Air Mask MSA Durability and performance for critical life-safety personnel.

Air Mask MSA Durability and performance for critical life-safety personnel.
MSA
Air Mask
Durability and performance for critical life-safety personnel.
MSA FireHawk M7XT Air Mask
Designed to meet NFPA 1981 and 1982 2013- edition standards.
Determined to exceed your safety equipment expectations!
APPROVALS PENDING
Through NFPA, firefighters strive to improve the durability and performance of their SCBA and PASS devices. It’s no
different with the new 2013 edition of NFPA 1981 and 1982 NFPA standards for self-contained breathing apparatus
and personal alert safety systems (PASS). These revisions call for a minimum low pressure alarm set point of
33% cylinder operating pressure remaining, improved facepiece lens radiant heat performance, 500° F heat and
flame exposure, and standardized PASS device alarm sound patterns. In addition, NFPA has raised the bar on voice
communication capability, now requiring measurable, minimum Sound Transmission Index (STI) scores for both
mechanical and electronic communications.
MSA’s new FireHawk M7XT Air Mask represents a true technological achievement in critical firefighter protection.
As firefighters determined the safety requirements required to meet NFPA 1981 and 1982 2013-edition standards,
MSA engineering teams began to design solutions. The new FireHawk M7XT Air Mask, with its life-safety design
components built upon a modular air mask platform, exceeds NFPA 2013 requirements and provides firefighters
with the highest quality SCBA available.
enclosures are hermetically sealed to ensure a
consistent water-tight seal and to protect
against fireground contaminants. The MSA
I-HUD Receiver provides wireless heads-up
displayed (HUD) information; the unit fits
securely inside the firefighters’ facepiece,
reducing facepiece profile, eliminating snag
hazards, protecting the I-HUD Receiver from
the fireground environment.
1. Taking the Heat
Although MSA PASS alarms have performed
in extreme temperatures for more than a
decade, a top priority was to design an alarm
that could really take the heat! The new
FireHawk M7XT PASS alarm was developed in
cooperation with prominent acoustic experts,
resulting in an emitter that exceeds 95
decibels with solid performance when used
within elevated temperature environments.
2. Reliable Electronics
Protected, the FireHawk M7XT HUD, I-HUD
Receiver, Power Module, and Control Module
are encased within proprietary hightemperature impact-grade polymer,
providing the highest possible protection
against impact and water ingress. Electronics
3. Critical Communication
We’ve got you covered with communications,
starting with a high-performance mechanical
speech diaphragm with performance that
exceeds NFPA requirements as a stand-alone
solution. The NEW Ultra Elite® XT
Communication System electronic voice
amplifier features an internal facepiece
microphone that always provides clear
communication especially during the most
critical of times. It’s all about communication
safety, the ability to speak loudly and clearly
when it matters most.
4. Fireground Management
Firefighter accountability systems have never
before been as practical, complete and userfriendly as MSA’s Accountability System. User
interfaces based upon the time-proven ICM®
TxR Unit feature thousands of deployed
systems in virtually every type of fire
department. The unit displays a full array of
visual and audible information for up to 100
firefighters within a one-mile-line-of-site,
exactly what incident commanders wanted.
Record-keeping is also made easy by
downloading reports.
5. Emergency Egress
Firefighters must be prepared for the
unexpected. Emergency egress from elevated
heights can be next to impossible without
the right safety equipment. That's why the
FireHawk M7XT Air Mask offers the Rescue
Belt II System, an NFPA-compliant integrated
self-rescue egress, providing you the
firefighter with one more lifesaving option in
the face of danger.
6. CBRN Protection
"Above and beyond" protection is also
provided with the CBRN Firehawk® MMR. The
CBRN Firehawk MMR includes a positive
protection Tetraplex Shield to prevent contact
between chemical warfare agents and the
most vulnerable component of regulators,
the thin elastomeric diaphragm. Other airwash solutions may pass muster when used
in laboratory conditions, providing positive
protection against all potential conditions,
but laboratory conditions rarely await you in
the heat of battle.
7. Cross Contamination
Protection
External hazards are bad enough without
having concerns of spreading illness among
firefighters through shared-use SCBA. MSA's
Ultra Elite® XT Facepiece helps to protect
against cross-contamination with MSA's
inhalation check valve, a must-have in
modern firefighting respiratory protection.
8. Lightweight and
Easy-to-Use
Firefighters already have enough weight to
carry and gear to maintain, so MSA engineers
set out to lighten your load, reduce parts
count, simplify maintenance, maximize user
comfort, and modularize the design.
The FireHawk M7XT Air Mask features a
lightweight polymer back plate, with quickrelease harness straps, user-friendly cam-lock
cylinder attachment, fast change-out electronic
components, large swiveling lumbar pad, and
compact regulators. Our air mask pneumatics
deliver reliable performance with minimal
internal components (fewer than 30 parts for
the MMR and 14 for the first-stage regulator).
Our time-tested Ultra Elite XT Facepiece has
unbeatable comfort, visibility, communications,
cross-contamination protection, fit, and seal.
3
9. Expandable Technological
Design
The FireHawk M7XT Air Mask electronics
ensemble accepts technology upgrades
through a 2.4GHz personal wireless network
that transmits and receives encrypted
information over short range on a firefighter’s
body. This wireless feature provides the
capability to add on future technology to
provide additional information back to incident
command through the Accountability System.
You never have to worry about radio
interference either – we have you covered with
an RFI shield design that protects against all
fireground radio signals. The new FireHawk
M7XT Air Mask provides you with the best
technology today and positions you for the
future.
www.MSAsafety.com
MSA FireHawk M7XT Air Mask
High-visibility shoulder pads
FireHawk M7XT Air Mask
carrier and harness assembly
with side handles and
carabiner attachment
PR14™ First-Stage Regulator
with only 14 internal parts
Ultra Elite XT Facepiece with high-heat Tufflens
and Kevlar SpeeD-ON® Head Harness
Hi-Viz Luminescent
cylinder band
Wireless FireHawk
I-HUD Receiver
Parachute-style
friction buckles
Ultra Elite XT Voice
Amplifier
FireHawk M7XT Control Module
with accelerometer motion sensor,
digital and mechanical pressure
display time remaining and
thermal alarm
Regulator keeper
Firehawk® CBRN MMR
Double-pull
Kevlar waist belt
High-performance
mechanical
speaking diaphragm
Specifications - Ordering Information
SCBA
•
•
•
•
•
•
•
•
•
Weight with empty H-30 SL cylinder (including batteries) is 20 lbs, 8 oz
Battery life of electronics > 1 year with frequent use (standard alkaline cells)
RFI shielding up to 50v/m radio signal load across 80 MHz to 2.5 GHz range
PASS device heat alarm performance > 95 dB @ 500°F
Water immersion protection – M7XT electronics at 5-ft. depth for 1 hour
Air delivery – manufactured to NFPA standard 320 lpm rate; design qualified at twice NFPA rate (640 lpm) cyclic breathing
Data-logging – most recent 25-hours-of-use information
Electronic ID tagging (RFID) standard with M7 and M7XT Accountability System
Optional equipment: Rescue Belt II System for rappeling (50-ft.), M7XT Accountability System, Extend-Aire II and Quick-Fill® Emergency Breathing
Systems, push-to-connect or slide-to-connect regulator attachments, swiveling lumbar pad, and chest-strap.
• Standard equipment includes facepiece, cross-contamination check valve, thermal alarm, time-remaining display, wireless programming
and network, front and rear buddy lights, auto-dim HUD, large drag-carrying handles, stainless steel cylinder band with cam-lock system.
Ordering Information
How to Order SCBA: Get the Exact Model You Need
The Assemble-To-Order System (ATO) enables fast and easy ordering of the right mask for you. Instead of choosing from a handful of complete
air mask assemblies, you can order a custom-made air mask with every option exactly as desired.
Contact MSA Customer Service for details.
Assemble-To-Order System for FireHawk M7XT Air Mask
Air
Mask
Pressure
L
H
2216
4500
Carrier/
Harness
Assembly
A Single-pull
without
chest strap
B Single-pull
with
chest strap
C Double-pull
without
chest strap
D Double-pull
with
chest strap
Options A
& B can only
be chosen if
a rescue belt
option is
selected
Lumbar
Pad/
Rescue
Belt
0 None
1 Swiveling
lumbar pad
A Rescue Belt II
System
w/hook, 50'
B Rescue Belt II
System
w/carabiner,
50'
C Rescue Belt II
System
w/hook,
FireTech
rope, 50'
D Rescue Belt II
System
w/carabiner,
FireTech
rope, 50'
If choosing
a rescue belt,
the carrier/
harness
assembly
must be a
single pull
(options A
or B).
Cylinder
0 None
2216 psi Cylinders
1 3AL
aluminum
with air
2 30' carbon
with air
3 3AL
aluminum,
less air
4 30' carbon,
less air
4500 psi Cylinders
0 None
1 30' carbon
with air
2 45' carbon
with air
3 45' carbon
low-profile
with air
4 60' carbon
with air
5 30' carbon
less air
6 45' carbon
less air
7 45' carbon
low-profile
less air
8 60' carbon
less air
MMR
Type
A CBRN
Firehawk
STC,
threaded
B CBRN
Firehawk
STC, QC
C CBRN
Firehawk
PTC,
threaded
D CBRN
Firehawk
PTC, QC
Emergency
Breathing
System
0 None
1 Quick-Fill
System
2 Quick-Fill
System with
Hose and
Pouch
3 Quick-Fill
System
ready
A ExtendAire II
B ExtendAire II
with
Quick-Fill
System
C ExtendAire II
with QuickFill System
and QuickFill System
Transfill
hose/pouch
Ultra Elite
Nosecup
XT
Facepiece
A Hycar™
Rubber,
small
B Hycar
Rubber,
medium
C Hycar
Rubber,
large
1 Medium
2 Large
Head
Harness
Electronic
Communications
1 SpeeD-ON
Harness
less neck
strap
2 SpeeD-ON
Harness
with neck
strap
A None
B Communication ready
with
bracket
C Ultra Elite
XT amp
D Ultra Elite
XT amp/RI
Integrated
PASS
A PASS with
thermal
alarm
activated
C PASS
without
thermal
alarm
activated
D PASS,
telemetry
and
thermal
alarm
E PASS,
telemetry
and
without
thermal
alarm
HeadsUp
Display
A M7XT
HUD
B M7XT
I-HUD
Case
0
1
2
3
None
Hard case
Soft case
Facepiece
bag,
black,
no case
4 Facepiece
bag,
black,
with hard
case
5 Facepiece
bag,
black,
with soft
case
5
Approvals
Pending
NFPA 1981
and
1982-2013
editioncompliant
NIOSH 42
CFR Part 84
CBRNcertified
QUANTITY
A-M7XT
www.MSAsafety.com
Ordering Information
Carbon-Wrapped Cylinders
SuperLite Carbon Cylinders
SuperLite Carbon Cylinders (4500 psi)
MSA’s SuperLite Carbon Cylinders reduce cylinder weight by up to 12% over traditional carbon cylinders, significantly decreasing your firefighters'
SCBA weight burden. Double-drawn, super lightweight cylinder liner combined with optimized carbon-based composite materials reduces
cylinder weight while maintaining a high strength-to-weight ratio.
SuperLite Carbon Cylinders incorporate the same proven technology found previously in MSA’s fully-wound carbon composite Stealth Cylinders.
SuperLite Carbon Cylinders are available in four cylinder models.
Carbon-Wrapped Cylinders (2216 psi)
MSA’s 2216 psi carbon-wrapped cylinder features a unique outer-wrap made of lightweight, high-performance carbon fibers that reduces
cylinder weight by two to six pounds when compared to fiberglass-wrapped cylinders and by as much as 10 pounds when compared to
aluminum cylinders.
NIOSH Service Life
Pressure
Weight
807586-SP
Part No.
L-30* carbon-wrapped
Cylinder Type
30 minutes
2216 psig
8 lb. 0 oz.
469619-SP
Fiberglass hoop-wound
30 minutes
2216 psig
13 lb. 0 oz.
809872-SP
Aluminum
30 minutes
2216 psig
18 lb. 0 oz.
10127944-SP
H-30 SL, SuperLite Carbon Cylinder
30 minutes
4500 psig
6 lb. 9 oz.
10127945-SP
H-45 SL, SuperLite Carbon Cylinder
45 minutes
4500 psig
8 lb. 8 oz.
10149432-SP
H-45S SL, SuperLite Carbon Cylinder, short
45 minutes
4500 psig
8 lb. 2 oz.
10127946-SP
H-60 SL, SuperLite Carbon Cylinder
60 minutes
4500 psig
10 lb. 12 oz.
*These cylinders are capable of custom options.
**All weights shown are approximate.
MSA Accountability System
MSA’s FireHawk M7/M7XT Accountability System revolutionizes
fireground safety by combining the latest computer software with a
high-performance radio module and field-proven technology of
MSA’s ICM TxR Integrated PASS.
ACCOUNTABILITY SYSTEM
BASE STATION KITS
10072240
10098767
ACCOUNTABILITY SYSTEM
Accountability Base Station Kit (includes software, magnetic antenna kit, USB cable, wall-mount cable,
and 8-24 volt power cable)
Accountability Base Station Kit (includes software, fixed antenna kit, USB cable, wall mount cable,
and 8-24 volt power cable)
10083876
M7 Control Module reader / M7 ID tag writer
10083875
M7 ID tags
10075756
Antenna kit with magnetic base
10098766
Antenna kit with fixed base
10063880
USB cable
10049410
8-24 volt, power cable
10047342
Wall mount power cable
Facepiece Assemblies for FireHawk M7XT Air Masks
Ultra Elite XT Facepiece
Firehawk STC Regulator
APPROVALS PENDING
M7 I-HUD Receiver
7
Firehawk PTC Regulator
M7 I-HUD RECEIVER
Small
Medium
Large
ULTRA ELITE
M7XT
FACEPIECE
10149305
10149283
10149327
External HUD
Receiver-ready
for Firehawk STC
MMR Regulator
10149307
10149285
10149329
External HUD and
communication-ready
ULTRA ELITE
M7XT
FACEPIECE
10149306
for Firehawk PTC
MMR Regulator
10149309
10149284
10149286
10149328
10149330
External HUD
Receiver-ready
External HUD and
communication-ready
10114190
Small
M7 I-HUD
RECEIVER-READY
FACEPIECE
ASSEMBLIES
Receiver, M7 I-HUD (for use with Ultra Elite Facepieces equipped with Hycar Rubber nosecups)
Medium
Large
10149309 10149287
10149331
Standard I-HUD
Receiver-ready
10149311 10149289
10149310
Communication
system-ready
10149310 10149288
10149332
Standard I-HUD
Receiver-ready
10149312 10149290
10149334
Communication
system-ready
for Firehawk STC
MMR Regulator
M7 I-HUD
RECEIVER-READY
FACEPIECE
ASSEMBLIES
for Firehawk PTC
MMR Regulator
www.MSAsafety.com
Ordering Information
Emergency Egress System/MSA Rescue Belt II System
RESCUE BELT II SYSTEM
10119369
with 50-ft aramid/nylon rope and Crosby hook
For FireHawk M7XT
and M7 Models
10119370
with 50-ft aramid/nylon rope and carabiner
10119391
with 50-ft FireTech 32 rope and Crosby hook
10119392
with 50-ft FireTech 32 rope and carabiner
MSA Ultra Elite XT Communication System for MSA Facepieces
ULTRA ELITE XT
COMMUNICATIONS
10144673
Ultra Elite XT amp c/w facepiece bracket and microphone
10144676
Ultra Elite XT amp / radio interface c/w facepiece bracket
and microphone
10144672
Ultra Elite XT amp only
10144675
Ultra Elite XT amp / radio interface only
RescueAire™ II Portable Air-Supply System
The Quick-Fill System
QUICK-FILL
SYSTEM
REPLACEMENT
PARTS
10111642 Quick-Fill System Hose Kit in pouch,
3-ft. emergency transfill hose
485331
Emergency transfill hose, less Kevlar pouch
10111404 Replacement pouch for Quick-Fill
or ExtendAire II Systems
25-ft
485391
Male stainless steel quick-disconnect with SAE-10
thread, complete with dust cover (also for use as a
fitting for customized refilling systems)
485392
Female quick-disconnect with SAE-4 thread,
complete with dust cover
12-ft
10-ft
8-ft
6-ft
3-ft
QUICK- 485332 802690 802689 802688 802687 485331 FQD x FQD
FILL
SYSTEM 487907 802677 802675 802673 802671 492796 FQD x CGA-347 outlet
HOSES
487909 802685 802683 802681 802679 487427 FQD x CGA-347 CN
RESCUEAIRE II
PORTABLE
AIR-SUPPLY
SYSTEM
10100096
RescueAire II System, Firehawk Responder
MMR and L-30 cylinder
10041196
Low-pressure
(2215 psig)
10041230
RescueAire II System, Firehawk STC MMR
and L-30 cylinder
RescueAire II System, Firehawk PTC MMR
and L-30 cylinder
RESCUEAIRE II
PORTABLE
AIR-SUPPLY
SYSTEM
High-pressure
(4500 psig)
487906 802704 802703 802702 802701 802705 FQD x SAE-4
10100095
RescueAire II System, Firehawk Responder
MMR, less cylinder
10041198
RescueAire II System, Firehawk STC MMR,
less cylinder
10041232
RescueAire II System, Firehawk PTC MMR,
less cylinder
10100097
RescueAire II System, Firehawk Responder
MMR and H-60 cylinder
10041195
RescueAire II System, Firehawk STC MMR
and H-60SL cylinder
10041199
RescueAire II System, Firehawk PTC MMR
and H-60SL cylinder
10100094
RescueAire II System, Firehawk Responder
MMR, less cylinder
10041197
RescueAire II System, Firehawk STC MMR,
less cylinder
10041231
RescueAire II System, Firehawk PTC MMR,
less cylinder
487908 802678 802676 802674 802672 492797 FQD x CGA-346 outlet
487910 802686 802684 802682 802680 487428 FQD x CGA-346 CN
25-ft lengths are stocked; other custom lengths are available on a special material basis. All SAE
fittings are for high-pressure service. Female quick-disconnect fittings have dust covers.
Note: This bulletin contains only a general
description of the products shown. While uses
and performance capabilities are described,
under no circumstances shall the products be
used by untrained or unqualified individuals
and not until the product instructions
including any warnings or cautions provided
have been thoroughly read and understood.
Only they contain the complete
and detailed information
concerning proper use and
care of these products.
ID 0105-158-MC / May 2013
© MSA 2013 Printed in U.S.A.
APPROVALS PENDING
MSA Corporate Center
1000 Cranberry Woods Drive
Cranberry Township, PA 16066 USA
Phone
724-776-8600
www.MSAsafety.com
Offices and representatives worldwide
For further information:
U.S. Customer Service Center
Phone
1-800-MSA-2222
Fax
1-800-967-0398
MSA Canada
Phone
1-877-MSA-FIRE
Fax
1-800-967-0398
MSA Mexico
Phone
01 800 672 7222
Fax
52 - 44 2227 3943
MSA International
Phone
724-776-8626
Toll Free
1-800-672-7777
Fax
724-741-1559
Email
[email protected]
www.MSAFire.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement