Premium 3D Glasses
Premium 3D
System / Glasses
For the greatest 3D experience,
Optoma introduce their 2nd generation
wireless 3D glasses…
Clear, bright 3D images with high contrast
Easy to use – Always in sync, with no
line-of-sight required
Lightweight and fully rechargeable
Keep your glasses looking brand new – cleaning cloth and soft bag provided
Hassle-free 3D with
wireless operation
Stylish, lightweight, foldable
design – only 39g
Full 3D
HD resolution to both eyes
using active 3D technology
One size for all – fits
over prescription glasses
Product Highlights
Developed in parallel with our “Full 3D” projectors, the
ZF2100 system is optimised to provide higher contrast
& brighter images than ever before, while eliminating
tedious issues with emitter placement, limited range
and potential interference commonly experienced when
using Infra-red.
Fully rechargeable, our ZF2100 glasses give you the
peace of mind that comes with knowing both installing
and using them will be hassle free.
ZF2100 System and glasses
3D Refresh rate
100/120/144Hz (50/60/72Hz per eye)
Dimensions (W x D x H)
160 x 160 x 55 (mm)
Battery Type
Rechargeable Lithium Polymer
Battery Life
Up to 15 Hours
Up to 40M (Dependent on environment)
Operating Conditions
0'C - 40'C
Display requirements
Projector / Display must have a “3D Sync”
connector (VESA DIN3)
Supported Projectors
HD83, HD33, HD300X, GT750
Supported Accessories
See Optoma website for details
Infra-Red (IR) Glasses
Crystal clear 3D image
Easy Set-up
ZF2100 System includes:
ZF2100 Emitter
vesa 3D-sync
Can easily lose sync
Difficult install
Interferes with remotes
ZF2100 Glasses includes:
Soft carry bag
& cleaning cloth
Soft carry bag
& cleaning cloth
Optoma Europe Ltd.
42 Caxton Way, Watford Business Park, Watford, Hertfordshire, UK.
WD18 8QZ
V1 - 20/08/12
Copyright © 2012, Optoma Europe Ltd. All other product names and company names used herein are for identification purposes only and may be trademarks or registered trademarks of their
respective owners. DLP®, BrilliantColor™ and the DLP logo are registered trademarks of Texas Instruments. All images of products are for representation purposes only. Whilst every care is taken
to provide accurate images of our products, actual products may differ slightly. Some product images may have been digitally altered by us to add an Optoma logo to the front panel. Optoma reserves
the right to amend or alter actual product or product images without notice. Some images may be simulated. Errors and omissions excepted, all specifications are subject to change without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF