HP LP1965 19-inch LCD Monitor, LP2465 24-inch Widescreen LCD Monitor User guide

HP LP1965 19-inch LCD Monitor, LP2465 24-inch Widescreen LCD Monitor User guide

HP LP1965 19", LP2065 20", and LP2465 24"

LCD Monitors

User Guide

© 2005–2008 Hewlett-Packard

Development Company, L.P.

Microsoft, Windows, and the Windows logo are trademarks of Microsoft Corporation in the U.S. and other countries.

All other product names mentioned herein may be trademarks of their respective companies.

Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. The information in this document is provided “as is” without warranty of any kind, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, and is subject to change without notice. The warranties for

Hewlett-Packard products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty.

This document contains proprietary information that is protected by copyright. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of

Hewlett-Packard Company.

Fourth Edition (May 2008)

Document Part Number: 397376-004

About This Guide

This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications.

WARNING!

Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life.

CAUTION:

Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information.

NOTE:

Text set off in this manner provides important supplemental information.

ENWW iii

iv About This Guide ENWW

Table of contents

1 Product Features

HP LP1965, LP2065, and LP2465 Models ........................................................................................... 1

2 Safety and Maintenance Guidelines

Important Safety Information ................................................................................................................ 3

Maintenance Guidelines ....................................................................................................................... 4

Cleaning the Monitor ............................................................................................................ 4

Shipping the Monitor ............................................................................................................ 4

3 Setting Up the Monitor

Installing the Monitor Pedestal Base .................................................................................................... 5

Rear Components ................................................................................................................................ 6

Selecting the Signal Connectors and Cables ....................................................................................... 7

Connecting the Monitor ........................................................................................................................ 8

Adjusting the Monitor ............................................................................................................................ 9

Turning on the Monitor ....................................................................................................................... 11

Connecting USB Devices ................................................................................................................... 12

Using the Accessory Rails .................................................................................................................. 13

Removing the Monitor Pedestal Base ................................................................................................ 13

Mounting the Monitor ......................................................................................................... 14

Locating the Rating Labels ................................................................................................................. 16

4 Operating the Monitor

Software and Utilities .......................................................................................................................... 17

The Information File ........................................................................................................... 17

The Image Color Matching File .......................................................................................... 17

Installing the .INF and .ICM Files ....................................................................................................... 18

Installing from the CD ........................................................................................................ 18

Downloading from the Worldwide Web .............................................................................. 18

Using the Auto-Adjustment Function .................................................................................................. 19

Front Panel Controls .......................................................................................................................... 20

Adjusting the Monitor Settings ............................................................................................................ 21

Using the On-Screen Display Menu .................................................................................. 21

OSD Menu Selections ....................................................................................... 21

ENWW v

Optimizing Digital Conversion ........................................................................... 25

Using the HP Display Assistant Utility ............................................................................... 25

Identifying Monitor Conditions ............................................................................................................ 26

Sleep Timer Mode .............................................................................................................................. 26

HP Display LiteSaver ......................................................................................................................... 27

Installing the HP Display LiteSaver Software .................................................................... 27

sRGB Support .................................................................................................................................... 28

Changing the Color Temperature ...................................................................................... 28

Installing the sRGB ICM File for Microsoft Windows 2000 and Windows XP .................... 28

Appendix A Troubleshooting

Solving Common Problems ................................................................................................................ 30

Using the Worldwide Web .................................................................................................................. 31

Preparing to Call Technical Support ................................................................................................... 31

Appendix B Technical Specifications

LP1965 Model .................................................................................................................................... 32

LP2065 Model .................................................................................................................................... 33

LP2465 Model .................................................................................................................................... 34

Recognizing Preset Display Resolutions ............................................................................................ 35

Entering User Modes .......................................................................................................................... 37

Energy Saver Feature ........................................................................................................................ 37

Appendix C Agency Regulatory Notices

Federal Communications Commission Notice ................................................................................... 38

Modifications ...................................................................................................................... 38

Cables ................................................................................................................................ 38

Declaration of Conformity for Products Marked with the FCC Logo (United States Only) ................. 38

Canadian Notice ................................................................................................................................. 39

Avis Canadien .................................................................................................................................... 39

European Union Regulatory Notice .................................................................................................... 39

German Ergonomics Notice ............................................................................................................... 40

Japanese Notice ................................................................................................................................. 40

Korean Notice ..................................................................................................................................... 40

Power Cord Set Requirements ........................................................................................................... 40

Japanese Power Cord Requirements ................................................................................ 40

Product Environmental Notices .......................................................................................................... 41

Materials Disposal ............................................................................................................. 41

Disposal of Waste Equipment by Users in Private Household in the European

Union ................................................................................................................................. 41

Chemical Substances ........................................................................................................ 41

Restriction of Hazardous Substances (RoHS) ................................................................... 41

vi ENWW

Appendix D LCD Monitor Quality and Pixel Policy

ENWW vii

viii ENWW

1 Product Features

HP LP1965, LP2065, and LP2465 Models

The flat panel monitors have an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include:

● LP1965 model, large 19-inch (48.3 cm) viewable area display with 1280 × 1024 resolution, plus full-screen support for lower resolutions

LP2065 model, large 20.1-inch (51 cm) viewable area display with 1600 × 1200 resolution, plus full-screen support for lower resolutions

LP2465 model, large 24-inch (61 cm) viewable area display with 1920 × 1200 resolution, plus fullscreen support for lower resolutions

Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side

Pivot capability to rotate display to portrait mode

Tilt, swivel, and height adjustment capabilities

● Removable stand with quick release mechanism and VESA 100 mm mounting holes for flexible mounting solutions

Video inputs support DVI analog and digital signal inputs

● Two DVI-I to VGA signal cables and two DVI-D signal cables included (LP2065 and LP2465 models)

One DVI-I to VGA signal cable and one DVI-D signal cable included (LP1965 model only)

● USB 2.0 hub with one upstream (connects to the computer) and four downstream (connects to

USB devices) ports

USB cable included to connect the monitor's USB hub to the USB connector on the computer

● Accessory rail on monitor to accept optional mounted devices, such as an HP speaker bar

Plug and play capability if supported by the system.

On-Screen Display (OSD) adjustments in English, Dutch, French, German, Italian, Japanese, and

Spanish for ease of setup and screen optimization

Software and documentation CD that includes HP Display Assistant, Pivot Pro software, monitor driver software, and product documentation

● Energy saver feature to meet requirements for reduced power consumption

ENWW HP LP1965, LP2065, and LP2465 Models 1

AssetControl

● Compliant with the following regulated specifications:

European Union CE Directives

Swedish MPR II 1990

Swedish TCO Requirements

2 Chapter 1 Product Features ENWW

2 Safety and Maintenance Guidelines

Important Safety Information

A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the

monitor, refer to the Power Cord Set Requirements on page 40

section in Appendix C.

WARNING!

To reduce the risk of electric shock or damage to the equipment:

• Do not disable the power cord grounding feature. The grounding plug is an important safety feature.

• Plug the power cord in a grounded (earth) outlet that is easily accessible at all times.

• Disconnect power from the product by unplugging the power cord from the electrical outlet.

For your safety, do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp the cord by the plug.

To reduce the risk of serious injury, read the Safety and Comfort Guide. It describes proper workstation, setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo and/or on the documentation CD, if one is included with the monitor.

CAUTION:

For the protection of the monitor, as well as the computer, connect all power cords for the computer and its peripheral devices (such as a monitor, printer, scanner) to some form of surge protection device such as a power strip or Uninterruptible Power Supply (UPS). Not all power strips provide surge protection; the power strips must be specifically labeled as having this ability. Use a power strip whose manufacturer offers a Damage Replacement Policy so you can replace the equipment, if surge protection fails.

ENWW Important Safety Information 3

Maintenance Guidelines

To enhance the performance and extend the life of the monitor:

Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those controls that are covered in the operating instructions. If the monitor is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider.

● Use only a power source and connection appropriate for this monitor, as indicated on the label/ back plate of the monitor.

Be sure the total ampere rating of the products connected to the outlet does not exceed the current rating of the electrical outlet, and the total ampere rating of the products connected to the cord does not exceed the rating of the cord. Look on the power label to determine the ampere rating (AMPS or A) for each device.

● Install the monitor near an outlet that you can easily reach. Disconnect the monitor by grasping the plug firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord.

Turn the monitor off when not in use. You can substantially increase the life expectancy of the monitor by using a screen saver program and turning off the monitor when not in use.

Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered. Never push objects of any kind into cabinet slots or other openings.

Do not drop the monitor or place it on an unstable surface.

Do not allow anything to rest on the power cord. Do not walk on the cord.

Keep the monitor in a well-ventilated area, away from excessive light, heat or moisture.

● When removing the monitor base, you must lay the monitor face down on a soft area to prevent it from getting scratched, defaced, or broken.

Cleaning the Monitor

1.

Turn off the monitor and the computer.

2.

Unplug the monitor from the wall outlet.

3.

Clean the monitor plastics with a clean cloth dampened with water.

4.

Clean the monitor screen with an antistatic screen cleaner.

CAUTION:

Do not use benzene, thinner, ammonia, or any other volatile substances to clean the monitor or the screen. These chemicals may damage the cabinet finish as well as the screen.

Shipping the Monitor

Keep the original packing box in a storage area. You may need it later if you move or ship the monitor.

4 Chapter 2 Safety and Maintenance Guidelines ENWW

3 Setting Up the Monitor

To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below.

NOTE:

Be sure the master power switch, located on the rear panel of the monitor, is in the off position.

The master power switch turns off all power to the monitor.

Installing the Monitor Pedestal Base

NOTE:

Do not install the pedestal base if the monitor will be used on a wall, swing arm, or other mounting fixture; instead see the section on

Mounting the Monitor on page 14

in this chapter.

1.

Using both hands, position the monitor over the pedestal base.

CAUTION:

Do not touch the surface of the LCD panel. Pressure on the panel may cause nonuniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover to its normal condition.

2.

Press down firmly on the monitor to lock the pedestal base in place. When the base locks, it will make a clicking sound.

Figure 3-1

Inserting the Monitor into the Pedestal Base

ENWW

NOTE:

Be sure the pedestal base is securely locked before continuing with the setup.

Installing the Monitor Pedestal Base 5

Rear Components

Figure 3-2

Rear Components

6

7

Component

1

2

3

4

5

Cable Lock Provision

Master Power Switch

AC Power Connector

DVI-I Connectors

Function

Provides slot for use with cable security locks.

Turns off all power to the monitor.

Connects the AC power cord to the monitor.

Connects the DVI-I to VGA signal cable or DVI-D signal cable to the monitor.

Connects the monitor USB hub to a host USB port/hub.

USB Upstream

Connector

USB Downstream

Connectors

USB Downstream

Connectors (side panel)

Connects optional USB devices to the monitor.

Connects optional USB devices to the monitor.

6 Chapter 3 Setting Up the Monitor ENWW

Selecting the Signal Connectors and Cables

The monitor features two DVI-I connectors capable of supporting either analog or digital input.

The video mode supported by the DVI-I connector is determined by the video cable used.

For digital operation, use the DVI-D signal cable provided. Connect the DVI-D signal cable to a

DVI-I connector on the monitor and the other end to the DVI connector on the computer.

For analog operation, use the DVI-I to VGA signal cable provided. Connect the DVI-I to VGA signal cable to a DVI-I connector on the monitor and the other end to the VGA connector on the computer.

The monitor will automatically determine which inputs have valid video signals. The inputs can be selected through the On-Screen Display (OSD) feature by pressing the Input Select button on the front panel.

Figure 3-3

Connecting the DVI-I to VGA Signal Cable

Figure 3-4

Connecting the DVI-D Signal Cable

ENWW Selecting the Signal Connectors and Cables 7

Connecting the Monitor

1.

Place the monitor in a convenient, well-ventilated location near the computer.

2.

Connect one end of the USB hub cable to the USB connector on the rear panel of the computer, and the other end to the upstream USB connector on the monitor.

Figure 3-5

Connecting the USB Cable

WARNING!

To reduce the risk of electric shock or damage to the equipment:

• Do not disable the power cord grounding plug. The grounding plug is an important safety feature.

• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.

• Disconnect power from the equipment by unplugging the power cord from the electrical outlet.

For your safety, do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp the cord by the plug.

3.

Connect one end of the power cable to the AC power connector on the back of the monitor, and the other end to an electrical wall outlet.

Figure 3-6

Connecting the Power Cable

8 Chapter 3 Setting Up the Monitor ENWW

4.

Place the cables through the cable management channel on the back of the monitor base.

Figure 3-7

Using the Cable Management Feature

Adjusting the Monitor

1.

Tilt the monitor's panel forward or backward to set it to a comfortable eye level.

Figure 3-8

Tilting the Monitor

NOTE:

The 24" model has a tilt range of -5 to +25 degrees.

ENWW Adjusting the Monitor 9

2.

Swivel the monitor to the left or right for the best viewing angle.

Figure 3-9

Swiveling the Monitor

3.

Adjust the monitor's height so that it is parallel to your eye height for a comfortable viewing position.

WARNING!

A lock-down/release button on the front of the column prevents the display head of the 19" model from sliding up when the monitor is lifted. If the display head is locked in the lowest height position: a. Make sure that the monitor is safely positioned on a stable surface.

b. Gently push down on the display head.

c. While pushing down the display head, press the lock-down/release button on the front of the column.

d. Guide the display head up to the desired height.

Figure 3-10

Adjusting the Height (LP2065 and LP2465 models)

NOTE:

The 19" model has a height adjustment range of 100 mm.

10 Chapter 3 Setting Up the Monitor ENWW

4.

Pivot the monitor from landscape to portrait orientation viewing to adapt to your application.

Figure 3-11

Pivoting the Monitor

NOTE:

The 20" model (shown above) pivots counter-clockwise; the 19" and 24" models pivot clockwise.

To view information on the screen in portrait mode, you will need to install the Pivot Pro software included on the software and documentation CD.

Turning on the Monitor

1.

Press the power switch to turn on the computer.

2.

Press the master power switch on the rear of the monitor.

3.

Press the power button on the front of the monitor.

CAUTION:

Burn-in image damage may occur on monitors that display the same static image on screen for a prolonged period of time.* To avoid burn-in image damage on the monitor screen, you should always activate a screen saver application or turn off the monitor when it is not in use for a prolonged period of time. Image retention is a condition that may occur on all LCD screens.

* A prolonged period of time is 12 consecutive hours of non-use.

ENWW Turning on the Monitor 11

Connecting USB Devices

The monitor provides four USB connectors, two on the side panel and two on the rear panel, used to connect devices such as a digital camera, USB keyboard, or USB mouse.

NOTE:

You must connect the USB hub cable from the monitor to the computer to enable the USB 2.0

ports on the monitor. Refer to Step 2 in Connecting the Monitor on page 8 .

Figure 3-12

Connecting USB Devices

12 Chapter 3 Setting Up the Monitor ENWW

Using the Accessory Rails

The monitor features accessory rails on the rear that may be used to mount optional devices, such as the HP speaker bar, to attach to the LCD. Refer to the documentation included with the optional device for detailed mounting instructions.

Figure 3-13

Using the Accessory Rails Feature

Removing the Monitor Pedestal Base

You can remove the monitor panel from the pedestal base to mount the panel on a wall, a swing arm, or other mounting fixture.

This monitor has a Quick Release mechanism that allows you to easily remove and replace the monitor panel to the pedestal base.

CAUTION:

Before beginning to disassemble the monitor, be sure the monitor is turned off and the power and signal cables are both disconnected. If the monitor has a connected audio cable, disconnect it.

1.

Disconnect and remove the signal and power cables from the back of the monitor.

2.

Slide the quick release latch (1) on the pedestal base to the side (either right or left).

ENWW Using the Accessory Rails 13

3.

Pull up on the monitor display head (2) to remove it from the base.

Figure 3-14

Removing the Monitor from the Pedestal Base

Mounting the Monitor

The HP Quick Release can be removed from the pedestal base and installed to a mounting fixture. It allows you to quickly and securely attach the monitor panel to the mounting fixture.

1.

Remove the monitor panel from the pedestal base. Refer to

Removing the Monitor Pedestal

Base on page 13 steps in the previous section.

CAUTION:

This monitor supports the VESA industry standard 100 mm mounting holes. To attach a third-party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm long screws are required (not provided with the monitor). Longer screws should not be used because they may damage the monitor. It is important to verify that the manufacturer’s mounting solution is compliant with the VESA standard and is rated to support the weight of the monitor display panel. For best performance, it is important to use the power and video cables provided with the monitor.

2.

Remove the Quick Release from the pedestal base by removing the four screws.

Figure 3-15

Removing the HP Quick Release from the Pedestal Base

14 Chapter 3 Setting Up the Monitor ENWW

3.

Mount the Quick Release to a swing arm or other mounting fixture using the four screws removed from the Quick Release in the previous step.

Figure 3-16

Installing the Quick Release

CAUTION:

The Quick Release can also be installed directly to a wall to mount the monitor panel.

It is designed to support a maximum of up to 24 lbs. (10.9 kg). If you are mounting to a wall, HP recommends that you consult with a qualified engineering, architectural, or construction professional to determine the appropriate type and quantity of mounting fasteners required for your application and to ensure that the mounting solution is properly installed to support applied loads.

4.

Insert the monitor panel into the Quick Release, and then press down firmly on the monitor to lock it in place. When the Quick Release locks, it will make a clicking sound.

Figure 3-17

Inserting the Monitor Panel into the Quick Release

ENWW Removing the Monitor Pedestal Base 15

Locating the Rating Labels

The rating labels on the monitor provide the spare part number, product number, and serial number.

You may need these numbers when contacting HP about the monitor model. The rating labels are located on the rear panel of the monitor display head.

Figure 3-18

Locating the Rating Labels

16 Chapter 3 Setting Up the Monitor ENWW

4 Operating the Monitor

Software and Utilities

The CD that comes with the monitor contains files you can install on the computer:

● an .INF (Information) file

● an .ICM (Image Color Matching) file

● auto-adjustment pattern utility

● additional software for the monitor model

Adobe Reader is supplied on this CD and can be installed from the menu.

NOTE:

If the monitor does not include a CD, the .INF and .ICM files can be downloaded from the HP

monitors support Web site. See Downloading from the Worldwide Web on page 18 in this chapter.

The Information File

The .INF file defines monitor resources used by Microsoft Windows operating systems to ensure monitor compatibility with the computer’s graphics adapter.

This monitor is Microsoft Windows Plug and Play compatible and the monitor will work correctly without installing the .INF file. Monitor Plug and Play compatibility requires that the computer’s graphic card is

VESA DDC2–compliant and that the monitor connects directly to the graphics card. Plug and Play does not work through separate BNC type connectors or through distribution buffers/boxes.

The Image Color Matching File

The .ICM files are data files that are used in conjunction with graphics programs to provide consistent color matching from monitor screen to printer, or from scanner to monitor screen. The .ICM file contains a monitor color system profile. This file is activated from within graphics programs that support this feature.

NOTE:

The ICM color profile is written in accordance with the International Color Consortium (ICC)

Profile Format specification.

ENWW Software and Utilities 17

Installing the .INF and .ICM Files

After you determine that you need to update, you can install the .INF and .ICM files from the CD or download them.

Installing from the CD

To install the .INF and .ICM files on the computer from the CD:

1.

Insert the CD in the computer CD-ROM drive. The CD menu is displayed.

2.

View the Monitor Driver Software Readme file.

3.

Select Install Monitor Driver Software.

4.

Follow the on-screen instructions.

5.

After the software has been installed, restart Windows.

6.

Ensure that the proper resolution and refresh rates appear in the Windows Display control panel.

NOTE:

You may need to install the digitally signed monitor .INF and .ICM files manually from the CD in the event of an installation error. Refer to the Monitor Driver Software Readme file on the CD.

Downloading from the Worldwide Web

To download the latest version of .INF and .ICM files from the HP monitors support Web site:

1.

Refer to http://www.hp.com/support and select the country region.

2.

Follow the links for the monitor to the support page and download page.

3.

Ensure the system meets the requirements.

4.

Download the software by following the instructions.

18 Chapter 4 Operating the Monitor ENWW

Using the Auto-Adjustment Function

You can optimize the screen performance for the VGA (analog) input by using the -/Auto button on the monitor and the auto-adjustment pattern software utility on the CD provided.

Do not use this procedure if the monitor is using a DVI input. If the monitor is using a VGA (analog) input, this procedure can correct the following image quality conditions:

● Fuzzy or unclear focus

Ghosting, streaking or shadowing effects

Faint vertical bars

Thin, horizontal scrolling lines

An off-center picture

To use the auto-adjustment feature:

1.

Allow the monitor to warm up for 20 minutes before adjusting.

2.

Press the -/Auto button on the monitor front panel.

You can also press the Menu/Select button, then select Auto-Adjustment from the OSD Main

Menu. Refer to

Adjusting the Monitor Settings on page 21 in this chapter.

If the result is not satisfactory, continue with the procedure.

3.

Insert the CD in the disc drive. The CD menu is displayed.

4.

Select Open Auto-Adjustment Software . The setup test pattern is displayed.

5.

Press the -/Auto button on the monitor front panel to produce a stable, centered image.

6.

Press the ESC key or any other key on the keyboard to exit the test pattern.

ENWW Using the Auto-Adjustment Function 19

Front Panel Controls

Table 4-1 Monitor Front Panel Controls

Control Function

1

2

Menu/Select

– (Minus)/Auto

3

4

5

6

+ (Plus)

Input Select

Power LED

Power

Opens, selects or exits the OSD menu.

Navigates backward through the OSD menu and decreases adjustment levels.

● When the OSD menu is inactive, activates the auto adjustment feature to optimize the screen image.

Navigates forward through the OSD menu and increases adjustment levels.

Selects the video input (DVI-I #1 or DVI-I #2).

Fully powered = Green.

Sleep mode = Amber.

Sleep Timer mode = Flashing Amber.

Turns the monitor on or off.

20 Chapter 4 Operating the Monitor ENWW

Adjusting the Monitor Settings

The monitor settings can be adjusted from the On-Screen Display (OSD) menu or from the HP Display

Assistant utility.

Using the On-Screen Display Menu

Use the On-Screen Display (OSD) to adjust the screen image based on your viewing preferences. To access the OSD, do the following:

1.

If the monitor is not already on, press the Power button to turn on the monitor.

2.

To access the OSD Menu, press the Menu/Select button on the monitor’s front panel.

3.

To navigate through the OSD Menu, press the + (Plus) button on the monitor’s front panel to scroll up, or the – (Minus)/Auto button to scroll in reverse.

4.

To select an item from the OSD Menu, use the + or – buttons to scroll to and highlight your selection, then press the Menu/Select button to select that function.

5.

Adjust the item using the + or – buttons on the front panel to adjust the scale.

6.

After adjusting the function, select Save and Return, or Cancel if you don’t want to save the setting, then select Exit from the Main Menu.

NOTE:

If the buttons remain untouched for 10 seconds while displaying a menu, new adjustments will be discarded and the settings will revert to previous settings and exit the menu.

OSD Menu Selections

The following table lists the On-Screen Display (OSD) menu selections and their functional descriptions.

After changing an OSD menu item, and if the menu screen has these options, you may choose to:

Cancel—to return to the previous menu level.

Save and Return—to save all changes and return to the OSD Main Menu screen. This Save and

Return option is only active if you change a menu item.

Reset—to change back to the previous setting.

ENWW Adjusting the Monitor Settings 21

Table 4-2 OSD Menu

Icon Main Menu

Brightness

Contrast

Image Control

Color

Language

Submenu

Adjustable scale

Description

Adjusts the brightness level of the screen. The factory default range is 50 or 90, depending on the model.

Adjusts the contrast level of the screen. The factory default range is 80.

Adjusts the screen image.

Auto Adjustment

Horizontal Position

Automatically adjusts the screen image.

Adjusts the position of the screen image left and right.

Vertical Position Adjusts the position of the screen image up and down.

Custom Scaling (not available on LP1965 model)

Sharpness (not available on LP1965 model)

Adjusts the screen image to look sharper or soft.

NOTE:

If the one-to-one custom scaling menu is selected, scaling is disabled and the sharpness feature will also be disabled.

Clock

One-to-one—disables video scaling, displays an image that is smaller in size than the monitor’s capability and centers the image on the screen in the active viewing area

Minimizes any vertical bars or strips visible on the screen background. Adjusting the Clock will also change the horizontal screen image.

Clock Phase

Selects the method on how displayed information on the monitor will be formatted. Select:

Fill to Screen—image fills the entire screen and may look distorted or elongated because of non-proportional scaling of height and width

● Fill to Aspect Ratio—image is sized to fit the screen and maintains proportional image

9300 K

6500 K

Custom Color

Adjusts the focus of the display. This adjustment allows you to remove any horizontal noise and clear or sharpen the image of characters.

Selects the screen color. The factory default is 6500K or Custom

Color, depending on the model.

Changes to slightly blueish white.

Changes to slightly reddish white.

Selects and adjusts your own color scales:

● R—sets your own red color levels

G—sets your own green color levels sRGB

● B—sets your own blue color levels

Sets your screen colors to adapt to the color standards used in the image technology industry.

Selects the language in which the OSD menu is displayed. The factory default is English.

22 Chapter 4 Operating the Monitor ENWW

ENWW

Table 4-2 OSD Menu (continued)

Icon Main Menu

Management

Submenu

Power Saver

Power On Recall

Mode Display

Power-On Status

Display

DDC/CI Support

Sleep Timer

Description

Selects the power management features of the monitor.

Enables the power saving feature. Select:

On

● Off

The factory default is On.

Restores power to the monitor following an unexpected removal of power. Select:

● On

Off

The factory default is On.

Displays the resolution, refresh rate and frequency information on the screen each time the OSD Main Menu is accessed. Select:

● On

Off

The factory default is On or Off, depending on the model.

Displays the operating status of the monitor each time the monitor is powered on. Select the location to display the status to:

Top

● Middle

Bottom

● Off

The factory default is On or Off, depending on the model.

Allows the computer to control some OSD menu features such as brightness, contrast and color temperature. Set to:

On

● Off

The factory default is On.

Provides the timer adjustment menu options:

● Set Current Time—sets the current time in hours and minutes

Set Sleep Time—sets the time you want to place the monitor in sleep mode

● Set on Time—sets the time you want the monitor to wake up from sleep mode

Timer—sets the Sleep Timer feature On or Off. The default setting is Off

● Sleep Now—immediately sets the monitor to enter sleep mode

Adjusting the Monitor Settings 23

Table 4-2 OSD Menu (continued)

Icon Main Menu

OSD Control

Information

Video Input

Control

Factory Reset

Exit

Submenu

Horizontal Position

Vertical Position

OSD Timeout

OSD Transparency

Description

Adjusts the position of the OSD menu on the screen.

Changes the viewing position of the OSD menu to the left or right area of the screen. The factory default range is 50.

Changes the viewing position of the OSD menu to the top or bottom area of the screen. The factory default range is 50.

Sets the time duration in seconds that the OSD is visible after the last button is pressed. The factory default is 30 seconds.

Adjust to view the background information through the OSD.

Selects and displays important information about the monitor.

Current Settings Provides the current input video mode.

Recommended Settings Provides the recommended resolution mode and refresh rate for the monitor.

Serial Number

Version

Backlight hours

Reports the serial number of the monitor. The serial number is needed if contacting HP technical support.

Reports the firmware version of the monitor.

Reports the total hours of backlight operation.

DVI-I#1

DVI–I#2

Selects the default or primary video input signal when the monitor is connected to two active and valid video sources. The monitor will automatically determine the video format. The default input selection is DVI.

Selects DVI-I 1 input. This input accepts either analog or digital signals.

Selects DVI-I 2 input. This input accepts either analog or digital signals.

Disable Input Auto-

Switching

Enable Input Auto-

Switching

Keeps the monitor's video input selection at it's current setting.

This menu selection is visible if the video input control is set to

Enable Input Auto-switching.

Automatically returns the monitor's video input to the default autoswitching mode. This menu selection is visible if the video input control is set to Disable Input Auto-switching.

Returns all OSD menu settings and Power-On Status Display (for

LP2465 model) settings to the factory default setting, except the

Language and Power-On Status Display (for LP1965 and LP2065 models) settings.

Exits the OSD menu screen.

24 Chapter 4 Operating the Monitor ENWW

Optimizing Digital Conversion

This monitor contains advanced circuitry that allows the flat panel screen to function like a standard monitor. Two controls in the on-screen display can be adjusted to improve image performance: Clock and Clock Phase.

NOTE:

The Clock and Clock Phase controls are adjustable only when using an analog input. These controls are not adjustable for digital inputs.

The Clock must first be set correctly since the Clock Phase settings are dependent on the main Clock setting. Use these controls only when the auto-adjustment function does not provide a satisfactory image.

Clock—Increases/decreases the value to minimize any vertical bars or stripes visible on the screen background.

Clock Phase—Increases/decreases the value to minimize video distortion or video jitter.

NOTE:

When using the controls, you will obtain the best results by using the auto-adjustment pattern software utility provided on the CD.

When adjusting the Clock and Clock Phase values, if the monitor images become distorted, continue adjusting the values until the distortion disappears. To restore the factory settings, select Yes from the

Factory Reset menu in the on-screen display.

Using the HP Display Assistant Utility

HP Display Assistant, included on the software and documentation CD, is a software utility that guides you through the tuning process with easy to understand instructions and background patterns designed for each monitor control. It provides:

Accurate screen calibration through the use of step-by-step instruction Wizards to obtain the best overall image quality.

Software control of the monitor image and color settings to eliminate dependence on the monitor’s front panel buttons and On-Screen Display (OSD) menu.

Defined preset display settings for each individual user in a multi-user environment.

Multiple preset display settings for a single user based on content and ambient lighting.

Asset Management and Power Management capabilities that include remote control for individual or a group of displays on the domain from a centralized console application.

The HP Display Assistant Utility has two modes of operation: Wizard and OSD mode. The preferred method of use is Wizard mode, which takes you through a step-by-step process to accurately calibrate the monitor. This method relies on a sequence of steps that will obtain the best display results when completed.

NOTE:

Refer to the HP Display Assistant user guide for additional information about the software.

ENWW Adjusting the Monitor Settings 25

Identifying Monitor Conditions

Special messages will appear on the monitor screen when identifying the following monitor conditions:

Input Signal Out of Range—Change resolution setting to 1280 × 1024 – 60Hz (LP1965 19" model), 1600 × 1200 - 60Hz (LP2065 20" model), or 1920 × 1200 - 60 Hz (LP2465 24" model)—

Indicates the monitor does not support the input signal because the resolution and/or refresh rate are set higher than the monitor supports.

No Input Signal—Indicates the monitor is not receiving a video signal from the PC on the monitor video input connector. Check to determine if the PC or input signal source is off or in the power saving mode.

Multiple Inputs are ActiveUse the OSD to select the desired video input—Indicates the monitor is connected to two video inputs. The monitor is trying to display both inputs, but after 10 seconds the monitor uses the default signal input.

Auto Adjustment is in Progress—Indicates the auto-adjustment function is active.

Monitor Going to Sleep—Indicates the screen display is entering a sleep mode.

Check Video Cable—Indicates the video cable is not properly connected to the computer.

OSD Lock—The OSD can be enabled or disabled by pressing and holding the Menu button on the front panel for 10 seconds. If the OSD is locked, the warning message OSD Lock-Out displays for ten seconds.

If the OSD is locked, press and hold the Menu button for 10 seconds to unlock the OSD.

If the OSD is unlocked, press and hold the Menu button for 10 seconds to lock the OSD.

Sleep Timer Mode

The Sleep Timer mode is an energy-saving feature that enables you to set a time for the monitor to power on and off at the same time every day. This also extends the life of the backlight bulbs in the monitor. The Sleep Timer has five settings:

Set Current Time

Set Sleep Time

Set On Time

● Timer: On/Off

Sleep Now

To set the timer:

1.

Press the Menu button on the monitor front panel to display the Advanced Menu.

2.

Scroll down and highlight Management.

3.

Press the Menu button to select Management.

4.

Scroll down and highlight and select Sleep Timer > Set Current Time.

26 Chapter 4 Operating the Monitor ENWW

NOTE:

You must set the current local time before you reset the time for Sleep Time or On

Time. Note that the time is displayed in a 24–hour clock format. For example, 1:15 p.m. is displayed as 13 hours 15 minutes.

5.

Press the Menu button once to enter the adjustment mode for hours.

6.

Press the (Minus) or + (Plus) button to adjust the hour.

7.

Press the Menu button again to enter the time for minutes.

8.

Press the (Minus) or + (Plus) button to adjust the minutes.

9.

Press the Menu button to lock in the time chosen.

10.

After setting the current time, the highlight automatically skips to Set Sleep Time hours. Repeat steps 6 through 9 to set Sleep Time.

11.

If you do not want to set Sleep Time, press the Menu button twice, then select Save and

Return to exit the menu.

12.

After setting Sleep Time, the highlight automatically skips to Set On Time hours. Repeat steps 6 through 9 to set On Time.

13.

Set the Timer mode to On to activate the Sleep Timer settings.

14.

When you are finished, select Save and Return to exit the menu.

The fifth selection, Sleep Now, turns the monitor backlights off immediately and stays in sleep mode until the next On Time activates or a monitor button is pressed.

HP Display LiteSaver

HP Display LiteSaver is a software application, available on the CD, that increases monitor life and saves energy. It allows you to place the monitor into its low power sleep mode at predefined times by shutting down or reducing power to most internal circuits. This helps protect the LCD panel against image retention. Image retention can occur when the monitor is left on while displaying the same image for an extended period of time, leaving a shadow of the image on the screen.

Installing the HP Display LiteSaver Software

1.

Insert the CD in the computer CD-ROM Drive. The CD menu is displayed.

2.

Select Install HP Display LiteSaver Software.

3.

After installing the software, click the HP Display LiteSaver icon in the Windows system tray or right-click the icon and select Configure from the pop-up menu.

4.

Select the following options to configure the HP Display LiteSaver features:

Table 4-3 HP Display LiteSaver Configuration Options

Select This Option To Do This

Enable Display LiteSaver

Display Off

Enables the HP Display LiteSaver functions; deselect to disable the HP Display

LiteSaver.

Sets the time when the monitor automatically turns off. This does not affect screen saver operation, which has priority over the HP Display LiteSaver.

ENWW HP Display LiteSaver 27

Table 4-3 HP Display LiteSaver Configuration Options (continued)

Select This Option To Do This

Display On

Activity Extension

Show 1 minute Display Off Notice

Status

OK

Cancel

Help

Exit

Sets the time when the monitor automatically turns on. This does not affect screen saver operation, which has priority over the HP Display LiteSaver.

Sets the time in minutes before the monitor turns off if there is any keyboard or mouse activity after the Display Off time is reached. If the keyboard or mouse is used, then

HP Display LiteSaver waits until the set amount of time before turning the display off again. Set to 0 to disable. If disabled, the monitor will turn off as soon as the

Display Off time is reached, regardless of keyboard or mouse activity.

Displays a popup message in the system tray 1 minute before the monitor is turned off by HP Display LiteSaver.

Shows the time until the monitor is next due to be turned off by HP Display LiteSaver.

Stores the current settings and minimizes HP Display LiteSaver to the System Tray.

Restores the previous settings and minimizes HP Display LiteSaver to the System

Tray. HP Display LiteSaver will continue to run.

Opens the online help file.

Exits and closes the HP Display LiteSaver. It will no longer control the monitor power until it is next run.

View HP Display LiteSaver Readme on the CD for additional information on how to configure HP Display

LiteSaver.

sRGB Support

The monitor is designed to support sRGB for color management, which adapts to the color standards used in the image technology industry.

To take advantage of the sRGB support, you will need to change the monitor’s color temperature to sRGB and install the sRGB color profile (ICM) file.

NOTE:

The sRGB color temperature preset will improve the color accuracy of sRGB images on the computer monitor, but some color variation may still occur.

Changing the Color Temperature

1.

Press the Menu button on the front panel of the monitor to launch the Main Menu of the OSD.

2.

Select Advanced Menu to access all options in the Main Menu.

3.

Select Color to display the Color Temperature menu.

4.

Select sRGB.

5.

Select Save and Return to exit the menu.

Installing the sRGB ICM File for Microsoft Windows 2000 and Windows XP

NOTE:

To complete the following procedure, you must be logged in as an administrator or a member of the administrator’s group. If the computer is connected to a network, network policy settings may prevent you from completing this procedure. The sRGB ICM file does not support Windows 95 and

Windows NT operating systems.

28 Chapter 4 Operating the Monitor ENWW

1.

Click the Display icon in the Control Panel.

2.

In the Display Properties windows, select the Settings tab, then click the Advanced button.

3.

Select the Color Management tab, then click the Add button to open the Add Profile

Association dialog box.

4.

Select the sRGB Color Space Profile.icm file, then click the Add button

5.

To activate a color profile for the monitor, you must set it as the Default Monitor Profile. Select

sRGB Color Space Profile, then click Set as Default button.

6.

Click Apply or OK.

ENWW sRGB Support 29

A Troubleshooting

Solving Common Problems

The following table lists possible problems, the possible cause of each problem, and the recommended solutions.

Problem Possible Cause Solution

Screen is blank.

Image appears blurred, indistinct, or too dark.

Image is not centered

Check Video Cable is displayed on screen.

Power cord is disconnected.

Power switch on front panel of the monitor is turned off.

Connect the power cord.

Press the front panel power button.

Master power switch on rear panel of the monitor is turned Off.

Video cable is improperly connected.

Turn the master power switch to On.

Screen blanking is active.

Press any key on the keyboard or move the mouse to inactivate the screen blanking utility.

Brightness and contrast are too low. Press the —/Auto button on the front panel. If this does not correct the image, press the Menu button to open the Basic

OSD Menu, and adjust the brightness and contrast scales as needed.

Position may need adjustment.

Connect the video cable properly. Refer to Chapter 3,

Setting Up the Monitor on page 5

for more information.

Monitor video cable is disconnected.

Press the Menu button to access the OSD menu. Select

Image Control/Horizontal Position or Vertical Position to adjust the horizontal or vertical position of the image.

Connect the DVI-D signal cable to the DVI-I connector on the computer, or the VGA to DVI-I cable to the DVI-I connector on the computer. Be sure that the computer power is off while connecting the video cable.

Out of Range. Set Monitor

to 1280 × 1024 @ 60Hz is displayed on screen.

(LP1965 19" model)

Video resolution and/or refresh rate are set higher than what the monitor supports.

Restart the computer and enter Safe Mode. Change the settings to a supported setting (see

Table B-4 LP1965

Model Factory Preset Modes on page 35 ). Restart the

computer so that the new settings take effect.

Out of Range. Set Monitor

to 1600 × 1200 @ 60Hz is displayed on screen.

(LP2065 20" model)

Video resolution and/or refresh rate are set higher than what the monitor supports.

Restart the computer and enter Safe Mode. Change the settings to a supported setting (see

Table B-5 LP2065

Model Factory Preset Modes on page 35 ). Restart the

computer so that the new settings take effect.

Out of Range. Set Monitor

to 1920 × 1200 @ 60Hz is displayed on screen.

(LP2465 24" model)

Video resolution and/or refresh rate are set higher than what the monitor supports.

Restart the computer and enter Safe Mode. Change the settings to a supported setting (see

Table B-6 LP2465

Model Factory Preset Modes on page 36 ). Restart the

computer so that the new settings take effect.

30 Appendix A Troubleshooting ENWW

Problem

HP Display LiteSaver doesn't turn off the monitor screen.

Possible Cause Solution

The Activity Extension time has not elapsed.

The default Activity Extension value is set to 10 minutes.

The HP Display LiteSaver will wait to detect no input or movement from the keyboard or mouse for 10 consecutive minutes after the Display Off time has passed, before the monitor enters into low-power mode. For example, if the

Display Off time is set to 5 minutes from the current time and the Activity Extension is set to 10 minutes, the HP

Display LiteSaver will not actually turn off the display until

10 minutes of inactivity has elapsed, even though the

Display Off time is 5 minutes from now.

The HP Display LiteSaver may not be compatible with the computer system. Some notebook computers are not compatible and the monitor power can not be controlled.

Confirm that the HP Display LiteSaver is compatible with the system.

1.

Right-click on the HP Display LiteSaver icon in the system tray.

2.

Select Power Off Display from the menu.

The monitor screen should turn off if the system is compatible. To turn the monitor back on, wait 5 seconds and move the mouse.

NOTE:

If the monitor did not turn off, then the computer graphics driver is not compatible with the HP Display

LiteSaver software.

The monitor is off but it did not seem to enter into a lowpower sleep mode.

The monitor's power saving control is disabled.

Check the monitor's OSD menu setting for power saving enable/disable controls. The control should be set to enable to allow the monitor to enter into low-power modes.

Using the Worldwide Web

For the online access to technical support information, self-solve tools, online assistance, community forums of IT experts, broad mutlivendor knowledge base, monitoring and diagnostic tools, go to http://www.hp.com/support

Preparing to Call Technical Support

If you cannot solve a problem using the trouble shooting tips in this section, you may need to call technical support. Have the following information available when you call:

The monitor

Monitor model number

Serial number for the monitor

Purchase date on invoice

Conditions under which the problem occurred

Error messages received

Hardware configuration

Hardware and software you are using

ENWW Using the Worldwide Web 31

B Technical Specifications

NOTE:

All performance specifications are provided by the component manufacturers. Performance specifications represent the highest specification of all HP's component manufacturers' typical level specifications for performance and actual performance may vary either higher or lower.

LP1965 Model

Table B-1 LP1965 Model Specifications

Display

Type

Viewable Image Size

Tilt

Swivel

Maximum Weight (Unpacked)

Dimensions (include base)

Height

Depth

Width

Maximum Graphic Resolution

Text Mode

Dot Pitch

Horizontal Frequency

Vertical Refresh Rate

Environmental Requirements Temperature

19 inches

TFT LCD

19–inch diagonal

-5 to 30°

-45 to 45°

17.2 lbs.

14.85 inches

8.78 inches

15.90 inches

1280 × 1024 (75 Hz) analog input

1280 × 1024 (75 Hz) digital input

720 × 400

0.294 (H) × 0.294 (W) mm

24 to 83 kHz

48 to 76 Hz

48.3 cm

48.3 cm

7.8 kg

377.16 mm

223.00 mm

403.90 mm

Operating Temperature

Storage Temperature

Relative Humidity

Power Source

41 to 95° F

-4 to 140° F

20 to 80%

100 — 240 VAC, 50/60 Hz

5 to 35° C

-20 to +60° C

32 Appendix B Technical Specifications ENWW

Table B-1 LP1965 Model Specifications (continued)

Altitude:

0 to 12,000 feet

Operating

0 to 40,000 feet

Storage

Power Consumption (maximum)

Input Terminal

<55 watts

Two DVI-I connectors with cables included.

LP2065 Model

Table B-2 LP2065 Model Specifications

Display

Type

Viewable Image Size

Tilt

Swivel

Maximum Weight (Unpacked)

Dimensions (include base)

Height

Depth

Width

Maximum Graphic Resolution

20.1 inches

TFT LCD

20–inch diagonal

-5 to 30°

-45 to 45°

20.3 lbs.

16.7 inches

8.7 inches

17.4 inches

1600 × 1200 (75 Hz) analog input

1600 × 1200 (60 Hz) digital input

720 × 400

0.258 (H) × 0.258 (W) mm

30 to 94 kHz

48 to 85 Hz

Text Mode

Dot Pitch

Horizontal Frequency

Vertical Refresh Rate

Environmental Requirements Temperature

Operating Temperature

Storage Temperature

Relative Humidity

Power Source

Altitude:

Operating

Storage

Power Consumption (maximum)

Input Terminal

41 to 95° F

-4 to 140° F

20 to 80%

100 — 240 VAC, 50/60 Hz

0 to 12,000 feet

0 to 40,000 feet

<75 watts

Two DVI-I connectors with cables included.

0 to 3657.6 m

0 to 12192 m

51 cm

51 cm

9.2 kg

425.0 mm

220.0 mm

443.0 mm

5 to 35° C

-20 to +60° C

0 to 3657.6 m

0 to 12192 m

ENWW LP2065 Model 33

LP2465 Model

Table B-3 LP2465 Model Specifications

Display

Type

Viewable Image Size

Tilt

Swivel

Maximum Weight (Unpacked)

Dimensions (include base)

Height

Depth

Width

Maximum Graphic Resolution

24.1 inches

TFT LCD

24–inch diagonal

-5 to 25°

-45 to 45°

23.4 lbs.

17.3 inches

9.1 inches

22.0 inches

1920 × 1200 (60Hz) analog input

1920 × 1200 (60Hz) digital input

720 × 400

0.270 (H) × 0.270 (W) mm

30 to 94 kHz

48 to 85 Hz

Text Mode

Dot Pitch

Horizontal Frequency

Vertical Refresh Rate

Environmental Requirements Temperature

Operating Temperature

Storage Temperature

Relative Humidity

Power Source

Altitude:

Operating

Storage

Power Consumption (maximum)

Input Terminal

41 to 95° F

-4 to 140° F

20 to 80%

100 — 240 VAC, 50–60 Hz

0 to 12,000 feet

0 to 40,000 feet

<110 watts

Two DVI-I connectors with cables included.

61 cm

61 cm

10.6 kg

440.0 mm

232.0 mm

558.4 mm

5 to 35° C

-20 to +60° C

0 to 3657.6 m

0 to 12192 m

34 Appendix B Technical Specifications ENWW

Recognizing Preset Display Resolutions

The display resolutions listed below are the most commonly used modes and are set as factory defaults.

This monitor automatically recognized these preset modes and they will appear properly sized and centered on the screen.

Table B-4 LP1965 Model Factory Preset Modes

Preset

1

Pixel Format

640 × 480

Horz Freq (kHz)

31.5

Vert Freq (Hz)

60.0

10

11

12

13

14

15

6

7

8

9

2

3

4

5

640 × 480

640 × 480

720 × 400

800 × 600

800 × 600

800 × 600

832 × 624

1024 × 768

1024 × 768

1024 × 768

1152 × 870

1152 × 900

1280 × 1024

1280 × 1024

56.5

60.0

68.7

71.7

64.0

80.0

48.1

46.9

49.7

48.4

37.9

37.5

31.5

37.9

70.0

75.0

75.0

76.0

60.0

75.0

72.0

75.0

75.0

60.0

73.0

75.0

70.0

60.0

ENWW

Table B-5 LP2065 Model Factory Preset Modes

Preset Pixel Format Horz Freq (kHz)

5

6

7

8

1

2

3

4

9

10

11

640 × 480

640 × 480

640 × 480

720 × 400

800 × 600

800 × 600

832 × 624

1024 × 768

1024 × 768

1024 × 768

1152 × 870

37.9

53.7

49.7

48.4

31.5

37.5

43.3

31.5

60.0

68.7

68.7

60.3

85.1

74.6

60.0

75.0

85.0

75.1

Vert Freq (Hz)

59.9

75.0

85.0

70.1

Recognizing Preset Display Resolutions 35

Table B-5 LP2065 Model Factory Preset Modes (continued)

12 1152 × 900 61.8

13

14

15

16

1280 × 960

1280 × 1024

1280 × 1024

1280 × 1024

17

*18

* For analog inputs only.

1600 × 1200

1600 × 1200

60.0

64.0

80.0

91.2

75.0

93.8

66.0

60.0

60.0

75.0

85.0

60.0

75.0

Table B-6 LP2465 Model Factory Preset Modes

Preset

1

Pixel Format

640 × 480

Horz Freq (kHz)

31.5

14

15

16

17

10

11

12

13

6

7

8

9

2

3

4

5

18

19

*20

21

*22

23

640 × 480

720 × 400

800 × 624

800 × 600

832 × 624

1024 × 768

1024 × 768

1024 × 768

1152 × 720

1152 × 870

1152 × 900

1280 × 768

1280 × 960

1280 × 1024

1280 × 1024

1280 × 1024

1600 × 1200

1600 × 1200

1600 × 1200

1680 × 1050

1920 × 1080

1920 × 1200

60.0

64.0

80.0

91.2

44.9

68.7

61.8

47.4

49.7

48.4

60.0

68.7

37.5

31.5

37.9

46.9

61.7

75.0

93.8

65.3

67.2

74.0

60.0

60.0

75.0

60.1

60.0

60.0

60.0

60.0

75.0

85.0

60.0

75.1

66.0

60.0

74.6

60.0

75.0

85.0

Vert Freq (Hz)

59.9

75.0

70.1

60.3

75.0

36 Appendix B Technical Specifications ENWW

Table B-6 LP2465 Model Factory Preset Modes (continued)

*24 1920 × 1200 74.6

*For analog inputs only.

60.0

Entering User Modes

The video controller signal may occasionally call for a mode that is not preset if:

You are not using a standard graphics adapter.

● You are not using a preset mode.

It this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen display. Your changes can be made to any or all of these modes and saved in memory. The monitor automatically stores the new setting, then recognized the new mode just as it does a preset mode. In addition to the 15 factory preset modes for the LP1965 model, the 18 factory present modes for the

LP2065 model, and the 24 factory preset modes for the LP2465 model, there are four user modes that can be entered and stored.

Energy Saver Feature

When the monitor is in its normal operating mode, the monitor uses less than 37 watts (LP1965 model) of power or 55 watts of power (LP2065 and LP2465 models) and the Power light is green.

The monitor also supports a reduced power state. The reduced power state will be entered into if the monitor detects the absence of either the horizontal sync signal and/or the vertical sync signal. Upon detecting the absence of these signals, the monitor screen is blanked, the backlight is turned off, and the power light is turned amber. When the monitor is in the reduced power state, the monitor will utilize less than 2 watts of power. There is a brief warm up period before the monitor will return to its normal operating mode.

Refer to the computer manual for instructions on setting energy saver features (sometimes called power management features).

NOTE:

The above power saver feature only works when connected to computers that have energy saver features.

By selecting the settings in the monitor's Energy Saver utility, you can also program the monitor to enter into the reduced poser state at a predetermined time. When the monitor's Energy Saver utility causes the monitor to enter the reduced power state, the power light blinks amber.

ENWW Entering User Modes 37

C Agency Regulatory Notices

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

● Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio or television technician for help.

Modifications

The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hewlett Packard Company may void the user's authority to operate the equipment.

Cables

Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC Rules and Regulations.

Declaration of Conformity for Products Marked with the

FCC Logo (United States Only)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.

This device may not cause harmful interference.

2.

This device must accept any interference received, including interference that may cause undesired operation.

For questions regarding the product, contact:

38 Appendix C Agency Regulatory Notices ENWW

Hewlett Packard Company

P. O. Box 692000, Mail Stop 530113

Houston, Texas 77269-2000

Or, call 1-800-HP-INVENT (1-800 474-6836)

For questions regarding this FCC declaration, contact:

Hewlett Packard Company

P. O. Box 692000, Mail Stop 510101

Houston, Texas 77269-2000

Or, call (281) 514-3333

To identify this product, refer to the Part, Series, or Model number found on the product.

Canadian Notice

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment

Regulations.

Avis Canadien

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

European Union Regulatory Notice

This product complies with the following EU Directives:

Low Voltage Directive 73/23/EEC

● EMC Directive 89/336/EEC

Compliance with these directives implies conformity to applicable harmonized European standards

(European Norms) which are listed on the EU Declaration of Conformity issued by Hewlett-Packard for this product or product family.

This compliance is indicated by the following conformity marking placed on the product:

ENWW

This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g. Bluetooth)

This marking is valide for EU nonharmonized Telecom products.

*Notified body number (used only if applicable — refer to the product label).

Canadian Notice 39

German Ergonomics Notice

HP products which bear the “GS” approval mark, when forming part of a system comprising HP brand computers, keyboards and monitors that bear the “GS” approval mark, meet the applicable ergonomic requirements. The installation guides included with the products provide configuration information.

Japanese Notice

Korean Notice

Power Cord Set Requirements

The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the monitor to operate on input voltages between 100–120V or 200–240V.

The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for use in the country where you purchased the equipment.

If you need to obtain a power cord for a different country, you should purchase a power cord that is approved for use in that country.

The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the cross-sectional area of the wire must be a minimum of 0.75 mm² or 18 AWG, and the length of the cord must be between 6 feet (1.8 m) and 12 feet (3.6 m).

If you have questions about the type of power cord to use, contact an authorized HP service provider.

A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product.

Japanese Power Cord Requirements

For use in Japan, use only the power cord received with this product.

CAUTION:

Do not use the power cord received with this product on any other products.

40 Appendix C Agency Regulatory Notices ENWW

Product Environmental Notices

Materials Disposal

This HP product contains mercury in the fluorescent lamp in the display LCD that might require special handling at end-of-life.

Disposal of this material can be regulated because of environmental considerations. For disposal or recycling information, contact the local authorities or the Electronic Industries Alliance (EIA) http://www.eiae.org

.

Disposal of Waste Equipment by Users in Private Household in the

European Union

This symbol on the product or on its packaging indicates that this product must not be disposed of with your household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling or waste electrical and electronic equipment.

The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact the local city office, the household waste disposal service or the shop where you purchased the product.

Chemical Substances

HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006

of the European Parliament and the Council). A chemical information report for this product can be found at: http://www.hp.com/go/reach

Restriction of Hazardous Substances (RoHS)

A Japanese regulatory requirement, defined by specification JIS C 0950, 2005, mandates that manufacturers provide Material Content Declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, visit http://www.hp.com/go/jisc0950 .

ENWW Product Environmental Notices 41

11363-2006

11363-2006

42 Appendix C Agency Regulatory Notices ENWW

D LCD Monitor Quality and Pixel Policy

The TFT monitor uses high-precision technology, manufactured according to HP standards, to guarantee trouble-free performance. Nevertheless, the display may have cosmetic imperfections that appear as small bright or dark spots. This is common to all LCD displays used in products supplied by all vendors and is not specific to the HP LCD. These imperfections are caused by one or more defective pixels or sub-pixels.

A pixel consists of one red, one green, and one blue sub-pixel.

A defective whole pixel is always turned on (a bright spot on a dark background), or it is always off

(a dark spot on a bright background). The first is the more visible of the two.

A defective sub-pixel (dot defect) is less visible than a defective whole pixel and is small and only visible on a specific background.

The HP display does not have more than:

3 bright dots.

5 dark dots.

5 total bright and dark dots.

● No more than two adjacent (less than 2.5 mm edge-to-edge) defective pixels.

To locate defective pixels, the monitor should be viewed under normal operating conditions, in normal operating mode at a supported resolution and refresh rate, from a distance of approximately 50 cm (20 in).

HP expects that, over time, the industry will continue to improve its ability to produce LCDs with fewer cosmetic imperfections and HP will adjust guidelines as improvements are made.

ENWW 43

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Table of contents