisplayLink Graphics item in the list, click Uninstall and follow the process to uninstall the software.
Windows 7
a. Go into the Control Panel, click Programs and Features.
b. Select the DisplayLink Core Software item in the list, click Uninstall and follow process to uninstall the software.
c. Select the DisplayLink Graphics item in the list, click Uninstall and follow the process to uninstall the software.
Windows Vista
a. Go into the Control Panel, click Programs and Features.
b. Select the DisplayLink Core Software item in the list, click Uninstall and follow process to uninstall the software.
c. Select the DisplayLink Graphics item in the list, click Uninstall and follow the process to uninstall the software.
Windows XP
a. Go into the Control Panel, double-click the Add or Remove Programs icon
b. Select the DisplayLink Core Software item in the list, click Remove and follow process to uninstall the software.
c. Select the DisplayLink Graphics item in the list, click Remove and follow the process to uninstall the software.
© Copyright 2014 TRENDnet. All Rights Reserved.
10
TU3-HDMI
TRENDnet User’s Guide
Using USB to HD TV Adapter in Mac
4.
Click Continue.
5.
Click Continue Installation.
Mac Software Installation
1.
Insert the included CD-ROM into your computer’s CD-ROM drive. Double click
TU3-HDMI disk icon.
2.
Navigate to Driver > Mac Driver , then click the DisplayLink_Mac_2.2.dmg
3.
Click DisplayLink Software Installer.pkg.
© Copyright 2014 TRENDnet. All Rights Reserved.
11
TU3-HDMI
TRENDnet User’s Guide
6.
Enter username and password on your Mac computer, then click Install Software.
Hardware Installation
1.
Connect the included USB 3.0 cable from an available USB 3.0 (or USB 2.0) port on
your computer to the USB 3.0 micro-B port on the adapter.
Note: Please check your computer documentation to verify which ports are
designated USB 3.0 ports or USB 2.0 ports. You can also easily identify the USB 3.0
ports with the blue color on the inside of the port or USB 3.0 symbol next to the port.
7.
Follow the screen to finish the installation and wait for the following screen
appears. Click Restart.
© Copyright 2014 TRENDnet. All Rights Reserved.
12
TU3-HDMI
TRENDnet User’s Guide
General Setting
2.
Connect an HDMI cable from the adapter HDMI port to the HD monitor or TV.
When attaching a display that the software has not seen before, the display will default to being
extended to the right of the primary display.
To configure the settings for each of your USB attached displays, click System Preference on
the duct .
Click Displays.
3.
Turn on your HD monitor or TV and make sure the input is set to the corresponding
HDMI input. Your installation is complete
© Copyright 2014 TRENDnet. All Rights Reserved.
13
TRENDnet User’s Guide
TU3-HDMI
General Setting Continue
Screen Resolution – Allows you to select the
screen resolution of the HD monitor or TV. The
available resolution options will be dependent
on the capabilities of your HD monitor or TV.
Rotation a Display – Allow you to rotate the
screen orientation of the HD monitor or TV
(standard (default), 90°, 180°, 270°). Any
changes made to the mode, resolution,
frequency or depth will be remembered for
next time user switch to that specify angle.
© Copyright 2014 TRENDnet. All Rights Reserved.
14
TRENDnet User’s Guide
TU3-HDMI
Display Mode Setting
Mirror (Mirror Mode) – Sets
the adapter to Mirror mode to
mirror your primary computer
display to the HD monitor or
TV.
Gather Windows – Allow
you to bring all the Display
Preference windows onto
the main display.
© Copyright 2014 TRENDnet. All Rights Reserved.
15
TU3-HDMI
TRENDnet User’s Guide
Display Mode Setting Continue
Set the Primary Monitor – Set the
HD monitor or TV to the primary
display and your computer display
as secondary. Click the white menu
bar and drag it to the desired HD
monitor or TV. By default, your
computer is set to the primary
display.
Extend (Extend Mode default) –
Sets the adapter to Extend
mode to extend your primary
computer display on to the HD
monitor or TV. Make sure the
Mirror Displays is unselected.
Using Both Mirror and Extend
Mode – To use both function, make
sure the Mirror Display selection is
off. In the Arrangement tab, press
and hold cmd and alt keys and drag
and drop the display you would like
to mirror over the primary display.
Repeat the same steps for more
displays.
For those unchanged
displays, it will remain in the extend
mode.
Extend position - Extend the primary
display on to the secondary HD
monitor or TV to right (default), left,
above, or below the primary display.
Extend to Right
Extend to Left
Extend to bottom
Extend to top
© Copyright 2014 TRENDnet. All Rights Reserved.
16
TRENDnet User’s Guide
TU3-HDMI
Using Multiple Adapters
Up to 4 USB to HD TV adapters can be connected and used concurrently with one computer, each adapter connecting to an additional HD monitor or TV. To use multiple displays, simply
connect the additional adapters to your computer via USB and HDMI to the displays.
* Available supported features on Mac system depends on chipset driver provided by DisplayLink™.
© Copyright 2014 TRENDnet. All Rights Reserved.
17
TRENDnet User’s Guide
TU3-HDMI
Disconnecting the Adapter
You can simply disconnect the adapter by physically disconnecting the USB cable from your computer.
Uninstall the Adapter drivers and Software
1.
Click Go > Applications then open the DisplayLink folder.
2.
Click DisplayLink Software Uninstaller to uninstall the software.
© Copyright 2014 TRENDnet. All Rights Reserved.
18
Troubleshooting
TRENDnet User’s Guide
Troubleshooting
I inserted the Utility & Driver CD-ROM into my computer's CD-ROM Drive and the
installation menu does not appear automatically. What should I do?
Answer:
1.
2.
3.
For Windows 8.1/ 8/7, if the installation menu does not appear automatically,
click on the Windows Icon on the bottom left hand corner of the screen,, click
the “Search programs and files” box, and type D:\Autorun.exe, where “D” in
“D:\Autorun.exe” is the letter assigned to your CD-ROM Drive, and then press
the ENTER key on your keyboard
For Windows Vista, if the installation menu does not appear automatically, click
Start, click the Start Search box, and type D:\Autorun.exe where "D" in
"D:\autorun.exe" is the letter assigned to your CD-ROM Drive, and then press
the ENTER key on your keyboard.
For Windows XP, if the installation menu does not appear automatically, click
Start, click Run, and type
D:\Autorun where "D" in "D:\Autorun.exe" is the letter assigned to your CDROM Drive, and then press the ENTER key on your keyboard.
The HD monitor or TV is blank.
Answer:
1. Verify that your USB and HDMI cable connections are secured and properly
connected.
2. Verify your computer is on and not in standby or hibernation mode. The
adapter will automatically disconnect and the HD monitor/TV will turn blank in
these modes.
3. Please ensure that the software and drivers are installed. You can find the
installation procedure on Page 3.
4. Verify that you have selected the correct HDMI input on your HD monitor or
TV.
5. 5.. Reboot your computer.
6. Connect the USB to HD TV Adapter to a different USB port on your computer.
7. If the HD monitor or TV power is on (typically, LED indicator is green), wait a
few moments for your HD monitor or TV to display video on the screen.
8. If the HD monitor or TV LED power is in standby (typically, LED indicator is red),
uninstall the drivers and software (Page 9), disconnect the adapter, and re-install
the drivers and software.
Windows is unable to recognize my hardware. What should I do?
Answer:
1.
2.
3.
4.
5.
Make sure your computer meets the minimum requirements.
Verify that the adapter is connected to a USB 3.0 port or USB 2.0 port (USB 3.0
recommended).
Please ensure that the software and drivers are installed. You can find the
installation procedure on page 3.
Try another USB
Connect the USB to HD TV Adapter to a different USB port on your computer.
The HD monitor or TV is flickering.
Answer:
The issue may be caused by a low refresh rate settings.
a. In Mirror mode, increase the refresh rate of the your primary computer
monitor which will increase the refresh rate of your HD monitor or TV.
b. In Extended mode, increase the refresh rate of the HD monitor or TV.
When playing MPEG files on Windows ® Media Player (WMP) in Extended mode, full
screen does not display correctly.
Answer:
If you are using Windows ® XP SP1, please upgrade to at least SP2.
When playing video in full screen mode, playback is not smooth.
Answer:
1.
2.
3.
4.
Reduce the resolution of your primary computer display to 680x480 or 800x600
screen resolution.
Use the adapter in Extended Mode.
Terminate any other CPU intensive applications running on your computer.
Some media players require DirectX hardware support to operate correctly.
Please try a different media player application.
© Copyright 2014 TRENDnet. All Rights Reserved.
19
Troubleshooting
TRENDnet User’s Guide
5.
6.
7.
In Extended Mode, drag the media player application playing the video to the
HD monitor or TV desktop display, then close and re-open the Media Player
application.
Try reducing the hardware acceleration of your primary computer display levels
on your computer to levels 1,2,or 3 and restarting the media player application.
The hardware acceleration settings can be found by right-clicking Desktop >
click Properties > Settings > Advanced > and Troubleshoot.
Video playback may not display correctly, if the primary display is mirrored on
to the HD monitor and TV display and there is another monitor extending the
display on to the HD monitor and TV display at the same time. The extension
mode must be disabled.
In Extended Mode, the HD monitor or TV has a black border around the desktop.
Answer:
This occurs when the screen resolution used by the HD monitor or TV is higher. To
resolve this issue, configure the HD monitor or TV to use the same resolution as the
primary computer display.
No playback on screen when attempting to play protected media files.
Answer:
Some protected videos cannot be played back when connecting to an HDMI ® TV or
monitor.
Full screen menus may not display correctly or lose quality.
Answer:
This may occur when the computer does not have enough memory to render the
screen in full quality.
This may also occur when using the Optimize for Video option in the adapter task
tray utility. You can try the following resolve the issue.
 Disable the Optimize for Video option.
 Close any unnecessary programs, especially applications that are CPU intensive.
 If using a laptop, set the computer power plan/options to High Performance (or
highest available power plan) to ensure the computer does not go into a low
power or power saving mode.
Only the first adapter can be configured to extend mode and the other adapters are
forced to mirror mode.
Answer:
This may occur if the computer does not meet the minimum system requirements
or there is too much CPU utilization used by other applications which will limit the
usage capabilities of the adapters. Please ensure your computer meets the
minimum system requirements according to the number of adapters you are using
and make sure that all applications that require a lot of CPU utilization are closed.
Hardware acceleration was not working properly.
Answer:
Hardware acceleration may not be available for the following applications.
Windows® 8.1 / 8 / 7 / Vista
Interface
Windows® XP
DX10
Yes, if supported by the primary graphics
card.
No
DX9
Yes, but not in full screen, windowed only
No
Yes, if supported by the primary graphics
card.
No
DxVA
Direct3D
Yes, but not if the TU3-HDMI screen is set
to primary
No
DirectDraw
Yes
Yes
OpenGL
Yes, but not in full screen, windowed only
No
TU3-HDMI is not working properly on Mac System.
Answer:
Available features on Mac system are provided by DisplayLink™ device driver. For
latest device driver and supported features, please visit
http://www.displaylink.com/mac .
© Copyright 2014 TRENDnet. All Rights Reserved.
20
Limited Warranty
TRENDnet User’s Guide
Limited Warranty
OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE,
INSTALLATION MAINTENANCE OR USE OF TRENDNET’S PRODUCTS.
TRENDnet warrants its products against defects in material and workmanship, under normal
use and service, for the following lengths of time from the date of purchase.
TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION
DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY
CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT, IMPROPER INSTALLATION OR
TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE
BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER
HAZARD.
TU3-HDMI – 2 Years Limited Warranty
AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty.
If a product does not operate as warranted during the applicable warranty period, TRENDnet
shall reserve the right, at its expense, to repair or replace the defective product or part and
deliver an equivalent product or part to the customer. The repair/replacement unit’s
warranty continues from the original date of purchase. All products that are replaced
become the property of TRENDnet. Replacement products may be new or reconditioned.
TRENDnet does not issue refunds or credit. Please contact the point-of-purchase for their
return policies.
TRENDnet shall not be responsible for any software, firmware, information, or memory data
of customer contained in, stored on, or integrated with any products returned to TRENDnet
pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to service
the product by any unauthorized service center. This warranty is voided if (i) the product has
been modified or repaired by any unauthorized service center, (ii) the product was subject to
accident, abuse, or improper use (iii) the product was subject to conditions more severe than
those specified in the manual.
Warranty service may be obtained by contacting TRENDnet within the applicable warranty
period and providing a copy of the dated proof of the purchase. Upon proper submission of
required documentation a Return Material Authorization (RMA) number will be issued. An
RMA number is required in order to initiate warranty service support for all TRENDnet
products. Products that are sent to TRENDnet for RMA service must have the RMA number
marked on the outside of return packages and sent to TRENDnet prepaid, insured and
packaged appropriately for safe shipment. Customers shipping from outside of the USA and
Canada are responsible for return shipping fees. Customers shipping from outside of the USA
are responsible for custom charges, including but not limited to, duty, tax, and other fees.
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS WARRANTED
ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT TRENDNET’S OPTION, REPAIR OR
REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF
ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF
LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO
EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR
TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR
PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF
BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR
IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE,
FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS
LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT
TRENDNET’S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED
IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of the state of
California.
Some TRENDnet products include software code written by third party developers. These
codes are subject to the GNU General Public License ("GPL") or GNU Lesser General Public
License ("LGPL").
Go to http://www.trendnet.com/gpl or http://www.trendnet.com Download section and
look for the desired TRENDnet product to access to the GPL Code or LGPL Code. These codes
are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers.
TRENDnet does not provide technical support for these codes. Please go to
http://www.gnu.org/licenses/gpl.txt or http://www.gnu.org/licenses/lgpl.txt for specific
terms of each license.
PWP05202009v2
V2.0R (09/15/2014)
© Copyright 2014 TRENDnet. All Rights Reserved.
21
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement