user`s manual - icon service
www.proform.com
Model No. PFTL59510.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
QUESTIONS?
If you have questions, or if parts
are damaged or missing, DO NOT
CONTACT THE STORE; please
contact Customer Care.
IMPORTANT: Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer Care.
CALL TOLL-FREE:
1-888-533-1333
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.proformservice.com
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
USER’S MANUAL
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
EXERCISE GUIDELINES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
PART LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
EXPLODED DRAWING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
ORDERING REPLACEMENT PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
LIMITED WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
WARNING DECAL PLACEMENT
This drawing shows the locations of the
warning decals. If a decal is missing or
illegible, call the telephone number on the
front cover of this manual and request a
free replacement decal. Apply the decal in
the location shown. Note: The decals may
not be shown at actual size.
PROFORM is a registered trademark of ICON IP, Inc.
iPod, iPod nano, iPod touch, and iTunes are registered trademarks of Apple Inc.,
registered in the U.S. and other countries. iPod® is not included.
Nike is a registered trademark of NIKE, Inc. and its affiliated companies.
2
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your treadmill before using your treadmill. ICON
assumes no responsibility for personal injury or property damage sustained by or through the use of
this product.
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or persons
with pre-existing health problems.
other electrical devices, except for low-power
devices such as cell phone chargers, into
the surge suppressor or into an outlet on the
same circuit.
2. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
12.Use only a surge suppressor that meets all of
the specifications described on page 14. To
purchase a surge suppressor, see your local
PROFORM dealer, call the telephone number
on the front cover of this manual, or see your
local electronics store.
3. Use the treadmill only as described.
4. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
13.Failure to use a properly functioning surge
suppressor could result in damage to the
control system of the treadmill. If the control
system is damaged, the walking belt may
slow, accelerate, or stop unexpectedly, which
may result in a fall and serious injury.
5. Place the treadmill on a level surface, with
at least 8 ft. (2.4 m) of clearance behind it
and 2 ft. (0.6 m) on each side. Do not place
the treadmill on any surface that blocks air
openings. To protect the floor or carpet from
damage, place a mat under the treadmill.
14.Keep the power cord and the surge suppressor away from heated surfaces.
6. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
15.Never move the walking belt while the power
is turned off. Do not operate the treadmill
if the power cord or plug is damaged, or if
the treadmill is not working properly. (See
TROUBLESHOOTING on page 25 if the treadmill is not working properly.)
7. Keep children under age 12 and pets away
from the treadmill at all times.
8. The treadmill should be used only by persons weighing 300 lbs. (136 kg) or less.
16.Read, understand, and test the emergency
stop procedure before using the treadmill
(see HOW TO TURN ON THE POWER on page
16).
9. Never allow more than one person on the
treadmill at a time.
17.Never start the treadmill while you are standing on the walking belt. Always hold the
handrails while using the treadmill.
10.Wear appropriate exercise clothes when
using the treadmill. Do not wear loose
clothes that could become caught in the
treadmill. Athletic support clothes are recommended for both men and women. Always
wear athletic shoes. Never use the treadmill
with bare feet, wearing only stockings, or in
sandals.
18.The treadmill is capable of high speeds.
Adjust the speed in small increments to
avoid sudden jumps in speed.
19.The heart rate monitor is not a medical
device. Various factors, including the user’s
movement, may affect the accuracy of heart
rate readings. The heart rate monitor is
intended only as an exercise aid in determining heart rate trends in general.
11.Plug the power cord into a surge suppressor
(not included), and plug the surge suppressor into an appropriate outlet (see page 14).
To avoid overloading the circuit, do not plug
3
20.Never leave the treadmill unattended while it
is running. Always remove the key, unplug
the power cord, and press the power switch
into the off position when the treadmill is not
in use. (See the drawing on page 5 for the
location of the power switch.)
25.
21.Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 6, and HOW TO FOLD
AND MOVE THE TREADMILL on page 24.)
You must be able to safely lift 45 lbs. (20 kg)
to raise, lower, or move the treadmill.
DANGER: Always unplug the power
cord immediately after use, before cleaning the treadmill, and before performing the
maintenance and adjustment procedures
described in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service representative only.
26.This treadmill is intended for in-home use
only. Do not use this treadmill in a commercial, rental, or institutional setting.
22.When folding or moving the treadmill, make
sure that the storage latch is holding the
frame securely in the storage position.
27.Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
23.Never insert any object into any opening on
the treadmill.
24.Inspect and properly tighten all parts of the
treadmill regularly.
SAVE THESE INSTRUCTIONS
4
BEFORE YOU BEGIN
Thank you for selecting the revolutionary PROFORM®
PERFORMANCE 400 treadmill. The PERFORMANCE
400 treadmill offers an impressive selection of features
designed to make your workouts at home more enjoyable and effective. And when you’re not exercising, the
unique treadmill can be folded up, requiring less than
half the floor space of other treadmills.
reading this manual, please see the front cover of this
manual. To help us assist you, please note the product
model number and serial number before contacting us.
The model number and the location of the serial number decal are shown on the front cover of this manual.
Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.
For your benefit, read this manual carefully before
using the treadmill. If you have questions after
Tray
Console
Heart Rate
Monitor
Handrail
Key/Clip
Upright
Walking Belt
Power Switch
Foot Rail
Power Cord
Platform Cushion
Idler Roller
Adjustment Bolts
5
ASSEMBLY
To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of
the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex keys and your own Phillips screwdriver
adjustable wrench
, needlenose pliers
, and scissors
.
,
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the
key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the
quantity needed for assembly. Note: Some small parts may have been preassembled. To avoid damaging
parts, do not use power tools for assembly. Extra hardware may be included.
1/4" Star
Washer (12)–8
5/16" Star
Washer (13)–4
#8 x 3/4" Screw
(1)–6
5/16" x 1"
Bolt (4)–6
3/8" Star
Washer (11)–6
Base Foot
Spacer (94)–2
#10 x 3/4" Screw
(2)–4
#8 x 1" Tek Screw
(5)–4
3/8" x 1 1/2" Bolt (14)–2
3/8" x 4" Bolt (7)–4
6
3/8" Nut (10)–5
1/4" x 1/2"
Bolt (9)–4
3/8" x 2" Bolt (8)–5
1.
Make sure that the power cord is unplugged.
1
Hole
87
With the help of a second person, carefully tip the
treadmill onto its left side. Partially fold the Frame
(55) so that the treadmill is more stable; do not
fully fold the Frame yet.
Cut the shipping tie securing the Upright Wire
(87) to the Base (95). Locate a plastic tie in the
indicated hole in the Base, and use the tie to pull
the Upright Wire out of the hole.
90
95
55
Attach two Base Feet (90) to the Base (95) in the
locations shown with two #8 x 1" Tek Screws (5)
and two Base Foot Spacers (94).
94
90 5
90
Then, attach the other two Base Feet (90) with
two #8 x 1" Tek Screws (5).
5
90
5
94
2.
See the inset drawing. Cut the plastic tie near
the Upright Wire (87).
2
89
Plastic Tie
Attach a Wheel (96) to the Base (95) with a 3/8"
x 2" Bolt (8) and a 3/8" Nut (10). Do not overtighten the Nut; the Wheel must turn freely.
5
87
Press a Base Cap (89) into the Base (95).
8
96
95
10
Cut
87
7
3.Identify the Right Upright (85), which is marked
with a "Right" sticker. Hold the Right Upright
near the Base (95) as shown.
3
85
See the inset drawing. Tie the wire tie in the
Right Upright (85) securely around the end of
the Upright Wire (87). Then, pull the other end
of the wire tie until the Upright Wire is routed
completely through the Right Upright.
87
87
Wire Tie
95
85
87
4.Hold the Right Upright (85) against the Base
(95). Be careful not to pinch the Upright
Wire (87). Insert two 3/8" x 4" Bolts (7) with two
3/8" Star Washers (11) and a 3/8" x 1 1/2" Bolt
(14) with a 3/8" Star Washer (11) into the Right
Upright.
Wire
Tie
4
7
85
14
11
11
Partially tighten the 3/8" x 4" Bolts (7) until the
heads of the Bolts touch the Right Upright (85);
do not fully tighten the Bolts yet. Partially
tighten the 3/8" x 1 1/2" Bolt (14).
87
95
8
5.With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the
Frame (55) so that the treadmill is more stable;
do not fully fold the Frame yet.
5
89
Attach a Wheel (96) to the Base (95) with a 3/8"
x 2" Bolt (8) and a 3/8" Nut (10). Do not overtighten the Nut; the Wheel must turn freely.
8
Press a Base Cap (89) into the Base (95).
95
96
6.Hold the Left Upright (84) against the Base (95).
Insert two 3/8" x 4" Bolts (7) with two 3/8" Star
Washers (11) and a 3/8" x 1 1/2" Bolt (14) with a
3/8" Star Washer (11) into the Left Upright.
6
7
Partially tighten the 3/8" x 4" Bolts (7) until the
heads of the Bolts touch the Left Upright (84);
do not fully tighten the Bolts yet. Partially
tighten the 3/8" x 1 1/2" Bolt (14).
11
ith the help of a second person, tip the treadW
mill so that the Base (95) is flat on the floor.
95
9
14
11
84
10
55
7.Identify the Right Base Cover (91) and the Left
Base Cover (88). Slide the Right Base Cover
onto the Right Upright (85). Slide the Left Base
Cover onto the Left Upright (84).
7
84
85
88
91
8.Remove the tie from the bracket on the Right
Handrail (83). If necessary, press the 5/16" Cage
Nuts (38) back into place.
8
4
Hold the Right Handrail (83) near the Right
Upright (85). Position the Upright Wire (87) on
the Right Handrail as shown.
13
87
38
Tie
83
Set the Right Handrail (83) on the Right Upright
(85). See the inset drawing. Make sure that
the Upright Wire (87) is positioned as shown
and is not pinched.
4
85
Attach the Right Handrail (83) to the Right
Upright (85) with three 5/16" x 1" Bolts (4) and
two 5/16" Star Washers (13) as shown. Do not
tighten the Bolts yet.
87
Attach the Left Handrail (not shown) in the
same way. Note: There is no wire on the left
side.
85
10
9.Set the console assembly face down on a soft
surface to avoid scratching the console assembly. Remove the two #8 x 3/4" Screws (1). Next,
lift off the Crossbar (107).
9
1
107
Console
Assembly
10.IMPORTANT: To avoid damaging the
Crossbar (107), do not use power tools and
do not overtighten the #10 x 3/4" Screws (2).
10
2
12
Orient the Crossbar (107) as shown. Attach the
Crossbar to the Handrails (82, 83) with four #10
x 3/4" Screws (2) and four 1/4" Star Washers
(12). Start all four Screws, and then tighten
them.
82
107
2
12
83
11
11.With the help of a second person, hold the console assembly near the Right Handrail (83).
11
Connect the Upright Wire (87) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER. Then, remove the wire tie from
the Upright Wire.
Console
Assembly
Console
Wire
87
Console
Wire
87
Wire
Tie
12.Set the console assembly on the Left Handrail
(82) and the Right Handrail (83). Be careful not
to pinch any wires. Insert the excess Upright
Wire (87) into the Right Upright (85).
Attach the console assembly with six #8 x 3/4"
Screws (1) and four 1/4" x 1/2" Bolts (9) with four
1/4" Star Washers (12). Start all six Screws
and all four Bolts, and then tighten them.
83
12
Console
Assembly
87
12
83
82
12
See steps 4 and 6. Fully tighten the four 3/8" x
4" Bolts (7) and the two 3/8" x 1 1/2" Bolts (14).
9
See step 8. Fully tighten the six 5/16" x 1" Bolts
(4).
1
85
12
1
1
9
13.Raise the Frame (55) to the position shown.
Have a second person hold the Frame until
this step is completed.
13
55
Orient the Storage Latch (51) so that the large
barrel and the latch knob are oriented as shown.
10
8
Attach the Latch Bracket (6) and Storage Latch
(51) to the Base (95) with two 3/8" x 2" Bolts (8)
and two 3/8" Nuts (10).
51
Latch Knob
Attach the upper end of the Storage Latch (51)
to the bracket on the Frame (55) with a 3/8" x
2" Bolt (8) and a 3/8" Nut (10). Note: It may be
necessary to move the Frame back and forth to
align the Storage Latch with the bracket.
Large
Barrel
6
Lower the Frame (55) (see HOW TO LOWER
THE TREADMILL FOR USE on page 24).
10
95
8
14.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is
used to adjust the walking belt (see pages 26 and 27).
13
OPERATION AND ADJUSTMENT
HOW TO CONNECT THE POWER CORD
nominal 120-volt circuit capable of carrying 15 or
more amps. To avoid overloading the circuit, do
not plug other electrical devices, except for lowpower devices such as cell phone chargers, into
the surge suppressor or into an outlet on the same
circuit. IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets and may not be
compatible with AFCI-equipped outlets.
Use a Surge Suppressor
Your treadmill, like other electronic equipment, can be
damaged by sudden voltage changes in your home’s
power. Voltage surges, spikes, and noise interference can result from weather conditions or from other
appliances being turned on or off. To decrease the
risk of damaging the treadmill, always use a surge
suppressor with the treadmill. To purchase a surge
suppressor, see precaution 12 on page 3.
1
Grounded Outlet
Grounding Pin
Use only a surge suppressor that is UL 1449 listed as a
transient voltage surge suppressor (TVSS). The surge
suppressor must have a UL suppressed voltage rating
of 400 volts or less and a minimum surge dissipation of
450 joules. The surge suppressor must also be electrically rated for 120 volts AC and 15 amps. There must
be a monitoring light on the surge suppressor to indicate whether it is functioning properly. Failure to use a
properly functioning surge suppressor could result
in damage to the control system of the treadmill
and serious injury to users.
Grounding Pin
Surge
Suppressor
Plug in the Power Cord
A temporary
adapter may
be used to
connect the
surge suppressor to
a 2-pole
receptacle
if a properly
grounded
outlet is not
available.
The treadmill must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. The treadmill power cord has a plug with a
grounding pin (see drawing 1 on this page).
DANGER: Improper connection
of the power cord increases the risk of electric shock. Do not modify the plug—if it will
not fit an outlet, have a proper outlet installed
by a qualified electrician. If you are unsure
whether the treadmill is properly grounded,
contact a qualified electrician.
2
2-pole Receptacle
Adapter
Lug
Metal
Screw
The lug or wire extending from the adapter must
be connected with a metal screw to a permanent
ground such as a properly grounded outlet box cover.
Some 2-pole receptacle outlet box covers are not
grounded. Before using an adapter, contact a qualified electrician to determine whether the outlet box
cover is grounded. The temporary adapter should
be used only until a properly grounded outlet can
be installed by a qualified electrician.
Plug the power cord into a surge suppressor, and plug
the surge suppressor into an appropriate outlet that is
properly installed and grounded in accordance with all
local codes and ordinances. The outlet must be on a
14
CONSOLE
DIAGRAM
FEATURES OF THE CONSOLE
monitor your progress toward your fitness goals. To
purchase a SYNC at any time, call the telephone
number on the front cover of this manual.
The treadmill console offers an impressive array of
features designed to make your workouts more effective and enjoyable. When you use the manual mode,
you can change the speed and incline of the treadmill
with the touch of a button. As you exercise, the console
will display instant exercise feedback. You can even
measure your heart rate using the handgrip pulse sensor.
You can even listen to your favorite workout music or
audio books with the console’s stereo sound system
while you exercise. The treadmill has been designed
specifically to work with iPod and has been certified by
the developer to meet Apple performance standards.
To turn on the power, see page 16. To use the manual mode, see page 16. To use an onboard workout,
see page 19. To use an iFit Live workout, see page
20. To use a PROFORM SYNC, see page 21. To use
the information mode, see page 22. To use the stereo sound system, see page 23.
In addition, the console features fifteen onboard workouts—five calorie workouts, five timed workouts, and
five distance workouts. Each workout automatically
controls the speed and incline of the treadmill as it
guides you through an effective exercise session.
The console also features an iFit Live mode that
Note: The console can display speed and distance
enables the treadmill to communicate with your wirein either miles or kilometers. To find which unit of
less network through an optional iFit Live module.
measurement is selected, see THE INFORMATION
With the iFit Live mode, you can download personalMODE on page 22. For simplicity, all instructions in this
ized workouts, create your own workouts, track your
manual refer to miles.
workout results, race against other runners, and
access many other features. To purchase an iFit
IMPORTANT: If there are sheets of plastic on the
Live module at any time, go to www.iFit.com or call
console, remove the plastic. To prevent damage
the telephone number on the front cover of this ETPF59510
to the walking platform, wear clean athletic shoes
(PFTL59510)
manual.
while using the treadmill. The first time you use
the treadmill, observe the alignment of the walking
You can also connect to Nikeplus.com through the
belt, and center the walking belt if necessary (see
optional PROFORM SYNC. With the SYNC, you
page 27).
can use an array of tools to analyze your results and
15
HOW TO TURN ON THE POWER
HOW TO USE THE MANUAL MODE
IMPORTANT: If the treadmill has been exposed to
cold temperatures, allow it to warm to room temperature before you turn on the power. If you do
not do this, you may damage the console displays
or other electrical components.
1.Insert the key into the console.
Plug in the power cord (see
page 14). Next, locate the
power switch on the treadmill frame near the power
cord. Press the power switch
into the reset position.
Press the Manual button on the console. If you are
not connected to iFit Live, the manual mode will be
selected automatically.
See HOW TO TURN ON THE POWER at the left.
2.Select the manual mode.
Reset
3. Start the walking belt.
To start the walking belt, press the Start button, the
Speed increase button, or one of the speed buttons
numbered 1 through 10.
IMPORTANT: The console features a display demo
mode, designed to be used if the treadmill is displayed in a store. If the displays light as soon as
you plug in the power cord and press the power
switch into the reset position, the demo mode is
turned on. To turn off the demo mode, hold down
the Stop button for a few seconds. If the displays
remain lit, see THE INFORMATION MODE on page
22 to turn off the demo mode.
If you press the Start button or the Speed increase
button, the walking belt will begin to move at 1
mph. As you exercise, change the speed of the
walking belt as desired by pressing the Speed
increase and decrease buttons. Each time you
press one of the buttons, the speed setting will
change by 0.1 mph; if you hold down the button,
the speed setting will change in increments of 0.5
mph. Note: After you press the button, it may take
a moment for the walking belt to reach the selected
speed setting.
Next, stand on the
foot rails of the
treadmill. Find the
Key
clip attached to the
Clip
key and slide the
clip onto the waistband of your clothes.
Then, insert the key
into the console.
After a moment, the
displays will light. IMPORTANT: In an emergency,
the key can be pulled from the console, causing
the walking belt to slow to a stop. Test the clip by
carefully taking a few steps backward; if the key is
not pulled from the console, adjust the position of
the clip.
If you press one of the numbered speed buttons,
ETPF59510
the walking
belt will gradually change speed until
(PFTL59510)
it reaches the selected speed setting. To select a
speed setting that includes a decimal—such as 3.5
mph—press two numbered buttons in succession.
For example, to select a speed setting of 3.5 mph,
press the 3 button and then immediately press the
5 button.
To stop the walking belt, press the Stop button.
The time will begin to flash in the display. To restart
the walking belt, press the Start button or the
Speed increase button.
16
4. Change the incline of the treadmill as desired.
The Distance/Speed
display—This display
can show the distance
that you have walked
or run. The display will
also show the speed of
the walking belt for a few seconds each time the
speed changes.
he Center display—This display will show workT
out instructions.
To change the incline of the treadmill, press the
Incline increase or decrease button or one of the
incline buttons numbered 0 through 10. Each time
you press one of the buttons, the treadmill will
gradually adjust to the selected incline setting.
5.Follow your progress with the displays.
The matrix—When
you select the manual
mode, the matrix will
display a track that represents 1/4 mile (400­
meters). As you exercise, the indicators around the track will appear in
succession until the entire track appears. The track
will then disappear and the indicators will again
begin to appear in succession.
Press the Home button to return to the start mode
(see THE INFORMATION MODE on page 22 to set
the start mode). If necessary, press the Home button again.
When an iFit Live module is connected to
www.iFit.com, the iFit
Live symbol near the
top of the display will
light.
The Incline/Calories
display—This display will show the
approximate number
of calories you have
burned. The display
will also show the incline of the treadmill for a
few seconds each time the incline of the treadmill
changes.
When a PROFORM
SYNC is connected
to the console, the
Nike+iPod symbol near
the top of the display
will light.
The Time/Pulse display—This display
will show the elapsed
time. The display will
also show your heart
rate when you use the
handgrip heart rate monitor (see step 6 on page
18).
To reset the displays, press the Stop button, remove the key, and then reinsert the key.
17
6. Measure your heart rate if desired.
Before using
the handgrip heart
rate monitor,
remove the
sheets of plastic from the
metal contacts
on the pulse
bar. In addition, make
sure that your
hands are clean.
7.When you are finished exercising, remove the
key from the console.
Step onto the foot rails, press the Stop button, and
adjust the incline of the treadmill to the lowest
setting. The incline must be at the lowest setting or you may damage the treadmill when you
fold it to the storage position. Next, remove the
key from the console and put it in a secure place.
When you are finished using the treadmill, press
the power switch into the off position and unplug
the power cord. IMPORTANT: If you do not do
this, the treadmill’s electrical components may
wear prematurely.
Contacts
To measure your heart rate, stand on the foot
rails and hold the pulse bar with your palms on the
metal contacts; avoid moving your hands. When
your pulse is detected, several dashes will appear
and then your heart rate will be shown. For the
most accurate heart rate reading, continue to
hold the contacts for about 15 seconds.
18
HOW TO USE AN ONBOARD WORKOUT
the displays for a few seconds and the treadmill
will automatically adjust to the new speed and/or
incline setting.
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page 16.
The workout will continue in this way until the last
segment of the profile flashes in the display and the
last segment ends. The walking belt will then slow
to a stop. Note: If you select a distance workout,
the workout will end with a three-minute cool-down
segment.
2. Select an onboard workout.
To select an onboard workout, press the Calorie
button, the Timed button, or the Distance button
repeatedly until the desired workout appears in the
display.
Note: The calorie goal is an estimate of the
number of calories that you will burn during the
workout. The actual number of calories that you
burn will depend on your weight. In addition,
if you manually change the speed or incline of
the treadmill during the workout, the number of
calories you burn will be affected.
When you select an onboard workout, the displays
will show the maximum incline, the duration, the
maximum speed, and the name of the workout. In
addition, a profile of the speed settings of the workout will appear in the matrix. If you select a calorie
workout, the approximate number of calories you
will burn will appear in the name of the workout.
If the speed or incline setting is too high or too low
at any time during the workout, you can manually
override the setting by pressing the speed or incline buttons; however, when the next segment
of the workout begins, the treadmill will automatically adjust to the speed and incline settings for the next segment.
3. Start the workout.
ress the Start button or the Speed increase button
P
to start the workout. A moment after you press the
button, the treadmill will automatically adjust to the
first speed and incline settings of the workout. Hold
the handrails and begin walking. Note: If you select
a distance workout, the exercise session will begin
with a three-minute warm-up segment before the
distance workout begins.
To stop the workout at any time, press the Stop
button. The time will begin to flash in the display.
To resume the workout, press the Start button or
the Speed increase button. The walking belt will
begin to move at 1 mph. When the next segment of
the workout begins, the treadmill will automatically
adjust to the speed and incline settings for the next
segment.
Each workout is divided into segments. One speed
setting and one incline setting are programmed for
each segment. Note: The same speed setting and/
or incline setting may be programmed for consecutive segments.
4. Follow your progress with the displays.
During the workout, the
Current Segment
profile will show your
progress. The flashing
segment of the profile
represents the current
segment of the workout. The height of the
flashing segment indicates the speed setting for
the current segment. At the end of each segment, a
series of tones will sound and the next segment of
the profile will begin to flash. If a new speed and/or
incline setting is programmed for the next segment,
the new speed and/or incline setting will appear in
See step 5 on page 17. The Time/Pulse display
will show the time remaining instead of the elapsed
time.
5. Measure your heart rate if desired.
See step 6 on page 18.
6. W
hen you are finished exercising, remove the
key from the console.
19
See step 7 on page 18.
HOW TO USE AN IFIT LIVE WORKOUT
www.iFit.com. Note: If there are no workouts of
the selected type in your queue, the next workout
in your queue will be downloaded.
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page 16.
When you select an iFit Live workout, the displays
will show the duration of the workout, the distance
you will walk or run, the approximate number of
calories you will burn, and the name of the workout.
If you select a competition workout, the display will
count down to the beginning of the race.
2. Insert the iFit Live module into the console.
o use an iFit Live workout, insert the optional iFit
T
Live module into the module housing on the top
of the console. To purchase an iFit Live module at
any time, go to www.iFit.com or call the telephone
number on the front cover of this manual. You must
have an iFit Live module to use an iFit Live workout.
5. Start the workout.
During some workouts, the voice of an audio
coach will guide you through your workout. You
can select a setting for your audio coach (see THE
INFORMATION MODE on page 22).
Note: To use an iFit Live module, you must have
access to a computer with an internet connection
and a USB port. You will also need an iFit.com
membership. To use an iFit Live module, you must
also have your own wireless network including an
802.11b router with SSID broadcast enabled (hidden networks are not supported).
To stop the workout at any time, press the Stop
button. The time will begin to flash in the display.
To resume the workout, press the Start button or
the Speed increase button. The walking belt will
begin to move at the speed setting for the first segment of the workout. When the next segment of
the workout begins, the treadmill will automatically
adjust to the speed and incline settings for the next
segment.
3. Select a user.
If more than one user is registered, you can switch
users in the iFit Live main screen. Press the increase and decrease buttons next to the Enter button to select a user.
6. Follow your progress with the displays.
4. Select an iFit Live workout.
See step 3 on page 19.
See step 5 on page 17.
To select an iFit Live workout, press one of the iFit
Live buttons. Before a workout will download, you
must add the workout to your queue on www.iFit.
com.
7. Measure your heart rate if desired.
See step 6 on page 18.
8. W
hen you are finished exercising, remove the
key from the console.
Press the iFit Live button to download the next
workout in your queue. Press the My Trainer button, the My Maps button, the World Tour button,
or the Event Training button to download the next
workout of that type in your queue. Press the
Compete button to compete in a race that you
have previously scheduled. For more information
about the iFit Live workouts, please see
See step 7 on page 18.
For more information about the iFit Live mode, go
to www.iFit.com.
20
HOW TO USE A PROFORM SYNC
To use the SYNC, you must have an iPod nano® (4th
or 5th generation) or an iPod touch® (2nd, 3rd, or 4th
generation). You must also have access to a computer
with an internet connection.
The optional PROFORM SYNC enables you to
record your treadmill workout results on your iPod®
(not included). You can then upload your results to
Nikeplus.com, where you can use an array of tools to
analyze your results and monitor your progress toward
your fitness goals. To purchase a SYNC at any time,
call the telephone number on the front cover of this
manual.
For more information about the SYNC, see the instructions included with the SYNC.
21
THE INFORMATION MODE
If a module is connected, the information mode will
also show the following screens:
The console features an information mode that keeps
track of treadmill information and allows you to personalize console settings.
If an iFit Live module, a USB module, or a PROFORM
SYNC is connected, press the decrease button to view
the status of the module. If an iFit Live module is connected, the display will show the word WIFI. If a USB
module is connected, the display will show the word
USB/SD. If a SYNC is connected, the display will show
the word NIKE+.
To select the information mode, hold down the Stop
button while inserting the key into the console, and
then release the Stop button. When the information
mode is selected, the following information will be
shown:
If an iFit Live module or a USB module is connected,
press the decrease button to view the status of the
audio coach voice. To turn on or turn off the audio
coach, press the Enter button.
The Time/Pulse display
will show the total number
of hours the treadmill has
been used.
If an iFit Live module is connected, the information
mode will also show the following screens:
The Distance/Speed
display will show the total
number of miles or kilometers that the walking belt
has moved.
Press the decrease button to view the start mode options. The start mode will appear when you insert the
key into the console or when you press the Home button. Press the Enter button repeatedly to select the
manual mode or the iFit Live mode as the start mode.
The center display will
show the selected unit of
measurement. To change
the unit of measurement,
press the Enter button or
the Speed increase button.
To view distance in miles, select ENGLISH. To view
distance in kilometers, select METRIC.
Press the decrease button to check the wireless statistics. Press the Enter button. The center display
will show the software version number, the network
SSID, the network encryption type, the wireless signal
strength, the IP address of the module, the number of
registered users and their names, and the results of
the DNS lookup.
Press the decrease button next to the Enter button to
view the next screen. The console features a display
demo mode, designed to be used if the treadmill is
displayed in a store. While the demo mode is turned
on, the console will function normally when you plug in
the power cord, press the power switch into the reset
position, and insert the key into the console. However,
when you remove the key, the displays will remain
lit, although the buttons will not function. If the demo
mode is turned on, the word ON will appear in the
center display. To turn on or turn off the demo mode,
press the Enter button or the Speed decrease button.
Press the decrease button to transfer data. To send
and receive workouts, workout logs, and updates,
press the Enter button. When the process is finished,
the words TRANSFERS DONE will appear in the display.
To exit the information mode, remove the key from the
console.
Press the decrease button next to the Enter button to
view the next screen. The display will show the contrast level of the displays. Press the Incline increase
and decrease buttons to adjust the contrast. Then,
press the Enter button.
22
HOW TO USE THE STEREO SOUND SYSTEM
To use the SYNC, plug a compatible iPod (not
included) into the cable extending from the SYNC.
Make sure that the iPod is fully plugged in.
This treadmill has been designed specifically to work
with iPod and has been certified by the developer to
meet Apple performance standards. To play music or
audio books through the console’s stereo speakers,
you must connect your iPod, MP3 player, CD player, or
other personal audio player to the console through the
audio jack or through the optional PROFORM SYNC.
The SYNC will charge your iPod while you use it.
Next, press the play button
on your iPod, MP3 player,
CD player, or other personal
audio player. Adjust the volume on your personal audio
player or press the volume
increase and decrease buttons on the console.
Plug one end of your audio wire into the audio jack
on the console. Plug the other end into a jack on your
MP3 player, CD player, or other personal audio player.
Make sure that the audio wire is fully plugged in.
Volume Decrease
Volume Increase
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat surface and not on the console.
23
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL
HOW TO MOVE THE TREADMILL
To avoid damaging the treadmill, adjust the incline
to the lowest position before you fold the treadmill.
Then, remove the key and unplug the power cord.
CAUTION: You must be able to safely lift 45 lbs. (20
kg) to raise, lower, or move the treadmill.
efore moving the treadmill, fold it as described at the
B
left. CAUTION: Make sure that the latch knob is
locked in the storage position. Moving the treadmill
may require two people.
1. Hold the frame and one of the handrails, and place
one foot against a wheel.
1. Hold the metal frame firmly in the location shown
by the arrow below. CAUTION: Do not hold the
frame by the plastic foot rails. Bend your legs
and keep your back straight.
1
1
Frame
Handrail
Frame
Wheel
2. Pull back on the handrail until the treadmill will roll
on the wheels, and carefully move it to the desired
location. CAUTION: Do not move the treadmill
without tipping it back, do not pull on the frame,
and do not move the treadmill over an uneven
surface.
2.Raise the frame until the latch knob locks in the
storage position. CAUTION: Make sure that the
latch knob locks.
2
Frame
3. Place one foot against a wheel, and carefully lower
the treadmill.
HOW TO LOWER THE TREADMILL FOR USE
1.
See drawing 2. Hold the upper end of the treadmill frame with your right hand. Pull the latch knob
to the left; if necessary, push the frame forward
slightly. Pivot the frame downward a few inches,
and release the latch knob.
Latch
Knob
2. S
ee drawing 1 at the left. Hold the metal frame
firmly with both hands, and lower it to the floor.
CAUTION: Do not hold the frame by the plastic
foot rails, and do not drop the frame. Bend your
legs and keep your back straight.
To protect the floor or carpet, place a mat under the
treadmill. Keep the treadmill out of direct sunlight.
Do not leave the treadmill in the storage position in
temperatures above 85° F (30° C).
24
TROUBLESHOOTING
Most treadmill problems can be solved by following the simple steps below. Find the symptom that
applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual.
PROBLEM: The power does not turn on
SOLUTION:a.Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor
is plugged into a properly grounded outlet (see page 14). Use only a single-outlet surge suppressor that meets all of the specifications described on page 14. IMPORTANT: The treadmill is not
compatible with GFCI-equipped outlets.
b.
After the power cord has been plugged in, make sure that the key is inserted into the console.
c.Check the power switch located on the treadmill
frame near the power cord. If the switch protrudes
as shown, the switch has tripped. To reset the
switch, wait for five minutes and then press the
switch back in.
c
Tripped
Reset
PROBLEM: The power turns off during use
SOLUTION:a.Check the power switch (see the drawing above). If the switch has tripped, wait for five minutes
and then press the switch back in.
b.Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for five
minutes, and then plug it back in.
c. Remove the key from the console. Reinsert the key into the console.
d. If the treadmill still will not run, please see the front cover of this manual.
PROBLEM: The console displays remain lit when you remove the key from the console
SOLUTION: a.The console features a display demo mode, designed to be used if the treadmill is displayed in a
store. If the displays remain lit when you remove the key, the demo mode is turned on. To turn off
the demo mode, hold down the Stop button for a few seconds. If the displays are still lit, see THE
INFORMATION MODE on page 22 to turn off the demo mode.
PROBLEM: The displays of the console do not function properly
SOLUTION:a.Remove the key from the console and UNPLUG
THE POWER CORD. With the help of a second
person, carefully tip down the Uprights (84, 85).
There may be three #8 x 2" Screws (16) in the bottom of the Belly Pan (75). If there are, remove them.
Note: A Phillips screwdriver with a shaft at least 5
in. (13 cm) long is required.
a
84
75
85
Then, raise the Uprights (84, 85).
16
16
25
Remove the three #8 x 3/4" Screws (1) and carefully pivot the Motor Hood (62) off.
1
62
Locate the Reed Switch (73) and the Magnet (47)
on the left side of the Pulley (48). Turn the Pulley
until the Magnet is aligned with the Reed Switch.
Make sure that the gap between the Magnet
and the Reed Switch is about 1/8 in. (3 mm).
If necessary, loosen the #8 x 3/4" Truss Head
Screw (18), move the Reed Switch slightly, and
then retighten the Screw. Reattach the Motor Hood
(not shown) with the #8 x 3/4" Screws (not shown).
Reattach the #8 x 2" Screws (not shown) if necessary. Run the treadmill for a few minutes to check
for a correct speed reading.
1/8 in.
18
73
47
48
Top
View
PROBLEM:The incline of the treadmill does not change correctly
SOLUTION:a. With the key in the console, press one of the Incline buttons. While the incline is changing,
remove the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the
maximum incline level and then return to the minimum level. This will recalibrate the incline system.
PROBLEM: The walking belt slows when walked on
SOLUTION: a.Use only a surge suppressor that meets all of the specifications described on page 14.
b.If the walking belt is overtightened, treadmill performance may decrease and the walking belt may
become damaged. Remove the key and UNPLUG
THE POWER CORD. Using the hex key, turn both
idler roller bolts counterclockwise, 1/4 of a turn.
When the walking belt is properly tightened, you
should be able to lift each edge of the walking belt
2 to 3 in. (5 to 7 cm) off the walking platform. Be
careful to keep the walking belt centered. Then,
plug in the power cord, insert the key, and run the
treadmill for a few minutes. Repeat until the walking belt is properly tightened.
b
2–3 in.
Idler Roller Bolts
c.If the walking belt still slows when walked on, see the front cover of this manual.
26
PROBLEM: The walking belt is off-center or slips when walked on
SOLUTION:a.If the walking belt is off-center, first remove the
key and UNPLUG THE POWER CORD. If the
walking belt has shifted to the left, use the hex
key to turn the left idler roller bolt clockwise 1/2
of a turn; if the walking belt has shifted to the
right, turn the left idler roller bolt counterclockwise
1/2 of a turn. Be careful not to overtighten the
walking belt. Then, plug in the power cord, insert
the key, and run the treadmill for a few minutes.
Repeat until the walking belt is centered.
b.
If the walking belt slips when walked on, first
remove the key and UNPLUG THE POWER
CORD. Using the hex key, turn both idler roller
bolts clockwise, 1/4 of a turn. When the walking
belt is correctly tightened, you should be able to
lift each edge of the walking belt 2 to 3 in. (5 to 7
cm) off the walking platform. Be careful to keep
the walking belt centered. Then, plug in the power
cord, insert the key, and carefully walk on the
treadmill for a few minutes. Repeat until the walking belt is properly tightened.
27
a
b
EXERCISE GUIDELINES
Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of
time. During the first few minutes of exercise, your
body uses carbohydrate calories for energy. Only after
the first few minutes of exercise does your body begin
to use stored fat calories for energy. If your goal is to
burn fat, adjust the intensity of your exercise until your
heart rate is near the lowest number in your training
zone. For maximum fat burning, exercise with your
heart rate near the middle number in your training
zone.
WARNING:
Before beginning this
or any exercise program, consult your physician. This is especially important for persons
over age 35 or persons with pre-existing
health problems.
The heart rate monitor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The heart rate monitor is
intended only as an exercise aid in determining heart rate trends in general.
Aerobic Exercise—If your goal is to strengthen your
cardiovascular system, you must perform aerobic
exercise, which is activity that requires large amounts
of oxygen for prolonged periods of time. For aerobic
exercise, adjust the intensity of your exercise until your
heart rate is near the highest number in your training
zone.
These guidelines will help you to plan your exercise
program. For detailed exercise information, obtain a
reputable book or consult your physician. Remember,
proper nutrition and adequate rest are essential for
successful results.
WORKOUT GUIDELINES
EXERCISE INTENSITY
Warming Up—Start with 5 to 10 minutes of stretching and light exercise. A warm-up increases your body
temperature, heart rate, and circulation in preparation
for exercise.
Whether your goal is to burn fat or to strengthen your
cardiovascular system, exercising at the proper intensity is the key to achieving results. You can use your
heart rate as a guide to find the proper intensity level.
The chart below shows recommended heart rates for
fat burning and aerobic exercise.
Training Zone Exercise—Exercise for 20 to 30 minutes with your heart rate in your training zone. (During
the first few weeks of your exercise program, do not
keep your heart rate in your training zone for longer
than 20 minutes.) Breathe regularly and deeply as you
exercise—never hold your breath.
Cooling Down—Finish with 5 to 10 minutes of stretching. Stretching increases the flexibility of your muscles
and helps to prevent post-exercise problems.
EXERCISE FREQUENCY
To find the proper intensity level, find your age at the
bottom of the chart (ages are rounded off to the nearest ten years). The three numbers listed above your
age define your “training zone.” The lowest number is
the heart rate for fat burning, the middle number is the
heart rate for maximum fat burning, and the highest
number is the heart rate for aerobic exercise.
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest
between workouts. After a few months of regular exercise, you may complete up to five workouts each week,
if desired. Remember, the key to success is to make
exercise a regular and enjoyable part of your everyday
life.
28
SUGGESTED STRETCHES
The correct form for several basic stretches is shown at the right. Move slowly as you stretch­—never bounce.
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward from
your hips. Allow your back and shoulders to relax as you reach down
toward your toes as far as possible. Hold for 15 counts, then relax.
Repeat 3 times. Stretches: Hamstrings, back of knees and back.
1
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot toward
you and rest it against the inner thigh of your extended leg. Reach
toward your toes as far as possible. Hold for 15 counts, then relax.
Repeat 3 times for each leg. Stretches: Hamstrings, lower back and
groin.
2
3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place your
hands against a wall. Keep your back leg straight and your back foot
flat on the floor. Bend your front leg, lean forward and move your
hips toward the wall. Hold for 15 counts, then relax. Repeat 3 times
for each leg. To cause further stretching of the achilles tendons,
bend your back leg as well. Stretches: Calves, achilles tendons and
ankles.
3
4
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and grasp one
foot with your other hand. Bring your heel as close to your buttocks
as possible. Hold for 15 counts, then relax. Repeat 3 times for each
leg. Stretches: Quadriceps and hip muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward.
Pull your feet toward your groin area as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Quadriceps and hip
muscles.
29
5
PART LIST
Model No. PFTL59510.0 R0212B
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
#8 x 3/4" Screw
#10 x 3/4" Screw
Inner Cushion
5/16" x 1" Bolt
#8 x 1" Tek Screw
Latch Bracket
3/8" x 4" Bolt
3/8" x 2" Bolt
1/4" x 1/2" Bolt
3/8" Nut
3/8" Star Washer
1/4" Star Washer
5/16" Star Washer
3/8" x 1 1/2" Bolt
#8 x 3/4" Tek Screw
#8 x 2" Screw
#8 x 1/2" Pan Head Screw
#8 x 3/4" Truss Head Screw
#8 x 1 1/2" Screw
5/16" x 1 1/2" Bolt
5/16" x 3 5/8" Bolt
3/8" x 1" Bolt
1/4" x 1" Bolt
Idler Roller Bolt
3/8" x 1 3/4" Bolt
3/8" x 1 1/2" Hex Head Bolt
3/8" x 3/4" Bolt
#8 x 1/2" Bright Screw
#8 x 1/2" Ground Screw
#12 x 1 1/4" Screw
1/4" Motor Bolt
#8 Belt Guide Screw
1/4" Washer
1/4" Split Washer
3/8" Jam Nut
5/16" Flange Nut
Hood Clip
5/16" Cage Nut
iFit Housing
Left Foot Rail
Latch Warning Decal
Platform Cushion
Belt Guide
Walking Platform
Frame Cap
Frame Spacer
Magnet
Front Roller/Pulley
Walking Belt
Not Used
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
Storage Latch
Console Ground Wire
#8 x 1" Screw
Right Foot Rail
Frame
Roller Bracket
Roller Ground Wire
Right Rear Foot
Left Rear Foot
Idler Roller
Hex Key
Motor Hood
Hood Accent
Lift Frame
Lift Frame Ground Wire
Drive Motor Belt
Drive Motor
Controller Ground Wire
Power Cord
Grommet
Power Switch
Controller
Reed Switch
Reed Switch Clamp
Belly Pan
Wire Tie
8" Tie
15" Tie
Releasable Tie
Cushion Plate
Handrail Cap
Left Handrail
Right Handrail
Left Upright
Right Upright
5/32" Hex Key
Upright Wire
Left Base Cover
Base Cap
Base Foot
Right Base Cover
Caution Decal
Incline Wire
Base Foot Spacer
Base
Wheel
Incline Motor
Incline Motor Spacer
Key/Clip
Cable Tie
21
4
4
6
4
1
4
6
4
6
6
8
4
2
9
3
8
5
2
2
2
2
1
2
1
1
2
7
1
8
2
4
2
2
4
4
3
2
1
1
1
4
2
1
2
2
1
1
1
0
30
1
2
4
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
8
2
4
4
2
1
1
1
1
1
1
1
2
4
1
2
1
2
1
2
1
1
1
3
Key No. Qty.
Description
Key No. Qty.
Description
101
102
103
104
105
Console
Console Frame
Left Tray
#8 x 3/4" Truss Head Screw
Console Clamp
106
107
108
*
Console Base
Crossbar
Right Tray
User’s Manual
1
1
1
2
2
1
1
1
–
Note: Specifications are subject to change without notice. For information about ordering replacement parts, see
the back cover of this manual. *These parts are not illustrated.
31
32
24
34
33
19
56
30
80
42
28
3
15
86
18
59
36
60
21
61
41
24
15
3
30
80
42
34
33
40
19
28
30
36
18
58
21
32
43
57
56
30
36
55
30
44
20
10
45
54
80
42
3
15
49
46
8
30
48
47
80
3
42
15
51
32
30
20
43
36
10
30
23
8
10
45
46
6
8
EXPLODED DRAWING A
Model No. PFTL59510.0 R0212B
EXPLODED DRAWING B
Model No. PFTL59510.0 R0212B
1
62
37
1
37
1
63
37
104
104
31
64
22
66
28
28
67
22
68
17
73
15
76
15
74
15
16
75
77
79
69
72
18
78
28
65
15
16
16
33
28
70
71
EXPLODED DRAWING C
Model No. PFTL59510.0 R0212B
12
9
82
2
12
38
81
107
4
1
1
1
13
2
12
1
4
12
84
14
1
9
83
38
81
11
1
4
7
87
13
4
89
11
35
85
27
88
92
27
90
95
5
8
87
25
94
96
10
90
5
97
26
89
11
92
14
11
93
35
35
35
90
10
5
7
98
96
94
8
34
90
5
91
EXPLODED DRAWING D
Model No. PFTL59510.0 R0212B
17
17
99
39
100
101
17
102
29
52
103
1
105
53
1
1
53
105
1
1
1
106
108
1
1
1
1
1
35
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us:
•
the model number and serial number of the product (see the front cover of this manual)
•
the name of the product (see the front cover of this manual)
•the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED
DRAWING near the end of this manual)
LIMITED WARRANTY
IMPORTANT: You must register this product within 30 days of the purchase date to avoid added
fees for service needed under warranty. Go to www.proformservice.com/registration.
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and
material, under normal use and service conditions. The frame is warranted for a lifetime. The drive motor
is warranted for twenty-five (25) years from the date of purchase. Parts and labor are warranted for one
(1) year from the date of purchase.
This warranty extends only to the original purchaser. ICON’s obligation under this warranty is limited to
repairing or replacing, at ICON’s option, the product through one of its authorized service centers. All
repairs for which warranty claims are made must be preauthorized by ICON. If the product is shipped to
a service center, freight charges to and from the service center will be the customer’s responsibility. For
replacement parts shipped while the product is under warranty, the customer will be responsible for a minimal handling charge. For in-home service, the customer will be responsible for a minimal trip charge. This
warranty does not extend to any damage to a product caused by or attributable to freight damage, abuse,
misuse, improper or abnormal usage, or repairs not provided by an ICON authorized service center; to
products used for commercial or rental purposes or as store display models; or to products transported
or purchased outside the US. No other warranty beyond that specifically set forth above is authorized by
ICON.
ICON is not responsible or liable for indirect, special, or consequential damages arising out of or in connection with the use or performance of the product; damages with respect to any economic loss, loss of
property, loss of revenues or profits, loss of enjoyment or use, or costs of removal or installation; or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties, and any implied warranties of
merchantability or fitness for a particular purpose are limited in their scope and duration to the terms set
forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the
above limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights that vary from state to state.
ICON Health & Fitness, Inc., 1500 S. 1000 W., Logan, UT 84321-9813
Part No. 301946 R0212B
Printed in USA © 2012 ICON IP, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement