Toshiba E-STUDIO600 Quick start manual
Below you will find brief information for Multifunctional Digital Systems e-STUDIO202L, Multifunctional Digital Systems e-STUDIO232, Multifunctional Digital Systems e-STUDIO282, Multifunctional Digital Systems e-STUDIO203L, Multifunctional Digital Systems e-STUDIO233, Multifunctional Digital Systems e-STUDIO283, Multifunctional Digital Systems e-STUDIO352. These systems are designed to help you scan, copy, print, and fax documents. The devices can be used for multiple purposes, such as creating copies of documents, sending faxes to other users, and printing documents from your computer. They also provide the ability to scan documents and save them to a variety of formats, including PDF, TIFF, and JPEG. The devices include user-friendly interfaces for easy operation and have advanced features like network connectivity for sharing documents.
Advertisement
Advertisement
MULTIFUNCTIONAL DIGITAL SYSTEMS
Quick Start Guide
READ THIS BOOK
First
TABLE OF CONTENTS
Chapter 1 SOFTWARE LICENSE AGREEMENT
SOFTWARE LICENSE AGREEMENT ..........................................................6
U.S. Government Restricted Rights ..........................................................7
SECURITY PRECAUTIONS ..........................................................................8
TRADEMARKS AND COPYRIGHT...............................................................9
Chapter 2 INTRODUCTION
ITEMS INCLUDED WITH THE PRODUCT..................................................12
ABOUT OPTIONAL EXPANSION KITS......................................................13
LINEUP OF OUR MANUALS ......................................................................16
To read manuals in PDF (Portable Document Format) files....................18
ABOUT THE CD-ROM.................................................................................19
ABOUT THE CLIENT SOFTWARE .............................................................20
Client Software for Printing Features.......................................................20
Client Software for Scan Features...........................................................20
Client Software for e-Filing Features .......................................................21
Client Software for Network Management...............................................21
Client Software for Network Fax Features...............................................21
Chapter 3 SYSTEM REQUIREMENTS
SYSTEM REQUIREMENTS.........................................................................24
General Requirements ............................................................................24
Fax/Internet Fax Features .......................................................................26
Electronic Filing (e-Filing) Features.........................................................27
TABLE OF CONTENTS 1
Chapter 4 CONNECTING TO THE DEVICE
CONNECTING TO THE USB PORT............................................................30
CONNECTING TO THE NETWORK............................................................31
Chapter 5 SETUP FLOW
OVERVIEW OF CONNECTIONS.................................................................34
Connecting Environment .........................................................................34
Available Features Under Each Connection............................................35
Setup the Network Document Processing System..................................38
INITIAL DEVICE SETUP..............................................................................39
SETUP FLOW FOR TopAccess .................................................................40
SETUP FLOW FOR USER MANAGEMENT ...............................................41
Setup Flow for Department Management................................................41
Setup Flow for User Management Setting...............................................42
Setup Flow for User Authentication for Scan to E-mail ...........................43
SETUP FLOW FOR PRINTING FEATURES...............................................44
Setup Flow for Microsoft Windows Workstation ......................................44
Setup Flow for Macintosh Workstation ....................................................56
Setup Flow for UNIX Workstation............................................................62
Setup Flow for FTP Printing ....................................................................65
Setup Flow for E-mail Printing .................................................................67
SETUP FLOW FOR SCANNING FEATURES.............................................69
Setup Flow for Scan to File .....................................................................69
Setup Flow for Scan to E-mail .................................................................71
Setup Flow for Remote Scan...................................................................73
SETUP FLOW FOR FAX FEATURES.........................................................75
Setup Flow for Network-Fax ....................................................................75
Setup Flow for Internet Fax .....................................................................77
Setup Flow for Onramp Gateway ............................................................80
Setup Flow for Offramp Gateway ............................................................82
SETUP FLOW FOR E-FILING FEATURE ...................................................85
Setup Flow for e-Filing Web Utility ..........................................................85
Setup Flow for e-Filing Client Software ...................................................86
2 TABLE OF CONTENTS
PREFACE
Thank you for purchasing the TOSHIBA Multifunctional Digital Systems or Multifunctional Digital
Color Systems.
This QUICK START GUIDE provides the setup flow for installation of the Multifunctional Digital
Systems or Multifunctional Digital Color Systems and contents of this product, reference manuals and CD-ROMs.
Before using the Multifunctional Digital Systems or Multifunctional Digital Color Systems, thoroughly read and understand this guide.
PREFACE 3
DISCLAIMER NOTICE
The following notice sets out the exclusions and limitations of liability of TOSHIBA TEC CORPO-
RATION (including its employees, agents and sub-contractors) to any purchaser or user (‘User’) of the e-STUDIO202L/232/282, e-STUDIO203L/233/283, e-STUDIO352/452, e-STUDIO353/
453, e-STUDIO520/600/720/850, e-STUDIO523/603/723/853, or e-STUDIO281c/351c/451c, including its accessories, options and bundled software (‘Product’).
1. The exclusion and limitations of liability referred to in this notice shall be effective to the fullest extent permissible at law. For the avoidance of doubt, nothing in this notice shall be taken to exclude or limit TOSHIBA TEC CORPORATION’s liability for death or personal injury caused by TOSHIBA TEC CORPORATION’s negligence or TOSHIBA TEC CORPORA-
TION‘s fraudulent misrepresentation.
2. All warranties, conditions and other terms implied by law are, to the fullest extent permitted by law, excluded and no such implied warranties are given or apply in relation to the Products.
3. TOSHIBA TEC CORPORATION shall not be liable for any loss, cost, expense, claim or damage whatsoever caused by any of the following:
(a) use or handling of the Product otherwise than in accordance with the manuals, including but not limited to Operator’s Manual, User‘s Guide, and/or incorrect or careless handling or use of the Product;
(b) any cause which prevents the Product from operating or functioning correctly which arises from or is attributable to either acts, omissions, events or accidents beyond the reasonable control of TOSHIBA TEC CORPORATION including without limitation acts of God, war, riot, civil commotion, malicious or deliberate damage, fire, flood, or storm, natural calamity, earthquakes, abnormal voltage or other disasters;
(c) additions, modifications, disassembly, transportation, or repairs by any person other than service technicians authorized by TOSHIBA TEC CORPORATION; or
(d) use of paper, supplies or parts other than those recommended by TOSHIBA TEC COR-
PORATION.
4. Subject to paragraph 1, TOSHIBA TEC CORPORATION shall not be liable to Customer for:
(a) loss of profits; loss of sales or turnover; loss of or damage to reputation; loss of production; loss of anticipated savings; loss of goodwill or business opportunities; loss of customers; loss of, or loss of use of, any software or data; loss under or in relation to any contract; or
(b) any special, incidental, consequential or indirect loss or damage, costs, expenses, financial loss or claims for consequential compensation; whatsoever and howsoever caused which arise out of or in connection with the Product or the use or handling of the Product even if TOSHIBA TEC CORPORATION is advised of the possibility of such damages.
TOSHIBA TEC CORPORATION shall not be liable for any loss, cost, expense, claim or damage caused by any inability to use (including, but not limited to failure, malfunction, hang-up, virus infection or other problems) which arises from use of the Product with hardware, goods or software which TOSHIBA TEC CORPORATION has not directly or indirectly supplied
4 DISCLAIMER NOTICE
1.
SOFTWARE LICENSE AGREEMENT
SOFTWARE LICENSE AGREEMENT .......................................................................6
1 SOFTWARE LICENSE AGREEMENT
SOFTWARE LICENSE AGREEMENT
INSTALLING OR OTHERWISE USING THIS SOFTWARE PRODUCT CONSTITUTES YOUR
ACCEPTANCE OF THE FOLLOWING TERMS AND CONDITIONS (UNLESS A SEPARATE
LICENSE IS PROVIDED BY THE SUPPLIER OF APPLICABLE SOFTWARE IN WHICH CASE
SUCH SEPARATE LICENSE SHALL APPLY). IF YOU DO NOT ACCEPT THESE TERMS, YOU
MAY NOT INSTALL OR USE THIS SOFTWARE, AND YOU MUST PROMPTLY RETURN THE
SOFTWARE TO THE LOCATION WHERE YOU OBTAINED IT.
THE SOFTWARE INSTALLED ON THIS PRODUCT INCLUDES NUMEROUS INDIVIDUAL
SOFTWARE COMPONENTS, EACH HAVING ITS OWN APPLICABLE END USER LICENSE
AGREEMENT (“EULA”). INFORMATION RELATING TO THE EULAS MAY BE FOUND IN AN
ELECTRONIC FILE INCLUDED ON THE USER DOCUMENTATION CD-ROM INCLUDED
HEREWITH; HOWEVER, ALL SOFTWARE AND DOCUMENTATION DEVELOPED OR CRE-
ATED BY OR FOR TOSHIBA TEC CORPORATION (“TTEC”) ARE PROPRIETARY PROD-
UCTS OF TTEC AND ARE PROTECTED BY COPYRIGHT LAWS, INTERNATIONAL TREATY
PROVISIONS, AND OTHER APPLICABLE LAWS.
Grant of License
This is a legal agreement between you, the end-user (“You”), and TTEC and its suppliers. This software, fonts (including their typefaces) and related documentation (“Software”) is licensed for use with the system CPU on which it was installed (“System”) in accordance with the terms contained in this Agreement. This Software is proprietary to TTEC and/or its suppliers.
TTEC and its suppliers disclaim responsibility for the installation and/or use of this Software, and for the results obtained by using this Software. You may use one copy of the Software as installed on a single System, and may not copy the Software for any reason except as necessary to use the Software on a single System. Any copies of the Software shall be subject to the conditions of this Agreement.
You may not, nor cause or permit any third party to, modify, adapt, merge, translate, reverse compile, reverse assemble, or reverse engineer the Software. You may not use the Software, except in accordance with this license. No title to the intellectual property in the Software is transferred to you and full ownership is retained by TTEC or its suppliers. Source code of the
Software is not licensed to you. You will be held legally responsible for any copyright infringement, unauthorized transfer, reproduction or use of the Software or its documentation.
Term
This license is effective until terminated by TTEC or upon your failure to comply with any term of this Agreement. Upon termination, you agree to destroy all copies of the Software and its documentation.
You may terminate this license at any time by destroying the Software and its documentation and all copies.
Disclaimer of Warranty
THIS SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NON-
INFRINGEMENT. TTEC AND ITS SUPPLIERS DISCLAIM ANY WARRANTY RELATING TO
THE QUALITY AND PERFORMANCE OF THE SOFTWARE. IF THE SOFTWARE PROVES
DEFECTIVE, YOU (AND NOT TTEC OR ITS SUPPLIERS) SHALL BE RESPONSIBLE FOR
THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. TTEC
AND ITS SUPPLIERS DO NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE
SOFTWARE WILL MEET YOUR REQUIREMENTS OR THAT THE OPERATION OF THE
SOFTWARE WILL BE UNINTERRUPTED OR ERROR FREE.
6 SOFTWARE LICENSE AGREEMENT
ALL INFORMATION CONTAINED HEREIN THAT IS PROVIDED BY TTEC AND ITS AFFILI-
ATES PURSUANT TO A EULA IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED.
Limitation of Liability
IN NO EVENT WILL TTEC OR ITS SUPPLIERS BE LIABLE TO YOU FOR ANY DAMAGES,
WHETHER IN CONTRACT, TORT, OR OTHERWISE (EXCEPT PERSONAL INJURY OR
DEATH RESULTING FROM NEGLIGENCE ON THE PART OF TTEC OR ITS SUPPLIERS),
INCLUDING WITHOUT LIMITATION ANY LOST PROFITS, LOST DATA, LOST SAVINGS OR
OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE SOFTWARE, EVEN IF TTEC OR ITS SUPPLIERS HAVE
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, NOR FOR THIRD PARTY
CLAIMS.
U.S. Government Restricted Rights
The Software is provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the
U.S. Government is subject to restrictions set forth in subdivision (b) (3) (ii) or (c) (i) (ii) of the
Rights in Technical Data and Computer Software Clause set forth in 252.227-7013, or 52.227-19
(c) (2) of the DOD FAR, as appropriate. Contractor/Manufacturer is TOSHIBA TEC Corporation,
6-78, Minami-cho, Mishima-shi, Shizuoka-ken, 411-8520, Japan.
General
You may not sublicense, lease, rent, assign or transfer this license or the Software. Any attempt to sublicense, lease, rent, assign or transfer any of the rights, duties or obligations hereunder is void. You agree that you do not intend to, and will not ship, transmit (directly or indirectly) the
Software, including any copies of the Software, or any technical data contained in the Software or its media, or any direct product thereof, to any country or destination prohibited by the United
States Government. This license shall be governed by the laws of Japan or, at the election of a
Supplier of TTEC concerned with a dispute arising from or relating to this Agreement, the laws of the Country designated from time to time by the relevant Supplier of TTEC. If any provision or portion of this Agreement shall be found to be illegal, invalid or unenforceable, the remaining provisions or portions shall remain in full force and effect.
YOU ACKNOWLEDGE THAT YOU HAVE READ THIS LICENSE AGREEMENT AND THAT
YOU UNDERSTAND ITS PROVISIONS. YOU AGREE TO BE BOUND BY ITS TERMS AND
CONDITIONS. YOU FURTHER AGREE THAT THIS LICENSE AGREEMENT CONTAINS THE
COMPLETE AND EXCLUSIVE AGREEMENT BETWEEN YOU AND TTEC AND ITS SUPPLI-
ERS AND SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN,
OR ANY OTHER COMMUNICATION RELATING TO THE SUBJECT MATTER OF THIS
LICENSE AGREEMENT.
TOSHIBA TEC Corporation, 6-78, Minami-cho, Mishima-shi, Shizuoka-ken, 411-8520, Japan.
SOFTWARE LICENSE AGREEMENT 7
1 SOFTWARE LICENSE AGREEMENT
SECURITY PRECAUTIONS
In order to make correct use of this products security function, first read the following precautions carefully.
To Administrators y If a physical security problem such as hardware removal or inappropriate disassembly should occur at the installation site, take the appropriate physical security measures such as checking who enters and leaves the site.
y When connecting this product with an outer network such as the Internet, only operate it in a network environment protected by a firewall, etc. to prevent information from being leaked due to incorrect settings or avoid illegal access by unauthorized users.
y To prevent the configuration settings from being changed illegally or similar, change the initial administrator password at the time of shipping before you use this product. Also, the administrator password should be altered periodically.
y In order to make proper use of the network function and user management function, be sure to read the Network Administration Guide and User Management Guide, set the given function and explain the instructions to general users as well. y Always check if the network function and user management function are enabled in order to maintain the security. Should you happen to come across any abnormality, contact your service technician immediately. See the Network Administration Guide and User Management
Guide for the checking method.
8 SECURITY PRECAUTIONS
TRADEMARKS AND COPYRIGHT
Trademarks
y The official name of Windows 98 is Microsoft Windows 98 Operating System.
y The official name of Windows Me is Microsoft Windows Me Operating System.
y The official name of Windows NT is Microsoft Windows NT Operating System.
y The official name of Windows 2000 is Microsoft Windows 2000 Operating System.
y The official name of Windows XP is Microsoft Windows XP Operating System.
y The official name of Windows Vista is Microsoft Windows Vista Operating System.
y The official name of Windows Server 2003 is Microsoft Windows Server 2003 Operating
System.
y Microsoft, Windows, Windows NT, and the brand names and product names of other
Microsoft products are trademarks of Microsoft Corporation in the US and other countries.
y Apple, AppleTalk, Macintosh, Mac, TrueType, and LaserWriter are trademarks of Apple Inc. in the US and other countries.
y PostScript is a trademark of Adobe Systems Incorporated.
y Netscape is a trademark of Netscape Communications Corporation.
y IBM, AT and AIX are trademarks of International Business Machines Corporation.
y NOVELL, NetWare, and NDS are trademarks of Novell, Inc.
y TopAccess is a trademark of Toshiba Tec Corporation.
y Other company names and product names in this manual are the trademarks of their respective companies.
Copyright
© 2007 TOSHIBA TEC CORPORATION All rights reserved
Under the copyright laws, this manual cannot be reproduced in any form without prior written permission of TTEC. No patent liability is assumed, however, with respect to the use of the information contained herein.
TRADEMARKS AND COPYRIGHT 9
2.
INTRODUCTION
ITEMS INCLUDED WITH THE PRODUCT ..............................................................12
ABOUT OPTIONAL EXPANSION KITS ..................................................................13
2 INTRODUCTION
ITEMS INCLUDED WITH THE PRODUCT
TOSHIBA Multifunctional Digital Systems or Multifunctional Digital Color Systems comes with the following items.
Please make sure you have all the following items.
y OPERATOR’S MANUALS
QUICK START GUIDE
OPERATOR’S MANUAL FOR BASIC FUNCTIONS
USER FUNCTIONS GUIDE
COLOR GUIDE (only for the color model)
For more details about the Manuals, please see the following section.
y CD-ROM (2 disk)
Client Utilities CD-ROM
User Documentation CD-ROM
For more details about the CD-ROMs, please see the following section.
12 ITEMS INCLUDED WITH THE PRODUCT
ABOUT OPTIONAL EXPANSION KITS
For e-STUDIO352/452, e-STUDIO353/453, e-STUDIO202L/232/282, e-STUDIO203L/233/283, e-STUDIO520/600/720/850 and e-STUDIO523/603/723/853, there are three optional expansion kits to enable the printing functions and scanning functions on the equipment.
y Printer Kit
The Printer Kit enables the printing functions on this equipment. Whether or not to print using the printer driver supporting XPS and depending on the model, the Printer Kit to use varies, as shown in the table below.
Model Name e-STUDIO352/452 e-STUDIO353/453
Kit No. (Supporting XPS) Kit No. (Not Supporting XPS)
GM-1061 *
GM-1061 *
GM-1060
– e-STUDIO202L/203L e-STUDIO232/282
GM-1081U *
GM-1071 * e-STUDIO233/283 GM-1071 * e-STUDIO520/600/700/850 GM-1051 *
GM-1080U
GM-1070
–
GM-1050 e-STUDIO523/603/723/853 GM-1051 * –
* In order to use printing the printer driver supporting XPS, it is necessary to equip the memory
(GC-1230).
The Printer Kit comes with the following items.
Dongle Font CD-ROM
Dongle Cover Screws x 2
ABOUT OPTIONAL EXPANSION KITS 13
2 INTRODUCTION y Scanner Kit
The Scanner Kit enables the scanning functions on this equipment. Depending on the model, the Scanner Kit to use varies, as shown in the table below.
Model Name e-STUDIO352/452
Kit No.
e-STUDIO353/453 e-STUDIO232/282 e-STUDIO233/283 e-STUDIO520/600/720/850
GM-4060
GM-4060
GM-4070
GM-4070
GM-4010 e-STUDIO523/603/723/853 GM-4010
The Scanner Kit comes with the following items.
Dongle
Dongle Cover Screws x 2 y Printer/Scanner Kit
The Printer/Scanner Kit enables both printing and scanning functions on this equipment.
Whether or not to print using the printer driver supporting XPS and depending on the model, the Printer/Scanner Kit to use varies, as shown in the table below.
Model Name Kit No. (Supporting XPS) Kit No. (Not Supporting XPS) e-STUDIO352/452 e-STUDIO353/453 e-STUDIO202L/203L
GM-2061 *
GM-2061 *
GM-2081U * e-STUDIO232/282 e-STUDIO233/283
GM-2071 *
GM-2071 * e-STUDIO520/600/700/850 GM-2041 *
GM-2060
–
GM-2080U
GM-2070
–
GM-2040 e-STUDIO523/603/723/853 GM-2041 * –
* In order to use printing the printer driver supporting XPS, it is necessary to equip the memory
(GC-1230).
14 ABOUT OPTIONAL EXPANSION KITS
The Printer/Scanner Kit comes with the following items.
Dongle Font CD-ROM
Dongle Cover Screws x 2 y Memory Kit (GC-1230)
The Memory Kit enables the XPS printing functions.
ABOUT OPTIONAL EXPANSION KITS 15
2 INTRODUCTION
LINEUP OF OUR MANUALS
Thank you for purchasing the TOSHIBA Multifunctional Digital Systems or Multifunctional Digital
Color Systems.
We have provided you with these manuals for the operation of this equipment. Select and read the manual best suited to your needs.
Quick Start Guide
This Quick Start Guide describes the initial setup method of this equipment and accessories of this product such as operator’s manuals and
CD-ROMs.
Operator’s Manual for Basic Functions
This Operator’s Manual for Basic Functions describes how to use the basic functions of this equipment mainly focusing on the copying function.
Also this manual contains safety precautions for users to be observed.
Be sure to read it first carefully.
User Functions Guide
This User Functions Guide describes the functions and settings under the [USER FUNCTIONS] button on the control panel of this equipment.
Color Guide (only for the color model)
This color Guide simply explains the functions such as “copy density adjustment”, “color adjustment”, “copy editing”, "image editing” and
“image processing” in color. This guide also includes the basic knowledge of color.
Other guides are provided by the User Documentation CD-ROM in PDF files:
TopAccess Guide
This TopAccess Guide explains how to operate and set up the network functions such as the network scanning function and job management, using the TopAccess (Web-based utility) from client computers.
16 LINEUP OF OUR MANUALS
Network Administration Guide
This Network Administration Guide explains the guidelines for setting up network servers to provide various network services, and troubleshooting for network administrators.
Printing Guide
This Printing Guide explains how to install the client software for printing from Microsoft Windows, Apple Mac OS, and UNIX computers, and print to the equipment.
Scanning Guide
This Scanning Guide explains how to operate the scanning function of this equipment.
e-Filing Guide
This e-Filing Guide explains how to operate the e-Filing function using the TWAIN driver, File Downloader and e-Filing web utility.
Network Fax Guide
This Network Fax Guide explains how to use the network fax function that enable users to operate fax and internet fax sending from a client computer via network.
LINEUP OF OUR MANUALS 17
2 INTRODUCTION
User Management Guide
This User Management Guide describes how to manage this equipment using the functions of “Department Management”, “User Management
Setting” and “User Authentication for Scan to E-mail”.
To read manuals in PDF (Portable Document Format) files
Viewing and printing this operator's manual in PDF files require that you install Adobe Reader or
Adobe Acrobat Reader on your PC. If Adobe Reader or Adobe Acrobat Reader is not installed on your PC, download and install it from the website of Adobe Systems Incorporated.
black and white model color model e-STUDIO202L/232/282 e-STUDIO203L/233/283 e-STUDIO352/452 e-STUDIO353/453 e-STUDIO520/600/720/850 e-STUDIO523/603/723/853 e-STUDIO281c/351c/451c
18 LINEUP OF OUR MANUALS
ABOUT THE CD-ROM
There is a Client Utilities CD-ROM comes with the product: y Client Utilities CD-ROM
In the Client Utilities CD-ROM, the following client software can be installed:
For Windows
- PCL6 Printer Driver
- PCL5c Printer Driver (only for the color model)
- PSL3 Printer Driver
- TWAIN Driver
- File Downloader
- N/W-Fax Driver
- Address Book Viewer
- Remote Scan driver
For Macintosh
- PPD file for Mac OS 8.6, 9.x, and OS X 10.1/10.2 (Classic)
- PPD file for Mac OS X 10.2.4 to Mac OS X 10.4.x
For Admin’s Client
- TOSHIBA NDPS Gateway
- e-Filing Backup/Restore Utility
- UNIX Filters (for Solaris, HP-UX, IBM AIX, Linux, and OpenUNIX)
- MIB
- CUPS y Font CD-ROM (only for the black and white model)
In the Font CD-ROM, the following client software can be installed:
- Font Manager
For more details about the client software in the CD-ROMs, please see the following section.
P.20 “ABOUT THE CLIENT SOFTWARE”
ABOUT THE CD-ROM 19
2 INTRODUCTION
ABOUT THE CLIENT SOFTWARE
The Multifunctional Digital Systems or Multifunctional Digital Color Systems provides the following client software to perform printing, scanning, and network managing systems:
Client Software for Printing Features
For e-STUDIO352/452, e-STUDIO353/453, e-STUDIO202L/232/282, e-STUDIO203L/233/283, e-STUDIO520/600/720/850 and e-STUDIO523/603/723/853, the Client Software for printing features are available only when the Printer Kit or Printer/Scanner Kit is installed.
y PCL6 Printer Driver
This printer driver is used for printing gray scale documents that use TrueType fonts, such as a Microsoft Word, from the Windows computers.
y PCL5c Printer Driver (only for the color model)
This printer driver is used for printing color documents that use TrueType fonts, such as a
Microsoft Word, from the Windows computers.
y PSL3 Printer Driver
This printer driver is used for printing high-graphical-content documents that use PostScript fonts and graphics, such as Adobe PageMaker, from the Windows computers.
y XPS Printer Driver (only for the black and white model)
This printer driver is used for printing documents from applications developed exclusively for-
Windows Vista, such as Windows Presentation Foundation (WPF). The optional memory
(GC-1230) is required to install.
y Font Manager
Font Manager allows users to manage the TrueType fonts on the Windows computers.
y TOSHIBA NDPS Gateway
TOSHIBA NDPS Gateway, provided in the Client Utilities CD-ROM, enable to configure the
NDPS objects in servers running NetWare 5.1 with service pack 3A (3.0.1) or higher or Net-
Ware 6.0/6.5.
y Macintosh PPD Files
There are two PPD files provided in the Client Utilities CD-ROM: one is for Mac OS 8.6/9.x and OS X 10.1/10.2 (Classic), and the other one is for Mac OS X 10.2.4 to Mac OS X 10.4.x.
These PPD files allow users to print from the Macintosh computers over the TCP/IP or
AppleTalk network.
y UNIX Filters
UNIX filters, provided in the Client Utilities CD-ROM, enable users to print from the UNIX workstation using the lp command over the TCP/IP network.
y CUPS
The Client Utilities CD-ROM includes the CUPS files that enable the CUPS print system on the UNIX workstation.
Further details about the above client software are described in the Printing Guide.
Client Software for Scan Features
y Remote Scan driver
Remote Scan driver, provided in the Client Utilities CD-ROM, enable users to scan originals remotely and retrieve scanned images into the TWAIN-compliant application via a TCP/IP network.
20 ABOUT THE CLIENT SOFTWARE
Further details about the above client software are described in the Scanning Guide.
Client Software for e-Filing Features
y TWAIN Driver
TWAIN Driver, provided in the Client Utilities CD-ROM, enable users to acquire documents that are stored in e-Filing into the TWAIN-compliant application as an image via a TCP/IP network.
y File Downloader
File Downloader, provided in the Client Utilities CD-ROM, enable users to acquire documents that are stored in e-Filing into the computer as a file via a TCP/IP network.
y e-Filing web utility
Using the e-Filing web utility, an embedded web-based utility, allows users to create boxes and folders, and move and delete documents in e-Filing. Users can also create a new document in e-Filing by merging the several documents.
y e-Filing Backup/Restore Utility
The e-Filing Backup/Restore Utility, provided in the Client Utilities CD-ROM, can backup/ restore the e-Filing data from/to the equipment.
Further details about the above client software are described in the e-Filing Guide.
Client Software for Network Management
y TopAccess
TopAccess, embedded web-based utility, allows users to view the device information, monitor and manage jobs, and create templates and manage address book, etc. It also provides the administrator’s functions to set up and maintain the device.
Further details about the functions of TopAccess are described in the TopAccess Guide.
Client Software for Network Fax Features
y N/W-Fax Driver
The N/W-Fax driver enables you to set up send lists and send electronic documents as faxes or internet faxes from your PC to one or more destinations.
y Address Book Viewer
With the Address Book Viewer you can effortlessly add or modify fax recipient names, fax numbers, and Internet Fax address (e-mail address) to the Address Book. This utility allows you to manage recipients of the fax, select and view fax recipients from the Address Book, as well as recipient fax numbers and other contact information.
Further details about the above client software are described in the Network Fax Guide.
ABOUT THE CLIENT SOFTWARE 21
3.
SYSTEM REQUIREMENTS
3 SYSTEM REQUIREMENTS
SYSTEM REQUIREMENTS
This equipment supports various features under following environments. The features available for users vary according to the environment. The following section describes the required environment for each feature.
The Copier functions of this equipment does not require special environment. Once you power on the machine, you can use the copier functions.
General Requirements
This equipment requires following cables to connect with your computers.
y Connector Cable
For USB Connection: USB 1.1 compatible cable
For Ethernet Connection: 10BASE-T/100BASE-TX STP cable with a Category 5 RJ-45 connector y A cross cable is not supported because of its instability.
y The scanning feature is unavailable during USB connection.
y This equipment can be connected with your computer in the Parallel connection when the optional Parallel Interface is installed. In that case, please use the IEEE1284 printer cable that comes with the optional Parallel Interface.* y This equipment supports the USB and 10BASE/100BASE-TX connections or the Parallel and 10BASE/100BASE-TX connections at the same time; however, it does not support those three types of connection at the same time.*
* It is only applicable for e-STUDIO520/600/720/850, e-STUDIO523/603/723/853 and e-STUDIO
281c/351c/451c.
y TopAccess Web-base management utility
Network Protocol: TCP/IP (IPv4/IPv6)
Browser for Windows: Microsoft Internet Explorer 5.5 Service Pack 2 or later (IPv4)
Microsoft Internet Explorer 7.0 or later (IPv6)
Browser for Macintosh:
Browser for UNIX:
Firefox 1.5.0.4 or later
Firefox 1.5.0.4 or later
Safari 2.0
Firefox 1.5.0.4 or later
Printing Features
This equipment requires following environment for printing functions.
For e-STUDIO352/452, e-STUDIO353/453, e-STUDIO202L/232/282, e-STUDIO203L/233/283, e-STUDIO520/600/720/850 and e-STUDIO523/603/723/853, the printing features are available only when the Printer Kit or Printer and Scanner Kit is installed.
y Printing from Windows Platform
Display Resolution: 1024 x 768 dots or more
Display Color:
CPU:
High Color (16bit) or higher is recommended
Pentium 133 MHz minimum
Memory:
OS:
(Pentium 266 MHz or faster recommended)
The required memory size for OS.
Windows 98 Operating System, English Version
24 SYSTEM REQUIREMENTS
Windows Me Operating System, English Version
Windows NT Workstation Operating System 4.0, English Version
Windows NT Server Network Operating System 4.0, English Version
Windows 2000 Professional Operating System, English Version
Windows 2000 Server Operating System, English Version
Windows XP Home Edition Operating System, English Version
Windows XP Professional Operating System, English Version
Windows Vista Operating System, English Version
Connectability:
Windows Server 2003 Operating System, English Version
USB 1.1, Ethernet, Parallel* (optional)
Network Protocol: TCP/IP (IPv4/IPv6), IPX/SPX
Printing Protocol: SMB, Raw TCP, LPR/LPD, IPP v1.1
NetWare PSERVER with NDS or Bindery
NetWare Print Server (if printing with the NetWare file server)
NetWare 5.1/6.0/6.5
* It is only applicable for e-STUDIO520/600/720/85 and e-STUDIO 281c/351c/451c.
y USB printing for Windows 98 will be not supported after 2005.
y USB printing is not supported by Windows NT4.0 and Windows 98.
y Printing from Macintosh Platform
Display Resolution: 1024 x 768 dots or more
OS: Mac OS 8.6, Mac OS 9.x, Mac OS X 10.1/10.2 (Classic)
Connectability:
Mac OS X 10.2.4 to Mac OS X 10.4.x
Ethernet
Network Protocol: TCP/IP (IPv4/IPv6), AppleTalk, Bonjour
Printing Protocol: AppleTalk, LPR/LPD, IPP, Bonjour
Printer Driver: LaserWriter 8 *
* Only required for Mac OS 8.6/9.x and Mac OS X 10.1/10.2 Classic
USB printing is not supported by Macintosh.
y Printing from UNIX Platform
OS: Sun Solaris v2.6/2.7/7.8/8/9
HP-UX ver.10.20/11.x
IBM AIX 4.3.3
SCO UNIXWare 7
SCO OpenUNIX 8
Red Hat Linux 7.x/8.0/9.x
Red Hat Linux Enterprise WS2
Connectability:
SuSE Linux ver.7.x/8.x/9.x
Mandrake Linux ver.7.x/8.x/9.x
Turbo Linux 8/10
Ethernet
Network Protocol: TCP/IP (IPv4/IPv6)
Printing Protocol: LPR/LPD
SYSTEM REQUIREMENTS 25
3 SYSTEM REQUIREMENTS
Scanning Features
This equipment requires following environment for scan functions.
The scanning features are available only when the Scanner Upgrade Kit or Printer/Scanner Kit is installed.
y General Requirements
Connectability: Ethernet
Network Protocol: TCP/IP (IPv4/IPv6), SMB, FTP, IPX/SPX
Network Server: Windows File Server (for Scan to File over SMB)
FTP Server (for Scan to File over FTP)
NetWare File Server (for Scan to File over IPX/SPX)
SMTP Server (for Scan to E-mail) y Remote Scan driver
OS: Windows 2000 Professional Operating System, English Version
Windows 2000 Server Operating System, English Version
Windows XP Home Edition Operating System, English Version
Windows XP Professional Operating System, English Version
Windows Vista Operating System, English Version
Connectability:
Windows Server 2003 Operating System, English Version
Ethernet
Network Protocol: TCP/IP (IPv4/IPv6)
Fax/Internet Fax Features
This equipment requires following environment for fax functions.
The Fax functions over the public switched telephone network require the optional Fax unit installed.
y Fax Transmission
Connectability: Public Switched Telephone Network (PSTN) y Internet Fax Transmission
Connectability: Ethernet
Network Protocol: TCP/IP (IPv4/IPv6)
Network Server: POP3 Server (for receiving Internet Fax)
SMTP Server (for transmitting Internet Fax) y N/W-Fax/Address Book Viewer
Display Resolution: 1024 x 768 dots or more
Display Color: High Color (16bit) or higher is recommended
CPU: Pentium 133 MHz minimum
(Pentium 266 MHz or faster recommended)
Memory:
OS:
The required memory size for OS.
Windows 98 Operating System, English Version
Windows Me Operating System, English Version
Windows NT Workstation Operating System 4.0, English Version
Windows NT Server Network Operating System 4.0, English Version
Windows 2000 Professional Operating System, English Version
Windows 2000 Server Operating System, English Version
26 SYSTEM REQUIREMENTS
Windows XP Home Edition Operating System, English Version
Windows XP Professional Operating System, English Version
Windows Vista Operating System, English Version
Windows Server 2003 Operating System, English Version
Connectability: USB 1.1, Ethernet, Parallel* (optional)
Network Protocol: TCP/IP (IPv4/IPv6), IPX/SPX
Printing Protocol: SMB, Raw TCP, LPR/LPD, IPP v1.1
NetWare PSERVER with NDS or Bindery
* It is only applicable for e-STUDIO520/600/720/850, e-STUDIO523/603/723/853 and e-STUDIO
281c/351c/451c.
Electronic Filing (e-Filing) Features
This equipment requires following environment for e-Filing functions.
y e-Filing Web utility
Network Protocol: TCP/IP (IPv4/IPv6)
Browser: Microsoft Internet Explorer 5.5 Service Pack 2 or later (Only for Windows: IPv4)
Microsoft Internet Explorer 7.0 or later (Only for Windows: IPv6)
Firefox 1.5.0.4 or later (Only for Windows) y TWAIN Driver and File Downloader
Display Resolution: 1024 x 768 dots or more
Display Color:
CPU:
High Color (16bit) or higher is recommended
Pentium 133 MHz minimum
Memory:
OS:
(Pentium 266 MHz or faster recommended)
256 MB
Windows 98 Operating System, English Version
Windows Me Operating System, English Version
Windows NT Workstation Operating System 4.0, English Version
Windows NT Server Network Operating System 4.0, English Version
Windows 2000 Professional Operating System, English Version
Windows 2000 Server Operating System, English Version
Windows XP Home Edition Operating System, English Version
Windows XP Professional Operating System, English Version
Windows Vista Operating System, English Version
Windows Server 2003 Operating System, English Version
Connectability: Ethernet
Network Protocol: TCP/IP (IPv4/IPv6) y e-Filing Backup/Restore Utility
Display Resolution: 1024 x 768 dots or more
Display Color: High Color (16bit) or higher is recommended
CPU: Pentium 133 MHz minimum
(Pentium 266 MHz or faster recommended)
Memory:
OS:
256 MB
Windows 2000 Professional Operating System, English Version
Windows 2000 Server Operating System, English Version
Windows XP Home Edition Operating System, English Version
Windows XP Professional Operating System, English Version
Windows Vista Operating System, English Version
Connectability:
Windows Server 2003 Operating System, English Version
Ethernet
Network Protocol: TCP/IP (IPv4/IPv6)
SYSTEM REQUIREMENTS 27
4.
CONNECTING TO THE DEVICE
CONNECTING TO THE NETWORK ........................................................................31
4 CONNECTING TO THE DEVICE
CONNECTING TO THE USB PORT
The following describes how to connect this equipment to a computer using a USB1.1 compatible cable. The following image is for the e-STUDIO352/452. It may be slightly different with your system.
The USB cable is an optional item. Please obtain one that is compatible with your computer.
1 Insert the USB cable all the way to the deep end of the USB interface connector located on the rear side of the machine body.
2 Connect the other end of the USB cable to the USB port of your computer.
3 Turn ON the power of this equipment and the power of the computer.
30 CONNECTING TO THE USB PORT
CONNECTING TO THE NETWORK
The following describes how to connect this equipment to a network. The following image is for the e-STUDIO352/452. It may be slightly different with your system.
The 10BASE-T or 100BASE-TX cable is an optional item. Please obtain one that is compatible with your network.
1 Insert the 10BASE-T or 100BASE-TX cable to the network interface connector located on the rear side of the machine body.
2 Turn ON the power of this equipment.
CONNECTING TO THE NETWORK 31
5.
SETUP FLOW
SETUP FLOW FOR USER MANAGEMENT............................................................41
SETUP FLOW FOR PRINTING FEATURES ...........................................................44
SETUP FLOW FOR SCANNING FEATURES .........................................................69
SETUP FLOW FOR FAX FEATURES......................................................................75
SETUP FLOW FOR E-FILING FEATURE................................................................85
5 SETUP FLOW
OVERVIEW OF CONNECTIONS
Connecting Environment
This equipment supports the various features of electric document processing service in direct connection with printer cable or USB cable, and in network connection such as printing, scanning, and sending E-mail or internet fax over the Internet. To enable these features, an administrator has to configure the proper network configuration with client computers, servers, and this equipment.
Following diagram describes the connectable configurations of this equipment.
Parallel or USB Connection
* USB Connection is not available
Windows NT4.0 and Windows 98.
TCP/IP or IPX/SPX Local Area Network
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Vista
Windows Server 2003
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Vista
Unix workstation
Windows Server 2003
Windows Print Server
NetWare Print Server
AppleTalk or TCP/IP Local Area Network
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Vista
Windows Server 2003
Mac OS 8.6
Mac OS 9.x
Mac OS X
Internet
DNS Server
Email Server
* The above image is for the e-STUDIO352/452. It may be slightly different with your system.
For more information about each connection, please refer to the following sections:
P.35 “Available Features Under Each Connection”
“IPv4” and “IPv6” are available for the TCP/IP protocol.
34 OVERVIEW OF CONNECTIONS
Available Features Under Each Connection
The features available vary depending on the connected configuration. This section describes the features available for each connection.
The following connections can be used together. For example, it can directly connect to your computer with a USB cable, and it can also connect to the local area network over TCP/IP. In this case, all features described for each connection will be available for users.
y For e-STUDIO352/452, e-STUDIO353/453, e-STUDIO202L/232/282, e-STUDIO203L/233/
283, e-STUDIO520/600/720/850 and e-STUDIO523/603/723/853, the printing features are available only when the Printer Kit or Printer/Scanner Kit is installed.
y For e-STUDIO352/452, e-STUDIO353/453, e-STUDIO202L/232/282, e-STUDIO203L/233/
283, e-STUDIO520/600/720/850 and e-STUDIO523/603/723/853, the scanning features are available only when the Scanner Kit or Printer/Scanner Kit is installed.
General Features Available for Any Connection
The following features are available in spite of the connection.
y General Copying Features y Copy to e-Filing Features y Scan to e-Filing Features y Fax Transmission/Reception
The fax transmission is available only when the optional Fax unit is installed. It needs any extensional configuration with client computers, servers, or network, but it must be connected to the
Public Switched Telephone Network. For more information about fax features, please refer to the Operator’s Manual for Facsimile Functions.
USB Connection
The following features are available when this equipment is directly connected to your computer with a USB cable.
Printing Features y USB Printing from Windows computers
USB Printing is not available for Windows NT4.0 and Windows 98.
OVERVIEW OF CONNECTIONS 35
5 SETUP FLOW
Local Area Network Connection over TCP/IP
The following features are available when this equipment is connected to the local area network over TCP/IP where Windows computers, Macintosh computers or UNIX workstations are connected.
Printing Features y SMB Printing from Windows computers y Raw TCP or LPR Printing from Windows computers y IPP Printing from Windows computers y Novell Printing from Windows computers through the NetWare 5.1/6.0/6.5 in NDS or NDPS mode y LPR Printing from Macintosh computers y Bonjour Printing from Macintosh computers y LPR Printing from UNIX workstations y FTP Printing
Scanning Features y Scan to File (SMB) y Scan to File (FTP)
Fax Features y Sending faxes from Windows computers using N/W-Fax driver (Optional Fax unit required.) y Searching address book in the LDAP server e-Filing Features y Managing and editing files in the e-Filing using e-Filing Web utility y Retrieving Images from the e-Filing with TWAIN Driver or File Downloader
Network Management Features y Monitoring and managing this equipment using TopAccess
Local Area Network Connection over IPX/SPX
The following features are available when this equipment is connected to the local area network over IPX/SPX where Windows computers and NetWare file servers are connected.
Printing Features y Novell Printing from Windows computers through the NetWare 5.1/6.0/6.5 in NDPS mode y Novell Printing from Windows computers through the NetWare 5.1/6.0/6.5 in NDS mode y Novell Printing from Windows computers through the NetWare 5.1/6.0/6.5 in Bindery mode
Scanning Features y Scan to File (IPX/SPX)
36 OVERVIEW OF CONNECTIONS
Internet Connection
The following features are available when this equipment is connected to the network where client workstations can access to the Internet.
Printing Features y IPP Printing from Windows computers over the Internet y E-mail Printing using the E-mail client application over the Internet
Scanning Features y Scan to E-mail
Fax/Internet Fax Features y Internet Fax Transmission/Reception y Internet Fax transmission from Windows computers using the N/W-Fax driver y Onramp Gateway transmission (Optional Fax unit required.) y Offramp Gateway transmission (Optional Fax unit required.)
OVERVIEW OF CONNECTIONS 37
5 SETUP FLOW
ABOUT SETUP
Initial Device Setup
First of all, you must set up how this equipment is managed and works as copier, printer, scanner, and facsimile. This equipment can be used with the default settings, but some must be configured for this equipment works properly.
Setup the Network Document Processing System
This equipment is the Network-Ready MFP that can be used immediately after you connect to your network.
However, it is recommended to read following sections to make sure you choose right environments and efficient settings for each features on this equipment even if you connect the machine to the above environments. Also some features require configuring the settings to suit your environments.
This equipment may provide advanced document processing system in your place, if you add little more environments in your place.
The references below are described easy-setup flow to enable each advanced document processing features:
Setup Flow for Printing Environments
P.44 “Setup Flow for Microsoft Windows Workstation”
P.56 “Setup Flow for Macintosh Workstation”
P.62 “Setup Flow for UNIX Workstation”
P.65 “Setup Flow for FTP Printing”
P.67 “Setup Flow for E-mail Printing”
Setup Flow for Scanning Environments
P.69 “Setup Flow for Scan to File”
P.71 “Setup Flow for Scan to E-mail”
Setup Flow for Fax/Internet Fax Environments
P.75 “Setup Flow for Network-Fax”
P.77 “Setup Flow for Internet Fax”
P.80 “Setup Flow for Onramp Gateway” (Optional Fax unit required)
P.82 “Setup Flow for Offramp Gateway” (Optional Fax unit required)
Setup Flow for e-Filing Environments
P.85 “Setup Flow for e-Filing Web Utility”
P.86 “Setup Flow for e-Filing Client Software”
Setup Flow for TopAccess, Web-based Network Management Utility
P.40 “SETUP FLOW FOR TopAccess”
38 ABOUT SETUP
INITIAL DEVICE SETUP
Before starting to use this equipment as a copier, printer, scanner, and facsimile, it is recommended to configure the general device settings on this equipment.
Following table shows the minimum setup required after you power on this equipment at the first time.
Setup Flow Description/Reference
Setting the Department
Code
When you want to manage the counters separately by the department code, you must register and enable the department code.
Reference: USER FUNCTIONS GUIDE y Chapter 2 “MANAGING COUNTERS”
“4. MANAGING DEPARTMENT CODE”
Setting the Paper Size for
Each Drawer
Specify the paper sizes that are set on each drawer.
Reference: USER FUNCTIONS GUIDE y Chapter 3 “SETTING ITEMS (USER)”
“7. SETTING DRAWER”
Setting the Device Information
Specify the device information.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “2. SETTING GENERAL FUNCTIONS”
“Setting the Device Information”
Setting the Administrator
Password
As a default, the administrator password has been set as “123456”. It is recommended to change the administrator password to secure the administrator’s function menus.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “2. SETTING GENERAL FUNCTIONS”
“Setting the Administrator Password”
Setting the Terminal ID If the optional Fax unit is installed, specify the terminal ID to identify the fax terminal information.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “5. SETTING FAX FUNCTIONS”
“Setting the Terminal ID”
INITIAL DEVICE SETUP 39
5 SETUP FLOW
SETUP FLOW FOR TopAccess
Users and an administrator can remotely manage the equipment using TopAccess, web-based utility.
Once TopAccess is enabled, users can view the device information, and manage their jobs remotely from the computer using the web browser. Also TopAccess allows users to register the address book and templates using TopAccess.
Using an administrator’s functions of TopAccess, an administrator can set up and maintain the equipment remotely.
To enable TopAccess, an administrator should set up the network connection between computers and this equipment over TCP/IP, and enable the HTTP network service.
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the TCP/IP”
Set up the IPv6 Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the IPv6”
Set up the HTTP Network
Service
Enable the HTTP Network Server.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the HTTP Network Service”
40 SETUP FLOW FOR TopAccess
SETUP FLOW FOR USER MANAGEMENT
Setup Flow for Department Management
You can audit the copy quantity of copy, print, scan, and facsimile pages performed by setting a department code. Up to 1000 department codes can be registered.
Setup Flow Description/Reference
Register Department
Code
Before enabling the department management, you must register at least one department code.
Reference: USER FUNCTIONS GUIDE y Chapter 2 “MANAGING COUNTERS (COUNTER MENU)”
Ð “4. MANAGING DEPARTMENT CODE”
“Registering a New Department Code”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Managing Department Code”
“Registering or modifying the Department Code”
Enable Department Management
After you register the department code, enable the department code management.
Reference: USER FUNCTIONS GUIDE y Chapter 2 “MANAGING COUNTERS (COUNTER MENU)”
Ð “4. MANAGING DEPARTMENT CODE”
“Enabling Department Code”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Device Settings”
“Setting up the Device Information”
SETUP FLOW FOR USER MANAGEMENT 41
5 SETUP FLOW
Setup Flow for User Management Setting
When you want to manage the authentication for each individual user, enable the User Management Setting.
This equipment supports the following methods for the User Management Setting.
y Windows Domain Authentication
When you network manages the network users using the Windows Domain, this equipment can be managed using the Windows Domain Authentication.
When this is configured, users must enter the user name and password that is registered in the Windows Domain to perform the any operations on the Control Panel of this equipment.
y LDAP Authentication
When you network manages the network users using the LDAP, this equipment can be managed using the LDAP Authentication.
When this is configured, users must enter the user name and password that is registered in the LDAP server to perform the any operations on the Control Panel of this equipment.
y MFP Local Authentication
When you do not have any network authentication systems in your network, you can use the
MFP Local Authentication.
When this is configured, users must enter the user name and password that is registered in the MFP to perform the any operations on the Control Panel of this equipment.
Setup Flow Description/Reference
Configure Network
Authentication Service
(Optional)
Make sure that the Network Authentication Service is configured correctly in the network server if you use Windows Domain Authentication or LDAP
Authentication.
If the LDAP authentication is used, some settings will be required in the network server and the equipment. For information about setting up the LDAP authentication, please see the following section.
Reference: Network Administration Guide y Chapter 1 “Setting up Network Server”
“Setting up LDAP Authentication Service”
Enable User Management Setting
Enable the User Management Setting that is suited to your network.
Reference: User Management Guide y Chapter 1 “Setting up User Management”
Ð “Setting up User Management Setting”
“Enabling User Management Setting”
Register User Information After enabling the User Management Setting, register the User Information.
Reference: User Management Guide y Chapter 1 “Setting up User Management”
Ð “Setting up User Management Setting”
“Managing User Information”
42 SETUP FLOW FOR USER MANAGEMENT
Setup Flow for User Authentication for Scan to E-mail
When the User Authentication for Scan to E-mail is enabled, users must enter the user name and password that has the access privilege for the SMTP server before performing Scan to Email.
The User Authentication for Scan to E-mail does not apply for Internet Fax by selecting e-mail addresses in the [FAX] screen.
Setup Flow Description/Reference
Enable User Authentication for Scan to E-mail
Enable the User Authentication for Scan to E-mail.
Reference: User Management Guide y Chapter 1 “Setting up User Management”
“Setting up User Authentication for Scan to E-mail”
SETUP FLOW FOR USER MANAGEMENT 43
5 SETUP FLOW
SETUP FLOW FOR PRINTING FEATURES
Setup Flow for Microsoft Windows Workstation
This equipment supports USB printing, Raw TCP printing, LPR printing, SMB printing, and IPP printing for Windows computers. The required configurations are different for each printing system.
y If the equipment is connected using a USB cable, set up USB printing.
P.45 “Setup Flow for USB Printing”
y If the equipment is connected in the network but you are not sure which printing system you will use, choose the proper printing system according to operating systems of clients in your network:
- For Windows 98/Me: SMB Printing
P.48 “Setup Flow for SMB Printing”
- For Windows NT 4.0, Windows 2000, Windows XP, Windows Vista, Windows Server
2003: Raw TCP or LPR Printing
P.46 “Setup Flow for Raw TCP/LPR Printing”
y The following images are for the e-STUDIO352/452. They may be slightly different with your system.
y It assumes using SMB printing in a small network. If you can use the Windows NT 4.0, Windows 2000, Windows XP, Windows Vista, or Windows Server 2003 as a print server, it is recommended to set up for printing via Windows print server.
P.52 “Setup Flow for Printing via Windows Print Server”
y For e-STUDIO352/452, e-STUDIO353/453, e-STUDIO202L/232/282, e-STUDIO203L/233/
283, e-STUDIO520/600/720/850 and e-STUDIO523/603/723/853, the printing features are available only when the Printer Kit is installed, or when the Printer/Scanner Kit is installed.
44 SETUP FLOW FOR PRINTING FEATURES
Setup Flow for USB Printing
This equipment can be used as printer connected with a USB cable. When it is connected with a
USB cable, it does not require an initial setup. After you connect this equipment and your computer, install the printer drivers and then it provides USB printing features.
USB printing is not available for Windows NT4.0 and Windows 98.
Connecting with USB
Setting up the USB Printer
Connection
Windows 98
Windows Me
Windows 2000
Windows XP
Windows Vista
Windows Server 2003
Setup Flow Description/Reference
Connect this equipment Connect the machine and your computer with a USB or Parallel* cable.
Reference: QUICK START GUIDE y Chapter 4 “CONNECTING TO THE DEVICE”
“1.CONNECTING TO THE USB PORT”
Install the Client Software Install the printer driver from the Client Utilities CD-ROM.
Reference: Printing Guide y Chapter 2 “INSTALLING CLIENT SOFTWARE FOR WINDOWS”
“Installing the Client Software for USB Printing”
Configuring the Printer
Drivers
Configure the options and department code.
Reference: Printing Guide y Chapter 5 “PRINTING FROM WINDOWS”
“Before Using the Printer Driver”
* It is only applicable for e-STUDIO520/600/720/850, e-STUDIO523/603/723/853 and e-STUDIO 281c/
351c/451c.
SETUP FLOW FOR PRINTING FEATURES 45
5 SETUP FLOW
Setup Flow for Raw TCP/LPR Printing
This equipment can be used with Raw TCP or LPR printer connection for Windows NT 4.0, Windows 2000, Windows XP, Windows Vista, and Windows Server 2003. Raw TCP or LPR printing is the common method to setting up the printer from servers.
Connecting over TCP/IP Network
Setting up the Raw TCP or LPR printer connection
Windows NT 4.0
Windows 2000
Windows XP
Windows Vista
Windows Server 2003
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the TCP/IP”
Set up the IPv6 Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the IPv6”
46 SETUP FLOW FOR PRINTING FEATURES
Setup Flow Description/Reference
Set up the Printing Service
If users use Windows 2000, Windows XP, Windows Vista, or Windows
Server 2003 for printing, enable the Raw TCP Printing Service using TopAccess. It is recommended to use Raw TCP printing rather than LPR printing.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Print Service Settings”
“Setting up the Raw TCP Print”
If any users use Windows NT 4.0, enable the LPD Printing Service using
TopAccess.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Print Service Settings”
“Setting up the LPD Print”
Install the Client Software Install the printer driver from the Client Utilities CD-ROM.
Reference: Printing Guide y Chapter 2 “INSTALLING CLIENT SOFTWARE FOR WINDOWS”
“Installing the Client Software for Raw TCP/LPR Printing”
Configuring the Printer
Drivers
Configure the options and department code.
Reference: Printing Guide y Chapter 5 “PRINTING FROM WINDOWS”
“Before Using the Printer Driver”
SETUP FLOW FOR PRINTING FEATURES 47
5 SETUP FLOW
Setup Flow for SMB Printing
This equipment can be used with SMB printer connection that allows you to connect to this equipment using File and Printer Sharing for Microsoft Networks service. SMB printing is the common method to setting up the printer from the Windows 98/Me computers. However, SMB printing is not suitable for printing a large amount of documents.
Network Environment over TCP/IP
Setting up SMB
Printer Connection
Windows 98/Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Vista
Windows Server 2003
Windows 98/Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Vista
Windows Server 2003
Windows 98/Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Vista
Windows Server 2003
It assumes using SMB printing in a small network. If you can use the Windows NT 4.0, Windows
2000, Windows XP, Windows Vista, or Windows Server 2003 as a print server, it is recommended to set up for printing via Windows print server.
P.52 “Setup Flow for Printing via Windows Print Server”
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the TCP/IP”
48 SETUP FLOW FOR PRINTING FEATURES
Setup Flow
Set up the IPv6
Set up the SMB
Description/Reference
Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the IPv6”
Specify the NetBIOS name and Workgroup. If the users have to connect to this equipment from different segment in your network, specify the WINS server settings as well.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the SMB Protocol”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the SMB”
Install the Client Software Install the printer driver from the Client Utilities CD-ROM.
Reference: Printing Guide y Chapter 2 “INSTALLING CLIENT SOFTWARE FOR WINDOWS”
“Installing the Client Software for SMB Printing”
Configuring the Printer
Drivers
Configure the options and department code.
Reference: Printing Guide y Chapter 5 “PRINTING FROM WINDOWS”
“Before Using the Printer Driver”
SETUP FLOW FOR PRINTING FEATURES 49
5 SETUP FLOW
Setup Flow for IPP Printing
This equipment can be used with the IPP printer connection for Windows 2000, Windows XP,
Windows Vista, and Windows Server 2003 in a TCP/IP network. Even though IPP printing can be used in the local area network, this method is commonly used to print over the Internet. If you allow IPP printing through the Internet, you must configure the DNS server to enable users to access this equipment over the Internet using the HTTP protocol.
This is useful when users want to print to this equipment from outside the local area network.
Connecting over Internet
Windows 2000
Windows XP
Windows Vista
Windows Server 2003
Setting up the IPP printer connection
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the TCP/IP”
Set up the IPv6 Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the IPv6”
50 SETUP FLOW FOR PRINTING FEATURES
Setup Flow
Set up the DNS
(Optional)
Set up the Printing Service
Description/Reference
If you want to print from the Internet, configure the DNS settings using
TopAccess to enable accessing to this equipment over the Internet. Also, if the DNS server supports the Dynamic DNS, enable the DDNS as well.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the DNS Session” y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
‘ Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the DDNS Session”
Enable the IPP Printing Service using TopAccess.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Print Service Settings”
“Setting up the IPP Print”
Install the Client Software Install the printer driver from the Client Utilities CD-ROM.
Reference: Printing Guide y Chapter 2 “INSTALLING CLIENT SOFTWARE FOR WINDOWS”
“Installing the Client Software for IPP Printing”
Configuring the Printer
Drivers
Configure the options and department code.
Reference: Printing Guide y Chapter 5 “PRINTING FROM WINDOWS”
“Before Using the Printer Driver”
SETUP FLOW FOR PRINTING FEATURES 51
5 SETUP FLOW
Setup Flow for Printing via Windows Print Server
When you want to manage all print jobs in the print server instead of directly printing to this equipment, the Microsoft’s Client Server network solution is helpful. In this case, an administrator sets up the sharing printer using Raw TCP or LPR printing in Windows NT 4.0, Windows
2000, Windows XP, Windows Vista or Windows Server 2003. Then clients can install the printer driver from the Windows print server using SMB printing.
Connecting to Client Server type of Microsoft network
Windows Server 2003
Setting up the Raw TCP or LPR connection
Setting up the SMB printer connection
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Vista
Windows Server 2003
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the TCP/IP”
52 SETUP FLOW FOR PRINTING FEATURES
Setup Flow Description/Reference
Set up the IPv6
Set up the Printing Service
Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the IPv6”
Enable the Raw TCP or LPD Printing Service using TopAccess.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Print Service Settings”
“Setting up the Raw TCP Print”
“Setting up the LPD Print”
Install the Printer Driver on the Windows Print
Server
Install the printer driver from the Client Utilities CD-ROM.
Reference: Printing Guide y Chapter 2 “INSTALLING CLIENT SOFTWARE FOR WINDOWS”
“Installing the Client Software for Raw TCP/LPR Printing”
Configuring the Printer
Drivers
Setting up the Print
Server
Configure the options and department code.
Reference: Printing Guide y Chapter 5 “PRINTING FROM WINDOWS”
“Before Using the Printer Driver”
Configure the printer on the Windows print server as shared printer.
Reference: Network Administration Guide y Chapter 1 “SETTING UP NETWORK SERVER”
“Setting up Windows Print Server”
Install the Printer Driver on the Client computers
Install the printer driver from the queue in the Windows print server by point and print installation. This installation method is common for Windows print sharing service. Please refer to the Windows documentation about the installation from the Windows shared printer.
SETUP FLOW FOR PRINTING FEATURES 53
5 SETUP FLOW
Setup Flow for Novell Printing
When you want to manage the print jobs in the NetWare print server instead of directly printing to this equipment, an administrator must configure the NetWare print servers and this equipment.
This equipment supports the PSERVER in the NetWare 5.1/6.0/6.5 bindery emulation mode and
NDS/NDPS mode.
Connecting with a NetWare Environment over TCP/IP or IPX/SPX Network
NetWare 5.1
NetWare 6.0
NetWare 6.5
Setting up the Novell printer connection
Setting up the SMB printer connection to Novell print queue
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
This equipment also supports the Novell iPrint that is available for NetWare 6.0/6.5. Using Novell iPrint, users can download and install the printer driver from the NetWare server using iPrint Client.
Connecting with a Novell iPrint Environment over TCP/IP Network
NetWare 6.0
NetWare 6.5
Setting up the Novell iPrint connection
Setting up the iPrint printer connection using iPrint Client
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
54 SETUP FLOW FOR PRINTING FEATURES
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the TCP/IP”
Set up the IPv6
Set up the IPX/SPX
Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the IPv6”
When you want to connect the NetWare file server over IPX/SPX, enable the
IPX/SPX protocol and select the frame type.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the IPX/SPX Protocol”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the IPX/SPX”
Set up the NetWare settings
Configure the NetWare settings on this equipment.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the NetWare Settings”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the NetWare Session”
SETUP FLOW FOR PRINTING FEATURES 55
5 SETUP FLOW
Setup Flow Description/Reference
Set up the Printing Service
Enable the NetWare Printing Service using TopAccess.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Print Service Settings”
“Setting up the NetWare Print”
Install the Client Software Install the printer driver from the Client Utilities CD-ROM.
Reference: Printing Guide y Chapter 2 “INSTALLING CLIENT SOFTWARE FOR WINDOWS”
“Installing the Client Software for Novell Printing”
“Installing the Client Software for Novell iPrint”
Configuring the Printer
Drivers
Configure the options and department code.
Reference: Printing Guide y Chapter 5 “PRINTING FROM WINDOWS”
“Before Using the Printer Driver”
Setup Flow for Macintosh Workstation
This equipment supports AppleTalk printing, LPR printing, IPP printing, and Bonjour printing for
Macintosh computers. The configurations required are different for each printing system.
For e-STUDIO352/452, e-STUDIO353/453, e-STUDIO202L/232/282, e-STUDIO203L/233/283, e-STUDIO520/600/720/850 and e-STUDIO523/603/723/853, the printing features are available only when the Printer Kit is installed, or when the Printer/Scanner Kit is installed.
56 SETUP FLOW FOR PRINTING FEATURES
Setup Flow for AppleTalk Printing
This equipment can be used with an AppleTalk printer connection using the LaserWriter 8 printer driver.
Connecting over AppleTalk Network
Mac OS 8.6
Mac OS 9.x
Mac OS X
Setting up the AppleTalk printer connection
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the AppleTalk Enable the AppleTalk protocol.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the AppleTalk Protocol”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the AppleTalk”
Install the Client Software Install the Macintosh PPD file from the Client Utilities CD-ROM and creating a printer.
Reference: Printing Guide y Chapter 3 “INSTALLING CLIENT SOFTWARE FOR MACINTOSH”
“Installing the Printer on Mac OS 8.6/9.x”
“Installing the Printer on Mac OS X 10.2.4 to Mac OS X 10.4.x”
SETUP FLOW FOR PRINTING FEATURES 57
5 SETUP FLOW
Setup Flow for LPR Printing
This equipment can be used with LPR printer connection using the LaserWriter 8 printer driver.
Connecting over TCP/IP Network
Mac OS 8.6
Mac OS 9.x
Mac OS X
Setting up the LPR printer connection
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the TCP/IP”
Set up the IPv6
Set up the Printing Service
Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the IPv6”
Enable the LPD Printing Service using TopAccess.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Print Service Settings”
“Setting up the LPD Print”
58 SETUP FLOW FOR PRINTING FEATURES
Setup Flow Description/Reference
Install the Client Software Install the Macintosh PPD file from the Client Utilities CD-ROM and creating a printer.
Reference: Printing Guide y Chapter 3 “INSTALLING CLIENT SOFTWARE FOR MACINTOSH”
“Installing the Printer on Mac OS 8.6/9.x”
“Installing the Printer on Mac OS X 10.2.4 to Mac OS X 10.4.x”
Setup Flow for IPP Printing
This equipment can be used with the IPP printer connection for Mac OS X in a TCP/IP network using CUPS. Even though IPP printing can be used in a local area network, this method is commonly used to print over the Internet. If you allow IPP printing through the Internet, you must configure the DNS server to enable users to access this equipment over the Internet using the
HTTP protocol. This is useful when users want to print to this equipment from outside the local area network.
Connecting over TCP/IP Network
Mac OS X
Setting up the IPP printer connection
IPP printing for Macintosh is available for Mac OS X 10.2.4 to 10.4.x.
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the TCP/IP”
SETUP FLOW FOR PRINTING FEATURES 59
5 SETUP FLOW
Setup Flow
Set up the IPv6
Set up the DNS
(Optional)
Set up the Printing Service
Description/Reference
Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the IPv6”
If you want to print from the Internet, configure the DNS settings using
TopAccess to enable accessing to this equipment over the Internet. Also, if the DNS server supports the Dynamic DNS, enable the DDNS as well.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the DNS Session” y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
‘ Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the DDNS Session”
Enable the IPP Printing Service using TopAccess.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Print Service Settings”
“Setting up the IPP Print”
Install the Client Software Install the Macintosh PPD file from the Client Utilities CD-ROM and creating a printer.
Reference: Printing Guide y Chapter 3 “INSTALLING CLIENT SOFTWARE FOR MACINTOSH”
“Installing the Printer on Mac OS X 10.2.4 to Mac OS X 10.4.x”
60 SETUP FLOW FOR PRINTING FEATURES
Setup Flow for Bonjour Printing
This equipment can be used with Bonjour printer connection.
Connecting over TCP/IP Network
Mac OS X
Setting up the Bonjour printer connection
Bonjour printing for Macintosh is available for Mac OS X 10.2.4 to 10.4.x.
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the TCP/IP”
Set up the IPv6 Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the IPv6”
SETUP FLOW FOR PRINTING FEATURES 61
5 SETUP FLOW
Setup Flow
Set up the Bonjour
Description/Reference
Enable the Bonjour using TopAccess.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the Bonjour”
Install the Client Software Install the Macintosh PPD file from the Client Utilities CD-ROM and creating a printer.
Reference: Printing Guide y Chapter 3 “INSTALLING CLIENT SOFTWARE FOR MACINTOSH”
“Installing the Printer on Mac OS X 10.2.4 to Mac OS X 10.4.x”
Setup Flow for UNIX Workstation
This equipment supports printing for UNIX workstations using the UNIX Filters or CUPS.
For e-STUDIO352/452, e-STUDIO353/453, e-STUDIO202L/232/282, e-STUDIO203L/233/283, e-STUDIO520/600/720/850 and e-STUDIO523/603/723/853, the printing features are available only when the Printer Kit is installed, or when the Printer/Scanner Kit is installed.
Setup Flow for LPR Printing
This equipment provides the UNIX filters to print from UNIX workstations. You can perform LPR printing from the UNIX workstation using the UNIX filters.
Connecting over TCP/IP Network
Unix workstation
Setting up the LPR printer connection
62 SETUP FLOW FOR PRINTING FEATURES
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the TCP/IP”
Set up the IPv6
Set up the Printing Service
Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the IPv6”
Enable the LPD Printing Service using TopAccess.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Print Service Settings”
“Setting up the LPD Print”
Install the Client Software Install the UNIX filters from the Client Utilities CD-ROM and configure a print queue.
Reference: Printing Guide y Chapter 4 “INSTALLING CLIENT SOFTWARE FOR UNIX”
“Setting Up the UNIX Filters”
SETUP FLOW FOR PRINTING FEATURES 63
5 SETUP FLOW
Setup Flow for IPP Printing
This equipment can be used with the IPP printer connection for UNIX workstation in a TCP/IP network using CUPS. Even though IPP printing can be used in a local area network, this method is commonly used to print over the Internet. If you allow IPP printing through the Internet, you must configure the DNS server to enable users to access this equipment over the Internet using the HTTP protocol. This is useful when users want to print to this equipment from outside the local area network.
Connecting over Internet
Unix workstation
Setting up the IPP printer connection using CUPS
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the TCP/IP”
Set up the IPv6 Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the IPv6”
64 SETUP FLOW FOR PRINTING FEATURES
Setup Flow
Set up the DNS
(Optional)
Set up the Printing Service
Description/Reference
If you want to print from the Internet, configure the DNS settings using
TopAccess to enable accessing to this equipment over the Internet. Also, if the DNS server supports the Dynamic DNS, enable the DDNS as well.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the DNS Session” y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
‘ Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the DDNS Session”
Enable the IPP Printing Service using TopAccess.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Print Service Settings”
“Setting up the IPP Print”
Install the Client Software Install the CUPS from the Client Utilities CD-ROM and configure a print queue.
Reference: Printing Guide y Chapter 4 “INSTALLING CLIENT SOFTWARE FOR UNIX”
“Setting Up the CUPS”
Setup Flow for FTP Printing
FTP printing allows users to send a print file using the FTP protocol from anywhere you can access to this equipment.
This equipment supports FTP printing which enables to print a file sent through FTP protocol.
Users can send a print file using the FTP download tools to this equipment from any operating systems.
This equipment can print following files using the FTP printing: y PCL format print job file y PostScript Level 3 print job file y Text data file
Connecting over TCP/IP Network
Sending a print file using FTP
SETUP FLOW FOR PRINTING FEATURES 65
5 SETUP FLOW
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the TCP/IP”
Set up the IPv6
Set up the FTP Server setting
Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the IPv6”
Enable the FTP Server option using TopAccess.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the FTP Server”
Set up the Printing Service
Enable the FTP Printing Service using TopAccess.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Print Service Settings”
“Setting up the FTP Print”
66 SETUP FLOW FOR PRINTING FEATURES
Setup Flow for E-mail Printing
E-mail printing allows users to print a file by sending the file as an E-mail message to this equipment.
For e-STUDIO352/452, e-STUDIO353/453, e-STUDIO202L/232/282, e-STUDIO203L/233/283, e-STUDIO520/600/720/850 and e-STUDIO523/603/723/853, the E-mail printing feature is available only when the Scanner Kit is installed, or when the Printer/Scanner Kit is installed.
This equipment allows you to print a file sent to it via E-mail. This equipment will receive the message from the POP3 account in the E-mail server and print the file.
This equipment can print the TIFF files only.
Connecting to Internet
Receive print file from POP3 server
Internet
E-mail Server
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the TCP/IP”
SETUP FLOW FOR PRINTING FEATURES 67
5 SETUP FLOW
Setup Flow Description/Reference
Set up the IPv6 Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the IPv6”
Set up the E-mail Server Configure the POP3 account for this equipment in the incoming mail server and DNS Server to enable to receive E-mail print file from the Internet.
Reference: Network Administration Guide y Chapter 1 “SETTING UP NETWORK SERVER”
“Setting up DNS and Mail Servers”
Set up the E-mail Setting Specifying the POP3 Network Servers settings using TopAccess.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the POP3 Network Service”
Set up the Printing Service
Enable the E-mail Printing Service using TopAccess.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Print Service Settings”
“Setting up the E-mail Print”
68 SETUP FLOW FOR PRINTING FEATURES
SETUP FLOW FOR SCANNING FEATURES
Setup Flow for Scan to File
The Scan to File feature allows users to save scanned images — scanned by a copy operation, scan operation, or fax operation — to the local hard disk or the network shared folder.
For e-STUDIO352/452, e-STUDIO353/453, e-STUDIO202L/232/282, e-STUDIO203L/233/283, e-STUDIO520/600/720/850 and e-STUDIO523/603/723/853, the Scan to File feature is available only when the Scanner Kit is installed, or when the Printer/Scanner Kit is installed.
You can enable or disable the Scan to File into the network folders. When enabled, you can specify which network folders to save the scanned file, or you can allow users to specify the network folders for each Scan to File operation. Users can specify the network folders that can be accessed either SMB, NetWare IPX/SPX, NetWare TCP/IP, or FTP regardless of the OS.
Copy/Scan/Fax
Connecting over TCP/IP or IPX/SPX Network
Save as File into Network folders
Save as File into Local folders
Local Hard Disk
SMB server
NetWare server
FTP server
Network Hard Disk
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address. Also, configure the
WINS settings if your Windows network is managed with the WINS server.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the TCP/IP”
SETUP FLOW FOR SCANNING FEATURES 69
5 SETUP FLOW
Setup Flow Description/Reference
Set up the IPv6 Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the IPv6”
Set up the FTP Network
Service
Enable the FTP Client using TopAccess.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the FTP Client”
Set up the Destination An administrator should configure the network folder will be enabled or disabled for Scan to File destination using TopAccess.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Save as file Settings”
“Setting up the Destination”
Set up the Remote 1 and
Remote 2
If the network folder is enabled for the Scan to File destination, an administrator should specify the network folders to save the scanned file, or allows users to specify the network folder using TopAccess.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Save as file Settings”
“Setting up the Remote 1 and Remote 2”
70 SETUP FLOW FOR SCANNING FEATURES
Setup Flow for Scan to E-mail
The Scan to E-mail feature allows users to send scanned images as a PDF, TIFF, JPG*, or XPS file over the Internet to client computers.
* It is only applicable for e-STUDIO520/600/720/850, e-STUDIO523/603/723/853 and e-STUDIO 281c/
351c/451c.
For e-STUDIO352/452, e-STUDIO353/453, e-STUDIO202L/232/282, e-STUDIO203L/233/283, e-STUDIO520/600/720/850 and e-STUDIO523/603/723/853, the Scan to E-mail feature is available only when the Scanner Kit is installed, or when the Printer/Scanner Kit is installed.
When configuring the Scan to E-mail environment, this equipment sends an E-mail to the SMTP server and transfers the document to the Internet. A DNS server is required for the SMTP server to transmit the Scan to E-mail document into the Internet. This function can be used to send scanned images to the computers. Do not use this function to send scanned images to other
MFPs.
Connecting to Internet
Scan to Email
Send email to the Internet via SMTP server
Internet
SMTP Server
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address. Also, configure the
WINS settings if your Windows network is managed with the WINS server.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the TCP/IP”
SETUP FLOW FOR SCANNING FEATURES 71
5 SETUP FLOW
Setup Flow Description/Reference
Set up the IPv6 Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the IPv6”
Set up the E-mail Setting An administrator should specify the “from Address”, “from name”, and body text that applies to the E-mail.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
“7. SETTING E-MAIL FUNCTIONS”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Email Settings”
“Setting up the Email Settings”
Set up the E-mail Server An administrator should configure the DNS Server and SMTP Server in your network.
Reference: Network Administration Guide y Chapter 1 “SETTING UP NETWORK SERVER”
“Setting up DNS and Mail Servers”
Set up the SMTP Network Service
Specifying the SMTP Client using TopAccess.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the SMTP Client”
72 SETUP FLOW FOR SCANNING FEATURES
Setup Flow for Remote Scan
This equipment provides the Remote Scan driver that allows users to operate scanning remotely from the Windows computer and import the scanned images into a TWAIN-compliant application.
The Remote Scan feature is available only when the Scanner Kit is installed, or when the
Printer/Scanner Kit is installed.
The Remote Scan driver can connect to this equipment over TCP/IP network.
Originals
Connecting over TCP/IP Network
Remotely operate scanning using Remote Scan driver
Windows 2000
Windows XP
Windows Vista
Windows Server 2003
Retrieve scanned images into TWAIN compatible application
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the TCP/IP”
SETUP FLOW FOR SCANNING FEATURES 73
5 SETUP FLOW
Setup Flow Description/Reference
Set up the IPv6 Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the IPv6”
Install the Client Software Install the Remote Scan driver from the Client Utilities CD-ROM.
Reference: Scanning Guide y Chapter 8 “REMOTE SCAN”
“Installing Remote Scan Driver”
74 SETUP FLOW FOR SCANNING FEATURES
SETUP FLOW FOR FAX FEATURES
Setup Flow for Network-Fax
The Network-Fax enable users to output a document to a facsimile or Internet Fax device instead of printing a document using a printer.
Users can send a document in a computer to a facsimile or Internet Fax device using a N/W-Fax driver via the equipment.
y For e-STUDIO352/452, e-STUDIO353/453, e-STUDIO202L/232/282, e-STUDIO203L/233/
283, e-STUDIO520/600/720/850 and e-STUDIO523/603/723/853, the fax transmission using a N/W-Fax driver is available only when the Printer Kit and optional Fax unit are installed, or when the Printer/Scanner Kit and optional Fax unit are installed.
y For e-STUDIO352/452, e-STUDIO353/453, e-STUDIO202L/232/282, e-STUDIO203L/233/
283, e-STUDIO520/600/720/850 and e-STUDIO523/603/723/853, the internet fax transmission using a N/W-Fax driver is available only when the Printer Kit and Scanner Kit are installed, or when the Printer/Scanner Kit is installed.
y For e-STUDIO 281c/351c/451c, the fax transmission using a N/W-Fax driver is available only when the optional Fax unit are installed.
Using the N/W-Fax driver, users can send a document to this equipment as a print job. The receiving fax numbers (or E-mail addresses) are specified by the user and the equipment then sends the job through the Public Switched Telephone Network or the Internet.
To send a fax through the Public Switched Telephone Network, users must configure the equipment accordingly.
When sending an internet fax, the equipment sends the document to the SMTP server and transfers it to the Internet. (A DNS server is required for the SMTP server to transmit the document into the Internet.)
Connecting to Internet
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Vista
Windows Server 2003
Printing a document using N/W-Fax driver
Send a document as
Internet Fax to the Internet via SMTP server
Internet
SMTP Server
G3 Facsimile or
Internet Fax Device
Send a document as fax document via
Public Switched Telephone network
SETUP FLOW FOR FAX FEATURES 75
5 SETUP FLOW
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address. Also, configure the
WINS settings if your Windows network is managed with the WINS server.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the TCP/IP”
Set up the IPv6 Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the IPv6”
Setting the Terminal ID If the optional Fax unit is installed, specify the terminal ID to identify the fax terminal information.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “5. SETTING FAX FUNCTIONS”
“Setting the Terminal ID”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Fax Settings”
“Setting up the Fax Settings”
76 SETUP FLOW FOR FAX FEATURES
Setup Flow Description/Reference
Set up the Save as file
Setting
An administrator should specify the Save as file destination and network folder to enable the Save as file features on the N/W-Fax driver.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Save as file Settings”
“Setting up the N/W-Fax Destination” y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Save as file Settings”
“Setting up the N/W-Fax Folder”
Install the Client Software Install the N/W-Fax driver from the Client Utilities CD-ROM.
Reference: Network Fax Guide y Chapter 2 “INSTALLING CLIENT SOFTWARE”
“Installing Network Fax Software
If you want to send an internet fax using the N/W-Fax driver, you must configure the equipment to enable the Internet Fax transmission.
P.77 “Setup Flow for Internet Fax”
Setup Flow for Internet Fax
The Internet Fax feature allows users to send originals, same as the fax features. However, the
Internet Fax is sent through the Internet, although the fax is sent through the public switched telephone line. In order to send the Internet Fax, the remote device also must support the Internet Fax feature.
y For e-STUDIO352/452, e-STUDIO353/453, e-STUDIO202L/232/282, e-STUDIO203L/233/
283, e-STUDIO520/600/720/850 and e-STUDIO523/603/723/853, the internet fax transmission is available only when the Scanner Kit is installed, or when the Printer/Scanner Kit is installed.
y The color images cannot be sent by the Internet Fax. Same as the fax transmission, the originals will be converted to the black and white images when sending as an Internet Fax.
This equipment sends the internet faxes via a SMTP server and receives them from a POP3 server.
SETUP FLOW FOR FAX FEATURES 77
5 SETUP FLOW
To configure the Internet Fax environment, configure the SMTP server to send and the POP3 server to receive. Remember that a DNS server is required for the SMTP and POP3 servers to transmit the document over the Internet. To enable receiving an internet fax, configure the POP3 account for this equipment in the POP3 server. This equipment can access the POP3 server to check if an internet fax message has been received — same as the E-mail client software.
Connecting to Internet
Internet Fax original
Send Internet Fax to the Internet via SMTP server
Internet
Receive Internet
Fax from POP3 server
Email Server
Internet Fax Device
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address. Also, configure the
WINS settings if your Windows network is managed with the WINS server.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the TCP/IP”
78 SETUP FLOW FOR FAX FEATURES
Setup Flow Description/Reference
Set up the IPv6
Set up the Internet Fax
Setting
Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the IPv6”
An administrator should specify the “from Address”, “from name”, and body text that applies to the Internet Fax.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
“8. SETTING INTERNET FAX FUNCTIONS”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Internet Fax Settings”
“Setting up the Internet Fax Settings”
Set up the E-mail Server An administrator should configure the DNS Server, POP3 Server, and SMTP
Server in your network.
Reference: Network Administration Guide y Chapter 1 “SETTING UP NETWORK SERVER”
“Setting up DNS and Mail Servers”
Set up the SMTP Network Service
Specifying the SMTP Client using TopAccess.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the SMTP Client”
Set up the POP3 Network
Service
Specifying the POP3 Network Service using TopAccess.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the POP3 Network Service”
SETUP FLOW FOR FAX FEATURES 79
5 SETUP FLOW
Setup Flow for Onramp Gateway
This equipment can convert received faxes into E-mails and forward them to other Internet Fax devices or client computers using Onramp Gateway transmission.
The Onramp Gateway feature is available only when the Scanner Kit and optional Fax unit are installed, or when the Printer/Scanner Kit and optional Fax unit are installed.
This equipment can create the ITU-T relay mailbox in which E-mail addresses are registered as end stations to achieve the Onramp Gateway transmission. Any ITU-T compatible facsimile can send a fax to the ITU-T relay mailbox. This equipment then forwards received faxes to the Email addresses registered in the ITU-T relay mailbox.
To use this equipment as a Hub Station for the Onramp Gateway transmission, the Relay Box in which E-mail addresses are registered must be set up. This equipment, as the distributor, can send an E-mail of any faxes received from any ITU-T compatible facsimile device.
ITU-T compatible
G3 Facsimile
Onramp Gateway
Sending a fax to the Relay Box of the equipment through the
Public Switched Telephone network
Send a document as
Internet Fax to the Internet via SMTP server
ITU-T
Relay Box
Internet
SMTP Server
Email addresses are assigned as destinations in the Relay Box
The Internet Fax device receives the document from the Internet as an Internet Fax document.
Internet Fax Device
The client computer receives the document from the Internet as an email document.
Client Computers
80 SETUP FLOW FOR FAX FEATURES
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address. Also, configure the
WINS settings if your Windows network is managed with the WINS server.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the TCP/IP”
Set up the IPv6 Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the IPv6”
Set up the Internet Fax
Setting
An administrator should specify the “from Address”, “from name”, and body text that applies to the internet fax.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
“8. SETTING INTERNET FAX FUNCTIONS”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Internet Fax Settings”
“Setting up the Internet Fax Settings”
Set up the E-mail Server An administrator should configure the DNS Server and SMTP Server in your network.
Reference: Network Administration Guide y Chapter 1 “SETTING UP NETWORK SERVER”
“Setting up DNS and Mail Servers”
SETUP FLOW FOR FAX FEATURES 81
5 SETUP FLOW
Setup Flow
Set up the SMTP Network Service
Registering the Relay
Box
Description/Reference
Specifying the SMTP Client using TopAccess.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the SMTP Client”
Register the Relay Box that E-mail addresses are entered as the destinations.
Reference: OPERATOR’S MANUAL FOR FACSIMILE FUNCTION y Chapter 5 “ADVANCED FUNCTIONS”
Ð “MAILBOX (ITU-T COMPATIBLE)”
“Setting up the Relay Mailbox”
Setup Flow for Offramp Gateway
This equipment can be used as a Hub Station to forward E-mails — from your client computer or
Internet Fax device — to any facsimile on the public switched telephone network.
For example, the document can be sent to this equipment from out of the country through the
Internet, then the document can be sent from this equipment to the designated fax number through the local public telephone line.
The Offramp Gateway feature is available only when the Scanner Kit and optional Fax unit are installed, or when the Printer/Scanner Kit and optional Fax unit are installed.
82 SETUP FLOW FOR FAX FEATURES
When enabling the Offramp Gateway, this equipment works as an SMTP server to receive Emails from the Internet. To enable the SMTP transmission in this equipment, the hostname (or specific domain) that relates to this equipment must be designated using the DNS server. Then designate the MX record and configure the SMTP server to route the E-mails received. If the hostname of this equipment is designated as “host1.ifax.com”, it is set to transfer the E-mails to this machine when an E-mail to “<account name>@host1.ifax.com” is delivered.
Offramp Gateway
An Email is sent to
"FAX=<fax number>@host1.ifax.com" from a client computer
Client Computer An Internet Fax is sent to
"FAX=<fax number>@host1.ifax.com" from an Internet Fax device
Internet
Internet Fax Device domain is "host1.ifax.com" using SMTP transmission SMTP Server
An Email or Internet Fax is converted to the facsimile document and sent to
<fax number> G3 facsimile
G3 Facsimile
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address. Also, configure the
WINS settings if your Windows network is managed with the WINS server.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the TCP/IP”
SETUP FLOW FOR FAX FEATURES 83
5 SETUP FLOW
Setup Flow
Set up the IPv6
Set up the Internet Fax
Setting
Set up the DNS Server
Description/Reference
Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the IPv6”
An administrator should specify the “from Address”, “from name”, and body text that applies to the internet fax.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
“8. SETTING INTERNET FAX FUNCTIONS”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Internet Fax Settings”
“Setting up the Internet Fax Settings”
An administrator should configure the DNS Server and SMTP Server in your network.
Reference: Network Administration Guide y Chapter 1 “SETTING UP NETWORK SERVER”
“Setting up DNS and Mail Servers”
Set up the DNS
Set up the SMTP Network Service
Configure the DNS settings using TopAccess to enable receiving internet faxes from the Internet. Also, if the DNS server supports the Dynamic DNS, enable the DDNS as well.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the DNS Session” y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the DDNS Session”
Specifying the SMTP Server using TopAccess for this equipment works as a
SMTP server.
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the SMTP Server”
84 SETUP FLOW FOR FAX FEATURES
SETUP FLOW FOR E-FILING FEATURE
Setup Flow for e-Filing Web Utility
Users can manage the boxes, folders, and documents in e-Filing from computers using the web browser.
To enable the e-Filing features, an administrator should set up the network connection between computers and this equipment over TCP/IP, and enable the HTTP network service. Using the e-
Filing web utility, users can create, edit, delete boxes and folders in e-Filing, and also create, edit, and delete documents stored in e-Filing using the editing functions.
Connecting over TCP/IP Network
Copy or Scan to e-Filing
Print to e-Filing
Windows computer
Managing e-Filing using the Web browser e-Filing
Windows computer
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the TCP/IP”
Set up the IPv6 Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the IPv6”
SETUP FLOW FOR E-FILING FEATURE 85
5 SETUP FLOW
Setup Flow Description/Reference
Set up the HTTP Network
Service
Enable the HTTP Network Server.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the HTTP Network Service”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the HTTP Network Service”
Setup Flow for e-Filing Client Software
This equipment supports importing the scan images that are saved in the e-Filing of this equipment into a client computer using the TWAIN driver and File Downloader.
The TWAIN driver and File Downloader can retrieve documents that are stored in the e-Filing by the Store to e-Filing functions. The TWAIN driver can be selected for TWAIN compliant applications such as Adobe Photoshop and for retrieving document from e-Filing into the application.
The File Downloader can work as an application to retrieve e-Filing documents to local hard disk.
The TWAIN driver and File Downloader can connect to this equipment over TCP/IP network.
Connecting over TCP/IP Network e-Filing
Retrieving from e-Filing documents into your PC
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Vista
Windows Server 2003
86 SETUP FLOW FOR E-FILING FEATURE
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the TCP/IP”
Set up the IPv6 Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the IPv6”
Set up the HTTP Network
Service
Enable the HTTP Network Server.
Reference: USER FUNCTIONS GUIDE y Chapter 4 “SETTING ITEMS (ADMIN)”
Ð “3. SETTING NETWORK FUNCTIONS”
“Setting the HTTP Network Service”
Reference: TopAccess Guide y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
Ð “Setting up from TopAccess”
Ð “Setting up Network Settings”
“Setting up the HTTP Network Service”
Install the Client Software Install the e-Filing client software from the Client Utilities CD-ROM.
Reference: e-Filing Guide y Chapter 4 “USING CLIENT SOFTWARE”
“Installing e-Filing Client Software”
SETUP FLOW FOR E-FILING FEATURE 87
DP-2050/2340/2840
DP-3540/4540
DP-5200/6000/7200/8500
OME07009500
MULTIFUNCTIONAL DIGITAL SYSTEMS
Quick Start Guide
2-17-2, HIGASHIGOTANDA, SHINAGAWA-KU, TOKYO, 141-8664, JAPAN
2007 TOSHIBA TEC CORPORATION All rights reserved
6LE10009000
R070720E0500-TTEC
2007-10
Advertisement
Key features
- Scanning
- Copying
- Printing
- Faxing
- Network Connectivity
- e-Filing
- User-Friendly Interface
- Advanced Features
- Security Features