Manual - Innovative Technology

Manual - Innovative Technology
9, VICTROLA (a.
by innovative technology.
MODEL: Y TA-3008
7-IN-1 NOSTALGIC
ENTERTAINMENT CENTER
Important Safety INStrUCIONS ccc sa serene Э
PIOQUET OV OIVION TA A CAN OA AE a a aa ЦОЙ
SEIU I BASIC Operation. A D
Listening 102 VIN ROCCO ever Ena o are tete dr
LS EI CE ee ET RTE
Listening to the FM Radio .. LAR EEA acia nee ma
Listening to an External Audio Device (AUX Mode) .. O |
Listening to an External Audio Device (Bluetooth Mode) .. Ra 0
Listening to a Cassette TApeë ..….............…...rresrsenerarerararensraceraracnranacerancencs TA
Maintenance / Proper Hanging ....c.ccoovisriseisisansssnrssssnanssnssnsnssssssssssussurnssns 1 1
ISB-10:PE RO CIID 555 aa ia a a a pS ea цой 13
Specifications... ian nuuanarenonenereea atenas 53
TUUDIBSTOSUNO EUIO oué rime ir race taie min Awa A
FCC Statement .. AA A O A E EA 0
CALIFORNIA PROP 65 WARNING. EN
RISK OF ELECTRIC SHOCK
DO NOT OFEN
AVERTISSEMENT:
RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR. |
- This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the
presence of non-insulated "dangerous voltage” within the product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
- Warming: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts
inside. Refer servicing to qualified personnel.
- The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance instructions in the literature accompanying the appliance.
CAUTION: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
WARNING: To prevent electric shock, do not use this (polarized) plug with an extension cord, receptacle
or other outlet unless the blades can be fully inserted to prevent blade exposure
WARNING: Invisible laser radiation when open and interlock failed or defeated. Avoid direct
exposure to laser beam.
PRODUCT COMPLIES WITH DHHS RULE 21 CFR SUBCHAPTER J IN EFFECT AT DATE
OF MANUFACTURE
|| This equipment is a Class | ог double insulated electrical appliance. It has been designed in
| such a way that it does not require a safety connection to electrical earth.
Important Safety Instructions
1. Read these instructions = All the safety and operating instructions should be read before this product
Is operated.
2. Keep these instructions- The safety and operating instructions should be retained for future reference.
3. Heed all warnings — All warnings on the appliance and in the operating instructions should be adhered
to.
4. Follow all instructions = All operating and use instructions should bé followed,
5. Do not use this apparatus near water — The appliance should not be used near water or moisture — for
example, in a wet basement or near a swimming pool, and the like,
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus
(including amplifiars) that produce heat.
9. Do not defeat the safety purpose of the polanzed or grounding plug. À polarized plug has two blades
with one wader than the other. A grounding plug has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the
plugs, convenience receptacles, and at the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart or rack is used, use
caution when moving the cart/apparatus combination to avoid injury from
tip-over.
13. Unplug the apparatus during lighting storms or when unused for long periods of time.
14, Refer all servicing to qualified personnel. Servicing is required when the apparatus has been
3
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus has been exposed to rain or moisture, does not operate
narmally, or has been dropped.
15,
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVERTISSEMENT:
RISQUE DE CHOC ELECTRIQUE—NE PAS OUVRIR,
-This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the
presence of non-insulated "dangerous voltage” within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no
user-serviceable parts inside. Refer servicing to qualified personnel.
-The exclamation point within and equilateral triangle is intended to alert the user to the presence of
important operating and maintenance instructions in the literature accompanying the appliance.
16.
oO
This equipment is a Class [I or double insulated electrical appliance. It has been designed in such a way
that it does not require a safety connection to electrical earth.
17. The mains plug is used as disconnect device, the disconnect device shall remain readily operable.
18. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture, The
apparatus shall not be exposed to dripping or splashing and that no objects filed with liquids, such as
vases, shall not be placed on apparatus.
13. The use of the equipment in moderate climate.
ACCESSORIES INCLUDED:
« RCA LINE QUT CABLE
* INSTRUCTION MANUAL
WARRANTY (BACK OF MANUAL)
«45 RPM ADAPTER
«USB CABLE
« AUDACITY SOFTWARE CD
Product Overview
27 21 22 23324
Front View
7 HR 9 10 11 E 13
1.
STOP ( N ) - Press to stop playback or cancel the program setting.
2&3. PREVIOUS/NEXT TRACK & REWIND/FF - (lt / 1),
4.
22.
23.
24.
PLAY/PAUSE (P>II) - Press to start playback, press again to pause.
(Note: This button only works in CD and Bluetooth mode.)
“REPEAT/(PROGRAM)" -Press to select the repeat mode.
-Press and hold the repeat button to program the CD playback.
(Note: This button only works in CD mode.)
“VOLUME” KNOB - Turn to adjust volume.
STEREO SPEAKERS
POWER (3) - Push to turn the unit on or off.
DISC TRAY
3.5mm HEADPHONE JACK - Accepts headphones.
LCD DISPLAY
3.5mm AUX IN JACK - Connect your external source to the AUX IN jack.
EJECT (4) - In CO mode, press to open and close the disc tray.
RADIO TUNER KNOB - In FM mode, turn to tune in a station,
FM - Press to listen to the FM Radio function.
TAPE - Press to listen to a CASSETTE TAPE.
CD - Press to listen to CD.
PHONO - Press to listen in PHONO mode.
(AUX/$ ) - Press to listen in AUA or Bluetooth mode.
FM ST INDICATOR - Red light illuminates to indicate the station playing is in stereo.
BT INDICATOR - Elue light will flash when the unit is waiting to be paired. The Blue light will
stay lit when an external device is successfully paired to the unit,
TUNING DIAL POINTER
PROGRAM INDICATOR - llluminates to indicate the program playback is set.
REPEAT INDICATOR - Red light will stay illuminated indicating all tracks are set to repeat.
Red light will flash when a single track is set to repeat.
(Note: This indicator only works in CD mode.)
Right Side View
=
Li E.
25
25. CASSETTE FF & EJECT
Press halfway to fast forward, press all the way to end and eject the tape.
Г à
Rear View
0 90 go Q в = сес 59 Oo
0 a MN
o
E. Es
26 27 28 29
26.
27.
28.
29,
FM wire antenna
While tuned to a station in FM mode, extend the wire and reposition to adjust for best reception.
USB socket
LINE OUT jacks
For amplifier device with RCA auxiliary input sockets, insert the white and red plugs on the RCA
cable into the unit. Insert the opposite end into the amplifier device. Be sure to connect the white
plug to the white jack and the red plug to the red jack.
AC Power Cord
Connect the AC plug into a wall outlet.
It's strongly recommended that this product should be operated only from the type of power source
indicated on the marking label.
Parts of the Turntable
A. Turntable
B. Safety Screw (for transport) Before using the unit, turn the screw clockwise using a coin or
screwdriver.
Important: When you transport the unit, turn the screw counterclockwise to secure the turntable,
Speed Selector
Tone Arm holder
Tone Arm. Before initial use, remove tie on the tone arm and lift the tone arm up.
Stylus
45 RPM adaptor
AMD
Setup / Basic Operation
Setup
1. Remove white protective needle cover by gently pulling towards front of unit.
2. Remove any packaging materials from the unit.
3. Connect the AC power cord
to a wall outlet.
Note:
- You're strongly recommended that this product should be operated only from the type of power
source indicated on the marking label.
-To prevent interference, avoid bundling audio signal cables together with the AC power cord.
Basic Operation
1. Push the POWER button to turn the unit on.
2. Select the source by pressing the (AUX EB YPHONOICDIT APE/FM button.
3, Rotate the VOLUME knob to adjust to the desired sound level.
Listening through RCA LINE OUT
For amplified device listening, first reduce the volume level to minimum. Insert the white and red plugs
on the RCA cable into the unit, then insert the opposite end into the amplifier device. Be sure to connect
the white plug to the white jack and the red plug to the red jack.
Listening Y h Headpl rot inchided!
For private listening, first reduce the volume level to minimum.
Insert your headphones’ plug into the 3.5mm jack, then
adjust the volume up by turning the VOLUME Knob.
Note: The speakers will automatically be deactivated white
headphones are plugged in. 3.5mm JACK
CONDENSATION WARNING:
When the unit is moved from a cold or warm place, or is used following a sudden temperature change, there is the
danger that water vapor in the alr may condense on the unit, preventing proper operation. In such cases, leave the
unit for 1-2 hours after plugging it info an AC outlet to allow It to stabilize at the lemperature of iis surroundings.
Listening to a Vinyl Record
—
. Press the PHONO button.
2. Gently open the top cover.
Note: Be careful not to pinch your finger when opening/closing the top cover.
3. Place a vinyl record on the turntable. When playing a 45 RPM record, use the included adaptor.
I i 33
45
4. Select the appropriate speed (4). me
Fl
ОР
L i
> Remove the tone arm-rest holder to release the tone am.
5
6. Move the tone arm gently to the edge of the record (or the starting point of a track).
The turntable will begin to turn.
7. When the record reaches its end, tone arm will stop at the center of the record and you must lift and
return the tone arm to the tone arm rest manually. Lock the tone arm-rest holder to protect the tone
ETT.
Important:
- Closing the top cover will help prevent dust from selling on the turntable.
- Always relock the tone arm clip before transporting the unit.
- Do not place anything on top of the turntable cover, especially while playing a record.
Listening to a CD
1. Press the CD button.
(Note: When no disc is sef, “no” will appear on the display.)
2. Press the OPEN/CLOSE (4) button.
(Note: This button only works in CD mode.)
Place a disc on the tray with the printed label face up.
Press the OPEN/CLOSE button (4) to close the tray.
Press the PLAY/PAUSE button (eI1) to begin playback.
(Note: The CD playback will start automatically.)
To temporarily pause playback, press the PLAY/PAUSE button (»11). Press again to resume.
To skip tracks forward or backward, press the corresponding skip button (1-4 or El). Pressing
(4-0) once will restart the current track. Pressing (l-4) twice in succession will return to the
beginning of the previous track.
8. To fast forward / rewind within a track, press and hold down the corresponding skip button until the
desired position is reached.
9. To stop playback, press the STOP (Il) button.
CN = La
> =)
Important:
- Never place more than one disc on the tray.
- The disc must be placed in the center of the disc tray. An incorrectly loaded disc can permanently
damage the tray door mechanism.
- Do not push the CD tray — always use the OPEN/CLOSE button,
- [It takes a moment for the unit fo load à disc, during which all buttons will be temporanly deactivated,
Repeat Playback
Each time the REPEAT button is pressed, the repeat mode will cycle through the following options:
REPEAT 1 (Repeat one track)
The repeat indicator will flash and the current track will be played repeatedly. If you press the
(MH or p=) button to select another track, the track you select will be played repeatedly.
REPEAT ALL (Repeat the entire CD)
The repeat indicator will stay lit and the entire CD will be played repeatedly.
Notes:
- Repeal playback works with CD's only.
Progr
Up to 20 tracks can be programmed to play in any desired order.
Notes:
- Programmed playback works with CD's only.
9
1. Select "CD mode, then load & CD.
2. While the CD is stopped, press and hold the REPEAT button.
3. PROGRAM indicator lights up and "01" blinks on the display.
4. Press (I< or Mel) fo select a track number.
5, Press the REPEAT button again to sel the next program track, "02" appears and blinks.
Repeal steps 4 through 5 to program the remaining tracks.
6. When the selection of track numbers has been finished, press the PLA Y button (+11) to start program
playback.
(Note: When all 20 program tracks are sel, press REPEAT button and "FI" will appear on the display)
7. To cancel the program mode, press the STOP (IM) until the program indicator doesn't light.
To check the programmed order
In stop mode, press (<4 or wl) repeatedly to show the track numbers that have been programmed.
Jo add a track to the end of the programmed order;
In stop mode, press and hold the REPEAT button.
Select a track number by pressing (1-44 or ki), then press the REPEAT button.
The current track will be added to the end of the program.
Listening to the FM Radio
1. Press the FM button.
2. Tune to the desired station using the Radio Tuner Knob.
Note: In FM Mode, the red "FM ST indicator lights up when the station reception is in tune.
РМ broadcast: Extend and repositon the FM antenna.
Listening to an External Audio Device (AUX Mode)
In AUX (auxiliary) mode, this unit can play audio from an external audio source (Pod, MP3 Player.
Portable CD Player, etc.)
There is an AUX IN jack on the front of the unit. When connecting a device that has a headphone jack,
use the cable with 3.omm plugs on either end with the front AUX IN jack.
1. Plug one end of the AUX IN cable (not included) into the AUX IN jack.
2. Pressthe (AUX/*) button to select AUX function,
3. Plug the other end of the cable into the headphone jack of the external audio source.
NOTE: Al operations are only available on your external device.
Listening to an External Audio Device (BT Mode)
In BT (Bluetooth) mode, this unit can play music from external devices that have a built-in
Bluetooth feature.
GETTING CONNECTED USING BLUETOOTH
1. Press the (AUX/#) button twice to select Bluetooth function. The BT indicator will flash blue.
10
2. While the BT is activated, turn on the BT setting on your external device,
3. Your external device will begin to search for the Wooden Music Center,
NOTE: The effective distance between your external device and this apparatus is 10 meters (33f).
4. Wait for "Wooden Music Center” to appear on the paired devices list on your external device and
press "Wooden Music Center”,
In some instances, you will be asked for a password. Fill in "0000" then press "OK" on your
external device.
5. A few seconds later when your Bluetooth connection is successful, the blue indicator will stay lit,
You can control music playback with the PLAY/PAUSE (en) or the (It and ml) buttons on the
apparatus.
Note: Stop / Fast Forward / Rewind are only available on your external device.
Listening to a Cassette Tape
—
Press the TAPE button.
2. Load an audio cassette tape into the unit (located on the right side of the unit). Playback will
automatically begin.
3. Press button halfway to Fast Forward the tape.
Press button lightly and playback will resume.
4. Press button completely down to end playback and eject tape.
Maintenance / Proper Handling
С t Disc Handli
* Always place the disc on the disc tray with the label side facing upward (compact discs can be
ayedirecorded only on one side).
* To remove a disc from its storage case, press down on the center of the case and lift the disc
upward, holding it carefully by its edges.
" 2 far a disc, wipe the surface from the center hole outward towards the outer edge with a soft,
ry cloth.
* Never use such chemicals as record spray, antistatic sprays or fluid, benzine or thinner to clean
discs; they will irreparably damage the disc's plastic surface.
* Discs should be returned to their cases after use to protect from dust and scratches.
. not expose discs to direct sunlight, high humidity, or high temperature for extended periods of
ime,
* Printable CD-R and CD-RW discs are not recommended, as the label side may become sticky and
damage the unit.
* Use a soft oil-based felt-tipped pen to write information on the label side. Never use a ball-point or
nard-tipped pen, as doing so may damage the recorded side.
* Do not use irregularly shaped CDs (octagonal, heart shaped, business card size, etc), as they will
damage the unit.
= Read all precautions supplied with any CD-R or CD-RW disc.
* Never handle a disc with dirty fingers,
« Never insert a disc that has a crack on the surface.
Handling Vinyl Records
* Do not touch the record's grooves. Only handle records by the edges or the label with clean hands.
Touching the record surface will cause your record's quality to deteriorate.
To clean a record, use a soft anti-static cloth to gently wipe the record surface.
Keep records in their protective sleeves when not in use.
Always store records upright on their edges.
Avoid placing records in direct sunlight, close to a heat source (radiators, stoves, etc.), orin a
location subject to vibration, excessive dust, heat, cold or moisture.
т т |
General Care
* When removing the power plug from the wall outlet, always pull directly on the plug.
Never pull the cord.
||
* To keep the laser pickup clean, do not touch it, and do not forget to close the disc tray.
* Do not attempt to clean the unit with chemical solvents as this might damage the finish.
* For cleaning, only use a clean, dry cloth.
* In order to shut off the power to this product completely, unplug the power cord from the wall outlet.
Be sure to unplug the unit if you do not intend to use it for an extended period of time.
How to Replace the Turntable Stylus
The stylus should last about 50 hours under normal use. However, it is recommenced that the sfylus be
replaced as soon as you notice a change in sound quality. Prolonged use of
a worn-out stylus may damage the record. The highest speed of 78 RFM
records would wear out the stylus more quickly.
Removing the old stylus:
1. Seta screwdriver at the tip of the stylus and push downward (A).
2. Remove the stylus by pulling it simultaneously downward and forward.
Installing a new stylus:
1. Hold the front tip of the stylus and insert its rear edge (B) first.
2. Push the stylus upwards (C) until the tip locks into place.
Caution:
Do not bend the stylus.
.
® [Do not touch the needle fo avoid injury your hand. t
® Tum off the unit's power before you replace the stylus. o
* Keep out of reach of children.
Guide Pins (Inside)
USB TO PC RECORDING
Audacity Software
The provided CD disc contains the following software:
(1)Audacity_for_MAC--——---—For Mac
(2)Audacity for VWIN=---- For Windows
The software is compatible with Window AP, VISTA, à and &, 10 requires appropriate drives and Mac.
NOTE:
- Read about Audacity on Windows 8, 7 and Vista. Windows 2000, NT, and 95 are not supported.
-Windows 10 is supported, but subject to alí enabled devices having Windows TO-compatible drivers
designed for the device. This should be the case for the built-in sound device of a new computer that
came with Windows 10. Please see our Windows 10 page for solutions if you encounter problems. We
hope to improve our Windows 10 compatibility with older devices in a fufure release.
-A CPU that supports SSEZ2 is required (any CPU made after 2003 should support this). Please use
the legacy Audacity 2.0.6 version If your machine lacks SSEZ2 support.
- Audacity for Mac is a Universal Binary for OS X 10. 6 and later. Audacity runs best with at least 1 GB
RAM and à 7 GHz processor (2 GB RAM/2 GHz on US X 10.7 and later).
- For lengthy multi-track profects, we recommend a minimum of 2 GB RAM and 2 GHz processor (4 GB
RAM on OS X 10.7 and later).
- The 2.1.1 refease was the final release for PPC Macs.
Because of the vanaltion of different operation systems, some of the interface may not be the same as
below.
Audacity Installation and USB Connection
Connect one end of USE cable to the turntable and the other end into your computer. Then connect the
AC power cord of the turntable.
Audacity for Windows
Installing the Audacity Software
1. Please insert the Audacity software disk that comes with your unit. Go to My Computer and double
click the CD ROM Drive (AUDACITY).
DL 1270 FE
A - - — — ———— —
(JO M 6 Computer в = | ++ ea Ге
| Crganize = Mem properties man all oo change à progiem Map netéork érrée Open Control Panel — li ®@
L Eee à Hard Desk Drives (3)
| ME Desktop Local Disk (C:) Ce (CH)
& Downloads a — me с LE -
1, Recent Places LN IE Ie PURE SE a | + H few =f я of
> Autodesk 360 SHOW (E)
a Lita ;
à Documents 4 Devices with Removable Storage (1)
al Manic 4 4 DVD Dreve (F-) AUDACITE
A Pictures = rte due Fi bis
= Lala
2. Select Audacity-for-win for window system.
13
J. Audacity
| Audacity-for-mac
1. Audacity-for-win
3. Double click the audacity-win-2.1.2 to install the audacity software.
Ed
audacity -wi
n-21.2
4. Select the setup language first and click on OK to continue.
Select Setup Language us =
() Select the language to use during the
EZ =)
Loox J cond |
Mote: The language choice in the Windows EXE Audacity installer only selects the language
for the installer.
5. The Audacity Setup Wizard will appear. Click on Next Da install the software.
= Setup - dida = р | =>. |
Welcome to the Audaaty® Setup
Wizard
Frum vell Fatal Auciasty $ 1. 0% your computar.
1% m recommended that ros dose al other appicatora before
| Audacity ===
| (net > | | Come |
6. Continue to click on the Next buttons.
la Setup - AudecitpE i ESE EE
Information
Please read He folowing impor tant information before conbrung. а
Wren you ae Péady to contre with Setup, che Fiext
Audacity” in free, open source software for recording and editing =
sonda. lt 15 avaliable for Mac 05 K, Mécrosoft Wirdows, GNU /Linune,
and other operating systems. Learn more about Audacity. Alto check
auf Wiki and Forum for more information.
(Licerpe: Audacity in Érez software You may use И for any personal,
commer ial or educational purpose, including installing it on AT many E
diferent computers as you wish Asdacity is licensed under the terms
of yeriion 2 of the GHU General Public License [GPL] as published by the
Free Software Foundation Thé full test of the license 15 al50 available
when running Msdasity via the Help menu > About Audacity... command
> er an яя
| <Back Hess = ен
14
la Setup - Audacty® nn = i FESSES!
Lehkect Destanateon Location
Where should Aucisoty T be nstadedr ét
К, Setup vel instal Audacity E into the folowing folder.
To continue, desc Mext. LF you void loz to select a different folder, deci Browae.
a am Fées (086 Audacty Bro. |
At least 56.6 MB of free dak space e requred.
| Back [тен |] [стен |
@ Setup + Audacity® 1 [es
Select Additional Tasks
Wied additonal tasks should be performed? ed
Select the additional tases you would lee Setup to perform whie rsislng Audactyr E.
hen chile Meat.
Additonal icons:
of Create a desktop con
» Reset Preferences
L
7. Click on the Install button to start installation.
(A Setup - Audacity® Т [STC 8)
Ready to Install
Setup 6 now ready bo bepn installing Audacity ® on your computer. és
СЫ instad to continue wath the installaton, or chk Bade if you want to review or
change any settings.
= Setup - Audacity ® i Le | ==
es €)
Please wat while Setup retals Audacity E on your computer.
C-'Program Files (x55) Audacity helo manual images DO jabeledosforede tach.pre
8, Click on Next to continue.
ба Setup - Audacity ® i Lo |
Information
Please read the folowáng important nformation before contirumg, Mm
hen vou are ready to contre with Setup, deck Next.
J: A Free, Cross-Platform Digital Audo Editor a
WWW": алое Иоан ку бели, ога -
welcome feedback on Audacity, suggestions for new dr mproved features,
reports and patches at:
al support with Audadty s not provided by e-mail, but on our Forum;
pepita fc) 1999-20 15 by Audacity Team. This copyright mobos
to al documents n the Audsoty Source code archive, except as
noted (mostly in tr lo-prc subdirector).
E = = ! „=
9. Click on Finish to complete installation.
Ea Setup - Audacity ® 1 рр
Completing the Audaaty® Setup
Wizard
Teto had Tebeos rita Sadao kon au De Tr
aba or Ca He hurt bo Se ey he ra tabel «лиса.
Audacity >
| lack | A |
10. You can now open the Audacity software and start recording your files.
16
Note :
1. Once you set up Audacity, you do not need to re-set it with each use.
2. The "Audacity-win-2.1.2. exe” (helpfile included) is available for Windows & Windows 7/ Windows TO
requires appropriate drivers / Windows Vista Windows XP.
3. If you cannot run the exe document, please go to the website below and download the file from it
directly.
http://www audacityteam.org/download/windows
4, Users upgrading to this release from Audacity 2.0.5 or earlier who had FFmpeg installed will see
a notice that FFmpeg needs to be reconfigured.
Please visit http://manual.audacityteam.org/o/man/fag installation and plug ins htmi#ffdown for a link
to the recommended 2.2.2 version of FFmpeg for Windows and Mac OS X, and for information for
Linux.
o. The Vindows installer for 2.0.xX versions will replace legacy 1.2.x or any previous 2.0.x installation,
but install alongside legacy 1.3.x Beta versions. It is strongly recommended to uninstall previous Beta
versions before installing current Audacity.
5. Audacity 2.1.2 requires the CPU to support the SSEZ instruction set which should be available on
any Intel hardware produced after 2001 and any AMD hardware produced after 2003. To check what
SSE levels your CPU supports, you can install CPU-Z. If your hardware only supports SSE, you may
download Audacity 2.0.6 from http://www .oldfoss.com/Audacity. html.
7. Users on Windows XP: You may see "Entry Point Not Found" when first launching Audacity after
installation. This error occurs if you are running less than the latest "Service Pack” of updates for your
Windows AP system.
Please see hitp/manual audacitytearn.org'o/man/faq installation and plug ins.ntmiento poir
for how to install the latest Service Pack and for advice about the potential security risks of running XP
now that Microsoft no longer supports It.
8. On first use of Audacity you need to confirm or cancel the Register Effects dialog for detected effects
before you can launch Audacity. (For additional information, please visit the website at
hitp:/imanual audacityteam.orglo/maneffects preferences himi#registe
17
Configuring Audacity for Microsoft Windows
Audacity Interface
Re [dt Vas Tepe each (ews [был dies mip
T+ A E A An A | AAA AA
н) №) №) 4) 6) 9) uo 0— 4 y —rmARE +0] 6 aaa g
a + UTN dao Doce J marre Bue = 4 Medel Mig Dalim =
c La TE a ar En LE E na 9 ni ia END Vr
Device Toolbar
Audacity Control Buttons
Use the attribute controls button at the top of the screen to go to pause, Play, Stop, Beginning, End,
Record etc. Use the File, Edit, View, Transport, Tracks, Generate, Effect and Analyze menus to
Save, Export, and edit the music.
1. Click the ((#)) button to pause the recording;
2. Click the ((#)) button to play
3. Click the (=) button to stop the recording,
4. Click the ((=)) button to skip to start;
5. Click the ((=)) button to skip to end
18
6. Click the ((#)) button to record;
7. Adjust the input volume;
E. Adjust the output volume;
1 234 56
E 0 AR —— (can sun ostomy 2
Audacity Preferences
1. Click the “Edit” on the Audacity interface, select “Preferences”.
| №) №) #) ®) №) ®) Persia
3
Fde Edit | View Transport Tracks Generate Effect An
Е | Ledo Cirle 2 I
Redo Curie Y NS
Е — Le
— Cut Crri+X La
—| Delete ak FF
Copy Carla
Faria Cri Y
Dou pli ¢ ste CelsD
Remove Special
Paste Text to Mex Label Cari Ae Y
Cap Bound anes
Labaled Zurdo
Select
Find Zero Crossmngs
Move Curcesr
Region Save
Region Restore
Play Region
In the pop-up window of the Audacity Preferences, tabs of Devices, Playback, Recording, Quality,
Interface, Tracks, Spectrograms, Import / Export, Extended Import, Projects, Libraries, Directories,
Wamings, Effects, Keyboard, Mouse and Modules are listed on the left side of the window as shown in
the picture below.
19
Interface
Host: | MME hi
Usemg: Paortáumds V19-devel (built Jan 9 2016 12:36:32)
Playback
Device: Realtek High Definition Audio “|
Recording
Device: | 3- USB PnP Audio Device
Channels: 2 (Stereo)
Warm 6
Effects
Keyboard
Mouse
Modules
à. Click Devices’ on the left side and detailed contents of the Devices will appear on the right hand side
of the interface.
Click the + arrow on “Device” below Playback and choose "Realtek High Definition Audio”
or "Microphone Sound Mapper- Output”.
Click the = arrow on ‘Device’ below ‘Recording’ and choose "USE PnP Audio Device”
Click the = arrow on ‘Channels’ to select ‘2(Stereo}. Do not click OK until you finish all of the settings,
Note: If you cannot find the " USB PnP Audio Device " in the Device list, close the Audacity Software
and re-open and try again.
Windows Vista and later call most USB external devices “microphones” but Windows XP and earlier do
not. Some higher-end USB recording interfaces may appear as their explicit manufacturers name.
Interface
Playback Host | MME ww
A Using: Portáudio V19-devel (built Jan 9 2016 12:36:32)
Interface Playback
ms Device: Realtek High Definition Audio
Spectrogram
USE PrP Aucho Dœuce
пн; 2 (Stereo)
= pial r Lan
20
3. Click ‘Recording’ on the left side and the detailed contents will display on the right side.
Click the checkbox beside ‘Software Playthrough: Listen while recording or monitoring new track.
Click the checkbox beside ‘Sound Activated Recording’ and adjust the Sound Activation Level (dB) to
-36.
NOTE: Once the ‘Sound Acfivated Recording’ is selected, the Pause button will not work during
recording. You can Click “Interface” on the left side to select Sound Activation Level.
Playthrough
— Overdulb: Play other tracks while recording new one
Playthrough: Listen while recording or monstoring new track
(uncheck when recording “stereo max")
Latency
Audio to buffer: 100 Milizeconda (higher 8 more latency)
Latency corrector: -130 milliteconds (negative = backwards)
Display
E Ergonomic order of Tramport Toolbar button
bi Show "How to Get Help’ dialog box at program start up
Masse dE EE N
Language: :
48 dB (PCM range of 8 bit samples)
Location of Manual: 60 06 (PCM renga of 10 bi camples
72 dB (FCM range of 12 bit samples)
Behawors -64 dB (PCM range of 14 bit samples)
Beep complet 7 98 (PCM range of 16 bit samples)
= == -120 dB (approximate mit of human hearing)
[] Show track name 15 J8 (POM « of 24 bit samples)
[Retain labels if sele25SR"ERSPF TS 7 SBT 5355
4. Before exporting a MP3 file, you need to find ‘lame’ first. If the program does not show the MP3
Library, make sure the Audacity driver disc is inside your computer,
Click ‘Libraries’ on the left side, then in ‘MP3 Export Library’ interface, click 'Locate...” button to find
lame _enc.dil”.
MP3 Export Library
MOI Library Versos: MP3 export ibrary mot found
MP3 Locate...
LAME API Library: Download
FEmpeg ImporyEsport Library
FEmpeg Library Version: FEmpeg Ebrany not found
FFmpeg Library: Locate.
FFmpeg Library: Download
5. You can download the 'lame' software from the website.
Click Download anda website will be opened automatically.
ARI Expert Library
MPI Library Version: MPI suport bhbrary not four
BARI Labrary- Locate.
LAME BAP3 Library Download |
FF Erp mE spent Library
FFmpeg Library Version FRrpeg bbrary not found
FFmpeg Libr ary Lier ate.
Open the website to download ‘lame_enc. dll: click on LAME download page.
Windows
copar ml a >
Lefrchich ну: Боты, о гео ГНО
T Deco undemeata Fr FF mpeg LAME on YWindows cic bilde click Ba kr Lisme v1.59] or Windows sar ind sae the Вы тучами бл утлыг соитрай
3 Coutfe-chét Lace oJ 53 3 fe Winders axe’ Io Guich f (you can dle goes ary wirmengs. Ball the “publdacher Could not be wine")
4 Follow tha Sata PC BO EN LAME or Accdacty maiong sort aor 2 change Bw fr Mon epan А ОС Frogra= Files Lame or Audit” Dar
"C ‘Program Foes (0885 ame br Aodacty” on a &-bi wrson of Windows)
You shank now th a0 13 ego MPT нба avy hether condaurpton chosing File > Export Redes... thes selecting WP Fier” om the Capon Auta Dia
Title Ao
Orca there ify Si CRA обе Асеев Sa Sr 13 date! Bh path ts an céder dee de Ue To comet th
1 Ersure thre ary no cider versions of me enc 3 0 poy incahong heey Audacity detecis £ epa;
«(Program Filey Lams for Audacity or C-Program Files [cbiyl ame lor Audacity “Sii о ебать ЕР ИН outs the na ST)
+ He Audacity installation older culty © Program Files Actacty or C Program Fis (0387 Audacity], of inthe "Plug bem” fodder inside that
¢ Ext Autacty and raoqate 10 the audacity oli presence Be at
» Windows XP Cocumenls and Sarga Cute naw > Apphtabon Dats Audacity audacity oy
» Windows Vista ndoes TAY dows | Uren 449 mame AUR Ae ia audacity cig
A la om to aM audacıhy O9. ue mu id Af ERA cpenÉno улет 10 shoa hcider Has and foie See mabuchoss br ki dos 7 amé лоза
A Ca |
Jump straight to Windows download’ in the top line. Left click Windows download’ and it will jump to the
download chapter for Windows.
Click Here, Windows User —Qump straight to Windows downloads > —
Click Here, MAC OSX User -=-> Jump straight to MAC OSX downloads
Audacity LAME is free, so you can click libmp3lame-win-3.99.3.zip' under ZIP OPTION to download.
Click Save, select the Folder you want to save it in, then click Save again to save it.
ГО DOWNLOAD Lame and FFmpeg for Windows, dick links BELOW:
If Audacity does not detect LAME, download the ZIP option, extract the fies msde to a wed known folder, then open Audacity, go to Library
Preferences and configure & [0 search an the wel known folder you extracted [Mé Mes Lo,
MOTICE: As of 2014-June-27 Clam Antivirus is showing alalse positive for Lame_v3.99.3_for_ Windows.exe
Limé w3 60.3 for Vandows.cr - (5SHA256 SUM har)
FIP CIEL
mp Hlame-win- 1.900.359 dissues7 Some help HERE)
Close the webpage, then click OK to close the Audacity preference. Minimize Audacity interface, then
open the Folder where you saved the libmp3lame-win-3.99.3. Double click on it, then double click on it
again to open. Now left click on lame enc.dil. Hold and drag it to your Desktop.
23
NOTES:
= Once you move it to the Desktop you do not need to do this again.
E After opening lame _enc.dll the first time it may not be necessary to open lame _enc.dll the next
time you record.
Go back to Audacity and click on Edit, then Preferences. Click on Libraries in MP3 library. Click on
Locate, then click on ‘Browse’. Click on Desktop, then click on Lame enc.dll to highlight it. Then click
Open.
Click on OK on locate Lame box. Click OK on Audacity Preferences to close and to complete your
settings. Now you can Record, Export and save your favorite music.
6. For detailed information about how to run this program, please click ‘Help’ and click "Manual (in web
browser).
Help
| Quick Help
¡a
Screenshot Tools...
Check for Updates...
Audio Device Into...
Generate Support Data...
About Audacity...
ГА Adjust the output and input volume to 20% (or 0.2 level).
p be 5
—
NOTE: Because of the vanation of different operation systems, the input volume control may not work
on some individual Windows versions. Windows Vista is recommended to ensure the input volume
control works propery.
For any queries in regard to "Mixer Toolbar’ please visit:
Mitle=Mixer Toolbar Issues
RECORDING OPERATION
To download music and save into computer:
1. Place the record on the turntable.
2. Move the tone-arm over to the record to start playing.
3. Click the Record ( ®/) button to start recording.
The waves (left and right tracks) will show on the interface.
CENT FT caca
>| 6| PALÓ ES
15 "a 174 111 Ha
| 40 tour Es
>, M. à À ca a de A a ah kc AR od AR РР
в
#5
1. TE nh of | di
Lala mag р Senior Tar BEN Legh = Aube Fonibon
ню + | TT ITR CITE EM IT EURE
4, At end of a song, click the “pause” ( ") ) button on the computer and press the Stop button on the
turntable, move the cursor to the wave area and left click at the end of the song.
For the next song, replace the album or move tone-arm to another desired song. Press the Play button
on the tumtable to start playing the next song. Immediately press the “pause” ( “.) button on the
computer and downloading will continue and another R/L track will appear on the interface.
NOTE: Pause button will not work during the recording process if the "Sound Activated Recording’ in
Preferences Recording is selected. Clear the checkbox next to ‘Sound Activated Recording’ if you want
to manually pause recording.
5. Repeat steps 3 and 4 until you have finished downloading.
NOTE: Do not click stop button on the computer when continuously downloading songs. Remember to
click pause button in between your desired songs. Press sfop button on the computer only when all
your desired songs have been downloaded.
After your have finished downloading, you may play back the songs through your computer. In stop
mode, simply click (- =/ ) SKIP TO START button and then the ( >, )PLAY button.
TIP: If you press the “stop” button by accident, you can click “Transport” and click "Append Record” and
you can continue to record in the same track.
25
Transport | Tracks Generate Effect Analyze Help
Play Stop space
Play/5top and Set Cursor Shift= A
Loop Play Shift=5pace
Pause Р
Skip to Start Home
Skip to End End
Record В
Tamer Record... Shaft+T
Append Record > Shaft +R
Overdub (on/off)
Software Playthrough (on/off)
= Sound Activated Recording (on/off)
Sound Actreation Level...
Rescan Audio Devices
For example, if the "stop" button has been pressed by accident at the end of the first song, do not click
anything in Audacity. Prepare another song, click “Transport” tab and select "Append Record”. The
second song will continue to record on the same track at the end of the first song.
YOU now have a music download on your computer but the music needs to be saved and converted to
WAV, OGG, or MP3 formats before exporting.
GENERAL PROBLEMS FOR WINDOWS VERSION
1. If you do not have the fluctuating wave on the interface during recording, or the recording sounds
unsatisfactory, adjust the recording volume as follows:
« Click Start in the left corner of the computer, select Settings, Control Panel.
@ Set Program Access and Defaults
RL windows Catalog
% Windows Update
m Programs в
Le Documents к
>
Cai
< ©
1 7 Run.
Ep
+
LY PE] Log OFF abe...
=
> Turn Off Computer...
FEC ny
' In Control Panel interface Find Sounds and Audio Devices. Double click the icon to enter
Sounds and Audio Devices Properties interface.
E Control Panel =
X
Fie Edt Vew Favortes Took Help Ed
Eye - © > Jo se {= Folders GD
a ade Mare я
CO EO
* In Sounds and Audio Devices Properties interface
volume window will display, select the Audio tab to reveal the settings.
In Sound recording, select USB PnP Audio Device and click the Volume button to set the recording
input level. The WAVE IN window will appear.
( Volume. Y )| Advanced. |
is
MIDI mus playback
"За. Default device
Micsoroft GS Wavetable SW Synth м
| Volume |[ Abou |
[Use ordy default devices
Lor J came |
* In WAVE IN interface Adjust the recording volume to about 50% as per illustrated below.
The fluctuating wave will show on the interface when recording.
27
2. If you do not hear any sound when the turntable is connected and you wish to listen to the music and
for video, it is possible that the default playback device has been changed to USB PnP Audio Device
when the turntable connects to the PC.
Recommended: Remove the USB cable from the PC,
Alternative. This solution requires you to change the setting manually every time you connect the USE
cable to the PC.
Change the setting as follows:
e For Vista and
Windows 7 users:
Click “Start” and go to the Control Panel. Find and
click “Sound” icon. Sound window will be opened
and the “Playback” window will be seen. You will
see that the Speaker USB PnP Audio Device is set
as default. To ensure the sound, click a playback
device (e.g., Speaker High Definition Audio), then
click "Set Default” and click OK. The sound should
now work.
e For Other Windows
versions users
(e.g.: Windows XP):
Click "Start” and find “Settings”, "Control Panel”. In
the Control Panel window, find and double click
into "Sounds and Audio Devices”. In the Sounds
and Audio Devices Properties window, Volume
window will be seen. Click the “Audio” tab to reveal
the settings. In the Sound playback section, you
will see that the USB PnP Audio Device 15
selected.
To enable the sound, click the pull-down arrow and
select your inbuilt sound device or sound card by
name as the playback device (e.g., Realtek) and
click OK and the sound should be enabled.
— Sound
Pend pocordng | Ssunds | Communcasont |
Seller! a plybari derior Below 10 ЕНОТ) А РР)
Headahores
Digna Audio EC
El, orale:
| Li pi a)
das eer
Sune
Y are
uns Saba
@ Deu de
Suns wcodrg
X Deal denn
X
USB PnP Audio Device
| y. E poe | d'hier +! |
hal MN pa pe paliar
Cra deste
—s" Ur 5 ob 5 nth =
[ —volmo. | Moat. |
QUe ore delsul desces
Ge
DIVIDING TRACKS
After you have finished downloading, you may play back the songs through your computer before
exporting. In stop mode, simply click ( >) SKIP TO START button and click then the ( >) PLAY
button.
1. Press ( >) button to return to the beginning of the first song.
2. Move cursor to the wave graphic area, left click mouse and hold then drag from left to right.
Release the mouse when the highlight reaches the end of the first song.
Highlighted
3. Click "File" tab then select "Export Selected Audio...”.
le] Edit View Transport Tracks Generate Effect Ana
Recor Files "
Save Project Ctrl +5
Save Project As...
Save Compressed Copy of Project.
Check Dependencies...
Eder Metadata...
Export Audio... Ctrl +Shikt+E
— Export Selected Audio...
| Export Labels...
Export Multiple... Ctrl + Shift +L
Export MIDE...
Apply Chain.
Ed Chains...
Page Setup.
Fait Carl +0)
4. In the next window, select a location as well as the format (most people prefer to save audios in
MP3 format (MP3 format is most commeon)) in My Music and put the title in the file name. Click
“Save”.
NOTE: The most common formats are: MP3, WAV (WAV uses a lot of space), and MYA/AAC
(most iPod devices can play audios with this format).
You can also choose alternative formats such as AIFF, WAV, OGG or FLAC if these formats are
supported on both your computer and the exported devices. Note that according to your selection,
the Edit Metadata window may not appear,
- 03 PO
Ne dems match your search.
Value
Wait a few seconds before exporting the selected audio.
31
track 01
Exporting selected audio at 128 Kbps
a. |
Ebpsed Time: 00:00:01
Remarano Tre: 00:00:06
[ stop | [ cancel |
Second song to be divided and saved:
1. Move cursor to the wave graphic at the beginning of the second song. Left click mouse and hold
then drag from left to right until you reach and highlight the end of the second song.
2. Click "file" tab then select "Export Selected Audio...”
3. Follow above steps to divide songs, export and save, one-by-one.
MP3, WAV AND OGG FORMAT
THESE ARE DIGITAL FILE FORMATS FOR AUDIO (MUSIC) AND MOST CURRENT COMPUTERS ARE
COMPATIBLE. HOWEVER, IF YOU COPY THE FILE ONTO A CD DISC (CD-R OR CD-RW) AND PLAY
WITH ANOTHER CD PLAYER, YOU HAVE TO MAKE SURE THE CD PLAYER SUPPORTS THOSE
FORMATS, OTHERWISE, THE COPIED CD DISC WILL NOT PLAY. THE SAME THING IS TRUE WITH A
COPIED FILE TO BE PLAYED ON ANOTHER MP3 PLAYER,
EXPORT AND SAVE FOR WAV
AND OGG FORMATS
(AFTER RECORDING |S COMPLETE)
When the song is finished, click { =) on the screen to stop playing.
You can export and save tracks individually, or export and save into one file.
To export and save individually:
1. Highlight the song that you want to save then click the file tab on the audacity interface.
MG] Ect Vies Tramport Tracks Generste Eflect Ала
Кари Cplih
Ep Cera
LATA "
Chose Cale
Lave Project Сы:
Lave Project Aa
Tere Compreitad Copy ol Pregact.
CP by (Thrive fa rd
Lot Metadata
Br &
Esport Audio a PET a E
Export Calertad Audio
Ё вые! | ai
Engi] blips Cela Ea
Export MILA
Ady Cdr
Edit Chaire 2. Select "Export Selected Audio...”
Pago Temp a window will appear as below:
Prank,
Exit Сы! +4
A.
EJ
- OE
No items match your search.
Select the folder, put title in the file name and click the pull-down arrow to select a save type, such as
WAY or OGG format.
3. Choose the file format of the recording that should be exported and put in the title in the file name
and the folder of the location where it will be saved, |.e. desktop. Then click "Save".
4. Edit Metadata window may appear, complete the information then press the OK button.
Use arrow keys (or ENTER key after editing) to navigate fields.
Tag | Value
Artist Name |
Track Title |
Track Number
rem _
Genre
9. Wait for a few seconds until the export & saving is completed.
33
Setting the language
1. Click Edit and select Preferences.
File [Edi] View Transport Tracks Generate Effect
Undo Track Remove Carle Z
Redo Carla Y
A Car Caria X
— - Chelate Cis
= ин Серу Сы! +С
Parte Ctrl+V
Duplicate Cria. Di
Remove Special .
Paste Text to Mew Label Carles Ala Y
Cop Bouwndanes .
Labeled Audio b
Select .
Find Zero Crossings &
Mose Cursor E
Region Save
Region Restore
2. Another window titled with Audacity Preferences will appear. Click the Interface tab and click the
pull down arrow to select the language you wanted.
Display
=f Ergonomic order of Transport Toolbar buttons
5 Show How 10 Get Help” dialog box at program «ласт up
Meter dB range: -60 dB (PCM range of 10 bit samples)
Locaton of Manual From [Internet
Behaviors
— Beep en complenon of longer activities
| Show track name in waveform display
— Retain labels if selection snaps to a label edge
34
Display
+" Ergonomic order of Transport Toolbar buttons
y Show "How to Get Help” dialog box at program start up
Meter dB range: -50 dB (PCM range of 10 bit samples) *
=i Tracks | !
Specttirograms a x
- Import / Export ario em
Extended Import Behavi Euskara
Projects Farsi
Libraries LI Beep on completi e. arcais
Director |) Show track name Gaeilge
Warn | Retain labels if se Caboian
armée | on
Effects Habra
-
3, Then click OK to close the window, The new setting will only be active in the next start -
that means you need to close the Audacity and re-open the software again.
AUDACITY FOR MAC USERS
System Requirements
Audacity for Mac is a Universal Binary for OS X 10.6 and later. Audacity runs best with at least
1 GB RAM and a 1 GHz processor (2 GB RAMIZ GHz on OS À 10.7 and later).
For lengthy multi-track projects, we recommend a minimum of 2 GB RAM and 2 GHz processor (4
GB RAM on OS X 10.7 and later).
1. Please insert the Audacity software disk that comes with your unit. Click the Audacity disk on the
desktop.
33
2. Select Audacity for MAC for Macintosh system.
ann E) AUDACITY
ee ka ka
Audacity Audaciy=POr= mac Audacicy=foe=win
TIPS: To check your computer OS version, you can click the Apple icon then select "About This
Mac”.
Finder File Edit View Go Window Help
The next window will display and the processor type and the OS version will display as below.
8.0.0 About This Mac a
Mac OS X
version 10.7.3
__ Software Update. |
Processor 2 GHz Intel Core 2 Duo
Memory 2 GB 667 MHz DOR2 SDRAM
Startup Disk Macintosh HD
More info... =]
ТМ and © 1983-2012 Apple Мы.
All Rights Reserved. License Agreement
3. Double click on the Audacity for mac folder,
==
Audacity-for-mac
4. Then double click "audacity-macosx-ub-2.1.2.dmg".
ELENA da 6 Sí — 5 MB
Wait a few minutes until this window disappears.
36
Opening "audacity-macosx-ub-2.1.2.dmg"...
| Verifying... Skip |
Then another window will appear.
a __ Audacity 2.1.2
id Audacity
INSTALLATION
Drag the Audacity folder to the Applications shortcut
A
| в
Adan Agp sr
Drag the “Audacity” folder into “Applications” as the instruction show on the window.
>. Double click the Audacity folder and in the Audacity window, files will be displayed in the folder.
ann _| Audacity
ТГ 1
MULTA
PTT ado
& [aie Modifed Kirt
Jan 14, 2016 2-27 AM Apphcarion
№ OJ help jan 11, 2016 2-15 AM -- Folder
Berg CAN). E NT Jan 13, 2016 2:33 AM 719 bytes PLA
LICENSE. tax Jan 13, 2006 2:33 AM 19 KE Plais…cument
Fo ri Jan 1%, 2016 7-26 A -- Folder
F 2 plug-ins Jan 13, 2016 2:33 AM == Роке
READOWME TXT Jan [3, 2016 2:33 AM 956 KE Рави... СНВ
6. Double click the Audacity icon to start the software running, altematively, drag the “orange ball wearing
headphones” icon down onto the desktop toolbar. Click on this icon to run Audacity.
37
CONFIGURING AUDACITY FOR MAC
Audacity Interface for Mac
E] en + — ez CNI o ale rm ODA Ol gt
о = o e
Audacity Interface--Settings and controls
At the top of the main Audacity window, to the right of the play control buttons, you will see the input and
output level meters (labeled L and R). Under the output level meter, is an icon that looks like a microphone.
Next to the microphone is a black arrow that points down. Click this arrow and select Start Monitor. (If you
do not see he input and output level meters, open your Preferences again as described above.)
38
AUDACITY CONTROLS AND BUTTONS
Use the attribute control button at the top of the screen to go to Beginning, Play, Record, Pause, Stop and
End. Use the File, Edit, View, Transport, Tracks, Generate, Effect and Analyze menus to Save, Export, and
Edit the music.
1. Click the ( = 1 |} button to skip to start:
lt
2.Clickthe() ” | ) button to play:
3. Clickthe ( @ |) button to record:
4. Click the ( EE ) button to pause the recording;
OA |
5. Click the ( ) button to stop the recording;
———
6. Click the ( | + |) button to skip to end;
Input level monitor
8. Output level monitor
a Input device
10. Output device
11. Adjust the input volume,
12. Adjust the output volume.
12345 6 7 Я
nll E alam EEC
1 -- 7 pr hd di ı (het iz Ha Чосон В a; 4 a dd 16 ab ad all -17-/ # 6
5 Hi
К Pera BC 6) 7 Da © + =
Core Au a Fi Buili-15 Micrephone —: | 2 (fades) § 5 Boilt=ir Oy | : ; О o
- 18 i Lo Eo i a , 5 6.0 7.0 10 10 Lo 11.9
9 11 10 12
39
AUDACITY PREFERENCES SETTINGS
A few settings will be required before you download the music.
1. Click "Audacity" on the Audacity interface, select "Preferences" and another window will
appear on the screen.
6 ETA ec
8.0 About Audacity...
- ¡CPreferenc nces.. de,
= Services >
a |
AR Hide Audacity %H
1) * Hide Others ХСН
Preferences: Devices
CT "ее
Playback Host: | Core Audio
ote Using: PortAudio V19-devel (built Jan 12 2016 13:27:02)
yal
Interface Playback
vince Device: | Built-in Output
Spectrograms
" Import / Export Recording
Extended Import
Projects Device: Built-in Microphone
Libraries Channels: | 2 (Stereo)
Directories —
Warnings
Effects
Keyboard
Mouse
Modules
EF iE
2. In the window of Audacity Preferences click "Devices” on the left hand side.
Then on the right side within the Recording Device column, set Device to "USB PnP Audio Device”,
Channels to "2 (Stereo).
NOTE: If you cannot find the " USB PnP Audio Device” in the Device list, close the Audacity Software
and re-open and try again. Ensure that the turntable is connected to the computer.
40
BO) Preferences: “Devices
| У interface
Playback Host: | Core Audio
série Using: Portáudio V19-devel (built Jan 12 2016 13:27: ог)
На!
Interface Flaybath
¥ Tracks
Device: | Built-in Output :
Spectrograms
” Import / Export Recordang
Extended Import
Projects Device: Usa PnP Audio Device
Libraries Channels: 2 (Stereo)
Directories
Warnings
Effects
Keyboard
Mouse
Modules
же ik
3. Click “Recording” on the left. Then on the right side in Playthrough column, click the checkbox
beside “Software Playthrough: Listen while recording or monitoring new track”.
In the Sound Activated Recording column, click the checkbox beside “Sound Activated Recording”,
then slide the meter to -36 db. NOTE: Once the "Sound Activated Recording’ Is selected, the Pause
button will not we uring recording.
во. preferences: Recording J
Devices im bee
Playback Overdub: Play other tracks while recording new one
en das Hardware Playthrough: Listen while recording or monitoring new track
To. + Software Playthrough Listen while recording or monitoring new track
¥ Tracks pre
Spéctrogrami
Y Import | Export Audio to buffer 2 milliseconds (higher = mone latency)
Extended Import Latency correction: -150 milliseconds (negative = backwards)
Projects
Libraries Yoo Actiabed Record-rg
Directories + Sound Activated Recording
Warning:
Effects Sound Activation Level (dB:
Keyboard -i6 -36 0
Mouse
Modules
Cancel |— ox |
41
4. Click "Quality" on the left then on the right side in the Sampling column, select "44100 Hz" in
Default Sample Rate and select “16-bit” in Default Sample Format.
|
Ta | Default Sample Rate: | 44100 Hz 3| 44100
Recording | :
ВЕ 3
Interface J Cm
T Tracks | |
Spectrograms Sample Rate Converter: | Low Quality (Fastest) = |
T Import / Export | Dither: | Rectangle 4]
Extended Import |
Projects | High-quality Conversion
| | Sample Rate Converter: | High Quality : |
rectories |
Warnings | | 2 | Triangle " |
Effects |
Keyboard
Mouse
Modules
| Cancel | (ok)
fe
5. Click “Libraries” on the left then on the right side in MP3 Export Library column, check if the
program has detected and shown the MP3 Library Version there. If shown, skip and forward to
step 6.
ann Preferences: Libraries
Devices NPY Export Library
Playback MP3 Library Version: LAME 3.98.2
ri MP3 Library: | Locate...
Te LAME MP3 Library: | Download
¥ Tracks FFmpeg lmport Export Library
Spectrograms
T Import / Export FFmpeg Library Version: FFmpeg library not found
Extended Import FFmpeg Library: | Locate...
| Projects FFmpeg Library: | Download
Directories
Warnings
Effects
Keyboard
Mouse
Modules
Cancel | OK |
If "MP3 export library not found” is displayed, you must find the “LAME”. Click “Locate...” button then
a window named "Locate Lame" appears to find where the "LAME" is. Click the “Browse …” button to
find tt.
Audacity needs the file libmp3lame.dylib to create MP3s.
Location of libmp3lame.dylib:
|Vusr/local/lib/audacity/libmp3lame.dylib | ( Browse... )
To get a free copy of Lame, click here --> | Download
(Саке!) окт)
If you cannot find it or the LAME file you found is not compatible, click the "Download™ button and a
website will show automatically. Scroll down the webpage to find a title named "Mac OS X". Click the
“LAME download page” and another website will show automatically.
Mac O35 X
Om O05 X00 6 or later Admemaratee (and occamonaliy mdl) permessons may be needed on some machanas ho read the LAME lrary the mstaller places ©
‘ми era mudar
1 cade Y ficuty plaga desmizad the zp vernos Lime Library «J 58 2 for Audacéy cn CSI me Nom *Alemates zp deenicad lor Lame J 90 77 below and
он Вы rte actions
s Installer
1 Goto he exter
2 Domticad Lame Library v 338.7 lor Audacity on 05) .dmg
) When you have inahed desnizadeg double-chci the deg lo mount E Then go ln the Fede (e Saban tha "Lam Library 1] 95 2 ler Audacity” vitual disk mage wd be
ixtracted and Fourted autormatcaly aber бела)
4 Dogble-chcin Lame Lbrary 13 96 7 lor Audacty pig” the standard 05 1 ingtaber wil stat
5 Chick Breugh te segs à the Installer pecectng Be defaults n ol cases. Bay wil metal the LANE angry bmp Tame did" m u cab ach
E Audacity ¿hold detect LAME automatically shies you трой 24 МР} IF Audacey carve find LAME
1 (cic Audacity » Preferences these chooté Liéranes” on the lek
2 (ick Locate " under WP) Expos Library”. Man Browse...“ in the Locate Lame” dialog
1 Tha Vier 1 отр ОБЬ” endos mil cpen at u cab mdacty select Temple dy” chi "Opes” te OB amd “ON
Find and Click the "MAC OSX downloads”
Click Here, Windows User ----> Jump straight to Windows downloads
Click Here, MAC OSX User —> Jump stralght ¡SAC OSX domnloz3)
Scroll down the webpage.
43
For FFmpeg and LAME on Mac OSX dick below:
If Audacity does not detect FFmpeg, download the ZIP option, extract the files inside to a well known folder, then open
Audacity, go to Library Preferences and configure € to search on the wel known folder you extracted Che Mes Lo.
For Audacity 1.3.3 or later on Mac 05 X 10.4 and greater (Intel or PPC),and Audacity 1.2.5 on 05 X 10.4 and
later (Intel)
— acity on OSX ep verson(ers)
FFmpeg 2.2.2 ZIP for Audacity 2.0.6 or later on 0S X 10.4 and later (Intel or PPC) (THIS IS NOT LAME!):
fimpeq-mac-2.2.2 70 = DMG versie
FFmpeq Binary for Audacity 1.3.13 to 2.0.5 ONLY (see previous link for 2.0.6) 05 X 10.4 and later (Intel or
PPC):
EEmoea [0.6.2 OSX 10.4+ DMG
) (Zip version here or if problems with the mstaller, try this new one
You will notice a form showing the LAME for all version systems. Find a title named “For Audacity
1.3.3 or later on Mac OS X 10.4 and greater (Intel or PPC), and audacity 1.2.5 on 05 X 10.4 and
later {Intel)” and then click "Lame Library v3.98.2 for Audacity on 054 .dmg” or here to download
the file, Then locate LAME and click O,
Audacity needs the file libmp3lame.dylib to create MP3s.
Location of libmp3lame.dylib:
To get a free copy of Lame, click here --> Download )
( Cancel Ca»
6. Click OK to close the Preferences interface.
SETTING THE RECORDING INPUT LEVEL
It is recommended that the recording input level is adjusted prior to starting to record.
Slide the output level to about 0.5, slide the input level to 0.3, then get your record ready.
A HT D
+
RECORDING OPERATION
To download music and save into computer:
1. Place the record on the turntable.
2. Move the tone-arm over to the record to start playing.
3. Click the Record ( * ) button to start recording.
The waves (left and right tracks) will show on the interface.
E, » ie - 11:
A oes E бя ° = rara win 65 MAPLE
Coen hog A DE Pre 2 Pim. TM haa Da E || >.
ao ne
Ei ia
[PAM TANYA" OUT
а) МИ НЫЕ
СРО ТАРЫ NT
FA AR AO Geo Te MTR Mam RE Legh Md Mites
44100 fa) os ua CistCacó: | Gorman
Cl bp E A e A y e E ra Barr 4 а)
4. At end of the song, click “pause” ( !! } button on computer and press Stop button on turntable,
move cursor to the wave area and left click at the end of the song.
For the next song, replace the album or move tone-arm to another desired song. Press Play button
on the turntable to start playing the next song. Immediately press “pause” ( » ) button on computer
and downloading will continue and another R/L track will appear on the interface.
NOTE: Pause button will not work during recording process if the ‘Sound Activated Recording’ in the
Preferences Recording is selected. Clear the checkbox next to the ‘Sound Activated Recording’ if
you want fo pause recording manually.
о. Repeat steps 3 and 4 until you have finished downloading.
NOTE: Do not click stop button on computer while continuously downioading songs. Remember fo
click pause button in between your desired songs. Press stop button on the computer only when all
your desired songs have been downloaded.
After your have finished downloading, you may play back the songs through your computer. In stop
mode, simply click (| «| ) SKIP TO START button then the ( > ) PLAY button.
45
DIVIDING TRACKS
1. Press ( > ) button to return to the beginning of the first song.
2. Move cursor to the wave graphic area, left click the mouse and hold then drag from left to right.
Release the mouse when the highlighter has reached the end of the first song.
3. Click “File” tab then select “Export Selected Audio …”.
4. The window will pop up a dialog box for you to complete the Metadata. Click OK button when
completed.
Mew MN
Open... мо
Open Recent +
Close sE
Save Project Ms
Save Project As...
Save Compressed Copy of Project...
Check Dependencies...
Edit Metadata...
{ME
{MEL
Apply Chain...
Edit Chains...
Page Setup...
Print... |
9. Then a window appears, select your music file location and format and type in your file name.
Click “Save” and the song is saved on the computer.
Save As: track 1| .
I dk + = EA (3 ыы 5 a
| FAVOEITES
A Applications
Lo Audacity
“E Documents
— Desktop
o Dorada
|| Movies
J2 Music
El Fictures Chber uécormpreuted Ales
| Fai wi AIFF Apple) signed LÉ bit PCM
WAY (Microsoft) sigaed 16 bit PCR |
GSM 6. 10 WAY [mobile
Optic,
Cupp Warbis Files
FLAC Filey |
New Folder | MP2 Files Cancel | [Ea ]
(eater! program)
MAA (AAD Files [FRrpegl
ACI Files (FFmpeg)
AME (rarroes hard Files OEmpegó
ALA {version 2) Files (FFmpeg
Custom FFmpeg Export
46
B. Edit Metadata window will appear. Complete the information then click OK. Wait for a few
minutes until the saving is complete.
NHN zz Edit Metadata и
Use arrow keys (or RETURN key after editing) to navigate fields.
Tag Value
¡Artist Name |
Track Title
Album Title
Track Number
Year
Genre
Comments
Add Remove Clear
Genres Template
Edit... | | Reset... | Load... | | Save... J Set Default
Cancel ——
EXPORT AND SAVE FILES (AFTER
RECORDING IS COMPLETED)
EM When the recording is finished, click the ( ) on the screen and stop the cassette playback.
YOU have a music download on your computer now.
E YOU may play back the song through your computer.
E Simply click the ( — ) to play,
47
1. To export and save individually, click the “File” tab on the Audacity window then select
“Export Selected Audio..."
New MN
Open... хо
Open Recent E
Close MY
Save Project "ES
Save Project As...
Save Compressed Copy of Project...
Check Dependencies...
Edit Metadata...
Import E
Export A ME
e port Selected Audio
Export Labels
Export Multiple... ОЖ!
Export MID
Apply Chain...
Edit Chains...
Page Setup...
Print... |
To export and save into one file, click the “File” tab on the Audacity window then select
"Export Audio”,
dE Edit eu Tir k
New HN
Open... so
Open Recent +
Close EW
Save Project #5
Save Project As...
Save Compressed Copy of Project...
Check Dependencies...
Edit Metadata...
Import E
Ex ected Audio...
Export Labels
Export Multiple... EL
Export MIDI
Apply Chain...
Edit Chains...
Page Setup...
Print...
48
2. A window will pop up after clicking Export. It will default to the MP3 format, but you also can
select other formats by clicking the arrow located at the right of the MP3 Files,
== Mad |
Save As: track 1 | (=) /
er | E album — в] (а 3
FAVORITES Date Modified |
DEVICES
Other uncompressed files
AIFF (Apple) signed 16 bit PCM |
WAV (Microsoft) signed 16 bit PCM =
CSM 6.10 WAY (mabile)
| Options... | |
| e Ga =
Ogg Vorbis Files
FLAC Files
MPZ Files
(external program)
MAA (AAC) Files (FFmpeg)
АСЗ Files (FFmpeg)
AMR {narrow band) Files (FFmpeg)
WMA, (version 2) Files (FFmpeg)
Custom FFmpeg Export
3. Complete the "Save As" and Save-in location, click the Save button and the Edit Metadata
window will display. Complete the information if necessary then click OK and wait a few
minutes until it is finished saving.
eno EditMetadata |
Use arrow keys (or RETURN key after editing) to navigate fields.
Tag Value
[Artist Name |
Track Title
Album Title
Track Number
Year
Genre
Comments
| Add || Remove | | Clear |
Carre Template
| Edit... | | Reset... | | Load... | | Save... | | Set Default |
[Cancel | Foe _
49
BOO track 1
Exporting selected audio at 128 Kbps
sn |
Elapsed Time: 00:00:07
Remaining Time: 00:00:24
| Stop | | Cancel |
TROUBLESHOOTING GUIDE
if you experience any problems with your unit, kindly consult the following guide prior to calling your dealer.
NO SOUND:
« If you are not getting any sound into the software application, go back to the preferences as shown above
and make sure that you have selected the USE PnP Audio Device for the recording device in the devices.
« Power Cycle: Close Audacity, tum off the turntable, unplug the USB Cable. then plug in the USB Cable,
turn on the turntable and reopen Audacity.
* If you ara not able to hear any audio as you play the record, please click on the microphone drop-down
arrow and select Start Monitoring. This will enable you to hear the audio from the turntable, even if you have
not record-enabled the Audacity application.
Va E й 4
= po т и я = Е e E mE TA a re Tu ;
Pa =33--30--27 Click to Start Monitoring -9—6—3—0
Start Monitoring ab I о +
; Preferences. | т
0... FT BUNT=IN t «|
Check the microphone slider to make sure that it is at full volume, all the way to the right as shown below, If
you find the recording sounds low or distorted, adjust the microphone slider.
FE"
® If you still do not have the fluctuating wave on the interface during recording, or the recording sounds
unsatisfactory, adjust the recording volume as follows:
Click the launchedpad icon
30
Then find “System Preference” and double click it.
In the new interface, find the "Sound" icon and double click it.
À
Sound
Adjust the Output volume under “Sound Effects
aan Sound
Output
Sound Чара Ч 6
Input |
Play sound effects through: | Internal Speakers
Alert volume: mi
— Y
| Play user interface sound effects
| Play feedback when volume is changed 7
et
Under “Input”, select “USB PnP Audio Device” and adjust the “Input volume”
51
809 Sound
| Sound Effects — Output MET
Select à device Nor sound input
Fearne Type
Internal microphone Built-in
Line In Ji
wll LISE PnP Audio Device
Settings for the selected device:
meva: 8, —————— E
input level: Y 8 7 0NOANNNNNNNSA
Output volume: of >-— +5) Mute
of Shaw volume in menu bar
POOR SOUND QUALITY:
« Check your stylus to make sure it is secured to the tone arm. The stylus must be connected
to the tone arm whenever using the turntable.
« Make sure that your RCA plugs are plugged into a source or not touching bare metal. If you are
experiencing noise through the USB, you may have interference from the RCA plugs. Ensure the
USE cable is not touching or near any other cables.
« If you experience any odd sounds coming from the recording, try closing all applications and
restarting the computer. Only run Audacity while recording.
specifications
GENERAL
Power Requirements ree... AC 120 V- 60 Hz
Power Consumption_____________________30wW
Dimensions (WxHxDy____ 453 x 335 x 243mm | 17.8 x 13.2 x 9.6 in (approx.)
VISITE == ee 7.65 Kg. | 16.86 Ibs (approx.)
AMPLIFIER
Outpul Power o... 5 W+5WW
Frequency Response... uneeseses 60 to 20, 000 Hz
SPEAKER SYSTEM
Input Power ___ noe Max, 6VV
FM Radio
RANGE eee... aeanananama naaa 55 to 108 MHz
CD PLAYER
Frequency Response ______.___..________60 to 20, 000 Hz +/-4 dB
=ignal-to-Noise Ratio... | 29 ОВ (1ЕС-А)
CASSETTE PLAYER
Track System____...........… cc 4 Track, 2 channel stereo
Tape Speed______________________________48cm'sec
Wow and Flutter _______ 0.4% (WRMS)
Frequency Response____________._._._... 125106300 Hz +/-6 dB
RECORD PLAYER
Motor DCsarvo molor
Drive Syslelm........—— ee =—==—=mm meo Belt Drive
SDC. ща a ES 3>-1/3mpm, 45 rpm and 78 mm
N Ratio неее More than 20 dB
Carlndge Type_______ | Ceramic Stereo Carndoe
SIS eee. JTRRS-300
BLUETOOTH
Bluetooth Versión ere. Bluetooth V2.1+EDR
Bluetooh Profiles eres AZOP, AVREP
Bluetooh Frequency range _.. 2.402GHz-2.480GHz
Operating Distance ee... 10 meters (33 ft.)
USB
PIDO vacio nt eto cinta na i Eg USB series B connector
Recording. e rrneesesananananoas USB to PC record for vinyl record, CD, Cassette, AUX and
Bluetooth.
Ful-Speed 4010000 USB 2.0 full speed
33
Troubleshooting Guide
Symptom Possible Cause Solution
- Unit will not power on. - Unit is unplugged. + Connect the unit to the AC
power supply.
- No sound output from « The volume level is set too low. | « Adjust the volume.
j speakers. « The input selector does not + Select the correct input
o match the playback source, source.
Ш
= | - Noise/Distortion in The unit is too close to a lV set | - Turn off the TV or other
о sound output, or another interfering device. appliance, and relocate
the unit.
« Unit fails to respond. - It might result from external + Disconnect the power cord
factors such as ESD and external audio device.
(Electro-static discharge). Re-plug the power cord
after one minute.
" - The tape does not play. | + The cassette tape 15 not + Insert the cassette tape
a inserted properly. correctiy.
a - The tape has reached the end. | - Flip the cassette.
- Canñot listen to any «The station is not tuned-in + Properly tune-in the
station, or signal properly, desired station.
= appears weak. «À TV set is being used nearby | + Turn-off the interfering TV
= and is interfering with the radio sel.
reception.
= « The sound is distorted. | + The antenna is not oriented « Re-orient the antenna until
properly. reception improves.
« CD stops immediately « The CD is inserted upside - Insert the CD with the
after starting, or unit down. printed side right-side up.
pauses or stops during | - The CD is dusty or dirty or there | - Carefully clean and dry the
play. Is condensation on the CD. CD.
- No sound. - The CD player 1s paused. « Press the PLAY/PAUSE
button.
x CD playback is noisy, «The CD is scratched, damaged | - Replace CD with an
> or playback stops or or warped. undamaged one.
= skips. « The disc is very dirty. + Carefully clean the CD.
5 - CD) tray will not open. - AM/FM mode is selected. « Select AUX, PHONO, CD,
| _ or TAPE mode.
- Buttons are not - The unit is processing « Wait until the unit finishes
functioning correctly. information (“=== Busy" is processing.
displayed).
« The unit needs to be restarted. | + Turn the unit off, then on
again.
» Decline in turntable - The turntable stylus is worn out. | » Replace the stylus.
© audio performance.
O
Ir
a
« No sound.
« The unit is not switch to
Bluetooth mode.
« Your device's and/or the unit's
volume is not turned up.
« Your device is too far from the
unit or there is some obstacle
between your device and the
+ Ensure the unit is switched
to AUX / BT mode,
« Move your Bluetooth
device closer to unit,
- Turn up the volume on
your portable device
and/or the unit.
fone arm
« Unplug RCA plugs and USB
cable near any other cable
ai
© unit. - Turn off your Bluetooth
= device and unit, then
= power them both back on.
a - Sound is garbled. - Your device's and/or the unit's — | + Tur down the volume on
volume Is not adjusted your device/phone and the
properly. unit,
«Unable to pair with a + Your device doesnt have + Confirm that your device is
Bluetooth device. Bluetooth connectivity, Bluetooth compatible.
« The Bluetooth pairing is not « Repair the unit and device
successful. again.
- NO sound. - Have not selected the USB - (59 back to the
PnP Audio Device for the preferences as shown
recording device in the devices. | above and make sure that
- Microphone slider it is not at full | you have selected the
volume USB PnP Audio Device for
the recording device in the
devices,
« Close Audacity, turn off the
turntable, unplug the USB
Cable. Then plug in the
USB Cable, turn on the
turntable and reopen
Audacity.
« Please click on the
о microphone drop-down
Hr arrow and select Start
a Monitoring.
= + Adjust the microphone
E _ slider.
+ Poor sound quality + The stylus no connected to the | - Check your stylus to make
sure it Is secured to the
tone arm.
Make sure that your RCA
plugs are plugged into a
source or not touching
bare metal. If you are
experiencing noise
through the USB, you may
have interference from the
RCA plugs. Ensure the
USB cable is not touching
or near any other cables,
"a
For further assistance with your product, call Innovative Technology at
TOLL FREE# 1-87 7-ITECH-97 (1-877-483-2497).
Please note: As a result of continual improvements, the design and specifications of this product are subject to
change without notice.
Made in China.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Other trademarks and trade names are those of their respective owners.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one of the following
measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARMING: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
50
CALIFORNIA PROP 65 WARNING
"WARNING" This product contains chemicals known to the State of California to cause birth defects or
other reproductive harm. For more information on these regulations and a list of chemicals, log on the
following website address:
http: ("www_oehha ca. .gov/prop6s html
Victrola is a registered trademark of Innovative Technology Electronics Corp.
Innovative Technology Electronics Corp.
Limited Warranty: 90 Days Labor, One Year Parts
Innovative Technology Electronics Corp. (IT) warrants the product to be free from “Defects” in
materials under normal use for a period of “One Year from the date of the original purchase. The
Warranty is “Mot” transferable. IT agrees, within the initial "90 Day” period, to repair or replace the
product if it is determined to be defective at “No Charge”. It is further agreed that IT will cover the cost
to repair or replace damaged “Parts” only for a total period of "One Year from the date of the original
purchase. The warranty does not cover cosmetic damage, antennas, AC cords, cabinets,
headbands, ear-pads, or damage due to line power surges, connection to improper voltage supply or
settings, misuse, mishandling, accident, acts of God or attempted repair by an unauthorized service
agent. To obtain service, the purchaser MUST present an original sales receipt / proof of
purchase. Please contact us at www.ithomeproducts.com to request an RMA (Return
Maternal Authorization) number to return products for service or replacement. Returns
without an EMA number on the package will be refused and returned to sender. Upon receipt of the
returning item and our full inspection (IT) may issue a replacement to customer for the same item or
of one that has equivalent value and features. To return an item, supply full name, return address,
phone number, item purchased, receipt of purchase and reason for return to obtain RMA number.
All returns must be in the onginal packaging or reasonable substitute to prevent damage.
Customer “Must” include full name, shipping address and telephone number inside of package. No
return will be shipped back to a PO Box or APO address.
Please include your check or money order in the amount of
+ USD$5.00 for items $10.00 to $39.99 (Price Paid Per Unit)
« USD$10.00 for items $40.00 to $99.99, (Price Paid Per Unit)
* USD$16.00, for items $100.00 and up. (Price Paid Per Unit)
« Shipping fees are non-refundable
37
to be payable to Innovative Technology Electronics Corp. (for handling and return
shipping charges) (IT) will not be responsible for delays or unprocessed claims resulting
from a purchaser's failure to provide any / all of the necessary information.
Send all inquiries or RMA request via our website www. ithomeproducts.com/suppont.
Innovative Technology Electronics Corp,
1 Channel Drive
Port Washington, NY 11030
Toll free: 1-877-483-2497
Website for support: www.ithomeproducts.com/support
There are no express warranties except as listed above.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY 1S THE EXCLUSIVE
REMEDY OF THE CUSTOMER, (IT) SHALL NOT BE LIABLE FOR AMY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS
PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
some states do not allow the exclusion or imitation of incidental or consequential damages, or
imitations on how long an implied warranty lasts, so the above exclusions or limitations may not
apply to you. This warranty gives you specific legal nghts and you may also have other rights, which
vary from state to state.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement