PowerVerter APS Inverter/Charger

PowerVerter APS Inverter/Charger
PowerVerter APS Inverter/Charger
Reliable Power Source for Uninterruptible Emergency Backup Applications
Model #: APS2012
12V DC input; 120V AC output; hardwired
2000 watts continuous output
4000 watts peak output for an extended period
Advanced battery charger
Fast load switching with less transfer time
DESCRIPTION
Tripp Lite's APS2012 3-function DC-to-AC inverter with auto line-to-battery transfer and integrated charging system serves as an extended run
UPS, a standalone power source or an automotive inverter. PowerVerter APS Inverter chargers accommodate "peak surge" demands by
delivering more output power than their continuous rating.
PowerVerter APS Inverters supply up to double their output to easily handle equipment start up and motor cycling requirements. A
DoubleBoost™ feature provides up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold start
heavy-duty tools and equipment. An OverPower™ feature delivers up to 150% of the continuous output for up to 1 hour. When hardwire input
AC cable is energized, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, 20/60 amp
selectable charging system. In UPS mode, the APS system responds to blackouts and brownouts with an uninterrupted transfer to batteryderived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling). Reliable large
transformer design with efficient PWM sine wave output and frequency control powers resistive electronic loads or large inductive motors,
compressors and other items with high current needs on startup. Supports an unlimited amount of runtime with any number of user-supplied
batteries connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet / gel battery types
and selectable line to battery power transfer voltages.
KEY BUYING POINTS
Functions as an extended run UPS system, standalone power source and automotive inverter
Includes hardwire AC input and auto-transfer to enable battery charging and automatic UPS support for blackouts and brownouts
2000 watts continuous output power; provides up to twice this rating for momentary startup of inductive loads
Battery runtime is dependent upon the size and number of user-supplied batteries in 12Vconfiguration
Hardwire input and output connections supported, DC input terminals for 12V battery connection
Converts 12V DC to 120V AC
Frequency control for operating stability
Advanced 20/60 amp selectable, 3-stage battery charger and selector switch for gel or wet cell batteries
Resettable circuit breaker protects APS against system overload
Switch allows user to select between off, auto-invert and charge-only settings
6 diagnostic LEDs indicate AC present, on battery, overload, & battery voltage level (high, medium, & low)
Configuration switches to allow the user to select the high and low voltage for the unit to automatically transfer from AC power to
battery backup
Coated internal circuit boards offer continuous operation in humid environments (0-95%, non condensing)
RJ45 port allows connection of APS remote switch (part# APSRM4)
Allows unlimited runtime capability by allowing the use any number of user-supplied batteries
TYPICAL APPLICATIONS
Extended Run UPS Configure as a UPS for long-term battery support of telecom systems, security alarms, computer systems and
various other motorized and electronic loads.
Standalone Power Alternative power source for use in off-grid, backwoods, alternative energy and export applications where
commercial power is not continuously available.
Automotive Connect to an automotive electrical system to run power tools, computers, electronic test equipment, home entertainment
and other AC appliances in fleet service vehicles, over-the-road trucks, campers, RVs, minivans and more.
OPTIONS & ACCESSORIES
Battery - 12 volt / 75 amp-hour (model # 98-121)
Battery Cabinet holds 2 batteries; includes cabling (model # BP260)
External switch for wired remote control of APS unit (model # APSRM4)
PACKAGE INCLUDES
APS2012 inverter/charger
Instruction manual with warranty information
COMPLETE SPECIFICATIONS
SYSTEM OVERVIEW
System overview:
Reliable 12V DC to 120V AC power inverter system serves as an automotive inverter, a
battery charger and an uninterruptible power supply. Extended runtime capable with any
number of user supplied batteries. 2000 watts continuous / 4000 watts peak. Requires
hardwire input & output connection.
Voltage compatibility:
12V DC / 120V AC
Frequency compatibility:
60 Hz
OUTPUT
Output watt capacity (watts):
Continuous - 2000 watts, Overpower (up to 1 hour) - 3000 watts, Double-Boost wattage (up
to 10 seconds) - 4000 watts
Output nominal voltage:
AC OUTPUT: 120V AC nominal, DC CHARGER OUTPUT (DC): 12V DC nominal
Output voltage regulation:
LINE POWER (AC): Maintains 120V nominal sine wave output. INVERTER POWER (AC):
Maintains PWM sine wave output voltage of 120 VAC (+/-5%). DC CHARGER OUTPUT
(See battery recharge rate section)
Output frequency regulation:
60 Hz (+/- 0.3 Hz)
Outlet quantity / type:
Hardwire AC output
Overload protection:
Includes 25A input breaker dedicated to the charging system and 20A output breaker for AC
output loads
INPUT
Maximum input amps / watts:
DC INPUT: Full continuous load - 192A at 12V DC. AC INPUT: 38 amps at 120V AC with full
inverter and charger load
Input connection type:
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box
with cover plate
Input cord length:
DC INPUT: User supplies cabling. 4 gauge or larger recommended. AC INPUT: user
supplies hardwire input cabling
Recommended electrical service:
DC INPUT: Requires 12V DC input source capable of delivering 192A for the required
duration (when used at full continuous capacity). For automotive applications, professional
hardwire installation with 400A minimum battery system fusing is recommended.
BATTERY
DC system voltage:
DC input operating range 10-15V DC.
Battery recharge rate:
Includes selectable 25 / 100 amp DC charging system with selectable profiles for vented wet
cell and sealed gel cell batteries. Optional use battery equalize charge function equalizes the
charge level when used with multiple batteries (see manual for detailed charger information).
Expandable battery runtime:
Runtime is expandable with any number of user supplied wet or gel type batteries
LEDS ALARMS & SWITCHES
Front panel LEDs:
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and
battery charge level (7 levels reported). See manual for sequences.
Switches:
3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting
that enables distant on/off control of the inverter system when used in conjunction with
optional APSRM4 accessory when used in inverter mode. In AC uninterruptible power mode,
"auto/remote" setting enables automatic transfer from line power to battery power - to
maintain continuous AC power to connected loads.
SURGE / NOISE SUPPRESSION
AC surge suppression:
AC surge suppression not included
PHYSICAL
Shipping weight (lbs):
43.8
Shipping weight (kg):
19.9
Unit weight (lbs):
39.6
Unit weight (kg):
18.0
Unit Dimensions (HWD/in):
7.25 x 8.5 x 16.25
Unit Dimensions (HWD/cm):
18.4 x 21.6 x 41.3
Shipping Dimensions (HWD/in):
13.5 x 15 x 21.5
Shipping Dimensions (HWD/cm):
34.3 x 38.1 x 54.6
Material of construction:
Polycarbonate
Form factors supported:
Mounting slots enable permanent placement of inverter on any horizontal surface (see
manual for additional mounting information)
Cooling method:
Fan
ENVIRONMENTAL
Operating Temperature:
32-104 Fahrenheit / 0-40 Celcius
Relative Humidity:
0-95% non-condensing
LINE / BATTERY TRANSFER
Transfer time from line power to battery
mode:
4-6 milliseconds
Low voltage transfer to battery power:
User configurable to 75V, 85V, 95V & 105V
High voltage transfer to battery power:
User configurable to 135V, 145V
WARRANTY
Product warranty:
1 year (Outside the U.S. and Canada, call for warranty information)
SPECIAL FEATURES
Appearance:
Black color
Load Sensing:
Optional load sense function enables automatic inverter shutoff and startup as connected
equipment is powered off and on. Front panel load sense potentiometer can be set to shutoff
or turn on inverter power in response to loads of any level, up to 150 watts.
BATTERY PACK ACCESSORY (optional)
Battery Pack Accessory (optional):
98-121 sealed lead acid battery (optional)
The policy of Tripp Lite is one of continuous improvement.
Specifications are subject to change without notice.
Therefore, your product may vary slightly from what is currently listed.
Tripp Lite World Headquarters
1111 W. 35th Street
Chicago, IL 60609 USA
Customer Support
(773) 869-1234
© 2004 Tripp Lite. All Rights Reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement