Craftsman 315.114073 Fluorescent Light Operator's Manual
Below you will find brief information for Fluorescent Light 315.114073. This manual will describe the features and functions of the model, as well as provide instructions for proper operation and maintenance. It is important that you read and understand all information in this manual before attempting to use the light and be aware of all the safety precautions.
Advertisement
Advertisement
OPERATOR’S MANUAL
19.2 V FLUORESCENT LIGHT
Model No.
315.114073
bATTERIES ANd CHARGERS
SOLd SEPARATELy
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
Customer Help Line: 1-800-932-3188
Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA
Visit the Craftsman web page: www.sears.com/craftsman
983000-711
12-26-07 (REV:03)
Save this manual for future reference
TAbLE OF CONTENTS
WARRANTy
ONE-yEAR FULL WARRANTy ON CRAFTSMAN TOOL
If this Craftsman tool fails to give complete satisfaction within one year from date of purchase, RETURN IT TO ANy
SEARS STORE OR OTHER CRAFTSMAN OUTLET IN THE UNITEd STATES FOR FREE REPLACEMENT.
If this Craftsman tool is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
INTROdUCTION
This product has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have been given top priority in the design of this product making it easy to maintain and operate.
2
GENERAL SAFETy RULES
IMPORTANT SAFETy INSTRUCTIONS
WARNING! REAd ANd UNdERSTANd
ALL INSTRUCTIONS.
Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.
Remove battery pack from worklight before replacing bulb or performing any routine
maintenance or cleaning. Replace bulb with same type rated 19.2 V, 13 watt.
do not disassemble the worklight.
WARNING!
When using electric appliances, basic precautions should always be followed, including the following:
do not place worklight or battery pack near fire
or heat. They may explode. Also, do not dispose of a worn out battery pack by incinerating. Do not incinerate the battery, even if it is severely damaged or completely worn out. The battery may explode in fire.
Read all the instructions before using the appliance.
do not operate worklight or charger near flammable liquids or in gaseous or explosive
atmospheres. Internal sparks may ignite fumes.
To reduce the risk of injury, close supervision is necessary when an appliance is used near children.
do not use outdoors.
To reduce the risk of electrical shock, do not put
flashlight or charger in water or other liquid. Do not place or store appliance where it can fall or be pulled into a tub or sink.
Use only the charger supplied by the manufacturer
to recharge.
Use only recommended battery pack. Any attempt to use another battery pack will cause damage to your worklight and could possibly explode, cause a fire, or personal injury.
do not store your worklight in a damp or wet location. do not store in locations where the
temperature is less than 50°F or more than 100°F.
Do not store in outside sheds or in vehicles.
do not permit children to use worklight
unsupervised. It is not a toy. The temperature of the bulb will become hot after being on for only a short period of time. This hot temperature can cause burn injury if touched and can create sufficient heat to melt some fabrics.
If wrapped or in contact with fabrics, the worklight lens can produce sufficient heat to melt some
fabrics. To avoid serious personal injury, never allow the worklight lens to come in contact with anything.
MOdEL bATTERy PACK
(Li-ion)
315.113740
(130285003)
CHARGER
(Multi-Chemistry)
315.259260
(140351001)
Keep light dry, clean, and free from oil and grease.
Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products, or any strong solvent to clean the worklight.
don’t expose worklight to rain. Water entering a power tool will increase the risk of electric shock or malfunction.
315.114073
bATTERy PACK
(Ni-Cd)
315. 259260
(140351001)
130279003,
130279005
(Item No. 9 11375)
1425301 ( 9 11041)
315.115730
(140301003)
315.115720
(140301001) do not overreach. Keep proper footing and balance
at all times. Proper footing and balance enable better control of the worklight in unexpected situations. Do not use on a ladder or unstable support.
3
GENERAL SAFETy RULES
WORKLIGHT USE ANd CARE
Store worklight out of the reach of children and
other untrained persons. Worklights are dangerous in the hands of untrained users.
Let worklight cool for several minutes after use before changing the bulb.
do not use or permit use of worklight in bed or
sleeping bags. This worklight lens can melt fabric and a burn injury could result.
SAFETy RULES FOR bATTERy WORKLIGHTS
Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water, then neutralize with lemon juice or vinegar. If liquid gets in your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention.
batteries can explode in the presence of a source
of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately.
do not crush, drop or damage battery pack. do not use a battery pack or charger that has been
dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately.
Failure to heed this warning can result in serious personal injury.
If the power supply cord is damaged, it must be replaced only by the manufacturer or by an authorized service center to avoid risk.
Save these instructions. Refer to them frequently and use them to instruct others who may use this power tool. If you loan someone this power tool, loan them these instructions also.
4
SyMbOLS
Some of the following symbols may be used on this worklight. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the worklight better and safer.
SyMbOL NAME dESIGNATION/EXPLANATION
V Volts Voltage
A min
Amperes
Minutes
Alternating Current
Direct Current
Current
Time
Type of current
Type or a characteristic of current no No Load Speed Rotational speed, at no load
.../min
Class II Construction
Per Minute
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc., per minute
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read The Operator’s Manual
Safety Alert
Hot Surfaces
To reduce the risk of injury, user must read and understand operator’s manual before using this product.
Precautions that involve your safety.
To reduce the risk of injury or damage, avoid contact with any hot surface.
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SyMbOL SIGNAL MEANING dANGER:
WARNING:
CAUTION
Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
CAUTION (Without Safety Alert Symbol) Indicates a situation that may result in property damage.
WARNING:
To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the Operator’s Manual. If you do not understand the warnings and instructions in the Operator’s Manual, do not use this product. Call Customer
Service for assistance.
SAVE THESE INSTRUCTIONS
5
OPERATION
WARNING:
The safe use of this product requires an understanding of the information on the tool and in this operator’s manual.
Before use of this product, familiarize yourself with all operating features and safety rules.
CAUTION: When placing the battery pack in the tool, be sure raised rib on battery pack aligns with the groove in the tool and that the latches snap into place properly. Improper assembly of the battery pack can cause damage to internal components.
to lower to rAise hAnging /storAge hook switch trigger bAtterY PAck lAtches dePress lAtches to releAse bAtterY PAck
Align rAised ribs with groove inside worklight bAse; slide together until lAtches click.
Fig. 1
Fig. 2
6
OPERATION
bULb REPLACEMENT
Replace the bulb with the same type rated 19.2 V, 13 watt.
Always ask for replacement bulb number 7819602 .
TO REPLACE FLUORESCENT TUbE:
Remove the battery pack from the worklight.
Remove the screw to release the lens cover. Remove the lens cover by pulling the cover forward and lifting it from the housing.
To remove the old fluorescent tube from the spring, gently grasp the lower edge of the rubber cushion and the sides of the bulb. Carefully work the tube in a sideto-side motion while easing the tube forward and up until the tube is free from the spring.
NOTE: Do not pull the fluorescent tube straight out from its center, as this increases the chance of breakage.
Remove the rubber cushion from the old fluorescent tube and place it on top of the new tube, rounded edge facing outward.
Insert the new fluorescent tube into the spring by aligning the prongs on the tube with the holes in the tube socket area. Gently push down on the base of the new tube until fully engaged. Do not force the tube into place.
Replace the lens cover by sliding the lower edge into the housing. Align the screw holes at top. With a screwdriver, tighten the screw.
NOTE: Do not use a drill to tighten the screw, as the drill’s torque may be strong enough to damage the lens cover.
Replace the battery pack.
screw
Pull lens cover
ForwArd to reMove rubber cushion lens cover
Fluorescent tube
(PArt no. 7819602)
7 bulb socket
AreA
Fig. 3
MAINTENANCE
bATTERIES
This product will accept DieHard
®
19.2 V lithium-ion battery packs and Craftsman 19.2 V nickel-cadmium battery packs.
The batteries for this product have been designed to provide maximum trouble-free life. However, like all batteries, they will eventually wear out. Do not disassemble battery pack and attempt to replace the batteries. Handling of these batteries, especially when wearing rings and jewelry, could result in a serious burn.
To obtain the longest possible battery life, we suggest the following:
For lithium-ion batteries:
Remove the battery pack from the charger once it is fully charged and ready for use.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below
80°F and away from moisture.
Store battery packs in a 30%-50% charged condition.
Every six months of storage, charge the pack as normal.
For nickel-cadmium batteries:
Remove the battery pack from the charger once it is fully charged and ready for use.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below
80°F.
Store battery packs in a “discharged” condition.
bATTERy PACK REMOVAL ANd PREPARATION
FOR RECyCLING
To preserve natural resources, please recycle or dispose of batteries
properly.
Li - Ion
This product uses nickel-cadmium and lithium-ion batteries. Local, state or federal laws may prohibit disposal of batteries in ordinary trash.
Consult your local waste authority for information regarding available recycling and/or disposal options.
WARNING:
Upon removal, cover the battery pack’s terminals with heavy-duty adhesive tape. Do not attempt to destroy or disassemble battery pack or remove any of its components. Lithium-ion and nickelcadmium batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and/or body parts as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury.
8

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- 19.2 V operation
- Fluorescent bulb
- Hanging hook
- Battery-powered
- Replaceable bulb