Carbon Monoxide Detector Carbon Monoxide Detector

Carbon Monoxide Detector Carbon Monoxide Detector
Carbon Monoxide Detector
NIST
it
This ground breaking, innovative product
takes CO detection to the next level. This CO
Detector has a flashing tri-colored LED, audible alarm to warn you that it is hot on the
trail. Features a backlit display and continuous readings. This new high technology tool is
fast and accurate.
• Displays CO from 0 to 999 ppm
• Tri-color LED indicates concentrations at 3 levels
complying with residential and work place standards
• Auto Zero activates upon turn on
• Maxcapture continually updates and displays
highest CO reading
• Audible alert triggers above 35 ppm indicating
threshold of dangerous concentration
• Backlit display
• Three year limited warranty
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
SPECIFICATIONS
Range
Resolution
Accuracy
Visual
Alarms
Catalog No. Model
Description
UE7102
CO71
Carbon Monoxide Detector
Please inquire for NIST Certification
P
Price
$249.90
Battery
Ambient Temp
0-999 ppm
1 ppm
±(3% of reading + 1 ppm)
LCD and LED
Visual
Green
2-9 ppm
Yellow
10-34 ppm
Red
>35 ppm
Audible
>35 ppm increasing frequency with
concentration
9V standard alkaline
32° to 104°F (0° to 40°C)
Carbon Monoxide Detector
SPECIFICATIONS
Special Features
Gas Detection / Environmental
Power
Operating Life
1042
Size
Weight
Operating Humidity
Operating Temperature
Calibration Requirements
Audible Alarm
Visual Alarm
Mounting
Radio Frequency
Protection
Hazardous Area Rating
Davis Inotek Instruments
IDR Sensing Technology (Electrochemical Sensor)
Emergency Reader Interface
Self Powered. No battery replacement required
Up to 45,000 hours (5 years) non alarming
24 Hours - continuous alarm
14 days - IDR warning alert
Triangle 4.75" x 5.25" x 5.25" Depth 1.5"
9 oz (276 grams)
Intermittent: 0 to 99% RH (non-condensing)
Continuous: 15 to 90% RH
Intermittent: 32 to 122°F (0 to 50°C)
Continuous: 40 to 104°F (4 to 40°C)
None. AutoCheck with low sensitivity alarm
85 dB at 10 Feet
Dual colored LED (IDR/Full Alarm/Battery/Sensitivity)
Flat Surface
Faraday Cage eliminates electromagnetic
interference
General
Catalog No.
Description
AQ69601
Carbon Monoxide Detector
Price
$79.90
www.davis.com
Bacharach Carbon Monoxide Analyzers
NIST
it
NIST
it
The Snifit® 50 allows you to continuously measure and display CO levels
between 0 and 1,999 Ppm. With 1 PPM resolution, the Snifit® 50 can accurately measure low to high concentrations quickly and easily. The highly
visible display indicates PPM of CO and a backlight for use in low conditions.
SPECIFICATIONS
Range
Resolution
Display
Sensor Type
Sensor Calibration
Sensor Accuracy
Dimensions/Weight
Power Source
Battery Life
Manual Zero
Auto Power Off
Operating Temperature
0 - 1,999 PPM
1 PPM
3 1⁄2" display with yellow-green backlight
Electrochemical (Specific to CO)
Factory calibrated on 100 PPM
+/- 5% or reading
5.5" L x 2.0" W x 1.57" H / 8 oz.
9-volt battery
6 months operation with normal duty cycles
Reduces chances of zeroing in hazardous environment
Every 30 minutes
32°F to 104°F (0° to 40°C
Catalog No.
Model
Description
BA197060
19-7060
Snifit® 50 Carbon Monoxide Analyzer
(digitally displays CO in ambient air)
Includes installed and calibrated CO sensor
Spare Parts and Accessories
BA197061
19-7061
BA193225
19-3225
BA232156
23-2156
BA446939
24-7059
BA4469501
51-1994
Price
Replacement CO sensor
Coiled cord for Snifit 40
Calibration adapter cup
Calibration kit (w/o gas cylinder)
Calibration gas (100 ppm)
$299.00
153.00
52.00
58.00
235.00
168.00
Please inquire for NIST Certification
Personal Gas Monitor/Alarm
SPECIFICATIONS
Display and Information
Weight
Battery
Special Features
Dimensions
Radio Freq. Protection
Warranty
Catalog No.
Gas
AQ71460
AQ71451
AQ71452
AQ71453
AQ71459
Oxygen
19.5%
0-25% Vol.
30% VOL
Carbon Monoxide
35 ppm
0-900 ppm
2000 ppm
Hydrogen Sulfide
10 ppm
0-90 ppm
90 ppm
Chlorine
0.5 ppm
0-90 ppm
250 ppm
Ammonia
25 ppm
0-200 ppm
200 ppm
Hydrogen Cyanide, Nitrogen Dioxide, Hydrogen and Nitric Oxide are also available, Please inquire
Please inquire for NIST Certification
Davis Inotek Instruments
Alarm Level
Display Range
Max. Response
Price
$320.00
395.00
395.00
550.00
550.00
www.davis.com
P
Gas Detection / Environmental
Sensor Type
Normal Sensor Life
Temperature Range
R.H. Range
Hazardous Area Rating
High contrast numerical level-display plus high
intensity warning indicator and alert buzzer
5.5 oz
8 Months (non-alarming). Lithium battery-supplied
Power 'ON/OFF' switch plus convenient dual zero
and span adjustment for calibration at alarm point
for toxic gases (or 20.9% for Oxygen)
Electrochemical
Up to 18 months
-4 to 113°F (-20 to 45°C)
0 to 99% Humidity, Non-Condensing
Intrinsically safe for use in Class 1, Division 1,
Groups A, B, C, and D locations
3.65"L x 1.7"W x 1.1"H
Readings will not change by more than 5% of fullscale when placed no less than two feet from a
5-watt radio transmitting on a frequency of 30,
150, or 450 Mhz
One year standard
1043
H2S, CO or O2 Gas Detector/Alarm Clip
NIST
it
• Continuously ON
• Continuous LCD confidence display
• One button activation and TEST
• Records and displays on demand Peak (Maximum) alarm exposure to
gas and the time elapsed since that exposure occurred
• No battery or sensor replacement
• Low and High setpoints displayed on demand in ppm or %
• Flashing wide angled alarm light visible from all angles
• Self-Tests (Auto and on Demand)
• Full function Self-test verifies sensor integrity, circuitry and battery
integrity
• Battery test every 2 hours (auto)
• Alphanumeric Status Panel advises:
• Gas monitored - H2S, CO or O2
• Alarm level encountered - LOW or HIGH
• Advises self test status
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
SPECIFICATIONS
Gas Detection / Environmental
P
1044
Size
1.1 x 2 x 3.2 in 28 x 50 x 81 cm
Weight
2.5 oz. (70 g)
Built-in Vibrator Alarm Model
Size
1.1 x 2 x 3.75 in 28 x 50 x 95 cm
Weight
2.9 oz. (83 g)
Alarms
Audible
85 dB at 1 ft. (0.3 m)
Visual
Flashing wide light bar Flashing ALARM icon
Levels
Two (2) Customer specified
General
Tough ABS enclosure
Humidity
5 to 95% RH non-condensing
EMI/RFI Protection
Complies with EMC Directive 89/336/EEC
Warranty
For the Life of the instrument
Ratings and Certifications
CULUS
Cl I, Div. 1, A, B, C, D
Cenelec
EEx ia IIC
CE
European Conformity
Gas Monitored
Hydrogen Sulfide
Measuring Range
0-100 ppm
Alarm Setpoints (Standard) Low
10 ppm
High
15 ppm
Operating Temperature
-40 to + 45°C
-40 to + 114°F
Calibration
Not Required
GasAlertClip comes complete with belt clip, test cap and instructions in local languages.
Carbon Monoxide
0-300 ppm
35 ppm
200 ppm
-30 to + 45°C
-22 to + 114°F
Not Required
Oxygen
0-30% by volume
19.5%
23.5%
-20 to + 45°C
-4 to + 114°C
Self-calibrating
Catalog No. Model
Description
Price
BW2402
BW2412
BW1201
BW2422
BW2432
BW1211
BW2358
2 Year Hydrogen Sulfide Detector
2 Year Carbon Monoxide Detector
1 Year Oxygen Detector
2 Year Hydrogen Sulfide Detector with built-in Vibrating Alarm
2 Year Carbon Monoxide Detector with built-in Vibrating Alarm
1 Year Oxygen Detector with built-in Vibrating alarm
Earphone (for use with Vibrating Alarm Models only)
Special alarm setpoints are available, Please inquire
Please inquire for NIST Certification
$295.00
295.00
270.00
345.00
345.00
320.00
14.00
GA24-H
GA24-M
GA12-X
GA24A-H
GA24A-M
GA12A-X
D4-E2358
Davis Inotek Instruments
www.davis.com
Oxygen & Toxic Gases Monitor / Alarm
A complete range of small, portable monitors/alarms for the detection of O2 and toxic
gases, such as CO, H2S, SO2, NOx, & NO2.
Ideally suited as a personal monitor for field
use, each unit is dedicated for the continuous
measurement and alarm of a particular gas.
Catalog No. Model
GC524701
GC524702
GC524703
GC524704
GC524705
GC524706
GC524707
GC524708
GC524709
GC524710
GC524711
GC524712
GC524713
GC524714
GC524715
GC524716
GC524717
GC524718
GC524719
GC524720
GC524721
Description
Price
GC501
O2 Oxygen Monitor/Alarm
$520.00
GC501X O2 Oxygen Monitor/Alarm
520.00
GC502
O2 Oxygen Monitor/Alarm
555.00
GC502X O2 Oxygen Monitor/Alarm
555.00
GC401
CO Toxic Gas Monitor/Alarm
595.00
GC701
H2S Toxic Gas Monitor/Alarm
595.00
GC801
SO2 Toxic Gas Monitor/Alarm
595.00
GC901
NOx Toxic Gas Monitor/Alarm
595.00
GC952
NO2 Toxic Gas Monitor/Alarm
595.00
501-505-BR Carrying case (all models)
50.00
501-RC
Remote cable for 501 & 501X
65.00
33-200
Replacement sensor for GC-501, O2 103.00
33-250
Replacement sensor for GC-501X, O2 110.00
33-475
Replacement sensor for GC-502, O2 121.00
33-455
Replacement sensor for GC-502X, O2 121.00
44-300
Replacement sensor for GC-401, CO 115.00
44-700
Replacement sensor for GC-701, H2S 115.00
44-800
Replacement sensor for GC-801, SO2 115.00
44-900
Replacement sensor for GC-901, NOx 115.00
44-500
Replacement sensor for GC-952, NO2 115.00
401-RC
Remote cable for GC -401, 701, 801,
65.00
901 and 952
Please inquire for NIST Certification
SPECIFICATIONS—OXYGEN
Model
Range
Accuracy
Dimensions
Alarm
(Low Oxygen)
Temp. limits
Power Source
Battery Life
Continuous
Response time
Sensor life
Sensor Mounting
GC-501
GC501X
0-25% O2
0-100% O2
±2% full scale
5.25 x 2.5 x 1.25 inches
Both audible and visual at 19.5%-Factory Set
GC-502
0-25% O2
GC-502X
0-100% O2
0 to 45°C
One 9 Volt alkaline battery
2000 hours-no alarm
90% in less than 20 seconds
Warranted: 6 months
Expected: 12 months
GC501 & 501X: Housed in the monitor- Optional remote cable
available for detaching sensor from the monitor
GC502 & 502X: Outside the monitor using a coiled cable
SPECIFICATIONS—TOXIC GASES
Model
Toxic Gas
Range
Resolutions
Accuracy
Dimensions
Alarm high
Visual
Temp. Limits
Power Source
Response Time
Sensor-Life
Sensor Mounting
Davis Inotek Instruments
GC-401
CO
0-1.999
PPM
1PPM increments
±10PPM full range ,
±5PPM if used up to
200PPM maximum range
5.25 x 2.5 x 1.25 inches
Both Audible & Visual
GC-701
H2S
0-1.999
PPM
GC-801
SO2
0-1.999
PPM
GC-901
NOx
0-1.999
PPM
GC-952
NO2
0-1.999
PPM
±10PPM full range,
±10PPM full range,
±10PPM full range ,
±2PPM full range
±3PPM if used up to
±3PPM if used up to
±5PPM if used up to
100PPM maximum range 100PPM maximum range 200PPM maximum range
Both Audible & Visual
Both Audible & Visual
Both Audible & Visual
factory set at 200ppm
factory set at 50ppm
factory set at 20ppm
factory set at 200ppm
0 to 40°C
One 9 Volt alkaline battery
90% in less than 20 seconds
Warranted:6 months Expected: 12 months
Housed in the monitor—optional remote cable available for detaching sensor from the monitor
Both Audible &
factory set at 20ppm
www.davis.com
P
Gas Detection / Environmental
• Pocket-size, light weight
• Continuously monitors and displays
concentrations on LCD
• Audible and visual alarms
• Operates on a single 9 volt battery
• Wide temperature operating range
• Uses GCI patented electrochemical
sensors
• Large LCD display
1045
90 Day H2S Gas Detector
NIST
it
SPECIFICATIONS
• Ideal for employees and contractors for short term work
projects
• Continuously on
• One button activation and TEST
• Confidence flash every 30 sec.
assures you the detector is ON
and functioning properly
• Advanced microcontroller based
operation
• High output alarms, 85 dB
audible and wide angle
superbright LED visual alarm
• Shock resistant ABS enclosure
• Electrochemical temperature
compensated sensor
• Rugged and compact, weighs
only 0.85 oz. (24 g)
Self-Tests
(Auto and On Demand)
• Full function Self-Test verifies
sensor integrity, circuitry and
battery integrity (automatically
each day or on demand)
• Battery is tested continuously
(auto) and on-demand
Size
1.0 x 1.1 x 2.0 in 25 x 28 x 52 mm
Weight
0.85 oz (24 g)
Alarms
Audible
85 dB at 1 ft. (0.3 m)
Visual
Flashing wide bar lens
Levels
One (1) Customer specified
General
Tough ABS enclosure
Humidity
5 to 95% RH non-condensing
EMI/RFI Protection
Complies with EMC Directive 89/336/EEC
Warranty
90 days from activation (6 month shelf life)
Ratings and Certifications
CULUS
Cl I, Div. 1, A, B, C, D
Cenelec
EEx ia IIC
CE European Conformity
Gas Monitored
Hydrogen Sulfide
Measuring Range
0 - 100 ppm
Alarm Setpoint
10 ppm (Standard)
Operating Temperature
-40 to + 45°C -40 to + 114°F
Calibration
Not Required
GasAlert90 comes complete with pocket/belt clip and instructions
Catalog No. Model
BW90
Description
Price
GA90-H 90 Day Hydrogen Sulfide Detector $99.00
Please inquire for NIST Certification
Portable Single Gas Monitors
NIST
it
The SafeTest 90 is an extremely rugged, lightweight
personal single gas monitor for oxygen and other toxic
gases. The unit features: compact design, slips easily into
a shirt pocket or clips onto a belt, offers very long battery
life, loud pulsating audible alarm and bright visual alarm.
Gas Detection / Environmental
P
Digital Display
• Extremely Portable and Compact
• Simple One-Button Operation
• Dual Programmable Alarm Levels
• Large Backlit LCD
®
SPECIFICATIONS
Size
Weight
Power
Temperature Range
Catalog No. Model
Description
QS9881
SafeTest 90
Portable Gas Monitor - Oxygen
QS9882
SafeTest 90
Portable Gas Monitor - Hydrogen Sulfide
QS9883
SafeTest 90
Portable Gas Monitor - Carbon Monoxide
QS9886
SafeTest 90
Portable Gas Monitor - Nitrogen Dioxide
* Built-in vibrating arm available — additional $65.00
Please inquire for NIST Certification
1046
• Audible & Visual Alarms
• Continuous Sampling
• Reliable Self-Test Feature
• RFI Shielding
Davis Inotek Instruments
Price
$365.00
395.00
395.00
545.00
Sensor Specifications
Gas
Oxygen O2
Carbon Monoxide CO
Hydrogen Sulfide H2S
Chlorine CL2
Sulphur Dioxide SO2
Nitrogen Dioxide NO2
1.3" x 3.0" x 3.9" (3.3 x 7.6 x 9.9 cm)
6.3 oz. (180g)
One 9-volt alkaline or lithium battery
Operating -10°C to + 40°C
Range
0-30%
0-1500 ppm
0-500 ppm
0-20 ppm
0-50 ppm
0-50 ppm
Resolution
0.1%
1 ppm
1 ppm
0.1 ppm
0.1 ppm
0.1 ppm
www.davis.com
Rugged Single Gas Monitor
NIST
it
Large Display With Warning Horn & Visual Alarms
• On-board memory contains sensor specific data
• Automatic sensor recognition
• Simple zero and calibration functions
• Piercing two tone horn and flashing bright LED alarms
• Powered by a single user replaceable 9 volt battery
• RFI/EMI Resistant
• Lightweight and extremely rugged impact resistant ABS housing
• Support by QuestSuite™ for Windows software
Catalog No. Model Description
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
Price
Gas Monitor (Non-Datalogging)
®
QS2221
SC100
SafeCheck Gas Monitor with O2 sensor
$595.00
QS2222
QS2223
QS2224
QS2226
QS2228
QS2229
QS2230
Accessories
QS54948
QS54715
SC100
SC100
SC100
SC100
SC100
SC100
SC100
SafeCheck Gas Monitor with CO sensor
SafeCheck Gas Monitor with H2S sensor
SafeCheck Gas Monitor with NH3 sensor
SafeCheck Gas Monitor with HCN sensor
SafeCheck Gas Monitor with NO sensor
SafeCheck Gas Monitor with NO2 sensor
SafeCheck Gas Monitor with ETO sensor
595.00
595.00
750.00
695.00
695.00
695.00
695.00
54-948
54-715
Hand Aspirator with 10 ft. of Hose
Serial/Computer Interface Cable
(RS-232 to PC) for QuestSuite
QS54971
54-971 .5 ppm Regulator with 2' (.050" I.D.) tubing
QS54252
54-252 25 ppm Hydrogen Sulphide/100 ppm Carbon Monoxide
2.5% Methane/18% Oxygen in Nitrogen
QS54146
54-146 25 ppm Hydrogen Sulphide in Air
QS54264
54-264 10 ppm Ammonia in Air
QS2012
QS-One QuestSuite Master
Module model QS-One with 56-740 Applet and cable
* All monitors, 9V alkaline battery, calibration adapter, manual and storage case
35.00
95.00
159.00
299.00
153.00
395.00
545.00
Please inquire for NIST Certification
SPECIFICATIONS
Alarms
Sensors
Dimensions
Rating
Intrinsic Safety
Pulsating dual tone, flashing LED, Remote alarm jack
Electrochemical
4.5" x 3.0" 1.5" / 8.8 oz.
Certified to IP54
UL, CUL, Class I, II & III, Division 1,
Group A thu G, EEX (European)
Gas Sensor
Range
Resolution
Oxygen O2
0-30%
0.1%
Carbon Monoxide CO
0-999 ppm
1 ppm
Hydrogen Sulfide H2S
0-500 ppm
1 ppm
Hydrogen Cyanide HCN
0-50 ppm
0.1 ppm
Ammonia NH3
0-50 ppm
1 ppm
Nitric Oxide NO
0-100 ppm
0.1 ppm
Nitrogen Dioxide NO2
0-50 ppm
0.1 ppm
Ethylene Oxide ETO
0-20 ppm
0.1 ppm
Multiple Gas Monitor/Datalogger
NIST
it
• Datalogging expanded memory capacity
• Large two line alphanumeric backlighted LCD
• Pulsating loud warning horn and flashing visual alarm indications
• Remote sample draw pump
• RFI/EMI resistant
P
®
Description
Price
Datalogger Model
QS7779
ML2000-NIC MultiLog 2000 Datalogger, 1 gas with LEL
$1,475.00
QS7780
ML2000-NIC MultiLog 2000 Datalogger, 2 gas with LEL & O2 1,575.00
QS7781
ML2000-NIC MultiLog 2000 Datalogger, 3 gas with LEL,
1,675.00
O2, CO or H2S
QS7782
ML2000-NIC MultiLog 2000 Datalogger, 4 gas with LEL,
1,795.00
O2, CO & H2S
*ML2000-NIC includes monitor, aspirator with hose, calibration adapter, NiCad battery pack,
spare alkaline battery pack, single unit charger (specify 12V, 120V, 220V), leather carrying
case, tool, manual, and storage case.
Non-Logger Model
QS6572
MC2000-NIC MultiLog 2000 Non-logger, 1 gas with LEL
1,275.00
QS6573
MC2000-NIC MultiLog 2000 Non-logger, 2 gas with LEL & O2 1,375.00
QS6574
MC2000-NIC MultiLog 2000 Non-logger, 3 gas with LEL,
1,475.00
O2, CO or H2S
QS6575
MC2000-NIC MultiLog 2000 Non-logger, 4 gas with LEL,
1,575.00
O2, CO & H2S
*MC2000-NIC includes monitor, aspirator with hose, calibration adapter, NiCad battery pack,
spare alkaline battery pack, single unit charger (specify 12V, 120V, 220V), leather carrying
case, tool, manual, and storage case.
Please inquire for NIST Certification
Davis Inotek Instruments
SPECIFICATIONS
Gas
Oxygen O2
Carbon Monoxide CO
Hydrogen Sulfide H2S
Chlorine CL2
Hydrogen Cyanide HCN
Ammonia NH3
Sulphur Dioxide SO2
Nitric Oxide NO
Nitrogen Dioxide NO2
Ethylene Oxide ETO
Dimensions
Temperature Range
Sensor Specifications
Gas
Combustible Gases
Range
0-30%
0-999 ppm
0-500 ppm
0-20 ppm
0-50 ppm
0-50 ppm
0-50 ppm
0-100 ppm
0-50 ppm
0-20 ppm
6.9" x 3.4" x 2.0"
-10 to 40°C (14 to 104°F)
Resolution
0.1%
1 ppm
1 ppm
0.1 ppm
0.1 ppm
1 ppm
0.1 ppm
0.1 ppm
0.1 ppm
0.1 ppm
22 ounces
Range
0-100% LEL or 0-5.0% by volume CH4
www.davis.com
Gas Detection / Environmental
Catalog No. Model
1047
Personal Gas Monitor
NIST
it
• Multi-Gas Monitor (1-4 gases)
• Single Button Operation
• Over 14 hours of continuous protection
• Light and compact
• Rugged and dependable
• Lifetime warranty
SPECIFICATIONS
Gas Detection / Environmental
P
1048
Gases
EX
OX
TOX
Ranges
EX
OX
TOX
Combustible gases
Oxygen (O2)
Hydrogen Sulfide (H2S)
Carbon Monoxide (CO)
CH4 0 to 100% LEL
O2 0 to 25% volume
H2S 0 to 100 ppm
CO 0 to 300 ppm
>3 years
1 year
>3 years
Expected Sensor Life EX
OX
TOX
Weight
12.7 oz. (360 g)
Dimensions
2.33 x 4.78 x 1.34 inches (WxHxD)
(59 x 120 x 34 mm)
Display
LCD, zoom function, backlight, adjustable contrast
Alarms
Audible and Visual Alarms with 3 adjustable levels
Operational Time
Up to 16 hours (depending on sensors & alarms)
Power Source
Rechargeable NIMH battery pack
Temperature Range -14°F to 122°F (-10 to + 50°C)
Humidity Range
0 (20) to 98% r.h. (non-condensing)
Pressure Range
800 to 1300 mbar
Casing
Carbon fiber reinforced polymide
Catalog No.
DN3333D
Model
G333/3D
The G333 multi-gas monitor is uniquely different and is designed to withstand the harshest
environments... even "Level A". The electronics in
G333 are fully protected from hazardous gases by
a special coating that assures your gas detector a
long and reliable lifetime.
The G333 is loaded with many powerful features. The G333 offers you TWA, STEL, high and
low peaks, a zoom function to single readings, and
a large LED. All these features packed into the
smallest and lightest multi-gas unit.
You may choose from several models of the
G333 to meet your monitoring needs. Versions include LEL, LEL + Oxygen, LEL + Oxygen + CO or
H2S and our unique LEL + Oxygen + Dualtox to
detect both CO and H2S.
One of the simplest gas monitors to use, with
over 14 hours of continuous protection. The G333
can be operated by a single button for a multitude
of features. Automatic zeroing and calibration is
only a touch away — the microprocessor does it all
in a matter of seconds.
The G333 has a feature that gives you not one
or two alarms, but three audio and visual alarms.
We offer a built-in vibrating alarm for high noise
environments.
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
Description
Multi-gas monitor for % LEL, CH4, 02 / DualTox (H2S + CO)
Price
$895.00
Replacement Sensors
DN3411
DN3412
DN3413
DN3414
DN3415
5704-019
5701-015
5703-015
5704-020
1333415
DualTox (CO/H2S)
Oxygen (O2)
Hydrogen Sulfide (H2S)
Carbon Monoxide (CO)
Combustible (CH4)
260.00
150.00
260.00
260.00
260.00
1333204
4001-034
1333242
7933-011
7933-012
7802-016
—
Instrument carrying case with shoulder strap
Charger 110V AC
Universal charger 115V/60Hz. (trickle/standard)
Calibration kit for non H2S (50% LEL, CO, O2)
Calibration kit for non H2S (50% LEL, CO, O2, H2S)
3-Way Calibration gas (50% LEL, CO, O2)
NISTTraceable Certificate with One Datapoint for O2, CO, H2S
45.00
55.00
275.00
195.00
315.00
80.00
199.00
Accessories
DN3204
DN1034
DN242
DN526
DN527
DN816
NISTGA33
Davis Inotek Instruments
www.davis.com
Multi-Gas Monitor with AutoCal ®
NIST
it
SPECIFICATIONS
Gases
EX
OX
TOX
Ranges
EX
OX
TOX
Expected Sensor Life
EX - 2 years
OX - 2 years
TOX - 2 years
18 oz.
3.1 x 6 x 2.9 (WxHxD)
LCD photosensitive back light
Visual - flashing LED and LCD
Audible - internal horn
HILITE - (optional)
11 to 18 hours (depending on alarms and
accessories)
Rechargeable NiMH battery pack
Dry cell battery pack (optional)
+ 14° to + 122°F (10° to 50°C)
0 (20) to 98% r.h. (non-condensing)
High impact ABS plastic with RF protective
coating
UL Class I, Div. 1 C, D T3C
Weight
Dimensions
Display
Alarms
Operational Time
Power Source
Temperature Range
Humidity Range
Casing
Approvals
Combustible % LEL
Oxygen (O2) % volume
Carbon Monoxide
Chlorine (CI2)
Hydrogen Sulfide (H2S)
Nitrogen Dioxide (NO2)
Sulfur Dioxide (SO2)
CH4 - 0 to 100% LEL
O2 - 0 to 25% volume
CI2 - 0 to 20 ppm
CO - 0 to 1000 ppm
H2S - 0 to 200 ppm
NO2 - 0 to 20 ppm
SO2 - 0 to 100 ppm
The AGM is a versatile 2-to-4 gas monitor that comes standard with 02 and combustible sensors. The unit can be configured to best match your gas detection needs by adding up to two
additional toxic sensors that include: CO, H2S, DualTox
(CO/H2S), CI2, NO2 and SO2.
The AutoCal calibration is true "hands free" calibration with
built-in error protection. The AGM will make all adjustments
and inform the user when the calibration is complete. The date
and time of the successful calibration will be stored in the memory of the AGM and will be displayed during subsequent turnon sequences. Error protection will display a warning message
and prohibit the calibration of the sensor if incorrect calibration
gas is used or if a sensor is deflective. The removable sensor
Catalog No.
Model
Davis Inotek Instruments
• AutoCal® Automatic Calibration
• Calibration Time and Date Stamp
• Lifetime Warranty
cover allows easy access to sensors for simple replacement.
The PTO connector allows power connections for a
MINIpump, HILITE, remote read-out accessories and communication for PC interface. The attachable MINIpump allows
samples to be drawn from remote locations. A hydrophobic filter prevents liquid from entering the pump and a low flow
alarm and display will warn the user of a sample line blockage.
The HILITE alarm is used for high noise environments. This
high decibel alarm will sound and display bright "strobe-like"
lights when alarm conditions exist. The Remote Readouts (RA100 and RA-101) consist of a rugged case which will display
readings that duplicate those of the AGM up to a distance of 50
feet. When alarm levels exist, the RA will display them and
sound a 100db horn. All AGM models are datalogging ready.
Once the unit is connected to a computer the information may
be downloaded to a display date, time of samples and the level
of each gas. This data can be recalled from the PC by operator,
date or instrument serial number.
Description
Hand-held gas monitor with no additional toxic sensors
Hand-held gas monitor, DualTox (CO, H2S)
Hand-held gas monitor, Hydrogen Sulfide (H2S)
Hand-held gas monitor, Carbon Monoxide (CO)
Hand-held gas monitor, Chlorine (CL2)
Hand-held gas monitor, Carbon Monoxide (CO), Hydrogen Sulfide (H2S)
Price
$1,200.00
1,400.00
1,400.00
1,400.00
1,600.00
1,650.00
Calibration Kit with carrying case
Calibration Kit with carrying case
195.00
305.00
Replacement Combustible (CH4) sensor
Replacement Carbon Monoxide (CO) sensor
Replacement Chlorine (CL2) sensor
Replacement Oxygen (O2) sensor
Replacement DualTox (CO/H2S) sensor
Replacement Hydrogen Sulfide (H2S) sensor
Instrument Storage Case Molded
Charger 110V
Charger 12V DC
Mini-pump (Includes: wand, 25 ft. tubing and filter)
NIST Traceable Certificate with Data
260.00
260.00
330.00
150.00
260.00
260.00
65.00
55.00
125.00
365.00
199.00
www.davis.com
P
Gas Detection / Environmental
DN301200
500C
DN301201
502C
DN301202
503C
DN301203
504C
DN301205
508C
DN301206
534C
Calibration Kits
DN301208
500C/502C/504C
DN301209
503C/534C
Accessories
DN5705014
5705-014
DN5705015
5704-015
DN5708012
5708-012
DN5701014
5701-014
DN5704014
5704-014
DN5703012
5703-012
DN301212
9000-518
DN301214
4001-027
DN301215
4001-028
DN30199
7771-004
NISTGA35
—
• 2-4 Gas Monitor
• PTO Connection for Accessories
and Data-Logging
1049
Bacharach Four-Gas Personal Monitor
The Bodyguard 4 is a compact, lightweight
and rugged monitoring instrument with features that make it convenient for use in a variety of industries.
Simultaneous four-gas monitoring provides
a wide range of available gas combinations to
customize the instrument to application requirements.
The durable metalized case is rugged, water-resistant and lightweight (just 16 ounces!)
with RFI shielding.
Calibration is as simple as setting
Bodyguard 4 into calibration mode and applying calibration gas. The instrument tells you
when calibration mode and applying calibration gas. The instrument tells you when calibration is complete. No extra buttons to push,
no knobs or pots to tweak, no levels to adjust,
no special fixtures required!
Every Bodyguard 4 is equipped with datalogging and convenient data downloading to a
PC. This allows for easy access to monitoring
information.
Ten to twelve hours of operation is provided
via a rechargeable nickel metal hydride pack
or three “AA” alkaline batteries. Batteries are
quickly and easily interchangeable in the
field.
The Bodyguard 4 can be easily operated by
three buttons on the instrument display panel for power up, backlight, display change and
zero. Sealed tamperproof buttons control calibration, adjustable audible and visual alarm
set levels and operational parameters.
Gas Detection / Environmental
P
1050
Catalog No.
Model
Description
Price
Basic Units
BA447718
5444-1112
$1,695.00
BA447721
5444-1110
BA447722
5444-2110
4 Gas Bodyguard for O2, LEL,
CO & H2S
3 Gas Personal Monitor for
O2, LEL, CO
3 Gas Personal Monitor for
O2, LEL, H2S
2 Gas Personal Monitor for O2, LEL
Confined Space Kit
1,273.00
1,470.00
BA447723
5421-0510
1,195.00
BA447731
54-8268
250.00
Accessories
BA447732
51-2979
Calibration Kit
150.00
Includes specified Sampling Pump, Waist Strap, Shoulder Strap and Unseen Menace booklet in
a Hard Carry Case
Please inquire for calibration gases.
Please inquire for NIST Certification
NIST
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
• Quick, easy change from
rechargeable to alkaline
batteries
• Available in two, three or four
gas models
• Automatic calibration
• High visibility LCD with backlight
shows continuous gas
identification
• Alternating high/low alarm with
sunlight visible visual alarm
• Smart Pump (optional)
SPECIFICATIONS
Gases detected & range
Oxygen
Combustibles
Carbon Monoxide
Hydrogen Sulfide
Sampling Method
Power Source
Operating Temperature
Relative Humidity
Dimensions
Weight
Davis Inotek Instruments
it
0-30%
0-100% LEL (0-5% CH4)
0-999 PPM
0-500 PPM
Diffusion (pump optional)
Three AA-size alkaline batteries or
nickel metal hydride pack
(8 to 10 hours)
-4° to 122°F (-20° to 50°C)
0-99% Non-condensing
3.25” L x 1.7" W x 6.25" H
(15.9 cm x 8.3 cm x 4.3 cm)
16 ounces
www.davis.com
Four Gas Detector
NIST
it
Four Gas Detector comes with Internal Sampling Pump and
measures H2S, CO, O2 and LEL
GasAlertMax™ provides extraordinary cost of ownership advantages. These include simple automated calibration, internal sampling pump, long-life NiMH gold VersaPak™ battery power (available in local stores) and simple one-button control. All of these features lower your training and maintenance costs. Operated by two
advanced microcontrollers and plug-in electrochemical and catalytic sensors, the GasAlertMax™ is equipped with high output audible/visual alarms.
SPECIFICATIONS
Detector
Gas:
Measuring Range:
Low alarm level
TWA alarm level
High alarm level
Auto zero
Calibration
Backlight
Full function self-test
Sensor
Four gas detector
H2S
CO
O2 (% by vol.)
Combustibles
0-100 ppm
0 - 300 ppm
0 - 30.0%
0 - 100 %LEL
10 ppm
35 ppm
19.5%
10%
10 ppm
35 ppm
N/A
N/A
15 ppm
200 ppm
23.5%
20%
Yes
Automatic
Low light and/or alarm conditions (auto); on demand
Verifies integrity of sensor, battery and circuitry; audible/visual alarms
Plug-in, electrochemical cell (H2S/CO twin, O2); catalytic bead (LEL)
Sampling pump
Indicators and Alarms
Visual alarm
Audible alarm
Confidence beep
Other
Remote alarm (optional)
Battery
Battery life
Size
Weight
Warranty
Ratings and Certifications
(Intrinsic safety)
250 ml/min
Clearly advises alarm levels both visually and audibly
Flashing, wide angled with dual red LEDs plus ALARM LCD readout
High-output, variable, pulsing siren ª95 dB at 1 ft/ (0.3 m)
Every 5 seconds (field selectable)
Low battery; Off warning; Sensor fail; Multiple gas hazard
Accepts vibrating alarm or remote audible/visual alarm (110 dB)
One 3.6 volt VersaPak™ NiMH rechargeable cell
10-12 hours operation; 6-9 hours for recharge
1.6 x 3.0 x 5.9 inches (40 x 75 x 150 mm)
15.4 oz (396 g)
2 years including sensors (1 year oxygen cell)
CSA Class I, Div. 1, Groups A, B, C, D
Class I, Zone ), GR. IIC (pending)
Model
Description
Price
BW45699
GAMAX-4
GasAlertMax™ H2S, CO, O2, LEL detector
BW45700
GAMAX-CKIT
GasAlertMax™ Confined space kit
BW45701
GA-VIB3
Remote vibrator alarm
125.00
BW45702
GA-HL-R3
Remote audible/visual alarm (110 dB)
195.00
BW45703
GA-BMAX
Concussion-proof boot
BWC58
CG-Q58
Quad calibration gas cylinder (58 L)
BWBUMP1
CG-BUMP1
Bump test gas aerosol (11 L)
55.00
BW45706
GA-VP110
VersaPak™ rechargeable battery
31.00
BW45707
D4-VP140
2-port, 12 volt, Black & Decker vehicle charger
85.00
BW45708
GA-HMAX
Holster
15.00
BW45709
D4-HSP-10
10 ft/ (3 m) sampling hose
55.00
$1,395.00
1,670.00
50.00
227.00
BW4RHM04
D4-RHM04
Replacement H2S/CO sensor
295.00
BW4RX06
D4-RX06
Replacement O2 sensor
125.00
BW4RW90
D4-RW90
Replacement LEL (0-100%) sensor
175.00
BW45713
GA-PFMAX
Pump filters (kit of 5)
BW45714
GA-RPMAX
Replacement pump
Please inquire for NIST Certification
Davis Inotek Instruments
10.00
175.00
Large LCD shows real-time gas concentration for H2S, CO, O2 and %LEL
• Internal pump for remote sampling
• LOW, HIGH and TWA alarms with
adjustable set points
• Equipped with plug-in replaceable sensors
• Simple, automatic calibration procedure
• Intrinsically safe to U.S. and Canadian standards
• Provides 95 dB tone and bright LED indication on alarm
• Small size (1.6 x 3.0 x 5.9 in/40 x 75 x 150
mm) and lightweight (15.4 oz./ 396g)
• Runs an entire shift on one Black & Decker
VersaPak™ NiMH rechargeable battery
(available worldwide)
• Peak values displayed on command
• Full function self-test of: sensor, battery and
circuitry integrity; and audible/visual alarms
• 2 NiMH rechargeable batteries, 2-port
charger, 10 ft. sampling hose, calibration
hose, holster and instructions in local languages included
• Vibrating alarm and remote audible/visual
alarm (110 dB) accessories available
www.davis.com
P
Gas Detection / Environmental
Catalog No.
1051
GasAlert H2S, CO or O2 Monitor/Alarm
NIST
it
GasAlert™ provides extraordinary cost of ownership advantages. These include simple automated calibration, 3 year (9,000 hours) power (camera
battery available in local stores) and simple onebutton operation. All of these features lower your
training and maintenance costs.
Operated by an advanced microcontroller and a
plug-in electrochemical sensor, the GasAlert™ is
equipped with high output audible/visual alarms.
The bright large LCD shows real-time gas concentrations and the instruments status at all times.
The full function self-test verifies sensor, circuit
and battery integrity and activates the audible/visual alarms each time you turn the instrument on.
The detector clearly advises the hazard level present - Low, High, or TWA. TWA (Time Weighted
Average) and Peak exposures are displayed on
demand.
The compact, rugged GasAlert™ is designed
with the most advanced RFI protection available
today. Delivered ready for use, simply clip the instrument to your lapel, pocket, belt or hard hat for
unequalled protection.
Gas Detection / Environmental
P
• Continuous LCD shows real-time gas concentrations
• One button operation
• Backlight -low light (auto), in alarm (auto) and on demand
• Simple auto zero and auto calibration with diagnostics protection to
ensure a valid calibration
• Flashing wide angled alarm light visible from all angles plus LCD
flashing ALARM icon
• Records and displays TWA and Peak exposures on demand
• High output plusing 90 dB audible alarm
• Continuous instrument “Status” diagnostics and advice
• Confidence beep is field selectable
Full Function Self-Test
• Tests sensor integrity, circuitry and battery integrity each time the
instrument is turned ON
• Continuous battery test
Alphanumeric Status Panel advises
• Gas monitored - H2S, CO or O2
• Alarm level encountered - LOW/TWA/HIGH
• Alarm setpoints displayed on activation and on demand
SPECIFICATIONS
Size
Weight
Auto Zero
Calibration
Alarms (field adjustable)
Audible
Visual
Levels
General
Humidity
EMI/RFI Protection
Battery
Warranty
Ratings and Certifications
CULUS
Cenelec
CE
1.1 x 2 x 3.75 in (28 x 50 x 95 cm)
2.9 oz. (83 g)
Yes
Automatic
90 dB at 1 ft. (0.3 m)
Flashing wide light bar
Flashing ALARM icon
Three: Low/High and TWA
Tough ABS enclosure
5 to 95% RH non-condensing
Complies with EMC Directive 89/336/EEC
Three year, lithium 3V
2 Years (1 year oxygen cell)
Cl I, Div. 1, A, B, C, D
EEx ia IIC
European Conformity
SPECIFICATIONS
Gas Monitored
Carbon Monoxide
Measuring
Range
0 - 500 ppm
Hydrogen Sulfide
0 - 100 ppm
Oxygen
0 - 30.0 % v/v
Temperature
Range
-20 to + 50°C
-4 to + 122°F
-40 to + 50°C
-40 to + 122°F
-20 to + 50°C
-4 to + 122°F
Low
35 ppm
Alarm Setpoints
(Field Adjustable)
TWA
35 ppm
HIGH
200 ppm
10 ppm
10 ppm
15 ppm
19.5%
N/A
23.5%
Catalog No.
Model
Description
BW45750
BW45751
BW45752
BW45753
GA-M
GA-X
GA-H
GA-AG-1
Carbon Monoxide Detector, 0-500 ppm
Oxygen Detector 0-30% Vol.
Hydrogen Sulfide Detector, 0-100 ppm
Alligator Clip for Detector
Price
$375.00
375.00
375.00
12.00
Please inquire for NIST Certification
1052
Davis Inotek Instruments
www.davis.com
Multipurpose Digital Gas Detector/Alarm
NIST
it
• Continuous 24 hour monitoring
• Compact, durable units
• Explosion proof housing for sensor
• Audio/Visual alarms
• Malfunction LED and test/checking switches
• Infrequent maintenance and calibration required
• Remote sensor reliable to 600 feet from controller or longer
• Relay contacts and recorder terminals
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
Catalog No. Model
UP75320
UP75321
3200/2AL/D
3200R/2AL/D
UP75322
UP75323
4200/2AL/D
4200/2AL/D
UP75324
UP75325
5200/2AL/D
5200R/2AL/D
UP75326
6200/2AL/D
UP75327
6200R/2AL/D
UP75328
UP75329
ET 6200/2AL/D
ET 6200R/2AL/D
UP75330
UP75331
7200/2AL/D
7200R/2AL/D
UP75332
8200/2AL/D
UP75333
8200R/2AL/D
UP75334
UP75335
9200/2AL/D
9200R/2AL/D
UP75308
UP753081
Description
Price
Sulfur Dioxide Detector-100 ppm (Wall-mount)
Sulfur Dioxide Detector-100 ppm (Wall-mount
with Remote Sensor)
Carbon Monoxide Detector-250 ppm (Wall-mount)
Carbon Monoxide Detector-250 ppm (Wall-mount
with Remote Sensor)
Ammonia Detector-100 ppm (Wall-mount)
Ammonia Detector-100 ppm (Wall-mount with
Remote Sensor)
Hydrocarbons (non-methane) Detector-1000 ppm
(Wall-mount)
Hydrocarbons (non-methane) Detector-1000 ppm
(Wall-mount with Remote Sensor)
Ethylene Oxide Detector-10 ppm (Wall-mount)
Ethylene Oxide Detector-10 ppm
(Wall-mount with Remote Sensor)
Hydrogen Detector-50% LEL (Wall-mount)
Hydrogen Detector-50% LEL ppm (Wall-mount
with Remote Sensor)
Combustible (Methane)Detector-100%LEL
(Wall-mount)
Combustible (Methane) Detector-100%LEL
(Wall-mount with Remote Sensor)
Freon Detector-250 ppm (Wall-mount)
Freon Detector-250 ppm (Wall-mount with
Remote Sensor)
4-20 mA Signal Output (Optional)
Additional Cable up to 600 feet (Remote Sensor
Units Standard with 50 feet)
$1,350.00
1,475.00
1,225.00
1,325.00
1,125.00
1,375.00
SPECIFICATIONS — Controller
Temperature Range
Repeatability
AC Power Input
Analog Output
Alarm Circuits
Audio Alarm Outputs
LED Indicators
1,185.00
1,325.00
1,125.00
1,325.00
1,188.00
1,375.00
1,125.00
Panel Controls
1,325.00
1,330.00
1,415.00
Relay Controls
125.00
1.00/ft.
Dimension/Weight
Please inquire for NIST Certification
-15°C + 55°C (5°F to 130°F)
± 2%
115VAC or 220VAC or 24VDC
4-20 mA or 0-1 VDC (optional)
Fail, Low(Caution), High(Danger)
Low (Pulsed Tone), High (Steady Tone)
Power lamp(Green, Continuous),
Fail lamp (Orange, Continuous),
Low lamp (Yellow,Flashing),
High lamp (Red, Continuous)
Zero Setpoint, Span Setpoint,
Low & High Alarm Setpoints,
Low & High Alarm Checks switches,
Reset (Latching or Nonlatching) at
High alarm
(1) Fail Relay
(1) Low Relay
(1 ) High Relay
(No COM, NC, 2A-115 VAC
or 2A 24 VDC)
6"W x 8"H x 4"D/7 lbs.
Sensors
SO2
CO
ETO
H2
3200
Solid state
diffusion
0-100 ppm
4200
Solid state
diffusion
0-250 ppm
NH3
(non-methane)
5200
Solid state
diffusion
0-100 ppm
Hydrocarbon
Model Number
Detection Method
6200
Solid state n
diffusion
0-1,000 ppm
ET6200
Solid state
diffusion
0-10 ppm
7200
Solid state
diffusion
0-50% LEL
Detectable Range
(Standard)
Accuracy
Response Time
(to a 90% Full Scale)
Sensitivity (Full Scale)
±10%
<60 sec.
±5%
<30 sec.
±5%
<30 sec.
±10%
<30 sec.
±5%
<30 sec.
±5%
<30 sec.
Combustible Gases
(Methane)
8200
Solid state
diffusion
0-100% LEL
0-50,000 ppm
±10%
<30 sec.
±5%
±1%
±2%
±2%
±5%
±1%
±1%
Temperature Range
Sensor Life
Warm Up Time
Zero Drift
Current Setting (mA)
5 F° to 140 F°
> 1 yr.
2 min.
<5%/mo.
255
5 F° to 140 F°
> 1 yr.
2 min.
<5%/mo.
250
5 F° to 140 F°
>2 yr.
2 min.
<5%/mo.
260
5 F° to 140 F°
>3 yr.
2 min.
<5%/mo.
255
5 F° to 140 F°
>2 yr.
2 min.
5%/mo.
250
5 F° to 140 F°
>1 yr.
2 min.
5%/mo.
250
5 F° to 140 F°
>1 yr.
2 min.
5%/mo.
250
Warranty
(Normal Operation)
Remote Sensor
Cable Length
Electrical Classification
(at hazardous
atmosphere area)
1 yr.
1 yr.
1 yr.
1 yr.
1 yr.
1 yr.
1 yr.
±10%
<30 sec. (R22, R502, R134A)
<90 sec. (R113, R11, R123, R12)
±2% (R22, R02, R134A)
±5% (R113, R11, R123, R12)
5 F° to 140 F°
>1 yr.
2 min.
5%/mo.
230 (R22, R502, R134A)
250 (R113, R11, R123, R12)
1 yr.
50 feet
50 feet
50 feet
50 feet
50 feet
50 feet
50 feet
50 feet
Class 1 Division 1
Group C,D
Class 1 Division
Group C,D
Class 1 Division 1
Group C,D
Class 1 Division 1
Group C,D
Class 1 Division 1
Group B, C, D
Class 1 Division 1 Class 1 Division 1
Group B, C, D
Group B, C, D
Davis Inotek Instruments
Freon
9200
Solid state
diffusion
0-250 ppm
Class 1 Division 1
Group B, C, D
www.davis.com
Gas Detection / Environmental
SPECIFICATIONS — Sensors
P
1053
Multi-Gas Detector
NIST
it
The Defender is designed for
field friendly operation, with
large, bright gas/alarm indicators
and one button operation.
The Defender provides effective
protection using a reliable microcontroller and the most advanced
sensors.
SPECIFICATIONS
Detector
Power
Temperature Range
Humidity
Full Function self Test
Records/Displays
Calibration
Security
Sensors
Display
Alarm Setpoints
Backlight
Alarms
Audible
90 dB @ 1ft. (0.3 m) variable pulsed beeper
Clearly distinguishes between low and high alarm
1. Two (2) flashing ‘Sunbright’ LEDs;
2. Gas specific LCD flashes in alarm
Two setpoints per sensor (user adjustable):
Toxics: Low & High (TWA, STEL)
Oxygen: Deficiency & Enrichment
Combustibles: Low & High
Over-Range; Multiple Gas Exposure; Sensor
Removed; Calibration Air and Low Battery
Size: 4.7 x 4.04 x 1.13 in. (11.8 x 10.3 x 2.9 cm) approx.
Weight: 13.27 ozs. (375 g) including battery
Rugged, high impact resistant, composite material,
RFI/EMI shielded
Two years: Instrument including Toxic and LEL sensors
Visuals
Alarm Levels
Other Alarms
Gas Detection / Environmental
P
1054
• Compact and Lightweight
• Non-intrusive battery/sensor
replacement and calibration
• Two Alarm Levels per Sensor
• Auto Zero and Auto Span
Functions
• Automatic Self Test
• Simple One Button Operation
• Password Security - User selectable
• Rugged... Truly Field Tough
Catalog No.
Model
Description
BW42000
D4-2000
Combustible (%LEL) Oxygen (O2), Carbon
Monoxide (CO), Hydrogen Sulfide (H2S)
NIST Traceable Certificate with Data
NISTGA10
—
Replacement Sensors
BW4RHM04
D4-RHM04
BW4RX06
BW4RW90
Accessories
BW4VP135
D4-RX06
D4-RW90
BW4M1725
BW41LC
BW42EC
BW4E2358
BW4M1713
BW4VP100
D4-M1725
D4-1-LC
D4-2-EC
D4-E2358
D4-N1713
D4-VP135
BW4VP160
BWQ58
CK-Q58
BWC58
CG-Q58
Price
Physical
Enclosure
Warranty
Catalog No.
Model
Description
$895.00
BWQ15
CK-Q15
199.00
BWC15
CG-Q15
295.00
BWBUMP1
CG-BUMP1
125.00
175.00
BW05
BWAS01
BW4SP01
BWPROB1
BWPROB3
BWFIL2
REG-0.5
D4-AS01
D4-SP01
MM-PROB1
MM-PROB3
MM-FIL-2
BWHOSE10
D4-HOSE-10
BW1758K
M1758K
BWUP1
BWWT1
D4UPGRADE1
D4-WT-1
BWPF1
D4-PF-1
Calibration Kit c/w regulator, Quadgas
$388.00
cylinder, hose and carrying case
150.00
Quad Calibration Gas Cylinder (CH4-2.5%,
02-20.9%, H2S-25 ppm, CO-100 ppm, bal. N2)
55.00
“Bump” Alarm Test Gas Aerosol (CH4-2.5%,
O2-10%, H2S-40 ppm, CO-200 ppm)
Calibration Gas Regulator (0.5 LPM)
175.00
Manual Aspirator Pump
95.00
Motorized Sampling Pump
295.00
1 ft. (0.3 m) Search Probe c/w Handle
105.00
3 ft (0.9 m) Search Probe c/w Handle
120.00
Search Probe Dust Filters (Kit of 10)
20.00
includes one (1) spare gasket)
10 ft. (3 m ) Sampling Hose c/w quick
65.00
connect, in-line water trap and particle filter
Toxic and Oxygen Sensor Replacement
25.00
Screens (Kit of 10)
Two to Four gas upgrade kit (include. sensor
325.00
(PS-RHOMO4), filters and instructions)
Replacement Mini Water Trap/Filter for
9.00
Sampling Hose
Replacement Particulate Filter for Sampling Hose 11.00
Twin Tox - Carbon Monoxide (CO) and
Hydrogen Sulfide (H2S) Sensor c/w filter
Oxygen (O2) Sensor c/w filter
Combustible (0-100% LEL) Sensor
Dual Charger Kit c/w 2 VersaPak Batteries
(comes with Defender) - 3 hour charge time
Wrist Strap (comes with Defender)
Leather Case with Belt Loop
Equipment Hard Sided Carrying Case
Earphone
Calibration Cup (comes with Defender)
VersaPak Rechargeable Battery
(Comes with Defender)
Quad Charger - one hour per battery charge time
Calibration Kit c/w regulator, Quad gas
cylinder, hose and carrying case
Quad Calibration Gas Cylinder (CH4-2.5%,
02-20.9%, H2S-25ppm, CO-100 ppm, bal. N2)
Davis Inotek Instruments
Multi-gas with advanced microcontroller based operation
Rechargeable NICAD - 12 hours operation;
Charge time 3 hours
-20° to + 50°C (-4° to + 122°F)
5 to 95% RH non-condensing
Automatic when Defender is turned ON
1. TWA (Time Weighted Average) Exposure
2. Peak Exposures
Automatic Zero and Span
Pass protection for calibration and alarm setpoints
Combustible: Plug-in catalytic bead
Toxics and Oxygen: Plug-in electrochemical cells
Four (4) extra large gas specific alpha-numeric LCDs
Displayed each time the unit is turned ON
Push-button, Automatic in Alarm
64.00
7.00
80.00
105.00
14.00
15.00
24.00
77.00
445.00
227.00
Price
Please inquire for NIST Certification
www.davis.com
Multipurpose Gas Detector/Alarm
NIST
it
• Continuous 24 hour monitoring
• Compact, durable units
• Explosion proof housing for sensor
• Audio/visual alarms
• Malfunction LED and test/checking
switches
• Infrequent maintenance and calibration required
• Remote sensor reliable to 600 feet
from controller
• Relay contacts and recorder terminals
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
The wall mount unit is for use in an enclosed
area. Remote sensor provides open space monitoring ability. At hazardous locations, explosion proof
sensors and their junction box housing meet NEC
requirements for Class 1, Division 1, Group A-BC-D.
Applications
The unit is designed for those who are concerned about explosive and toxic gases over a long
period of time mostly within an enclosed area
and/or work environment.
Description
Range
UP22746
UP22747
2200
2200R
0-50 ppm
0-50 ppm
$950.00
1,095.00
UP75095
UP75096
3200
3200R
0-100 ppm
0-100 ppm
999.00
1,199.00
UP75101
UP75301
4200
4200R
0-250 ppm
0-250 ppm
899.00
1,099.00
UP75102
UP75302
UP75103
UP75303
5200
5200R
6200
6200R
UP22748
UP22749
ET6200
ET6200R
UP75104
UP75304
UP751051
UP753051
7200
7200R
8100
8100R
UP75105
UP75305
8200
8200R
UP75306
UP75307
9200
9200R
UP75308
—
Hydrogen Sulfide Detector
Hydrogen Sulfide Detector
with remote sensor
Sulfur Dioxide Detector
Sulfur Dioxide Detector
with remote sensor
Carbon Monoxide Detector
Carbon Monoxide Detector with
remote sensor
Ammonia Detector
Ammonia Detector with remote sensor
LP Gas/Gasoline Vapor Detector
LP Gas/Gasoline Vapor Detector
with remote sensor
Ethylene Oxide Detector
Ethylene Oxide Detector
with remote sensor
Hydrogen Detector
Hydrogen Detector with remote sensor
Combustible Gas Detector
Combustible Gas Detector
with remote sensor
Combustible Gas Detector
Combustible Gas Detector
with remote sensor
Freon Detector
Freon Detector
with remote sensor
4-20mA analog output (optional)
Price
0-100 ppm
950.00
0-100 ppm 1,099.00
0-1000 ppm 950.00
0-1000 ppm 1,195.00
0-10 ppm
0-10 ppm
950.00
1,195.00
0-50 % LEL
950.00
0-50 % LEL 1,195.00
0-100% LEL 950.00
0-100% LEL 1,195.00
0-1000 ppm 950.00
0-1000 ppm 1,195.00
0-250 ppm
0-250 ppm
999.00
1,199.00
125.00
Calibration Gas Mixtures
UP3200
3200-10-2
SO2 100 ppm/Air
UP4200
4200-10-4
CO 100 ppm/Air
UP5200
5200-10-4
NH3 100 ppm/Air
UP62002 6200-10-1
Hexane 1000 ppm/Air
UP6200
6200-10-1
Hexane 1000 ppm/Air
UP7200
7200-10-1LEL Hydrogen 50% LEL/Air
UP8200
8200-10-2
Methane 1000 ppm/Air
The Calibration Kit will include: one sample gas, one zero gas cylinder, one regulator
and one plastic case.
Please inquire for NIST Certification
Davis Inotek Instruments
499.00
489.00
595.00
499.00
595.00
475.00
475.00
RANGES
Model
2200
3200
4200
5200
6200
ET6200
7200
8200
9200
8100
Gas
H2S
SO2
CO
NH3
Hydrocarbon
Ethylene Oxide
H2
Methane
Freon
Methane
Range
100, 500, 1000 ppm
50, 250, 1000 ppm
0-100, 500, 1000 or 5000 ppm
0-250, 500, 1000 ppm
50, 100, 500 ppm
50, 100, 500 ppm
1000 ppm
0-50% LEL
0-500, 1000 ppm
10,000 ppm
SPECIFICATIONS
Dimensions
Storage Temperature
Power
Power Usage
Readout Range
Alarms
Alarm Point
Panel Controls
Weight
5"W X 8"H X 4"D
-10°F to + 150°F (-20°C to + 65°C)
115 ± 10 V AC, 50-60 Hz or 24 VDC
3.5 watt maximum
ppm, %LEL, or both
alarm light (red), fail light (yellow),
audio sound alarm (steady tone)
variable setting in the meter
zero, span alarm setting, test and alarm
check switches
1.5 lbs. (sensor on controller type) 12 lbs.
(remote sensor type)
www.davis.com
P
Gas Detection / Environmental
Cat. No. Model
1055
Multi-Point Gas Monitor/Controller
NIST
it
For Hazardous Gas Systems
AutoCal Transmitters
MPT AutoCal transmitters
are intended for installation requiring the continuous monitoring of ambient atmospheres or
confined spaces where personnel
might be exposed to toxic, combustible, oxygen depleted or enriched atmosphere.
The MPT AutoCal transmitters output 4-20mA signals compatible with most controller systems and SCADA systems regardless or manufacturer.
Transmitters are currently
available for CO, O2, H2S, CH4,
NO2, SO2, & CL2. Models for
HCN, HCL and NH3 are scheduled for introduction. Consult
for specifications.
The intrinsically safe MPT
AutoCal transmitters are easily
calibrated or zeroed by one technician. Simply attach the cal
connector and flow gas. Remove
the cal connector when the green
light on the transmitter relights
indicating the instrument is
functioning properly.
• DISPLAY: The large, high quality (4 x 16
character) LCD can be set to read one
transmitter or to scan through all transmitters simultaneously. If an alarm occurs
while in the SCAN mode the unit will display only the channel(s) registering an
alarm condition
Gas Detection / Environmental
P
1056
• ALARMS: Two levels of alarm (warn and
danger) are offered with the choice of
latching or non latching alarm relays.
When in the the latched mode an alarm
relay would remain activated until
acknowledged, even though gas levels
has fallen below the alarm point. A built
console alarm is included and remote
location horns are optional
• SYSTEM INTEGRATION: The MPC
controller offers great reliability and ease
of use as a stand alone system or integrated into larger plant wide controllers or
SCADA systems. The RS232 port allows
communication with any remote computer or controller. Custom software is
required
• SYSTEM OUTPUTS: The MPC is
equipped with three internal relays.
These are for system fault, warn and
danger. An optional 16 relay accessory
panel may be specified to provide separate alarms (warn & danger) for each of
the eight channels
• ENCLOSURES: The wall mounted
Nema 4X enclosure is water, oil, dust
and chemical resistant and designed for
rugged applications
Catalog No.
Model
Description
Price
DN521713
MPC
Multi-Point Controller with horn,
holds up to 8 Transmitters
$1,400.00
Transmitters
DN521714
MPT1
O2 Transmitter
DN521715
MPT3
H2S Transmitter
DN521716
MPT4
CO Transmitter
DN521717
MPT5
CH4 Transmitter
DN521718
MPT6
NO2 Transmitter
DN521719
MPT7
SO2 Transmitter
DN521720
MPT8
CL2 Transmitter
(All Transmitters come with 25 ft. of cable)
700.00
750.00
750.00
750.00
900.00
900.00
900.00
Options
DN521721
DN521722
—
—
Additional cable up to 2000 ft. (price per foot)
2.10
Heated sensors (for temp below 36°F)
100.00
Please inquire for NIST Certification
SPECIFICATIONS
Model MPT AutoCal
MPT 1
MPT 3
MPT 4
MPT 5
Gas Detected
O2
H2S
CO
CH4*
Range
0-30%V
0-50ppm
0-500ppm
0-100%LEL
Sensor Type
Electrochemical sensor
Catalytic**
Response
90% reading in less than 30 seconds
Accuracy
± 1%V
± 1ppm
± 1ppm
± 1%LEL
Operating Unheated
32°-120°F
15°-120°F
32°-120°F
-20°-130°F
Temp.
Heated
0°-120°F
-10°-120°F
0°-120°F
Humidity
0-99% RH intermittent/35-90% RH continuous
0-100%
Sensor Life
11⁄2 -21⁄2 Years (1 Year Warranty)
*Other combustibles (butane, propane, pentane, etc.)
**Catalytic beaded platinum pair
Davis Inotek Instruments
MPT 6
MPT 7
NO2
SO2
0-100 ppm
0-100ppm
Electrochemical sensor
MPT 8
CI2
0-20ppm
± 1ppm
± .5ppm
± .2ppm
15°-120°F
15°-120°F
15°-120°F
-10°-120°F
-10°-120°F
10°-120°F
0-99% RH intermittent/35-90% RH continuous
www.davis.com
Multi-Channel Gas Leak Detector/Alarm
NIST
it
The detector system includes sensor, and the controller in the NEMA type 4
enclosure for indoor and outdoor installations. The controller includes the individual module, master module,
power module, and/or blank
module.
Standard Individual module includes Power Green
LED, Alarm Red LED, Fail
Yellow LED and Meter (ppm
or % LEL). The Master
Module includes Test Switch.
The Power module includes
Power and Reset Switches.
Each channel has 50 feet
3 conductor wire cable and
explosion-proof housing for
sensor connection.
GAS SELECTION CHART
Gas
SO2
CO
NH3
Hydrocarbon
H2
Combustibles
Range
0-100 ppm
0-250 ppm
0-100 ppm
0-1000 ppm
50% LEL
0-100% LEL
0-50,000 ppm
*Freon
0-250, 1000 ppm
*H2S
0-50 ppm
Ethylene Oxide
10, 250, 1000 ppm
Additional ranges are available, Please inquire
Catalog No.
Model
Pictured with 8 Channels in supplied NEMA 4 housing
Description
Price
Please inquire for NIST Certification
Davis Inotek Instruments
SPECIFICATIONS
Temperature Range
Repeatability
Meter Range
AC Power Input
Alarm Circuit
Audio Alarm Outputs
-15°C to + 75°C (+ 5°F to + 165°F)
+ 2%
ppm, % LEL
115 ± 10VAC/220VAC 50/60Hz or 24 VDC
Fail, Alarm
95dB at 20cm, sound 30 seconds, (pulsed tone)
UL-Listed
LED Indicators
Power lamp (Green), Fail lamp (Yellow),
Alarm lamp (Red)
Panel Controls
Zero Adjust, Span Adjust, Alarm Setpoint, Alarm
Reset switch, Test switch
Power Consumption =3.5 watts per channel
Contacts
NO, COM, NC: SPDT 7A at 220VAC, 7A at 24VAC
Dimensions
16"W x 16"H x 8"D (4 Channel)
20"W x 16"H x 8"D (8 Channel)
24"W x 20"H x 8"D (10 Channel)
Weight
20LB's - 4 Channel
40LB's - 8 Channel
50LB's - 10 Channel
Panel Box
NEMA type 4 panel enclosure
Cable Length
#22 or #20AWG Shield, 3 conductor cable,
up to 600 feet, or longer
Recorder Output
0-1VDC, or 4-20mA (500Ω Load max.)
(optional)
Warranty
1 Year
System includes Nema 4 housing and remote sensors with 50 ft. of cable
www.davis.com
P
Gas Detection / Environmental
UP7901900
X201
1-Channel Gas Detector
$1,440.00
UP7901901
X202
2-Channel Gas Detector
2,345.00
UP7901902
X203
3-Channel Gas Detector
3,140.00
UP7901903
X204
4-Channel Gas Detector
3,930.00
UP7901904
X205
5-Channel Gas Detector
4,995.00
UP7901905
X206
6-Channel Gas Detector
5,790.00
UP7901906
X207
7-Channel Gas Detector
6,580.00
UP7901907
X208
8-Channel Gas Detector
7,375.00
UP7901908
X209
9-Channel Gas Detector
8,330.00
UP7901909
X210
10-Channel Gas Detector
9,125.00
When ordering please specify gas type from the above selection chart
Accessories and Options
UP79019101
9200-10
*Freon Sensor option
270.00
UP79019102
3200-10
*SO2 Sensor option
270.00
UP790912
—
0-1VDC or 4-20mA Signal
100.00
output per channel
* Note: For Freon and Sulfur Dioxide monitoring systems, add a sensor option for
each system channel
1057
Safety Area Monitor for Oxygen/Toxic Gas Monitor
The Safety Area Monitor is an affordable and effective device to
monitor any space or area for toxic gases or Oxygen levels, without
investing a great deal of time and money. Using state of the art sensors
and electronics, SAM provides maximum features to ensure worker
safety and protection.
Gas Detection / Environmental
P
1058
Oxygen with 19.5% low & 23% high alarms
Carbon Monoxide, 25 ppm alarm (CA OSHA)
Carbon Monoxide, 35 ppm alarm
Hydrogen sulfide, 10 ppm alarm
Ammonia, 25 ppm alarm
Chlorine, 0.5 ppm alarm
Nitrogen dioxide, 3.0 ppm alarm
Calibration Kits/Accessories
LMKITCL2
LMKITCO
LMKITH2S
LMKITNH3
LMKITNO2
LMX493
SPECIFICATIONS
Dimensions
Weight
Connections
6" x 6" x 4"
2 lbs. 8 oz.
2, 1⁄2" NPT threaded
conduit inputs
24 VDC
Diffusion Models
Catalog No.
Price
Internal Pump Models
Catalog No.
Price
LMX0201N
LMXC008N
LMXC009N
LMH2S07N1
LMNH308N1
LMCL204N1
LMNO206N1
LMX0201P
LMXC008P
LMXC009P
LMH2S07P
LMNH308P
LMCL204P
LMNO206P
$949.00
949.00
949.00
949.00
1,225.00
1,045.00
1,225.00
UNI-KIT-CL2Calibration Kit for Chlorine (CL2)
UNI-KIT-COCalibration Kit for Carbon Monoxide (CO)
UNI-KIT-H2SCalibration Kit for Hydrogen Sulfide (H2S)
UNI-KIT-NH3Calibration Kit for Ammonia (NH3)
UNI-KIT-NO2Calibration Kit for Nitrogen dioxide (NO2)
AC Power Supplies and Cable 120 VAC
it
• Seven character (1⁄2") backlight,
LCD display
• Simple to Operate
• Re-configurable Sensors
Any available sensor assembly can
be interchanged in minutes, providing flexibility for future/alternate
applications
• Automatic Sensor Recognition
• Automatic Zeroing
Automatically zeroes toxic sensors
to nullify small differences in sensor output, and sets O2 range to
20.9%, on Oxygen units
• Selectable Alarm Levels
• Peak Mode
• Rugged and Durable
• Multiple Alarm Indications
Audible alarm (> 100 db @ 1 ft.),
bright Red LED and flashing display, indicate unsafe gas levels.
Additionally, a Yellow LED indicates
Low alarm warning, and a Green
LED will indicate system malfunction. See below for remote alarm
options
• Accuracy:
Oxygen - 0.5% by volume
Toxics - 10% of applied gas
concentration
• Relay Output
3 dry contacts (Alarm, Warn, Fail);
rated 30W, max.
250 VAC - non inductive
• Optional Internal Pump
• Optional Remote Sensor Available
Power Supply
Description
NIST
$1,299.00
1,299.00
1,299.00
1,299.00
1,575.00
1,395.00
1,5,75.00
300.00
175.00
250.00
300.00
300.00
150.00
Optional AC adapters (Euro and UK standards) available for SAM.
Please inquire for NIST Certification
Davis Inotek Instruments
www.davis.com
Control Room Oxygen Safety Monitor
NIST
it
Features 2 Oxygen Alarm Levels for Caution and Danger Levels
The Model 335 Oxygen Monitor
is designed to accurately measure
the oxygen concentration in such
applications as control rooms,
closed atmospheres, critical breathing circuits, and other situations
that require the fail safe monitoring of ambient air. The AC powered
instrument is provided with a power fail back up system consisting of
2 NiCad battery packs maintained
on a “trickle” charge. Primary power interruption and sequential battery operation is signalled by illumination of a LOW AC panel light.
Illumination LOW BATT light indicates that the batteries have been
discharged to a dangerous level.
Two oxygen alarms can be set:
CAUTION (20% oxygen) and DANGER (19.5% oxygen). Both alarm
set points are factory set internally
to prevent tampering or resetting
by unauthorized personnel. When
an insufficient oxygen concentration triggers an alarm, both the red
panel light and an audible enunciator are energized. The alarms remain energized until the oxygen
concentration has been elevated
above the trigger point.
Calibration
SPECIFICATIONS
Range
Sensitivity
Accuracy
Operating
Temperature Range
Power Requirement 110 VAC, 50/60 Hz, <30 W
(220 VAC/50/60 Hz optional)
Power Fail
Two NiCad battery packs
Battery Pack
(maintained on “trickle” charge)
Micro Fuel Cell
Class B-3—12 month warranty
Electronics
Solid state, integrated circuit
Alarms-Oxygen
Two adjustable (factory set) alarm set points and
form “C” relay contacts (SPDT) rated at 3A resistive
(fail safe non latching operation) CAUTION (20%
O2) and DANGER (19.5% O2)- built in audible
and visual indicators. Set point adjustment
CAUTION—18% to 25%, DANGER—15% to 20%
(customer specify)
Alarms-Power
AC power-fail alarm (red LO AC panel indicator);
battery low-charge alarm (red LO BATT panel
indicator)
Features 2 oxygen alarm levels for caution and danger levels
A battery test push button is provided to
visually check conditions of the batteries.
Periodic calibration can be quickly and easily accomplished with the calibration adapter
and a locking calibration control. The Model
335 uses a patented microfuel cell oxygen
sensor which provides a linear output that is
proportional to oxygen concentration. The
sensor responds to even the slightest change
in concentration within a few seconds. Its
sealed electro chemical design is completely
maintenance free. At the end of its useful
life, the sensor is disposed of like a flashlight
battery.
Catalog No. Model
Description
Price
TL92501
TLB3
Oxygen Safety Monitor
Replacement Fuel Cell
$1,780.00
107.00
335
B3
Please inquire for NIST Certification
Davis Inotek Instruments
www.davis.com
P
Gas Detection / Environmental
0-25% O2
0.5% of full scale
± 2% of full scale at constant temperature. ± 5% of
reading or ± 2% of full scale, whichever is greater,
throughout operating temperature range
+ 32°F to + 122°F (0°C to + 50°C)
1059
Respiratory Air Monitors
NIST
• Meets OSHA requirements for Compressed Air
• Continuous monit ring of breathing air
• Optional oxygen or Dew Point monitoring
• AutoCal Calibration
• Multiple filter panel options
SPECIFICATIONS
Gases
Carbon Monoxide
Oxygen
Ranges
CO
0 to 1000 ppm
0 to 25% volume
0
Dew Point
-70°F to + 70°F
(-56°C to + 22°C)
Air Temperature
+ 32°F to 149°F (0°C to 65°C)
>2 years
Expected Sensor Life
O , CO
Dew Point
> 2 years
Display
LEDs and digital LCD
Adjustable Alarm Points CO
5ppm CO & 10 ppm
19.5% vol. & 23.5% vol.
0
Dew Point
39°F (4°C)
Alarms
Visual - LEDs and digital LCD
Audible - Case mounted horn
Relays - Two dry contact
Airline Input
1/2" feed - standard pressure 70-150 psi
Sample Flow Rate
0.5 cubic feet of air per hour (scfh)
Power Source
110V AC or 12V DC
Temperature Range
32°F to 105°F (0 to 40°C)
Dimensions
7.3 X 5.9 X 4 inches (L x W x D)
(185 x 150 x 101 mm)
2
2
2
Gas Detection / Environmental
P
1060
Catalog No.
GF4021
GF40211
GF40212
Model
it
The ABL 4021 AutoCal series is the unit of choice
where specific and accurate measurement of carbon
monoxide, oxygen or dew point levels are required.
Designed to meet OSHA requirements for monitoring
Grade D respirable air, this unit is equipped with a reliable electrochemical sensor that accurately indicates the
level of carbon monoxide on an illuminated liquid crystal
display. Adding versatility, this unit offers optional oxygen or dew point sensors for applications where detection
or measurement is needed. Calibration and maintenance
are simple with out innovative AutoCal system.
Additional features including alarm relay contacts, user
adjustable alarm point, low flow alarm indicator and
many more make this unit an intelligent choice. The ABL
4021 is available in three models, the 4021 (CO), 4021-1
(CO and O2) and 4021-DP (CO and dew point levels). All
models may be purchased with or without airline filter
systems.
ABPM Wall Mounted Filter Panel Option
8025 (25 CFM), 8050 (50 CFM) and 8100 (100 CFM)
The 25, 50 or 100 CFM panel filters out dangerous toxins from supplied air sources and ensures clean, breathable air. The three-stage filter system efficiently removes
particulates, oil vapors, and hydrocarbons from an air
supply. After filtration the regulator sets the pressure for
the respiratory equipment and the manifold assembly
provides multiple outlets for airline hose quick connections. The model 8025 includes two user female quick
connection outlets. A 1/2" FTP connection is standard for
all models.
Carry-Air Portable Filter Panel Options
9114 (100 CFM)
The portable version of the three stage 100 CFM filter
panel includes both the ABPM wall mounted filter panel
system and a respiratory air monitor on a convenient
metal carrying stand. With a standard 1/2" FPT inlet connection the 9100 can be fitted to supply a number of workers. The standard four user outlets can be increased to
eight, and additional splitter manifolds can be attached to
the system to accommodate CFM requirements of up to a
total of 100 CFM of air.
Description
Price
4021
4021-1
4021- D{H
AutoCal Respiratory Air Monitor with Carbon Monoxide (CO) sensor
AutoCal Respiratory Air Monitor with Carbon Monoxide (CO) and Oxygen sensors
AutoCal Respiratory Air Monitor with Carbon Monoxide (CO) and dew point sensor
(for medical breathing air applications)
$1450.00
1,600.00
2,700.00
7750-001
7802-001
7802-006
5503-020
5701-011
5503-035
8025
8050
8114
8118
9114
AutoCal Series Calibration Kit
Replacement test gas - 20 ppm CO (Sold Individually)
Replacement test gas - zero gas (Sold Individually)
Replacement Carbon Monoxide (CO) sensor
Replacement Oxygen (0 ) sensor
Replacement dew point sensor
25 CFM wall mounted filter panel (2 ports)
50 CFM wall mounted filter panel (4 ports)
100 CFM wall mounted filter panel (4 ports)
100 CFM wall mounted filter panel (8 ports)
100 CFM portable filter panel on metal stand (4 ports)
150.00
60.00
60.00
260.00
115.00
420.00
630.00
735.00
1,200.00
1,350.00
1,600.00
Accessories
GF7750
GF7802
GF78026
GF5503
GF5701
GF55035
GF8025
GF8050
GF8114
GF8118
GF9114
Davis Inotek Instruments
2
www.davis.com
NIST
Multi Gas Analyzer Pump
You can accurately measure
over 200 gases and vapors quickly with
The High-Precision Gas Sampling System. The
actual operation is simple and accurate. Just snap off
both “break-away” ends of a tube, insert the tube into the
hand-held pump, and pull the pump handle out.
As the handle is pulled (just like a syringe), a precisely-measured
volume of ambient air is drawn inside the tube where it contacts the
reagent.
Instantly, the reagent changes color. The reagent reacts quantitatively to provide a length-of-stain indication. The farther the colorstain travels along the tube, the higher the concentration of gas. Note
the calibration mark on the tube at the point where the color stain
stops, and that’s the measurement. It’s safe, precise, and fast.
• Broad range of directreading tubes for over 200
substances
• Sensitive and stable
absorbing media provides
for up to three years shelf
life
• Precision piston pump
without springs: provides
an accurate measurement
upon which you can rely
Catalog No.
Model
Description
SD150701
GV100S
Multi-Gas Analyzer Kit, includes pump, carrying case, spare parts and instructions
it
• “Fail Safe” locking handle
eliminates incomplete
samples
• Corrosion-resistant metal
alloy construction
• Tube tip breaker is
standard
• No flow-rate orifice that
clogs or leaks
• Most tubes require only
one pump stroke
Price
$275.00
Detector Tubes, 10 per pack
Catalog
No.
Measuring
Range
Acetic Acid
Acetone
Acetylene
Ammonia
Ammonia
Arsine
Benzene
Bromine
Butane
n-Butyl Acetate
n-Butyl Alcohol
Carbon Dioxide
Carbon Dioxide
Carbon Dioxide
Carbon Monoxide
Carbon Monoxide
Carbon Monoxide
Carbon Monoxide
Carbon Monoxide
Chlorine
Chlorine
Chloroform
Cyclohexanol
Ethyl Acetate
Ethyl Alcohol
Ethylene
Ethylene Oxide
SD150702
SD150703
SD150704
SD150705
25 ppm (35 ppm)
SD150706
SD150707
SD150708
SD150709
SD150710
SD150711
SD150712
SD150713
5000 ppm (30,000 ppm)
SD150714
SD150715
SD150716
25 ppm
25 ppm
SD150718
0.1 ppm (0.3 ppm)
SD150719
SD150720
SD150721
SD150722
SD150724
SD150726
1-80ppm
.01-2.0%
0.1-4.0%
10-1000ppm
5-260 ppm
0.05-5ppm
2.5-120ppm
2-23ppm
25-1400ppm
0.01-0.8%
5-150ppm
2.5-40%
0.13-6%
100-4000 ppm
1-40
0.05-4.0%
5-2000ppm
1-50 ppm
5-1000ppm
25-1000ppm
0.05-2 ppm
4-400ppm
5-100ppm
0.04-1.5%
0.02-7.5%
50-800ppm
0.05-3.0%
Ethylene Oxide
SD150727
0.4-100ppm
Davis Inotek Instruments
Price/
Pack
$45.00
45.00
45.00
45.00
52.00
45.00
45.00
45.00
45.00
45.00
45.00
45.00
45.00
52.00
45.00
45.00
45.00
52.00
52.00
45.00
52.00
45.00
45.00
45.00
45.00
45.00
45.00
45.00
Gas to be
Measured
Catalog
No.
Measuring
Range
Ether
Ethyl Mercaptan
Formaldehyde
Gasoline
Hydrocarbons (9 tubes)
(propane, butane)
Hydrogen Chloride
Hydrogen Sulfide
SD150728
SD150729
SD150730
SD150731
SD150732
0.04-1.0%
0.5-120ppm
2-20ppm
0.015-1.2%
0.05-2.4%
45.00
45.00
45.00
45.00
45.00
SD150733
SD150734
10-1000ppm
12.5-500ppm
45.00
45.00
Hydrogen Sulfide
LP Gas
10 ppm (15 ppm)
SD150735
.65-150 ppm
0.02-0.8%
52.00
45.00
Mercury Vapor
0.025 mg/m3
0.1-10 mg/m3
52.00
Methyl Ethyl Ketone
Nitric Oxide
Nitrogen Dioxide
Oxygen
Ozone
SD150736
SD150737
SD150738
SD150739
SD150740
0.02-0.6%
2-20ppm
0.5-100ppm
6-24%
4-400ppm
45.00
45.00
45.00
45.00
45.00
Ozone
Perchloroethylene
Styrene
Sulfur Dioxide
0.05 ppm
SD150741
SD150742
SD150743
0.05-3 ppm
2-250ppm
10-1000ppm
20-3600ppm
52.00
45.00
45.00
45.00
.25-10 ppm
5-600ppm
2-250ppm
5-250ppm
0.25-20%
10-500ppm
52.00
45.00
45.00
45.00
45.00
45.00
Sulfur Dioxide
2 ppm (5 ppm)
Toluene
SD150744
Trichloroethylene
SD159745
Vinyl Acetate
SD150746
Vinyl Chloride
SD150747
Xylene
SD150748
Additional detector tubes are available, Please inquire
Price/
Pack
Please inquire for NIST Certification
www.davis.com
P
Gas Detection / Environmental
Gas to be
Measured
1061
Investigator’s Gas Detector
NIST
it
For Detection of Hydrocarbons, Petroleum Volatiles, and Gas
SOME ACCELERANTS, HYDROCARBONS & GASES DETECTED
Group A
1. Gasoline
2. Benzene
3. Acetone
4. Kerosene
5. Diesel Fuel
6. Fuel Oil
7. Propane
8. Jet fuel
9. Alcohol
10. Paint Thinner
11. Turpentine
12. Ether
13. Hexane
14. Butane
Ask about
2 Year
Group B
15. Carbon Monoxide
16. Ethane
17. Pentane
18. Hydrogen Sulfide
19. Freon 11
20. Ethylene Oxide
21. Ammonia
22. Methane
23. Methanol
24. Vinyl Chloride
25. Methyl Chloride
26. Methylene Chloride
27. Trichlorethane
28. Trichlorethylene
29. Sulfur Dioxide
30. Freon 12
31. Freon 21
32. Freon 22
33. Freon 113
34. Freon 502
35. Formaldehyde
36. Vinyl Chloride
37. Methyl Mercaptan
38. Methyl Ethyl Ketone
39. Methyl Acetate
40. Dimethyl Amine
41. Ethanol
42. Ethylene
NIST
43. Hydrogen
44. Ethylene Oxide
45. Chloropicrin
46. Halon 1211
47. Halon 1301
48. Acrylonitrile
49. Naphtha
Save 50%
on 2nd year
recalibration
The Model 850 Investigator’s Gas Detector incorporates advanced signal processing techniques in combination with a ruggedly constructed detector to bring you the most advanced
survey tool available. This unit will detect the presence of hydrocarbons that may be at the fire
scene and is equally effective as general purpose gas detector. It is capable of detecting gas
leaks of less than 1cu. ft. per year or gas concentration of less than 50 parts per million. The
Model 850 is simple to operate: simply pull out retractile sensor probe, allow several minutes
for warm up, then scan area of concern holding sensor approximately 1/2" from suspect material while observing meter. If a hydrocarbon is present, a deflection of the meter will occur, followed by a series of beep tones in synchronism with two indicator lights (red LED’s). The more
aerosol born particles that exist, the more volatile the hydrocarbon is and the faster the beep
will become. The Model 850 is equipped with a high/low range switch that permits detection of
extremely small amount of hydrocarbon. Because the 850 has a retractile probe sensor, it can
be easily used while walking around an area of concern. This feature makes the 850 useful as
a survey tool for detecting leaking underground storage tanks (LUST) or gasoline leaks that
have seeped into sewer lines. The 850 is equally effective for detecting methane out gassing,
inspecting pipelines and a host of other applications.
Catalog No.
Description
GR312850
Investigator’s Gas Detector
Price
$989.00
Please inquire for NIST Certification
• Continuously samples the air in your home or office and alerts you
when the concentration of Volatile Organic Compounds (VOC’s)
reaches a harmful level
• Easy to use — just plug it into an electrical outlet and place the unit at
“nose level”
• Graphic display shows the levels of VOC’s providing a quick and easy
method to view the air quality
• Pre-set to a medium sensitivity level; however, it can be adjusted to be
more or less sensitive depending upon the user’s specific needs and
lifestyle.
• An air quality alarm sounds when the air quality falls below a set level
• Has a choice of sampling interval rates
• A backlight for easy viewing in low light, and an indoor thermometer
with humidity percentage reading
Gas Detection / Environmental
P
Air Quality Monitor
1062
Davis Inotek Instruments
Catalog No. Model
Description
RG112
Air Quality Monitor
AR112C
Price
$199.00
www.davis.com
VOC Monitor/Datalogger
NIST
it
Multi-gas VOC Detector & Quantitative Sampler with built-in Datalogger & Pump
Gases and Vapors the SXC-20 Will Detect
Acetaldehayde
Acetone
Acetonitrile
Acetylene
Allyl alcohol
Ammonia
Arsine
Benzene
Butane
2-Butanone (MEK)
2-Butoxyethanol
Butyl alcohol
Carbon monoxide
Carbon tetrachloride
Chlorobenzene
Chloroform
Chloroprene
Cumene
Cyclohexane
Cyclohexanol
Cyclohexanone
Dichloroethyl ether
Diacetone alcohol
Diborane
1,1 Dichloroethane
1,2 Dichloroethane
Diethylamine
Diethylamino ethanol
Disobutyl ketone
Dimethylamine
Dimethylformamide
Dinitrobenzene
Dinitrotoluene
Ether
2-Ethoxyethanol
Ethyl alcohol
Ethylamine
Ethyl benzene
Ethyl bromide
Ethylbutyl ketone
Ethyl chloride
Ethyl ether
Ethyl formate
Ethylenediamine
Ethylene dichloride
Ethylene oxide
Formaldehyde
Frfuryl-alcohol
Gasoline/Diesel fuel
Heptane
Hexacholorethane
Hexane
2-Hexanone
Hydrogen
Hydrogen bromide
Hydrogen chloride
Hydrogen cyanide
Hydrogen sulfide
Isoamyl alcohol
Isobutyl alcohol
Isopropyl alcohol
L.P. gas
Methane
Methyl alcohol
Methyl butyl ketone
Methylamine
Methyl cellosolve
Methyl chloride
Methyl chloroform
Methylcyclohexane
Methylcyclohexanol
Methylene chloride
Methyl ethyl ketone
MIBK (Hexone)
Methyl mercaptan
• Adjustable audible alarm
• Portable, battery operated for 8
hour sampling
• Light (less than 2 lbs.) and small
(4.2" x 4.6" x 2.4")
• Multi gas sampling -- over 100
VOCs detectable
• Semi-conductor detector with rapid
response
• Color Bar display. Bright greenyellow-red shows hazard levels
• Built-in Datalogger, supports both
DOS and Windows. Records VOC
levels and tracks times of
occurrences
Naptha
Napthalene
Natural gas
Nitro benzene
Nitrochloro benzene
Nitroethane
Nitrotoluene
Pentane
2-Pentanone
Perchloroethylene
Pet. distillates
Phenylether
Phosphine
Propane
Propylene oxide
R-11 R-12 R-22
R-502
Silane
Sulfur
Sulfur dioxide
Toluene
1,1,1, TCE
1,1,2, TCE
Trichloroethylene
Xylene
• Adjustable flow rate pump to
provide “active” rather than
passive environmental sampling
• 110V connection to give 24 hour
per day, 7 day per week
monitoring
• Automatic quantitative sampling as
second pump is turned on when
preset gas level has been
reached. This provides standard
charcoal, absorber and
colorimetric tube sampling
• Detects down to OSHA, EPA and
other regulatory-mandated levels
Catalog No. Model
PX0051001
Description
Price
SXC-20
VOC Monitor/Datalogger with
$1,400.00
battery charger and AC adapter
Please inquire for NIST Certification
VOC Gas Sensors
NIST
it
• Highly sensitive to solvent vapors
and other VOCs
• Bright green-yellow-red display
clearly shows hazard level of gas
or vapor
• Model C-20 also features audio
alarm and data logging connection
• Detects down to OSHA, EPA, and
other regulatory-mandated levels-typically at low ppm
concentrations
• Has built-in rechargeable battery
for portable use in tracking leaks
• Rugged construction with many
safety features
SPECIFICATIONS
Catalog No. Model Description
ECS31801
ECS31802
C-12
C-21
VOC Gas Sensor
VOC Gas Sensor with audio alarm
and provision for external alarm
and datalogger
Please inquire for NIST Certification
Davis Inotek Instruments
Price
$249.00
295.00
Sensitivity
Response time
Size
Weight
Battery life
Power requirements
Measurement principle
5 to 8 ppm (depending on gas)
Within one minute of gas reaching sensor
31⁄4" x 13⁄8" x 23⁄8" (85 x 35 x 60 mm)
5 oz (140 grams)
Over 2 hours per charge
120VAC, 12VDC or built-in NiCad battery
Semiconductor sensor
www.davis.com
P
Gas Detection / Environmental
VOC Gas Sensors
For paint shops, printers, dry cleaners, wood workers,
vehicle repair facilities, chemical production areas and
wherever indoor air quality monitoring is required.
The Eco Sensors ™ Model C-12 and C-21 gas sensors
help you comply with the new VOC air quality regulations for hydrocarbon gases and solvent vapors
1063
Freon and Hydrogen Detectors
NIST
it
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
Gas Detection / Environmental
P
• Rugged, compact, lightweight
with leather carrying case
• Uses a UL approved solid state
sensor with 1 year warranty
(estimated life over 10 years)
• Accurate low ppm reading or
% LEL reading
• Low battery warning light
• Measurements from unit can
be coordinated with laboratory
testing equipment
• Audio/visual alarms
• Built in battery charger
• High poison resistant to
sulphur, lead, silicone, and
halogenated compounds
Catalog No. Model
Description
UP75206
UP75208
Hydrogen Detector
0-50% LEL
Freon Detector for 22, 113, 123, 0-250ppm
134A and many others
7200P
9200P
Range
1,265.00
1,350.00
Calibration Gas Mixtures
UP7200
7200-10-1LEL Hydrogen 50% LEL/Air
475.00
The Calibration Kit will include: one sample gas, one zero gas cylinder, one regulator and case
Please inquire for NIST Certification
1064
Price
Davis Inotek Instruments
SPECIFICATIONS
Controller
Dimensions
Operating Temp.
Weight
Power
Power Usage
Battery Signal
Operating Hours
Meter Range
Alarms
Panel Control
Battery Charge
Warranty
5"W x 8"H x 3"D
-10°F to + 150°F (-20°C to + 65°C)
2.0 lbs
3.6V Ni-Cad battery
2.0 watt maximum
yellow LED indicates low battery
12 hours continuous (minimum)
ppm, % LEL, or both
audio buzzer 75dB. Alarm lamp (red LED)
zero and span adjustments
built in battery charger
circuitry 1 year, battery 6 months
www.davis.com
Ozone Monitor
NIST
it
NIST
it
• Constantly monitors your work environment. Ozone concentration
shown by a multicolor graphical display from green (safe) to yellow
(caution) to red (danger)
• No installation required. Easily understood by non-technical personnel
• Field work and “walk around” analyzes possible via power from internal rechargeable batteries
• Compatible with other Eco Sensors VOC and ozone sensing, monitoring, and control products
• Lowest cost
SPECIFICATIONS
Range
.02 - .14 ppm of ozone
Measurement Principle HMOS (heated metal oxide semiconductor)
sensor
Size
85 x 35 x 60 mm (3 1⁄4 " x 1 3⁄8 " x 2 3⁄8 ")
Weight
154 grams (6 oz.)
Batteries
Self-contained NiMH. Approximately 8 hour
capacity. Recharged by AC adapter overnight
Catalog No. Model
Description
ECS10
Ozone Monitor
EZ-1X
Price
$330.00
Ozone Switch
• Contractor-friendly installation
• Low maintenance
• Operates from easily available 12-24 volts DC or from AC adapters
available world-wide
• “Dead band” to avoid system “chatter”
• Set-point adjustable by the installer but not by the room occupants
P
Gas Detection / Environmental
SPECIFICATIONS
Range and Accuracy
.03-.1 ppm of ozone. (Higher range by request).
Approximately 20% Accuracy
Measurement Principle Advanced design HMOS (heated metal oxide
semiconductor) sensor
Size
3" x 2 1⁄2 " x 1 5⁄8 " (76 x 64 x 42 mm)
Weight
5 oz. (140 grams)
Power requirements
12-24 volts DC, 300 mA. AC adapters available
Output control
SPDT non-latching relay. Contacts rated at 5
amps, 250 volts AC, or 1⁄8 HP inductive load
Connections
5 Circuit totally enclosed terminal block for relay
output and DC input. Also, 2.5 mm DC power
jack for AC adapter
Not recommended for outdoor use or in presence of acid gases.
Catalog No.
Model
Description
ECS11
OS-1X
Ozone Switch
Davis Inotek Instruments
Price
$385.00
www.davis.com
1065
Mini Ozone Monitor/Calibrator
NIST
it
The portable ozone sensors provide a reliable
and inexpensive way of checking generators,
valves, piping and general environments for ozone
leaks and comparative levels.
• Small size and high sensitivity due to HMOS
(heated metal oxide semiconductor) sensor
• Digital readout 0 to 10 ppm
• Linearity ± 0.05 ppm
• Sensitivity 0.01 ppm
• Rechargeable battery lasts 7 to 8 hours
• Very simple operation
• Size – 2" x 4" x 1" (50 x 100 x 25 mm)
• Weight – 5 ounces (142 grams)
• Response in only 10’s of seconds
• Automatic zeroing
• Ease of calibration and service
• Belt carrying case and charger included
Catalog No. Model
Description
Price
ECS41800
A-21ZX
$750.00
ESC41801
OG-2
Ozone Monitor with
carrying case and charger
Battery Ozone Source
Calibrated at .1 ppm
385.00
Please inquire for NIST Certification
NIST
Continuous Ozone Monitor with Alarm
Gas Detection / Environmental
P
1066
it
For water treatment plants, pulp bleaching mills,
ozone generator monitors, photocopier and laser
printer centers, fumigation projects, HVAC and indoor
air quality systems. Vehicular pollution monitors,
research labs and pilot plants, and wherever ozone exposure is possible.
The C-30ZX has a very fast and continuous response. It is rugged and versatile. There are no touchy
controls.
• LED readout changes color as
ozone level increases
• Audio alarm and output for
Datalogger
• Connections for external
equipment control
• For general monitoring and for
ozonator control
• Constantly monitors your work
environment. Shows the situation
by a multicolor graphical display,
and alarms when there is a health
hazard.
• No installation typically required.
Easily understood by non-technical
personnel
• Virtually no maintenance
SPECIFICATIONS
Range
Bargraph display
Response time
Measurement principle
Size
Weight
Power requirements
Outputs
0.01 to 0.14ppm of ozone (LED scale);
0.01 to .3 ppm via external data readout
Normally green, yellow at 0.05 ppm (caution), red at
0.1ppm (danger).
Within a few seconds of ozone reaching the sensor
HMOS (heated metal oxide semiconductor) sensor
31⁄4 " x 13⁄8 x 23⁄8 (85 x 35 x 60 mm)
5 ox (140 grams)
120 volts AC 60 Hz or 12 volts DC at 400 ma.
LED bargraph, audio alarm, 0-2+ analog voltage output
such as for Dataloggers, and external alarm relay
contacts. Alarm actuation and relay contact closure
at 0.1 ppm
Davis Inotek Instruments
Catalog No.
Model
Description
ECS31805
ECS41802
C-30ZX
EE-2
Continuous Ozone Monitor with alarms
Environmental Enclosure
Price
$525.00
295.00
www.davis.com
Vaisala Hand-Held Carbon Dioxide Meter
CO2 Meter For Spot Measurements
NIST
it
Ask about
2 Year
The GM70 Hand-held Carbon Dioxide meter incorporates
the CARBOCAP technology, which enables stable and reliable
measurement. GM70 has a versatile menu based user interface , a clear graphical backlit LCD display and data-logger
function. GM70 is configurable and it has a wide selection of
measurement ranges, from low concentrations up to 20% 0f
CO2.
Due to its short warm-up time, GM70 is ideal for spotchecking measurements. The meter can also be used as a tool
for checking the fixed GM20 and GM220 Series CO2 transmitters. In addition, the GM220 Series transmitters can be adjusted by using GM70.
Optional, ready to use Windows® software provides an easy
way to handle measurement data in th PC environment.
A built-in power saving feature extends battery operation
time during data-logging, making it possible to collect CO2
data at locations without main power.
NIST
Save 50%
on 2nd year
recalibration
• Flexible measurement
• Interchangeable probes
• One or two probes
• Both numerical and graphical measurement data
• User friendly meter
• Data-logging and data transferring capability
• Lightweight construction
• Long-term stability
• Various applications spot-checking instrument
• Calibration and adjustment of fixed CO2 instruments
SPECIFICATIONS
GMH70 Handle with GMP220 Series CO Measurement Probe
Measured Variables
CO volume concentration (%or ppm)
Measurement Range
High Concentrations
0...2%CO
Short Probe (GMP221)
0...3%CO
0...5%CO
0...10%CO
Low Concentrations
0...2000 ppm CO
Long Probe (GMP 222)
0...3000 ppm CO 0...5000 ppm CO
0...7000 ppm CO
Error at 25°C against certified factory references ( incl. repeatability and calibration uncertainty )
GMP221
<± [ 0.02% CO + 2% of reading ]
GMP 222
<± [ 20 ppm CO2 + 2% of reading ]
Non-linearity
<± 0.5 of FS ° C
Temperature Dependence ( typical )
0.1% of FS / ° C ( excluding the ideal gas law effect )
Pressure Dependence ( typical )
0.15% of reading/hPa ( excluding the ideal gas law effect )
Long-term Instability
<± 0.5% of FS / 2 years
Response Time (63%)
GMP221
20 seconds
GMP222
30 seconds
2
2
2
2
2
2
0...20%CO
2
2
2
2
2
0...10000 ppm CO
2
0...10000 ppm CO
2
2
Model
Description
VA933015
GM70D0C00B
CO2 Meter with probe, 0-2000 ppm CO2
VA933016
GM70D0D00B
CO2 Meter with probe, 0-3000 ppm CO2
VA933017
GM70D0E00B
CO2 Meter with probe, 0-5000 ppm CO2
VA933018
GM70D0G00B
CO2 Meter with probe, 0-10,000 ppm CO2
VA933019
GM70D0H00B
CO2 Meter with probe, 0-2% CO2
VA933020
GM70D0L00B
CO2 Meter with probe, 0-10% CO2
VA933021
GM70D0M00B
CO2 Meter with probe, 0-20% CO2
Options - Please note: adding any of these options will alter your part number
VA933022
—
MI70 Link (software with RS232 cable)
VA933023
—
Analog output - signal cable
VA933024
—
MI70 Link and analog output - signal cable
VA933025
—
Field check adapter
VA933026
—
Carrying case
Please inquire about NIST Certificate
Davis Inotek Instruments
Price
$1,690.00
1,690.00
1,690.00
1,690.00
1,690.00
1,690.00
1,690.00
60.00
35.00
95.00
65.00
140.00
www.davis.com
Gas Detection / Environmental
Catalog No.
P
1067
Bacharach Indoor Air Analyzer
NIST
it
Measures CO2 , Temperature, Humidity, Barometric Pressure & CO (Model 200)
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
The Bacharach Comfort Chek is a versatile
hand held infra-red analyzer ideal for verifying
indoor air comfort and quality. The Comfort Chek
measures CO2, barometric pressure, temperature,
humidity and CO (Model 200). The Comfort Chek
100 features diffusion sampling while the Comfort
Chek 200 has an internal pump for remote sampling and includes CO measurement.
The instrument displays each value separately,
but by pushing the F3 button on the front panel
the user can easily scroll through the readings.
Both models feature built-in data logging with
memory storage of up to 200 readings, “charge +
run”
capability for long term monitoring and an user
zero function for all gases. Power is provided by a
long life, NiMH battery capable of providing up to
10 hours operation from one charge.
The Comfort Chek is small enough to fit in the
palm of your hand, remarkably easy to use and is
ideal for trend analysis and record keeping.
Both analyzers include barometric pressure,
relative humidity, temperature measurement and
data storage capability.
• Weighs only 12oz.
• Data storage and data logging capabilities
• Internal pump
• Up to 10 hours use from one charge
• Recharges in 3 hours
• IrDA communications link for data downloading
• Alarm levels for all gases
• User zero function for all gases
• Supplied with a 110-220 volt charger
Gas Detection / Environmental
P
1068
SPECIFICATIONS
Measuring Ranges
Standard Parameters
Barometric Pressure
Temperature
RH
CO
Barometric pressure range
Weight
Dimensions
Catalog No.
Model
BA248053
BA248054
19-8048
19-8049
2
Description
Comfort Chek 100 w/charger, measures CO2, temperature RH, barometric pressure
Comfort Chek 200 w/internal sample pump, battery charger. Measures CO2,
CO, temperature, RH, barometric pressure
Accessories
BA599476
19-3311
Hard/plastic carrying case
BA193302
19-3302
12 VDC charger, lighter adapter
BA248056
19-3254
Host Software and IrDA link for Data Downloading
BA248055
19-3307
Table Stand - All
Typical Cell Life CO2 Infra-Red 10 years, CO Electro-Chemical 2 years
Please inquire for NIST Certification
Davis Inotek Instruments
CO : 0-10,000 ppm, 10 ppm Resolution
21" Hg to 36" Hg
0-104°F
0-99.9%
0-500 ppm
21" Hg to 36" Hg (10.5 PSI - 18 PSI)
12 oz.
5.5H x 2.5W x 1.4D inches
Price
$1,450.00
1,995.00
100.00
100.00
250.00
50.00
www.davis.com
Bacharach CO2 and N2O Monitors
NIST
it
N2O Monitors
• Continuous datalogging and
stores up to 800 readings
• Two TWA capabilities — real
time/elapsed time
• Readings can be toggled
between TWA/PPM
• No span calibration required —
only zero calibration
• Internal pump for remote
sampling with low flow indicator
• Built in alarm (user activated)
• Rapid detection of changing
N2O levels
• 8 hours operation on a full
charge
• Charge and run capability
• Maintenance free dual
wavelength infrared N2O
sensor
• Two way IrDA communication
link
• Pressure compensated sensor
SPECIFICATIONS — N2O Monitors
Range
Resolution
Warm-Up Time
Sampling Time
Accuracy
Case Seal
Power Source
0-1,000 ppm N2O
5 ppm full range
10 minutes
Once per second
± 10% of reading or 10 ppm, whichever is greater
NEMA 12 (IP65); dust and water resistant
Nickel-metal hydride battery providing up to 8
hours of continuous use
Operating Temperature 59°F - 77°F (15°C - 25°C)
Relative Humidity
0 to 99% (non-condensing)
Dimensions/Weight
5.5” L x 2.6” W x 0.8” H / 7 ounces (200 grams)
Construction
High Impact ABS case
Warranty
1 year - Instrument; 3 years - IR cell
(excluding cell contamination)
CO2 Monitors
• Two sampling modes: sample
draw or diffusion (28-20 only)
• Continuous or snapshot data
logging with the push of a
button
• Probe and hose assembly for
sampling in hard to reach
locations (28-20 only)
• Maintenance free dual
wavelength infrared sensor
• Internal pump provides
continuous sampling with
fast response and accurate
readings (28-20 only)
• Available in two different
ranges: 0-10,000 ppm or 0-60%
These monitors are compact and lightweight.
These instruments have an internal pump allowing the sample to be pulled through a probe and
hose assembly to the sensor. Simply turn off the
pump and the instrument samples by diffusion.
Model No. Description
BA198023
19-8023
BA198025
19-8025
BA197109
Accessories
BA193301
BA193302
BA512978
BA540600
BA599474
BA599476
19-7109
CD 98 CO2 Analyzer (0-10,000 ppm)
$1,270.00
contains instrument, probe & hose assembly,
120/240V battery charger, readout stand and
instruction manual
1,610.00
CD 98 CO2 Analyzer (0-60%) contains
instrument, probe & hose assembly, 120/240V
battery charger, readout stand and instruction
manual
MediGas N2O, Nitrous Oxide Monitor
2,195.00
19-3301
19-3302
19-8027
24-1125
193304
193311
IrDA PC cable interface
In-car charger/cigarette lighter adapter
Calibration Kit
Calibration gas (340 ppm), 17 liters
Rubber boot
Plastic carrying case
SPECIFICATIONS — CO2 Monitors
Range and Resolution
0-50% CO2
(auto ranging)
Response Time
Case Seal
Power Source
Operating Temperature
Relative Humidity
Dimensions
Weight
Construction
Accuracy
0-5,000 ppm CO2- 10 ppm resolution
0-10% - 0.01% resolution
10-50% - 0.1% resolution
T90<10 seconds
NEMA 12 (IP65) (Dust and Water Resistant)
Nickel-metal hydride battery providing up to 8
hours of continuous operation on a 2 hour
charge
32°F to 104°F (0°C to 40°C)
0 to 99%, (Non-Condensing)
5.5" L x 2.6" W x 0.8" H
(140 mm x 66 mm x 20 mm)
7 ozs. (200 grams)
Hi Impact ABS Case
± 5% reading or ± 50 ppm whichever is greater
Davis Inotek Instruments
Price
250.00
100.00
250.00
45.00
75.00
100.00
Please inquire for NIST Certification
www.davis.com
P
Gas Detection / Environmental
Catalog No.
1069
IAQ-CALC ™ Indoor Air Quality Meters
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
NIST
it
TSI's IAQ-CALC™ Meters are exceptional instruments
for investigating and monitoring Indoor Air Quality
(IAQ). The Model 8732 is a cost-effective meter for CO2
measurements. To monitor indoor air quality conditions, the Models 8760 and 8762 simultaneously measure and data log multiple parameters. The Model 8760
measures CO2, temperature, humidity, and calculates
dew point, wet bulb temperature, absolute humidity,
and % outside air. The Model 8762 adds CO
• Stable, low drift NDIR CO2 sensor
• Sampling function records multiple point measurements
• Optional portable printer provides hard copy documentation
Additional Features and Benefits of the Models 8760 and 8762
• Temperature and relative humidity measurements are instrumental for
determining thermal comfort levels
• Calculates % outside air from either CO2 or temperature readings
• Direct calculation of dew point, wet bulb temperature, and absolute humidity —
no psychrometric chart needed
• Electro-chemical CO sensor for measurements made at outdoor air intakes,
HVAC systems and parking garages (Model 8762 only)
• 2-line display showing multiple parameters at the same time
• Optional detachable secondary temperature sensor
Data Logging Capabilities of the Models 8760 and 8762
• Data logging ability allows user to log 14,000 samples with a time and date
stamp
• Simultaneously records all parameters available
• Continuous data logging for full-cycle monitoring and trend analysis
• Data can be reviewed on-screen, printed or downloaded to a computer for
easy report generation
• TSI LOGDAT™ downloading software permits easy transfer of data to a
computer
• LOGDAT™ Companion Excel® Macro automatically graphs your data
• Statistics function displays average, maximum and minimum values, and the
number of recorded samples
Gas Detection / Environmental
P
1070
SPECIFICATIONS
• Measure IAQ and comfort conditions in schools, offices and other
indoor environments
• Investigate Sick Building Syndrome and building related illnesses
• Comply with regulations and guidelines
• Verify building HVAC system performance
• Examine building IAQ conditions to optimize worker productivity
CO2
CO
Temperature
Humidity
% Outside Air
Dew Point
Wet Bulb Temperature
Absolute Humidity
Data Logging/Downloading
Statistics
Review Data
Printer Output
NIST Calibration Certificate
8732
•
•
•
•
8760
•
•
•
•
•
•
•
•
•
•
•
•
Catalog No. Model Description
TS8732
TS8760
TS8762
8732
8760
Carbon Dioxide Meter with soft case
Datalogging Carbon Dioxide Meter with
Advanced Measurements
8762
Datalogging Carbon Dioxide & Carbon
Monoxide with Advanced Measurements
Please inquire for NIST Certification
Davis Inotek Instruments
8762
•
•
•
•
•
•
•
•
•
•
•
•
•
Price
$495.00
1,895.00
2,195.00
CO2
Dual-Wavelength design NDIR
Range
0 to 5000 ppm
Accuracy
3% of reading or 50 ppm, whichever is greater
Resolution
1 ppm
Response
60 seconds
Temperature
Sensor
Thermistor
Range
32-140°F (0 to 60°C)
Accuracy
1.0°F (0.1°C)
Resolution
0.1°F (0.1°C)
Response Time
30 seconds
Relative Humidity
Range
5% to 95% RH
Accuracy
2% RH
Resolution
0.1% RH
Response Time
20 seconds
CO
Range
0-500 ppm
Accuracy
3% of reading or 3 ppm, whichever is greater
Resolution
1 ppm
Repeatability
2% of reading
Response Time
<60 sec to 90% of final value
Dewpoint
Range
5 to 120°F
% Outside Air
0 to 100%
Resolution
0.1%
Operating Temperature
41 to 113°F (5 to 45°C)
Logging Capability (Models 8760 and 8762)
Range
Up to 14,000 samples and 1,000 test id’s
www.davis.com
Portable Indoor Air Quality Diagnostic Tool
SPECIFICATIONS
Operating Temperature Range
Power Input
Maximum Drift
Accuracy @ 77°F (25°C)
Temperature Sensor
Sensor Type
Measurement Range
Accuracy
Carbon Monoxide Sensor
Measurement Range
Accuracy
Datalogging
Recording Channels
Sampling Intervals
Storage Capacity
Davis Inotek Instruments
Non-Dispersive Infrared (NDIR)
0 - 5,000 PPM
± 5% of reading or ± 100 ppm
(whichever is greater)
± 100 ppm per year
± 5% RH
Semi-Conductor
0° - 40°C (32° - 113°F)
± 2°F (± 1°C)
0 - 300 ppm
± 3 ppm or ± 2% of reading
(whichever is greater)
it
• Measures carbon dioxide, temperature relative humidity and carbon
monoxide
• Real time readings and step-by-step instructions are provided on LCD
display
• Rugged carrying case provides storage for all accessories
• Theft- and tamper-resistant case has added security with padlock and
cable (included)
• Self-contained which allows for easy portability
• Locking capability provides added security during long term
monitoring sessions
• Easy-to-use Windows-based software graphs data 1058VGW
Catalog No. Model
GZ1381
Description
Price
1380B
CO2, CO, Temp, Relative Humidity,
2,495.00
Datalogger, 3 Hour Battery Back Up
and Windows® based software
GZ1385
—
Calibration Kit with CO and CO2
325.00
calibration gas
Datalogger includes hard carrying case, AC power cord, software, RS-232 cable
and padlock with security cable
Up to 4
Presets: 10 sec, 60 sec, 300 sec,
600 sec (programmable 1 to 9,999 sec)
Up to 14,000 data points
www.davis.com
P
Gas Detection / Environmental
Output
Dimensions
Weight
Carbon Dioxide Sensor
Sensor Type
Measurement Range
Accuracy
32° - 104°F (0° - 40°C)
90-264 VAC. 47-63 Hz AC power cord
with IEC connector included
RS-232 interface to PC
13.5" x 11.75" x 6.0"
14 lbs
NIST
1071
IAQ Indoor Air Quality/Toxic Monitor
NIST
it
The aq Series monitors are the result of over 26
years of experience in the design and development
of hand-held and portable data acquisition systems. The aq Series monitors deliver unmatched
convenience, versatility and value. They simultaneously display and record levels of CO2, temperature, %RH, and any one of ten gas hazards. They
also interface with third-party instruments sensing pollutants such as VOC’s respirable dusts, air
velocity, etc.
The aq Series monitors incorporate advanced
hardware and firmware design, making them the
easiest to use indoor air quality instruments
available today. The combination of straight-forward operator controls, large back-lit displays,
and intuitive display prompts give you a tool that
is ready for use with a moments notice.
SPECIFICATIONS
Gas Detection / Environmental
P
1072
Inputs
Carbon Dioxide
Range
5,000 ppm
20,000 ppm
Relative Humidity
Range
Temperature
Range
Gas
Detector
Data Storage
Statistics Saved
Printer Output
Summary Report
Time History Report
Internal Power
Operational life
AC power adapter
Size
Wand Size
Enclosure
0 to 5,000 to 0 to 20,000 ppm
± 3% of reading ± 50 ppm
± 3% of reading ± 300 ppm
0-100% non-condensing
0 to + 60°C (+ 32 to + 140°F) ± 0.5°C
CO, SO2, H2S, Cl2, NO2, NO, HCN, & NH3
57,344 total samples
“AA” Alkaline Batteries
>15 hours
120 VAC
3.6 x 7.1 x 1.3”
11.8” long
1” diameter
15 x 10.5 x 6”
Catalog No.
Model No
QS139670
AQ-5000UA
A Complete Solution for IAQ Monitoring
• Carbon Dioxide (Selectable: 0 to 5,000 or 0 to 20,000 ppm)
• Temperature (°C or °F)
• Relative Humidity
• Toxic Gas Levels - using any of the following interchangeable electrochemical sensors:
Carbon Monoxide (CO)
Sulfur Dioxide (SO2)
Chlorine (Cl2)
Nitric Oxide (NO)
Ammonia (NH3)
Oxygen (O2)
Hydrogen Sulfide (H2S)
Nitrogen Dioxide (NO2)
Hydrogen Cyanide (HCN)
• Third-Party Sensors/Analyzers:
VOC’s
Air Velocity
Respirable Dusts
Pressure
Other sensors/analyzers with a linear output
Convenient Power Options
The aq-5000 can operate on any of the following power sources:
“AA” alkaline batteries
Rechargeable nickel-metal hydride batteries
AC Power (AC power adapter comes with the instrument)
Software
• Easily Retrieve & Store Test Data
• Powerful Graphing Functions
• Quick Instrument Setup
• Secure Unattended Monitoring (5001)
Description
Handheld IAQ monitor with Windows® software, RS-232 cable, wrist strap, batteries, AC adapter,
and storage case
QS139671
AQ-5001UA
Handheld IAQ monitor with CO Sensor and Secured hard protective case (same as 5000)
• Additional toxic gas sensors are available, Please inquire
Please inquire for NIST Certification
Davis Inotek Instruments
Price
$2,999.00
3,699.00
www.davis.com
CO2/Temperature/Ventilation Monitor with Datalogger
The model 7001 is and easy-to-use CO2, temperature, and ventilation rate monitor designed for use in residential or commercial
applications. The 7001 has the ability to display CO2 in less than 60
seconds and can calculate and display the CFM/person ventilation
rate in any building. The 7001 is the perfect tool for determining if
air quality complaints are due to insufficient ventilation or identifying energy saving opportunities in over-ventilated spaces. The
7001D adds data logging and RH sensing to the 7001 which give
you the ability monitor CO2, temperature and relative humidity
over time and graph the data on your computer.
• Patented dual beam, Absorption Infrared™ CO2 gas sensor ensures long term stability
and durability
• Large, easy-to-read display shows CO2 in ppm (parts per million), temperature in °F or
°C, and the ventilation rate in cfm/person (cubic feet per minute per person)
• Altitude compensation and manual calibration using on-board push button controls
• Includes AC adapter, also operates for up to 70 hours on 4 AA batteries (not included)
• Available with data logging kit which runs for 12 months on lithium battery
• 4 channel logger measures temperature, RH, 2 external channels, 8-bit resolution
• Capacity: 7943 measurements total
• User-selectable sampling interval: 0.5 seconds to 9 hours, recording times up to 1 year
• Nonvolatile EEPROM memory retains data even if battery fails
• User-replaceable battery last 1 year
• Operating range: -4°F to + 158°F (-20°C to + 70°C), 0 to 95% RH, non-condensing, nonfogging
• Size/Weight: 2.4 x 1.9 x 0.8" (68 x 48 x 19mm)/approx. 1 oz. (29gms)
• CE certified
PC Graphing Software (includes cable)
• Launch and retrieve the datalogger and graph the recorded data
• System Requirements - 386 or better processor with at least 4M of RAM running
Windows 3.1x or Windows 95/98/NT/2000/ME, with at least one available serial port
• Export data files to Microsoft Excel, Lotus 1-2-3 or any
ASCII-compatible program
RH/Temperature Data logging Kit
• Comes with everything you need to record and graph relative humidity and temperature
, as well as a custom cable that connects the 7001 to the Hobo® Datalogger
• The Hobo® Datalogger has RH and temperature sensors build in and two external channels that accept V or mA signals
• The kit comes with BoxCar® 3.7 software for launching and retrieving the Datalogger and
graphing the data. Data can easily be exported to to other spread sheet programs like
MS Excel. The data logging kit is typically used with the 7001 but can also function as a
stand alone product
NIST
it
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
SPECIFICATIONS for CO2 Sensor
Temperature (internal sensor)
Range
Range for internal sensor
when used outside of case
Accuracy
CO2 data logging range
Resolution
Response time still in air
-4°F to + 158°F (-20°C to + 70°C)
-40°F to + 248°F (-40°C to + 120°C)
± 1.27°F (± 0.7°C) at + 70°F
0-2,500 PPM
0.7°F (0.4°C) at + 70°F
15min. typical with sensor inside case; 1min.
typical with sensor outside case
Relative Humidity (user-replaceable RH sensor)
Range
25% to 95%RH at + 80°F for intervals of ≥ 10 seconds,
non-condensing and non-fogging
Accuracy
± 5%
Response time
10 min. typical in air
Sensor Operating
+ 41°F to + 122°F (+ 5°C to + 50°C) non-condensing
Environment
and non-fogging
External input
Wide range of temperature sensors (TMCx-Hx series);
(accepts the following sensors) Split-core CTs for AC current (5 models); 4-20mA input
cable; 0-2.5VDC input cable - accuracy ± 10mV ± 1% of
reading, resolution 10mV (8-bit)
P
SPECIFICATIONS for Datalogger
Wiring Connection
Display Options
Display Resolution
Pressure Dependence
Catalog No.
Carbon Dioxide
0-10,000 ppm
0-4,000 ppm
± 50 ppm or 5% reading, whichever is greater
± 20 ppm
± 20 ppm
<60 seconds for 0.90% of step change
0-4 VDC, or 1mV/ppm (4,000 ppm max)
100 Ohms
<60 seconds at 22°C
12 months offset adjustment using single gas at
0-1,000 ppm CO2. Full factory calibration available
via RJ-45 to DB9 serial port cable
Temperature
32 to 122°F (0 to 50°C)
32 to 104°F (0 to 40°C)
± 2°F (± 1°C)
20-30 minutes (case must equilibrate with environment)
0-4 VDC linear, 32-104°F (0-40°C)
100 Ohms
12 months offset adjustment using temperature standard
at 50 to 86°F (10 to 30°C). Full factory calibration available
Via RJ-45 to DB9 serial port cable
°F, °C, or Off. Set with panel button
0.1°F (0.1°C)
0.13% of reading per mm Hg (Corrected via user input elevation)
Model
GZ1000
7001
GZ1001
7001D
GZ1002
2077
GZ2075
2075
Davis Inotek Instruments
Description
Price
CO2/Temperature/Ventilation Rate hand-held monitor with LCD display and 0-4VDC output,
$495.00
includes 6V power adapter, operates on 4 AA batteries (not included)
CO2/Temperature/Ventilation Rate hand-held monitor with LCD display combined with data
615.00
logging kit which includes; Datalogger, RH sensor, temperature sensor, PC graphing software and cables
Datalogging kit for the 7001 Includes datalogger with built-in RH and temperature sensors,
145.00
PC graphing software and cables Does not include 7001
Calibration kit for 7001, includes gas bottle, regulator, tubing and carrying case
249.00
Please inquire for NIST Certification
www.davis.com
Gas Detection / Environmental
Meter Specifications
Measurement Range (LCD Display)
Measurement Range (voltage output)
Accuracy
Repeatability
Maximum Allowable Drift in (1) Year
Response Time
Output Analog
Output Impedance
Warm-up Period (@Room Temp.)
Calibration Interval
1073
CO2 Transmitters
NIST
it
For Demand Controlled Ventilation
The use of the new CARBOCAP® sensor and the
GMW20 series has several advantages — high accuracy and excellent stability, negligible temperature dependence, ease of installation and reliable
operation as well as a five year recommended calibration interval to mention a few. The measurement accuracy of the sensor is not affected by dust,
water vapor or most chemicals. The use of the
GMW20 series transmitters results in considerable
Gas Detection / Environmental
P
1074
savings in installation, operation, maintenance
and recalibration costs and ensures the best possible control of air quality.
The GMW20 series transmitters can be used independently or they can be incorporated into building energy management systems. The GMW21D
features a display. In addition to the 0-20mA,
4-20mA and 0-10V outputs, there are also two
options: LonWorks® interface and a relay output.
Catalog No. Model
Description
Price
SPECIFICATIONS
VA100300
GMD20
$495.00
Carbon Dioxide
Measurement range
VA100302
GMW21D
CO2 Transmitter, duct version
with display and relay
CO2 Transmitter, wall mount
with display and relay
505.00
Accessories
VA100303
VA100304
VA100305
VA100306
VA100307
ML428271
GMI21
GML20
GMR20
18192GM
19222GM
Display module
LonWorks® interface module
Relay output option
Field calibration kit
Calibration software kit
(disk and serial adapter)
2400
Process Power Pack
24VDC-175mA
Please inquire for NIST Certification
Davis Inotek Instruments
80.00
155.00
55.00
175.00
155.00
130.90
Accuracy at + 20 °C
(incl. nonlinearity and
calibration uncertainty)
Principle
Long-term stability
Response time
(10...90% response)
GENERAL
Output signals
Optional outputs
Recommended external load
current output
Power supply
Power consumption
Warm-up time
Operating temperature range
Housing material
Dimensions (w x h x d)
GMW21 and GMW21D
GMW20
0 to 2000 ppm (nominal; can be
calibrated for other ranges)
<± 20 ppm + 1.5% of reading
NDIR light source
<± 100 ppm/5 years
<60 seconds
0...20 mA or 4...20 mA and 0...10 V
relay LonWorks® interface
max. 500 Ohm
nominal 24 VDC/VAC (18...30 VDC)
<2.5 W
<5 minutes
0...100 %RH, noncondensing
ABS plastic
80 x 108.5 x 35mm
42 x 42 x 64mm
probe: 15mm x 80 to 140
www.davis.com
CO2 Transmitter for Harsh Environments
NIST
it
For Harsh Environments
The GMT220 series transmitters are designed to
measure CO2 in harsh and humid environments. The
housing is dust and waterproof to NEMA 4/IP65 standards avd materials are corrosion resistant.
The transmitters are well suited for demanding
industrial CO2 applications, such as:
• Horticulture and fruit storage
• Greenhouses and mushroom farming
• Safety alarming and leakage monitoring
• Demand control ventilation in harsh environments
Optimal measurement range for each application
The user has a choice of measurement ranges up to
20% CO2: the GMT221 for higher concentrations of CO2.
The transmitter can be connected to various measurement systems. In addition to standard analog, voltage
and current outputs, there are also two configurable
alarm relay outputs. Activated relays are indicated by
LED lights on the cover. An optional LonWorks® digital
interface is also available.
Interchangeable probes
The GMT220 probes are truly interchangeable. They
can be removed and reattached or replaced at any time without the need for calibration and adjustment. The
probes can be attached directly to the transmitter body
or, when used with a cable, installed remotely into
hard-to-reach places or areas with dangerously high
levels of CO2.
Simple Installation
A separate mounting plate makes installing the
transmitter easy - simply attach the mounting plate to
the wall and lock the transmitter body in place.
The plastic plate protecting the electronics inside the
housing includes easy instruction for the electrical
connections.
Easy Field Maintenance
Since the probes of the GMT220 transmitters are
truly interchangeable, they facilitate easy field maintenance. The probes can either be replaced with newly
calibrated probes or with separate probes that are only
used as a reference for calibration checking. This minimizes downtime. The end user can do field maintenance
without any additional equipment or heavy and expensive calibration gas bottles. Any replaced probes can be
sent for recalibration.
Digital LCD Display — The four-digit LCD panel displays diagnostics and the ppm or % (CO2) symbols. Back
lighting makes the display easy to see in dark locations.
Catalog No.
Model
GMT221
0 - 2% CO2, 0 - 3% CO2, 0 - 5% CO2,
0 - 10% CO2, 0 - 20% CO2
GMT222 for low
0 - 2,000 ppm, 0 - 3,000 ppm,
concentrations
0 - 5,000 ppm, 0 - 7,000 ppm, 0 - 10,000 ppm
Accuracy at 77°F (+ 25°C) against certified factory references
GMT221
<± 0.02% CO2 + 2% of reading
GMT222
<± 20 ppm CO2 + 2% of reading
(incl. repeatability and calibration uncertainty)
Nonlinearity
<± 0.5% FS
Response time (63%)
GMT221
20 seconds
GMT222
30 seconds
Analog output signals
0 - 20 or 4 - 20 mA and 0 - 10 V
Resolution of analog outputs 0.03% FS
Recommended External load:
Current output
max. 400 Ohm
Voltage output
min. 1 kOhm
Two pre-or user-defined relay outputs
Power Supply
nominal 24 VAC/DC
max. 30VAC/60VDC, 0.5A
Power consumption
<4 W
Warm-up time
<15 minutes
Operating temperature range -4° - + 140°F (-20° - + 60°C)
Storage temperature range
-22 - + 158°F (-30 - + 70°C)
Operating humidity range
0 - 100% RH non-condensing
Housing Material
Transmitter body: ABS plastic
Probe: PC plastic
Housing classification
NEMA 4 (IP 65)
Weight
GMT221: max. 280 g
GMT222: max. 300 g
Probe cable length
2m (optional)
Dimensions
4.69" x 4.69" x 1.25"
Description
VA200420
GMT222
CO2 Transmitter (0-2,000 ppm) with LED lights and wall mount assembly
VA200421
GMT222
CO2 Transmitter (0-10,000 ppm) with LED lights and wall mount assembly
VA200422
GMT221
CO2 Transmitter (0-5% vol.) with LED lights and wall mount assembly
VA200423
GMT221
CO2 Transmitter (0-20% vol.) with LED lights and wall mount assembly
For LED digital display Add (B) to the catalog number and $100.00 to the price.
Please inquire for NIST Certification
Davis Inotek Instruments
Price
$760.00
760.00
760.00
760.00
www.davis.com
P
Gas Detection / Environmental
Options
SPECIFICATIONS
1075
CO2 Ventilation Recorder
NIST
it
Measuring carbon dioxide in ppm readings is a good
way to check for acceptable levels of ventilation within
a building. ASHRAE standard 62-1989 states that CO2
concentrations of no more than 1,000 ppm are recommended for an occupied space with a corresponding
ventilation rate of 15 cfm per person.
Since CO2 levels can fluctuate greatly during a
short period of time, it is important to record and store
data on CO2 levels. Accumulating data on CO2 levels
gives you the information you need to avoid indoor air
quality problems before they start.
• Record and monitor in ppm of CO2
• Locking control keypad
• High/low alarms
• Min/max feature allows display of minimum and maximum readings
• User calibratible for zero adjust
• Microprocessor control and electronic sensing
• Comes complete with, pen and a box of 60 charts (7 day, 0-2200 ppm)
SPECIFICATIONS
Ranges
User selectable
0 to 2200 ppm CO2
0 to 1100 ppm CO2
Accuracy
± 5% of full scale (0-2200)
Sensor
Non-dispersive infrared
Chart Size
8" diameter
Recording Time
User selectable1,7 and 31 day
Display Resolution 1 ppm
Power
120V AC power
Operating Range 50 to 90°F (10 to 32.2°C)
Warm up Time
15 minutes
Dimensions
10.5 x 13.2 x 2.8"
(26.7 x 33.5 x 7.1 cm)
Weight
Approximately 5 lbs. (2.3 kg)
Mounting
Free standing or wall mountable
Alarms
Audio/visual high and low alarms
Cat. No.
Model
Description
DK70831
DK708311
CO2X
R034
CO2 Ventilation Recorder
Benchtop feet for free standing
Price
P222
C404
C419
C402
C418
Box of 6 red pens
0-2200 ppm/ 1-day charts
0-2200 ppm/ 7-day charts
0-1100 ppm/ 1-day charts
0-1100ppm/ 7-day charts
$999.00
25.00
Accessories
DK116212
DK70832
DK70833
DK70834
DK70835
30.00
18.00/box
18.00/box
18.00/box
18.00/box
Please inquire for NIST Certification
CO2 Ventilation Controller
• Optional Display/Push Button
Interface
• 9 Application Specific Preset
Settings
• Software Adjustability
Gas Detection / Environmental
P
1076
NIST
it
• Elevation adjustment
• Reduced Installation Time and
Expense
• Ease of Operation
• Locking Screw
SPECIFICATIONS
Measurement Range
Sensitivity
Pressure Dependence
Response Time 0...90% FS
Operating Conditions
Power
Analog CO2 Output
Relay
Digital Output
Davis Inotek Instruments
0 - 2000 ppm factory set
± 1 ppm
0.18% of reading per mm Hg
<30 seconds
0° ... 50°C (32° - 122°F)
0 ... 95% RH, non condensing
15-30 VAC RMS, 50/60 Hz
Normally open and/or closed, gold bifurcated,
2A rating, factory set at 1000 ppm
RS-232 interface
Catalog No.
Model
Description
GZ80021
GZ80024
GZ80023
GZ2072
GZ2075
NISTGA29
NISTGAQ29
Venostat-8002
Venostat-1508
Venostat-8008
2072
2075
—
—
CO2 Wall Mount
Aspiration Box
CO2 Duct Mount-Pitot Tube
User Interface Program with cable
Calibration Kit for 8002
NIST Traceable Certificate
2 Year NIST Traceable Certificate
Price
$294.00
75.00
329.00
60.00
249.00
125.00
187.00
www.davis.com
Electronic Flue Gas Leak Detector
NIST
it
The 317-1 quickly and efficiently detects escaping flue gases at the source.
Flue gases can invade living spaces from many
potential sources. Whether the spillage is caused
by equipment failure or poor draft conditions,
identify the source quickly and easily with the
317. Flue gas spillage is an indicator of CO in
the living space. Check for spillage before the
situation becomes dangerous.
• Detects spillage quickly and easily
• Checks heating rooms for leaks
• Flexible probe allows you to check difficult locations
SPECIFICATIONS
Dimensions (instrument)
Reaction Time
Storage/transport temperature
Operating Temp
Power Supply
Alarm Display
Warranty
5" x 1.8" x 7"
<2 s
-4 to + 122°F
39 to 115°F
3 x 1.5 V micro AAA
Optical and Audible signals
1 year
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
P
Model
Description
TT3170
3170
Leak detector with flexible probe for hard to reach locations; with instruction manual and battery
Davis Inotek Instruments
Price
$149.00
www.davis.com
Gas Detection / Environmental
Catalog No.
1077
Carbon Monoxide Single Gas Analyzer
Ask about
NIST
it
The SGA91AKIT includes all the equipment
you need to make quick and easy carbon monoxide
(CO) test in combustion operations or occupied
spaces. It has an ergonomic, handheld analyzer
with a strong and efficient internal pump that
continuously pulls gas samples from the flue or
ambient air. A quick connect hose and flue probe
(10' overall length) allows you to take gas samples
from the exhaust stack of a combustion operation
or pinpoint the source of a CO leak. With the
SGA91AKIT you customers are assured you have
done a thorough CO inspection.
2 Year
NIST %
Save 50
on 2nd year
recalibration
• Measures from 0 to 1999 ppm CO
• Internal pump pulls gas samples quickly and steadily
• Unique pump standby switch extends battery life and speeds testing
• Flue probe and flexible hose connect securely
• Switchable backlight
• Thumb wheel for easy zero adjust
• Sensor will last for 2 years
• Two year limited warranty
SPECIFICATIONS
Gas Detection / Environmental
P
1078
Concentration of
Inhalation Times and Toxic Symptoms
CO in Air
9 PPM
The maximum allowable concentration for short term exposure in a living area according to ASHRAE
35 PPM
The maximum allowable concentration for continuous exposure in any eight hour period, according to federal law
200 PPM*
Maximum concentration allowable at any time according to OSHA. Slight headaches, fatigue, dizziness, nausea after 2 to 3 hours
400 PPM
Frontal headaches within 1 to 2 hours, life threatening after 3 hours. Maximum allowable limit in flue gas according to EPA and AGA
800 PPM
Dizziness, nausea and convulsions within 45 minutes. Unconsciousness within 2 hours. Death within 2 to 3 hours
1,600 PPM
Headache, dizziness and nausea within 20 minutes. Death within 1 hour
3,200 PPM
Headache, dizziness and nausea within 5 to 10 minutes. Death within 30 minutes
6,400 PPM
Headache, dizziness and nausea within 1 to 3 minutes. Death within 10 to 15 minutes
12,800 PPM
Death within 1 to 3 minutes
*Exposure to this concentration and higher, the effects can vary depending on size, age, sex and health. Davis Inotek is not liable for the complete accuracy of
this information.
Range
0-1999 ppm CO
Accuracy
± 5% of reading
Battery Type
Four (4) AA batteries
Battery Life
6 hours continuous use without backlight
Sensor Type
Electrochemical cell
Sensor Life
2 years
Response Time
(90%) 30 seconds approx.
Gas Flow Rate
Approx. 40 cu inches/min. @ S.T.P.
Gas Inlet
Probe connector on case top
Display
3-1/2 digit LCD
Zero Control
Positioned on top of instrument
Low Battery
Automatically indicated on LCD
Operating Temp
32 to 105°F
Operating RH
10 to 90% noncondensing
*SGA91AKIT includes: CO analyzer, flexible tube probe with filter, flue probe, four (4) AA batteries, instruction manual and carrying case
Catalog No.
Model
Description
UN881200
KM42
SGA91AKIT
SF9
Carbon Monoxide Single Gas Analyzer
SO Filter (optional)
*Please inquire for NIST Certification
Davis Inotek Instruments
2
Price
$495.00
16.00
www.davis.com
Combustion Efficiency Analyzer
The C100A enables HVAC professionals to accurately test and service all residential combustion
appliances. The extra large backlit LCD displays
three parameters at one time. The C100A can store,
retrieve, view and print up to 99 test results.
The optional printer allows you to print a copy of all
your readings right on the spot to document your test
results.
For technicians who are requred to diagnose and
repair heating equipment, the unit can be fitted with
a CO and/or differential pressure sensor at the time
of purchase, or return the unit to Davis Inotek
Instruments to have them fitted later. As the needs
of the owner change, the C100A can fill those needs.
C100A: Base unit which includes O2 and temp.;
C100A/CO: Base unit of O2 and temp, with Carbon
Monoxide added; C100A/COP: Base unit of O2 and
temp, with Carbon Monoxide and Pressure added
• Large backlit, triple display
• Datalog with 99 memory storage
• Protective boot with integral magnet
• Protective hard carrying case included
• Optional infrared printer
• Optional AC power supply
• Three year limited warranty, two years on sensor
SPECIFICATIONS
Parameter
Temperature
Flue Temperature
Inlet Temperature
Temp (Net)*2
Gas Measurement
Oxygen
Carbon Monoxide*3
Carbon Dioxide*2
Efficiency*2 0.1%
Excess Air*2
Poison Index*2*3
CO/CO2 ratio*2*3
Pressure (differential)*3
Resolution
Accuracy
Range
1°F/°C
1°F/°C
1°F/°C
± 5°F (2°C) ± 0.3% reading
± 1°F/°C ± 0.3% reading
± 5°F (2°C) ± 0.3% reading
32-1112°F (0-600°C)
32-212°F (0-100°C)
32-1112°F (0-600°C)
0.1%
1ppm
0.1%
± 0.2%*1
± 10ppm<100ppm*1 ± 5% of reading
± 0.3% reading
± 1.0 reading
± 0.2%
± 5% of reading
± 5% reading
± 1% of full scale
0-21%
0-2000ppm 4000ppm max for 15 mins.
0-30%
0-99.9%
0-250%
0-99.9%
0-.999%
0-19.999 in WG
20-40 in WG
0-100 mbar
0.1%
0.1%
0.001
0.004 in WG
0.01 in WG
1.0 mbar
Natural Gas, Light Oil, Propane, Butane, LPG
2.2 lb (1kg)
8" (200mm) x 2" (45mm) x 3.5" (90mm)
L 12" (300mm) x Dia 0.25" (6mm) with 8" (200mm) long stainless steel shaft, type K thermocouple and
9ft (3m) long neoprene hose
Ambient Operating Range
32-104°F (0°C to 40°C)
10% to 90% RH non-condensing
Battery Life
Standard "AA" (x4) >8 hours continuous use
AC Adapter (optional)
Input 110VAC/220VAC nominal; Output 10VDC no load
*1 Using dry gases at STP; *2 Calculated; *3 Optional
Catalog No.
Model
Description
UN633112
UN633119
UN633120
Accessories
UN633113
UN633121
UN633122
C100A
C100A/CO
C100A/COP
Efficiency Analyzer for O2 and Temperature
Efficiency Analyzer for O2, Temperature and Carbon Monoxide
Efficiency Analyzer for O2, Temperature, Carbon Monoxide & Pressure
AACA3
KMIRP
16646
AC Adapter
Infrared printer
Paper roll (1 roll)
Please inquire for NIST Certification
Davis Inotek Instruments
Price
$599.00
825.00
950.00
22.00
275.00
13.00
www.davis.com
Gas Detection / Environmental
Pre-programmed Fuels
Dimensions
Weight
Handset
Probe
P
1079
Fyrite® Pro Combustion Gas Analyzers
NIST
it
A new family of residential
combustion gas analyzers
from Bacharach.
Measure and calculate all of
the above combustion parameters or mix and match for your
specific application needs.
It’s packed with features that
make it easy to use and easy to
carry.
The Fyrite Pro comes complete with a carrying case, probe
and hose assembly and batteries. An optional IR printer provides documentation of test results. And, the unique hand
strap and optional magnetic
boot simplifies the process of obtaining results, allowing you to
focus your attention on conducting the test — rather than the
test equipment.
Gas Detection / Environmental
P
1080
• Six new models
• Completely upgradeable from CO-Tester to Combustion Analyzer
• Measure CO, draft O2, air & stack temperature, differential pressure
• Calculate CO2, combustion efficiency, excess air, CO-air free
• Affordable. Each of the six Fyrite Pro base models are economically
priced, and offer feature upgrades for less than the cost of a brand
new instrument
• Simple to use. Turn the unit on, select the fuel, and insert the probe.
It’s that easy
• Quick payback. The Fyrite Pro reduces service call time by providing
accurate, electronic test results instantly
• Record test results. Test data can be documented using the “hold” key
which freezes readings and transfers them to the infrared printer
(no wires)
• Accurate operation. Tactile feedback from the instrument’s keypad
assures that the appropriate key has been activated
• Two year warranty on analyzer and sensors insures worry-free
operation
• Ergonomically designed. It’s lightweight and fits in the palm of your
hand. And, a unique hand-strap makes the instrument easy to handle
• Long battery life. Four alkaline batteries typically offer 24 hours of continuous operation with an automatic “power off” feature that saves
energy
• High quality. The Fyrite Pro is internationally recognized and CE
Certified
Catalog No.
BA248045
BA248049
BA248052
BA240886
Model
24-8200
24*8202
24-8105
24-1227
Davis Inotek Instruments
SPECIFICATIONS
Measurement Ranges
Combustion Air Temperature
Flue Gas Temperature
Oxygen
Carbon Monoxide
Draft/Differential Pressure
Calculated Ranges
Combustion Efficiency
Carbon Dioxide
Carbon Monoxide (air free)
Excess Air
Selectable Fuels
Power
Battery Life
Size
Weight
Warranty
0 to 212°F (100°C)
0 to 999°F (-18 to 537°C)
0.1 to 20.9% O2
0 to 2,000 PPM CO
-27.0 to + 27.0 in. WC
0.1 to 99.9%
0.1 to 20.0% (fuel dependent)
0 to 9,999 PPM
0 to 250%
Natural Gas (F1) Oil #2 (F2)
Propane (F3) Oil #6 (F4)
Four disposable AA alkaline batteries
Over 24 hours of continuous operation
7.5” H x 3” W x 2.2” D
16 oz. with batteries
2 years, including sensors
Description
Fyrite Pro Gas Analyzer with CO (only)
Fyrite Pro Gas Analyzer with CO, Draft, Differential Pressure
Fyrite Pro Gas Analyzer with O2, CO, Temp, Draft, Differential Pressure, Efficiency and CO2
IR printer
Please inquire for NIST Certification
Price
$425.00
550.00
999.00
280.00
www.davis.com
Bacharach Portable Toxic and Oxygen Gas Detectors
Meet our family of handheld digital analyzers for
measuring toxic gases or oxygen. Now you can quickly measure and display levels of carbon monoxide
(CO), oxides of nitrogen (NOx), sulphur dioxide
(SO2), or oxygen (O2) accurately, efficiently and economically. Just insert the probe into the stack or air
being sampled and switch on, the analyzer will continuously measure and display readings of the specific gas. Light and rugged, each single gas analyzer
will operate on four replaceable, C-size batteries for
approximately 14 continuous hours of operation. All
this makes it easier to check the level of a specific gas
(CO, NOx, SO2, O2) in residential furnaces, commercial or industrial boilers, and room air.
NIST
it
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
Included with each unit:
Installed and calibrated sensor, probe and hose assembly, carrying strap, operating and service manuals, adjustment screwdriver and carrying case.
• Portable, hand-held instrument
• Constructed of a rugged, lightweight plastic
• Continuous sampling with accurate readings of the specific gas
• Durable, impact resistant case (even in low temperatures), that
withstands fuels and other corrosive liquids
• Highly visible digital display with backlighting
• Detachable, stainless steel probe with handle with a one meter
flexible hose
• Fast, inexpensive battery replacement with “Low Bat” indication
• Multi-purpose strap designed for easy carrying and secure
mounting to pipes or duct work
• In-line water trap for combustion applications
Model
Description
BA44689
BA44690
BA44691
BA44692
BA446935
BA446936
BA446937
BA446939
BA446940
BA4469501
BA446938
MONOXOR ll
NONOXOR ll
DIOXOR ll
OXOR ll
24-0519
19-8001
24-7070
24-7059
24-0492
51-1994
19-8002
CO Detector
NOx Detector
SO2 Detector
O2 Detector
Replacement CO Sensor
Replacement NOx Sensor
Replacement O2 Sensor
CO Calibration kit without gas
CO Gas cylinder 500ppm
CO Gas cylinder 100ppm
Replacement SO2 Sensor
Price
$469.00
995.00
995.00
535.00
160.00
295.00
130.00
235.00
179.00
168.00
295.00
P
Please inquire for NIST Certification
SPECIFICATIONS
Range
Factory Calibrated
Instrument Accuracy
Readout
Battery Supply
Battery Life
Max. Probe Exposure
Pump Draw
Sensor Life
Dimensions
Weight
Monoxor ll (CO)
Nonoxor (NOx)
Dioxor ll (SO2)
0-2000ppm
0-2000ppm
0-2000ppm
500ppm CO gas
100ppm NO
100ppm SO2
± 5% of reading
± 5% of reading
± 5% of reading
Four-digit LCD display featuring 13mm (1⁄2") high digits, low battery and overrange indicator
Four replaceable, C-size batteries (not included)
Approximately 14 continuous hours
538°C (1000F°)
Up to 25mm (1") W.G.
Typically over two (2) years
(8.6" x 3.5" x 2.9")
Approximately 0.6kg (21oz) with batteries
Davis Inotek Instruments
Oxor ll (O2)
0-25%
10% O2
± 0.8% of oxygen
www.davis.com
Gas Detection / Environmental
Catalog No.
1081
Combustion Analyzers
NIST
it
• Quickly and easily measure O2, CO2, efficiency, excess air, draft
and CO (325-1 only)
• Hands free operation with convenient magnetic backplate
• Immediate printout of readings on-site, with date and time using a
wireless infrared printer
Model 300M additional features
• Menu driven large display
• Internal memory for up to 120 complete measurements
• Data transfer to PC via RS-232
• Optional NOx measurement
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
325-1
SPECIFICATIONS
300M
Gas Detection / Environmental
P
1082
Catalog No.
Model
TT630330
TT630320
325-2
325-1
Description
Price
Combustion Analyzer Kit
$795.00
Combustion Analyzer Kit
1,050.00
(with CO measurement)
Kits include meter, 12" probe, magnetic backed soft case and heavy duty aluminum
carrying case and spare filters
TT3001
300M
300M Combustion Analyzer Kit
1,795.00
Includes meter, 12" flue gas probe, power supply, recharger, heavy duty aluminum
service case and soft case with magnetic backplate
Accessories
TT40099
0554.0053 Power supply
70.00
TT9798
0600.9798 Ambient temperature probe
98.00
TT40345
0554.0545 Wireless Infrared printer for printing of
299.00
readings with time and date
TT40569
0554.0569 Spare paper for printer
23.00
TT148504
0554.3371 10 Pack of probe filters
25.00
TT90069
0309.0069 Replacement O2 cell
119.00
TT90168
0309.0168 Replacement CO cell
200.00
Model 300 Accessories
TT301
0440.3922 NO measuring cell
725.00
TT304
0554.0310 Comfort Software
145.00
TT305
0409.0154 RS-232 Interface
49.00
Please inquire for NIST Certification
Davis Inotek Instruments
Temperature Measurement
Measurement Range
-40 to + 1000°C
Accuracy
± 1.0°F
Resolution
0.1°F
Sensor
Thermocouple type K (NiCr-Ni)
Draft/Pressure Measurement
Measurement Range
± 16 inches H2O
Resolution
± 0.1 inches H2O to 0.01
Gross/Net Efficiency
Measurement Range
0 to 100%
Resolution
0.1%
O2 Measurement
Measurement Range
0 to 21 vol. %
Accuracy
± 0.2 vol. % absolute
Resolution
0.1 vol. %
Response Time T90
Approx. <40 s
CO2 Measurement
Display Range
0 to CO2 max
Accuracy
± 0.2 vol. %
Resolution
0.1 vol. %
Measurement
dig. calculation from O2
Response Time T90
Approx. 40 s
CO Measurement (Testo 325-1 and 300M)
Measurement Range
0 to 2000 ppm
Accuracy
± 20 ppm (to 400 ppm)
(H2, level <10%)
± 5% of m.v.
Resolution
1 ppm
Response Time T90
Max. 60, typically 40 s
Weight
Approx. 18 oz
Dimensions
8.5" x 3" x 2"
Power Supply
110 VAC, Alkaline batteries or rechargeables
www.davis.com
Unigas 3000 & UniGas 4000 Combustion Analyzers
NIST
it
Combustion Efficiency Control and Emissions Monitoring with up to 4 Sensors
The UniGas 3000 and 4000 are compact, palmheld flue gas analyzers that permit combustion
analysis, boiler tuning, emissions monitoring and
auxiliary test and inspections. Two electrochemical sensors read the Oxygen (O2) and Carbon
Monoxide (CO) concentrations. These values, combined with the flue gas and combustion air temperatures, are used to calculate the efficiency, excess air and CO2. Natural gas, LPG, diesel and
fuel oil are the four most common fuels to be measured, yet six more fuels can be programmed to be
measured by the user. Additional sensors are used
to measure the pollutant NO, NO2 or SO2 as may
be required.
Additional external probes allow the operator to
make ambient measurements of room temperature and relative humidity, ambient CO safety
checks and CH4 analysis for leak detection. Other
modes include draft measurement, report printing, datalogging and PC interface. One rechargeable battery pack powers both the instrument and
the printer.
ORDERING INFORMATION
7 8 2 A
1
B
C C
D
E 2 E E E 7
To create a part number fill in the boxes above with the appropriate number and/or letter
from the corresponding box below.
Box A: Model Type
3 = UniGas 3000 (up to 3 sensors)
4 = UniGas 4000 (up to 4 sensors)
$1,599.00
1,726.00
• Flue Gas Analysis using 2 or 3 Sensors with UniGas 3000, or using up
to 4 Sensors with UniGas 4000: O2, CO, NO, NO2, SO2
• Auxiliary & Calculated Measurements: Ambient and Flue Gas
Temperature, Pressure, Draft and ∆P, Efficiency, Excess Air, CO2, NOX
• Optional Measurements: Ambient CO, Gas Leak Detection, Ambient
Temperature and Relative Humidity
• Data Storage: 250 Samples with Customer and Boiler Tags
• Software Configuration and Data Storage
SPECIFICATIONS
Box B: Sensor 2
2 = CO (0-8,000 ppm) H2 compensated
2X = CO (0-20,000 ppm)
2Y = CO (0-10%)
N/C
N/C
N/C
Box D: Gas Sampling Probe
1D = 7” (180mm) Pistol Grip & Draft 1472°F (800°C) max
3 = 12” (300mm) Standard & Draft 1472°F (800°C) max
4 = 12” (300mm) Pistol Grip 1832°F (1000°C) max
5 = 30” (750mm) Pistol Grip 1832°F (1000°C) max
225.00
225.00
469.00
594.00
Box E: Options (enter all that apply)
0 = None
N/C
1 = Internal impact printer
250.00
3 = Gas network leak test mode (pressure decay)
125.00
4 = Graphic Display Capability (standard on 4000 for no charge) 131.00
6 = Electrovalve CO Exclusion (standard on 4000 for no charge) 113.00
$75.00
250.00
63.00
75.00
463.00
313.00
2.00
15.00
Combustible Types
Power Supply
Charging Time
Battery Life
Printer (optional)
Printer Power Supply
Print Capability
Internal Data Memory
Service/User Info
Display
Serial Interface
Optional Probes
Working Temperature
Storage Temperature
Dimensions
Weight
Warranty
UniGas 3000: 2 or 3 cell gas analyzer
UniGas 4000: 2, 3 or 4 cell gas analyzer
Automatic calibration procedure at instrument
switch-on
Sensors efficiency test with display diagnostic indication
Up to 10 totally programmable
High capacity Ni-MH rechargeable battery pack
with external battery charger
8h at 90% with instrument Off
6h continuous operation (without printer/backlight)
Impact type 24 columns. Includes paper roll 2.25”x
60’ (58mm x 18m)
From the analyzer battery pack
Up to 40 reports with battery full
Up to 250 complete analysis; data structured by
Customer and Boiler Tags
3 programmable lines for each customer using a
PC and DBGas Software (BB260166)
1.6” x 2.2” (40 x 56 mm) graphic LCD display,
automatic backlight device. Bar graph and trend
capability optional
Bi-directional infrared serial interface.
External IR/RS232 converter available for
PC communication (BB530100)
Ambient CO, gas leak, natural gas sniffer and
T+RH%
23 to 113°F (-5 to 45°C)
-4 to 140°F (-20 to 60°C) 3 months max at temps
exceeding operational limits
4.5 x 3.5 x 13 in. (115 x 90 x 330 mm)
2.43 lb (1.1 kg) with battery and printer
2 year electronics, 1 year sensors
www.davis.com
P
Gas Detection / Environmental
N/C
531.00
531.00
531.00
Davis Inotek Instruments
Calibration
Self-Diagnosis
Box C: Sensors 3 and 4 (enter all that apply)
0 = None
4 = NO & NOX (0-4,000 ppm)
5 = NO2 (0-1,000 ppm)
6 = SO2 (0-4,000 ppm)
Accessories
EU880032 BB880032 Shoulder Strap and Magnetic Plate
EU830003 BB830003 Temperature and Relative Humidity Probe
EU260166 BB260166 Unigas Configuration and Data Software
EU530100 E4530100 BB530100 IR/RS232 Cable and Module
EU830009 BB830009 Ambient CO Probe
EU830010 BB830010 Natural Gas Sniffer
EU34005 EE340005 Flue Gas Analyzer Universal Paper Roll 60’
EU490002 EE490002 Flue Gas Analyzer Universal Printer Ribbon
Please Inquire for NIST Certification
Type
1083
CA-Calc™ Combustion Analyzers
NIST
it
Combustion Analysis Made Simple
• Real-time measurements
• Calculates efficiency, excess air, % CO2 and emission rates
• Provides NOx values (models with NO sensor only)
• Easy-to-understand menus and icon-driven commands
• Emission gas concentrations use the adjustable O2
reference
• Factory-calibrated, field-installable replacement sensors
• Stores up to 350 samples for 35 sites and 75 systems
• Battery system provides 24 hours of continuous operation
• Eight factory-set fuels and five user-defined fuels
Applications
• Tune burners in industrial boilers, heat exchangers,
residential furnaces, process heaters and other combustion
equipment
• Supplement regular boiler system maintenance checks to
minimize maintenance and repair costs
• Spot check levels of NO, NO2 and SO2
• Perform emissions control equipment maintenance checks
• Measure flue gas and combustion inlet air temperatures
• Check carbon monoxide safety in boiler rooms
TSI’s CA-Calc portable electronic combustion
analyzer is a rugged, fast-response, easy-to-use
instrument ideal for tuning burners for maximum efficiency and safety—from large industrial
systems to small residential appliances. The
basic unit measures O2, CO, draft, and ambient
and stack temperatures. Optional sensors can be
added for measuring NO, NO2, SO2 and high CO
concentrations.
SPECIFICATIONS
Gas Detection / Environmental
P
1084
Series CA-6200
Oxygen (O2)*
Carbon Monoxide (CO)
H2 Compensated*
Carbon Monoxide (CO)
High Concentration*
Nitric Oxide (NO)*
Sulfur Dioxide (SO2)*
Nitrogen Dioxide (NO2)*
Carbon Dioxide (CO2)
Excess Air (%EA)
Efficiency (Enet and Egr)
Stack Loss
Supply Temperature
Flue Gas Temperature
Draft
Operating Conditions
Temperature Range
Operating
Storage
Max. Probe Temp.
Instrument Humidity Range
Continuous
*Electrochemical Sensor
Davis Inotek Instruments
0 to 25%
0 to 5,000 ppm
0 to 20,000 ppm
0 to 4,000 ppm
0 to 4,000 ppm
0 to 500 ppm
Calculated from O2 and fuel type
0 to 1,000%
0 to 125%
0 to 100%
-22 to 392°F (-30 to 200°C)
32 to 1,800°F (0 to 1,000°C)
± 30 in. H2O (± 80mBar)
32 to 122°F (0 to 45°C)
-20 to 140°F (-30 to 60°C)
1,800°F (1,000°C)
15 to 90%, 0 to 99% Intermittent
Catalog No. Model
Description
TS145304
TS145305
TS145306
CA-6210
CA-6211
CA-6212
TS145307
CA-6213
TS145308
CA-6214
TS145309
CA-6215
CA-CALC with O2 and CO Sensors $2,195.00
CA-CALC with O2 and NO Sensors
2,795.00
CA-CALC with O2 and High
2,795.00
Concentration CO Sensors
CA-CALC with O2, CO, NO
3,545.00
and SO2 Sensors (includes Teflon-lined
sampling probe)
CA-CALC with O2, NO and
3,395.00
High Concentration CO Sensors
CA-CALC with O2, CO, NO and NO2
3,545.00
Sensors (includes Teflon-lined
sampling probe)
Price
Accessories
TS145310
TS145311
TS145312
TS145313
TS145314
TS145315
801940
801951
12" SS probe with 9' Sampling tube
12" SS emission probe with 9'
Sampling tube
801954
18" SS probe with 9' Sampling tube
801958
18" SS emission probe with 9' Sampling
tube (teflon-lined) and SS fittings
801956
24" SS probe with 9' Sampling tube
801960
24" SS emission probe with 9' Sampling
tube (teflon-lined) and SS fittings
Please Inquire for NIST Certification.
265.00
425.00
275.00
465.00
285.00
445.00
www.davis.com
Bacharach Combustion Efficiency & Environmental Analyzer
NIST
it
• Easy to operate — It’s menu-driven, with front panel controls and easy access to
any major display screen
• Large, easy-to-read data display can be viewed from any angle
• Measured and calculated data are presented on one screen, and updated on a
continuous basis
• Setups can be customized so data can be provided in a format convenient for you
• Perform tests for any of 10 selectable fuels
• Calibration adjustments can be made easily in the field
• Sensors and sensor filters can be easily accessed and maintained
• Save up to 1,000 test records in memory which are time and date coded
• Data can be logged by interval and duration
• Print individual test records to an internal printer in real time or from memory
• Download test data to a PC for use in other software programs
• 1 year Warranty
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
SPECIFICATIONS
Measurements & Ranges
Stack Temperature
Primary Temperature
Draft/Diff. Pressure
Calculations & Ranges
Selectable Fuels
Power
Pumps
Probe
Size
Catalog No.
Model
BA247221
BA243026
BA243027
BA243028
BA243029
BA243030
24-7221
24-3026
24-3027
24-3028
24-3029
24-3030
Davis Inotek Instruments
Description
BASE UNIT (O2, CO, TS, TA, ÔP)
CO (high) Sensor
NO Sensor
Combustible Sensor
NO2 Sensor
SO2 Sensor (Requires NO2 Sensor)
Please inquire for NIST Certification
Price
5,825.00
995.00
595.00
695.00
595.00
895.00
www.davis.com
P
Gas Detection / Environmental
Oxygen
0.1 to 20.9%
Carbon Monoxide (hydrogen compensated)
0 to 4000 ppm
Carbon Monoxide (high)*
4000 to 80000 ppm
Nitric Oxide*
0 to 3500 ppm
Nitrogen Dioxide*
0 to 500 ppm
Sulfur Dioxide*
0 to 4000 ppm
Combustibles
0 to 5.00% (application dependent)
*Optional
0 to 2400 degrees F
0 to 999 degrees F
-28 to 28 inches of H2O
Combustion Efficiency
0.1 to 100.0%
Excess Air
1.0 to 250%
Carbon Dioxide (dry basis)
0 to fuel dependent maximum
0 to 4000 ppm
NOx (Nox = NO + NO2)
0 to 17000 ppm
NOx referenced to % O2
0 to 99999 ppm
CO referenced to % O2
NO referenced to % O2
0 to 14900 ppm
0 to 2100 ppm
NO2 referenced to % O2
SOx referenced to % O2
0 to 17000 ppm
Natural Gas, Oil #2, Oil #4, Oil #5, Oil #6, Propane, Coal Wood, Kerosene, Bagasse
Universal AC adapter and an internal battery pack. Adapter will accept input voltages from 100 to 240V. Fully charged
battery pack provides a minimum of 8 hours operation
Two pumps are included. The first pump supplies gas sample to the sensors. The second pump supplies fresh air to
purge the low range CO sensor when CO levels exceed 4000 ppm
Probe includes a standard probe and hose assembly equipped with a water trap, particulate filter, probe stop, 15 feet
of hose, and 11-inch probe tube.
13.5" H x 18.5" W x 9" D
Weight: 25 lbs. (11.34 kg.)
1085
Bacharach Portable Combustion Analyzer
Portable Combustion Analyzer (PCA)
An affordable, easy to use instrument for CO
safety and efficiency testing of combustion applications.
An affordable, easy to use and reliable instrument for CO safety and efficiency testing of combustion applications. The new PCA is the perfect
tool for every service technician in determining
safety and efficiency of all combustion appliances.
It has a large LCD display with backlight that
shows eight different combustion values simultaneously. The PCA will directly measure and display flue gas O2, temperature, CO (option) while
computing and displaying combustion efficiency,
excess air, CO2 and CO air free. Up to 10 sets of
tests can be stored and downloaded into an infrared printer for a permanent record. The PCA
includes a powerful industrial pump, probe and
hose assembly with a filter and water trap, four
(4) AA batteries, user guide and an instruction
manual which are all packaged into a custom
carrying case... just turn it on and go!
Applications
The new PCA is the perfect tool for service technicians who need to determine safety and/or efficiency in combustion applications. Residential
furnaces, hot water heaters, boilers and ovens are
just a few typical areas of use. The device can also
be used in gas utility and weatherization applications where indoor air safety is a concern.
By utilizing the optional printer, you can provide hard-copy evidence of the need for repairs or
replacement of your customer’s appliances. They
will appreciate a record of your tests.
Only the PCA measures CO air free...
Here’s what that means to you
Gas Detection / Environmental
P
1086
The PCA directly measures and displays
• Ambient Temperature
• Oxygen (O2)
• Combustion Efficiency
• Carbon Monoxide (CO)
• Excess Air
• Carbon Dioxide (CO2)
• Stack Temperature
• CO air free
• Draft
• Directly measures and displays flue gas O2, temperatures, Draft and
CO
• Calculates and displays combustion efficiency, excess air, CO2 and CO
air free
• Large display shows eight (8) different values simultaneously with
backlight
• Long life, disposable batteries with an optional 120 VAC power supply
• Two year warranty on instruments and sensors
• Draft and CO measurements (optional)
• Eight (8) North American fuels
• Optional probes for a variety of applications
• Dated results can be recalled to the display screen at any time
• Separate temperature sensor for combustion air
The CO air free unit of measurement is computed by the PCA from the CO and O2 measurements.
This calculated value is a concept for determining
the amount of CO present in a sample by compensating for the amount of excess air provided by the
burner. In other words, the CO air free measurement eliminates the excess air dilution caused by
primary and secondary air. American National
Standards Institute (ANSI Z21) specifies the use
of PPM CO air free as a unit of measure when
testing certain appliances. The following are the
ANSI standards 200 PPM CO air free on an unvented space heater; 400 PPM CO air free on furnace flue gas; and 800 PPM CO air free on an
unvented gas oven.
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
TO ORDER, SEE NEXT PAGE ➡
Davis Inotek Instruments
www.davis.com
NIST
it
Our most important goal is to
meet the needs of you, our customer.
We listened to you and developed
the PCA around your needs and requirements. We also contacted several HVAC associations including
ACCA, RSES, NAOHSM and others
for their input. As a result, product
features were incorporated into the
design of the PCA to meet or exceed
your expectations. Some of the features include a simple keypad for
user-friendly operation, an easy to
read display showing eight different
values simultaneously, an optional
infrared printer to document test
results and a rugged, lightweight
case for added versatility during
operation and transport.
SPECIFICATIONS
Catalog No. Description
Price
Measurement Ranges
Oxygen
Primary /Air Temperature
Stack Gas Temperature
Carbon Monoxide (optional)
Draft (optional)
BA248040
$915.00
0 to 20.9% auto calibration
23 °F to 392 °F
23 °F to 2000°F
0 to 2000 PPM (hydrogen compensated)
-8.0 to + 8.0 in WC
(also user selectable in Pascal or Millibar)
Calculation Ranges
Combustion Efficiency
Excess Air
Carbon Dioxide
Carbon Monoxide (Air Free)
Davis Inotek Instruments
BA248043
1,450.00
1,599.00
Optional Spare Parts
BA240788
BA240789
BA240797
Replacement oxygen sensor
Replacement CO sensor
Replacement draft sensor
135.00
285.00
80.00
Optional Accessories
BA240886
BA240885
BA240887
BA243003
BA243004
IR printer
External power supply 120V
Printer paper, 1 roll per package
Standard probe and hose assembly
Draft probe and hose assembly
285.00
80.00
8.00
215.00
235.00
Please inquire for NIST Certification
www.davis.com
P
Gas Detection / Environmental
0.1 to 99.9% (0.1% resolution)
1 to 250%
0.1 to 20.0% (fuel dependent)
0 to 9999 PPM
(comes with carbon monoxide
measurement)
These calculations are available for any of the 7 programmed fuels.
Custom fuels are available through the factory.
Sensor Accuracy
Oxygen
± 0.3% Oxygen (electrochemical)
Carbon Monoxide
± 5% of CO reading (electrochemical)
Temperature (stack)
± 4 °F between 32° and 255 °F
± 6 °F between 256 ° and 480 °F
± 8 °F between 481 ° and 2000 °F
Size
77⁄8" H x 31⁄3 W x 2" D
(220mm x 85mm x 50mm)
Weight
Approximately 1.5 lbs. (0.68 Kg)
instrument only
Power Source
Power by four disposable AA size alkaline
batteries providing a minimum of 8 hours
of continuous operation. An optional 120
power supply is available for line
operation
Display
A 20 character by 4 line alpha numeric
display with backlight
Warm Up Time
A 60 second total warm up - sensors are
checked and autozeroed during warm up
BA248042
PCA 10, Combustion Analyzer with
oxygen measurement, comes complete
with carrying case, probe and hose
assembly, factory calibrated & installed
sensor(s), instruction manual, user guide,
batteries and 2 year warranty
PCA 20, Combustion Analyzer with oxygen and
CO measurement, comes complete with carrying
case, probe & hose assembly, factory calibrated &
installed sensor(s), instruction manual, user guide,
batteries and 2 year warranty
PCA 25, Combustion Analyzer with oxygen, CO &
draft measurement, comes complete with carrying
case, probe & hose assembly, factory calibrated &
installed sensor(s), instruction manual, user guide,
batteries and 2 year warranty
1087
Methane Gas Leak Detector with Alarms
• Monitors for leaks in domestic gas pipelines
• Flexible measurement probe for hard to reach locations
• Optical and audible alarms signal when limits are exceeded
• Optional TopSafe Protective Case protects from dirt and impact
Applications
• Flexible probe for measurements in hard to reach places
• Detects leaks in connections, seals, and storage tanks
• Not for use in explosive atmospheres
SPECIFICATIONS
Measuring Range
1st alarm limit
2nd alarm limit
Alarm display
Lifetime
Dimensions
Weight
Warranty
0 to 10,000 ppm CH4
from 200 ppm CH4
10,000 ppm CH4
Optical display via LED and audible alarm
signals when limits are exceeded
>5 h
7.5" x 2" x 2"
approx. 11 ozs.
1 year
Catalog No.
Model
Description
TT0316
TT0189
TT0550
0316
0189
0550
Gas leak detector with instruction manual and battery
TopSafe Protective Case, durable case with stand, protects from dirt and impact
Accessories set (for instrument without TopSafe) to attach instrument to wall, belt, etc.
Price
Combustible Gas Detector
P
NIST
• Sensitivity: as low as 5 ppm
• Probe length: 15 inches
• Visual leak size indicators
• Automatic warm-up
• Audible “geiger counter”
signal
• Adjustable sensitivity
• Cordless operation
• Low battery indicator
• Long, flexible probe
• Includes deluxe carrying case
• Intrinsically safe-MSHA
tested in methane-air
mixtures only
• UL classified
Gas Detection / Environmental
$249.00
40.00
19.00
it
Detects
Hydrocarbons:
Methane (Natural Gas)—Ethane—Propane—Benzene—Acetylene—Butane—NButane—Isobutane—Pentane—Hexane—Gasoline—Toluene—Naphtha
Halogenated Hydrocarbons:
Methyl Chloride—Methylene Chloride—Tricholoroethane—Vinyl Chloride
Alcohols:
Methanol—Ethanol—Propanol—Butanol
Ethers:
Methyl Ether
Ketones:
Methyl Acetate—Methyl Ethyl Ketone—Acetone
Other Gases:
Sulfur Dioxide—Ammonia—Carbon Monoxide—Hydrogen Sulfide—Hydrogen—
Chlorine
Chemicals:
Industrial Solvents—Dry Cleaning Fluids—Lacquer Thinners
Catalog No.
Model
Description
TI437101
TI43202
TI43203
TI437105
8800A
8801
8806A
8803A
Combustible Gas Detector
Replacement sensing tip
Replacement NiCad batteries
Battery charger
Price
$239.95
24.95
34.95
24.95
Please inquire for NIST Certification
1088
Davis Inotek Instruments
www.davis.com
Combustible Gas Leak Detector
GAS-Mate is perfect for checking leaks in residential
and commercial combustion appliances, such as natural
gas- or propane-fired heating systems, or gas pipelines.
• Sensitive to 5 ppm methane (twice
as sensitive as nearest competitor)
• Small sensor and probe tip permit
leak checking in tighter places
• Runs continuously for 60 hours on
two alkaline “D” cells
• Auto zeroing for ignoring background gas levels in leak test area
• Maximum set-point and adjustable
sensitivity helps pinpoint leaks fast
• Variable audio alarm and flashing
LED indicate leak strength
• Also detects natural gas, propane,
butane, cyclopentane, ethane,
ethanol, isobutane and ammonia
• 2-year replacement warranty
SPECIFICATIONS
Sensitivity to Methane
Power
5 ppm
2 D-size (1.5-volt) alkaline batteries (use Duracell®
MN1300 to maintain intrinsically safe approval)
Probe
chrome-plated flexible metal, approx. 17" (43 cm) long
Dimensions
8.8" x 2" x 3" (22.4 cm x 5.1 cm x 7.6 cm)
Weight with Batteries
1.54 lbs. (700 gm.)
Operating Temperature
32°F - 113°F (0°C - 45°C)
Certifications
UL913 Class I, Division I, Group A, B, C and D
Met Laboratories Listing #E112145
Base package includes hydrocarbon gas sensor, two Duracell® MN1300 D-size batteries and
a hard plastic storage case
Catalog No.
Model
Description
Price
IF706600
706-600-G
GAS-Mate Combustible Gas Leak Detector
$235.00
Combustible Leak Detector
This Portable Gas Leak Detector is small and
lightweight, making it a unique portable leak detection device for all type of service work. The unit’s
high instrument sensitivity will pinpoint even the
smallest leaks quickly. A calibrated alarm indicates
the presence of most types of combustible and toxic
gases like methane, propane, carbon monoxide,
gasoline and refrigerants.
SPECIFICATIONS
Three C-size alkaline batteries supply approx. 8 hours use
10ppm methane
Solid state, 16" Probe length
Visual and audio at approximately 10% of L.E.L. for methane
Can be calibrated for other concentrations or gases
Approximately 1 min.
Instantaneous
Continuous
3.5" x 10" x 1.6"/1.3 lbs.
Catalog No.
Description
SF672100
Combustible Gas Leak Detector
HXG-1 with carrying case, battery,
earphone and wrist strap
P
Gas Detection / Environmental
Power supply
Sensitivity
Sensor
Alarm
Alarm set
Warm-up
Response time
Duty cycle
Dimensions/Wt.
• Solid state sensor can not be
poisoned
• Ultra sensitive — Detect as little
as 10PPM methane
• Wide range nullable tick detection— Usable in high gas concentration
• Adjustable alarm level — Easily
set for most tasks
• Quiet alarm button — Allows
continuous searching
• Includes carrying case, wrist
strap and earphone
Price
$299.00
PARTIAL LIST OF GASES DETECTED
Acetone
Ammonia
Carbon Monoxide
Ethylene Oxide
Gasoline
Hydrogen Sulfide
Industrial Solvents
Lacquer Thinners
Propane
Refrigerants
Davis Inotek Instruments
Natural Gas
Alcohol
Steam
Butane
Halon
Hydrogen
Jet Fuel
Smoke
Methane
Naphtha
www.davis.com
1089
Combustible Gas Leak Detector
NIST
it
The CD100A is the perfect serviceman's tool designed to detect combustible gas leaks in residential
and small commericial applications.
Its semiconductor sensor responds instantaneously
to all combustible gases, allowing you to pinpoint the
source of the gas leak or to verify the work you've just
completed is leak free.
The easily adjusted, steady tic rate increases as the
sensor tip approaches the source of the leak and then
decreases as it moves away, giving you a precise indication of the leak source. A flashing LED is provided to
give a visual indication, and a “tip light” in the sensor
cover illuminates the area of the leak.
The CD100A also provides a headphone jack, so the
instrument can be used in noisy environments. With its
long, flexible gooseneck and sensor cap, the CD100A
can be used in tight quarters where others might not fit.
When done, simply wrap the gooseneck around the integral boot for easy storage and gooseneck protection.
SPECIFICATIONS
Catalog No. Model
UE1001
UE1002
UE101
Description
Price
CD100A Combustible Gas Leak Detector $159.95
HE1000
Headphones
10.50
AC501
Hard Carrying Case
27.00
Please inquire for NIST Certification
Sensitivity
Tic Adjustment
Tic Indication
Battery
Sensor
Dimensions
Weight
50 ppm
Fully adjustable thumbwheel
Flashing LED
9 volt alkaline, 5 hours typical use
Solid state semiconductor
8" x 4" x 1-1/2"
15 oz.
Combustible Gas Leak Detector
NIST
it
The CD200 has a long, slim gooseneck probe and a bright LED tip light
to find leaks in tight areas. Its adjustable alarm, easy one-hand operation
and impact resistant storage case add up to value and convenience.
• Adjustable tick rate to locate leaks quickly and easily
• Visual leak detection by LED indicators
• Separate user adjustable alarm for predetermined level
detection
• Precision sensor detects even the smallest leaks
P
SPECIFICATIONS
Gas Detection / Environmental
1090
• Tip light illuminates search area
• Fast response of less than two seconds to 40% LEL
• Includes earphone
• Three year limited warranty
Power Supply
Sensitivity
Sensor
Warm-up
Response Time
Recovery Time
Duty Cycle
Battery Life
Probe Length
Operating Environment
Level Indications
Four AA alkaline batteries
<50 ppm Methane
Solid state
Approximately one minute
<two seconds (to 40% LEL)
<four seconds (from 40% LEL)
Continuous
Approximately 12 hours (Alkaline)
18"
+ 32 to + 122°F (0 to + 50°C), 10 to 90% RH
Audible: Adjustable tick with separate adjustable alarm; Visual: Six LED's ranging
from green to red
Standard
Replacement Sensor; Replacement Sensor Cap; Earphone
Partial List of Gasses Detected: Acetone; Ammonia; Steam; Halon; Industrial Solvents; Lacquer Thinner; Select
Refrigerants; Jet Fuel; Alcohol; Butane; Gasoline; Hydrogen Sulfide; Propane; Natural Gas (methane); Naptha
Davis Inotek Instruments
Catalog No.
Model
Description
UE1003
CD200
Combustible Gas Leak Detector
Please inquire for NIST Certification
Price
$219.95
www.davis.com
Helium Detector
NIST
it
Accurate Leak Pinpointing in a Portable Instrument
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
The Model 9822 Helium Detector is easy to operate. Once turned on the instrument automatically
begins sampling in the continuous mode. A calibration cycle will be performed automatically every 15
minutes while the device is being operated. In addition if the unit is not operated for 15 minutes, an
automatic shut-off mechanism prevents battery
rundown.
The batch mode draws in a single sample, analyzes it and displays the percentage of helium
found on the LCD display. A push of the “RUN”
button starts the batch model no other input is required from the operator. Each cycle requires only
10 seconds.
The Model 9822 Helium Detector has a wide
range of sensitivity. It will detect both small and
large leaks-from 0.01 to 100 percent. The sensing
SPECIFICATIONS
Catalog No. Model
MRK100101
(% helium) 0.01 to 100%
-4°F to 122°F (-20°C to 50°C)
12V rechargeable gel cell battery
A minimum of 8 hours continuous
operation
10 seconds
3-piece adjustable metal probe
One in line filter
6.5 lbs (3 kg)
41⁄8"(10.5cm) high
81⁄8"(22.3cm) deep
71⁄2"(19.1cm) wide
Description
9822
Helium Detector
Please inquire for NIST Certification
Davis Inotek Instruments
• Fast, accurate leak pinpointing
• Continuous sampling or batch
modes
• Selectivity for helium
• High sensitivity
• Portable, rugged
• Easy to operate
Applications
• Underground Storage Tank
Systems
• Aircraft Maintenance
• Process Piping Systems
• Pressurized Cables
• Other Containment Vessels
Helium Detector Comes
Complete With:
• Headphones
• Battery Charger
• Extension Tubes
• Probe Tip
• Collection Boot
• Sampling Hose & Filter
• Carrying Bag
• Water Stop Filter
Price
$4,999.00
www.davis.com
P
Gas Detection / Environmental
Operating range
Operating temperature range
Power Source
Operating Time
(without recharge)
Operating Cycle in Batch Mode
Probe
Filter System
Net Weight
Dimensions
technology used in this instrument allows helium
to be distinguished from other background gases so
leak pinpointing becomes an easy operation.
A rugged plastic case surrounds the instrument
making it ideal for field applications. The 12-volt
rechargeable gel cell battery will give at least 8
hours of operation on a single charge. A battery
charger is included with each Helium Detector.
Weighing just 6.5 pounds, the Mark Model 9822
Helium Detector is a truly portable leak pinpointing device. No extraneous wires, delicate parts, or
carrier gases are required to operate the unit. The
adjustable shoulder strap makes the instrument a
convenient, compact device that can be taken to
virtually any field site without hand trucks or dollies. The Mark Model 9822 Helium Detector is made
in the USA and comes with a full 1-year warranty.
1091
Combustible and Helium Gas Leak Detectors
NIST
it
The Digital Gas Leak Detector is a microprocessor controlled
multigas monitor that has been miniaturized, producing a handheld instrument capable of detecting very small gas leaks quickly,
safely, and without risk of contamination.
There are two models of the detector available. The EPD-3000
and EPD-5000 models is certified for use in flammable atmospheres. The instruments display is principally calibrated to quantify Helium leaks in ml/sec, but it has the ability to detect other gases. Advanced software features on both models allow the user to
program the unit to auto-range, to hold maximum readings, and to
screen out interference from background gases.
The EPD-3000 is calibrated against Helium (He) and displays
only in ml/sec. This means that although other gases are detected,
the displayed readings relate only to Helium.
The EPD-5000 offers the user a choice of units, allowing accurate
readings of all gases in ml/sec, ppm or cu.ft./yr. The EPD-5000 also
offers other advanced features, such as datalogging with accurate
time & date stamp record keeping. No cables are required with the
dated download as the connection is through an infrared port.
• Detects any gas with a different thermal conductivity than air
• Digital Display
• NIST/NAMAS Traceable
• Intrinsically Safe
SPECIFICATIONS
Detector
Sensitivity
Gas Detection / Environmental
P
1092
Response
Power Reqs
Operating Time
Calibration
Dimensions
Weight
CE Marked
Acetylene
Ammonia
Argon
Benzene
Butane
Carbon Dioxide
Carbon Disulfide
Carbon Monoxide
Ethane
Ethylene
Freon
Micro volume thermal conductivity cell
He 1 x 10-4
CH4 1 x 10-4
R12 8 x 10-5
Ar 1 x 10-4
1 second with 1 second clear down time
4 x AA batteries
20 hours
Certified to International NAMAS/NIST standards
385 x 60 x 50 mm
with batteries, 0.6 kg (1.1 lbs)
Helium
Hydrogen
Hydrogen Sulfide
Methane
Neon
Nitrogen
Nitrous Oxide
Propane
Sulfur Dioxide
Sulfur Hexafluoride
Xenon
Minimum Detection Level in cc/sec
Cat. No.
Model No
UE25420
UE25423
UE25421
UE25422
EPD-3000
EPD-5000IS
EPD-5000
EPD-PRL
Davis Inotek Instruments
Hydrogen
2 x 10-5 cc/sec
R12
1 x 10-4 cc/sec
R1301
6 x 105-5 cc/sec
R134a
2 x 10-5 cc/sec
Helium
2 x 10-5 cc/sec
SF6
5 x 10-5 cc/sec
R22
1 x 10-4 cc/sec
Carbon Dioxide
3 x 10-4 cc/sec
Methane
2 x 10-4 cc/sec
Argon
2 x 10-4 cc/sec
Ammonia
6 x 10-5 cc/sec
Benzene
******
Butane
5 x 10-5 cc/sec
Ethane
1 x 10-3 cc/sec
Ethylene
******
Hydrogen
******
Sulphide
******
R11
1 x 10-3 cc/sec
Solvents
******
Xenon
******
Nitrogen
******
Neon
******
******Detectable but no minimum detection level quoted
Any Gas With a Different Thermal Conductivity than Air
Description
Helium Gas Leak Detector
Intrinsically Safe Gas Leak Detector
Gas Leak Detector with Datalogging
Portable Leak Reference
Please inquire for NIST Certification
Price
$1,995.00
2,390.00
2,995.00
1,500.00
www.davis.com
Portable Electronic Gas Leak Detector
For locating and measuring leaks quickly, precisely and cleanly
• Readings can be interpreted “at a glance”
• Sensitivity automatically adjust to leak rate
• Maximum leak rates recorded and displayed
• Display units to suit user specification
• Extra security provided by standard leak calibration
• High sensitivity detection of gas or vapor leaks
• Clean, dry, positive location of leaks
• Robust construction for laboratory and plant use
• Leak rate measurements with calibration facility
• Easy access, even to difficult test sites
• Selection of preset sensitivity factors
Applications
On Production Lines as part of quality assurance
procedures in manufacturing
• Refrigeration and air conditioning units
• Welds, seals and connectors
• Valves and Waterproof enclosures
• Military equipment
• Medical products
In the Hospital/Laboratory
• testing of medical gas systems, cylinders, piping networks, fittings and apparatus
• For checking gas cylinders, regulators, valves and
pipework
• For testing chromatographs and mass spectrometers
For Plant Equipment
• Testing of pressurized containers before transport and
storage
• Checking pipework and transfer lines before
commissioning
SPECIFICATIONS
Sensitivity (in cc/sec)
Detector
Detects
Display units
Functions
Response Time
Recovery Time
Audio
Diagnostics
He 1x10-5, R12 8x10-5, CH4 1-10-4, CO2 1x10-4, Ar 1x10-4
Micro volume thermal conductivity cell
Gases with a thermal conductivity different to air
Selectable: cc/sec, cc/min, cu ft/min, ppm
Peak hold, Zero, Calibrate, Gas type, Nozzle type
Less than 1 second
1 second
Fixed volume, variable frequency audio output
Battery low indication
Detector cell failure alarm
Operating Time
Maximum 9 hours from dry cell
Batteries
One PP3 dry cell or rechargeable battery
Recharging Time
19 hours from total discharge
Supply and Battery Charger
115 or 230 volts 50/60 Hz
Carrying Case Size
(3 in x 10 in x 14 in) 8.5 cm x 26 cm x 36 cm
Weight (Hand unit)
440 g (1 lb)
Total including case
1.5 kg (3 1/3 lb)
Comes complete with probe clip, protective rubber case, extension probe, rechargeable battery, battery charger and carrying case.
P
Model
Description
Price
QT420101
QT420102
Q196
—
Portable Gas Leak Detector
Calibrated leak reference (Helium)
$1,695.00
440.00
Davis Inotek Instruments
www.davis.com
Gas Detection / Environmental
Catalog No.
1093
Bacharach Dual Refrigerant and Combustible Leak Detector
The Informant™ 2 leak detector allows pinpoint detection of both refrigerant and
combustible gas leaks with the same instrument.
Its unique combination of state-of-the-art patented sensor technology, advanced
software design and microprocessor-controlled circuitry offers you unmatched precision coupled with tremendous speed. It is unquestionably the most sensitive, most
reliable, most accurate leak detector on the market today. And the fastest.
Swap sensor tips within seconds and never worry about adjusting sensitivity levels-it’s taken care of automatically-even where high levels of background vapors or
refrigerants are present. The refrigerant sensor tip is finely tapered to .2” diameterso you can get in between coils and fittings, gaining access to hard to reach areas.
The Informant™ 2 leak detector features an audible indicator with a mute option
coupled with sequential LEDs to monitor increasing concentrations of refrigerant
or combustible gases. Dual bar graph displays offer visual confirmation no matter
what position the instrument is in. And a flashing light at the tip of the probe
helps to visually define your sampling location.
• One instrument - two functions
• Lightweight and ergonomically designed
• Swap sensor tips in seconds
• Microprocessor controlled for accuracy and reliability
• Sensitivity is automatically adjusted
• Sensors are the industry’s most responsive
• Hydrophobic filter prevents moisture contamination
• Optional rubber boot holds MagLite® flashlight
• Sequential flashing probe tip, dual LED displays and loud tick rate
indicates relative concentration levels
• Detects all halogens and scores of hydrocarbon gases
• Response time is two-tenths of one second
• Probe length adjustable from 3” to 20”
• Lifetime warranty available
Informant™ 2 Deluxe
SPECIFICATIONS
Gas Detection / Environmental
P
1094
Sensing Elements
Refrigerant
Combustible
Refrigerants Detected
Combustible Gases Detected
Alarm Sensitivity
Refrigerant
Combustibles
Alarm Types
Power Source
Warm-up Time
Response Time
Refrigerant
Combustibles
Battery Life
Probe
Size
Weight
Agency Approvals
Refrigerant
Combustible
Refrigerant/Combustible
Heated Diode - U.S. Patent No. 5,932,176
Patented semiconductor type. Five year typical life. Plug-in replacement
All CFC and HCFC Refrigerants containing Chlorine, Florine, R134a, HFCs, R12, R22, R123
All combustible gases covered by Class I, Division 1, Groups C and D
.25/oz/year of R134a (hardest to detect refrigerant)
Minimum 50 PPM (Methane)
Audible and dual visual LEDs
Four (4) AA disposable alkaline batteries included
10 seconds
2/10 second
2/10 second
4-5 hours of continuous operation
20” (50.8 cm) fully extended; 3” (7.62 cm) if wrapped around instrument
1.75” W (4.44 cm) x 9.75” L (24.76 cm) x 2.4” h (6.1 cm)
.6 lbs. (302.5 grams)
UL certified to meet SAE J1627
MET lab certified to UL 913, intrinsically safe for use in Class I, Division 1, Groups C and D
CE-Mark
Catalog No. Model
Description
BA140
BA141
BA142
19-8040
19-8041
19-8042
BA145
19-8045
Informant™ 2 Kit, Refrigerant Only Instrument with soft carrying case, check gas, refrigerant sensor and tip, filters
Informant™ 2 Kit, Combustible Only Instrument with soft carrying case, combustible sensor and tip, filters
Informant™ 2 Dual Detection Refrigerant & Combustible Instrument with soft carrying case, check gas, refrigerant
and combustible sensors and tips, filters
Informant™ 2 Deluxe Kit, Dual Detection Instrument with boot, soft carrying case, MagLite®, hard carrying case,
check gas, refrigerant & combustible sensors and tips, filters
Davis Inotek Instruments
Price
$325.00
325.00
395.00
459.00
www.davis.com
Halogen Leak Detector
Certified To Meet SAE J1627 for R134a, R12 and R22
The Model 5750A Super Scanner features visual
leak size indicators, reset button and a scan mode
which increases sensitivity up to 10 times that of
other detectors
The visual leak size indicators consisting of 7 high
brightness LED’s begin to light up as you approach
the leak. The more LED’s on, the larger the leak.
The audible-leak indicator has a computer-like
beeping sound, which increases in speed as you approach leaks.
The reset switch makes leak detection very precise
and efficient.
Once the 5750A is turned on, the sensitivity is at
its highest. If the unit starts to beep rapidly before the
leak is found, just press the reset button. This will automatically recalibrate the leak detector’s sensitivity
to the ambient atmosphere surrounding the tip. This
feature allow you to “home-in” and track down the
leak.
• Visual leak size indicators
• High efficiency pump
• Additional probe for hard to reach
applications
• Finds leaks in contaminated
atmospheres
• Super-sensitive: responds to
minute traces of halogen gas
• Cordless: operates on two C-cell
batteries (3 volts)
• Sensor not poisoned by large
doses of refrigerant
• Instant on—no warm up
• Constant power indication
• No dangerous or poisonous gases
are generated
• Rugged probe with flexible cord for
hard-to-reach areas
• Made in U.S.A.
• Detects R134a, R12 and R22
refrigerants
SPECIFICATIONS
Probe cord length
Warm-up time
Sensitivity
Operating
temperature range
Power Supply
Battery Life
Duty Cycle
Weight
Dimensions
36"
Instantaneous
Automatically set at turn-on
As low as 1⁄2 oz. per year
32° to 125° F
Two size “C” alkaline batteries
Approximately 50 hours, normal usage
(alkaline batteries)
Continuous, no limitation
20 oz
8' x 3" x 1.8" (20.32cm x 7.62cm x 4.6cm)
Cat. No.
Model
Description
TI43619411
5750A
Halogen Leak Detector
Price
TI27
555
Maintenance kit with 3 sensing tips and 3 tip protectors
$275.00
24.95
Automatic Halogen Leak Detector
areas
• Made in USA
Davis Inotek Instruments
Cat. No.
Model
Description
TI436145
5050A
TI38
TIF554
Automatic Halogen Leak Detector with extra sensing tip,
tip protector, 12 filters, batteries & carrying case
Maintenance Kit for 5050
Price
$189.00
24.95
www.davis.com
P
Gas Detection / Environmental
Sophisticated electronics make this the most automatic Leak
Detector you can buy. Simply turn it on and begin searching for leaks. A
computer-like beeping signal increases in both speed and frequency as
the leak source is approached. So sensitive to halogen, it detects leaks
as small as 1⁄2 oz. per year. It automatically recalibrates itself when
turned off and on. Two C-Cell batteries provide cordless operation for
over 300 service calls. Competitive pricing and ultra-sophisticated circuitry make the 5050 the Leak Detector you cannot do without.
The 5050 Automatic Halogen Leak Detector may be used on air
conditioning and refrigeration systems. The unit detects Ethylene
Oxide gas leaks in hospital
• No calibration required
sterilizing equipment (detects
• Finds leaks in contaminated atmospheres
freon mixture) and
• Super-sensitive, responds to minute traces of
detects SF-6 in high voltage
halogen gas 1⁄2 oz. year leak-rate
circuit breakers.
• Auto-set control, re-sets to any ambient level
Detects most gases contain• Cordless, operates on two C-cell batteries (3 volts)
ing chlorine, fluorine and
• Sensor not poisoned by large doses of refrigerant
bromine e.g. halogen gases.
• Instant on, no warm up
Also detects the cleaning
• Constant power indication
agents used in the dry
• No dangerous or poisonous gases are generated
cleaning industry.
• Long flexible stainless probe for hard-to-reach
1095
Halogen Leak Detector
• Microprocessor control, with Advanced Digital Signal Processing
• Tricolor visual display
• Seven (7) levels of sensitivity provide an increase of up to 64x
• Real time sensitivity adjustment
• Battery Test function with Battery voltage indication
• Certified to SAE J1627 for R134a, R12, R22
• Detects ALL Halogenated Refrigerants
• Cordless and Portable, operates on 2 “C”-cell batteries
SPECIFICATIONS
Ultimate Sensitivity Less than 0.1 oz/yr (3 gr/yr) for all halogen based
refrigerants
Sensing Tip Life
Approx. 20 hours
Operating Temp
30° to 125°F (0° to 52·C)
Dimensions/Wt.
9" x 2.5" x 2.5" / 1.2 lbs.
Catalog No. Model
Description
TI221
XP-1
TI222
TI224
TI226
XP-2
XP-4
XP-6
”Halogen Hawk” Automatic Pump
Style Halogen Leak Detector
Maintenance Kit (6 Tips, 6 Protectors)
Deluxe Carrying Case
Probe Assembly
Refrigerant Leak Detectors
49.95
29.95
69.95
NIST
it
SPECIFICATIONS
Detector
Gas Detection / Environmental
$399.00
Highly sensitive to refrigerant gases, particularly HFC, Hydrocarbon and
CFS’s, the R2PC will detect 134a R11, R12, R22 and many more. It is fast to
respond to even the smallest leaks and with a special power management
system it optimizes the rechargeable batteries reducing charging time to
less than five hours. A new anti-contamination feature operates the sensor’s
heater even when the unit is off which means it is ready for use when needed and it will not be contaminated by any gases.
The R2PC has a search locate audible tone and a flashing LED. It displays leak rates or concentrations in PPM readings. Use with batteries or
plug in to an outlet via adapter and operate permanently.
P
1096
Price
Composite microprocessor controlled ceramic with low
sensitivity to interfering gases such as alcohol.
0.2 gm/yr (5 ppm) R134a
Min. Detectable
Level
Detects
All CFC, HFC and HCFC gases
Response
1 second, clear down to zero 5 seconds
Alarm Level
15 gm/yr
Probes
Standard 100 mm, Long 300 mm, Flex and stay
Charge Power Supply
UK Plug
1/VS-10
Europlug
1/VS-11
USA Plug
1/VS-12
Dimensions
275 mm L x 60 mm W x 50 mm D
Weight
400 gm
• High Sensitivity
• Detect all known Refrigerants
• Measures Leak Rate
• 3 GM/yr. Minimum Detection
• Anti-contamination Protection
Davis Inotek Instruments
Catalog No. Model
Description
UE25430
UE25431
Refrigerant Leak Detector
115VAC AC Adapter
R2PC
EPD-R
Price
$1,585.00
40.00
Please inquire for NIST Certification
www.davis.com
Refrigerant Leak Detector
The RLD10 makes pinpointing leaks as easy as
one, two! Detect leaking refrgerant using the high
sensitivity mode then switch to the low sensitivity
mode to pinpoint its source. If background noise
makes the audible tic hard to hear, you can count
on the color scaled LED indicators.
• Auto zeros when turned on
• Color scaled LED's indicate refrigerant leak rate
• Two postion sensitivity selector
• Audible tick rate
• Long gooseneck probe
• One-handed operation
• Automatically detects all existing halogen refrigerants and blends
• One year limited warranty
P
SPECIFICATIONS
One 9V battery
Advanced ionization detection
.5 oz. per year R134A
Audible: Variable tick; Visual: Scaled LED array
<10 second
<1 second
Continuous
Approximately eight hours
18-1/2"
32 to 102°F (0 to 40°C), 0 to 80% RH (noncondensing)
Catalog No.
Model
Description
UN119501
Accessories
UN991489
UN991491
RLD10
Refrigerant Leak Detector
AC319
AC506
Small Soft Carrying Case
Deluxe Hard Carrying Case
Davis Inotek Instruments
Price
$179.00
17.50
45.00
www.davis.com
Gas Detection / Environmental
Power Supply
Sensor
Sensitivity
Indicators
Warm-up
Response Time
Duty Cycle
Battery Life
Probe Length
Ambient operating conditions
1097
Particle Counter
NIST
it
Two particle size channels, data logging and battery operation
• Sizing Selection from 0.3 µm to 5.0 µm in 0.1 µm increments
• Battery-operated hand-held
• Two sizing channels
• Extended data storage, 4,000 data records
• May be used in network applications
• Ventilation Inspections
• Facility Monitoring
• Process Measurement
• Clean Room Monitoring
• Workplace Surveys
• Filter Testing
SPECIFICATIONS
Display
Keyboard
Particle Size Range
Concentration Range
Flow Rate
Number of Channels
Sample Time
Communication
Operating Temperature
Power
Size
Weight
16 character x 4 line LCD
7 key membrane type
0.3 to 5.0 µm in 0.1µm steps
0 - 3,000,000 particles per cubic foot
0.1 cfm (2.83 lpm)
2
adjustable 6 to 999 seconds
Selectable RS-232, RS-485, Printer
Selectable baud rate
0 to + 50°C
Self-contained battery, 6V NiCd
6.5 in (l) x 2.1 in (h) x 4.0 in (W)
26 oz (0.737 kg)
Catalog No.
Model
MT521
GT-521 Particle Counter Handheld
Please inquire for NIST Certification
Description
Particulate Air Monitor
Price
$3,999.00
NIST
it
Haz-Dust is a Real Time Dust Monitor Designed for Industrial Hygiene, Indoor
Air Quality and Haz-Mat Air Monitoring Investigations
For all types of dusts & aerosols
• Lead
• Silica
• Welding fumes
• Coal
• Wood/Paper
• Cadmium
• Concrete/Cement
• Chromate
• Nuisance dusts
• Smoke
Gas Detection / Environmental
P
1098
Catalog No. Model
EZ415061
EZ419163
EZ415064
HD-1000
2A-101
BP-101
• Grinding dusts
• Pharmaceuticals/
Dry chemicals
• Paint spray
• Heavy metals/
PCB’s
• Grain
• Construction
dusts
• Toxic soil
remediation
Description
Haz-Dust 10 µm Particulate Air Monitor
Zeroing Accessory
Battery pack replacement
Please inquire for NIST Certification
Davis Inotek Instruments
Price
$2,595.00
195.00
125.00
SPECIFICATIONS
HD-1000 Haz-Dust
10 µm Particulate Monitor
Display
LCD 3.5 digits mg/m3
concentration reading
Calibration
NIOSH 0600 using ARD test dust
Sensing range
0.01-200 mg/m3
Particle size range
0.01-50 µm
Precision
± 0.02mg/m3
Accuracy
± 10% to NIOSH 0600
Power
Ni-Cad rechargeable battery
Operating time
Greater than 8 hours
Charging time
10-12 hours
Signal output
0-2 volt
Humidity
95% non-condensing
Dimensions
9" x 4" x 2"
Weight
3 pounds
DL-102 Data Logger
Two key programmable operation. Real-time
clock & display. With software for statistics,
graph & reports. PC compatible.
Recording time
1 minute to 12 hours
Sampling rate
1 or 2 sec/sample
Display
LCD alphanumeric
Output
RS-232C (9600 baud rate)
Power
Ni-Cad rechargeable battery
Dimensions
7" x 3.5" x 2.5"
Weight
16 ounces
System comes complete with computer software, tripod stand, battery
charger, analog signal cable, computer interface cable, calibration
standard and cleaning kit
www.davis.com
Particle Monitor
NIST
it
• Self-contained
• Size selection, 5 ranges
• Total particle count
• Size discrimination
• Hand held package
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
SPECIFICATIONS
Display
Keyboard
Particle Size Range
Concentration Range
Flow Rate
Sample Time
Minimum Size Selection
Operating Temperature
Power
Size/Weight
12 character LCD
2 button membrane type
0.3 µm and greater
0 - 3,000,000 particles per cubic foot
0.1 cfm (2.83 lpm)
1 minute
0.3, 0.5, 1.0, 2.0, 5.0 µm
0 - + 50°C
Self-contained battery
6 in (l) x 2.5 in (h) x 3.5 in (w)
15.24 cm x 6.35 cm x 8.89 cm
1.625 lbs (.74 kg)
Catalog No.
Model
Description
MT321
GT-321
Particle Monitor Handheld
with battery charger
Please inquire for NIST Certification
Price
$2,150.00
Aerosol Mass Monitor
• Four size ranges
• Digital Display
• Ventilation System Testing
• Process Measurement
• Filter Testing
• Facility Monitoring
• Cleanroom Monitoring
• Emissions Sampling
• Mines
NIST
it
• Hand-Held
• Computer Interface
SPECIFICATIONS
Measuring Principle
Measurement Ranges
Catalog No.
Model
MT331
GT-331
Description
Gas Detection / Environmental
Concentration Limit
Measuring Sensitivity
Measurement Time
Flow Rate
Display
Digital Output
Operating Temperature
Power
Size/Weight
P
Particle discriminator, light scatter
<1 micron, PM 1 mass concentration
<2.5 micron, PM 2.5 mass concentration
<7 micron, PM 7 mass concentration
<10 micron, PM 10 mass concentration
300 micrograms
0.1 microgram
4 minutes
2.83 lpm (.1 cfm)
16 character LCD
RS-232
0-50°C
Self-contained battery
6 in (l) x 2.5 in (h) x 3.5 in (w)/1.63 lbs (.74 kg)
Price
Aerosol Mass Monitor
$2,350.00
Size Profiler with battery
charger, carrying case, serial
interface cable, and isokinetic probe
Please inquire for NIST Certification
Davis Inotek Instruments
www.davis.com
1099
Personal Dust Monitor
NIST
it
The only dust monitor that allows
true breathing zone measurements
& comprehensive graph reporting.
Application For Monitoring
• Lead
• Welding fumes
• Coal
• Concrete/Cement
• Nuisance dusts
• Grinding dusts
• Pharmaceuticals
• Paint spray
• Grain
• A Personal Air Sampling Pump with filter cassette &
A Real-Time Dust Monitor in one package
• Immediate display of concentration
• Interchangeable sampling heads
• Complete profile of dust patterns
• In-line filter can be weighed or analyzed
• Time vs. concentration graphs
Gas Detection / Environmental
P
1100
• Accurate size selective separations
• Fast documentation for compliance
• Reduced sampling time & costs
• Early warning audible alarm signal of approaching
threshold limits
• Comfortable Light Weight
• Miniaturized Sensor Design
The HD-1003 is a real-time personal dust monitor
with an internal air sampling pump that is microprocessor controlled. This allows for large data storage and on screen statistical calculations. The detached sensor is miniaturized and easily attaches to
the individual’s lapel for true breathing zone measurements. The sensor is further improved by the addition of optional interchangeable sampling heads for
respirable, thoracic and inhalable particulates. An
in-line 37mm filter cassette, after the optical sensor,
allows the user to collect concurrent filter samples
consistent with gravimetric methods. The unique internal “smart” microprocessor mathematically corrects for differences in particle size.
The sensing principal of the HD-1003 is near forward light scattering of infrared radiation. Signal
Catalog No. Model
Description
Price
EZ415210
HD-1002
HAZ-DUST II Personal Dust Monitor
$3,695.00
Individually worn dust/aerosol monitor for determining respirable, thoracic & inhalable
exposures Comes with choice of one sampling head (RS-102, IS-102 or TS-102) & in-line
filter cassette. Immediate display of stored data and statistics, RS232 computer interface,
complete with battery charger and carrying case.
Accessories
EZ415211
RS-103
EZ415212
IS-103
EZ415213
TS-103
EZ415214
CAS-103
Respirable Sampling Head - SKC
25mm aluminum cyclone, mounts
on inlet of HD-1002 sensor
Inhalable Sampling Head - Mounts on
inlet of HD-1002
sensor must be used for inhalable separations
Thoracic Sampling Head - Mounts on inlet
of HD-1002 sensor
Replacement Disposable Blank 2-piece
37mm Filter Cassettes- box of 25
Please inquire for NIST Certification
Davis Inotek Instruments
130.00
130.00
130.00
85.00
• Toxic soil remediation
• Silica
• Wood/Paper
• Cadmium
• Chromate
• Tobacco smoke
• Construction dusts
• Dry chemicals
• Oil mists
• Easy to Operate
• Data Logging
• On Screen Display of Statistics
• Splash-Proof
• Data Security Code
• Adjustable Alarm Signal
• Enhanced Accuracy
processing internally compensates for noise and
drift, thus allowing high resolution, low detection
limits and excellent base line stability.
The signal processing electronics and microprocessor are enclosed in a compact case that attaches to
the individual’s waist. A real-time display reports
concentrations in milligrams per cubic meter.
Statistics such as; TWA, STEL, Max and Minimum
can instantly be viewed on the display. The internal
user adjustable alarm can be preset to alert the user
of approaching threshold limits.
The HAZCOMM software can also provide graphs
and further rigorous data analysis by importing data
points into spreadsheets such as Lotus or Excel.
SPECIFICATIONS
Display
Alpha-numeric LCD- 4
line, 20 character mg/m3
concentration reading
Operation
Three key splash proof
membrane switch - menu
driven
Calibration
NIOSH gravimetric using
ARD
Sensing range 0.01-200 mg/m3
Particle size 0.01-100 µm
range
Precision
± 0.02mg/m3
Accuracy
± 5% to NIOSH #0600
using ARD
Sampling flow 1.0 - 3.0
rate
liters/minute
Filter cassette 37mm disposable
Alarm output adjustable, intensity:90db
at 3ft.
Recording time1 second to 12 hours
Sampling rate 1 or 2 sec. per sample
Data storage 21,500 data points
Security code 4 digit combination
Memory & time > 10yrs
storage
Real-time clock & data display
Data display concentration in mg/m3
& TWA, MAX, MIN,
STEL, Time
Digital output RS-232
Operating Temperature 0 to 50°C
Storage temperature -20 to 60°C
HAZCOMM Software Windows™
driven
Power
Ni-cad
rechargeable
battery
Operating time
>8 hours
Charging time
10-12 hours
Humidity
95% non
condensing
Dimensions
9.75" x 3.50" x
2.45"(case)
Sensor dimensions
1.75" x 1.5"
Weight
2.75 lbs
2 year warranty on all parts and labor
www.davis.com
Microdust Pro Real Time Dust Monitor
• An incredible measurement capability from 1µgm3 to 2500 mgm3
• Comprehensive data-logger providing over 15,700 data points
• Detachable probe for identification of problem areas
• Options for TSP, PM10, PM2.5 or ISO Respirable measurement
• Instrument software calibration and zero routines
• 4 user defined calibration routines available for differing dust types
• Option of alkaline or rechargeable batteries
• 32bit WinDust pro PC software
Applications
• Occupational health and safety monitoring
• Site boundary monitoring and environmental measurement
• Industrial process monitoring
• Testing respiratory equipment or air filtration efficiency
• Research activities
NIST
it
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
SPECIFICATIONS
Sensing Technique
Ranges
Resolution
Operating Temp Range
Storage Temp Range
Battery
Operating Duration
Battery Charging
Analogue Output
Keypad
Weight
Dimensions
Display
Instantaneous reading
Scrolling Graphs
User Calibration
Routine Calibration
Internal Memory
Logging Interval
Recorded Values
Serial Interface
The Microdust pro is a portable, real time monitor for assessing the concentration of dust and
aerosol and is the only hand-held, real time dust
monitor on the market capable of graphically presenting variations in dust concentration on a real
time scrolling graph. No longer is it necessary to
wait to analyze results on a PC. The Microdust
pro features an incredible measurement range
from 0-2500 mgm3.
Each unit is supplied with an individual calibration insert which is used to perform a "onetouch" calibration in the field, without having to
return the instrument to the factory for calibration once per year. It is also possible to store up to
four "user calibrations" within the instrument for
different dust types. The unit may be powered by
either alkaline or rechargeable batteries, with an
additional fast charging circuit built in.
For longer term applications, the Microdust pro
may be fitted into the weatherproof
"Environmental Enclosure" accessory, which allows the user to collect data over 24 hour periods,
with a filtered sample for laboratory analysis. It is
possible to use this device for total, PM10, PM2.5
and respirable sizes of dust.
Catalog No.
Model
Description
CEL5040
176000A
CEL5041
176093A
Microdust pro portable, real time monitor kit includes calibration insert, software, RS232 cable,
rechargeable batteries (x4), power supply, clean air bellows and hard carrying case
Environmental enclosure with sampling pump, internal battery, filter holder, PM10,
PM2.5 & respirable filters and charger in weatherproof case
Davis Inotek Instruments
Price
$3,400.00
1,299.00
www.davis.com
P
Gas Detection / Environmental
Time weighted average
Near forward light scattering - 880 infra red
All instruments provide 0 to 2500 mgm3 over four
ranges as standard:
0-2.5, 0-25, 0-250, 0-2500 mgm3
Active range may be fixed or auto-ranging
0.001 mgm3 (1µgm3)
0 to 50°C (non condensing)
-20°C to + 55°C
4 x AA/MN1500 cells - Alkaline or rechargeable NiCd
Alkaline, typically >20 hours
NiCd cells, typically >9 hours
Internal NiCd fast charger circuitry
0 to 2.5 VDC FSD, 500Ω output impedance
7 key tactile membrane
Instrument only = 0.97 kg (complete with case 4.5 kg)
Probe = 35mm Ø x 290 mm total length
Instrument H x W x D — 245 x 95 x 50 mm
Carry case H x W x D — 135 x 490 x 370mm
128 x 64 pixel LCD backlight graphics panel
Rolling average concentration over a user selectable
period (1 to 60 seconds)
Average concentration since power on or reset
Maximum value Maximum concentration since
power on or reset
Real time graphs of dust concentration
Selectable time-base periods of 100/200 seconds,
15 minutes or 60 minutes
Y axis may be auto-ranging or fixed
Four user defined calibration settings available
Software calibration for zero and span setting
Optical calibration filter supplied (restores factory
calibration)
64K EEPROM providing 15,700 data points
Adjustable from 1 to 600 seconds
Individual, average and max/min concentrations over
logging period
RS232 up to 38.4K baud
1101
Airborne Particle Monitor
NIST
it
Air-Aide Model 3000 Airborne
Particle Monitor is a portable
handheld survey tool for measuring lung damaging particulate
matter. The unique sensor design
has applications in indoor air quality, HVAC, environmental and industrial hygiene. Results are immediately displayed and stored in
memory. The supplied PC software
allows for graphical and statistical
representation of the total dust
generating process, eliminating
the need for repetitive and costly
filter gravimetric analysis.
P
• Direct reading with high resolution and stability
• Active sample flow using a long-life air sampling pump
• Location codes; user-defined audible alarm; security code restricts
unpermitted use
• In addition to the standard TSP (no size-selective inlet), optional
particle size separation at PM-2.5, 4.5 µm (ISO respirable), and
PM-10 through the use of replaceable foam inserts.
• Rechargeable battery. Unit runs on AC or DC power
• Easy interchangeable battery system
• Large data storage capacity - can run continuously for 15 months
without downloading
• On-screen programming of sampling and data storage parameters
• Easy to clean optical sensor
• Downloading of stored data through an RS232 port. PC-based software supplied to download and graph stored data
• Selection of different built-in calibration factors for fine and coarse
particulate matter
• CE, ETL approved
Ask about
Gas Detection / Environmental
2 Year
1102
NIST
Save 50%
on 2nd year
recalibration
•.For exposure monitoring of all dusts & aerosols
• Lead
• Welding Fumes
• Silica
• Coal
• Wood/Paper
• Concrete/Cement
• Cadmium
• Nuisance Dusts
• Chromate
• Toxic soil remediation
• Tobacco smoke
• Construction Dusts
• Dry Chemical
• Oil mists
• Grinding Dusts
• Pharmaceuticals
• Paint Spray
• Grain
• Pre-determination of air quality for ventilation system design
• Survey of work place for OSHA compliance and related health reasons
• Monitoring indoor air quality in factories, offices or homes for respirable particulates
• Measuring EPA related ambient particulate levels
• Hazardous waste sites, construction areas, and materials handling
facilities
Catalog No. Model No
Description
E2415320
AA-3000
E25415325
AA-FM2.5-5
E2415326
E2415321
E2415322
FH-2.5
CS-105
SL-103
Real-time Airborne Particle Monitor complete with monitor, battery and charger, PC graphing software,
digital computer cable, instruction manual and carrying case
5 piece package of Size Selective Foam Inserts for 2.5µm particle size cut point. Must use with 2.5µm
Insert Holder
Insert Holder for Part Number AA-FM2.5-5 Foam Insert
Calibration Span Insert for verifying factory calibration of Air-Aide monitor Model AA-3000
Audible Siren/Strobe Light for alarm output of Air-Aide Model 3000 with relay and battery power source
Please inquire for NIST Certification
Davis Inotek Instruments
Price
$3,395.00
30.00
35.00
200.00
525.00
www.davis.com
Haz-Dust® Particulate Respiratory Health Safety Monitor
NIST
it
Real-Time Environmental Particulate Air Monitor
• For exposure monitoring of all
dusts & aerosols
• Lead
• Welding Fumes
• Silica
• Coal
• Wood/Paper
• Concrete/ Cement
• Cadmium
• Nuisance Dusts
• Chromate
• Toxic soil remediation
• Tobacco smoke
• Construction dusts
• Dry Chemicals
• Oil mists
• Grinding Dusts
• Pharmaceuticals
• Paint Spray
• Grain
• Measure Ambient Particulate
Levels
• Quantify Off-Site Particulate
Migration
• Dust profiling for Indoor Air Quality
• Determining level of respiratory
protection
• Survey of workplace for
OSHA/EPA compliance
• Surveying for PM 2.5, PM-10 and
TSP levels
• Monitoring dust generation during
drilling/excavation operations
• Evaluating worker exposure to airborne contaminants
• Locating and identifying “Hot
Spots”
• Emergency response & fugitive
emissions compliance
• Evaluating worker exposure to airborne contaminants
• Dust collector/ ventilation system
checks
• Monitoring lung damaging particulates in factories & buildings
• Can compliment all OSHA & EPA
personal and ambient particulate
air sampling procedures
SPECIFICATIONS
Display
Operation
Catalog No.
Model No
Description
EZ415331
EPAM-5000
EZ415334
EZ415332
EA415333
EPAM-1.0
EPAM-2.5
CS-105
HAZ-Dust Environmental Particulate comes complete with carrying case, SW-102 PC Software,
Computer cable, Shoulder strap, battery charger with 10 µm particle impactor
21.0 µm particle size cut point impactor for HAZ Dust Model EPAM-5000
2.5 µm particle size cut point impactor for HAZ Dust Model EPAM-5000
Calibration Standard - for verifying calibration of EPAM-5000
Please inquire for NIST Certification
Davis Inotek Instruments
Price
$4,295.00
130.00
130.00
200.00
www.davis.com
P
Gas Detection / Environmental
Large alphanumeric LCD-4 line, 20 character
Four key splash proof membrane switch —
menu driven
Calibration
NIOSH gravimetric method
Sensing range
.001-20.0 mg/m3; .01-200.0 mg/m3 (optional)
Particle size range
0.1 - 100 µm
Precision
+/- 0.003 mg/m3 (3 µg/m3)
Accuracy
+/-5% to NIOSH #0600 using ARD
Sampling flow rate
1.0 - 2.3 liters/minute
Filter cassette
37 mm disposable
Alarm output
90db at 3 ft.
Recording time
1 sec. to 15 months
Sampling rate
1 sec., 10 sec., 1 min., and 30 min.
Data storage
21,600 data points
Memory & time storage >10 years
Real-time clock & data display
Data display
Concentration in mg/m3 & TWA, MAX, MIN,
STEL, DATE, Time
Digital output
RS-232
Operating Temperature -10°C to 50°C
Power
Rechargeable battery
Dimensions (case)
14.0" x 6.0" x 10.0"
Weight
12 lbs
• Immediate display and data storage of lung damaging aerosols. Designed
to investigate air for environmental, indoor air quality and industrial hygiene
• Unique aerodynamic particulate sizing and in-line filter cassette allows for
concurrent gravimetric samplings
• Housed in temperature compensated portable water-tight carrying-case
with 24 hour battery capacity
• Optional solar panel and strobe alarm light
• Windows NT, 98 compatible
• Patent pending dynamic sensor design
• Infrared light scattering
• .001mg/m3 resolution (1µg/m3)
• Internal air sampling pump with adjustable flow rate
• In-line gravimetric filter cassette
• Inter-changeable size selective sampling inlets 1.0 µm, 2.5 µm, and 10.0
µm cut points
• Security and codes for protection of data integrity
• Waterproof carrying case
• Large data storage. Capacity-up to 15 months
• 24 hour rechargeable battery capacity
• Automatic clean air purging of sensor for increased stability and accuracy
• Internal temperature compensation for ambient use
• Optional solar panel power
• Optional strobe/siren alarms
• CE, ETL approved
1103
Air Flow Calibrators
NIST
• Primary flow gas measurements, NIST traceable with accuracy of
± 0.5% of any display
• Suitable for verifying vacuum and pressure applications
• Field portable, rechargeable NiCad batteries provide up to 8 hours use
• Auto shut off batter saver
• One button control
• Microprocessor controlled
• Instant readout of flowrates
• Air Flow Calibrators Include: Calibrator, AC adapter-charger, Soap film
solution, Dispenser bottle, Operating manual
it
The mini-Buck™ Calibrators are microprocessor-controlled and provide accurate and instant readout of flow
rate. Since the flow rate is calculated electronically, accurate measurements at any altitude are possible within ±0.5%. With the soap film solution contained in a
spill-resistant flow cell, the mini-Buck is portable for
field operation and ready to use with just a push of a
button.
The mini-Buck Calibrators use an established and
highly accurate method to measure th flow rate of air
sampling pumps. The calibrator is connected to the
pump or other flow device by tubing. When the flow is
activated, a thin soap film travels upward within a
small, precision flow cell. As the soap film passes two
infrared sensors, the time spent between the sensors is
fed to a microprocessor, which uses this data to calculate the flow rate.
The mini-Buck™ Primary Flow Calibrator is more
than a calibrator for vacuum and pressure sampling
pumps. It's also suitable for verifying rotameters,
setting instrument flow panels, and calibrating gas
chromatographs and other analytical instrumentation.
Three Models give a wide choice of operating ranges:
• Model M-5
1 to 6000 cc/min
• Model M-30
100 cc to 30 LPM
• Model M-1
0.1 to 300 cc/min
Catalog No.
Model
Description
AP1081
AP1085
AP1086
AP1087
AP1088
AP1089
AP1090
NISTFL53
NISTFLQ53
M-1(APB-801000)
M-5 (APB-805000)
M-30 (APB-803000)
APB-108000
APB-107030
APB-108010
APB-108012
—
—
mini-Buck™ Air Flow Calibrator, 0.1 to 300 cc/min
mini-Buck™ Air Flow Calibrator, 1 to 6000 cc/min
mini-Buck™ Air Flow Calibrator, 100cc to 30LPM
Carrying case
8 oz. soap solution
AC adapter/charger, 110 volt
Ac adapter/charger, 220 volt
NIST Traceable Certificate with Data
2 Year NIST Traceable Certificate with Data
Price
$895.00
895.00
1,075.00
125.00
20.00
35.00
75.00
225.00
337.00
Validated Sampling System
Gas Detection / Environmental
P
1104
Patented S.T.P. flow control mode automatically
corrects for changes in temperature and pressure,
so no matter where you take these pumps, you always get the correct sample flowrate. Ideal for
personnel and area sampling applications in the
laboratory and plant. (U.S. Patent 5,996,422)
Catalog No.
Model
Description
AP1092
AP1100
AP1082
AP1083
AP1093
AP1084
AP1098
AP1099
Buck-Genie APB-929000
Buck-Genie APB-929200
Buck-Genie APB-942900
Buck-Genie APB-942910
APB-601900
APB-605900
APB-603900
APB-603910
VSS-5™ Pump Kit w/o charger ETL, CETL, CE
VSS-5™ Pump Kit w/o charger EX, D, CE
VSS-5™ Pump 5-pack w/FastFive Charger ETL, CETL, CE
VSS-5™ Pump 5-pack w/FastFive Charger EX, D, CE
FastOne Charger 120/230 VAC
FastFive Charger 120/230 VAC
Standard Charger single station 120 VAC
Standard Charger single station 230 VAC
Davis Inotek Instruments
Price
$795.00
795.00
4,750.00
4,750.00
135.00
475.00
50.00
65.00
www.davis.com
Precision Electrostatic Locator
Reliable on-the-spot measurement of static
charges has never been easier than with the
portable Model 300B. Hand-held, yet highly accurate, the ACL300B answers three basic questions:
1) Is static present and on what surfaces, materials or people?
2) How much static?
3) What is the polarity of the charge?
The instrument is ideal for use in such static
sensitive environments as electronic component
production and assembly areas, clean rooms, computer, medical and R&D laboratories, surgical
rooms, medical device manufacturers, printing
presses, packaging and production lines, etc.
No auxiliary attenuators or heads are required;
the ACL300B is completely self-contained. To
minimize error from extraneous state fields, the
unit utilizes a recessed nickel-plated sensing electrode which operates on a high/low circuit. The
low range measures 0-500 volts at 0.5" to the surface being measured, and 0-3,000 volts at 4". The
high range measures 0-5,000 volts at a distance of
0.5" and 0-30,000 volts at 4". For repetitive measurements, the ACL300B features a unique "quick
zero" function which instantly rezeroes the instrument and provides ground compensation for the
user.
Ask about
2 Year
NIST
Save 50%
NIST
it
• Measures static charges from zero to 30,000 volts
• Convenient pocket size
• Designed for close-in repetitive readings
• Uses standard 9 volt battery
• Battery test feature
• Low drift
• Repeatability ± 1%, accuracy ± 10%
• One-year warranty on parts and labor
on 2nd year
recalibration
SPECIFICATIONS
Catalog No.
Description
ACL300B
NISTMG38
NISTMG39
NISTMGQ38
NISTMGQ39
Precision Electrostatic Locator
NIST Traceable Certificate
NIST Traceable Certificate with Data
2 Year NIST Traceable Certificate
2 Year NIST Traceable Certificate with Data
Davis Inotek Instruments
Price
$385.00
99.00
130.00
148.00
195.00
www.davis.com
P
Gas Detection / Environmental
Weight
5.5 oz. (with battery)
Size
4 3/8" x 2 5/8" x 1 5/16"
Repeatability
± 1%
Accuracy
± 10%
Note: Accuracy is dependent on three factors
1) The instrument must be properly zeroed
2) The distance from the surface of the sensitive electrode to the target or surface under examination must be accurately defined
3) The target must be large relative to the sensitive electrode
For total accuracy, the target to be tested must be 2" x 2" or larger at the 1/2" range. At the 4" read range, the target must be a minimum of 16" x 16". Smaller
target will result in inaccurate readings.
1105
Digital Static Locator
NIST
it
The ACL350 Digital Static Locator is a non-contact meter that indicates electrostatic field voltage
and polarity on charged surfaces. This easy to use
instrument comes equipped with a Power On/Hold
button and a zero button.
The meter automatically shuts off after approximately 90 seconds. The unit's grounding path is
through its conductive case, so there is often no
need to wear a grounded wrist strap during normal operations. The easy to read 3 1/2 digit LCD
display automatically updates three times per second. Measurements are dependent on the distance
from the object being measured.
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
SPECIFICATIONS
Gas Detection / Environmental
P
1106
• Easy to read 3-1/2 digit LCD, automatically displays measured
voltage
• Unique 1 inch spacer for accurate and repeatable measurements
• Automatic, positive implied, negative polarity indication
• Battery status indication: "BAT" is displayed when volt age is too low
for proper function
• Sample measurement "HOLD" control and LCD indication
• Defined grounding path through conductive case and strap
• Standard 9V battery power supply
• 1 year parts and labor warranty
• Fine leather case with "quick release" belt clip at no additional cost
• Measures static fields up to 20,000 volts in standard mode in 100
volt increments
• Accurate within ± 10%
• Convenient, semi-automatic "Push to Zero" feature
• Fast response; displays updates three times per second
• Battery SavR™ timeout: automatic shut off in 90 seconds
• Battery life over 200 hours
• Lightweight an compact; only 5 ozs.
• 4.2 inches x 2.47 inches x 0.9 inches
Multi-range function:
@ 1 inch: 0-20,000 volts in 100 volt increments
@ 1/10 inch: 0-2,000 volts in 10 volt increments
@ 4 inches: ± 40,000 volts (multiply reading by 2)
@ 6.5 inches: ± 60,000 volts (multiply reading by 3)
@ 8.5 inches: ± 80,000 volts (multiply reading by 4)
Catalog No.
Model
AC121350
NISTMG38
NISTMG39
NISTMGQ38
NISTMGQ39
ACL350
—
—
—
—
Davis Inotek Instruments
Description
Digital Static Locator
NIST Traceable Certificate
NIST Traceable Certificate with Data
2 Year NIST Traceable Certificate
2 Year NIST Traceable Certificate with Data
Price
$515.00
99.00
130.00
148.00
195.00
www.davis.com
EMF/ELF Meter
NIST
it
Measure Electromagnetic Radiation levels from Video Terminals, Fans,
Faulty Wiring, Power Lines and Other Equipment
• Large 1⁄2" (13mm) LCD 3 1⁄2 digit display of electromagnetic field (EMF)
level in Milligauss or MicroTesla
• Complete with operations manual and application notes
SPECIFICATIONS
Range (milliGauss)
Frequency Bandwidth
Number of Axes
Accuracy
Overrange Indication
Sampling Time
Power
Dimensions
Weight
Catalog No. Model
0.1mG to 199.9mG (0.01 to 19.99 µTesla)
30 to 300Hz (ELF frequency range)
Single axis
± 4% at 50-60Hz
Displays 1--2.5 times per second
9V battery
5.2x2.8x1"
6oz
Description
Price
EH11948056 480822
Electromagnetic Field Meter
EH1194702 409992
Pouch carrying case
Please inquire for NIST Certification
$99.00
10.00
ELF Meters
Lightweight and completely self contained, the easy
to use 4000 Series ELF Meters are ideal for commercial
or home use. They measure Extremely Low Frequency
magnetic fields generated by electrical equipment.
Applications include detecting magnetic field emissions
from a wide variety of sources, such as video display terminals (VDTs), power lines, office equipment, household
appliances, and all types of electrical and electronic
equipment. The Model 4080 features three axis sensors
to insure that measurements remain accurate regardless of the instrument orientation.
P
Model
# of Axes
Auto Ranging
Minimum Resolution
Measuring Range
Accuracy Error
Frequency Response
± 5%
-3 dB
Calibration Frequency
Display
Measurement Type
Battery Life (typical)
Operating Temperature
Power Source
Weight
Size
Davis Inotek Instruments
4080
Three
Yes
0.1 mG
0.1 - 511 mG (std)
0.01 - 51.1 µT (opt)
<± 2%, typical
± 5% max
40-600 Hz
25/1000 Hz
60 Hz
1
3 ⁄2 digit LCD
True RMS
50 hours
-10° C to + 50°
9V alkaline
5 oz.
4.7" H
2.4" W
1.0" D
• 0.1 mG resolution
• High accuracy
• Three axis technology — Maintains
accuracy regardless of orientation
• True RMS measurement
• NIST Traceable Calibration at 50/60 Hz
• µT Scale (optional)
• Complete with deluxe carrying case
and battery
• Hand-held portability
• Analog and DC outputs available upon
request
Catalog No.
Model
Description
FW852005
4080
ELF Meter, 3-axis
Price
Gas Detection / Environmental
SPECIFICATIONS
$259.00
www.davis.com
1107
Electrostatic Fieldmeter
NIST
it
The Electrostatic Fieldmeter is a compact,
portable instrument for measuring electrostatic charge. The FMX-002 measures positive and negative polarity elecrostatic
charges to 20kV (20,000V) at a distance of
one inch (25 mm). Two LED guide ring lights
on the measuring side of the unit converge at
the proper distance from a charged test object. The conductive case and ground lead facilitate reference grounding for accurate measurement.
The FMX-002 can be also used for periodic
verification of ionizer balance performance to
±200V by attaching a charge plate.
• Portable, compact and
lightweight
• Auto-ranging digital display
• Bar graph indicates field polarity
and intensity
• Automatic off function
Catalog No.
CM4008744
CM4008745
CM5051021
• HOLD function holds even after
power is turned off
• Battery condition display
(4 stages)
• Multi-function alarm
• Easy plate attachment for ion
balance measurement
Model
Description
4008744 Compact Hand-held Fieldmeter
4008745 Fieldmeter with charge plate
5051021 Charge plate only
Please inquire for NIST Certification
Price
$525.00
575.00
89.00
Microwave Survey Meter
Gas Detection / Environmental
P
1108
• Determining static charge levels and the need for neutralization
• Deciding the placement of static eliminators
• Periodic verification readings
NIST
it
The HI- 1501 provides accuracy and portability
for widespread use by oven manufacturers, service technicians, regulatory agencies, and public
health officials. It is virtually immune to failure
caused by excessive fields. Three ranges are available for increased resolution in microwave
leakage measurement.
SPECIFICATIONS
Calibrated at 2450MHz
Three Ranges
Accuracy
Response Time
0-2, 0-10, and 0-100mW/cm2
± 1.0 dB (0-2 and 0-10 scales)
0 to 90% of final value for a step input
Fast: 1 second
Slow: 2.5 seconds
Maximum Power Density 2.0W/cm2
Probe Length
(12 inches)
Cable Length
1.2 meters (4 feet)
Instrument Package
3.5" x 6" x 2.5"
Dimension
Shipping Weight
5lbs.
Catalog No.
Model
HR74199
HI-1501
Microwave Survey Meter
Please inquire for NIST Certification
Description
Davis Inotek Instruments
Price
$699.00
www.davis.com
Microwave Monitors
NIST
it
Portable Non-Ionizing Radiation Detector Designed for Personal Protection
from RF Radiation
The HI-3510 Personal RF/Microwave Monitor
is a portable device designed to detect and alert
the wearer to potential harmful levels of electromagnetic radiation
The HI-3510 expands on the capabilities of the
popular HI-3520 RF/Microwave Monitor, allowing
the selection of an instrument depending on the
frequency to be monitored. The HI-3510 can detect non-ionizing radiation from RF and microwave sources in the frequency range of 50 MHz
to 2.5 GHz. The HI-3520 RF/Microwave Monitor
detects non-ionizing radiation in the frequency
range of 1 to 18 GHz.
The HI-3510 allows the user to set the alarm
warning level anywhere in the range from 0.2 to
20 mW/cm2 . The measurements are displayed on
a three digit LCD readout. A ten segment bar
graph, which is normalized to the selected alarm
warning level, aids in obtaining a quick visual determination of the hazard level.
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
P
Model HI-3510
Power Density Range
Alarm Accuracy
Battery
Power Density Indicators
Alarm Signals
Size
Weight
50 MHz 2.5 GHz
0.01 to 20 mW/cm2
+/- 2 dB, 50 MHz to 1.2 GHz,
+ 1/-3 dB, >1.2 to 2.5 GHz
Lithium, 1000 Hours
Three digit LCD, Bar graph
Flashing LCD or Flashing LED, Audible
Beep
94 x 69.9 x 27.9 mm
142 gm (5 oz.)
• Instantaneous and 6 minute
average readings
• Flashing LCD and LED
indicators
• Alarm rate and flash rate
directly proportional to field
strength
• Adjustable audible alarm
• Bar Graph Display
Catalog No. Model
HR1881001
Davis Inotek Instruments
Applications
• FM Radio
• Television
• Cellular telephone
• Microwave
• Welding
Description
Price
HI-3510 50 MHz to 2.5 GHz Monitor
Please inquire for NIST Certification
$1,527.00
www.davis.com
Gas Detection / Environmental
SPECIFICATIONS
1109
RF/Microwave Hazard Measurement System
NIST
it
A combination Graphical Readout and
Datalogger, the HI-4460 employs a large backlit
LCD to display multiple numerical and graphical
EMF representations. With the touch of a button,
users can view (selectively or simultaneously) resultant field intensity readings, individual axis
readings, individual isotropic contribution, peak
field readings, running time graphs, percent of
standard readings, etc.
Its setup screen are menu driven, allow a large
selection of options to be performed in minimal
time and make the instrument flexible enough
that it can be used for a single one-time EMF
reading or a complex site management operation.
The HI-445x probe family enables wideband
frequency coverage and response in just a few
probes
Fiber Optic Connectivity provides the isolation
necessary to minimize field perturbations and
allows for more accurate measurements and
readings.
• Wide frequency coverage for flexible measurement capabilities
• Interchangeable Isotropic Field Probes
• Expandable and Versatile
• Telecommunications, Microwave/RF and Industrial Applications
• RF Exposure Measurements and Compliance Determination
• Percent of Exposure Standard Calculations
• Data logging & averaging
• RS232 interface & field analysis software
• Percent of exposure standard calculations & selection of units
Ask about
2 Year
NIST
Gas Detection / Environmental
P
1110
Save 50%
Applicatiuons:
• Telecommunications/Broadcasting Site Surveys
• RF Leakage Measurements and Mapping
• Antennae EMF Power Level Contour Mapping
• Industrial Environment Measurements
• Power Line Emissions and Contour Mapping
• Human Health Hazard Measurements
on 2nd year
recalibration
Catalog No.
Model
Description
HR4460
Probes
HR4450
HR4453
HR4455
HR4456
Accessories
HR4413P
HR570123
HI-4460
Model
HI-4450
HI-4453
HI-4455
HI-4456
Graphical Handheld EMF Readout
Description
RF Probe, High Frequency Electric Field
RF Probe, High Frequency, 3-Axis Electric Field
RF Probe, High Frequency Electric Field
RF Probe, Electric Field (True RMS)
HI-4413P
570123
RS-232 Fiber Optic Modem
ProbeView EMF Analysis Software
Please inquire for NIST Certification
Davis Inotek Instruments
Price
$3,395.00
Frequency Response
80MHz-40GHz
80MHz-40GHz
200kHz-40GHz
300MHz-18GHz
Dynamic Range
1-300 V/m
1-300 V/m
2-300 V/m
30-1000 V/m
9,595.00
10,395.00
5,865.00
4,293.00
299.00
695.00
www.davis.com
2 GHz RF Field Strength Analyzer
Technicians can predefine and store tests so that
they may run quickly at a test site.
The unit can also compare the difference in
strength of signals on two separate frequencies. An
internal, push-button-selectable, -10 dB attenuator
enables input sensitivity to be adjusted in order to extend measurement range. A demodulator and speaker or headphone jack provide audio output for AM, FM
or SSB signals at a user-controlled marker frequency.
• Lightweight, portable, battery
operated for
go-anywhere testing
• 100 kHz-2060 MHz range for
AM, FM, TV, PCS,
cellular, and mobile radio
• Graphic user interface and calculator keypad for fast, intuitive
set-ups
SPECIFICATIONS
Memory
Data Memory
Setup Memory
Frequency Counter
Bandwidth
Resolution
Input Impedance
Max Input Volts
Input Sensitivity
9 MHz to 2000 MHz
20 MHz to 1000 MHz
2 MHz to 2800 MHz
General
Input Impedance
Max. Input Volts
Measurement Units
Attenuation
Dimensions
Weight
Standard Accessories
Frequency
Range
Step
Modes
Level Measurements
Narrow Band FM
Range
Bandwidth
Wide Band FM, AM and SSB
Range
Bandwidth
AM and SSB
BFO Freq. Range
Displays
Display Modes
Squelch Level
Scan Modes
Scan Rate
Catalog No.
Model
TM7500
7500
Please inquire for NIST Certification
Davis Inotek Instruments
Description
2 GHz RF field strength analyzer
9 MHz to 2060 MHz
1 kHz
50 ohms
5 Vrms
150 mV
100 mV
500 mV
192 x 192 pixels LCD, light green, with
backlight RS-232/Parallel interface
with female 8-pin mini DIN connector
50 ohms, 75 ohms with software compensation
5 V rms.
dBmV, dBmV, dBmW
0 dB or -10 dB internal.
0 dB to -60 dB with external attenuator
Height: 9 inches (229 mm)
Width
4 inches (102 mm)
Depth
1.77 inches (45 mm)
1.4 lbs.
(6) 1.5 V AA rechargeable NiCad batteries,
recharger, vehicle power adapter,
detachable 9" whip antenna, operator's manual,
RS-232 cable and software,
carrying case and strap, earphone
100 kHz to 2060 MHz
5 KHz to 9995 KHz in multiples of kHz
or 6.25 kHz
Narrow Band FM, Wide Band FM, AM and
Single Side-Band modulated signals
P
$2,195.00
Gas Detection / Environmental
The Model 7500 RF Field Strength Analyzer
is the world's first portable instrument to combine the functionality of a graphic spectrum
analyzer, frequency counter, and tunable RF
monitor in a 1.5 pound, hand-held instrument.
Its wide 100 kHz to 2060 MHz frequency range
covers mobile, PCS, cellular and cordless
phones, AM, FM, TV, amateur, satellite, aeronautical, and marine frequencies.
Compatibility with AM, single side band
(SSB), and narrow or wide band FM, plus a frequency counter mode, make the Model 7500
ideal for a variety of RF signal detection and
verification tests. The 7500 operates non-invasively by sensing RF fields through a compact
whip antenna (included).
The 800 MHz antenna can be removed
for direct connection to a signal source, or
changed to permit optimal matching to other
frequencies.
Stores 10 displays of up to 160 channels
per display
Stores 10 setups for each scan mode/10
readings in counter mode
www.davis.com
1111
Level Meas.
-70 dBmV to -20 dBmV (1 MHz to 2060 MHz)
2.5 kHz (-6 dB)
Level Meas.
-60 dBmV to -10dBmV (1 MHz to 2060 MHz)
Wide band FM: Approx. 180 kHz,
Approx. 2.4 kHz
Up to ± 1.5 kHz above or below carrier
Spectrum, bar graph and frequency counter
0 to full scale, variable
Manual, channel (memory scan) and search
scan
12.5 channels per second
Price
Gauss/Tesla Meter
NIST
it
SPECIFICATIONS
Model
Measuring Circuit
Basic Accuracy
Frequency Bandwidth
Sampling Rate
Ranges
from
to
Resolution
low range
high range
Display
Digits
Readings
General Information
Analog Output
Communication Port
Operating Temperature
Storage Temperature
Battery
Meter Size
Length
Width
Height
5060
5070
5080
4%
DC
10/sec
2
2 kG
20 kG
2%
DC - 10 kHz
10/sec
2
2 kG
20 kG
1%
DC - 20 kHz
10/sec
3
300 G
30 kG
1.0 G (100 µT)
10 G (1µT)
LCD
31⁄2
Gauss
Tesla
1.0 G (100 ¨µT)
10 G (1 µT)
LCD
31⁄2
Gauss
Tesla
Ampere/Meters
0.1 G (10 µT)
1.0 G (100 µT)
LCD
33⁄4
Gauss
Tesla
Ampere/Meters
°C/°F
± 3V F.S.
RS-232
0 °C to + 50 °C
-20 °C to + 60 °C
Two 9V Batteries
5.2" (132 mm)
5.3" (135 mm)
1.5" (38 mm)
5000 SERIES SELECTION GUIDE
Specification
Probe Included
Auto Zero
Max / Min Hold
True RMS
Auto Range
True Peak Hold
Relative Mode
Outputs (analog)
Comm. Port(s)
Model 5080
•
•
•
•
•
•
•
•
•
Model 5070
•
•
•
•
Model 5060
•
•
•
Gaussmeter DMM Adapter
Gas Detection / Environmental
P
1112
Catalog No.
Model
FW852001
FW852002
FW852003
5060
5070
5080
Description
Price
4% Accuracy Gauss / Tesla Meter
2% Accuracy Gauss / Tesla Meter
1% Accuracy Gauss / Tesla Meter
Please inquire for NIST Certification
$695.00
795.00
1,095.00
NIST
it
• Provides range, versatility, flexibility and economy for applications that
do not warrant the expense of a standard gaussmeter.
• Use your own DMM — simply attach the DVG to your DMM in place of
the probe leads
Applications:
• Classify magnets
• Measure residual fields
• Measure stray and leakage fields
SPECIFICATIONS
Range
Bandwidth
Sensitivity
Accuracy
Flexibility
Compact Size
± 1 - 1000G DC, ± 1 - 700G RMS
DC to 5k Hz
1mV = 1G
± 5% Plus DVM Accuracy
6’ cable with choice of either Transverse (T) or
Axial (A) Probe
2 1/4" W x 3 7/8" L x 1 1/4" D
Catalog No. Model
WS100
WS171
Description
Price
DVG-1T Gaussmeter with Transverse Probe $229.00
DVG-1A Gaussmeter with Axial Probe
229.00
Please inquire for NIST Certification
Davis Inotek Instruments
www.davis.com
Portable Hand-Held Magnetometer/Gaussmeter
NIST
it
• Fully portable magnetometer/gaussmeter
• Broad measuring range - ± 10 Gamma (± 1/10,000 Gauss)
to ± 150.0 kG with select probes
• Differential field measuring capability to ± 0.01 gauss
• Measures DC Fields ± 10 milligauss to ± 19.99 kG with 1X probes
• Analog output ± 200mV with overrange
• Four full scale ranges 20 gauss to 20kG
• Touch pad controls
• 3 1/2 digit ± 0.1% bipolar display
• Wide selection of precalibrated probes + 0.1% to ± 1.5%
• Battery operated - 100+ hours continuous operation with standard 9V
alkaline battery
• Low battery warning
• Display light - for low ambient light conditions
• Small, compact, lightweight - 10 oz.
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
Applications:
• Ultra low field measuring
• Measure residual fields
• Analyze magnetic circuits and components
• Classify magnets
• Measure absolute & differential fields
• Plot field uniformity
• Field mapping
• Measure stray & leakage fields
• Quality control and inspection
SPECIFICATIONS
Display (Digital)
Range
Physical (less probe)
Size
Net weight
Shipping weight
Catalog No.
P
1.6" H x 3.6" W x 5.75" L (4.2 cm H x 9.1 cm W x 14.6 cm L)
8.7 oz. (0.25 kg)
1.25 lbs (0.57 kg)
Model
Description
WS1007
MG-7D
Hall Magnetometer/Gaussmeter
HP-17S
—
Tranverse Hall Probe-1.5% to 10kG
HP-27S
—
Axial Hall Probe-1.5% to 10kG
Includes probe, 6' probe cable, choice of carrying case or pouch, batteries & calibration certificate
Please inquire for NIST Certification
Davis Inotek Instruments
Price
$778.00
294.00
294.00
www.davis.com
Gas Detection / Environmental
Resolution
Instrument Accessory (Less probe)
Analog Output
Power
Power Consumption
Battery Life
3 1/2 digit ± 0.1% bipolar LCD - (Liquid Crystal Display)
4 full scale ranges: ± 20.0 gauss, ± 200 gauss, ± 2 kG and ± 20kG full scale
Magnetometer probe ± 10 gamma to ± 1.5 gauss
1X probes - ± 10 milligauss to ± 19.99kG
10X probes - ± 100 milligauss to ± 150.0kG
0.05% all ranges
% of reading ± 0.250%, ± 0.05%/°C, ± 1 digit all ranges
± 200mV at full scale of display; -300mV to + 1 V over-range
9V alkaline battery
40 milliwatts
Approximately 100 hours continuous operation with a fully charged battery.
Automatic low battery warning appears on the display when battery voltage drops to 7.5V.
1113
Fluxgate Magnetometers
Applications
• Package inspection
• Classroom demonstrations
• Residual field measurements (shielding effectiveness)
• Solenoid/Helmholtz coil calibration
• Field Mapping
• Vehicle magnetic signature measurements
• Measure Earth’s field vector components
• Magnetic environment monitoring
• Measure weak fields in rocks
SPECIFICATIONS
Single Axis
Triaxial
Model
FGM-3D2 - L or T
FGM-4D2 - L or T
FGM-4DTAM
FGM-5DTAA
Range
± 2000 mG
± 2000 mG
± 1000 mG
± 1000 mG
Bandwidth
DC to 100 Hz
DC to 400 Hz
DC to 100 Hz
DC to 100 Hz
Display
3 1/2 Digits
4 1/2 Digits
4 1/2 Digits
4 1/2 Digits
Resolution
0.01 Mg
0.01 mG
0.01 mG
0.01 mG
Accuracy
± 0.5% FS, ± 1 Count ± 0.5% FS, ± 1 Count
± 0.5% FS, ± 1 Count ± 0.5% FS, ± 1 Count
Neut. Option
± 600 milligauss
± 600 milligauss
N/A
N/A
Analog Output
± 2V
± 2V
± 2.5V
± 2.5V
Product Code Key: FGM (Fluxgate Magnetometer), Single Axis Only - 3 (3? Digit Display), 4 (4? Digit Display), D
(Digital Display), 2 (FGM Series), L (Longitudinal [axial] Probe), T (Transverse Probe), N (Neutralization [nulling]
Feature) Triaxial Only – 4 (FGM Series), 5 (FGM Series) D (4? Digit Display), TA Triaxial, M Manual Calculation, A
Automatic Calulation
Catalog No. Model
Description
WS94509
WS94501
WS945421
WS945422
WS94533
WS94534
WS94535
Single Axis Magnetometer with Transverse Probe, 3 1/2 digit
Single Axis Magnetometer with Axial Probe, 3 1/2 digit
Single Axis Magnetometer with Transverse Probe, 4 1/2 digit
Single Axis Magnetometer with Axial Probe, 4 1/2 digit
Triaxial 4 1/2 Digits, 100 Hz
Triaxial 4 1/2 Digits, 100 Hz
Neutralization Feature (3D2 & 4D2 Series Only)
FGM-3D2T
FGM-3D2L
FGM-4D2T
FGM-4D2L
FGM-4DTAM
FGM-5DTAA
—
Price
• Best instrument for precision measurement
of low level magnetic fields
• Superior stability, linearity and accuracy
• Single and Triaxial models
• CE Certified-Single Axis FGM-2 Series
• Traceable to NIST
$1,580.00
1,580.00
1,918.00
1,918.00
3,570.00
5,754.00
480.00
Portable Precision Gaussmeter
• High accuracy and resolution
• Measure DC and AC fields; True RMS readings
to 20 kHz with AC probes
• Range extendable to 150 kG with select probes
• Analog Output
• High impact foam-lined plastic carrying case
• Operates up to one year with standard “AA”
alkaline batteries
Gas Detection / Environmental
P
1114
Applications
• Measure residual fields
• Analyze magnetic circuits and components
• Classify magnets
• Measure absolute and differential fields
• Plot field uniformity
• Measure stray and leakage fields
SPECIFICATIONS
Ranges (3)
Display
Resolution
Accuracy
RMS Accuracy
Analog Output
Catalog No.
± 100 milligauss to ± 19.99 kG
3 1/2 digit 0.1% bipolar display
0.05% full scale
± 0.1%
± 1%
± 100mV
Description
Price
WS94201
WS94201A
WS94536
MG-4D Gaussmeter Package with HP-14S Transverse Hall Probe
$855.00
MG-4D Gaussmeter package with HP-24S Axial Hall Probe
855.00
MG-4D Gaussmeter Package with HP-145S Transverse Hall Probe
986.00
or HP-245S Axial Hall Probe
WS94537
Charger Eliminator 115V/220V
80.00
Package includes CC-4D Carrying Case, 6' Probe Cable, Batteries and NIST Calibration Certificate
Davis Inotek Instruments
www.davis.com
Nuclear Radiation Monitor
NIST
it
Measures Alpha, Beta, Gamma and X-rays
• Digital LCD display
• Adjustable alert level
• Count rate or accumulated count
• Geiger Mueller detector
• Easy conversion to mR/hr for Cs137 and Co60
• Interface to a computer or data logger
• Interface to an external warning device
• For Alpha, Beta, Gamma and X-rays
• Monitor personal radiation exposure
• Monitor an area or perimeter
• Detect radiation leaks
• Check for contamination
• Find radioactive items in the workplace or home
• Check for radioactive deposits in the ground
• Check for X-ray scatter
• Locate spills and lost materials
• Long battery life
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
P
Sensor
Display
Operating Range
Calibration
Power
Size
Weight
Geiger tube with mica and window (LND712) Detect Alpha, Beta, Gamma and X-radiation
6 mm(0.4-inch)liquid crystal display
0-19999 accumulated counts or 0-19999 counts per minute (approx. 0-20 mR/hr)
Cesium 137: 982 cpm per mR/hr
Cobalt 60: 958 cpm
Pulsating beeper sounds the alert. Alert level is adjustable in 10 count increments, 10-9990
Red LED flashes with each count
Chirps for each count (can be muted)
Dual miniature jack drives CMOS-compatible devices:
1) counts to computer or data logger
2) alert to external warning device
9-volt battery gives 3–6 months continuous use at normal background level; jack provided for optional AC adapter
150 x 80 x 30 mm (5.9 x 3.2 x 1.2 inches)
270 grams (9.5 oz.) including battery
Catalog No.
Model
IM16701
RADAlert
Alert
Count Light
Beeper
Outputs
Davis Inotek Instruments
Description
Nuclear Radiation Monitor with case
Please inquire for NIST Certification
Price
$399.00
www.davis.com
Gas Detection / Environmental
SPECIFICATIONS
1115
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement