Mobile bases

Mobile bases
Mobile Bases
ed
v
pro
SHOP FOX
ImHeavy-Duty Mobile Bases
®
SHOP FOX® Heavy-Duty Mobile Bases now
have thicker walled rectangular steel
tubing with two attachment bolts per
side, improved steel casters and gusseted
supports for superior strength!
D2057a
Heavy-Duty
Mobile Base
 Min. Dimensions: 19" x 20 1⁄2"
 Max. Dimensions: 29 1⁄2" x 29 1⁄2"
 700 lb capacity
These SHOP FOX® Mobile Bases have been
designed to give the user a stable and
mobile platform to mount machinery
and feature unlimited adjustability within
each size range. The heavy-duty casters
are arranged on outriggers, which allow
the machine to sit as low as possible
with maximum stability while providing
excellent maneuverability. The two-piece
retractable foot pads turn independently
from the knob for easy machine leveling
and provide a rock solid platform.
Three models to choose from for most
applications.
This is the
Strongest &
Best Selling
Mobile Base in
America!
Both D2057 and D2058
have been selected for
this prestigious award.
D2058a
D2260a
Super Heavy-Duty
Mobile Base
 Min. Dimensions: 10 1⁄2" x 141⁄2"
 Max. Dimensions: 17 1⁄2" x 211⁄2"
 600 lb capacity




Mini Mobile Base
Improved heavy-duty swivel
casters on two corners allow
excellent maneuverability
Metal
Casters
Min. Dimensions: 18 1⁄4" x 241⁄2"
Max. Dimensions: 28 1⁄2" x 33 1⁄2"
Metal casters
1300 lb capacity
Improved thick-walled rectangular tubing
Two-piece retractable foot pads turn
Low-profile, welded steel platform and
with two bolt attachment points for unlimited
independently from knob for easy
outrigger positioned casters provide
adjustability and greater rigidity
machine leveling and a rock-solid platform
extreme stability
Unsurpassed Strength & Mobility!
Our mobile bases are made with thick walled rectangular
tubing and welded construction for unsurpassed strength! Each
adjustable attachment point features two bolts that secure
through pre-tapped holes for quick assembly, and outrigger
caster mounts allow fixed casters to be attached in two
different directions, depending upon user preference.
D2058 shown holding up
5000 lbs during testing!
SHOPFOX.BIZ
23
Sanders
Horizontal/Vertical Belt Sander
SPECIFICATIONS:
♦ Motor: 1⁄3 HP, 110V, 4A, 3450 RPM
♦ Belt size: 4" x 36"
♦ Belt speed: 2100 FPM
♦ Precision cast aluminum tables (2)
♦ Quick change belt system
♦ Ball bearing construction
♦ Miter gauge included
♦ Powder coated paint
♦ Tilting platen
♦ Approximate shipping weight: 59 lbs.
W1717
Horizontal/Vertical
Belt Sander
Height
Adjustable
Tables
Heavy-Duty
Stand
Aluminum Oxide Sanding Belts – Comes in 2 Pks.
Size
60 Grit
80 Grit 100 Grit
120 Grit
150 Grit
180 Grit
220 Grit
4" x 36" D1249 D1250 D1251 D1252 D1253 D1254 D1255
10" Cast
Iron Disc
6" x 10" Combination Belt/Disc Sander
Belt Tilts 90°
Storage
Cabinet
Stand
2 Dust
Ports
SPECIFICATIONS:
♦ Motor: 1 HP, 110V/220V, single-phase, 14A/7A,,
3450 RPM, prewired 110V
♦ Precision ground cast iron table
♦ Belt size: 6" x 48"
♦ 10" Computer balanced cast iron disc
♦ Quick change belt release
♦ Belt speed: 1900 FPM
♦ Disc speed: 2420 RPM
♦ Cabinet style stand w/ powder coated paint
♦ Heavy-duty miter gauge
♦ Dust ports: 2 1⁄2" for disc and 2" for belt
♦ Ball bearing construction
♦ Approximate shipping weight: 168 lbs.
Multi-positional Cast Iron Table
W1676 Combination Sander
D2260A Mobile Base
Aluminum Oxide Sanding Belts – Comes in 2 Pks.
Size
60 Grit
80 Grit 100 Grit
120 Grit
150 Grit
180 Grit
220 Grit
6" x 48" D1256 D1257 D1258 D1259 D1260 D1261 D1262
Aluminum Oxide Sanding Discs – Comes in 2 Pks.
Diameter
10"
24
60 Grit
80 Grit 100 Grit
120 Grit
150 Grit
180 Grit
220 Grit
D1328 D1329 D1330 D1331 D1332 D1333 D1334
360-734-3482
Sanders
1HP, TEFC
Direct Drive
Motor
Precision
Ground Cast
Iron Table
12" Disc Sander
Includes
Miter Gauge
0 - 45°
Table Tilt
W1708 12" Disc Sander
D2056 Tool Table
SPECIFICATIONS:
♦ Motor: 1 HP, 110V, 10A, 1725 RPM
♦ Disc: 12" cast aluminum
♦ Table tilt: 0-45°
♦ Precision ground cast iron table
♦ Table size: 17 1⁄2"W x 8 1⁄4"D
♦ Ball bearing construction
♦ Powder coated paint
♦ Safety key operated switch
♦ 2" OD dust port
♦ Footprint: 13"W x 10"D
♦ Overall height: 13 1⁄2"
♦ Approx. shipping weight: 74 lbs.
Aluminum Oxide Sanding Discs – Comes in 2 Pks.
Size
12"
60 Grit
80 Grit 100 Grit
120 Grit
150 Grit
180 Grit
220 Grit
D1335 D1336 D1337 D1338 D1339 D1340 D1341
15" Disc Sander with Brake
Includes
Miter Gauge
+15° to -45°
Table Tilt
This stationary sander with its 15" disc is a real workhorse
in any shop. The large tilting cast iron table and rigid disc
platen produce true, flat edges from 45° to 90°. Great for
finishing long edges and end grain, or simply “working
to the line”, this Disc Sander will prove to be invaluable
for just about any situation. Features include X and Y axis
miter slots, cabinet stand with storage shelf, precision
ground cast iron tilting table and an electronic brake
system that stops the disc after power has been switched
off. You won't find a more versatile machine with this
quality and these features anywhere else!
SPECIFICATIONS:
♦ Motor: 1 1⁄2 HP, 220V, single-phase,
12A, 1725 RPM
♦ Disc: 15" PSA
♦ Table tilt: +15 to -45°
♦ Precision ground cast iron table
♦ Table size: 20" W x 12" D
♦ Floor to table height: 37"
♦ Ball bearing construction
Dual Miter Slot Cast Iron Table ♦ Powder coated paint
♦ Safety switch with disabling key
♦ Dust port: 2 1⁄2"
♦ Footprint: 26" W x 20 1⁄2" D
♦ Overall height: 46"
♦ Approx. shipping weight: 221 lbs.
Cabinet Stand with Storage
Shelving
W1815 15" Disc Sander
Aluminum Oxide Sanding Discs – Comes in 2 Pks.
Size
15"
60 Grit
80 Grit 100 Grit
120 Grit
150 Grit
180 Grit
220 Grit
D4183 D4184 D4185 D4186 D4187 D4188 D4189
SHOPFOX.BIZ
25
Sanders
6" x 80" Edge Sander
You will appreciate the balance this Edge Sander strikes between industrial-like quality and a compact size that won’t
hog precious shop space. Solid features like the graphite-coated cast iron platen, the precision-ground cast iron tables,
and the super stable powder-coated stand will make this edge sander a lifetime investment. Equally important, the
quick release belt tension lever makes changing belts a breeze and all controls are thoughtfully placed for convenient
access.
Quick Release
Belt Tension
Lever
Easy Belt Tracking
Adjustments
Graphite
Coated
Cast Iron
Platen
SPECIFICATIONS:
♦ Motor: 1 1⁄2 HP, single-phase, 110V/220V,
pre-wired to 220V
♦ Precision ground cast iron table
♦ Table size: 22" x 10 1⁄2"
Super Stable
♦ Table travel: 5"
Powder
♦ Belt size: 6" x 80"
Coated
♦ Belt speed: 1800 FPM
Stand
♦ Platen: 6 3⁄4" x 29 3⁄4", graphite coated
♦ Shielded & lubricated ball bearings
♦ Quick belt release
♦ Spring loaded table height assist
♦ Powder-coated paint
♦ Dust port: 4"
♦ Belt tracking and tension adjustment
♦ Approximate shipping weight: 297 lbs.
11⁄2 HP
Motor
Precision
Ground Cast
Iron Tables
Spring Assisted
Table Height
Adjustment
W1688 6" x 80" Edge Sander
6" x 80" Aluminum Oxide Sanding Belts - 2 Pk.
60 Grit
3.5" Diameter Drum & Cast Iron
Auxilary Table
26
80 Grit 100 Grit
120 Grit
D1263 D1264 D1265 D1266
360-734-3482
150 Grit
180 Grit
220 Grit
D1267
D1268
D1269
Sanders
6" x 89" Oscillating Edge Sander
This sander features a 6" x 89" belt that oscillates 3⁄4" vertically at fifty-two times per minute! It also has a quick-release belt tension
lever, a 0 to 90 degree tilting graphite-coated platen, and a 2 HP motor. The W1730 has a 26 7⁄8" x 12" cast iron main table for edge
sanding and a 10" x 11 1⁄2" cast iron auxiliary table for spindle sanding. Three non-oscillating spindle sanding drums, measuring
1 1⁄2", 2", and 3" in diameter are included for sanding smaller curved surfaces. Other features include a 180 degree adjustable miter
gauge, two 4" dust ports, a powder-coated finish, and a removable fence.
Features:
Specifications:
 Sanding belt oscillation stroke: 3⁄4"
 T-Slot table & miter gauge
 Motor: 2 HP, 220V, single-phase,
 Drive drum diameter: 7"
 Two 4" dust ports
1725 RPM
 Idler roller diameter: 3 7⁄8"
 Quick-release belt tension lever
 Precision ground cast iron tables
 Platen with graphite pad: 6 3⁄4" x 30 1⁄4"
 Graphite-coated platen
 Table size: 26 7⁄8" x 12"
 Oscillating sanding belt
 Table travel: 3 3⁄4" vertical, 5" horizontal  Platen tilt: 0° - 90° (5° scale)
 Shielded & permanently lubricated
 Aux. table size: 10" x 11 1⁄2", travel: 10"  3 spindle drums: 1 1⁄2", 2", 3" x 4 1⁄2" high
 Footprint: 22 1⁄2"W x 19 1⁄2"D
 Sanding belt size: 6" x 89"
ball bearings
 Approximate shipping weight: 443 lbs.
 Sanding belt speed: 3150 FPM
3 Spindle
Sanding Drums
11⁄2", 2", 3"
3
⁄4" Belt
Oscillation
Cover Swings
Out for Long
Boards
Removable End
Guards for Extralong Sanding
Magnetic
Switch
Storage
Cabinet
Stand
Made in
an ISO 9001
Factory
Edge Sander Pivots 90° for Horizontal
Sanding. Adjustible Auxilary Fence Included.
W1730 6" x 89" Oscillating Edge Sander
D2057 Heavy-Duty Mobile Base
D3741 Auxiliary Table w/ Dust Downdraft
Aluminum Oxide Hard Sanding Sleeves - 3 Pk.
D3741 Dust Collection Table (Not Included)
6" x 89" Aluminum Oxide Sanding Belts
Size
1 ⁄2" x 41⁄2"
1
60 Grit
80 Grit
100 Grit
120 Grit
150 Grit
2" x 41⁄2"
D3540
D3541
D3542
D3543
D3544
3" x 41⁄2"
60 Grit
80 Grit
100 Grit
120 Grit
150 Grit
D3360
D3365
D3370
D3361
D3366
D3371
D3362
D3367
D3372
D3363
D3368
D3373
D3364
D3369
D3374
SHOPFOX.BIZ
27
Sanders
Oscillating Spindle Sander
SPECIFICATIONS:
♦ Motor: 1 HP, 110/220V, pre-wired
110V, 12A, TEFC
♦ Precision ground cast iron table
♦ Ten spindle sizes: 1⁄4" x 5", 3⁄8" x 6",
1⁄2" x 6", 5⁄8" x 6", 3⁄4" x 9", 1" x 9",
1 1⁄2" x 9", 2" x 9", 3" x 9", 4" x 9",
tapered & threaded
♦ Table tilt: 45° front & 20° back
♦ Spindle speed: 1725 RPM
♦ Oscillation speed: 72 SPM
♦ Stroke length: 1 1⁄2"
♦ Powder coated paint
Heavy-Duty
♦ Dust port: 4" opening
Trunnion
♦ Steel table inserts
Assembly
♦ Footprint: 16" x 16"
♦ 100 grit sanding sleeve for each spindle
♦ Approximate shipping
weight: 333 lbs.
HUGE
271⁄2" X 271⁄2"
Precision Ground
Cast Iron Table
W1686 Oscillating Spindle Sander
D2260A Mobile Base
Oil
Immersed
Gears
Aluminum Oxide Hard Sanding Sleeves - 3 pk.
Size
(Dia. x Ht)
60 Grit
⁄4" x 5"
3
⁄8" x 6"
1
⁄2" x 6"
5
⁄8" x 6"
3
⁄4" x 9"
1" x 9"
11⁄2" x 9"
2" x 9"
D1400
D1405
D1420
D1425
D1440
D1455
D1475
D1490
3" x 9"
4" x 9"
D1500
D1505
1
80 Grit
D1401
D1406
D1421
D1426
D1441
D1456
D1476
D1491
100 Grit
D1402
D1407
D1422
D1427
D1442
D1457
D1477
D1492
120 Grit
D1403
D1408
D1423
D1428
D1443
D1458
D1478
D1493
150 Grit
D1404
D1409
D1424
D1429
D1444
D1459
D1479
D1494
10 Spindle
Sizes
1 HP
Motor
Aluminum Oxide Hard Sanding Sleeves - Each
D1501
D1506
D1502
D1507
D1503
D1508
D1504
D1509
6" x 12" Heavy-Duty Combination Sander
SPECIFICATIONS:
 Motor: 1 1⁄2 HP, 110V, 12A, single-phase, 1725 RPM
 Tables: Precision ground cast iron (2)
 Sanding belt size: 6" x 48"
 Disc: 12" (Disc is computer balanced cast aluminum)
 Belt release: Quick change
 Sanding belt speed: 878 FPM
 Disc speed: 1725 RPM
 Switch: ON/OFF toggle with safety key
 Stand: Cabinet style
 Heavy-duty miter gauge
 Powder coated paint
 Dust ports: 2" and 2 1⁄2"
 Ball bearing construction
 Approximate shipping weight: 178 lbs.
Made in
an ISO 9001
Factory
Direct Ball
Bearing Drive
Heavy-Duty
Miter Gauge
Tables Tilt
0 - 45°
W1712 Heavy-Duty Combination Sander
D2260A Mobile Base
Aluminum Oxide Sanding Belts – 2 Pk.
Size
60 Grit
120 Grit
150 Grit
180 Grit
220 Grit
6" x 48" D1256 D1257 D1258 D1259
80 Grit
100 Grit
D1260
D1261
D1262
Aluminum Oxide Sanding Discs – 2 Pk.
Diameter
12"
28
60 Grit
120 Grit
150 Grit
180 Grit
220 Grit
D1335 D1336 D1337 D1338
80 Grit
100 Grit
D1339
D1340
D1341
360-734-3482
2 Precision
Ground Cast
Iron Tables
Sanders
12" Benchtop Drum Sander
Finally, get the even sanding performance only a self-feeding drum sander can provide in a smaller shop sized unit. The 12" width
and 33⁄4" thick capacity handles most of the stock produced in any shop, which makes it the ideal machine for removing telltale
surface planer marks. Accepts hook and loop sanding rolls for easy installation and grit changes.
SPECIFICATIONS:
♦ Sanding motor: 11⁄2 HP, 18 Amp, 110V, single-phase
♦ Conveyor motor: 1⁄10 HP, 110V, single-phase
♦ Variable feed speed: 0-15 FPM
♦ Drum surface speed: 2300 FPM
♦ Maximum stock dimensions:
12" wide x 33⁄4" thick
♦ Minimum stock length: 8"
♦ Sanding drum size: 4"
♦ Sanding belt size: 3" x 72" hook & loop
♦ Dust collection port: 21⁄2" OD
♦ Footprint: 13 1⁄2" deep x 22 1⁄4" wide
♦ Approx. shipping weight: 160 lbs.
Two
Adjustable
Pressure
Rollers
D2275 Tool Stand
Hook & Loop
Sanding Drum
3" x 50' Sanding Rolls
60 Grit
D3162
80 Grit
100 Grit
120 Grit
150 Grit
D3546
D3163
D3547
D3164
Gear
Reduction
Table
Adjustment
Industrial-Duty
Conveyor Belt
Variable
Speed
Conveyor
Motor
W1740 12" Drum Sander
21⁄2" Dust
Collecton
Port
26" Dual Drum Sander
Whether quickly sanding large quantities of panel assemblies, or achieving “tear-out” free finishes on figured wood, the Model
W1678 will perform like a champ in even the most demanding shops. At a full 26" wide, this Dual Drum Sander can be fitted with two
different grits allowing both rough and finish sanding in one pass. Push aside your old hand sanders and make room for this one!
SPECIFICATIONS:
♦ Motor: 5 HP, 220V, 25 Amp, single-phase, 3450 RPM
♦ Capacity: 4 1⁄4" thick by 26" wide
♦ Feed rates: Variable (0-20 FPM)
♦ Conveyor motor: 1⁄3 HP, 60V DC, 2 Amp
♦ Conveyor table size: 26 1⁄8" x 30 1⁄4"
♦ Dual drum w/ hook & loop sandpaper attachment
♦ Powder coated paint & all ball bearing construction
♦ Minimum board length: 9"
♦ Minimum board thickness: 1⁄8"
♦ Surface speed of drums: 2300 FPM
♦ Sanding drums: Two 6" x 27 3⁄4", aluminum
♦ Dual 4" dust ports
Convenient
♦ Micro-adjustable rear drum
♦ Approximate shipping weight: 546 lbs. Multi-Function
5 HP
Motor!
2 Hook & Loop
Sanding Drums
MicroAdjustable
Rear Drum
Control Panel
w/ Amp Meter
W1678 26" Drum Sander
D2058A Super Heavy-Duty Mobile Base
D2246A Mobile Base Extension Bars
3" x 50' Sanding Rolls
60 Grit
D3162
80 Grit
100 Grit
120 Grit
150 Grit
D3546
D3163
D3547
D3164
SHOPFOX.BIZ
29
Sanders
37" Dual Drum Sanders
Designed for production shops, these 37" sanders have what it takes to get those big jobs done—fast. Sand panels and boards up to
4" thick and 36 1⁄2" wide with the dual 6" sanding drums. Feed speed is adjustable from 6 to 18 FPM. The variable speed knob and
amp meter make it easy to monitor sanding load. Other great features: a hinged hood, an emergency stop bar, pedestal-mounted
controls, four 4" dust ports, and either a 10 HP, 220V single-phase or 15 HP, 220V/440V 3-phase motor.
SPECIFICATIONS
Sanding drum motor: (W1772) 10 HP,
220V, single-phase or (W1773) 15 HP,
220V/440V*, 3-phase, TEFC, 1725 RPM
Conveyor motor: 1⁄3 HP
Maximum board width: 36 1⁄2"
Maximum board thickness: 4"
Minimum board length: 9"
Minimum board thickness: 1⁄16"
Surface speed of drums: 2800 FPM
Conveyor feed rate: Variable, 6 - 18 FPM
Sanding drums: 2, steel/rubber
Drum diameter: 6"
Dust ports: 4, 4"
Sandpaper width: 6"
Overall size: 49"H x 68"W x 50 1⁄2"D
Approximate shipping weight: 1370 lbs.
Dual Sanding Drums
State-of-the-art
Computer Balanced
Drums
Control Panel
with Amp Load
Meter
Hinged Hood
Industrial
Rubber
Conveyor Belt
(similar to wide
belt sander
belts)
Variable Speed
Conveyor Control Box
Double V-belt Drive
W1772 37" Sander, 10 HP, Single-Phase
W1773 37" Sander, 15 HP, 3-Phase
6" x 50' Sanding Rolls
60 Grit
D3881
30
80 Grit
100 Grit
120 Grit
150 Grit
180 Grit
D3882
D3883
D3884
D3885
D3997 D3998
220 Grit
*440V operation requires purchase
of additional components
360-734-3482
Sanders
15" Open End Wide-Belt Sander
This Open End Wide-Belt Sander will sand panels up to 30" wide with half the footprint of comparable wide-belt sanders. Features
include pneumatic belt tensioning, amp/load meter and adjustable support bar.
30" Sanding
Capacity
SPECIFICATIONS:
 Sanding motor: 5 HP, 220V, 30A, singlephase
 Sanding motor speed: 1725 RPM
 Feed motor: 1⁄4 HP, 220V, 18A
 Belt speed: 2,050 FPM
 Feed rates: 13 and 16 FPM
 Maximum sanding width: 15" x 2
 Maximum sanding thickness: 51⁄2"
 Minimum stock length: 12"
 Minimum stock thickness: 1⁄8"
 Sanding belt size: 16" x 48"
 Required air pressure: 75 PSI @ 2 CFM for
belt tracking
 Dust port: 5"
 Footprint: 29" wide x 23 1⁄2" deep
 Height with dust port: 62"
 Approximate shipping weight: 914 lbs.
Amp/Load
Meter
Adjustable
Platen
Pneumatic Belt
Tensioning,
Tracking &
Oscillation
Pull Out
Support Bar
Included
Made in
an ISO 9001
Factory
Built-In
Regulator &
Filter
W1689 15" Wide-Belt Sander
D3003 15" x 20" Belt Cleaning Pad
18" Open End Wide-Belt Sander
Eighteen inches is plenty wide enough for most sanding applications, but if you need more capacity, just flip the workpiece around for a total
sanding capacity of 36". The open end design with heavy casting and counterbalanced motor position provides sanding flexibility, without
sacrificing rigidity. Variable speed conveyor feed, pneumatic belt tracking and oscillating belt ensure the very best results possible.
SPECIFICATIONS:
 Sanding motor: 3 HP, 220V AC, 14 Amp,
single-phase
 Sanding motor speed: 1725 RPM
 Feed motor: 1⁄10 HP, 220V DC
 Surface speed of sanding drum:
1,850 FPM
 Conveyor feed rate: 5-17 FPM
 Maximum sanding width: 18" x 2
 Maximum sanding thickness: 6"
 Minimum stock length: 6"
 Minimum stock thickness: 1⁄4"
 Sanding belt size: 19" x 48"
 Required air pressure: 57 PSI
 Dust port: 4"
 Footprint: 25" wide x 17 1⁄2" deep
 Height with dust port: 621⁄2"
 Approximate shipping weight: 450 lbs.
Features:
 Variable Speed Conveyor Feed
 Pneumatic Belt Tracking
 Emergency Brake System
 Spring Belt Tensioning System
 Amp Load Meter
36" Sanding Capacity!
Counterbalanced
Motor and
Control Panel
Heavy-Duty
Cast Iron
Support
Column with
Dovetailed
Way
W1813 18" Open End Wide-Belt Sander
D3003 15" x 20" Belt Cleaning Pad
19" x 48" Aluminum Oxide Belts
60 Grit
D4168
80 Grit
100 Grit
120 Grit
D4169
D4170
D4171 D4172
150 Grit
SHOPFOX.BIZ
31
Sanders
20" Wide-Belt Sander with 71⁄2 HP Motor
This compact Wide-Belt Sander has digital controls and readout for setting your sanding depth automatically. Other features
include a quick change belt system with automatic belt tensioning, motorized table elevation control, adjustable photo-electric belt
oscillation system and sanding load meter.
Automatic Belt
Tensioning
Digital Readout
& Controls
Made in
an ISO 9001 SPECIFICATIONS:
Factory
 Sanding motor: 7 1⁄2 HP, 220V, 40 Amp, single-phase
 Sanding motor speed: 1725 RPM
 Feed motor: 1⁄2 HP, 220V, 3.8 Amp, single-phase
 Feed motor speed: 1725 RPM
 Elevation motor: 1⁄3 HP, 220V, 3 Amp, single-phase
 Elevation motor speed: 1725 RPM
 Drum speed: 3550 FPM
 Drum diameter: 7 13⁄16"  Belt size: 20 1⁄2" x 48"
 Feed rates: 16.4, 23, 32.8 FPM
 Max. sanding width: 20"  Max. sanding thickness: 6"
 Min. stock length: 9"  Min. stock thickness: 1⁄8"
 Required air pressure: 57 PSI @ 2 CFM
 Dust port: 4"  Footprint: 311⁄4" wide x 16 1⁄2" deep
 Height with dust port: 60 1⁄4"
 Approximate shipping weight: 1025 lbs.
Sanding
Load Meter
Adjustable
Photo-Electric
Belt Oscillation
System
Manual &
Motorized
Table Elevation
Control
Air Controlled
Emergency Stop
Disc Brake
W1709 20" Wide-Belt Sander
D3003 15" x 20" Belt Cleaning Pad
201⁄2" x 48" Aluminum Oxide Belts
Built-In
Regulator &
Filter
60 Grit
80 Grit
100 Grit
120 Grit
150 Grit
180 Grit
220 Grit
D3305 D3306 D3307 D3308 D3309 D3310 D3311
24" Wide-Belt Sander with 10 HP Motor
Numeric control pad and digital readout provide the ultimate in precision. Other features include quick-change belt system
with automatic belt tensioning, air-controlled automatic belt tracking system, motorized table elevation control, adjustable
air-controlled belt oscillation system and load meter.
SPECIFICATIONS:
Sanding
Load Meter
Digital
Readout &
Controls
10 HP Main
Motor!
Made in
an ISO 9001
Factory
Manual &
Motorized
Table
Elevation
Control
Emergency
Stop Bar
 Sanding motor: 10 HP, 220V, 50 Amp, single-phase
 Sanding motor speed: 1725 RPM
 Feed motor: 1 HP, 220V, 7 Amp, single-phase
 Feed motor speed: 1725 RPM
 Elevation motor: 1⁄3 HP, 220V, 3 Amp, single-phase
 Elevation motor speed: 1725 RPM
 Drum speed: 3,550 FPM
 Drum diameter: 7 7⁄8"
 Feed rates: 143⁄4 - 49 FPM
 Max. sanding width: 24"
 Max. sanding thickness: 6"
 Min. stock length: 10"
 Min. stock thickness: 1⁄8"
 Required air pressure: 57 PSI @ 7 CFM
 Sanding belt size: 25" x 60"
 Dust port: (2) 4"
 Footprint: 39 1⁄4" wide x 19 1⁄4" deep
 Height with dust ports: 71"
 Approximate shipping weight: 1450 lbs.
W1710 24" Wide-Belt Sander
D3003 15" x 20" Belt Cleaning Pad
25" x 60" Aluminum Oxide Belts
60 Grit
80 Grit
100 Grit
120 Grit
150 Grit
D3312 D3313 D3314 D3315 D3316
32
360-734-3482
180 Grit
220 Grit
D3317
D3318
Sanders
25" Wide-Belt Sander with 71⁄2 HP Motor
A platen between two rollers provides uniform sanding pressure across the length and width of every board for the ultimate
sanded finish every time. Front mounted controls and a digital load meter make this wide-belt sander easy to operate with full
capacities that handle everything but the widest glue-ups.
SPECIFICATIONS:
 Sanding motor: 7 1⁄2 HP, 220V, single-phase
 Sanding motor speed: 1725 RPM
 Feed motor: 1⁄4 HP
 Sanding belt speed: 2050 FPM
 Feed rates: 13 and 16 FPM
 Maximum sanding width: 25"
 Maximum sanding thickness: 5 3⁄4"
 Minimum stock length: 12"
 Minimum stock thickness: 1⁄8"
 Sanding belt size: 26" x 48"
 Required air pressure: 75 PSI
 Dust port: (2)5"
 Footprint: 37 1⁄4" wide 241⁄2" deep
 Height with dust port: 65 5⁄8"
 Approximate shipping weight: 1219 lbs.
Digital Readout
Sanding
Load Meter
Emergency
Stop Bar
Rack and Pinion Table
Elevation Mechanism
Made in
an ISO 9001
Factory
Built-In
Regulator &
Filter
Adjustable Platen
W1751 25" Wide-Belt Sander
D3003 15" x 20" Belt Cleaning Pad
26" x 48" Aluminum Oxide Belts
60 Grit
80 Grit
180 Grit
220 Grit
D3667 D3668 D3669 D3670 D3671 D3672
100 Grit
120 Grit
150 Grit
D3673
SHOPFOX.BIZ
33
Sanders
37" Wide-Belt Sanders with 15 HP Motor
Door builders and cabinet shops will love the extra capacity of these 37" wide-belt sanders. Available with 15 HP, 3-phase or 10
HP, single-phase sanding motors, these wide-belts are built for daily industrial use with features such as a heavy-duty steel cabinet,
pneumatic belt oscillation, and a built-in air filter/regulator. The digital control pad automates table adjustments and is accurate to
0.005". Also, the variable speed conveyor, adjustable oscillation controls, and adjustable graphite/felt platen easily allow the operator
to “tweak” the sander to achieve soft, smooth finishes on all types of wood.
SPECIFICATIONS:
 Sanding motor: 15 HP, 220/440V*,
3-phase, 36/18 Amp, 1725 RPM, 60 Hz
cycle, triple V-belt drive, or 10 HP, 220V,
single-phase, 50 Amp, 1725 RPM, 60 Hz
cycle, triple V-belt drive
Sanding
 Conveyor motor: 1 HP, 220/440V,
Load
3-phase, 3.4/1.7 Amp, 60 Hz cycle,
Meter
variable speed belt/gearbox, or 1 HP,
220V, single-phase, 7 Amp, 60 Hz cycle,
variable speed belt/gearbox
 Table elevation motor: 1⁄4 HP, 220/440V,
3-phase, 1.2/0.6 Amp, 1,725 RPM, 60
Hz cycle, V-belt power transfer, or 1⁄3 HP,
220V, single-phase, 3.6 Amp, 1725 RPM,
60 Hz cycle, V-belt power transfer
Manual &
 Maximum board width: 36 1⁄2"
Motorized
 Maximum board thickness: 6"
Table
 Minimum board length: 14"
Elevation
 Air requirements: 75 PSI
Control
 Surface speed of drums: 2565 FPM
 Conveyor feed rate: Variable, 15-49 FPM
 Overall dimensions: 69 5⁄8"H x
52 1⁄8"W x 49 3⁄8"D
 Approximate shipping
Emergency
weight: 1786 lbs.
10 HP or 15 HP
Main Motor!
3 Dust
Ports
Made in
AN ISO 9001
Factory
Digital
Readout &
Control!
Stop Bar
FEATURES:
 Built in air filter/regulator
 Independent motor control
 Pneumatic belt tracking and tensioning
 Amp meter for load measurement
 Emergency stop bar
 Digital readout and control panel
 (3) 4" dust ports
Manual Height
 Steel cabinet
Adjustment
 Steel outfeed drum
 Rubber infeed drum
 Rubber pressure drums
 Micro-adjustable graphite/felt platen
Adjustable Platen
Pneumatic Oscillation Control
W1737 37" Wide-Belt Sander, 10 HP, Single-Phase
W1738 37" Wide-Belt Sander, 15 HP, 3-Phase
D3003 15" x 20" Belt Cleaning Pad
34
37" x 60" A.O. Belts
60 Grit
80 Grit
100 Grit 120 Grit 150 Grit
D3550 D3551 D3552D3553D3554
*440V operation requires purchasing additional components
360-734-3482
Sanders
43" Wide-Belt Sander with 25 HP Motor
This wide-belt sander was built for woodworkers who
need the complete control of a felt platen for feather
and hard-roller sanding. With all of the most important
features that have been proven effective over the years,
this machine will deliver great workpiece finishes quickly
and consistently.
Made in AN
ISO 9001 Factory
SPECIFICATIONS:
 Sanding belt motor: 25 HP, 220V/440V*, 3-phase, 64/32A
 Belt feed motor: 2 HP, 220V/440V*, 3-phase, 6/3A
 Table elevation motor: 1⁄4 HP, 220V/440V*, 3-phase, 1.2/0.6A
 Pressure roller type (double): Rubber
 Infeed drum: Spiral Grooved Rubber
 Outfeed drum: Steel
 Sanding drum diameter (each): 4"
 Platen: Micro adjustable graphite/felt
 Sanding belt size: 43" x 60"
 Maximum board dimensions: 43"W x 6"H
 Minimum board length: 14"
 Conveyor speeds: Variable, 14-60 FPM
 Surface speed of drums: 2200 FPM
 Approximate shipping weight: 2574 lbs.
FEATURES:
 Convenient control panel with separate
switches for each motor
 Amp meter load sensing system
 Disc brake system for emergency stops
 Double infeed and outfeed pressure rollers
 Fast belt changes (takes less than 30 seconds!)
 Pneumatic sanding belt oscillation control
 Digital readout to within 0.005"
 Variable feed speeds
 (5) 4" dust ports
W1756 43" Wide-Belt Sander
D3003 15" x 20" Belt Cleaning Pad
43" x 60" Aluminum Oxide Belts
60 Grit
80 Grit
100 Grit
120 Grit
150 Grit
D3874 D3875 D3876 D3877 D3878
180 Grit
220 Grit
D3879
D3880
43" Double Head Wide-Belt Sander with 25 HP Motor
Double heads, triple benefits! Take advantage of three
types of sanders in one. You have the feathering benefits
of a platen type sander, the surfacing benefits of a drum
type sander, and the surface removal and time saving
benefits of a dual-grit double drum sander.
SPECIFICATIONS:
 Sanding motor HP: 25 HP, TEFC, 220V/440V*, 3-phase, 64/32A
 Conveyor motor HP: 2 HP, TEFC, 6.5/3.3A
 Table lift motor HP: 1⁄4 HP, TEFC, 1.2/0.6A
 Footprint: 61" x 31"
Made in
 Maximum board width: 43"
 Maximum board thickness: 6" AN ISO 9001
 Minimum board length: 14"
Factory
 Minimum board thickness: 1⁄4"
 Front drum surface speed: 3543 FPM
 Rear drum surface speed: 2565 FPM
 Conveyor speed: 14-60 FPM
 Sanding belt size: 43" x 60"
 Overall size: 66 1⁄4"W, 85 1⁄4"H, 63"D
Two Sanding Heads
 Approx. shipping weight: ,384 lb
with Platen
FEATURES:
 Steel cabinet
 Hard rubber infeed drum, adjustable platen on rear drums
 Adjustable graphite/felt platen
 Digital encoder depth control
 Disc brake for emergency stop
 Rubber pressure rollers
 Amp/load meter
W1757 43" Wide-Belt Sander
 Variable speed
D3003 15" x 20" Belt Cleaning Pad
 (10) 4" dust ports
43" x 60" Aluminum Oxide Belts
60 Grit
80 Grit
100 Grit
120 Grit
150 Grit
D3874 D3875 D3876 D3877 D3878
180 Grit
220 Grit
D3879
D3880
*440V operation requires purchasing additional components
SHOPFOX.BIZ
35
Dust CollectORS
Fine Air Filter
This is one machine that will sit in the shop and gather dust. Fine dust that is. With its threespeed fan, automatic shut-off and 0.3 micron filter, this Fine Air Filter circulates shop air and
captures the finest airborn dust. Even with an efficient dust collector, if other machines are
making dust, you need the Fine Air Filter.
SPECIFICATIONS:
♦ Motor: 120V, 60Hz
♦ Filter size: 131⁄4" x 141⁄4" x 11⁄4"
♦ Standard filtration: 0.3 microns
♦ Fan sound rating: 42 dB
♦ Fan speeds: 3 (100, 140 & 200 CFM)
♦ Automatic timed shut-off
♦ Fan off delay: 4 settings
♦ Approximate shipping weight: 18 lbs.
W1746 Fine Air Filter
D3615 Replacement Filter
Filter Captures Fine Dust
Deluxe Ceiling Mounted 3-Speed Air Cleaner
An essential machine for any health consious shop, you can rest easy knowing that this little guy is filtering out the tiny dust
particles that can raise big health concerns.
Up to 1,044 CFM
Auto Shut-Off
SPECIFICATIONS:
Timer
♦ Motor: 1⁄5 HP, 115V, 1725 RPM, single-phase
3 Motor
1 Micron Air
♦ Motor amperage: 2 amps, 2 1⁄2 amps, 3 amps
Speeds
Filtration
♦ 3 Motor speeds: 750, 960, 1200 RPM
♦ Fan sound rating: 62 dB, 67 dB, 69 dB
♦ Air flow: 556 CFM, 702 CFM, 1044 CFM
♦ Primary filter: 5 micron, pleated type
♦ Secondary filter: 1 micron, bag type
♦ Unit dimensions 30 1⁄4" L x 24 1⁄8" W x 12 1⁄8" H
♦ Approximate shipping weight: 78 lbs.
W1690 Air Cleaner
D3209 1 Micron Inner Filter
D3210 5 Micron Outer Filter
Includes
Remote
Control
SHOP FOX® Bench Top Downdraft Tables
These Bench Top Downdraft Sanding Tables provide a simple and economical
solution to capturing the dust created by portable hand sanders. Low profiles allow
these sanding tables to sit on top of the workbench during sanding operations and
then store out of the way when not needed. Internal baffles & slotted table surface
maximize air movement and dust control. Non skid top and feet.
W1734
15" Downdraft Table
W1734 FEATURES:
 Overall size: 15" W x 25" L x 5" H
 2 1⁄2" Dust port
 Approximate weight: 13 lbs.
W1733 FEATURES:
 Overall size: 20" W x 40" L x 6 1⁄4" H
 4" Dust port
 Approximate weight: 29 lbs.
36
W1733
20" Downdraft Table
360-734-3482
Dust CollectORS
1 HP Dust Collector
800 CFM
Aluminum
Finned TEFC
Motor
Handle & Casters
for Portability
Made in
an ISO 9001
Factory
SPECIFICATIONS:
 Motor: 1 HP, 110V/220V, single-phase
 Motor amp draw: 9/4.5
 Air suction capacity: 800 CFM
 Static pressure: 5.67"
 Number of 4" intake holes: 1
 Impeller: 9" balanced steel, radial fin
 Bag capacity: 2.1 cubic feet
 Portable base size: 15 3⁄4" x 39 3⁄4"
 Bag size (dia. x depth): 14 3⁄4" x 24 3⁄8" (2)
 Standard bag filtration: 2.5 micron
 Powder coated paint
 Height with bags inflated: 54 1⁄2"
 Approximate shipping weight: 59 lbs.
W1727 1 HP Dust Collector
D3545 Replacement Lower Bag
11⁄2 & 2 HP Dust Collectors
SPECIFICATIONS:
♦ Motor size: 11⁄2 HP, 110V, single-phase, 16A, 3450 RPM (W1685)
♦ Motor size: 2 HP, 220V, single-phase, 12A, 3450 RPM (W1666)
♦ Portable base size: 211⁄2" x 331⁄2"
1,280 CFM (W1685) &
♦ Bag volume: 5.4 cubic feet
1,550 CFM (W1666)
♦ Static pressure: 10.1" (W1685), 12.8" (W1666)
♦ Height (with bags inflated): 78"
♦ Air suction capacity: Approx. 1280 CFM (W1685),
Heavy-Duty
1550 CFM (W1666)
12" Impeller
♦ Impeller: Balanced steel, radial fin 12"
♦ 6" inlet has a removable "Y" fitting
W1685 11⁄2 HP Dust Collector
w/ two 4" openings
6" Inlet
♦ Standard bag filtration: 30 micron
W1666 2 HP Dust Collector
or 2 - 4"
♦ Approximate shipping weight: 108 lbs.
D1795 Replacement Upper Bag
Inlets
D1796 Replacement Lower Bag
D3116 2.5 Micron Oversized Bag, 18" x 40"
3 HP Dust Collector
2,830 CFM
Dual
Collection
Bags
SPECIFICATIONS:
♦ Motor: 3 HP, 220V, single-phase, 3450 RPM, 18 Amp
♦ Impeller: 13" balanced steel radial fin
♦ Maximum inlet size: 8"
♦ Inlet adapter: 4-way x 4" inlets
♦ Air suction cap.: Approx. 2830 CFM
♦ Static pressure: 14.4"
♦ Bag size (Dia. x depth): 19" x 33" (4)
Made in
♦ Height (with bags inflated): 78"
an
ISO 9001
♦ Bag volume: 10.8 Cubic Feet
Factory
♦ Standard bag filtration: 30 micron
♦ Approximate shipping weight: 167 lbs.
13"
Impeller
One 8" or Four 4"
Inlets for Multiple
Machines
W1687 3 HP Dust Collector
D1795 Replacement Upper Bag
D1796 Replacement Lower Bag
D3116 2.5 Micron Oversized Bag, 18" x 40"
SHOPFOX.BIZ
37
CYCLONE Dust CollectORS
Cyclone Dust Collectors
Our cyclone dust collection systems are built tough for
dependability and designed for efficient collection, separation
and filtration. Heavy-duty cyclone chambers and precisely
engineered airflow systems separate large chips and fine dust
for convenient removal. Other features include, internal brush
mechanism for easy-to-clean canister filters, and electronic
timers.
Orange = Super Fine Dust
Blue = Dust & Chips
11⁄2 HP Portable Cyclone
This Portable Cyclone with its 1 1⁄2 HP motor generates 806 CFM of air movement
with a maximum static pressure of 10.4". Collected dust is easy to manage with
the 20 gallon drum with casters and plastic bag liners. There's even a lever and
cable lid-raising mechanism to make collection drum emptying a cinch. The 2.0
micron pleated filter also has an internal cleaning paddle to keep the filter at peak
performance. If that's not enough, this dust collector comes with a remote control for
convenient power control anywhere in the shop.
SPECIFICATIONS:
♦ Motor: 1 1⁄2 HP, 110⁄220V, pre-wired 110V,
single phase, Class E induction
♦ RPM: 3450
♦ CFM: 806
♦ Maximum static pressure: 10.4"
♦ Dust port: (2) 4", (1) 6"
♦ Filter: 2.0 micron, pleated
♦ Drum: 20 gallon
♦ Footprint: 32" x 32" x 32"
♦ Overall height: 70 1⁄2"
♦ Approximate shipping weight: 146 lbs.
Features:
♦ Lever and cable lid raising mechanism
♦ Remote control
♦ Paddle for maintaining filter efficiency
♦ Rolling casters for mobility
♦ Compact design
♦ Back pressure hose for plastic drum liners
♦ Easy to clean and maintain
W1823 11⁄2 HP Cyclone Dust Collector
3 HP Low Profile Cyclone Dust Collector
Designed to go toe-to-toe against every dust collector in its class, this Low Profile Cyclone Dust
Collector goes one step further — it actually fits under a seven foot ceiling! So, if the others
don't fit, they're not collecting dust. Compare all the other specs and features and you'll agree,
this dust collector stands heads above the rest.
Crank Style Filter
SPECIFICATIONS:
Cleaning Brush
♦ Motor: TEFC Class "F", 3 HP, 220V, single-phase
Mechanism
♦ Amps: 22
♦ Cycle/RPM: 60 Hz / 3450 RPM
♦ Intake hole size: 8"
Only 80" Tall!
♦ Filter surface area: 113 sq. ft. each
1
♦ Impeller size: 15 ⁄2"
Remote Controlled
Magnetic Switch
♦ Air suction capacity: 1768 CFM @ 2.2" SP
♦ Maximum static pressure (inches of water): 14.3"
♦ Sound level: 83 dB
♦ Filter: Spun bond polyester, 99.9% efficiency from 0.2-2 microns
♦ Collection drums: 55 gallon, steel
55 Gallon
♦ Overall dimensions: 67" L x 44" W x 80" H
Collection Drum
with Casters
♦ Footprint: 67" x 44 "
♦ Stand: 14 gauge steel
♦ Cyclone body: 16 gauge steel
♦ Blower housing: 11 gauge steel
♦ Approx. shipping weight: 567 lbs.
Features:
♦ Steel collection drum with casters
♦ Remote controlled magnetic switch
♦ Class "F" motor
♦ Dual pleated filter with
cleaning brushes
♦ Cleaning flaps maximize
filter efficiency
♦ Includes stand & detailed
W1816 3 HP Cyclone Dust Collector
instruction manual
38
360-734-3482
3 HP
Motor
Heavy-Duty Stand
(included)
Scroll Saw / Wood Lathes
16" Variable Speed Scroll Saw
Variable speed control, extra cutting capacity and cast iron construction are the features most sought after in a Scroll Saw. This
Shop Fox® Scroll Saw also offers a gooseneck work light, dust blower and dust port, large 45° tilt table and easy blade changes.
Uses standard and pin end saw blades.
SPECIFICATIONS:
♦ 1⁄8 HP, 0.8 Amp., 110V, 60 Hz
♦ Variable speed motor
♦ No load speed: 550-1650 SPM
Cast Iron
Gooseneck
♦ Maximum cutting thickness: 2"
Uses Both
Construction
Work Light
Plain & Pin
♦ Maximum cutting width: 16"
Blades
♦ Cast iron table
♦ Blade stroke: 3⁄4"
♦ Approximate shipping weight: 40 lbs.
Dust Blower &
Dust Port
W1713 16" Variable Speed Scroll Saw
D2056 Tool Table
51⁄8" Scroll Saw Blades
Large 45°
Tilt Table
72-pc. Scroll Saw Blade Sets
D3399
#1 Beginner
Skip: 2/0, 02, 05, 07, 09 and 12
D3400
#2 Intermediate
Double: 03, 05, 07, 09, 11 and Reverse 07
D3401
#3 Advanced
Reversible: 03, 05, 07, and Precision Milled 03, 05, 09
Lathe Attachment
for Drill Press
Model
D3394
D3395
D3396
D3397
D3398
D3402
D3403
D3404
D3405
D3406
D3407
D3408
D3409
D3410
D3411
#
4
12
2/0
5
7
.008
.019
.018
2
5
7
9
2/0
2
4
Width Length TPI
.035
.062
.022
.037
.043
.078
.125
.110
.028
.039
.045
.053
.023
.028
.035
51⁄8"
51⁄8"
51⁄8"
51⁄8"
51⁄8"
51⁄8"
51⁄8"
51⁄8"
51⁄8"
51⁄8"
51⁄8"
51⁄8"
51⁄8"
51⁄8"
51⁄8"
Tooth
Tip Quantity
18
Skip
Plain
9.5
Skip
Plain
30
Skip.
Plain
12 Univ. Rev. Plain
12 Univ. Rev. Plain
25
Skip
Pin
10
Skip
Pin
15
Skip
Pin
23
Skip
Plain
16
Skip
Plain
14
Skip
Plain
14
Skip
Plain
52
Spiral
Plain
44
Spiral
Plain
36
Spiral
Plain
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
Benchtop Wood Lathe
SPECIFICATIONS:
♦ Motor: 1⁄3 HP, 4 Amp, 110V, 60 Hz
♦ Variable speed
♦ Spindle speed: 700-3,200 RPM
♦ 13" distance between centers
♦ 8" swing over bed
♦ Base mounting hole
size: 8mm
Infinitely
♦ Approx. shipping Variable
Speed
weight: 45 lbs.
Includes Two
Tool Rests
53⁄4" Faceplate
(included)
D2056 Tool Table
Standard Equipment:
♦ 3⁄4" x 16 TPI RH spindle
♦ MT #1 spur center
♦ MT #1 live center
♦ 41⁄4" and 7" tool rests
♦ 5 3⁄4" faceplate
Includes a base plate with
live center, 12" tool rest,
mounting bolts, mini screw
center and spur center. Fits all
drill presses with a through
hole in the table.
D4088 Lathe Attachment
Safety
Paddle
Switch
W1704 Benchtop Wood Lathe
D2056 Tool Table
D3066 5 PK Pen Blank - 3⁄4" x 3⁄4" x 5", Indian Rosewood
SHOPFOX.BIZ
39
Wood Lathes
Benchtop Wood Lathe
All cast iron construction and a 1⁄2 HP motor provide plenty of power and stability to turn bowls up to 10" wide and spindles up to
15 1⁄2" long, or 38" long with the optional Extended Bed. This stable Benchtop wood lathe has six speeds ranging from 480 to 4023 RPM,
providing the flexibility for any turning project. Includes: Live center, spur center, 3" faceplate, and tool rest.
MT #2 Taper
Spindle
Quick Access
Speed Changes
SPECIFICATIONS:
♦Motor: 1⁄2 HP, 110V, 6A single-phase
♦Swing over bed: 10"
♦Distance between centers: 15 1⁄2", 38" with
optional extension bed
♦Tailstock travel: 3 1⁄4"
♦Swing over tool rest: 7 1⁄2"
♦Speeds: 480, 1270, 1960, 2730, 3327,
4023 RPM
♦1" x 8 TPI right hand spindle
♦Tool rest length: 6 1⁄4"
♦MT #2 spindle taper and tailstock taper
♦Includes tool rest, live rolling center, spur
center and 3" faceplate
♦Overall dimensions: 37"L x 8"D x 15"H
♦Approximate shipping weight: 102 lbs.
Cast Iron
(102 lbs.)
W1752 Benchtop Wood Lathe
Shown with W1753 Extension Bed
W1753 Extended Bed For W1752
D3640 Tool Table Plus
2 HP Wood Lathe
w/ Cast Iron Legs & Digital Readout
Here it is! Our fully featured and powerful wood lathe at a competitive price! Featuring a hefty 2 HP motor, variable speeds, a swivelhead for outboard turning, a digital tachometer for exact spindle speed, precision ground cast iron bed, headstock and tailstock quick
locks, and heavy cast iron legs for stability. This beauty will handle it all!
SPECIFICATIONS:
♦ Motor: 2 HP, 110V, singlephase
♦ Swing over bed: 16"
♦ Distance between centers:
46"
♦ Heavy-duty, precision ground
cast iron bed and cast iron legs
ensures stability and minimal vibration
♦ 1" x 8 TPI RH headstock spindle
♦ Spindle tachometer with digital readout
♦ MT #2 spindle & tailstock tapers
♦ Spindle bore: 3⁄8"
♦ Standard tool rest extension
♦ Variable speeds: 600 - 2400 RPM
♦ Quick lock/release levers for tailstock & headstock
♦ 0°, 60°, 90°, 120° and 180° headstock rotation
♦ Overall dimensions: 76 1⁄2"L x 19"W x 48 3⁄4"H
♦ Approximate shipping weight: 294 lbs.
Standard Equipment:
♦ 6" Faceplate
♦ MT #2 Spur Center
♦ MT #2 Live Center
♦ Tool rest w/ swivel arm base
40
Digital
Tachometer
MT #2
Taper
Head Swivels for Turning Bowls
W1758 Wood Lathe
D1089 4-Jaw Chuck
D1090 3-Jaw Chuck
360-734-3482
Cast Iron
Legs
Mortising Machines
Mortising Machine
The super heavy-duty fence and hold down eliminates unwanted wood movement and “sticking chisels” – an all too
common complaint. The unique swiveling base allows easy off-the-bench operations and the extra height and depth
capacity allows the use of much larger stock for perfect mortises every time.
Powerful
Extra Long
Handle!
3
⁄4 HP
Motor
SPECIFICATIONS:
♦ Motor size: 3⁄4 HP, 110V, 3450 RPM,
aluminum finned
♦Adjustable depth stop-rod
♦Hydraulic cylinder for softer releases
♦Double support columns
♦JT #2 spindle, 1⁄2" JT #2 chuck
♦Mortise to the center of an 8" wide board
♦Mortise lumber to 8 3⁄4" thick
♦Heavy cast iron construction
♦Extra long (22") quick-set handle
♦Unique swiveling base
♦Micro-adjustable fence
♦Approx. shipping weight: 94 lbs.
Head Swivels for Unique Setups
W1671 Mortising Machine
D2056 Tool Table
D2056
Heavy-Duty Mortising Machine w/ Stand
This mortising workstation handles everything from standard cabinet door stiles to posts and
beams up to 9" wide. Its unique X and Y table movement makes mortise positioning a snap,
and its tilting head and angled fence adjustment allows compound setups for any mortise you
can imagine. Accepts mortising chisels with 1 1⁄8", 3⁄4" and 5⁄8" shanks.
SPECIFICATIONS:
♦ Motor: 1½ HP, 110V/220V,
prewired 110V, 14/7A, single-phase,
TEFC, 1725 RPM
♦ Table size: 19" x 12½"
♦ Vertical spindle travel: 9"
♦ Head vertical travel: 3"
♦ Table longitudinal travel: 14½"
♦ Table cross travel: 3"
♦ Column tilt: ±30°
♦ Fence angle: 0 - 30°
♦ Chisel capacity: ¼" - 1"
♦ Maximum chisel stroke: 6¼"
♦ Maximum workpiece width: 9"
♦ Chuck capacity: ½"
♦ Chisel size: 1 1⁄8, 3⁄4" & 5⁄8"
♦ Spindle speed: 1725 RPM
♦ Overall size: 71"H x 36"W x 24"D
♦ Approx. shipping weight: 315 lbs.
Mortising Chisels
D2839 1⁄4" Mortising Chisel
D2840 5⁄16" Mortising Chisel
D2841 3⁄8" Mortising Chisel
D2842 1⁄2" Mortising Chisel
D2843 5⁄8" Mortising Chisel
D2844 3⁄4" Mortising Chisel
D2845 4-Piece Mortising Chisel Set
(1⁄4" to 1⁄2") in Plastic Case
Mortising chisels fit all SHOP FOX® Mortisers
FEATURES:
♦ Solid cast iron construction
♦ Dovetail ways on column
♦ Rack and pinion headstock control
♦ Air spring assisted head return
♦ Work stop with extension rods for setting each
workpiece exactly the same
♦ Quick acting rack and pinion drive on longitudinal
slide speeds up production of wide mortises
♦ Tilting column
♦ Angled fence adjustment
♦ Large hold down clamp
♦ Steel cabinet stand with indexed
storage shelf for mortising chisels
Great for
Production
Work
11⁄2 HP
Motor
Head Tilts
30° L&R
Large Hold
Down Clamp
X & Y Table
Movement
Steel Cabinet Stand
w/ Indexed Storage Shelf
for Mortising Chisels
W1743
Mortising Machine
w/ Stand
SHOPFOX.BIZ
41
Dovetail machines
11" Dovetail Machine
Making dovetail joints has never been so easy! Simply set up the machine to match the stock
width and thickness, make a few adjustments to get a glove-like fit, and then crank out dozens
of perfect dovetail joints every hour. Accepts workpieces as large as 111⁄4" wide x 28" long and as
small as 23⁄8" wide x 77⁄8" long. Includes templates for four different dovetail sizes.
SPECIFICATIONS:
♦Motor: 1 HP, 110V/220V,
single-phase, prewired 110V
♦Table size: 19 1⁄2" x 7"
♦Floor to table height: 38 5⁄16"
♦Overall size: 28"W x 23"D x 57"H
♦Number of spindles: 1
♦Spindle speed: 18,500 RPM
♦Dovetail bit: 10° angle x ­5­⁄8" long
♦Dovetail shank: 12mm
♦Dovetail templates: 1", 1 1⁄2", 2"& 2 1⁄2"
♦Maximum dovetail height: 3⁄4"
♦Minimum dovetail height: 3⁄16"
♦Maximum stock thickness: 13⁄4"
♦Minimum stock thickness: 13⁄32"
♦Maximum stock size: 11 1⁄4"W x 28"L
♦Minimum stock size: 23⁄8"W x 7 7⁄8"L
♦Approximate shipping wt.: 366 lbs.
Features:
♦Precision milled cast iron table frame
♦Cast aluminum carriage
♦Steel stand
♦Hardened and ground chrome steel slide ways
♦Ball bearing linear guides
♦Four sided dovetail template bar
♦Micro adjustable spindle head
♦Workpiece stops
♦Quick cam clamp
♦4" dust port
♦Spring loaded carriage for smooth
operation
♦On/Off push button switch with oversized
stop paddle
♦2 cam-lock bar clamps
W1804 Dovetail Machine
D3696 Replacement Dovetail Bit
161⁄2" Dovetail Machine
This model is the luxury version of the machine above. Instead of cam-lock
clamps this machine features pneumatic clamps that are faster and easier to
use, a larger workpiece capacity, and magnetic switch control. Also, the motor
is inverted so vertical workpieces are inserted/removed from above rather than
below, which makes it easier and more ergonomic to operate.
Features:
SPECIFICATIONS:
♦Motor: 1 HP, 110V/220V,
♦Precision milled cast iron table frame
♦Cast aluminum carriage
single-phase, prewired 220V
♦Table size: 24" x 7 3⁄4"
♦Steel stand
♦Hardened and ground chrome
♦Floor to table height: 46 7⁄16"
♦Overall size: 38"W x 28"D x 57"H
steel slide ways
♦Ball bearing linear guides
♦Number of spindles: 1
♦Four-sided dovetail template bar
♦Spindle speed: 18,500 RPM
♦Micro adjustable spindle head
♦Dovetail bit: 10° angle x ­5­⁄8" long
♦Dovetail templates: 1", 1 1⁄2", 2"& 2 1⁄2"♦Workpiece stops
♦Dovetail shank: 12mm
♦Quick air cylinder clamp, air filter/
♦Maximum dovetail height: 3⁄4"
regulator/ lubricator with pressure
♦Minimum dovetail height: 3⁄16"
gauge
♦Maximum stock thickness: 2 3⁄8"
♦4" dust port
♦Minimum stock thickness: 13⁄32"
♦Spring loaded carriage for smooth
♦Maximum stock size:
operation
♦Magnetic switch with thermal
16 1⁄2"W x 59"L
♦Minimum stock size: 23⁄8"W x 7 7⁄8"L
overload protection
♦Approximate shipping wt.: 501 lbs.
W1805 Dovetail Machine
D3696 Replacement Dovetail Bit
42
360-734-3482
Drill Presses
SHOP FOX® offers a broad assortment of drill presses to suit every need - from small hobby shops to professional machine
shops. Our unique oscillating models provide the convenience of two machines in half the space, and our radial drill presses
offer unmatched versatility. For the best selection of features, performance and value, look no further than SHOP FOX®.
Horizontal
Sliding
Headstock
Gives 34"
Swing
W1667 & W1668 patented spindle
oscillation for sanding
Both
Head &
Table
Tilt
Includes 3
Drum Sanding
Set (D2677)
Oscillating
Spindle
Universal
Table Tilt
System
Can be
Used as a
Horizontal
Boring
Machine
Table Tilts
90° L & R
Oscillating
Spindle
Table Tilts
90° L & R
2¼"
Dust Port
Table Tilts
45° L & R
W1668
W1667
MODEL
Motor
W1667
⁄2 HP, 110V
⁄4 HP, 110V
1
⁄2 HP, 110V
131⁄4"
⁄32" - ⁄2"
1
W1669
3
81⁄2"
Swing
Drill chuck
W1668
1
1
W1670
⁄2 HP, 110V
1
34"
⁄16" - ⁄8"
1
W1670
W1669
⁄16" - /8"
5
1
5
34"
⁄16" - 5/8"
1
Chuck Taper
JT-33
JT-33
JT-33
JT-33
Spindle Travel
1 /8"
3 ⁄4"
3 ⁄4"
31⁄4"
5
12
5
5
620 - 3,100 RPM
250 - 3,050 RPM
550 - 3,470 RPM
550 - 3,470 RPM
7" x 7"
123⁄8" dia.
9 3⁄4" dia.
121⁄4" dia.
23"
38"
1
31 ⁄2"
641⁄2"
100 lbs.
157 lbs.
Table tilts 90° L&R
Head tilts 45°L & 90° R
Horizontal sliding headstock
Table tilts 90° L&R
Head tilts 45°L & 90° R
Horizontal sliding headstock
Number of Speeds
Range of Speeds
Table Size
Overall Height
Approx. Shipping Wt.
Features
5
1
54 lbs.
1
127 lbs.
Oscillating spindle ( ⁄2")
Table dust port (21/4")
1
Oscillating spindle ( ⁄4")
Table dust port (21/4")
Includes sanding drums
3
SHOPFOX.BIZ
43
Drill Presses
11⁄2 HP
Motor
1 HP
Motor
1" Drilling
Capacity
1¼" Drilling
Capacity
Built-in 110V
Light Socket*
18¾" x 16¾"
Large Table
14" Diameter
Table
Drill Press Table
Add this 23 ⁄4" wide x 117⁄8" deep Drill Press Table
with 3" high fence and stop block to your drill press
for greater work support and increased accuracy. The
fence and stop block slide along T-slots for quick,
yet secure setup and a removable 3 15⁄16" square
center block allows through-drilling past the table.
Fits all standard drill press tables and includes two
universal table clamps. Mortising chisel and clamps
not included.
3
OO
A
D MAGAZI
T-Slot Table
w/ Coolant
Channel
N
E
W
D4031 Drill Press Table
PPR
OVE
D
2010
Mortising Attachment Kit
W1680
MODEL
Motor
M1039
W1680
M1039
1 HP, 110V
11/2 HP, 110V/220V
Swing
Drill chuck
17"
⁄16" - 5/8"
1
20"
JT-3
JT-3
Spindle Travel
3 /4"
4 3/4"
12
12
140 - 3,050 RPM
210 - 3,300 RPM
14" dia.
18 3/4" x 16 3⁄4"
Number of Speeds
Range of Speeds
Table Size
Overall Height
Approx. Shipping Wt.
Features
1
65 ⁄2"
70"
185 lbs.
326 lbs.
Low RPM for metalworking
1" drilling capacity
Table T-slots & coolant channel
11⁄4" drilling capacity
*Light for 110V only
44
D4031 Mortising Attachment
⁄16" - 5/8"
1
Arbor
1
Includes cast iron chisel holder and fence, hold down
assembly, quill alignment pin, four chisels (1⁄4", 5⁄16",
3
⁄8", 1⁄2") , 3 two-piece bushings, 3 split bushings and
carrying case. Bushing sizes include: 2.945" OD x
2.600" ID, 2.600" OD x 2.366" ID, 2.366" OD x 2.170"
ID, 2.600" OD x 2.000" ID, 2.600" OD x 1.880" ID and
2.600" OD x 1.570" ID. Just match your drill press
quill diameter to the nearest ID bushing dimension.
Chisels have 3⁄4" outer diameter.
360-734-3482
Drill Press Lathe
Attachment
Includes a base plate with live
center, 12" tool rest, mounting
bolts, mini screw center
and spur center. Fits all drill
presses with a through hole in
the table.
D4088 Lathe Attachment
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising