LC-32LE155M LC-39LE155M

LC-32LE155M LC-39LE155M
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many
years of trouble-free operation of your product, please read the Important Safety Precautions
carefully before using this product.
LC-32LE155M
LC-39LE155M
Important Safety Precautions
• Stand base must be attached to prevent the TV set from falling down and cause injuries.
LED BACKLIGHT TV
• Cleaning — Unplug the AC cord from the AC outlet before cleaning the product. Use a soft damp cloth to clean the
product. Do not use liquid cleaners, aerosol cleaners or chemical cloth to clean it, as such materials may damage the
product.
OPERATION MANUAL
• Water and moisture — Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub,
swimming pool and in a wet basement.
• Do not place vases or any other water-filled containers on this product.
The water may spill onto the product causing fire or electric shock.
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall,
resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table
recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the
manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.
Supplied accessories
Remote control unit
• When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and
uneven floor surface can cause the product to fall from the cart.
“AAA” size battery (g2)
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents
and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the
product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed
for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation
is provided or the manufacturer’s instructions are followed.
• The LCD panel used in this product is made of glass. Therefore, it can break when the product is struck forcefully or with a
sharp object. If the LCD panel is broken, be careful not to be injured by broken glass.
Operation manual
• Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating
products (including amplifiers).
Stand unit
• To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
• To prevent fire or shock hazard, do not place the AC power cord under the TV set or other heavy items.
• Do not place heavy objects on this product or stand on it. Doing so could cause injury if the product overturns. Take
special care near children and pets.
Stand base
Post
• The LCD panel is a very high technology product with 1,049,088 (only for LC-32LE155M)/2,073,600 (only for LC-39LE155M)
pixels, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point of
blue, green or red.
This is within product specifications and does not constitute a fault.
Screws (g 5)
Contents
Page
Supplied accessories ..........................1
Dear SHARP customer ........................ 2
Important Safety Precautions ............. 2
Trademarks .......................................... 2
Attaching the stand ............................. 3
Antenna connection ............................ 3
Connecting external devices ............. 4
Remote control unit ............................ 5
Part names ........................................... 6
Turning the TV on/off .......................... 6
Initial auto installation ......................... 7
Selecting a preset AV mode ............... 7
Menu operation ................................... 7
• Precautions when transporting the TV
When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always carry
the TV by two people holding it with two hands — one hand on each side of the TV.
Page
Programme setup ................................ 7
Picture menu ........................................ 8
Audio menu .......................................... 9
ECO menu ............................................ 9
Setup menu ........................................ 10
Option menu ...................................... 11
Colour adjustment and still image ... 12
ECO mode .......................................... 12
Timer ....................................................12
USB Media Player .............................. 13
Appendix ............................................. 15
Specifications .................................... 16
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
• Install the product on the place where the AC cord can be unplugged easily from the AC outlet.
Trademarks
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
Printed in Malaysia
TINS-F895WJZZ 1
13P06-MA-NF
1
LC-32LE155M_EN_F895.indd 1
2
6/24/2013 3:29:11 PM
Connecting external devices
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from
being damaged.
1
You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD
player, Digital TV STB (Set Top Box) and PC. To view external source images, select the input source from
INPUT on the remote control unit or INPUT on the TV.
Confirm the screws supplied with the TV.
CAUTION
• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital
TV STB (Set Top Box), PC or other external equipment.
• Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.
Screws (m5)
(used in step 2 and 3)
Connecting a VCR, game console or camcorder
2
Insert and hook post guide into stand base slot
holes. (1)
Fix the post using short screw. (2)
3
Insert the stand base to the stand post on the
bottom of the TV. (3)
4
Insert and tighten the 4 long screws into the 4
holes on the bottom of the stand base. (4)
A VCR, game console, camcorder and some other audiovisual equipment can be conveniently connected
using the INPUT 2 or INPUT 3 terminals.
When using component cable
When using composite cable
(commercially available)
(commercially available)
Soft cushion
Y
PB
(CB)
PR
(CR)
L
AUDIO
R
NOTE
or
• To detach the stand, perform the steps in reverse order.
3
CAUTION
• Do not attach or detach the stand without holding it.
Doing so can cause the stand to fall, resulting in serious
personal injuries as well as damage to the stand.
L
L
AUDIO
AUDIO
R
R
VCR/Game
console/Camcorder
4
VCR/Game
console/Camcorder
Connecting a DVD player/Digital TV STB (Set Top Box)
Antenna connection
You can use the INPUT 1 (HDMI) or INPUT 2 terminals when connecting to a DVD player/Digital TV STB (Set
Top Box) and other audiovisual equipment.
When using HDMI-certified cable
When using component cable
(commercially available)
(commercially available)
Connect antenna cable to the antenna terminal
Y
PB
(CB)
PR
(CR)
or
L
DVD player/
Digital TV STB
(Set Top Box)
If your outdoor antenna uses a 75-ohm coaxial
cable with a standard DIN45325 plug
(IEC 169-2), plug it into the antenna jack at the
rear of the set.
If your outdoor antenna uses a 300-ohm twinlead flat feeder, connect a 300-ohm to 75-ohm
impedance converter and plug it into the antenna
jack at the rear of the set.
Connecting a PC
You can use the INPUT 1 (HDMI) terminal when
connecting to a PC.
AUDIO
R
DVD player/Digital TV
STB (Set Top Box)
Connecting a USB device
Connect a USB device to the TV.
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH
THE AC CORD CONNECTED.
NOTE
• Place the TV close to the AC outlet, and keep the power plug within reach.
CAUTION
PC
• Do not disconnect a USB device from the TV while
transferring files, when a screen is in “USB” mode.
• The illustrations used throughout this manual are based on LC-32LE155M.
• The illustrations used throughout this manual are based on LC-32LE155M.
3
LC-32LE155M_EN_F895.indd 2
4
6/24/2013 3:29:11 PM
Remote control unit
1
2
3
12
13
TIMER
14
4
5
15
6
16
7
17
8
18
9
10
19
11
Part names
7 VOLk/VOLl
Set the volume.
(VOLk) Increase the volume.
(VOLl) Decrease the volume.
TV (Front)
Remote control sensor
8 e (Mute)
Press e s Mutes sound.
Press e again s Restores sound.
Mute will be cancelled after 30 minutes. However, the TV
will not suddenly output loud sound as the volume level will
be set to 0 automatically. Increase the volume level by
pressing VOL k.
POWER indicator
Light off
Lighted (Red)
Lighted (Green)
9 a/b/c/d (Cursor)
Select a desired item on the setting screen.
ENTER
Execute a command.
TV (Rear)
10 WIDE
Change the wide image mode. (See page 9.)
11 Colour (Red/Green/Yellow/Blue)
The coloured buttons are correspondingly used to select the
coloured items on the screen.
1 POWER (STANDBY/ON)
To switch the power on and off. (See page 6.)
2 DISPLAY
Display the channel or input information.
3 TIMER
Set the Sleep Timer and Reminder. (See page 12.)
4 0–9
Set the channel.
5 A (Flashback)
Press A to return to the previous selected channel
or external input mode.
6 AV MODE
Select an audio and video setting. (See page 7.)
12 ECO
Reduce overall power consumption based on user
preferences. (See page 12.)
13 COLOUR ADJ. (FREEZE)
Freeze a motion picture on the screen and adjust the colour
tone of the still image. (See page 12.)
14 PHOTO
Display your pictures directly on the TV screen. (See page 13.)
15 INPUT (INPUT SOURCE)
Select an input source.
16 CHr/CHs
TV input mode: Select the channel.
(CHr) Increase the channel number.
(CHs) Decrease the channel number.
17 MENU
Display the menu screen.
18 MPX
Select the sound multiplex mode.
19 RETURN
MENU mode: Return to the previous menu screen.
2
7
10
3
8
11
9
4
12
5
2
Insert the two supplied “AAA” size
batteries.
3
Close the battery cover.
Turning the TV on/off
Turning on/off the power
• To turn on the power
Press POWER on the TV. (After a few seconds, an image
appears with sound.)
• To turn off the power
Switch it off by pressing POWER on the TV.
• Place batteries with their terminals corresponding to
the (e) and (f) indications in the battery compartment.
Standby mode
• To standby mode
If the TV is switched on, you can switch it to standby by
pressing POWER on the remote control.
• Switching on from standby
From standby, press POWER on the remote control.
NOTE
• If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby mode.
CAUTION
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
5
LC-32LE155M_EN_F895.indd 3
POWER (On/Off) button
MENU button
INPUT button
Channel up (r)/down (s) buttons
Volume up (e)/down (f) buttons
USB terminal*
INPUT 1 (HDMI) terminal
SERVICE ONLY terminal**
INPUT 3 terminals
/AUDIO output (R/L) terminal
Antenna input terminal
INPUT 2 (COMPONENT/AV INPUT) terminals
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
• The illustrations used throughout this manual are based on LC-32LE155M.
Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become
depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.
Open the battery cover.
1
6
1
2
3
4
5
6
7
8
9
10
11
12
* USB terminal use for USB Media Player. (See page 13.)
** Usually do not connect anything to this terminal as it is reserved only for service personnel.
Inserting the batteries
1
Power off.
The TV is in standby mode.
The TV is on.
6
6/24/2013 3:29:11 PM
Initial auto installation
When the TV powers on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings
one after another.
1
2
1
Press POWER on the TV.
• The initial auto installation wizard appears.
3
2
Press a/b to select the desired language,
and then press ENTER.
4
3
Press a/b to select “HOME” or “STORE”, and
then press ENTER.
• Auto installation will be executed.
• You do not need to do anything during the auto
search.
Press MENU and the MENU screen displays.
Press c/d to select the desired menu.
(Programme setup, Picture, Audio, ECO, Setup,
Option)
Press a/b to select the desired menu item.
Press ENTER to proceed if necessary.
Press a/b or c/d to select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
Auto installation
Auto search
Manual adjust
Programme edit
Programme setup
Selecting a preset AV mode
1
2
Press AV MODE.
H Auto installation
You can run auto installation again, even after setting
up the preset channels.
1
2
3
Each time you press AV MODE, the mode
changes.
• You can also switch the mode in the “AV mode”
menu on the “Picture” and “Audio” menu screen.
Selected item
Description
STANDARD
For a highly defined image in a normally
bright room.
MOVIE
For a movie.
GAME
For game play.
USER
Allows the user to customise settings as
desired. You can set the mode for each
input source.
DYNAMIC
For a clear-cut image emphasising high
contrast for sports viewing.
DYNAMIC
(FIXED)
Changes the image and sound settings to
the factory preset values. No adjustments
are allowed.
NOTE
• You can select a different AV mode item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for VIDEO input.)
1
2
Repeat steps 1 and 2 in Auto installation.
Press a/b to select “Manual adjust”, and then
press ENTER.
If you have already set the password, enter it
here.
Press a/b to select your desired item, and
then press c/d to adjust the settings.
Save programme to your desired channel
number. Press R to save.
Sound
system
Select the optimum sound system
(Broadcasting system) to receive. (B/G,
D/K, I, M)
Colour
system
Select the optimum colour system to
receive. (PAL, SECAM, NTSC)
Current CH
Select the channel you want to edit.
• Selected channel will be automatically
Search
Press a/b to select the desired language
listed on the screen, and then press ENTER.
You do not need to do anything during the auto
search. Press MENU to exit.
TV channel settings
You can reconfigure the TV channel settings
automatically or manually using Auto search,
Manual adjust or Programme edit.
H Auto search
Use this menu to add new services automatically
after “Auto installation” has been completed.
Auto search will memorise channels available at that
time.
1
2
Repeat steps 1 and 2 in Auto installation.
Press a/b to select “Auto search”, and then
press ENTER.
If you have already set the password, enter it
here.
• See page 10 for setting a password.
Press 5 to lock the selected channel.
Press 5 again to unlock the locked channel.
Start searching from current channel.
• Instead of pressing c/d to adjust the
Picture menu
frequency, you can set by directly entering the
frequency number of the channel with 0 — 9.
Press R to save.
Fine-tune
AV mode
Picture adjust
Tune the frequency of the stored channel
to your desired position.
• Adjust while checking the background
Advanced
Wide mode
Reset
picture as a reference.
Press R to save.
• See page 10 for setting a password.
4
(Lock)
5
You can block the viewing of any selected channel.
Password must be set first to allow “ ” to
function.
reflected in the background.
” (Programme setup).
Press a/b to select “Auto installation”, and
then press ENTER.
If you have already set the password, enter it
here.
(Skip)
4
Channels with “Skip” set to “On” are passed
over when using CHr/s even if selected while
watching the image from the TV.
Press 4 to skip the selected channel.
Press 4 again to cancel the skip.
Description
Storage to
[1~99]
Press MENU and the MENU screen displays.
Press c/d to select “
3
(Sort)
Channel positions can be sorted freely.
Press 3 to select the channel you want to move.
Press a/b to move it to the desired position, and
then press 3 again or ENTER to save.
• See page 10 for setting a password.
3
Item
NOTE
“AV mode” gives you several viewing options to
choose from to best match the system environment,
which can vary due to factors like room-brightness,
type of programme watched or the type of image
input from external equipment.
H Manual adjust
You can set some channel items manually.
Programme setup
• HOME mode: Settings are optimised for normal home
viewing and energy efficiency.
• STORE mode: Settings are designed for maximum impact
in retail store displays.
• To change the STORE mode to HOME mode, please refer
to page 10 to reset the unit.
(Label)
2
When a TV channel sends its network name, the
“Auto installation” detects the information and
assigns a name to it. However, you can change
channel names individually.
Maximum 5 alphanumerics can be input.
Press 2 to start labelling.
Press a/b/c/d to select a character,
and then press 2 again or ENTER to save.
Programme setup (Continued)
Menu operation
Picture
NOTE
• The frequency shown below the On-Screen Display shows
the real-time frequency of the displayed channel.
H Programme edit
Use this menu to set up a channel individually.
1
2
Repeat steps 1 and 2 in Auto installation.
3
Press a/b to select the channel you want to
edit, and then press 1 to 5 on the remote control
if necessary or press RETURN to exit.
Press a/b to select “Programme edit”, and
then press ENTER.
• As you toggle down the channels, each channel is
immediately reflected in the background when you
press ENTER.
1
(Erase programme)
Channels can be erased individually.
Press 1 to erase the selected channel.
H Picture adjust
Adjusts the picture to your preference with the
following picture settings.
Selected item
c button
d button
Backlight
The screen dims
The screen
brightens
Contrast
For less contrast
For more contrast
Brightness
For less brightness For more
brightness
Colour
For less colour
intensity
Tint
Skin tones become Skin tones
reddish
become greenish
Sharpness
For less sharpness For more
sharpness
For more colour
intensity
• See page 10 for setting a password.
You do not need to do anything during the auto
search. Press MENU to exit.
7
LC-32LE155M_EN_F895.indd 4
8
6/24/2013 3:29:11 PM
Picture menu (Continued)
NOTE
• “Picture adjust” cannot be changed during “DYNAMIC
(FIXED)” mode.
H Advanced
This TV provides various advanced functions for
optimising the picture quality.
NOTE
• You can also select an item by pressing WIDE on the
remote control unit.
• Some picture sizes may not be displayable depending on
the input signal.
• “Auto” and “Original” can be selected only during video
playback in “Movie mode” of USB Media Player.
ECO menu (Continued)
H No operation off
You can set the TV to automatically power off when
no TV operation is performed for more than 3 hours.
(30 min., 3 hr., Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
Audio menu
Setup menu
Active contrast
Automatically adjusts the contrast of an image
according to the scene. (On, Off)
AV mode
Sound adjust
Surround
Reset
DNR (Digital Noise Reduction)
Reduces noise on screen and produces a clearer
video image. (Off, High, Low, Auto)
4
Child lock
Input label
HDMI auto view
Language
Identification
Reset
Audio
NOTE
• For resetting all “Picture adjust” items to factory preset
values, press a/b to select “Reset”, press ENTER, press
a/b to select “Yes”, and then press ENTER.
H Wide mode
You can manually select the size of a picture
appeared on your screen.
Selectable picture size varies with the type of signal
received.
Press a/b while the wide mode menu displays on
the screen.
• As you toggle down the options, each mode is immediately
reflected on the TV.
Selected item
Normal
Description
For 4:3 “standard” pictures. A side bar
appears on each side.
Zoom 14:9
For 14:9 letterbox pictures. A thin side
bar appears on each side, and you may
also see bars on the top and bottom with
some programmes.
Panorama
In this mode the picture is progressively
stretched toward each side of the screen.
Full
For 16:9 squeeze pictures.
Cinema 16:9
For 16:9 letterbox pictures. Bars may
appear on the top and bottom with some
programmes.
Cinema 14:9
For 14:9 letterbox pictures. Bars may
appear on the top and bottom with some
programmes.
Dot by Dot
Display an image with the same number
of pixels on the screen (only when
receiving 1080i / 1080p signal).
Auto
Keeps the original aspect ratio and
enlarges the picture as much as possible.
Original
Keeps the original aspect ratio and size.
Setup
c button
d button
Treble
For weaker treble
For stronger treble
Bass
For weaker bass
For stronger bass
Balance
1
2
3
Press MENU and the MENU screen displays.
4
Press a/b to select an input, and then
press a/b to select a desired alphanumeric.
Maximum 6 alphanumerics can be input.
Press c/d to select “
” (Setup).
Press a/b to select “Input label”, and then
press ENTER.
Press c/d to move to the desired alphanumeric
position.
To exit, press ENTER.
If the wrong alphanumeric is entered, select [ ]
to clear.
NOTE
H Sound adjust
Selected item
H Input label
You can assign each input source a label as you prefer
Decrease audio
from the right
speaker
Decrease audio
from the left
speaker
H Surround
When you set to “On”, you can enjoy surround
sound, the same as if you were in a movie theatre.
(On, Off)
NOTE
• For resetting all “Sound adjust” items to the factory preset
values, press a/b to select “Reset”, press ENTER, press
a/b to select “Yes”, and then press ENTER.
ECO menu
H Child lock (TV input mode only)
Allows you to use a password to protect certain
settings from being accidentally changed.
Setting a password
1
2
Repeat steps 1 and 2 in Menu operation.
3
If you have already set the password, enter it
here.
4
Press a/b to select “Change password”, and
then press ENTER.
5
Enter the 4-digit number as a password using
0 — 9.
6
Enter the same 4-digit number as in step 5 to
confirm.
Press a/b to select “Child lock”, and then
press ENTER.
NOTE
• To view a locked channel, you must enter a password.
When you select a locked channel, “Child lock has been
activated” is displayed.
• Press ENTER to display the password input window.
No signal off
No operation off
• You cannot change Input label for TV input mode.
H HDMI auto view (HDMI input mode only)
Selected item
Enable/
Disable
Description
Set whether or not to use the Auto
Selection of WIDE MODE based on signal
recognition received from the HDMI
signal.
H Language
Select from among 10 languages: English, Simplified
Chinese, Arabic, French, Portuguese, Russian,
Persian, Thai, Vietnamese and Indonesian.
H Identification
You can check the current version of the software on
the screen.
H Reset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
NOTE
• If you execute “Reset”, all the settings such as “Picture”,
“Audio” and “Programme setup” will be reset to the factory
preset values.
Clearing the password
Allows you to clear your password.
ECO
H No signal off
You can set the TV to automatically power off in
about 15 minutes after the TV goes into a state of
receiving no programme signals. (Enable, Disable)
1
2
Repeat steps 1 to 3 in Setting a password.
3
Press c/d to select “Yes”, and then press
ENTER.
Press a/b to select “Clear password”, and
then press ENTER.
• Five minutes before the power shuts down, the remaining
time displays every minute.
NOTE
• When a TV programme finishes, and the TV receives signal
input, this function may not operate.
9
LC-32LE155M_EN_F895.indd 5
10
6/24/2013 3:29:11 PM
Option menu
4
Audio output select
Input select
Auto volume
Audio only
Colour system
Demo
System data
H Auto volume
Different sound sources, fairly often do not have the
same volume level, for example the changing from
movie to the advertisements. Auto volume solves this
problem and equalises the volume levels. (On, Off)
H Audio only
When listening to music from a music programme,
you can set the display off and enjoy audio only.
Selected item
Option
H Audio output select
You can select which device is used for outputting
audio.
Option
Description
Headphone
Output audio through headphones.
Audio out
Output audio through an A/V receiver or
surround audio controller.
NOTE
• If you select “Headphone” when a cable is inserted in the
AUDIO output terminal, the TV speakers are muted and all
Audio menu items cannot be adjusted.
• If you select “Audio out”, sound via the AUDIO output
terminal is not adjustable and constantly outputs.
Regarding the headphone jack
• Use headphones with a stereo mini plug ( 3.5 mm).
• Be sure to unplug headphones from the jack when they
are not in use.
Volume display when headphones are plugged in
30
Description
On
Audio is output without screen image.
Off
Both screen images and audio are
output.
NOTE
• When you make operations that change the picture on the
TV such as by changing the input source, the Audio only
function is set to “Off”.
H Colour system
You can change the colour system to one that is
compatible with the image on the screen. (Auto,
PAL, SECAM, NTSC 3.58, NTSC 4.43, PAL-60)
1
Press COLOUR ADJ. (FREEZE), the moving
image will be captured and colour adjustment
screen displays.
2
Press a/b/c/d to adjust the colour to your
desired setting.
Description
a
White with greenish tone.
b
White with reddish tone.
c
White with bluish tone.
d
White with yellowish tone.
R
Reveal/hide the setting screen.
G
Set adjustment to last user setting.
B
Close the setting screen and unfreeze
image.
ENTER
Timer
Press TIMER to set the Sleep Timer or a Reminder
for an activity.
H Sleep Timer
This function is conveniently used when, for instance,
going to bed while watching TV.
(Off, 0 hr. 30 min., ……, 2hr. 30 min.)
H (Reminder)
This function is to set a reminder for an activity.
Press a/b or ENTER to set.
NOTE
• If you turn off the TV, the counter will be reset.
• Timer function does not work in USB mode.
Save/exit setting.
NOTE
NOTE
• If “Auto” is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
• “Colour system” is selectable only when inputting a
composite signal.
H Demo
When “Demo” is set to “On”, after all the settings are
completed, the Demo screen is displayed if there is
no operation for several minutes. (On, Off)
H System data
This function allows you to update the TV to the
latest software using a USB device. You must
update the software through the USB terminal.
• The colour adjustment screen and still image will
automatically goes out after 30 minutes.
• Freeze/Colour adjustment function does not work in USB
Photo/Movie playback. It works for HDMI and composite/
component.
ECO mode
This function enables you to reduce the backlight
brightness in order to decrease the power
consumption and increase the backlight life span as
shown in the following table.
Selected item
• AUDIO output terminal is also used for headphones.
Reduce the volume before using headphones.
Overwhelming sound may damage your hearing.
H Input select
For setting the signal type of external equipment.
INPUT2
Allows you to adjust the colour tone of a still image.
Button
CAUTION
Input source
Colour adjustment and still image
Description
ECO 1
Reduces the backlight brightness.
ECO 2
Reduces the backlight brightness more
than “ECO 1”.
ECO off
Normal setting of backlight brightness.
ECO status will be displayed on the channel
information window.
Selectable item
Component, Video
11
LC-32LE155M_EN_F895.indd 6
12
6/24/2013 3:29:11 PM
You can select the duration for each photo to
display, and also the duration for the slideshow to
play.
USB Media Player
H Selecting modes
USB Media Player (Continued)
Control panel for photo/music/movie mode operations
Duration for photos to display
3 seconds
5 seconds
10 seconds
• Press B to display the control panel below.
1 minute
USB
Button/menu
Duration for slideshow to play
1 hour
Photo mode
Music mode
3 hour
ENTER
Continuous
• The TV will automatically power off after the
selected playtime ends.
Movie mode
NOTE
1
2
3
4
Press INPUT to select the “USB” mode or the
TV will automatically switch to the USB mode
when a USB device is connected to the TV.
Press c/d to select “Photo mode”, “Music
mode” or “Movie mode”, and then press
ENTER.
Press c/d to select your USB directory, and
then press ENTER.
Press a/b/c/d to select the desired folder,
and then press ENTER.
NOTE
• “Wide mode” is fixed during “Photo mode” and “Music mode”.
• Depending on the USB device, the TV may not be able to
recognise the contained data.
• Use only alphanumeric characters for naming files.
• A file name with more than 10 characters may not be
displayed all (depending on the character set).
• Files in USB 1.1 devices may not be played properly.
• Operation using USB hubs is not guaranteed.
• The compatibility of USB HDDs may not be guaranteed.
• Multi drive USB is not supported.
• Background music will autoplay during a slideshow only if the
music file is located in the same folder with the photo files.
• If you want to stop the photo slideshows, press RETURN to
exit.
List of files compatible with USB mode
USB device/
File system
USB Memory / FAT/FAT32
Photo file format
JPEG (.jpg) (DCF2.0 compliant).
Progressive format of jpeg files
are not supported.
Music file format
(Files may not be
playable depending
on the bitrate)
MP3 (.mp3) Bitrate: 32 k, 40 k,
48 k, 56 k, 64 k, 80 k, 96 k,
112 k, 128 k, 160 k, 192 k, 224 k,
256 k, 320 kbps
Sampling frequency: 32 k, 44.1 k,
48 kHz
Video file format
File extension
Container
Video
*.avi
AVI
XviD
H.264
MPEG2
*.mkv
MKV
PHOTO slideshow
C:\Photo
1/2
WxH:
1300 X 822
Size:
789 KBytes
Date:
2011 / 08 / 04
Time:
10 : 12 :12
Back
Fireworks.jpg
Ski Action.jpg
Switzerland.jpg
Ski Action.jpg Japan-hokkaid..
H.264
MPEG2
MPEG1
*.mp4
MP4
XviD
H.264
*.vob
VOB
MPEG2
*.mpg/*.mpeg
PS
MPEG2
MPEG1
*.rm/*.rmvb
RM
RM codec
*.ts/*.trp/*tp
TS
H.264
MPEG2
*.dat
DAT
MPEG2
MPEG1
Island.jpg
When you press PHOTO, the TV screen will
automatically play the photo slideshow.
G/
• If there is no USB drive, the TV will switch to Selecting
modes screen.
• Photo slideshows will autoplay only for the photos located
on the top layer of USB drive. To enable autoplay for
photos located in a subfolder, you need to manually select
the subfolder, and then press PHOTO.
Photo
Music
Movie
When selecting a folder icon: Enter this
directory.
When selecting a thumbnail:
Play the selected file.
Description



Play/Pause.



Rewind. Each time you press rewind, the speed
will change (2x, 4x, 8x, 16x).
–


Fast-forward. Each time you press fast-forward,
the speed will change (2x, 4x, 8x, 16x).
–


Play the previous file.



Play the next file.



Stop playback and return to the list of files.



Loop. Each time you press ENTER, the mode
will switch between Repeat t No repeat.



Play/cancel the background music.

–
–
Mute. Press ENTER to toggle between mute
and unmute.
–

–
Two loop. Press ENTER to set the current
playback time starting point. Press ENTER to
set the loop end of the current playing time and
start loop playback. Press ENTER button to
cancel the loop.
–
–

Show playlists. Select a file from the playlists to
start playback.



Display information about the file.



Slow-forward.
Each time you press slow-forward, the speed
will change.
–
–

Single frame-forward.
Each time you press ENTER, the picture will
change to the next still picture.
–
–

Set time for music/movie playback.
–


Rotate clockwise 90º.

–
–
Rotate counterclockwise 90º.

–
–
Zoom in an image. Select to display larger
image size.

–
–
Zoom out an image. Select to display smaller
image size.

–
–
Pan image up, down, left or right after you
zoom in. Press ENTER to exit.

–
–
Select playback length of a slideshow.

–
–
Select photo display interval.

–
–
NOTE
• Files in folder which are not related to a selected mode cannot be accessed.
• “Unsupported file” alert will pops up for a selected file of invalid format.
13
LC-32LE155M_EN_F895.indd 7
14
6/24/2013 3:29:11 PM
Specifications
Appendix
Troubleshooting
The problems described below are not always caused by malfunctions. Check the TV again before having the
TV serviced.
Problem
• No power.
Possible Solution
• Check if you pressed POWER on the remote control unit. (See page 6.)
If the indicator on the TV lights up red, press POWER.
• Is the AC cord disconnected?
• Has the power been turned on? (See page 6.)
• Unit cannot be operated.
• External influences such as lightning, static electricity, etc., may cause improper
operation. In this case, operate the unit after first turning the power off the TV or
unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
• Remote control unit does not
operate.
•
•
•
•
• Picture is cut off.
• Strange colour, light colour, or
dark, or colour misalignment.
• Power is suddenly turned off.
• No picture.
• No sound.
• The TV sometimes makes a
cracking sound.
Model LC-32LE155M
Item
LC-39LE155M
Screen size
80 cm
98 cm
Resolution
1,049,088 pixels (1366 g 768)
2,073,600 pixels (1920 g 1080)
Video Colour System
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV
TV-Standard
Function
Receiving VHF/UHF
Channel
CATV
43.25—863.25 MHz
PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1 NTSC: M
44.25—863.25 MHz
S1—S41ch (including Hyperband)
TV-Tuning System
Auto Preset 99 ch
STEREO/BILINGUAL
NICAM: B/G, I, D/K A2 stereo: B/G
Viewing angles
H : 178º V : 178º
Audio amplifier/Speakers
5 W g 2 / 3 g 10 cm 2pcs
Terminals
Antenna input
UHF/VHF 75 q DIN type
• Are screen mode adjustments such as picture size made correctly?
(See pages 8 to 9.)
INPUT 1
HDMI (HDMI input), PC input
INPUT 2
VIDEO in, AUDIO in, COMPONENT in
•
•
•
•
INPUT 3
VIDEO in, AUDIO in
OUTPUT
AUDIO out, Headphone (
USB
USB
Is battery inserted with polarity (e, f) aligned? (See page 5.)
Is battery worn out? (Replace with new battery.)
Are you using it under strong or fluorescent lighting?
Is a fluorescent light shining on the remote control sensor?
Adjust the picture tone. (See pages 8 to 9.)
Is the room too bright? The picture may look dark in a room that is too bright.
Check the colour system setting. (See pages 8, 11.)
Check the HDMI auto view setting. (See page 10.)
H : 176º V : 176º
3.5 mm stereo)
• The unit’s internal temperature has increased.
Remove any objects blocking the vent or clean.
• Check the ECO setting. (See pages 9 to 10.)
• Is the sleep timer set? (See page 12.)
OSD language
English/Simplified Chinese/Arabic/French/Portuguese/Russian/Persian/Thai/
Vietnamese/Indonesian
Power Requirement
AC 110—240 V, 50/60 Hz
•
•
•
•
Power Consumption
45 W (1.0 W Stand by)
Is the connection to external equipment correct? (See page 4.)
Is the “Picture adjust” correct? (See page 8.)
Is the antenna connected properly? (See page 3.)
Is “On” selected in “Audio only”? (See page 11.)
Dimensions
57 W (1.0 W Stand by)
without stand
745 (W) g 465 (H) g 81 (D) mm
898 (W) g 553 (H) g 81 (D) mm
with stand
745 (W) g 545 (H) g 210 (D) mm
898 (W) g 633 (H) g 236 (D) mm
• Is the volume too low? (See page 5.)
Weight
5.6 kg (without stand) / 6.3 kg (with stand) 6.3 kg (without stand) / 7.0 kg (with stand)
• This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to changes in temperature. This does not affect the TV’s
performance.
Operating Temperature
0°C — 40°C
• As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near
a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: f20°C to e60°C.
CAUTION
• Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or
mounting that results in accident or injury.
• Carefully read the instructions that come with the bracket before beginning work.
Clearing the password
1
2
3
4
Repeat steps 1 to 2 in Setting a password. (See page 10.)
The password input screen displays.
If you enter “3001” using 0 – 9, the “Child lock” setting menu will be displayed.
Enter the 4-digit number as a password using 0 – 9. The new password is now set.
15
LC-32LE155M_EN_F895.indd 8
16
6/24/2013 3:29:11 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement