Charging Instructions - Energizer Technical Information

Charging Instructions - Energizer Technical Information
Charging Instructions: CHFCV
1.
Insert the batteries in the charger as indicated
in the charging slots.
2.
Load 2 or 4 AA, AAA, C, or D size NiMH
batteries or 1 or 2 9V NiMH batteries at a time.
3.
Plug the charger into the proper AC outlet.
When batteries are placed in the charger, one
or two LED lights will glow red indicating
charging. (refer to the information below for typical
charge times). The LED will go off indicating
charge completion.
4-5.5 hrs. for AAA (600-800mAh)
11-13 hrs. for AA (1600-1800mAh)
15-16.5 hrs. for AA (2100-2500mAh)
16.5 hrs. for C/D (2300-2600mAh)
10-13.5 hrs. for 9V (110-150mAh)
4.
Important Safety Instructions:
1.
To reduce the risk of injury, charge only
rechargeable NiMH batteries with the charger.
Other types of batteries might burst, causing
personal injury or damage to your charger.
2.
Do not charge batteries with different
capacities at the same time.
3.
For indoor use only. Do not expose charger
to rain, snow, or excessive moisture.
4.
Never use an extension cord or any
attachment not recommended by Energizer®.
May result in a risk of fire or electric shock.
5.
Do not operate the charger if it has been
subjected to shock.
6.
Do not disassemble the charger. Incorrect
reassembly may result in shock or fire.
7.
Always unplug the charger before
attempting maintenance or cleaning.
8.
Never alter the plug provided. Improper
connection can result in shock or fire.
9.
This charger is not intended for use by
young children or infirm persons without
supervision.
Batteries must be charged in pairs according
to specific battery sizes.
10.
Never use as a power source.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement