N150 Wireless Router Step 1: Step 2: Step 3: Step 6: Step

N150 Wireless Router Step 1: Step 2: Step 3: Step 6: Step
Installation Guide
N150 Wireless Router
Step 1:
Step 2:
Step 3:
Unplug the power
to turn off your modem.
Connect one end of the blue
Ethernet cable to your modem,
and the other end to the Internet port
on your router.
Plug in, then turn on your modem.
If your modem has a battery backup,
first remove and reinsert the battery
before connecting your
modem to power.
Package Contents:
or Cable
N150 Wireless Router
Wait approximately 2 minutes
until your modem turns on.
N150 Wireless Router
(not included)
Power adapter
Ethernet cable
Step 4:
Step 5:
Step 6:
Connect the power adapter to the
router, then plug it into an outlet.
Wait until the wireless LED turns
solid green.
Connect the router
to your computer.
Open a browser.
If none of the LEDs turn on, make sure that
the Power On/Off button is in the ON position
(pushed in).
Optionally, connect wirelessly by using the
preset wireless security settings
located on the bottom label.
Use another Ethernet cable to establish
a wired connection as shown in this diagram.
If the Web page does not display,
close and re-open the browser
and enter http://routerlogin.net
in the address bar, or check the
“Troubleshooting” section in
the User Guide.
Preset Wireless Security
This product has a unique Wi-Fi network name (SSID) and network key (password).
The default SSID and network key (password) are uniquely generated for every
device (like a serial number), to protect and maximize your wireless security. This
information is located on the label on the bottom of the product.
NETGEAR recommends that you do not change the preset Wi-Fi network name
(SSID) and network key (password). If you do change the settings, the information
on the bottom of the product does not apply.
Connect Wireless Devices to Your Router
Technical Support
Choose either the manual or Wi-Fi Protected Setup (WPS) method to add wireless
computers, and other devices to your wireless network.
Thank you for selecting NETGEAR products.
Manual Method
Open the software utility that manages your wireless connections on the
wireless device that you want to connect to your router (iPhone, laptop,
computer, gaming device). This utility scans for all wireless networks in your
2. Look for the preset NETGEAR wireless network name (SSID), and select it.
The preset Wi-Fi network name (SSID) is located on the product label on the
bottom of the router.
Note: If you changed the name of your network during the setup process, look
for that network name.
Enter the preset password (or your custom password if you changed it), and
click Connect.
4. Repeat steps 1–3 to add other wireless devices.
Find the preset Wireless Settings on your router and record them here:
Network Key (Password) _________________________________
If you change the preset wireless settings, record it here:
Wireless Network Name (SSID) _______________________________
Network Key (Password) _____________________________________
If necessary to retrieve or update your password, type
http://www.routerlogin.net in a Web browser and log in using the
default user name (admin) and password (password).
For the free Live Parental Controls centralized Internet site filtering software for your
router, download from: http://www.netgear.com/lpc.
For additional features, including Traffic Metering and Guest Access, log in to your
router at: http://routerlogin.net.
For complete DoC, go to the NETGEAR EU Declarations of Conformity website at
For GNU General Public License (GPL) related information, go to
WARNING: Do not stack equipment, or place equipment in tight spaces, in drawers, or on
carpets. Make sure your equipment is surrounded by at least 2 inches of air space.
Download the free Desktop
WPS Method
If your wireless device supports WPS (Wi-Fi Protected Setup)—NETGEAR calls
this method Push 'N' Connect—you might be prompted to press the WPS button on
the router instead of entering a password. If this happens:
Wi-Fi Network Name (SSID) _______________________________
After installing your device, register at http://www.NETGEAR.com/register so you
can use our telephone support service. Also go to http://support.netgear.com for
product updates, additional documentation, and support.
Press the WPS button
on the router.
WiFi Connection
Router Settings
STATUS Connected
Click here
Network Map
Parental Controls
Number of devices 16
Click here
Click here
Automatically fix common network
problems and easily manage your
home network connections.
Within 2 minutes, press the WPS button on the client device, or follow the
WPS instructions that came with your wireless device to complete the WPS
process. The device will then be connected to your router.
3. Repeat this process to add other WPS wireless devices.
Note: WPS does not support WEP security. If you try to connect a WEP client
to your network using WPS, it will not work.
Select Wireless Settings to locate your wireless password.
May 2012
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of
NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to
change without notice. Other brand and product names are trademarks or registered trademarks of their
respective holders. © 2012 NETGEAR, Inc. All rights reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF