Toshiba SD-4000KC User Manual
TOSHIBA
Introduction
ovo (56 COMPACT Connections
ISE
VIDE 0 (DIGITAL VIDEO) VIDEO] DIGITAL AUDIO
DVD VIDEO PLAYER Funcion so
SD-4000KU -
SD-4000KC
OWNER’S MANUAL
О0босву SE «$
DIGITAL Digital Out
© 2006 Toshiba Corporation
Introduction
SAFE
Y PRECAUTION
CAUTION
| CAUTION | The lightining flash with arrowhead symbol, within an equilateral
RISK OF ELECTRIC SHOCK A triangle, is intended to alert the user to the presence of uninsulated
DO NOT OPEN “dangerous voltage” within the product's enclosure that may be of
AVIS
WARNING : . 4 eat: , , o
ELECTRIC SHOCK, DO NOT REMOVE i The exclamation point within an equilateral triangle is intended to
TO REDUCE THE RISK OF
COVER {OR BACK}. NO USERSERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL,
RISQUE DE CHOC ELECTRIQUE NE
sufficient magnitude to constitute a risk of electric shock to persons.
PAS QUVRIR
alert the user to the presence of important operating and main-
tenance (servicing) instructions in the literature accompanying the
appliance.
E] The symbol for CLASS lI (Double Insulation)
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
CAUTION:
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS
HIGN VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT
OPEN THE CABINET. REFER SERVICING TO QUALIFIED
PERSONNEL ONLY.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG
TO WIDE SLOT, FULLY INSERT.
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME
CAUTION:
LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE
DE LA PRISE ET POUSSER JUSQU’AU FOND.
PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS
GIVEN IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE
UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
~ IMPORTANT SAFETY INSTRUCTIONS
К о № =
. Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.nstall in accordance with the manufacture’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus(including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grouding prong. The wide blade or
the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
IMPORTANT SAFETY INSTRUCTIONS
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus, ;
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
>
—
=
©
a
с
o
=
o
=
peu
SIMA
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid had been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
ADDITIONAL SAFETY INSTRUCTIONS
15. When you use headphones, keep the volume at a moderate level. If you use the headphones continuously with
high volume sound, it may cause hearing damage.
16. Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of
fire or electric shock.
17. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall
be placed on the apparatus.
18. Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal
injury.
19. Do not place a heavy object on or step on the apparatus. The object may fall, causing serious personal injury
and serious damage to the apparatus.
20. Do not use a cracked, deformed , or repaired disc. These discs are easily broken and may cause serious
personal injury and apparatus malfunction.
. If the apparatus should smoke or smell,immediately disconnect the power cord from the wall outlet. Wait until
the smoke or smell stops, then ask your dealer for a check and repair. Neglecting to do so may cause fire.
22. While it is thundering, do not touch the connecting cables or the apparatus.
23. The apparatus includes lead, an ingredient of solder used on the PCB, which is a harmful substance to human
and the environment. When disposing of this apparatus, follow the rules and regulations in your area.
2
ad
3
introduction
IMPORTANT SAFETY INSTRUCTIONS |
CAUTION: This Digital Video Disc Player employs a Laser System. To ensure proper use of this product,
please read this owner's manual carefully and retain for future reference. Should the unit require
maintenance,contact an authorized service location. Use of control or adjustments or performance
of procedures other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure.
Visible and invisible laser radiation when open and interlocks defeated.
DO NOT STARE INTO BEAM.
FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rule. These fimits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications made to this equipment, not expressly approved by Toshiba, or parties
authorized by Toshiba, could void the user's authority to operate the equipment.
CAUTION: These servicing instruction are for use by qualified service personnel only .To reduce the risk of
electric shock do not perform any servicing other than that contained in the operating instructions
unless you are qualified to do so.
In the spaces provided below, record the Model and Serial No. located on the rear panel of your DVD Video Player.
Model No.
Serial No.
Retain this information for future reference.
Location of the required label
CERTIFICATION: PRODUCT COMPLIES WITH DHHS RULE 21 CFR SUBCHAPTER J IN EFFECT AT DATE OF
MANUFACTURE.
Be aware that this equipment is still powered when in standby mode. To disconnect this equipment completely from
the mains power, pull out the power plug from the wall outlet.
4
Precautions
Notes on handling |
| Notes on moisture condensation
E When shipping the DVD video player, the original
shipping carton and packing materials come in
handy. For maximum protection, repack the unit as
it was originally packed at the factory. Take care not
to give it a shock or shake when carrying.
Do not use volatile liquids, such as insect spray,
near the DVD video player. Do not leave rubber or
plastic products in contact with the DVD video
player for a long time. They will leave marks on the
finish.
The top and rear panels of the DVD video player
may become warm after a long period of use. This
is not a malfunction.
When the DVD video player is not in use, be sure to
remove the disc and turn off the power.
If you do not use the DVD video player for a long
period, the unit may not function properly in the
future. Turn on and use the DVD video player
occasionally.
Notes on locating |
Place the DVD video player on a level surface with
good ventilation. Do not use it on a shaky or unstable
surface such as a wobbling table or inclined stand.
The loaded disc may come off the proper position
and cause damage to the DVD video player.
When you place this DVD video player near a TV,
radio, or VCR, the playback picture may become
poor and the sound may be distorted. In this case,
place the DVD video player away from the TV, radio,
or VCR.
Notes ón cleaning |
Use a soft, dry cloth for cleaning. <
@ For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe
it dry.
Do not use any type of solvent, such as thinner and
_ benzine, as they damage the surface of the DVD
may video player.
O If you use a chemical saturated cloth to clean the
unit, follow that products instructions.
Inspection and Maintenance |
This DVD video player is a high technology, precision
device. If the optical pick-up lens and disc drive parts
become dirty or worn down, the picture quality may be
reduced. To avoid reduction in picture quality, it is
recommended that regular inspection and maintenance
(cleaning or parts replacement) be performed every
1,000 hours of use. For further details, contact your
nearest consumer electronics dealer.
Moisture condensation damages the DVD video player.
Please read the following carefully.
Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day. Drops of
water form on the outside of the glass. In the same way,
moisture may condense on the optical pick-up lens
inside this unit, one of the most crucial internal parts of
the DVD video player.
>
—
=
©
o
<
o
=
©
5
yample of moistup,
non
E Moisture condensation occurs during the following
cases.
@ When you bring the DVD video player directly from
a cold place to a warm place.
@ When you use the DVD video player in a room
where you just turned on the heater, or a place
where the cold wind from the air conditioner directly
hits the unit.
6 In summer, when you use the DVD video player in
a hot and humid place just after you move the unit
from an air conditioned room.
@ When you use the DVD video player in a humid
place.
Ш Do not use the DVD video player when moisture
condensation may occur.
If you use the DVD video player in such a situation,
it may damage discs and internal parts. Remove the
disc, connect the power cord of the DVD video
player to the wall outlet, turn on the DVD video
player, and leave it for two or three hours. After two
or three hours, the DVD video player will have
warmed up and evaporated any moisture. Keep
the DVD video player connected to the wall outlet
and moisture condensation will seldom occur.
Wall outlet
5
Introduction
N otes on Discs
| On handling discs | | Notes on copyright |
@ Do not touch the playback side of the disc. The unauthorized recording, use, distribution, or
revision of copyrighted materials including, without
limitation, television programs, videotapes, and DVDs,
is prohibited under the Copyright Laws of the United
States and other countries, and may subject you to
civil and criminal liability.
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
| Structure of disc contents
: = Normally, DVD video discs are divided into titles, and
| On cleaning discs | the titles are subdivided into chapters. VIDEO CDs and
audio CDs are divided into tracks.
@ Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the center DVD video disc
outwards with a soft cloth. Always keep the disc
clean. DVD video disc
Title 1 Title 2
Chapter1 Chapter2 | Chapter1 Chapter2 Chapter3
| ] | !
в [> —|
HO 2
— —,
[gs — | |
VIDEO CD/audio CD
VIDEO CD/audio CD
O If you cannot wipe off the dust with a soft cloth,
wipe the disc lightly with a slightly moistened soft Track 1 Track 2 Track3 Track 4 Track 5
cloth and finish with a dry cloth. | | | | |
@ Do not use any type of solvent such as thinner,
benzine, commercially available cleaners or 47 N | nr | |122 | Й au rN
antistatic spray for vinyl LPs. It may damage the
disc. Each title, chapter or track is assigned a number, which
is called “title number”, “chapter number” or “track
number” respectively.
There may be discs that do not have these numbers.
| Оп storing discs
O Do not store discs in a place subject to direct
sunlight or near heat sources.
O Do not store discs in places subject to moisture and
dust such as a bathroom or near a humidifier.
O Store discs vertically in a case. Stacking or placing
objects on discs outside of their case may cause
warping.
6
: Notes on Discs (continued)
About this owner’s manual | | Playable discs
This owner's manual explains the basic instructions of This DVD video player can play the following discs.
this DVD video player. Some DVD video discs are — >
produced in a manner that allows specific or limited Disc Mark Contents | Disc | > tie o
operation during playback. As such, the DVD video Size | playbacktme =
player may not respond to all operating commands. (o ded diso) =
This is not a defect in the DVD video player. Refer to Audio | 120m [approx 8 hours >
instruction notes of discs. D DVD he (double sided disc)
“ SI” may appear on the TV screen during operation. | discs ” (moving Approx. 80 minutes
A “(Q” means that the operation is not permitted by VIDEO | pictures) (single sided disc)
the DVD video player or the disc. : 8 cm |Approx. 160 minutes
About (double sided disc)
The @w>@eB> E> icons on the heading bar show COMPACT | Audio |, | Approx. 74 minutes
the playable discs for the function described under VIDEO MSE video
that heading. CDs (moving
BW> : You can use this function with DVD video [DIGITAL VIDEO) ze pictures) | 8cm | Approx. 20 minutes
discs.
: You can use this function with VIDEO CDs. COMPACT 12 ст | Approx. 74 minutes
: You can use this function with audio CDs. Ao CNS Audio | 8cm |
| DIGITAL 5 (co Approx. 20 minutes
| Notes on region numbers | — nee)
udro
+ m
The region number of this DVD video player is 1.If DivX® Drv>< video ee DivX cui
region numbers, which stand for their playable area, res 8 cm
are pred on your DVD video disc and you do not : -
find (5) , disc playback will not be allowed by The following discs are also available.
the СЕ ауег. ое this case, the DVD video) player will 6 DVD+R/ERW, DVD+R DL and DVD-ROM discs
of DVD video format.
e CD-R/CD-RW discs of CD-DA, Video CD, SVCD,
MP3, WMA, DivX? or JPEG format.
Some of these discs may be incompatible.
display a message on-screen.)
Some DVDs that have no region code label may
still be subject to area restrictions and therefore
not playable.
| On VIDEO CDs
You cannot play discs other than those listed above.
You cannot play DVD-RAM discs or non- standardized
discs, etc., even if they may be labeled as above.
This DVD video player supports VIDEO CDs equipped * DVD-ROM disc is not supported by DAT files.
with the PBC (Version 2.0) function. (PBC is the This DVD video player uses the NTSC color system,
abbreviation of Playback Control.) and cannot play DVD video discs recorded in any
You can enjoy two playback variations depending on other color system (PAL, SECAM, etc.).
types of discs. Because of problems and errors that can occur during
* VIDEO CD not equipped with PBC function (Ver 1.1). the creation of DVD and CD software and/or the
Sound and movie can be played on this DVD video manufacture of DVD and CD discs, Toshiba cannot
player in the same way as an audio CD. assure that this DVD player will successfully play every
« VIDEO CD equipped with PBC function (Ver 2.0). disc bearing the DVD and CD logos. If you happen to
experience any difficulty playing a DVD and/or CD disc
on this DVD player, please € contact Toshiba Customer
Service.
In addition to operation of a VIDEO CD not equipped
with the PBC function, you can enjoy playback of
interactive software with search function by using the
menu displayed on the TV screen (Menu Playback). DVD is a trademark of DVD Format/Logo Licensing
Some of the functions described in this owner's Corporation.
manual may not work with some discs.
7
introduction
Table of Contents
Introduction
@ SAFETY PRECAUTIONS » Function setup
@ IMPORTANT SAFETY INSTRUCTIONS.............. 3 O Customizing the Function Settings ...................
@ Precautions Setting procedure... mee E
O Not Di Setting detailS..…..…..…..….…erisienmenemnnnünnnnnnnnnnn
otes on Discs
Notes on region numbers... 7 @ Table of Languages
@ Table of Contents 8 Others
ificati i 9
O o of Controls 9 @ Before Calling Service Personnel.................
DVD display... RA RER R KR E KR cenaee 9 0 Specifications
Rear e 216 =] RE 10
Remote COntrol.…………….……..……..rreennnmnmnnnnnnnns 11 Limited United States Warranty...........—..—.——.—.-
Loading batteries ere eee eee — aaa 14 O Limited Canadian Warranty
Operating with the remote control...................... 14
@ Playing a Disc 15
Basic playback ..................e22 22... sas r annee 15
Resuming playback from the same location......16
Locating a specific chapter or track .................. 16
@ Playing MP3/WMA/Audio CD/JPEG/DivX®
Files 17
Connections
@ Connecting to a TV 19
Connecting to a TV. eee 19
Connecting to an audio system and TV
equipped with component video inputs.............. 20
@ Connecting to Optional Equipment................. 21
Connecting to an amplifier equipped with a
Dolbye Digital decoder..............................——_— 21
Connecting to an amplifier equipped with
Dolby Surround Pro Logic..................e e ..=re...eve.. 21
Connecting to an amplifier equipped with a
DTS* decoder.................eseiierirere EEE 22
Connecting to an amplifier equipped with an
MPEG2 audio decoder ............. ames 22
Connecting to an amplifier equipped with a
digital audio input.......................meeeeeeeee 22
8
| Identification of Controls
| Front panel |
ON/STANDBY button
OPEN/CLOSE button[3 > STOP button =
=
©.
с
S
=
3
Disc tray[ 6 > DVD display PLAY button
1.1/0 ON/STANDBY button 3. A OPEN/CLOSE button
Press to toggle the player between ON and OFF. Press to open and close the disc tray.
2.1 STOP button 4,» PLAY button
During DVD playback, press once to stop playback. Press to play the disc.
The unit records the stopped point, depending on
5.DVD display
the disc. Press PLAY button to resume playback from Display current disc information.
the stopped point. If you press this button again,
the unit will clear the stopped point causes the disc 6.Disc tray
to return to the beginning of the disc if playback When loading a disc, place the disc in the disc
starts again. tray with the label side facing up.
| DVD display | Chapter/Track
number indicator
The indicators vary depending on the kinds
of discs you play.
Multifunctional indicator (indicates
operating status or messages, etc.)
DVD video disc VIDEO CD Audio CD OPEN
*During playback: During playback: During playback:
Example Example Example
Some discs may only | Some discs may only | Some discs may only
display chapter display track display track
numbers. numbers. numbers.
9
Introduction
( Identification of Controls
| Rear panel |
VIDEO OUT (Y/Pe/Pr)
(Component video) jacks
COAXIAL DIGITAL
AUDIO OUT jack AC inlet
S VIDEO OUT jack [57
VIDEO OUT jack[3 >
To wall outlet
ANALOG AUDIO OUT (L/R)
jacks
1. ANALOG AUDIO OUT (L/R) jacks
Use audio/video cable supplied to connect to TV or
4.VIDEO OUT (Y/PB/PR)(Component video) jacks
If your TV or monitor or other similar devices has
component video inputs, you can produce a higher
monitor with audio/video inputs.
2.S VIDEO OUT jack quality picture on it by connecting its component
If the TV has an S video input, connect the DVD video cable to the Y/PB/PR jack on this unit.
5.COAXIAL DIGITAL AUDIO OUT jack
video player with the S video cable. When using the
S video cable, do not connect the yellow video cable
and component video cables (Y/PB/PR). connecting to the coaxial digital audio input on an
3.VIDEO OUT jack AV amplifier or receiver with digital audio input
Connect the video output to TV or monitor with audio Capability, but first you need to change the setting
video inputs capability. fo digital audio output on the SETUP MENU.
Use to output digital audio recorded on discs by
10
| Identification of Controls (continued)
The instructions in this manual describe the functions on the remote control.
| Remote control |
OPEN/CLOSE button
Number buttons
E.PM. button
E.A.M. button
ANGLE button
SUBTITLE button [ 6)
PAUSE/STEP button. 7
SKIP button
REV button [9 >
Direction buttons
(4/Y/</>)
TOP MENU button
CLEAR button
DISPLAY button
MEMORY button
PLAY MODE button
SETUP button
PROGRESSIVE button
POWER button
T button
SLOW button
AUDIO button
PLAY button
STOP button
SKIP button
FWD button
ENTER button
MENU button
RETURN button [28>
NAVI button
PBC button
A-B RPT button
ZOOM button
11
=
—
=
O
o
<
o
=
©
3
Introduction
( Identification of Controls (continued)
[1) OPEN/CLOSE button
Press to OPEN/CLOSE the disc tray.
[ 2> Number buttons
Press number buttons to play relevant chapter/track.
[3)E.P.M. button
Use to select the picture enhancement.
Select the picture enhancement by pressing A/V,
then press </ to make your selections.
To exit the picture enhancement selection, press
E.P.M. again.
[4)E.A.M. button
[5) ANGLE button
Use to toggle the sound enhancement on or off
when DVD discs is Dolby Digital 5.1Ch and “Digital
Output” is
While playing a scene recorded with multiple angles,
press the ANGLE button.
e.g.
Number changes to show the number of the
current angle. (The maximum number of
possible angles is 9.)
ANGLE button is also use to change the picture
transition mode of JPEG playback.
Press ANGLE button during JPEG playback will
change the picture transition mode as follows:
Wipe Down
Wipe Up
Center In
Center Out
Blind Down
Blind Up
Random
None
During slide show playback and when “ Loading...”
frame.
The instructions in this manual describe the functions on the remote control. Please see below:
PAUSE/STEP button
Press PAUSE/STEP to freeze playback.
During still playbacks, each time you press the
PAUSE/STEP button, the picture advances one
— [I> Step
Il Pause
[8) SKIP |44 button
Press SKIP [44 once within 5 seconds of playback
to skip to the previous chapter/track. If you press the
button after 5 seconds, it will start playback from the
beginning of the current chapter/track.
[9) REV ««button
Scan in fast reverse on DVD and other discs.
Press this button to toggle among the following
modes: <<X2 > <<X8 > <<X30 > <<X100 > ««Х2.
Direction buttons
Use UP/DOWN/RIGHT/LEFT to select a function
in the setup menu.
During JPEG playback, press the » repeatedly to
rotate the image clockwise by 90,180 or 270 degree.
Press the «repeatedly to rotate the image counter
clockwise by 270, 180 or 90 degree. When in Zoom
mode, this function does not work.
[11 TOP MENU button
Display the title menu on DVD Disc.
When playing JPEG, if you press TOP MENU in
full-screen review, the DVD video player will display
a menu of 9 thumbnail images.
If you display the top menu during playback and
press the TOP MENU button again without selecting
any title, the DVD video player may resume playback
from the point where you first pressed the TOP
MENU button(depending on the actual DVD video
disc.).
M2 CLEAR button
Use CLEAR to delete the scheduled program or to
cancel input data in the setting mode.
DISPLAY button
Bring up the on-screen display showing the
information of the current playing status.
is displayed, ANGLE button is not allowed to operate. MEMORY button
The prohibited sign “ © Not allowed at the moment ”
will be displayed on the TV screen.
[6)> SUBTITLE button
12
For DVD discs, press this button to change the
language of the subtitle.
To turn off the subtitle, press SUBTITLE several
times until “LJ Off” appears on the screen.
Notes
The numbers of languages vary with the DVD discs.
When you select a subtitle language which is not
included on the disc, the DVD video player plays a
prior language programmed on the disc.
During some scenes, the subtiltes may not appear
immediately after you change the subtitle language.
Press this button, the OSD will show as below:
Track number _T
chapter number — T
You can use the cursor button(-</»/ A/ Y) and
number buttons to input your desired title/chapter
/track. You can program up to 12 selections into the
_ memory (Memory playback). When you have finished
programming, you can move the cursor to the Play
Memory, then press the ENTER button to start the
playback. The programmed selections will be
cleared when you turn off the DVD video player.
M5) PLAY MODE button
Press PLAY MODE button to select desired features
using À / V and then press ENTER button to toggle
desired mode.
‘ Identification of Controls (continued)
Г Off Г Off Off Off
; ; Cha ter }
Оп Оп P Track
Title All
Chapter: Repeats the current chapter.
Title: Repeats all chapters within the current title.
Track: Repeats the current track.
All: Repeats the entire disc.
Off: Resumes normal playback.
SETUP button
Access the on-screen Setup menu for settings
adjustment.
A7> PROGRESSIVE button
Press to change the output signal for better picture
quality during stop mode. (See page 20.)
POWER button
Turn the unit on or set the unit to Standby mode.
[19 T button
You may press T and then press 4/Y to select
Title search / Chapter or Track search and Time
search. When you select a chapter/track number
greater than "10", press number "1" plus any
single number. Then press ENTER. For example,
if you want to select chapter/track 12, just press
the number button "1" and "2". The chapter/track
number "12" will appear on the Search menu
screen. Then press ENTER. But if you want to
select chapter/track number 10, press +10 and
then ENTER. If you input a wrong number, press
CLEAR button.
Press T twice, the display of Bookmark appears,
then press ENTER to mark the desired scene.
Press T again to turn off this display
Note
For VCD, Track Time and Disc Time selection is
not possible if the PBC mode is on.
SLOW button
Reverse/Forward slow playback. Press this button
to toggle among the following modes: 1>1/2 +1»1/4
— 1>1/8 — I>1/2 /«11/2 — 41/4 — «11/8 — «11/2.
[21> AUDIO button
For DVD discs, press this button to toggle between
different audio modes. The selected audio mode
will be displayed on the screen. For stereo discs,
press to switch the audio channel output.
Remarks: For bilingual edition VCD discs, press
the AUDIO button to select your audio channel
(Left,Right,Mix or Stereo).
22 PLAY button
Press to Start playback.
23> STOP button
Press once to stop playback and hold the last
position in memory. Playback can be resumed
where it was left off by pressing PLAY. Press
twice to clear the last playback position.
[24> SKIP »»| button
Advanced to the next chapter/track on DVD and
other discs.
[25 FWD »» button
Scan in fast forward on DVD and other discs.
Press this button to toggle among the following
modes: >» X2 — »»X8 —> >> ХЗО —> >» > Х100 -> » > Х2.
ENTER button
Selects options in menus. Plays a disc, chapter or
track with some discs. For other discs, press PLAY.
[27> MENU button
Display the menu of DVD disc.
RETURN buttons
When navigating disc menus, press to return to the
previous menu accessed.
NAVI buttons
Press to display and access features and Settings.
Select by pressing </> then press ENTER to
access the feature.
N To stop playback.
laa Playback starts from the beginning of the
current chapter or track.
> To start playback.
bei: To locate succeeding chapters or tracks.
KM : To pause playback.
[30> PBC button
Press to toggle between PBC On and PBC Off.
(Only applicable to VCD2.0/SVCD discs)
[31 A-B REPEAT button
Set the beginning and end points of a section to
repeat.
Notes
e Some discs may not permit A-B repeat operation.
e There may me a slight difference between point
and the location where playback actually resumes
depending on the disc.
32ZOOM button
Press this button to zoom in the current picture.
There are three zooming modes. Press cursor
buttons ( 4/ Y /</») to view a different part of the
zoom in image. You may move the image from the
centre position to UP, DOWN, LEFT, RIGHT
direction. To resume normal playback, press ZOOM
button repeatedly until the “() Off ” is displayed.
Notes
¢ The magnification level varies depending on the
picture size you select.
e Some discs may not respond to ZOOM feature.
13
=
o
=
o
Q
<
Q
=
o
=
Introduction
\
1 Open the cover.
Cg
0
Loading batteries |
Г )
2 Insert batteriers (AAA size).
Make sure to match the + and - on the
| batteries to the marks inside the battery
compartment.
Caution:
Never throw batteries into a fire.
Notes
* Be sure to use AAA size batteries.
* Dispose of batteries in a designated disposal area.
* Batteries should always be disposed of with the
environment in mind.
Always dispose of batteries in accordance with
applicable laws and regulations.
* If the remote control does not operate correctly, or
if the operating range becomes reduced, replace
batteries with new ones.
* When necessary to replace batteries in the remote
control, always replace both batteries with new ones.
Never mix battery types or use new and used
batteries in combination.
* Always remove batteries from remote control if they
are dead or if the remote control is not to be used
for an extended period of time. This will prevent
battery acid from leaking into the battery
compartment.
14
Operating with the remote control
( >
Point the remote control at the remote sensor
and press the buttons.
30° 30°
Within about 7 m (23 feet)
|
Distance: About 7 m (23 feet) from the front
of the remote sensor
About 30° in each direction of the
front of the remote sensor.
* Do not expose the remote sensor of the DVD
video player to a strong light source such as
“direct sunlight or other illumination. If you do
so, you may not be able to operate the DVD
video player via the remote control.
N —
Angle:
Notes on the remote control
* Direct the remote control at the remote sensor of the
DVD video player.
* When using the remote control, press the buttons at
intervals of about 1 second to ensure the correct
mode of operation.
“e Do not drop or give the remote control a shock.
* Do not leave the remote control near an extremely
hot or humid place.
Do not spill water or put anything wet on the remote
control.
* Do not open the remote control.
This section shows you the basics on how to play a disc.
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
=
3 Disc tray STOP 1 ON/STANDBY 8
©
N S
| po = on ve
—
2, 4 OPEN/CLOSE PLAY
.
| Basic playback |
Preparations
When you want to view a disc, turn on the TV and select the video input connected to the DVD video player.
When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the
input connected to the DVD video player.
— —
1 Press the ON/STANDBY button. | 4 Press OPEN/CLOSE to close the disc tray. )
POWER The DVD video player turns on. OPEN/CLOSE Playback starts. .
If you insert a DVD video disc that contains a
2 Press OPEN/CLOSE. I top menu, a menu may appear. Use the 4/ Y/
< / > to select the title you want to view,
OPEN/CLOSE then press ENTER to start playback.
4 The disc tray opens. * You may need to press the TOP MENU or
MENU button to display disc menu
(depending on the actual DVD video disc.).
3 Place the disc on the disc tray. \ ——
Notes
e |f the disc tray is holding a disc you have already
77 played, playback will begin from the location where
you last stopped. For resuming playback, see page 16.
of « Some video CD are recorded with PBC (Playback
Control), a menu with recorded contents may
appear on the TV if you have turned the PBC On.
You can make your selection according to its PBC
With the plavback menu. Press the PBC button on the remote control
side dom y to turn PBC On or Off anytime during Video CD
playback. When switching from PBC Off to PBC
* There are two different disc sizes. Place On mode, playback will start from the beginning of
the disc in the correct guide on the disc the disc.
tray. If the disc is out of the guide, it may -
damage the disc and cause the DVD m To star! playback in the stop mode
video player to malfunction. a PLAY
e Do not place a disc which is unplayable in LE
this DVD video player.
da
15
PAUSE/STEP
и
Resuming playback from the same location
( \ зе
№ To start playback from the beginning regardless
Press STOP at the location where you of the location where you stopped playback
want to interrupt playback.
1 Press STOP twice.
STOP The DVD video player memorizes
STOP
the location where playback is The DVD video player deletes the
stopped. memory of the location.
2 Press PLAY. 2 Press PLAY.
PLAY PLAY Playback starts from the
e The DVD video player resumes beginning of the current title.
layback from the location where
pay ar onw Playback starts from the
you stopped playback. beginning of the disc
— 7 Playback starts from the
Notes beginning of the current track.
* Resuming cannot function when: os * |f you want to return to the beginning of a DVD video
—you play a PBC-featured VIDEO CD while “PBC” is disc, open and close the disc tray once with the
set to “On”. OPEN/CLOSE button before pressing the PLAY button.
—you open the disc tray.
—you disconnect the power plug of the DVD video
player.
* There may be a difference in the location where
playback resumes depending on the disc.
* Settings you changed using the on-screen displays
while the DVD video player keeps a location in the
memory may function only after the memory is
cleared.
Locating a specific chapter or track
( \ Note
Press SKIP >» or |<< repeatedly to access the * Some titles may not display chapter numbers.
chapter or track number you want.
Playback starts from the selected chapter or track.
SKIP To locate succeeding chapters or tracks by
+) pressing the button once.
skip To locate previous chapter or track by
pressing the button once within 5 seconds
after playback.
If you press the button once after 5 seconds,
it will start playback from the beginning of the
current chapter or track.
16
H Play modes for MP3/WMA/Audio CD/JPEG/DivX®
When you play MP3/WMA/Audio CD/JPEG/DivX® ,
users are able to modify the Play modes through the
Toolkit which appears on the right of below picture on
the screen. Press < /» button to navigate between
the windows and 4/Y button to select files/tracks or
play mode items. Then press ENTER button. Please
refer to below steps to playback files/tracks in the
Memory View list:
1) Select Edit Mode in the Toolkit then press ENTER
button to start Edit Mode.
2) Select a file/track or more files/tracks you want in the
Original View list.
3) Select Add To Memory in the Toolkit then press
ENTER. “vv” will disappear from the screen. lt
means that the files/tracks you have selected already
added into the Memory View list.
4) Select Memory View in the Toolkit then press ENTER
to open the files/tracks in the Memory View list that
you already selected in step 2.
5) Press PLAY to playback all files/tracks in the Memory
View list.
The current
files name ——
filter
Repeat : Off
Mode
нее
150 ; AV : Normal
MESWMA/Aucio — [EE it
Nn CD icon 170 1703_DiVX_AMbps. AV!
v
ay DIVX/MPEG icon
fo JPEG icon
The Toolkit has the following play mode items:
* Filter (Audio/Photo/Video): Sets file filters.
* Repeat (Off/Track/All):
Off : Resumes normal playback.
Track: Repeats the current track/file.
All Repeats all files on the current folder or all
tracks on the disc.
* Mode (Normal/Shuffle/Random/intro):
Normal: Resumes normal playback.
Shuffle: Playbacks track/file in random order.
Random: Playbacks track/file in random order, and will
repeat playback the same track/file more
than one time.
Intro: Only playbacks the first 10 seconds of all the
files on the current folder or all tracks on the
disc.
* Edit Mode: Memory operation works only when
Edit Mode is selected.
To view tracks/files in the Memory
View list. It is disabled when the
Memory View list is empty.
Add To Memory: Add files/tracks to the Memory View
list. It is disabled if the Edit Mode is
not selected. (Only 10 files/tracks
can be selected each time to add to
memory. The maximum number of
files/tracks can be added is 30.)
To view files/tracks in the Original
View list.
* Memory View:
* Browser View :
aying MP3/WMA/Audio CD/JPEG/DivX “Files
* Clear: Delete the files/tracks in the Memory View
list. Select a file/track or more you want to delete in
stop mode. “Y ” will appear beside the deleted
file/track. Select Clear and then press ENTER.
It is disabled if the Edit mode is not selected.
Notes
* DivX? 8 JPEG do not support Intro mode.
* Filter is not applicable to Audio CD.
Hl Playable files
MP3/WMA disc compatibility with this player is limited as
follows:
* Playable discs: CD-R (650MB / 74 min. only)
CD-RW maybe not
recommendable.
* Sampling Frequency: 44.1 kHz only
* Bitrate:
MP3: 32 kbps - 320 kbps (CBR*)
Mode 1, Mode 2 XA Form 1
ISO9660 Level 1, 2 or Joliet
* CD physical format:
* File system:
* File name:
and numerals only, and must
incorporate “MP3” or “WMA”
extension. e.g.********.MP3”,
ma VA
* Total number of folders: Less than 256
* Total number of files: Less than 1000
* WMA codec version: V7 or V8 (Stereo sound only)
* CBR = Constant Bit Rate
This DVD player requires discs/recordings to meet
certain technical standards in order to achieve
optimal playback quality. There are many different
types of recordable disc formats (including CD-R
containing MP3/WMA files). Not all recordable
discs will operate or produce optimal playback
quality. The technical criteria set forth in this owner's
manual are meant only as a guide. Use of CD-RW
for MP3 files is not recommended.
You must obtain any required permission from
copyright owners to download or use copyrighted
content. Toshiba cannot and does not grant such
permission.
Microsoft, Windows Media, and the Windows Logo
are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or
other countries.
Ay
AM
Designed for
Windows
m Media"
Notes
* When the WMA or MP3 file is out of the above
specifications, the song may skip or mute with
counter moving.
* You can play in fast reverse or fast forward during
MP3 and DivX? playback but not WMA playback.
* During MP3 and DivX” playback, press T button to
search “Track Time”. It is not applicable to WMA.
17
WMA: 48 kbps - 192 kbps (CBR*)
A file name should be in alphabet
5
=
=
O
Q
<
O
=
©
3
Introduction
HB JPEG files compatibility
Discs whose compatibility with this DVD video player has been confirmed by TOSHIBA are as follows. Many of
these discs, when loaded, will make the DVD video player enter the automatic mode to play a prescribed folder
in the disc. To play other folders, display a folder list and select a folder.
CANON QuickCD FUJICOLOR CD Kodak Picture CD NORITSU QSS CD
JPEG disc compatibility with this DVD video player is limited as follows:
* Playable discs: CD-R (650MB / 74 min. only)
CD-RW maybe not recommendable.
* CD physical format: Mode 1, Mode 2 XA Form 1
* File system: ISO9660 Level 1, 2 or Joliet
* File name: A file name should be in alphabet and numerals only, and must
incorporate “JPG” extension. e.g.“"******* JPG” (Do not name the
file with “JPE” or “JPEG” extension.)
* Total number of folders: Less than 256
* Total number of files: Less than 1000
Depending on the file size, some files may not display the entire image.
Some discs may not permit this operation. Especially, the following conditions of included files will increase the
disc’s disability.
1. Pixels over 3072 x 2048 in height and/or width
2. File format except Exif
Hl DivX ® Playable files
DivX ® disc compatibility with this player is limited as follows:
* Playable discs: CD-R (650MB / 74 min. only)
CD-RW maybe not recommendable.
* Audio format: CBR MP3, VBR MP3, DivX” AC3
* Enhance video: GMC, Qpel, Progressive B-frames
* Frame rate: 8 to 25 fps
* CD physical format: Mode 1, Mode 2 X A Form 1
* File system: ISO9660 Level 1, 2 or Joliet
* File name: A file name should be in alphabet and numerals only, and must
incorporate “AVI” extension. e.g. “ ******* AV| ”
* Total number of folders: Less than 256
* Total number of files: Less than 1000
( DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license. )
Notes
* |t is recommended to record same kind of files in a CD-R.
* Some DivX? Video-On-Demand files may require registration code of your DVD Video player, you may get the
code in Default Setting. (Page 27)
18
Connections
| nnecting to a TV
“ Connect the DVD video player to your TV.
| Connecting to a TV
Г» Signal Flow
To wall outlet
To VIDEO
ouT
To ANALOG AUDIO OUT
To audio inputs
(red) Е „не В
* Make the following setting.
© OUT
Audio/Video cable(supplied)
suolJpeuvog
To S VIDEO
S video cable (not supplied)
To video input
(yellow)
-
On-screen display Select: Page
“Digital Output” “PCM” or “Bitstream” 26
S-Video (Composite)
“Video Output” | Component 25
P-Scan (Progressive)
Notes
* Refer to the owner's manual of the connected TV as well.
input
To S video input
If the TV has a S video input,
connect the DVD video player with
a S video cable. When using a
S video cable, do not connect the
yellow video cable and component
video cables (Y/PB/PR).
|
LEY
|
TV or monitor with
audio/video inputs
* When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the
wall outlet before making any connections.
* |f your television set has one audio input, connect the left and right audio outputs of the DVD video player to a
Y cable adapter (not supplied) and then connect to your TV. ;
* Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR
combination or video selector, the playback picture may be distorted as DVD video discs are copy protected.
* Analog audio out will not have sound if DTS playback is selected.
Interlaced outputs (ColorStream®)
Some TVs or monitors are equipped with component
video inputs. Connecting to these inputs allows you to
enjoy higher quality picture playback.
Actual labels for component video inputs may vary
depending on the TV manufacturer. (ex. Y, R-Y, B-Y
or Y, Cs, CR).
In some TVs or monitors, the colour leveis of the
playback picture may be reduced slightly or the tint
may change. In such a case, adjust the TV or monitor
for optimum performance.
Progressive outputs (ColorStream Pro®)
Some TVs or monitors are equipped with component
video inputs that are capable of reproducing a
progressively scanned video signal.
Connecting to these inputs allows you to view the
highest quality pictures with less flicker.
Consumers should note that not all high definition
television sets are fully compatible with this product
and may cause artifacts to be displayed in the picture.
In case of 525 progressive scan picture problems,
it is recommended that the user switch the connection
to the “standard definition” output. If there are
questions regarding our TV set compatibility with this
model 525p DVD player, please contact our
Customer Service Center.
19
Connections
Connecting to an audio system and TV equipped with component video inputs |
Г» Signal Flow
Le To wall outlet
Нов
ToY 1710 Рв | ТоРя
VIDEO | VIDEO] VIDEO
To ANALOG AUDIO OUT
* Make the following setting. To audio inputs of
On-screen display Select: Page the amplifier OUT {OUT | OUT
“Digital Output’ | “PCM” or 26 (red) Uy (white) UU [1 or so ou
“Bitstream” o PR video inpu
eo :
O 22
| Component O — Ce O To Pe video input
“Video Output” P-Scan 25 e Ed e eee
(Progressive) ===
To Y video input
Audio system uli | ЕН
* Only for TV equipped with component —
video input jacks which support the progressive scan. Component video inputs
E Switching the output signal (interlaced/progressive) using the remote control
You can temporarily switch the output signal for better picture quality.
Press PROGRESSIVE on the remote control during stop mode.
Press PROGRESSIVE again to turn off progressive mode.
If your TV does not support the progressive scan format, the picture will appear scrambled or blank. To return
to normal picture, press PROGRESSIVE button again to turn off progressive mode.
Notes
* Refer to the owner's manual of the connected equipment as well..
* When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the
equipment from the wall outlet before making any connections.
* |f you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this
case, place the DVD video player away from the tuner and radio.
* The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver's volume to
a moderate listening level. Otherwise, high volume sound may damage your hearing as well as the speakers.
* Turn off the amplifier before you connect or disconnect the DVD video player's power cord. If you leave the
amplifier power on, the speakers may be damaged.
* Progressive can be on/off only when “Video Output” is set to Component or P-Scan. (Page 25)
* In component connections, the screen might become pinkish in color when the “Video Output” is set to S-Video.
This is not a defect of this unit.
* Analog audio out will not have sound if DTS playback is selected.
* When using component video cables, do not connect the S-Video cable.
* The relation between Video Output setting and content output for each output jack is as following tabulation:
User setting/operation content output for each output jack
Video output setting S-video output Video output Component output
S-Video(composite) Composite Composite —
Component(interlaced) — Composite Interlaced
P-Scan(progressive) — Composite Progressive
ColorStream? and ColorStream Pro9 are registered trademarks of Toshiba America Consumer Products, L.L.C.
20
| Connecting to Optional Equipment
“You can enjoy high quality dynamic sounds by connecting the DVD video player to optional audio equipment.
| Connecting to an amplifier equipped with a Dolby® Digital decoder
Dolby Digital
Dolby Digital is the surround sound technology used in theaters Manufactured under license from ©
; showing the latest movies, and is now available to reproduce Dolby Laboratories. “Dolby” and the 5
this realistic effect in the home. You can enjoy motion picture double-D symbol are trademarks of 3
and live concert DVD video discs with this dynamic realistic | Dolby Laboratories. o
sound by connecting the DVD video player to a 6 channel ©
amplifier equipped with a Dolby Digital decoder or Dolby Digital * Use DVD video discs encoded via
processor. If you have a Dolby Surround Pro Logic decoder, you the Dolby Digital recording
will obtain the full benefit of Pro Logic from the same DVD movies system.
that provide full 5.1-channel Dolby Digital soundtracks, as well as * Make the following setting.
from titles with the Dolby Surround mark.
— - On-screen display| Select: Page
LS Bas Por
Sr — — “Digital Output” a Or 26
To
eS COAXIAL
type digital
audio input
O —
75 Q coaxial cable (not supplied)
| Connecting to an amplifier equipped with Dolby Surround Pro Logic |
Dolby Surround Pro Logic * Make the following setting.
You can enjoy the dynamic realistic sound of Dolby Surround
Pro Logic by connecting an amplifier and speaker system
(right and left front speakers, a center speaker, and one or two “PCM” or 26
On-screen display | Select: Page
rear speakers). Digital Output “Bitstream”
E With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in * Connect one or two rear speakers.
“Connecting to an amplifier equipped with a Dolby Digital The output sound from the rear speakers
decoder.” Refer to that amplifiers owners manual and set the will be monaural even if you connect two
amplifier so you can enjoy Dolby Surround Pro Logic sound. rear speakers.
® With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
Amplifier equipped with
Dolby Surround Pro Logic
| To audio input
To ANALOG В
AUDIO OUT |
A
—
Audio cable (not supplied)
21
Connections
) Connecting to Optional Equipment(continued)
Connecting to an amplifier equipped with a DTS © decoder |
Digital Theater Systems (DTS) —
DTS is a high quality surround technology used in theaters and | DTS” and “DTS Digital Out” are |
now available for home use, on DVD video discs or audio CDs. registered trademarks of DTS, Inc.
If you have a DTS decoder or processor, you can obtain the full * Use DVD video discs or audio
benefit of 5.1 channel DTS encoded sound tracks on DVD video CDs encoded via the DTS
discs or audio CDs. recording system.
Amplifier equipped with a * Make the following setting.
Г < > DTS decoder
= = On-screen display | Select: | Page
т
COAXIAL [74 mm SP 99 sy: ”
eS type digital Digital Output” |“Bitstream”| 26
O audio input
75 Q coaxial cable (not supplied)
| Connecting to an amplifier equipped with an MPEG2 audio decoder
MPEG2 sound
You can enjoy motion picture and live concert DVD video discs * Use DVD video discs encoded
with dynamic realistic sound by connecting an amplifier via the MPEG2 recording
equipped with an MPEG2 audio decoder or MPEG2 audio system.
processor. * Make the following setting.
Amplifier equipped with a
MPEG2 audio decoder
On-screen display | Select: | Page
To : “РСМ” or
COAXIAL “Digital Output” “Bitstream” 26
type digital
audio input
75 Q coaxial cable (not supplied)
| Connecting to an amplifier equipped with a digital audio input
2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by
connecting an amplifier equipped with a digital audio input and
speaker system (right and left front speakers). * Make the following setting.
Amplifier equipped with a On-screen display | Select: | Page
digital audio input
To
“Digital Output” | “PCM” 26
COAXIAL
type digital
audio input
75 Q coaxial cable (not supplied)
22
Function setup
—
Customizing the Function Settings
.
Setting procedure
Setting procedure
Press the SETUP button to display the main
menu on the screen. When the setup menu is
shown, the playback will be automatically paused.
1.Press 4/ Y button to select the desired setup,
then press » button.
2.Press 4/ Y button to select the sub menu, then
press ENTER.
3.Change the selection by 4/ button, by referring
to the corresponding pages, then press ENTER.
4.To select another option, press « button to go
back to step 1.
5.Press the SETUP button again to remove the
setup menu from the screen.
About the screen saver
When you leave the unit in DVD stop mode for
approximately 2 minutes, the screen saver of the
DVD video player automatically appears. To turn
off the screen saver, press the PLAY button.
Tray Lock
Press SETUP button, and then press the number
button 2005 to lock the tray.
Note
After the tray is locked, “Tray Lock Is On” will
appear on the screen when OPEN/CLOSE button
is pressed.
To unlock the tray, just follow the same procedure
as above.
Automatic Power Off function
If the DVD video player is stopped, or the screen
saver is engaged for approximately 20 minutes,
the DVD video player will automatically turn itself
off.
Setting details
OSD Menu
English: To view on-screen displays in English.
Francais: To view on-screen displays in French.
Espanol: To view on-screen displays in Spanish.
Subtitle
English: To display subtitles in English.
French: To display subtitles in French.
Spanish: To display subtitles in Spanish.
Auto: To display subtitles in different
languages other than you
selected.
Off: To disable subtitles.
English
French
Spanish
Auto
Notes
* Some DVD video discs may be set to display
subtitles in a different language other than you
selected. A prior subtitle language may be
programmed on the disc.
* Some DVD video discs allow you to change
subtitle selections only via the disc menu. If
this is the case, press the MENU button and
choose the appropriate subtitle language from
the selection on the disc menu.
DivX Subtitle
If your DivX” files include a subtitle file, then you
may select a supported DivX” subtitle language
from Central European:
Central : Albanian, Croat, Czech, Dutch, English,
European German, Hungarian, Irish, Polish,
Romanian, Slovak, Slovene and Serbian
23
dnjes uonoun4
Function setup
Setting details
Notes
* If your DivX®files do not include the subtitle
file, you cannot use this selection. TV Shape
« Supported subtitle file formats:
.Srt, .sub, .txt, .smi, .ssa, .ass, .psb.
Audio
English: To play sound tracks in English.
French: To play sound tracks in French.
Spanish: To play sound tracks in Spanish.
4:3 Select when a standard 4:3 TV is
Spanish connected.
=
| «А | Displays pictures cropped to fill your
Note ИЕ ( TV screen.
Some DVD video discs may not be played in a Either or both sides of the picture
different language that you selected. A prior are cut off.
language may be programmed on the disc. 16:9 Select when a 16:9 TV is connected
DVD Menu
Notes
English: To display DVD menus in English.
French: To display DVD menus in French.
Spanish: To display DVD menus in Spanish.
* The displayable picture size is preset on the
DVD video disc.
Therefore, the playback picture of some DVD
video discs may not conform to the picture size
you select.
* When you play DVD video discs recorded in the
4:3 picture size only, the playback picture always
appears in the 4:3 picture size regardless of the
TV shape setting.
* If you select “16:9 ” and you own a 4:3 TV set, the
French I
Spanish
Note ; DVD playback picture will be horizontally distorted
Some DVD video discs may not include your during playback. Images will appear to be
pre-selected language. In this case, the DVD video horizontally compressed. Always be sure that your
player automatically displays disc menus consistent TV shape conforms to the actual TV in use.
with the disc's initial language setting. )
24
Customizing the Function Settings(continued)
Setting details
View Mode
The user may select one of the following
options:
Fill: Fill the screen with decoded image.
Original: Display image as its original size.
Height Fit: Fit the screen height with image
height.
Width Fit: Fit the screen width with image
width.
Auto Fit: Automatically fit the decoded image
on screen without distortion.
Pan Scan: Automatically display decoded
image on full screen without
distortion.
Auto Fit
Pan Scan
Pan Scan Select when a standard 4:3 TV
= is connected. Displays pictures
cropped to fill your TV screen.
= ( Either or both sides of the picture
NT
- are cut off.
Auto Fit Automatically fit the decoded
~~. image on screen without
| distortion. Black bars will be
(y ( present on top/bottom or left /
right of screen.
Note
Depending on the DVD discs, you may not be
able to view the mode as selected.
Video Output
TT S-Video В
Component
S-Video : Select if you connect the DVD to TV
(Composite) via composite video (yellow) input or
S-Video input.
Component: Select if you connect the DVD to your
TV which has component video inputs
P-Scan: Select if you connect the DVD to your
(Progressive) TV which has component video inputs
that support progressive scan.
If your TV does not support
progressive scan, distorted picture or
blank screen will appear when “ Yes ”
option is selected.
In this case, just wait for 15 seconds for
auto recovery.
Note
At component and P-Scan modes, there is no
S-Video output.
JPEG Interval
10 Seconds
LEIGH
Off: Plays back one file at a time.
5 Seconds: Plays back images in the form of a
slide show at 5 seconds interval.
10 Seconds: Plays back images in the form of a
slide show at 10 seconds interval.
15 Seconds: Plays back images in the form of a
slide show at 15 seconds interval.
J
25
dnjes uonoun4
Function setup
Digital Output Parental
Selects the output sound format corresponding
. DVD discs equipped with the password function
to your system connection.
are rated according to their content.
The contents allowed by a parental lock level
and the way a DVD disc can be controlled may
vary from disc to disc.
For example, if the disc allowed, you could edit
out violent scenes unsuitable for children and
replace them with more suitable scenes, or you
could lock out playback of the disc altogether.
Off: No digital audio will be output. * DVD video discs may or may not respond to the
PCM: Select when connected to a 2 channel parental lock settings. This is not a defect in the
digital stereo amplifier. The DVD video DVD video player. Make sure this function works
player outputs sound in the PCM 2 with your DVD video discs.
channel format when you play a DVD
video disc recorded on the Dolby Digital, 1) Press SETUP button.
MPEG1 or MPEG2 recording system. 2) Press A / Ybutton to select the Rating.
3) Press» button, then the ENTER button to select
Bitstream: Disc audio bitstream data will be output. the Parental.
Not “Enter Password” screen will appear.
ote
When you make a connection to a TV, Dolby
Surround Pro Logic or stereo system via the
analog audio jacks, select “PCM” or
“Bitstream”.
Night Mode
Night Mode is equivalent to Dynamic Range
Compress. When it is On, it reduces the variation
between loud and soft sounds in audio output. You
can still hear softer sounds and dialog even in very
low volume.
4) Press “8888” using number buttons. (Please
note, this is pre-setting password of this unit.)
Then press ENTER.
Press ENTER again to list the parental level.
The parental lock level is equivalent to the
following
Parentals:
Level 1:Kid Safe
Level 2:G = re
Level 3:PG = 26
Note Level 4:PG-13
Night mode is Dynamic Range Control (DRC) Level 5:PG-R
option for analog audio output. Level 6:R
Level 7:NC-17
| Level 8:Adult
26
Customizing the Function Settings(continued)
Setting details
5) Press 4/ to select the Parental from 1 to
8. Parental one (1) has the most restrictions
while Parental eight(8) can virtually playback all
DVD software.
6) Press OPEN/CLOSE button to activate the
Parental Level setting.
If the DVD disc has been designed to
temporarily cancel the Parental Level, the screen
will change depending on which disc is played.
If you select “ YES ” with the ENTER button,
“ Enter Password ” screen will appear. Input the
4- digit password as you have set then followed
by ENTER button and playback will start. If
“NO ” is selected, press the OPEN/CLOSE
to remove the disc.
Notes
* |f you input wrong password, press CLEAR
button and re-enter your 4-digit password again
* You cannot play DVD discs rated higher than the
level you selected unless you cancel the
parental lock function.
Set Password
New Password can be set to replace the
default password.
1) Press SETUP button.
2)Press 4 / Y button to select the Rating.
3)Press » button, then the 4/ Y button to select
Set Password.
4)Press ENTER button. “Enter Password” screen
Will appear.
5) Press the number buttons to input the current
password (If the password has not been set
yet after you purchase this unit, it is “8888”).
Then press ENTER.
6) Press ENTER button again, “Enter New
Password” screen will appear. Press the
number buttons to input the new password.
7) Press ENTER button. Now your new password
has been set. Be sure to remember this number!
If you forget the password, you can erase
your current password by pressing
number button 8 on the remote control
four times, then press ENTER button to
confirm the setting.
PASSWORD: 8888
Use Default Settings
If you want to return the initial language setting
such as Language, Video, Audio and etc. to the
factory default, select “Yes” from the following
menu.
Notes
* When you reset the DVD video player to the
factory default, the DVD video player will take
3-5 seconds to reset.
* The DVD video player can also be reset to the
factory default by pressing the STOP button on
the front panel for 5 seconds in tray OPEN
mode.
DivX Registration
Some DivX” Video-On-Demand files require
registration code, please get the code of your
DVD video player as follow:
Note
This registration code is for DivX* Video-On-
Demand only. Do not apply this code for other
applications or websites.
27
dnjes uolnoun4
Function setup
Ш able of Languages
| Table of languages and their abbreviations
Abbreviation
Language
CHI (ZH)
DUT (NL)
ENG (EN)
FRE (FR)
GER (DE)
ITA (IT)
JPN (JA)
KOR (KO)
MAY (MS)
SPA (ES)
No alternate
language
Chinese
Dutch
English
French
German
Italian
Japanese
Korean
Malay
Spanish
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Belorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
Bhutani
Greek
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Irish
Scottish Gaelic
Galician
28
Abbreviation | Language
GN Guarani
GU Gujarati
HA Hausa
HI Hindi
HR Croatian
HU Hungarian
HY Armenian
IA Interlingua
IE Interlingue
IK Inupiak
IN Indonesian
IS Icelandic
IW Hebrew
Jl Yiddish
JW Javanese
KA Georgian
KK Kazakh
KL Greenlandic
KM Cambodian
KN Kannada
KS Kashmiri
KU Kurdish
KY Kirghiz
LA Latin
LN Lingala
LO Laotian
LT Lithuanian
LV Latvian, Lettish
MG Malagasy
MI Maori
MK Macedonian
ML Malayalam
MN Mongolian
MO Moldavian
MR Marathi
MT Maltese
MY Burmese
NA Nauru
NE Nepali
NO Norwegian
OC Occitan
OM (Afan) Oromo
OR Oriya
PA Panjabi
PL Polish
PS Pashto, Pushto
Abbreviation | Language
PT Portuguese
QU Quechua
RM Rhaeto-Romance
RN Kirundi
RO Rumanian
RU Russian
RW Kinyarwanda
SA Sanskrit
SD Sindhi
SG Sango
SH Serbo-Croatian
Si Singhalese
SK Slovak
SL Slovenian
SM Samoan
SN Shona
SO Somali
SQ Albanian
SR Serbian
SS Siswati
ST Sesotho
SU Sundanese
SV Swedish
SW Swahili
TA Tamil
TE Telugu
TG Tajik
TH Thai
TI Tigrinya
TK Turkmen
TL Tagalog
TN Setswana
TO Tongan
TR Turkish
TS Tsonga
TT Tatar
TW Twi
UK Ukrainian
UR Urdu
UZ Uzbek
VI Vietnamese
VO Volapük
WO Wolof
XH Xhosa
YO Yoruba
ZU Zulu
Before Calling Service Personnel
‘ Check the following guide for the possible cause of a problem contacting service.
Symptoms and correction
Symptom Cause Correction
No power. * The power plug is disconnected. | * Connect the power plug securely into
the wall outlet. :
The DVD video * The automatic power off function | * Press the PLAY button.
player turned off
by itself.
turned the unit off.
No picture or
abnormal color
(pinkish, greenish,
etc.).
* The TV is not set to receive DVD
signal output.
* Select the appropriate video input mode
onthe TV so the picture from the DVD
video player appears on the TV screen.
» Mismatch setting between TV
and this unit.
* Select the correct Video Output setting.
* Wrong connection.
* Check the connection.
* PROGRESSIVE button is
pressed on a TV equipped with
component video input jacks
but does not support progressive
scan.
* Press PROGRESSIVE button to turn
off progressive mode.
No sound. * The equipment connected with * Select the correct input mode of the
the audio cable is not set to audio receiver so you can listen to the
receive DVD signal output. sound from the DVD video player.
* The audio cable is not * Connect the audio cable securely into
connected securely. the appropriate jacks.
* The audio receiver or TV is * Turn on the equipment connected with
turned off. the audio cable.
* The setting of output sound * Select the proper audio setting.
format is incorrect.
The playback * The disc is dirty. * Remove the disc and clean it.
picture has * Itis in fast forward or fast reverse | * Sometimes a small amount of picture
ocasiona playback. distortion may appear. This is not a
malfunction.
Brightness is
unstable or noises
are present in the
playback pictures.
* The effect of copy protection.
* Connect the DVD video player directly to
the TV. Avoid connecting the DVD
video player to a VCR or TV/VCR
combination.
29
O
e
=
D
=x
w
Others
30
Symptom Cause Correction
The DVD video * No disc is inserted. * Insert a disc.
player does not | An unplayable disc is inserted. * Insert a playable disc. (Check the disc
start playback.
type and color system.)
* The disc is placed upside down.
* Place the disc with the playback side
down.
* The disc is not placed within the
guide.
* Place the disc correctly inside the
guide on the disc tray.
* The disc is dirty.
* Clean the disc.
* The parental lock function is set.
* Cancel the parental lock function or
change the parental lock level.
Playback does not
follow the course
of the disc's
program.
* |tis in the mode of repeat
playback, memory
playback, etc.
* These operations may prevent a proper
progress of the contents.
Buttons do not
work.
* Power supply fluctuations or other
abnormalities such as static
electricity may interrupt correct
operations.
* Press and hold the ON/STANDBY
button on the front panel for more than
about 3 seconds. The DVD video player
turns off. Press the button again to turn
it on. If the buttons still do not work,
disconnect the power plug and insert it
into the wall outlet again
The remote The remote control is not pointed | ¢ Point the remote control at the remote
control does not at the remote sensor of the DVD sensor of the DVD video player.
work properly. video player.
* The remote control is too far from | ¢ Operate the remote control within
the DVD video player. about 7 m.
* The batteries in the remote « Replace the batteries with new ones.
control are exhausted.
The logo and * Adjust contrast too small or too * Adjust Brightness or Contrast to a
playing picture of | large. certain level
DVD player
become poor.
The DVD player
tray does not
open.
Tray Lock mode has been enable.
* Disable the Tray Lock function.
- Specifications
| DVD Video player/outputs/supplied accessories
DVD Video player
Power supply 120 V AC, 60 Hz
Power consumption 8W
Mass 1.55kg
External dimensions
431 x 40 x 199 mm (W/H/D)
Signal system
Standard NTSC
Laser
Semiconductor laser, wavelength 650/780 nm
Frequency range
48 kHz sampling 4 Hz to 22 kHz
96 kHz sampling 4 Hz to 44 kHz
DVD linear sound:
Signal-to-noise ratio
More than 100 dB
Audio dynamic range
More than 93 dB
Harmonic distortion
Less than -70dB
Wow and flutter
Below measurable level (less than +0.001 % (W.PEAK))
Operating conditions
Temperature: 5 °C to 35 °C, Operation status: Horizontal
Outputs
Video output 1.0 V (p-p), 75 Q, negative sync., pin jack x 1
S Video output (Y) 1.0 V (p-p), 75 Q , negative sync., Mini DIN 4-pin x 1
(C) 0.286 V (р-р), 759
Component video output
(Y) 1.0 V (p-p), 75 Q, negative sync., pin jack x 1
(Ps )/(Pa ) 0.7 V (p-p), 7592, pin jack x 2
Audio output (COAXIAL DIGITAL)
0.5V (p-p), 759, pin jack x 1
Audio output (ANALOG)
2.0 V (rms), 680%, pin jacks (L, R) x 1
Supplied Accessories
Audio/video cable
Remote control (SE-R0213)
Batteries (AAA) .
* This model complies with the above specifications.
* Designs and specifications are subject to change without notice.
* This model may not be compatible with features and/or specifications that may be added in the future.
31|
©
re
=
D
-~
w
Others
Limited United States Warranty
Digital Audio Video ("DAV") Product - Exchange Warranty
Toshiba America Consumer Products, L.L.C. ("TACP") makes the following limited warranties to original
consumers in the United States.
THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON
RECEIVING THIS DAV PRODUCT AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO
NO OTHER PURCHASER OR TRANSFEREE.
DAV PRODUCTS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING,
WITHOUT LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.
DAV PRODUCTS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION,
CANADA AND MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES.
Limited Warranty
TACP warrants this DAV Product and its parts against
defects in materials or workmanship for a period of
ninety (90) days after the date of original retail
purchase.
DURING THIS PERIOD, TACP WILL EXCHANGE A
DEFECTIVE DAV PRODUCT WITH A NEW OR
REFURBISHED DAV PRODUCT WITHOUT CHARGE
TO YOU. DURING THE PERIOD THAT
COMMENCES ON THE DATE THAT IS NINETY
ONE (91) DAYS AFTER THE DATE OF ORIGINAL
RETAIL PURCHASE AND ENDS ON THE DATE
THAT IS THREE HUNDRED SIXTY FIVE (365) DAYS
AFTER THE DATE OF ORIGINAL RETAIL
PURCHASE, TACP WILL EXCHANGE A DEFECTIVE
DAV PRODUCT WITH A NEW OR REFURBISHED
DAV PRODUCT FOR A FEE.
Rental Units
The warranty for DAV Product rental units begins on
the date of the first rental or thirty (30) days after the
date of shipment to the rental firm, whichever comes
first.
Commercial Units
DAV Products sold and used for commercial purposes
have a limited warranty for all parts and labor, which
warranty begins on the date of original retail purchase
and ends on the date that is ninety (90) days thereafter.
Owner's Manual and Product Registration Card
Read this owner's manual thoroughly before operating
this DAV Product. Complete and mail the enclosed
product registration card or register your DAV Product
on-line at www.tacp.toshiba.com/service as soon as
possible. By registering your DAV Product you will
enable TACP to bring you new products specifically
designed to meet your needs and help us to contact
you in the unlikely event a safety notification is
required under the U.S. Consumer Product Safety Act.
Failure to complete and return the product registration
card does not diminish your warranty rights.
132
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE
FOLLOWING CONDITIONS:
(1) You must retain your bill of sale or provide other
proof of purchase.
(2) All warranty servicing of this DAV Product must be
made pursuant to the TACP DAV Product Warranty
Exchange Program.
(3) The warranties from TACP are effective only if the
DAV Product is purchased and operated in the
Continental U.S.A. or Puerto Rico.
(4) Labor service charges for set installation, setup,
adjustment of customer controls, and installation or
repair of antenna systems are not covered by this
warranty. Reception problems caused by
inadequate antenna systems are your responsibility.
Warranties extend only to defects in materials or
workmanship as limited above, and do not extend
to any DAV Product or parts that have been lost or
discarded by you or to damage to the DAV Product
or parts caused by fires, misuse, accident, Acts of
God (such as lightning or fluctuations in electric
power), improper installation, improper maintenance,
or use in violation of instructions furnished by TACP;
use or malfunction through simultaneous use of this
DAV Product and connected equipment; or to units
that have been modified or had the serial number
removed, altered, defaced, or rendered illegible.
How to Obtain Warranty Services No person, agent, distributor, dealer, or company is
If, after following all of the operating instructions in this authorized to change, modify, or extend the terms of
manual and checking the section "Before Calling these warranties in any manner whatsoever. The time
Service Personnel," you find that service is needed: within which an action must be commenced to enforce
any obligation of TACP arising under the warranty or
(1) For instructions on how to obtain warranty service for Under any statute or law of the United States or any
your DAV Product under the TACP DAV Product state thereof is hereby limited to ninety (90) days from
Warranty Exchange Program, contact TACP's the date you discover, or should have discovered, the
Consumer Solutions Center toll free at defect. This limitation does not apply to implied warranties
1-800-631-3811. arising under state law.
(2) You must include the original bill of sale (or a copy
of the original bill of sale) or other proof of purchase
along with the entire DAV Product when sending THIS WARRANTY GIVES YOU SPECIFIC LEGAL
Center specified by TACP's Consumer Solutions FIGHTS AND YOU MAY ALSO HAVE OTHER
Center. You are os onsible for all inbound RIGHTS WHICH MAY VARY FROM STATE TO
transportation and Insurance charges for the DAV STATE IN THE U.S.A. SOME STATES OF THE
9 U.S.A. DO NOT ALLOW LIMITATIONS ON HOW
Product to the TACP Warranty Exchange Center. LONG AN IMPLIED WARRANTY LASTS, WHEN AN
ACTION MAY BE BROUGHT, OR THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR
www.tacp.toshiba.com CONSEQUENTIAL DAMAGES, SO THE ABOVE
PROVISIONS MAY NOT APPLY TO YOU UNDER
ALL WARRANTIES IMPLIED BY THE LAW OF SUCH CIRCUMSTANCES.
ANY STATE OF THE U.S.A., INCLUDING THE
IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE,
ARE EXPRESSLY LIMITED TO THE DURATION
OF THE LIMITED WARRANTIES SET FORTH
ABOVE. WITH THE EXCEPTION OF ANY
WARRANTIES IMPLIED BY THE LAW OF ANY
STATE OF THE U.S.A. AS HEREBY LIMITED,
THE FOREGOING WARRANTY IS EXCLUSIVE
AND IN LIEU OF ALL OTHER WARRANTIES,
GUARANTEES, AGREEMENTS, AND OF ALL
OTHER WARRANTIES, GUARANTEES,
AGREEMENTS, AND OR REPLACEMENT OF
ANY PARTS. IN NO EVENT SHALL TACP BE
LIABLE FOR CONSEQUENTIAL OR INCIDENTAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO,
LOST PROFITS, BUSINESS INTERRUPTION, OR
MODIFICATION OR ERASURE OF RECORDED
DATA CAUSED BY USE, MISUSE OR INABILITY
TO USE THIS DAV PRODUCT).
©
~~
=
D
<
w
For additional information, visit TACP's website:
33
Limited Canadian Warranty For Toshiba Brand DVD Players, DVD Recorders,
DVD/VCR Combo Players and Portable DVD Players
Toshiba of Canada Limited ("TCL") makes the following
limited warranties to original consumers in Canada.
THESE LIMITED WARRANTIES EXTEND TO THE
ORIGINAL CONSUMER PURCHASER OR ANY
PERSON RECEIVING THIS TOSHIBA BRAND DVD
PLAYER, DVD RECORDER, DVD/VCR COMBO
PLAYER OR PORTABLE DVD PLAYER (the
"PLAYER(S)" or "Player(s)") AS A GIFT FROM THE
ORIGINAL CONSUMER PURCHASER AND TO NO
OTHER PURCHASER OR TRANSFEREE.
PLAYERS PURCHASED IN CANADA, AND USED
ANYWHERE QUTSIDE OF CANADA INCLUDING,
WITHOUT LIMITATION, THE UNITED STATES AND
MEXICO, ARE NOT COVERED BY THESE
WARRANTIES.
PLAYERS PURCHASED ANYWHERE OUTSIDE OF
CANADA, INCLUDING, WITHOUT LIMITATION, THE
UNITED STATES AND MEXICO, AND USED IN
CANADA, ARE NOT COVERED BY THESE
WARRANTIES.
Limited One (1) Year Warranty on Parts and Labour
(home/non-commercial use)
Subject to the more limited warranty if the Player is used
for any commercial or business purposes as set out
below, TCL warrants the Player and its parts against
material defects in materials or workmanship that result in
the Player failing for a period of one (1) year after the
date of original retail purchase. DURING THIS PERIOD,
“TCL WILL, AT TCLS OPTION, REPAIR OR REPLACE
A DEFECTIVE PART WITH A NEW OR REFURBISHED
PART, WITHOUT CHARGE TO YOU FOR PARTS OR
LABOUR. YOU MUST DELIVER THE ENTIRE PLAYER
TO THE CLOSEST TCL DESIGNATED DVD PLAYER,
DVD RECORDER, DVD/VCR COMBO PLAYER OR
PORTABLE DVD PLAYER AUTHORIZED SERVICE
DEPOT ("ASD"). YOU MUST PAY FOR ALL
TRANSPORTATION AND INSURANCE CHARGES
FOR THE PLAYER TO AND FROM THE ASD.
Rental Units
The warranty for Player rental units begins with the date
of first rental or thirty (30) days from the date of shipment
to the rental firm, whichever comes first.
Limited Warranty for Commercial Units
TCL warrants Players that are used for any commercial
or business purposes as follows: all parts are warranted
against material defects in materials or workmanship that
result in the Player failing for a period of ninety (90) days
after the date of original retail purchase. DURING THIS
PERIOD, TCL WILL, AT TCL'S OPTION, REPAIR OR
REPLACE A DEFECTIVE PART WITH A NEW OR
REFURBISHED PART, WITHOUT CHARGE TO YOU
FOR PARTS OR LABOUR. YOU MUST DELIVER THE
ENTIRE PLAYER TO THE CLOSEST ASD. YOU MUST
PAY FOR ALL TRANSPORTATION AND INSURANCE
CHARGES FOR THE PLAYER TO AND FROM THE
ASD.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO
THE FOLLOWING CONDITIONS:
(1) You must provide your bill of sale or other proof
of purchase.
(2) All warranty servicing of this Player must be
performed by a Toshiba Factory Service Depot.
(3) The warranties from TCL are effective only if the
Player is (i) purchased as new and unopened
34
from TCL or from TCL’s authorized distributors, dealers
or resellers ("ADR's") and (ii) located/operated in
Canada.
(4) Warranties extend only to material defects in materials
or workmanship as limited above, and do not extend
to:
a. Service, repairs or replacement made necessary
by accident, misuse, abuse, moisture, liquids,
dust, dirt, neglect, accident, damage, 24/7
applications, improper installation, improper
operation, improper cleaning, improper
maintenance, normal wear and tear, or any other
external cause or event, act or omission outside
the control of TCL, including fire, theft, acts of
God, alteration, power failures, power surges or
power shortages, lightning, other electrical faults,
or repairs, modifications or replacements by
persons other than those authorized by TCL to
service the Player,
b. Replacement of missing, discarded or lost parts,
the provision of retrofits, or preventive
maintenance;
c. Repair of damage that is cosmetic only or does
not affect the Player functionality, such as wear
and tear, scratches and dents;
d. Service on Toshiba-branded accessory items
(such accessory items may be covered by their
own warranty);
e. Service on third party products or service made
necessary by use of incompatible third party
products;
f. Service made necessary by the simultaneous
use of this Player and connected equipment;
g. Modifications to the Player not approved in writing
by TCL, and service made necessary by the use
or installation of non- Toshiba modifications to the
Player;
h. Service of a Player on which the TOSHIBA label
or logo, rating label or serial number have been
defaced or removed;
i. On-site service and repair of the Player;
j. Damage to the Player caused by failure to follow
the specifications, User manuals or guides as to
usage and/or storage.
Disclaimer and Limitation of Remedy
TO THE EXTENT NOT PRECLUDED BY LAW, ALL
OTHER EXPRESS AND IMPLIED WARRANTIES,
CONDITIONS AND REPRESENTATIONS FOR THIS
PLAYER, INCLUDING THE IMPLIED WARRANTIES
AND CONDITIONS OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE
HEREBY DISCLAIMED AND EXCLUDED. IF THE
APPLICABLE LAW, STATUTORY OR OTHERWISE,
PRECLUDES THE EXCLUSION OF ANY IMPLIED
WARRANTIES, CONDITIONS AND REPRESENTATIONS
THEN SUCH IMPLIED WARRANTIES, CONDITIONS
AND REPRESENTA-TIONS ARE OTHERWISE LIMITED
IN DURATION TO THE TERM OF THIS EXPRESS
WRITTEN LIMITED WARRANTY. TO THE EXTENT NOT
PRECLUDED BY LAW, THIS WRITTEN WARRANTY
SUPERCEDES AND SPECIFICALLY DISCLAIMS ANY
OTHER WARRANTY, CONDITION OR REPRE-
SENTATION NOT STATED IN THIS WARRANTY,
WHETHER MADE BY TCL, TOSHIBA CORPORA-TION,
THEIR AFFILIATES, ADRs AND ASDs AND WHETHER
MADE ORALLY OR IN WRITING (INCLUDING ANY
STATEMENT IN ANY BROCHURE, PRESS RELEASE,
ANNOUNCEMENT, ADVERTISE-MENT, POINT OF
SALE DISPLAY, ETC.).
YOU MUST READ AND FOLLOW ALL SET-UP AND
USAGE INSTRUCTIONS IN THE APPLICABLE USER
- GUIDES AND/OR MANUALS. IF YOU FAIL TO DO SO,
THIS PLAYER MAY NOT FUNCTION PROPERLY AND
YOU MAY SUFFER DAMAGE. THIS WARRANTY WILL
NOT COVER ANY SERVICE THAT IS REQUIRED, IN
PART OR IN WHOLE, AS A RESULT OF ANY FAILURE
TO FOLLOW THE SET-UP AND USAGE INSTRUC-
TIONS. THIS WARRANTY DOES NOT APPLY AND
SHALL BE VOID AND UNENFORCEABLE IF THE
PLAYER IS OPENED, SERVICED, OR REPAIRED BY
PERSONS OTHER THAN THOSE AUTHORIZED BY
TCL TO SERVICE OR REPAIR THE PLAYER.
IF THE PLAYER FAILS TO WORK AS WARRANTED
ABOVE, YOUR SOLE AND EXCLUSIVE REMEDY
SHALL BE REPAIR OR REPLACEMENT OF THE
DEFECTIVE PART. IN NO EVENT WILL TCL, TOSHIBA
CORPORATION, THEIR AFFILIATES, ADRs OR ASDs
(THE "RELATED PARTIES") BE. LIABLE TO YOU OR
ANY THIRD PARTY FOR ANY DAMAGES, MONEY,
REIMBURSEMENT, COSTS OR EXPENSES. THIS
LIMITATION APPLIES TO DAMAGES, MONEY,
REIMBURSEMENT, COSTS OR EXPENSES OF ANY
KIND WHATSOEVER INCLUDING ANY DIRECT OR
INDIRECT DAMAGES, DAMAGE TO PROPERTY OR
PERSON, LOST PROFITS, LOST SAVINGS,
INCONVENIENCE OR OTHER SPECIAL, INCIDENTAL,
EXEMPLARY OR CONSEQUENTIAL DAMAGES,
WHETHER FOR BREACH OF WARRANTY, BREACH
OF CONTRACT, TORT (INCLUDING NEGLIGENCE),
UNDER A STATUTE OR UNDER ANY OTHER LAW
OR FORM OR ACTION, OR WHETHER ARISING OUT
OF THE USE OF OR INABILITY TO USE THE PLAYER,
EVEN IF ANY OF THE RELATED PARTIES HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
OR OF ANY CLAIM BY ANY OTHER PARTY.
No person, agent, distributor, dealer or company is
authorized to change, modify or extend the terms of
these warranties in any manner whatsoever.
Arbitration and Dispute Resolution
To the extent not preciuded by law, any claim, dispute,
controversy or disagreement (whether for breach of
warranty, breach of contract, tort (including negligence),
under a statute or under any other law or form of action)
against any of the Related Parties arising out of, or
otherwise relating to: (i) this warranty; (ii) the Player;
(iii) any oral or written representations, statements,
brochures, press releases, advertising, announcement,
point of sale display, or promotional material relating to
the Player; (iv) the relationships that result from this
warranty, (the foregoing claims, disputes controversies
and disagreements are collectively referred to as the
"Dispute"), shall be referred to and resolved by final and
binding arbitration (to the exclusion of the courts). To the
extent not precluded by law, you agree to waive any right
that you may have to commence or participate in any
representative or class proceeding against the Related
Parties relating to any Dispute. If and where applicable
and to the extent not precluded by law, you further agree
to opt out of any such representative or class proceedings.
Arbitration of any Dispute will be conducted in the forum
and in the manner as agreed to between you and TCL.
Failing such agreement, the arbitration will be conducted
by one arbitrator pursuant to the laws and rules relating to
arbitration generally in force in the jurisdiction in which
you reside at the time that the Dispute arises. To the
extent not precluded by law, no claim, dispute,
controversy or disagreement of any other person may be
joined or combined with any Dispute by you, without the
prior written consent of TCL.
Critical Applications
The Player you have purchased is not designed for any
“critical applications.” “Critical applications” means life
support systems, medical applications, connections to
implanted medical devices, commercial transportation,
nuclear facilities or systems or any other applications
where Player failure could lead to injury to persons or
loss of life or catastrophic property damage.
IF THE CUSTOMER USES THE PLAYER IN ANY
CRITICAL APPLICATION, THE CUSTOMER — AND
NOT TCL, ITS AFFILIATES, ADRs OR ASDs — ASSUME
SOLE AND FULL RESPONSIBILITY FOR SUCH USE.
TCL RESERVES THE RIGHT TO REFUSE TO SERVICE
ANY PLAYER USED IN A CRITICAL APPLICATION.
TCL, ITS AFFILIATES, ADRs AND ASDs HEREBY
DISCLAIM ANY AND ALL LIABILITY, DAMAGES AND
©
+
=
oD
TA
w
. CONSEQUENCES ARISING QUT OF THE SERVICE OR
REFUSAL TO SERVICE SUCH PLAYER AND FURTHER
DISCLAIM ANY AND ALL LIABILITY, CONSEQUENCES
AND DAMAGES THAT MAY ARISE OR RESULT FROM
THE USE OF THE PLAYER IN ANY CRITICAL
APPLICATIONS.
General Provisions
If and to the extent that any provision of this limited
warranty shouid generally be found to be unenforceable,
the unenforceable provision shall be severed from the
warranty and deemed not to form part of the warranty.
The remaining provisions of this warranty shall be and
remain valid and enforceable. If and to the extent that any
provision of this limited warranty as it relates to any of the
Related Parties is found to be invalid or unenforceable in
respect of that party (the "Excluded Party"), the Excluded
Party shall be deemed to be severed or excluded from the
provision, and the provision shall remain valid, enforceable
and applicable in respect of the other or remaining
Related Parties.
To the extent permitted by law, this limited warranty shall
be governed and construed in accordance with the laws
of Ontario.
If there is any inconsistency between this limited warranty,
on the one hand, and any statement in the packaging of
the Player or in any other document enclosed with, or
used in the context of the promotion or sale of, the Player,
on the other hand, the provisions of this limited warranty
shall prevail.
How to Obtain Warranty Services
If, after following all of the operating instructions in this
manual and checking the “Before Calling Service
Personnel” section, you find that service is needed:
(1) To find the nearest TCL Authorized Service Depot,
visit TCL's web site at www.toshiba.ca, or call toll
free 1-866-275-6372.
(2) Present your bill of sale or other proof of purchase to
the Toshiba Factory Service Depot.
For additional information, visit TCL's website:
www.toshiba.ca
35
TOSHIBA
Printed in China
TSDAC10049A
70% Recycle paper
TOSHIBA
REPRODUCTOR DE DVD SD-4000KU
Referencia rápida
22 (5; (Es Pres edts
VIDEO DIGITAL VIDEO DIGITAL AUDIO Digital Out
PRECAUCIONES DE SEGURIDAD
AMI | El símbolo de rayo con cabeza de flecha, dentro de un
RISK OF ELECTRIC SHOCK á h
DO NOT OPEN ;
triángulo equilátero, tiene como fin indicar al usuario la
presencia de “tensión peligrosa” no aislada dentro de la
AVIS RISQUE DE CHOC ELECTRIQUE NE
PAS QUVRIR
WARNING : TO REDUCE THE RISK OF
unidad del producto, que puede ser de magnitud suficiente
ELECTRIC SHOCK. DO NOT REMOVE | El signo de exclamación dentro de un triángulo equilátero
como para constituir un riesgo de electrocución de personas.
COVER (OR BACK). NO USERSERVICEABLE tiene como fin indicar al usuario la presencia de instrucciones
PARTS INSIDE. REFER SERVICING TO import ió ntenimiento (renaració
QUALIFIED SERVICE PERSONNEL. MPO antes de operacion y mante o (rep lon) en
la literatura que acompaña al producto.
Símbolo para CLASE H (Aislamiento doble)
ADVERTENCIA: PARA REDUCIR EL RIESGO DE INCENDIOS O DE ELECTROCUCIÓN, NO EXPONGA
ESTE PRODUCTO A LA LLUVIA NI A LA HUMEDAD. EN EL INTERIOR DE LA UNIDAD
EXISTEN ALTAS TENSIONES PELIGROSAS. NO ABRA LA UNIDAD. EN CASO DE AVERÍA
SOLICITE LOS SERVICIOS DE PERSONAL CALIFICADO SOLAMENTE.
PRECAUCIÓN: PARA EVITAR DESCARGAS ELÉCTRICAS, HAGA COINCIDIR LA CUCHILLA ANCHA
DEL ENCHUFE CON LA RANURA ANCHA DEL TOMACORRIENTE, E INSERTELO
COMPL ETAMENTE.
PRECAUCIÓN: Este reproductor de videodiscos digitales utiliza un sistema de láser.
Para asegurar la utilización adecuada de sete producto, lea cuidadosamente este manual
de instruccioness y consérvelo para futuras referencias. Cuando la unidad requiera
mantenimiento, póngase en contacto con un centro de reparaciones autorizado - consulte el
procedimiento de servicio.
La utilización de controles, ola realización de ajustes o procedimientos diferentes a los
especificados puede resultar en exposción peligrosa a la radiación.
Para evitar la exposición directa al láser, no intente abrir la unidad.
Si abre la unidad y anula el interbloqueo, quedará expuesto a radiación láser visible e invisble.
NO MIRE EL HAZ.
AVISO DE LA FCC: Este equipo ha sido probado y se ha encontrado que cumple con los límites para dispositivos
digitales de Clase B, de acuerdo con la parte 15 de las normas de la FCC, Estos límites han
sido diseñados para proporcionar una protección razonable contra interferencias perjudiciales
en una instalación residencial. Este equipo genera, utiliza, y puede radiar energía de
radiofrecuencia y, si no se instala y utiliza de acuerdo con las instrucciones, puede causar
interferencias perjudiciales en las radiocomunicaciones. Sin embargo, no existe ninguna
garantía de que tales interferencias no se produzcan en una instalación particular.
Si este equipo causa interferencias perjudiciales, lo que podrá determinarse desconectando
y volviendose a conectar, se ruega que el usuario corrija las interferencias tomando una o
más de las medidas siguientes:
- Reorientación o reubicación de la antena receptora.
- Aumento de la separación entre el equipo y el receptor.
- Conexión del equipo a un tomacorriente diferente del utilizado por el receptor.
- Solicitud de ayuda al proveedor 0 a un técnico de radio/televisión experimentado.
Por cambios o modificaciones realizados en este equipo, no aprobados expresamente por
Toshiba, o por concesionarios autorización por Toshiba, pueden anular la autorización
para utilizar el equipo.
INSTRUCCIONES IMPORTANTES SOBRE SEGURIDAD
PRECAUCIÓN: LEA Y OBSERVE CUIDADOSAMENTE TODAS LAS ADVERTENCIAS E INSTRUCCIONES OFRECIDAS
EN ESTE MANUAL DE INSTRUCCIONES, Y LAS MARCADAS EN LA UNIDAD. GUARDE ESTE
MANUAL PARA FUTURAS REFERENCIAS.
Este aparato ha sido diseñado y fabricado para asegurar la seguridad personal. La utilización inadecuada podría resultar
en descargas eléctricas o en incendios. Las normas de seguridad incorporadas en esta unidad le protegerán si observa los
procedimientos siguientes para la instalación, la utilización, y el mantenimiento.
Esta unidad está completamente transistorizada, y no contiene piezas que pueda reparar el usuario.
NO QUITE LA CUBIERTA DE LA UNIDAD, PORQUE PODRÍA QUEDAR EXPUESTO A TENSIONES PELIGROSAS. EN
CASO DE AVERIA, SOLICITE LOS SERVICIOS DE PERSONAL DE REPARACIÓN CALIFICADO SOLAMENTE.
1. Lea estas instrucciones.
2. Guarde estas instrucciones.
3, Tenga en cuenta todas las advertencias.
4. Siga todas las instrucciones.
5. No utilice este aparato cerca del agua.
6. Limpiar únicamente con paños secos.
7. No bloquee ninguna de las aberturas de ventilación del
aparato. Instálelo de acuerdo con las instrucciones del
fabricante.
8. El aparato deberá colocarse alejado de fuentes térmicas,
tales como radiadores, salidas de aire cálido, estufas, y
demás aparatos (incluyendo amplificadores) que
produzcan calor.
9. No anule el terminal de seguridad del enchufe polarizado
o de tipo de puesta a terminal. Un enchufe polarizado
tiene dos cuchillas, una cuchilla más ancha que la otra.
Un enchufe de tipo de puesta a tierra tiene dos cuchillas
y una tercera espiga de puesta a tierra. La cuchilla ancha
o la tercera espiga han sido previstas para su seguridad.
Si el enchufe proporcionado no se puede insertar
completamente en el tomacorriente, póngase en contacto
con un electricista para que reemplace su tomacorriente
obsoleto. |
10. Proteja el cable de alimentación para que no sea pisado
o estrujado particularmente en la parte de los
tomacorrientes, de los prolongadores de enchufes y en
el punto en el que sale del aparato.
11. Utilice solamente las fijaciones/accesorios especificados
por el fabricante.
12. Utilice solamente el carrito, estante,
trípode, soporte, o mesa recomendado
por el fabricante, o vendido con el
aparato. Cuando utilice un carrito,
tenga cuidado al mover la
combinación de aparato y carrito
para no volcario evitando así daños
serios.
13. Desenchufe este aparato durante las tormentas eléctricas
o cuando no lo vaya a utilizar durante mucho tiempo.
14. Solicite los servicios de personal de reparación calificado.
Requiera servicio de reparación de cualquier manera que
el aparato haya sido dañado, por ejemplo, cuando el cable
o el enchufe de alimentación se haya dañado, si se ha
vertido líquido sobre el aparato, o si en el interior del mismo
han caído objetos, si el aparato ha estado expuesto a la
lluvia o al agua, si el aparato no funciona normalmente o si
el aparato se ha caído.
INSTRUCCIONES ADICIONALES SOBRE SEGURIDAD
15. Cuando utilice auriculares, mantenga el volumen a un
nivel moderado. Si utilizase auriculares continuamente
a gran volumen, podría dañar sus oídos.
16. No sobrecar gue los tomacorrientes, cables
prolongadores, ni prolongadores de tomacorrientes, ya
que esta podría resultar en el riesgo de incendios
descargas eléctricas.o
17. No se debe exponer el aparato a goteo o salpicaduras
y no se deben poner objetos llenos de líquido, tales
como floreros,sobre el aparato.
18. Mantenga los dedos alejados de la bandeja del disco
cuando cierre ésta. La bandeja podría causar serios
daños personales.
19. No coloque objetos pesados sobre el aparato ni se
suba en él. El objeto podría caerse, causando
daños personales serios y el aparato podría averiarse
seriamente.
20.No utilice discos rajados, deformados, ni reparados.
Estos discos podrían romperse fácilmente y causar
daños personales serios y el mal funcionamiento dei
aparato.
21.Si saliera humo u olor del aparato, desconecte
inmediatamente el cable de alimentación del tomacorriente
de la red. Espere hasta que deje de haber humo u olor,
entonces requiera un chequeo y reparación a su
distribuidor. Si no lo hiciera podría ocasionar un incendio.
22. No toque los cables de conexión o el aparato mientras
está tronando.
23. El aparato incluye plomo, un ingrediente de soldadura
usado en el tablero de circuitos impresos, que es una
sustancia perjudicial al ser humano y al medio ambiente.
Al deshacerse de este aparato, siga las reglas y las
regulaciones en su área.
| Conexion a un televisor
| Cable de video S(no suministrado)
a un tomacorriente
delared —
(120V CA, 60Hz)
Cable de auionideo |
(suministrado)
a la entradas
de video
a las entradas de audio
DTS y DTS Digital Out son marcas de
DTS, Inc.
a a salida
ea E в =, S VIDEO
a salida AUDIO a salida
ANALOGO VIDEO
Si el televisor posee entrada de video S, conecte
el reproductor de DVD con un cable de video S, —
Cuando utilice un cable de video S, no conecte el |
cable de video amarillo.
(amarilla)
(blanca)
a la entrada de video S
u
СЕН
Televisor o monitor con
entradas de audio/video
| Insercion de las pilas |
| Reproduccion basica
A propósito de las ilustracines del compartimiento de pilas
Hay dos tipos de compartimiento de pilas en los
controladores remotos proporcionados. (Esto no significa que
haya diferencia en el funcionamiento de los mismos.) Vea una
u otra ilustración según su controlador remoto actual.
Abra la tapa del
compartimiento.
Inserte las pilas
(tamaño AAA).
Cerciórese de que+ y -
de las pilas coincidan
con las marcas del
interior del
compartimiento de las
mismas.
3 Cierre la tapa del compartimento.
Apunte con el controlador remoto hacia el
sensor de control remoto y presione los botones.
Distancia: Unos 7 m (23 feet) de la parte frontal del sensor
de control remoto:
Unos 30* en cada sentido de la parte frontal del
controlador remoto
Ángulo:
-
Presione POWER.
El reproductor DVD se encenderá.
Presione OPEN/CLOSE.
La bandeja del disco se abrirá.
Coloque el disco sobre la bandeja del
disco.
Con la cara de
reproducción hacia
abajo.
Presione OPEN/CLOSE para cerrar la
bandeja del disco.
La reproducción comenzará.
4
Reproducción básica(continuación) | | Reproducción fotograma tras fotograma
IN Para realizar una pausa en la reproducción
(reproducción de imagen fija)
Presione PAUSE/STEP durante la reproducción.
PAUSE/STEP Para reanudar la reproducción normal,
presione el botón PLAY.
* Durante la reproducción de imagen fija,
el sonido estará silenciado.
M Para parar la reproducción
Presione STOP.
STOP
| Reproducciôn rápida en sentido avanzando o retrocediendo |
Presione REV o FWD durante la reproducción.
REV
REV: Reproducción rápida retrocediendo
FWD: Reproducción rápida avanzando
FWD
la velocidad de reproducción cambiará.
EM Para reanudar lareproducción normal
Presione PLAY.
PLAY
Cada vez que presione el botón REV o FWD,
| = Localización de un título utilizando el menú principal
7
Presione TOP MENU.
En la pantalla del televisor aparecerá el
menú principal.
Ej.
TOP MENU
y
Presione 4/ Y/ </ » para seleccionar el
título deseado.
7 > Silos titulos del menü principal tienen
asignado un nümero, usted podrä
localizar directamente un titulo
especifico introduciendo el nümero
asignado con los botones numéricos.
Presione ENTER.
La reproducción se iniciará desde el capítulo 1 del título
seleccionado.
Presione PAUSE/STEP durante la reproducción
de imagen fija.
PAUSE/STEP Cada vez que presione el botón PAUSE/STEP,
1 las imägenes avanzaran un fotograma.
Para reanudar la reproducción normal
Presione PLAY.
PLAY
Reproducción a cámara lenta |
Presione SLOW durante la reproducción.
SLOW Cada vez que presione el botón SLOW , la
> ~ velocidad de reproducción a cámara lenta
cambiará.
M Para reanudar la reproducción normal
Presione PLAY.
PLAY
| Localización de un capítulo o pista específico |
Presione repetidamente SKIP 1«« 0 »»ipara hacer
que se visualice el numero del capitulo o de la
pista que desee.
La reproducción se iniciará desde el capítulo o la pista que
haya seleccionado
SKIP Localizar capítulos o pistas sucesivas pulsando
una vez el botón.
Localizar el capítulo o pista anterior pulsando el
botón una vez en los 5 segundos de reproducción.
Si pulsa una vez el botón tras 5 segundos, iniciará
la reproducción desde el principio del capítulo o
la pista actual.
| Notas sobre los derechos de autor
La ley prohibe copiar, difundir, mostrar, emitir por cable,
reproducir en publico, y alquilar sin permiso material con
derechos de autor reservados (copyright).
Los videodiscos DVD estan protegidos contra copia y
cualquier grabación realizada de estos discos se distorsionará.
Este producto incorpora la tecnología de protección de
derechos de autor (Copyright) mediante un método que
protege ciertas patentes de EE.UU. y otros derechos de
propiedad intelectual pertenecientes a Macrovision Corporation
y otros propietarios de derechos. La utilización de esta
tecnología de protección deberá ser autorizada por Macrovision
Corporation, y tiene como fin la utilización en el hogar y otros
usos de contemplación limitados a menos que Macrovision
Corporation autorice otra cosa. Está prohibido modificar esta
ingeniería y desmontar la unidad.
Fabricado bajo licencia de Dolby Laboratories. “Dolby” y el símbolo con
una doble D son marcas comerciales de Dolby Laboratories. Trabajos
confidenciales no publicados. Copyright 1992-1997 Dolby Laboratories.
Todos los derechos quedan reservados.
DivX, DivX Certificados, y los logos asociados son marcas registradas de
DivX, Inc. y se usan bajo licencia.
O 2006 Toshiba Corporation Impreso en China TSDAC10051A
IMPORTANT!
TOSHIBA
Image is Everything™
PRODUCT REGISTRATION CARD
Complete and return this Product Registration Card within 10 days to receive
valuable Toshiba information. Failure to complete and return this card does not
diminish your warranty rights.
See details inside...
If you have comments or suggestions about our product, please write to:
Toshiba America Consumer Products, L.L.C. >> 82 Totowa Road >> Wayne, NJ 07470
Copyright ® 2004 All Rights Reserved Please seal with tape. Do not staple.
Please send products and other correspondence to:
First Class
Toshiba America Consumer Products, L.L.C. Postage
82 Totowa Road Required
Wayne, NJ 07470 Post Office will
not deliver without
proper postage.
Toshiba America Consumer Products, L.L.C.
P.O. Box 174007
Denver, CO 80217-4007
TSDAC60001A PM001 7547010
Congratulations for choosing Toshiba, a leader in developing tomorrow's technology today. Toshiba is committed to producing high-quality, reliable and innovative products. To uphold
our commitment to excellence, we need to understand our customers’ needs.
Please complete the following Product Registration Card. The information we are asking from you below will help us bring you new products specifically designed to meet your
needs. By registering your product you will automatically be enrolled in our Consumer Information Program, which provides you with the following benefits:
1. PRODUCT SAFETY NOTIFICATION: Registering our product will allow us to contact you in the unlikely event a product safety notification is required.
2. CONFIRMATION OF OWNERSHIP: We will keep the model number, serial number, and other information on this card in our files for up to ten years. in the event of fire, flood or
theft, your registration will serve as your proof of purchase for insurance purposes.
3. WARRANTY SERVICE: Filling out this card will help us contact you in case there is a problem with this product.
IMPORTANT: Please register your product within 10 days by mail or register online @ www.tacp.toshiba.com/register
1. Ом: С ме. О ме. OT Miss Email address | |
СЕТ Г СЕР ЕЕ |
EII AAA ÉL |
City State Zip Code
Home telephone number Work telephone number 2 Dateof
|| | СИЕ | | IL JA
Area Code Area Code Month Day Year
IMPORTANT! To ensure your enrollment in Toshiba's Consumer Information Program, write the complete model number of the product you purchased in the space below.
3. Model Number
|
5. Price paid {excluding tax) $
| |
|| |
| | |
| 4. Serial Number
|
LL]
|
6. Have you purchased a service contract or extended warranty for this product? 7. Where was this product purchased?
1. Yes, from my retail dealer 01. Received as a Gift 07. Catalog Showroom
2. No, but contract was offered by my retail dealer 02. Department Store 08. Rental Dealer
3. No, contract was not offered 03. Discount Store 09. Mail Order
a. If you answered “yes” to 6, how long does your service contract or extended warranty last? 94. TV/Appliance Store 10. Premium Offer
05. Specialty/Electronics Store 11. Other
1. 1 Year 3. 3 Years 08. Warehouse/Membership Club
2. 2 Years 4. More than 3 Years
D. Would you like to obtain more information from Toshiba on extended warranties:
1 Yes 2 No fold here
With #1 being the most important, prioritize the following: Check all that apply
1. Where do you get new product information? 5. Which of the following products do you own?
newspaper Product Manufacturer
tech magazines TV - projection TV Lun
news broadcasts TV - tabletop ~~
on-line
product literature
TV Combination
TV - flat panel/plasma
retail salesperson DVD player —
other Home Theater in a Box
TiVo” _
2. What resources do you use to make your purchase decision? Home Networking Server
friends/family Computer
on-line research
retail salesperson
product reviews
other
style, cosmetics
oo picture quality
brand
_ quality
price
technology
reliability
4. Why did you choose this product?
brand image
quality
price
purchased other Toshiba products
technology
reliability
recommended by a friend/family
product reviews
3. What do you look for when purchasing CE products:
Digital Camera
Digital Camcorder
Receiver
Speakers - stand alone
Other
6. May we contact you? ;
Г] Yes ] No Email:
Thanks for taking the time to fill out this
questionnaire. Your answers will be used for
market research studies and reports.
[] Please check here if, for some reason,
you would prefer not to participate in the opportunity.
PLEASE DO NOT RETURN
THIS PRODUCT TO THE STORE
If you are experiencing a technical problem
or have questions regarding operation,
authorized service centers, warranty or parts,
contact our Customer Service Department at:
1-800-631-3811
For DVD inquiries, including Portable DVD, DVD Home Theater in a Box,
TV/DVD combos, DVD/VCR combos, and TV/VCR/DVD combos, please call:
1-866-583-7353
For DVD recorders, including DVD/T Мо’, please call:
1-800-319-6684
Monday - Friday 10:00am to 7:00pm ET
Many questions regarding parts, service and warranties
can be answered by visiting the Customer Solutions section of our website:
www.toshiba.com/tacp
THANK YOU
TOSHIBA
PM0013946011 TSDACBC002A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement