NAVIGON 92 Plus | 92 Premium | 92 Premium Live
NAVIGON 92 Plus
NAVIGON 92 Premium
NAVIGON 92 Premium Live
User’s manual
English (United Kingdom)
October 2011
The crossed-out wheeled bin means that within the European Union
the product must be taken to separate collection at the product end-oflife. This applies to your device but also to any enhancements marked
with this symbol. Do not dispose of these products as unsorted
municipal waste.
Imprint
NAVIGON AG
Schottmüllerstraße 20A
D-20251 Hamburg
The information contained herein may be changed at any time without prior
notification. Neither this manual nor any parts thereof may be reproduced for any
purpose whatsoever without the express written consent of NAVIGON AG, nor may
they be transmitted in any form either electronically or mechanically, including
photocopying and recording. All technical specifications, drawings etc are subject to
copyright law.
 2011, NAVIGON AG
All rights reserved.
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Table of contents
1
Introduction .......................................................................................7
1.1
1.2
1.3
2
About this manual ................................................................................ 7
1.1.1
Conventions.......................................................................... 7
1.1.2
Symbols................................................................................ 7
Legal notice ......................................................................................... 7
1.2.1
Liability ................................................................................. 7
1.2.2
Trade marks ......................................................................... 8
Questions about the product ................................................................ 8
Before you begin...............................................................................8
2.1
2.2
2.3
2.4
2.5
2.6
Scope of Delivery ................................................................................ 8
Description of the navigation device..................................................... 9
Important safety information ................................................................ 9
2.3.1
Navigation safety information .............................................. 10
2.3.2
Safety information for the navigation device ........................ 10
2.3.3
Safety information for installing the device in your car ......... 11
Preparing the navigation system for use ............................................ 11
2.4.1
SIM card ............................................................................. 11
2.4.2
Installing the navigation system in the vehicle ..................... 12
2.4.3
Memory card....................................................................... 14
Activating the NAVIGON Live services .............................................. 15
Navigating with GPS .......................................................................... 16
3
Switching on the navigation device ..............................................16
4
5
Using the Navigation System for the First Time ..........................17
Operating the navigation system ..................................................19
3.1
3.2
3.3
5.1
5.2
5.3
6
Switching on the device ..................................................................... 16
Switching the navigation device to standby mode .............................. 17
Switching off the navigation device .................................................... 17
Switching to a different application..................................................... 20
5.1.1
Scrolling.............................................................................. 20
5.1.2
Using the button bar ........................................................... 20
5.1.3
Options ............................................................................... 21
Information ........................................................................................ 21
Software keyboard ............................................................................. 24
5.3.1
Special keys ....................................................................... 25
5.3.2
Latin keyboard layout .......................................................... 25
5.3.3
Cyrillic and Greek keyboard layout...................................... 25
5.3.4
Entering data ...................................................................... 26
Voice Command ..............................................................................27
6.1
6.2
6.3
6.4
6.5
User’s manual
Activating the voice commands function ............................................ 27
Use Voice Command ......................................................................... 28
Help ................................................................................................... 28
Deactivation of the voice commands function .................................... 28
Configuring the voice commands function.......................................... 28
Table of contents w III
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
7
Navigation........................................................................................29
7.1
7.2
7.3
7.4
8
Starting the navigation application ..................................................... 30
Specifying a destination ..................................................................... 31
7.2.1
Specifying the country in which the destination is
situated ............................................................................... 32
7.2.2
Enter an Address ................................................................ 32
7.2.3
Announcing the address ..................................................... 34
7.2.4
Points of interest ................................................................. 35
7.2.5
Information about the destination ........................................ 38
7.2.6
Favourites ........................................................................... 39
7.2.7
Last Destinations ................................................................ 39
7.2.8
From the phone book .......................................................... 40
7.2.9
Navigating home ................................................................. 41
7.2.10 Selecting destinations on the map ...................................... 41
7.2.11 Options in the Destination window ...................................... 42
7.2.12 Route preview..................................................................... 42
Managing destinations ....................................................................... 45
7.3.1
Saving destinations............................................................. 45
7.3.2
Deleting a destination ......................................................... 46
7.3.3
Renaming a destination from the Favourites list .................. 46
7.3.4
Defining the home address ................................................. 47
7.3.5
Changing the home address ............................................... 47
Multi-leg routes .................................................................................. 48
7.4.1
Opening the route planning ................................................. 48
7.4.2
Planning a new route .......................................................... 48
7.4.3
Editing route points ............................................................. 49
7.4.4
Managing routes ................................................................. 50
7.4.5
Restoring the last route ....................................................... 52
7.4.6
Calculating and displaying routes........................................ 52
7.4.7
Simulating routes ................................................................ 53
7.4.8
Route preview..................................................................... 53
Working with the map .....................................................................55
8.1
8.2
8.3
8.4
8.5
Selecting the navigation map ............................................................. 55
Map in Standard mode ...................................................................... 56
Map in Route preview mode .............................................................. 57
Map in Navigation mode .................................................................... 59
8.4.1
Navigation in Vehicle mode................................................. 59
8.4.2
Navigation in Pedestrian mode ........................................... 64
8.4.3
Map options in Navigation mode ......................................... 66
8.4.4
Quitting navigation .............................................................. 67
Map in Destination search mode........................................................ 67
8.5.1
Changing the map section .................................................. 68
8.5.2
Set destination .................................................................... 68
8.5.3
Shifting the destination point ............................................... 69
8.5.4
Deleting a destination point ................................................. 69
IV  Table of contents
User’s manual
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
9
Useful functions ..............................................................................69
9.1
9.2
9.3
9.4
9.5
9.6
9.7
10
Route Profiles .................................................................................... 69
9.1.1
Route profile settings .......................................................... 69
9.1.2
NAVIGON basic profiles ..................................................... 70
9.1.3
Creating a new route profile ................................................ 71
9.1.4
Selecting a route profile ...................................................... 71
9.1.5
Managing route profiles ...................................................... 71
Screenshots ...................................................................................... 73
9.2.1
Enabling screenshots.......................................................... 73
9.2.2
Creating a screenshot ......................................................... 73
Parking near the destination .............................................................. 73
9.3.1
Special functions along a route with several stages ............ 75
MyBest POI: POI on Your Route........................................................ 76
9.4.1
Displaying POIs along the route.......................................... 76
9.4.2
Navigating to one of the destinations .................................. 77
9.4.3
Selecting categories ........................................................... 78
GPS Status, saving the current location ............................................. 78
Block ................................................................................................. 79
TMC (Traffic Information) ................................................................... 79
9.7.1
Route Optimisation: On Request......................................... 80
9.7.2
Route Optimisation: Automatic ............................................ 82
9.7.3
Displaying traffic information ............................................... 83
9.7.4
Filtering traffic messages .................................................... 84
9.7.5
Showing a single message in detail .................................... 85
9.7.6
Edit Mode ........................................................................... 86
9.7.7
Options (Traffic Information) ............................................... 86
9.7.8
Settings (Traffic Information) ............................................... 87
Handsfree Module ...........................................................................88
10.1
10.2
10.3
10.4
User’s manual
Bluetooth Connection ........................................................................ 90
10.1.1 Searching for and pairing Bluetooth devices ....................... 90
10.1.2 Pairing from the mobile phone ............................................ 92
10.1.3 Connecting to a device ....................................................... 93
10.1.4 Activating a mobile phone ................................................... 94
10.1.5 Deleting devices ................................................................. 95
10.1.6 Import Phone Book ............................................................. 96
10.1.7 Import recent calls .............................................................. 97
Taking a call ...................................................................................... 97
Receiving a text message .................................................................. 98
Making a call ..................................................................................... 98
10.4.1 Dialling a telephone number ............................................... 98
10.4.2 Dialling a Speed Call number.............................................. 99
10.4.3 Calling a contact from the phone book ................................ 99
10.4.4 Calling most recently dialled, received or missed
numbers ............................................................................. 99
10.4.5 Transferring a call from your mobile telephone ................. 100
Table of contents w V
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
10.5
10.6
10.7
11
During a call .................................................................................... 100
10.5.1 Go back to entering a destination...................................... 100
10.5.2 Moving the map to the foreground .................................... 100
10.5.3 Entering numbers ............................................................. 101
10.5.4 Muting the microphone ..................................................... 101
10.5.5 Transferring a call to the mobile phone ............................. 101
10.5.6 Ending the call .................................................................. 101
Useful functions ............................................................................... 101
10.6.1 Navigating to a contact from the phone book .................... 101
10.6.2 Opening the mailbox ......................................................... 102
Configuring the hands-free function ................................................. 103
10.7.1 Preset ............................................................................... 103
10.7.2 Settings ............................................................................ 104
NAVIGON Live ...............................................................................105
11.2
11.3
11.4
11.5
11.6
11.1.1 Costs ................................................................................ 106
Using the NAVIGON Live services ................................................... 107
11.2.1 Weather Service Live ........................................................ 107
11.2.2 Safety Cameras Live (Mobile Safety Camera Live) ........... 108
11.2.3 Parking Live (CleverParking Live) ..................................... 109
11.2.4 Fuel Live ........................................................................... 111
11.2.5 Local Search (Google Local Search)................................. 112
11.2.6 Events Live ....................................................................... 113
11.2.7 Traffic Information (Traffic Live) ........................................ 116
Configuring the NAVIGON Live services .......................................... 116
Indicating the status ......................................................................... 117
NAVIGON Live modem check.......................................................... 117
Information about all aspects of the navigation system .................... 117
12
13
Configuring the Navigation System ............................................118
Appendix .......................................................................................120
14
15
Troubleshooting............................................................................126
Index ..............................................................................................128
13.1
13.2
13.3
Technical data of the navigation device ........................................... 120
NAVIGON Licensing Policy.............................................................. 122
Declaration of conformity ................................................................. 126
VI  Table of contents
User’s manual
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
1
Introduction
1.1
About this manual
1.1.1
Conventions
For better legibility and clarification, the following styles are used in this
manual:
Bold and italics:
Names of products
SMALL CAPITALS:
Names of windows and dialogue boxes
Bold:
Highlighting of important parts in the text
Underlined:
Descriptions of buttons, input boxes and other
elements on the user interface
Underlined and italics:
Names of control elements on the navigation device
1.1.2
Symbols
The following symbols draw attention to specific passages of text:
Instructions and tips for operating the software
More detailed information and explanations
Warnings
1.2
Legal notice
1.2.1
Liability
The software and manual are subject to change without notice.
NAVIGON AG is not liable for the accuracy of the information contained
in this manual or for damages resulting from the use of this manual.
Suggestions for improvements and information regarding errors are
always welcome so that we can supply you with even better products in
the future.
Introduction
-7-
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
1.2.2
Trade marks
All brand and trade marks mentioned in this document and registered
by third parties are subject without reservation to copyright law and the
proprietary rights of their respective owners. All trade marks, trade
names and company names used in this document are or may be trade
marks or registered trademarks of their respective owners. All rights
reserved except those explicitly granted.
If the registered trade marks used in this manual are not explicitly
identified as such, this does not imply that the name is not subject to the
rights of a third party.
►
►
1.3
Microsoft, Outlook, Excel and Windows are registered trade marks
of the Microsoft Corporation.
NAVIGON is a registered trade mark of NAVIGON AG.
Questions about the product
You have a question concerning your product? Then visit our website
www.navigon.com and click on "Customer Services". There you will find
an area with frequently asked questions (FAQ Center) along with details
of how to contact us by phone or e-mail.
2
Before you begin
2.1
Scope of Delivery
Please check that the contents are complete. If anything is missing, get
in touch immediately with the dealer who sold you the product.
The purchased product includes the following:
►
Navigation device
►
Designer car cradle
►
Car charger cable (12V adapter for the vehicle's cigarette lighter)
with integrated TMC antenna
►
USB cable
►
Illustrated installation instructions
Only NAVIGON 92 Premium Live:
►
►
►
-8-
Quick guide NAVIGON Live Services
SIM card holder. The card holder is glued in the quick guide
and can be removed easily. The SIM card has been broken out
of its holder already.
SIM card (is already inserted in the navigation device)
Before you begin
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Note: Keep the SIM card holder in a safe place! You will need the data
printed on this holder if you ever have to contact the NAVIGON Service
Centre for assistance.
2.2
Description of the navigation device
1
On/Off
2
Touch-screen
3
Microphone
(only NAVIGON 92 Premium | 92 Premium Live)
4
Slot for SIM card (only NAVIGON 92 Premium Live)
5
Mini USB socket for USB cable / mains adapter
6
Slot for microSD memory card
7
Reset
8
LED
2.3
Important safety information
In your own interest, please read the following safety information and
warnings carefully before starting up your navigation system.
Before you begin
-9-
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
2.3.1
Navigation safety information
Use the navigation system at your own risk.
Caution! To prevent accidents, do not operate the navigation system
while driving.
Caution! Do not look at the screen unless it is absolutely safe to do so!
Caution! Traffic regulations have priority over any instructions from the
navigation system.
Caution! Follow the instructions of the navigation system only when the
circumstances and the road traffic regulations allow you to do so! The
navigation system will still guide you to your destination even if you
deviate from the calculated route.
Caution! Check that the cradle is secured and adjusted properly before
each journey.
2.3.2
Safety information for the navigation device
Caution! Protect the device from moisture. The device is neither
waterproof nor protected against splash water.
Caution! The surface of the display is made of glass. It can break if the
device is dropped.
Caution! Do not open the case of the navigation device under any
circumstances.
Caution! Do not expose the navigation device to extreme heat or cold.
This may damage the device or impair its function (see "Technical data
" on page 120).
Caution! Never unplug by pulling the cable. Doing so could severely
damage or destroy the device.
Caution! Do not subject the navigation device to severe temperature
fluctuations. This can lead to condensation.
Note: Do not kink the cable. Make sure that the cable cannot be
damaged by sharp-edged objects.
- 10 -
Before you begin
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Note: Create a backup of the data which exist in the internal memory of
your navigation device.
This is very easy to do with the NAVIGON Fresh software which can be
downloaded free of charge from our website www.navigon.com/fresh.
2.3.3
Safety information for installing the device in your car
Caution! Fasten the cradle so that the navigation device is easy to see
and operate by the driver. Make sure that the driver's view of the traffic
is not impeded.
Caution! Do not attach the cradle within the working zone of any
airbags.
Caution! Do not fasten the cradle too close to the steering wheel or
other controls. The driver must not be obstructed in operating any car
functions.
Caution! When installing the cradle, make sure that it will not pose a
risk in the event of an accident.
Caution! Do not run cables within the operating radius of airbags or in
the direct vicinity of other safety-relevant devices and power supply
lines.
Caution! Check that the cradle is secured and adjusted properly before
each journey. The suction cup may become loose after a while.
Caution! After installation, check all safety-relevant equipment in the
car.
Caution! Connect the car charger cable only to cigarette lighters with
an operating voltage of 12V.
Caution! Disconnect the car charger cable from the cigarette lighter
whenever you park the car. The integrated mains adapter always
consumes a small amount of energy and could drain the car battery.
2.4
Preparing the navigation system for use
2.4.1
SIM card
This chapter is relevant for you only if your navigation device is a
NAVIGON 92 Premium Live.
Before you begin
- 11 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Inserting the SIM card
The SIM card is already inserted The SIM card slot is on the left side of
the navigation device (see illustration, point 4 in chapter "Only
NAVIGON 92 Premium Live:
►
►
►
Quick guide NAVIGON Live Services
SIM card holder. The card holder is glued in the quick guide
and can be removed easily. The SIM card has been broken out
of its holder already.
SIM card (is already inserted in the navigation device)
Note: Keep the SIM card holder in a safe place! You will need the data
printed on this holder if you ever have to contact the NAVIGON Service
Centre for assistance.
Description of the navigation device" on page 8).
Removing the SIM card
1. .Switch off the navigation device. Do this by briefly pressing the
(On/Off) key and then tapping on the Switch off button.
2. Press the memory card gently into the device until the lock
disengages.
Note: If the SIM card is not correctly inserted, it may be impossible to
establish a connection to the NAVIGON server. In this case the
NAVIGON Live services will not be available.
Note: If no connection can be established to the NAVIGON Live server,
you can perform a modem test (see "NAVIGON Live modem check" on
page 117).
Note: Do not remove the SIM card except for an important reason.
Removing and reinserting the card frequently may impair the card's
function.
2.4.2
Installing the navigation system in the vehicle
Caution! Be sure to refer to all the safety information in chapter
"Important safety information" on page 9.
- 12 -
Before you begin
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Securing the cradle
1. Clean the suction cup and that part of the windscreen to which you
want to secure the cradle. Both must be dry and free of dirt and
grease.
2. Open the lever on the suction cup as far as possible.
3. Place the cradle suction cup against the windscreen.
4. Press the lever towards the windscreen.
Inserting the navigation device into the cradle
On the back of the navigation device you will see a circle with two
recesses.
1. Hang the navigation device by the upper recess on the upper lug of
the cradle (see the figure).
2. Then press it towards the cradle so that it latches in place.
Supplying power to the navigation device
Included in delivery of the navigation device is a car charger cable with
which power can be supplied to the navigation device via the vehicle's
cigarette lighter.
Before you begin
- 13 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Note: Use only the charger cable supplied with your navigation device
or an equivalent model from NAVIGON!
If you use a different charger cable, the NAVIGON Live services might
not be available.
►
Connect the car charger cable to the vehicle's cigarette lighter and
to the mini USB socket of the navigation device.
The LED on the bottom of the navigation device lights up orange during
charging.
As soon as the battery is fully charged, the LED lights up green.
Caution! Connect the car charger cable only to cigarette lighters with
an operating voltage of 12V.
Caution! Be sure to refer to all the safety information in chapter
"Important safety information" on page 9.
Note: Insert the USB connector securely in the corresponding USB
sockets!
Note: It takes approx. 3 hours to charge the device when the battery is
flat.
A fully charged battery enables up to 2 hours of use depending on the
device configuration.
TMC antenna
The navigation device has an integrated TMC receiver. The TMC
antenna is integrated in the car charger cable. Once the car charger
cable is connected, the device can receive current traffic messages. If
required, it can change your route dynamically, e.g. in order to avoid a
traffic jam.
2.4.3
Memory card
A memory card is not required to operate the navigation system
because all the data required for navigation are stored in the internal
memory of the device.
When you connect the navigation system to your computer using a USB
cable, the internal memory is detected as the 'NAVIGON' drive. The slot
for the memory card is detected as the 'NAVIGON SD' drive.
Data back-ups, software updates and navigation map updates can be
carried out quickly and conveniently with the NAVIGON Fresh software,
which you can download free of charge from the website
www.navigon.com/fresh.
- 14 -
Before you begin
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
If you purchase additional navigation maps but no longer have enough
space for them in the internal memory of your navigation device, it is
also possible for you to save these maps on a memory card microSD
which you then insert in the device. The navigation system can use
navigation maps from both memories.
2.5
Activating the NAVIGON Live services
This chapter is relevant for you only if your navigation device is a
NAVIGON 92 Premium Live.
The NAVIGON Live services must be activated before they are used
for the first time. (See "Costs" on page 106)
The SIM card is already inserted.
The NAVIGON Live Services quick guide with the activation code
which came with device is to hand.
1. Switch on the navigation device.
The NAVIGATION window opens.
2. Tap on
(NAVIGON Live).
You will be asked whether you want to activate the NAVIGON Live
services.
3. Tap on OK.
4. The ACTIVATION CODE window opens.
5. Enter the activation code.
6. Tap on OK.
The NAVIGON Live services are now activated.
7. Tap on OK.
The following message appears: "You are sending 'Floating Car
Data' to NAVIGON in anonymised form. The evaluation of these
data will help us, our affiliates, and our partners in calculating times
of arrival more precisely, in recognizing traffic congestion sooner,
and in planning alternative routes more reliably. No information
about your person can be derived from the data. If you do not
agree, select 'No' for the setting 'Optimise Traffic Recognition'."
8. Tap on Next.
The NAVIGATION window is opened. From here you have access to all
the functions of your navigation device and all available NAVIGON Live
services.
Note: Even after activation, location-related NAVIGON Live services
(e.g. Fuel Live or Events Live) will be available only when the
navigation device has GPS reception and can determine its position.
Before you begin
- 15 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
2.6
Navigating with GPS
GPS is based on a total of at least 24 satellites orbiting the Earth and
continuously transmitting signals of their position and time. The GPS
receiver receives this data and calculates its own geographical position
on the basis of the information transmitted by the various satellites.
Data from at least three satellites is required for positioning with an
acceptable degree of accuracy. With data from four or more satellites it
is possible in addition to determine the position's altitude above sea
level. Positioning is accurate to within three metres.
Once the navigation device has determined your position, this position
can be used as a starting point for calculating a route.
The map data on your navigation device includes the geographical
coordinates of all digitally recorded points of interest, streets and
places. This enables the device to calculate a route between a starting
point and a destination.
Calculation of the current position and its representation on the map
take place approximately once every second. In other words, your
current position is always shown on the map.
3
Switching on the navigation device
The navigation device can be in one of three states:
►
On: The navigation device is on and can be operated.
►
►
3.1
Off: When you switch off the device, it consumes hardly any
energy. It can then take several months for the battery to become
flat. Switching the device on again triggers a restart which can take
some time (approx. 60 seconds). Your settings and your saved
destinations and routes will be retained.
Switching on the device
►
- 16 -
Standby: When you switch the navigation device to standby mode,
the next time it is switched on it will start very quickly and with the
window which was active when switched off. In standby mode the
device still consumes a small amount of energy however.
Depending on how full the battery is, it can become flat within a few
days or a few weeks.
Press the
(On/Off) key and keep it pressed until the device
switches on.
The NAVIGATION window opens.
Switching on the navigation device
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
3.2
Switching the navigation device to standby
mode
►
Press briefly on the
(On/Off) key (max. 1 second).
A message will appear telling you that the device will be switched to
standby mode in several seconds.
►
Wait for the device to be switched to standby mode or tap on
Standby.
Automatic Standby
You can configure the navigation device so that it is automatically
switched to standby mode when not in use.
►
►
►
3.3
In the NAVIGATION window tap on
(More) > System
Settings > Power and Screen > Automatic Standby.
Select after how much time you want the navigation device to be
switched to standby mode (Never, After 10 mins., After 20 mins.,
After 30 mins.).
Select Power Loss in order to switch the device to standby mode
when the external power supply is interrupted. As soon as the
device is connected again to the external power supply it will switch
on again automatically.
Switching off the navigation device
►
Press the
(On/Off) key and keep it pressed until the device
switches off (approx. 10 seconds).
- or -
1. Press briefly on the
(On/Off) key (max. 1 second).
A message will appear telling you that the device will be switched to
standby mode in several seconds.
2. Tap on Switch off.
4
Using the Navigation System for the First
Time
When you switch on the navigation system for the first time, you will be
asked to make a number of basic settings:
The LANGUAGE window opens.
1. Select your preferred language for using the software.
2. Tap on OK.
The DISTANCE UNIT window opens.
Using the Navigation System for the First Time
- 17 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
3. Determine how you want distances to be shown ('Kilometres' or
'Miles').
4. Tap on OK.
The TIME FORMAT window opens.
5. Determine the time format ('12h (am/pm)' or '24h').
6. Tap on OK.
The DATE FORMAT window opens.
7. Select the date format. This means:
►
YYYY: the year in 4 digits
►
MM: the month in 2 digits
►
DD: the day in 2 digits
8. Tap on OK.
If you purchased your navigation system together with the add-on
NAVIGON Safety Camera, the WARN OF SAFETY CAMERAS window
will open.
9. Read the text in this window very carefully. It describes the settings
which you can make for the add-on.
10. Tap on OK.
The WARN OF SAFETY CAMERAS window opens.
11. Select the setting you want.
12. Tap on OK.
►
►
If you have selected the Uninstall option, you will be asked to
confirm the deinstallation of the add-on.
Tap on Yes.
Note: If you deinstall NAVIGON Safety Camera, the add-on can be
installed again only by using the NAVIGON Fresh software.
The PRESENTATION MODE window opens.
Presentation mode is intended solely for presenting the product
when no GPS reception is possible.
When presentation mode is active, navigation is not possible.
Presentation mode is designed solely to simulate navigation to the
centre of the indicated destination.
13. Make sure that the Start in Presentation Mode checkbox is not
activated. If necessary, tap on the checkbox in order to set the
value Yes (
activated).
checkbox activated) to No (
checkbox not
14. Tap on OK.
- 18 -
Using the Navigation System for the First Time
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Note: How to deactivate presentation mode is explained in
"Troubleshooting" in section "I have accidentally activated presentation
mode" on page 127).
There then follows a series of pictures which demonstrate the basic
operations of the navigation device.
You can use the
(Next) button and the
button to switch between the other pictures.
(Back)
15. Look at all the pictures.
- or Tap on Done.
Note: In the NAVIGATION windw tap on
(More) > Show
Introduction if you want to see the introduction again later.
A window with the following message opens:
"Please note that the road traffic regulations are prior to the
instructions of the navigation system. Please do not operate the
device while driving."
16. After you have read and fully understood the message, tap on OK.
If you do not accept the content of the message, tap on Cancel in
order to exit the navigation application.
A window with several buttons opens.
17. Tap on any point of the screen.
The NAVIGATION window opens.
5
Operating the navigation system
Note: You received a brief introduction to the navigation system's
operation when you first started it. In the NAVIGATION window tap on
again.
(More) > Show Introduction if you want to see the introduction
Essentially, the navigation software comprises several applications
whose number varies according to the range of functions offered by
your navigation device. From these applications you have access to all
the functions and settings possible with the navigation system.
At the bottom edge of the screen is a bar with several buttons.
Operating the navigation system
- 19 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Each button represents an application. A coloured bar over a button
indicates that the related application is currently open (here:
NAVIGATION)
(Handsfree Module): Opens the HANDSFREE MODULE window, see
"Handsfree Module" on page 88.
(only NAVIGON 92 Premium | 92 Premium Live)
(Navigation): Opens the NAVIGATION window; there you have
access to all the methods for entering and selecting a destination
(Show Map): Opens the map in Standard mode when no
navigation is in progress (see "Map in Standard mode" on page 56), or
opens it in Navigation mode when navigation is in progress (see "Map
in Navigation mode" on page 59).
(Navigation Options): Opens the NAVIGATION OPTIONS window. It
contains useful functions for navigation and for adjusting the map.
(NAVIGON Live): Opens the NAVIGON LIVE window. There you
have access to all NAVIGON Live services, see "NAVIGON Live" on
page 105 (only NAVIGON 92 Premium Live).
5.1
Switching to a different application
Switching between applications is possible in various ways.
5.1.1
Scrolling
Drag your finger horizontally over the screen in order to scroll between
the applications.
►
►
5.1.2
Drag you finger from left to right over the screen in order to open
the application which lies to the left of the current application.
Drag you finger from right to left over the screen in order to open
the application which lies to the right of the current application.
Using the button bar
You can use the button bar to switch quickly between different
applications.
►
Tap on a button to open the corresponding application.
The button bar is hidden on the map in Standard and Vehicle modes.
- 20 -
►
Tap on the map to show the button bar.
►
Tap on a button to open the corresponding application.
Operating the navigation system
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
5.1.3
Options
At the top right edge of many windows is the
which you can use to move to more functions.
(More) button
Touch the
(Cancel) button to close the window again without
executing a function.
More options can be reached via the
(Navigation Options)
button on the button bar. Here you will find useful functions for
navigation and for adjusting the map.
5.2
Information
Various information symbols are located at the top of many windows.
GPS
The GPS symbol can show the following GPS reception status:
No GPS (No symbol): The built-in GPS receiver is not operational.
Contact us if the problem persists (see "Questions about the product"
on page 8).
No Signal: Data is being received from less than three satellites.
Position cannot be calculated.
GPS Ready: Data is being received from at least 3 satellites. Position
can be calculated.
Simulation: If a simulation is in progress, the Demo symbol will appear
instead of the GPS symbol.
For details of the GPS status refer to chapter "GPS Status, saving the
current location" on page 78.
Compass
The Compass symbol indicates in which direction you are currently
heading. It can indicate the following points of the compass:
N, NE, E, SE, S, SW, W, NW
Operating the navigation system
- 21 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Energy
The Energy symbol can indicate the following states of the integrated
battery:
The device is being supplied by an external power source. The battery
is fully charged.
The battery cannot be charged because its temperature is too high.
The device is being supplied by an external power source. The battery
is being charged.
The device is being supplied by its internal battery. The battery is fully
charged.
The device is being supplied by its internal battery. The battery charge
is sufficient.
The device is being supplied by its internal battery. The battery charge
is low.
Traffic Information
TMC
The navigation system has an integrated TMC receiver which supplies
up-to-date traffic information. Using this information the navigation
system can change your route dynamically, for example in order to
avoid a traffic jam.
Note: This function is only available if TMC traffic messages are being
transmitted in the country in which you are travelling. This is not the
case in all countries.
The TMC symbol can display the following TMC reception status:
Tuning (in red): The TMC receiver is operational but cannot find a
transmitter that is sending TCM signals. There are no active traffic
messages.
Tuning: The TMC receiver is operational but cannot find a station that
is transmitting TMC signals. Traffic messages are active however. This
can be the case, for example, when travelling through a tunnel.
TMC on Standby (in white): Traffic messages can be received.
Note: The TMC antenna is integrated in the car charger cable. The
Tuning symbol may still appear therefore when the car charger cable is
not connected to the navigation device.
For details of the TMC function refer to chapter "TMC (Traffic
Information)" on page 79.
- 22 -
Operating the navigation system
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Traffic Live
This section is relevant for you only if your navigation device is a
NAVIGON 92 Premium Live.
You can draw traffic information either from the NAVIGON Live
services (Traffic Live) or from radio stations (TMC). (Refer to
"Configuring the NAVIGON Live services" on page 116.)
The Traffic Live symbol appears when you are drawing traffic
information from the NAVIGON Live service.
The Traffic Live symbol can indicate the following traffic information
reception states:
(Red) Connecting: The last attempt to call up traffic information from
the NAVIGON Live server failed. This can be the case, for example,
when travelling through a tunnel. Information which was called up
previously may still be active however.
(White) Traffic Live Ready: Traffic information was called up
successfully. The active information is up to date.
Muting
The Muting symbol can indicate the following states:
No symbol: The navigation application is not muted.
Muting: The navigation application is muted. If the device is navigating
at the moment, you will not hear any driving instructions.
Note: This symbol indicates only the muted state of the navigation
instructions. It says nothing about the volume of the hands-free module.
Bluetooth / Phone
This section is relevant for you only if your navigation device is a
NAVIGON 92 Premium | 92 Premium Live.
The navigation device has an integrated Bluetooth hands-free module.
This enables you to use the device as a hands-free kit for up to two
mobile phones with Bluetooth capability.
The Phone symbol can display the following states of the hands-free
module:
No Bluetooth (No symbol): The Bluetooth function is deactivated.
Not connected (red mobile phone): The navigation device has no
Bluetooth connection to another device.
Operating the navigation system
- 23 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Connected (white mobile phone): The navigation device is connected
to a mobile phone and can be used as a hands-free car kit. The number
indicates which of the two phones is currently active.
Call in Progress (green mobile phone): The hands-free module of the
navigation device is being used for a phone call. The number indicates
which of the two phones is being used to make the call.
Headset: A headset is connected. All the instructions given by the
navigation system are heard over the headset. The telephone functions
of the hands-free module are not available.
NAVIGON Live Services
This section is relevant for you only if your navigation device is a
NAVIGON 92 Premium Live.
The NAVIGON Live Services symbol indicates the availability of the
NAVIGON Live services. The following states can be symbolised:
The NAVIGON Live Services symbol indicates the availability of the
NAVIGON Live services. The following states can be symbolised:
(No symbol) No NAVIGON Live Services: The NAVIGON Live
services are deactivated. (Refer to "Configuring the NAVIGON Live
services" on page 116)
(Red) Connecting: There is no connection yet to the NAVIGON Live
server. This can be due to the following:
►
The mobile radio connection is interrupted.
►
The NAVIGON Live server is not answering.
(White) NAVIGON Live Services Ready: There is a connection to the
NAVIGON Live server. The NAVIGON Live services are available.
5.3
Software keyboard
A software keyboard appears on the screen when text entries are
necessary.
When you want to enter addresses, names or POIs, the keyboard with
the alphabet for the country in question will open automatically.
When you want to save a destination to Favourites or when you enter a
POI category or a country, the keyboard with the alphabet of the user
interface will open automatically.
All entries can be made on the software keyboard using your fingertips.
Only capital letters can be entered.
- 24 -
Operating the navigation system
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
When entering town or street names you need not enter any special
characters or umlauts. The navigation system fills in these characters
for you automatically. For example, if you are looking for the town of
"Bärnau", then simply type in the word "BARNAU". Special characters
may be helpful however when naming saved destinations and routes.
5.3.1
Special keys
inserts a space.
deletes the character in front of the cursor.
5.3.2
Latin keyboard layout
With the two buttons at the bottom right and bottom left edge of the
screen you can switch between the keyboard for letters, the keyboard
for special characters and the keyboard for numbers.
Left key:
/
: Switches between the keyboard for numbers and the
keyboard for letters.
Right key:
/
: Switches between the keyboard for special characters
and the keyboard for numbers.
Note: The layout for the keyboard with the Latin alphabet can be
configured.
►
►
5.3.3
In the NAVIGATION window tap on
(More) > System
Settings > Language and Keyboard > Keypad layout (Latin).
Select the layout you want to use: Alphabetical (ABCDEF), English
(QWERTY), German (QWERTZ), French (AZERTY).
Cyrillic and Greek keyboard layout
You can also switch from the Cyrillic or Greek keyboard to the Latin
keyboard. Many addresses can then also be entered as transliterations
or in the language of the user interface.
Operating the navigation system
- 25 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Example: The language of the user interface is English. You want to
navigate to Moscow. You have the following options:
►
"Москва" (Cyrillic)
►
"Moskva" (transliterated)
►
"Moscow" (English).
Note: Street names and place names can be entered only in the
language of the user interface if that is how they exist in the map's
database.
With the button at the bottom left edge of the screen you can switch
between the Latin and Cyrillic or the Latin and Greek keyboard, with the
button at the bottom right edge of the screen you can switch between
the keyboard for letters, the keyboard for special characters and the
keyboard for numbers.
Cyrillic keyboard layout
Left key:
/
: Switches between the Latin and Cyrillic keyboard layout.
Right key:
Switches between the keyboard for special characters, the keyboard for
numbers and the keyboard for letters of the current keyboard layout.
Greek keyboard layout
Left key:
/
: Switches between the Latin and Greek keyboard layout.
Right key:
Switches between the keyboard for special characters, the keyboard for
numbers and the keyboard for letters of the current keyboard layout.
5.3.4
Entering data
Often you can select an entry from a list. This is the case, for example,
when you enter a location.
As soon as you enter the first letter, the largest city in the given country
that begins with this letter appears.
Enter more letters and after each entry the first city which begins with
these letters will appear.
►
- 26 -
When the correct location appears, tap on
complete the entry.
(OK) in order to
Operating the navigation system
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
You can open at any time a list containing all the locations which begin
with the letters or include the text already entered. The more letters you
enter, the shorter the list becomes.
►
Tap on
(Open List) in order to call up this list.
You can use the
(Up) and
through the list page by page.
►
(Down) buttons to scroll
Tap on an entry in the list to select it and transfer it to the input box.
The list closes once an entry has been selected. You are now
finished with entering the city.
►
Tap on
an entry.
(Close List) in order to close the list without selecting
Note: The list opens automatically as soon as it contains only 4 or less
entries.
6
Voice Command
This section is relevant for you only if your navigation device is a
NAVIGON 92 Premium | 92 Premium Live.
Note: The Voice Command function is not available in every language.
For languages in which this function is not available, the Voice
Command button is not shown in the NAVIGATION window.
Many functions of your navigation device can be called up conveniently
by voice command.
6.1
Activating the voice commands function
The voice commands function is automatically active in many windows.
This applies in particular to windows in which you are expected to
provide an answer, for example when there is a new traffic message
concerning your route.
On the map in Standard or Navigation mode, the Voice Command
function will be activated as soon as the button bar is shown.
►
Tap on any point on the map.
You will hear a single acknowledgement tone and you can utter
your command.
Voice Command
- 27 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
6.2
Use Voice Command
When the functions in a window can be called up by voice command,
this is indicated in the bottom left corner of the window by the symbol
(Voice command active).
A single signal tone and the symbol
(Speak) indicate that the
navigation system is waiting for your voice command.
►
Say a command.
The positive acknowledgement tone sounds (two high-pitch tones)
and the function is executed.
If the navigation system has not understood your instruction or if you do
not say anything within a certain time, the negative acknowledgement
tone (two short low-pitch tones) will sound.
►
Say the command again.
If the navigation system has not understood you after several
repetitions, the prompt "Say Help" will appear.
Note: Navigation instructions and warnings are muted for as long as the
navigation device expects to receive voice commands from you.
6.3
Help
Say only "Help" if you want to know which voice commands are
currently possible. In nearly all windows in which voice commands are
supported the navigation system will then tell you which commands you
can say in the current window.
6.4
Deactivation of the voice commands function
The voice commands function will be deactivated under the following
conditions:
►
►
6.5
If you operate the navigation device with your finger while a voice
command is expected from you.
If a call is received and during an active phone call if the navigation
device is being used as a hands-free module.
Configuring the voice commands function
You can configure for which tasks you want to use the voice
commands.
►
- 28 -
In the NAVIGATION window tap on
Settings > Voice Command.
(More) > System
Voice Command
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Select the tasks for which you want to use Voice Command:
►
►
►
Entering Addresses: You can enter only addresses with the
voice command function.
Answering: You can enter addresses and answer questions
asked by the navigation device.
Complete: You can use all the voice command functions.
Note: For details of how to enter a destination using voice commands
refer to the chapter "Announcing the address" on page 34.
The volume of the voice commands assistant can be controlled
independently of the volume of the navigation instructions. This means
you can still hear the input requests when you have muted the
navigation instructions.
1. In the NAVIGATION window tap on
(More) > System
Settings > Voice Command > Volume of the Assistant.
2. Select the volume for the assistant.
Note: For details of how to configure the navigation system refer to the
chapter "Configuring the Navigation System" on page 118.
7
Navigation
Use the navigation system at your own risk.
Caution! Be sure to refer to all the safety information in chapter
"Important safety information" on page 9.
Impaired GPS reception
If GPS reception is impaired (e.g. because you are in a tunnel),
navigation will be continued. The navigation system will then calculate
your likely position from the route data and your previous driving profile.
As soon as GPS signals are received again, navigation will be
continued with real GPS data.
Arriving at your destination
When you have reached your selected destination, a message to this
effect will be displayed.
Only your current position (orange arrow) and the destination flag will
now be shown on the map.
Navigation
- 29 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
7.1
Starting the navigation application
You have switched on the navigation device.
The following message appears:
"Please note that the road traffic regulations are prior to the instructions
of the navigation system. Please do not operate the device while
driving."
►
After you have read and fully understood the message, tap on OK.
If you do not accept the content of the message, tap on Cancel in
order to exit the navigation application.
The NAVIGATION window is opened. From here you can access all the
functions of the navigation application.
Initialising the GPS receiver
Note: Good reception of GPS data requires an unobstructed path from
the GPS receiver to the satellites. Tunnels, narrow thoroughfares
between buildings and reflecting house fronts can restrict GPS
reception greatly or make it impossible. If the GPS receiver or the
navigation device is inside a vehicle, a metallised windscreen or a
windscreen heater can be the cause of poor GPS reception.
As soon as the navigation device has been switched on, initialisation of
the GPS receiver will begin.
The integrated GPS receiver is not initialised for the first time until the
navigation application is started for the first time. It can take up to
5 minutes to initialise the GPS receiver for the first time.
Each time you switch on the navigation device after this, GPS reception
will start within a short time.
If the navigation device has not been switched on for more than a week,
it can take up to 10 minutes to re-initialise the receiver.
Note: Directly after the GPS symbol indicates the GPS Ready state,
the accuracy of the positioning may be reduced for a few minutes.
In the top right hand corner of the screen you will see the GPS symbol.
As soon as data from at least three satellites is received, the symbol will
change to
(GPS Ready).
Note: Initialisation takes the least time if you do not start driving until
the initialisation has finished.
For more details about the GPS symbol refer to chapter "GPS" on
page 21.
- 30 -
Navigation
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Returning to the Navigation window
The NAVIGATION window opens when the navigation application is
started.
If a window with a visible button bar is opened:
►
In the bar tap on
(Navigation).
If the map is open in Standard mode or in Vehicle mode:
►
Call up the button bar (see "Button bar" on page 62).
►
In the bar tap on
(Navigation).
If a different window of the navigation application is open:
►
►
7.2
Tap on
came from.
(Back). This will return you to the window you
Tap on
opened.
(Back) repeatedly until the NAVIGATION window is
Specifying a destination
You can either enter a new destination or select a saved destination.
To enter a new destination you can
►
►
enter the address of the destination (see "Enter an Address" on
page 32).
select a point of interest (see "Points of interest" on page 35).
Note: If you are entering a new destination for the first time, the
COUNTRY window opens. Tap on the country in which your destination
lies.
To select a saved destination you can select from the following lists of
destinations and addresses:
►
FAVOURITES: All destinations that you have entered and then saved
(see "Favourites" on page 39).
Two special destinations are also saved in the FAVOURITES list:
►
►
►
Navigation
My Address: The address which was saved as the home
address (see "Defining the home address" on page 47).
My Vehicle: The location of your vehicle is automatically saved
when you use the Parking Close to Destination function (see
"Parking near the destination" on page 73).
LAST DESTINATIONS: Destinations to which you have navigated on a
previous occasion (see "Last Destinations" on page 39).
- 31 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
►
7.2.1
FROM THE PHONE BOOK: All the destinations from the telephone
book of a connected mobile phone (see "From the phone book" on
page 40).
Specifying the country in which the destination is situated
If you enter an address (see “Enter an Address“ on page 32), a POI in a
town (see POI in a particular location on page 36) or a nationwide POI
(see “POI of nationwide significance“ on page 37), the Country button
will appear in the first input window at top left. It bears the flag of the
country in which you can currently select destinations for the navigation
application.
If your destination is in a different country, then proceed as follows:
1. Tap on the Country button.
2. Enter the name of the country in which your destination is situated.
The button shows the flag of the destination country.
Note: The selection list contains only those countries whose maps are
available to the navigation device.
7.2.2
Enter an Address
1. In the NAVIGATION window, tap on Enter Destination > Enter an
Address.
If the navigation device contains the map of a country in which
the street is usually listed first (e.g. Sweden, Norway, ...), the
INPUT MODE FOR ADDRESS DATA window will open.
►
Select the order of entry you want (Street First or City First). If
you would like to save this setting permanently and without
being asked again, first activate the checkbox alongside 'Use
these settings in future for address information'.
Note: You can define and change the order in the NAVIGATION window
under
(More) > Navigation Settings > General > Input Mode for
Address Data.
Please note however that the Street First order of entry is not possible
for all countries. If the map of the selected country does not support
both modes, you must enter the town first.
Note: The following description is based on City First as the order for
entering the address.
The CITY window opens.
1. Enter the name or the postal code of the destination town.
2. Enter the name of the destination street.
- 32 -
Navigation
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
If you enter an address in the Czech Republic or in Russia and
have selected the corresponding map, you can also enter the
land register number instead of the street name.
►
In the STREET window tap on
(More) > Enter Address
Point and enter the land register number.
The navigation system will then calculate a route to this
address.
3. Enter the house number. If you do not know the house number,
then leave this box empty.
If you don't know the house number but know the name of a nearby
side street, then tap in the NO. window on
(More) > Enter
Cross Street and enter this name. The navigation system will
calculate a route to the intersection of the streets you have entered.
The DESTINATION window opens.
4. Tap on Start in order to navigate to the stipulated address.
- or Tap on
(Parking) in order to search for and navigate to a car
park near your destination.
Sometimes the destination cannot be found exactly because, for
example, the entered combination of place and street name exists
several times.
In this case a window will open with a list of all the addresses
matching your entry plus additional information.
►
Tap on the address to which you want to navigate.
If the entered house number is not included on the map, the window
will show an address with the house number closest to the one
entered.
The system calculates the route. When the route calculation is
finished, the map opens in Route preview mode. The destination is
indicated on the map.
A description of all the options available in the DESTINATION window can
be found in the chapter "Options in the Destination window" on page 42.
For detailed information on how to start navigation, please refer to
chapter "Route preview" on page 42. Please read on there.
Navigation
- 33 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Note: You don't have to enter all the address details. You can also start
the navigation before then by tapping on the
(Take Me There)
button which is indicated underneath the entry box alongside the
already entered town or street.
If you specify the town only, the navigation system will calculate a route
to the town centre.
If you specify only the town and street without specifying a house
number or cross street, the navigation system will calculate the best
route to this street.
7.2.3
Announcing the address
It is particularly convenient to select the destination address by voice
command.
1. In the NAVIGATION window tap on Voice Command.
When you call up the Voice Command function for the first time, a
window will open with general information and tips on how to use
the voice commands function.
►
►
Tap on “Show this message again next time.“ so that this
window will not reappear when you use the voice commands
function again.
Tap on Next.
The CITY window opens.
Indicated at the top is the country for which you can select
addresses.
►
Tap on the country if your destination address is situated in a
different country. Then follow the instructions given by the
navigation system.
You will be asked for the address data in this order: City > Street >
House number.
A single signal tone and the symbol
(Speak) indicate that the
navigation system is waiting for your voice command.
2. Follow the instructions given by the navigation system.
When you have finished entering the address, the map will open in
Route preview mode. The destination is indicated on the map.
Note: The Voice Command function is not available for every
language. In the languages for which this function is not available, the
Voice Command button does not appear.
- 34 -
Navigation
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
7.2.4
Points of interest
Points of Interest, called POI for short, are useful addresses that are
catalogued according to particular criteria.
POIs include ports, airports, restaurants, hotels, petrol stations, public
buildings, doctor's surgeries, hospitals, shopping centres, etc.
Points of interest can be displayed on the map by means of a symbol.
In the NAVIGATION window tap on
>(More) > Navigation
Settings > Map Display > Categories Shown in order to select the
categories you want to appear on the map.
POI nearby
POIs nearby are POIs located within a certain radius of your current
location. This means you can always find the nearest petrol station for
example, no matter where you are.
Note: GPS reception must be good enough for determining your
position. Check the
(GPS Ready) symbol to see whether GPS
reception is good enough.
If GPS reception is not good enough, the system will look for POIs near
the last known position. If there is no last known position, the POI
Nearby function will not be available.
For more details refer to the chapter "Initialising the GPS receiver" on
page 30.
1. In the NAVIGATION window tap on Enter Destination > Search for
POI > Nearby.
The CATEGORY window opens.
2. Select a category from which you would like to find a POI.
Categories in which no destinations are available nearby cannot be
selected.
If sub-categories exist for the category you have selected, the Sub
Category list opens.
3. Select the sub-category from which you would like to select a POI.
The DESTINATION list opens. It contains the nearest POIs in the
specified category, sorted by distance.
4. If the list is very long:
►
Tap on
(Close List).
The keyboard appears.
Navigation
►
Enter a number of letters from the destination.
►
Tap on
(Open List).
- 35 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
The list now contains only those destinations which begin with the
letters entered.
5. Tap on the name of the destination.
The DESTINATION window opens.
6. Tap on Start in order to navigate to the stipulated address.
- or Tap on
(Parking) in order to search for and navigate to a car
park near your destination.
The system calculates the route. When the route calculation is
finished, the map opens in Route preview mode. The destination is
indicated on the map.
A description of all the options available in the DESTINATION window can
be found in the chapter "Options in the Destination window" on page 42.
For detailed information on how to start navigation, please refer to
chapter "Route preview" on page 42. Please read on there.
POI in a particular location
POIs in a particular location can be useful when navigating in an
unfamiliar town.
1. In the NAVIGATION window tap on Enter Destination > Search for
POI > in a City.
The CITY window opens.
2. Enter the name or the postal code of the destination town.
3. Select a category from which you would like to find a POI.
Categories in which no destinations are available in the selected
town cannot be entered.
If sub-categories exist for the category you have selected, the Sub
Category list opens.
4. Select the sub-category from which you would like to select a POI.
The DESTINATION list opens. It contains POI from the specified
category, sorted alphabetically.
5. If the list is very long:
►
Tap on
(Close List).
The keyboard appears.
- 36 -
►
Enter a number of letters from the destination.
►
Tap on
(Open List).
Navigation
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
The list now contains only those destinations which begin with or
contain the letters entered.
6. Tap on the name of the destination.
The DESTINATION window opens.
Sometimes the destination cannot be found exactly because, for
example, several restaurants with the same name exist in the town
in question.
In this case a window opens with all the destinations matching your
entry plus additional information.
►
Tap on the destination to which you want to navigate.
The DESTINATION window opens.
7. Tap on Start in order to navigate to the stipulated address.
- or Tap on
(Parking) in order to search for and navigate to a car
park near your destination.
The system calculates the route. When the route calculation is
finished, the map opens in Route preview mode. The destination is
indicated on the map.
A description of all the options available in the DESTINATION window can
be found in the chapter "Options in the Destination window" on page 42.
For detailed information on how to start navigation, please refer to
chapter "Route preview" on page 42. Please read on there.
POI of nationwide significance
POIs of nationwide significance are airports, sights, national
monuments, large ports etc. This way you can find well-known places of
interest even if you don't know the name of their location.
1. In the NAVIGATION window tap on Enter Destination > Search for
POI > Nationwide.
The CATEGORY window opens.
2. Select a category from which you would like to find a POI.
If sub-categories exist for the category you have selected, the Sub
Category list opens.
3. Select the sub-category from which you would like to select a POI.
The DESTINATION list opens. It contains the POI from the selected
category, sorted alphabetically.
Navigation
- 37 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
4. If the list is very long:
►
Tap on
(Close List).
The keyboard appears.
►
Enter a number of letters from the destination.
►
Tap on
(Open List).
The list now contains only those destinations which begin with or
contain the letters entered.
5. Tap on the name of the destination.
The DESTINATION window opens.
6. Tap on Start in order to navigate to the stipulated address.
- or Tap on
(Parking) in order to search for and navigate to a car
park near your destination.
The system calculates the route. When the route calculation is
finished, the map opens in Route preview mode. The destination is
indicated on the map.
A description of all the options available in the DESTINATION window can
be found in the chapter "Options in the Destination window" on page 42.
For detailed information on how to start navigation, please refer to
chapter "Route preview" on page 42. Please read on there.
7.2.5
Information about the destination
For many destinations that you specify, there will be further information
available, stored in the navigation system's database.
There is, for example, a telephone number available for many
restaurants. You can then call the restaurant to reserve a table, for
example.
You have entered a destination. The DESTINATION window is open.
►
Tap on
(Information).
The INFORMATION window opens. It contains all the information about
the specified destination that is stored in the navigation system's
database.
►
►
- 38 -
Tap on Close in order to close the INFORMATION window again.
Tap on
map.
(Show on Map) in order to see the destination on the
Navigation
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
►
►
Tap on
(Save) in order to save the destination in the
FAVOURITES list.
(Only NAVIGON 92 Premium): When your navigation device is
connected to a mobile phone and a phone number has been saved
for the selected destination, you can call this number directly by
tapping on the
7.2.6
(Call) button.
Favourites
Destinations to which you want to travel often can be saved in the
FAVOURITES list.
In the FAVOURITES list you can save up to 500 destinations.
Information on how to save a destination can be found in chapter
"Saving destinations" on page 45.
1. In the NAVIGATION window, tap on Enter Destination > Favourites.
2. Tap on the destination to which you want to navigate.
The DESTINATION window opens.
3. Tap on Start in order to navigate to the stipulated address.
- or Tap on
(Parking) in order to search for and navigate to a car
park near your destination.
The system calculates the route. When the route calculation is
finished, the map opens in Route preview mode. The destination is
indicated on the map.
A description of all the options available in the DESTINATION window can
be found in the chapter "Options in the Destination window" on page 42.
For detailed information on how to start navigation, please refer to
chapter "Route preview" on page 42. Please read on there.
Note: Favourites are indicated on the map by a small flag with their
name. In the NAVIGATION window tap on
(More) > Navigation
Settings > Map Display. Under Show Favourites select whether you
want them to be indicated on the map or not (Yes or No).
7.2.7
Last Destinations
The last 12 destinations to which you have navigated are saved by the
navigation system in the LAST DESTINATIONS list.
Navigation
- 39 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
1. In the NAVIGATION window, tap on Enter Destination > Last
Destinations.
2. Tap on the destination to which you want to navigate.
The DESTINATION window opens.
3. Tap on Start in order to navigate to the stipulated address.
- or Tap on
(Parking) in order to search for and navigate to a car
park near your destination.
The system calculates the route. When the route calculation is
finished, the map opens in Route preview mode. The destination is
indicated on the map.
A description of all the options available in the DESTINATION window can
be found in the chapter "Options in the Destination window" on page 42.
For detailed information on how to start navigation, please refer to
chapter "Route preview" on page 42. Please read on there.
7.2.8
From the phone book
This section is relevant for you only if your navigation device is a
NAVIGON 92 Premium | 92 Premium Live.
Addresses from the telephone book of the active mobile phone with
which you are connected via Bluetooth can be selected as the
navigation destination.
1. In the NAVIGATION window, tap on Enter Destination > From the
phone book.
2. Select the contact you want from the phone book.
3. Tap on the address to which you want to navigate.
The DESTINATION window opens.
4. Tap on Start in order to navigate to the stipulated address.
- or Tap on
(Parking) in order to search for and navigate to a car
park near your destination.
The system calculates the route. When the route calculation is
finished, the map opens in Route preview mode. The destination is
indicated on the map.
For detailed information on how to start navigation, please refer to
chapter "Route preview" on page 42. Please read on there.
- 40 -
Navigation
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
7.2.9
Navigating home
You can save one address as Home Address. You can navigate to your
home address at any time by pressing a single button.
More information about entering your home address can be found in the
chapter "Defining the home address" on page 47.
►
In the NAVIGATION window tap on Take Me Home.
If you have not yet entered your home address, a dialog box will
notify you of this.
The system calculates the route. When the route calculation is
finished, the map opens in Route preview mode. The destination is
indicated on the map.
7.2.10
Selecting destinations on the map
You may select a destination directly on the map. This is a quick way to
select towns, streets and POI.
1. If the map is not open, tap in the button bar on
Map).
2. Tap on
(Show
(Destination search).
The map opens in Destination search mode.
3. Tap on the point to which you want to navigate.
Note: For details of how to change the map view so that your destination
is easily seen refer to the chapter "Map in Destination search mode" on
page 67.
The destination point which you have selected will be indicated on
the map in central position.
4. Tap on Set destination.
The destination point is represented on the map by a pin needle
( ). The corresponding address or the geographical coordinates of
the destination point are shown in the Destination Info box.
5. Tap on the Destination Info box.
The DESTINATION window opens.
6. Tap on Start in order to navigate to the stipulated address.
- or Tap on
(Parking) in order to search for and navigate to a car
park near your destination.
Navigation
- 41 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
The system calculates the route. When the route calculation is
finished, the map opens in Route preview mode. The destination is
indicated on the map.
A description of all the options available in the DESTINATION window can
be found in the chapter "Options in the Destination window" on page 42.
For detailed information on how to start navigation, please refer to
chapter "Route preview" on page 42. Please read on there.
7.2.11
Options in the Destination window
►
In the DESTINATION window tap on
(More).
The OPTIONS window opens. Buttons with various functions then
appear:
Country Info: Opens a window with important traffic regulations of the country in
which the specified destination point lies (e.g. speed restrictions, blood
alcohol limits etc).
Interim Destination: Sets the selected point as interim destination. The
navigation system will first guide you to this interim destination.
Afterwards you can continue navigation to your original destination.
This function is only active during navigation.
Add to Route: Adds the selected point as the starting point in the route plan.
You will be asked whether you want to define more route points on the
map (Yes) or not (No). If you confirm with Yes, the map will open again
in Destination search mode; if you tap on No, the ROUTE PLANNING
window will open. The selected point is entered in it as the starting
point.
Search Nearby: Opens the CATEGORY window. There you can start a search for
POIs near the selected destination point (see "POI nearby" on
page 35).
Home Address: Saves the selected point as your home address.
Weather Service: Shows for the indicated location the current weather data and
a forecast for the next few days.
7.2.12
Route preview
The map is open in Route preview mode.
The navigation destination is depicted by a small flag.
For detailed information refer to the chapter "Map in Route preview
mode" on page 57.
- 42 -
Navigation
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Route Profile
The route is calculated on the basis of a route profile. The current route
profile is indicated at the top right edge of the map on the
Profile) button.
(Route
Route profiles take account of the characteristics and special aspects of
the different modes of transport. For example a route profile for bicycles
will exclude motorways from the route calculation but will include roads
which other vehicles are not allowed to use. And a bicycle profile will
calculate different arrival times than a motorcycle profile.
Note: If you select a pedestrian profile, a type of navigation specially
developed for pedestrians will be started (see "Navigation in Pedestrian
mode" on page 64).
►
Tap on the
(Route Profile) button if you want to select a
different route profile.
For details of how to create and select route profiles refer to chapter
"Route Profiles" on page 69.
MyRoutes
When the MyRoutes function is activated, the navigation system
calculates up to three routes on the basis of the currently selected route
profile and shows them on the map in different colours (orange, green,
blue) and with a number. For each route there is a button with the same
number and a symbol in the same colour.
When calculating the time of arrival or the trip time, the navigation
system takes account of additional factors such as day of the week,
time of day and particularly your previous driving profile.
The route which corresponds best to the selected route profile is
marked with "MyRoute".
Note: Even when the MyRoutes function is activated, sometimes only
one additional route or no additional routes at all can be calculated for
the selected destination. No further suggestion is then shown on the
button in question.
Activate MyRoutes
You can specify whether you want several routes to be available for
selection before the navigation starts.
In the NAVIGATION window tap on
(More) > Navigation
Settings > General. Under Activate MyRoutes select whether you want
the MyRoutes function to be available or not (Yes or No).
Navigation
- 43 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Start
►
Tap on the button of the route which you want to use for the
navigation.
If you have selected the value On Request for the Route Optimisation
setting, then you may be notified of traffic incidents before the
navigation starts (see "Route Optimisation: On Request" on page 80).
Simulating the navigation
You can also simply simulate the navigation from your current position
to a selected destination point.
Note: GPS reception must be good enough to determine your current
position.
Note: When simulation is in progress, the
symbol will appear
instead of the GPS symbol (see "GPS" on page 21).
You have entered a destination. The route has been calculated. The
map is open in Route preview mode.
1. Tap on
►
(More) > Simulation.
If the MyRoutes function has been activated, you will be
prompted to select a route for the simulation.
2. Tap on the button of the route on which you want to simulate the
navigation.
For more details about the MyRoutes function refer to the chapter
"MyRoutes" on page 43.
Stopping the simulation
Simulation is ended in the same way as navigation:
1. Tap on the map to open the button bar.
2. In the button bar tap on
(Navigation Options) or
(Navigation).
3. Tap on Stop Simulation.
No GPS reception
If GPS signal reception is not good enough, the following message will
appear: "GPS reception is currently not sufficient. Navigation starts
automatically as soon as GPS reception is OK again."
- 44 -
Navigation
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
You have the following options:
►
►
►
Wait. As soon as GPS reception is good enough for determining
your position, the route will be recalculated and navigation will
begin.
Tap on Cancel. The destination appears again in the DESTINATION
window and is now also saved in the LAST DESTINATIONS list.
Tap on Demo. The route will be calculated using the centre of the
destination location as starting point. Navigation will then be
simulated on this route.
Ending the presentation
1. Tap on the map to show the button bar.
2. In the button bar tap on
(Navigation Options) or
(Navigation).
3. Tap on the Stop Simulation button at the top left edge of the screen.
7.3
Managing destinations
Every destination you enter and destinations from the LAST
DESTINATIONS and FROM THE PHONE BOOK lists can be saved in the
FAVOURITES list. This makes sense if you frequently navigate to this
particular destination.
Destinations from the LAST DESTINATIONS and FAVOURITES lists can be
deleted, destinations from the FAVOURITES list can also be renamed.
Note: Favourites are indicated on the map by a small flag with their
name. In the NAVIGATION window tap on
(More) > Navigation
Settings > Map Display. Under Show Favourites select whether you
want them to be indicated on the map or not (Yes or No).
7.3.1
Saving destinations
You have entered a destination (see "Enter an Address" on page 32 or
"Points of interest" on page 35).
- or You have selected a destination from the LAST DESTINATIONS list or
from the FROM THE PHONE BOOK list (see "Last Destinations" on page 39
or "From the phone book" on page 40).
The DESTINATION window is open.
1. In the DESTINATION window tap on
(Save).
The NAME OF THE DESTINATION window opens.
Navigation
- 45 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
2. Enter a name for the destination.
3. Tap on Save.
7.3.2
Deleting a destination
You can delete individual destinations from the FAVOURITES list or from
the LAST DESTINATIONS list. You can also delete the complete
FAVOURITES list or LAST DESTINATIONS list.
Deleting a single destination
1. In the NAVIGATION window tap on Enter Destination.
The ENTER DESTINATION window opens.
2. Tap on Favourites or Last Destinations to open the corresponding
list from which you want to delete a destination.
3. Tap on
(More) > Edit.
The EDIT FAVOURITES or EDIT LAST DESTINATIONS window opens.
4. Tap on the
(Delete Destination) button to the right of the
destination you want to delete.
5. Confirm with Yes the question whether you really want to delete the
destination.
Deleting the complete 'Favourites' or 'Last Destinations' list
1. In the NAVIGATION window tap on Enter Destination.
The ENTER DESTINATION window opens.
2. Tap on Favourites or Last Destinations to open the corresponding
list which you want to delete.
3. Tap on
(More) > Delete All.
4. Confirm with Yes the question whether you really want to delete all
the destinations.
The deleted list is deactivated. The Favourites or Last Destinations
button is shown in the ENTER DESTINATION window in grey.
7.3.3
Renaming a destination from the Favourites list
1. In the NAVIGATION window tap on Enter Destination.
The ENTER DESTINATION window opens.
2. Tap on Favourites.
3. in the FAVOURITES window tap on
(More) > Edit.
The EDIT FAVOURITES window.
4. Tap on the
(Rename) button to the right of the destination
you want to rename.
- 46 -
Navigation
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
5. Enter a new name.
6. Tap on Save.
7.3.4
Defining the home address
You can always start navigation to your home address very quickly by
tapping in the NAVIGATION window on Take Me Home.
You can define exactly one destination as your home address.
Your home address is saved in the FAVOURITES list under the name My
Address and is marked there by a house symbol
.
Note: The home address is also indicated on the map by an orange
house symbol
.
Saving the home address
1. In the NAVIGATION window tap on Take Me Home.
The NO HOME ADDRESS window opens with the following message:
"You still have not specified the home address. Do it now?"
2. Tap on Yes.
The SET YOUR HOME ADDRESS window opens.
3. Enter your home address or select a saved address from one of the
lists FAVOURITES, LAST DESTINATIONS or PHONE BOOK (see also
"Specifying a destination" on page 31).
4. In the DESTINATION window tap on Home Address to save the
entered address as the home address.
7.3.5
Changing the home address
You can define a different address as the home address at any time.
Proceed as follows:
1. Delete your home address from the FAVOURITES list (see "Deleting
a destination" on page 46).
2. Enter the new home address (see "Saving the home address" on
page 47).
Note: Any destination which you have entered or selected while
specifying a destination can easily be defined as the home address. In
the DESTINATION window tap on
(More) > Home Address to
save the selected destination as the new home address.
Navigation
- 47 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
7.4
Multi-leg routes
It is possible to plan routes without GPS reception, for example in the
comfort of your home. Planned routes can be saved for later use. This
allows you to plan as many routes as you like, for example for your
holidays.
7.4.1
Opening the route planning
1. In the NAVIGATION window tap on Enter Destination.
The ENTER DESTINATION window opens.
2. Tap on Route Planning.
The ROUTES window opens. You have the following options:
►
Tap on New Route if you want to plan a new route.
►
Tap on Load Route if you want to load or edit a saved route.
►
7.4.2
Tap on Last Route if you want to reload the route which you last
planned or last loaded.
Planning a new route
►
In the ROUTES window tap on New Route.
The ROUTE PLANNING window opens.
Entering the starting point
The starting point of a route is the point at which you want to begin your
trip. This is not necessarily the current location. If you are planning a
route for your holidays at home, you could, for example, enter your
hotel as the starting point.
The starting point is only important if you want to see a planned route
on the map but currently have no GPS reception, or if you are not
currently at the planned starting point. This is why your selected starting
point has the flow number "0".
As soon as you start navigation, your current location will be used as
the starting point for the route calculation.
The first leg of the route is therefore the journey to the route point with
flow number "1".
1. Tap on Add Route Point.
The ADD ROUTE POINT window opens.
If you want to enter your current location as the starting point:
2. Tap on Current Position.
3. In the DESTINATION window tap on Add.
- 48 -
Navigation
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
If you want to enter a different starting point:
2. Tap on the button for how you want to enter the destination.
3. Enter the starting point according to the relevant section in chapter
"Specifying a destination" on page 31.
4. In the DESTINATION window tap on Add.
The ROUTE PLANNING window opens again. The address data of the
starting point are shown.
The starting point is represented graphically by an orange flag
with the serial number "0".
Entering route points
The route points of a route are the destinations that you want to
navigate to.
In front of each route point is a destination flag with a serial
number of the respective route point.
1. Tap on Add Route Point.
The ADD ROUTE POINT window opens.
2. Tap on the button for how you want to enter the destination.
3. Enter the route point (see the relevant section in chapter
"Specifying a destination" on page 31).
4. In the DESTINATION window tap on Add.
The selected route point is now shown next to its flow number.
Repeat these steps for each destination that you want to add to your
route.
7.4.3
Editing route points
The starting point and route points can be deleted from a route. The
order of the route points can be changed as you wish.
Note: The starting point (serial number "0") can be shifted only if the
setting Current Position has not been assigned to it. If you shift the
starting point, the route point with the serial number "1" will become the
starting point.
Changing the order of the route points
1. in the ROUTE PLANNING window tap on
Route.
(More) > Edit
The EDIT ROUTE window opens.
Navigation
- 49 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
2. Tap on the
(Route Point Down) button to shift the selected
route point further to the back (example: route point 2 becomes
route point 3).
- or Tap on the
(Route Point Up) button to shift the selected route
point further to the front (example: route point 3 becomes route
point 2).
Note: You can also shift the route points with your finger. During the
shifting, an orange cursor
indicates the
current insertion position.
Delete route point
1. in the ROUTE PLANNING window tap on
Route.
The EDIT ROUTE window opens.
(More) > Edit
2. Tap on the
(Delete Route Point) button in order to delete the
selected route point.
3. Confirm the deletion of the route point.
7.4.4
Managing routes
You can save each planned route under a particular name.
Note: Only the start point and route points will be saved, not the
calculated route. When you load a saved route, it must be recalculated
before navigation can start.
You can load, rename or delete stored routes.
Saving routes
The ROUTE PLANNING window is open. You have entered the starting
point and at least one route point.
1. in the ROUTE PLANNING window tap on
Route.
(More) > Save
2. Enter a name for the route.
3. Tap on Save.
The destination is now saved to the SAVED ROUTES list. The ROUTE
PLANNING window is opened.
- 50 -
Navigation
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Loading routes
1. Open the ROUTES window (see "Opening the route planning" on
page 48).
2. Tap on Load Route.
The LOAD ROUTE window opens. It shows all the saved routes in
alphabetical order.
3. Tap on the route that you want to load.
The ROUTE PLANNING window opens. The starting point and the
route points of the loaded route have been entered. For the route
calculation the starting point is replaced by the current position. You
will now be guided to the first route point.
Renaming Routes
1. Open the ROUTES window (see "Opening the route planning" on
page 48).
2. Tap on Load Route.
The LOAD ROUTE window opens.
3. in the LOAD ROUTE window tap on
(More) > Edit Route.
4. Tap on the
(Rename) button to the right of the route you
want to rename.
5. Enter a new name.
6. Tap on Save.
Deleting routes
You can delete a single saved route. Similarly you can also delete the
complete SAVED ROUTES list.
Deleting a single route
1. Open the ROUTES window (see "Opening the route planning" on
page 48).
2. Tap on Load Route.
The LOAD ROUTE window opens.
3. in the LOAD ROUTE window tap on
(More) > Edit Route.
4. Tap on the
(Delete Route) button to the right of the route you
want to delete.
5. Confirm with Yes the question whether you really want to delete the
route.
Navigation
- 51 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Deleting the complete Saved Routes list
1. Open the ROUTES window (see "Opening the route planning" on
page 48).
2. Tap on Load Route.
The LOAD ROUTE window opens.
3. in the LOAD ROUTE window tap on
Routes.
(More) > Delete All
4. Confirm with Yes the question whether you really want to delete all
the saved routes.
Note: Saved routes which were already installed on your device when
you purchased the navigation system will not be deleted but will remain
in the list.
7.4.5
Restoring the last route
When you close the route planning, the route which was last shown
in the ROUTE PLANNING window with a starting point and at least
one route point will be automatically cached as the 'Last Route'.
The advantage of this is that a newly planned route or changes to a
saved route are not immediately lost when you close the route
planning without having first saved the route or the changes to a
route.
1. In the NAVIGATION window tap on Enter Destination.
The ENTER DESTINATION window opens.
2. Tap on Route Planning.
The ROUTES window opens.
►
Tap on Last Route.
The ROUTE PLANNING window opens. The starting point and the
route point(s) of the last route are entered.
7.4.6
Calculating and displaying routes
It is possible to calculate and display a planned route on the map even
without GPS reception in order to get an impression of the journey.
The ROUTE PLANNING window is open. The starting point and at least
one route point have been entered.
►
Tap on Show Route.
The map opens in Route preview mode.
The starting point and the route points are marked by flags. The
distance and the estimated trip time is given for each leg of the
route.
- 52 -
Navigation
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
7.4.7
Simulating routes
It is also possible simply to simulate navigation on a planned route.
Note: GPS reception is not necessary for simulation.
If you have planned a multi-leg route, only the first leg will be simulated.
Note: When simulation is in progress, the
symbol will appear
instead of the GPS symbol (see "GPS" on page 21).
You have calculated and displayed a route. The map is open in Route
preview mode.
1. Tap on
►
(More) > Simulation.
If you have planned a route with only one route point and the
MyRoutes function is activated, you will be prompted to select
a route for the simulation.
The route will be recalculated for simulation purposes.
2. Tap on the button of the route on which you want to simulate the
navigation.
For more details about the MyRoutes function refer to the chapter
"MyRoutes" on page 54.
Stopping simulation
Simulation is ended in the same way as navigation:
1. Tap on the map to open the button bar.
2. In the button bar tap on
(Navigation Options) or
(Navigation).
3. Tap on the Stop Simulation button at the top left edge of the screen.
7.4.8
Route preview
You have calculated and displayed a route. The map is open in Route
preview mode.
The navigation destination is depicted by a small flag.
For detailed information refer to the chapter "Map in Route preview
mode" on page 57.
Navigation
- 53 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Route Profile
The route is calculated on the basis of a route profile. The current route
profile is indicated at the top right edge of the map on the
Profile) button.
(Route
Route profiles take account of the characteristics and special aspects of
the different modes of transport. For example a route profile for bicycles
will exclude motorways from the route calculation but will include roads
which other vehicles are not allowed to use. And a bicycle profile will
calculate different arrival times than a motorcycle profile.
Note: If you select a pedestrian profile, a type of navigation specially
developed for pedestrians will be started (see "Navigation in Pedestrian
mode" on page 64).
►
Tap on the
(Route Profile) button if you want to select a
different route profile.
For details of how to create and select route profiles refer to chapter
"Route Profiles" on page 69.
Note: When you load routes which originate from a different provider
than NAVIGON, it may be impossible for you to change the route profile
of this route.
MyRoutes
When the MyRoutes function is activated, the navigation system
calculates up to three routes on the basis of the currently selected route
profile and shows them on the map in different colours (orange, green,
blue) and with a number. For each route there is a button with the same
number and a symbol in the same colour.
When calculating the time of arrival or the trip time, the navigation
system takes account of additional factors such as day of the week,
time of day and particularly your previous driving profile.
The route which corresponds best to the selected route profile is
marked with "MyRoute".
Note: Even when the MyRoutes function is activated, sometimes only
one additional route or no additional routes at all can be calculated for
the selected destination. No further suggestion is then shown on the
button in question.
- 54 -
Navigation
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Activate MyRoutes
You can specify whether you want several routes to be available for
selection before the navigation starts.
►
In the NAVIGATION window tap on
(More) > Navigation
Settings > General. Under Activate MyRoutes select whether you
want the MyRoutes function to be available or not (Yes or No).
Start
►
Tap on the button of the route which you want to use for the
navigation.
If you have selected the value On Request for the Route Optimisation
setting, then you may be notified of traffic incidents before the
navigation starts (see "Route Optimisation: On Request" on page 80).
No GPS reception
If GPS signal reception is not good enough, the following message will
appear: "GPS reception is currently not sufficient. Navigation starts
automatically as soon as GPS reception is OK again."
You have the following options:
►
►
Wait. As soon as GPS reception is good enough for determining
your position, the route will be recalculated and navigation will
begin.
Tap on Cancel. The map opens in Route preview mode.
8
Working with the map
8.1
Selecting the navigation map
Each country has its own navigation map. Seamless navigation over
several maps on one continent is possible however if a continuous
route can be calculated with the maps saved on the device.
Even if maps of countries in other continents are available on the
navigation device, it can only ever work with the maps of a single
continent.
In the NAVIGATION window tap on
(More) > Navigation
Settings > Map Display > Countries in to see which maps are currently
in use. Here you can also select a different continent if the navigation
device contains any maps of countries on other continents.
Working with the map
- 55 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
8.2
Map in Standard mode
The map is always in Standard mode when you are not navigating,
have not calculated a route and are not searching for a destination on
the map.
Under the following circumstances the map switches automatically to
Standard mode:
►
►
You begin a trip while the NAVIGATION window is open. The switch
takes place after only a short while.
You reach the destination of a navigation in Vehicle mode.
To open the map:
►
In the button bar tap on
(Show Map).
Note: If GPS reception is not good enough to determine your current
position, your last position will be indicated. If this is not saved in the
navigation system, only an empty map section will appear.
The following features are typical for this view:
►
►
Indicated in the middle of the lower third is your current position
(orange arrow). The map view follows your movements so that your
position is always visible on the screen.
The scale of the map changes according to your speed.
Button bar
For easier and quicker orientation on the map, the button bar is hidden
in Standard map mode. The screen looks tidier and more clearly
arranged.
►
Tap on any point of the map to show the bar with the buttons.
The button bar is hidden again automatically after a short while.
- 56 -
Working with the map
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Map options in Standard mode
1. Tap on the map to show the button bar.
2. Tap on
(Navigation Options).
A window opens with several buttons which you can use to access
the most important functions for the map.
Traffic: Opens the TRAFFIC window in which active traffic messages are listed
(see "TMC (Traffic Information)" on page 79).
Day/Night: Changes between "Day" and "Night" screen modes.
MyReport: Opens the MYREPORT window. Here you can notify NAVIGON about
any changes to traffic monitoring systems and routing.
2D/3D: Changes between 2D and 3D mode.
Country Info: Opens a window with important traffic regulations of the country in
which you are currently travelling (e.g. speed restrictions, blood alcohol
limits etc).
Route Profile: Opens the ROUTE PROFILES window. Here you can view the
options for route planning and, if necessary, change them.
Save Position: Opens the NAME OF THE DESTINATION window. Here you can
save your current position under a certain name in the FAVOURITES list.
GPS Status: Opens the GPS STATUS window. Here you can see details
regarding GPS reception. You can also save the data of the current
location (see "GPS Status, saving the current location" on page 78).
8.3
Map in Route preview mode
You have entered a destination and tapped on Start.
- or You have planned or loaded a route and tapped on Show Route.
The map opens in Route preview mode.
Working with the map
- 57 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
1
When the MyRoutes function is activated, up to three numbered routes
are indicated on the map in different colours (orange, green, blue).
In the following cases only one route is shown:
►
2
The MyRoutes function is deactivated (see "MyRoutes" on
page 43).
►
You have planned a route with more than one route point.
►
A route profile with the Pedestrian speed profile is active.
The destination is marked with a little flag.
If you display a planned or loaded route, the starting point and each
route point will be marked with a little flag.
In the case of a multi-leg route, the distance and the estimated driving
time for each leg are displayed.
3
The current position is indicated (orange arrow).
If you display a planned or loaded route and the specified starting point
is not your current location, then it is possible that your current position
will not be shown on the preview.
4
The current route profile is indicated on the
(Route Profile) button.
The symbol illustrates the mode of transport on which the profile is
based (see "Route Profiles" on page 69).
►
5
- 58 -
Tap on the symbol to select a different route profile.
For each route (orange, green, blue) there is a button with the same
number and a symbol in the same colour. Indicated on each button are
the estimated time of arrival, the total distance and the estimated
duration of the particular route.
Working with the map
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
If traffic messages exist for a route and the value On Request is
selected for the Route Optimisation setting, the number of messages
will be indicated in a small traffic sign on the button. The reported
obstructions are also indicated on the route.
The route which corresponds best to the selected route profile is
marked with "MyRoute".
If the MyRoutes function is not activated, only one route is presented.
As soon as you tap on a button, navigation along the route in question
will start.
►
►
Tap on the
(Route Profile) button (see figure, point 4) in order
to select a different route profile.
To start the navigation, tap on the button for the route (see figure,
point 5) you want to use for the navigation.
If you display a planned or loaded route, the route may be
recalculated. The starting point for the calculation will now be your
current location. You will first be guided to the first route point
entered.
►
8.4
Tap on
map.
(Show on Map) to show the calculated route(s) on the
Map in Navigation mode
How you are guided to your destination depends on various factors (the
route profile selected, your current location, the type of route planning,
traffic information along the route, etc.). Your navigation system
automatically selects the optimum method.
8.4.1
Navigation in Vehicle mode
After the route was shown in Route preview mode, navigation was
started.
The map opens in Navigation mode.
Working with the map
- 59 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
1
If any information is available about the sign which you should follow, it
will be shown at the top edge of the screen.
►
2
Tap on the display to hide the sign.
The POI on Your Route bar will open (see "POI on Your Route" on
page 76). This button is not visible when a sign (see point 1) or a new
traffic message along the route (see point 7) is being shown.
3
Possible speed limits may be shown here.
4
The route is highlighted in orange.
5
When two manoeuvres need to be executed in quick succession, the
small arrow box indicates the second manoeuvre to be executed.
6
The large arrow box shows a diagram of the next junction which you
should turn on to. The distance remaining to this junction is indicated
underneath.
As you get closer to the junction you will see a progress bar in addition
to the distance:
The nearer you get to the junction, the more yellow spots are displayed.
If you don't have to change direction for a long time, you will see only a
straight arrow. The distance you must continue straight on is indicated
underneath the arrow.
- 60 -
Working with the map
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
If you tap on the large arrow box, the current route instruction will
be repeated. At the same time the Driving Directions bar is
phased in, allowing you to regulate the volume of the spoken driving
instructions (see "Volume" on page 62).
If a traffic message along your route is reported, the Traffic
Obstruction box will be shown at the top edge of the screen and the
►
7
Traffic Information button (see point 8) will be phased in.
►
8
Tap on
(Close) to phase out the box.
The Traffic Information button is shown together with the Traffic
Obstruction box (see point 7) when an obstruction is reported along
your route.
If a distance is indicated on the button, no detour route was calculated
yet for the traffic obstruction in question.
►
Tap on the Traffic Information button to open the TRAFFIC
OBSTRUCTION window (see "Route Optimisation: On Request" on
page 80). It shows a map view with the route section affected by the
message and a possible detour.
If no distance is indicated, all the obstructions which are reported for
your route and would lead to a loss of time will be avoided.
►
Tap on the Traffic Information button. A message appears telling
you that the route has been optimised already. Tap on Details to
open the TRAFFIC window (see "Displaying traffic information" on
page 83).
For details of the TMC function refer to chapter "TMC (Traffic
Information)" on page 79.
9
When you get close to your destination, the Parking button will appear.
When you tap on the Parking button, the OPTIONS window opens and
you have two options:
►
►
You can select a car park from where you can then continue on
foot.
When you have parked your vehicle, you can save the current
position and continue the navigation on foot.
For a description of the Parking function refer to chapter "Parking near
the destination" on page 73.
10
Ahead of many junctions the information from points 11 and 12 is
hidden. Instead you are shown which lanes lead to your destination.
►
11
Tap on the box in order to hide the lane information.
The height above sea level and the current speed are shown here.
Working with the map
- 61 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
12
In the Total box you can see the distance remaining to the destination,
the estimated duration of the trip and the estimated time of arrival.
►
►
13
Tap on the arrival time if you want to see the estimated driving time
instead.
Tap once again on the info box if you want to see the estimated
time of arrival.
If you are navigating a multi-leg route, you will see the remaining
distance to the next interim destination and the estimated time of arrival
in the Next box.
►
►
Tap on the arrival time if you want to see the estimated driving time
instead.
Tap once again on the info box if you want to see the estimated
time of arrival.
14
The name of the route section that you need to drive onto next is shown
in the upper road box.
15
The name of the section you are currently driving on is shown in the
lower road box.
16
Your current position is indicated on the map (orange arrow). The
section of the map displayed changes continually so that your current
position is always in view on the map.
Note: The displays of many of the above mentioned areas can be
configured. In the button bar tap on
(Navigation Options) >
(More) > Navigation Settings. Some displays will only function
if the required information is available on the map.
►
Tap on
(Destination search) to view the map in
Destination search mode (see "Map in Destination search mode"
on page 67).
Button bar
For easier and quicker orientation on the map, the button bar is hidden
in Navigation map mode.
►
Tap on any point of the map to show the bar with the buttons.
The button bar is hidden again automatically after a short while.
Volume
The volume of the spoken driving instructions can be adjusted during
navigation.
1. Tap on the large arrow box which appears at the bottom left edge of
the screen during navigation (see figure "Navigation in Vehicle
mode", point 6.
- 62 -
Working with the map
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
The Driving Directions volume bar opens. It contains three buttons
for adjusting the volume.
(Volume on/off),
2. Tap on
(Quieter),
(Louder).
(Volume) again or wait a few seconds.
The volume bar closes.
Note: You can also regulate the volume at any time as follows:
►
In the button bar tap on
(Navigation Options) or
(Navigation).
►
Then tap at the top right edge of the screen on
open the volume bar.
(Volume) to
Reality View
The map switches to Reality View mode when you approach one of the
following points while driving on the motorway:
►
a motorway junction
►
a three-leg motorway junction
►
the exit you must take to leave the motorway
The Reality View mode shows with greater clarity the signposting and
lanes you must follow.
This display does not change until you have passed the spot indicated.
The map will then change back to Navigation mode.
►
If you want to change to Navigation mode before then, just tap on
any point on the map.
Working with the map
- 63 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Note: The Reality View mode is not available for all motorway
junctions and three-leg motorway junctions. Availability depends on the
map material used.
8.4.2
Navigation in Pedestrian mode
This mode is active if you have selected a pedestrian route profile for
the navigation. These profiles can be identified by the
(Pedestrian)
symbol.
After the route was shown in Route preview mode, navigation was
started.
You receive a route proposal which is calculated on the basis of the
digitalised road system. You are also shown in which direction your
destination lies. If you leave the proposed route, for example in order to
take a more pleasant route through a park, you will still see at all times
the direction in which your destination lies.
Please note:
►
►
►
►
►
You will receive no navigation instructions. Instead you will receive
a message when you are getting close to the destination.
The map view follows your movements so that your position is
always visible on the screen.
If you leave the calculated route, the route will not be recalculated
automatically.
If you are navigating on a route and more route points are still to
follow, navigation to the next route point will be started immediately
after the message.
Traffic messages are not taken into account.
Note: In pedestrian mode you must take care to hold the device without
covering it at the top. The GPS receiver is located there and its
reception could be impaired..
- 64 -
Working with the map
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
1
The direction in which your destination lies is indicated (red triangle).
2
The part of the route which you have already covered is marked in
green.
3
The compass indicates where north is.
4
The scale of the map section shown is indicated here. The length of the
ruler corresponds to the distance indicated.
5
The current position is indicated (orange arrow). You can see in which
direction you are moving.
6
The route which was calculated using the digitalised road system is
marked in orange.
7
In this box you are shown the distance remaining to the destination
(beeline).
Operating the map
Zoom Out: The map section shown becomes larger, but you will
see fewer details.
Zoom In: The map section becomes smaller, but you will see more
details.
Centre the position: During pedestrian navigation you can shift the
visible map section in order to view the surrounding area on the
map. This may mean that your current position can no longer be
seen on the visible section of the map.
►
Tap on the Centre the position button if your current position can no
longer be seen on the visible section of the map.
Working with the map
- 65 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Your current position will be shown again on the map.
Recalculate route: Recalculates the route. Use this function if you
have wandered far from the calculated route and would like a new
route proposal.
8.4.3
Map options in Navigation mode
1. Tap on the map to show the button bar.
2. Tap on
(Navigation Options).
A window opens with several buttons which you can use to access
the most important functions for the map.
Note: Not all the options mentioned here are available in all map
modes. For example, the Traffic, Block and MyRoutes functions are not
available in Pedestrian map mode.
Traffic: Opens the TRAFFIC window in which active traffic messages are listed
(see "TMC (Traffic Information)" on page 79).
Day/Night: Changes between "Day" and "Night" screen modes.
Block: Opens the BLOCK window in which you can block a section of the route
lying ahead in order to calculate a route which avoids this section, e.g. if
you have heard on the radio of a traffic jam relating to this section. (see
"Block" on page 79).
Skip next destination:Tap on this button to omit the next route point. This button
is active only when at least 2 route points still lie ahead of you (see
"Multi-leg routes" on page 48).
MyReport: Opens the MYREPORT window. Here you can notify NAVIGON about
any changes to traffic monitoring systems and routing.
Parking: Starts the search for car parks near the destination. Once you have
decided in favour of a car park, you can navigate there directly.
MyRoutes: Opens the map in Route preview mode. You are provided with up
to three different suggestions as to how you can continue your journey.
Select one of the routes offered.
2D/3D: Changes between 2D and 3D mode.
Country Info: Opens a window with important traffic regulations of the country in
which you are currently travelling (e.g. speed restrictions, blood alcohol
limits etc).
Route Profile: Opens the ROUTE PROFILES window. Here you can view the
options for route planning and, if necessary, change them.
- 66 -
Working with the map
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Save Position: Opens the NAME OF THE DESTINATION window. Here you can
save your current position under a certain name in the FAVOURITES list.
GPS Status: Opens the GPS STATUS window. Here you can see details
regarding GPS reception. You can also save the data of the current
location (see "GPS Status, saving the current location" on page 78).
8.4.4
Quitting navigation
You quit the navigation in the same way in all modes:
1. Tap on the map to open the button bar.
2. In the button bar tap on
(Navigation Options) or
(Navigation).
3. Tap on the Stop Navigation button at the top left edge of the
screen..
8.5
Map in Destination search mode
The map is always in Destination search mode when at the bottom
edge of the screen you can see a bar with buttons for changing the map
section and the Set destination or Remove destination button.
For detailed information about selecting a destination on the map refer
to chapter "Selecting destinations on the map" on page 41.
When you are driving, the map does not change. It is always orientated
with north at the top.
Working with the map
- 67 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
8.5.1
Changing the map section
The following options for searching for and displaying destinations and
other information on the map are available:
With your finger:
You can shift the map in any direction you want with your finger.
With the buttons at the bottom edge of the screen:
Zoom Out: The map section shown becomes larger, but you will see
fewer details.
Zoom In: The map section shown becomes smaller, but you will see
more details.
Entire Route: This button is visible only when a route has been
calculated already. Tap on this button to show the complete route on
the map. If no route has been calculated yet, the Show selected
destination button will appear instead.
Show selected destination: This button is visible only when no route
has been calculated yet. Tap on this button when you have shifted the
map section and the already entered destination can no longer be seen.
The entered destination is then shown again on the map in central
position.
Current Position: Selects the section of map displayed so that the
current location is visible at the centre of the map.
8.5.2
Set destination
1. Tap on the point of the map which you want to set as the
destination point.
The point which you have selected will be indicated on the map in
central position.
2. Tap on Set destination.
The destination point is represented on the map by a pin needle
( ). The corresponding address or the geographical coordinates of
the destination point are shown in the Destination Info box.
The Remove destination button will now be shown instead of the
Set destination button.
- 68 -
Working with the map
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
3. Tap on the Destination Info box.
The DESTINATION window opens. You have the following options:
4. Tap on Start to navigate to the selected destination point.
- or Tap on
(Parking) in order to search for and navigate to a car
park near your destination.
8.5.3
Shifting the destination point
A destination which you have set on the map can be shifted to a
different point.
►
Drag the pin needle to the required position.
- or -
►
8.5.4
Tap on the point of the map which you want to set as the
destination point.
Deleting a destination point
You can cancel the setting of a destination at any time.
►
Tap on the Remove destination button to delete the set destination
point.
You can then select a new destination point as described under
"Set destination".
9
Useful functions
9.1
Route Profiles
Route profiles define the characteristics and special aspects of the
different modes of transport which are to be taken into account when
calculating routes. For example a route profile for bicycles will exclude
motorways from the route calculation but will include roads which other
vehicles are not allowed to use. And different arrival times will be
calculated for a bicycle than for a motorcycle for example.
9.1.1
Route profile settings
A route profile is made up of several settings:
►
►
Useful functions
Speed Profile: Defines the mode of transport (e.g. Bicycle,
Pedestrian, Car, ...).
Type of Route: Defines the type of route which is to be calculated
(e.g. Optimum Route, Fast Route, ...).
- 69 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
►
►
Motorways, Ferries, Restricted Areas: Defines whether these types
of road are allowed to be used.
Use of Toll Roads: defines whether toll roads are allowed to be
used when calculating the route
►
Tap on the
(Edit) button.
The USE OF TOLL ROADS window opens.
►
Adapt the individual settings to your needs (Yes, No, Ask
before) (see also "Configuring the Navigation System" on
page 118).
If you activate the Ask before setting, every time your route can
take a toll road you will be prompted to make the corresponding
setting(s).
For each setting there is a
(Help) button. When you tap on it you will
see an exact definition of the setting in question.
The number of possible settings depends on the selected speed profile.
For example, for the Pedestrian speed profile there are no Motorways
and Use of Toll Roads settings
9.1.2
NAVIGON basic profiles
A basic profile is already defined for each speed profile.
Bicycle
Pedestrian
Lorry
Motorbike
Car
The speed profile of a basic profile cannot be changed. You can adapt
the other settings to your requirements.
Basic profiles cannot be renamed or deleted.
To have a choice of different profiles for example for several cars, you
can create your own route profiles.
- 70 -
Useful functions
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
9.1.3
Creating a new route profile
You can create your own route profiles. This makes sense for example
if you own two cars and only one has a prepaid toll disc for Austrian
motorways.
1. In the button bar tap on
Profile.
(Navigation Options) > Route
The ROUTE PROFILES window opens.
2. Tap on
(More) > Edit.
3. Tap on
(Copy) to the right of the route profile which you want
to use as basis for the new profile.
4. In the NAME OF THE ROUTE PROFILE window enter a name for the
new route profile.
5. Tap on Save.
6. Adapt the route profile to your requirements.
7. Tap on OK.
The new route profile is shown in the EDIT window.
8. Tap on OK.
The new route profile is shown in the ROUTE PROFILES list.
9.1.4
Selecting a route profile
1. In the button bar tap on
Profile.
(Navigation Options) > Route
The ROUTE PROFILES window opens.
2. Tap on the name of the route profile which you want to use.
3. Tap on OK.
9.1.5
Managing route profiles
User-defined route profiles can be edited, renamed and deleted.
Editing a route profile
1. In the button bar tap on
(Navigation Options) > Route
Profile.
The ROUTE PROFILES window opens.
2. Tap on the
to edit.
(List) button alongside the route profile that you want
3. Make the required settings.
Useful functions
- 71 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
4. Tap on OK.
The Use of Toll Roads setting is comprised of several individual
settings. For example for each country with toll motorways you can
select whether you want to use these roads for the navigation.
1. Tap on the
(Edit) button alongside the Use of Toll Roads
setting.
The USE OF TOLL ROADS window opens.
2. Adapt the individual settings to your requirements (Yes, No, Ask
before).
If you activate the Ask before setting, each time the route preview
wants to calculate a route with a toll road you will be asked whether
you want to use the type of toll roads in question. You can then lay
down this setting for future journeys as well.
Renaming a route profile
1. In the button bar tap on
Profile.
(Navigation Options) > Route
The ROUTE PROFILES window opens.
2. Tap on
(More) > Edit.
3. Tap on the
(Rename) button alongside the route profile that
you want to rename.
4. Enter the new name for the route profile.
5. Tap on Save.
Note: Basic profiles cannot be renamed.
Deleting a route profile
1. In the button bar tap on
(Navigation Options) > Route
Profile.
The ROUTE PROFILES window opens.
2. Tap on
(More) > Edit.
3. Tap on the
(Delete) button alongside the route profile that you
want to delete.
4. A dialog window prompts you to confirm deletion.
5. Tap on Yes.
Note: Basic profiles cannot be deleted.
- 72 -
Useful functions
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
9.2
Screenshots
You can create and save screenshots of the content currently shown on
the screen at any moment.
9.2.1
Enabling screenshots
1. In the NAVIGATION window tap on
(More) > System
Settings > General > Enable Screenshots.
2. Select whether you want to enable screenshots (Yes) or not (No).
The
(Screenshots) button appears at the bottom right edge of
the screen.
9.2.2
Creating a screenshot
►
Tap on the
(Screenshots) button.
The screen is saved as a graphic. The
not shown in the figure.
(Screenshots) button is
The screenshots are saved in the ScreenShots folder. This folder can
be found either in the internal memory of the navigation device, on the
inserted memory card or in both memories.
9.3
Parking near the destination
When you get close to your destination, the
(Parking) button
will appear on the screen. This button also remains visible after you
have reached your destination as long as you stay close to the
destination and the map is not closed.
The following scenarios are imaginable:
Continuing on foot
You see a car park, park your vehicle and want to continue to the
destination on foot.
1. Tap on the
(Parking) button.
The OPTIONS window opens.
2. Tap on Pedestrian mode.
The following message appears: "Your current position has been
saved. You will find it in the 'Favourites' list as 'My Vehicle'. This
enables you to easily find the way back to your vehicle."
Useful functions
- 73 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
3. Tap on OK.
The position of your vehicle is marked on the map by a flag with a
star.
The navigation continues to guide you to the destination in
Pedestrian mode.
Searching for a car park
You want to be guided to a car park near the destination. From there
you want to walk to the destination.
1. Tap on the
(Parking) button.
The OPTIONS window opens.
2. Tap on Parking Close to Destination.
The PARKING CLOSE TO DESTINATION window opens.
It contains a list of possible car parks in order of distance from your
destination.
3. Tap on the car park where you want to park your vehicle.
The INFORMATION window opens. In it you are shown more
information about this car park.
4. Tap on Interim Destination.
5. The system recalculates the route. Then navigation to the selected
point begins. When you arrive there, the following message
appears: "Your current position has been saved. You will find it in
the 'Favourites' list as 'My Vehicle'. This enables you to easily find
the way back to your vehicle."
6. Tap on OK.
The position of your vehicle is marked on the map by a flag with a
star.
The navigation continues to guide you to the destination in Pedestrian
mode.
Back to the destination
You have reached your destination. Navigation has ended. For some
reason, however, you carry on driving, perhaps because you were
unable to find a place to stop. Now you want to be guided back to the
destination.
1. Tap on the
(Parking) button.
2. Tap on Last Destination.
The navigation now guides you back to the original destination in the
mode corresponding to the selected route profile.
- 74 -
Useful functions
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
NAVIGON Clever Parking: Current information about parking
options
Some parking options are marked by a small asterisk (e.g.
). There
is more information available for these parking options, e.g. opening
times or the number of parking spaces for women or the number of
parking spaces for the handicapped.
This information is becoming available for more and more parking
options. Regular updates of this information can easily be obtained via
the NAVIGON Fresh software. NAVIGON Fresh can be downloaded
free of charge from the website www.navigon.com/fresh.
9.3.1
Special functions along a route with several stages
You are navigating along a route with several stages. There is at least
one more stage left after your momentary destination.
You let yourself be guided to the destination with one of the above
described functions in Pedestrian mode.
When you get near to this destination, the
(Destination
reached) button appears at the left edge of the screen.
The following scenarios are imaginable:
Back to My Vehicle
You want to return to your vehicle in order to drive with it to the
destination of the next stage.
1. Tap on the
(Destination reached) button.
The OPTIONS window opens.
2. Tap on Back to My Vehicle.
The navigation system now guides you in Pedestrian mode to the
place where you parked your vehicle.
As soon as you get near to your vehicle, the
(Vehicle
reached) button appears at the left edge of the screen.
1. Get into your vehicle and place the navigation device into its cradle.
2. Tap on the
(Vehicle reached) button.
The navigation system will now guide you to the destination of the next
stage in the mode corresponding to the selected route profile.
Useful functions
- 75 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Skip current destination
After reaching your destination you walked back to your car without the
help of the navigation system. Now you want to drive on to the
destination of the next stage.
1. Get into your vehicle and place the navigation device into its cradle.
2. Tap on the
(Destination reached) button.
The OPTIONS window opens.
3. Tap on Skip current destination.
The navigation system will now guide you to the destination of the next
stage in the mode corresponding to the selected route profile.
Note: You can also use the Skip current destination function when you
want to continue the journey with a different vehicle.
9.4
MyBest POI: POI on Your Route
Note: This function is available only during navigation in Vehicle mode
(see "Navigation in Vehicle mode" on page 59).
You can stipulate 3 categories of POI for the POI on Your Route
function. POIs which lie along your route and match one of these
categories can be quickly displayed and selected as an interim
destination during the navigation.
9.4.1
Displaying POIs along the route
1. Tap on the
(POI on Your Route) button which appears at the
top left of the map (see point 2 in "Navigation in Vehicle mode" on
page 59).
The POI on Your Route bar opens.
It shows symbols of the 3 stipulated categories of POI. The distance
to the nearest POI in each category is indicated. The small orange
triangle alongside the route indicates in addition whether the POI
lies on the right ( ) or on the left ( ) in driving direction.
Note: The POI on Your Route bar closes after a few seconds.
If you want the bar to remain open, tap on the
button changes to
- 76 -
(Fix) button. The
(Fixed).
Useful functions
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
2. Tap on one of the categories in order to show a list with more POIs
in this category.
The POI ON YOUR ROUTE list opens.
1
Symbols of those categories in which POIs are available are shown at
the right edge of the screen. The symbol of the currently selected
category is highlighted.
►
Tap on the symbol of the category whose POIs you want to have
displayed.
2
The list contains the next 5 POIs, sorted by distance (beeline), which lie
along your route and are in the stipulated category.
3
4
At the left edge of the screen a small orange triangle indicates whether
the respective destination is on the right ( ) or on the left ( ) in
driving direction.
(Only NAVIGON 92 Premium): When the Voice Command function is
activated, you can also use voice commands to start the navigation to
one of the POIs. However, the Voice Command function is not
available in every language.
5
Additional information about each POI in the list can be displayed.
►
9.4.2
Tap on the
(Information) button on the right alongside the
corresponding POI (refer also to "Information about the destination"
on page 38).
Navigating to one of the destinations
►
Tap in the list on the destination to which you want to navigate.
The selected destination will be inserted as an interim destination.
The system recalculates the route. Navigation to the original
destination will be continued after reaching the interim destination.
Useful functions
- 77 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
9.4.3
Selecting categories
You can stipulate which 3 categories or sub-categories are to be
available for the POIs along the route.
1. Open the POI ON YOUR ROUTE list.
2. In the POI ON YOUR ROUTE list tap on
Categories.
(More) > Specify
The SETTINGS: POI ON YOUR ROUTE window opens.
3. Tap on the
(List) button alongside the category you want.
A list of all the available POI categories opens.
4. Select a category.
If any sub-categories exist for a category, the
be shown again alongside it.
►
►
(List) button will
Tap on it to show and, if required, to change the sub-categories.
All the sub-categories of a category are selected as standard.
Select the required sub-categories and tap on OK. You can
quickly deactivate or activate all the sub-categories by tapping
on the top entry All Categories in the list.
5. Tap on OK to close the list of categories.
The SETTINGS: POI ON YOUR ROUTE window opens.
6. Tap on OK.
7. The POI ON YOUR ROUTE list opens. If there are POIs of the newly
selected category along the route, they will already appear in the
list.
8. Tap on
(Back) in order to close the list.
The map opens.
9.5
GPS Status, saving the current location
In the GPS STATUS window you will find an overview of the data the
navigation system calculates from the GPS signals it receives.
►
In the button bar tap on
Status.
(Navigation Options) > GPS
On the left side you will see a map section with your current position
shown at the centre. When you move, the map section will change
in accordance with your current position.
On the right side you will see the address data of your current
position and the data of your current GPS status. The GPS data are
updated continuously but the address data are those of your
position when the window was opened.
- 78 -
Useful functions
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Save Position
The current location can be saved in the FAVOURITES list.
1. In the GPS STATUS window tap on Save Position.
The NAME OF THE DESTINATION window opens.
2. Enter a name for the destination.
3. Tap on Save.
9.6
Block
You can block a leg of the route at any time during a navigation, i.e. to
re-calculate the route in order to avoid the leg, e.g. if you have heard on
the radio of a traffic jam affecting this section.
Note: The block is valid only for the current navigation. It no longer
exists on a new navigation.
You are currently in a navigation. The map is open in Navigation mode.
1. In the button bar tap on
(Navigation Options) > Block.
The BLOCK window opens. It contains buttons with different
distance values.
2. Select the distance you want to block.
Note: If you are currently driving on a motorway, the alternative route
will begin at the next exit. Indicated on the buttons is the junction up to
which the block extends.
The system recalculates the route. The blocked route section will be
avoided. It is marked on the map in red.
Unblocking a route section
►
In the button bar tap on
Unblock.
(Navigation Options) >
The block will be lifted and the route recalculated.
9.7
TMC (Traffic Information)
The integrated TMC receiver enables the navigation system to make
use of current traffic messaging. If necessary it can change your route
dynamically, for example in order to avoid a traffic jam.
Note: TMC is available free of charge in many European countries.
PremiumTMC, promising a faster and more up-to-date service, is
offered (exclusively or in addition) in some countries at a charge.
You can subscribe to PremiumTMC services on our website
www.navigon.com.
Useful functions
- 79 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
You can select whether you want route optimisation to be performed
Automatic, On Request or Never. This setting also has an effect on the
presentation of traffic messages.
9.7.1
Route Optimisation: On Request
If a new traffic message concerning your route is reported during
navigation, the Traffic Obstruction box will be phased in at the top
edge of the screen.
It presents a clear overview of all the important information concerning
the reported traffic obstruction. At bottom right you can see how many
messages concern your route and which of these messages is currently
being presented.
►
Tap on the Traffic Obstruction box to show the next message.
►
Tap on
(Close) to phase out the box.
At the same time the Traffic Information button appears. It indicates the
distance to the next reported traffic incident and the time loss likely due
to this incident. The time loss is also represented by the colour of the
button.
(Red):Major time loss (more than 20 minutes).
(Yellow): Moderate time loss (5-20 minutes).
(No colour): Minor time loss (less than 5 minutes).
Note: You can configure whether to show only traffic obstructions with
more than 20 minutes time loss or also obstructions with less time loss
(see "Settings (Traffic Information)" under "Announce Traffic Events" on
page 88).
►
Tap on
(Traffic Information).
The TRAFFIC OBSTRUCTION window opens.
- 80 -
Useful functions
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
The window shows a map section with the route section affected by the
message and with the optimised route which avoids the reported traffic
obstruction. Information about the optimised route (time saving, length
of the detour, time of arrival) is provided in addition.
►
Tap on Yes to continue your journey on the optimised route.
►
Tap on No to continue your journey on the current route.
►
►
Tap on Details to open the TRAFFIC window (see "Displaying traffic
information" on page 83).
Tap on
screen.
(Show on Map) to stretch the map over the complete
In the map view tap on
OBSTRUCTION window again.
(Back) to open the TRAFFIC
Note: The TRAFFIC OBSTRUCTION window also opens when navigation
starts and traffic messages already exist for the route.
Cancelling a traffic message
It can happen that a traffic message, for which a detour has already
been calculated, no longer exists because the traffic jam has cleared or
because there is no longer a section block.
In this case the navigation system checks whether it is worth returning
to the original route. If it is, the
will appear.
►
Useful functions
(Traffic incident cleared) button
Tap on
(Traffic incident cleared) to open the TRAFFIC
OBSTRUCTION window (see above). You can then decide whether
you want to return to the original route (Yes) or not (No).
- 81 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
If you do not tap on
(Traffic incident cleared, you will be
returned automatically to the original route after about 15 seconds.
9.7.2
Route Optimisation: Automatic
If a new traffic message concerning your route is reported during
navigation, the traffic obstruction will be avoided automatically if this can
justifiably shorten the trip. If not, the traffic information will be ignored.
If a detour has been calculated, the Traffic Obstruction box will be
phased in at the top edge of the screen.
It presents a clear overview of all the important information concerning
the reported traffic obstruction. At bottom right you can see how many
messages will lead to a change of route and which of these messages
is currently being presented. The (Detour) symbol indicates that this
traffic obstruction is being avoided.
►
Tap on the Traffic Obstruction box to show the next message.
►
Tap on
(Close) to phase out the box.
As long as there are traffic messages concerning your route, the
(Traffic Information) button is shown. It indicates that the
route is being automatically optimised by the navigation system.
►
Tap on
(Traffic Information).
The following message appears:
►
►
- 82 -
Tap on OK to close the message..
Tap on Details to open the TRAFFIC window (see "Displaying traffic
information" on page 83).
Useful functions
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
9.7.3
Displaying traffic information
You can have the currently available traffic messages displayed at any
time.
►
In the button bar tap on
(Navigation Options) > Traffic.
The TRAFFIC window opens.
You can use the
of messages.
►
1
Tap on
(Up) and
(Down) buttons to scroll in the list
(Back) in order to close the TRAFFIC window again.
The Filter filter shows how many traffic messages there are altogether,
what type of traffic message is listed, and how many messages of this
type there are.
►
Tap on the Filter button to select the messages you want displayed
(see "Filtering traffic messages" on page 84).
2
When a new traffic obstruction affecting your route is reported, it is
marked with 'NEW'.
3
This mark indicates that the message in question comes from a
PremiumTMC provider.
A similar mark also appears when the particular message comes from
the NAVIGON Live services (
).
4
Here you can see how serious the obstruction is:
Red: The affected section of the route is fully blocked by the obstruction
or involves a considerable loss of time (more than 20 minutes) to pass
through. This can be the case for example when several lanes are
blocked due to an accident.
Useful functions
- 83 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Yellow: The section is not fully blocked by the obstruction but there is a
threat of delays (5-20 minutes). This can be the case for example with
slow-moving traffic.
No colour: The obstruction is not classified as serious (time loss of less
than 5 minutes). This can be the case for example when slow-moving
traffic is reported on a very short section, when SOS telephones are not
working or when parking areas are blocked off.
5
Here you can see how far you are from this obstruction. If the
obstruction does not lie on your route or if a detour route was already
calculated for this obstruction, then the distance as the crow flies will be
shown.
6
Here you can see in which country and on which road the obstruction
lies.
Note: Most radio stations report only traffic obstructions in their own
country.
7
Here the reported obstruction is displayed as a traffic sign.
8
Here you can see on which section of the road the obstruction lies.
9
The navigation system can either Detour (
) or Ignore°(
)
obstructions along the route. The symbol indicates the respective
status.
Note: If you have activated edit mode, you can tap on the button to
select the alternative setting (see "Edit Mode" on page 86).
10
9.7.4
Tap on the
messages.
(Refresh) button to search for changed or new traffic
Filtering traffic messages
You can select which traffic messages you want to see.
►
In the TRAFFIC window tap on the Filter button (see "Displaying
traffic information", page 83, point 1).
A distinction is drawn between the following types of traffic message:
►
►
►
- 84 -
On Route: When you are navigating, only those traffic messages
are shown which concern your route.
Nearby: All the traffic messages near your current location are
listed. If GPS reception is not good enough but the navigation
system has saved your last position, all the messages near this
position will be indicated.
Regional information: The listed traffic messages concern not only
certain route sections, e.g. if a major event causes traffic
obstructions throughout a large town or if there is dense fog
throughout a certain region.
Useful functions
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
►
All traffic information: The ALL TRAFFIC INFORMATION list is opened.
In it all the active messages are sorted by country (in ascending
order, e.g. 'D'), by road type (according to importance, e.g.
motorway) and by road name (in ascending order, e.g. 'A6'). How
many messages exist for the respective road is also indicated.
►
9.7.5
Tap on an entry to list all the traffic obstructions reported for the
road concerned (e.g. A6).
Showing a single message in detail
►
In the TRAFFIC window tap on an individual message.
The TRAFFIC INFO window opens.
The affected route section is presented in the left half of the
window. The distance, the length of the obstruction and the
anticipated time loss are indicated.
The content of the message is shown in the right half.
The navigation system announces the traffic message in question if the
detail view is open. Reading out text messages is not possible in all
languages however.
Note: You can configure the reading out function. In the TRAFFIC
window tap on
(More) > Settings > Read out traffic information
and select whether you want TMC messages to be read out or not (Yes
or No).
►
Useful functions
Tap on
section.
(Map detail) to view the affected section as a map
- 85 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
►
In the map section tap on
section again.
(Information) to close the map
- or Tap on
the map.
9.7.6
(Show on Map) to show the affected route section on
Edit Mode
For each message you can select whether to use the detour or not.
Note: Edit mode can be activated under the following conditions only:
►
The Route Optimisation setting is at On Request.
►
You are currently in a navigation.
Note: Intervening manually in the calculation of detours can have
undesirable consequences:
►
The travelling distance may be longer than necessary
►
The travelling time may be longer than necessary
1. Open the TRAFFIC window (see "Displaying traffic information" on
page 83).
2. In the TRAFFIC window tap on
(More) > Edit Mode.
3. Tap on Yes.
The TRAFFIC window opens again.
In addition to traffic obstructions along the route you will see a
button which indicates the current status:
(Detour): An alternative route avoiding the traffic obstruction is
calculated.
(Ignore): This obstruction is ignored.
►
Tap on the button to select the alternative setting.
►
Tap on
(Back).
On this basis the navigation system calculates an 'Alternative
Route' and shows it in the TRAFFIC OBSTRUCTION window. You
can then decide whether you want to use this route (Yes or No).
9.7.7
Options (Traffic Information)
1. Open the TRAFFIC window (see "Displaying traffic information" on
page 83).
2. In the TRAFFIC window tap on
- 86 -
(More).
Useful functions
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
A window with several buttons opens.
3. Tap on the button with the function you want to perform.
Settings: Tap on the button to open the SETTINGS window (see "Settings (Traffic
Information)" on page 87).
Automatic Mode: This function is available only when edit mode is activated.
Tap on the button to deactivate edit mode. All the traffic messages
along the route will then be set to the status 'New'. On this basis the
navigation system will calculate an 'Optimised Route' and will assigne to
each traffic message the status which results from the calculation
(Detour or Ignore).
Ignore All: (available only when edit mode is activated): Sets all the traffic
messages along the route to the status Ignore.
Detour All: (available only when edit mode is activated): Sets all the traffic
messages along the route to the status Detour.
Calculate Optimised Route: (available only when edit mode is activated): Sets
all the traffic messages along the route to the status 'New'. On this
basis the navigation system will calculate an 'Optimised Route' and will
assign to each traffic message the status which results from the
calculation (Detour or Ignore).
Info:
9.7.8
Opens a window which gives you possible reasons for poor TMC
reception.
Settings (Traffic Information)
1. Open the TRAFFIC window (see "Displaying traffic information" on
page 83).
2. in the TRAFFIC window tap on
(More) > Settings.
In the SETTINGS window you can make the following settings:
Route Optimisation
Here you can configure whether and how you want the reception of
traffic messages to affect the navigation.
►
►
►
Useful functions
Automatic: An alternative route will be calculated automatically. The
system will inform you on the recalculation.
On Request: An announcement from the navigation device tells you
that a traffic message concerns your route. On the screen the
Traffic Information box indicates the distance to the reported traffic
obstruction.
Never: All the traffic messages along your route are ignored.
- 87 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Announce Traffic Events
This setting is available only when the On Request option is selected for
the Route Optimisation setting. Here you can configure whether traffic
messages are indicated only if they are likely to result in a certain time
loss.
►
Only for time loss > 5 min.
►
Only for time loss > 15 min.
►
Show All
Read out traffic information
Here you can configure whether you want TMC messages to be read
out when the TRAFFIC INFO window is opened (Yes or No).
10
Handsfree Module
This chapter is relevant for you only if your navigation device is a
NAVIGON 92 Premium | 92 Premium Live.
The navigation device has a hands-free module which supports
Bluetooth connections to Bluetooth-capable mobile phones and
headsets. It can be connected simultaneously to up to two mobile
phones or to a headset.
If you have set up a connection to a mobile phone, you can use the
navigation device as a hands-free module for it.
If you have set up a connection to a Bluetooth headset, you will hear
the voice instructions from the navigation software via the headset. This
is useful for example when travelling on a motorcycle. All other
functions described in this chapter are not available when connected to
a headset.
Not all Bluetooth-capable devices are 100% compatible. Depending on
the device, some functions may not be supported at all or only with
limitations. It may happen that a device cannot be connected when a
certain other device is already connected.
Opening the hands-free module
►
►
When the map is open, tap on any point of the map to open the
button bar.
In the button bar tap on
(Phone).
The HANDSFREE MODULE window opens.
When you start the hands-free module for the first time, a window will
open in which you can start a search for Bluetooth-capable devices.
- 88 -
Handsfree Module
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
►
►
Tap on Yes if you want to start the search now and set up a
connection to a headset or a mobile phone. As soon as the
navigation device has found your Bluetooth device you can initiate
the pairing (see "Pairing with a device" on page 91).
Tap on No if you want to initiate the connection later (see chapter
"Searching for and pairing Bluetooth devices" on page 90).
Elements of the hands-free module
All functions can be reached from the HANDSFREE MODULE window.
1
2
Status display of the hands-free module. This status display is also
visible in many other windows (see "Bluetooth / Phone" on page 23).
Opens the OPTIONS window. There you can
►
edit the system settings, see page 118.
►
edit the Bluetooth settings, see page 104.
►
view the text message (SMS) mailbox, see page 98.
►
edit the Speed Call button, see page 103.
3
Opens the TRUSTED DEVICES window. Here you can enter which
devices are connected to the hands-free module (see "Connecting to a
device" on page 93).
4
The Phone 1 and Phone 2 buttons are used to select the active phone
(see "Activating a mobile phone" on page 94).
The button of the currently active phone is marked in colour (here:
Phone 1). The name of the active phone is shown to the right of the
buttons.
These buttons can have various colours:
►
Green if a mobile phone is connected as "Phone 1" or as "Phone 2".
►
Orange if no mobile phone is connected.
Handsfree Module
- 89 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
If the hands-free module is connected to a headset, the
(Headset) button will appear.
5
Speed call buttons (see "Preset" on page 103).
6
Button bar. Allows you to switch to other windows, see page 17.
The following labelled buttons are also visible:
Keyboard: Opens the keypad on which you can dial phone numbers (see
"Dialling a telephone number" on page 98).
Phone Book: Opens the phone book of the active telephone (see "Calling a
contact from the phone book" on page 99 and "Navigating to a contact
from the phone book" on page 101).
Recent Calls: Opens the recent calls of the active telephone (see "Calling most
recently dialled, received or missed numbers" on page 99).
10.1
Bluetooth Connection
To be able to use the hands-free module of the navigation device, it
must be connected to at least one Bluetooth device.
Note: Both the navigation device and the mobile phone must be
configured accordingly in order for a Bluetooth connection to be set up
between the two devices. Headsets are suitably configured at the
factory.
For details of how to configure the navigation device refer to the chapter
"Settings" on page 104.
For details of how to configure the mobile phone or headset refer to the
related manual issued by the manufacturer.
10.1.1
Searching for and pairing Bluetooth devices
Pairing is the term used for setting up a coded connection between two
Bluetooth devices. This requires each of the two devices to send the
same password to respectively the other device. The password and the
connection data are saved on both devices, which means that pairing is
necessary once only when the connection is set up for the first time.
Paired devices are saved in the TRUSTED DEVICES list.
The navigation device can connect automatically to the last connected
device as soon as it is within range.
The hands-free module of the navigation device can save and manage
the connection data of up to 4 paired mobile phones and one headset.
From each paired mobile phone it is possible to import the phone book
and recent calls and to save this information with the connection data.
- 90 -
Handsfree Module
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Note: In this case the phone book and recent calls are only available
when the phone in question is connected. For details of how to import
the phone book and recent calls refer to the chapters "Import Phone
Book" on page 96 and "Import recent calls" on page 97.
Searching for devices
1. Make sure that Bluetooth is activated on your navigation device.
(See "Configuring the hands-free function" on page 103)
►
If you want to set up a connection to a mobile phone, make sure
that Bluetooth is activated on the mobile phone and that the
Discoverable by Others and Others May Connect settings are
activated.
Note: The exact designation of these settings may vary from
manufacturer to manufacturer. For details please refer to the manual
issued for your mobile phone.
►
If you want to set up a connection to a headset, make sure that it is
switched on.
2. In the HANDSFREE MODULE window tap on
(Trusted Devices).
The TRUSTED DEVICES window opens.
3. Tap on Search for Devices.
The navigation device starts the search for Bluetooth devices and
lists all the devices it recognises in the DISCOVERED DEVICES
window. The symbol to the left of the device name indicates
whether the device is a mobile phone or a headset.
Note: With some devices, the device names are not indicated until the
search is completed.
Pairing with a device
4. Tap in the DISCOVERED DEVICES window on the name of the device
you want to connect to.
►
If pairings already exist with 4 mobile phones or with a headset,
you will now be prompted to delete a device from the TRUSTED
DEVICES list (see "Deleting devices" on page 95).
5. The navigation device prompts you to enter a password.
►
Handsfree Module
If you are setting up a connection to a mobile phone, enter a
password (1–16 digits, depending on the device to be
connected) in the Key box and tap on OK. Then enter the same
password on the mobile phone.
- 91 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
►
If you are setting up a connection to a headset, enter the
headset password. This password and additional information
about pairing can be found in the manual issued for the
headset.
The pairing is performed and a connection is set up between the
two devices. The connected device is indicated in the TRUSTED
DEVICES list.
►
►
10.1.2
If the new device is a headset, the symbol will appear to the
right of its name in green colour. The connection to any mobile
phones will be disconnected if applicable.
If the new device is a mobile phone, one of the two symbols will
appear to the right of its name in green colour depending on
whether it is connected as Phone 1 or as Phone 2.
Pairing from the mobile phone
Note: Please consult the mobile phone's manual if you are uncertain
about how to carry out the following steps on the mobile phone.
1. Make sure that the Bluetooth function is activated on both the
mobile phone and the navigation device. To perform the pairing
from the mobile phone, the functions Discoverable by Others and
Others May Connect must also be activated on the navigation
device (see "Configuring the hands-free function" on page 103).
2. Using your mobile phone, search for other Bluetooth devices.
The navigation device is detected as NAVIGON.
3. Initiate a connection to the detected NAVIGON device.
The mobile phone prompts you to enter a password.
4. Enter a password (1-16 digits).
The navigation device prompts you to enter a password.
5. Enter the same password in the Key box as on the mobile phone
and tap on OK.
The pairing is performed and a connection is set up between the
two devices. The connected device is indicated in the TRUSTED
DEVICES list.
►
►
- 92 -
If the new device is a headset, the symbol will appear to the
right of its name in green colour. The connection to any mobile
phones will be disconnected if applicable.
If the new device is a mobile phone, one of the two symbols will
appear to the right of its name in green colour depending on
whether it is connected as Phone 1 or as Phone 2.
Handsfree Module
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
10.1.3
Connecting to a device
In this case "connection" refers to any subsequent connections between
Bluetooth devices which have already been paired. No further password
entry is necessary when connecting.
1. Make sure that Bluetooth is activated on your navigation device.
(See "Configuring the hands-free function" on page 103)
►
If you want to set up a connection to a mobile phone, make sure
that Bluetooth is activated on the mobile phone and that the Others
May Connect setting is activated.
Note: The exact designation of this setting may vary from manufacturer
to manufacturer. For details please refer to the manual issued for your
mobile phone.
►
If you want to set up a connection to a headset, make sure that it is
switched on.
1. Make sure that Bluetooth is activated on your navigation device.
►
If you want to connect to a mobile phone, make sure that Bluetooth
is activated on the mobile phone and that the Discoverable by
Others and Others May Connect settings are activated.
Note: The exact designation of these settings may vary from
manufacturer to manufacturer. For details please refer to the manual
issued for your mobile phone.
►
If you want to connect to a headset, make sure that the headset is
switched on.
Connecting manually
If a Bluetooth connection to a device is active, you must disconnect this
connection first before you can connect to a different device. The
existing connection is disconnected automatically as soon as the
connection to a different device is initiated.
2. In the HANDSFREE MODULE window tap on
(Trusted Devices).
The TRUSTED DEVICES window opens. Currently connected devices
are marked with a green symbol to the right of their name. Devices
which are not connected have white symbols.
3. Please ensure that the Bluetooth connection is working properly.
►
Handsfree Module
Tap on the
(Connect) symbol in order to initiate a
connection to the corresponding headset. All active connections
to other devices will then be disconnected.
- 93 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
►
►
Tap on the
(Connect) symbol to connect the corresponding
mobile phone as "Phone 1". The connection to a headset or to
a device which is already connected as Phone 1 will be
disconnected.
Tap on the
(Connect) symbol to connect the corresponding
mobile phone as "Phone 2". The connection to a headset or to
a device which is already connected as Phone 2 will be
disconnected.
The corresponding symbol will turn green. The navigation device
connects to the selected device.
4. Tap on OK to return to the HANDSFREE MODULE window.
If the telephone to which you want to connect the hands-free module is
not in the list, you can start a search for Bluetooth devices (see
"Searching for and pairing Bluetooth devices" on page 90).
Connecting automatically
Note: For automatic connection to be possible, the navigation device
must be saved in the Bluetooth settings on your mobile phone as
"authorised" or "authorised device" (the exact wording can vary from
manufacturer to manufacturer). For details please refer to the manual
issued for your mobile phone.
If the device you want to connect to was either of the two last connected
devices and the Reconnect Automatically setting is activated, the
connection will be set up automatically as soon as the device is within
range (see "Configuring the hands-free function" on page 103).
10.1.4
Activating a mobile phone
If the hands-free module is connected to two mobile phones, you can
select in the HANDSFREE MODULE window which is to be the active
telephone.
If you want to call someone, the call will be made via the active phone.
Incoming calls and text messages on the inactive telephone will be
announced however and can be taken.
Recent calls and the phone book of the inactive telephone are not
available.
You can activate only one connected telephone.
►
- 94 -
Tap on the
(Phone 1) or
the corresponding mobile phone.
(Phone 2) button to activate
Handsfree Module
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Note: If no mobile phone is connected yet as Phone 1 or as Phone 2,
the TRUSTED DEVICES window will open. There you can connect a
mobile phone to the hands-free module. (See"Bluetooth Connection" on
page 90)
The button of the currently active phone is marked in colour. The
name of the active phone is shown to the right of the buttons.
10.1.5
Deleting devices
Deleting a single device
You can delete the connection data of paired devices. The device is
then no longer shown in the TRUSTED DEVICES list. If you imported the
phone book or recent calls from this device, these data will be deleted
from the navigation device.
1. In the HANDSFREE MODULE window tap on
(Trusted Devices).
The TRUSTED DEVICES list opens.
2. Tap on
(More) > Edit trusted devices.
The EDIT TRUSTED DEVICES window opens.
3. Tap on the
(Delete Device) button to the right of the device you
want to delete.
You will be requested to confirm deletion.
4. Tap on Yes.
The device is deleted from the list.
5. Tap on OK.
The TRUSTED DEVICES list appears again.
6. Tap on OK.
Deleting all the devices
You can delete the connection data of all the paired devices. The
TRUSTED DEVICES list is then empty.
1. In the HANDSFREE MODULE window tap on
(Trusted Devices).
The TRUSTED DEVICES list opens.
2. Tap on
(More) > Delete All.
You will be requested to confirm deletion.
3. Tap on Yes.
The TRUSTED DEVICES list appears again. It is empty
4. Tap on OK.
Handsfree Module
- 95 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
10.1.6
Import Phone Book
For each paired mobile phone in the TRUSTED DEVICES list it is also
possible to import its phone book and save it together with the
connection data. However, only the phone book of the active mobile
phone can be accessed. As soon as you activate a different phone or
disconnect the Bluetooth connection, the phone book will no longer be
available on the hands-free module.
1. In the HANDSFREE MODULE window activate the mobile phone
whose phone book you want to import (see "Activating a mobile
phone" on page 94).
2. Tap on Phone Book.
The phone book import is started. Depending on the size of the
phone book this can take some time. When the import is completed,
a corresponding message window appears.
3. Tap on OK.
The HANDSFREE MODULE window opens again.
Note: The number of phone book entries that can be imported from the
mobile phone is limited to 1000.
Note: It can take some time to import a phone book depending on its
size. During the import you can move the Bluetooth application into the
background in order e.g. to show the map during navigation. In the
button bar tap on the corresponding button.
Editing and updating a phone book
The phone book cannot be edited in the hands-free module. If you want
to change or delete an entry in the phone book, you must make the
changes on your mobile phone and then update the phone book on the
hands-free module. The phone book is re-imported for the update.
1. In the HANDSFREE MODULE window activate the mobile phone
whose phone book you want to update (see "Activating a mobile
phone" on page 94).
2. Tap in the HANDSFREE MODULE window on the Phone Book button.
The phone book of the active phone is opened.
3. Tap on
(More) > Refresh.
The phone book is re-imported. Depending on the size of the phone
book this can take some time. When the import is completed, a
corresponding message window appears.
4. Tap on OK.
The HANDSFREE MODULE window opens again.
- 96 -
Handsfree Module
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Note: Deleting the complete phone book is possible only by deleting the
mobile phone from the TRUSTED DEVICES list (see to "Deleting devices"
on page 95). In this case all the connection data, the phone book and
the recent calls will be deleted. Afterwards you will have to repeat the
pairing routine in order to set up a connection with the device.
For more details about the phone book refer to the chapter "Calling a
contact from the phone book" on page 99.
10.1.7
Import recent calls
For each paired mobile phone in the TRUSTED DEVICES list it is also
possible to import its recent calls and save them together with the
connection data. However, only the recent calls of the active mobile
phone can be accessed. As soon as you activate a different phone or
disconnect the Bluetooth connection, the recent calls will no longer be
available on the hands-free module.
Note: The number of recent calls that can be imported from the mobile
phone is limited to 30.
1. In the HANDSFREE MODULE window activate the mobile phone
whose recent calls you want to import (see "Activating a mobile
phone" on page 94).
2. Tap in the HANDSFREE MODULE window on the Recent Calls button.
The recent calls import is started. When the import is completed,
the RECENT CALLS list is shown.
3. Tap on
(Back).
The HANDSFREE MODULE window opens again.
For more details about the recent calls refer to the chapter "Calling most
recently dialled, received or missed numbers" on page 99.
10.2
Taking a call
When you receive a call, a ring tone will sound and the INCOMING CALL
window will open. The header line shows which connected phone is
receiving the call.
The name and the number of the caller will be displayed if this
information is available. (If the caller's number is displayed but does not
exist in the phone book, Unknown caller will be displayed instead of
the name. If the number is suppressed, Anonymous will be displayed.)
►
Tap on Accept if you want to take the call.
The CALL IN PROGRESS window opens.
►
Tap on Reject if you do not want to take the call.
Handsfree Module
- 97 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Note: Navigation instructions are muted during a call. However, you
can move the Bluetooth application into the background in order e.g. to
show the map during navigation (see "Moving the map to the
foreground" on page 100).
10.3
Receiving a text message
The hands-free module can show incoming text messages (SMS).
When you receive a text message (SMS), a signal tone will sound and
the INCOMING TEXT MESSAGE window will open. The header line shows
which connected telephone received the text message.
The name and the number of the sender will be displayed if this
information is available. (If the sender's number is not saved in the
phone book, Unknown will be displayed instead of the name.)
►
Tap on Read if you want to read the text message now.
The TEXT window opens. You can then read the text message.
Note: You can configure the navigation system so that it reads out the
text of the message as soon as the TEXT window is opened (see
"Settings" on page 104). Reading out text messages is not possible in
all languages however.
►
Tap on Cancel if you want to read the message later.
Note: You can also choose not to have incoming text messages read
out immediately (see "Settings" on page 104).
You can however open the list of received text messages at any time to
check whether you have received any new text messages (see
"Opening the mailbox" on page 102).
10.4
Making a call
With the hands-free module you can make a call in various ways:
10.4.1
Dialling a telephone number
1. In the HANDSFREE MODULE window activate the mobile phone which
you want to use to make the call (see "Activating a mobile phone"
on page 94).
2. Tap in the HANDSFREE MODULE window on the Keyboard button.
The TELEPHONE NUMBER window opens.
3. Enter the desired telephone number.
4. Tap on the Call button.
- 98 -
Handsfree Module
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
10.4.2
Dialling a Speed Call number
A total of 4 Speed Call buttons are available. These buttons can be
configured separately for each paired mobile phone.
1. In the HANDSFREE MODULE window activate the mobile phone which
you want to use to make the call (see "Activating a mobile phone"
on page 94).
2. Tap in the HANDSFREE MODULE window on the corresponding
Speed Call button.
Note: If the selected Speed Call button has not been configured yet, it
will be labelled with just three dots (…). If you tap on the symbol, the
MODIFY PRESET window will open (see "Preset" on page 103).
10.4.3
Calling a contact from the phone book
You can select numbers from the phone book of the active telephone.
1. In the HANDSFREE MODULE window activate the mobile phone which
you want to use to make the call (see "Activating a mobile phone"
on page 94).
2. In the HANDSFREE MODULE window tap on Phone Book.
►
If the phone book of the active phone was not yet imported, the
import will be started now (see "Import Phone Book" on
page 96). Then tap again on Phone Book if necessary.
3. Select from the phone book the contact you want to call.
The SELECTED PHONE BOOK ENTRY window opens. It shows on two
different pages all the phone numbers and addresses which have
been saved for the selected contact.
►
If necesary, tap on
(Numbers) to view the phone numbers.
4. Tap on the phone number you want to dial.
10.4.4
Calling most recently dialled, received or missed numbers
The RECENT CALLS list contains outgoing, received and unanswered
calls on the active telephone.
The calls are sorted on three pages which you can open via the
symbols on the left edge of the screen.
Outgoing calls
Incoming calls
Missed calls
The symbol of the current page is highlighted in colour.
Handsfree Module
- 99 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Note: Incoming and unanswered calls can be dialled only if the caller's
number was transmitted.
1. In the HANDSFREE MODULE window tap on Recent Calls.
If the recent calls on the active phone were not yet imported, the
import will be started now (see "Import recent calls" on page 97).
The RECENT CALLS list opens.
2. Tap on the symbol of the calls which you want to view (Missed
calls, Incoming calls, Outgoing calls).
The calls are listed.
3. Tap on the phone number you want to dial.
Note: Only the recent calls of the active mobile phone can be
accessed. As soon as you activate a different phone or disconnect the
Bluetooth connection, the recent calls will no longer be available on the
hands-free module.
10.4.5
Transferring a call from your mobile telephone
The navigation device takes calls automatically from the mobile phone
as soon as a Bluetooth connection is established between the two
devices.
10.5
During a call
You are calling using the hands-free module. The CALL IN PROGRESS
window is open.
10.5.1
Go back to entering a destination
If you were in the process of entering a destination, you can switch back
to it again during the call.
►
At the upper edge of the screen tap on
►
If you want to open the CALL IN PROGRESS window again before the
navigation starts, tap on
screen.
10.5.2
(Destination).
(Phone) at the top edge of the
Moving the map to the foreground
In this way you move the map with the navigation instructions to the
foreground during a call when the navigation device is in the process of
navigating.
►
In the button bar at the bottom edge of the screen tap on
(Navigation).
- 100 -
Handsfree Module
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
While a call is in progress, the
(Call in Progress) symbol is visible at
the top edge of the screen. The number indicates which of the
connected phones is being used to make the call (here: "Phone 1").
►
10.5.3
Tap on any point of the map and then on
open the CALL IN PROGRESS window.
(Phone) to
Entering numbers
You can enter numbers during a call. This may be the case, for
example, if a further connection via a telephone system is necessary.
1. Tap on Keyboard.
2. Enter the desired numbers.
3. Tap on
window.
10.5.4
(Back) in order to open the CALL IN PROGRESS
Muting the microphone
During the call, you can mute the microphone so that you can talk to
someone without the interlocutor hearing.
►
In the CALL IN PROGRESS window tap on Mute Microphone to switch
off the microphone.
The person on the other end of the line can no longer hear you.
►
10.5.5
Tap on Unmute Microphone to switch the microphone on again.
Transferring a call to the mobile phone
►
In the CALL IN PROGRESS window tap on Use Mobile Phone.
You can now continue the call from your mobile phone.
10.5.6
Ending the call
►
Tap in the CALL IN PROGRESS window on the Hang up button in
order to end the call.
10.6
Useful functions
10.6.1
Navigating to a contact from the phone book
You can also use the address of a contact in the phone book of the
active telephone as a destination for the navigation system.
1. In the HANDSFREE MODULE window activate the mobile phone
whose phone book contains the contact to which you want to
navigate (see "Activating a mobile phone" on page 94).
2. In the HANDSFREE MODULE window tap on Phone Book.
Handsfree Module
- 101 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
►
If the phone book of the active phone was not yet imported, the
import will be started now (see "Import Phone Book" on
page 96).
3. Select from the phone book the contact you want to call.
The SELECTED PHONE BOOK ENTRY window opens. It shows on two
different pages all the phone numbers and addresses which have
been saved for the selected contact.
►
If necesary, tap on
(Addresses) to view the addresses.
4. Tap on the address to which you want to navigate.
You can also select addresses from the phone book in the navigation
software to act as destinations. For more details refer to the chapter
"From the phone book" on page 40.
10.6.2
Opening the mailbox
You can read text messages from the mailbox of the active telephone.
Note: A maximum 15 text messages (SMS) can be imported from the
mailbox of the mobile phone.
1. in the HANDSFREE MODULE window tap on
Inbox.
(More) > Text
The TEXT INBOX list opens. The entries are sorted in chronological
order. The symbol to the right of each entry indicates whether the
text message has been opened at least once:
Unopened text message
Opened text message
2. Tap on the entry you want.
The READ TEXT window opens. You can then read the text
message.
►
Tap on Call if you want to call the sender of the text message
(SMS).
Note: You can configure the navigation system so that it reads out the
text of the message as soon as the TEXT window is opened (see
"Settings" on page 104). Reading out text messages is not possible in
all languages however.
Note: Only the mailbox of the active mobile phone can be accessed. As
soon as you activate a different phone or disconnect the Bluetooth
connection, the mailbox will no longer be available on the hands-free
module.
- 102 -
Handsfree Module
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
10.7
Configuring the hands-free function
The hands-free module contains a number of settings that can be
individually configured.
10.7.1
Preset
The hands-free module of the navigation device contains four Speed
Call buttons that can be individually configured. The assignment of the
Speed Call buttons is separately defined for each paired phone and
saved with the phone's data. The Speed Call buttons for the active
phone are available in each case.
1. In the HANDSFREE MODULE window activate the mobile phone
whose Speed Call settings you want to edit (see "Activating a
mobile phone" on page 94).
2. In the HANDSFREE MODULE window tap on
Preset.
The MODIFY PRESET window opens.
(More) > Modify
Entering a new Speed Call number or editing an existing Speed Call
number
3. Tap on the
(Edit) button.
The NAME window opens.
4. Enter the name for the selected Speed Call button or edit the
existing name.
5. Tap on Next.
The TELEPHONE NUMBER window opens.
6. Enter the phone number or change it.
7. Tap on Save.
The MODIFY PRESET window opens again. The new configuration is
indicated in the corresponding box.
Adopting a number from the phone book of the mobile phone
3. Tap on the
(From the phone book) button.
4. Select the contact which you want to adopt for the Speed Call.
The SELECT PHONE NUMBER window opens. It shows all the phone
numbers saved for the selected contact.
5. Tap on the phone number you want to use for the Speed Call.
The MODIFY PRESET window opens again. The new configuration is
indicated in the corresponding box.
Handsfree Module
- 103 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Deleting a Speed Call number
3. Tap on the
(Delete) button.
4. Confirm that you want to delete the Speed Call number.
The MODIFY PRESET window opens again. There are no longer any
phone numbers or names in the corresponding boxs.
10.7.2
Settings
In the SETTINGS window you can configure the settings for the phone
functions of the hands-free module.
►
In the HANDSFREE MODULE window tap on
Bluetooth Settings.
(More) >
The BLUETOOTH SETTINGS window opens.
Volume of the Phone Call: The volume of the phone call can be controlled
independently of the volume of the navigation application.
Volume of the Ring Tone: The volume of the ring tone can be controlled
independently of the volume of the navigation application.
Info about New Texts: Select whether you want incoming text messages to be
announced (Yes or No).
Read Out Texts: Select whether you want text messages (SMS) read out when
they are selected (Yes or No).
Bluetooth Function: Select whether you want to activate the Bluetooth function
(Yes or No).
The hands-free module cannot connect to a mobile phone or headset if
the Bluetooth function is deactivated.
Others May Connect: Select whether other devices should be able to initiate a
connection (Yes or No).
Discoverable by Others: Select whether other Bluetooth-capable devices (in
particular mobile phones) should be able to detect the navigation device
(Yes or No).
Reconnect Automatically: Select whether the connection to the last connected
phone is to be restored automatically (Yes or No) as soon it comes
within range again.
Sort phone book by: Select the column to be used for sorting the phone book
(First Names or Last Names). This setting applies only to the phone
book display in the navigation device.
For information about configuring the settings in this window refer to
"Configuring the Navigation System" on page 118.
- 104 -
Handsfree Module
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Note: In order for the last connection to be restored without further
questioning, the navigation device must be saved in your mobile phone
as "authorised" or "authorised device" (the exact wording can vary from
manufacturer to manufacturer).
Note: The Discoverable by Others and Others May Connect settings
are effective only when the Bluetooth function is activated.
A Bluetooth connection can be initiated from the mobile phone only
when Yes is selected for both settings.
11
NAVIGON Live
This chapter is relevant for you only if your navigation device is a
NAVIGON 92 Premium Live.
With the NAVIGON Live module you can access up-to-date online
services of NAVIGON Live Services at any time:
►
►
►
►
►
Local Search (Google Local Search): If you are searching for a
particular category of destination, e.g. a Thai restaurant, you can
use Google Local Search. You then have access to the
recommendations and ratings of millions of people world-wide.
Traffic Live: You can now receive traffic information from the
NAVIGON Live server. One of the server's functions is to evaluate
anonymously collected floating car data from the many users of
NAVIGON Live services. As the result, traffic jams can be detected
and avoided more quickly and more reliably. The evaluation of
floating car data also helps to calculate the estimated time of arrival
more exactly.
Weather Service Live: You are informed about the current weather
situation for every point of the road network on the navigation maps
available. A weather forecast for the next few days is also provided.
Safety Cameras Live (Mobile Safety Camera Live): You are
informed in real time about hazards such as mobile speedcams and
are yourself able to report mobile speedcams. This way you can
notify other NAVIGON Live users quickly and easily about current
hazards in your current vicinity.
Parking Live (CleverParking Live): If for example you want to
navigate to a car park, you can find out before starting the
navigation whether there are any free parking spaces still there.
You are also provided with a forecast as to whether the car park is
getting fuller or emptier at the present time.
The information you receive depends on the information which the
car park operator makes available.
NAVIGON Live
- 105 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
►
Events Live: If you want to go to a concert, a trade fair or some
other event, here you will find not only the address of the venue but
also information about the event itself. You can phone the venue in
order to book tickets and you can navigate there of course.
Whether an event is listed and which information is available
depends on the organiser or the venue operator.
►
Fuel Live: If you need petrol, you will be shown a list of petrol
stations nearby. You can read how much the grade of petrol used
by you vehicle costs at the particular petrol station and whether it is
a relatively expensive or inexpensive petrol station.
Whether prices are available and how up to date the information is
depends on the petrol station operator.
Not all the above mentioned services will be available already when you
purchase your device. In the button bar tap on
(NAVIGON Live) > Additional NAVIGON Live services to
find out which other services you can still install.
Services which have not been installed yet are easy to purchase using
the NAVIGON Fresh software. NAVIGON Fresh can be downloaded
free of charge from the website www.navigon.com/fresh.
If there is no Additional NAVIGON Live services button, you have
installed all the services.
The data connection is set up by mobile radio. The SIM card needed for
this is inserted in the navigation device (refer to "SIM card" on page 11).
It can be used only for the NAVIGON Live services and is blocked for
all other services (telephone, SMS, MMS etc.).
11.1.1
Costs
Use of the NAVIGON Live services is free for a certain period from the
day of initial activation. No mobile radio charges or data traffic charges
are incurred. After this period you can continue to use the services by
extending the subscription. For details go to our website
www.navigon.com/live.
No additional charges arise for using the NAVIGON Live services in
European countries other than your home country. Please note
however that e.g. information about parking space, prices and
availability does not exist in every country on a nation-wide basis.
For more details about the availability and scope of the NAVIGON Live
services in various countries and about subscriptions go to
www.navigon.com/live.
- 106 -
NAVIGON Live
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
11.2
Using the NAVIGON Live services
The NAVIGON Live services are seamlessly integrated in the
navigation software. Many services are used automatically without any
change to the operation of the navigation device compared to the
version without NAVIGON Live services. For example, there is no
change to the program flow when a traffic jam is reported. The only
change is that the traffic information from the NAVIGON Live services
is more up to date and more precise than the traffic information from the
radio stations.
11.2.1
Weather Service Live
The Weather Service Live service provides up-to-date weather data
for every point of the road network on the navigation maps available. A
weather forecast for the next few days is also available.
Wetter data for your current position
This function is interesting above all when you want a weather forecast
for the next few days.
1. In the button bar tap on
►
►
(NAVIGON Live).
When the map is open, tap on any point of the map to open the
button bar.
Tap on Weather Service Live.
The WEATHER SERVICE window opens. You are shown a map view
containing your position. Alongside are the current weather data
and a forecast for the next two days.
Weather data for your destination / along the route
Weather along the route
You can call up weather data for your route at any time during
navigation.
1. Tap on any point of the map to open the button bar.
2. In the button bar tap on
(NAVIGON Live).
3. Tap on Weather Service Live.
The WEATHER SERVICE window opens. You are shown a map view
containing your remaining route. Alongside are the current weather
data for the destination and a forecast for the next few days.
Note: If you have planned a multi-leg route, the weather data for the
ultimate destination will be shown and not the data for the next
intermediate destination.
NAVIGON Live
- 107 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Weather data for a different location
You can call up weather data for every point on the map which can be
entered as a destination for the navigation system.
If you enter an address, it suffices to enter the town. However, you may
also enter the street and the house number.
Information about entering navigation destinations can be found in
chapter "Specifying a destination" on page 31.
You have entered a destination. The DESTINATION window is open.
►
In the DESTINATION window tap on
Service.
(More) > Weather
The WEATHER SERVICE window opens. You are shown a map view
containing the town you entered. Alongside are the current weather
data and a forecast for the next two days.
11.2.2
Safety Cameras Live (Mobile Safety Camera Live)
The Safety Cameras Live service informs you during navigation about
hazards such as mobile speedcams or changed speed limits. You are
also informed very quickly when a hazard no longer exists. The
timeliness of the data is assured by the reports sent in by numerous
NAVIGON Live users. You too can report new speedcams easily and
quickly.
Caution! The use of this feature is subject to legal restrictions in some
countries. Inform yourself about the legal situation in the country in
which you are travelling.
Configuring warnings about speedcams
1. In the button bar tap on
Cameras Live.
(NAVIGON Live) > Safety
The WARN OF SAFETY CAMERAS window opens.
2. Determine whether you would like to be warned of safety cameras
►
►
- 108 -
Only safety cameras: You will be warned of known safety
cameras.
Safety cameras and hotspots: You will also be warned of points
often used for mobile safety cameras.
►
Do Not Warn: You will not be warned.
►
Uninstall: This product feature will be uninstalled.
NAVIGON Live
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Reporting new or changed hazards
You can notify NAVIGON about any changes to traffic monitoring
systems and routing.
The map is open in Standard or Navigation mode.
1. Tap on the map to show the button bar.
2. Tap on
(Navigation Options).
3. Tap on MyReport.
►
When the MYREPORT - MAP window appears, tap in the righthand corner of the screen on the button
(Safety Cameras Live).
The MYREPORT - SAFETY CAMERAS window opens.
4. Tap on the button which corresponds to the change you want to
report (e.g. New Safety Camera, Change of Speed Limit, Safety
Camera (Mobile) Removed).
A message will appear confirming that your entry was saved.
5. Tap on OK.
11.2.3
Parking Live (CleverParking Live)
The Parking Live service provides details about numerous parking
options. These details cover e.g. prices, opening times, number of free
parking spaces, trends in available capacity, availability of parking
spaces for women, availability of parking spaces for the handicapped,
type of payment, type of monitoring, …
Note: The Parking Live service can only provide the information which
is made available by the car park operator. This is not always the case
where information about available capacity and prices is concerned.
Parking Nearby
1. In the button bar tap on
Live.
(NAVIGON Live) > Parking
The PARKING NEARBY list opens. It contains possible car parks in
order of distance from your current position.
For some of the parking options you are shown online information
such as e.g. the number of currently free parking spaces, the
currently valid price or the trend in available capacity.
Some parking options are marked by a small asterisk (e.g.
).
There is more information available for these parking options, e.g.
opening times or the number of parking spaces for women or the
number of parking spaces for the handicapped.
NAVIGON Live
- 109 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
2. Select a car park.
The INFORMATION window opens. It contains address data and any
other information which may be available.
3. Tap on Start Navigation to navigate to the selected car park.
The system calculates the route. When the route calculation is
finished, the map opens in Route preview mode. The destination is
indicated on the map.
For detailed information on how to start navigation, please refer to
chapter "Route preview" on page 42. Please read on there.
Parking Close to Destination
During navigation you can start a search for car parks near your
destination.
1. In the button bar tap on
Live.
(NAVIGON Live) > Parking
- or ►
Use one of the methods described in this manual to search for a car
park near your destination.
The PARKING CLOSE TO DESTINATION list opens. You are shown
possible car parks in order of distance from your destination.
For some of the parking options you are shown online information
such as e.g. the number of currently free parking spaces, the
currently valid price or the trend in available capacity.
Some parking options are marked by a small asterisk (e.g.
).
There is more information available for these parking options, e.g.
opening times or the number of parking spaces for women or the
number of parking spaces for the handicapped.
2. Select a parking option.
The INFORMATION window opens. It contains address data and any
other information which may be available (see also "Information
about the destination" on page 38).
3. Tap on Interim Destination to add the selected car park as an
interim destination to the current navigation.
The system calculates the route. When the route calculation is
finished, the map opens in Route preview mode. The destination is
indicated on the map.
For detailed information on how to start navigation, please refer to
chapter "Route preview" on page 42. Please read on there.
- 110 -
NAVIGON Live
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
11.2.4
Fuel Live
The Fuel Live service looks for petrol stations near your current
position and informs you about the prices for the grade of petrol you
have selected in the settings.
Note: GPS reception must be good enough for determining your
position. Check the
(GPS Ready) symbol to see whether GPS
reception is good enough.
If GPS reception is not good enough, the system will look for petrol
stations near the last known position. If there is no last known position,
the Fuel Live function will not be available.
For more details refer to the chapter "Initialising the GPS receiver" on
page 30.
Note: The Fuel Live service can only provide the information which is
made available by the petrol station operator. This is not always the
case in particular where opening hours are concerned. Similarly,
information about prices may not be up to date or may not be available
at all.
1. In the button bar tap on
(NAVIGON Live).
2. Tap on Fuel Live.
If you have not yet your vehicle's fuel grade, a window will open and
remind you.
►
Tap on Settings settings to enter the grade of fuel now.
- or -
►
Tap on Next to continue the search for petrol stations.
Details of how to set the grade of fuel whose price you want shown can
be found in "Configuring the NAVIGON Live services" on page 116.
The PETROL STATIONS NEARBY list opens. It contains the petrol
stations near your current position whose operators have provided
online information and sell the grade of fuel you have selected in
the settings. It also contains all the petrol stations near your current
position whose operators have provided no online information.
If online information is available you will see
►
►
the price of the grade of petrol which you have selected in the
settings. If the price information is too old it will not be shown.
a coloured symbol indicating whether this petrol station is
relatively inexpensive or not (
►
NAVIGON Live
green,
yellow,
red).
the time when the price information was last updated.
- 111 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
3. Select a petrol station.
The INFORMATION window opens. It contains address data and any
other information which may be available.
4. Tap on Start in order to navigate to the selected petrol station.
If navigation is in progress, tap on Interim Destination to drive to the
selected petrol station as the next destination.
11.2.5
Local Search (Google Local Search)
When you search for POIs, the Google Local Search service provides
you with the same results as when searching with Google Maps.
For many POIs in the hit list there are assessments which were written
by Google Maps users and rankings which range from 1 star to 5 stars
(
).
The average ranking is always shown. No star means that no rating
was given yet.
Note: Google allows the use of the Google Local Search service only
if you observe its conditions of use which can be viewed at
www.google.com/accounts/TOS.
1. In the button bar tap on
(NAVIGON Live).
2. Tap on Local Search.
- or In the NAVIGATION window tap on Enter Destination > Search for
POI > Local Search.
The LOCAL SEARCH window opens.
3. To search for a POI near your current position, enter a search term,
e.g. "Pizza".
To search for a POI in a certain town, enter the search term with the
name of the town, e.g. "Pizza Hamburg".
If the town you want is abroad, you can also enter the name of the
country, e.g. "Pizza Paris France".
Please note that every entry is possible. If you make a mistake, you
might not receive the results you expected.
You have an absolutely free choice of search term, but the number
of hits depends greatly on you entering a suitable search term.
4. Tap on Search.
The RESULTS list opens. It contains the POIs which were found.
Shown alongside each POI is the average rating (
1 star to
5 stars). No star means that no rating was given yet.
5. Tap on the name of the destination to which you want to navigate.
The DESTINATION window opens.
- 112 -
NAVIGON Live
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
►
Tap on
(Information) if you want to read the assessments
for this destination or want to see the destination on the map
(see also"Information about the destination" on page 38).
6. Tap on Start in order to navigate to the stipulated address.
If navigation is in progress
►
►
Tap on Next.
Then tap on Interim Destination to add the selected destination
as an interim destination
- or -
►
►
Tap on Start Navigation to end the current navigation and start
a new navigation to the selected destination.
Tap on
(Parking) in order to search for and navigate to a car
park near your destination.
The system calculates the route. When the route calculation is
finished, the map opens in Route preview mode. The destination is
indicated on the map.
A description of all available options in the DESTINATION window can be
found in the chapter "Options in the Destination window" on page 42.
For detailed information on how to start navigation, please refer to
chapter "Route preview" on page 42. Please read on there.
11.2.6
Events Live
When searching for events the Events Live service provides not only
information about the venue (such as the address, phone number, …)
but also details of the event itself.
Note: Whether an event is listed and which information is available
depends on the organiser or the venue operator.
You can search for events near your current position but also for events
in a specific location.
NAVIGON Live
- 113 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Events Nearby
Note: GPS reception must be good enough for determining your
position. Check the
(GPS Ready) symbol to see whether GPS
reception is good enough.
If GPS reception is not good enough, the system will look for events
near the last known position. If there is no last known position, the
Events Nearby function will not be available.
For more details refer to the chapter "Initialising the GPS receiver" on
page 30.
1. In the button bar tap on
(NAVIGON Live).
2. Tap on Events Live > Nearby.
The CATEGORY window opens.
3. Select a category from which you would like to find events.
Categories in which no events are available nearby will not be
available for selection.
If sub-categories exist for the category you have selected, the SUB
CATEGORY list opens.
4. Select a sub-category from which you would like to find events.
The EVENTS NEARBY list opens. It contains events of the selected
category, sorted by distance from the venue.
5. Tap on the name of the event in which you are interested.
The DESTINATION window opens.
►
Tap on
(Information) if you want to read details of the
event or want to see the venue on the map (see also
"Information about the destination" on page 38).
6. Tap on Start in order to navigate to the stipulated address.
If navigation is in progress
►
►
Tap on Next.
Then tap on Interim Destination to add the selected destination
as an interim destination
- or -
►
►
Tap on Start Navigation to end the current navigation and start
a new navigation to the selected destination.
Tap on
(Parking) in order to search for and navigate to a car
park near your destination.
The system calculates the route. When the route calculation is
finished, the map opens in Route preview mode. The destination is
indicated on the map.
- 114 -
NAVIGON Live
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
A description of all available options in the DESTINATION window can be
found in the chapter "Options in the Destination window" on page 42.
For detailed information on how to start navigation, please refer to
chapter "Route preview" on page 42. Please read on there.
Events in a City
1. In the button bar tap on
(NAVIGON Live).
2. Tap on Events Live > in a City.
The CITY window opens.
3. Enter the name or the postal code of the destination town.
4. Select a category from which you would like to find events.
Categories in which no events are available in the specified location
will not be available for selection.
If sub-categories exist for the category you have selected, the SUB
CATEGORY list opens.
5. Select a sub-category from which you would like to find events.
The Events in a City list opens. It contains events of the selected
category, sorted by distance from the venue.
6. Tap on the name of the event in which you are interested.
The DESTINATION window opens.
►
Tap on
(Information) if you want to read details of the
event or want to see the venue on the map (see also
"Information about the destination" on page 38).
7. Tap on Start in order to navigate to the stipulated address.
- or Tap on
(Parking) in order to search for and navigate to a car
park near your destination.
The system calculates the route. When the route calculation is
finished, the map opens in Route preview mode. The destination is
indicated on the map.
A description of all available options in the DESTINATION window can be
found in the chapter "Options in the Destination window" on page 42.
For detailed information on how to start navigation, please refer to
chapter "Route preview" on page 42. Please read on there.
NAVIGON Live
- 115 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
11.2.7
Traffic Information (Traffic Live)
The Traffic Live service also analyses anonymously collected floating
car data from the many users of the service. This offers for example the
following advantages:
►
►
►
Obstructions which cause traffic congestion can be detected and
avoided more quickly and more reliably.
The end of a traffic obstruction is detected more quickly and more
reliably. Unnecessary detours can be avoided.
Estimated times of arrival can be calculated more precisely.
The Traffic Live service does not change the way you operate the
navigation device; the only difference is the source of reference for the
traffic information.
For details of the TMC function refer to chapter "TMC (Traffic
Information)" on page 79.
11.3
Configuring the NAVIGON Live services
In the SETTINGS window you can configure the settings for the
NAVIGON Live services.
1. In the button bar tap on
(NAVIGON Live).
The NAVIGON LIVE window opens.
2. Tap on
(More) > NAVIGON Live Settings.
The NAVIGON LIVE SETTINGS window opens.
Use NAVIGON Live Services: Select whether you want the NAVIGON Live
services to be available (Yes or No).
Source of traffic information: Select the traffic information source you want to
use (NAVIGON Live services or radio stations). The NAVIGON Live
services -also include floating car data from numerous vehicles in its
analysis of the traffic situation. As the result they often provide more
information and sooner.
Fuel type: Select the grade of petrol for your vehicle. The Fuel Live service will
indicate prices only for the grade of petrol selected here.
Optimise Traffic Recognition: The navigation device sends anonymised floating
car data to the NAVIGON Live server. The more users that provide
floating car data anonymously, the better the system can identify traffic
jams and the more reliably it can avoid them. Estimated times of arrival
can also be calculated more precisely. Select whether you want to send
floating car data (Yes or No). Floating car data cannot be traced back in
any way to you personally.
- 116 -
NAVIGON Live
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Details of how to operate the SETTINGS window can be found in chapter
"Configuring the Navigation System" on page 118.
11.4
Indicating the status
All key data concerning your NAVIGON Live module and the validity of
the subscription to the NAVIGON Live services can be found in the
NAVIGON LIVE STATUS window.
1. In the button bar tap on
(NAVIGON Live).
The NAVIGON LIVE window opens.
2. Tap on
(More) > NAVIGON Live Status.
The NAVIGON LIVE STATUS window opens. It contains the following
information:
►
►
The number of the SIM card in the NAVIGON Live module,
►
The IMEI number of the NAVIGON Live module
►
11.5
The date up to which the subscription to the NAVIGON Live
services is valid or since which the subscription has expired,
the activation code for the NAVIGON Live services last entered on
the navigation device.
NAVIGON Live modem check
If no connection to the NAVIGON Live server is possible, this modem
test may be useful in finding the cause of the problem. You can use the
results of the test to search selectively for solutions at
www.navigon.com/faq.
1. In the button bar tap on
(NAVIGON Live).
The NAVIGON LIVE window opens.
2. Tap on
(More) > NAVIGON Live modem check.
The NAVIGON LIVE MODEM CHECK window opens. The modem test
will now be carried out.
11.6
Information about all aspects of the navigation
system
From time to time the NAVIGON Live server will send you information
about updates or add-ons for your navigation device.
When new information is available, the NAVIGON Live button changes
its appearance from
NAVIGON Live
to
.
- 117 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
1. In the button bar tap on
(NAVIGON Live).
The NAVIGON LIVE window opens.
2. Tap on the large button (
) at the left edge of the screen.
The message is displayed.
12
Configuring the Navigation System
The SETTINGS window is the starting point for customising the
navigation system to match your personal preferences.
For details of how to select and configure a route profile refer to the
chapter "Route Profiles" on page 69.
Settings can be reached via the
(More) button in the
NAVIGATION window and in many other windows of the navigation
application.
►
In the NAVIGATION window tap on
(More).
The SETTINGS window opens.
The settings of the navigation application are divided into two main
categories:
System Settings: Here you can make the settings for operating the
navigation device. You can also select which information you want to
have displayed on the device and in which format you want it
presented.
Navigation Settings: Here you can make settings for the map and for
the map presentation and can select the information you want shown
during navigation.
►
Tap on a button to open the corresponding settings window.
The settings in the SYSTEM SETTINGS and NAVIGATION SETTINGS
windows are divided into sub-categories (e.g. General, Language and
Keyboard, Map Display).
►
Tap on a button to open the corresponding settings window.
You can use the
(Up) and
through the list page by page.
- 118 -
(Down) buttons to scroll
Configuring the Navigation System
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Some settings can adopt only the values Yes or No. These settings can
be recognised by the checkbox alongside the setting.
If the checkbox is activated (
If the checkbox is deactivated (
), the value is Yes.
), the value is No.
Some settings can adopt many different values. These settings can be
recognised by the
(List) button. The current value is visible.
1. Tap on
(List).
A list with all possible values opens. The currently valid value is
marked.
2. Tap on the value you want. It is now marked (
).
3. Tap on OK.
The list will close. The new value is indicated.
Some settings are adjusted by means of a slider, e.g. the settings
Volume of the Assistant, Brightness Day or Brightness Night.
The markings on the slider indicate the current status.
►
Tap on the
or
button to decrease or increase the value.
For each setting there is a
(Help) button. When you tap on it you will
see an exact definition of the setting in question.
You can close the settings windows in two ways:
►
Tap on OK.
Any changes you have made will be adopted.
►
Tap on Cancel.
Any changes you have made will not be adopted.
Configuring the Navigation System
- 119 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
13
Appendix
13.1
Technical data of the navigation device
Dimensions
Weight
Operating
conditions
Operating
temperature
Storage
temperature
Humidity
CPU
Operating system
Display
Memory
RAM
Flash
GPS
TMC
GPRS
Device keys
Keyboard
Loudspeaker
Microphone
I/O
Memory card
slot
Slot for SIM
card
USB
Bluetooth
- 120 -
138,8 x 83,2 x 14,2 mm
NAVIGON 92 Premium Live:
138,8 x 83,2 x 15.8 mm
NAVIGON 92 Plus: 190 g
NAVIGON 92 Premium: 190 g
NAVIGON 92 Premium Live: 203 g
-10°C to 70°C (14°F to 158°F)
-30°C to 80°C (-22°F to 176°F)
0% to 90%, non-precipitating
STM Cartesio 2064 (520MHz)
Microsoft Windows CE 6.0
5” LCD colour display with capacitive
touch-panel, ≥ 350 cd/m², Contrast
ratio: 300:1
480 x 272 pixel (WQVGA)
128 MB
4 GB
Yes (STM STA5630, ST-AGPS)
Built-in antenna
Yes
Integrated GPRS module with SIM
card reader
(only NAVIGON 92 Premium Live)
1 (On/Off)
Software keyboard
Yes
Yes (only NAVIGON 92 Premium,
NAVIGON 92 Premium Live)
microSD
Yes (only
NAVIGON 92 Premium Live)
1 x USB 2.0
Yes (only NAVIGON 92 Premium,
NAVIGON 92 Premium Live)
Integrated
With echo suppression
Appendix
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
5V/1,5A = (direct voltage, DC)
Via mini-USB socket
Power supply
Rechargeable
battery
Charging
Car charger
cable
Appendix
Type
LiPoly, 1100 mAh
Electronic
Input
Output
Integrated
12V = (direct voltage, DC)
5V/1,5A = (direct voltage, DC)
- 121 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
13.2
§1
NAVIGON Licensing Policy
Scope of Regulations
This Agreement regulates the relations between the user and
NAVIGON AG, Schottmuellerstrasse 20 A, 20251 Hamburg, developer
and proprietor of the exclusive utilisation rights to the NAVIGON
software (“Software”) as specified in the order. The subject matter of
this Agreement is copyright interests.
§2
Extent of Use
(1)
NAVIGON grants the user the non-exclusive right, unlimited by time and
location, to utilise the Software at a utilisation volume as specified in the
order. The licensing includes the right to install and use the Software in
accordance with the documentation and pursuant to these regulations.
(2)
NAVIGON expressly informs the user that complete utilisation of the
Software is not possible until after proper registration.
(3)
The user must ensure that the above mentioned restricted utilisation
rights are complied with.
(4)
Any kind of use which goes beyond the framework as stipulated in the
Agreement requires the written consent of NAVIGON. In the event that
such utilisation should be exploited without NAVIGON’s consent,
NAVIGON shall charge the amount accruing for this extended utilisation
in accordance with the valid price list at the time. NAVIGON shall
reserve the right to assert further reaching claims for compensation of
damages. The user shall have the right to prove lower damages.
(5)
All the above mentioned utilisation rights shall only be transferred to the
user after full and final payment of the license fee.
§3
(1)
- 122 -
Copyright and Protection Rights
The user acknowledges the copyrights of NAVIGON and therewith its
exclusive utilisation and exploitation rights to the Software. Exclusive
utilisation and exploitation rights also exist with regard to extended
development of the Software or amendments thereto, which NAVIGON
has created for the user compliant with the order.
Appendix
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
(2)
Any kind of not explicitly authorized copying of the Software in its
entirety or partially, any kind of not expressly authorized passing on of
the Software and development of similar Software or segments of such
Software or utilization of the contractual Software as master template
shall in particular be deemed to be judicially and contractually
prohibited.
(3)
The user acknowledges the imprint, trademark, trade name and patent
rights of NAVIGON to the Software and the relevant appending
documentation. The user is forbidden to remove, change or in any other
way camouflage the copyright notices and identifications pertaining to
existing protection rights.
§4
Passing on the Software
(1)
The user is permitted to sell or give away the Software and the user
manual or any other accompanying materials on a permanent basis to
third parties, under the proviso that the acquiring third party is in accord
that the contractual terms and conditions at hand shall henceforth be
also be imposed on it.
(2)
In the event of passing on the Software, the user shall hand over to the
new user all copies of the program, including possible back-up copies
made, or destroy the copies not handed over. As a result of passing on
the Software, the former user’s utilisation rights to the program shall
extinguish.
(3)
The user is permitted to sell or give away the Software and the user
manual or any other accompanying materials to third parties on a
temporary basis, if this is not done within the framework of leasing or
renting out for gainful purposes, under the proviso that the acquiring
third party agrees that the contractual terms and conditions at hand
shall henceforth also be imposed on it. For the period of assignment of
the Software to third parties, the assigning user shall have no right to
any kind of utilization of the program. For the period of assignment of
the Software to third parties, the assigning user shall have no right to
any kind of utilisation of the program. Renting out or granting a lease for
gainful purposes shall be prohibited.
(4)
The user may not assign the Software to third parties if there should be
any justified suspicion that such third party could violate the contractual
terms and conditions, especially by making unlawful copies.
Appendix
- 123 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
§5
Reproduction Rights and Access Security
(1)
The user may reproduce the Software if the respective copying should
be necessary for operation. Necessary reproduction shall be deemed to
be the installation of the program from the original data carrier to the
bulk memory of the hardware used as well as loading of the program
into random access memory.
(2)
Furthermore, the user is permitted to make copies for back-up
purposes. However, fundamentally, only one single back-up copy may
be made for safekeeping. The back-up copy has to be identified as
such.
(3)
If regular copying of the complete database, including computer
programs, is indispensable for reasons of data security or to ensure
speedy reactivation of the computer system after a total crash, then the
user is allowed to make back-up copies in the number specifically
required. The data carriers used in this case must be marked
accordingly. The back-up copies may only be used for purely archiverelated purposes.
(4)
Further reproductions, which also include release of the program code
on a printer as well as photocopying of the manual, may not be made
by the user. Any additional manuals required by employees have to be
obtained from NAVIGON.
§6
Multiple Deployment and Network Integration
(1)
The user may use the Software on any hardware available to it.
However, in the event that the user should replace the hardware, it is
obliged to delete the Software from the hardware utilised up till then.
Any isochronous storage, keeping in stock or operation on more than
only one hardware unit is not permissible.
(2)
The deployment of the entrusted Software within a network or any other
multiple workstation computer system is not permissible if thereby the
possibility of simultaneous multiple usage should be facilitated. Should
the user select to use the Software within network operations or any
other multiple workstation computer system, the user is obliged to
abstain from simultaneous multiple use by integration of access
protection devices or to compensate NAVIGON by payment of special
network license fees to an amount calculated on the basis of the
number of users linked up with the computer system. The user shall be
informed immediately by NAVIGON with regard to network license fees
to be raised in each individual case as soon as the user has informed
NAVIGON in writing of the intended network integration and the number
of integrated users. The implementation into such kind of network or
multiple workstation computer system shall only be permissible after full
and final payment of the network licensing fees.
- 124 -
Appendix
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
§7
Third Party Software
The Software contains third party software products which have been
integrated into the contractual Software or supplied together with the
contractual Software. NAVIGON fundamentally only awards such rights
which are necessary for general use of the programs as components of
the contractual Software and which NAVIGON is authorised to grant.
No modification rights or further processing rights are incorporated
therein.
§8
Decompiling and Amendment of Programs
The user is forbidden to retranslate the entrusted program code into
other code configurations (decompiling) as well as any other kind of
inverted development of the diverse manufacturing phases of the
Software (reverse engineering) or to carry out program amendments of
any kind unless such actions should serve purposes of eliminating
serious defects, especially such defects which can not be avoided by
organisational or any other reasonable measure of remedy. Copyright
markings, serial numbers as well as other characteristics serving
purposes of identification of the program may not be eliminated or
changed. Any removal of copy protection or similar protective routine
measures is prohibited without the knowledge and co-operation of
NAVIGON.
§9
Final Clauses
(1)
In the event that any provision contained in this License Policy should
be determined to be invalid or become invalid, the effectiveness of the
other regulations shall not be affected thereby. The said invalid
provision shall be replaced by a valid provision within the context of the
remaining contractual interpretation, which comes as close as possible
to the intended economical purpose of such invalid provision.
(2)
Amendments and supplements to these regulations have to be in the
written form and have to be expressly identified as such. Verbal
ancillary agreements shall be deemed to be ineffective. This
requirement of written form may only be renounced by written
agreement.
(3)
If legally permissible, the Parties agree that the laws of the Federal
Republic of Germany shall apply to all legal relations arising from these
contractual relations, under exclusion of UN Purchase Law.
Appendix
- 125 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
(4)
If the user should be a businessman within the meaning of the
Commercial Code, legal entity under public law or special assets under
public law, all disputes which may arise in connection with the
accomplishment of these contractual regulations shall fall under the
jurisdiction of Hamburg.
13.3
Declaration of conformity
NAVIGON AG declares herewith that the devices described in the
manual are in conformance with the basic requirements and other
relevant provisions of EU Directive 1999/5/EC and the R&TTE
Directive.
The declaration of conformity can be viewed on the Internet at
www.navigon.com/ce-erklaerung.
14
Troubleshooting
In this chapter you will find solutions to problems which may arise
during use of the navigation system.
This list does not claim to be complete. Answers to many other
questions can be found on the NAVIGON website (see "Questions
about the product" on page 8).
I have connected a charger to the navigation device. A connection to a
computer is shown on the screen.
- or I have connected the navigation device to a computer but it is not
detected as a removable disc.
The USB connector of the charger is not fully inserted in the case.
- or The USB connector is not connected correctly.
1. Unplug the connector.
The navigation device will carry out a new start. Wait for the
navigation software to be reloaded.
2. Insert the USB connector from the charger into the corresponding
socket of the navigation device swiftly as far as it will go (see
"Description of the navigation device" on page 9).
My navigation device makes no response any longer, the screen is frozen.
Perform a reset.
►
Use a thin object to press the Reset key (see "Description of the
navigation device" on page 9).
The software will be restarted. Your settings and your saved
destinations and routes will be retained.
- 126 -
Troubleshooting
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
It seems to me that the battery of my navigation device becomes flat
relatively quickly when the device is not connected to an external power
supply.
Some settings can be configured so that energy consumption is
minimised.
1. In the NAVIGATION window tap on
Settings > Power and Screen.
(More) > System
2. Set the values for Brightness Day and Brightness Night as low as
possible.
3. Tap on OK.
4. Tap on
(Back).
The NAVIGATION window is now open again.
I have accidentally activated presentation mode.
If you have accidentally activated demo mode when you start the
navigation application for the first time, you can deactivate it again as
follows:
1. in the NAVIGATION window tap on
Presentation.
(More) > Close
You will be prompted to confirm that you want the device reset to
the as-delivered state.
2. Tap on the Yes button.
The software is re-started and behaves as if started for the first time
after being purchased (see "Using the Navigation System for the
First Time" on page 17).
3. Make sure that the Start in Presentation Mode checkbox in the
PRESENTATION MODE window is not activated. If necessary, tap on
the checkbox in order to set the value Yes (
to No (
checkbox activated)
checkbox not activated).
Note: Use only accessories that are recommended by NAVIGON
expressly for your navigation system. NAVIGON AG accepts no liability
for errors or damages resulting from the use of other accessories.
For suitable accessories go to www.navigon.com or your authorised
dealer.
Troubleshooting
- 127 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
15
Index
A
Activate ............................................ 15
B
Block ................................................ 79
Bluetooth
Activate ........................................ 94
Connect ....................................... 93
Pairing.......................................... 90
Bluetooth ........... see Handsfree Module
Bluetooth Connection ....................... 90
Button bar..............................19, 56, 62
C
Call
Dial Number ................................. 98
Phone Book ................................. 99
Preset .......................................... 99
Recent Calls................................. 99
Call in Progress
Enter Destination........................ 100
Enter numerals ........................... 101
Hang up ..................................... 101
Muting ........................................ 101
Show Map .................................. 100
Use handsfree ............................ 100
Use Mobile Phone ...................... 101
Compass .......................................... 21
Configuration
NAVIGON Live ........................... 116
Conventions followed in this
manual ............................................... 7
Costs .............................................. 106
Current Position
Save............................................. 79
D
Data entry......................................... 26
Destination
Delete Destination ........................ 46
- 128 -
Enter an Address ..........................32
Enter Destination ..........................31
Events ........................................ 113
in a City .................................. 115
Nearby ................................... 114
Favourites ..................................... 39
Delete All .................................. 46
Delete Destination ....................46
Rename.................................... 46
From Map ..................................... 41
From the phone book ............ 40, 101
Google Local Search .................. 112
Home Address ........................ 41, 47
Last Destinations ..........................39
Delete All .................................. 46
Delete Destination ....................46
Local Search............................... 112
New Destination............................31
Parking
near the destination ................ 110
Nearby ................................... 109
POI ............................................... 35
in a City .................................... 36
Nationwide ...............................37
Nearby ..................................... 35
Save ............................................. 45
Saved destination .........................31
Start .............................................. 42
Take Me Home ....................... 41, 47
Voice Command ...........................34
Destinations
Manage ........................................45
E
Enable Screenshots ..........................73
Energy ................................ 13, 22, 127
Enter an Address ..............................32
Entering data.....................................26
Events
in a City ...................................... 115
Nearby ........................................ 114
Events Live ..................................... 113
Index
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
F
Favourites
Delete All...................................... 46
Delete Destination ........................ 46
Rename ....................................... 46
Favourites .................................. 39, 45
From the phone book ................. 40, 45
Fuel ................................................ 111
Fuel Live......................................... 111
G
Google Local Search ...................... 112
GPS
Faulty reception............................ 29
Initialise ........................................ 30
Signals ......................................... 16
Symbols ....................................... 21
GPS Status....................................... 78
H
Handsfree Module
Activate ........................................ 94
Bluetooth Connection ................... 90
Call .............................................. 98
Call in Progress .......................... 100
Connect ....................................... 93
Delete Device............................... 95
Dial Number ................................. 98
Enter Destination........................ 100
Enter numerals ........................... 101
Hang up ..................................... 101
Import Phone Book ...................... 96
Import recent calls ........................ 97
Incoming Call ............................... 97
Incoming text message ................ 98
Muting ........................................ 101
Open ............................................ 88
Pairing.......................................... 90
Phone Book ................................. 99
Preset .................................. 99, 103
Recent Calls................................. 99
Settings ...................................... 104
Show Map .................................. 100
Index
Symbols ........................................23
Text Inbox ................................... 102
Use handsfree ............................ 100
Use Mobile Phone ...................... 101
Home Address
Edit ............................................... 47
Home Address ............................ 41, 47
Hotline.................................................8
I
Info
NAVIGON Live............................ 117
K
Keyboard ..........................................24
L
Last Destinations
Delete All ...................................... 46
Delete Destination ........................46
Last Destinations......................... 39, 45
Local Search ................................... 112
M
Manual
Conventions ....................................7
Symbols ..........................................7
Map
Button bar ............................... 56, 62
Destination search ........................67
Pedestrian ....................................64
Reality View .................................. 63
Route preview ...............................57
Standard ....................................... 56
Vehicle..........................................59
Memory card .....................................14
Mobile Safety Camera Live ............. 108
Muting ............................................... 23
MyRoutes .................................... 43, 54
- 129 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
N
P
Navigation
Block ............................................ 79
MyRoutes ............................... 43, 54
No GPS.................................. 44, 55
Route Profile .......................... 43, 54
Simulation .................................... 44
Exit .......................................... 44
Start ......................................... 44
Start ....................................... 44, 55
Start ............................................. 42
Start ............................................. 53
Stop Navigation ............................ 67
Unblock ........................................ 79
Navigation Application
Start ............................................. 30
Navigation system
Button bar .................................... 19
Description ..................................... 9
Energy ......................................... 13
Installation .................................... 12
Memory card ................................ 14
Safety information .......................... 9
Scope of Delivery ........................... 8
Start ............................................. 16
Technical data............................ 120
TMC antenna ............................... 14
TMS receiver................................ 14
NAVIGON Live
Activate ........................................ 15
Configuration.............................. 116
Costs.......................................... 106
Info............................................. 117
NAVIGON Live modem check .... 117
Settings ...................................... 116
Status......................................... 117
Subscription ............................... 106
Symbols ....................................... 24
New Destination ............................... 31
New Route
Route points ................................. 49
Starting Point ............................... 48
Pairing...............................................90
Parking
CleverParking Live ...................... 109
near the destination .................... 110
Nearby ........................................ 109
Parking Live ................................ 109
Parking
Back to My Vehicle .......................75
Last Destination ............................74
Parking Close to Destination ......... 74
Pedestrian mode...........................73
Skip current destination ................ 76
Phone ............... see Handsfree Module
Phone Book
Import Phone Book .......................96
Refresh .........................................96
Phone Book ...................................... 99
POI
in a City ........................................ 36
Nationwide ....................................37
Nearby ..........................................35
POI on Your Route........................76
Preset ............................................. 103
O
Options ............................................. 21
- 130 -
R
Reality View ...................................... 63
Recent Calls
Import recent calls ........................97
Recent Calls...................................... 99
Route Optimisation
Automatic...................................... 82
On Request .................................. 80
Route Planning
Delete Route Point ........................50
Edit Route .....................................49
Last Route ....................................52
Load Route ................................... 51
Managing routes ...........................50
New Route ....................................48
Add Route Point .......................48
Route points .............................49
Starting Point ............................48
Open............................................. 48
Route points
Index
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Edit .......................................... 49
Save Route .................................. 50
Saved Routes
Delete All Routes ..................... 52
Delete Route............................ 51
Rename ................................... 51
Show Route ................................. 52
Simulation .................................... 53
Route Planning ................................. 48
Route points
Delete Route Point ....................... 50
Order............................................ 49
Route Profile..........................43, 54, 69
Routes
Delete All Routes ......................... 52
Delete Route ................................ 51
Last Route.................................... 52
Load Route .................................. 51
Manage ........................................ 50
Rename ....................................... 51
Route Profile ................................ 54
Save Route .................................. 50
Show Route ................................. 52
Simulation
Exit .......................................... 53
Start ......................................... 53
Start ............................................. 53
Routes .............................................. 48
S
Safety Cameras Live ...................... 108
Safety information............................... 9
Save Position ................................... 79
Saved destination ............................. 31
Saved Routes
Delete All Routes ......................... 52
Delete Route ................................ 51
Rename ....................................... 51
Scope of Delivery ............................... 8
Screenshots ..................................... 73
Service ............................................... 8
Settings
Configuration.............................. 118
Handsfree Module ...................... 104
NAVIGON Live ........................... 116
TMC ............................................. 87
Index
Traffic Information .........................87
Volume ......................................... 62
Settings Handsfree Module
Bluetooth Connection....................90
Delete Device ...............................95
Preset ......................................... 103
Simulation
Exit ......................................... 44, 53
Start ........................................ 44, 53
Software keyboard ............................24
Status
NAVIGON Live............................ 117
NAVIGON Live modem check ..... 117
Stop Navigation................................. 67
Subscription .................................... 106
Support ...............................................8
Symbols
NAVIGON Live..............................24
Traffic Information .........................22
Traffic Live .................................... 23
Symbols used in this manual ...............7
T
Take Me Home ........................... 41, 47
Technical data................................. 120
Text Inbox ....................................... 102
TMC
Edit Mode .....................................86
Route Optimisation ................. 80, 82
Show ............................................ 83
Symbols ........................................ 22
Trade marks ........................................8
Traffic Information
Edit Mode .....................................86
Route Optimisation ................. 80, 82
Show ............................................ 83
Symbols ........................................ 22
Traffic Live .................................. 116
Traffic Live
Symbols ........................................ 23
Traffic Information ....................... 116
Troubleshooting .............................. 126
- 131 -
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
U
W
Unblock ............................................ 79
Use Voice Command........................ 27
Warranty .............................................7
Weather Service
Weather Service Live .................. 107
Weather Service Live
Weather Service ......................... 107
V
Voice Command ......................... 27, 34
Volume ............................................. 62
- 132 -
Index
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement