commercial freezer/refrigerator

commercial freezer/refrigerator
COMMERCIAL
FREEZER/REFRIGERATOR
TABLE OF CONTENTS
Product Registration ..............................................................
Important
Safety Instructions
................................................
First Steps ..................................................................................
Appliance Start=up .................................................................
Features ................................................................................
Care and Cleaning .....................................................
Energy=Saving
Tips ........................................................
Power Failure .....................................................................
Before You Call ..............................................................
Wiring Diagram .....................................................................
Warranty ...........................................................................
READ AND SAVE THESE INSTRUCTIONS
2
2
3
6
6
7
8
8
9
11
12
A01063701(August2014)
Product
Important
Registration
Safety Instructions
Read all instructions
this appliance,
before using
For Your Safety
Do not store or use gasoline or other
flammable vapors and liquids in the vicinity of
this unit or any other appliance. Read product
Read and Save These Instructions
These instructions include information
which is intended to assure the operator of
correct installation, operation and service.
Before attempting installation, adjustment or
maintenance, be certain of the following:
Child Safety
•
Destroy carton, plastic bags, and any
exterior wrapping material immediately
after the appliance is unpacked. Children
should never use these items for play.
Cartons covered with rugs, bedspreads,
plastic sheets or stretch wrap may
become airtight chambers and can
quickly cause suffocation.
•
Remove all staples from the carton.
Staples can cause severe cuts, and destroy
finishes if they come in contact with other
appliances or furniture.
• That you have read and fully understand
the instructions.
That you have all the tools required and are
trained to use them.
That you have met all installation and
usage restrictions and are familiar with the
functions and operations of the unit.
That you follow all instructions
as given.
exactly
All the fittings, measurements, recommendations
and procedures are significant. Substitutions
and approximations must be avoided. Improper
handling, maintenance, installation and
adjustment, or service attempted by anyone
other than a qualified technician, may void the
future warranty claims and cause damage to the
unit and/or result in injury to the operator and/
or bystanders.
Record your !odel
Serial Numbers
and
Record the model number and serial number of
this appliance in the space provided below (the
serial plate is located inside the
cabinet compartment).
Model Number:
Serial Number:
• An empty, discarded ice box, refrigerator,
or freezer is a very dangerous attraction
to children.
•
Remove and discard any spacers used to
secure the shelves during shipping. Small
.............................
objects are a choke hazard to ch!!dren .................
Proper Disposal of Appliance
Risk of Child
Entrapment
Child entrapment and suffocation are not
problems of the past. 3unked or abandoned
refrigerators or freezers are still dangerous
- even if they will sit for "just a few days" If
you are getting rid of your old refrigerator or
freezer, please follow the
instructions below to help
prevent accidents:
Remove the door.
Purchase
Register
Date:
Your
Product
The self-addressedPRODUCTREGISTRATION
CARD (shownabove)should be filledin completely,
signedandreturnedto the addressprovided.
Have the
refrigerant
removed by a
qualified technician.
Important
Safety Instructions
Electrical Information
Other Precautions
These guidelines must be followed to ensure
that safety mechanisms in the design of this
• NEVER unplug the appliance by
pulling on the power cord. Always grip
app!iance will operate proper! y............................................... the plug firmly and pull straight out from
the receptacle.
• To avoid electrical shock, unplug the
appliance before cleaning.
Avoid fire hazard or electric shock. Do
not
use
an extension cord or an adapter plug. Do not
remove any prong from the power cord ....
_rounaln_
type
wall receptacle
...............
Turning the control to "OFF" turns off the
compressor but does not disconnect power to
Do not, under
"_
any circumstances,]
grounding
prong. /
Power sup_ply
cord w!.th 3-prong
grounamg p_ug
First Steps
Inspection
Refer to the serial plate for correct electrical
rating. The power cord of the appliance
is equipped with a three-prong grounding
plug for protection against shock hazards.
It must be plugged directly into its own
properly grounded three-prong receptacle,
protected with a 15-amp time delay fuse
or circuit breaker. The receptacle must
be installed in accordance with the local
codes and ordinances. Consult a qualified
electrician. Receptacles with Ground
Fault Circuit Interrupters (GFCI) are
NOT RECOMMENDED. DO NOT USE AN
EXTENSION CORD OR AN ADAPTER PLUG.
for Damage
Inspect the underside of the cabinet and
packaging for damage, similar to what can
be caused with a forklift. If hidden damage
is found after uncrating, immediately call the
delivery carrier and request an inspection. Retain
all packaging and crating materials until the
inspection is complete.
Parts and Accessories
Check to make sure that you have received the
box containing all of the components listed below.
* If the voltage varies by 10% or more,
appliance performance may be affected.
Operating the appliance with insufficient
power can damage the compressor. Such
damage is not covered under the warranty.
If you suspect your voltage is high or low,
consult your power company for testing.
A
Carriage Bolt (4)
B
Lock Nut (4)
C
Swivel Casters (2)
D
Fixed Caster (2)
E
Hex Screw (10)
* To prevent the appliance from being turned
off accidentally, do not plug the unit into an
outlet controlled by a wall switch or pull cord.
* DO NOT pinch, knot, or bend the power cord
in any manner.
C
3
_
E
First Steps
Tools Needed
The following tools are required to assemble and install the casters to the unit:
5/16", 3/8" and 9/16"
Socket or Open End Wrench
Uncrating
Adjustable
Wrench or
Pliers
Phillips
Screwdriver
and Set=up
1. Remove carton and all loose parts from
inside the unit.
2. Remove the rear access guard and place
it and the screws in a safe place for
reassembly later.
3. Using an assistant, carefully tip the unit
onto its back and rest on blocks to avoid
damaging the condensate drain hose
and the plastic raceway that covers the
evaporator tubing on the back of the
cabinet.
4. Remove and discard the two front brackets
Door
support
bracket
with leg leveler using a 5/16" socket
wrench. See Figure 1.
5. FOR GLASS DOOR MODELS ONLY - Remove
bottom door support bracket and screw
opposite the door hinge using a 3/8" socket
wrench. See Figure 2.
Figure 2
Door Swing Reversal
In order to reverse
at 1-866-738-1640.
door, order service
For right hand swing doors,
For left hand swing doors,
kit from Frigidaire
order kit #5304488173.
order kit #5304487215.
4
Commercial
Service Center
First Steps
Front Fixed Caster Installation
Locate and aligr fixed caster (with brake lever
facing front of unit - see Figure 3) over the
same mounting holes from bracket in Figure 1
using 6 hex screws (3 for each caster). Secure
the screws snug using a 3/8" open end wrench.
Repeat this procedure for opposite corner, DO
NOT OVERTIGHTEN.
(2) Carria!
lock nut
Swivel caster
Install caster
using (2)hex
screws
Figure 5
4. Repeat the same procedure for the opposite
rear corner.
- Front
of unit
5. With the help of an assistant, carefully
upright the unit. Reassemble the rear
access guard with screws.
(3)
Fixed -/
caster
Figure 3
Rear Swivel Caster Installation
Unit will roll forward as it is tipped up,
1. Remove and discard the screws shown in
Figure 4 from each bottom corner using a
5/16" socket wrench.
Appliance Placement
Leave a 1" space on all sides and the back of
the cabinet for ease of installation, proper air
circulation and electrical connections. DO NOT
block the front grill on the lower front of your
appliance. Sufficient air circulation is essential
for the proper operation of your appliance.
Choose a place that is near a grounded electrical
outlet. For the most efficient operation, the
appliance should be located where surrounding
temperatures will not drop below 40OF (5oC)
or exceed 110OF (43oc). Additional compressor
heaters are not recommended.
Figure 4
2. Locate and align swivel caster over the
holes and install with 2 hex screws. Secure
Insulation
the screws snug using a 3/8" socket
wrench. DO NOT OVERTIGHTEN.
The insulated space of this cabinet is sealed
to maintain peak efficiency. Holes drilled in
the cabinet may destroy that seal and damage
electrical wiring located in the insulated space.
DAMAGED ELECTRICAL WIRING
OR WET
INSULATION
CAUSED BY DRILLING
WILL
VOID THE WARRANTY,
3. On the opposite side of the swivel caster
plate, insert 2 carriage bolts through the
compressor support rail and swivel caster
plate. Use a lock nut on each bolt and
tighten securely using a 9/16" socket
wrench. See Figure 5.
5
Appliance
Start=up
Features
Once the appliance has been located in its
permanent location and the proper power and
grounding has been provided, the following
items must be checked or completed:
• Heavy-duty epoxy powder-coated
adjustable shelves
Cool Down Period
• 2-1/2" urethane foam cabinet insulation
For safe food storage, allow 24 hours for the
appliance to cool down completely before loading
with food. The appliance will run continuously
for the first several hours. Do not place any food
in the appliance until after the first 24 hours of
operation.
• Torsion-spring
Thermostat
• NSF-certified top-mounted
door closer
• Heavy-duty fixed and swivel casters
• 17-watt fluorescent
lamp
• Stainless steel evaporator
housing
• Removable stainless steel drain cover
Setting
• Adjustable temperature
The appliance is shipped from the factory with
the thermostat set at about the mid-point of the
operating range. Adjustments colder or warmer
can be made after the appliance has been running
for at least 8 hours. Allow at least 8 hours for
temperature
thermostat.
evaporator
• NSF-certified
control
interior
• Heavy-duty front grill
• Heavy-duty commercially
harness
stabilization before re-adjusting the
rated electrical
• Heavy-duty removable stainless steel shelf
support
Defrost Setting
The appliance is designed to defrost
automatically every 12 hours. To set the time of
defrost, wait until the desired time to defrost.
With the notch on the timer knob aligned with
the line on the bracket (Figure 6), turn the
defrost timer knob clockwise slowly. The timer
will click several times, then once loudly, at
which point the defrost cycle begins. The timer
knob will advance through the defrost cycle, then
click loudly at the end of the cycle. The appliance
will defrost automatically every 12 hours after
the first defrost cycle.
This appliance is
goes on the floor
are placed in the
they are needed.
upper position.
provided with 4 shelves. One
of the cabinet and the other 3
metal side supports wherever
The shallow shelf goes in the
Shelf
For example, to set the appliance to defrost
at 10:00 AM, turn the timer knob clockwise
at 10:00 AM until the timer clicks loudly. The
appliance will defrost daily at 10:00 AM and
again 12 hours later at 10:00 PM. NOTE: The
appliance interior temperature will rise slightly
during the first defrost cycle.
Bottom
Shelf
Casters
The appliance comes with 4 casters; 2 with locks
for the front of the unit and 2 without locks for
the back of the unit. The casters allow you to
move the unit to it's final destination with ease.
The casters can then be locked into place.
Refer to the First Steps section for caster
installation instructions.
Adjustable
Temperature
Control
The adjustable cold control is located on the top
left side of the evaporator housing inside the
unit. "5" is the medium (recommended) setting
and "9" is the coldest setting.
Figure 6
6
Features
Care and
NSF Certified Temperature
Gauge
Ciearlirlg
Cleaning the Interior
This appliance is equipped with an NSF-certified
temperature gauge to display cabinet internal
temperature. The temperature gauge is located
on the top right side of the evaporator housing
inside the unit.
Be sure to turn the temperature control to "OFF"
and unplug the electrical cord. Wash the inside
surface of the storage area with a Solution
1 tbsp. (12 g) of baking
of
soda in 1 qt. (1 I)
warm water. Rinse thoroughly
water and wipe dry.
with clean, warm
Cleaning the Exterior
Fluorescent
Lamp
Wipe the cabinet exterior occasionally with a
cloth dampened in mild detergent and water.
Rinse and wipe dry with a soft cloth. Do not use
razor blades or other sharp instruments that can
scratch the appliance surface when removing
adhesive labels. Any glue left from the tape can
be removed with a mixture of warm water and
(glass door models)
mild detergent or touch the residue with the
sticky side of tape already removed. DO NOT
REMOVE THE SERIAL PLATE.
The Glass Door Refrigerator is equipped with
a 17 watt fluorescent lamp. A ballast - lamp
mismatch may result in poor or no lighting.
Condensate
If the lamp fails, replace with a lamp of the
same type and wattage. Also, replace a lamp
that flickers continuously. This could damage the
ballast.
Some models have a condensate pan in a fixed
position located behind the toe grill. This must not
be removed from under the cabinet. If the pan is
removed, condensate will drop onto the floor.
Turning the light off, when not in use, will save
energy. However, frequent ON-OFF cycling will
reduce the lamp life.
Use only NSF certified lamp which can be
ordered from your Frigidaire Commercial Service
Center by calling 1-866-738-1640.
Interior
Light
(stainless
steel door models)
Pan
The stainless steel door models are equipped with
a 40-watt bulb that lights up when the door is
opened. If the bulb goes bad, replace with bulb of
the same type and wattage. This is a special bulb
with a shatterproof coating. Use only an NSFcertified bulb of the same type and wattage which
can be ordered from your Frigidaire Commercial
Service Center by calling 1-866-738-1640.
7
Energy=Saving
Tips
Power
DO NOT open the appliance lid unnecessarily
the appliance is off for several hours.
This appliance is designed for efficiency with
heavy foam insulation. However, there are things
that the user can do to maintain the appliance in
operating condition.
lake sure the appliance is located to prevent
direct exposure to sunlight, air ducts, etc.
* Keep the lid closed except for normal use.
Inspect the door often to see that it selfcloses and the gaskets are in good condition.
* Do not overstock the product in the cabinet
because it will block the normal air flow.
* Have at least annual inspections by a
qualified service company to see that the
refrigerant charge is correct.
* This appliance operates more efficiently
a cooler ambient than in a hot ambient.
if
If a power failure occurs, pack 7 or 8 pounds
of dry ice into the freezer every 24 hours. Look
in the Yellow Pages under "Dry Ice'; "Dairies';
or "Ice Cream Manufacturers" for local dry ice
suppliers. Always wear gloves and use caution
when handling dry ice.
* Do not operate the appliance any colder
than necessary to maintain safe, product
storage temperatures.
,
Failure
in
Try to maintain an ambient below 80OF
(27oC) and 65% RH (Relative Humidity) for
maximum efficiency.
Periods of Non=use and Hoving Tips
Leave the appliance operating during periods of
non-use of less than 3 weeks.
Long Periods of Non=use
If the appliance will not be used for
several months:
* Remove all food and unplug the power cord.
* Clean and dry the interior thoroughly.
* Leave the appliance door open slightly,
blocking it open if necessary, to prevent
odor and mold growth.
Hoving
When moving the appliance, follow these
guidelines to prevent damage:
* Disconnect the power cord plug from the
wall outlet.
* Remove foods, then defrost, and clean
the appliance.
* Secure all loose items such as base panel,
baskets, and shelves by taping them
securely in place to prevent damage.
* ][n the moving vehicle, secure appliance in
an upright position to prevent movement.
Also, protect outside of appliance with a
blanket or similar item.
8
Before
You Caii
TROU BLESHOO_NG
GUIDE
PROBLEM
APPLIANCE
Before calling for service, review this list. It may save you time and
expense. This list includes common occurrences that are not the
result of defective workmanship or materials in this appliance.
CAUSE
CORRECTION
OPERATION
Appliance does not run.
Appliance runs too much
or too long.
• Appliance is plugged into
a circuit that has a ground
fault interrupt.
• Temperature control is in
the "OFF" position.
• Appliance may not be
plugged in, or plug may
be loose.
• Fuse blown or tripped
circuit breaker.
• Power outage.
• Room or outside weather
is hot.
• Appliance has recently
been disconnected for a
period of time.
• Large amount of warm
or hot food have been
stored recently.
• Door is opened too
frequently or kept open
too long.
• Appliance door may be
slightly ajar.
• Temperature control is set
too low.
Appliance gaskets are
dirty, worn, cracked or
poorly fitted.
o
o
Use another circuit. If you are
unsure about the outlet, have it
checked by a certified technician.
See Thermostat Setting.
Ensure plug is tightly pushed
into outlet.
• Check/replace fuse with a 15-amp
time delay fuse. Rest circuit breaker.
• Check house lights. Call local
electric company.
• It's normal for the appliance to work
harder under these conditions.
• It takes 24 hours for the appliance
to cool down completely.
o
o
Warm food will cause appliance
to run more until the desired
temperature is reached.
Warm air entering the appliance
causes it to run more. Open the
door less often.
See "Door Problems':
Turn control knob to a warmer
setting. Allow several hours for the
temperature to stabilize.
Clean or change gasket. Leaks in
the lid seal will cause appliance
to run longer in order to maintain
desired temperature.
Interior appliance
temperature is too cold.
• Temperature
too low.
control is set
• Turn control knob to a warmer
setting. Allow several hours for the
temperature to stabilize.
Interior appliance
temperature is too warm.
• Temperature
too warm.
control is set
• Turn control knob to a colder
setting. Allow several hours for the
temperature to stabilize.
• Warm air entering the appliance
causes it to run more. Open the
door less often.
• Wait until the appliance has had
a chance to reach its selected
temperature.
• Appliance requires 24 hours to cool
down completely.
Door is open too frequently
or kept open too long.
• Large amount of warm or
hot food have been stored
recently.
• Appliance has recently
been disconnected for a
period of time.
Appliance external surface
temperature is warm.
The external appliance
walls can be as much
as 30°F warmer than
room temperature.
9
This is normal while the
compressor works to transfer heat
from inside the appliance cabinet.
Before
You Cali
PROBLEM
CAUSE
CORRECTION
Louder sound levels
whenever appliance is on.
• Modern appliances
have increased storage
capacity and more stable
temperatures. They require
heaw-duty compressors.
• This is normal. When the
surrounding noise level is low, you
may hear the compressor running
while it cools the interior.
Louder sound levels when
compressor comes on.
• Appliance operates at
higher pressures during
the start of the ON cycle,
• This is normal. Sound will level
off or disappear as appliance
continues to run.
Popping or cracking sound
when compressor comes on.
• Metal parts undergo
expansion and contraction,
as in hot water pipes,
• This is normal. Sound will level
off or disappear as appliance
continues to run.
Bubbling or gurgling sound.
• Refrigerant (used to cool
appliance) is circulating
throughout the system.
• This is normal.
Vibrating or rattling noise.
• Appliance is not level. It
rocks on the floor when it
SOUND AND NOISE
is moved slightly.
Floor is uneven or weak.
Appliance is touching
the wall.
WATER/MOISTURE/FROST
Moisture forms on inside
appliance walls,
INSIDE
Level the appliance by putting
wood or metal shims under part of
the appliance.
Ensure floor can adequately
support appliance. Level
the appliance.
Re-level appliance or move
appliance slightly.
APPLIANCE
• Weather is hot and humid,
which increases internal
rate of frost build-up.
• This is normal.
• Interior needs to be
cleaned,
• Food with strong odors are
in the appliance.
• Clean interior with sponge, warm
water, and baking soda.
• Cover the food tightly.
• Appliance is not level. It
rocks on the floor when it
is moved slightly,
• Floor is uneven or weak.
• Level the appliance by putting
wood or metal shims under part of
the appliance.
• Ensure floor can adequately
support appliance. Level the
appliance by putting wood or metal
shims under part of the appliance.
• The fluorescent lamp is
burned out.
• See "Fluorescent Lamp" in
Features section.
• No electric current is
reaching the appliance.
• See "Appliance does not run"
ODOR IN APPLIANCE
Odors in appliance.
DOOR PROBLEMS
Door will not close.
LIGHTING
PROBLEMS
Fluorescent lamp is not
on.
FOR QUESTIONS!
COMMENTS
TOLL FREE AT 1=866=738=1460,
OR SERVICE
10
PLEASE CALL US
IMPORTANT
SAFETY NOTICE
The information
provided herein is designed to assist qualified repair
personnel only. Untrained persons should not attempt to make repairs
due to the possibility of electrical shock. Disconnect the power cord
before servicing.
ELECTRICAL CiRCUiT
_L_
STAINLESS
STEEL DOOR
REFRIGERATOR
STAINLESS
STEEL
DOOR FREEZERS
GLASS DOOR
REFRIGERATOR
,
Ovedo_d
/
IMPORTANT
IF ANY GREEN GROUNDING WIRES ARE REMOVED DURING
SERVICING, THEY MUST BE RETURNED TO THEIR ORIGINAL
AND PROPERLY SECURED.
11
POSITION
Your appliance is covered by a three (3) year limited warranty. For three (3) years from your original date of purchase, Electrolux will
pay all costs, except as set forth below, for repairing or replacing any parts of this appliance that prove to be defective in materials or
workmanship
when such appliance is installed, used, and maintained in accordance with the provided instructions. For appliances that
are manufactured with a compressor, an additional two (2) year part warranty is provided for the compressor only.
Exclusions
This warranty
does not cover the following:
1.
Products
2.
Normal wear and tear and gradual deterioration.
where the original serial number
has been removed, altered or cannot be readily determined.
3.
Product that has been transferred
4.
Rust on the interior or exterior of the unit.
6.
Products
6.
Food loss due to any refrigerator
7.
Damage
8.
Service calls which do not involve malfunction or defects in materials or workmanship,
with the provided instructions.
9.
Service calls to correct the installation
from its original owner to another
party or moved outside the USA or Canada.
purchased"as-is'.
or freezer failures.
caused at any time during shipment.
of your appliance
or for appliances
used other than in accordance
or to instruct you how to use your appliance.
10.
Expenses for making the appliance accessible for servicing,
part of the appliance when it is shipped from the factory.
11.
Service calls to replace appliance light bulbs, air filters, water filters, and other consumables,
12.
Surcharges including, but not limited to, any after hours, weekend, or holiday service
expense for service calls to remote areas, including the state of Alaska.
13.
Damages to the finish of the appliance
to floors, cabinets, walls, etc.
14.
Damages caused by: services pedormed by unauthorized service companies; use of parts other than genuine Electrolux parts
or parts obtained from persons other than authorized service companies; or external causes such as abuse, misuse, inadequate
power supply, accidents, fires, or acts of God.
16.
For appliances operated by a concessionaire
or vendor in a trailer or other motorized vehicle, or at varying locations, your appliance is covered by a one (1) year, limited parts and labor warrant_ For appliances that are manufactured with a compressor, an
additional four (4) year part warranty is provided for the compressor only.
DISCLAIMER
OF IMPMEDWARRANTIES;
and/or the appliance
LIMITATION
such as removal of trim, cupboards,
shelves, etc., which are not a
or knobs, handles, and other cosmetic parts.
calls, tolls, ferry trip charges, or mileage
location that are incurred during installation,
including
but not limited
OF REMEDIES
CUSTOMER'S
SOLE AND EXCLUSIVE
REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR OR
REPLACEMENT
AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES,
INCLUDING WARRANTIES
OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE (1) YEAR OR THE SHORTEST PERIOD
ALLOWED
BY LAW, BUT NOT LESS THAN ONE (1) YEAR. ELECTROLUX
SHALL NOT BE LIABLE FOR CONSEQUENTIAL
OR
INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF
THIS WRITTEN LIMITED WARRANTY OR ANY IMPLIED WARRANTY
SOME STATES AND PROVINCES
DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, OR LIMITATIONS ON THE DURATION OF
IMPLIED WARRANTIES,
SO THESE LIMITATIONS OR EXCLUSIONS
MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
IfYou Need Service
Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period
should service be required, If service is pedormed, it is in your best interest to obtain and keep all receipts, Service under this warranty must be obtained by contacting Electrelux at the addresses or phone numbers below.
This warranty only applies in the USA and Canada.
America, a division of Electrolux
Home Products,
Electrolux authorizes no person to change or add to
this warranty must be performed by Electrolux or an
illustrated are subject to change without notice.
In the USA, your appliance is warranted by Electrolux
Major Appliances
North
Inc. In Canada, your appliance is warranted by Electrolux
Canada Corp.
any obligations under this warranty. Obligations for service and parts under
authorized service company. Product features er specifications as described or
A00916201/A
USA
1.866.738.1640
Electrolux Major Appliances
North America
(January
2014)
Canada
1.800.265.8352
,-,,m
Electrolux
10200 David Taylor Drive
Charlotte, NC 28262
Electrolux Canada Corp.
5855 Terry Fox Way
Mississauga,
12
Ontario,
Canada
L6V 3E4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement