Peerless-AV SP746 PU flat panel wall mount Instruction manual

Below you will find brief information for flat panel wall mount SP746 PU. This product is designed to be installed on wood stud, solid concrete or cinder block walls. Hardware is included for wood stud, solid concrete and cinder block installation. Before installing make sure the supporting surface will support the combined load of the equipment and hardware. Screws must be tightly secured. Do not overtighten screws or damage can occur and product may fail. Never exceed the Maximum Load Capacity.

PDF Download
Document
Peerless-AV SP746 PU Flat Panel Wall Mount Instruction Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Supports TVs & monitors 26”- 47”
  • Maximum load capacity of 80lbs (36kg)
  • Multiple installation options: wood stud, solid concrete and cinder block
  • Easy to install and adjust
  • Comes with all necessary hardware
  • Tilt adjustment for optimal viewing angle
  • Durable and reliable construction
  • Limited lifetime warranty

Frequently asked questions

This product is designed to be installed on wood stud, solid concrete or cinder block walls.

The maximum load capacity of this wall mount is 80 lbs (36 kg).

Hardware is included for wood stud, solid concrete and cinder block installation.

When installing Peerless wall mounts on a wood stud wall covered with gypsum board (drywall), verify that the wood studs are a minimum of 2" x 4" nominal size.

When installing Peerless wall mounts on a concrete wall, the wall must be at least 8" thick with a minimum compressive strength of 2000 psi.
Preparing document for printing…
0%