General International 50-560A M1 12 Amp 10 in. Scoring Saw Specification
Below you will find brief information for Scoring Saw #50-560A. This manual describes a 10" scoring saw with a built-in sliding table and right tilt. It features a powerful main motor, a separate scoring motor, and a solid cast-iron table. The saw includes a quick release blade guard, precision rip fence system with 50" guide rails, and a crosscut fence. It also has an arbor lock for easy blade changes.
Advertisement
Advertisement
Advertisement
Key features
- Three saws in one design
- Built-in sliding table
- Separate scoring blade
- Quick release blade guard
- Solid cast-iron table
- Precision rip fence system
- Cross cut fence with angle indicator
- Arbor lock for blade changes
- Second operator's safety stop switch
Frequently asked questions
The main blade arbor diameter is 5/8” (16 mm).
The scoring blade arbor diameter is 20 mm.
The maximum depth of cut at 90° is 3 1/8” (80 mm).
The maximum crosscut capacity in front of the blade is 55” (1400 mm).
The sliding table dimensions are 59” x 11” (1500 x 320 mm).