October | November

October | November
100% NZ
OWNED
TRANSNET
HV JUICE
October | November 2013
S IG
P
RO
DE
W
PILLAR
LO
ECO
N
The NEW ERA
in Power
Distribution
F IL
E, U N
O B TR
IV
US
E
Raychem GelPort –
Now up to 300mm2
www.transnet.co.nz
CRSM-CT-M – Single Core Branch
Joint up to 300mm2
NEW
Pro
du
We are pleased to announce the release of the new
generation Raychem low voltage single core XLPE/
PVC branch joints; The CRSM-CT-M. This re-designed
range now offers solutions for cable sizes 25300mm² (main) and 16-35mm2 (service). This will
not phase out the existing CRSM-CT non mechanical
kits but simply give a mechanical option.
The new concept is based on the tried and proven
CRSM-CT kits which use heat shrink technology to
branch a single core service cable from a single
core main cable. The service cable is then run into
a pillar or TUD to feed a house or other residence,
we have simply included a UBR mechanical range
taking connector and a BOCL clip with additional
mastic for sealing the joint. The UBR connector
with single or double service tap ensures a reliable
branch connection for a single core service cable from a single core main cable. A branch off clip is provided to assist
with the environmental seal between the cables and a wraparound sleeve with thermo-sensitive paint is provided for
environmental and mechanical protection of the entire joint.
ct
FEATURES
CNSM Wraparound
Technology
Inclusion of USB
Mechanical Connector
Branch Off Clip (BOCL)
•
•
•
•
•
•
•
BENEFITS
Thermo-sensitive paint provides visual guide to assist with installation.
Superior mechanical protection.
Bi-Metal applications.
Fits solid, stranded, round and sector cable types.
Range taking ability allows better product offering and reduced inventory.
Reduced installation time.
Provides greater reliability when sealing between two cables.
This product was designed in order to eliminate the risk of using an
inappropriate connector and to remove the guess work by offering everything
required to make the connection in a complete package.
Watch out for the product installation video which will be made available in the
coming months. It will be accessed via a QR code on the label.
Product #
Single Service Double Service
Main Cable Service Cable
(mm2)
(mm2)
CRSM-CT1-M
CRSM-CT1-MD
25-95
16-35
CRSM-CT2-M
CRSM-CT2-MD
50-185
16-35
CRSM-CT3-M
CRSM-CT3-MD
185-300
16-35
Ph
0800 442 182
+64 9 274 3340
[email protected]
www.transnet.co.nz
www.transnet.co.nz
GELPORT – Now Up To 300mm2
RAYCHEM GELPORT – BIGGER AND BETTER! Strip the cable,
push it into the gel-filled cable port tighten the bolt and
close the cap – it really is that simple.
GelPorts use Raychem PowerGel to seal cable entry ports. A
sealing gel specifically developed for the electrical power industry,
it is hydrophobic and provides an excellent moisture seal over
a wide operating temperature range (-400C to 950C).
Up until recently the GelPort has been able to accommodate cables from
6-150mm2 and 16-240mm2, it can now accommodate cables up to 300mm2.
FEATURES
• 2 x Ports accommodate 185-300mm2, 1 x Port accommodates 16-185mm2
• Corrosion resistant
• No loose parts due to one piece housing
• Gel-filled cable entry ports provide a reliable cable seal
• Clear view back for fast, positive visual indication of wire position in connector
• Voltage range: 600V
• Tested up to 700A
PROVEN TOUGH
HINGE DESIGN
GEL SEALED SCREW
PORT CAP
NEW!
PROVEN ROBUST
LATCH DESIGN
CLEAR VIEW
BACK MAKES
INSTALLATION
EVEN EASIER
OUTER PORT
STRIP GUIDE
OUTER PORT
CENTRE PORT
SHIPPING
CAP
PRODUCT # GPRT-300-3P-OR
Ph
0800 442 182
+64 9 274 3340
[email protected]
www.transnet.co.nz
www.transnet.co.nz
NEW EP6 ECOPILLAR – The Safe One
INTRODUCING THE EP6 ECOPILLAR
The NEW ERA in POWER
DISTRIBUTION
GOOD VENTILATION
FLAME RETARDANT
PANELS
COVERED NEUTRAL BAR
A RANGE OF LOCKING
SYSTEMS AVAILABLE
USES FULLY INSULATED,
SUBMERSIBLE GELPORT
CONNECTORS FOR 2-3
LOOPING MAIN CABLES 16240mm2 OR 185-300mm2
GROUND LEVEL
INDICATION
EP6 ECOPILLAR
> FITS 10 X 63A FUSES OR
DIN SWITCHGEAR
> IF EXTRA SPACE IS REQUIRED,
STANDARD (10 FUSES) AND
TALL (20FUSES) UNITS HAVE
THE SAME FOOTPRINT
S IG N
> IMPROVE AESTHETICS OF
YOUR STREET
DE
PR
VE
LO
W
OFI
L E, U N O B T
S
RU
I
Contact customer service or
your local TransNet rep for more
information on how this unit could
work for your network.
Ph
> SAFELY AND QUICKLY
DISCONNECT, TEST AND
RECONNECT MAIN CABLE
0800 442 182
+64 9 274 3340
[email protected]
> KEEP PUBLIC SAFER WITH
CAPTURED BOLTS AND
SPECIAL LOCKING SYSTEM
ECO
ECO
PILLAR
> PROTECT WORKERS WITH
COVERED NEUTRAL BAR
> FULLY RECYCLABLE
PILLAR
www.transnet.co.nz
www.transnet.co.nz
END OF LINE DEALS –
Don’t Miss Out!!!
764 – 1000V DEPTH GAUGE SAW
For cable with sheet steel/aluminium sheathing
Adjustable stopper for adjustable cutting depth
Replaceable 24tpi saw-blade
Notched saw-blade for soft materials available separately
Fully insulated to EN60900 - 1000V maximum working
764
$90.00
+gst each
12KV COOPER BUSSMANN OIL FUSE LINKS
BS 2692-1 medium voltage fuses for use on the primary
circuit of three-phase 50Hz transformers in oil field
switchgear. Fitted with powerful pyrotechnic striker pin
Current Limiting 12kV Fuse Links for use in Oil Switchgear
Rated Voltage: 12kV
Rated Breaking Capacity: 40kA
12O range
Standard specifications: IEC 282-1/BS 2692-1/ESI 12-8
+gst each
Contact customer service for sizes available
$110.00
KME3 – PARROT BEAK CABLE CUTTER UP TO 500MM2
Large cable cutter for annealed copper and aluminium
conductors up to 500 mm2. ‘Parrot Beak’ blades do not
distort cable which inturn eases lugging.
Technical data
Length 805 mm
Weight 2.8 kg
KME3
$150.00
+gst each
Ph
0800 442 182
+64 9 274 3340
[email protected]
www.transnet.co.nz
www.transnet.co.nz
SUPER SPECIALS – Utility Essentials
VTT-4 Telescopic Hot Stick
TNHSFP House Service Fuse Puller
The VTT-4 triangular shape RITZGLAS® telescopic hot
stick boasts a universal end fitting, able to accept a wide
range of attachments so the stick can be used in a
multitude of different applications. Able to extend from
1.52m to 5.0m, this hot stick is an extremely versatile
tool. Assembled with epoxy-resin reinforced fibreglass
poles, the VTT-4 complies with ASTM F-1826/99 and
IEC 62193/03
Made of tough, UV stabilised plastic this tool
offers no risk if contacting live wires. With
the pigtail mould, it’s fast and easy to use,
simply line it up with the hole
in the fuse plug, screw it in and
pull the fuse plug out. The new
design allows for use with or
without a hotstick depending
on your current work
practises.
Features
• Fully insulated top section
• Triangular shape locks into place quickly
• Supplied with rubber ring and seal to
secure in place during transportation
• Comes with M4455-9 attachment
VTT-4
$300.00
+gst each
TNHSFP
$5.95
+gst each
VTT-7 Telescopic Hot Stick
MI3202 5kV Insulation Tester
The VTT-7 triangular shape RITZGLAS® telescopic hot
stick boasts a universal end fitting, able to accept a wide
range of attachments so the stick can be used in a
multitude of different applications. Able to extend from
1.68m to 9.14m, this hot stick is an extremely versatile
tool. Assembled with epoxy-resin reinforced fibreglass
poles, the VTT-7 complies with ASTM F-1826/99 and
IEC 62193/03
Five test voltages up to 5kV and 1TΩ resistance measuring
range cover most applications.
User friendly design is assured with a large LCD dispay. A
rugged carrying case provides mechanical robustness needed
for use in harsh environments.
Features
• Fully insulated top section
• Triangular shape locks into place quickly
• Supplied with rubber ring and seal to
secure in place during transportation
• Comes with M4455-9 attachment
VTT-7
$500.00
+gst each
0800 442 182
+64 9 274 3340
[email protected]
FEATURES
• Fast charging
• CAT IV, 600V
• Large LCD display with
backlight
• 5 preset test voltages
(250V, 500V, 1000V,
2500V & 5000V)
• High quality
accessories
included in standard set
STANDARDS
• Adheres to IEC &
EN standards
MI3202
$2500.00
+gst each
Ph
www.transnet.co.nz
www.transnet.co.nz
PORTABLE LED LIGHTS – Perfect
for Fault Situations
PORTABLE LIGHT STANDS – 400W
Using a bicycle foot pump, this temporary light stand extends
to 5 meters. It automatically locks in place at each extension
stage with locking pins.
The 400 watt LED light has a comparable lighting level to a
1000W metal halide.
The stand is very stable, and for added stability in poor weather
conditions, it is supplied with anchor pegs and strops.
This unit can be powered by mains, generator or your vehicles
battery (simply connect the inverter mounted inside of the
carry).
Extended
Height = 5m
Retracted
Height = 1.6m
LEDILS-5000 KIT INCLUDES:
• 400W LED light fitting
• Air extendable light stand
• Storage bag for stand, Tough plastic carry case for kit
• Bicycle foot pump
• Quick mount light bracket
• Carry/Storage bag
• Battery leads
• 400W inverter
TECHNICAL SPECIFICATIONS
LED Sources
Input Voltage
IP Rating
Dimensions
– Stand
– Packed in Carry Case
Weight
– Stand
– Packed in Carry Case
400W
230V AC
IP65
1.6m up to 5m when extended
LxWxH 80x52x32cm
17.85kg
32.85kg
BATTERY POWERED LED FLOODLIGHT –
10W & 20W
ECO
LIGHT
The perfect portable work light. Available in 10W and 20W,
this rechargable battery powered LED Floodlight on a
sturdy stand is a must have for all tradesmen.
FEATURES
•
•
•
•
•
•
120 Light beam
5000K Colour Temperature/Ra75
4hr Battery run time
Rechargable Li-Ion battery
IP65 rated
85~265V AC NZ power plug and
12–24V DC car plug chargers included
0
LEDFL-10WBATT
$99.00+GST
LEDFL-20WBATT
$155.00+GST
Ph
0800 442 182
+64 9 274 3340
[email protected]
www.transnet.co.nz
www.transnet.co.nz
TNERIB – Main Earth Inspection Box
STRONGER, SAFER, BETTER!
Designed by NZ contractors for NZ contractors! Improve the looks and integrity of your
main earth connection with the TransNet Main Earth Inspection Box.
Strengthened
Lid
Heavy Duty
Hinged Lid
Clear Description
Embossed on Lid
UV Stabilised
Material
Lid Latches Closed
Dimensions
120x120x200mm
TransNet New Zealand Ltd
Auckland
Wellington
TransNet Equipment Pty Ltd
Perth
TransNet Tonga
Tonga
20 Neilpark Drive
East Tamaki
Auckland
NEW ZEALAND
Ph 0800 442 182
Fax 0800 442 183
PO Box 39 383
Howick, Auckland
18 Sydney Street
Petone
Wellington
NEW ZEALAND
Ph 04 576 2530
Fax 04 576 0040
PO Box 39 383
Howick, Auckland
Unit 20, 8 Hurley Street
Canning Vale WA 6155
Perth
AUSTRALIA
Ph +61 8 9256 3417
Fax +61 8 9256 3917
PO Box 1439
Canning Vale DC WA 6970
Small Industries
Ma’ufanga
Tonga
Ph +67 627 939
Fax +67 627 976
[email protected]
NEW ZEALAND
[email protected]
[email protected]
AUSTRALIA
TONGA PO Box 2932
Nukualofa
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement