IPC-BX/M630(PCI) Series

Add to my manuals
5 Pages

advertisement

IPC-BX/M630(PCI) Series | Manualzz

Ver.1.12

Fanless, Ultra Low Voltage PentiumⅢ 800MHz

Box-PC 630 series

IPC-BX/M630(PCI) Series

OS

IPC-BX/M630(PCI)C -

IPC-BX/M630(PCI)CP Shared PCI slot x 2

IPC-BX/M630(PCI)C4P Shared PCI slot x 4

*

Specifications, color and design of the products are subject to change without notice.

Features

Equipped with the Low Voltage Intel(R) Pentium(R) III

Processor 800MHz (FSB 133MHz) CPU and memory conforming 256MB as standard

Fan-less operation achieved by natural air-cooling

High reliability and completely silent running (when fitted with the silicon disk from CONTEC)

Long, reliable supply (The CPU and chip set are embedded versions.)

Adoption of BIOS (Phoenix Technologies, Ltd.) customized by CONTEC to support the BIOS level

Other than the conforming PC I/F, equipped with the

PCMCIA (for CardBus), Audio (AC97 conforming),

100BASE-TX and RAS I/F as a standard

Equipped with a secondary-IDE connector to allow an optional external CD-ROM to be connected

DVI video output (VGA conversion adapter included)

Capable of starting up, even with the battery dead, using

CMOS data retained by EEPROM

IPC-BX/M630(PCI) Series is compatible with

IPC-BX/M600(PCW) Series

Supported OS

Windows 2000 Professional

Windows NT Workstation 4.0(SP6a)

Windows XP Embedded

Windows NT Embedded 4.0

These products are IBM PC/AT compatible, box computer designed for industrial use based on a low-power-consumption

CPU of the Low Voltage Intel(R) Pentium(R) III Processor, to operate as a completely nature-cooled (fanless) system. The box computer provides a variety of interfaces including the USB,

100BASE-TX, and RS-232C ports, capable of serving for a wide range of applications as a compact platform based on a general-purpose PC OS. As this series incorporates handpicked components such as the embedded types of CPU and chipset, it excels in environmental resistance and remains in stable supply for an extended period of time. You can therefore use the box computer under severe operating conditions such as

FA with ease.

* 2.5 inches hard disk drive (HDD) of our company has not guaranteed use by continuation and continuation power for 24 hours. When it is used by continuation operation and continuation power a life fails extremely. In the case of a 24-hours operation system, use of our company silicon disk drive (SDD) is recommended.

Functional Specifications

< 1 / 2 >

Model IPC-BX/M630(PCI)C IPC-BX/M630(PCI)C4P

CPU Low Voltage Intel(R) Pentium(R) III Processor, FSB133MHz

Chip set Intel(R) 815E

L2 Cache 512KB

Memory

Main memory

256 MB standard *1 / Max. 256MB (3.3V 144pin SO-DIMM PC133 Socket

× 2)

Video

BIOS

ROM

128KB E0000H - FFFFFH (Phoenix)

Controller Intel 815E (Built into the controller)

Video

RAM

Video

BIOS

Main memory shared

48KB (C0000H - CBFFFF)

Audio

Display I/F DVI-I 29pin *2

AC97 compliant

LINE IN:

φ3.5 Stereo mini jack

Full-scale input level 1.3Vrms(Typ.)

LINE OUT:

φ3.5 Stereo mini jack

Full-scale input level 1.0Vrms(Typ.)

MIC UN:

φ3.5 monaural mini jack

Full-scale input level 1.3Vrms(Typ.)

FDD I/F

IDE

HDD

I/F

Primary

Equipped with a dedicated 26pin, half-pitch connector: 2 modes

(Optional FDD: PC-FDD25BH)

Ultra DMA/100

2.5 inch IDE HDD or silicon disk drive: 1 internal unit

(One more unit can be added. Either of the two must be a silicon disk drive.)

Secondary

Equipped with a dedicated 40pin, half-pitch connector

(for connection of an optional CD-ROM) (right surface)

Serial I/F

PC card slot

RS-232C(general-purpose): 2ch (SERIAL PORT1,2) 9pin, D-SUB connector

RS-232C(touch panel): 1ch (SERIAL PORT3) [inside the DVI connector]

*3 *4

RS-422/485(general-purpose): 1ch (SERIAL PORT4) [inside the RAS connector] *4

Parallel I/F *4

I/F

LAN

Bi-directional, Centronics-compliant, 25pin D-SUB connector

Ethernet 100BASE-TX/10BASE-T RJ-45 connector

Controller Intel ICH2 integrated

PCMCIA Type I, II × 2 or III × 1 (Startup from ATA card not allowed)

CardBus correspondence

USB I/F

Keyboard I/F

Mouse I/F

General-purpose

I/O *4

2ch (USB 1.1)

PC/AT keyboard-compatible (6pin, MINI DIN connector)

PS/2-type mouse-compatible (6pin MINI DIN connector)

3 Optocoupler isolated inputs and outputs

(However, one output also serves as an external WDT output and one input also serves as remote reset. They become available when switched.)

IPC-BX/M630(PCI)C, IPC-BX/M630(PCI)CP, IPC-BX/M630(PCI)C4P 1

< 2 / 2 >

RAS function *4

RTC/CMOS

WDT: 1sec - 255sec (RESET or external output is allowed at time expiration)

Remote reset: External input signal

Expansion board slot None

Shared PCI slot × 2,

Installable board length

: 240mm (Max.)

Shared PCI slot × 4,

Installable board length

: 240mm (Max.)

Lithium backup battery life: 10 years or more

Input supply voltage

Automatically switched between 85 - 132 VAC and 170 - 265 VAC (47 -

63 Hz)

Current

Power consumption supply Expansion

50VA (Max.) board power-supply capacity

None

90VA (Max.)

+5V: 2A(1A x 2 Slot),

-5V: Not supplied,

+12V: 0.5A, -12V:

80mA

115VA (Max.)

+5V: 4A(1A x 4 Slot),

-5V: Not supplied,

+12V: 0.5A, -12V:

80mA

Physical dimensions

(mm)

262(W)×262(D)×55(H) 262(W)×262(D)×115(H) 262(W)×262(D)×180(H)

Weight Approx. 3.3kg Approx. 4.2kg Approx. 5.0kg

*1 A 256 MB memory module is plugged in one socket.

*2 The interface can connect the PC to a CONTEC Panel Link input type display (using an optional cable) or an ordinary analog RGB input display (using the bundled DVI-analog

RGB adapter).

*3 The interface is used for the CONTEC Panel Link or touch panel type display.

*4 Serial ports 3 and 4 can be used as general-purpose RS-232C ports by replacing the bracket(Bundled). In that case, the touch panel, RAS functions (WDT time-out output and remote reset input), RS-422/485, general-purpose inputs, and parallel interfaces are disabled.

Installation Environment Requirements

Allowable

Less than 20ms

Power supply instantaneous specifications power outage

One minute each for 3.0 kVAC (input-output), 2.0 kVAC

(input-FG), and 0.5 kVAC (output-FG)

Dielectric strength

Operating temperature

50M

Ω (DC500V)

0 - 50

°C(SDD in use)

5 - 45

°C(HDD in use)

5 - 45

°C(FDD in use)

Storage temperature -10 - 60

°C

Humidity *1 10 - 90%RH(No condensation)

Floating dust particles Not to be excessive

Corrosive gases None

AC line/

±2kV, Signal line/±1kV (IEC1000-4-4Level 3,

Line noise

Ambient specifications

Line-noise resistance

Static electricity

EN61000-4-4Level 3)

Contact discharge/

±4kV

(IEC1000-4-2Level 2, EN61000-4-2Level 2)

Atmospheric discharge/

±8kV resistance

(IEC1000-4-2Level 3, EN61000-4-2Level 3)

Vibration resistance

Sweep resistance

*2

10 - 57Hz/semi-amplitude 0.15mm 57 - 150Hz/2.0G

80 min. each in x, y, and z directions

(JIS C0040-compliant, IEC68-2-6-compliant)

Impact resistance *2

10G, half-sine shock for 11 ms in x, y, and z directions

(JIS C0041-compliant, IEC68-2-27-compliant)

Grounding Class D grounding (previous class 3 grounding)

*1 When a floppy disk is not in use.

*2 When the HDD and FDD are not in use.

List of Options

Memory for extension (144pin SO-DIMM)

PC-MSD256-144V 256MB SD memory module

Silicon disk drive for extension (IDE 2.5inch)

[PCI Board Type] For IPC-BX/M630(PCI)CP,C4P

PC-RSD1000-PCI 1GB silicon disk drive

PC-RSD2000-PCI 2GB silicon disk drive

PC-RSD4000-PCI 4GB silicon disk drive

PC-RSD8000-PCI 8GB silicon disk drive

Hard disk drive (IDE 2.5inch)

PC-HDD40G 40GB hard disk drive

Ver.1.12

Silicon disk drive (IDE 2.5inch)

PC-ESD500 512MB silicon disk drive

PC-ESD1000

PC-ESD2000

PC-ESD4000

PC-ESD8000

PC-ESD500-A

PC-ESD1000-A

PC-ESD2000-A

PC-ESD4000-A

PC-ESD8000-A

1GB silicon disk drive

2GB silicon disk drive

4GB silicon disk drive

8GB silicon disk drive

512MB silicon disk drive

1GB silicon disk drive

2GB silicon disk drive

4GB silicon disk drive

8GB silicon disk drive

Floppy disk unit

PC-FDD25BH 3.5inch floppy disk drive (comes with a cable)

Terminal block for connecting the RAS connector

IPC-PSD-20 Terminal block for connecting the RAS connector

TFT color liquid-crystal display

<Analog RGB types>

FPD-H21XT-AC

FPD-L21ST-AC

FPD-M21VT-AC

(15 inch 1024 x 768 dots, Panel mounted type)

(12.1 inch 800 x 600 dots, Panel mounted type)

(10.4 inch 640 x 480 dots, Panel mounted type)

<Panel Link types>

IPC-DT/H40X(PC)T (15.0inch 1024 x 768 dots, Panel mounted type) mounted type)

IPC-DT/L440(PC)TA (12.1 inch 800 x 600 dots,

Desktop/wall-mounted)

IPC-DT/L440(PC)TB (12.1 inch 800 x 600 dots,

Desktop/wall-mounted, anti-glare type)

Display cable only for DVI-D

IPC-DVI/D-020

IPC-DVI/D-050

DVI-D type display cable (2m)

DVI-D type display cable (5m)

Display cable only for PanelLink

IPC-DVIPL-020 DVI-PanelLink conversion display cable

IPC-DVIPL-050

(2m)

DVI-PanelLink conversion display cable

(5m)

CD-ROM/ DVD-ROM drive

IPC-CDD-03*3 CD-ROM/ DVD-ROM drive

IPC-CDC-03 CD-ROM/ DVD-ROM drive cable

Driver

IPC-SLIB-01 Driver & Utility Soft Set

(CD-ROM version) *1*2

Ferrite Core

*1 If your BOX-PC is an OS preinstalled model, the driver is supplied with the OS or already installed on the PC.

*2 You can download the driver from the Download Library

(http://www.contec.com/download) on the CONTEC web site. If you need IPC-SLIB-01

(CD-ROM version), it is available as a separately priced option.

*3 Please Purchase an optional cable for connection [IPC-CDC-03].

* Check the CONTEC’s Web site for the latest information on these options.

IPC-BX/M630(PCI)C, IPC-BX/M630(PCI)CP, IPC-BX/M630(PCI)C4P 2

Packing List

Main Body …1

AC Power Cable …1

DVI-Analog RGB Adapter …1

SERIAL3-4 Bracket …1

Set Angle …2

AC Power Cable Lock …1

Slot Cover (Only CP, C4P type)…2 ( 4 ) *1

PCMCIA Card Lock …1

Cramp …1

+- Pan-Head Screw with SW,W(M3×6)…7 ( 9 ) *1

+- Pan-Head Screw with SW,W(M4×8)…4

IPC-SLIB-01*2 (Driver & Utility Soft Set)…1

Recovery Media …1

Royalty consent contract …1

Setup procedure document …1

Using caution sheet …1

EU Declaration of Conformity for BX/M630 …1

Product guide …1

*1 The inside of a parenthesis shows C4P type.

*2 Products with Embedded OS don’t include IPC-SLIB-01.

* Users manual are not include.

Component Life

(1) Power supply ---Estimated life is about 10 years based on continual operation at 40°C (horizontal installation). However, (higher) operating temperatures will result in shorter life.

(2) Battery ---The internal calendar clock and CMOS

RAM are backed by a Lithium primary battery. The backup time at a temperature of 25°C with the power disconnected is 10 years or more.

* Replacement of expendables is handled as a repair (there will be a charge).

Physical Dimensions

IPC-BX/M630(PCI)C

IPC-BX/M630(PCI)CP

4-φ5

5 2-R

2.5

R5

.5

IPC-BX/M630(PCI)C4P

302

284

262

4φ5

5 2-R

2.5

R5

.5

302

284

262

302

284

262

Ver.1.12

[mm]

[mm]

4φ5

5 2-R

2.5

R5

.5

[mm]

IPC-BX/M630(PCI)C, IPC-BX/M630(PCI)CP, IPC-BX/M630(PCI)C4P 3

Ver.1.12

Component Name

IPC-BX/M630(PCI)C

TOP COVER

HDD LED RAS PRINTER SERIAL1 SERIAL2

POWER SW

MOUSE

LINE IN

LINE OUT

MIC

AC INLET

POWER LED DVI PCMCIA

Slot1,2

RESET UTP

(Ethernet)

USB FD KEYBOARD

IPC-BX/M630(PCI)CP

TOP COVER HDD LED RAS PRINTER Expansion slot(PCI) x 2

POWER SW

SERIAL1

SERIAL2

MOUSE

LINE IN

LINE OUT

MIC

AC INLET

POWER LED DVI PCMCIA

Slot1,2

RESET UTP

(Ethernet)

USB FD KEYBOARD

IPC-BX/M630(PCI)C4P

TOP COVER HDD LED RAS PRINTER Expansion slot(PCI) x 4

Expansion Slots (CP and C4P Model)

The CP model has two PCI bus expansion slots to hold PCI bus boards. The C4P model has four PCI bus expansion slots.

Board Dimensions Allowed

240mm(Max.)

CAUTION

A board that uses the back of the board edge connector

(the shaded area in the figure) may not be mounted.

Power Supply to Expansion Slots

The following table lists the voltage that can be supplied to a board in an expansion slot and the total current capacity of all slot:

<IPC-BX/M630(PCI)CP> <IPC-BX/M630(PCI)C4P>

Voltage Current capacity (Max.) Voltage Current capacity (Max.)

-5V Not supplied -5V Not supplied

POWER SW

SERIAL1

SERIAL2

MOUSE

LINE IN

LINE OUT

MIC

AC INLET

POWER LED DVI PCMCIA

Slot1,2

RESET UTP

(Ethernet)

USB FD KEYBOARD

Side view

IPC-BX/M630(PCI)C IPC-BX/M630(PCI)CP, C4P

CAUTION

Make sure that the total current consumption by the boards installed in the expansion slots does not exceed the above current capacity.

System Configuration

Printer

2.5inch hard (silicon) disk drive

Main memory

144pin SO-DIMM

IPC-BX/M630(PCI)CP

Buil

Secondary IDE connector

Component Function

LINE IN Line in (

φ3.5 PHONE JACK)

LINE OUT Line out (

φ3.5 PHONE JACK)

MIC Microphone input (

φ3.5 PHONE JACK)

KB Keyboard connector (MINI-DIN, 6pin)

MOUSE

SERIAL1

PS/2 mouse connector (MINI-DIN, 6pin)

Serial port 1 connector (9pin, male D-SUB)

SERIAL2

FD

USB

UTP

PCMCIA

DVI

PRINTER *1

RAS *1

Serial port 2 connector (9pin, male D-SUB)

Floppy disk drive connector (26pin, half-pitch connector)

USB port connector

Ethernet connector (RJ-45)

PCMCIA card slot <C, CP and C4P models>

DVI connector (29pin, DVI-I)

Parallel port connector (25pin, female D-SUB)

RAS function and RS-485 connector (15pin, female D-SUB)

SERIAL3 *1

SERIAL4 *1

RESET

Expansion slots

POWER

HDD

POWER SW

AC INLET

Serial port 3 connector (9pin, male D-SUB)

Serial port 4 connector (9pin, male D-SUB)

Hard reset push button

PCI expansion board slot x 2 <CP model>,

PCI expansion board slot x 4 <C4Pmodel>

Power ON indicator

Internal hard disk access lamp

Power switch

AC power supply input connector

SECONDARY IDE Secondary IDE connector (dedicated 40pin half-pitch connector)

* The two ports can be used as the PRINTER/RAS or SERIAL3 /4 ports using the bundled dedicated bracket.(factory settings: PRINTER, RAS)

IPC-BX/M630(PCI)C, IPC-BX/M630(PCI)CP, IPC-BX/M630(PCI)C4P

Panel Link compliant I/F LCD

*Using an optional DVI-Panel

Link conversion cable

General-purpose analog input display

*Using the bundled DVI-analog

RGB adapter

Display RAS

USB

LAN

RS-232C

LINE IN

MIC

Mouse

Keyboard

Dedicated FD Drive

PC-FDD25BH

PCMCIA card slot (C, CP and C4P models)

PCMCIA types I, II x 2, or III x 1

Expansion slot

(CP and C4P models)

When three or more slots are needed, select the C4P model. To use five or more slots or a full-size board, connect the FA-PA(PC) series.

PC-HELPER series

PCI full-size boards

Expansion bus adapter

FA-PAC(PC) series

Option CD-ROM

4

Installation Requirements

The BOX-PC can be installed in any orientation (1) - (3).

Avoid orientation (4) - (6) since it might not adequately dissipate heat. Similarly, to maintain the ambient temperature within the range specified in the specifications, ensure a clearance between the unit and surrounding equipment of at least 100mm for the top and rear and 50mm for the bottom and sides.

(1)

(2) (3)

Floor

(4)

Connectors

Ceiling

(5) (6)

Connectors

Distances between the BOX-PC and Its Vicinity

50mm or more (side)

50mm or more (side)

100mm or more (above)

50mm or more (back)

Connectors

IPC-BX/M630(PCI)C, IPC-BX/M630(PCI)CP, IPC-BX/M630(PCI)C4P

Ver.1.12

5

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement