Quick Setup Guide 1 2 3 4 Connecting Your TV Watching
3-210-794-11(1) KDF-46E3000 KDF-50E3000 1 Your New ™ BRAVIA LCD Projection HDTV Congratulations! Your new BRAVIA™ opens the door to the “Full HD Experience”. This guide will explain how to get the most from your new High Definition TV. Quick Setup Guide For further information, see the Operating Instruction Manual supplied with the TV. Please retain this guide for your future reference. Learn more. Visit the Sony HDTV Learning Center www.sony.com/HDTV Please take these steps before you power up your BRAVIA™: ■ Register online at: www.sony.com/registration (from U.S.A.) www.SonyStyle.ca/registration (from Canada) ■ Make sure you’ve removed all accessory contents from packaging. ■ Install 2 AA batteries (supplied separately) in your remote control. ■ Give your TV 4 inches (10 cm) of space behind it to properly ventilate. The Four Steps to a Full HD Experience: Set, Sound, Source, and Setup Along with your BRAVIA™ TV set, a complete HD system requires an HD sound system, a source of HD content, and proper setup connection with components such as your HD cable or satellite box. You must get HD programming to experience the stunning detail of HDTV. The quality of the image you see on your BRAVIA™ can only be as high as the quality of the signal it is displaying. This chart shows the different signal types and how to access them. Best Signal Performance For Your Convenience Please contact Sony directly if you have questions on the use of your television after reading your Quick Setup Guide and Operating Instruction Manual. Contact Sony Customer Support at: http://www.sony.com/tvsupport Or to speak with a support representative: United States Canada 1-800-222-SONY (7669) 1-877-899-SONY (7669) Comments Sources 2 Connecting Your TV Your BRAVIA™ must be properly connected to components such as sound system and cable or satellite box. See reverse side of this poster for sample connection diagrams. ■ ■ Turn off and unplug all components before making connections. Do not turn on the TV until connection setup is completed. Audio/Video Performance Input Connector Video Connection HDMI 1 HDMI 2 HDMI connection* Component 1 Component 2 Component 3 Audio Connection HDMI cable carries both video and audio signals. Separate audio cable is not needed. (*When HDMI is connected to DVI with an adapter, a separate audio L/R is necessary.) High or Standard Definition Quality 1080p, 1080i, 720p, 480p, 480i, PC (Compatible with HD or SD content) 1080i, 720p, 480p, 480i (Compatible with HD or SD content) Component connection Audio L/R S VIDEO connection Audio L/R Video 1 (Use this connector in place of composite video connector) Video 1 Video 2 Video 3 Composite video connection 480i (SD content) Audio L/R High Definition Content Best Picture Quality 16:9 Aspect Ratio HD Over-The-Air Antenna HD Cable Subscription/ Programming HD Satellite Subscription Digital Content Good Picture Quality Aspect Ratio based on Program Over-The-Air Antenna Digital Cable Subscription Digital Satellite Subscription HDMI (High-Definition Multimedia Interface) cables are the standard for connecting HDTV. They are built to properly handle high bandwidth, uncompressed video and multi-channel audio—all in one cable. Analog Content Original TV format 4:3 Aspect Ratio Over-The-Air Antenna Cable Subscription Connecting a PC to Your BRAVIA™ ■ May require DVI-to-HDMI adapter and separate audio connector. ■ Connect PC’s audio output when using a Digital Video Interface (DVI) connection. ■ Refer to BRAVIA™ Operating Instruction Manual for more information. Contact your cable or satellite provider to upgrade your service to HD. Receive over-the-air HD broadcasts with an HD-quality antenna (www.antennaweb.org) and discover the wealth of entertainment now available on super-high-resolution Blu-ray Disc™. (Shown with video and audio connectors) What is HDMI™? To learn more about HDTV, visit www.sony.com/HDTV Please Do Not Return the Product to the Store ©2007 Sony Corporation Printed in U.S.A. 3 Running Initial Setup Initial Setup instructions are displayed on the screen when your BRAVIA™ is powered on for the first time. 1 Select the language for the OSD (on screen display). 4 Watching Your TV To Access Initial Setup by Remote Control If you did not follow the Initial Setup screen the first time, press the HOME button on your remote control to display the TV Home Menu/XMB™ (XrossMediaBar) and select the Initial Setup icon under the Settings category. Step 1 of 5 Initial Setup 1 XMB™ (XrossMediaBar) appears. Please select a language. Language settings will apply to on screen display as well as default audio for digital channels. Highlight a choice and press to continue. HDMI Settings Select Your Content Source Whether you are watching cable, satellite or broadcast TV; playing a VCR, DVD or Blu-ray Disc™; or connecting to your PC, you need to choose the correct Input using your remote control: ■ Press the HOME button on your remote control to display on-screen the TV mode or External Inputs selection menu; OR ■ Press the INPUT button repeatedly until your selection is highlighted on-screen. XMB™ (XrossMediaBar) with focus on Settings. Select Settings to customize your TV. Product Support Clock/Timers General Sound English Adjust Screen Shape and Aspect Ratio Español Français 1.2.3 2 Connect either Antenna or Cable to your TV. Step 2 of 5 Initial Setup Select Auto Program to advance to the Auto Programming. Auto Program allows the TV to tune channels directly from your cable or antenna feed. If you are using only a cable or satellite set top box, it is not necessary to run Auto Program. In this case, choose “Skip”. Auto Program may take 30+ minutes to complete. If you are not using the VHF/UHF/CABLE connection to TV, you can cancel the Auto Program by selecting the Skip option. VHF/UHF/CABLE Auto Program Skip 3 Your TV will detect the type of signal connected and will start scanning for the channels. Initial Setup TV 2 Select Initial Setup icon. Settings Start Initial Setup now? Some channels may be overwritten. 1.2.3 Yes No Step 3 of 5 Please allow 30+ minutes to complete. Pressing or will cancel auto program. Channels Found Analog: 58 Digital: 0 Customize Sound and Picture Quality Searching... 4 Follow on-screen instructions to complete setup and begin viewing your TV. Step 5 of 5 Initial Setup Select “OK” to use your TV OK High Definition and Standard Definition signals are transmitted with different aspect ratios (the width-to-height shape of the image). Most HD signals use a widescreen aspect ratio of 16:9. Most SD signals use a boxy 4:3 aspect ratio. The 16:9 aspect ratio looks perfect on your BRAVIA™, but a 4:3 image must be adjusted to look right. You can: ■ Adjust your TV so boxy 4:3 images are automatically re-configured (zoomed or stretched) to fit the wide TV screen; OR ■ Watch SD content in its original, boxy format with wide black bars surrounding the image to fill in unused space (for example, you may prefer to watch an old classic movie in its original 4:3 format, not reconfigured for a wide screen). ■ Press the WIDE button on your remote control to display the Wide Mode setting of your preference. ■ Visit www.learningcenter.sony.us/HomeAudioandVideo/Televisions/Research1/TheBasicsofDTV for more information. To Do List When the Initial Setup is completed, consider carrying out these items: Set Clock Set Closed Captions (CC) Set Parental Lock Show/Hide Channels Label Inputs (skip inputs) Speakers On/Off For details, refer to your BRAVIA™ Operating Instruction Manual. You can choose optimum sound and picture settings to match the content you are displaying on your TV: ■ Press the HOME button on your remote control and select Picture or Sound. Choose the appropriate setting for your content. ■ Use the remote control OPTIONS button to quickly adjust sound and picture quality. ■ Refer to your BRAVIA™ Operating Instruction Manual for more information. To learn more about HDTV, visit www.sony.com/HDTV Screen Video Options TV XMB™ (XrossMediaBar) with focus on TV mode. Select the channels from here or use the 0-9 number buttons on your remote control. 7 8 Cable 8.1 KFMB-DT 9 10 10.1 TV 11 XMB™ (XrossMediaBar) with focus on External Inputs. Select connected device from here or use the INPUT button on your remote control. Video/Component2 Video 3 Component3 HDMI1 HDMI2 TV HD Basic Connection HD Basic Connection with A/V Receiver Cable/Antenna HD Basic Connection with Home Theater System HD Antenna Cable/Antenna Rear of TV Splitter Splitter Rear of TV Rear of TV Blu-ray Disc™/DVD Blu-ray Disc™/DVD Blu-ray Disc™/DVD Cable/SAT (dish) Or Plus SD Cable Box or SD Satellite Receiver SAT (dish) HD Cable Box or HD Satellite Receiver SAT (dish) HD Cable Box or HD Satellite Receiver A/V Receiver Home Theater System Required Cable Types for Connection Coaxial DVI-to-HDMI ■ ■ Composite Digital Optical Audio HDMI Component Audio (L/R) ■ ■ Notes on Connection: Your TV is equipped with two HDMI inputs, connect your incoming signal source (HD Cable Box, HD Satellite Receiver, or DVD) with an HDMI or component video for the best possible picture quality. If your connecting equipment has DVI output instead of the HDMI output, you must use DVI-to-HDMI cable for the video and also connect an audio cable for the sound. If this is the case, connect the cable to HDMI IN 2 (input) of your TV. When receiving High Definition content signal by over-the-air antenna, it is best to use the HD antenna. When using a DVI-to-HDMI cable, make sure to connect the DVI side first. PC Connection Basic Connection with SD VCR/DVD Cable/Antenna Programming the Remote Control Your remote control can be programmed to use other equipment. The remote control is preset as below for Sony equipment. Cable/Antenna Sony Equipment BD DVD STB Splitter Splitter Rear of TV Rear of TV 2 Programmable Code Number 101 (Sony Blu-ray Disc Player) 751 (Sony DVD Player) 801 (Sony Satellite Receiver) Programming Non-Sony Video Equipment Follow the steps below to program your TV’s remote control. 1In the space provided below, write down the three-digit code of your equipment found on the Manufacturer’s Codes List on page 26 of the Operating Instruction Manual. 3 Notebook PC , or and simultaneously to light the FUNCTION button. 3Enter the three-digit code using - while the selected button is lit. If the code is not entered within 10 seconds, you must repeat step 2. Or HD Cable Box or HD Satellite Receiver DVD Code No. ______________ 2Press and hold SAT (dish) VCR DVD/VCR Combo If more than one code is listed, try entering the code listed first. PC 2 4 4Press while the FUNCTION button is lit. If programmed correctly the selected FUNCTION button blinks twice. If not it blinks five times. To Confirm the Programming If you can turn on and off the equipment by pressing the green is complete. If not, try the next code listed. button, then the programming Note: ■ In some cases, you may not be able to program your remote control. If this is the case, use your equipment’s own remote control. ■ Any one of the FUNCTION buttons can be programmed to operate other equipment regardless of the labeling. For example, if programmed with the correct code, can operate DVD/VCR combo equipment. This is useful if your equipment does not match the labeled buttons available. Make note of your equipment’s programmed button.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project