SINE WAVE SERIES The Power of Reliability

SINE WAVE SERIES The Power of Reliability
The Power of Reliability
Sine Wave Inverters
SINE WAVE SERIES
HIGH EFFICIENCY 1500 WATT INVERTERS
CONVERT 12, 24 or 48VDC INPUT TO
115VAC OUTPUT FOR A VARIETY OF
APPLICATION REQUIREMENTS
The new ICT Sine Wave Series is a pure sine wave 1500 watt inverter that will convert 12, 24 or 48 volts DC to ultra-clean 115 volts AC output at 93% peak
efficiency. ICT has applied its engineering and design expertise to create an inverter that is very compact for its power level, extremely efficient, and has a
unique range of options including TCP/IP Ethernet for remote monitoring and control, transfer relay to allow switching between the inverter and AC grid or
generator power, 19 inch rack mounting kit that holds one or two inverters, and DC wiring box for standalone installations where UL1741 code compliance
is required. Every model can be ordered without the front AC outlets if only the rear AC wiring terminal is desirable for safety reasons in a rack installation.
The ICT Sine Wave Series is ideal for both standalone applications using it’s optional DC wiring box with electrical knockouts, or for communications,
network and industrial power applications using the optional 19 inch rack-mounting kit and standard hardwire AC connectors on the back of the inverter.
The idle current draw is very low, making the Sine Wave Series a good fit for applications where battery life is important, such as off-grid power systems,
tower and communications sites, and renewable energy systems. With optional TCP/IP Ethernet, a user can monitor the inverter, power-cycle the outputs to
reboot connected loads such as blade servers, or shut the inverter down remotely to conserve power with either the integrated HTML web server or SNMP
protocols.
Like all ICT power products, the Sine Wave Series is designed and built in our own North American factory to ensure the highest quality control and
reliability. When you need the most compact, efficient, reliable and flexible DC to AC inverter available, consider the ICT Sine Wave Series for your needs.
Flexibility
Performance
The ICT Sine Wave Series features 93% peak efficiency, ultra-low
noise, and low idle current draw to preserve battery life. The robust
design will operate at 3000 watts of output for 2 seconds in order to
start demanding loads. With two AC outlets on the front as well as
AC hardwire points on the back, the Sine Wave Series is adaptable
to various types of installation requirements, whether standalone or
rack mounted. Both the standard Form C alarm contacts and
optional TCP/IP Ethernet connection can be used to send a remote
alarm signal for any type of fault, ideal for remote installations
where the site is not easily accessible. The Ethernet option allows
remote power-cycling of connected loads, possibly saving a call-out
to the site.
The ICT Sine Wave Series provides an unparalleled set of options to
meet a variety of application requirements.
OPTION
APPLICATION
TCP/IP Ethernet
Monitor and control inverter remotely using
HTML or SNMP protocols
Transfer Relay
Automatically senses and switches between
battery and AC grid power or generator
19” Rack Mount Kit
Mount 1 or 2 Sine Wave Series in 19” site
equipment rack
DC Wiring Box
Comes with knockouts and fasteners for
electrical wiring code installations
Reliability
The ICT Sine Wave Series is designed and manufactured by ICT in
North America. Reliability is achieved through careful design,
thorough qualification of every component used, and extensive
verification testing. Every inverter is extensively tested and burned
in before leaving the factory.
Page 1
Rackmount Kit (Holds Two SWS1500)
Innovative Circuit Technology Ltd.
26921 Gloucester Way, Langley, BC, Canada V4W 3Y3
Tel: 604-856-6303 | Fax: 604-856-6365 | Email: sales@ictcorporate.com | www.ict-power.com
DC Wiring Box
800-152-000
The Power of Reliability
Sine Wave Inverters
Power Specifications
Mechanical
Continuous Output Power
1500 Watts
Dimensions (inches) L x W x H
12.9 x 8.08 x 2.56
Surge Power (2 seconds)
3000 Watts
Weight (lbs/kg)
8 lbs / 3.6 kg
Peak Efficiency
93%
DC Input Connectors - Rear
Bus bars, 5/16” holes
Input Voltage Range - 12V
10.5 - 16.0VDC
AC Outlets - Front
2 x NEMA 5-15P
Input Voltage Range - 24V
21.0 - 32.0VDC
AC Outlets - Rear
Touch Safe Terminal Block
Input Voltage Range - 48V
42.0 - 64.0VDC
Remote Alarm Connectors
Terminal Block (#16 to #24 AWG)
Battery Low Shutdown - 12VDC
10.5VAC
Battery Low Shutdown - 24VDC
21.0VAC
Battery Low Shutdown - 48VDC
42.0VAC
Protection Features
Automatic Overload Protection
Over Temperature Shutdown
No Load Current Draw
<18 Watts
Switched Off Power Draw
<15 mW
Frequency Range
60Hz +/-0.2Hz
Output Voltage Range
115VAC +/-5VAC rms
Harmonic Distortion (typical)
<3%
Resettable 15A Circuit Breaker
Remote Alarm Form C Contacts
Standards
Designed to meet CSA/UL 1741
FCC Class A
Environment
Operating Temperature Range
(Full Power)
o
o
-20 C to +40 C
Warranty
Two years
Temperature Controlled Fans
Humidity
10% - 90% RH (non-cond.)
Options
Transfer Relay
Factory installed 15A transfer relay automatically switches between the inverter output and an AC power source such as the grid or
generator. Transfer time is less than 1 cycle. User adjustable voltage trip level.
TCP/IP Ethernet
Factory installed RJ45 Ethernet port with built-in web server and intuitive graphical user interface. Allows remote monitoring of inverter
Including input voltage, output voltage, output power and alarm conditions. Remote management features include turning AC output
off and on, configuring Email alarm alerts, and configuring the network watchdog feature (cycles the AC output power if network
connectivity is lost). The interface is password protected. The built-in web server supports standard HTML web browsers, SNMPv1/v2
protocols, HTTP and HTTPS servers, and SMTP emails via Ethernet.
DC Wiring Box
Allows standalone installation of Sine Wave Series inverter for electrical code compliant installations. Comes with fasteners, four
electrical knockouts and one control line grommet for wiring access.
Rack Mount Kit
Allows one or two Sine Wave Series inverters to be mounted in a single 2RU 19” rack space. Inverter DC input connectors and AC
auxiliary output hardwire contacts are available on the back, close to where rack wiring connections are.
Ordering Information - All models are Configured To Order (CTO) at the factory. Options must be selected at time of ordering (except ICT-RMK4 and ICT-DCWB)
DESCRIPTION
12VDC Input
24VDC Input
48VDC Output
Sine Wave Series 1500 Watt Inverter, 115VAC output, no options installed.
ICT1500-12SW
ICT1500-24SW
ICT1500-48SW
Inverter with factory-installed transfer relay
ICT1500-12SWT
ICT1500-24SWT
ICT1500-48SWT
Inverter with factory-installed TCP/IP Ethernet communications port
ICT1500-12SWC
ICT1500-24SWC
ICT1500-48SWC
Inverter with factory-installed transfer relay and TCP/IP Ethernet
ICT1500-12SWTC
ICT1500-24SWTC
ICT1500-48SWTC
19” Rack Mount Kit, holds two Sine Wave Series inverters
ICT-RMK4
DC Wiring Junction Box with 5 electrical knockout positions
ICT-DCWB
To order any model without front AC outlets installed
Add modification no. M100185 behind the model number when ordering
ICT logos and slogans © copyright Innovative Circuit Technology Ltd. Specifications subject to change without notice.
Page 2
Innovative Circuit Technology Ltd.
26921 Gloucester Way, Langley, BC, Canada V4W 3Y3
Tel: 604-856-6303 | Fax: 604-856-6365 | Email: sales@ictcorporate.com | www.ict-power.com
800-152-000
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising