Sony BDP-S1200 User manual
Advertisement
Advertisement
4-476-200-41(1)
Blu-ray Disc™ /
DVD Player
Operating Instructions
Thank you for your purchase. Before using this player, please read these instruction carefully.
Getting Started
Playback
Internet
Settings and Adjustments
Additional Information
BDP-S1200/BDP-S4200
2
WARNING
To reduce the risk of fire or electric shock, do not expose this appliance to dripping or splashing, and do not place objects filled with liquids, such as vases, on the appliance.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
The AC power cord (mains lead) must be changed only at a qualified service shop.
Do not expose batteries or appliances with battery-installed to excessive heat, such as sunshine and fire.
CAUTION
The use of optical instruments with this product will increase eye hazard. As the laser beam used in this Blu-ray Disc/DVD player is harmful to eyes, do not attempt to disassemble the cabinet.
Refer servicing to qualified personnel only.
This label is located on the laser protective housing inside the enclosure.
Disposal of Old Electrical
& Electronic Equipment
This symbol is applicable in the
European Union and other
European countries with separate collection systems.
Disposal of waste batteries
This symbol is applicable in the
European Union and other
European countries with separate collection systems.
Precautions
• This unit operates on 110 V - 240 V AC,
50/60 Hz. Check that the unit’s operating voltage is identical with your local power supply.
• Install this unit so that the AC power cord
(mains lead) can be unplugged from the wall socket immediately in the event of trouble.
Precautions
This equipment has been tested and found to comply with the limits set out in the EMC
Directive using a connection cable shorter than 3 metres.
On placement
• Place the player in a location with adequate ventilation to prevent heat build-up in the player.
• To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc.
• Do not expose the appliance to naked flame sources (for example, lighted candles).
• Do not install this player in a confined space, such as a bookshelf or similar unit.
• Do not place the player outdoors, in vehicles, on ships, or on other vessels.
• If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the player. Should this occur, the player may not operate properly. In this case, remove the disc and leave the player turned on for about half an hour until the moisture evaporates.
• Do not install the player in an inclined position. It is designed to be operated in a horizontal position only.
• Do not place heavy or unstable objects on the player.
• Do not place any objects other than discs on the disc tray. Doing so may cause damage to the player or the object.
• Take out any discs from the tray when you move the player. If you don’t, the disc may be damaged.
• Disconnect the AC power cord (mains lead) and all other cables from the player when you move the player.
On power sources
• The player is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the player itself has been turned off.
• Disconnect the player from the wall outlet if you are not going to use the player for a long time. To disconnect the AC power cord
(mains lead), grasp the plug itself; never pull the cord.
• Observe following points to prevent the AC power cord (mains lead) being damaged. Do not use the AC power cord (mains lead) if it is damaged, as doing so may result in an electric shock or fire.
– Do not pinch the AC power cord (mains lead) between the player and wall, shelf, etc.
– Do not put anything heavy on the AC power cord (mains lead) or pull on the AC power cord (mains lead) itself.
On AC adaptor
• Use the supplied AC adaptor for this player, as other adaptors may cause a malfunction.
• Do not disassemble or reverse-engineer.
• Do not confine the AC adaptor in a closed place such as a bookshelf or an AV cabinet.
• Do not connect the AC adaptor to a traveler’s electric transformer, which may generate heat and cause a malfunction.
• Do not drop or apply shock.
On adjusting volume
Do not turn up the volume while listening to a section with very low level inputs or no audio signals. Your ears and the speakers may be damaged when the sound level reaches the peak.
On cleaning
Clean the cabinet, panel, and controls with a soft cloth. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine.
On cleaning discs, disc/lens cleaners
Do not use cleaning discs or disc/lens cleaners
(including wet or spray types). These may cause the apparatus to malfunction.
On replacement of parts
In the events that this player is repaired, repaired parts may be collected for reuse or recycling purposes.
On connecting to the HDMI OUT jack
Observe the following as improper handling may damage the HDMI OUT jack and the connector.
• Carefully align the HDMI OUT jack on the rear of the player and the HDMI connector by checking their shapes. Make sure the connector is not upside down or tilted.
• Be sure to disconnect the HDMI cable when moving the player.
• Hold the HDMI connector straight when connecting or disconnecting the HDMI cable. Do not twist or force the HDMI connector into the HDMI OUT jack.
3
4
On watching 3D video images
(BDP-S4200 only)
Some people may experience discomfort
(such as eye strain, fatigue, or nausea) while watching 3D video images. Sony recommends that all viewers take regular breaks while watching 3D video images. The length and frequency of necessary breaks will vary from person to person. You must decide what works best. If you experience any discomfort, you should stop watching the 3D video images until the discomfort ends; consult a doctor if you believe necessary. You should also review (i) the instruction manual and/or the caution message of any other device used with, or Blu-ray Disc contents played with this product and (ii) our website
(http://www.sony-asia.com/support/) for the latest information. The vision of young children (especially those under six years old) is still under development. Consult your doctor (such as a pediatrician or eye doctor) before allowing young children to watch 3D video images.
Adults should supervise young children to ensure they follow the recommendations listed above.
IMPORTANT NOTICE
Caution: This player is capable of holding a still video image or on-screen display image on your television screen indefinitely. If you leave the still video image or on-screen display image displayed on your TV for an extended period of time you risk permanent damage to your television screen. Plasma display panel televisions and projection televisions are susceptible to this.
If you have any questions or problems concerning your player, please consult your nearest Sony dealer.
Copy Protection
Please be advised of the advanced content protection systems used in both Blu-ray
Disc™ and DVD media. These systems, called AACS (Advanced Access Content
System) and CSS (Content Scramble System), may contain some restrictions on playback, analogue output, and other similar features.
The operation of this product and the restrictions placed may vary depending on the date of purchase, as the governing board of the
AACS may adopt or change its restriction rules after the time of purchase.
Cinavia Notice
This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted.
More information about Cinavia technology is provided at the Cinavia Online Consumer
Information Center at http://www.cinavia.com.
To request additional information about
Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer
Information Center, P.O. Box 86851, San
Diego, CA, 92138, USA.
About this manual
The cover page photo is BDP-S4200.
Copyrights and Trademarks
• “AVCHD” and the “AVCHD 3D/
Progressive” logo are trademarks of
Panasonic Corporation and Sony
Corporation.
• Java is a trademark of Oracle and/or its affiliates.
• , “XMB,” and “xross media bar” are trademarks of Sony Corporation and Sony
Computer Entertainment Inc.
• Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic, and the
double-D symbol are trademarks of Dolby
Laboratories.
• For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS
Licensing Limited. DTS, the Symbol, &
DTS and the Symbol together are registered trademarks, and DTS 2.0+Digital Out is a trademark of DTS, Inc. © DTS, Inc. All
Rights Reserved.
• The terms HDMI
®
and HDMI High-
Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
• Blu-ray Disc™, Blu-ray™, Blu-ray 3D™,
BD-Live™, BONUSVIEW™, and the logos are trademarks of the Blu-ray Disc
Association.
• “DVD Logo” is a trademark of
DVD Format/Logo Licensing Corporation.
• “DVD+RW,” “DVD-RW,” “DVD+R,”
“DVD-R,” “DVD VIDEO,” and “CD” logos are trademarks.
• “BRAVIA” is a trademark of Sony
Corporation.
• MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson.
• This product incorporates proprietary technology under license from Verance
Corporation and is protected by U.S. Patent
7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation.
Copyright 2004-2010 Verance Corporation.
All rights reserved by Verance. Reverse engineering or disassembly is prohibited.
• Windows Media is either a registered trademark or trademark of Microsoft
Corporation in the United States and/or other countries.
This product contains technology subject to certain intellectual property rights of
Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft.
Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content and/or WMDRM-protected content.
If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device’s ability to consume PlayReadyprotected content. Revocation should not affect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.
• Music and video recognition technology and related data are provided by Gracenote
®
.
Gracenote is the industry standard in music recognition technology and related content delivery. For more information, please visit www.gracenote.com.
CD, DVD, Blu-ray Disc, and music and video-related data from Gracenote, Inc., copyright © 2000-present Gracenote.
Gracenote Software, copyright © 2000present Gracenote. One or more patents owned by Gracenote apply to this product and service. See the Gracenote website for a nonexhaustive list of applicable Gracenote patents. Gracenote, CDDB, MusicID,
MediaVOCS, the Gracenote logo and logotype, and the “Powered by Gracenote” logo are either registered trademarks or trademarks of Gracenote in the United
States and/or other countries.
• DLNA
®
, the DLNA Logo and DLNA
CERTIFIED™ are trademarks, service
5
6
marks, or certification marks of the Digital
Living Network Alliance.
• Opera
®
Devices SDK from Opera Software
ASA. Copyright 1995-2013 Opera Software
ASA. All rights reserved.
• All other trademarks are trademarks of their respective owners.
• Other system and product names are generally trademarks or registered trademarks of the manufacturers. ™ and ® marks are not indicated in this document.
,continued to page 8
Contents
Getting Started
13 Step 1: Connecting the Player
15 Step 2: Preparing for Network Connection
Playback
Internet (BDP-S4200 only)
Settings and Adjustments
25 Using the Settings Displays
28 [Parental Control Settings]
Additional Information
7
8
Gracenote
®
End User License
Agreement
This application or device contains software from Gracenote, Inc. of Emeryville, California
(“Gracenote”). The software from Gracenote
(the “Gracenote Software”) enables this application to perform disc and/or file identification and obtain music-related information, including name, artist, track, and title information (“Gracenote Data”) from online servers or embedded databases
(collectively, “Gracenote Servers”) and to perform other functions. You may use
Gracenote Data only by means of the intended
End-User functions of this application or device.
You agree that you will use Gracenote Data, the Gracenote Software, and Gracenote
Servers for your own personal noncommercial use only. You agree not to assign, copy, transfer or transmit the Gracenote
Software or any Gracenote Data to any third party. YOU AGREE NOT TO USE OR
EXPLOIT GRACENOTE DATA, THE
GRACENOTE SOFTWARE, OR
GRACENOTE SERVERS, EXCEPT AS
EXPRESSLY PERMITTED HEREIN.
You agree that your non-exclusive license to use the Gracenote Data, the Gracenote
Software, and Gracenote Servers will terminate if you violate these restrictions. If your license terminates, you agree to cease any and all use of the Gracenote Data, the
Gracenote Software, and Gracenote Servers.
Gracenote reserves all rights in Gracenote
Data, the Gracenote Software, and the
Gracenote Servers, including all ownership rights. Under no circumstances will Gracenote become liable for any payment to you for any information that you provide. You agree that
Gracenote, Inc. may enforce its rights under this Agreement against you directly in its own name.
The Gracenote service uses a unique identifier to track queries for statistical purposes. The purpose of a randomly assigned numeric identifier is to allow the Gracenote service to count queries without knowing anything about who you are. For more information, see the web page for the Gracenote Privacy Policy for the Gracenote service.
The Gracenote Software and each item of
Gracenote Data are licensed to you “AS IS.”
Gracenote makes no representations or warranties, express or implied, regarding the accuracy of any Gracenote Data from in the
Gracenote Servers. Gracenote reserves the right to delete data from the Gracenote Servers or to change data categories for any cause that
Gracenote deems sufficient. No warranty is made that the Gracenote Software or
Gracenote Servers are error-free or that functioning of Gracenote Software or
Gracenote Servers will be uninterrupted.
Gracenote is not obligated to provide you with new enhanced or additional data types or categories that Gracenote may provide in the future and is free to discontinue its services at any time.
GRACENOTE DISCLAIMS ALL
WARRANTIES EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO,
IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, TITLE, AND
NON-INFRINGEMENT. GRACENOTE
DOES NOT WARRANT THE RESULTS
THAT WILL BE OBTAINED BY YOUR
USE OF THE GRACENOTE SOFTWARE
OR ANY GRACENOTE SERVER. IN NO
CASE WILL GRACENOTE BE LIABLE
FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES OR FOR ANY
LOST PROFITS OR LOST REVENUES.
© 2000 to present. Gracenote, Inc.
Getting Started
Guide to Parts and Controls
Front panel
1 2 34
6 5
A Disc tray
B Z (open/close)
C [/1 (on/standby)
Turns on the player, or sets to standby mode.
D
(USB) jack
Connect a USB device to this jack.
E Power indicator
Lights up when the player is turned on.
F Remote sensor
To lock the disc tray (Child Lock)
You can lock the disc tray to avoid accidental opening of the tray.
While the player is turned on, press x (stop), HOME, and then TOP MENU button on the remote to lock or unlock the tray.
9
10
Rear panel
A DC IN 12 V (AC adaptor input) jack
B LAN (100) terminal
C HDMI OUT jack
D DIGITAL OUT (COAXIAL) jack
Remote
The available functions of the remote are different depending on the disc or the situation.
TOP MENU
RETURN
SEN
SUBTITLE
HOME
POP UP/
MENU
OPTIONS
AUDIO
DISPLAY
z
N
,
2 +
, and AUDIO buttons have a tactile dot. Use the tactile dot as a reference when operating the player.
A Z (open/close)
Opens or closes the disc tray.
-TV- t (TV input select)
Switches between TV and other input sources.
-TV- [/1 (TV on/standby)
Turns on the TV, or sets to standby mode.
[/1 (on/standby)
Turns on the player, or sets to standby mode.
B Colour buttons (red/green/
yellow/blue)
Shortcut keys for interactive functions.
C TOP MENU
Opens or closes the BD’s or DVD’s
Top Menu.
POP UP/MENU
Opens or closes the BD-ROM’s
Pop-up Menu, or the DVD’s menu.
Displays the available options on the screen.
RETURN
Returns to the previous display.
</M/m/,
Moves the highlight to select a displayed item.
b
M/m as a shortcut key for track search during music CD playback.
Centre button (ENTER)
Enters the selected item.
HOME
Enters the player’s home menu.
Displays the wall paper when pressed on the category icon of the home menu.
11
12
Accesses the “Sony Entertainment
Network™” online service.
NET SERVICE
Returns to the previous online service portal.
D m/M (fast reverse/fast
forward)
• Fast reverse/fast forward the disc when you press the button during playback. The search speed changes each time you press the button during video playback.
• Plays in slow motion, when pressed for more than one second in pause mode.
• Plays one frame at a time, when you press for a short time in pause mode.
N (play)
Starts or re-starts playback.
./> (previous/next)
Skips to the previous/next chapter, track, or file.
X (pause)
Pauses or re-starts playback.
x (stop)
Stops playback and remembers the stop point (resume point).
The resume point for a title/track is the last point you played or the last photo for a photo folder.
Selects the subtitle language when multi-lingual subtitles are recorded on BD-ROMs/DVD VIDEOs.
2 (volume) +/–
Adjusts the TV volume.
Selects the language track when multi-lingual tracks are recorded on
BD-ROMs/DVD VIDEOs.
Selects the sound track on CDs.
(muting)
Turns off the sound temporarily.
Displays the playback and web browsing (BDP-S4200 only) information on the screen.
Home menu display
The home menu appears when you press
HOME. Select a category using </,.
Select an item using M/m, and press
ENTER.
Item
Category
[Setup]: Adjusts the player settings.
[Photo]: Displays photos.
[Music]: Plays music.
[Video]: Plays videos.
[Network]: Displays network items.
Step 1: Connecting the Player
Do not connect the AC power cord (mains lead) until you have made all the connections.
Connecting to your TV
Connect the player to your TV with a High Speed HDMI Cable.
High Speed HDMI Cable
(supplied)
High quality
13
14
Connecting to your AV amplifier (receiver)
Select one of the following connection methods according to the input jacks on your
AV amplifier (receiver). When you select A or B, make the appropriate settings in
the [Audio Settings] setup (page 27).
High Speed HDMI Cable (supplied)
High Speed HDMI Cable
(not supplied)
t Set [BD Audio MIX Setting] (page 27).
Coaxial digital cable
(not supplied)
Step 2: Preparing for
Network Connection
If you are not going to connect the player
to a network, proceed to “Step 3: Easy
Step 3: Easy Setup
When turned on for the first time
Wait for a short while before the player turns on and starts [Easy
Initial Settings].
Wired Setup
Use a LAN cable to connect to the LAN
(100) terminal on the player.
1
Insert two R03 (size AAA)
batteries by matching the 3 and
#
ends on the batteries to the markings inside the battery compartment of the remote.
LAN cable
(not supplied)
Broadband router
ADSL modem/
Cable modem
Internet z
The use of a shielded and straight interface cable (LAN cable) is recommended.
2
Connect the supplied AC adaptor and AC power cord (mains lead) in the numeric order shown below. When removing them, do so in reverse order.
1
to DC IN 12 V
AC adaptor (supplied)
2
AC power cord (mains lead)
(supplied)
3 to mains
15
16
3
Press [/1 to turn on the player.
4
Turn on the TV and set the input selector on your TV. This will show the signal from the player on your TV screen.
5
Perform [Easy Initial Settings].
Follow the on-screen instructions to make the basic settings using
</M/m/, and ENTER on the remote.
</M/m/,
ENTER b
When [Easy Initial Settings] is complete, select [Easy Network Settings] to use the network functions of the player.
Playback
Playing a Disc
For playable discs, see page 35.
1
Switch the input selector on your
TV so that the signal from the player appears on your TV screen.
2
Press Z, and place a disc on the
disc tray.
3
Playing side facing down
Press Z to close the disc tray.
Playback starts.
If playback does not start automatically, select in the
[Photo] category, and press
ENTER.
Enjoying BONUSVIEW/
BD-LIVE
Some BD-ROMs with the “BD-LIVE” logo* have bonus contents and other data that can be downloaded for your enjoyment.
*
1
Connect a USB memory to the
USB jack on the player (page 9).
Use a 1 GB or larger USB memory as your local storage.
2
Prepare for BD-LIVE (BD-LIVE only).
• Connect the player to a network
• Set [BD Internet Connection] in
[BD/DVD Viewing Settings] setup
3
Insert a BD-ROM with
BONUSVIEW/BD-LIVE.
The operation method differs depending on the disc. Refer to the instruction manual supplied with the disc.
z
To delete data in the USB memory, select
[Delete BD Data] in the [Video] category, and press ENTER. All data stored in the buda folder will be erased.
17
18
Enjoying Blu-ray 3D
(BDP-S4200 only)
Displaying the play information
You can enjoy a Blu-ray 3D Disc with the “Blu-ray 3D” logo*.
*
1
Prepare for Blu-ray 3D Disc playback.
• Connect the player to your
3D-compatible devices using a
High Speed HDMI Cable.
• Set [3D Output Setting] and [TV
Screen Size Setting for 3D] in the
[Screen Settings] setup (page 25).
2
Insert a Blu-ray 3D Disc.
The operation method differs depending on the disc. Refer to the instruction manual supplied with the disc.
You can view the playback information, etc., by pressing DISPLAY.
The displayed information differs depending on the disc type and player status.
Example: when playing a BD-ROM z
Refer also to the instruction manuals supplied with your TV and the connected device.
A Output resolution/Video frequency
B Title number or name
C The currently selected angle
D The currently selected audio setting
E Available functions ( audio, subtitle) angle,
F Playback information
Displays the Play mode, Playing status bar, Disc type, Video codec,
Bitrate, Repeat type, Elapsed time, and Total playing time.
G Chapter number
Playing from a USB
Device
3
Select an Internet content and a variety of on-demand
entertainment using </M/m/,,
and press ENTER.
For “Playable types of files”, see page 36.
1
Connect the USB device to the
USB jack on the player (page 9).
Refer to the instruction manual supplied with the USB device before connecting.
Video streaming control panel
The control panel appears when the video file starts playing. The displayed items may differ depending on Internet content providers.
To display again, press DISPLAY.
2
Select [Video], [Music], or [Photo] category on the
home menu using </,.
3
Select [USB
M/m, and press ENTER.
Playing via a Network
Enjoying Sony Entertainment
Network
Sony Entertainment Network serves as a gateway, delivering the selected Internet content and a variety of on-demand entertainment straight to your player.
A Control display
Press </M/m/, or ENTER for playback operations.
B Playing status bar
Status bar, Cursor indicating the current position, Playing time,
Duration of the video file
C Network condition
indicates the wired connection.
D Network transmission speed
E The file name of the next video
F The file name of the current video selection z
• Some Internet content requires registration via a PC before it can be played.
• Some Internet content may not be available in some regions/countries.
1
Connect the player to a network
(page 15).
2
Press SEN button on the remote.
19
20
Playing files on a Home
Network (DLNA) (BDP-S4200 only)
A DLNA-compatible product can play video/music/photo files stored on another DLNA-compatible product via a network.
1
Prepare to use DLNA.
• Connect the player to a network
• Prepare the other necessary
DLNA-compatible products.
Refer to the instruction manual supplied with the product.
To play a file from a DLNA server via this unit (DLNA player)
To play a file from a DLNA server via another product (Renderer)
When you play files from a DLNA
Server on this unit, you can use a DLNA
Controller-compatible product (a phone, etc.), to control playback.
Server
Renderer
Controller
Control this unit using a DLNA controller. Refer to the instruction manual supplied with the DLNA controller.
Using “TV SideView”
(BDP-S4200 only)
Server
Player
Select the DLNA server icon from category, then choose the file you want to play.
“TV SideView” is a free mobile application for remote devices (such as smartphone, etc.). By using “TV
SideView” with this player, you can easily enjoy the player by using the operation on your remote device. You can launch a service or application directly from the remote device and view the disc information during disc playback. “TV SideView” also can be used as a remote control and software keyboard.
Before you use the “TV SideView” device with this player for the first time, be sure to register the “TV SideView” device. Follow the on-screen instructions on the “TV SideView” device for registration.
b
The registration can only be performed on the
Home Menu.
Available Options
Various settings and playback operations are available by pressing
OPTIONS. The available items differ depending on the situation.
Common options
x x
[Repeat Setting]:
Sets the repeat mode.
[3D Menu] (BDP-S4200 only):
x x x
– [Simulated 3D]: Adjusts the simulated 3D effect.
– [3D Depth Adjustment]: Adjusts the depth of 3D image.
– [2D Playback]: Sets playback to 2D image.
[Play]/[Stop]:
Starts or stops the playback.
[Play from start]:
Plays the item from the beginning.
[Change Category]: Switches category between [Video],
[Music] and [Photo] category.
x x x
[Video] only
[3D Output Setting] (BDP-S4200
only): Sets whether or not to output
3D video automatically.
[A/V SYNC]:
Adjusts the gap between picture and sound, by delaying the sound output in relation to the picture output (0 to 120 milliseconds).
[Video Settings]:
x
– [Picture Quality Mode]: Selects the picture settings for different lighting environments.
– [BNR]: Reduces the mosaic-like block noise in the picture.
– [MNR]: Reduces minor noise around the picture outlines
(mosquito noise).
[Pause]:
Pauses the playback.
x x x x x x x x x x
[Top Menu]:
Displays the BD’s or
DVD’s Top Menu.
[Menu]/[Popup Menu]:
Displays the
BD-ROM’s Pop-up Menu or DVD’s menu.
[Title Search]:
Searches for a title on
BD-ROMs/DVD VIDEOs and starts playback from the beginning.
[Chapter Search]:
Searches for a chapter and starts playback from the beginning.
[Audio]:
Switches the language track when multilingual tracks are recorded on BD-ROMs/DVD VIDEOs. Selects the sound track on CDs.
[Subtitle]:
Switches the subtitle language when multilingual subtitles are recorded on BD-ROMs/DVD
VIDEOs.
[Angle]:
Switches to other viewing angles when multi-angles are recorded on BD-ROMs/DVD
VIDEOs.
[Number Entry]:
Selects the number by using </M/m/, key on the remote.
[IP Content Noise Reduction]:
Adjusts the picture quality of Internet contents.
[Video Search] (BDP-S4200 only):
Displays information on the
BD-ROM/DVD-ROM based on
Gracenote technology.
Searches for related information using keywords from Gracenote when selecting [Cast] or [Related].
Displays a list of titles when selecting
[Playback History] or [Search
History].
21
22
[Music] only
x x x
[Track Search]:
Searches the track number during music CD playback.
[Add Slideshow BGM]:
Registers music files in the USB memory as slideshow background music (BGM).
[Music Search] (BDP-S4200 only):
Displays information on the audio CD
(CD-DA) based on Gracenote technology.
Searches for related information using keywords from Gracenote when selecting [Track], [Artist] or
[Related].
Displays a list of titles when selecting
[Playback History] or [Search
History].
[Photo] only
x x x x x x x x
[Slideshow Speed]:
Changes the slideshow speed.
[Slideshow Effect]:
Sets the effect for slideshows.
[Slideshow BGM]:
– [Off]: Turns off the function.
– [My Music from USB]: Sets the music files registered in [Add
Slideshow BGM].
– [Play from Music CD]: Sets the tracks in CD-DAs.
[Change Display]:
Switches between [Grid View] and [List View].
[View Image]:
Displays the selected photo.
[Slideshow]:
Plays a slideshow.
[Rotate Left]:
Rotates the photo counterclockwise by 90 degrees.
[Rotate Right]:
Rotates the photo clockwise by 90 degrees.
Internet browser display
Internet (BDP-S4200 only)
Browsing Websites
You can connect to the Internet and enjoy websites.
1
Prepare the Internet Browser.
Connect the player to a network
2
Select [Network] on the home
menu using </,.
3
Select [Internet
using M/m, and press ENTER.
z
This browser does not support some websites functions, and some websites may not be shown correctly.
To enter a URL
Select [URL entry] from the options menu. Enter the URL using the software keyboard, then select [Enter].
To set the default start page
While displaying the page you want to set, select [Set as start page] from the options menu.
To return to the previous page
Select [Previous page] from the options menu.
When the previous page does not appear even if you select [Previous page], select
[Window List] from the options menu and select the page you want to return to from the list.
To quit the Internet browser
Press HOME.
You can check the website information by pressing DISPLAY.
The display information differs depending on the website and page status.
A Page title
B Page address
C Cursor
Move by pressing
</M/m/,.
Place the cursor on the link you want to view, then press ENTER. The linked website is displayed.
D SSL icon
Displays when the website is protected and connected safely.
E Progress bar/Loading icon
Appears when the page is being read, or during file download/ transfer.
F Text input field
Press ENTER and select [Input] from the options menu to display the software keyboard.
G Scroll bar
Press
</M/m/, to move the page display left, up, down or right.
23
24
Available options
Various settings and operations are available by pressing OPTIONS.
The available items differ depending on the situation.
x
[Browser Setup]:
Displays the
Internet Browser settings.
x x x x x x x x x x
– [Zoom]: Increases or decreases the size of the displayed contents.
– [JavaScript Setup]: Enables or disables JavaScript.
– [Cookie Setup]: Sets whether or not to accept cookies.
– [SSL Alarm Display]: Enables or disables SSL.
[Input]:
Displays the software keyboard to enter characters while browsing a website.
[Break]:
Moves the cursor to the next line in the text input field.
[Delete]:
Erases one character on the left side of the cursor during text input.
[Window List]:
Displays a list of currently opened website windows.
Allows you to return to a previously displayed website by selecting the window.
[Bookmark List]:
Displays the bookmark list.
[URL entry]:
Allows you to enter a
URL when the software keyboard is displayed.
[Previous page]/[Next page]:
Moves to the previous/next page.
[Cancel loading]:
Stops loading a page.
[Reload]:
Reloads the same page.
[Add to Bookmark]:
Adds the currently displayed website to the bookmark list.
x x x x
[Set as start page]:
Sets the currently displayed website as the default start page.
[Open in new window]:
Opens a link in a new window.
[Character encoding]:
Sets the character code.
[Display certificate]:
View server certificates sent from pages that support SSL.
Settings and Adjustments
Using the Settings
Displays
Select [Setup] on the home menu when you need to change the settings of the player.
The default settings are underlined.
1
Select [Setup] on the home
menu using </,.
2
Select the setup category icon
using M/m, and press ENTER.
[Software Update]
x [Update via Internet]
Updates the player’s software using available network. Make sure that the network is connected to the Internet. For
details, see “Step 2: Preparing for
Network Connection” (page 15).
x [Update via USB Memory]
Updates the player’s software using
USB memory. Make sure that the
Software Update Folder is correctly named as “UPDATE” and all the update files must be stored in this folder. The player can recognise up to 500 files/ folders in a single layer including the update files/folders.
z
• We recommend performing the software update every 2 months or so.
• For information about update functions, consult your nearest Sony dealer or local authorised Sony Service facility. You can also visit the following website: http://www.sony-asia.com/support/
[Screen Settings]
x [3D Output Setting]
(BDP-S4200 only)
[Auto]: Normally select this.
[Off]: Select this to display all content in
2D.
x [TV Screen Size Setting for 3D]
(BDP-S4200 only)
Sets the screen size of your
3D-compatible TV.
x [TV Type]
[16:9]: Select this when connecting to a wide-screen TV or a TV with a wide mode function.
[4:3]: Select this when connecting to a
4:3 screen TV without a wide mode function.
x [Screen Format]
[Full]: Select this when connecting to a
TV with a wide mode function. Displays a 4:3 screen picture in 16:9 aspect ratio even on a wide-screen TV.
[Normal]: Changes the picture size to fit the screen size with the original picture aspect ratio.
25
x [DVD Aspect Ratio]
[Letter Box]: Displays a wide picture with black bands on the top and bottom.
[Pan & Scan]: Displays a full-height picture on the entire screen, with trimmed sides.
x [DVD-ROM 24p Output]
[Auto]: Outputs 1920 × 1080p/24 Hz video signals only when connecting a
1080/24p-compatible TV using the
HDMI OUT jack.
[Off]: Select this when your TV is not compatible with 1080/24p video signals.
x [YCbCr/RGB (HDMI)]
[Auto]: Automatically detects the connected TV type, and switches to the matching colour setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video signals.
[RGB]: Outputs RGB video signals.
x [Cinema Conversion Mode]
[Auto]: Normally select this. The player automatically detects whether the material is video-based or film-based, and switches to the appropriate conversion method.
[Video]: The conversion method suited for video-based material will always be selected regardless of the material.
x [HDMI Deep Colour Output]
[Auto]: Normally select this.
[16bit]/[12bit]/[10bit]: Outputs 16bit/
12bit/10bit video signals when the connected TV is compatible with Deep
Colour.
[Off]: Select this when the picture is unstable or colours appear unnatural.
x [Output Video Resolution]
Normally select [Auto]. Select [Original
Resolution] to output the resolution recorded on the disc. When the resolution is lower than the SD resolution, it is scaled up to the SD resolution.
x [Pause Mode]
[Auto]: Normally select this. Dynamic moving pictures appear without blurring.
[Frame]: Displays static pictures at high resolution.
26
x [BD-ROM 24p Output]
[Auto]: Outputs 1920 × 1080p/24 Hz video signals only when connecting a
1080/24p-compatible TV using the
HDMI OUT jack.
[On]: Turns on the function.
[Off]: Select this when your TV is not compatible with 1080/24p video signals.
[Audio Settings]
x [Digital Audio Output]
[Auto]: Normally select this. Outputs audio signals according to the status of the connected devices.
[PCM]: Outputs PCM signals from the
DIGITAL OUT (COAXIAL)/HDMI
OUT jack.
x [BD Audio MIX Setting]
[On]: Outputs the audio obtained by mixing the interactive and secondary audio to the primary audio.
[Off]: Outputs the primary audio only.
Select this to output HD audio signals to an AV amplifier (receiver).
x [Dolby D Compatible Output]
[On]: Converts DTS audio source to
Dolby Digital audio by using EDID
(Extended Display Identification Data).
[Off]: Turns off the function.
x [Audio DRC]
[Auto]: Performs playback at the dynamic range specified by the disc
(BD-ROM only). Other discs are played back at the [On] level.
[On]: Performs playback at a standard compression level.
[Off]: No compression works. A more dynamic sound is produced.
x [Downmix]
[Surround]: Outputs audio signals with surround effects. Select this when connecting an audio device that supports
Dolby Surround (Pro Logic) or DTS
Neo:6.
[Stereo]: Outputs audio signals without surround effects. Select this when connecting an audio device that does not support Dolby Surround (Pro Logic) or
DTS Neo:6.
[BD/DVD Viewing
Settings]
x [BD/DVD Menu Language]
Selects the default menu language for
BD-ROMs or DVD VIDEOs.
Select [Select Language Code], and enter the code for your language,
referring to “Language code list”
x [Audio Language]
Selects the default track language for
BD-ROMs or DVD VIDEOs.
When you select [Original], the language given priority in the disc is selected.
Select [Select Language Code], and enter the code for your language,
referring to “Language code list”
x [Subtitle Language]
Selects the default subtitle language for
BD-ROMs or DVD VIDEOs.
Select [Select Language Code], and enter the code for your language,
referring to “Language code list”
27
28
x [BD Hybrid Disc Playback Layer]
[BD]: Plays BD layer.
[DVD/CD]: Plays DVD or CD layer.
x [BD Internet Connection]
[Allow]: Normally select this.
[Do not allow]: Prohibits Internet connection.
x [Internet Video Unrated]
[Allow]: Allows the playback of unrated
Internet videos.
[Block]: Blocks the playback of unrated
Internet videos.
[System Settings]
[Parental Control
Settings]
x [Password]
Sets or changes the password for the
Parental Control function. A password allows you to set a restriction on
BD-ROM or DVD VIDEO, and Internet video playback. If necessary, you can differentiate the restriction levels for
BD-ROMs, DVD VIDEOs, and Internet videos.
x [Parental Control Area Code]
Playback of some BD-ROMs, DVD
VIDEOs, or Internet videos can be limited according to the geographic area.
Scenes may be blocked or replaced with different scenes. Follow the on-screen instructions and enter your four-digit password.
x [BD Parental Control] /
[DVD Parental Control] /
[Internet Video Parental Control]
By setting Parental Control, scenes can be blocked or replaced with different scenes. Follow the on-screen instructions and enter your four-digit password.
x [OSD Language]
Selects on-screen display language for your player.
x [HDMI Settings]
By connecting Sony components that are compatible with HDMI functions with a
High Speed HDMI Cable, operation is simplified.
[Control for HDMI]
[On]: The following BRAVIA Sync features are available:
– One-Touch Play
– System Power-Off
– Language Follow
[Off]: Turns off the function.
z
For details, refer to the instruction manual supplied with the TV or components.
[Linked to TV-off]
[On]: Automatically turns off the player and HDMI-compatible components when the connected TV enters standby mode (BRAVIA Sync).
[Off]: Turns off the function.
x [Startup Screen]
Set the startup screen when turning on the player.
[Network Service Screen]: Starts on
Sony Entertainment Network portal screen.
[Home Menu Screen]: Starts on home menu.
x [Quick Start Mode]
[On]: Shortens the startup time when turning on the player.
[Off]: Reduces standby power consumption.
x [Auto Standby]
[On]: Automatically returns to standby mode if no button is pressed for more than 20 minutes.
[Off]: Turns off the function.
x [Auto Display]
[On]: Automatically displays information on the screen when changing the viewing titles, picture modes, audio signals, etc.
[Off]: Displays information only when you press DISPLAY.
x [Screen Saver]
[On]: Turns on the screen saver function.
The screen saver image appears when you do not use the player for more than
10 minutes while an on-screen display is displayed.
[Off]: Turns off the function.
x [Software Update Notification]
[On]: Sets the player to inform you of newer software version information
[Off]: Turns off the function.
x [Gracenote Settings] (BDP-S4200
only)
[Auto]: Automatically downloads disc information when disc playback stops.
Connect to the network for downloading.
[Manual]: Downloads the disc information when [Video Search] or
[Music Search] is selected.
x [Device Name] (BDP-S4200 only)
Displays the player’s name. The player’s name can be changed.
x [System Information]
Displays the player’s software version information and the MAC address.
x [Software License Information]
Displays information about the Software
License.
[Network Settings]
x [Internet Settings]
Connect the player to the network
beforehand. For details, see “Step 2:
Preparing for Network Connection”
x [Network Connection Status]
Displays the current network status.
x [Network Connection
Diagnostics]
Checks for the proper network connection by running the network diagnostics.
29
30
x [Connection Server Settings]
(BDP-S4200 only)
Sets whether or not to display the connected server.
x [Auto Renderer Access
Permission] (BDP-S4200 only)
[On]: Allows automatic access from newly detected DLNA controllercompatible product.
[Off]: Turn off the function.
[Easy Network
Settings]
Select [Easy Network Settings] to specify the network settings. Follow the on-screen instructions.
[Resetting]
x [Renderer Access Control]
(BDP-S4200 only)
Displays a list of DLNA controllercompatible products and sets whether or not each product is accessible via this player.
x [Reset to Factory Default Settings]
Resets the player settings to the factory default by selecting the group of settings.
All the settings within the group will be reset.
x [Registered Remote Devices]
(BDP-S4200 only)
Displays a list of your registered remote devices.
x [Remote Start]
[On]: Turns the player on or off using your remote device when connecting to the network.
[Off]: Turns off the functions.
x [Initialise Personal Information]
Erases your personal information stored in the player.
b
If you dispose, transfer or resell this unit, please delete all Personal Information for security purposes. Please take the appropriate measures such as logging out after using a network service.
Additional Information
Troubleshooting
If you experience any of the following difficulties while using the player, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer.
The display language on the screen switches automatically when connected to the HDMI OUT jack.
, When [Control for HDMI] in [HDMI
Settings] is set to [On] (page 28), the
display language on the screen automatically switches according to the language setting of the connected
TV (if you change the setting on your
TV, etc.).
Sound
Picture
There is no picture or the picture is not output correctly.
, Check that all the connecting cables
are securely connected (page 13).
, Switch the input selector on your TV to display the signal from the player.
, Reset the [Output Video Resolution] to the lowest resolution by pressing x (stop), HOME, and then POP UP/
MENU button on the remote.
, Try the following: 1Turn the player off and on again. 2Turn the connected equipment off and on again.
3
Disconnect and then reconnect the
HDMI cable.
, The HDMI OUT jack is connected to a
DVI device that does not support copyright protection technology.
, Check the [Output Video Resolution] settings in the [Screen Settings] setup
, For BD-ROMs, check the [BD-ROM
24p Output] setting in the [Screen
, For DVD-ROMs, check the
[DVD-ROM 24p Output] setting in the
[Screen Settings] setup (page 26).
There is no sound or the sound is not output correctly.
, Check that all the connecting cables
are securely connected (page 13).
, Switch the input selector on your AV amplifier (receiver) so that the audio signals of the player are output from your AV amplifier (receiver).
, If the audio signal does not come through the DIGITAL OUT
(COAXIAL)/HDMI OUT jack, check
, For HDMI connections, try the following: 1Turn the player off and on again. 2Turn the connected equipment off and on again.
3
Disconnect and then reconnect the
HDMI cable.
, For HDMI connections, if the player is connected to a TV through an AV amplifier (receiver), try connecting the
HDMI cable directly to the TV. Refer also to the instruction manual supplied with the AV amplifier (receiver).
, The HDMI OUT jack is connected to a
DVI device (DVI jacks do not accept audio signals).
31
32
, The device connected to the HDMI
OUT jack does not support the audio format of the player. Check the audio
The HD Audio (Dolby Digital Plus,
Dolby TrueHD, DTS-HD High
Resolution Audio, and DTS-HD
Master Audio) is not output by bitstream.
, Set [BD Audio MIX Setting] in [Audio
Settings] setup to [Off] (page 27).
, Check that the connected AV amplifier
(receiver) is compatible with each HD
Audio format.
Disc
The disc does not play.
, The disc is dirty or skewed.
, The disc is upside down. Insert the disc with the playback side facing down.
, The disc has a format that cannot be
played back by this player (page 35).
, The player cannot play a recorded disc that is not correctly finalised.
, The region code on the BD or DVD does not match the player.
The interactive audio is not output.
, Set [BD Audio MIX Setting] in [Audio
Settings] setup to [On] (page 27).
Message Code 3 [Audio outputs temporarily muted. Do not adjust the playback volume. The content being played is protected by Cinavia and is not authorized for playback on this device. For more information, see http://www.cinavia.com. Message
Code 3.] appears on the screen when playing a disc.
, The audio track of the video that you are playing contains a Cinavia code indicating that it is an unauthorised copy of professionally-produced
USB device
The player does not detect a USB device connected to the player.
, Make sure that the USB device is securely connected to the USB jack.
, Check if the USB device or a cable is damaged.
, Check if the USB device is on.
, If the USB device is connected via a
USB hub, connect the USB device directly to the player.
Sony Entertainment Network
The picture/sound is poor/certain programmes display a loss of detail, especially during fast-motion or dark scenes.
, Picture/sound quality may be improved by changing the connection speed. Recommended connection speed is of at least 2.5 Mbps for standard definition video (10 Mbps for high definition video).
The picture is small.
, Press M to zoom in.
Network connection
The player cannot connect to the network.
, Check the network connection
(page 15) and the network settings
The message [A new software version is available. Please go to the “Setup” section of the menu and select
“Software update” to perform the update.] appears on the screen when turning the player on.
, See [Software Update] (page 25) to
update the player to a newer software version.
Control for HDMI (BRAVIA
Sync)
The [Control for HDMI] function does not work (BRAVIA Sync).
, Check that [Control for HDMI] in
[HDMI Settings] is set to [On]
, If you change the HDMI connection, turn the player off and on again.
, If power failure occurs, set [Control for HDMI] in [HDMI Settings] to
[Off], then set [Control for HDMI] in
[HDMI Settings] to [On] (page 28).
, Check the following and refer to the instruction manual supplied with the component.
– the connected component is compatible with the [Control for
HDMI] function.
– the connected component’s setting for the [Control for HDMI] function is correct.
, When you connect the player to a TV through an AV amplifier (receiver),
– if the AV amplifier (receiver) is not compatible with the [Control for
HDMI] function, you may be unable to control the TV from the player.
– if you change the HDMI connection, disconnect and reconnect the AC power cord
(mains lead), or a power failure occurs, try the following: 1Switch the input selector of the AV amplifier (receiver) so that the picture from the player appears on the TV screen. 2Set [Control for
HDMI] in [HDMI Settings] to [Off], then set [Control for HDMI] in
[HDMI Settings] to [On] (page 28).
Refer to the instruction manual supplied with the AV amplifier
(receiver).
The System Power-Off function does not work (BRAVIA Sync).
, Check that [Control for HDMI] and
[Linked to TV-off] in [HDMI Settings]
Others
Playback does not start from the beginning of content.
, Press OPTIONS, and select [Play from start].
33
34
Playback does not start from the resume point where you last stopped playing.
, The resume point may be cleared from memory depending on the disc when
– you open the disc tray.
– you disconnect the USB device.
– you play other content.
– you turn off the player.
Message Code 1 [Playback stopped.
The content being played is protected by Cinavia and is not authorized for playback on this device. For more information, see http:// www.cinavia.com. Message Code 1.] appears on the screen when playing a disc.
, The audio track of the video that you are playing contains a Cinavia code indicating it was intended for presentation using professional equipment only and is not authorised
for playback by consumers (page 4).
The disc tray does not open and you cannot remove the disc even after you
press Z.
, Try the following: 1Turn the player off, and disconnect the AC power cord
(mains lead). 2Reconnect the AC power cord (mains lead) while pressing down Z on the player.
3
Keep pressing down Z on the player until the tray opens. 4Remove the disc.
Specifications
System
Laser: Semiconductor laser
Inputs and outputs
(Jack name:
Jack type/Output level/Load impedance)
DIGITAL OUT (COAXIAL):
Phono jack/0.5 Vp-p/75 ohms
HDMI OUT:
HDMI 19-pin standard connector
LAN (100):
100BASE-TX Terminal
USB:
USB jack Type A (For connecting a
USB memory, memory card reader, digital still camera, and digital video camera)
DC IN:
BDP-S1200: 12 V DC, 600 mA
BDP-S4200: 12 V DC, 650 mA
General
Power requirements:
12 V DC with AC adaptor
Rating: Input 110 V - 240 V AC,
50/60 Hz
Power consumption (when using AC adaptor):
BDP-S1200: 8.8 W
BDP-S4200: 9.5 W
Dimensions (approx.):
265 mm × 199 mm × 43 mm
(width/depth/height) incl. projecting parts
The player does not respond to any button.
, Moisture has condensed inside the
Mass (approx.): 0.9 kg
Operating temperature:
5 ºC to 35 ºC
Operating humidity:
25 % to 80 %.
Supplied accessories
AC adaptor (AC-M1208WW) (1)
AC power cord (mains lead) (1)
High Speed HDMI Cable (1)
Remote commander (remote) (1)
R03 (size AAA) batteries (2)
Specifications and design are subject to change without notice.
Playable discs
Blu-ray
Disc
DVD
CD
*3
*1
*3
BD-ROM
BD-R
*2
/BD-RE
*2
DVD-ROM
DVD-R/DVD-RW
DVD+R/DVD+RW
CD-DA (Music CD)
CD-ROM
CD-R/CD-RW
*1
Since the Blu-ray Disc specifications are new and evolving, some discs may not be playable depending on the disc type and the version.
The audio output differs depending on the source, connected output jack, and selected
*2 audio settings.
BD-RE: Ver.2.1
BD-R: Ver.1.1, 1.2, 1.3 including organic pigment type BD-R (LTH type)
The BD-Rs recorded on a PC cannot be played if postscripts are recordable.
*3
A CD or DVD disc will not play if it has not been correctly finalised. For more information, refer to the instruction manual supplied with the recording device.
Discs that cannot be played
• BDs with cartridge
• BDXLs
• DVD-RAMs
• HD DVDs
• DVD Audio discs
• PHOTO CDs
• Data part of CD-Extras
• Super VCDs
• Audio material side on DualDiscs
Note on Discs
This product is designed to playback discs that conform to the Compact Disc
(CD) standard. DualDiscs and some of the music discs encoded with copyright protection technologies do not conform to the Compact Disc (CD) standard, therefore, these discs may not be playable by this product.
Note on playback operations of BDs/
DVDs
Some playback operations of BDs/
DVDs may be intentionally set by software producers. Since this player plays BDs/DVDs according to the disc contents the software producers designed, some playback features may not be available.
Note about double-layer BDs/DVDs
The playback pictures and sound may be momentarily interrupted when the layers switch.
Region code (BD-ROM/DVD VIDEO only)
Your player has a region code printed on the rear of the unit and will only play
BD-ROMs/DVD VIDEOs labelled with identical region codes or
ALL
.
Region code
35
36
Playable types of files
Video
Codec
MPEG-1
Video
*1
MPEG-2
Video
*2
Container Extension
PS
With Audio
.mpg, .mpeg Dolby Digital, DTS, LPCM, MPEG
MKV
PS
*3
TS
*4
MKV
*1
3gpp/
3gpp2
*6
.mkv
Dolby Digital, LPCM, AAC, MP3
.mpg, .mpeg Dolby Digital, DTS, LPCM, MPEG
.m2ts, .mts
.mkv
Xvid
AVI
MKV
MKV
*1
.avi
.mkv
.mkv
Dolby Digital, LPCM, WMA9, MP3
Dolby Digital, LPCM, AAC, MP3
Dolby Digital, LPCM, AAC, MP3
MPEG4/AVC
*5
MP4
*1
TS
*1
.mp4, .m4v
AAC
.m2ts, .mts
Dolby Digital, DTS, LPCM, MPEG, AAC
Quick Time
*6
.mov
FLV
*6
.flv, .f4v
Dolby Digital, LPCM, AAC, MP3
LPCM, AAC, MP3
.3gp, .3g2,
.3gpp, .3gp2
Dolby Digital, DTS, LPCM, MPEG, AAC
Dolby Digital, LPCM, AAC, MP3
AAC
VC1
*1
WMV9
*1
TS
MKV
ASF
MKV
.m2ts, .mts
.mkv
.wmv, .asf
.mkv
Motion JPEG
*6
Quick Time .mov
AVI .avi
Dolby Digital, DTS, LPCM, MPEG, AAC
Dolby Digital, LPCM, AAC, MP3
WMA9
Dolby Digital, LPCM, AAC, MP3
Dolby Digital, LPCM, AAC, MP3
Dolby Digital, LPCM, AAC, MP3
Format
AVCHD (Ver.2.0)
*1*7*8
Music
Codec Extension
MP3 (MPEG-1 Audio
Layer III)
*9
.mp3
AAC/HE-AAC
*1*9
WMA9 Standard
*1
.m4a, .aac
*6
.wma
LPCM
*9
FLAC
*6
Dolby Digital
*6*9
.wav
.flac, .fla
.ac3
Photo
JPEG
PNG
GIF
MPO
Format Extension
.jpeg, .jpg, .jpe
.png
*10
.gif
*10
.mpo
*6*11
*1
*2
*3
*4
*5
*6
*7
*8
The player may not play this file format on a DLNA server (BDP-S4200 only).
The player can only play standard definition video on a DLNA server
(BDP-S4200 only).
The player does not play DTS format files on a DLNA server (BDP-S4200 only).
The player can only play Dolby Digital format files on a DLNA server
(BDP-S4200 only).
The player can support AVC up to Level
4.1.
The player does not play this file format on a DLNA server (BDP-S4200 only).
The player can support frame rate up to
60 fps.
The player plays AVCHD format files that are recorded on a digital video camera, etc.
The AVCHD format disc will not play if it has not been correctly finalised.
*9
The player can play “.mka” files.
(This file cannot be played on a DLNA
*10 server (BDP-S4200 only).)
The player does not play animated PNG or
*11 animated GIF files.
For MPO files other than 3D, the key image or the first image is displayed
(BDP-S4200 only).
b
• Some files may not play depending on the file format, the encoding, or recording condition (BDP-S1200 only).
• Some files may not play depending on the file format, file encoding, recording condition, or DLNA server condition
(BDP-S4200 only).
• Some files edited on a PC may not play.
• Some files may not be able to perform fast forward or fast reverse function.
• The player does not play coded files such as
DRM and Lossless.
• The player can recognise the following files or folders in BDs, DVDs, CDs and USB devices:
– up to folders in the 9th layer, including the root folder.
– up to 500 files/folders in a single layer.
• The player can recognise the following files or folders stored in the DLNA server
(BDP-S4200 only):
– up to folders in the 19th layer.
– up to 999 files/folders in a single layer.
• The player can support frame rate:
– up to 60 fps for AVCHD (MPEG4/AVC) only.
– up to 30 fps for other video codecs.
• The player can support video bit rate up to
40 Mbps.
• Some USB devices may not work with this player.
37
38
• The player can recognise Mass Storage
Class (MSC) devices (such as flash memory or an HDD), Still Image Capture Device
(SICD) class devices and 101 keyboard.
• To avoid data corruption or damage to the
USB memory or devices, turn off the player when connecting or removing the USB memory or devices.
• The player may not play high bit rate video files on DATA CDs smoothly. It is recommended to play such files using
DATA DVDs or DATA BDs.
• Do not use the following discs.
– A lens cleaning disc.
– A disc that has a non-standard shape
(e.g., card, heart).
– A disc with a label or sticker on it.
– A disc that has cellophane tape or sticker adhesive on it.
• Do not resurface the playing side of a disc to remove surface scratches.
Notes About the Discs
Code numbers of controllable
TVs
• To keep the disc clean, handle the disc by its edge. Do not touch the surface.
Dust, fingerprints, or scratches on the disc may cause it to malfunction.
• Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature may rise considerably inside the car.
• After playing, store the disc in its case.
• Clean the disc with a cleaning cloth. Wipe the disc from the centre out.
• Do not use solvents such as benzine, thinner, commercially available disc/ lens cleaners, or anti-static spray intended for vinyl LPs.
• If you have printed the disc’s label, dry the label before playing.
Hold down -TV- [/1 and the TV manufacturer’s code using the remote buttons for 2 seconds.
If more than one remote button is listed, try entering them one at a time until you find the one that works with your TV.
Manufacturer
Sony (Default)
Philips
Panasonic
Hitachi
Sharp
Toshiba
Loewe
Samsung
LG/Goldstar
Remote Button
Colour button
(red)
Colour button
(green) / Colour button (yellow) /
RETURN
Colour button
(blue) / Centre button (ENTER)
TOP MENU
M
POP UP/MENU
<
, m
Language code list
For details, see [BD/DVD Viewing
The language spellings conform to the
ISO 639: 1988 (E/F) standard.
Code Language
1027 Afar
1032 Afrikaans
1044 Arabic
1051 Aymara
1053 Bashkir
1059 Bulgarian
1061 Bislama
1028 Abkhazian
1039 Amharic
1045 Assamese
1052 Azerbaijani
1057 Byelorussian
1060 Bihari
1066 Bengali
1067 Tibetan
1079 Catalan
1097 Czech
1105 Danish
1130 Bhutani;
Dzongkha
1144
1149
1151
1165
English
Spanish
Basque
Finnish
1070
1093
1103
1109
1142
Breton
Corsican
Welsh
German
Greek
1145 Esperanto
1150 Estonian
1157 Persian
1166 Fiji
1171 Faroese
1181 Frisian
1174 French
1183 Irish
1186 Scots Gaelic 1194 Galician
1196 Guarani 1203 Gujarati
1209 Hausa
1226 Croatian
1233 Armenian
1239 Interlingue
1217 Hindi
1229 Hungarian
1235 Interlingua
1245 Inupiak
1248 Indonesian
1254 Italian
1261 Japanese
1283 Javanese
1297 Kazakh
1253
1257
1269
1287
Icelandic
Hebrew
Yiddish
Georgian
1298 Greenlandic;
Kalaallisut
1300 Kannada 1299 Cambodian;
Khmer
1301
1307
Korean
Kurdish
1305 Kashmiri
1311 Kirghiz
1313 Latin 1326 Lingala
1327 Laothian; Lao 1332 Lithuanian
1334 Latvian
1347 Maori
1350 Malayalam
1353 Moldavian
1345 Malagasy
1349 Macedonian
1352 Mongolian
1356 Marathi
Code Language
1357 Malay
1363 Burmese
1369 Nepali
1379 Norwegian
1358 Malese;
Maltese
1365 Nauru
1376 Dutch
1393 Occitan
1403 Oromo
1417 Punjabi;
Panjabi
1408
1428
Oriya
Polish
1435 Pashto;
Pushto
1463 Quechua
1436 Portuguese
1481 Rhaeto-
Romance
1482 Kirundi; Rundi 1483 Romanian
1489 Russian
1495 Sanskrit
1491 Kinyarwanda
1498 Sindhi
1501 Sangho;
Sango
1503 Singhalese;
Sinhalese
1502
1505
Serbo-
Croatian
Slovak
1506 Slovenian
1508 Shona
1507 Samoan
1509 Somali
1511 Albanian 1512 Serbian
1513 Siswati; Swati 1514 Sesotho;
Sotho southern
1515 Sundanese 1516 Swedish
1517 Swahili 1521 Tamil
1525 Telugu
1528 Thai
1527
1529
Tajik
Tigrinya
1531 Turkmen
1534 Setswana;
Tswana
1538 Turkish
1532 Tagalog
1535 Tonga; Tonga islands
1539 Tsonga
1540
1557
1572
1587
1632
1684
Tatar
Ukrainian
Uzbek
Volapük
Xhosa
Chinese
1703 Not specified
1543 Twi
1564 Urdu
1581 Vietnamese
1613 Wolof
1665 Yoruba
1697 Zulu
39
40
Parental control/area code
For details, see [Parental Control Area
Code Area
2044 Argentina
2046 Austria
2070 Brazil
2092 China
2115 Denmark
2174 France
2200 Greece
2047 Australia
2057 Belgium
2090 Chile
2093 Colombia
2165 Finland
2109 Germany
2219 Hong Kong
2248 India
2239 Ireland
2238 Indonesia
2254 Italy
2276 Japan 2304 Korea
2333 Luxembourg 2363 Malaysia
2362 Mexico 2376 Netherlands
2390 New Zealand 2379 Norway
2427 Pakistan
2428 Poland
2424
2436
Philippines
Portugal
2489 Russia
2149 Spain
2501 Singapore
2499 Sweden
2086 Switzerland 2543 Taiwan
2528 Thailand 2184 United
Kingdom
2586 Vietnam
The software of this player may be updated in the future. For information about any available updates and the latest Operating Instructions, please visit the following website:
http://www.sony-asia.com/support/
© 2014 Sony Corporation
4-476-200-41(1)

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Blu-Ray player Black
- Video formats supported: 3G2, 3GP, ASF, AVC, AVI, FLV, M-JPEG, M2TS, M4V, MKV, MOV, MP4, MPEG, MPEG4, MPG, MTS, VC-1, WMV, XVID
- Audio formats supported: AAC, AC3, FLAC, HE-AAC, M4A, MKA, MP3, WAV, WMA
- Dolby TrueHD, DTS-HD Master Audio
- Video upscaling
- Ethernet LAN